summaryrefslogtreecommitdiffstats
path: root/kernel/arch/ia64/include/asm/sn/bte.h
diff options
context:
space:
mode:
Diffstat (limited to 'kernel/arch/ia64/include/asm/sn/bte.h')
-rw-r--r--kernel/arch/ia64/include/asm/sn/bte.h234
1 files changed, 234 insertions, 0 deletions
diff --git a/kernel/arch/ia64/include/asm/sn/bte.h b/kernel/arch/ia64/include/asm/sn/bte.h
new file mode 100644
index 000000000..cc6c4dbf5
--- /dev/null
+++ b/kernel/arch/ia64/include/asm/sn/bte.h
@@ -0,0 +1,234 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (c) 2000-2007 Silicon Graphics, Inc. All Rights Reserved.
+ */
+
+
+#ifndef _ASM_IA64_SN_BTE_H
+#define _ASM_IA64_SN_BTE_H
+
+#include <linux/timer.h>
+#include <linux/spinlock.h>
+#include <linux/cache.h>
+#include <asm/sn/pda.h>
+#include <asm/sn/types.h>
+#include <asm/sn/shub_mmr.h>
+
+#define IBCT_NOTIFY (0x1UL << 4)
+#define IBCT_ZFIL_MODE (0x1UL << 0)
+
+/* #define BTE_DEBUG */
+/* #define BTE_DEBUG_VERBOSE */
+
+#ifdef BTE_DEBUG
+# define BTE_PRINTK(x) printk x /* Terse */
+# ifdef BTE_DEBUG_VERBOSE
+# define BTE_PRINTKV(x) printk x /* Verbose */
+# else
+# define BTE_PRINTKV(x)
+# endif /* BTE_DEBUG_VERBOSE */
+#else
+# define BTE_PRINTK(x)
+# define BTE_PRINTKV(x)
+#endif /* BTE_DEBUG */
+
+
+/* BTE status register only supports 16 bits for length field */
+#define BTE_LEN_BITS (16)
+#define BTE_LEN_MASK ((1 << BTE_LEN_BITS) - 1)
+#define BTE_MAX_XFER (BTE_LEN_MASK << L1_CACHE_SHIFT)
+
+
+/* Define hardware */
+#define BTES_PER_NODE (is_shub2() ? 4 : 2)
+#define MAX_BTES_PER_NODE 4
+
+#define BTE2OFF_CTRL 0
+#define BTE2OFF_SRC (SH2_BT_ENG_SRC_ADDR_0 - SH2_BT_ENG_CSR_0)
+#define BTE2OFF_DEST (SH2_BT_ENG_DEST_ADDR_0 - SH2_BT_ENG_CSR_0)
+#define BTE2OFF_NOTIFY (SH2_BT_ENG_NOTIF_ADDR_0 - SH2_BT_ENG_CSR_0)
+
+#define BTE_BASE_ADDR(interface) \
+ (is_shub2() ? (interface == 0) ? SH2_BT_ENG_CSR_0 : \
+ (interface == 1) ? SH2_BT_ENG_CSR_1 : \
+ (interface == 2) ? SH2_BT_ENG_CSR_2 : \
+ SH2_BT_ENG_CSR_3 \
+ : (interface == 0) ? IIO_IBLS0 : IIO_IBLS1)
+
+#define BTE_SOURCE_ADDR(base) \
+ (is_shub2() ? base + (BTE2OFF_SRC/8) \
+ : base + (BTEOFF_SRC/8))
+
+#define BTE_DEST_ADDR(base) \
+ (is_shub2() ? base + (BTE2OFF_DEST/8) \
+ : base + (BTEOFF_DEST/8))
+
+#define BTE_CTRL_ADDR(base) \
+ (is_shub2() ? base + (BTE2OFF_CTRL/8) \
+ : base + (BTEOFF_CTRL/8))
+
+#define BTE_NOTIF_ADDR(base) \
+ (is_shub2() ? base + (BTE2OFF_NOTIFY/8) \
+ : base + (BTEOFF_NOTIFY/8))
+
+/* Define hardware modes */
+#define BTE_NOTIFY IBCT_NOTIFY
+#define BTE_NORMAL BTE_NOTIFY
+#define BTE_ZERO_FILL (BTE_NOTIFY | IBCT_ZFIL_MODE)
+/* Use a reserved bit to let the caller specify a wait for any BTE */
+#define BTE_WACQUIRE 0x4000
+/* Use the BTE on the node with the destination memory */
+#define BTE_USE_DEST (BTE_WACQUIRE << 1)
+/* Use any available BTE interface on any node for the transfer */
+#define BTE_USE_ANY (BTE_USE_DEST << 1)
+/* macro to force the IBCT0 value valid */
+#define BTE_VALID_MODE(x) ((x) & (IBCT_NOTIFY | IBCT_ZFIL_MODE))
+
+#define BTE_ACTIVE (IBLS_BUSY | IBLS_ERROR)
+#define BTE_WORD_AVAILABLE (IBLS_BUSY << 1)
+#define BTE_WORD_BUSY (~BTE_WORD_AVAILABLE)
+
+/*
+ * Some macros to simplify reading.
