diff options
Diffstat (limited to 'kernel/arch/ia64/hp')
24 files changed, 5121 insertions, 0 deletions
diff --git a/kernel/arch/ia64/hp/common/Makefile b/kernel/arch/ia64/hp/common/Makefile new file mode 100644 index 000000000..9e179dd06 --- /dev/null +++ b/kernel/arch/ia64/hp/common/Makefile @@ -0,0 +1,11 @@ +# +# ia64/platform/hp/common/Makefile +# +# Copyright (C) 2002 Hewlett Packard +# Copyright (C) Alex Williamson (alex_williamson@hp.com) +# + +obj-y := sba_iommu.o +obj-$(CONFIG_IA64_HP_ZX1_SWIOTLB) += hwsw_iommu.o +obj-$(CONFIG_IA64_GENERIC) += hwsw_iommu.o +obj-$(CONFIG_IA64_HP_AML_NFW) += aml_nfw.o diff --git a/kernel/arch/ia64/hp/common/aml_nfw.c b/kernel/arch/ia64/hp/common/aml_nfw.c new file mode 100644 index 000000000..84715fcbb --- /dev/null +++ b/kernel/arch/ia64/hp/common/aml_nfw.c @@ -0,0 +1,235 @@ +/* + * OpRegion handler to allow AML to call native firmware + * + * (c) Copyright 2007 Hewlett-Packard Development Company, L.P. + * Bjorn Helgaas <bjorn.helgaas@hp.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This driver implements HP Open Source Review Board proposal 1842, + * which was approved on 9/20/2006. + * + * For technical documentation, see the HP SPPA Firmware EAS, Appendix F. + * + * ACPI does not define a mechanism for AML methods to call native firmware + * interfaces such as PAL or SAL. This OpRegion handler adds such a mechanism. + * After the handler is installed, an AML method can call native firmware by + * storing the arguments and firmware entry point to specific offsets in the + * OpRegion. When AML reads the "return value" offset from the OpRegion, this + * handler loads up the arguments, makes the firmware call, and returns the + * result. + */ + +#include <linux/module.h> +#include <linux/acpi.h> +#include <asm/sal.h> + +MODULE_AUTHOR("Bjorn Helgaas <bjorn.helgaas@hp.com>"); +MODULE_LICENSE("GPL"); +MODULE_DESCRIPTION("ACPI opregion handler for native firmware calls"); + +static bool force_register; +module_param_named(force, force_register, bool, 0); +MODULE_PARM_DESC(force, "Install opregion handler even without HPQ5001 device"); + +#define AML_NFW_SPACE 0xA1 + +struct ia64_pdesc { + void *ip; + void *gp; +}; + +/* + * N.B. The layout of this structure is defined in the HP SPPA FW EAS, and + * the member offsets are embedded in AML methods. + */ +struct ia64_nfw_context { + u64 arg[8]; + struct ia64_sal_retval ret; + u64 ip; + u64 gp; + u64 pad[2]; +}; + +static void *virt_map(u64 address) +{ + if (address & (1UL << 63)) + return (void *) (__IA64_UNCACHED_OFFSET | address); + + return __va(address); +} + +static void aml_nfw_execute(struct ia64_nfw_context *c) +{ + struct ia64_pdesc virt_entry; + ia64_sal_handler entry; + + virt_entry.ip = virt_map(c->ip); + virt_entry.gp = virt_map(c->gp); + + entry = (ia64_sal_handler) &virt_entry; + + IA64_FW_CALL(entry, c->ret, + c->arg[0], c->arg[1], c->arg[2], c->arg[3], + c->arg[4], c->arg[5], c->arg[6], c->arg[7]); +} + +static void aml_nfw_read_arg(u8 *offset, u32 bit_width, u64 *value) +{ + switch (bit_width) { + case 8: + *value = *(u8 *)offset; + break; + case 16: + *value = *(u16 *)offset; + break; + case 32: + *value = *(u32 *)offset; + break; + case 64: + *value = *(u64 *)offset; + break; + } +} + +static void aml_nfw_write_arg(u8 *offset, u32 bit_width, u64 *value) +{ + switch (bit_width) { + case 8: + *(u8 *) offset = *value; + break; + case 16: + *(u16 *) offset = *value; + break; + case 32: + *(u32 *) offset = *value; + break; + case 64: + *(u64 *) offset = *value; + break; + } +} + +static acpi_status aml_nfw_handler(u32 function, acpi_physical_address address, + u32 bit_width, u64 *value, void *handler_context, + void *region_context) +{ + struct ia64_nfw_context *context = handler_context; + u8 *offset = (u8 *) context + address; + + if (bit_width != 8 && bit_width != 16 && + bit_width != 32 && bit_width != 64) + return AE_BAD_PARAMETER; + + if (address + (bit_width >> 3) > sizeof(struct ia64_nfw_context)) + return AE_BAD_PARAMETER; + + switch (function) { + case ACPI_READ: + if (address == offsetof(struct ia64_nfw_context, ret)) + aml_nfw_execute(context); + aml_nfw_read_arg(offset, bit_width, value); + break; + case ACPI_WRITE: + aml_nfw_write_arg(offset, bit_width, value); + break; + } + + return AE_OK; +} + +static struct ia64_nfw_context global_context; +static int global_handler_registered; + +static int aml_nfw_add_global_handler(void) +{ + acpi_status status; + + if (global_handler_registered) + return 0; + + status = acpi_install_address_space_handler(ACPI_ROOT_OBJECT, + AML_NFW_SPACE, aml_nfw_handler, NULL, &global_context); + if (ACPI_FAILURE(status)) + return -ENODEV; + + global_handler_registered = 1; + printk(KERN_INFO "Global 0x%02X opregion handler registered\n", + AML_NFW_SPACE); + return 0; +} + +static int aml_nfw_remove_global_handler(void) +{ + acpi_status status; + + if (!global_handler_registered) + return 0; + + status = acpi_remove_address_space_handler(ACPI_ROOT_OBJECT, + AML_NFW_SPACE, aml_nfw_handler); + if (ACPI_FAILURE(status)) + return -ENODEV; + + global_handler_registered = 0; + printk(KERN_INFO "Global 0x%02X opregion handler removed\n", + AML_NFW_SPACE); + return 0; +} + +static int aml_nfw_add(struct acpi_device *device) +{ + /* + * We would normally allocate a new context structure and install + * the address space handler for the specific device we found. + * But the HP-UX implementation shares a single global context + * and always puts the handler at the root, so we'll do the same. + */ + return aml_nfw_add_global_handler(); +} + +static int aml_nfw_remove(struct acpi_device *device) +{ + return aml_nfw_remove_global_handler(); +} + +static const struct acpi_device_id aml_nfw_ids[] = { + {"HPQ5001", 0}, + {"", 0} +}; + +static struct acpi_driver acpi_aml_nfw_driver = { + .name = "native firmware", + .ids = aml_nfw_ids, + .ops = { + .add = aml_nfw_add, + .remove = aml_nfw_remove, + }, +}; + +static int __init aml_nfw_init(void) +{ + int result; + + if (force_register) + aml_nfw_add_global_handler(); + + result = acpi_bus_register_driver(&acpi_aml_nfw_driver); + if (result < 0) { + aml_nfw_remove_global_handler(); + return result; + } + + return 0; +} + +static void __exit aml_nfw_exit(void) +{ + acpi_bus_unregister_driver(&acpi_aml_nfw_driver); + aml_nfw_remove_global_handler(); +} + +module_init(aml_nfw_init); +module_exit(aml_nfw_exit); diff --git a/kernel/arch/ia64/hp/common/hwsw_iommu.c b/kernel/arch/ia64/hp/common/hwsw_iommu.c new file mode 100644 index 000000000..1e4cae5ae --- /dev/null +++ b/kernel/arch/ia64/hp/common/hwsw_iommu.c @@ -0,0 +1,59 @@ +/* + * Copyright (c) 2004 Hewlett-Packard Development Company, L.P. + * Contributed by David Mosberger-Tang <davidm@hpl.hp.com> + * + * This is a pseudo I/O MMU which dispatches to the hardware I/O MMU + * whenever possible. We assume that the hardware I/O MMU requires + * full 32-bit addressability, as is the case, e.g., for HP zx1-based + * systems (there, the I/O MMU window is mapped at 3-4GB). If a + * device doesn't provide full 32-bit addressability, we fall back on + * the sw I/O TLB. This is good enough to let us support broken + * hardware such as soundcards which have a DMA engine that can + * address only 28 bits. + */ + +#include <linux/device.h> +#include <linux/dma-mapping.h> +#include <linux/swiotlb.h> +#include <linux/export.h> +#include <asm/machvec.h> + +extern struct dma_map_ops sba_dma_ops, swiotlb_dma_ops; + +/* swiotlb declarations & definitions: */ +extern int swiotlb_late_init_with_default_size (size_t size); + +/* + * Note: we need to make the determination of whether or not to use + * the sw I/O TLB based purely on the device structure. Anything else + * would be unreliable or would be too intrusive. + */ +static inline int use_swiotlb(struct device *dev) +{ + return dev && dev->dma_mask && + !sba_dma_ops.dma_supported(dev, *dev->dma_mask); +} + +struct dma_map_ops *hwsw_dma_get_ops(struct device *dev) +{ + if (use_swiotlb(dev)) + return &swiotlb_dma_ops; + return &sba_dma_ops; +} +EXPORT_SYMBOL(hwsw_dma_get_ops); + +void __init +hwsw_init (void) +{ + /* default to a smallish 2MB sw I/O TLB */ + if (swiotlb_late_init_with_default_size (2 * (1<<20)) != 0) { +#ifdef CONFIG_IA64_GENERIC + /* Better to have normal DMA than panic */ + printk(KERN_WARNING "%s: Failed to initialize software I/O TLB," + " reverting to hpzx1 platform vector\n", __func__); + machvec_init("hpzx1"); +#else + panic("Unable to initialize software I/O TLB services"); +#endif + } +} diff --git a/kernel/arch/ia64/hp/common/sba_iommu.c b/kernel/arch/ia64/hp/common/sba_iommu.c new file mode 100644 index 000000000..344387a55 --- /dev/null +++ b/kernel/arch/ia64/hp/common/sba_iommu.c @@ -0,0 +1,2241 @@ +/* +** IA64 System Bus Adapter (SBA) I/O MMU manager +** +** (c) Copyright 2002-2005 Alex Williamson +** (c) Copyright 2002-2003 Grant Grundler +** (c) Copyright 2002-2005 Hewlett-Packard Company +** +** Portions (c) 2000 Grant Grundler (from parisc I/O MMU code) +** Portions (c) 1999 Dave S. Miller (from sparc64 I/O MMU code) +** +** This program is free software; you can redistribute it and/or modify +** it under the terms of the GNU General Public License as published by +** the Free Software Foundation; either version 2 of the License, or +** (at your option) any later version. +** +** +** This module initializes the IOC (I/O Controller) found on HP +** McKinley machines and their successors. +** +*/ + +#include <linux/types.h> +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/spinlock.h> +#include <linux/slab.h> +#include <linux/init.h> +#include <linux/mm.h> +#include <linux/string.h> +#include <linux/pci.h> +#include <linux/proc_fs.h> +#include <linux/seq_file.h> +#include <linux/acpi.h> +#include <linux/efi.h> +#include <linux/nodemask.h> +#include <linux/bitops.h> /* hweight64() */ +#include <linux/crash_dump.h> +#include <linux/iommu-helper.h> +#include <linux/dma-mapping.h> +#include <linux/prefetch.h> + +#include <asm/delay.h> /* ia64_get_itc() */ +#include <asm/io.h> +#include <asm/page.h> /* PAGE_OFFSET */ +#include <asm/dma.h> + +#include <asm/acpi-ext.h> + +extern int swiotlb_late_init_with_default_size (size_t size); + +#define PFX "IOC: " + +/* +** Enabling timing search of the pdir resource map. Output in /proc. +** Disabled by default to optimize performance. +*/ +#undef PDIR_SEARCH_TIMING + +/* +** This option allows cards capable of 64bit DMA to bypass the IOMMU. If +** not defined, all DMA will be 32bit and go through the TLB. +** There's potentially a conflict in the bio merge code with us +** advertising an iommu, but then bypassing it. Since I/O MMU bypassing +** appears to give more performance than bio-level virtual merging, we'll +** do the former for now. NOTE: BYPASS_SG also needs to be undef'd to +** completely restrict DMA to the IOMMU. +*/ +#define ALLOW_IOV_BYPASS + +/* +** This option specifically allows/disallows bypassing scatterlists with +** multiple entries. Coalescing these entries can allow better DMA streaming +** and in some cases shows better performance than entirely bypassing the +** IOMMU. Performance increase on the order of 1-2% sequential output/input +** using bonnie++ on a RAID0 MD device (sym2 & mpt). +*/ +#undef ALLOW_IOV_BYPASS_SG + +/* +** If a device prefetches beyond the end of a valid pdir entry, it will cause +** a hard failure, ie. MCA. Version 3.0 and later of the zx1 LBA should +** disconnect on 4k boundaries and prevent such issues. If the device is +** particularly aggressive, this option will keep the entire pdir valid such +** that prefetching will hit a valid address. This could severely impact +** error containment, and is therefore off by default. The page that is +** used for spill-over is poisoned, so that should help debugging somewhat. +*/ +#undef FULL_VALID_PDIR + +#define ENABLE_MARK_CLEAN + +/* +** The number of debug flags is a clue - this code is fragile. NOTE: since +** tightening the use of res_lock the resource bitmap and actual pdir are no +** longer guaranteed to stay in sync. The sanity checking code isn't going to +** like that. +*/ +#undef DEBUG_SBA_INIT +#undef DEBUG_SBA_RUN +#undef DEBUG_SBA_RUN_SG +#undef DEBUG_SBA_RESOURCE +#undef ASSERT_PDIR_SANITY +#undef DEBUG_LARGE_SG_ENTRIES +#undef DEBUG_BYPASS + +#if defined(FULL_VALID_PDIR) && defined(ASSERT_PDIR_SANITY) +#error FULL_VALID_PDIR and ASSERT_PDIR_SANITY are mutually exclusive +#endif + +#define SBA_INLINE __inline__ +/* #define SBA_INLINE */ + +#ifdef DEBUG_SBA_INIT +#define DBG_INIT(x...) printk(x) +#else +#define DBG_INIT(x...) +#endif + +#ifdef DEBUG_SBA_RUN +#define DBG_RUN(x...) printk(x) +#else +#define DBG_RUN(x...) +#endif + +#ifdef DEBUG_SBA_RUN_SG +#define DBG_RUN_SG(x...) printk(x) +#else +#define DBG_RUN_SG(x...) +#endif + + +#ifdef DEBUG_SBA_RESOURCE +#define DBG_RES(x...) printk(x) +#else +#define DBG_RES(x...) +#endif + +#ifdef DEBUG_BYPASS +#define DBG_BYPASS(x...) printk(x) +#else +#define DBG_BYPASS(x...) +#endif + +#ifdef ASSERT_PDIR_SANITY +#define ASSERT(expr) \ + if(!(expr)) { \ + printk( "\n" __FILE__ ":%d: Assertion " #expr " failed!\n",__LINE__); \ + panic(#expr); \ + } +#else +#define ASSERT(expr) +#endif + +/* +** The number of pdir entries to "free" before issuing +** a read to PCOM register to flush out PCOM writes. +** Interacts with allocation granularity (ie 4 or 8 entries +** allocated and free'd/purged at a time might make this +** less interesting). +*/ +#define DELAYED_RESOURCE_CNT 64 + +#define PCI_DEVICE_ID_HP_SX2000_IOC 0x12ec + +#define ZX1_IOC_ID ((PCI_DEVICE_ID_HP_ZX1_IOC << 16) | PCI_VENDOR_ID_HP) +#define ZX2_IOC_ID ((PCI_DEVICE_ID_HP_ZX2_IOC << 16) | PCI_VENDOR_ID_HP) +#define REO_IOC_ID ((PCI_DEVICE_ID_HP_REO_IOC << 16) | PCI_VENDOR_ID_HP) +#define SX1000_IOC_ID ((PCI_DEVICE_ID_HP_SX1000_IOC << 16) | PCI_VENDOR_ID_HP) +#define SX2000_IOC_ID ((PCI_DEVICE_ID_HP_SX2000_IOC << 16) | PCI_VENDOR_ID_HP) + +#define ZX1_IOC_OFFSET 0x1000 /* ACPI reports SBA, we want IOC */ + +#define IOC_FUNC_ID 0x000 +#define IOC_FCLASS 0x008 /* function class, bist, header, rev... */ +#define IOC_IBASE 0x300 /* IO TLB */ +#define IOC_IMASK 0x308 +#define IOC_PCOM 0x310 +#define IOC_TCNFG 0x318 +#define IOC_PDIR_BASE 0x320 + +#define IOC_ROPE0_CFG 0x500 +#define IOC_ROPE_AO 0x10 /* Allow "Relaxed Ordering" */ + + +/* AGP GART driver looks for this */ +#define ZX1_SBA_IOMMU_COOKIE 0x0000badbadc0ffeeUL + +/* +** The zx1 IOC supports 4/8/16/64KB page sizes (see TCNFG register) +** +** Some IOCs (sx1000) can run at the above pages sizes, but are +** really only supported using the IOC at a 4k page size. +** +** iovp_size could only be greater than PAGE_SIZE if we are +** confident the drivers really only touch the next physical +** page iff that driver instance owns it. +*/ +static unsigned long iovp_size; +static unsigned long iovp_shift; +static unsigned long iovp_mask; + +struct ioc { + void __iomem *ioc_hpa; /* I/O MMU base address */ + char *res_map; /* resource map, bit == pdir entry */ + u64 *pdir_base; /* physical base address */ + unsigned long ibase; /* pdir IOV Space base */ + unsigned long imask; /* pdir IOV Space mask */ + + unsigned long *res_hint; /* next avail IOVP - circular search */ + unsigned long dma_mask; + spinlock_t res_lock; /* protects the resource bitmap, but must be held when */ + /* clearing pdir to prevent races with allocations. */ + unsigned int res_bitshift; /* from the RIGHT! */ + unsigned int res_size; /* size of resource map in bytes */ +#ifdef CONFIG_NUMA + unsigned int node; /* node where this IOC lives */ +#endif +#if DELAYED_RESOURCE_CNT > 0 + spinlock_t saved_lock; /* may want to try to get this on a separate cacheline */ + /* than res_lock for bigger systems. */ + int saved_cnt; + struct sba_dma_pair { + dma_addr_t iova; + size_t size; + } saved[DELAYED_RESOURCE_CNT]; +#endif + +#ifdef PDIR_SEARCH_TIMING +#define SBA_SEARCH_SAMPLE 0x100 + unsigned long avg_search[SBA_SEARCH_SAMPLE]; + unsigned long avg_idx; /* current index into avg_search */ +#endif + + /* Stuff we don't need in performance path */ + struct ioc *next; /* list of IOC's in system */ + acpi_handle handle; /* for multiple IOC's */ + const char *name; + unsigned int func_id; + unsigned int rev; /* HW revision of chip */ + u32 iov_size; + unsigned int pdir_size; /* in bytes, determined by IOV Space size */ + struct pci_dev *sac_only_dev; +}; + +static struct ioc *ioc_list, *ioc_found; +static int reserve_sba_gart = 1; + +static SBA_INLINE void sba_mark_invalid(struct ioc *, dma_addr_t, size_t); +static SBA_INLINE void sba_free_range(struct ioc *, dma_addr_t, size_t); + +#define sba_sg_address(sg) sg_virt((sg)) + +#ifdef FULL_VALID_PDIR +static u64 prefetch_spill_page; +#endif + +#ifdef CONFIG_PCI +# define GET_IOC(dev) ((dev_is_pci(dev)) \ + ? ((struct ioc *) PCI_CONTROLLER(to_pci_dev(dev))->iommu) : NULL) +#else +# define GET_IOC(dev) NULL +#endif + +/* +** DMA_CHUNK_SIZE is used by the SCSI mid-layer to break up +** (or rather not merge) DMAs into manageable chunks. +** On parisc, this is more of the software/tuning constraint +** rather than the HW. I/O MMU allocation algorithms can be +** faster with smaller sizes (to some degree). +*/ +#define DMA_CHUNK_SIZE (BITS_PER_LONG*iovp_size) + +#define ROUNDUP(x,y) ((x + ((y)-1)) & ~((y)-1)) + +/************************************ +** SBA register read and write support +** +** BE WARNED: register writes are posted. +** (ie follow writes which must reach HW with a read) +** +*/ +#define READ_REG(addr) __raw_readq(addr) +#define WRITE_REG(val, addr) __raw_writeq(val, addr) + +#ifdef DEBUG_SBA_INIT + +/** + * sba_dump_tlb - debugging only - print IOMMU operating parameters + * @hpa: base address of the IOMMU + * + * Print the size/location of the IO MMU PDIR. + */ +static void +sba_dump_tlb(char *hpa) +{ + DBG_INIT("IO TLB at 0x%p\n", (void *)hpa); + DBG_INIT("IOC_IBASE : %016lx\n", READ_REG(hpa+IOC_IBASE)); + DBG_INIT("IOC_IMASK : %016lx\n", READ_REG(hpa+IOC_IMASK)); + DBG_INIT("IOC_TCNFG : %016lx\n", READ_REG(hpa+IOC_TCNFG)); + DBG_INIT("IOC_PDIR_BASE: %016lx\n", READ_REG(hpa+IOC_PDIR_BASE)); + DBG_INIT("\n"); +} +#endif + + +#ifdef ASSERT_PDIR_SANITY + +/** + * sba_dump_pdir_entry - debugging only - print one IOMMU PDIR entry + * @ioc: IO MMU structure which owns the pdir we are interested in. + * @msg: text to print ont the output line. + * @pide: pdir index. + * + * Print one entry of the IO MMU PDIR in human readable form. + */ +static void +sba_dump_pdir_entry(struct ioc *ioc, char *msg, uint pide) +{ + /* start printing from lowest pde in rval */ + u64 *ptr = &ioc->pdir_base[pide & ~(BITS_PER_LONG - 1)]; + unsigned long *rptr = (unsigned long *) &ioc->res_map[(pide >>3) & -sizeof(unsigned long)]; + uint rcnt; + + printk(KERN_DEBUG "SBA: %s rp %p bit %d rval 0x%lx\n", + msg, rptr, pide & (BITS_PER_LONG - 1), *rptr); + + rcnt = 0; + while (rcnt < BITS_PER_LONG) { + printk(KERN_DEBUG "%s %2d %p %016Lx\n", + (rcnt == (pide & (BITS_PER_LONG - 1))) + ? " -->" : " ", + rcnt, ptr, (unsigned long long) *ptr ); + rcnt++; + ptr++; + } + printk(KERN_DEBUG "%s", msg); +} + + +/** + * sba_check_pdir - debugging only - consistency checker + * @ioc: IO MMU structure which owns the pdir we are interested in. + * @msg: text to print ont the output line. + * + * Verify the resource map and pdir state is consistent + */ +static int +sba_check_pdir(struct ioc *ioc, char *msg) +{ + u64 *rptr_end = (u64 *) &(ioc->res_map[ioc->res_size]); + u64 *rptr = (u64 *) ioc->res_map; /* resource map ptr */ + u64 *pptr = ioc->pdir_base; /* pdir ptr */ + uint pide = 0; + + while (rptr < rptr_end) { + u64 rval; + int rcnt; /* number of bits we might check */ + + rval = *rptr; + rcnt = 64; + + while (rcnt) { + /* Get last byte and highest bit from that */ + u32 pde = ((u32)((*pptr >> (63)) & 0x1)); + if ((rval & 0x1) ^ pde) + { + /* + ** BUMMER! -- res_map != pdir -- + ** Dump rval and matching pdir entries + */ + sba_dump_pdir_entry(ioc, msg, pide); + return(1); + } + rcnt--; + rval >>= 1; /* try the next bit */ + pptr++; + pide++; + } + rptr++; /* look at next word of res_map */ + } + /* It'd be nice if we always got here :^) */ + return 0; +} + + +/** + * sba_dump_sg - debugging only - print Scatter-Gather list + * @ioc: IO MMU structure which owns the pdir we are interested in. + * @startsg: head of the SG list + * @nents: number of entries in SG list + * + * print the SG list so we can verify it's correct by hand. + */ +static void +sba_dump_sg( struct ioc *ioc, struct scatterlist *startsg, int nents) +{ + while (nents-- > 0) { + printk(KERN_DEBUG " %d : DMA %08lx/%05x CPU %p\n", nents, + startsg->dma_address, startsg->dma_length, + sba_sg_address(startsg)); + startsg = sg_next(startsg); + } +} + +static void +sba_check_sg( struct ioc *ioc, struct scatterlist *startsg, int nents) +{ + struct scatterlist *the_sg = startsg; + int the_nents = nents; + + while (the_nents-- > 0) { + if (sba_sg_address(the_sg) == 0x0UL) + sba_dump_sg(NULL, startsg, nents); + the_sg = sg_next(the_sg); + } +} + +#endif /* ASSERT_PDIR_SANITY */ + + + + +/************************************************************** +* +* I/O Pdir Resource Management +* +* Bits set in the resource map are in use. +* Each bit can represent a number of pages. +* LSbs represent lower addresses (IOVA's). +* +***************************************************************/ +#define PAGES_PER_RANGE 1 /* could increase this to 4 or 8 if needed */ + +/* Convert from IOVP to IOVA and vice versa. */ +#define SBA_IOVA(ioc,iovp,offset) ((ioc->ibase) | (iovp) | (offset)) +#define SBA_IOVP(ioc,iova) ((iova) & ~(ioc->ibase)) + +#define PDIR_ENTRY_SIZE sizeof(u64) + +#define PDIR_INDEX(iovp) ((iovp)>>iovp_shift) + +#define RESMAP_MASK(n) ~(~0UL << (n)) +#define RESMAP_IDX_MASK (sizeof(unsigned long) - 1) + + +/** + * For most cases the normal get_order is sufficient, however it limits us + * to PAGE_SIZE being the minimum mapping alignment and TC flush granularity. + * It only incurs about 1 clock cycle to use this one with the static variable + * and makes the code more intuitive. + */ +static SBA_INLINE int +get_iovp_order (unsigned long size) +{ + long double d = size - 1; + long order; + + order = ia64_getf_exp(d); + order = order - iovp_shift - 0xffff + 1; + if (order < 0) + order = 0; + return order; +} + +static unsigned long ptr_to_pide(struct ioc *ioc, unsigned long *res_ptr, + unsigned int bitshiftcnt) +{ + return (((unsigned long)res_ptr - (unsigned long)ioc->res_map) << 3) + + bitshiftcnt; +} + +/** + * sba_search_bitmap - find free space in IO PDIR resource bitmap + * @ioc: IO MMU structure which owns the pdir we are interested in. + * @bits_wanted: number of entries we need. + * @use_hint: use res_hint to indicate where to start looking + * + * Find consecutive free bits in resource bitmap. + * Each bit represents one entry in the IO Pdir. + * Cool perf optimization: search for log2(size) bits at a time. + */ +static SBA_INLINE unsigned long +sba_search_bitmap(struct ioc *ioc, struct device *dev, + unsigned long bits_wanted, int use_hint) +{ + unsigned long *res_ptr; + unsigned long *res_end = (unsigned long *) &(ioc->res_map[ioc->res_size]); + unsigned long flags, pide = ~0UL, tpide; + unsigned long boundary_size; + unsigned long shift; + int ret; + + ASSERT(((unsigned long) ioc->res_hint & (sizeof(unsigned long) - 1UL)) == 0); + ASSERT(res_ptr < res_end); + + boundary_size = (unsigned long long)dma_get_seg_boundary(dev) + 1; + boundary_size = ALIGN(boundary_size, 1ULL << iovp_shift) >> iovp_shift; + + BUG_ON(ioc->ibase & ~iovp_mask); + shift = ioc->ibase >> iovp_shift; + + spin_lock_irqsave(&ioc->res_lock, flags); + + /* Allow caller to force a search through the entire resource space */ + if (likely(use_hint)) { + res_ptr = ioc->res_hint; + } else { + res_ptr = (ulong *)ioc->res_map; + ioc->res_bitshift = 0; + } + + /* + * N.B. REO/Grande defect AR2305 can cause TLB fetch timeouts + * if a TLB entry is purged while in use. sba_mark_invalid() + * purges IOTLB entries in power-of-two sizes, so we also + * allocate IOVA space in power-of-two sizes. + */ + bits_wanted = 1UL << get_iovp_order(bits_wanted << iovp_shift); + + if (likely(bits_wanted == 1)) { + unsigned int bitshiftcnt; + for(; res_ptr < res_end ; res_ptr++) { + if (likely(*res_ptr != ~0UL)) { + bitshiftcnt = ffz(*res_ptr); + *res_ptr |= (1UL << bitshiftcnt); + pide = ptr_to_pide(ioc, res_ptr, bitshiftcnt); + ioc->res_bitshift = bitshiftcnt + bits_wanted; + goto found_it; + } + } + goto not_found; + + } + + if (likely(bits_wanted <= BITS_PER_LONG/2)) { + /* + ** Search the resource bit map on well-aligned values. + ** "o" is the alignment. + ** We need the alignment to invalidate I/O TLB using + ** SBA HW features in the unmap path. + */ + unsigned long o = 1 << get_iovp_order(bits_wanted << iovp_shift); + uint bitshiftcnt = ROUNDUP(ioc->res_bitshift, o); + unsigned long mask, base_mask; + + base_mask = RESMAP_MASK(bits_wanted); + mask = base_mask << bitshiftcnt; + + DBG_RES("%s() o %ld %p", __func__, o, res_ptr); + for(; res_ptr < res_end ; res_ptr++) + { + DBG_RES(" %p %lx %lx\n", res_ptr, mask, *res_ptr); + ASSERT(0 != mask); + for (; mask ; mask <<= o, bitshiftcnt += o) { + tpide = ptr_to_pide(ioc, res_ptr, bitshiftcnt); + ret = iommu_is_span_boundary(tpide, bits_wanted, + shift, + boundary_size); + if ((0 == ((*res_ptr) & mask)) && !ret) { + *res_ptr |= mask; /* mark resources busy! */ + pide = tpide; + ioc->res_bitshift = bitshiftcnt + bits_wanted; + goto found_it; + } + } + + bitshiftcnt = 0; + mask = base_mask; + + } + + } else { + int qwords, bits, i; + unsigned long *end; + + qwords = bits_wanted >> 6; /* /64 */ + bits = bits_wanted - (qwords * BITS_PER_LONG); + + end = res_end - qwords; + + for (; res_ptr < end; res_ptr++) { + tpide = ptr_to_pide(ioc, res_ptr, 0); + ret = iommu_is_span_boundary(tpide, bits_wanted, + shift, boundary_size); + if (ret) + goto next_ptr; + for (i = 0 ; i < qwords ; i++) { + if (res_ptr[i] != 0) + goto next_ptr; + } + if (bits && res_ptr[i] && (__ffs(res_ptr[i]) < bits)) + continue; + + /* Found it, mark it */ + for (i = 0 ; i < qwords ; i++) + res_ptr[i] = ~0UL; + res_ptr[i] |= RESMAP_MASK(bits); + + pide = tpide; + res_ptr += qwords; + ioc->res_bitshift = bits; + goto found_it; +next_ptr: + ; + } + } + +not_found: + prefetch(ioc->res_map); + ioc->res_hint = (unsigned long *) ioc->res_map; + ioc->res_bitshift = 0; + spin_unlock_irqrestore(&ioc->res_lock, flags); + return (pide); + +found_it: + ioc->res_hint = res_ptr; + spin_unlock_irqrestore(&ioc->res_lock, flags); + return (pide); +} + + +/** + * sba_alloc_range - find free bits and mark them in IO PDIR resource bitmap + * @ioc: IO MMU structure which owns the pdir we are interested in. + * @size: number of bytes to create a mapping for + * + * Given a size, find consecutive unmarked and then mark those bits in the + * resource bit map. + */ +static int +sba_alloc_range(struct ioc *ioc, struct device *dev, size_t size) +{ + unsigned int pages_needed = size >> iovp_shift; +#ifdef PDIR_SEARCH_TIMING + unsigned long itc_start; +#endif + unsigned long pide; + + ASSERT(pages_needed); + ASSERT(0 == (size & ~iovp_mask)); + +#ifdef PDIR_SEARCH_TIMING + itc_start = ia64_get_itc(); +#endif + /* + ** "seek and ye shall find"...praying never hurts either... + */ + pide = sba_search_bitmap(ioc, dev, pages_needed, 1); + if (unlikely(pide >= (ioc->res_size << 3))) { + pide = sba_search_bitmap(ioc, dev, pages_needed, 0); + if (unlikely(pide >= (ioc->res_size << 3))) { +#if DELAYED_RESOURCE_CNT > 0 + unsigned long flags; + + /* + ** With delayed resource freeing, we can give this one more shot. We're + ** getting close to being in trouble here, so do what we can to make this + ** one count. + */ + spin_lock_irqsave(&ioc->saved_lock, flags); + if (ioc->saved_cnt > 0) { + struct sba_dma_pair *d; + int cnt = ioc->saved_cnt; + + d = &(ioc->saved[ioc->saved_cnt - 1]); + + spin_lock(&ioc->res_lock); + while (cnt--) { + sba_mark_invalid(ioc, d->iova, d->size); + sba_free_range(ioc, d->iova, d->size); + d--; + } + ioc->saved_cnt = 0; + READ_REG(ioc->ioc_hpa+IOC_PCOM); /* flush purges */ + spin_unlock(&ioc->res_lock); + } + spin_unlock_irqrestore(&ioc->saved_lock, flags); + + pide = sba_search_bitmap(ioc, dev, pages_needed, 0); + if (unlikely(pide >= (ioc->res_size << 3))) { + printk(KERN_WARNING "%s: I/O MMU @ %p is" + "out of mapping resources, %u %u %lx\n", + __func__, ioc->ioc_hpa, ioc->res_size, + pages_needed, dma_get_seg_boundary(dev)); + return -1; + } +#else + printk(KERN_WARNING "%s: I/O MMU @ %p is" + "out of mapping resources, %u %u %lx\n", + __func__, ioc->ioc_hpa, ioc->res_size, + pages_needed, dma_get_seg_boundary(dev)); + return -1; +#endif + } + } + +#ifdef PDIR_SEARCH_TIMING + ioc->avg_search[ioc->avg_idx++] = (ia64_get_itc() - itc_start) / pages_needed; + ioc->avg_idx &= SBA_SEARCH_SAMPLE - 1; +#endif + + prefetchw(&(ioc->pdir_base[pide])); + +#ifdef ASSERT_PDIR_SANITY + /* verify the first enable bit is clear */ + if(0x00 != ((u8 *) ioc->pdir_base)[pide*PDIR_ENTRY_SIZE + 7]) { + sba_dump_pdir_entry(ioc, "sba_search_bitmap() botched it?", pide); + } +#endif + + DBG_RES("%s(%x) %d -> %lx hint %x/%x\n", + __func__, size, pages_needed, pide, + (uint) ((unsigned long) ioc->res_hint - (unsigned long) ioc->res_map), + ioc->res_bitshift ); + + return (pide); +} + + +/** + * sba_free_range - unmark bits in IO PDIR resource bitmap + * @ioc: IO MMU structure which owns the pdir we are interested in. + * @iova: IO virtual address which was previously allocated. + * @size: number of bytes to create a mapping for + * + * clear bits in the ioc's resource map + */ +static SBA_INLINE void +sba_free_range(struct ioc *ioc, dma_addr_t iova, size_t size) +{ + unsigned long iovp = SBA_IOVP(ioc, iova); + unsigned int pide = PDIR_INDEX(iovp); + unsigned int ridx = pide >> 3; /* convert bit to byte address */ + unsigned long *res_ptr = (unsigned long *) &((ioc)->res_map[ridx & ~RESMAP_IDX_MASK]); + int bits_not_wanted = size >> iovp_shift; + unsigned long m; + + /* Round up to power-of-two size: see AR2305 note above */ + bits_not_wanted = 1UL << get_iovp_order(bits_not_wanted << iovp_shift); + for (; bits_not_wanted > 0 ; res_ptr++) { + + if (unlikely(bits_not_wanted > BITS_PER_LONG)) { + + /* these mappings start 64bit aligned */ + *res_ptr = 0UL; + bits_not_wanted -= BITS_PER_LONG; + pide += BITS_PER_LONG; + + } else { + + /* 3-bits "bit" address plus 2 (or 3) bits for "byte" == bit in word */ + m = RESMAP_MASK(bits_not_wanted) << (pide & (BITS_PER_LONG - 1)); + bits_not_wanted = 0; + + DBG_RES("%s( ,%x,%x) %x/%lx %x %p %lx\n", __func__, (uint) iova, size, + bits_not_wanted, m, pide, res_ptr, *res_ptr); + + ASSERT(m != 0); + ASSERT(bits_not_wanted); + ASSERT((*res_ptr & m) == m); /* verify same bits are set */ + *res_ptr &= ~m; + } + } +} + + +/************************************************************** +* +* "Dynamic DMA Mapping" support (aka "Coherent I/O") +* +***************************************************************/ + +/** + * sba_io_pdir_entry - fill in one IO PDIR entry + * @pdir_ptr: pointer to IO PDIR entry + * @vba: Virtual CPU address of buffer to map + * + * SBA Mapping Routine + * + * Given a virtual address (vba, arg1) sba_io_pdir_entry() + * loads the I/O PDIR entry pointed to by pdir_ptr (arg0). + * Each IO Pdir entry consists of 8 bytes as shown below + * (LSB == bit 0): + * + * 63 40 11 7 0 + * +-+---------------------+----------------------------------+----+--------+ + * |V| U | PPN[39:12] | U | FF | + * +-+---------------------+----------------------------------+----+--------+ + * + * V == Valid Bit + * U == Unused + * PPN == Physical Page Number + * + * The physical address fields are filled with the results of virt_to_phys() + * on the vba. + */ + +#if 1 +#define sba_io_pdir_entry(pdir_ptr, vba) *pdir_ptr = ((vba & ~0xE000000000000FFFULL) \ + | 0x8000000000000000ULL) +#else +void SBA_INLINE +sba_io_pdir_entry(u64 *pdir_ptr, unsigned long vba) +{ + *pdir_ptr = ((vba & ~0xE000000000000FFFULL) | 0x80000000000000FFULL); +} +#endif + +#ifdef ENABLE_MARK_CLEAN +/** + * Since DMA is i-cache coherent, any (complete) pages that were written via + * DMA can be marked as "clean" so that lazy_mmu_prot_update() doesn't have to + * flush them when they get mapped into an executable vm-area. + */ +static void +mark_clean (void *addr, size_t size) +{ + unsigned long pg_addr, end; + + pg_addr = PAGE_ALIGN((unsigned long) addr); + end = (unsigned long) addr + size; + while (pg_addr + PAGE_SIZE <= end) { + struct page *page = virt_to_page((void *)pg_addr); + set_bit(PG_arch_1, &page->flags); + pg_addr += PAGE_SIZE; + } +} +#endif + +/** + * sba_mark_invalid - invalidate one or more IO PDIR entries + * @ioc: IO MMU structure which owns the pdir we are interested in. + * @iova: IO Virtual Address mapped earlier + * @byte_cnt: number of bytes this mapping covers. + * + * Marking the IO PDIR entry(ies) as Invalid and invalidate + * corresponding IO TLB entry. The PCOM (Purge Command Register) + * is to purge stale entries in the IO TLB when unmapping entries. + * + * The PCOM register supports purging of multiple pages, with a minium + * of 1 page and a maximum of 2GB. Hardware requires the address be + * aligned to the size of the range being purged. The size of the range + * must be a power of 2. The "Cool perf optimization" in the + * allocation routine helps keep that true. + */ +static SBA_INLINE void +sba_mark_invalid(struct ioc *ioc, dma_addr_t iova, size_t byte_cnt) +{ + u32 iovp = (u32) SBA_IOVP(ioc,iova); + + int off = PDIR_INDEX(iovp); + + /* Must be non-zero and rounded up */ + ASSERT(byte_cnt > 0); + ASSERT(0 == (byte_cnt & ~iovp_mask)); + +#ifdef ASSERT_PDIR_SANITY + /* Assert first pdir entry is set */ + if (!