summaryrefslogtreecommitdiffstats
path: root/kernel/arch/m68k/atari
diff options
context:
space:
mode:
Diffstat (limited to 'kernel/arch/m68k/atari')
-rw-r--r--kernel/arch/m68k/atari/Makefile8
-rw-r--r--kernel/arch/m68k/atari/ataints.c391
-rw-r--r--kernel/arch/m68k/atari/atakeyb.c570
-rw-r--r--kernel/arch/m68k/atari/atasound.c110
-rw-r--r--kernel/arch/m68k/atari/config.c925
-rw-r--r--kernel/arch/m68k/atari/debug.c329
-rw-r--r--kernel/arch/m68k/atari/stdma.c220
-rw-r--r--kernel/arch/m68k/atari/stram.c198
-rw-r--r--kernel/arch/m68k/atari/time.c356
9 files changed, 3107 insertions, 0 deletions
diff --git a/kernel/arch/m68k/atari/Makefile b/kernel/arch/m68k/atari/Makefile
new file mode 100644
index 000000000..0cac72330
--- /dev/null
+++ b/kernel/arch/m68k/atari/Makefile
@@ -0,0 +1,8 @@
+#
+# Makefile for Linux arch/m68k/atari source directory
+#
+
+obj-y := config.o time.o debug.o ataints.o stdma.o \
+ atasound.o stram.o
+
+obj-$(CONFIG_ATARI_KBD_CORE) += atakeyb.o
diff --git a/kernel/arch/m68k/atari/ataints.c b/kernel/arch/m68k/atari/ataints.c
new file mode 100644
index 000000000..3d2b63bed
--- /dev/null
+++ b/kernel/arch/m68k/atari/ataints.c
@@ -0,0 +1,391 @@
+/*
+ * arch/m68k/atari/ataints.c -- Atari Linux interrupt handling code
+ *
+ * 5/2/94 Roman Hodek:
+ * Added support for TT interrupts; setup for TT SCU (may someone has
+ * twiddled there and we won't get the right interrupts :-()
+ *
+ * Major change: The device-independent code in m68k/ints.c didn't know
+ * about non-autovec ints yet. It hardcoded the number of possible ints to
+ * 7 (IRQ1...IRQ7). But the Atari has lots of non-autovec ints! I made the
+ * number of possible ints a constant defined in interrupt.h, which is
+ * 47 for the Atari. So we can call request_irq() for all Atari interrupts
+ * just the normal way. Additionally, all vectors >= 48 are initialized to
+ * call trap() instead of inthandler(). This must be changed here, too.
+ *
+ * 1995-07-16 Lars Brinkhoff <f93labr@dd.chalmers.se>:
+ * Corrected a bug in atari_add_isr() which rejected all SCC
+ * interrupt sources if there were no TT MFP!
+ *
+ * 12/13/95: New interface functions atari_level_triggered_int() and
+ * atari_register_vme_int() as support for level triggered VME interrupts.
+ *
+ * 02/12/96: (Roman)
+ * Total rewrite of Atari interrupt handling, for new scheme see comments
+ * below.
+ *
+ * 1996-09-03 lars brinkhoff <f93labr@dd.chalmers.se>:
+ * Added new function atari_unregister_vme_int(), and
+ * modified atari_register_vme_int() as well as IS_VALID_INTNO()
+ * to work with it.
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file COPYING in the main directory of this archive
+ * for more details.
+ *
+ */
+
+#include <linux/types.h>
+#include <linux/kernel.h>
+#include <linux/kernel_stat.h>
+#include <linux/init.h>
+#include <linux/seq_file.h>
+#include <linux/module.h>
+#include <linux/irq.h>
+
+#include <asm/traps.h>
+
+#include <asm/atarihw.h>
+#include <asm/atariints.h>
+#include <asm/atari_stdma.h>
+#include <asm/irq.h>
+#include <asm/entry.h>
+#include <asm/io.h>
+
+
+/*
+ * Atari interrupt handling scheme:
+ * --------------------------------
+ *
+ * All interrupt source have an internal number (defined in
+ * <asm/atariints.h>): Autovector interrupts are 1..7, then follow ST-MFP,
+ * TT-MFP, SCC, and finally VME interrupts. Vector numbers for the latter can
+ * be allocated by atari_register_vme_int().
+ */
+
+/*
+ * Bitmap for free interrupt vector numbers
+ * (new vectors starting from 0x70 can be allocated by
+ * atari_register_vme_int())
+ */
+static int free_vme_vec_bitmap;
+
+/* GK:
+ * HBL IRQ handler for Falcon. Nobody needs it :-)
+ * ++andreas: raise ipl to disable further HBLANK interrupts.
+ */
+asmlinkage void falcon_hblhandler(void);
+asm(".text\n"
+__ALIGN_STR "\n\t"
+"falcon_hblhandler:\n\t"
+ "orw #0x200,%sp@\n\t" /* set saved ipl to 2 */
+ "rte");
+
+extern void atari_microwire_cmd(int cmd);
+
+static unsigned int atari_irq_startup(struct irq_data *data)
+{
+ unsigned int irq = data->irq;
+
+ m68k_irq_startup(data);
+ atari_turnon_irq(irq);
+ atari_enable_irq(irq);
+ return 0;
+}
+
+static void atari_irq_shutdown(struct irq_data *data)
+{
+ unsigned int irq = data->irq;
+
+ atari_disable_irq(irq);
+ atari_turnoff_irq(irq);
+ m68k_irq_shutdown(data);
+
+ if (irq == IRQ_AUTO_4)
+ vectors[VEC_INT4] = falcon_hblhandler;
+}
+
+static void atari_irq_enable(struct irq_data *data)
+{
+ atari_enable_irq(data->irq);
+}
+
+static void atari_irq_disable(struct irq_data *data)
+{
+ atari_disable_irq(data->irq);
+}
+
+static struct irq_chip atari_irq_chip = {
+ .name = "atari",
+ .irq_startup = atari_irq_startup,
+ .irq_shutdown = atari_irq_shutdown,
+ .irq_enable = atari_irq_enable,
+ .irq_disable = atari_irq_disable,
+};
+
+/*
+ * ST-MFP timer D chained interrupts - each driver gets its own timer
+ * interrupt instance.
+ */
+
+struct mfptimerbase {
+ volatile struct MFP *mfp;
+ unsigned char mfp_mask, mfp_data;
+ unsigned short int_mask;
+ int handler_irq, mfptimer_irq, server_irq;
+ char *name;
+} stmfp_base = {
+ .mfp = &st_mfp,
+ .int_mask = 0x0,
+ .handler_irq = IRQ_MFP_TIMD,
+ .mfptimer_irq = IRQ_MFP_TIMER1,
+ .name = "MFP Timer D"
+};
+
+static irqreturn_t mfptimer_handler(int irq, void *dev_id)
+{
+ struct mfptimerbase *base = dev_id;
+ int mach_irq;
+ unsigned char ints;
+
+ mach_irq = base->mfptimer_irq;
+ ints = base->int_mask;
+ for (; ints; mach_irq++, ints >>= 1) {
+ if (ints & 1)
+ generic_handle_irq(mach_irq);
+ }
+ return IRQ_HANDLED;
+}
+
+
+static void atari_mfptimer_enable(struct irq_data *data)
+{
+ int mfp_num = data->irq - IRQ_MFP_TIMER1;
+ stmfp_base.int_mask |= 1 << mfp_num;
+ atari_enable_irq(IRQ_MFP_TIMD);
+}
+
+static void atari_mfptimer_disable(struct irq_data *data)
+{
+ int mfp_num = data->irq - IRQ_MFP_TIMER1;
+ stmfp_base.int_mask &= ~(1 << mfp_num);
+ if (!stmfp_base.int_mask)
+ atari_disable_irq(IRQ_MFP_TIMD);
+}
+
+static struct irq_chip atari_mfptimer_chip = {
+ .name = "timer_d",
+ .irq_enable = atari_mfptimer_enable,
+ .irq_disable = atari_mfptimer_disable,
+};
+
+
+/*
+ * EtherNAT CPLD interrupt handling
+ * CPLD interrupt register is at phys. 0x80000023
+ * Need this mapped in at interrupt startup time
+ * Possibly need this mapped on demand anyway -
+ * EtherNAT USB driver needs to disable IRQ before
+ * startup!
+ */
+
+static unsigned char *enat_cpld;
+
+static unsigned int atari_ethernat_startup(struct irq_data *data)
+{
+ int enat_num = 140 - data->irq + 1;
+
+ m68k_irq_startup(data);
+ /*
+ * map CPLD interrupt register
+ */
+ if (!enat_cpld)
+ enat_cpld = (unsigned char *)ioremap((ATARI_ETHERNAT_PHYS_ADDR+0x23), 0x2);
+ /*
+ * do _not_ enable the USB chip interrupt here - causes interrupt storm
+ * and triggers dead interrupt watchdog
+ * Need to reset the USB chip to a sane state in early startup before
+ * removing this hack
+ */
+ if (enat_num == 1)
+ *enat_cpld |= 1 << enat_num;
+
+ return 0;
+}
+
+static void atari_ethernat_enable(struct irq_data *data)
+{
+ int enat_num = 140 - data->irq + 1;
+ /*
+ * map CPLD interrupt register
+ */
+ if (!enat_cpld)
+ enat_cpld = (unsigned char *)ioremap((ATARI_ETHERNAT_PHYS_ADDR+0x23), 0x2);
+ *enat_cpld |= 1 << enat_num;
+}
+
+static void atari_ethernat_disable(struct irq_data *data)
+{
+ int enat_num = 140 - data->irq + 1;
+ /*
+ * map CPLD interrupt register
+ */
+ if (!enat_cpld)
+ enat_cpld = (unsigned char *)ioremap((ATARI_ETHERNAT_PHYS_ADDR+0x23), 0x2);
+ *enat_cpld &= ~(1 << enat_num);
+}
+
+static void atari_ethernat_shutdown(struct irq_data *data)
+{
+ int enat_num = 140 - data->irq + 1;
+ if (enat_cpld) {
+ *enat_cpld &= ~(1 << enat_num);
+ iounmap(enat_cpld);
+ enat_cpld = NULL;
+ }
+}
+
+static struct irq_chip atari_ethernat_chip = {
+ .name = "ethernat",
+ .irq_startup = atari_ethernat_startup,
+ .irq_shutdown = atari_ethernat_shutdown,
+ .irq_enable = atari_ethernat_enable,
+ .irq_disable = atari_ethernat_disable,
+};
+
+/*
+ * void atari_init_IRQ (void)
+ *
+ * Parameters: None
+ *
+ * Returns: Nothing
+ *
+ * This function should be called during kernel startup to initialize
+ * the atari IRQ handling routines.
+ */
+
+void __init atari_init_IRQ(void)
+{
+ m68k_setup_user_interrupt(VEC_USER, NUM_ATARI_SOURCES - IRQ_USER);
+ m68k_setup_irq_controller(&atari_irq_chip, handle_simple_irq, 1,
+ NUM_ATARI_SOURCES - 1);
+
+ /* Initialize the MFP(s) */
+
+#ifdef ATARI_USE_SOFTWARE_EOI
+ st_mfp.vec_adr = 0x48; /* Software EOI-Mode */
+#else
+ st_mfp.vec_adr = 0x40; /* Automatic EOI-Mode */
+#endif
+ st_mfp.int_en_a = 0x00; /* turn off MFP-Ints */
+ st_mfp.int_en_b = 0x00;
+ st_mfp.int_mk_a = 0xff; /* no Masking */
+ st_mfp.int_mk_b = 0xff;
+
+ if (ATARIHW_PRESENT(TT_MFP)) {
+#ifdef ATARI_USE_SOFTWARE_EOI
+ tt_mfp.vec_adr = 0x58; /* Software EOI-Mode */
+#else
+ tt_mfp.vec_adr = 0x50; /* Automatic EOI-Mode */
+#endif
+ tt_mfp.int_en_a = 0x00; /* turn off MFP-Ints */
+ tt_mfp.int_en_b = 0x00;
+ tt_mfp.int_mk_a = 0xff; /* no Masking */
+ tt_mfp.int_mk_b = 0xff;
+ }
+
+ if (ATARIHW_PRESENT(SCC) && !atari_SCC_reset_done) {
+ atari_scc.cha_a_ctrl = 9;
+ MFPDELAY();
+ atari_scc.cha_a_ctrl = (char) 0xc0; /* hardware reset */
+ }
+
+ if (ATARIHW_PRESENT(SCU)) {
+ /* init the SCU if present */
+ tt_scu.sys_mask = 0x10; /* enable VBL (for the cursor) and
+ * disable HSYNC interrupts (who
+ * needs them?) MFP and SCC are
+ * enabled in VME mask
+ */
+ tt_scu.vme_mask = 0x60; /* enable MFP and SCC ints */
+ } else {
+ /* If no SCU and no Hades, the HSYNC interrupt needs to be
+ * disabled this way. (Else _inthandler in kernel/sys_call.S
+ * gets overruns)
+ */
+
+ vectors[VEC_INT2] = falcon_hblhandler;
+ vectors[VEC_INT4] = falcon_hblhandler;
+ }
+
+ if (ATARIHW_PRESENT(PCM_8BIT) && ATARIHW_PRESENT(MICROWIRE)) {
+ /* Initialize the LM1992 Sound Controller to enable
+ the PSG sound. This is misplaced here, it should
+ be in an atasound_init(), that doesn't exist yet. */
+ atari_microwire_cmd(MW_LM1992_PSG_HIGH);
+ }
+
+ stdma_init();
+
+ /* Initialize the PSG: all sounds off, both ports output */
+ sound_ym.rd_data_reg_sel = 7;
+ sound_ym.wd_data = 0xff;
+
+ m68k_setup_irq_controller(&atari_mfptimer_chip, handle_simple_irq,
+ IRQ_MFP_TIMER1, 8);
+
+ irq_set_status_flags(IRQ_MFP_TIMER1, IRQ_IS_POLLED);
+ irq_set_status_flags(IRQ_MFP_TIMER2, IRQ_IS_POLLED);
+
+ /* prepare timer D data for use as poll interrupt */
+ /* set Timer D data Register - needs to be > 0 */
+ st_mfp.tim_dt_d = 254; /* < 100 Hz */
+ /* start timer D, div = 1:100 */
+ st_mfp.tim_ct_cd = (st_mfp.tim_ct_cd & 0xf0) | 0x6;
+
+ /* request timer D dispatch handler */
+ if (request_irq(IRQ_MFP_TIMD, mfptimer_handler, IRQF_SHARED,
+ stmfp_base.name, &stmfp_base))
+ pr_err("Couldn't register %s interrupt\n", stmfp_base.name);
+
+ /*
+ * EtherNAT ethernet / USB interrupt handlers
+ */
+
+ m68k_setup_irq_controller(&atari_ethernat_chip, handle_simple_irq,
+ 139, 2);
+}
+
+
+/*
+ * atari_register_vme_int() returns the number of a free interrupt vector for
+ * hardware with a programmable int vector (probably a VME board).