+ * Start with macros to locate the BTE control registers.
+ */
+#define BTE_LNSTAT_LOAD(_bte) \
+ HUB_L(_bte->bte_base_addr)
+#define BTE_LNSTAT_STORE(_bte, _x) \
+ HUB_S(_bte->bte_base_addr, (_x))
+#define BTE_SRC_STORE(_bte, _x) \
+({ \
+ u64 __addr = ((_x) & ~AS_MASK); \
+ if (is_shub2()) \
+ __addr = SH2_TIO_PHYS_TO_DMA(__addr); \
+ HUB_S(_bte->bte_source_addr, __addr); \
+})
+#define BTE_DEST_STORE(_bte, _x) \
+({ \
+ u64 __addr = ((_x) & ~AS_MASK); \
+ if (is_shub2()) \
+ __addr = SH2_TIO_PHYS_TO_DMA(__addr); \
+ HUB_S(_bte->bte_destination_addr, __addr); \
+})
+#define BTE_CTRL_STORE(_bte, _x) \
+ HUB_S(_bte->bte_control_addr, (_x))
+#define BTE_NOTIF_STORE(_bte, _x) \
+({ \
+ u64 __addr = ia64_tpa((_x) & ~AS_MASK); \
+ if (is_shub2()) \
+ __addr = SH2_TIO_PHYS_TO_DMA(__addr); \
+ HUB_S(_bte->bte_notify_addr, __addr); \
+})
+
+#define BTE_START_TRANSFER(_bte, _len, _mode) \
+ is_shub2() ? BTE_CTRL_STORE(_bte, IBLS_BUSY | (_mode << 24) | _len) \
+ : BTE_LNSTAT_STORE(_bte, _len); \
+ BTE_CTRL_STORE(_bte, _mode)
+
+/* Possible results from bte_copy and bte_unaligned_copy */
+/* The following error codes map into the BTE hardware codes
+ * IIO_ICRB_ECODE_* (in shubio.h). The hardware uses
+ * an error code of 0 (IIO_ICRB_ECODE_DERR), but we want zero
+ * to mean BTE_SUCCESS, so add one (BTEFAIL_OFFSET) to the error
+ * codes to give the following error codes.
