summaryrefslogtreecommitdiffstats
path: root/kernel/arch/frv/mb93090-mb00
diff options
context:
space:
mode:
Diffstat (limited to 'kernel/arch/frv/mb93090-mb00')
-rw-r--r--kernel/arch/frv/mb93090-mb00/Makefile15
-rw-r--r--kernel/arch/frv/mb93090-mb00/flash.c90
-rw-r--r--kernel/arch/frv/mb93090-mb00/pci-dma-nommu.c146
-rw-r--r--kernel/arch/frv/mb93090-mb00/pci-dma.c91
-rw-r--r--kernel/arch/frv/mb93090-mb00/pci-frv.c196
-rw-r--r--kernel/arch/frv/mb93090-mb00/pci-frv.h40
-rw-r--r--kernel/arch/frv/mb93090-mb00/pci-irq.c61
-rw-r--r--kernel/arch/frv/mb93090-mb00/pci-vdk.c419
8 files changed, 1058 insertions, 0 deletions
diff --git a/kernel/arch/frv/mb93090-mb00/Makefile b/kernel/arch/frv/mb93090-mb00/Makefile
new file mode 100644
index 000000000..21f1df1b3
--- /dev/null
+++ b/kernel/arch/frv/mb93090-mb00/Makefile
@@ -0,0 +1,15 @@
+#
+# Makefile for the MB93090-MB00 motherboard stuff
+#
+
+ifeq "$(CONFIG_PCI)" "y"
+obj-y := pci-frv.o pci-irq.o pci-vdk.o
+
+ifeq "$(CONFIG_MMU)" "y"
+obj-y += pci-dma.o
+else
+obj-y += pci-dma-nommu.o
+endif
+endif
+
+obj-$(CONFIG_MTD) += flash.o
diff --git a/kernel/arch/frv/mb93090-mb00/flash.c b/kernel/arch/frv/mb93090-mb00/flash.c
new file mode 100644
index 000000000..c0e3707c2
--- /dev/null
+++ b/kernel/arch/frv/mb93090-mb00/flash.c
@@ -0,0 +1,90 @@
+/* Flash mappings for the MB93090-MB00 motherboard
+ *
+ * Copyright (C) 2009 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/mtd/partitions.h>
+#include <linux/mtd/physmap.h>
+
+#define MB93090_BOOTROM_ADDR 0xFF000000 /* Boot ROM */
+#define MB93090_BOOTROM_SIZE (2 * 1024 * 1024)
+#define MB93090_USERROM_ADDR 0xFF200000 /* User ROM */
+#define MB93090_USERROM_SIZE (2 * 1024 * 1024)
+
+/*
+ * default MTD partition table for both main flash devices, expected to be
+ * overridden by RedBoot
+ */
+static struct mtd_partition mb93090_partitions[] = {
+ {
+ .name = "Filesystem",
+ .size = MTDPART_SIZ_FULL,
+ .offset = 0,
+ }
+};
+
+/*
+ * Definition of the MB93090 Boot ROM (on the CPU card)
+ */
+static struct physmap_flash_data mb93090_bootrom_data = {
+ .width = 2,
+ .nr_parts = 2,
+ .parts = mb93090_partitions,
+};
+
+static struct resource mb93090_bootrom_resource = {
+ .start = MB93090_BOOTROM_ADDR,
+ .end = MB93090_BOOTROM_ADDR + MB93090_BOOTROM_SIZE - 1,
+ .flags = IORESOURCE_MEM,
+};
+
+static struct platform_device mb93090_bootrom = {
+ .name = "physmap-flash",
+ .id = 0,
+ .dev.platform_data = &mb93090_bootrom_data,
+ .num_resources = 1,
+ .resource = &mb93090_bootrom_resource,
+};
+
+/*
+ * Definition of the MB93090 User ROM definition (on the motherboard)
+ */
+static struct physmap_flash_data mb93090_userrom_data = {
+ .width = 2,
+ .nr_parts = 2,
+ .parts = mb93090_partitions,
+};
+
+static struct resource mb93090_userrom_resource = {
+ .start = MB93090_USERROM_ADDR,
+ .end = MB93090_USERROM_ADDR + MB93090_USERROM_SIZE - 1,
+ .flags = IORESOURCE_MEM,
+};
+
+static struct platform_device mb93090_userrom = {
+ .name = "physmap-flash",
+ .id = 1,
+ .dev.platform_data = &mb93090_userrom_data,
+ .num_resources = 1,
+ .resource = &mb93090_userrom_resource,
+};
+
+/*
+ * register the MB93090 flashes
+ */
+static int __init mb93090_mtd_init(void)
+{
+ platform_device_register(&mb93090_bootrom);
+ platform_device_register(&mb93090_userrom);
+ return 0;
+}
+
+module_init(mb93090_mtd_init);
diff --git a/kernel/arch/frv/mb93090-mb00/pci-dma-nommu.c b/kernel/arch/frv/mb93090-mb00/pci-dma-nommu.c
new file mode 100644
index 000000000..b99c2a7cc
--- /dev/null
+++ b/kernel/arch/frv/mb93090-mb00/pci-dma-nommu.c
@@ -0,0 +1,146 @@
+/* pci-dma-nommu.c: Dynamic DMA mapping support for the FRV
+ *
+ * Copyright (C) 2004 Red Hat, Inc. All Rights Reserved.
