summaryrefslogtreecommitdiffstats
path: root/kernel/arch/ia64/Kconfig
diff options
context:
space:
mode:
Diffstat (limited to 'kernel/arch/ia64/Kconfig')
-rw-r--r--kernel/arch/ia64/Kconfig638
1 files changed, 638 insertions, 0 deletions
diff --git a/kernel/arch/ia64/Kconfig b/kernel/arch/ia64/Kconfig
new file mode 100644
index 000000000..76d25b2cf
--- /dev/null
+++ b/kernel/arch/ia64/Kconfig
@@ -0,0 +1,638 @@
+config PGTABLE_LEVELS
+ int "Page Table Levels" if !IA64_PAGE_SIZE_64KB
+ range 3 4 if !IA64_PAGE_SIZE_64KB
+ default 3
+
+source "init/Kconfig"
+
+source "kernel/Kconfig.freezer"
+
+menu "Processor type and features"
+
+config IA64
+ bool
+ select ARCH_MIGHT_HAVE_PC_PARPORT
+ select ARCH_MIGHT_HAVE_PC_SERIO
+ select PCI if (!IA64_HP_SIM)
+ select ACPI if (!IA64_HP_SIM)
+ select ACPI_SYSTEM_POWER_STATES_SUPPORT if ACPI
+ select ARCH_MIGHT_HAVE_ACPI_PDC if ACPI
+ select HAVE_UNSTABLE_SCHED_CLOCK
+ select HAVE_IDE
+ select HAVE_OPROFILE
+ select HAVE_KPROBES
+ select HAVE_KRETPROBES
+ select HAVE_FTRACE_MCOUNT_RECORD
+ select HAVE_DYNAMIC_FTRACE if (!ITANIUM)
+ select HAVE_FUNCTION_TRACER
+ select HAVE_DMA_ATTRS
+ select TTY
+ select HAVE_ARCH_TRACEHOOK
+ select HAVE_DMA_API_DEBUG
+ select HAVE_MEMBLOCK
+ select HAVE_MEMBLOCK_NODE_MAP
+ select HAVE_VIRT_CPU_ACCOUNTING
+ select ARCH_HAS_SG_CHAIN
+ select VIRT_TO_BUS
+ select ARCH_DISCARD_MEMBLOCK
+ select GENERIC_IRQ_PROBE
+ select GENERIC_PENDING_IRQ if SMP
+ select GENERIC_IRQ_SHOW
+ select GENERIC_IRQ_LEGACY
+ select ARCH_WANT_OPTIONAL_GPIOLIB
+ select ARCH_HAVE_NMI_SAFE_CMPXCHG
+ select GENERIC_IOMAP
+ select GENERIC_SMP_IDLE_THREAD
+ select ARCH_INIT_TASK
+ select ARCH_TASK_STRUCT_ALLOCATOR
+ select ARCH_THREAD_INFO_ALLOCATOR
+ select ARCH_CLOCKSOURCE_DATA
+ select GENERIC_TIME_VSYSCALL_OLD
+ select SYSCTL_ARCH_UNALIGN_NO_WARN
+ select HAVE_MOD_ARCH_SPECIFIC
+ select MODULES_USE_ELF_RELA
+ select ARCH_USE_CMPXCHG_LOCKREF
+ select HAVE_ARCH_AUDITSYSCALL
+ default y
+ help
+ The Itanium Processor Family is Intel's 64-bit successor to
+ the 32-bit X86 line. The IA-64 Linux project has a home
+ page at <http://www.linuxia64.org/> and a mailing list at
+ <linux-ia64@vger.kernel.org>.