+ */
+
+unsigned int atari_register_vme_int(void)
+{
+ int i;
+
+ for (i = 0; i < 32; i++)
+ if ((free_vme_vec_bitmap & (1 << i)) == 0)
+ break;
+
+ if (i == 16)
+ return 0;
+
+ free_vme_vec_bitmap |= 1 << i;
+ return VME_SOURCE_BASE + i;
+}
+EXPORT_SYMBOL(atari_register_vme_int);
+
+
+void atari_unregister_vme_int(unsigned int irq)
+{
+ if (irq >= VME_SOURCE_BASE && irq < VME_SOURCE_BASE + VME_MAX_SOURCES) {
+ irq -= VME_SOURCE_BASE;
+ free_vme_vec_bitmap &= ~(1 << irq);
+ }
+}
+EXPORT_SYMBOL(atari_unregister_vme_int);
+
+
diff --git a/kernel/arch/m68k/atari/atakeyb.c b/kernel/arch/m68k/atari/atakeyb.c
new file mode 100644
index 000000000..264db1126
--- /dev/null
+++ b/kernel/arch/m68k/atari/atakeyb.c
@@ -0,0 +1,570 @@
+/*
+ * Atari Keyboard driver for 680x0 Linux
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file COPYING in the main directory of this archive
+ * for more details.
+ */
+
+/*
+ * Atari support by Robert de Vries
+ * enhanced by Bjoern Brauel and Roman Hodek
+ *
+ * 2.6 and input cleanup (removed autorepeat stuff) for 2.6.21
+ * 06/07 Michael Schmitz
+ */
+
+#include <linux/module.h>
+#include <linux/sched.h>
+#include <linux/kernel.h>
+#include <linux/interrupt.h>
+#include <linux/errno.h>
+#include <linux/keyboard.h>
+#include <linux/delay.h>
+#include <linux/timer.h>
+#include <linux/kd.h>
+#include <linux/random.h>
+#include <linux/init.h>
+#include <linux/kbd_kern.h>
+
+#include <asm/atariints.h>
+#include <asm/atarihw.h>
+#include <asm/atarikb.h>
+#include <asm/atari_joystick.h>
+#include <asm/irq.h>
+
+
+/* Hook for MIDI serial driver */
+void (*atari_MIDI_interrupt_hook) (void);
+/* Hook for keyboard inputdev driver */
+void (*atari_input_keyboard_interrupt_hook) (unsigned char, char);
+/* Hook for mouse inputdev driver */
+void (*atari_input_mouse_interrupt_hook) (char *);
+EXPORT_SYMBOL(atari_input_keyboard_interrupt_hook);
+EXPORT_SYMBOL(atari_input_mouse_interrupt_hook);
+
+/* variables for IKBD self test: */
+
+/* state: 0: off; >0: in progress; >1: 0xf1 received */
+static volatile int ikbd_self_test;
+/* timestamp when last received a char */
+static volatile unsigned long self_test_last_rcv;
+/* bitmap of keys reported as broken */
+static unsigned long broken_keys[128/(sizeof(unsigned long)*8)] = { 0, };
+
+#define BREAK_MASK (0x80)
+
+/*
+ * ++roman: The following changes were applied manually:
+ *
+ * - The Alt (= Meta) key works in combination with Shift and
+ * Control, e.g. Alt+Shift+a sends Meta-A (0xc1), Alt+Control+A sends
+ * Meta-Ctrl-A (0x81) ...
+ *
+ * - The parentheses on the keypad send '(' and ')' with all
+ * modifiers (as would do e.g. keypad '+'), but they cannot be used as
+ * application keys (i.e. sending Esc O c).
+ *
+ * - HELP and UNDO are mapped to be F21 and F24, resp, that send the
+ * codes "\E[M" and "\E[P". (This is better than the old mapping to
+ * F11 and F12, because these codes are on Shift+F1/2 anyway.) This
+ * way, applications that allow their own keyboard mappings
+ * (e.g. tcsh, X Windows) can be configured to use them in the way
+ * the label suggests (providing help or undoing).
+ *
+ * - Console switching is done with Alt+Fx (consoles 1..10) and
+ * Shift+Alt+Fx (consoles 11..20).
+ *
+ * - The misc. special function implemented in the kernel are mapped
+ * to the following key combinations:
+ *
+ * ClrHome -> Home/Find
+ * Shift + ClrHome -> End/Select
+ * Shift + Up -> Page Up
+ * Shift + Down -> Page Down
+ * Alt + Help -> show system status
+ * Shift + Help -> show memory info
+ * Ctrl + Help -> show registers
+ * Ctrl + Alt + Del -> Reboot
+ * Alt + Undo -> switch to last console
+ * Shift + Undo -> send interrupt
+ * Alt + Insert -> stop/start output (same as ^S/^Q)
+ * Alt + Up -> Scroll back console (if implemented)
+ * Alt + Down -> Scroll forward console (if implemented)
+ * Alt + CapsLock -> NumLock
+ *
+ * ++Andreas:
+ *
+ * - Help mapped to K_HELP
+ * - Undo mapped to K_UNDO (= K_F246)
+ * - Keypad Left/Right Parenthesis mapped to new K_PPAREN[LR]
+ */
+
+typedef enum kb_state_t {
+ KEYBOARD, AMOUSE, RMOUSE, JOYSTICK, CLOCK, RESYNC
+} KB_STATE_T;
+
+#define IS_SYNC_CODE(sc) ((sc) >= 0x04 && (sc) <= 0xfb)
+
+typedef struct keyboard_state {
+ unsigned char buf[6];
+ int len;
+ KB_STATE_T state;
+} KEYBOARD_STATE;
+
+KEYBOARD_STATE kb_state;
+
+/* ++roman: If a keyboard overrun happened, we can't tell in general how much
+ * bytes have been lost and in which state of the packet structure we are now.
+ * This usually causes keyboards bytes to be interpreted as mouse movements
+ * and vice versa, which is very annoying. It seems better to throw away some
+ * bytes (that are usually mouse bytes) than to misinterpret them. Therefore I
+ * introduced the RESYNC state for IKBD data. In this state, the bytes up to
+ * one that really looks like a key event (0x04..0xf2) or the start of a mouse
+ * packet (0xf8..0xfb) are thrown away, but at most 2 bytes. This at least
+ * speeds up the resynchronization of the event structure, even if maybe a
+ * mouse movement is lost. However, nothing is perfect. For bytes 0x01..0x03,
+ * it's really hard to decide whether they're mouse or keyboard bytes. Since
+ * overruns usually occur when moving the Atari mouse rapidly, they're seen as
+ * mouse bytes here. If this is wrong, only a make code of the keyboard gets
+ * lost, which isn't too bad. Losing a break code would be disastrous,
+ * because then the keyboard repeat strikes...
+ */
+
+static irqreturn_t atari_keyboard_interrupt(int irq, void *dummy)
+{
+ u_char acia_stat;
+ int scancode;
+ int break_flag;
+
+repeat:
+ if (acia.mid_ctrl & ACIA_IRQ)
+ if (atari_MIDI_interrupt_hook)
+ atari_MIDI_interrupt_hook();
+ acia_stat = acia.key_ctrl;
+ /* check out if the interrupt came from this ACIA */
+ if (!((acia_stat | acia.mid_ctrl) & ACIA_IRQ))
+ return IRQ_HANDLED;
+
+ if (acia_stat & ACIA_OVRN) {
+ /* a very fast typist or a slow system, give a warning */
+ /* ...happens often if interrupts were disabled for too long */
+ printk(KERN_DEBUG "Keyboard overrun\n");
+ scancode = acia.key_data;
+ if (ikbd_self_test)
+ /* During self test, don't do resyncing, just process the code */
+ goto interpret_scancode;
+ else if (IS_SYNC_CODE(scancode)) {
+ /* This code seem already to be the start of a new packet or a
+ * single scancode */
+ kb_state.state = KEYBOARD;
+ goto interpret_scancode;
+ } else {
+ /* Go to RESYNC state and skip this byte */
+ kb_state.state = RESYNC;
+ kb_state.len = 1; /* skip max. 1 another byte */
+ goto repeat;
+ }
+ }
+
+ if (acia_stat & ACIA_RDRF) {
+ /* received a character */
+ scancode = acia.key_data; /* get it or reset the ACIA, I'll get it! */
+ interpret_scancode:
+ switch (kb_state.state) {
+ case KEYBOARD:
+ switch (scancode) {
+ case 0xF7:
+ kb_state.state = AMOUSE;
+ kb_state.len = 0;
+ break;
+
+ case 0xF8:
+ case 0xF9:
+ case 0xFA:
+ case 0xFB:
+ kb_state.state = RMOUSE;
+ kb_state.len = 1;
+ kb_state.buf[0] = scancode;
+ break;
+
+ case 0xFC:
+ kb_state.state = CLOCK;
+ kb_state.len = 0;
+ break;
+
+ case 0xFE:
+ case 0xFF:
+ kb_state.state = JOYSTICK;
+ kb_state.len = 1;
+ kb_state.buf[0] = scancode;
+ break;
+
+ case 0xF1:
+ /* during self-test, note that 0xf1 received */
+ if (ikbd_self_test) {
+ ++ikbd_self_test;
+ self_test_last_rcv = jiffies;
+ break;
+ }
+ /* FALL THROUGH */
+
+ default:
+ break_flag = scancode & BREAK_MASK;
+ scancode &= ~BREAK_MASK;
+ if (ikbd_self_test) {
+ /* Scancodes sent during the self-test stand for broken
+ * keys (keys being down). The code *should* be a break
+ * code, but nevertheless some AT keyboard interfaces send
+ * make codes instead. Therefore, simply ignore
+ * break_flag...
+ */
+ int keyval, keytyp;
+
+ set_bit(scancode, broken_keys);
+ self_test_last_rcv = jiffies;
+ /* new Linux scancodes; approx. */
+ keyval = scancode;
+ keytyp = KTYP(keyval) - 0xf0;
+ keyval = KVAL(keyval);
+
+ printk(KERN_WARNING "Key with scancode %d ", scancode);
+ if (keytyp == KT_LATIN || keytyp == KT_LETTER) {
+ if (keyval < ' ')
+ printk("('^%c') ", keyval + '@');
+ else
+ printk("('%c') ", keyval);
+ }
+ printk("is broken -- will be ignored.\n");
+ break;
+ } else if (test_bit(scancode, broken_keys))
+ break;
+
+ if (atari_input_keyboard_interrupt_hook)
+ atari_input_keyboard_interrupt_hook((unsigned char)scancode, !break_flag);
+ break;
+ }
+ break;
+
+ case AMOUSE:
+ kb_state.buf[kb_state.len++] = scancode;
+ if (kb_state.len == 5) {
+ kb_state.state = KEYBOARD;
+ /* not yet used */
+ /* wake up someone waiting for this */
+ }
+ break;
+
+ case RMOUSE:
+ kb_state.buf[kb_state.len++] = scancode;
+ if (kb_state.len == 3) {
+ kb_state.state = KEYBOARD;
+ if (atari_input_mouse_interrupt_hook)
+ atari_input_mouse_interrupt_hook(kb_state.buf);
+ }
+ break;
+
+ case JOYSTICK:
+ kb_state.buf[1] = scancode;
+ kb_state.state = KEYBOARD;
+#ifdef FIXED_ATARI_JOYSTICK
+ atari_joystick_interrupt(kb_state.buf);
+#endif
+ break;
+
+ case CLOCK:
+ kb_state.buf[kb_state.len++] = scancode;
+ if (kb_state.len == 6) {
+ kb_state.state = KEYBOARD;
+ /* wake up someone waiting for this.
+ But will this ever be used, as Linux keeps its own time.
+ Perhaps for synchronization purposes? */
+ /* wake_up_interruptible(&clock_wait); */
+ }
+ break;
+
+ case RESYNC:
+ if (kb_state.len <= 0 || IS_SYNC_CODE(scancode)) {
+ kb_state.state = KEYBOARD;
+ goto interpret_scancode;
+ }
+ kb_state.len--;
+ break;
+ }
+ }
+
+#if 0
+ if (acia_stat & ACIA_CTS)
+ /* cannot happen */;
+#endif
+
+ if (acia_stat & (ACIA_FE | ACIA_PE)) {
+ printk("Error in keyboard communication\n");
+ }
+
+ /* handle_scancode() can take a lot of time, so check again if
+ * some character arrived
+ */
+ goto repeat;
+}
+
+/*
+ * I write to the keyboard without using interrupts, I poll instead.
+ * This takes for the maximum length string allowed (7) at 7812.5 baud
+ * 8 data 1 start 1 stop bit: 9.0 ms
+ * If this takes too long for normal operation, interrupt driven writing
+ * is the solution. (I made a feeble attempt in that direction but I
+ * kept it simple for now.)