+ * Written by David Woodhouse (dwmw2@infradead.org)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#include <linux/types.h>
+#include <linux/slab.h>
+#include <linux/export.h>
+#include <linux/dma-mapping.h>
+#include <linux/list.h>
+#include <linux/pci.h>
+#include <asm/io.h>
+
+#if 1
+#define DMA_SRAM_START dma_coherent_mem_start
+#define DMA_SRAM_END dma_coherent_mem_end
+#else // Use video RAM on Matrox
+#define DMA_SRAM_START 0xe8900000
+#define DMA_SRAM_END 0xe8a00000
+#endif
+
+struct dma_alloc_record {
+ struct list_head list;
+ unsigned long ofs;
+ unsigned long len;
+};
+
+static DEFINE_SPINLOCK(dma_alloc_lock);
+static LIST_HEAD(dma_alloc_list);
+
+void *dma_alloc_coherent(struct device *hwdev, size_t size, dma_addr_t *dma_handle, gfp_t gfp)
+{
+ struct dma_alloc_record *new;
+ struct list_head *this = &dma_alloc_list;
+ unsigned long flags;
+ unsigned long start = DMA_SRAM_START;
+ unsigned long end;
+
+ if (!DMA_SRAM_START) {
+ printk("%s called without any DMA area reserved!\n", __func__);
+ return NULL;
+ }
+
+ new = kmalloc(sizeof (*new), GFP_ATOMIC);
+ if (!new)
+ return NULL;
+
+ /* Round up to a reasonable alignment */
+ new->len = (size + 31) & ~31;
+
+ spin_lock_irqsave(&dma_alloc_lock, flags);
+
+ list_for_each (this, &dma_alloc_list) {
+ struct dma_alloc_record *this_r = list_entry(this, struct dma_alloc_record, list);
+ end = this_r->ofs;
+
+ if (end - start >= size)
+ goto gotone;
+
+ start = this_r->ofs + this_r->len;
+ }
+ /* Reached end of list. */
+ end = DMA_SRAM_END;
+ this = &dma_alloc_list;
+
+ if (end - start >= size) {
+ gotone:
+ new->ofs = start;
+ list_add_tail(&new->list, this);
+ spin_unlock_irqrestore(&dma_alloc_lock, flags);
+
+ *dma_handle = start;
+ return (void *)start;
+ }
+
+ kfree(new);
+ spin_unlock_irqrestore(&dma_alloc_lock, flags);
+ return NULL;
+}
+
+EXPORT_SYMBOL(dma_alloc_coherent);
+
+void dma_free_coherent(struct device *hwdev, size_t size, void *vaddr, dma_addr_t dma_handle)
+{
+ struct dma_alloc_record *rec;
+ unsigned long flags;
+
+ spin_lock_irqsave(&dma_alloc_lock, flags);
+
+ list_for_each_entry(rec, &dma_alloc_list, list) {
+ if (rec->ofs == dma_handle) {
+ list_del(&rec->list);
+ kfree(rec);
+ spin_unlock_irqrestore(&dma_alloc_lock, flags);
+ return;
+ }
+ }
+ spin_unlock_irqrestore(&dma_alloc_lock, flags);
+ BUG();
+}
+
+EXPORT_SYMBOL(dma_free_coherent);
+
+dma_addr_t dma_map_single(struct device *dev, void *ptr, size_t size,
+ enum dma_data_direction direction)
+{
+ BUG_ON(direction == DMA_NONE);
+
+ frv_cache_wback_inv((unsigned long) ptr, (unsigned long) ptr + size);
+
+ return virt_to_bus(ptr);
+}
+
+EXPORT_SYMBOL(dma_map_single);
+
+int dma_map_sg(struct device *dev, struct scatterlist *sg, int nents,
+ enum dma_data_direction direction)
+{
+ int i;
+
+ for (i=0; i<nents; i++)
+ frv_cache_wback_inv(sg_dma_address(&sg[i]),
+ sg_dma_address(&sg[i]) + sg_dma_len(&sg[i]));
+
+ BUG_ON(direction == DMA_NONE);
+
+ return nents;
+}
+
+EXPORT_SYMBOL(dma_map_sg);
+
+dma_addr_t dma_map_page(struct device *dev, struct page *page, unsigned long offset,
+ size_t size, enum dma_data_direction direction)