+
+config 64BIT
+ bool
+ select ATA_NONSTANDARD if ATA
+ default y
+
+config ZONE_DMA
+ def_bool y
+ depends on !IA64_SGI_SN2
+
+config QUICKLIST
+ bool
+ default y
+
+config MMU
+ bool
+ default y
+
+config ARCH_DMA_ADDR_T_64BIT
+ def_bool y
+
+config NEED_DMA_MAP_STATE
+ def_bool y
+
+config NEED_SG_DMA_LENGTH
+ def_bool y
+
+config SWIOTLB
+ bool
+
+config STACKTRACE_SUPPORT
+ def_bool y
+
+config GENERIC_LOCKBREAK
+ def_bool n
+
+config RWSEM_XCHGADD_ALGORITHM
+ bool
+ default y
+
+config HUGETLB_PAGE_SIZE_VARIABLE
+ bool
+ depends on HUGETLB_PAGE
+ default y
+
+config GENERIC_CALIBRATE_DELAY
+ bool
+ default y
+
+config HAVE_SETUP_PER_CPU_AREA
+ def_bool y
+
+config DMI
+ bool
+ default y
+ select DMI_SCAN_MACHINE_NON_EFI_FALLBACK
+
+config EFI
+ bool
+ select UCS2_STRING
+ default y
+
+config SCHED_OMIT_FRAME_POINTER
+ bool
+ default y
+
+config IA64_UNCACHED_ALLOCATOR
+ bool
+ select GENERIC_ALLOCATOR
+
+config ARCH_USES_PG_UNCACHED
+ def_bool y
+ depends on IA64_UNCACHED_ALLOCATOR
+
+config AUDIT_ARCH
+ bool
+ default y
+
+menuconfig PARAVIRT_GUEST
+ bool "Paravirtualized guest support"
+ depends on BROKEN
+ help
+ Say Y here to get to see options related to running Linux under
+ various hypervisors. This option alone does not add any kernel code.
+
+ If you say N, all options in this submenu will be skipped and disabled.
+
+if PARAVIRT_GUEST
+
+config PARAVIRT
+ bool "Enable paravirtualization code"
+ depends on PARAVIRT_GUEST
+ default y
+ help
+ This changes the kernel so it can modify itself when it is run
+ under a hypervisor, potentially improving performance significantly
+ over full virtualization. However, when run without a hypervisor
+ the kernel is theoretically slower and slightly larger.
+
+endif
+
+choice
+ prompt "System type"
+ default IA64_GENERIC
+
+config IA64_GENERIC
+ bool "generic"
+ select NUMA
+ select ACPI_NUMA
+ select SWIOTLB
+ select PCI_MSI
+ help
+ This selects the system type of your hardware. A "generic" kernel
+ will run on any supported IA-64 system. However, if you configure
+ a kernel for your specific system, it will be faster and smaller.
+
+ generic For any supported IA-64 system
+ DIG-compliant For DIG ("Developer's Interface Guide") compliant systems
+ DIG+Intel+IOMMU For DIG systems with Intel IOMMU
+ HP-zx1/sx1000 For HP systems
+ HP-zx1/sx1000+swiotlb For HP systems with (broken) DMA-constrained devices.
+ SGI-SN2 For SGI Altix systems
+ SGI-UV For SGI UV systems
+ Ski-simulator For the HP simulator <http://www.hpl.hp.com/research/linux/ski/>
+
+ If you don't know what to do, choose "generic".
+
+config IA64_DIG
+ bool "DIG-compliant"
+ select SWIOTLB
+
+config IA64_DIG_VTD
+ bool "DIG+Intel+IOMMU"
+ select INTEL_IOMMU
+ select PCI_MSI
+
+config IA64_HP_ZX1
+ bool "HP-zx1/sx1000"
+ help
+ Build a kernel that runs on HP zx1 and sx1000 systems. This adds
+ support for the HP I/O MMU.
+
+config IA64_HP_ZX1_SWIOTLB
+ bool "HP-zx1/sx1000 with software I/O TLB"
+ select SWIOTLB
+ help
+ Build a kernel that runs on HP zx1 and sx1000 systems even when they
+ have broken PCI devices which cannot DMA to full 32 bits. Apart
+ from support for the HP I/O MMU, this includes support for the software
+ I/O TLB, which allows supporting the broken devices at the expense of
+ wasting some kernel memory (about 2MB by default).
+
+config IA64_SGI_SN2
+ bool "SGI-SN2"
+ select NUMA
+ select ACPI_NUMA
+ help
+ Selecting this option will optimize the kernel for use on sn2 based
+ systems, but the resulting kernel binary will not run on other
+ types of ia64 systems. If you have an SGI Altix system, it's safe
+ to select this option. If in doubt, select ia64 generic support
+ instead.
+
+config IA64_SGI_UV
+ bool "SGI-UV"
+ select NUMA
+ select ACPI_NUMA
+ select SWIOTLB
+ help
+ Selecting this option will optimize the kernel for use on UV based
+ systems, but the resulting kernel binary will not run on other
+ types of ia64 systems. If you have an SGI UV system, it's safe
+ to select this option. If in doubt, select ia64 generic support
+ instead.
