diff options
Diffstat (limited to 'kernel/arch/mips/Kconfig')
| -rw-r--r-- | kernel/arch/mips/Kconfig | 294 |
1 files changed, 216 insertions, 78 deletions
diff --git a/kernel/arch/mips/Kconfig b/kernel/arch/mips/Kconfig index 9b95c9b7e..bd8be6a0e 100644 --- a/kernel/arch/mips/Kconfig +++ b/kernel/arch/mips/Kconfig @@ -1,8 +1,11 @@ config MIPS bool default y + select ARCH_SUPPORTS_UPROBES select ARCH_MIGHT_HAVE_PC_PARPORT select ARCH_MIGHT_HAVE_PC_SERIO + select ARCH_USE_CMPXCHG_LOCKREF if 64BIT + select ARCH_USE_BUILTIN_BSWAP select HAVE_CONTEXT_TRACKING select HAVE_GENERIC_DMA_COHERENT select HAVE_IDE @@ -13,7 +16,6 @@ config MIPS select HAVE_ARCH_SECCOMP_FILTER select HAVE_ARCH_TRACEHOOK select HAVE_BPF_JIT if !CPU_MICROMIPS - select ARCH_HAVE_CUSTOM_GPIO_H select HAVE_FUNCTION_TRACER select HAVE_DYNAMIC_FTRACE select HAVE_FTRACE_MCOUNT_RECORD @@ -21,11 +23,12 @@ config MIPS select HAVE_FUNCTION_GRAPH_TRACER select HAVE_KPROBES select HAVE_KRETPROBES + select HAVE_SYSCALL_TRACEPOINTS select HAVE_DEBUG_KMEMLEAK select HAVE_SYSCALL_TRACEPOINTS select ARCH_HAS_ELF_RANDOMIZE select HAVE_ARCH_TRANSPARENT_HUGEPAGE if CPU_SUPPORTS_HUGEPAGES && 64BIT - select RTC_LIB if !MACH_LOONGSON + select RTC_LIB if !MACH_LOONGSON64 select GENERIC_ATOMIC64 if !64BIT select ARCH_HAS_ATOMIC64_DEC_IF_POSITIVE select HAVE_DMA_ATTRS @@ -58,6 +61,8 @@ config MIPS select SYSCTL_EXCEPTION_TRACE select HAVE_VIRT_CPU_ACCOUNTING_GEN select HAVE_IRQ_TIME_ACCOUNTING + select GENERIC_TIME_VSYSCALL + select ARCH_CLOCKSOURCE_DATA menu "Machine selection" @@ -70,7 +75,7 @@ config MIPS_ALCHEMY select ARCH_PHYS_ADDR_T_64BIT select CEVT_R4K select CSRC_R4K - select IRQ_CPU + select IRQ_MIPS_CPU select DMA_MAYBE_COHERENT # Au1000,1500,1100 aren't, rest is select SYS_HAS_CPU_MIPS32_R1 select SYS_SUPPORTS_32BIT_KERNEL @@ -85,7 +90,7 @@ config AR7 select DMA_NONCOHERENT select CEVT_R4K select CSRC_R4K - select IRQ_CPU + select IRQ_MIPS_CPU select NO_EXCEPT_FILL select SWAP_IO_SPACE select SYS_HAS_CPU_MIPS32_R1 @@ -106,7 +111,7 @@ config ATH25 select CEVT_R4K select CSRC_R4K select DMA_NONCOHERENT - select IRQ_CPU + select IRQ_MIPS_CPU select IRQ_DOMAIN select SYS_HAS_CPU_MIPS32_R1 select SYS_SUPPORTS_BIG_ENDIAN @@ -117,20 +122,24 @@ config ATH25 config ATH79 bool "Atheros AR71XX/AR724X/AR913X based boards" + select ARCH_HAS_RESET_CONTROLLER select ARCH_REQUIRE_GPIOLIB select BOOT_RAW select CEVT_R4K select CSRC_R4K select DMA_NONCOHERENT select HAVE_CLK + select COMMON_CLK select CLKDEV_LOOKUP - select IRQ_CPU + select IRQ_MIPS_CPU select MIPS_MACHINE select SYS_HAS_CPU_MIPS32_R2 select SYS_HAS_EARLY_PRINTK select SYS_SUPPORTS_32BIT_KERNEL select SYS_SUPPORTS_BIG_ENDIAN select SYS_SUPPORTS_MIPS16 + select SYS_SUPPORTS_ZBOOT + select USE_OF help Support for the Atheros AR71XX/AR724X/AR913X SoCs. @@ -146,8 +155,7 @@ config BMIPS_GENERIC select BCM7038_L1_IRQ select BCM7120_L2_IRQ select BRCMSTB_L2_IRQ - select IRQ_CPU - select RAW_IRQ_ACCESSORS + select IRQ_MIPS_CPU select DMA_NONCOHERENT select