+ */
+void ikbd_write(const char *str, int len)
+{
+ u_char acia_stat;
+
+ if ((len < 1) || (len > 7))
+ panic("ikbd: maximum string length exceeded");
+ while (len) {
+ acia_stat = acia.key_ctrl;
+ if (acia_stat & ACIA_TDRE) {
+ acia.key_data = *str++;
+ len--;
+ }
+ }
+}
+
+/* Reset (without touching the clock) */
+void ikbd_reset(void)
+{
+ static const char cmd[2] = { 0x80, 0x01 };
+
+ ikbd_write(cmd, 2);
+
+ /*
+ * if all's well code 0xF1 is returned, else the break codes of
+ * all keys making contact
+ */
+}
+
+/* Set mouse button action */
+void ikbd_mouse_button_action(int mode)
+{
+ char cmd[2] = { 0x07, mode };
+
+ ikbd_write(cmd, 2);
+}
+
+/* Set relative mouse position reporting */
+void ikbd_mouse_rel_pos(void)
+{
+ static const char cmd[1] = { 0x08 };
+
+ ikbd_write(cmd, 1);
+}
+EXPORT_SYMBOL(ikbd_mouse_rel_pos);
+
+/* Set absolute mouse position reporting */
+void ikbd_mouse_abs_pos(int xmax, int ymax)
+{
+ char cmd[5] = { 0x09, xmax>>8, xmax&0xFF, ymax>>8, ymax&0xFF };
+
+ ikbd_write(cmd, 5);
+}
+
+/* Set mouse keycode mode */
+void ikbd_mouse_kbd_mode(int dx, int dy)
+{
+ char cmd[3] = { 0x0A, dx, dy };
+
+ ikbd_write(cmd, 3);
+}
+
+/* Set mouse threshold */
+void ikbd_mouse_thresh(int x, int y)
+{
+ char cmd[3] = { 0x0B, x, y };
+
+ ikbd_write(cmd, 3);
+}
+EXPORT_SYMBOL(ikbd_mouse_thresh);
+
+/* Set mouse scale */
+void ikbd_mouse_scale(int x, int y)
+{
+ char cmd[3] = { 0x0C, x, y };
+
+ ikbd_write(cmd, 3);
+}
+
+/* Interrogate mouse position */
+void ikbd_mouse_pos_get(int *x, int *y)
+{
+ static const char cmd[1] = { 0x0D };
+
+ ikbd_write(cmd, 1);
+
+ /* wait for returning bytes */
+}
+
+/* Load mouse position */
+void ikbd_mouse_pos_set(int x, int y)
+{
+ char cmd[6] = { 0x0E, 0x00, x>>8, x&0xFF, y>>8, y&0xFF };
+
+ ikbd_write(cmd, 6);
+}
+
+/* Set Y=0 at bottom */
+void ikbd_mouse_y0_bot(void)
+{
+ static const char cmd[1] = { 0x0F };
+
+ ikbd_write(cmd, 1);
+}
+
+/* Set Y=0 at top */
+void ikbd_mouse_y0_top(void)
+{
+ static const char cmd[1] = { 0x10 };
+
+ ikbd_write(cmd, 1);
+}
+EXPORT_SYMBOL(ikbd_mouse_y0_top);
+
+/* Disable mouse */
+void ikbd_mouse_disable(void)
+{
+ static const char cmd[1] = { 0x12 };
+
+ ikbd_write(cmd, 1);
+}
+EXPORT_SYMBOL(ikbd_mouse_disable);
+
+/* Set joystick event reporting */
+void ikbd_joystick_event_on(void)
+{
+ static const char cmd[1] = { 0x14 };
+
+ ikbd_write(cmd, 1);
+}
+
+/* Set joystick interrogation mode */
+void ikbd_joystick_event_off(void)
+{
+ static const char cmd[1] = { 0x15 };
+
+ ikbd_write(cmd, 1);
+}
+
+/* Joystick interrogation */
+void ikbd_joystick_get_state(void)
+{
+ static const char cmd[1] = { 0x16 };
+
+ ikbd_write(cmd, 1);
+}
+
+#if 0
+/* This disables all other ikbd activities !!!! */
+/* Set joystick monitoring */
+void ikbd_joystick_monitor(int rate)
+{
+ static const char cmd[2] = { 0x17, rate };
+
+ ikbd_write(cmd, 2);
+
+ kb_state.state = JOYSTICK_MONITOR;
+}
+#endif
+
+/* some joystick routines not in yet (0x18-0x19) */
+
+/* Disable joysticks */
+void ikbd_joystick_disable(void)
+{
+ static const char cmd[1] = { 0x1A };
+
+ ikbd_write(cmd, 1);
+}
+
+/*
+ * The original code sometimes left the interrupt line of
+ * the ACIAs low forever. I hope, it is fixed now.
+ *
+ * Martin Rogge, 20 Aug 1995
+ */
+
+static int atari_keyb_done = 0;
+
+int atari_keyb_init(void)
+{
+ int error;
+
+ if (atari_keyb_done)
+ return 0;
+
+ kb_state.state = KEYBOARD;
+ kb_state.len = 0;
+
+ error = request_irq(IRQ_MFP_ACIA, atari_keyboard_interrupt, 0,
+ "keyboard,mouse,MIDI", atari_keyboard_interrupt);
+ if (error)
+ return error;
+
+ atari_turnoff_irq(IRQ_MFP_ACIA);
+ do {
+ /* reset IKBD ACIA */
+ acia.key_ctrl = ACIA_RESET |
+ ((atari_switches & ATARI_SWITCH_IKBD) ?
+ ACIA_RHTID : 0);
+ (void)acia.key_ctrl;
+ (void)acia.key_data;
+
+ /* reset MIDI ACIA */
+ acia.mid_ctrl = ACIA_RESET |
+ ((atari_switches & ATARI_SWITCH_MIDI) ?
+ ACIA_RHTID : 0);
+ (void)acia.mid_ctrl;
+ (void)acia.mid_data;
+
+ /* divide 500kHz by 64 gives 7812.5 baud */
+ /* 8 data no parity 1 start 1 stop bit */
+ /* receive interrupt enabled */
+ /* RTS low (except if switch selected), transmit interrupt disabled */
+ acia.key_ctrl = (ACIA_DIV64|ACIA_D8N1S|ACIA_RIE) |
+ ((atari_switches & ATARI_SWITCH_IKBD) ?
+ ACIA_RHTID : ACIA_RLTID);
+
+ acia.mid_ctrl = ACIA_DIV16 | ACIA_D8N1S |
+ ((atari_switches & ATARI_SWITCH_MIDI) ?
+ ACIA_RHTID : 0);
+
+ /* make sure the interrupt line is up */
+ } while ((st_mfp.par_dt_reg & 0x10) == 0);
+
+ /* enable ACIA Interrupts */
+ st_mfp.active_edge &= ~0x10;
+ atari_turnon_irq(IRQ_MFP_ACIA);
+
+ ikbd_self_test = 1;
+ ikbd_reset();
+ /* wait for a period of inactivity (here: 0.25s), then assume the IKBD's
+ * self-test is finished */
+ self_test_last_rcv = jiffies;
+ while (time_before(jiffies, self_test_last_rcv + HZ/4))
+ barrier();
+ /* if not incremented: no 0xf1 received */
+ if (ikbd_self_test == 1)
+ printk(KERN_ERR "WARNING: keyboard self test failed!\n");
+ ikbd_self_test = 0;
+
+ ikbd_mouse_disable();
+ ikbd_joystick_disable();
+
+#ifdef FIXED_ATARI_JOYSTICK
+ atari_joystick_init();
+#endif
+
+ // flag init done
+ atari_keyb_done = 1;
+ return 0;
+}
+EXPORT_SYMBOL_GPL(atari_keyb_init);
diff --git a/kernel/arch/m68k/atari/atasound.c b/kernel/arch/m68k/atari/atasound.c
new file mode 100644
index 000000000..1c1181ebb
--- /dev/null
+++ b/kernel/arch/m68k/atari/atasound.c
@@ -0,0 +1,110 @@
+/*
+ * linux/arch/m68k/atari/atasound.c
+ *
+ * ++Geert: Moved almost all stuff to linux/drivers/sound/
+ *
+ * The author of atari_nosound, atari_mksound and atari_microwire_cmd is
+ * unknown. (++roman: That's me... :-)
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file COPYING in the main directory of this archive
+ * for more details.
+ *
+ * 1998-05-31 ++andreas: atari_mksound rewritten to always use the envelope,
+ * no timer, atari_nosound removed.
+ *
+ */
+
+
+#include <linux/sched.h>
+#include <linux/timer.h>
+#include <linux/major.h>
+#include <linux/fcntl.h>
+#include <linux/errno.h>
+#include <linux/mm.h>
+#include <linux/module.h>
+
+#include <asm/atarihw.h>
+#include <asm/irq.h>
+#include <asm/pgtable.h>
+#include <asm/atariints.h>
+
+
+/*
+ * stuff from the old atasound.c
+ */
+
+void atari_microwire_cmd (int cmd)
+{
+ tt_microwire.mask = 0x7ff;
+ tt_microwire.data = MW_LM1992_ADDR | cmd;
+
+ /* Busy wait for data being completely sent :-( */
+ while( tt_microwire.mask != 0x7ff)
+ ;
+}
+EXPORT_SYMBOL(atari_microwire_cmd);
+
+
+/* PSG base frequency */
+#define PSG_FREQ 125000
+/* PSG envelope base frequency times 10 */
+#define PSG_ENV_FREQ_10 78125
+
+void atari_mksound (unsigned int hz, unsigned int ticks)
+{
+ /* Generates sound of some frequency for some number of clock
+ ticks. */
+ unsigned long flags;
+ unsigned char tmp;
+ int period;
+
+ local_irq_save(flags);
+
+
+ /* Disable generator A in mixer control. */
+ sound_ym.rd_data_reg_sel = 7;
+ tmp = sound_ym.rd_data_reg_sel;
+ tmp |= 011;
+ sound_ym.wd_data = tmp;
+
+ if (hz) {
+ /* Convert from frequency value to PSG period value (base
+ frequency 125 kHz). */
+
+ period = PSG_FREQ / hz;
+
+ if (period > 0xfff) period = 0xfff;
+
+ /* Set generator A frequency to hz. */
+ sound_ym.rd_data_reg_sel = 0;
+ sound_ym.wd_data = period & 0xff;
+ sound_ym.rd_data_reg_sel = 1;
+ sound_ym.wd_data = (period >> 8) & 0xf;
+ if (ticks) {
+ /* Set length of envelope (max 8 sec). */
+ int length = (ticks * PSG_ENV_FREQ_10) / HZ / 10;
+
+ if (length > 0xffff) length = 0xffff;
+ sound_ym.rd_data_reg_sel = 11;
+ sound_ym.wd_data = length & 0xff;
+ sound_ym.rd_data_reg_sel = 12;
+ sound_ym.wd_data = length >> 8;
+ /* Envelope form: max -> min single. */
+ sound_ym.rd_data_reg_sel = 13;
+ sound_ym.wd_data = 0;
+ /* Use envelope for generator A. */
+ sound_ym.rd_data_reg_sel = 8;
+ sound_ym.wd_data = 0x10;
+ } else {
+ /* Set generator A level to maximum, no envelope. */
+ sound_ym.rd_data_reg_sel = 8;
+ sound_ym.wd_data = 15;
+ }
+ /* Turn on generator A in mixer control. */
+ sound_ym.rd_data_reg_sel = 7;
+ tmp &= ~1;
+ sound_ym.wd_data = tmp;
+ }
+ local_irq_restore(flags);
+}
diff --git a/kernel/arch/m68k/atari/config.c b/kernel/arch/m68k/atari/config.c
new file mode 100644
index 000000000..192b00f09
--- /dev/null
+++ b/kernel/arch/m68k/atari/config.c
@@ -0,0 +1,925 @@
+/*
+ * linux/arch/m68k/atari/config.c
+ *
+ * Copyright (C) 1994 Bjoern Brauel
+ *
+ * 5/2/94 Roman Hodek:
+ * Added setting of time_adj to get a better clock.
+ *
+ * 5/14/94 Roman Hodek:
+ * gettod() for TT
+ *
+ * 5/15/94 Roman Hodek:
+ * hard_reset_now() for Atari (and others?)
+ *
+ * 94/12/30 Andreas Schwab:
+ * atari_sched_init fixed to get precise clock.
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file COPYING in the main directory of this archive
+ * for more details.
+ */
+
+/*
+ * Miscellaneous atari stuff
+ */
+
+#include <linux/types.h>
+#include <linux/mm.h>
+#include <linux/seq_file.h>
+#include <linux/console.h>
+#include <linux/init.h>
+#include <linux/delay.h>
+#include <linux/ioport.h>
+#include <linux/platform_device.h>
+#include <linux/usb/isp116x.h>
+#include <linux/vt_kern.h>
+#include <linux/module.h>
+
+#include <asm/bootinfo.h>
+#include <asm/bootinfo-atari.h>
+#include <asm/byteorder.h>
+#include <asm/setup.h>
+#include <asm/atarihw.h>
+#include <asm/atariints.h>
+#include <asm/atari_stram.h>
+#include <asm/machdep.h>
+#include <asm/hwtest.h>
+#include <asm/io.h>
+
+u_long atari_mch_cookie;
+EXPORT_SYMBOL(atari_mch_cookie);
+
+u_long atari_mch_type;
+EXPORT_SYMBOL(atari_mch_type);
+
+struct atari_hw_present atari_hw_present;
+EXPORT_SYMBOL(atari_hw_present);
+
+u_long atari_switches;
+EXPORT_SYMBOL(atari_switches);
+
+int atari_dont_touch_floppy_select;
+EXPORT_SYMBOL(atari_dont_touch_floppy_select);
+
+int atari_rtc_year_offset;
+
+/* local function prototypes */
+static void atari_reset(void);
+static void atari_get_model(char *model);
+static void atari_get_hardware_list(struct seq_file *m);
+
+/* atari specific irq functions */
+extern void atari_init_IRQ (void);
+extern void atari_mksound(unsigned int count, unsigned int ticks);
+#ifdef CONFIG_HEARTBEAT
+static void atari_heartbeat(int on);
+#endif
+
+/* atari specific timer functions (in time.c) */
+extern void atari_sched_init(irq_handler_t);
+extern u32 atari_gettimeoffset(void);
+extern int atari_mste_hwclk (int, struct rtc_time *);
+extern int atari_tt_hwclk (int, struct rtc_time *);
+extern int atari_mste_set_clock_mmss (unsigned long);
+extern int atari_tt_set_clock_mmss (unsigned long);
+
+
+/* ++roman: This is a more elaborate test for an SCC chip, since the plain
+ * Medusa board generates DTACK at the SCC's standard addresses, but a SCC
+ * board in the Medusa is possible. Also, the addresses where the ST_ESCC
+ * resides generate DTACK without the chip, too.
+ * The method is to write values into the interrupt vector register, that
+ * should be readable without trouble (from channel A!).