+{
+ BUG_ON(direction == DMA_NONE);
+ flush_dcache_page(page);
+ return (dma_addr_t) page_to_phys(page) + offset;
+}
+
+EXPORT_SYMBOL(dma_map_page);
diff --git a/kernel/arch/frv/mb93090-mb00/pci-dma.c b/kernel/arch/frv/mb93090-mb00/pci-dma.c
new file mode 100644
index 000000000..82478979a
--- /dev/null
+++ b/kernel/arch/frv/mb93090-mb00/pci-dma.c
@@ -0,0 +1,91 @@
+/* pci-dma.c: Dynamic DMA mapping support for the FRV CPUs that have MMUs
+ *
+ * Copyright (C) 2004 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#include <linux/types.h>
+#include <linux/dma-mapping.h>
+#include <linux/list.h>
+#include <linux/pci.h>
+#include <linux/export.h>
+#include <linux/highmem.h>
+#include <linux/scatterlist.h>
+#include <asm/io.h>
+
+void *dma_alloc_coherent(struct device *hwdev, size_t size, dma_addr_t *dma_handle, gfp_t gfp)
+{
+ void *ret;
+
+ ret = consistent_alloc(gfp, size, dma_handle);
+ if (ret)
+ memset(ret, 0, size);
+
+ return ret;
+}
+
+EXPORT_SYMBOL(dma_alloc_coherent);
+
+void dma_free_coherent(struct device *hwdev, size_t size, void *vaddr, dma_addr_t dma_handle)
+{
+ consistent_free(vaddr);
+}
+
+EXPORT_SYMBOL(dma_free_coherent);
+
+dma_addr_t dma_map_single(struct device *dev, void *ptr, size_t size,
+ enum dma_data_direction direction)
+{
+ BUG_ON(direction == DMA_NONE);
+
+ frv_cache_wback_inv((unsigned long) ptr, (unsigned long) ptr + size);
+
+ return virt_to_bus(ptr);
+}
+
+EXPORT_SYMBOL(dma_map_single);
+
+int dma_map_sg(struct device *dev, struct scatterlist *sg, int nents,
+ enum dma_data_direction direction)
+{
+ unsigned long dampr2;
+ void *vaddr;
+ int i;
+
+ BUG_ON(direction == DMA_NONE);
+
+ dampr2 = __get_DAMPR(2);
+
+ for (i = 0; i < nents; i++) {
+ vaddr = kmap_atomic_primary(sg_page(&sg[i]));
+
+ frv_dcache_writeback((unsigned long) vaddr,
+ (unsigned long) vaddr + PAGE_SIZE);
+
+ }
+
+ kunmap_atomic_primary(vaddr);
+ if (dampr2) {
+ __set_DAMPR(2, dampr2);
+ __set_IAMPR(2, dampr2);
+ }
+
+ return nents;
+}
+
+EXPORT_SYMBOL(dma_map_sg);
+
+dma_addr_t dma_map_page(struct device *dev, struct page *page, unsigned long offset,
+ size_t size, enum dma_data_direction direction)
+{
+ BUG_ON(direction == DMA_NONE);
+ flush_dcache_page(page);
+ return (dma_addr_t) page_to_phys(page) + offset;
+}
+
+EXPORT_SYMBOL(dma_map_page);
diff --git a/kernel/arch/frv/mb93090-mb00/pci-frv.c b/kernel/arch/frv/mb93090-mb00/pci-frv.c
new file mode 100644
index 000000000..0635bd6c2
--- /dev/null
+++ b/kernel/arch/frv/mb93090-mb00/pci-frv.c
@@ -0,0 +1,196 @@
+/* pci-frv.c: low-level PCI access routines
+ *
+ * Copyright (C) 2003-5 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ * - Derived from the i386 equivalent stuff
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#include <linux/types.h>
+#include <linux/kernel.h>
+#include <linux/pci.h>
+#include <linux/init.h>
+#include <linux/ioport.h>
+#include <linux/errno.h>
+
+#include "pci-frv.h"
+
+/*
+ * We need to avoid collisions with `mirrored' VGA ports
+ * and other strange ISA hardware, so we always want the
+ * addresses to be allocated in the 0x000-0x0ff region
+ * modulo 0x400.