(ioc->pdir_base[off] >> 60)) { + sba_dump_pdir_entry(ioc,"sba_mark_invalid()", PDIR_INDEX(iovp)); + } +#endif + + if (byte_cnt <= iovp_size) + { + ASSERT(off < ioc->pdir_size); + + iovp |= iovp_shift; /* set "size" field for PCOM */ + +#ifndef FULL_VALID_PDIR + /* + ** clear I/O PDIR entry "valid" bit + ** Do NOT clear the rest - save it for debugging. + ** We should only clear bits that have previously + ** been enabled. + */ + ioc->pdir_base[off] &= ~(0x80000000000000FFULL); +#else + /* + ** If we want to maintain the PDIR as valid, put in + ** the spill page so devices prefetching won't + ** cause a hard fail. + */ + ioc->pdir_base[off] = (0x80000000000000FFULL | prefetch_spill_page); +#endif + } else { + u32 t = get_iovp_order(byte_cnt) + iovp_shift; + + iovp |= t; + ASSERT(t <= 31); /* 2GB! Max value of "size" field */ + + do { + /* verify this pdir entry is enabled */ + ASSERT(ioc->pdir_base[off] >> 63); +#ifndef FULL_VALID_PDIR + /* clear I/O Pdir entry "valid" bit first */ + ioc->pdir_base[off] &= ~(0x80000000000000FFULL); +#else + ioc->pdir_base[off] = (0x80000000000000FFULL | prefetch_spill_page); +#endif + off++; + byte_cnt -= iovp_size; + } while (byte_cnt > 0); + } + + WRITE_REG(iovp | ioc->ibase, ioc->ioc_hpa+IOC_PCOM); +} + +/** + * sba_map_single_attrs - map one buffer and return IOVA for DMA + * @dev: instance of PCI owned by the driver that's asking. + * @addr: driver buffer to map. + * @size: number of bytes to map in driver buffer. + * @dir: R/W or both. + * @attrs: optional dma attributes + * + * See Documentation/DMA-API-HOWTO.txt + */ +static dma_addr_t sba_map_page(struct device *dev, struct page *page, + unsigned long poff, size_t size, + enum dma_data_direction dir, + struct dma_attrs *attrs) +{ + struct ioc *ioc; + void *addr = page_address(page) + poff; + dma_addr_t iovp; + dma_addr_t offset; + u64 *pdir_start; + int pide; +#ifdef ASSERT_PDIR_SANITY + unsigned long flags; +#endif +#ifdef ALLOW_IOV_BYPASS + unsigned long pci_addr = virt_to_phys(addr); +#endif + +#ifdef ALLOW_IOV_BYPASS + ASSERT(to_pci_dev(dev)->dma_mask); + /* + ** Check if the PCI device can DMA to ptr... if so, just return ptr + */ + if (likely((pci_addr & ~to_pci_dev(dev)->dma_mask) == 0)) { + /* + ** Device is bit capable of DMA'ing to the buffer... + ** just return the PCI address of ptr + */ + DBG_BYPASS("sba_map_single_attrs() bypass mask/addr: " + "0x%lx/0x%lx\n", + to_pci_dev(dev)->dma_mask, pci_addr); + return pci_addr; + } +#endif + ioc = GET_IOC(dev); + ASSERT(ioc); + + prefetch(ioc->res_hint); + + ASSERT(size > 0); + ASSERT(size <= DMA_CHUNK_SIZE); + + /* save offset bits */ + offset = ((dma_addr_t) (long) addr) & ~iovp_mask; + + /* round up to nearest iovp_size */ + size = (size + offset + ~iovp_mask) & iovp_mask; + +#ifdef ASSERT_PDIR_SANITY + spin_lock_irqsave(&ioc->res_lock, flags); + if (sba_check_pdir(ioc,"Check before sba_map_single_attrs()")) + panic("Sanity check failed"); + spin_unlock_irqrestore(&ioc->res_lock, flags); +#endif + + pide = sba_alloc_range(ioc, dev, size); + if (pide < 0) + return 0; + + iovp = (dma_addr_t) pide << iovp_shift; + + DBG_RUN("%s() 0x%p -> 0x%lx\n", __func__, addr, (long) iovp | offset); + + pdir_start = &(ioc->pdir_base[pide]); + + while (size > 0) { + ASSERT(((u8 *)pdir_start)[7] == 0); /* verify availability */ + sba_io_pdir_entry(pdir_start, (unsigned long) addr); + + DBG_RUN(" pdir 0x%p %lx\n", pdir_start, *pdir_start); + + addr += iovp_size; + size -= iovp_size; + pdir_start++; + } + /* force pdir update */ + wmb(); + + /* form complete address */ +#ifdef ASSERT_PDIR_SANITY + spin_lock_irqsave(&ioc->res_lock, flags); + sba_check_pdir(ioc,"Check after sba_map_single_attrs()"); + spin_unlock_irqrestore(&ioc->res_lock, flags); +#endif + return SBA_IOVA(ioc, iovp, offset); +} + +static dma_addr_t sba_map_single_attrs(struct device *dev, void *addr, + size_t size, enum dma_data_direction dir, + struct dma_attrs *attrs) +{ + return sba_map_page(dev, virt_to_page(addr), + (unsigned long)addr & ~PAGE_MASK, size, dir, attrs); +} + +#ifdef ENABLE_MARK_CLEAN +static SBA_INLINE void +sba_mark_clean(struct ioc *ioc, dma_addr_t iova, size_t size) +{ + u32 iovp = (u32) SBA_IOVP(ioc,iova); + int off = PDIR_INDEX(iovp); + void *addr; + + if (size <= iovp_size) { + addr = phys_to_virt(ioc->pdir_base[off] & + ~0xE000000000000FFFULL); + mark_clean(addr, size); + } else { + do { + addr = phys_to_virt(ioc->pdir_base[off] & + ~0xE000000000000FFFULL); + mark_clean(addr, min(size, iovp_size)); + off++; + size -= iovp_size; + } while (size > 0); + } +} +#endif + +/** + * sba_unmap_single_attrs - unmap one IOVA and free resources + * @dev: instance of PCI owned by the driver that's asking. + * @iova: IOVA of driver buffer previously mapped. + * @size: number of bytes mapped in driver buffer. + * @dir: R/W or both. + * @attrs: optional dma attributes + * + * See Documentation/DMA-API-HOWTO.txt + */ +static void sba_unmap_page(struct device *dev, dma_addr_t iova, size_t size, + enum dma_data_direction dir, struct dma_attrs *attrs) +{ + struct ioc *ioc; +#if DELAYED_RESOURCE_CNT > 0 + struct sba_dma_pair *d; +#endif + unsigned long flags; + dma_addr_t offset; + + ioc = GET_IOC(dev); + ASSERT(ioc); + +#ifdef ALLOW_IOV_BYPASS + if (likely((iova & ioc->imask) != ioc->ibase)) { + /* + ** Address does not fall w/in IOVA, must be bypassing + */ + DBG_BYPASS("sba_unmap_single_attrs() bypass addr: 0x%lx\n", + iova); + +#ifdef ENABLE_MARK_CLEAN + if (dir == DMA_FROM_DEVICE) { + mark_clean(phys_to_virt(iova), size); + } +#endif + return; + } +#endif + offset = iova & ~iovp_mask; + + DBG_RUN("%s() iovp 0x%lx/%x\n", __func__, (long) iova, size); + + iova ^= offset; /* clear offset bits */ + size += offset; + size = ROUNDUP(size, iovp_size); + +#ifdef ENABLE_MARK_CLEAN + if (dir == DMA_FROM_DEVICE) + sba_mark_clean(ioc, iova, size); +#endif + +#if DELAYED_RESOURCE_CNT > 0 + spin_lock_irqsave(&ioc->saved_lock, flags); + d = &(ioc->saved[ioc->saved_cnt]); + d->iova = iova; + d->size = size; + if (unlikely(++(ioc->saved_cnt) >= DELAYED_RESOURCE_CNT)) { + int cnt = ioc->saved_cnt; + spin_lock(&ioc->res_lock); + while (cnt--) { + sba_mark_invalid(ioc, d->iova, d->size); + sba_free_range(ioc, d->iova, d->size); + d--; + } + ioc->saved_cnt = 0; + READ_REG(ioc->ioc_hpa+IOC_PCOM); /* flush purges */ + spin_unlock(&ioc->res_lock); + } + spin_unlock_irqrestore(&ioc->saved_lock, flags); +#else /* DELAYED_RESOURCE_CNT == 0 */ + spin_lock_irqsave(&ioc->res_lock, flags); + sba_mark_invalid(ioc, iova, size); + sba_free_range(ioc, iova, size); + READ_REG(ioc->ioc_hpa+IOC_PCOM); /* flush purges */ + spin_unlock_irqrestore(&ioc->res_lock, flags); +#endif /* DELAYED_RESOURCE_CNT == 0 */ +} + +void sba_unmap_single_attrs(struct device *dev, dma_addr_t iova, size_t size, + enum dma_data_direction dir, struct dma_attrs *attrs) +{ + sba_unmap_page(dev, iova, size, dir, attrs); +} + +/** + * sba_alloc_coherent - allocate/map shared mem for DMA + * @dev: instance of PCI owned by the driver that's asking. + * @size: number of bytes mapped in driver buffer. + * @dma_handle: IOVA of new buffer. + * + * See Documentation/DMA-API-HOWTO.txt + */ +static void * +sba_alloc_coherent(struct device *dev, size_t size, dma_addr_t *dma_handle, + gfp_t flags, struct dma_attrs *attrs) +{ + struct ioc *ioc; + void *addr; + + ioc = GET_IOC(dev); + ASSERT(ioc); + +#ifdef CONFIG_NUMA + { + int node = ioc->node; + struct page *page; + + if (node == NUMA_NO_NODE) + node = numa_node_id(); + + page = alloc_pages_exact_node(node, flags, get_order(size)); + if (unlikely(!page)) + return NULL; + + addr = page_address(page); + } +#else + addr = (void *) __get_free_pages(flags, get_order(size)); +#endif + if (unlikely(!addr)) + return NULL; + + memset(addr, 0, size); + *dma_handle = virt_to_phys(addr); + +#ifdef ALLOW_IOV_BYPASS + ASSERT(dev->coherent_dma_mask); + /* + ** Check if the PCI device can DMA to ptr... if so, just return ptr + */ + if (likely((*dma_handle & ~dev->coherent_dma_mask) == 0)) { + DBG_BYPASS("sba_alloc_coherent() bypass mask/addr: 0x%lx/0x%lx\n", + dev->coherent_dma_mask, *dma_handle); + + return addr; + } +#endif + + /* + * If device can't bypass or bypass is disabled, pass the 32bit fake + * device to map single to get an iova mapping. + */ + *dma_handle = sba_map_single_attrs(&ioc->sac_only_dev->dev, addr, + size, 0, NULL); + + return addr; +} + + +/** + * sba_free_coherent - free/unmap shared mem for DMA + * @dev: instance of PCI owned by the driver that's asking. + * @size: number of bytes mapped in driver buffer. + * @vaddr: virtual address IOVA of "consistent" buffer. + * @dma_handler: IO virtual address of "consistent" buffer. + * + * See Documentation/DMA-API-HOWTO.txt + */ +static void sba_free_coherent(struct device *dev, size_t size, void *vaddr, + dma_addr_t dma_handle, struct dma_attrs *attrs) +{ + sba_unmap_single_attrs(dev, dma_handle, size, 0, NULL); + free_pages((unsigned long) vaddr, get_order(size)); +} + + +/* +** Since 0 is a valid pdir_base index value, can't use that +** to determine if a value is valid or not. Use a flag to indicate +** the SG list entry contains a valid pdir index. +*/ +#define PIDE_FLAG 0x1UL + +#ifdef DEBUG_LARGE_SG_ENTRIES +int dump_run_sg = 0; +#endif + + +/** + * sba_fill_pdir - write allocated SG entries into IO PDIR + * @ioc: IO MMU structure which owns the pdir we are interested in. + * @startsg: list of IOVA/size pairs + * @nents: number of entries in startsg list + * + * Take preprocessed SG list and write corresponding entries + * in the IO PDIR. + */ + +static SBA_INLINE int +sba_fill_pdir( + struct ioc *ioc, + struct scatterlist *startsg, + int nents) +{ + struct scatterlist *dma_sg = startsg; /* pointer to current DMA */ + int n_mappings = 0; + u64 *pdirp = NULL; + unsigned long dma_offset = 0; + + while (nents-- > 0) { + int cnt = startsg->dma_length; + startsg->dma_length = 0; + +#ifdef DEBUG_LARGE_SG_ENTRIES + if (dump_run_sg) + printk(" %2d : %08lx/%05x %p\n", + nents, startsg->dma_address, cnt, + sba_sg_address(startsg)); +#else + DBG_RUN_SG(" %d : %08lx/%05x %p\n", + nents, startsg->dma_address, cnt, + sba_sg_address(startsg)); +#endif + /* + ** Look for the start of a new DMA stream + */ + if (startsg->dma_address & PIDE_FLAG) { + u32 pide = startsg->dma_address & ~PIDE_FLAG; + dma_offset = (unsigned long) pide & ~iovp_mask; + startsg->dma_address = 0; + if (n_mappings) + dma_sg = sg_next(dma_sg); + dma_sg->dma_address = pide | ioc->ibase; + pdirp = &(ioc->pdir_base[pide >> iovp_shift]); + n_mappings++; + } + + /* + ** Look for a VCONTIG chunk + */ + if (cnt) { + unsigned long vaddr = (unsigned long) sba_sg_address(startsg); + ASSERT(pdirp); + + /* Since multiple Vcontig blocks could make up + ** one DMA stream, *add* cnt to dma_len. + */ + dma_sg->dma_length += cnt; + cnt += dma_offset; + dma_offset=0; /* only want offset on first chunk */ + cnt = ROUNDUP(cnt, iovp_size); + do { + sba_io_pdir_entry(pdirp, vaddr); + vaddr += iovp_size; + cnt -= iovp_size; + pdirp++; + } while (cnt > 0); + } + startsg = sg_next(startsg); + } + /* force pdir update */ + wmb(); + +#ifdef DEBUG_LARGE_SG_ENTRIES + dump_run_sg = 0; +#endif + return(n_mappings); +} + + +/* +** Two address ranges are DMA contiguous *iff* "end of prev" and +** "start of next" are both on an IOV page boundary. +** +** (shift left is a quick trick to mask off upper bits) +*/ +#define DMA_CONTIG(__X, __Y) \ + (((((unsigned long) __X) | ((unsigned long) __Y)) << (BITS_PER_LONG - iovp_shift)) == 0UL) + + +/** + * sba_coalesce_chunks - preprocess the SG list + * @ioc: IO MMU structure which owns the pdir we are interested in. + * @startsg: list of IOVA/size pairs + * @nents: number of entries in startsg list + * + * First pass is to walk the SG list and determine where the breaks are + * in the DMA stream. Allocates PDIR entries but does not fill them. + * Returns the number of DMA chunks. + * + * Doing the fill separate from the coalescing/allocation keeps the + * code simpler. Future enhancement could make one pass through + * the sglist do both. + */ +static SBA_INLINE int +sba_coalesce_chunks(struct ioc *ioc, struct device *dev, + struct scatterlist *startsg, + int nents) +{ + struct scatterlist *vcontig_sg; /* VCONTIG chunk head */ + unsigned long vcontig_len; /* len of VCONTIG chunk */ + unsigned long vcontig_end; + struct scatterlist *dma_sg; /* next DMA stream head */ + unsigned long dma_offset, dma_len; /* start/len of DMA stream */ + int n_mappings = 0; + unsigned int max_seg_size = dma_get_max_seg_size(dev); + int idx; + + while (nents > 0) { + unsigned long vaddr = (unsigned long) sba_sg_address(startsg); + + /* + ** Prepare for first/next DMA stream + */ + dma_sg = vcontig_sg = startsg; + dma_len = vcontig_len = vcontig_end = startsg->length; + vcontig_end += vaddr; + dma_offset = vaddr & ~iovp_mask; + + /* PARANOID: clear entries */ + startsg->dma_address = startsg->dma_length = 0; + + /* + ** This loop terminates one iteration "early" since + ** it's always looking one "ahead". + */ + while (--nents > 0) { + unsigned long vaddr; /* tmp */ + + startsg = sg_next(startsg); + + /* PARANOID */ + startsg->dma_address = startsg->dma_length = 0; + + /* catch brokenness in SCSI layer */ + ASSERT(startsg->length <= DMA_CHUNK_SIZE); + + /* + ** First make sure current dma stream won't + ** exceed DMA_CHUNK_SIZE if we coalesce the + ** next entry. + */ + if (((dma_len + dma_offset + startsg->length + ~iovp_mask) & iovp_mask) + > DMA_CHUNK_SIZE) + break; + + if (dma_len + startsg->length > max_seg_size) + break; + + /* + ** Then look for virtually contiguous blocks. + ** + ** append the next transaction? + */ + vaddr = (unsigned long) sba_sg_address(startsg); + if (vcontig_end == vaddr) + { + vcontig_len += startsg->length; + vcontig_end += startsg->length; + dma_len += startsg->length; + continue; + } + +#ifdef DEBUG_LARGE_SG_ENTRIES + dump_run_sg = (vcontig_len > iovp_size); +#endif + + /* + ** Not virtually contiguous. + ** Terminate prev chunk. + ** Start a new chunk. + ** + ** Once we start a new VCONTIG chunk, dma_offset + ** can't change. And we need the offset from the first + ** chunk - not the last one. Ergo Successive chunks + ** must start on page boundaries and dove tail + ** with it's predecessor. + */ + vcontig_sg->dma_length = vcontig_len; + + vcontig_sg = startsg; + vcontig_len = startsg->length; + + /* + ** 3) do the entries end/start on page boundaries? + ** Don't update vcontig_end until we've checked. + */ + if (DMA_CONTIG(vcontig_end, vaddr)) + { + vcontig_end = vcontig_len + vaddr; + dma_len += vcontig_len; + continue; + } else { + break; + } + } + + /* + ** End of DMA Stream + ** Terminate last VCONTIG block. + ** Allocate space for DMA stream. + */ + vcontig_sg->dma_length = vcontig_len; + dma_len = (dma_len + dma_offset + ~iovp_mask) & iovp_mask; + ASSERT(dma_len <= DMA_CHUNK_SIZE); + idx = sba_alloc_range(ioc, dev, dma_len); + if (idx < 0) { + dma_sg->dma_length = 0; + return -1; + } + dma_sg->dma_address = (dma_addr_t)(PIDE_FLAG | (idx << iovp_shift) + | dma_offset); + n_mappings++; + } + + return n_mappings; +} + +static void sba_unmap_sg_attrs(struct device *dev, struct scatterlist *sglist, + int nents, enum dma_data_direction dir, + struct dma_attrs *attrs); +/** + * sba_map_sg - map Scatter/Gather list + * @dev: instance of PCI owned by the driver that's asking. + * @sglist: array of buffer/length pairs + * @nents: number of entries in list + * @dir: R/W or both. + * @attrs: optional dma attributes + * + * See Documentation/DMA-API-HOWTO.txt + */ +static int sba_map_sg_attrs(struct device *dev, struct scatterlist *sglist, + int nents, enum dma_data_direction dir, + struct dma_attrs *attrs) +{ + struct ioc *ioc; + int coalesced, filled = 0; +#ifdef ASSERT_PDIR_SANITY + unsigned long flags; +#endif +#ifdef ALLOW_IOV_BYPASS_SG + struct scatterlist *sg; +#endif + + DBG_RUN_SG("%s() START %d entries\n", __func__, nents); + ioc = GET_IOC(dev); + ASSERT(ioc); + +#ifdef ALLOW_IOV_BYPASS_SG + ASSERT(to_pci_dev(dev)->dma_mask); + if (likely((ioc->dma_mask & ~to_pci_dev(dev)->dma_mask) == 0)) { + for_each_sg(sglist, sg, nents, filled) { + sg->dma_length = sg->length; + sg->dma_address = virt_to_phys(sba_sg_address(sg)); + } + return filled; + } +#endif + /* Fast path single entry scatterlists. */ + if (nents == 1) { + sglist->dma_length = sglist->length; + sglist->dma_address = sba_map_single_attrs(dev, sba_sg_address(sglist), sglist->length, dir, attrs); + return 1; + } + +#ifdef ASSERT_PDIR_SANITY + spin_lock_irqsave(&ioc->res_lock, flags); + if (sba_check_pdir(ioc,"Check before sba_map_sg_attrs()")) + { + sba_dump_sg(ioc, sglist, nents); + panic("Check before sba_map_sg_attrs()"); + } + spin_unlock_irqrestore(&ioc->res_lock, flags); +#endif + + prefetch(ioc->res_hint); + + /* + ** First coalesce the chunks and allocate I/O pdir space + ** + ** If this is one DMA stream, we can properly map using the + ** correct virtual address associated with each DMA page. + ** w/o this association, we wouldn't have coherent DMA! + ** Access to the virtual address is what forces a two pass algorithm. + */ + coalesced = sba_coalesce_chunks(ioc, dev, sglist, nents); + if (coalesced < 0) { + sba_unmap_sg_attrs(dev, sglist, nents, dir, attrs); + return 0; + } + + /* + ** Program the I/O Pdir + ** + ** map the virtual addresses to the I/O Pdir + ** o dma_address will contain the pdir index + ** o dma_len will contain the number of bytes to map + ** o address contains the virtual address. + */ + filled = sba_fill_pdir(ioc, sglist, nents); + +#ifdef ASSERT_PDIR_SANITY + spin_lock_irqsave(&ioc->res_lock, flags); + if (sba_check_pdir(ioc,"Check after sba_map_sg_attrs()")) + { + sba_dump_sg(ioc, sglist, nents); + panic("Check after sba_map_sg_attrs()\n"); + } + spin_unlock_irqrestore(&ioc->res_lock, flags); +#endif + + ASSERT(coalesced == filled); + DBG_RUN_SG("%s() DONE %d mappings\n", __func__, filled); + + return filled; +} + +/** + * sba_unmap_sg_attrs - unmap Scatter/Gather list + * @dev: instance