summaryrefslogtreecommitdiffstats
path: root/kernel/arch/mips/alchemy/common/time.c
diff options
context:
space:
mode:
Diffstat (limited to 'kernel/arch/mips/alchemy/common/time.c')
-rw-r--r--kernel/arch/mips/alchemy/common/time.c176
1 files changed, 176 insertions, 0 deletions
diff --git a/kernel/arch/mips/alchemy/common/time.c b/kernel/arch/mips/alchemy/common/time.c
new file mode 100644
index 000000000..50e17e13c
--- /dev/null
+++ b/kernel/arch/mips/alchemy/common/time.c
@@ -0,0 +1,176 @@
+/*
+ * Copyright (C) 2008-2009 Manuel Lauss <manuel.lauss@gmail.com>
+ *
+ * Previous incarnations were:
+ * Copyright (C) 2001, 2006, 2008 MontaVista Software, <source@mvista.com>
+ * Copied and modified Carsten Langgaard's time.c
+ *
+ * Carsten Langgaard, carstenl@mips.com
+ * Copyright (C) 1999,2000 MIPS Technologies, Inc. All rights reserved.
+ *
+ * ########################################################################
+ *
+ * This program is free software; you can distribute it and/or modify it
+ * under the terms of the GNU General Public License (Version 2) as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
+ * for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
+ *
+ * ########################################################################
+ *
+ * Clocksource/event using the 32.768kHz-clocked Counter1 ('RTC' in the
+ * databooks). Firmware/Board init code must enable the counters in the
+ * counter control register, otherwise the CP0 counter clocksource/event
+ * will be installed instead (and use of 'wait' instruction is prohibited).
+ */
+
+#include <linux/clockchips.h>
+#include <linux/clocksource.h>
+#include <linux/interrupt.h>
+#include <linux/spinlock.h>
+
+#include <asm/idle.h>
+#include <asm/processor.h>
+#include <asm/time.h>
+#include <asm/mach-au1x00/au1000.h>
+
+/* 32kHz clock enabled and detected */
+#define CNTR_OK (SYS_CNTRL_E0 | SYS_CNTRL_32S)
+
+static cycle_t au1x_counter1_read(struct clocksource *cs)
+{
+ return alchemy_rdsys(AU1000_SYS_RTCREAD);
+}
+
+static struct clocksource au1x_counter1_clocksource = {
+ .name = "alchemy-counter1",
+ .read = au1x_counter1_read,
+ .mask = CLOCKSOURCE_MASK(32),
+ .flags = CLOCK_SOURCE_IS_CONTINUOUS,
+ .rating = 1500,
+};
+
+static int au1x_rtcmatch2_set_next_event(unsigned long delta,
+ struct clock_event_device *cd)
+{
+ delta += alchemy_rdsys(AU1000_SYS_RTCREAD);
+ /* wait for register access */
+ while (alchemy_rdsys(AU1000_SYS_CNTRCTRL) & SYS_CNTRL_M21)
+ ;
+ alchemy_wrsys(delta, AU1000_SYS_RTCMATCH2);
+
+ return 0;
+}
+
+static void au1x_rtcmatch2_set_mode(enum clock_event_mode mode,
+ struct clock_event_device *cd)
+{
+}
+
+static irqreturn_t au1x_rtcmatch2_irq(int irq, void *dev_id)
+{
+ struct clock_event_device *cd = dev_id;
+ cd->event_handler(cd);
+ return IRQ_HANDLED;
+}
+
+static struct clock_event_device au1x_rtcmatch2_clockdev = {
+ .name = "rtcmatch2",
+ .features = CLOCK_EVT_FEAT_ONESHOT,
+ .rating = 1500,
+ .set_next_event = au1x_rtcmatch2_set_next_event,
+ .set_mode = au1x_rtcmatch2_set_mode,
+ .cpumask = cpu_all_mask,
+};
+
+static struct irqaction au1x_rtcmatch2_irqaction = {
+ .handler = au1x_rtcmatch2_irq,
+ .flags = IRQF_TIMER,
+ .name = "timer",
+ .dev_id = &au1x_rtcmatch2_clockdev,
+};
+
+static int __init alchemy_time_init(unsigned int m2int)
+{
+ struct clock_event_device *cd = &au1x_rtcmatch2_clockdev;
+ unsigned long t;
+
+ au1x_rtcmatch2_clockdev.irq = m2int;
+
+ /* Check if firmware (YAMON, ...) has enabled 32kHz and clock
+ * has been detected. If so install the rtcmatch2 clocksource,
+ * otherwise don't bother. Note that both bits being set is by
+ * no means a definite guarantee that the counters actually work
+ * (the 32S bit seems to be stuck set to 1 once a single clock-
+ * edge is detected, hence the timeouts).
+ */
+ if (CNTR_OK != (alchemy_rdsys(AU1000_SYS_CNTRCTRL) & CNTR_OK))
+ goto cntr_err;
+
+ /*
+ * setup counter 1 (RTC) to tick at full speed
+ */
+ t = 0xffffff;
+ while ((alchemy_rdsys(AU1000_SYS_CNTRCTRL) & SYS_CNTRL_T1S) && --t)
+ asm volatile ("nop");
+ if (!t)
+ goto cntr_err;
+
+ alchemy_wrsys(0, AU1000_SYS_RTCTRIM); /* 32.768 kHz */
+
+ t = 0xffffff;
+ while ((alchemy_rdsys(AU1000_SYS_CNTRCTRL) & SYS_CNTRL_C1S) && --t)
+ asm volatile ("nop");
+ if (!t)
+ goto cntr_err;
+ alchemy_wrsys(0, AU1000_SYS_RTCWRITE);
+
+ t = 0xffffff;
+ while ((alchemy_rdsys(AU1000_SYS_CNTRCTRL) & SYS_CNTRL_C1S) && --t)
+ asm volatile ("nop");
+ if (!t)
+ goto cntr_err;
+
+ /* register counter1 clocksource and event device */
+ clocksource_register_hz(&au1x_counter1_clocksource, 32768);
+
+ cd->shift = 32;
+ cd->mult = div_sc(32768, NSEC_PER_SEC, cd->shift);
+ cd->max_delta_ns = clockevent_delta2ns(0xffffffff, cd);
+ cd->min_delta_ns = clockevent_delta2ns(9, cd); /* ~0.28ms */
+ clockevents_register_device(cd);
+ setup_irq(m2int, &au1x_rtcmatch2_irqaction);
+
+ printk(KERN_INFO "Alchemy clocksource installed\n");
+
+ return 0;
+
+cntr_err:
+ return -1;
+}
+
+static int alchemy_m2inttab[] __initdata = {
+ AU1000_RTC_MATCH2_INT,
+ AU1500_RTC_MATCH2_INT,
+ AU1100_RTC_MATCH2_INT,
+ AU1550_RTC_MATCH2_INT,
+ AU1200_RTC_MATCH2_INT,
+ AU1300_RTC_MATCH2_INT,
+};
+
+void __init plat_time_init(void)
+{
+ int t;
+
+ t = alchemy_get_cputype();
+ if (t == ALCHEMY_CPU_UNKNOWN ||
+ alchemy_time_init(alchemy_m2inttab[t]))
+ cpu_wait = NULL; /* wait doesn't work with r4k timer */
+}