+ */
+
+static int __init scc_test(volatile char *ctla)
+{
+ if (!hwreg_present(ctla))
+ return 0;
+ MFPDELAY();
+
+ *ctla = 2;
+ MFPDELAY();
+ *ctla = 0x40;
+ MFPDELAY();
+
+ *ctla = 2;
+ MFPDELAY();
+ if (*ctla != 0x40)
+ return 0;
+ MFPDELAY();
+
+ *ctla = 2;
+ MFPDELAY();
+ *ctla = 0x60;
+ MFPDELAY();
+
+ *ctla = 2;
+ MFPDELAY();
+ if (*ctla != 0x60)
+ return 0;
+
+ return 1;
+}
+
+
+ /*
+ * Parse an Atari-specific record in the bootinfo
+ */
+
+int __init atari_parse_bootinfo(const struct bi_record *record)
+{
+ int unknown = 0;
+ const void *data = record->data;
+
+ switch (be16_to_cpu(record->tag)) {
+ case BI_ATARI_MCH_COOKIE:
+ atari_mch_cookie = be32_to_cpup(data);
+ break;
+ case BI_ATARI_MCH_TYPE:
+ atari_mch_type = be32_to_cpup(data);
+ break;
+ default:
+ unknown = 1;
+ break;
+ }
+ return unknown;
+}
+
+
+/* Parse the Atari-specific switches= option. */
+static int __init atari_switches_setup(char *str)
+{
+ char switches[strlen(str) + 1];
+ char *p;
+ int ovsc_shift;
+ char *args = switches;
+
+ if (!MACH_IS_ATARI)
+ return 0;
+
+ /* copy string to local array, strsep works destructively... */
+ strcpy(switches, str);
+ atari_switches = 0;
+
+ /* parse the options */
+ while ((p = strsep(&args, ",")) != NULL) {
+ if (!*p)
+ continue;
+ ovsc_shift = 0;
+ if (strncmp(p, "ov_", 3) == 0) {
+ p += 3;
+ ovsc_shift = ATARI_SWITCH_OVSC_SHIFT;
+ }
+
+ if (strcmp(p, "ikbd") == 0) {
+ /* RTS line of IKBD ACIA */
+ atari_switches |= ATARI_SWITCH_IKBD << ovsc_shift;
+ } else if (strcmp(p, "midi") == 0) {
+ /* RTS line of MIDI ACIA */
+ atari_switches |= ATARI_SWITCH_MIDI << ovsc_shift;
+ } else if (strcmp(p, "snd6") == 0) {
+ atari_switches |= ATARI_SWITCH_SND6 << ovsc_shift;
+ } else if (strcmp(p, "snd7") == 0) {
+ atari_switches |= ATARI_SWITCH_SND7 << ovsc_shift;
+ }
+ }
+ return 0;
+}
+
+early_param("switches", atari_switches_setup);
+
+
+ /*
+ * Setup the Atari configuration info
+ */
+
+void __init config_atari(void)
+{
+ unsigned short tos_version;
+
+ memset(&atari_hw_present, 0, sizeof(atari_hw_present));
+
+ /* Change size of I/O space from 64KB to 4GB. */
+ ioport_resource.end = 0xFFFFFFFF;
+
+ mach_sched_init = atari_sched_init;
+ mach_init_IRQ = atari_init_IRQ;
+ mach_get_model = atari_get_model;
+ mach_get_hardware_list = atari_get_hardware_list;
+ arch_gettimeoffset = atari_gettimeoffset;
+ mach_reset = atari_reset;
+ mach_max_dma_address = 0xffffff;
+#if defined(CONFIG_INPUT_M68K_BEEP) || defined(CONFIG_INPUT_M68K_BEEP_MODULE)
+ mach_beep = atari_mksound;
+#endif
+#ifdef CONFIG_HEARTBEAT
+ mach_heartbeat = atari_heartbeat;
+#endif
+
+ /* Set switches as requested by the user */
+ if (atari_switches & ATARI_SWITCH_IKBD)
+ acia.key_ctrl = ACIA_DIV64 | ACIA_D8N1S | ACIA_RHTID;
+ if (atari_switches & ATARI_SWITCH_MIDI)
+ acia.mid_ctrl = ACIA_DIV16 | ACIA_D8N1S | ACIA_RHTID;
+ if (atari_switches & (ATARI_SWITCH_SND6|ATARI_SWITCH_SND7)) {
+ sound_ym.rd_data_reg_sel = 14;
+ sound_ym.wd_data = sound_ym.rd_data_reg_sel |
+ ((atari_switches&ATARI_SWITCH_SND6) ? 0x40 : 0) |
+ ((atari_switches&ATARI_SWITCH_SND7) ? 0x80 : 0);
+ }
+
+ /* ++bjoern:
+ * Determine hardware present
+ */
+
+ printk("Atari hardware found: ");
+ if (MACH_IS_MEDUSA) {
+ /* There's no Atari video hardware on the Medusa, but all the
+ * addresses below generate a DTACK so no bus error occurs! */
+ } else if (hwreg_present(f030_xreg)) {
+ ATARIHW_SET(VIDEL_SHIFTER);
+ printk("VIDEL ");
+ /* This is a temporary hack: If there is Falcon video
+ * hardware, we assume that the ST-DMA serves SCSI instead of
+ * ACSI. In the future, there should be a better method for
+ * this...
+ */
+ ATARIHW_SET(ST_SCSI);
+ printk("STDMA-SCSI ");
+ } else if (hwreg_present(tt_palette)) {
+ ATARIHW_SET(TT_SHIFTER);
+ printk("TT_SHIFTER ");
+ } else if (hwreg_present(&shifter.bas_hi)) {
+ if (hwreg_present(&shifter.bas_lo) &&
+ (shifter.bas_lo = 0x0aau, shifter.bas_lo == 0x0aau)) {
+ ATARIHW_SET(EXTD_SHIFTER);
+ printk("EXTD_SHIFTER ");
+ } else {
+ ATARIHW_SET(STND_SHIFTER);
+ printk("STND_SHIFTER ");
+ }
+ }
+ if (hwreg_present(&st_mfp.par_dt_reg)) {
+ ATARIHW_SET(ST_MFP);
+ printk("ST_MFP ");
+ }
+ if (hwreg_present(&tt_mfp.par_dt_reg)) {
+ ATARIHW_SET(TT_MFP);
+ printk("TT_MFP ");
+ }
+ if (hwreg_present(&tt_scsi_dma.dma_addr_hi)) {
+ ATARIHW_SET(SCSI_DMA);
+ printk("TT_SCSI_DMA ");
+ }
+ /*
+ * The ST-DMA address registers aren't readable
+ * on all Medusas, so the test below may fail
+ */
+ if (MACH_IS_MEDUSA ||
+ (hwreg_present(&st_dma.dma_vhi) &&
+ (st_dma.dma_vhi = 0x55) && (st_dma.dma_hi = 0xaa) &&
+ st_dma.dma_vhi == 0x55 && st_dma.dma_hi == 0xaa &&
+ (st_dma.dma_vhi = 0xaa) && (st_dma.dma_hi = 0x55) &&
+ st_dma.dma_vhi == 0xaa && st_dma.dma_hi == 0x55)) {
+ ATARIHW_SET(EXTD_DMA);
+ printk("EXTD_DMA ");
+ }
+ if (hwreg_present(&tt_scsi.scsi_data)) {
+ ATARIHW_SET(TT_SCSI);
+ printk("TT_SCSI ");
+ }
+ if (hwreg_present(&sound_ym.rd_data_reg_sel)) {
+ ATARIHW_SET(YM_2149);
+ printk("YM2149 ");
+ }
+ if (!MACH_IS_MEDUSA && hwreg_present(&tt_dmasnd.ctrl)) {
+ ATARIHW_SET(PCM_8BIT);
+ printk("PCM ");
+ }
+ if (hwreg_present(&falcon_codec.unused5)) {
+ ATARIHW_SET(CODEC);
+ printk("CODEC ");
+ }
+ if (hwreg_present(&dsp56k_host_interface.icr)) {
+ ATARIHW_SET(DSP56K);
+ printk("DSP56K ");
+ }
+ if (hwreg_present(&tt_scc_dma.dma_ctrl) &&
+#if 0
+ /* This test sucks! Who knows some better? */
+ (tt_scc_dma.dma_ctrl = 0x01, (tt_scc_dma.dma_ctrl & 1) == 1) &&
+ (tt_scc_dma.dma_ctrl = 0x00, (tt_scc_dma.dma_ctrl & 1) == 0)
+#else
+ !MACH_IS_MEDUSA
+#endif
+ ) {
+ ATARIHW_SET(SCC_DMA);
+ printk("SCC_DMA ");
+ }
+ if (scc_test(&atari_scc.cha_a_ctrl)) {
+ ATARIHW_SET(SCC);
+ printk("SCC ");
+ }
+ if (scc_test(&st_escc.cha_b_ctrl)) {
+ ATARIHW_SET(ST_ESCC);
+ printk("ST_ESCC ");
+ }
+ if (hwreg_present(&tt_scu.sys_mask)) {
+ ATARIHW_SET(SCU);
+ /* Assume a VME bus if there's a SCU */
+ ATARIHW_SET(VME);
+ printk("VME SCU ");
+ }
+ if (hwreg_present((void *)(0xffff9210))) {
+ ATARIHW_SET(ANALOG_JOY);
+ printk("ANALOG_JOY ");
+ }
+ if (hwreg_present(blitter.halftone)) {
+ ATARIHW_SET(BLITTER);
+ printk("BLITTER ");
+ }
+ if (hwreg_present((void *)0xfff00039)) {
+ ATARIHW_SET(IDE);
+ printk("IDE ");
+ }
+#if 1 /* This maybe wrong */
+ if (!MACH_IS_MEDUSA && hwreg_present(&tt_microwire.data) &&
+ hwreg_present(&tt_microwire.mask) &&
+ (tt_microwire.mask = 0x7ff,
+ udelay(1),
+ tt_microwire.data = MW_LM1992_PSG_HIGH | MW_LM1992_ADDR,
+ udelay(1),
+ tt_microwire.data != 0)) {
+ ATARIHW_SET(MICROWIRE);
+ while (tt_microwire.mask != 0x7ff)
+ ;
+ printk("MICROWIRE ");
+ }
+#endif
+ if (hwreg_present(&tt_rtc.regsel)) {
+ ATARIHW_SET(TT_CLK);
+ printk("TT_CLK ");
+ mach_hwclk = atari_tt_hwclk;
+ mach_set_clock_mmss = atari_tt_set_clock_mmss;
+ }
+ if (hwreg_present(&mste_rtc.sec_ones)) {
+ ATARIHW_SET(MSTE_CLK);
+ printk("MSTE_CLK ");
+ mach_hwclk = atari_mste_hwclk;
+ mach_set_clock_mmss = atari_mste_set_clock_mmss;
+ }
+ if (!MACH_IS_MEDUSA && hwreg_present(&dma_wd.fdc_speed) &&
+ hwreg_write(&dma_wd.fdc_speed, 0)) {
+ ATARIHW_SET(FDCSPEED);
+ printk("FDC_SPEED ");
+ }
+ if (!ATARIHW_PRESENT(ST_SCSI)) {
+ ATARIHW_SET(ACSI);
+ printk("ACSI ");
+ }
+ printk("\n");
+
+ if (CPU_IS_040_OR_060)
+ /* Now it seems to be safe to turn of the tt0 transparent
+ * translation (the one that must not be turned off in
+ * head.S...)
+ */
+ asm volatile ("\n"
+ " moveq #0,%%d0\n"
+ " .chip 68040\n"
+ " movec %%d0,%%itt0\n"
+ " movec %%d0,%%dtt0\n"
+ " .chip 68k"
+ : /* no outputs */
+ : /* no inputs */
+ : "d0");
+
+ /* allocator for memory that must reside in st-ram */
+ atari_stram_init();
+
+ /* Set up a mapping for the VMEbus address region:
+ *
+ * VME is either at phys. 0xfexxxxxx (TT) or 0xa00000..0xdfffff
+ * (MegaSTE) In both cases, the whole 16 MB chunk is mapped at
+ * 0xfe000000 virt., because this can be done with a single
+ * transparent translation. On the 68040, lots of often unused
+ * page tables would be needed otherwise. On a MegaSTE or similar,
+ * the highest byte is stripped off by hardware due to the 24 bit
+ * design of the bus.
+ */
+
+ if (CPU_IS_020_OR_030) {
+ unsigned long tt1_val;
+ tt1_val = 0xfe008543; /* Translate 0xfexxxxxx, enable, cache
+ * inhibit, read and write, FDC mask = 3,
+ * FDC val = 4 -> Supervisor only */
+ asm volatile ("\n"
+ " .chip 68030\n"
+ " pmove %0,%/tt1\n"
+ " .chip 68k"
+ : : "m" (tt1_val));
+ } else {
+ asm volatile ("\n"
+ " .chip 68040\n"
+ " movec %0,%%itt1\n"
+ " movec %0,%%dtt1\n"
+ " .chip 68k"
+ :
+ : "d" (0xfe00a040)); /* Translate 0xfexxxxxx, enable,
+ * supervisor only, non-cacheable/
+ * serialized, writable */
+
+ }
+
+ /* Fetch tos version at Physical 2 */
+ /*
+ * We my not be able to access this address if the kernel is
+ * loaded to st ram, since the first page is unmapped. On the
+ * Medusa this is always the case and there is nothing we can do
+ * about this, so we just assume the smaller offset. For the TT
+ * we use the fact that in head.S we have set up a mapping
+ * 0xFFxxxxxx -> 0x00xxxxxx, so that the first 16MB is accessible
+ * in the last 16MB of the address space.
+ */
+ tos_version = (MACH_IS_MEDUSA) ?
+ 0xfff : *(unsigned short *)0xff000002;
+ atari_rtc_year_offset = (tos_version < 0x306) ? 70 : 68;
+}
+
+#ifdef CONFIG_HEARTBEAT
+static void atari_heartbeat(int on)
+{
+ unsigned char tmp;
+ unsigned long flags;
+
+ if (atari_dont_touch_floppy_select)
+ return;
+
+ local_irq_save(flags);
+ sound_ym.rd_data_reg_sel = 14; /* Select PSG Port A */
+ tmp = sound_ym.rd_data_reg_sel;
+ sound_ym.wd_data = on ? (tmp & ~0x02) : (tmp | 0x02);
+ local_irq_restore(flags);
+}
+#endif
+
+/* ++roman:
+ *
+ * This function does a reset on machines that lack the ability to
+ * assert the processor's _RESET signal somehow via hardware. It is
+ * based on the fact that you can find the initial SP and PC values
+ * after a reset at physical addresses 0 and 4. This works pretty well
+ * for Atari machines, since the lowest 8 bytes of physical memory are
+ * really ROM (mapped by hardware). For other 680x0 machines: don't
+ * know if it works...