SYS_SUPPORTS_32BIT_KERNEL select SYS_SUPPORTS_LITTLE_ENDIAN @@ -176,7 +184,7 @@ config BCM47XX select CSRC_R4K select DMA_NONCOHERENT select HW_HAS_PCI - select IRQ_CPU + select IRQ_MIPS_CPU select SYS_HAS_CPU_MIPS32_R1 select NO_EXCEPT_FILL select SYS_SUPPORTS_32BIT_KERNEL @@ -186,6 +194,7 @@ config BCM47XX select USE_GENERIC_EARLY_PRINTK_8250 select GPIOLIB select LEDS_GPIO_REGISTER + select BCM47XX_NVRAM help Support for BCM47XX based boards @@ -196,7 +205,7 @@ config BCM63XX select CSRC_R4K select SYNC_R4K select DMA_NONCOHERENT - select IRQ_CPU + select IRQ_MIPS_CPU select SYS_SUPPORTS_32BIT_KERNEL select SYS_SUPPORTS_BIG_ENDIAN select SYS_HAS_EARLY_PRINTK @@ -216,7 +225,7 @@ config MIPS_COBALT select HW_HAS_PCI select I8253 select I8259 - select IRQ_CPU + select IRQ_MIPS_CPU select IRQ_GT641XX select PCI_GT64XXX_PCI0 select PCI @@ -239,7 +248,7 @@ config MACH_DECSTATION select CPU_R4400_WORKAROUNDS if 64BIT select DMA_NONCOHERENT select NO_IOPORT_MAP - select IRQ_CPU + select IRQ_MIPS_CPU select SYS_HAS_CPU_R3000 select SYS_HAS_CPU_R4X00 select SYS_SUPPORTS_32BIT_KERNEL @@ -274,7 +283,7 @@ config MACH_JAZZ select DEFAULT_SGI_PARTITION if CPU_BIG_ENDIAN select GENERIC_ISA_DMA select HAVE_PCSPKR_PLATFORM - select IRQ_CPU + select IRQ_MIPS_CPU select I8253 select I8259 select ISA @@ -288,23 +297,24 @@ config MACH_JAZZ Members include the Acer PICA, MIPS Magnum 4000, MIPS Millennium and Olivetti M700-10 workstations. -config MACH_JZ4740 - bool "Ingenic JZ4740 based machines" - select SYS_HAS_CPU_MIPS32_R1 +config MACH_INGENIC + bool "Ingenic SoC based machines" select SYS_SUPPORTS_32BIT_KERNEL select SYS_SUPPORTS_LITTLE_ENDIAN select SYS_SUPPORTS_ZBOOT_UART16550 select DMA_NONCOHERENT - select IRQ_CPU + select IRQ_MIPS_CPU select ARCH_REQUIRE_GPIOLIB - select SYS_HAS_EARLY_PRINTK - select HAVE_CLK + select COMMON_CLK select GENERIC_IRQ_CHIP + select BUILTIN_DTB + select USE_OF + select LIBFDT config LANTIQ bool "Lantiq based platforms" select DMA_NONCOHERENT - select IRQ_CPU + select IRQ_MIPS_CPU select CEVT_R4K select CSRC_R4K select SYS_HAS_CPU_MIPS32_R1 @@ -333,7 +343,7 @@ config LASAT select DMA_NONCOHERENT select SYS_HAS_EARLY_PRINTK select HW_HAS_PCI - select IRQ_CPU + select IRQ_MIPS_CPU select PCI_GT64XXX_PCI0 select MIPS_NILE4 select R5000_CPU_SCACHE @@ -342,26 +352,28 @@ config LASAT select SYS_SUPPORTS_64BIT_KERNEL if BROKEN select SYS_SUPPORTS_LITTLE_ENDIAN -config MACH_LOONGSON - bool "Loongson family of machines" +config MACH_LOONGSON32 + bool "Loongson-1 family of machines" select SYS_SUPPORTS_ZBOOT help - This enables the support of Loongson family of machines. + This enables support for the Loongson-1 family of machines. - Loongson is a family of general-purpose MIPS-compatible CPUs. - developed at Institute of Computing Technology (ICT), - Chinese Academy of Sciences (CAS) in the People's Republic - of China. The chief architect is Professor Weiwu Hu. + Loongson-1 is a family of 32-bit MIPS-compatible SoCs developed by + the Institute of