+ */
+#define BTEFAIL_OFFSET 1
+
+typedef enum {
+ BTE_SUCCESS, /* 0 is success */
+ BTEFAIL_DIR, /* Directory error due to IIO access*/
+ BTEFAIL_POISON, /* poison error on IO access (write to poison page) */
+ BTEFAIL_WERR, /* Write error (ie WINV to a Read only line) */
+ BTEFAIL_ACCESS, /* access error (protection violation) */
+ BTEFAIL_PWERR, /* Partial Write Error */
+ BTEFAIL_PRERR, /* Partial Read Error */
+ BTEFAIL_TOUT, /* CRB Time out */
+ BTEFAIL_XTERR, /* Incoming xtalk pkt had error bit */
+ BTEFAIL_NOTAVAIL, /* BTE not available */
+} bte_result_t;
+
+#define BTEFAIL_SH2_RESP_SHORT 0x1 /* bit 000001 */
+#define BTEFAIL_SH2_RESP_LONG 0x2 /* bit 000010 */
+#define BTEFAIL_SH2_RESP_DSP 0x4 /* bit 000100 */
+#define BTEFAIL_SH2_RESP_ACCESS 0x8 /* bit 001000 */
+#define BTEFAIL_SH2_CRB_TO 0x10 /* bit 010000 */
+#define BTEFAIL_SH2_NACK_LIMIT 0x20 /* bit 100000 */
+#define BTEFAIL_SH2_ALL 0x3F /* bit 111111 */
+
+#define BTE_ERR_BITS 0x3FUL
+#define BTE_ERR_SHIFT 36
+#define BTE_ERR_MASK (BTE_ERR_BITS << BTE_ERR_SHIFT)
+
+#define BTE_ERROR_RETRY(value) \
+ (is_shub2() ? (value != BTEFAIL_SH2_CRB_TO) \
+ : (value != BTEFAIL_TOUT))
+
+/*
+ * On shub1 BTE_ERR_MASK will always be false, so no need for is_shub2()
+ */
+#define BTE_SHUB2_ERROR(_status) \
+ ((_status & BTE_ERR_MASK) \
+ ? (((_status >> BTE_ERR_SHIFT) & BTE_ERR_BITS) | IBLS_ERROR) \
+ : _status)
+
+#define BTE_GET_ERROR_STATUS(_status) \
+ (BTE_SHUB2_ERROR(_status) & ~IBLS_ERROR)
+
+#define BTE_VALID_SH2_ERROR(value) \
+ ((value >= BTEFAIL_SH2_RESP_SHORT) && (value <= BTEFAIL_SH2_ALL))
+
+/*
+ * Structure defining a bte. An instance of this
+ * structure is created in the nodepda for each
+ * bte on that node (as defined by BTES_PER_NODE)
+ * This structure contains everything necessary
+ * to work with a BTE.
+ */
+struct bteinfo_s {
+ volatile u64 notify ____cacheline_aligned;
+ u64 *bte_base_addr ____cacheline_aligned;
+ u64 *bte_source_addr;
+ u64 *bte_destination_addr;
+ u64 *bte_control_addr;
+ u64 *bte_notify_addr;
+ spinlock_t spinlock;
+ cnodeid_t bte_cnode; /* cnode */
+ int bte_error_count; /* Number of errors encountered */
+ int bte_num; /* 0 --> BTE0, 1 --> BTE1 */
+ int cleanup_active; /* Interface is locked for cleanup */
+ volatile bte_result_t bh_error; /* error while processing */
+ volatile u64 *most_rcnt_na;
+ struct bteinfo_s *btes_to_try[MAX_BTES_PER_NODE];
+};
+
+
+/*
+ * Function prototypes (functions defined in bte.c, used elsewhere)
+ */
+extern bte_result_t bte_copy(u64, u64, u64, u64, void *);
+extern bte_result_t bte_unaligned_copy(u64, u64, u64, u64);
+extern void bte_error_handler(unsigned long);
+
+#define bte_zero(dest, len, mode, notification) \
+ bte_copy(0, dest, len, ((mode) | BTE_ZERO_FILL), notification)
+
+/*
+ * The following is the preferred way of calling bte_unaligned_copy
+ * If the copy is fully cache line aligned, then bte_copy is
+ * used instead. Since bte_copy is inlined, this saves a call
+ * stack. NOTE: bte_copy is called synchronously and does block
+ * until the transfer is complete. In order to get the asynch
+ * version of bte_copy, you must perform this check yourself.
+ */
+#define BTE_UNALIGNED_COPY(src, dest, len, mode) \
+ (((len & (L1_CACHE_BYTES - 1)) || \
+ (src & (L1_CACHE_BYTES - 1)) || \
+ (dest & (L1_CACHE_BYTES - 1))) ? \
+ bte_unaligned_copy(src, dest, len, mode) : \
+ bte_copy(src, dest, len, mode, NULL))
+
+
+#endif /* _ASM_IA64_SN_BTE_H */