+ *
+ * To get the values at addresses 0 and 4, the MMU better is turned
+ * off first. After that, we have to jump into physical address space
+ * (the PC before the pmove statement points to the virtual address of
+ * the code). Getting that physical address is not hard, but the code
+ * becomes a bit complex since I've tried to ensure that the jump
+ * statement after the pmove is in the cache already (otherwise the
+ * processor can't fetch it!). For that, the code first jumps to the
+ * jump statement with the (virtual) address of the pmove section in
+ * an address register . The jump statement is surely in the cache
+ * now. After that, that physical address of the reset code is loaded
+ * into the same address register, pmove is done and the same jump
+ * statements goes to the reset code. Since there are not many
+ * statements between the two jumps, I hope it stays in the cache.
+ *
+ * The C code makes heavy use of the GCC features that you can get the
+ * address of a C label. No hope to compile this with another compiler
+ * than GCC!
+ */
+
+/* ++andreas: no need for complicated code, just depend on prefetch */
+
+static void atari_reset(void)
+{
+ long tc_val = 0;
+ long reset_addr;
+
+ /*
+ * On the Medusa, phys. 0x4 may contain garbage because it's no
+ * ROM. See above for explanation why we cannot use PTOV(4).
+ */
+ reset_addr = MACH_IS_MEDUSA || MACH_IS_AB40 ? 0xe00030 :
+ *(unsigned long *) 0xff000004;
+
+ /* reset ACIA for switch off OverScan, if it's active */
+ if (atari_switches & ATARI_SWITCH_OVSC_IKBD)
+ acia.key_ctrl = ACIA_RESET;
+ if (atari_switches & ATARI_SWITCH_OVSC_MIDI)
+ acia.mid_ctrl = ACIA_RESET;
+
+ /* processor independent: turn off interrupts and reset the VBR;
+ * the caches must be left enabled, else prefetching the final jump
+ * instruction doesn't work.
+ */
+ local_irq_disable();
+ asm volatile ("movec %0,%%vbr"
+ : : "d" (0));
+
+ if (CPU_IS_040_OR_060) {
+ unsigned long jmp_addr040 = virt_to_phys(&&jmp_addr_label040);
+ if (CPU_IS_060) {
+ /* 68060: clear PCR to turn off superscalar operation */
+ asm volatile ("\n"
+ " .chip 68060\n"
+ " movec %0,%%pcr\n"
+ " .chip 68k"
+ : : "d" (0));
+ }
+
+ asm volatile ("\n"
+ " move.l %0,%%d0\n"
+ " and.l #0xff000000,%%d0\n"
+ " or.w #0xe020,%%d0\n" /* map 16 MB, enable, cacheable */
+ " .chip 68040\n"
+ " movec %%d0,%%itt0\n"
+ " movec %%d0,%%dtt0\n"
+ " .chip 68k\n"
+ " jmp %0@"
+ : : "a" (jmp_addr040)
+ : "d0");
+ jmp_addr_label040:
+ asm volatile ("\n"
+ " moveq #0,%%d0\n"
+ " nop\n"
+ " .chip 68040\n"
+ " cinva %%bc\n"
+ " nop\n"
+ " pflusha\n"
+ " nop\n"
+ " movec %%d0,%%tc\n"
+ " nop\n"
+ /* the following setup of transparent translations is needed on the
+ * Afterburner040 to successfully reboot. Other machines shouldn't
+ * care about a different tt regs setup, they also didn't care in
+ * the past that the regs weren't turned off. */
+ " move.l #0xffc000,%%d0\n" /* whole insn space cacheable */
+ " movec %%d0,%%itt0\n"
+ " movec %%d0,%%itt1\n"
+ " or.w #0x40,%/d0\n" /* whole data space non-cacheable/ser. */
+ " movec %%d0,%%dtt0\n"
+ " movec %%d0,%%dtt1\n"
+ " .chip 68k\n"
+ " jmp %0@"
+ : /* no outputs */
+ : "a" (reset_addr)
+ : "d0");
+ } else
+ asm volatile ("\n"
+ " pmove %0,%%tc\n"
+ " jmp %1@"
+ : /* no outputs */
+ : "m" (tc_val), "a" (reset_addr));
+}
+
+
+static void atari_get_model(char *model)
+{
+ strcpy(model, "Atari ");
+ switch (atari_mch_cookie >> 16) {
+ case ATARI_MCH_ST:
+ if (ATARIHW_PRESENT(MSTE_CLK))
+ strcat(model, "Mega ST");
+ else
+ strcat(model, "ST");
+ break;
+ case ATARI_MCH_STE:
+ if (MACH_IS_MSTE)
+ strcat(model, "Mega STE");
+ else
+ strcat(model, "STE");
+ break;
+ case ATARI_MCH_TT:
+ if (MACH_IS_MEDUSA)
+ /* Medusa has TT _MCH cookie */
+ strcat(model, "Medusa");
+ else
+ strcat(model, "TT");
+ break;
+ case ATARI_MCH_FALCON:
+ strcat(model, "Falcon");
+ if (MACH_IS_AB40)
+ strcat(model, " (with Afterburner040)");
+ break;
+ default:
+ sprintf(model + strlen(model), "(unknown mach cookie 0x%lx)",
+ atari_mch_cookie);
+ break;
+ }
+}
+
+
+static void atari_get_hardware_list(struct seq_file *m)
+{
+ int i;
+
+ for (i = 0; i < m68k_num_memory; i++)
+ seq_printf(m, "\t%3ld MB at 0x%08lx (%s)\n",
+ m68k_memory[i].size >> 20, m68k_memory[i].addr,
+ (m68k_memory[i].addr & 0xff000000 ?
+ "alternate RAM" : "ST-RAM"));
+
+#define ATARIHW_ANNOUNCE(name, str) \
+ if (ATARIHW_PRESENT(name)) \
+ seq_printf(m, "\t%s\n", str)
+
+ seq_printf(m, "Detected hardware:\n");
+ ATARIHW_ANNOUNCE(STND_SHIFTER, "ST Shifter");
+ ATARIHW_ANNOUNCE(EXTD_SHIFTER, "STe Shifter");
+ ATARIHW_ANNOUNCE(TT_SHIFTER, "TT Shifter");
+ ATARIHW_ANNOUNCE(VIDEL_SHIFTER, "Falcon Shifter");
+ ATARIHW_ANNOUNCE(YM_2149, "Programmable Sound Generator");
+ ATARIHW_ANNOUNCE(PCM_8BIT, "PCM 8 Bit Sound");
+ ATARIHW_ANNOUNCE(CODEC, "CODEC Sound");
+ ATARIHW_ANNOUNCE(TT_SCSI, "SCSI Controller NCR5380 (TT style)");
+ ATARIHW_ANNOUNCE(ST_SCSI, "SCSI Controller NCR5380 (Falcon style)");
+ ATARIHW_ANNOUNCE(ACSI, "ACSI Interface");
+ ATARIHW_ANNOUNCE(IDE, "IDE Interface");
+ ATARIHW_ANNOUNCE(FDCSPEED, "8/16 Mhz Switch for FDC");
+ ATARIHW_ANNOUNCE(ST_MFP, "Multi Function Peripheral MFP 68901");
+ ATARIHW_ANNOUNCE(TT_MFP, "Second Multi Function Peripheral MFP 68901");
+ ATARIHW_ANNOUNCE(SCC, "Serial Communications Controller SCC 8530");
+ ATARIHW_ANNOUNCE(ST_ESCC, "Extended Serial Communications Controller SCC 85230");
+ ATARIHW_ANNOUNCE(ANALOG_JOY, "Paddle Interface");
+ ATARIHW_ANNOUNCE(MICROWIRE, "MICROWIRE(tm) Interface");
+ ATARIHW_ANNOUNCE(STND_DMA, "DMA Controller (24 bit)");
+ ATARIHW_ANNOUNCE(EXTD_DMA, "DMA Controller (32 bit)");
+ ATARIHW_ANNOUNCE(SCSI_DMA, "DMA Controller for NCR5380");
+ ATARIHW_ANNOUNCE(SCC_DMA, "DMA Controller for SCC");
+ ATARIHW_ANNOUNCE(TT_CLK, "Clock Chip MC146818A");
+ ATARIHW_ANNOUNCE(MSTE_CLK, "Clock Chip RP5C15");
+ ATARIHW_ANNOUNCE(SCU, "System Control Unit");
+ ATARIHW_ANNOUNCE(BLITTER, "Blitter");
+ ATARIHW_ANNOUNCE(VME, "VME Bus");
+ ATARIHW_ANNOUNCE(DSP56K, "DSP56001 processor");
+}
+
+/*
+ * MSch: initial platform device support for Atari,
+ * required for EtherNAT/EtherNEC/NetUSBee drivers
+ */
+
+#if defined(CONFIG_ATARI_ETHERNAT) || defined(CONFIG_ATARI_ETHERNEC)
+static void isp1160_delay(struct device *dev, int delay)
+{
+ ndelay(delay);
+}
+#endif
+
+#ifdef CONFIG_ATARI_ETHERNAT
+/*
+ * EtherNAT: SMC91C111 Ethernet chipset, handled by smc91x driver
+ */
+
+#define ATARI_ETHERNAT_IRQ 140
+
+static struct resource smc91x_resources[] = {
+ [0] = {
+ .name = "smc91x-regs",
+ .start = ATARI_ETHERNAT_PHYS_ADDR,
+ .end = ATARI_ETHERNAT_PHYS_ADDR + 0xfffff,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .name = "smc91x-irq",
+ .start = ATARI_ETHERNAT_IRQ,
+ .end = ATARI_ETHERNAT_IRQ,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device smc91x_device = {
+ .name = "smc91x",
+ .id = -1,
+ .num_resources = ARRAY_SIZE(smc91x_resources),
+ .resource = smc91x_resources,
+};
+
+/*
+ * ISP 1160 - using the isp116x-hcd module
+ */
+
+#define ATARI_USB_PHYS_ADDR 0x80000012
+#define ATARI_USB_IRQ 139
+
+static struct resource isp1160_resources[] = {
+ [0] = {
+ .name = "isp1160-data",
+ .start = ATARI_USB_PHYS_ADDR,
+ .end = ATARI_USB_PHYS_ADDR + 0x1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .name = "isp1160-regs",
+ .start = ATARI_USB_PHYS_ADDR + 0x4,
+ .end = ATARI_USB_PHYS_ADDR + 0x5,
+ .flags = IORESOURCE_MEM,
+ },
+ [2] = {
+ .name = "isp1160-irq",
+ .start = ATARI_USB_IRQ,
+ .end = ATARI_USB_IRQ,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+/* (DataBusWidth16|AnalogOCEnable|DREQOutputPolarity|DownstreamPort15KRSel ) */
+static struct isp116x_platform_data isp1160_platform_data = {
+ /* Enable internal resistors on downstream ports */
+ .sel15Kres = 1,
+ /* On-chip overcurrent protection */
+ .oc_enable = 1,
+ /* INT output polarity */
+ .int_act_high = 1,
+ /* INT edge or level triggered */
+ .int_edge_triggered = 0,
+
+ /* WAKEUP pin connected - NOT SUPPORTED */
+ /* .remote_wakeup_connected = 0, */
+ /* Wakeup by devices on usb bus enabled */
+ .remote_wakeup_enable = 0,
+ .delay = isp1160_delay,
+};
+
+static struct platform_device isp1160_device = {
+ .name = "isp116x-hcd",
+ .id = 0,
+ .num_resources = ARRAY_SIZE(isp1160_resources),
+ .resource = isp1160_resources,
+ .dev = {
+ .platform_data = &isp1160_platform_data,
+ },
+};
+
+static struct platform_device *atari_ethernat_devices[] __initdata = {
+ &smc91x_device,
+ &isp1160_device
+};
+#endif /* CONFIG_ATARI_ETHERNAT */
+
+#ifdef CONFIG_ATARI_ETHERNEC
+/*
+ * EtherNEC: RTL8019 (NE2000 compatible) Ethernet chipset,
+ * handled by ne.c driver
+ */
+
+#define ATARI_ETHERNEC_PHYS_ADDR 0xfffa0000
+#define ATARI_ETHERNEC_BASE 0x300
+#define ATARI_ETHERNEC_IRQ IRQ_MFP_TIMER1
+
+static struct resource rtl8019_resources[] = {
+ [0] = {
+ .name = "rtl8019-regs",
+ .start = ATARI_ETHERNEC_BASE,
+ .end = ATARI_ETHERNEC_BASE + 0x20 - 1,
+ .flags = IORESOURCE_IO,
+ },
+ [1] = {
+ .name = "rtl8019-irq",
+ .start = ATARI_ETHERNEC_IRQ,
+ .end = ATARI_ETHERNEC_IRQ,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device rtl8019_device = {
+ .name = "ne",
+ .id = -1,
+ .num_resources = ARRAY_SIZE(rtl8019_resources),
+ .resource = rtl8019_resources,
+};
+
+/*
+ * NetUSBee: ISP1160 USB host adapter via ROM-port adapter
+ */
+
+#define ATARI_NETUSBEE_PHYS_ADDR 0xfffa8000
+#define ATARI_NETUSBEE_BASE 0x340
+#define ATARI_NETUSBEE_IRQ IRQ_MFP_TIMER2
+
+static struct resource netusbee_resources[] = {
+ [0] = {
+ .name = "isp1160-data",
+ .start = ATARI_NETUSBEE_BASE,
+ .end = ATARI_NETUSBEE_BASE + 0x1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .name = "isp1160-regs",
+ .start = ATARI_NETUSBEE_BASE + 0x20,
+ .end = ATARI_NETUSBEE_BASE + 0x21,
+ .flags = IORESOURCE_MEM,
+ },
+ [2] = {
+ .name = "isp1160-irq",
+ .start = ATARI_NETUSBEE_IRQ,
+ .end = ATARI_NETUSBEE_IRQ,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+/* (DataBusWidth16|AnalogOCEnable|DREQOutputPolarity|DownstreamPort15KRSel ) */
+static struct isp116x_platform_data netusbee_platform_data = {
+ /* Enable internal resistors on downstream ports */
+ .sel15Kres = 1,
+ /* On-chip overcurrent protection */
+ .oc_enable = 1,
+ /* INT output polarity */
+ .int_act_high = 1,
+ /* INT edge or level triggered */
+ .int_edge_triggered = 0,
+
+ /* WAKEUP pin connected - NOT SUPPORTED */
+ /* .remote_wakeup_connected = 0, */
+ /* Wakeup by devices on usb bus enabled */
+ .remote_wakeup_enable = 0,
+ .delay = isp1160_delay,
+};
+
+static struct platform_device netusbee_device = {
+ .name = "isp116x-hcd",
+ .id = 1,
+ .num_resources = ARRAY_SIZE(netusbee_resources),
+ .resource = netusbee_resources,
+ .dev = {
+ .platform_data = &netusbee_platform_data,
+ },
+};
+
+static struct platform_device *atari_netusbee_devices[] __initdata = {
+ &rtl8019_device,
+ &netusbee_device
+};
+#endif /* CONFIG_ATARI_ETHERNEC */
+
+#ifdef CONFIG_ATARI_SCSI
+static const struct resource atari_scsi_st_rsrc[] __initconst = {
+ {
+ .flags = IORESOURCE_IRQ,
+ .start = IRQ_MFP_FSCSI,
+ .end = IRQ_MFP_FSCSI,
+ },
+};
+
+static const struct resource atari_scsi_tt_rsrc[] __initconst = {
+ {
+ .flags = IORESOURCE_IRQ,
+ .start = IRQ_TT_MFP_SCSI,
+ .end = IRQ_TT_MFP_SCSI,
+ },
+};
+#endif
+
+int __init atari_platform_init(void)
+{
+ int rv = 0;
+
+ if (!MACH_IS_ATARI)
+ return -ENODEV;
+
+#ifdef CONFIG_ATARI_ETHERNAT
+ {
+ unsigned char *enatc_virt;
+ enatc_virt = (unsigned char *)ioremap((ATARI_ETHERNAT_PHYS_ADDR+0x23), 0xf);
+ if (hwreg_present(enatc_virt)) {
+ rv = platform_add_devices(atari_ethernat_devices,
+ ARRAY_SIZE(atari_ethernat_devices));
+ }
+ iounmap(enatc_virt);
+ }
+#endif
+
+#ifdef CONFIG_ATARI_ETHERNEC
+ {
+ int error;
+ unsigned char *enec_virt;
+ enec_virt = (unsigned char *)ioremap((ATARI_ETHERNEC_PHYS_ADDR), 0xf);
+ if (hwreg_present(enec_virt)) {
+ error = platform_add_devices(atari_netusbee_devices,
+ ARRAY_SIZE(atari_netusbee_devices));
+ if (error && !rv)
+ rv = error;
+ }
+ iounmap(enec_virt);
+ }
+#endif
+
+#ifdef CONFIG_ATARI_SCSI
+ if (ATARIHW_PRESENT(ST_SCSI))
+ platform_device_register_simple("atari_scsi", -1,
+ atari_scsi_st_rsrc, ARRAY_SIZE(atari_scsi_st_rsrc));
+ else if (ATARIHW_PRESENT(TT_SCSI))
+ platform_device_register_simple("atari_scsi", -1,
+ atari_scsi_tt_rsrc, ARRAY_SIZE(atari_scsi_tt_rsrc));
+#endif
+
+ return rv;
+}
+
+arch_initcall(atari_platform_init);
diff --git a/kernel/arch/m68k/atari/debug.c b/kernel/arch/m68k/atari/debug.c
new file mode 100644
index 000000000..03cb5e08d
--- /dev/null
+++ b/kernel/arch/m68k/atari/debug.c
@@ -0,0 +1,329 @@
+/*
+ * linux/arch/m68k/atari/debug.c
+ *
+ * Atari debugging and serial console stuff
+ *
+ * Assembled of parts of former atari/config.c 97-12-18 by Roman Hodek
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file COPYING in the main directory of this archive
+ * for more details.