+
+config IA64_HP_SIM
+ bool "Ski-simulator"
+ select SWIOTLB
+ depends on !PM
+
+endchoice
+
+choice
+ prompt "Processor type"
+ default ITANIUM
+
+config ITANIUM
+ bool "Itanium"
+ help
+ Select your IA-64 processor type. The default is Itanium.
+ This choice is safe for all IA-64 systems, but may not perform
+ optimally on systems with, say, Itanium 2 or newer processors.
+
+config MCKINLEY
+ bool "Itanium 2"
+ help
+ Select this to configure for an Itanium 2 (McKinley) processor.
+
+endchoice
+
+choice
+ prompt "Kernel page size"
+ default IA64_PAGE_SIZE_16KB
+
+config IA64_PAGE_SIZE_4KB
+ bool "4KB"
+ help
+ This lets you select the page size of the kernel. For best IA-64
+ performance, a page size of 8KB or 16KB is recommended. For best
+ IA-32 compatibility, a page size of 4KB should be selected (the vast
+ majority of IA-32 binaries work perfectly fine with a larger page
+ size). For Itanium 2 or newer systems, a page size of 64KB can also
+ be selected.
+
+ 4KB For best IA-32 compatibility
+ 8KB For best IA-64 performance
+ 16KB For best IA-64 performance
+ 64KB Requires Itanium 2 or newer processor.
+
+ If you don't know what to do, choose 16KB.
+
+config IA64_PAGE_SIZE_8KB
+ bool "8KB"
+
+config IA64_PAGE_SIZE_16KB
+ bool "16KB"
+
+config IA64_PAGE_SIZE_64KB
+ depends on !ITANIUM
+ bool "64KB"
+
+endchoice
+
+if IA64_HP_SIM
+config HZ
+ default 32
+endif
+
+if !IA64_HP_SIM
+source kernel/Kconfig.hz
+endif
+
+config IA64_BRL_EMU
+ bool
+ depends on ITANIUM
+ default y
+
+# align cache-sensitive data to 128 bytes
+config IA64_L1_CACHE_SHIFT
+ int
+ default "7" if MCKINLEY
+ default "6" if ITANIUM
+
+config IA64_CYCLONE
+ bool "Cyclone (EXA) Time Source support"
+ help
+ Say Y here to enable support for IBM EXA Cyclone time source.
+ If you're unsure, answer N.
+
+config IOSAPIC
+ bool
+ depends on !IA64_HP_SIM
+ default y
+
+config FORCE_MAX_ZONEORDER
+ int "MAX_ORDER (11 - 17)" if !HUGETLB_PAGE
+ range 11 17 if !HUGETLB_PAGE
+ default "17" if HUGETLB_PAGE
+ default "11"
+
+config SMP
+ bool "Symmetric multi-processing support"
+ help
+ This enables support for systems with more than one CPU. If you have
+ a system with only one CPU, say N. If you have a system with more
+ than one CPU, say Y.
+
+ If you say N here, the kernel will run on single and multiprocessor
+ systems, but will use only one CPU of a multiprocessor system. If
+ you say Y here, the kernel will run on many, but not all,
+ single processor systems. On a single processor system, the kernel
+ will run faster if you say N here.
+
+ See also the SMP-HOWTO available at
+ <http://www.tldp.org/docs.html#howto>.
+
+ If you don't know what to do here, say N.
+
+config NR_CPUS
+ int "Maximum number of CPUs (2-4096)"
+ range 2 4096
+ depends on SMP
+ default "4096"
+ help
+ You should set this to the number of CPUs in your system, but
+ keep in mind that a kernel compiled for, e.g., 2 CPUs will boot but
+ only use 2 CPUs on a >2 CPU system. Setting this to a value larger
+ than 64 will cause the use of a CPU mask array, causing a small
+ performance hit.
+
+config HOTPLUG_CPU
+ bool "Support for hot-pluggable CPUs"
+ depends on SMP
+ default n
+ ---help---
+ Say Y here to experiment with turning CPUs off and on. CPUs
+ can be controlled through /sys/devices/system/cpu/cpu#.
+ Say N if you want to disable CPU hotplug.
+
+config ARCH_ENABLE_MEMORY_HOTPLUG
+ def_bool y
+
+config ARCH_ENABLE_MEMORY_HOTREMOVE
+ def_bool y
+
+config SCHED_SMT
+ bool "SMT scheduler support"
+ depends on SMP
+ help
+ Improves the CPU scheduler's decision making when dealing with
+ Intel IA64 chips with MultiThreading at a cost of slightly increased
+ overhead in some places. If unsure say N here.