Computing Technology (ICT), Chinese Academy of + Sciences (CAS). -config MACH_LOONGSON1 - bool "Loongson 1 family of machines" +config MACH_LOONGSON64 + bool "Loongson-2/3 family of machines" select SYS_SUPPORTS_ZBOOT help - This enables support for the Loongson 1 based machines. + This enables the support of Loongson-2/3 family of machines. - Loongson 1 is a family of 32-bit MIPS-compatible SoCs developed by - the ICT (Institute of Computing Technology) and the Chinese Academy - of Sciences. + Loongson-2 is a family of single-core CPUs and Loongson-3 is a + family of multi-core CPUs. They are both 64-bit general-purpose + MIPS-compatible CPUs. Loongson-2/3 are developed by the Institute + of Computing Technology (ICT), Chinese Academy of Sciences (CAS) + in the People's Republic of China. The chief architect is Professor + Weiwu Hu. config MACH_PISTACHIO bool "IMG Pistachio SoC based boards" @@ -373,7 +385,7 @@ config MACH_PISTACHIO select COMMON_CLK select CSRC_R4K select DMA_MAYBE_COHERENT - select IRQ_CPU + select IRQ_MIPS_CPU select LIBFDT select MFD_SYSCON select MIPS_CPU_SCACHE @@ -386,22 +398,48 @@ config MACH_PISTACHIO select SYS_SUPPORTS_MIPS_CPS select SYS_SUPPORTS_MULTITHREADING select SYS_SUPPORTS_ZBOOT + select SYS_HAS_EARLY_PRINTK + select USE_GENERIC_EARLY_PRINTK_8250 select USE_OF help This enables support for the IMG Pistachio SoC platform. +config MACH_XILFPGA + bool "MIPSfpga Xilinx based boards" + select ARCH_REQUIRE_GPIOLIB + select BOOT_ELF32 + select BOOT_RAW + select BUILTIN_DTB + select CEVT_R4K + select COMMON_CLK + select CSRC_R4K + select IRQ_MIPS_CPU + select LIBFDT + select MIPS_CPU_SCACHE + select SYS_HAS_EARLY_PRINTK + select SYS_HAS_CPU_MIPS32_R2 + select SYS_SUPPORTS_32BIT_KERNEL + select SYS_SUPPORTS_LITTLE_ENDIAN + select SYS_SUPPORTS_ZBOOT_UART16550 + select USE_OF + select USE_GENERIC_EARLY_PRINTK_8250 + help + This enables support for the IMG University Program MIPSfpga platform. + config MIPS_MALTA bool "MIPS Malta board" select ARCH_MAY_HAVE_PC_FDC select BOOT_ELF32 select BOOT_RAW + select BUILTIN_DTB select CEVT_R4K select CSRC_R4K select CLKSRC_MIPS_GIC + select COMMON_CLK select DMA_MAYBE_COHERENT select GENERIC_ISA_DMA select HAVE_PCSPKR_PLATFORM - select IRQ_CPU + select IRQ_MIPS_CPU select MIPS_GIC select HW_HAS_PCI select I8253 @@ -411,6 +449,7 @@ config MIPS_MALTA select MIPS_L1_CACHE_SHIFT_6 select PCI_GT64XXX_PCI0 select MIPS_MSC + select SMP_UP if SMP select SWAP_IO_SPACE select SYS_HAS_CPU_MIPS32_R1 select SYS_HAS_CPU_MIPS32_R2 @@ -434,6 +473,10 @@ config MIPS_MALTA select SYS_SUPPORTS_MULTITHREADING select SYS_SUPPORTS_SMARTMIPS select SYS_SUPPORTS_ZBOOT + select USE_OF + select ZONE_DMA32 if 64BIT + select BUILTIN_DTB + select LIBFDT help This enables support for the MIPS Technologies Malta evaluation board. @@ -446,10 +489,11 @@ config MIPS_SEAD3 select CEVT_R4K select CSRC_R4K select CLKSRC_MIPS_GIC + select COMMON_CLK select CPU_MIPSR2_IRQ_VI select CPU_MIPSR2_IRQ_EI select DMA_NONCOHERENT - select