+ */
+
+#include <linux/types.h>
+#include <linux/tty.h>
+#include <linux/console.h>
+#include <linux/init.h>
+#include <linux/delay.h>
+#include <linux/module.h>
+
+#include <asm/atarihw.h>
+#include <asm/atariints.h>
+
+/* Can be set somewhere, if a SCC master reset has already be done and should
+ * not be repeated; used by kgdb */
+int atari_SCC_reset_done;
+EXPORT_SYMBOL(atari_SCC_reset_done);
+
+static struct console atari_console_driver = {
+ .name = "debug",
+ .flags = CON_PRINTBUFFER,
+ .index = -1,
+};
+
+
+static inline void ata_mfp_out(char c)
+{
+ while (!(st_mfp.trn_stat & 0x80)) /* wait for tx buf empty */
+ barrier();
+ st_mfp.usart_dta = c;
+}
+
+static void atari_mfp_console_write(struct console *co, const char *str,
+ unsigned int count)
+{
+ while (count--) {
+ if (*str == '\n')
+ ata_mfp_out('\r');
+ ata_mfp_out(*str++);
+ }
+}
+
+static inline void ata_scc_out(char c)
+{
+ do {
+ MFPDELAY();
+ } while (!(atari_scc.cha_b_ctrl & 0x04)); /* wait for tx buf empty */
+ MFPDELAY();
+ atari_scc.cha_b_data = c;
+}
+
+static void atari_scc_console_write(struct console *co, const char *str,
+ unsigned int count)
+{
+ while (count--) {
+ if (*str == '\n')
+ ata_scc_out('\r');
+ ata_scc_out(*str++);
+ }
+}
+
+static inline void ata_midi_out(char c)
+{
+ while (!(acia.mid_ctrl & ACIA_TDRE)) /* wait for tx buf empty */
+ barrier();
+ acia.mid_data = c;
+}
+
+static void atari_midi_console_write(struct console *co, const char *str,
+ unsigned int count)
+{
+ while (count--) {
+ if (*str == '\n')
+ ata_midi_out('\r');
+ ata_midi_out(*str++);
+ }
+}
+
+static int ata_par_out(char c)
+{
+ unsigned char tmp;
+ /* This a some-seconds timeout in case no printer is connected */
+ unsigned long i = loops_per_jiffy > 1 ? loops_per_jiffy : 10000000/HZ;
+
+ while ((st_mfp.par_dt_reg & 1) && --i) /* wait for BUSY == L */
+ ;
+ if (!i)
+ return 0;
+
+ sound_ym.rd_data_reg_sel = 15; /* select port B */
+ sound_ym.wd_data = c; /* put char onto port */
+ sound_ym.rd_data_reg_sel = 14; /* select port A */
+ tmp = sound_ym.rd_data_reg_sel;
+ sound_ym.wd_data = tmp & ~0x20; /* set strobe L */
+ MFPDELAY(); /* wait a bit */
+ sound_ym.wd_data = tmp | 0x20; /* set strobe H */
+ return 1;
+}
+
+static void atari_par_console_write(struct console *co, const char *str,
+ unsigned int count)
+{
+ static int printer_present = 1;
+
+ if (!printer_present)
+ return;
+
+ while (count--) {
+ if (*str == '\n') {
+ if (!ata_par_out('\r')) {
+ printer_present = 0;
+ return;
+ }
+ }
+ if (!ata_par_out(*str++)) {
+ printer_present = 0;
+ return;
+ }
+ }
+}
+
+#if 0
+int atari_mfp_console_wait_key(struct console *co)
+{
+ while (!(st_mfp.rcv_stat & 0x80)) /* wait for rx buf filled */
+ barrier();
+ return st_mfp.usart_dta;
+}
+
+int atari_scc_console_wait_key(struct console *co)
+{
+ do {
+ MFPDELAY();
+ } while (!(atari_scc.cha_b_ctrl & 0x01)); /* wait for rx buf filled */
+ MFPDELAY();
+ return atari_scc.cha_b_data;
+}
+
+int atari_midi_console_wait_key(struct console *co)
+{
+ while (!(acia.mid_ctrl & ACIA_RDRF)) /* wait for rx buf filled */
+ barrier();
+ return acia.mid_data;
+}
+#endif
+
+/*
+ * The following two functions do a quick'n'dirty initialization of the MFP or
+ * SCC serial ports. They're used by the debugging interface, kgdb, and the
+ * serial console code.
+ */
+static void __init atari_init_mfp_port(int cflag)
+{
+ /*
+ * timer values for 1200...115200 bps; > 38400 select 110, 134, or 150
+ * bps, resp., and work only correct if there's a RSVE or RSSPEED
+ */
+ static int baud_table[9] = { 16, 11, 8, 4, 2, 1, 175, 143, 128 };
+ int baud = cflag & CBAUD;
+ int parity = (cflag & PARENB) ? ((cflag & PARODD) ? 0x04 : 0x06) : 0;
+ int csize = ((cflag & CSIZE) == CS7) ? 0x20 : 0x00;
+
+ if (cflag & CBAUDEX)
+ baud += B38400;
+ if (baud < B1200 || baud > B38400+2)
+ baud = B9600; /* use default 9600bps for non-implemented rates */
+ baud -= B1200; /* baud_table[] starts at 1200bps */
+
+ st_mfp.trn_stat &= ~0x01; /* disable TX */
+ st_mfp.usart_ctr = parity | csize | 0x88; /* 1:16 clk mode, 1 stop bit */
+ st_mfp.tim_ct_cd &= 0x70; /* stop timer D */
+ st_mfp.tim_dt_d = baud_table[baud];
+ st_mfp.tim_ct_cd |= 0x01; /* start timer D, 1:4 */
+ st_mfp.trn_stat |= 0x01; /* enable TX */
+}
+
+#define SCC_WRITE(reg, val) \
+ do { \
+ atari_scc.cha_b_ctrl = (reg); \
+ MFPDELAY(); \
+ atari_scc.cha_b_ctrl = (val); \
+ MFPDELAY(); \
+ } while (0)
+
+/* loops_per_jiffy isn't initialized yet, so we can't use udelay(). This does a
+ * delay of ~ 60us. */
+#define LONG_DELAY() \
+ do { \
+ int i; \
+ for (i = 100; i > 0; --i) \
+ MFPDELAY(); \
+ } while (0)
+
+static void __init atari_init_scc_port(int cflag)
+{
+ static int clksrc_table[9] =
+ /* reg 11: 0x50 = BRG, 0x00 = RTxC, 0x28 = TRxC */
+ { 0x50, 0x50, 0x50, 0x50, 0x50, 0x50, 0x50, 0x00, 0x00 };
+ static int brgsrc_table[9] =
+ /* reg 14: 0 = RTxC, 2 = PCLK */
+ { 2, 2, 2, 2, 2, 2, 0, 2, 2 };
+ static int clkmode_table[9] =
+ /* reg 4: 0x40 = x16, 0x80 = x32, 0xc0 = x64 */
+ { 0x40, 0x40, 0x40, 0x40, 0x40, 0x40, 0x40, 0xc0, 0x80 };
+ static int div_table[9] =
+ /* reg12 (BRG low) */
+ { 208, 138, 103, 50, 24, 11, 1, 0, 0 };
+
+ int baud = cflag & CBAUD;
+ int clksrc, clkmode, div, reg3, reg5;
+
+ if (cflag & CBAUDEX)
+ baud += B38400;
+ if (baud < B1200 || baud > B38400+2)
+ baud = B9600; /* use default 9600bps for non-implemented rates */
+ baud -= B1200; /* tables starts at 1200bps */
+
+ clksrc = clksrc_table[baud];
+ clkmode = clkmode_table[baud];
+ div = div_table[baud];
+ if (ATARIHW_PRESENT(TT_MFP) && baud >= 6) {
+ /* special treatment for TT, where rates >= 38400 are done via TRxC */
+ clksrc = 0x28; /* TRxC */
+ clkmode = baud == 6 ? 0xc0 :
+ baud == 7 ? 0x80 : /* really 76800bps */
+ 0x40; /* really 153600bps */
+ div = 0;
+ }
+
+ reg3 = (cflag & CSIZE) == CS8 ? 0xc0 : 0x40;
+ reg5 = (cflag & CSIZE) == CS8 ? 0x60 : 0x20 | 0x82 /* assert DTR/RTS */;
+
+ (void)atari_scc.cha_b_ctrl; /* reset reg pointer */
+ SCC_WRITE(9, 0xc0); /* reset */
+ LONG_DELAY(); /* extra delay after WR9 access */
+ SCC_WRITE(4, (cflag & PARENB) ? ((cflag & PARODD) ? 0x01 : 0x03)
+ : 0 | 0x04 /* 1 stopbit */ | clkmode);
+ SCC_WRITE(3, reg3);
+ SCC_WRITE(5, reg5);
+ SCC_WRITE(9, 0); /* no interrupts */
+ LONG_DELAY(); /* extra delay after WR9 access */
+ SCC_WRITE(10, 0); /* NRZ mode */
+ SCC_WRITE(11, clksrc); /* main clock source */
+ SCC_WRITE(12, div); /* BRG value */
+ SCC_WRITE(13, 0); /* BRG high byte */
+ SCC_WRITE(14, brgsrc_table[baud]);
+ SCC_WRITE(14, brgsrc_table[baud] | (div ? 1 : 0));
+ SCC_WRITE(3, reg3 | 1);
+ SCC_WRITE(5, reg5 | 8);
+
+ atari_SCC_reset_done = 1;
+}
+
+static void __init atari_init_midi_port(int cflag)
+{
+ int baud = cflag & CBAUD;
+ int csize = ((cflag & CSIZE) == CS8) ? 0x10 : 0x00;
+ /* warning 7N1 isn't possible! (instead 7O2 is used...) */
+ int parity = (cflag & PARENB) ? ((cflag & PARODD) ? 0x0c : 0x08) : 0x04;
+ int div;
+
+ /* 4800 selects 7812.5, 115200 selects 500000, all other (incl. 9600 as
+ * default) the standard MIDI speed 31250. */
+ if (cflag & CBAUDEX)
+ baud += B38400;
+ if (baud == B4800)
+ div = ACIA_DIV64; /* really 7812.5 bps */
+ else if (baud == B38400+2 /* 115200 */)
+ div = ACIA_DIV1; /* really 500 kbps (does that work??) */
+ else
+ div = ACIA_DIV16; /* 31250 bps, standard for MIDI */
+
+ /* RTS low, ints disabled */
+ acia.mid_ctrl = div | csize | parity |
+ ((atari_switches & ATARI_SWITCH_MIDI) ?