+
+config PERMIT_BSP_REMOVE
+ bool "Support removal of Bootstrap Processor"
+ depends on HOTPLUG_CPU
+ default n
+ ---help---
+ Say Y here if your platform SAL will support removal of BSP with HOTPLUG_CPU
+ support.
+
+config FORCE_CPEI_RETARGET
+ bool "Force assumption that CPEI can be re-targeted"
+ depends on PERMIT_BSP_REMOVE
+ default n
+ ---help---
+ Say Y if you need to force the assumption that CPEI can be re-targeted to
+ any cpu in the system. This hint is available via ACPI 3.0 specifications.
+ Tiger4 systems are capable of re-directing CPEI to any CPU other than BSP.
+ This option it useful to enable this feature on older BIOS's as well.
+ You can also enable this by using boot command line option force_cpei=1.
+
+source "kernel/Kconfig.preempt"
+
+source "mm/Kconfig"
+
+config ARCH_SELECT_MEMORY_MODEL
+ def_bool y
+
+config ARCH_DISCONTIGMEM_ENABLE
+ def_bool y
+ help
+ Say Y to support efficient handling of discontiguous physical memory,
+ for architectures which are either NUMA (Non-Uniform Memory Access)
+ or have huge holes in the physical address space for other reasons.
+ See <file:Documentation/vm/numa> for more.
+
+config ARCH_FLATMEM_ENABLE
+ def_bool y
+
+config ARCH_SPARSEMEM_ENABLE
+ def_bool y
+ depends on ARCH_DISCONTIGMEM_ENABLE
+ select SPARSEMEM_VMEMMAP_ENABLE
+
+config ARCH_DISCONTIGMEM_DEFAULT
+ def_bool y if (IA64_SGI_SN2 || IA64_GENERIC || IA64_HP_ZX1 || IA64_HP_ZX1_SWIOTLB)
+ depends on ARCH_DISCONTIGMEM_ENABLE
+
+config NUMA
+ bool "NUMA support"
+ depends on !IA64_HP_SIM && !FLATMEM
+ default y if IA64_SGI_SN2
+ select ACPI_NUMA if ACPI
+ help
+ Say Y to compile the kernel to support NUMA (Non-Uniform Memory
+ Access). This option is for configuring high-end multiprocessor
+ server systems. If in doubt, say N.
+
+config NODES_SHIFT
+ int "Max num nodes shift(3-10)"
+ range 3 10
+ default "10"
+ depends on NEED_MULTIPLE_NODES
+ help
+ This option specifies the maximum number of nodes in your SSI system.
+ MAX_NUMNODES will be 2^(This value).
+ If in doubt, use the default.
+
+# VIRTUAL_MEM_MAP and FLAT_NODE_MEM_MAP are functionally equivalent.
+# VIRTUAL_MEM_MAP has been retained for historical reasons.
+config VIRTUAL_MEM_MAP
+ bool "Virtual mem map"
+ depends on !SPARSEMEM
+ default y if !IA64_HP_SIM
+ help
+ Say Y to compile the kernel with support for a virtual mem map.
+ This code also only takes effect if a memory hole of greater than
+ 1 Gb is found during boot. You must turn this option on if you
+ require the DISCONTIGMEM option for your machine. If you are
+ unsure, say Y.
+
+config HOLES_IN_ZONE
+ bool
+ default y if VIRTUAL_MEM_MAP
+
+config HAVE_ARCH_EARLY_PFN_TO_NID
+ def_bool NUMA && SPARSEMEM
+
+config HAVE_ARCH_NODEDATA_EXTENSION
+ def_bool y
+ depends on NUMA
+
+config USE_PERCPU_NUMA_NODE_ID
+ def_bool y
+ depends on NUMA
+
+config HAVE_MEMORYLESS_NODES
+ def_bool NUMA
+
+config ARCH_PROC_KCORE_TEXT
+ def_bool y
+ depends on PROC_KCORE
+
+config IA64_MCA_RECOVERY
+ tristate "MCA recovery from errors other than TLB."
+
+config PERFMON
+ bool "Performance monitor support"
+ help
+ Selects whether support for the IA-64 performance monitor hardware
+ is included in the kernel. This makes some kernel data-structures a
+ little bigger and slows down execution a bit, but it is generally
+ a good idea to turn this on. If you're unsure, say Y.