IRQ_CPU + select IRQ_MIPS_CPU select MIPS_GIC select LIBFDT select MIPS_MSC @@ -512,7 +556,7 @@ config PMC_MSP select SYS_SUPPORTS_32BIT_KERNEL select SYS_SUPPORTS_BIG_ENDIAN select SYS_SUPPORTS_MIPS16 - select IRQ_CPU + select IRQ_MIPS_CPU select SERIAL_8250 select SERIAL_8250_CONSOLE select USB_EHCI_BIG_ENDIAN_MMIO @@ -529,7 +573,7 @@ config RALINK select CSRC_R4K select BOOT_RAW select DMA_NONCOHERENT - select IRQ_CPU + select IRQ_MIPS_CPU select USE_OF select SYS_HAS_CPU_MIPS32_R1 select SYS_HAS_CPU_MIPS32_R2 @@ -555,7 +599,7 @@ config SGI_IP22 select I8253 select I8259 select IP22_CPU_SCACHE - select IRQ_CPU + select IRQ_MIPS_CPU select GENERIC_ISA_DMA_SUPPORT_BROKEN select SGI_HAS_I8042 select SGI_HAS_INDYDOG @@ -614,7 +658,7 @@ config SGI_IP28 select DEFAULT_SGI_PARTITION select DMA_NONCOHERENT select GENERIC_ISA_DMA_SUPPORT_BROKEN - select IRQ_CPU + select IRQ_MIPS_CPU select HW_HAS_EISA select I8253 select I8259 @@ -650,7 +694,7 @@ config SGI_IP32 select CSRC_R4K select DMA_NONCOHERENT select HW_HAS_PCI - select IRQ_CPU + select IRQ_MIPS_CPU select R5000_CPU_SCACHE select RM7000_CPU_SCACHE select SYS_HAS_CPU_R5000 @@ -766,7 +810,7 @@ config SNI_RM select HAVE_PCSPKR_PLATFORM select HW_HAS_EISA select HW_HAS_PCI - select IRQ_CPU + select IRQ_MIPS_CPU select I8253 select I8259 select ISA @@ -799,7 +843,7 @@ config MIKROTIK_RB532 select CSRC_R4K select DMA_NONCOHERENT select HW_HAS_PCI - select IRQ_CPU + select IRQ_MIPS_CPU select SYS_HAS_CPU_MIPS32_R1 select SYS_SUPPORTS_32BIT_KERNEL select SYS_SUPPORTS_LITTLE_ENDIAN @@ -819,6 +863,7 @@ config CAVIUM_OCTEON_SOC select SYS_SUPPORTS_64BIT_KERNEL select SYS_SUPPORTS_BIG_ENDIAN select EDAC_SUPPORT + select EDAC_ATOMIC_SCRUB select SYS_SUPPORTS_LITTLE_ENDIAN select SYS_SUPPORTS_HOTPLUG_CPU if CPU_BIG_ENDIAN select SYS_HAS_EARLY_PRINTK @@ -865,7 +910,7 @@ config NLM_XLR_BOARD select NR_CPUS_DEFAULT_32 select CEVT_R4K select CSRC_R4K - select IRQ_CPU + select IRQ_MIPS_CPU select ZONE_DMA32 if 64BIT select SYNC_R4K select SYS_HAS_EARLY_PRINTK @@ -885,6 +930,7 @@ config NLM_XLP_BOARD select SYS_SUPPORTS_32BIT_KERNEL select SYS_SUPPORTS_64BIT_KERNEL select ARCH_PHYS_ADDR_T_64BIT + select ARCH_REQUIRE_GPIOLIB select SYS_SUPPORTS_BIG_ENDIAN select SYS_SUPPORTS_LITTLE_ENDIAN select SYS_SUPPORTS_HIGHMEM @@ -892,7 +938,7 @@ config NLM_XLP_BOARD select NR_CPUS_DEFAULT_32 select CEVT_R4K select CSRC_R4K - select IRQ_CPU + select IRQ_MIPS_CPU select ZONE_DMA32 if 64BIT select SYNC_R4K select SYS_HAS_EARLY_PRINTK @@ -934,6 +980,7 @@ source "arch/mips/jazz/Kconfig" source "arch/mips/jz4740/Kconfig" source "arch/mips/lantiq/Kconfig" source "arch/mips/lasat/Kconfig" +source "arch/mips/pistachio/Kconfig" source "arch/mips/pmcs-msp71xx/Kconfig" source "arch/mips/ralink/Kconfig" source "arch/mips/sgi-ip27/Kconfig" @@ -941,10 +988,11 @@ source "arch/mips/sibyte/Kconfig" source "arch/mips/txx9/Kconfig" source "arch/mips/vr41xx/Kconfig" source "arch/mips/cavium-octeon/Kconfig" -source "arch/mips/loongson/Kconfig" -source "arch/mips/loongson1/Kconfig" +source "arch/mips/loongson32/Kconfig" +source "arch/mips/loongson64/Kconfig" source "arch/mips/netlogic/Kconfig" source "arch/mips/paravirt/Kconfig" +source "arch/mips/xilfpga/Kconfig" endmenu @@ -1017,6 +1065,9 @@ config CSRC_R4K config CSRC_SB1250 bool +config MIPS_CLOCK_VSYSCALL + def_bool CSRC_R4K || CLKSRC_MIPS_GIC + config GPIO_TXX9 select ARCH_REQUIRE_GPIOLIB bool @@ -1027,6 +1078,9 @@ config FW_CFE config ARCH_DMA_ADDR_T_64BIT def_bool (HIGHMEM && ARCH_PHYS_ADDR_T_64BIT) || 64BIT +config ARCH_SUPPORTS_UPROBES + bool + config DMA_MAYBE_COHERENT select DMA_NONCOHERENT bool @@ -1057,10 +1111,6 @@ config HOTPLUG_CPU config SYS_SUPPORTS_HOTPLUG_CPU bool -config I8259 - bool - select IRQ_DOMAIN - config MIPS_BONITO64 bool @@ -1141,10 +1191,6 @@ config SYS_SUPPORTS_HUGETLBFS config MIPS_HUGE_TLB_SUPPORT def_bool HUGETLB_PAGE || TRANSPARENT_HUGEPAGE -config IRQ_CPU - bool - select IRQ_DOMAIN - config IRQ_CPU_RM7K bool @@ -1171,7 +1217,7 @@ config SOC_EMMA2RH select CEVT_R4K select CSRC_R4K select DMA_NONCOHERENT - select IRQ_CPU + select IRQ_MIPS_CPU select SWAP_IO_SPACE select SYS_HAS_CPU_R5500 select SYS_SUPPORTS_32BIT_KERNEL @@ -1182,7 +1228,7 @@ config SOC_PNX833X bool select CEVT_R4K select CSRC_R4K - select IRQ_CPU + select IRQ_MIPS_CPU select DMA_NONCOHERENT select SYS_HAS_CPU_MIPS32_R2 select SYS_SUPPORTS_32BIT_KERNEL @@ -1358,7 +1404,7 @@ config CPU_MIPS32_R2 otherwise CPU_MIPS32_R1 is a safe bet for any MIPS32 system. config CPU_MIPS32_R6 - bool "MIPS32 Release 6 (EXPERIMENTAL)" + bool "MIPS32 Release 6" depends on SYS_HAS_CPU_MIPS32_R6 select CPU_HAS_PREFETCH select CPU_SUPPORTS_32BIT_KERNEL @@ -1409,7 +1455,7 @@ config CPU_MIPS64_R2 otherwise CPU_MIPS64_R1 is a safe bet for any MIPS64 system. config CPU_MIPS64_R6 - bool "MIPS64 Release 6 (EXPERIMENTAL)" + bool "MIPS64 Release 6" depends on SYS_HAS_CPU_MIPS64_R6 select CPU_HAS_PREFETCH select CPU_SUPPORTS_32BIT_KERNEL @@ -1569,7 +1615,8 @@ config CPU_CAVIUM_OCTEON select WEAK_ORDERING select CPU_SUPPORTS_HIGHMEM select CPU_SUPPORTS_HUGEPAGES - select USB_EHCI_BIG_ENDIAN_MMIO + select USB_EHCI_BIG_ENDIAN_MMIO if CPU_BIG_ENDIAN + select USB_OHCI_BIG_ENDIAN_MMIO if CPU_BIG_ENDIAN select MIPS_L1_CACHE_SHIFT_7 help The Cavium Octeon processor is a highly integrated chip containing @@ -1587,7 +1634,7 @@ config CPU_BMIPS select CPU_BMIPS5000 if SYS_HAS_CPU_BMIPS5000 select CPU_SUPPORTS_32BIT_KERNEL select DMA_NONCOHERENT - select IRQ_CPU + select IRQ_MIPS_CPU select SWAP_IO_SPACE select WEAK_ORDERING select CPU_SUPPORTS_HIGHMEM @@ -1958,6 +2005,7 @@ config 32BIT select TRAD_SIGNALS help Select this option if you want to build a 32-bit kernel. + config 64BIT bool "64-bit kernel" depends on CPU_SUPPORTS_64BIT_KERNEL && SYS_SUPPORTS_64BIT_KERNEL @@ -2103,11 +2151,11 @@ config CPU_R4K_CACHE_TLB config MIPS_MT_SMP bool "MIPS MT SMP support (1 TC on each available VPE)" - depends on SYS_SUPPORTS_MULTITHREADING + depends on SYS_SUPPORTS_MULTITHREADING && !CPU_MIPSR6 select CPU_MIPSR2_IRQ_VI