of PCI owned by the driver that's asking. + * @sglist: array of buffer/length pairs + * @nents: number of entries in list + * @dir: R/W or both. + * @attrs: optional dma attributes + * + * See Documentation/DMA-API-HOWTO.txt + */ +static void sba_unmap_sg_attrs(struct device *dev, struct scatterlist *sglist, + int nents, enum dma_data_direction dir, + struct dma_attrs *attrs) +{ +#ifdef ASSERT_PDIR_SANITY + struct ioc *ioc; + unsigned long flags; +#endif + + DBG_RUN_SG("%s() START %d entries, %p,%x\n", + __func__, nents, sba_sg_address(sglist), sglist->length); + +#ifdef ASSERT_PDIR_SANITY + ioc = GET_IOC(dev); + ASSERT(ioc); + + spin_lock_irqsave(&ioc->res_lock, flags); + sba_check_pdir(ioc,"Check before sba_unmap_sg_attrs()"); + spin_unlock_irqrestore(&ioc->res_lock, flags); +#endif + + while (nents && sglist->dma_length) { + + sba_unmap_single_attrs(dev, sglist->dma_address, + sglist->dma_length, dir, attrs); + sglist = sg_next(sglist); + nents--; + } + + DBG_RUN_SG("%s() DONE (nents %d)\n", __func__, nents); + +#ifdef ASSERT_PDIR_SANITY + spin_lock_irqsave(&ioc->res_lock, flags); + sba_check_pdir(ioc,"Check after sba_unmap_sg_attrs()"); + spin_unlock_irqrestore(&ioc->res_lock, flags); +#endif + +} + +/************************************************************** +* +* Initialization and claim +* +***************************************************************/ + +static void +ioc_iova_init(struct ioc *ioc) +{ + int tcnfg; + int agp_found = 0; + struct pci_dev *device = NULL; +#ifdef FULL_VALID_PDIR + unsigned long index; +#endif + + /* + ** Firmware programs the base and size of a "safe IOVA space" + ** (one that doesn't overlap memory or LMMIO space) in the + ** IBASE and IMASK registers. + */ + ioc->ibase = READ_REG(ioc->ioc_hpa + IOC_IBASE) & ~0x1UL; + ioc->imask = READ_REG(ioc->ioc_hpa + IOC_IMASK) | 0xFFFFFFFF00000000UL; + + ioc->iov_size = ~ioc->imask + 1; + + DBG_INIT("%s() hpa %p IOV base 0x%lx mask 0x%lx (%dMB)\n", + __func__, ioc->ioc_hpa, ioc->ibase, ioc->imask, + ioc->iov_size >> 20); + + switch (iovp_size) { + case 4*1024: tcnfg = 0; break; + case 8*1024: tcnfg = 1; break; + case 16*1024: tcnfg = 2; break; + case 64*1024: tcnfg = 3; break; + default: + panic(PFX "Unsupported IOTLB page size %ldK", + iovp_size >> 10); + break; + } + WRITE_REG(tcnfg, ioc->ioc_hpa + IOC_TCNFG); + + ioc->pdir_size = (ioc->iov_size / iovp_size) * PDIR_ENTRY_SIZE; + ioc->pdir_base = (void *) __get_free_pages(GFP_KERNEL, + get_order(ioc->pdir_size)); + if (!ioc->pdir_base) + panic(PFX "Couldn't allocate I/O Page Table\n"); + + memset(ioc->pdir_base, 0, ioc->pdir_size); + + DBG_INIT("%s() IOV page size %ldK pdir %p size %x\n", __func__, + iovp_size >> 10, ioc->pdir_base, ioc->pdir_size); + + ASSERT(ALIGN((unsigned long) ioc->pdir_base, 4*1024) == (unsigned long) ioc->pdir_base); + WRITE_REG(virt_to_phys(ioc->pdir_base), ioc->ioc_hpa + IOC_PDIR_BASE); + + /* + ** If an AGP device is present, only use half of the IOV space + ** for PCI DMA. Unfortunately we can't know ahead of time + ** whether GART support will actually be used, for now we + ** can just key on an AGP device found in the system. + ** We program the next pdir index after we stop w/ a key for + ** the GART code to handshake on. + */ + for_each_pci_dev(device) + agp_found |= pci_find_capability(device, PCI_CAP_ID_AGP); + + if (agp_found && reserve_sba_gart) { + printk(KERN_INFO PFX "reserving %dMb of IOVA space at 0x%lx for agpgart\n", + ioc->iov_size/2 >> 20, ioc->ibase + ioc->iov_size/2); + ioc->pdir_size /= 2; + ((u64 *)ioc->pdir_base)[PDIR_INDEX(ioc->iov_size/2)] = ZX1_SBA_IOMMU_COOKIE; + } +#ifdef FULL_VALID_PDIR + /* + ** Check to see if the spill page has been allocated, we don't need more than + ** one across multiple SBAs. + */ + if (!prefetch_spill_page) { + char *spill_poison = "SBAIOMMU POISON"; + int poison_size = 16; + void *poison_addr, *addr; + + addr = (void *)__get_free_pages(GFP_KERNEL, get_order(iovp_size)); + if (!addr) + panic(PFX "Couldn't allocate PDIR spill page\n"); + + poison_addr = addr; + for ( ; (u64) poison_addr < addr + iovp_size; poison_addr += poison_size) + memcpy(poison_addr, spill_poison, poison_size); + + prefetch_spill_page = virt_to_phys(addr); + + DBG_INIT("%s() prefetch spill addr: 0x%lx\n", __func__, prefetch_spill_page); + } + /* + ** Set all the PDIR entries valid w/ the spill page as the target + */ + for (index = 0 ; index < (ioc->pdir_size / PDIR_ENTRY_SIZE) ; index++) + ((u64 *)ioc->pdir_base)[index] = (0x80000000000000FF | prefetch_spill_page); +#endif + + /* Clear I/O TLB of any possible entries */ + WRITE_REG(ioc->ibase | (get_iovp_order(ioc->iov_size) + iovp_shift), ioc->ioc_hpa + IOC_PCOM); + READ_REG(ioc->ioc_hpa + IOC_PCOM); + + /* Enable IOVA translation */ + WRITE_REG(ioc->ibase | 1, ioc->ioc_hpa + IOC_IBASE); + READ_REG(ioc->ioc_hpa + IOC_IBASE); +} + +static void __init +ioc_resource_init(struct ioc *ioc) +{ + spin_lock_init(&ioc->res_lock); +#if DELAYED_RESOURCE_CNT > 0 + spin_lock_init(&ioc->saved_lock); +#endif + + /* resource map size dictated by pdir_size */ + ioc->res_size = ioc->pdir_size / PDIR_ENTRY_SIZE; /* entries */ + ioc->res_size >>= 3; /* convert bit count to byte count */ + DBG_INIT("%s() res_size 0x%x\n", __func__, ioc->res_size); + + ioc->res_map = (char *) __get_free_pages(GFP_KERNEL, + get_order(ioc->res_size)); + if (!ioc->res_map) + panic(PFX "Couldn't allocate resource map\n"); + + memset(ioc->res_map, 0, ioc->res_size); + /* next available IOVP - circular search */ + ioc->res_hint = (unsigned long *) ioc->res_map; + +#ifdef ASSERT_PDIR_SANITY + /* Mark first bit busy - ie no IOVA 0 */ + ioc->res_map[0] = 0x1; + ioc->pdir_base[0] = 0x8000000000000000ULL | ZX1_SBA_IOMMU_COOKIE; +#endif +#ifdef FULL_VALID_PDIR + /* Mark the last resource used so we don't prefetch beyond IOVA space */ + ioc->res_map[ioc->res_size - 1] |= 0x80UL; /* res_map is chars */ + ioc->pdir_base[(ioc->pdir_size / PDIR_ENTRY_SIZE) - 1] = (0x80000000000000FF + | prefetch_spill_page); +#endif + + DBG_INIT("%s() res_map %x %p\n", __func__, + ioc->res_size, (void *) ioc->res_map); +} + +static void __init +ioc_sac_init(struct ioc *ioc) +{ + struct pci_dev *sac = NULL; + struct pci_controller *controller = NULL; + + /* + * pci_alloc_coherent() must return a DMA address which is + * SAC (single address cycle) addressable, so allocate a + * pseudo-device to enforce that. + */ + sac = kzalloc(sizeof(*sac), GFP_KERNEL); + if (!sac) + panic(PFX "Couldn't allocate struct pci_dev"); + + controller = kzalloc(sizeof(*controller), GFP_KERNEL); + if (!controller) + panic(PFX "Couldn't allocate struct pci_controller"); + + controller->iommu = ioc; + sac->sysdata = controller; + sac->dma_mask = 0xFFFFFFFFUL; +#ifdef CONFIG_PCI + sac->dev.bus = &pci_bus_type; +#endif + ioc->sac_only_dev = sac; +} + +static void __init +ioc_zx1_init(struct ioc *ioc) +{ + unsigned long rope_config; + unsigned int i; + + if (ioc->rev < 0x20) + panic(PFX "IOC 2.0 or later required for IOMMU support\n"); + + /* 38 bit memory controller + extra bit for range displaced by MMIO */ + ioc->dma_mask = (0x1UL << 39) - 1; + + /* + ** Clear ROPE(N)_CONFIG AO bit. + ** Disables "NT Ordering" (~= !"Relaxed Ordering") + ** Overrides bit 1 in DMA Hint Sets. + ** Improves netperf UDP_STREAM by ~10% for tg3 on bcm5701. + */ + for (i=0; i<(8*8); i+=8) { + rope_config = READ_REG(ioc->ioc_hpa + IOC_ROPE0_CFG + i); + rope_config &= ~IOC_ROPE_AO; + WRITE_REG(rope_config, ioc->ioc_hpa + IOC_ROPE0_CFG + i); + } +} + +typedef void (initfunc)(struct ioc *); + +struct ioc_iommu { + u32 func_id; + char *name; + initfunc *init; +}; + +static struct ioc_iommu ioc_iommu_info[] __initdata = { + { ZX1_IOC_ID, "zx1", ioc_zx1_init }, + { ZX2_IOC_ID, "zx2", NULL }, + { SX1000_IOC_ID, "sx1000", NULL }, + { SX2000_IOC_ID, "sx2000", NULL }, +}; + +static void ioc_init(unsigned long hpa, struct ioc *ioc) +{ + struct ioc_iommu *info; + + ioc->next = ioc_list; + ioc_list = ioc; + + ioc->ioc_hpa = ioremap(hpa, 0x1000); + + ioc->func_id = READ_REG(ioc->ioc_hpa + IOC_FUNC_ID); + ioc->rev = READ_REG(ioc->ioc_hpa + IOC_FCLASS) & 0xFFUL; + ioc->dma_mask = 0xFFFFFFFFFFFFFFFFUL; /* conservative */ + + for (info = ioc_iommu_info; info < ioc_iommu_info + ARRAY_SIZE(ioc_iommu_info); info++) { + if (ioc->func_id == info->func_id) { + ioc->name = info->name; + if (info->init) + (info->init)(ioc); + } + } + + iovp_size = (1 << iovp_shift); + iovp_mask = ~(iovp_size - 1); + + DBG_INIT("%s: PAGE_SIZE %ldK, iovp_size %ldK\n", __func__, + PAGE_SIZE >> 10, iovp_size >> 10); + + if (!ioc->name) { + ioc->name = kmalloc(24, GFP_KERNEL); + if (ioc->name) + sprintf((char *) ioc->name, "Unknown (%04x:%04x)", + ioc->func_id & 0xFFFF, (ioc->func_id >> 16) & 0xFFFF); + else + ioc->name = "Unknown"; + } + + ioc_iova_init(ioc); + ioc_resource_init(ioc); + ioc_sac_init(ioc); + + if ((long) ~iovp_mask > (long) ia64_max_iommu_merge_mask) + ia64_max_iommu_merge_mask = ~iovp_mask; + + printk(KERN_INFO PFX + "%s %d.%d HPA 0x%lx IOVA space %dMb at 0x%lx\n", + ioc->name, (ioc->rev >> 4) & 0xF, ioc->rev & 0xF, + hpa, ioc->iov_size >> 20, ioc->ibase); +} + + + +/************************************************************************** +** +** SBA initialization code (HW and SW) +** +** o identify SBA chip itself +** o FIXME: initialize DMA hints for reasonable defaults +** +**************************************************************************/ + +#ifdef CONFIG_PROC_FS +static void * +ioc_start(struct seq_file *s, loff_t *pos) +{ + struct ioc *ioc; + loff_t n = *pos; + + for (ioc = ioc_list; ioc; ioc = ioc->next) + if (!n--) + return ioc; + + return NULL; +} + +static void * +ioc_next(struct seq_file *s, void *v, loff_t *pos) +{ + struct ioc *ioc = v; + + ++*pos; + return ioc->next; +} + +static void +ioc_stop(struct seq_file *s, void *v) +{ +} + +static int +ioc_show(struct seq_file *s, void *v) +{ + struct ioc *ioc = v; + unsigned long *res_ptr = (unsigned long *)ioc->res_map; + int i, used = 0; + + seq_printf(s, "Hewlett Packard %s IOC rev %d.%d\n", + ioc->name, ((ioc->rev >> 4) & 0xF), (ioc->rev & 0xF)); +#ifdef CONFIG_NUMA + if (ioc->node != NUMA_NO_NODE) + seq_printf(s, "NUMA node : %d\n", ioc->node); +#endif + seq_printf(s, "IOVA size : %ld MB\n", ((ioc->pdir_size >> 3) * iovp_size)/(1024*1024)); + seq_printf(s, "IOVA page size : %ld kb\n", iovp_size/1024); + + for (i = 0; i < (ioc->res_size / sizeof(unsigned long)); ++i, ++res_ptr) + used += hweight64(*res_ptr); + + seq_printf(s, "PDIR size : %d entries\n", ioc->pdir_size >> 3); + seq_printf(s, "PDIR used : %d entries\n", used); + +#ifdef PDIR_SEARCH_TIMING + { + unsigned long i = 0, avg = 0, min, max; + min = max = ioc->avg_search[0]; + for (i = 0; i < SBA_SEARCH_SAMPLE; i++) { + avg += ioc->avg_search[i]; + if (ioc->avg_search[i] > max) max = ioc->avg_search[i]; + if (ioc->avg_search[i] < min) min = ioc->avg_search[i]; + } + avg /= SBA_SEARCH_SAMPLE; + seq_printf(s, "Bitmap search : %ld/%ld/%ld (min/avg/max CPU Cycles/IOVA page)\n", + min, avg, max); + } +#endif +#ifndef ALLOW_IOV_BYPASS + seq_printf(s, "IOVA bypass disabled\n"); +#endif + return 0; +} + +static const struct seq_operations ioc_seq_ops = { + .start = ioc_start, + .next = ioc_next, + .stop = ioc_stop, + .show = ioc_show +}; + +static int +ioc_open(struct inode *inode, struct file *file) +{ + return seq_open(file, &ioc_seq_ops); +} + +static const struct file_operations ioc_fops = { + .open = ioc_open, + .read = seq_read, + .llseek = seq_lseek, + .release = seq_release +}; + +static void __init +ioc_proc_init(void) +{ + struct proc_dir_entry *dir; + + dir = proc_mkdir("bus/mckinley", NULL); + if (!dir) + return; + + proc_create(ioc_list->name, 0, dir, &ioc_fops); +} +#endif + +static void +sba_connect_bus(struct pci_bus *bus) +{ + acpi_handle handle, parent; + acpi_status status; + struct ioc *ioc; + + if (!PCI_CONTROLLER(bus)) + panic(PFX "no sysdata on bus %d!\n", bus->number); + + if (PCI_CONTROLLER(bus)->iommu) + return; + + handle = acpi_device_handle(PCI_CONTROLLER(bus)->companion); + if (!handle) + return; + + /* + * The IOC scope encloses PCI root bridges in the ACPI + * namespace, so work our way out until we find an IOC we + * claimed previously. + */ + do { + for (ioc = ioc_list; ioc; ioc = ioc->next) + if (ioc->handle == handle) { + PCI_CONTROLLER(bus)->iommu = ioc; + return; + } + + status = acpi_get_parent(handle, &parent); + handle = parent; + } while (ACPI_SUCCESS(status)); + + printk(KERN_WARNING "No IOC for PCI Bus %04x:%02x in ACPI\n", pci_domain_nr(bus), bus->number); +} + +static void __init +sba_map_ioc_to_node(struct ioc *ioc, acpi_handle handle) +{ +#ifdef CONFIG_NUMA + unsigned int node; + + node = acpi_get_node(handle); + if (node != NUMA_NO_NODE && !node_online(node)) + node = NUMA_NO_NODE; + + ioc->node = node; +#endif +} + +static void acpi_sba_ioc_add(struct ioc *ioc) +{ + acpi_handle handle = ioc->handle; + acpi_status status; + u64 hpa, length; + struct acpi_device_info *adi; + + ioc_found = ioc->next; + status = hp_acpi_csr_space(handle, &hpa, &length); + if (ACPI_FAILURE(status)) + goto err; + + status = acpi_get_object_info(handle, &adi); + if (ACPI_FAILURE(status)) + goto err; + + /* + * For HWP0001, only SBA appears in ACPI namespace. It encloses the PCI + * root bridges, and its CSR space includes the IOC function. + */ + if (strncmp("HWP0001", adi->hardware_id.string, 7) == 0) { + hpa += ZX1_IOC_OFFSET; + /* zx1 based systems default to kernel page size iommu pages */ + if (!iovp_shift) + iovp_shift = min(PAGE_SHIFT, 16); + } + kfree(adi); + + /* + * default anything not caught above or specified on cmdline to 4k + * iommu page size + */ + if (!iovp_shift) + iovp_shift = 12; + + ioc_init(hpa, ioc); + /* setup NUMA node association */ + sba_map_ioc_to_node(ioc, handle); + return; + + err: + kfree(ioc); +} + +static const struct acpi_device_id hp_ioc_iommu_device_ids[] = { + {"HWP0001", 0}, + {"HWP0004", 0}, + {"", 0}, +}; + +static int acpi_sba_ioc_attach(struct acpi_device *device, + const struct acpi_device_id *not_used) +{ + struct ioc *ioc; + + ioc = kzalloc(sizeof(*ioc), GFP_KERNEL); + if (!ioc) + return -ENOMEM; + + ioc->next = ioc_found; + ioc_found = ioc; + ioc->handle = device->handle; + return 1; +} + + +static struct acpi_scan_handler acpi_sba_ioc_handler = { + .ids = hp_ioc_iommu_device_ids, + .attach = acpi_sba_ioc_attach, +}; + +static int __init acpi_sba_ioc_init_acpi(void) +{ + return acpi_scan_add_handler(&acpi_sba_ioc_handler); +} +/* This has to run before acpi_scan_init(). */ +arch_initcall(acpi_sba_ioc_init_acpi); + +extern struct dma_map_ops swiotlb_dma_ops; + +static int __init +sba_init(void) +{ + if (!ia64_platform_is("hpzx1") && !ia64_platform_is("hpzx1_swiotlb")) + return 0; + +#if defined(CONFIG_IA64_GENERIC) + /* If we are booting a kdump kernel, the sba_iommu will + * cause devices that were not shutdown properly to MCA + * as soon as they are turned back on. Our only option for + * a successful kdump kernel boot is to use the swiotlb. + */ + if (is_kdump_kernel()) { + dma_ops = &swiotlb_dma_ops; + if (swiotlb_late_init_with_default_size(64 * (1<<20)) != 0) + panic("Unable to initialize software I/O TLB:" + " Try machvec=dig boot option"); + machvec_init("dig"); + return 0; + } +#endif + + /* + * ioc_found should be populated by the acpi_sba_ioc_handler's .attach() + * routine, but that only happens if acpi_scan_init() has already run. + */ + while (ioc_found) + acpi_sba_ioc_add(ioc_found); + + if (!ioc_list) { +#ifdef CONFIG_IA64_GENERIC + /* + * If we didn't find something sba_iommu can claim, we + * need to setup the swiotlb and switch to the dig machvec. + */ + dma_ops = &swiotlb_dma_ops; + if (swiotlb_late_init_with_default_size(64 * (1<<20)) != 0) + panic("Unable to find SBA IOMMU or initialize " + "software I/O TLB: Try machvec=dig boot option"); + machvec_init("dig"); +#else + panic("Unable to find SBA IOMMU: Try a generic or DIG kernel"); +#endif + return 0; + } + +#if defined(CONFIG_IA64_GENERIC) || defined(CONFIG_IA64_HP_ZX1_SWIOTLB) + /* + * hpzx1_swiotlb needs to have a fairly small swiotlb bounce + * buffer setup to support devices with smaller DMA masks than + * sba_iommu can handle. + */ + if (ia64_platform_is("hpzx1_swiotlb")) { + extern void hwsw_init(void); + + hwsw_init(); + } +#endif + +#ifdef CONFIG_PCI + { + struct pci_bus *b = NULL; + while ((b = pci_find_next_bus(b)) != NULL) + sba_connect_bus(b); + } +#endif + +#ifdef CONFIG_PROC_FS + ioc_proc_init(); +#endif + return 0; +} + +subsys_initcall(sba_init); /* must be initialized after ACPI etc., but before any drivers... */ + +static int __init +nosbagart(char *str) +{ + reserve_sba_gart = 0; + return 1; +} + +static int sba_dma_supported (struct device *dev, u64 mask) +{ + /* make sure it's at least 32bit capable */ + return ((mask & 0xFFFFFFFFUL) == 0xFFFFFFFFUL); +} + +static int sba_dma_mapping_error(struct device *dev, dma_addr_t dma_addr) +{ + return 0; +} + +__setup("nosbagart", nosbagart); + +static int __init +sba_page_override(char *str) +{ + unsigned long page_size; + + page_size = memparse(str, &str); + switch (page_size) { + case 4096: + case 8192: + case 16384: + case 65536: + iovp_shift = ffs(page_size) - 1; + break; + default: + printk("%s: unknown/unsupported iommu page size %ld\n", + __func__, page_size); + } + + return 1; +} + +__setup("sbapagesize=",sba_page_override); + +struct dma_map_ops sba_dma_ops = { + .alloc = sba_alloc_coherent, + .free = sba_free_coherent, + .map_page = sba_map_page, + .unmap_page = sba_unmap_page, + .map_sg = sba_map_sg_attrs, + .unmap_sg = sba_unmap_sg_attrs, + .sync_single_for_cpu = machvec_dma_sync_single, + .sync_sg_for_cpu = machvec_dma_sync_sg, + .sync_single_for_device = machvec_dma_sync_single, + .sync_sg_for_device = machvec_dma_sync_sg, + .dma_supported = sba_dma_supported, + .mapping_error = sba_dma_mapping_error, +}; + +void sba_dma_init(void) +{ + dma_ops = &sba_dma_ops; +} diff --git a/kernel/arch/ia64/hp/sim/Kconfig b/kernel/arch/ia64/hp/sim/Kconfig new file mode 100644 index 000000000..d84707d55 --- /dev/null +++ b/kernel/arch/ia64/hp/sim/Kconfig @@ -0,0 +1,22 @@ + +menu "HP Simulator drivers" + depends on IA64_HP_SIM || IA64_GENERIC + +config HP_SIMETH + bool "Simulated Ethernet " + depends on NET + +config HP_SIMSERIAL + bool "Simulated serial driver support" + depends on TTY + +config HP_SIMSERIAL_CONSOLE + bool "Console for HP simulator" + depends on HP_SIMSERIAL + +config HP_SIMSCSI + bool "Simulated SCSI disk" + depends on SCSI=y + +endmenu + diff --git a/kernel/arch/ia64/hp/sim/Makefile b/kernel/arch/ia64/hp/sim/Makefile new file mode 100644 index 000000000..d10da4793 --- /dev/null +++ b/kernel/arch/ia64/hp/sim/Makefile @@ -0,0 +1,16 @@ +# +# ia64/platform/hp/sim/Makefile +# +# Copyright (C) 2002 Hewlett-Packard Co. +# David Mosberger-Tang <davidm@hpl.hp.com> +# Copyright (C) 1999 Silicon Graphics, Inc. +# Copyright (C) Srinivasa Thirumalachar (sprasad@engr.sgi.com) +# + +obj-y := hpsim_irq.o hpsim_setup.o hpsim.o +obj-$(CONFIG_IA64_GENERIC) += hpsim_machvec.o + +obj-$(CONFIG_HP_SIMETH) += simeth.o +obj-$(CONFIG_HP_SIMSERIAL) += simserial.o +obj-$(CONFIG_HP_SIMSERIAL_CONSOLE) += hpsim_console.o +obj-$(CONFIG_HP_SIMSCSI) += simscsi.o diff --git a/kernel/arch/ia64/hp/sim/boot/Makefile b/kernel/arch/ia64/hp/sim/boot/Makefile new file mode 100644 index 000000000..2e805e0cc --- /dev/null +++ b/kernel/arch/ia64/hp/sim/boot/Makefile @@ -0,0 +1,37 @@ +# +# ia64/boot/Makefile +# +# This file is subject to the terms and conditions of the GNU General Public +# License. See the file "COPYING" in the main directory of this archive +# for more details. +# +# Copyright (C) 1998, 2003 by David Mosberger-Tang <davidm@hpl.hp.com> +# + +targets-$(CONFIG_IA64_HP_SIM) += bootloader +targets := vmlinux.bin vmlinux.gz $(targets-y) + +quiet_cmd_cptotop = LN $@ + cmd_cptotop = ln -f $< $@ + +vmlinux.gz: $(obj)/vmlinux.gz $(addprefix $(obj)/,$(targets-y)) + $(call cmd,cptotop) + @echo ' Kernel: $@ is ready' + +boot: bootloader + +bootloader: $(obj)/bootloader + $(call cmd,cptotop) + +$(obj)/vmlinux.gz: $(obj)/vmlinux.bin FORCE + $(call if_changed,gzip) + +$(obj)/vmlinux.bin: vmlinux FORCE + $(call if_changed,objcopy) + + +LDFLAGS_bootloader = -static -T + +$(obj)/bootloader: $(src)/bootloader.lds $(obj)/bootloader.o $(obj)/boot_head.o $(obj)/fw-emu.o \ + lib/lib.a arch/ia64/lib/built-in.o arch/ia64/lib/lib.a FORCE + $(call if_changed,ld) diff --git a/kernel/arch/ia64/hp/sim/boot/boot_head.S b/kernel/arch/ia64/hp/sim/boot/boot_head.S new file mode 100644 index 000000000..880856549 --- /dev/null +++ b/kernel/arch/ia64/hp/sim/boot/boot_head.S @@ -0,0 +1,164 @@ +/* + * Copyright (C) 1998-2003 Hewlett-Packard Co + * David Mosberger-Tang <davidm@hpl.hp.com> + */ + +#include <asm/asmmacro.h> +#include <asm/pal.h> + + .bss + .align 16 +stack_mem: + .skip 16834 + + .text + +/* This needs to be defined because lib/string.c:strlcat() calls it in case of error... */ +GLOBAL_ENTRY(printk) + break 0 +END(printk) + +GLOBAL_ENTRY(_start) + .prologue + .save rp, r0 + .body + movl gp = __gp + movl sp = stack_mem+16384-16 + bsw.1 + br.call.sptk.many rp=start_bootloader +0: nop 0 /* dummy nop to make unwinding work */ +END(_start) + +/* + * Set a break point on this function so that symbols are available to set breakpoints in + * the kernel being debugged. + */ +GLOBAL_ENTRY(debug_break) + br.ret.sptk.many b0 +END(debug_break) + +GLOBAL_ENTRY(ssc) + .regstk 5,0,0,0 + mov r15=in4 + break 0x80001 + br.ret.sptk.many b0 +END(ssc) + +GLOBAL_ENTRY(jmp_to_kernel) + .regstk 2,0,0,0 + mov r28=in0 + mov b7=in1 + br.sptk.few b7 +END(jmp_to_kernel) + +/* + * r28 contains the index of the PAL function + * r29--31 the args + * Return values in ret0--3 (r8--11) + */ +GLOBAL_ENTRY(pal_emulator_static) + mov r8=-1 + mov r9=256 + ;; + cmp.gtu p6,p7=r9,r28 /* r28 <= 255? */ +(p6) br.cond.sptk.few static + ;; + mov r9=512 + ;; + cmp.gtu p6,p7=r9,r28 +(p6) br.cond.sptk.few stacked + ;; +static: cmp.eq p6,p7=PAL_PTCE_INFO,r28 +(p7) br.cond.sptk.few 1f + ;; + mov r8=0 /* status = 0 */ + movl r9=0x100000000 /* tc.base */ + movl r10=0x0000000200000003 /* count[0], count[1] */ + movl r11=0x1000000000002000 /* stride[0], stride[1] */ + br.cond.sptk.few rp +1: cmp.eq p6,p7=PAL_FREQ_RATIOS,r28 +(p7) br.cond.sptk.few 1f + mov r8=0 /* status = 0 */ + movl r9 =0x100000064 /* proc_ratio (1/100) */ + movl r10=0x100000100 /* bus_ratio<<32 (1/256) */ + movl r11=0x100000064 /* itc_ratio<<32 (1/100) */ + ;; +1: cmp.eq p6,p7=PAL_RSE_INFO,r28 +(p7) br.cond.sptk.few 1f + mov r8=0 /* status = 0 */ + mov r9=96 /* num phys stacked */ + mov r10=0 /* hints */ + mov r11=0 + br.cond.sptk.few rp +1: cmp.eq p6,p7=PAL_CACHE_FLUSH,r28 /* PAL_CACHE_FLUSH */ +(p7) br.cond.sptk.few 1f + mov r9=ar.lc + movl r8=524288 /* flush 512k million cache lines (16MB) */ + ;; + mov ar.lc=r8 + movl r8=0xe000000000000000 + ;; +.loop: fc r8 + add r8=32,r8 + br.cloop.sptk.few .loop + sync.i + ;; + srlz.i + ;; + mov ar.lc=r9 + mov r8=r0 + ;; +1: cmp.eq p6,p7=PAL_PERF_MON_INFO,r28 +(p7) br.cond.sptk.few 1f + mov r8=0 /* status = 0 */ + movl r9 =0x08122f04 /* generic=4 width=47 retired=8 cycles=18 */ + mov r10=0 /* reserved */ + mov r11=0 /* reserved */ + mov r16=0xffff /* implemented PMC */ + mov r17=0x3ffff /* implemented PMD */ + add r18=8,r29 /* second index */ + ;; + st8 [r29]=r16,16 /* store implemented PMC */ + st8 [r18]=r0,16 /* clear remaining bits */ + ;; + st8 [r29]=r0,16 /* clear remaining bits */ + st8 [r18]=r0,16 /* clear remaining bits */ + ;; + st8 [r29]=r17,16 /* store implemented PMD */ + st8 [r18]=r0,16 /* clear remaining bits */ + mov r16=0xf0 /* cycles count capable PMC */ + ;; + st8 [r29]=r0,16 /* clear remaining bits */ + st8 [r18]=r0,16 /* clear remaining bits */ + mov r17=0xf0 /* retired bundles capable PMC */ + ;; + st8 [r29]=r16,16 /* store cycles capable */ + st8 [r18]=r0,16 /* clear remaining bits */ + ;; + st8 [r29]=r0,16 /* clear remaining bits */ + st8 [r18]=r0,16 /* clear remaining bits */ + ;; + st8 [r29]=r17,16 /* store retired bundle capable */ + st8 [r18]=r0,16 /* clear remaining bits */ + ;; + st8 [r29]=r0,16 /* clear remaining bits */ + st8 [r18]=r0,16 /* clear remaining bits */ + ;; +1: cmp.eq p6,p7=PAL_VM_SUMMARY,r28 +(p7) br.cond.sptk.few 1f + mov r8=0 /* status = 0 */ + movl r9=0x2044040020F1865 /* num_tc_levels=2, num_unique_tcs=4 */ + /* max_itr_entry=64, max_dtr_entry=64 */ + /* hash_tag_id=2, max_pkr=15 */ + /* key_size=24, phys_add_size=50, vw=1 */ + movl r10=0x183C /* rid_size=24, impl_va_msb=60 */ + ;; +1: cmp.eq p6,p7=PAL_MEM_ATTRIB,r28 +(p7) br.cond.sptk.few 1f + mov r8=0 /* status = 0 */ + mov r9=0x80|0x01 /* NatPage|WB */ + ;; +1: br.cond.sptk.few rp +stacked: + br.ret.sptk.few rp +END(pal_emulator_static) diff --git a/kernel/arch/ia64/hp/sim/boot/bootloader.c b/kernel/arch/ia64/hp/sim/boot/bootloader.c new file mode 100644 index 000000000..28f4b230b --- /dev/null +++ b/kernel/arch/ia64/hp/sim/boot/bootloader.c @@ -0,0 +1,174 @@ +/* + * arch/ia64/hp/sim/boot/bootloader.c + * + * Loads an ELF kernel. + * + * Copyright (C) 1998-2003 Hewlett-Packard Co + * David Mosberger-Tang <davidm@hpl.hp.com> + * Stephane Eranian <eranian@hpl.hp.com> + * + * 01/07/99 S.Eranian modified to pass command line arguments to kernel + */ +struct task_struct; /* forward declaration for elf.h */ + +#include <linux/elf.h> +#include <linux/init.h> +#include <linux/kernel.h> + +#include <asm/elf.h> +#include <asm/intrinsics.h> +#include <asm/pal.h> +#include <asm/pgtable.h> +#include <asm/sal.h> + +#include "ssc.h" + +struct disk_req { + unsigned long addr; + unsigned len; +}; + +struct disk_stat { + int fd; + unsigned count; +}; + +extern void jmp_to_kernel (unsigned long bp, unsigned long e_entry); +extern struct ia64_boot_param *sys_fw_init (const char *args, int arglen); +extern void debug_break (void); + +static void +cons_write (const char *buf) +{ + unsigned long ch; + + while ((ch = *buf++) != '\0') { + ssc(ch, 0, 0, 0, SSC_PUTCHAR); + if (ch == '\n') + ssc('\r', 0, 0, 0, SSC_PUTCHAR); + } +} + +#define MAX_ARGS 32 + +void +start_bootloader (void) +{ + static char mem[4096]; + static char buffer[1024]; + unsigned long off; + int fd, i; + struct disk_req req; + struct disk_stat stat; + struct elfhdr *elf; + struct elf_phdr *elf_phdr; /* program header */ + unsigned long e_entry, e_phoff, e_phnum; + register struct ia64_boot_param *bp; + char *kpath, *args; + long arglen = 0; + + ssc(0, 0, 0, 0, SSC_CONSOLE_INIT); + + /* + * S.Eranian: extract the commandline argument from the simulator + * + * The expected format is as follows: + * + * kernelname args... + * + * Both are optional but you can't have the second one without the first. + */ + arglen = ssc((long) buffer, 0, 0, 0, SSC_GET_ARGS); + + kpath = "vmlinux"; + args = buffer; + if (arglen > 0) { + kpath = buffer; + while (*args != ' ' && *args != '\0') + ++args, --arglen; + if (*args == ' ') + *args++ = '\0', --arglen; + } + + if (arglen <= 0) { + args = ""; + arglen = 1; + } + + fd = ssc((long) kpath, 1, 0, 0, SSC_OPEN); + + if (fd < 0) { + cons_write(kpath); + cons_write(": file not found, reboot now\n"); + for(;;); + } + stat.fd = fd; + off = 0; + + req.len = sizeof(mem); + req.addr = (long) mem; + ssc(fd, 1, (long) &req, off, SSC_READ); + ssc((long) &stat, 0, 0, 0, SSC_WAIT_COMPLETION); + + elf = (struct elfhdr *) mem; + if (elf->e_ident[0] == 0x7f && strncmp(elf->e_ident + 1, "ELF", 3) != 0) { + cons_write("not an ELF file\n"); + return; + } + if (elf->e_type != ET_EXEC) { + cons_write("not an ELF executable\n"); + return; + } + if (!elf_check_arch(elf)) { + cons_write("kernel not for this processor\n"); + return; + } + + e_entry = elf->e_entry; + e_phnum = elf->e_phnum; + e_phoff = elf->e_phoff; + + cons_write("loading "); + cons_write(kpath); + cons_write("...\n"); + + for (i = 0; i < e_phnum; ++i) { + req.len = sizeof(*elf_phdr); + req.addr = (long) mem; + ssc(fd, 1, (long) &req, e_phoff, SSC_READ); + ssc((long) &stat, 0, 0, 0, SSC_WAIT_COMPLETION); + if (stat.count != sizeof(*elf_phdr)) { + cons_write("failed to read phdr\n"); + return; + } + e_phoff += sizeof(*elf_phdr); + + elf_phdr = (struct elf_phdr *) mem; + + if (elf_phdr->p_type != PT_LOAD) + continue; + + req.len = elf_phdr->p_filesz; + req.addr = __pa(elf_phdr->p_paddr); + ssc(fd, 1, (long) &req, elf_phdr->p_offset, SSC_READ); + ssc((long) &stat, 0, 0, 0, SSC_WAIT_COMPLETION); + memset((char *)__pa(elf_phdr->p_paddr) + elf_phdr->p_filesz, 0, + elf_phdr->p_memsz - elf_phdr->p_filesz); + } + ssc(fd, 0, 0, 0, SSC_CLOSE); + + cons_write("starting kernel...\n"); + + /* fake an I/O base address: */ + ia64_setreg(_IA64_REG_AR_KR0, 0xffffc000000UL); + + bp = sys_fw_init(args, arglen); + + ssc(0, (long) kpath, 0, 0, SSC_LOAD_SYMBOLS); + + debug_break(); + jmp_to_kernel((unsigned long) bp, e_entry); + + cons_write("kernel returned!\n"); + ssc(-1, 0, 0, 0, SSC_EXIT); +} diff --git a/kernel/arch/ia64/hp/sim/boot/bootloader.lds b/kernel/arch/ia64/hp/sim/boot/bootloader.lds new file mode 100644 index 000000000..3977f25a1 --- /dev/null +++ b/kernel/arch/ia64/hp/sim/boot/bootloader.lds @@ -0,0 +1,66 @@ +OUTPUT_FORMAT("elf64-ia64-little") +OUTPUT_ARCH(ia64) +ENTRY(_start) +SECTIONS +{ + /* Read-only sections, merged into text segment: */ + . = 0x100000; + + _text = .; + .text : { *(__ivt_section) *(.text) } + _etext = .; + + /* Global data */ + _data = .; + .rodata : { *(.rodata) *(.rodata.*) } + .data : { *(.data) *(.gnu.linkonce.d*) CONSTRUCTORS } + __gp = ALIGN (8) + 0x200000; + .got : { *(.got.plt) *(.got) } + /* We want the small data sections together, so single-instruction offsets + can access them all, and initialized data all before uninitialized, so + we can shorten the on-disk segment size. */ + .sdata : { *(.sdata) } + _edata = .; + + __bss_start = .; + .sbss : { *(.sbss) *(.scommon) } + .bss : { *(.bss) *(COMMON) } + . = ALIGN(64 / 8); + __bss_stop = .; + _end = . ; + + /* Stabs debugging sections. */ + .stab 0 : { *(.stab) } + .stabstr 0 : { *(.stabstr) } + .stab.excl 0 : { *(.stab.excl) } + .stab.exclstr 0 : { *(.stab.exclstr) } + .stab.index 0 : { *(.stab.index) } + .stab.indexstr 0 : { *(.stab.indexstr) } + .comment 0 : { *(.comment) } + /* DWARF debug sections. + Symbols in the DWARF debugging sections are relative to the beginning + of the section so we begin them at 0. */ + /* DWARF 1 */ + .debug 0 : { *(.debug) } + .line 0 : { *(.line) } + /* GNU DWARF 1 extensions */ + .debug_srcinfo 0 : { *(.debug_srcinfo) } + .debug_sfnames 0 : { *(.debug_sfnames) } + /* DWARF 1.1 and DWARF 2 */ + .debug_aranges 0 : { *(.debug_aranges) } + .debug_pubnames 0 : { *(.debug_pubnames) } + /* DWARF 2 */ + .debug_info 0 : { *(.debug_info) } + .debug_abbrev 0 : { *(.debug_abbrev) } + .debug_line 0 : { *(.debug_line) } + .debug_frame 0 : { *(.debug_frame) } + .debug_str 0 : { *(.debug_str) } + .debug_loc 0 : { *(.debug_loc) } + .debug_macinfo 0 : { *(.debug_macinfo) } + /* SGI/MIPS DWARF 2 extensions */ + .debug_weaknames 0 : { *(.debug_weaknames) } + .debug_funcnames 0 : { *(.debug_funcnames) } + .debug_typenames 0 : { *(.debug_typenames) } + .debug_varnames 0 : { *(.debug_varnames) } + /* These must appear regardless of . */ +} diff --git a/kernel/arch/ia64/hp/sim/boot/fw-emu.c b/kernel/arch/ia64/hp/sim/boot/fw-emu.c new file mode 100644 index 000000000..87bf9ad8c --- /dev/null +++ b/kernel/arch/ia64/hp/sim/boot/fw-emu.c @@ -0,0 +1,373 @@ +/* + * PAL & SAL emulation. + * + * Copyright (C) 1998-2001 Hewlett-Packard Co + * David Mosberger-Tang <davidm@hpl.hp.com> + */ + +#ifdef CONFIG_PCI +# include <linux/pci.h> +#endif + +#include <linux/efi.h> +#include <asm/io.h> +#include <asm/pal.h> +#include <asm/sal.h> +#include <asm/setup.h> + +#include "ssc.h" + +#define MB (1024*1024UL) + +#define SIMPLE_MEMMAP 1 + +#if SIMPLE_MEMMAP +# define NUM_MEM_DESCS 4 +#else +# define NUM_MEM_DESCS 16 +#endif + +static char fw_mem[( sizeof(struct ia64_boot_param) + + sizeof(efi_system_table_t) + + sizeof(efi_runtime_services_t) + + 1*sizeof(efi_config_table_t) + + sizeof(struct ia64_sal_systab) + + sizeof(struct ia64_sal_desc_entry_point) + + NUM_MEM_DESCS*(sizeof(efi_memory_desc_t)) + + 1024)] __attribute__ ((aligned (8))); + +#define SECS_PER_HOUR (60 * 60) +#define SECS_PER_DAY (SECS_PER_HOUR * 24) + +/* Compute the `struct tm' representation of *T, + offset OFFSET seconds east of UTC, + and store year, yday, mon, mday, wday, hour, min, sec into *TP. + Return nonzero if successful. */ +int +offtime (unsigned long t, efi_time_t *tp) +{ + const unsigned short int __mon_yday[2][13] = + { + /* Normal years. */ + { 0, 31, 59, 90, 120, 151, 181, 212, 243, 273, 304, 334, 365 }, + /* Leap years. */ + { 0, 31, 60, 91, 121, 152, 182, 213, 244, 274, 305, 335, 366 } + }; + long int days, rem, y; + const unsigned short int *ip; + + days = t / SECS_PER_DAY; + rem = t % SECS_PER_DAY; + while (rem < 0) { + rem += SECS_PER_DAY; + --days; + } + while (rem >= SECS_PER_DAY) { + rem -= SECS_PER_DAY; + ++days; + } + tp->hour = rem / SECS_PER_HOUR; + rem %= SECS_PER_HOUR; + tp->minute = rem / 60; + tp->second = rem % 60; + /* January 1, 1970 was a Thursday. */ + y = 1970; + +# define DIV(a, b) ((a) / (b) - ((a) % (b) < 0)) +# define LEAPS_THRU_END_OF(y) (DIV (y, 4) - DIV (y, 100) + DIV (y, 400)) +# define __isleap(year) \ + ((year) % 4 == 0 && ((year) % 100 != 0 || (year) % 400 == 0)) + + while (days < 0 || days >= (__isleap (y) ? 