+
+config IA64_PALINFO
+ tristate "/proc/pal support"
+ help
+ If you say Y here, you are able to get PAL (Processor Abstraction
+ Layer) information in /proc/pal. This contains useful information
+ about the processors in your systems, such as cache and TLB sizes
+ and the PAL firmware version in use.
+
+ To use this option, you have to ensure that the "/proc file system
+ support" (CONFIG_PROC_FS) is enabled, too.
+
+config IA64_MC_ERR_INJECT
+ tristate "MC error injection support"
+ help
+ Adds support for MC error injection. If enabled, the kernel
+ will provide a sysfs interface for user applications to
+ call MC error injection PAL procedures to inject various errors.
+ This is a useful tool for MCA testing.
+
+ If you're unsure, do not select this option.
+
+config SGI_SN
+ def_bool y if (IA64_SGI_SN2 || IA64_GENERIC)
+
+config IA64_ESI
+ bool "ESI (Extensible SAL Interface) support"
+ help
+ If you say Y here, support is built into the kernel to
+ make ESI calls. ESI calls are used to support vendor-specific
+ firmware extensions, such as the ability to inject memory-errors
+ for test-purposes. If you're unsure, say N.
+
+config IA64_HP_AML_NFW
+ bool "Support ACPI AML calls to native firmware"
+ help
+ This driver installs a global ACPI Operation Region handler for
+ region 0xA1. AML methods can use this OpRegion to call arbitrary
+ native firmware functions. The driver installs the OpRegion
+ handler if there is an HPQ5001 device or if the user supplies
+ the "force" module parameter, e.g., with the "aml_nfw.force"
+ kernel command line option.
+
+source "drivers/sn/Kconfig"
+
+config KEXEC
+ bool "kexec system call"
+ depends on !IA64_HP_SIM && (!SMP || HOTPLUG_CPU)
+ help
+ kexec is a system call that implements the ability to shutdown your
+ current kernel, and to start another kernel. It is like a reboot
+ but it is independent of the system firmware. And like a reboot
+ you can start any kernel with it, not just Linux.
+
+ The name comes from the similarity to the exec system call.
+
+ It is an ongoing process to be certain the hardware in a machine
+ is properly shutdown, so do not be surprised if this code does not
+ initially work for you. As of this writing the exact hardware
+ interface is strongly in flux, so no good recommendation can be
+ made.
+
+config CRASH_DUMP
+ bool "kernel crash dumps"
+ depends on IA64_MCA_RECOVERY && !IA64_HP_SIM && (!SMP || HOTPLUG_CPU)
+ help
+ Generate crash dump after being started by kexec.
+
+source "drivers/firmware/Kconfig"
+
+source "fs/Kconfig.binfmt"
+
+endmenu
+
+menu "Power management and ACPI options"
+
+source "kernel/power/Kconfig"
+
+source "drivers/acpi/Kconfig"
+
+if PM
+menu "CPU Frequency scaling"
+source "drivers/cpufreq/Kconfig"
+endmenu
+endif
+
+endmenu
+
+if !IA64_HP_SIM
+
+menu "Bus options (PCI, PCMCIA)"
+
+config PCI
+ bool "PCI support"
+ help
+ Real IA-64 machines all have PCI/PCI-X/PCI Express busses. Say Y
+ here unless you are using a simulator without PCI support.
+
+config PCI_DOMAINS
+ def_bool PCI
+
+config PCI_SYSCALL
+ def_bool PCI
+
+source "drivers/pci/pcie/Kconfig"
+
+source "drivers/pci/Kconfig"
+
+source "drivers/pci/hotplug/Kconfig"
+
+source "drivers/pcmcia/Kconfig"
+
+endmenu
+
+endif
+
+source "net/Kconfig"
+
+source "drivers/Kconfig"
+
+source "arch/ia64/hp/sim/Kconfig"
+
+config MSPEC
+ tristate "Memory special operations driver"
+ depends on IA64
+ select IA64_UNCACHED_ALLOCATOR
+ help
+ If you have an ia64 and you want to enable memory special
+ operations support (formerly known as fetchop), say Y here,
+ otherwise say N.
+
+source "fs/Kconfig"
+
+source "arch/ia64/Kconfig.debug"
+
+source "security/Kconfig"
+
+source "crypto/Kconfig"
+
+source "lib/Kconfig"
+
+config IOMMU_HELPER
+ def_bool (IA64_HP_ZX1 || IA64_HP_ZX1_SWIOTLB || IA64_GENERIC || SWIOTLB)