+ ACIA_RHTID : ACIA_RLTID);
+}
+
+static int __init atari_debug_setup(char *arg)
+{
+ bool registered;
+
+ if (!MACH_IS_ATARI)
+ return 0;
+
+ if (!strcmp(arg, "ser"))
+ /* defaults to ser2 for a Falcon and ser1 otherwise */
+ arg = MACH_IS_FALCON ? "ser2" : "ser1";
+
+ registered = !!atari_console_driver.write;
+ if (!strcmp(arg, "ser1")) {
+ /* ST-MFP Modem1 serial port */
+ atari_init_mfp_port(B9600|CS8);
+ atari_console_driver.write = atari_mfp_console_write;
+ } else if (!strcmp(arg, "ser2")) {
+ /* SCC Modem2 serial port */
+ atari_init_scc_port(B9600|CS8);
+ atari_console_driver.write = atari_scc_console_write;
+ } else if (!strcmp(arg, "midi")) {
+ /* MIDI port */
+ atari_init_midi_port(B9600|CS8);
+ atari_console_driver.write = atari_midi_console_write;
+ } else if (!strcmp(arg, "par")) {
+ /* parallel printer */
+ atari_turnoff_irq(IRQ_MFP_BUSY); /* avoid ints */
+ sound_ym.rd_data_reg_sel = 7; /* select mixer control */
+ sound_ym.wd_data = 0xff; /* sound off, ports are output */
+ sound_ym.rd_data_reg_sel = 15; /* select port B */
+ sound_ym.wd_data = 0; /* no char */
+ sound_ym.rd_data_reg_sel = 14; /* select port A */
+ sound_ym.wd_data = sound_ym.rd_data_reg_sel | 0x20; /* strobe H */
+ atari_console_driver.write = atari_par_console_write;
+ }
+ if (atari_console_driver.write && !registered)
+ register_console(&atari_console_driver);
+
+ return 0;
+}
+
+early_param("debug", atari_debug_setup);
diff --git a/kernel/arch/m68k/atari/stdma.c b/kernel/arch/m68k/atari/stdma.c
new file mode 100644
index 000000000..ba65f942d
--- /dev/null
+++ b/kernel/arch/m68k/atari/stdma.c
@@ -0,0 +1,220 @@
+/*
+ * linux/arch/m68k/atari/stmda.c
+ *
+ * Copyright (C) 1994 Roman Hodek
+ *
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file COPYING in the main directory of this archive
+ * for more details.
+ */
+
+
+/* This file contains some function for controlling the access to the */
+/* ST-DMA chip that may be shared between devices. Currently we have: */
+/* TT: Floppy and ACSI bus */
+/* Falcon: Floppy and SCSI */
+/* */
+/* The controlling functions set up a wait queue for access to the */
+/* ST-DMA chip. Callers to stdma_lock() that cannot granted access are */
+/* put onto a queue and waked up later if the owner calls */
+/* stdma_release(). Additionally, the caller gives his interrupt */
+/* service routine to stdma_lock(). */
+/* */
+/* On the Falcon, the IDE bus uses just the ACSI/Floppy interrupt, but */
+/* not the ST-DMA chip itself. So falhd.c needs not to lock the */
+/* chip. The interrupt is routed to falhd.c if IDE is configured, the */
+/* model is a Falcon and the interrupt was caused by the HD controller */
+/* (can be determined by looking at its status register). */
+
+
+#include <linux/types.h>
+#include <linux/kdev_t.h>
+#include <linux/genhd.h>
+#include <linux/sched.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/wait.h>
+#include <linux/module.h>
+
+#include <asm/atari_stdma.h>
+#include <asm/atariints.h>
+#include <asm/atarihw.h>
+#include <asm/io.h>
+#include <asm/irq.h>
+
+static int stdma_locked; /* the semaphore */
+ /* int func to be called */
+static irq_handler_t stdma_isr;
+static void *stdma_isr_data; /* data passed to isr */
+static DECLARE_WAIT_QUEUE_HEAD(stdma_wait); /* wait queue for ST-DMA */
+
+
+
+
+/***************************** Prototypes *****************************/
+
+static irqreturn_t stdma_int (int irq, void *dummy);
+
+/************************* End of Prototypes **************************/
+
+
+/**
+ * stdma_try_lock - attempt to acquire ST DMA interrupt "lock"
+ * @handler: interrupt handler to use after acquisition
+ *
+ * Returns !0 if lock was acquired; otherwise 0.
+ */
+
+int stdma_try_lock(irq_handler_t handler, void *data)
+{
+ unsigned long flags;
+
+ local_irq_save(flags);
+ if (stdma_locked) {
+ local_irq_restore(flags);
+ return 0;
+ }
+
+ stdma_locked = 1;
+ stdma_isr = handler;
+ stdma_isr_data = data;
+ local_irq_restore(flags);
+ return 1;
+}
+EXPORT_SYMBOL(stdma_try_lock);
+
+
+/*
+ * Function: void stdma_lock( isrfunc isr, void *data )
+ *
+ * Purpose: Tries to get a lock on the ST-DMA chip that is used by more
+ * then one device driver. Waits on stdma_wait until lock is free.
+ * stdma_lock() may not be called from an interrupt! You have to
+ * get the lock in your main routine and release it when your
+ * request is finished.
+ *
+ * Inputs: A interrupt function that is called until the lock is
+ * released.
+ *
+ * Returns: nothing
+ *
+ */
+
+void stdma_lock(irq_handler_t handler, void *data)
+{
+ /* Since the DMA is used for file system purposes, we
+ have to sleep uninterruptible (there may be locked
+ buffers) */
+ wait_event(stdma_wait, stdma_try_lock(handler, data));
+}
+EXPORT_SYMBOL(stdma_lock);
+
+
+/*
+ * Function: void stdma_release( void )
+ *
+ * Purpose: Releases the lock on the ST-DMA chip.
+ *
+ * Inputs: none
+ *
+ * Returns: nothing
+ *
+ */
+
+void stdma_release(void)
+{
+ unsigned long flags;
+
+ local_irq_save(flags);
+
+ stdma_locked = 0;
+ stdma_isr = NULL;
+ stdma_isr_data = NULL;
+ wake_up(&stdma_wait);
+
+ local_irq_restore(flags);
+}
+EXPORT_SYMBOL(stdma_release);
+
+
+/**
+ * stdma_is_locked_by - allow lock holder to check whether it needs to release.
+ * @handler: interrupt handler previously used to acquire lock.
+ *
+ * Returns !0 if locked for the given handler; 0 otherwise.
+ */
+
+int stdma_is_locked_by(irq_handler_t handler)
+{
+ unsigned long flags;
+ int result;
+
+ local_irq_save(flags);
+ result = stdma_locked && (stdma_isr == handler);
+ local_irq_restore(flags);
+
+ return result;
+}
+EXPORT_SYMBOL(stdma_is_locked_by);
+
+
+/*
+ * Function: int stdma_islocked( void )
+ *
+ * Purpose: Check if the ST-DMA is currently locked.
+ * Note: Returned status is only valid if ints are disabled while calling and
+ * as long as they remain disabled.
+ * If called with ints enabled, status can change only from locked to
+ * unlocked, because ints may not lock the ST-DMA.
+ *
+ * Inputs: none
+ *
+ * Returns: != 0 if locked, 0 otherwise
+ *
+ */
+
+int stdma_islocked(void)
+{
+ return stdma_locked;
+}
+EXPORT_SYMBOL(stdma_islocked);
+
+
+/*
+ * Function: void stdma_init( void )
+ *
+ * Purpose: Initialize the ST-DMA chip access controlling.
+ * It sets up the interrupt and its service routine. The int is registered
+ * as slow int, client devices have to live with that (no problem
+ * currently).
+ *
+ * Inputs: none
+ *
+ * Return: nothing
+ *
+ */
+
+void __init stdma_init(void)
+{
+ stdma_isr = NULL;
+ if (request_irq(IRQ_MFP_FDC, stdma_int, IRQF_SHARED,
+ "ST-DMA floppy,ACSI,IDE,Falcon-SCSI", stdma_int))
+ pr_err("Couldn't register ST-DMA interrupt\n");
+}
+
+
+/*
+ * Function: void stdma_int()
+ *
+ * Purpose: The interrupt routine for the ST-DMA. It calls the isr
+ * registered by stdma_lock().
+ *
+ */
+
+static irqreturn_t stdma_int(int irq, void *dummy)
+{
+ if (stdma_isr)
+ (*stdma_isr)(irq, stdma_isr_data);
+ return IRQ_HANDLED;
+}
diff --git a/kernel/arch/m68k/atari/stram.c b/kernel/arch/m68k/atari/stram.c
new file mode 100644
index 000000000..c83d66442
--- /dev/null
+++ b/kernel/arch/m68k/atari/stram.c
@@ -0,0 +1,198 @@
+/*
+ * Functions for ST-RAM allocations
+ *
+ * Copyright 1994-97 Roman Hodek <Roman.Hodek@informatik.uni-erlangen.de>
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file COPYING in the main directory of this archive
+ * for more details.
+ */
+
+#include <linux/types.h>
+#include <linux/kernel.h>
+#include <linux/mm.h>
+#include <linux/kdev_t.h>
+#include <linux/major.h>
+#include <linux/init.h>
+#include <linux/slab.h>
+#include <linux/vmalloc.h>
+#include <linux/pagemap.h>
+#include <linux/bootmem.h>
+#include <linux/mount.h>
+#include <linux/blkdev.h>
+#include <linux/module.h>
+#include <linux/ioport.h>
+
+#include <asm/setup.h>
+#include <asm/machdep.h>
+#include <asm/page.h>
+#include <asm/pgtable.h>
+#include <asm/atarihw.h>
+#include <asm/atari_stram.h>
+#include <asm/io.h>
+
+
+/*
+ * The ST-RAM allocator allocates memory from a pool of reserved ST-RAM of
+ * configurable size, set aside on ST-RAM init.
+ * As long as this pool is not exhausted, allocation of real ST-RAM can be
+ * guaranteed.
+ */
+
+/* set if kernel is in ST-RAM */
+static int kernel_in_stram;
+
+static struct resource stram_pool = {
+ .name = "ST-RAM Pool"
+};
+
+static unsigned long pool_size = 1024*1024;
+
+static unsigned long stram_virt_offset;
+
+static int __init atari_stram_setup(char *arg)
+{
+ if (!MACH_IS_ATARI)
+ return 0;
+
+ pool_size = memparse(arg, NULL);
+ return 0;
+}
+
+early_param("stram_pool", atari_stram_setup);
+
+
+/*
+ * This init function is called very early by atari/config.c
+ * It initializes some internal variables needed for stram_alloc()
+ */
+void __init atari_stram_init(void)
+{
+ int i;
+
+ /*
+ * determine whether kernel code resides in ST-RAM
+ * (then ST-RAM is the first memory block at virtual 0x0)
+ */
+ kernel_in_stram = (m68k_memory[0].addr == 0);
+
+ for (i = 0; i < m68k_num_memory; ++i) {
+ if (m68k_memory[i].addr == 0) {
+ return;
+ }
+ }
+
+ /* Should never come here! (There is always ST-Ram!) */
+ panic("atari_stram_init: no ST-RAM found!");
+}
+
+
+/*
+ * This function is called from setup_arch() to reserve the pages needed for
+ * ST-RAM management, if the kernel resides in ST-RAM.
+ */
+void __init atari_stram_reserve_pages(void *start_mem)
+{
+ if (kernel_in_stram) {
+ pr_debug("atari_stram pool: kernel in ST-RAM, using alloc_bootmem!\n");
+ stram_pool.start = (resource_size_t)alloc_bootmem_low_pages(pool_size);
+ stram_pool.end = stram_pool.start + pool_size - 1;
+ request_resource(&iomem_resource, &stram_pool);
+ stram_virt_offset = 0;
+ pr_debug("atari_stram pool: size = %lu bytes, resource = %pR\n",
+ pool_size, &stram_pool);
+ pr_debug("atari_stram pool: stram_virt_offset = %lx\n",
+ stram_virt_offset);
+ }
+}
+
+
+/*
+ * This function is called as arch initcall to reserve the pages needed for
+ * ST-RAM management, if the kernel does not reside in ST-RAM.
+ */
+int __init atari_stram_map_pages(void)
+{
+ if (!kernel_in_stram) {
+ /*
+ * Skip page 0, as the fhe first 2 KiB are supervisor-only!
+ */
+ pr_debug("atari_stram pool: kernel not in ST-RAM, using ioremap!\n");
+ stram_pool.start = PAGE_SIZE;
+ stram_pool.end = stram_pool.start + pool_size - 1;
+ request_resource(&iomem_resource, &stram_pool);
+ stram_virt_offset = (unsigned long) ioremap(stram_pool.start,
+ resource_size(&stram_pool)) - stram_pool.start;
+ pr_debug("atari_stram pool: size = %lu bytes, resource = %pR\n",
+ pool_size, &stram_pool);
+ pr_debug("atari_stram pool: stram_virt_offset = %lx\n",
+ stram_virt_offset);
+ }
+ return 0;
+}
+arch_initcall(atari_stram_map_pages);
+
+
+void *atari_stram_to_virt(unsigned long phys)
+{
+ return (void *)(phys + stram_virt_offset);
+}
+EXPORT_SYMBOL(atari_stram_to_virt);
+
+
+unsigned long atari_stram_to_phys(void *virt)
+{
+ return (unsigned long)(virt - stram_virt_offset);
+}
+EXPORT_SYMBOL(atari_stram_to_phys);
+
+
+void *atari_stram_alloc(unsigned long size, const char *owner)
+{
+ struct resource *res;
+ int error;
+
+ pr_debug("atari_stram_alloc: allocate %lu bytes\n", size);
+
+ /* round up */
+ size = PAGE_ALIGN(size);
+
+ res = kzalloc(sizeof(struct resource), GFP_KERNEL);
+ if (!res)
+ return NULL;
+
+ res->name = owner;
+ error = allocate_resource(&stram_pool, res, size, 0, UINT_MAX,
+ PAGE_SIZE, NULL, NULL);
+ if (error < 0) {
+ pr_err("atari_stram_alloc: allocate_resource() failed %d!\n",
+ error);
+ kfree(res);
+ return NULL;
+ }
+
+ pr_debug("atari_stram_alloc: returning %pR\n", res);
+ return atari_stram_to_virt(res->start);
+}
+EXPORT_SYMBOL(atari_stram_alloc);
+
+
+void atari_stram_free(void *addr)
+{
+ unsigned long start = atari_stram_to_phys(addr);
+ struct resource *res;
+ unsigned long size;
+
+ res = lookup_resource(&stram_pool, start);
+ if (!res) {
+ pr_err("atari_stram_free: trying to free nonexistent region "
+ "at %p\n", addr);
+ return;
+ }
+
+ size = resource_size(res);
+ pr_debug("atari_stram_free: free %lu bytes at %p\n", size, addr);
+ release_resource(res);
+ kfree(res);
+}
+EXPORT_SYMBOL(atari_stram_free);
diff --git a/kernel/arch/m68k/atari/time.c b/kernel/arch/m68k/atari/time.c
new file mode 100644
index 000000000..c549b4817
--- /dev/null
+++ b/kernel/arch/m68k/atari/time.c
@@ -0,0 +1,356 @@
+/*
+ * linux/arch/m68k/atari/time.c
+ *
+ * Atari time and real time clock stuff
+ *
+ * Assembled of parts of former atari/config.c 97-12-18 by Roman Hodek
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file COPYING in the main directory of this archive
+ * for more details.