366 : 365)) { + /* Guess a corrected year, assuming 365 days per year. */ + long int yg = y + days / 365 - (days % 365 < 0); + + /* Adjust DAYS and Y to match the guessed year. */ + days -= ((yg - y) * 365 + LEAPS_THRU_END_OF (yg - 1) + - LEAPS_THRU_END_OF (y - 1)); + y = yg; + } + tp->year = y; + ip = __mon_yday[__isleap(y)]; + for (y = 11; days < (long int) ip[y]; --y) + continue; + days -= ip[y]; + tp->month = y + 1; + tp->day = days + 1; + return 1; +} + +extern void pal_emulator_static (void); + +/* Macro to emulate SAL call using legacy IN and OUT calls to CF8, CFC etc.. */ + +#define BUILD_CMD(addr) ((0x80000000 | (addr)) & ~3) + +#define REG_OFFSET(addr) (0x00000000000000FF & (addr)) +#define DEVICE_FUNCTION(addr) (0x000000000000FF00 & (addr)) +#define BUS_NUMBER(addr) (0x0000000000FF0000 & (addr)) + +static efi_status_t +fw_efi_get_time (efi_time_t *tm, efi_time_cap_t *tc) +{ +#if defined(CONFIG_IA64_HP_SIM) || defined(CONFIG_IA64_GENERIC) + struct { + int tv_sec; /* must be 32bits to work */ + int tv_usec; + } tv32bits; + + ssc((unsigned long) &tv32bits, 0, 0, 0, SSC_GET_TOD); + + memset(tm, 0, sizeof(*tm)); + offtime(tv32bits.tv_sec, tm); + + if (tc) + memset(tc, 0, sizeof(*tc)); +#else +# error Not implemented yet... +#endif + return EFI_SUCCESS; +} + +static void +efi_reset_system (int reset_type, efi_status_t status, unsigned long data_size, efi_char16_t *data) +{ +#if defined(CONFIG_IA64_HP_SIM) || defined(CONFIG_IA64_GENERIC) + ssc(status, 0, 0, 0, SSC_EXIT); +#else +# error Not implemented yet... +#endif +} + +static efi_status_t +efi_unimplemented (void) +{ + return EFI_UNSUPPORTED; +} + +static struct sal_ret_values +sal_emulator (long index, unsigned long in1, unsigned long in2, + unsigned long in3, unsigned long in4, unsigned long in5, + unsigned long in6, unsigned long in7) +{ + long r9 = 0; + long r10 = 0; + long r11 = 0; + long status; + + /* + * Don't do a "switch" here since that gives us code that + * isn't self-relocatable. + */ + status = 0; + if (index == SAL_FREQ_BASE) { + if (in1 == SAL_FREQ_BASE_PLATFORM) + r9 = 200000000; + else if (in1 == SAL_FREQ_BASE_INTERVAL_TIMER) { + /* + * Is this supposed to be the cr.itc frequency + * or something platform specific? The SAL + * doc ain't exactly clear on this... + */ + r9 = 700000000; + } else if (in1 == SAL_FREQ_BASE_REALTIME_CLOCK) + r9 = 1; + else + status = -1; + } else if (index == SAL_SET_VECTORS) { + ; + } else if (index == SAL_GET_STATE_INFO) { + ; + } else if (index == SAL_GET_STATE_INFO_SIZE) { + ; + } else if (index == SAL_CLEAR_STATE_INFO) { + ; + } else if (index == SAL_MC_RENDEZ) { + ; + } else if (index == SAL_MC_SET_PARAMS) { + ; + } else if (index == SAL_CACHE_FLUSH) { + ; + } else if (index == SAL_CACHE_INIT) { + ; +#ifdef CONFIG_PCI + } else if (index == SAL_PCI_CONFIG_READ) { + /* + * in1 contains the PCI configuration address and in2 + * the size of the read. The value that is read is + * returned via the general register r9. + */ + outl(BUILD_CMD(in1), 0xCF8); + if (in2 == 1) /* Reading byte */ + r9 = inb(0xCFC + ((REG_OFFSET(in1) & 3))); + else if (in2 == 2) /* Reading word */ + r9 = inw(0xCFC + ((REG_OFFSET(in1) & 2))); + else /* Reading dword */ + r9 = inl(0xCFC); + status = PCIBIOS_SUCCESSFUL; + } else if (index == SAL_PCI_CONFIG_WRITE) { + /* + * in1 contains the PCI configuration address, in2 the + * size of the write, and in3 the actual value to be + * written out. + */ + outl(BUILD_CMD(in1), 0xCF8); + if (in2 == 1) /* Writing byte */ + outb(in3, 0xCFC + ((REG_OFFSET(in1) & 3))); + else if (in2 == 2) /* Writing word */ + outw(in3, 0xCFC + ((REG_OFFSET(in1) & 2))); + else /* Writing dword */ + outl(in3, 0xCFC); + status = PCIBIOS_SUCCESSFUL; +#endif /* CONFIG_PCI */ + } else if (index == SAL_UPDATE_PAL) { + ; + } else { + status = -1; + } + return ((struct sal_ret_values) {status, r9, r10, r11}); +} + +struct ia64_boot_param * +sys_fw_init (const char *args, int arglen) +{ + efi_system_table_t *efi_systab; + efi_runtime_services_t *efi_runtime; + efi_config_table_t *efi_tables; + struct ia64_sal_systab *sal_systab; + efi_memory_desc_t *efi_memmap, *md; + unsigned long *pal_desc, *sal_desc; + struct ia64_sal_desc_entry_point *sal_ed; + struct ia64_boot_param *bp; + unsigned char checksum = 0; + char *cp, *cmd_line; + int i = 0; +# define MAKE_MD(typ, attr, start, end) \ + do { \ + md = efi_memmap + i++; \ + md->type = typ; \ + md->pad = 0; \ + md->phys_addr = start; \ + md->virt_addr = 0; \ + md->num_pages = (end - start) >> 12; \ + md->attribute = attr; \ + } while (0) + + memset(fw_mem, 0, sizeof(fw_mem)); + + pal_desc = (unsigned long *) &pal_emulator_static; + sal_desc = (unsigned long *) &sal_emulator; + + cp = fw_mem; + efi_systab = (void *) cp; cp += sizeof(*efi_systab); + efi_runtime = (void *) cp; cp += sizeof(*efi_runtime); + efi_tables = (void *) cp; cp += sizeof(*efi_tables); + sal_systab = (void *) cp; cp += sizeof(*sal_systab); + sal_ed = (void *) cp; cp += sizeof(*sal_ed); + efi_memmap = (void *) cp; cp += NUM_MEM_DESCS*sizeof(*efi_memmap); + bp = (void *) cp; cp += sizeof(*bp); + cmd_line = (void *) cp; + + if (args) { + if (arglen >= 1024) + arglen = 1023; + memcpy(cmd_line, args, arglen); + } else { + arglen = 0; + } + cmd_line[arglen] = '\0'; + + memset(efi_systab, 0, sizeof(*efi_systab)); + efi_systab->hdr.signature = EFI_SYSTEM_TABLE_SIGNATURE; + efi_systab->hdr.revision = ((1 << 16) | 00); + efi_systab->hdr.headersize = sizeof(efi_systab->hdr); + efi_systab->fw_vendor = __pa("H\0e\0w\0l\0e\0t\0t\0-\0P\0a\0c\0k\0a\0r\0d\0\0"); + efi_systab->fw_revision = 1; + efi_systab->runtime = (void *) __pa(efi_runtime); + efi_systab->nr_tables = 1; + efi_systab->tables = __pa(efi_tables); + + efi_runtime->hdr.signature = EFI_RUNTIME_SERVICES_SIGNATURE; + efi_runtime->hdr.revision = EFI_RUNTIME_SERVICES_REVISION; + efi_runtime->hdr.headersize = sizeof(efi_runtime->hdr); + efi_runtime->get_time = (void *)__pa(&fw_efi_get_time); + efi_runtime->set_time = (void *)__pa(&efi_unimplemented); + efi_runtime->get_wakeup_time = (void *)__pa(&efi_unimplemented); + efi_runtime->set_wakeup_time = (void *)__pa(&efi_unimplemented); + efi_runtime->set_virtual_address_map = (void *)__pa(&efi_unimplemented); + efi_runtime->get_variable = (void *)__pa(&efi_unimplemented); + efi_runtime->get_next_variable = (void *)__pa(&efi_unimplemented); + efi_runtime->set_variable = (void *)__pa(&efi_unimplemented); + efi_runtime->get_next_high_mono_count = (void *)__pa(&efi_unimplemented); + efi_runtime->reset_system = (void *)__pa(&efi_reset_system); + + efi_tables->guid = SAL_SYSTEM_TABLE_GUID; + efi_tables->table = __pa(sal_systab); + + /* fill in the SAL system table: */ + memcpy(sal_systab->signature, "SST_", 4); + sal_systab->size = sizeof(*sal_systab); + sal_systab->sal_rev_minor = 1; + sal_systab->sal_rev_major = 0; + sal_systab->entry_count = 1; + +#ifdef CONFIG_IA64_GENERIC + strcpy(sal_systab->oem_id, "Generic"); + strcpy(sal_systab->product_id, "IA-64 system"); +#endif + +#ifdef CONFIG_IA64_HP_SIM + strcpy(sal_systab->oem_id, "Hewlett-Packard"); + strcpy(sal_systab->product_id, "HP-simulator"); +#endif + + /* fill in an entry point: */ + sal_ed->type = SAL_DESC_ENTRY_POINT; + sal_ed->pal_proc = __pa(pal_desc[0]); + sal_ed->sal_proc = __pa(sal_desc[0]); + sal_ed->gp = __pa(sal_desc[1]); + + for (cp = (char *) sal_systab; cp < (char *) efi_memmap; ++cp) + checksum += *cp; + + sal_systab->checksum = -checksum; + +#if SIMPLE_MEMMAP + /* simulate free memory at physical address zero */ + MAKE_MD(EFI_BOOT_SERVICES_DATA, EFI_MEMORY_WB, 0*MB, 1*MB); + MAKE_MD(EFI_PAL_CODE, EFI_MEMORY_WB, 1*MB, 2*MB); + MAKE_MD(EFI_CONVENTIONAL_MEMORY, EFI_MEMORY_WB, 2*MB, 130*MB); + MAKE_MD(EFI_CONVENTIONAL_MEMORY, EFI_MEMORY_WB, 4096*MB, 4128*MB); +#else + MAKE_MD( 4, 0x9, 0x0000000000000000, 0x0000000000001000); + MAKE_MD( 7, 0x9, 0x0000000000001000, 0x000000000008a000); + MAKE_MD( 4, 0x9, 0x000000000008a000, 0x00000000000a0000); + MAKE_MD( 5, 0x8000000000000009, 0x00000000000c0000, 0x0000000000100000); + MAKE_MD( 7, 0x9, 0x0000000000100000, 0x0000000004400000); + MAKE_MD( 2, 0x9, 0x0000000004400000, 0x0000000004be5000); + MAKE_MD( 7, 0x9, 0x0000000004be5000, 0x000000007f77e000); + MAKE_MD( 6, 0x8000000000000009, 0x000000007f77e000, 0x000000007fb94000); + MAKE_MD( 6, 0x8000000000000009, 0x000000007fb94000, 0x000000007fb95000); + MAKE_MD( 6, 0x8000000000000009, 0x000000007fb95000, 0x000000007fc00000); + MAKE_MD(13, 0x8000000000000009, 0x000000007fc00000, 0x000000007fc3a000); + MAKE_MD( 7, 0x9, 0x000000007fc3a000, 0x000000007fea0000); + MAKE_MD( 5, 0x8000000000000009, 0x000000007fea0000, 0x000000007fea8000); + MAKE_MD( 7, 0x9, 0x000000007fea8000, 0x000000007feab000); + MAKE_MD( 5, 0x8000000000000009, 0x000000007feab000, 0x000000007ffff000); + MAKE_MD( 7, 0x9, 0x00000000ff400000, 0x0000000104000000); +#endif + + bp->efi_systab = __pa(&fw_mem); + bp->efi_memmap = __pa(efi_memmap); + bp->efi_memmap_size = NUM_MEM_DESCS*sizeof(efi_memory_desc_t); + bp->efi_memdesc_size = sizeof(efi_memory_desc_t); + bp->efi_memdesc_version = 1; + bp->command_line = __pa(cmd_line); + bp->console_info.num_cols = 80; + bp->console_info.num_rows = 25; + bp->console_info.orig_x = 0; + bp->console_info.orig_y = 24; + bp->fpswa = 0; + + return bp; +} diff --git a/kernel/arch/ia64/hp/sim/boot/ssc.h b/kernel/arch/ia64/hp/sim/boot/ssc.h new file mode 100644 index 000000000..3b94c03e4 --- /dev/null +++ b/kernel/arch/ia64/hp/sim/boot/ssc.h @@ -0,0 +1,35 @@ +/* + * Copyright (C) 1998-2003 Hewlett-Packard Co + * David Mosberger-Tang <davidm@hpl.hp.com> + * Stephane Eranian <eranian@hpl.hp.com> + */ +#ifndef ssc_h +#define ssc_h + +/* Simulator system calls: */ + +#define SSC_CONSOLE_INIT 20 +#define SSC_GETCHAR 21 +#define SSC_PUTCHAR 31 +#define SSC_OPEN 50 +#define SSC_CLOSE 51 +#define SSC_READ 52 +#define SSC_WRITE 53 +#define SSC_GET_COMPLETION 54 +#define SSC_WAIT_COMPLETION 55 +#define SSC_CONNECT_INTERRUPT 58 +#define SSC_GENERATE_INTERRUPT 59 +#define SSC_SET_PERIODIC_INTERRUPT 60 +#define SSC_GET_RTC 65 +#define SSC_EXIT 66 +#define SSC_LOAD_SYMBOLS 69 +#define SSC_GET_TOD 74 + +#define SSC_GET_ARGS 75 + +/* + * Simulator system call. + */ +extern long ssc (long arg0, long arg1, long arg2, long arg3, int nr); + +#endif /* ssc_h */ diff --git a/kernel/arch/ia64/hp/sim/hpsim.S b/kernel/arch/ia64/hp/sim/hpsim.S new file mode 100644 index 000000000..ff16e8a85 --- /dev/null +++ b/kernel/arch/ia64/hp/sim/hpsim.S @@ -0,0 +1,10 @@ +#include <asm/asmmacro.h> + +/* + * Simulator system call. + */ +GLOBAL_ENTRY(ia64_ssc) + mov r15=r36 + break 0x80001 + br.ret.sptk.many rp +END(ia64_ssc) diff --git a/kernel/arch/ia64/hp/sim/hpsim_console.c b/kernel/arch/ia64/hp/sim/hpsim_console.c new file mode 100644 index 000000000..01663bc42 --- /dev/null +++ b/kernel/arch/ia64/hp/sim/hpsim_console.c @@ -0,0 +1,76 @@ +/* + * Platform dependent support for HP simulator. + * + * Copyright (C) 1998, 1999, 2002 Hewlett-Packard Co + * David Mosberger-Tang <davidm@hpl.hp.com> + * Copyright (C) 1999 Vijay Chander <vijay@engr.sgi.com> + */ + +#include <linux/init.h> +#include <linux/kernel.h> +#include <linux/param.h> +#include <linux/string.h> +#include <linux/types.h> +#include <linux/tty.h> +#include <linux/kdev_t.h> +#include <linux/console.h> + +#include <asm/delay.h> +#include <asm/irq.h> +#include <asm/pal.h> +#include <asm/machvec.h> +#include <asm/pgtable.h> +#include <asm/sal.h> +#include <asm/hpsim.h> + +#include "hpsim_ssc.h" + +static int simcons_init (struct console *, char *); +static void simcons_write (struct console *, const char *, unsigned); +static struct tty_driver *simcons_console_device (struct console *, int *); + +static struct console hpsim_cons = { + .name = "simcons", + .write = simcons_write, + .device = simcons_console_device, + .setup = simcons_init, + .flags = CON_PRINTBUFFER, + .index = -1, +}; + +static int +simcons_init (struct console *cons, char *options) +{ + return 0; +} + +static void +simcons_write (struct console *cons, const char *buf, unsigned count) +{ + unsigned long ch; + + while (count-- > 0) { + ch = *buf++; + ia64_ssc(ch, 0, 0, 0, SSC_PUTCHAR); + if (ch == '\n') + ia64_ssc('\r', 0, 0, 0, SSC_PUTCHAR); + } +} + +static struct tty_driver *simcons_console_device (struct console *c, int *index) +{ + *index = c->index; + return hp_simserial_driver; +} + +int simcons_register(void) +{ + if (!ia64_platform_is("hpsim")) + return 1; + + if (hpsim_cons.flags & CON_ENABLED) + return 1; + + register_console(&hpsim_cons); + return 0; +} diff --git a/kernel/arch/ia64/hp/sim/hpsim_irq.c b/kernel/arch/ia64/hp/sim/hpsim_irq.c new file mode 100644 index 000000000..0aa70ebda --- /dev/null +++ b/kernel/arch/ia64/hp/sim/hpsim_irq.c @@ -0,0 +1,75 @@ +/* + * Platform dependent support for HP simulator. + * + * Copyright (C) 1998-2001 Hewlett-Packard Co + * Copyright (C) 1998-2001 David Mosberger-Tang <davidm@hpl.hp.com> + */ + +#include <linux/init.h> +#include <linux/kernel.h> +#include <linux/sched.h> +#include <linux/irq.h> + +#include "hpsim_ssc.h" + +static unsigned int +hpsim_irq_startup(struct irq_data *data) +{ + return 0; +} + +static void +hpsim_irq_noop(struct irq_data *data) +{ +} + +static int +hpsim_set_affinity_noop(struct irq_data *d, const struct cpumask *b, bool f) +{ + return 0; +} + +static struct irq_chip irq_type_hp_sim = { + .name = "hpsim", + .irq_startup = hpsim_irq_startup, + .irq_shutdown = hpsim_irq_noop, + .irq_enable = hpsim_irq_noop, + .irq_disable = hpsim_irq_noop, + .irq_ack = hpsim_irq_noop, + .irq_set_affinity = hpsim_set_affinity_noop, +}; + +static void hpsim_irq_set_chip(int irq) +{ + struct irq_chip *chip = irq_get_chip(irq); + + if (chip == &no_irq_chip) + irq_set_chip(irq, &irq_type_hp_sim); +} + +static void hpsim_connect_irq(int intr, int irq) +{ + ia64_ssc(intr, irq, 0, 0, SSC_CONNECT_INTERRUPT); +} + +int hpsim_get_irq(int intr) +{ + int irq = assign_irq_vector(AUTO_ASSIGN); + + if (irq >= 0) { + hpsim_irq_set_chip(irq); + irq_set_handler(irq, handle_simple_irq); + hpsim_connect_irq(intr, irq); + } + + return irq; +} + +void __init +hpsim_irq_init (void) +{ + int i; + + for_each_active_irq(i) + hpsim_irq_set_chip(i); +} diff --git a/kernel/arch/ia64/hp/sim/hpsim_machvec.c b/kernel/arch/ia64/hp/sim/hpsim_machvec.c new file mode 100644 index 000000000..c21419359 --- /dev/null +++ b/kernel/arch/ia64/hp/sim/hpsim_machvec.c @@ -0,0 +1,3 @@ +#define MACHVEC_PLATFORM_NAME hpsim +#define MACHVEC_PLATFORM_HEADER <asm/machvec_hpsim.h> +#include <asm/machvec_init.h> diff --git a/kernel/arch/ia64/hp/sim/hpsim_setup.c b/kernel/arch/ia64/hp/sim/hpsim_setup.c new file mode 100644 index 000000000..664a5402a --- /dev/null +++ b/kernel/arch/ia64/hp/sim/hpsim_setup.c @@ -0,0 +1,40 @@ +/* + * Platform dependent support for HP simulator. + * + * Copyright (C) 1998, 1999, 2002 Hewlett-Packard Co + * David Mosberger-Tang <davidm@hpl.hp.com> + * Copyright (C) 1999 Vijay Chander <vijay@engr.sgi.com> + */ +#include <linux/console.h> +#include <linux/init.h> +#include <linux/kdev_t.h> +#include <linux/kernel.h> +#include <linux/major.h> +#include <linux/param.h> +#include <linux/root_dev.h> +#include <linux/string.h> +#include <linux/types.h> + +#include <asm/delay.h> +#include <asm/irq.h> +#include <asm/pal.h> +#include <asm/machvec.h> +#include <asm/pgtable.h> +#include <asm/sal.h> +#include <asm/hpsim.h> + +#include "hpsim_ssc.h" + +void +ia64_ctl_trace (long on) +{ + ia64_ssc(on, 0, 0, 0, SSC_CTL_TRACE); +} + +void __init +hpsim_setup (char **cmdline_p) +{ + ROOT_DEV = Root_SDA1; /* default to first SCSI drive */ + + simcons_register(); +} diff --git a/kernel/arch/ia64/hp/sim/hpsim_ssc.h b/kernel/arch/ia64/hp/sim/hpsim_ssc.h new file mode 100644 index 000000000..bfa390627 --- /dev/null +++ b/kernel/arch/ia64/hp/sim/hpsim_ssc.h @@ -0,0 +1,36 @@ +/* + * Platform dependent support for HP simulator. + * + * Copyright (C) 1998, 1999 Hewlett-Packard Co + * Copyright (C) 1998, 1999 David Mosberger-Tang <davidm@hpl.hp.com> + * Copyright (C) 1999 Vijay Chander <vijay@engr.sgi.com> + */ +#ifndef _IA64_PLATFORM_HPSIM_SSC_H +#define _IA64_PLATFORM_HPSIM_SSC_H + +/* Simulator system calls: */ + +#define SSC_CONSOLE_INIT 20 +#define SSC_GETCHAR 21 +#define SSC_PUTCHAR 31 +#define SSC_CONNECT_INTERRUPT 58 +#define SSC_GENERATE_INTERRUPT 59 +#define SSC_SET_PERIODIC_INTERRUPT 60 +#define SSC_GET_RTC 65 +#define SSC_EXIT 66 +#define SSC_LOAD_SYMBOLS 69 +#define SSC_GET_TOD 74 +#define SSC_CTL_TRACE 76 + +#define SSC_NETDEV_PROBE 100 +#define SSC_NETDEV_SEND 101 +#define SSC_NETDEV_RECV 102 +#define SSC_NETDEV_ATTACH 103 +#define SSC_NETDEV_DETACH 104 + +/* + * Simulator system call. + */ +extern long ia64_ssc (long arg0, long arg1, long arg2, long arg3, int nr); + +#endif /* _IA64_PLATFORM_HPSIM_SSC_H */ diff --git a/kernel/arch/ia64/hp/sim/simeth.c b/kernel/arch/ia64/hp/sim/simeth.c new file mode 100644 index 000000000..d1b04c4c9 --- /dev/null +++ b/kernel/arch/ia64/hp/sim/simeth.c @@ -0,0 +1,509 @@ +/* + * Simulated Ethernet Driver + * + * Copyright (C) 1999-2001, 2003 Hewlett-Packard Co + * Stephane Eranian <eranian@hpl.hp.com> + */ +#include <linux/kernel.h> +#include <linux/sched.h> +#include <linux/types.h> +#include <linux/in.h> +#include <linux/string.h> +#include <linux/init.h> +#include <linux/errno.h> +#include <linux/interrupt.h> +#include <linux/netdevice.h> +#include <linux/etherdevice.h> +#include <linux/inetdevice.h> +#include <linux/if_ether.h> +#include <linux/if_arp.h> +#include <linux/skbuff.h> +#include <linux/notifier.h> +#include <linux/bitops.h> +#include <asm/irq.h> +#include <asm/hpsim.h> + +#include "hpsim_ssc.h" + +#define SIMETH_RECV_MAX 10 + +/* + * Maximum possible received frame for Ethernet. + * We preallocate an sk_buff of that size to avoid costly + * memcpy for temporary buffer into sk_buff. We do basically + * what's done in other drivers, like eepro with a ring. + * The difference is, of course, that we don't have real DMA !!! + */ +#define SIMETH_FRAME_SIZE ETH_FRAME_LEN + + +#define NETWORK_INTR 8 + +struct simeth_local { + struct net_device_stats stats; + int simfd; /* descriptor in the simulator */ +}; + +static int simeth_probe1(void); +static int simeth_open(struct net_device *dev); +static int simeth_close(struct net_device *dev); +static int simeth_tx(struct sk_buff *skb, struct net_device *dev); +static int simeth_rx(struct net_device *dev); +static struct net_device_stats *simeth_get_stats(struct net_device *dev); +static irqreturn_t simeth_interrupt(int