select CPU_MIPSR2_IRQ_EI select SYNC_R4K - select MIPS_GIC_IPI + select MIPS_GIC_IPI if MIPS_GIC select MIPS_MT select SMP select SMP_UP @@ -2204,8 +2252,8 @@ config MIPS_VPE_APSP_API_MT config MIPS_CMP bool "MIPS CMP framework support (DEPRECATED)" - depends on SYS_SUPPORTS_MIPS_CMP - select MIPS_GIC_IPI + depends on SYS_SUPPORTS_MIPS_CMP && !CPU_MIPSR6 + select MIPS_GIC_IPI if MIPS_GIC select SMP select SYNC_R4K select SYS_SUPPORTS_SMP @@ -2221,11 +2269,11 @@ config MIPS_CMP config MIPS_CPS bool "MIPS Coherent Processing System support" - depends on SYS_SUPPORTS_MIPS_CPS && !64BIT + depends on SYS_SUPPORTS_MIPS_CPS && !CPU_MIPSR6 select MIPS_CM select MIPS_CPC select MIPS_CPS_PM if HOTPLUG_CPU - select MIPS_GIC_IPI + select MIPS_GIC_IPI if MIPS_GIC select SMP select SYNC_R4K if (CEVT_R4K || CSRC_R4K) select SYS_SUPPORTS_HOTPLUG_CPU @@ -2244,6 +2292,7 @@ config MIPS_CPS_PM bool config MIPS_GIC_IPI + depends on MIPS_GIC bool config MIPS_CM @@ -2252,11 +2301,6 @@ config MIPS_CM config MIPS_CPC bool -config SB1_PASS_1_WORKAROUNDS - bool - depends on CPU_SB1_PASS_1 - default y - config SB1_PASS_2_WORKAROUNDS bool depends on CPU_SB1 && (CPU_SB1_PASS_2_2 || CPU_SB1_PASS_2) @@ -2301,7 +2345,7 @@ config CPU_MICROMIPS endchoice config CPU_HAS_MSA - bool "Support for the MIPS SIMD Architecture (EXPERIMENTAL)" + bool "Support for the MIPS SIMD Architecture" depends on CPU_SUPPORTS_MSA depends on 64BIT || MIPS_O32_FP64_SUPPORT help @@ -2518,6 +2562,9 @@ choice help Allows the configuration of the timer frequency. + config HZ_24 + bool "24 HZ" if SYS_SUPPORTS_24HZ || SYS_SUPPORTS_ARBIT_HZ + config HZ_48 bool "48 HZ" if SYS_SUPPORTS_48HZ || SYS_SUPPORTS_ARBIT_HZ @@ -2541,6 +2588,9 @@ choice endchoice +config SYS_SUPPORTS_24HZ + bool + config SYS_SUPPORTS_48HZ bool @@ -2564,13 +2614,18 @@ config SYS_SUPPORTS_1024HZ config SYS_SUPPORTS_ARBIT_HZ bool - default y if !SYS_SUPPORTS_48HZ && !SYS_SUPPORTS_100HZ && \ - !SYS_SUPPORTS_128HZ && !SYS_SUPPORTS_250HZ && \ - !SYS_SUPPORTS_256HZ && !SYS_SUPPORTS_1000HZ && \ + default y if !SYS_SUPPORTS_24HZ && \ + !SYS_SUPPORTS_48HZ && \ + !SYS_SUPPORTS_100HZ && \ + !SYS_SUPPORTS_128HZ && \ + !SYS_SUPPORTS_250HZ && \ + !SYS_SUPPORTS_256HZ && \ + !SYS_SUPPORTS_1000HZ && \ !SYS_SUPPORTS_1024HZ config HZ int + default 24 if HZ_24 default 48 if HZ_48 default 100 if HZ_100 default 128 if HZ_128 @@ -2586,6 +2641,7 @@ source "kernel/Kconfig.preempt" config KEXEC bool "Kexec system call" + select KEXEC_CORE help kexec is a system call that implements the ability to shutdown your current kernel, and to start another kernel. It is like a reboot @@ -2641,7 +2697,7 @@ config SECCOMP If unsure, say Y. Only embedded should say N here. config MIPS_O32_FP64_SUPPORT - bool "Support for O32 binaries using 64-bit FP (EXPERIMENTAL)" + bool "Support for O32 binaries using 64-bit FP" depends on 32BIT || MIPS32_O32 help When this is enabled, the kernel will support use of 64-bit floating @@ -2672,6 +2728,84 @@ config USE_OF config BUILTIN_DTB bool +choice + prompt "Kernel appended dtb support" if USE_OF + default MIPS_NO_APPENDED_DTB + + config MIPS_NO_APPENDED_DTB + bool "None" + help + Do not enable appended dtb support. + + config MIPS_ELF_APPENDED_DTB + bool "vmlinux" + help + With this option, the boot code will look for a device tree binary + DTB) included in the vmlinux ELF section .appended_dtb. By default + it is empty and the DTB can be appended using binutils command + objcopy: + + objcopy --update-section .appended_dtb=<filename>.dtb vmlinux + + This is meant as a backward compatiblity convenience for those + systems with a bootloader that can't be upgraded to accommodate + the documented boot protocol using a device tree. + + config MIPS_RAW_APPENDED_DTB + bool "vmlinux.bin" + help + With this option, the boot code will look for a device tree binary + DTB) appended to raw vmlinux.bin (without decompressor). + (e.g. cat vmlinux.bin <filename>.dtb > vmlinux_w_dtb). + + This is meant as a backward compatibility convenience for those + systems with a bootloader that can't be upgraded to accommodate + the documented boot protocol using a device tree. + + Beware that there is very little in terms of protection against + this option being confused by leftover garbage in memory that might + look like a DTB header after a reboot if no actual DTB is appended + to vmlinux.bin. Do not leave this option active in a production kernel + if you don't intend to always append a DTB. + + config MIPS_ZBOOT_APPENDED_DTB + bool "vmlinuz.bin" + depends on SYS_SUPPORTS_ZBOOT + help + With this option, the boot code will look for a device tree binary + DTB) appended to raw vmlinuz.bin (with decompressor). + (e.g. cat vmlinuz.bin <filename>.dtb > vmlinuz_w_dtb). + + This is meant as a backward compatibility convenience for those + systems with a bootloader that can't be upgraded to accommodate + the documented boot protocol using a device tree. + + Beware that there is very little in terms of protection against + this option being confused by leftover garbage in memory that might + look like a DTB header after a reboot if no actual DTB is appended + to vmlinuz.bin. Do not leave this option active in a production kernel + if you don't intend to always append a DTB. +endchoice + +choice + prompt "Kernel command line type" if !CMDLINE_OVERRIDE + default MIPS_CMDLINE_FROM_DTB if USE_OF && !ATH79 && !MACH_INGENIC && \ + !MIPS_MALTA && !MIPS_SEAD3 && \ + !CAVIUM_OCTEON_SOC + default MIPS_CMDLINE_FROM_BOOTLOADER + + config MIPS_CMDLINE_FROM_DTB + depends on USE_OF + bool "Dtb kernel arguments if available" + + config MIPS_CMDLINE_DTB_EXTEND + depends on USE_OF + bool "Extend dtb kernel arguments with bootloader arguments" + + config MIPS_CMDLINE_FROM_BOOTLOADER + bool "Bootloader kernel arguments if available" +endchoice + endmenu config LOCKDEP_SUPPORT @@ -2682,6 +2816,10 @@ config STACKTRACE_SUPPORT bool default y +config HAVE_LATENCYTOP_SUPPORT + bool + default y + config PGTABLE_LEVELS int default 3 if 64BIT && !PAGE_SIZE_64KB |