+ *
+ * Why? Because some silly external IO cards only decode
+ * the low 10 bits of the IO address. The 0x00-0xff region
+ * is reserved for motherboard devices that decode all 16
+ * bits, so it's ok to allocate at, say, 0x2800-0x28ff,
+ * but we want to try to avoid allocating at 0x2900-0x2bff
+ * which might have be mirrored at 0x0100-0x03ff..
+ */
+resource_size_t
+pcibios_align_resource(void *data, const struct resource *res,
+ resource_size_t size, resource_size_t align)
+{
+ resource_size_t start = res->start;
+
+ if ((res->flags & IORESOURCE_IO) && (start & 0x300))
+ start = (start + 0x3ff) & ~0x3ff;
+
+ return start;
+}
+
+
+/*
+ * Handle resources of PCI devices. If the world were perfect, we could
+ * just allocate all the resource regions and do nothing more. It isn't.
+ * On the other hand, we cannot just re-allocate all devices, as it would
+ * require us to know lots of host bridge internals. So we attempt to
+ * keep as much of the original configuration as possible, but tweak it
+ * when it's found to be wrong.
+ *
+ * Known BIOS problems we have to work around:
+ * - I/O or memory regions not configured
+ * - regions configured, but not enabled in the command register
+ * - bogus I/O addresses above 64K used
+ * - expansion ROMs left enabled (this may sound harmless, but given
+ * the fact the PCI specs explicitly allow address decoders to be
+ * shared between expansion ROMs and other resource regions, it's
+ * at least dangerous)
+ *
+ * Our solution:
+ * (1) Allocate resources for all buses behind PCI-to-PCI bridges.
+ * This gives us fixed barriers on where we can allocate.
+ * (2) Allocate resources for all enabled devices. If there is
+ * a collision, just mark the resource as unallocated. Also
+ * disable expansion ROMs during this step.
+ * (3) Try to allocate resources for disabled devices. If the
+ * resources were assigned correctly, everything goes well,
+ * if they weren't, they won't disturb allocation of other
+ * resources.
+ * (4) Assign new addresses to resources which were either
+ * not configured at all or misconfigured. If explicitly
+ * requested by the user, configure expansion ROM address
+ * as well.