irq, void *dev_id); +static void set_multicast_list(struct net_device *dev); +static int simeth_device_event(struct notifier_block *this,unsigned long event, void *ptr); + +static char *simeth_version="0.3"; + +/* + * This variable is used to establish a mapping between the Linux/ia64 kernel + * and the host linux kernel. + * + * As of today, we support only one card, even though most of the code + * is ready for many more. The mapping is then: + * linux/ia64 -> linux/x86 + * eth0 -> eth1 + * + * In the future, we some string operations, we could easily support up + * to 10 cards (0-9). + * + * The default mapping can be changed on the kernel command line by + * specifying simeth=ethX (or whatever string you want). + */ +static char *simeth_device="eth0"; /* default host interface to use */ + + + +static volatile unsigned int card_count; /* how many cards "found" so far */ +static int simeth_debug; /* set to 1 to get debug information */ + +/* + * Used to catch IFF_UP & IFF_DOWN events + */ +static struct notifier_block simeth_dev_notifier = { + simeth_device_event, + NULL +}; + + +/* + * Function used when using a kernel command line option. + * + * Format: simeth=interface_name (like eth0) + */ +static int __init +simeth_setup(char *str) +{ + simeth_device = str; + return 1; +} + +__setup("simeth=", simeth_setup); + +/* + * Function used to probe for simeth devices when not installed + * as a loadable module + */ + +int __init +simeth_probe (void) +{ + int r; + + printk(KERN_INFO "simeth: v%s\n", simeth_version); + + r = simeth_probe1(); + + if (r == 0) register_netdevice_notifier(&simeth_dev_notifier); + + return r; +} + +static inline int +netdev_probe(char *name, unsigned char *ether) +{ + return ia64_ssc(__pa(name), __pa(ether), 0,0, SSC_NETDEV_PROBE); +} + + +static inline int +netdev_attach(int fd, int irq, unsigned int ipaddr) +{ + /* this puts the host interface in the right mode (start interrupting) */ + return ia64_ssc(fd, ipaddr, 0,0, SSC_NETDEV_ATTACH); +} + + +static inline int +netdev_detach(int fd) +{ + /* + * inactivate the host interface (don't interrupt anymore) */ + return ia64_ssc(fd, 0,0,0, SSC_NETDEV_DETACH); +} + +static inline int +netdev_send(int fd, unsigned char *buf, unsigned int len) +{ + return ia64_ssc(fd, __pa(buf), len, 0, SSC_NETDEV_SEND); +} + +static inline int +netdev_read(int fd, unsigned char *buf, unsigned int len) +{ + return ia64_ssc(fd, __pa(buf), len, 0, SSC_NETDEV_RECV); +} + +static const struct net_device_ops simeth_netdev_ops = { + .ndo_open = simeth_open, + .ndo_stop = simeth_close, + .ndo_start_xmit = simeth_tx, + .ndo_get_stats = simeth_get_stats, + .ndo_set_rx_mode = set_multicast_list, /* not yet used */ + +}; + +/* + * Function shared with module code, so cannot be in init section + * + * So far this function "detects" only one card (test_&_set) but could + * be extended easily. + * + * Return: + * - -ENODEV is no device found + * - -ENOMEM is no more memory + * - 0 otherwise + */ +static int +simeth_probe1(void) +{ + unsigned char mac_addr[ETH_ALEN]; + struct simeth_local *local; + struct net_device *dev; + int fd, err, rc; + + /* + * XXX Fix me + * let's support just one card for now + */ + if (test_and_set_bit(0, &card_count)) + return -ENODEV; + + /* + * check with the simulator for the device + */ + fd = netdev_probe(simeth_device, mac_addr); + if (fd == -1) + return -ENODEV; + + dev = alloc_etherdev(sizeof(struct simeth_local)); + if (!dev) + return -ENOMEM; + + memcpy(dev->dev_addr, mac_addr, sizeof(mac_addr)); + + local = netdev_priv(dev); + local->simfd = fd; /* keep track of underlying file descriptor */ + + dev->netdev_ops = &simeth_netdev_ops; + + err = register_netdev(dev); + if (err) { + free_netdev(dev); + return err; + } + + /* + * attach the interrupt in the simulator, this does enable interrupts + * until a netdev_attach() is called + */ + if ((rc = hpsim_get_irq(NETWORK_INTR)) < 0) + panic("%s: out of interrupt vectors!\n", __func__); + dev->irq = rc; + + printk(KERN_INFO "%s: hosteth=%s simfd=%d, HwAddr=%pm, IRQ %d\n", + dev->name, simeth_device, local->simfd, dev->dev_addr, dev->irq); + + return 0; +} + +/* + * actually binds the device to an interrupt vector + */ +static int +simeth_open(struct net_device *dev) +{ + if (request_irq(dev->irq, simeth_interrupt, 0, "simeth", dev)) { + printk(KERN_WARNING "simeth: unable to get IRQ %d.\n", dev->irq); + return -EAGAIN; + } + + netif_start_queue(dev); + + return 0; +} + +/* copied from lapbether.c */ +static __inline__ int dev_is_ethdev(struct net_device *dev) +{ + return ( dev->type == ARPHRD_ETHER && strncmp(dev->name, "dummy", 5)); +} + + +/* + * Handler for IFF_UP or IFF_DOWN + * + * The reason for that is that we don't want to be interrupted when the + * interface is down. There is no way to unconnect in the simualtor. Instead + * we use this function to shutdown packet processing in the frame filter + * in the simulator. Thus no interrupts are generated + * + * + * That's also the place where we pass the IP address of this device to the + * simulator so that that we can start filtering packets for it + * + * There may be a better way of doing this, but I don't know which yet. + */ +static int +simeth_device_event(struct notifier_block *this,unsigned long event, void *ptr) +{ + struct net_device *dev = netdev_notifier_info_to_dev(ptr); + struct simeth_local *local; + struct in_device *in_dev; + struct in_ifaddr **ifap = NULL; + struct in_ifaddr *ifa = NULL; + int r; + + + if ( ! dev ) { + printk(KERN_WARNING "simeth_device_event dev=0\n"); + return NOTIFY_DONE; + } + + if (dev_net(dev) != &init_net) + return NOTIFY_DONE; + + if ( event != NETDEV_UP && event != NETDEV_DOWN ) return NOTIFY_DONE; + + /* + * Check whether or not it's for an ethernet device + * + * XXX Fixme: This works only as long as we support one + * type of ethernet device. + */ + if ( !dev_is_ethdev(dev) ) return NOTIFY_DONE; + + if ((in_dev=dev->ip_ptr) != NULL) { + for (ifap=&in_dev->ifa_list; (ifa=*ifap) != NULL; ifap=&ifa->ifa_next) + if (strcmp(dev->name, ifa->ifa_label) == 0) break; + } + if ( ifa == NULL ) { + printk(KERN_ERR "simeth_open: can't find device %s's ifa\n", dev->name); + return NOTIFY_DONE; + } + + printk(KERN_INFO "simeth_device_event: %s ipaddr=0x%x\n", + dev->name, ntohl(ifa->ifa_local)); + + /* + * XXX Fix me + * if the device was up, and we're simply reconfiguring it, not sure + * we get DOWN then UP. + */ + + local = netdev_priv(dev); + /* now do it for real */ + r = event == NETDEV_UP ? + netdev_attach(local->simfd, dev->irq, ntohl(ifa->ifa_local)): + netdev_detach(local->simfd); + + printk(KERN_INFO "simeth: netdev_attach/detach: event=%s ->%d\n", + event == NETDEV_UP ? "attach":"detach", r); + + return NOTIFY_DONE; +} + +static int +simeth_close(struct net_device *dev) +{ + netif_stop_queue(dev); + + free_irq(dev->irq, dev); + + return 0; +} + +/* + * Only used for debug + */ +static void +frame_print(unsigned char *from, unsigned char *frame, int len) +{ + int i; + + printk("%s: (%d) %02x", from, len, frame[0] & 0xff); + for(i=1; i < 6; i++ ) { + printk(":%02x", frame[i] &0xff); + } + printk(" %2x", frame[6] &0xff); + for(i=7; i < 12; i++ ) { + printk(":%02x", frame[i] &0xff); + } + printk(" [%02x%02x]\n", frame[12], frame[13]); + + for(i=14; i < len; i++ ) { + printk("%02x ", frame[i] &0xff); + if ( (i%10)==0) printk("\n"); + } + printk("\n"); +} + + +/* + * Function used to transmit of frame, very last one on the path before + * going to the simulator. + */ +static int +simeth_tx(struct sk_buff *skb, struct net_device *dev) +{ + struct simeth_local *local = netdev_priv(dev); + +#if 0 + /* ensure we have at least ETH_ZLEN bytes (min frame size) */ + unsigned int length = ETH_ZLEN < skb->len ? skb->len : ETH_ZLEN; + /* Where do the extra padding bytes comes from inthe skbuff ? */ +#else + /* the real driver in the host system is going to take care of that + * or maybe it's the NIC itself. + */ + unsigned int length = skb->len; +#endif + + local->stats.tx_bytes += skb->len; + local->stats.tx_packets++; + + + if (simeth_debug > 5) frame_print("simeth_tx", skb->data, length); + + netdev_send(local->simfd, skb->data, length); + + /* + * we are synchronous on write, so we don't simulate a + * trasnmit complete interrupt, thus we don't need to arm a tx + */ + + dev_kfree_skb(skb); + return NETDEV_TX_OK; +} + +static inline struct sk_buff * +make_new_skb(struct net_device *dev) +{ + struct sk_buff *nskb; + + /* + * The +2 is used to make sure that the IP header is nicely + * aligned (on 4byte boundary I assume 14+2=16) + */ + nskb = dev_alloc_skb(SIMETH_FRAME_SIZE + 2); + if ( nskb == NULL ) { + printk(KERN_NOTICE "%s: memory squeeze. dropping packet.\n", dev->name); + return NULL; + } + + skb_reserve(nskb, 2); /* Align IP on 16 byte boundaries */ + + skb_put(nskb,SIMETH_FRAME_SIZE); + + return nskb; +} + +/* + * called from interrupt handler to process a received frame + */ +static int +simeth_rx(struct net_device *dev) +{ + struct simeth_local *local; + struct sk_buff *skb; + int len; + int rcv_count = SIMETH_RECV_MAX; + + local = netdev_priv(dev); + /* + * the loop concept has been borrowed from other drivers + * looks to me like it's a throttling thing to avoid pushing to many + * packets at one time into the stack. Making sure we can process them + * upstream and make forward progress overall + */ + do { + if ( (skb=make_new_skb(dev)) == NULL ) { + printk(KERN_NOTICE "%s: memory squeeze. dropping packet.\n", dev->name); + local->stats.rx_dropped++; + return 0; + } + /* + * Read only one frame at a time + */ + len = netdev_read(local->simfd, skb->data, SIMETH_FRAME_SIZE); + if ( len == 0 ) { + if ( simeth_debug > 0 ) printk(KERN_WARNING "%s: count=%d netdev_read=0\n", + dev->name, SIMETH_RECV_MAX-rcv_count); + break; + } +#if 0 + /* + * XXX Fix me + * Should really do a csum+copy here + */ + skb_copy_to_linear_data(skb, frame, len); +#endif + skb->protocol = eth_type_trans(skb, dev); + + if ( simeth_debug > 6 ) frame_print("simeth_rx", skb->data, len); + + /* + * push the packet up & trigger software interrupt + */ + netif_rx(skb); + + local->stats.rx_packets++; + local->stats.rx_bytes += len; + + } while ( --rcv_count ); + + return len; /* 0 = nothing left to read, otherwise, we can try again */ +} + +/* + * Interrupt handler (Yes, we can do it too !!!) + */ +static irqreturn_t +simeth_interrupt(int irq, void *dev_id) +{ + struct net_device *dev = dev_id; + + /* + * very simple loop because we get interrupts only when receiving + */ + while (simeth_rx(dev)); + return IRQ_HANDLED; +} + +static struct net_device_stats * +simeth_get_stats(struct net_device *dev) +{ + struct simeth_local *local = netdev_priv(dev); + + return &local->stats; +} + +/* fake multicast ability */ +static void +set_multicast_list(struct net_device *dev) +{ + printk(KERN_WARNING "%s: set_multicast_list called\n", dev->name); +} + +__initcall(simeth_probe); diff --git a/kernel/arch/ia64/hp/sim/simscsi.c b/kernel/arch/ia64/hp/sim/simscsi.c new file mode 100644 index 000000000..3a428f19a --- /dev/null +++ b/kernel/arch/ia64/hp/sim/simscsi.c @@ -0,0 +1,380 @@ +/* + * Simulated SCSI driver. + * + * Copyright (C) 1999, 2001-2003 Hewlett-Packard Co + * David Mosberger-Tang <davidm@hpl.hp.com> + * Stephane Eranian <eranian@hpl.hp.com> + * + * 02/01/15 David Mosberger Updated for v2.5.1 + * 99/12/18 David Mosberger Added support for READ10/WRITE10 needed by linux v2.3.33 + */ +#include <linux/blkdev.h> +#include <linux/init.h> +#include <linux/interrupt.h> +#include <linux/kernel.h> +#include <linux/timer.h> +#include <asm/irq.h> +#include "hpsim_ssc.h" + +#include <scsi/scsi.h> +#include <scsi/scsi_cmnd.h> +#include <scsi/scsi_device.h> +#include <scsi/scsi_host.h> + +#define DEBUG_SIMSCSI 0 + +#define SIMSCSI_REQ_QUEUE_LEN 64 +#define DEFAULT_SIMSCSI_ROOT "/var/ski-disks/sd" + +/* Simulator system calls: */ + +#define SSC_OPEN 50 +#define SSC_CLOSE 51 +#define SSC_READ 52 +#define SSC_WRITE 53 +#define SSC_GET_COMPLETION 54 +#define SSC_WAIT_COMPLETION 55 + +#define SSC_WRITE_ACCESS 2 +#define SSC_READ_ACCESS 1 + +#if DEBUG_SIMSCSI + int simscsi_debug; +# define DBG simscsi_debug +#else +# define DBG 0 +#endif + +static struct Scsi_Host *host; + +static void simscsi_interrupt (unsigned long val); +static DECLARE_TASKLET(simscsi_tasklet, simscsi_interrupt, 0); + +struct disk_req { + unsigned long addr; + unsigned len; +}; + +struct disk_stat { + int fd; + unsigned count; +}; + +static int desc[16] = { + -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1 +}; + +static struct queue_entry { + struct scsi_cmnd *sc; +} queue[SIMSCSI_REQ_QUEUE_LEN]; + +static int rd, wr; +static atomic_t num_reqs = ATOMIC_INIT(0); + +/* base name for default disks */ +static char *simscsi_root = DEFAULT_SIMSCSI_ROOT; + +#define MAX_ROOT_LEN 128 + +/* + * used to setup a new base for disk images + * to use /foo/bar/disk[a-z] as disk images + * you have to specify simscsi=/foo/bar/disk on the command line + */ +static int __init +simscsi_setup (char *s) +{ + /* XXX Fix me we may need to strcpy() ? */ + if (strlen(s) > MAX_ROOT_LEN) { + printk(KERN_ERR "simscsi_setup: prefix too long---using default %s\n", + simscsi_root); + } else + simscsi_root = s; + return 1; +} + +__setup("simscsi=", simscsi_setup); + +static void +simscsi_interrupt (unsigned long val) +{ + struct scsi_cmnd *sc; + + while ((sc = queue[rd].sc) != NULL) { + atomic_dec(&num_reqs); + queue[rd].sc = NULL; + if (DBG) + printk("simscsi_interrupt: done with %ld\n", sc->serial_number); + (*sc->scsi_done)(sc); + rd = (rd + 1) % SIMSCSI_REQ_QUEUE_LEN; + } +} + +static int +simscsi_biosparam (struct scsi_device *sdev, struct block_device *n, + sector_t capacity, int ip[]) +{ + ip[0] = 64; /* heads */ + ip[1] = 32; /* sectors */ + ip[2] = capacity >> 11; /* cylinders */ + return 0; +} + +static void +simscsi_sg_readwrite (struct scsi_cmnd *sc, int mode, unsigned long offset) +{ + int i; + struct scatterlist *sl; + struct disk_stat stat; + struct disk_req req; + + stat.fd = desc[sc->device->id]; + + scsi_for_each_sg(sc, sl, scsi_sg_count(sc), i) { + req.addr = __pa(sg_virt(sl)); + req.len = sl->length; + if (DBG) + printk("simscsi_sg_%s @ %lx (off %lx) use_sg=%d len=%d\n", + mode == SSC_READ ? "read":"write", req.addr, offset, + scsi_sg_count(sc) - i, sl->length); + ia64_ssc(stat.fd, 1, __pa(&req), offset, mode); + ia64_ssc(__pa(&stat), 0, 0, 0, SSC_WAIT_COMPLETION); + + /* should not happen in our case */ + if (stat.count != req.len) { + sc->result = DID_ERROR << 16; + return; + } + offset += sl->length; + } + sc->result = GOOD; +} + +/* + * function handling both READ_6/WRITE_6 (non-scatter/gather mode) + * commands. + * Added 02/26/99 S.Eranian + */ +static void +simscsi_readwrite6 (struct scsi_cmnd *sc, int mode) +{ + unsigned long offset; + + offset = (((sc->cmnd[1] & 0x1f) << 16) | (sc->cmnd[2] << 8) | sc->cmnd[3])*512; + simscsi_sg_readwrite(sc, mode, offset); +} + +static size_t +simscsi_get_disk_size (int fd) +{ + struct disk_stat stat; + size_t bit, sectors = 0; + struct disk_req req; + char buf[512]; + + /* + * This is a bit kludgey: the simulator doesn't provide a + * direct way of determining the disk size, so we do a binary + * search, assuming a maximum disk size of 128GB. + */ + for (bit = (128UL << 30)/512; bit != 0; bit >>= 1) { + req.addr = __pa(&buf); + req.len = sizeof(buf); + ia64_ssc(fd, 1, __pa(&req), ((sectors | bit) - 1)*512, SSC_READ); + stat.fd = fd; + ia64_ssc(__pa(&stat), 0, 0, 0, SSC_WAIT_COMPLETION); + if (stat.count == sizeof(buf)) + sectors |= bit; + } + return sectors - 1; /* return last valid sector number */ +} + +static void +simscsi_readwrite10 (struct scsi_cmnd *sc, int mode) +{ + unsigned long offset; + + offset = (((unsigned long)sc->cmnd[2] << 24) + | ((unsigned long)sc->cmnd[3] << 16) + | ((unsigned long)sc->cmnd[4] << 8) + | ((unsigned long)sc->cmnd[5] << 0))*512UL; + simscsi_sg_readwrite(sc, mode, offset); +} + +static int +simscsi_queuecommand_lck (struct scsi_cmnd *sc, void (*done)(struct scsi_cmnd *)) +{ + unsigned int target_id = sc->device->id; + char fname[MAX_ROOT_LEN+16]; + size_t disk_size; + char *buf; + char localbuf[36]; +#if DEBUG_SIMSCSI + register long sp asm ("sp"); + + if (DBG) + printk("simscsi_queuecommand: target=%d,cmnd=%u,sc=%lu,sp=%lx,done=%p\n", + target_id, sc->cmnd[0], sc->serial_number, sp, done); +#endif + + sc->result = DID_BAD_TARGET << 16; + sc->scsi_done = done; + if (target_id <= 15 && sc->device->lun == 0) { + switch (sc->cmnd[0]) { + case INQUIRY: + if (scsi_bufflen(sc) < 35) { + break; + } + sprintf (fname, "%s%c", simscsi_root, 'a' + target_id); + desc[target_id] = ia64_ssc(__pa(fname), SSC_READ_ACCESS|SSC_WRITE_ACCESS, + 0, 0, SSC_OPEN); + if (desc[target_id] < 0) { + /* disk doesn't exist... */ + break; + } + buf = localbuf; + buf[0] = 0; /* magnetic disk */ + buf[1] = 0; /* not a removable medium */ + buf[2] = 2; /* SCSI-2 compliant device */ + buf[3] = 2; /* SCSI-2 response data format */ + buf[4] = 31; /* additional length (bytes) */ + buf[5] = 0; /* reserved */ + buf[6] = 0; /* reserved */ + buf[7] = 0; /* various flags */ + memcpy(buf + 8, "HP SIMULATED DISK 0.00", 28); + scsi_sg_copy_from_buffer(sc, buf, 36); + sc->result = GOOD; + break; + + case