+ */
+
+#include <linux/types.h>
+#include <linux/mc146818rtc.h>
+#include <linux/interrupt.h>
+#include <linux/init.h>
+#include <linux/rtc.h>
+#include <linux/bcd.h>
+#include <linux/delay.h>
+#include <linux/export.h>
+
+#include <asm/atariints.h>
+
+DEFINE_SPINLOCK(rtc_lock);
+EXPORT_SYMBOL_GPL(rtc_lock);
+
+void __init
+atari_sched_init(irq_handler_t timer_routine)
+{
+ /* set Timer C data Register */
+ st_mfp.tim_dt_c = INT_TICKS;
+ /* start timer C, div = 1:100 */
+ st_mfp.tim_ct_cd = (st_mfp.tim_ct_cd & 15) | 0x60;
+ /* install interrupt service routine for MFP Timer C */
+ if (request_irq(IRQ_MFP_TIMC, timer_routine, 0, "timer", timer_routine))
+ pr_err("Couldn't register timer interrupt\n");
+}
+
+/* ++andreas: gettimeoffset fixed to check for pending interrupt */
+
+#define TICK_SIZE 10000
+
+/* This is always executed with interrupts disabled. */
+u32 atari_gettimeoffset(void)
+{
+ u32 ticks, offset = 0;
+
+ /* read MFP timer C current value */
+ ticks = st_mfp.tim_dt_c;
+ /* The probability of underflow is less than 2% */
+ if (ticks > INT_TICKS - INT_TICKS / 50)
+ /* Check for pending timer interrupt */
+ if (st_mfp.int_pn_b & (1 << 5))
+ offset = TICK_SIZE;
+
+ ticks = INT_TICKS - ticks;
+ ticks = ticks * 10000L / INT_TICKS;
+
+ return (ticks + offset) * 1000;
+}
+
+
+static void mste_read(struct MSTE_RTC *val)
+{
+#define COPY(v) val->v=(mste_rtc.v & 0xf)
+ do {
+ COPY(sec_ones) ; COPY(sec_tens) ; COPY(min_ones) ;
+ COPY(min_tens) ; COPY(hr_ones) ; COPY(hr_tens) ;
+ COPY(weekday) ; COPY(day_ones) ; COPY(day_tens) ;
+ COPY(mon_ones) ; COPY(mon_tens) ; COPY(year_ones) ;
+ COPY(year_tens) ;
+ /* prevent from reading the clock while it changed */
+ } while (val->sec_ones != (mste_rtc.sec_ones & 0xf));
+#undef COPY
+}
+
+static void mste_write(struct MSTE_RTC *val)
+{
+#define COPY(v) mste_rtc.v=val->v
+ do {
+ COPY(sec_ones) ; COPY(sec_tens) ; COPY(min_ones) ;
+ COPY(min_tens) ; COPY(hr_ones) ; COPY(hr_tens) ;
+ COPY(weekday) ; COPY(day_ones) ; COPY(day_tens) ;
+ COPY(mon_ones) ; COPY(mon_tens) ; COPY(year_ones) ;
+ COPY(year_tens) ;
+ /* prevent from writing the clock while it changed */
+ } while (val->sec_ones != (mste_rtc.sec_ones & 0xf));
+#undef COPY
+}
+
+#define RTC_READ(reg) \
+ ({ unsigned char __val; \
+ (void) atari_writeb(reg,&tt_rtc.regsel); \
+ __val = tt_rtc.data; \
+ __val; \
+ })
+
+#define RTC_WRITE(reg,val) \
+ do { \
+ atari_writeb(reg,&tt_rtc.regsel); \
+ tt_rtc.data = (val); \
+ } while(0)
+
+
+#define HWCLK_POLL_INTERVAL 5
+
+int atari_mste_hwclk( int op, struct rtc_time *t )
+{
+ int hour, year;
+ int hr24=0;
+ struct MSTE_RTC val;
+
+ mste_rtc.mode=(mste_rtc.mode | 1);
+ hr24=mste_rtc.mon_tens & 1;
+ mste_rtc.mode=(mste_rtc.mode & ~1);
+
+ if (op) {
+ /* write: prepare values */
+
+ val.sec_ones = t->tm_sec % 10;
+ val.sec_tens = t->tm_sec / 10;
+ val.min_ones = t->tm_min % 10;
+ val.min_tens = t->tm_min / 10;
+ hour = t->tm_hour;
+ if (!hr24) {
+ if (hour > 11)
+ hour += 20 - 12;
+ if (hour == 0 || hour == 20)
+ hour += 12;
+ }
+ val.hr_ones = hour % 10;
+ val.hr_tens = hour / 10;
+ val.day_ones = t->tm_mday % 10;
+ val.day_tens = t->tm_mday / 10;
+ val.mon_ones = (t->tm_mon+1) % 10;
+ val.mon_tens = (t->tm_mon+1) / 10;
+ year = t->tm_year - 80;
+ val.year_ones = year % 10;
+ val.year_tens = year / 10;
+ val.weekday = t->tm_wday;
+ mste_write(&val);
+ mste_rtc.mode=(mste_rtc.mode | 1);
+ val.year_ones = (year % 4); /* leap year register */
+ mste_rtc.mode=(mste_rtc.mode & ~1);
+ }
+ else {
+ mste_read(&val);
+ t->tm_sec = val.sec_ones + val.sec_tens * 10;
+ t->tm_min = val.min_ones + val.min_tens * 10;
+ hour = val.hr_ones + val.hr_tens * 10;
+ if (!hr24) {
+ if (hour == 12 || hour == 12 + 20)
+ hour -= 12;
+ if (hour >= 20)
+ hour += 12 - 20;
+ }
+ t->tm_hour = hour;
+ t->tm_mday = val.day_ones + val.day_tens * 10;
+ t->tm_mon = val.mon_ones + val.mon_tens * 10 - 1;
+ t->tm_year = val.year_ones + val.year_tens * 10 + 80;
+ t->tm_wday = val.weekday;
+ }
+ return 0;
+}
+
+int atari_tt_hwclk( int op, struct rtc_time *t )
+{
+ int sec=0, min=0, hour=0, day=0, mon=0, year=0, wday=0;
+ unsigned long flags;
+ unsigned char ctrl;
+ int pm = 0;
+
+ ctrl = RTC_READ(RTC_CONTROL); /* control registers are
+ * independent from the UIP */
+
+ if (op) {
+ /* write: prepare values */
+
+ sec = t->tm_sec;
+ min = t->tm_min;
+ hour = t->tm_hour;
+ day = t->tm_mday;
+ mon = t->tm_mon + 1;
+ year = t->tm_year - atari_rtc_year_offset;
+ wday = t->tm_wday + (t->tm_wday >= 0);
+
+ if (!(ctrl & RTC_24H)) {
+ if (hour > 11) {
+ pm = 0x80;
+ if (hour != 12)
+ hour -= 12;
+ }
+ else if (hour == 0)
+ hour = 12;
+ }
+
+ if (!(ctrl & RTC_DM_BINARY)) {
+ sec = bin2bcd(sec);
+ min = bin2bcd(min);
+ hour = bin2bcd(hour);
+ day = bin2bcd(day);
+ mon = bin2bcd(mon);
+ year = bin2bcd(year);
+ if (wday >= 0)
+ wday = bin2bcd(wday);
+ }
+ }
+
+ /* Reading/writing the clock registers is a bit critical due to
+ * the regular update cycle of the RTC. While an update is in
+ * progress, registers 0..9 shouldn't be touched.
+ * The problem is solved like that: If an update is currently in
+ * progress (the UIP bit is set), the process sleeps for a while
+ * (50ms). This really should be enough, since the update cycle
+ * normally needs 2 ms.
+ * If the UIP bit reads as 0, we have at least 244 usecs until the
+ * update starts. This should be enough... But to be sure,
+ * additionally the RTC_SET bit is set to prevent an update cycle.
+ */
+
+ while( RTC_READ(RTC_FREQ_SELECT) & RTC_UIP ) {
+ if (in_atomic() || irqs_disabled())
+ mdelay(1);
+ else
+ schedule_timeout_interruptible(HWCLK_POLL_INTERVAL);
+ }
+
+ local_irq_save(flags);
+ RTC_WRITE( RTC_CONTROL, ctrl | RTC_SET );
+ if (!op) {
+ sec = RTC_READ( RTC_SECONDS );
+ min = RTC_READ( RTC_MINUTES );
+ hour = RTC_READ( RTC_HOURS );
+ day = RTC_READ( RTC_DAY_OF_MONTH );
+ mon = RTC_READ( RTC_MONTH );
+ year = RTC_READ( RTC_YEAR );
+ wday = RTC_READ( RTC_DAY_OF_WEEK );
+ }
+ else {
+ RTC_WRITE( RTC_SECONDS, sec );
+ RTC_WRITE( RTC_MINUTES, min );
+ RTC_WRITE( RTC_HOURS, hour + pm);
+ RTC_WRITE( RTC_DAY_OF_MONTH, day );
+ RTC_WRITE( RTC_MONTH, mon );
+ RTC_WRITE( RTC_YEAR, year );
+ if (wday >= 0) RTC_WRITE( RTC_DAY_OF_WEEK, wday );
+ }
+ RTC_WRITE( RTC_CONTROL, ctrl & ~RTC_SET );
+ local_irq_restore(flags);
+
+ if (!op) {
+ /* read: adjust values */
+
+ if (hour & 0x80) {
+ hour &= ~0x80;
+ pm = 1;
+ }
+
+ if (!(ctrl & RTC_DM_BINARY)) {
+ sec = bcd2bin(sec);
+ min = bcd2bin(min);
+ hour = bcd2bin(hour);
+ day = bcd2bin(day);
+ mon = bcd2bin(mon);
+ year = bcd2bin(year);
+ wday = bcd2bin(wday);
+ }
+
+ if (!(ctrl & RTC_24H)) {
+ if (!pm && hour == 12)
+ hour = 0;
+ else if (pm && hour != 12)
+ hour += 12;
+ }
+
+ t->tm_sec = sec;
+ t->tm_min = min;
+ t->tm_hour = hour;
+ t->tm_mday = day;
+ t->tm_mon = mon - 1;
+ t->tm_year = year + atari_rtc_year_offset;
+ t->tm_wday = wday - 1;
+ }
+
+ return( 0 );
+}
+
+
+int atari_mste_set_clock_mmss (unsigned long nowtime)
+{
+ short real_seconds = nowtime % 60, real_minutes = (nowtime / 60) % 60;
+ struct MSTE_RTC val;
+ unsigned char rtc_minutes;
+
+ mste_read(&val);
+ rtc_minutes= val.min_ones + val.min_tens * 10;
+ if ((rtc_minutes < real_minutes
+ ? real_minutes - rtc_minutes
+ : rtc_minutes - real_minutes) < 30)
+ {
+ val.sec_ones = real_seconds % 10;
+ val.sec_tens = real_seconds / 10;
+ val.min_ones = real_minutes % 10;
+ val.min_tens = real_minutes / 10;
+ mste_write(&val);
+ }
+ else
+ return -1;
+ return 0;
+}
+
+int atari_tt_set_clock_mmss (unsigned long nowtime)
+{
+ int retval = 0;
+ short real_seconds = nowtime % 60, real_minutes = (nowtime / 60) % 60;
+ unsigned char save_control, save_freq_select, rtc_minutes;
+
+ save_control = RTC_READ (RTC_CONTROL); /* tell the clock it's being set */
+ RTC_WRITE (RTC_CONTROL, save_control | RTC_SET);
+
+ save_freq_select = RTC_READ (RTC_FREQ_SELECT); /* stop and reset prescaler */
+ RTC_WRITE (RTC_FREQ_SELECT, save_freq_select | RTC_DIV_RESET2);
+
+ rtc_minutes = RTC_READ (RTC_MINUTES);
+ if (!(save_control & RTC_DM_BINARY))
+ rtc_minutes = bcd2bin(rtc_minutes);
+
+ /* Since we're only adjusting minutes and seconds, don't interfere
+ with hour overflow. This avoids messing with unknown time zones
+ but requires your RTC not to be off by more than 30 minutes. */
+ if ((rtc_minutes < real_minutes
+ ? real_minutes - rtc_minutes
+ : rtc_minutes - real_minutes) < 30)
+ {
+ if (!(save_control & RTC_DM_BINARY))
+ {
+ real_seconds = bin2bcd(real_seconds);
+ real_minutes = bin2bcd(real_minutes);
+ }
+ RTC_WRITE (RTC_SECONDS, real_seconds);
+ RTC_WRITE (RTC_MINUTES, real_minutes);
+ }
+ else
+ retval = -1;
+
+ RTC_WRITE (RTC_FREQ_SELECT, save_freq_select);
+ RTC_WRITE (RTC_CONTROL, save_control);
+ return retval;
+}
+
+/*
+ * Local variables:
+ * c-indent-level: 4
+ * tab-width: 8
+ * End:
+ */