+ */
+
+static void __init pcibios_allocate_bus_resources(struct list_head *bus_list)
+{
+ struct list_head *ln;
+ struct pci_bus *bus;
+ struct pci_dev *dev;
+ int idx;
+ struct resource *r;
+
+ /* Depth-First Search on bus tree */
+ for (ln=bus_list->next; ln != bus_list; ln=ln->next) {
+ bus = list_entry(ln, struct pci_bus, node);
+ if ((dev = bus->self)) {
+ for (idx = PCI_BRIDGE_RESOURCES; idx < PCI_NUM_RESOURCES; idx++) {
+ r = &dev->resource[idx];
+ if (!r->start)
+ continue;
+ pci_claim_bridge_resource(dev, idx);
+ }
+ }
+ pcibios_allocate_bus_resources(&bus->children);
+ }
+}
+
+static void __init pcibios_allocate_resources(int pass)
+{
+ struct pci_dev *dev = NULL;
+ int idx, disabled;
+ u16 command;
+ struct resource *r;
+
+ for_each_pci_dev(dev) {
+ pci_read_config_word(dev, PCI_COMMAND, &command);
+ for(idx = 0; idx < 6; idx++) {
+ r = &dev->resource[idx];
+ if (r->parent) /* Already allocated */
+ continue;
+ if (!r->start) /* Address not assigned at all */
+ continue;
+ if (r->flags & IORESOURCE_IO)
+ disabled = !(command & PCI_COMMAND_IO);
+ else
+ disabled = !(command & PCI_COMMAND_MEMORY);
+ if (pass == disabled) {
+ DBG("PCI: Resource %08lx-%08lx (f=%lx, d=%d, p=%d)\n",
+ r->start, r->end, r->flags, disabled, pass);
+ if (pci_claim_resource(dev, idx) < 0) {
+ /* We'll assign a new address later */
+ r->end -= r->start;
+ r->start = 0;
+ }
+ }
+ }
+ if (!pass) {
+ r = &dev->resource[PCI_ROM_RESOURCE];
+ if (r->flags & IORESOURCE_ROM_ENABLE) {
+ /* Turn the ROM off, leave the resource region, but keep it unregistered. */
+ u32 reg;
+ DBG("PCI: Switching off ROM of %s\n", pci_name(dev));
+ r->flags &= ~IORESOURCE_ROM_ENABLE;
+ pci_read_config_dword(dev, dev->rom_base_reg, &reg);
+ pci_write_config_dword(dev, dev->rom_base_reg, reg & ~PCI_ROM_ADDRESS_ENABLE);
+ }
+ }
+ }
+}
+
+static void __init pcibios_assign_resources(void)
+{
+ struct pci_dev *dev = NULL;
+ int idx;
+ struct resource *r;
+
+ for_each_pci_dev(dev) {
+ int class = dev->class >> 8;
+
+ /* Don't touch classless devices and host bridges */
+ if (!class || class == PCI_CLASS_BRIDGE_HOST)
+ continue;
+
+ for(idx=0; idx<6; idx++) {
+ r = &dev->resource[idx];
+
+ /*
+ * Don't touch IDE controllers and I/O ports of video cards!
+ */
+ if ((class == PCI_CLASS_STORAGE_IDE && idx < 4) ||
+ (class == PCI_CLASS_DISPLAY_VGA && (r->flags & IORESOURCE_IO)))
+ continue;
+
+ /*
+ * We shall assign a new address to this resource, either because
+ * the BIOS forgot to do so or because we have decided the old
+ * address was unusable for some reason.
+ */
+ if (!r->start && r->end)
+ pci_assign_resource(dev, idx);
+ }
+
+ if (pci_probe & PCI_ASSIGN_ROMS) {
+ r = &dev->resource[PCI_ROM_RESOURCE];
+ r->end -= r->start;
+ r->start = 0;
+ if (r->end)
+ pci_assign_resource(dev, PCI_ROM_RESOURCE);
+ }
+ }
+}
+
+void __init pcibios_resource_survey(void)
+{
+ DBG("PCI: Allocating resources\n");
+ pcibios_allocate_bus_resources(&pci_root_buses);
+ pcibios_allocate_resources(0);
+ pcibios_allocate_resources(1);
+ pcibios_assign_resources();
+}
diff --git a/kernel/arch/frv/mb93090-mb00/pci-frv.h b/kernel/arch/frv/mb93090-mb00/pci-frv.h
new file mode 100644
index 000000000..a7e487fe7
--- /dev/null
+++ b/kernel/arch/frv/mb93090-mb00/pci-frv.h
@@ -0,0 +1,40 @@
+/*
+ * Low-Level PCI Access for FRV machines.
+ *
+ * (c) 1999 Martin Mares <mj@ucw.cz>
+ */
+
+#include <asm/sections.h>
+
+#undef DEBUG
+
+#ifdef DEBUG
+#define DBG(x...) printk(x)
+#else
+#define DBG(x...)