TEST_UNIT_READY: + sc->result = GOOD; + break; + + case READ_6: + if (desc[target_id] < 0 ) + break; + simscsi_readwrite6(sc, SSC_READ); + break; + + case READ_10: + if (desc[target_id] < 0 ) + break; + simscsi_readwrite10(sc, SSC_READ); + break; + + case WRITE_6: + if (desc[target_id] < 0) + break; + simscsi_readwrite6(sc, SSC_WRITE); + break; + + case WRITE_10: + if (desc[target_id] < 0) + break; + simscsi_readwrite10(sc, SSC_WRITE); + break; + + case READ_CAPACITY: + if (desc[target_id] < 0 || scsi_bufflen(sc) < 8) { + break; + } + buf = localbuf; + disk_size = simscsi_get_disk_size(desc[target_id]); + + buf[0] = (disk_size >> 24) & 0xff; + buf[1] = (disk_size >> 16) & 0xff; + buf[2] = (disk_size >> 8) & 0xff; + buf[3] = (disk_size >> 0) & 0xff; + /* set block size of 512 bytes: */ + buf[4] = 0; + buf[5] = 0; + buf[6] = 2; + buf[7] = 0; + scsi_sg_copy_from_buffer(sc, buf, 8); + sc->result = GOOD; + break; + + case MODE_SENSE: + case MODE_SENSE_10: + /* sd.c uses this to determine whether disk does write-caching. */ + scsi_sg_copy_from_buffer(sc, (char *)empty_zero_page, + PAGE_SIZE); + sc->result = GOOD; + break; + + case START_STOP: + printk(KERN_ERR "START_STOP\n"); + break; + + default: + panic("simscsi: unknown SCSI command %u\n", sc->cmnd[0]); + } + } + if (sc->result == DID_BAD_TARGET) { + sc->result |= DRIVER_SENSE << 24; + sc->sense_buffer[0] = 0x70; + sc->sense_buffer[2] = 0x00; + } + if (atomic_read(&num_reqs) >= SIMSCSI_REQ_QUEUE_LEN) { + panic("Attempt to queue command while command is pending!!"); + } + atomic_inc(&num_reqs); + queue[wr].sc = sc; + wr = (wr + 1) % SIMSCSI_REQ_QUEUE_LEN; + + tasklet_schedule(&simscsi_tasklet); + return 0; +} + +static DEF_SCSI_QCMD(simscsi_queuecommand) + +static int +simscsi_host_reset (struct scsi_cmnd *sc) +{ + printk(KERN_ERR "simscsi_host_reset: not implemented\n"); + return 0; +} + +static struct scsi_host_template driver_template = { + .name = "simulated SCSI host adapter", + .proc_name = "simscsi", + .queuecommand = simscsi_queuecommand, + .eh_host_reset_handler = simscsi_host_reset, + .bios_param = simscsi_biosparam, + .can_queue = SIMSCSI_REQ_QUEUE_LEN, + .this_id = -1, + .sg_tablesize = SG_ALL, + .max_sectors = 1024, + .cmd_per_lun = SIMSCSI_REQ_QUEUE_LEN, + .use_clustering = DISABLE_CLUSTERING, +}; + +static int __init +simscsi_init(void) +{ + int error; + + host = scsi_host_alloc(&driver_template, 0); + if (!host) + return -ENOMEM; + + error = scsi_add_host(host, NULL); + if (error) + goto free_host; + scsi_scan_host(host); + return 0; + + free_host: + scsi_host_put(host); + return error; +} + +static void __exit +simscsi_exit(void) +{ + scsi_remove_host(host); + scsi_host_put(host); +} + +module_init(simscsi_init); +module_exit(simscsi_exit); diff --git a/kernel/arch/ia64/hp/sim/simserial.c b/kernel/arch/ia64/hp/sim/simserial.c new file mode 100644 index 000000000..e70cadec7 --- /dev/null +++ b/kernel/arch/ia64/hp/sim/simserial.c @@ -0,0 +1,545 @@ +/* + * Simulated Serial Driver (fake serial) + * + * This driver is mostly used for bringup purposes and will go away. + * It has a strong dependency on the system console. All outputs + * are rerouted to the same facility as the one used by printk which, in our + * case means sys_sim.c console (goes via the simulator). + * + * Copyright (C) 1999-2000, 2002-2003 Hewlett-Packard Co + * Stephane Eranian <eranian@hpl.hp.com> + * David Mosberger-Tang <davidm@hpl.hp.com> + */ + +#include <linux/init.h> +#include <linux/errno.h> +#include <linux/sched.h> +#include <linux/tty.h> +#include <linux/tty_flip.h> +#include <linux/major.h> +#include <linux/fcntl.h> +#include <linux/mm.h> +#include <linux/seq_file.h> +#include <linux/slab.h> +#include <linux/capability.h> +#include <linux/circ_buf.h> +#include <linux/console.h> +#include <linux/irq.h> +#include <linux/module.h> +#include <linux/serial.h> +#include <linux/sysrq.h> +#include <linux/uaccess.h> + +#include <asm/hpsim.h> + +#include "hpsim_ssc.h" + +#undef SIMSERIAL_DEBUG /* define this to get some debug information */ + +#define KEYBOARD_INTR 3 /* must match with simulator! */ + +#define NR_PORTS 1 /* only one port for now */ + +struct serial_state { + struct tty_port port; + struct circ_buf xmit; + int irq; + int x_char; +}; + +static struct serial_state rs_table[NR_PORTS]; + +struct tty_driver *hp_simserial_driver; + +static struct console *console; + +static void receive_chars(struct tty_port *port) +{ + unsigned char ch; + static unsigned char seen_esc = 0; + + while ( (ch = ia64_ssc(0, 0, 0, 0, SSC_GETCHAR)) ) { + if (ch == 27 && seen_esc == 0) { + seen_esc = 1; + continue; + } else if (seen_esc == 1 && ch == 'O') { + seen_esc = 2; + continue; + } else if (seen_esc == 2) { + if (ch == 'P') /* F1 */ + show_state(); +#ifdef CONFIG_MAGIC_SYSRQ + if (ch == 'S') { /* F4 */ + do { + ch = ia64_ssc(0, 0, 0, 0, SSC_GETCHAR); + } while (!ch); + handle_sysrq(ch); + } +#endif + seen_esc = 0; + continue; + } + seen_esc = 0; + + if (tty_insert_flip_char(port, ch, TTY_NORMAL) == 0) + break; + } + tty_flip_buffer_push(port); +} + +/* + * This is the serial driver's interrupt routine for a single port + */ +static irqreturn_t rs_interrupt_single(int irq, void *dev_id) +{ + struct serial_state *info = dev_id; + + receive_chars(&info->port); + + return IRQ_HANDLED; +} + +/* + * ------------------------------------------------------------------- + * Here ends the serial interrupt routines. + * ------------------------------------------------------------------- + */ + +static int rs_put_char(struct tty_struct *tty, unsigned char ch) +{ + struct serial_state *info = tty->driver_data; + unsigned long flags; + + if (!info->xmit.buf) + return 0; + + local_irq_save(flags); + if (CIRC_SPACE(info->xmit.head, info->xmit.tail, SERIAL_XMIT_SIZE) == 0) { + local_irq_restore(flags); + return 0; + } + info->xmit.buf[info->xmit.head] = ch; + info->xmit.head = (info->xmit.head + 1) & (SERIAL_XMIT_SIZE-1); + local_irq_restore(flags); + return 1; +} + +static void transmit_chars(struct tty_struct *tty, struct serial_state *info, + int *intr_done) +{ + int count; + unsigned long flags; + + local_irq_save(flags); + + if (info->x_char) { + char c = info->x_char; + + console->write(console, &c, 1); + + info->x_char = 0; + + goto out; + } + + if (info->xmit.head == info->xmit.tail || tty->stopped) { +#ifdef SIMSERIAL_DEBUG + printk("transmit_chars: head=%d, tail=%d, stopped=%d\n", + info->xmit.head, info->xmit.tail, tty->stopped); +#endif + goto out; + } + /* + * We removed the loop and try to do it in to chunks. We need + * 2 operations maximum because it's a ring buffer. + * + * First from current to tail if possible. + * Then from the beginning of the buffer until necessary + */ + + count = min(CIRC_CNT(info->xmit.head, info->xmit.tail, SERIAL_XMIT_SIZE), + SERIAL_XMIT_SIZE - info->xmit.tail); + console->write(console, info->xmit.buf+info->xmit.tail, count); + + info->xmit.tail = (info->xmit.tail+count) & (SERIAL_XMIT_SIZE-1); + + /* + * We have more at the beginning of the buffer + */ + count = CIRC_CNT(info->xmit.head, info->xmit.tail, SERIAL_XMIT_SIZE); + if (count) { + console->write(console, info->xmit.buf, count); + info->xmit.tail += count; + } +out: + local_irq_restore(flags); +} + +static void rs_flush_chars(struct tty_struct *tty) +{ + struct serial_state *info = tty->driver_data; + + if (info->xmit.head == info->xmit.tail || tty->stopped || + !info->xmit.buf) + return; + + transmit_chars(tty, info, NULL); +} + +static int rs_write(struct tty_struct * tty, + const unsigned char *buf, int count) +{ + struct serial_state *info = tty->driver_data; + int c, ret = 0; + unsigned long flags; + + if (!info->xmit.buf) + return 0; + + local_irq_save(flags); + while (1) { + c = CIRC_SPACE_TO_END(info->xmit.head, info->xmit.tail, SERIAL_XMIT_SIZE); + if (count < c) + c = count; + if (c <= 0) { + break; + } + memcpy(info->xmit.buf + info->xmit.head, buf, c); + info->xmit.head = ((info->xmit.head + c) & + (SERIAL_XMIT_SIZE-1)); + buf += c; + count -= c; + ret += c; + } + local_irq_restore(flags); + /* + * Hey, we transmit directly from here in our case + */ + if (CIRC_CNT(info->xmit.head, info->xmit.tail, SERIAL_XMIT_SIZE) && + !tty->stopped) + transmit_chars(tty, info, NULL); + + return ret; +} + +static int rs_write_room(struct tty_struct *tty) +{ + struct serial_state *info = tty->driver_data; + + return CIRC_SPACE(info->xmit.head, info->xmit.tail, SERIAL_XMIT_SIZE); +} + +static int rs_chars_in_buffer(struct tty_struct *tty) +{ + struct serial_state *info = tty->driver_data; + + return CIRC_CNT(info->xmit.head, info->xmit.tail, SERIAL_XMIT_SIZE); +} + +static void rs_flush_buffer(struct tty_struct *tty) +{ + struct serial_state *info = tty->driver_data; + unsigned long flags; + + local_irq_save(flags); + info->xmit.head = info->xmit.tail = 0; + local_irq_restore(flags); + + tty_wakeup(tty); +} + +/* + * This function is used to send a high-priority XON/XOFF character to + * the device + */ +static void rs_send_xchar(struct tty_struct *tty, char ch) +{ + struct serial_state *info = tty->driver_data; + + info->x_char = ch; + if (ch) { + /* + * I guess we could call console->write() directly but + * let's do that for now. + */ + transmit_chars(tty, info, NULL); + } +} + +/* + * ------------------------------------------------------------ + * rs_throttle() + * + * This routine is called by the upper-layer tty layer to signal that + * incoming characters should be throttled. + * ------------------------------------------------------------ + */ +static void rs_throttle(struct tty_struct * tty) +{ + if (I_IXOFF(tty)) + rs_send_xchar(tty, STOP_CHAR(tty)); + + printk(KERN_INFO "simrs_throttle called\n"); +} + +static void rs_unthrottle(struct tty_struct * tty) +{ + struct serial_state *info = tty->driver_data; + + if (I_IXOFF(tty)) { + if (info->x_char) + info->x_char = 0; + else + rs_send_xchar(tty, START_CHAR(tty)); + } + printk(KERN_INFO "simrs_unthrottle called\n"); +} + +static int rs_ioctl(struct tty_struct *tty, unsigned int cmd, unsigned long arg) +{ + if ((cmd != TIOCGSERIAL) && (cmd != TIOCSSERIAL) && + (cmd != TIOCSERCONFIG) && (cmd != TIOCSERGSTRUCT) && + (cmd != TIOCMIWAIT)) { + if (tty->flags & (1 << TTY_IO_ERROR)) + return -EIO; + } + + switch (cmd) { + case TIOCGSERIAL: + case TIOCSSERIAL: + case TIOCSERGSTRUCT: + case TIOCMIWAIT: + return 0; + case TIOCSERCONFIG: + case TIOCSERGETLSR: /* Get line status register */ + return -EINVAL; + case TIOCSERGWILD: + case TIOCSERSWILD: + /* "setserial -W" is called in Debian boot */ + printk (KERN_INFO "TIOCSER?WILD ioctl obsolete, ignored.\n"); + return 0; + } + return -ENOIOCTLCMD; +} + +#define RELEVANT_IFLAG(iflag) (iflag & (IGNBRK|BRKINT|IGNPAR|PARMRK|INPCK)) + +/* + * This routine will shutdown a serial port; interrupts are disabled, and + * DTR is dropped if the hangup on close termio flag is on. + */ +static void shutdown(struct tty_port *port) +{ + struct serial_state *info = container_of(port, struct serial_state, + port); + unsigned long flags; + + local_irq_save(flags); + if (info->irq) + free_irq(info->irq, info); + + if (info->xmit.buf) { + free_page((unsigned long) info->xmit.buf); + info->xmit.buf = NULL; + } + local_irq_restore(flags); +} + +static void rs_close(struct tty_struct *tty, struct file * filp) +{ + struct serial_state *info = tty->driver_data; + + tty_port_close(&info->port, tty, filp); +} + +static void rs_hangup(struct tty_struct *tty) +{ + struct serial_state *info = tty->driver_data; + + rs_flush_buffer(tty); + tty_port_hangup(&info->port); +} + +static int activate(struct tty_port *port, struct tty_struct *tty) +{ + struct serial_state *state = container_of(port, struct serial_state, + port); + unsigned long flags, page; + int retval = 0; + + page = get_zeroed_page(GFP_KERNEL); + if (!page) + return -ENOMEM; + + local_irq_save(flags); + + if (state->xmit.buf) + free_page(page); + else + state->xmit.buf = (unsigned char *) page; + + if (state->irq) { + retval = request_irq(state->irq, rs_interrupt_single, 0, + "simserial", state); + if (retval) + goto errout; + } + + state->xmit.head = state->xmit.tail = 0; + + /* + * Set up the tty->alt_speed kludge + */ + if ((port->flags & ASYNC_SPD_MASK) == ASYNC_SPD_HI) + tty->alt_speed = 57600; + if ((port->flags & ASYNC_SPD_MASK) == ASYNC_SPD_VHI) + tty->alt_speed = 115200; + if ((port->flags & ASYNC_SPD_MASK) == ASYNC_SPD_SHI) + tty->alt_speed = 230400; + if ((port->flags & ASYNC_SPD_MASK) == ASYNC_SPD_WARP) + tty->alt_speed = 460800; + +errout: + local_irq_restore(flags); + return retval; +} + + +/* + * This routine is called whenever a serial port is opened. It + * enables interrupts for a serial port, linking in its async structure into + * the IRQ chain. It also performs the serial-specific + * initialization for the tty structure. + */ +static int rs_open(struct tty_struct *tty, struct file * filp) +{ + struct serial_state *info = rs_table + tty->index; + struct tty_port *port = &info->port; + + tty->driver_data = info; + port->low_latency = (port->flags & ASYNC_LOW_LATENCY) ? 1 : 0; + + /* + * figure out which console to use (should be one already) + */ + console = console_drivers; + while (console) { + if ((console->flags & CON_ENABLED) && console->write) break; + console = console->next; + } + + return tty_port_open(port, tty, filp); +} + +/* + * /proc fs routines.... + */ + +static int rs_proc_show(struct seq_file *m, void *v) +{ + int i; + + seq_printf(m, "simserinfo:1.0\n"); + for (i = 0; i < NR_PORTS; i++) + seq_printf(m, "%d: uart:16550 port:3F8 irq:%d\n", + i, rs_table[i].irq); + return 0; +} + +static int rs_proc_open(struct inode *inode, struct file *file) +{ + return single_open(file, rs_proc_show, NULL); +} + +static const struct file_operations rs_proc_fops = { + .owner = THIS_MODULE, + .open = rs_proc_open, + .read = seq_read, + .llseek = seq_lseek, + .release = single_release, +}; + +static const struct tty_operations hp_ops = { + .open = rs_open, + .close = rs_close, + .write = rs_write, + .put_char = rs_put_char, + .flush_chars = rs_flush_chars, + .write_room = rs_write_room, + .chars_in_buffer = rs_chars_in_buffer, + .flush_buffer = rs_flush_buffer, + .ioctl = rs_ioctl, + .throttle = rs_throttle, + .unthrottle = rs_unthrottle, + .send_xchar = rs_send_xchar, + .hangup = rs_hangup, + .proc_fops = &rs_proc_fops, +}; + +static const struct tty_port_operations hp_port_ops = { + .activate = activate, + .shutdown = shutdown, +}; + +static int __init simrs_init(void) +{ + struct serial_state *state; + int retval; + + if (!ia64_platform_is("hpsim")) + return -ENODEV; + + hp_simserial_driver = alloc_tty_driver(NR_PORTS); + if (!hp_simserial_driver) + return -ENOMEM; + + printk(KERN_INFO "SimSerial driver with no serial options enabled\n"); + + /* Initialize the tty_driver structure */ + + hp_simserial_driver->driver_name = "simserial"; + hp_simserial_driver->name = "ttyS"; + hp_simserial_driver->major = TTY_MAJOR; + hp_simserial_driver->minor_start = 64; + hp_simserial_driver->type = TTY_DRIVER_TYPE_SERIAL; + hp_simserial_driver->subtype = SERIAL_TYPE_NORMAL; + hp_simserial_driver->init_termios = tty_std_termios; + hp_simserial_driver->init_termios.c_cflag = + B9600 | CS8 | CREAD | HUPCL | CLOCAL; + hp_simserial_driver->flags = TTY_DRIVER_REAL_RAW; + tty_set_operations(hp_simserial_driver, &hp_ops); + + state = rs_table; + tty_port_init(&state->port); + state->port.ops = &hp_port_ops; + state->port.close_delay = 0; /* XXX really 0? */ + + retval = hpsim_get_irq(KEYBOARD_INTR); + if (retval < 0) { + printk(KERN_ERR "%s: out of interrupt vectors!\n", + __func__); + goto err_free_tty; + } + + state->irq = retval; + + /* the port is imaginary */ + printk(KERN_INFO "ttyS0 at 0x03f8 (irq = %d) is a 16550\n", state->irq); + + tty_port_link_device(&state->port, hp_simserial_driver, 0); + retval = tty_register_driver(hp_simserial_driver); + if (retval) { + printk(KERN_ERR "Couldn't register simserial driver\n"); + goto err_free_tty; + } + + return 0; +err_free_tty: + put_tty_driver(hp_simserial_driver); + tty_port_destroy(&state->port); + return retval; +} + +#ifndef MODULE +__initcall(simrs_init); +#endif diff --git a/kernel/arch/ia64/hp/zx1/Makefile b/kernel/arch/ia64/hp/zx1/Makefile new file mode 100644 index 000000000..61e878729 --- /dev/null +++ b/kernel/arch/ia64/hp/zx1/Makefile @@ -0,0 +1,8 @@ +# +# ia64/hp/zx1/Makefile +# +# Copyright (C) 2002 Hewlett Packard +# Copyright (C) Alex Williamson (alex_williamson@hp.com) +# + +obj-$(CONFIG_IA64_GENERIC) += hpzx1_machvec.o hpzx1_swiotlb_machvec.o diff --git a/kernel/arch/ia64/hp/zx1/hpzx1_machvec.c b/kernel/arch/ia64/hp/zx1/hpzx1_machvec.c new file mode 100644 index 000000000..32518b0f9 --- /dev/null +++ b/kernel/arch/ia64/hp/zx1/hpzx1_machvec.c @@ -0,0 +1,3 @@ +#define MACHVEC_PLATFORM_NAME hpzx1 +#define MACHVEC_PLATFORM_HEADER <asm/machvec_hpzx1.h> +#include <asm/machvec_init.h> diff --git a/kernel/arch/ia64/hp/zx1/hpzx1_swiotlb_machvec.c b/kernel/arch/ia64/hp/zx1/hpzx1_swiotlb_machvec.c new file mode 100644 index 000000000..4392a96b3 --- /dev/null +++ b/kernel/arch/ia64/hp/zx1/hpzx1_swiotlb_machvec.c @@ -0,0 +1,3 @@ +#define MACHVEC_PLATFORM_NAME hpzx1_swiotlb +#define MACHVEC_PLATFORM_HEADER <asm/machvec_hpzx1_swiotlb.h> +#include <asm/machvec_init.h> |