+#endif
+
+#define PCI_PROBE_BIOS 0x0001
+#define PCI_PROBE_CONF1 0x0002
+#define PCI_PROBE_CONF2 0x0004
+#define PCI_NO_CHECKS 0x0400
+#define PCI_ASSIGN_ROMS 0x1000
+#define PCI_BIOS_IRQ_SCAN 0x2000
+#define PCI_ASSIGN_ALL_BUSSES 0x4000
+
+extern unsigned int __nongpreldata pci_probe;
+
+/* pci-frv.c */
+
+void pcibios_resource_survey(void);
+
+/* pci-vdk.c */
+
+extern struct pci_ops *__nongpreldata pci_root_ops;
+
+/* pci-irq.c */
+extern unsigned int pcibios_irq_mask;
+
+void pcibios_irq_init(void);
+void pcibios_fixup_irqs(void);
+void pcibios_enable_irq(struct pci_dev *dev);
diff --git a/kernel/arch/frv/mb93090-mb00/pci-irq.c b/kernel/arch/frv/mb93090-mb00/pci-irq.c
new file mode 100644
index 000000000..1c35c93f9
--- /dev/null
+++ b/kernel/arch/frv/mb93090-mb00/pci-irq.c
@@ -0,0 +1,61 @@
+/* pci-irq.c: PCI IRQ routing on the FRV motherboard
+ *
+ * Copyright (C) 2003 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ * derived from: arch/i386/kernel/pci-irq.c: (c) 1999--2000 Martin Mares <mj@suse.cz>
+ */
+
+#include <linux/types.h>
+#include <linux/kernel.h>
+#include <linux/pci.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+
+#include <asm/io.h>
+#include <asm/smp.h>
+
+#include "pci-frv.h"
+
+/*
+ * DEVICE DEVNO INT#A INT#B INT#C INT#D
+ * ======= ======= ======= ======= ======= =======
+ * MB86943 0 fpga.10 - - -
+ * RTL8029 16 fpga.12 - - -
+ * SLOT 1 19 fpga.6 fpga.5 fpga.4 fpga.3
+ * SLOT 2 18 fpga.5 fpga.4 fpga.3 fpga.6
+ * SLOT 3 17 fpga.4 fpga.3 fpga.6 fpga.5
+ *
+ */
+
+static const uint8_t __initconst pci_bus0_irq_routing[32][4] = {
+ [0 ] = { IRQ_FPGA_MB86943_PCI_INTA },
+ [16] = { IRQ_FPGA_RTL8029_INTA },
+ [17] = { IRQ_FPGA_PCI_INTC, IRQ_FPGA_PCI_INTD, IRQ_FPGA_PCI_INTA, IRQ_FPGA_PCI_INTB },
+ [18] = { IRQ_FPGA_PCI_INTB, IRQ_FPGA_PCI_INTC, IRQ_FPGA_PCI_INTD, IRQ_FPGA_PCI_INTA },
+ [19] = { IRQ_FPGA_PCI_INTA, IRQ_FPGA_PCI_INTB, IRQ_FPGA_PCI_INTC, IRQ_FPGA_PCI_INTD },
+};
+
+void __init pcibios_irq_init(void)
+{
+}
+
+void __init pcibios_fixup_irqs(void)
+{
+ struct pci_dev *dev = NULL;
+ uint8_t line, pin;
+
+ for_each_pci_dev(dev) {
+ pci_read_config_byte(dev, PCI_INTERRUPT_PIN, &pin);
+ if (pin) {
+ dev->irq = pci_bus0_irq_routing[PCI_SLOT(dev->devfn)][pin - 1];
+ pci_write_config_byte(dev, PCI_INTERRUPT_LINE, dev->irq);
+ }
+ pci_read_config_byte(dev, PCI_INTERRUPT_LINE, &line);
+ }
+}
+
+void pcibios_enable_irq(struct pci_dev *dev)
+{
+ pci_write_config_byte(dev, PCI_INTERRUPT_LINE, dev->irq);
+}
diff --git a/kernel/arch/frv/mb93090-mb00/pci-vdk.c b/kernel/arch/frv/mb93090-mb00/pci-vdk.c
new file mode 100644
index 000000000..f211839e2
--- /dev/null
+++ b/kernel/arch/frv/mb93090-mb00/pci-vdk.c
@@ -0,0 +1,419 @@
+/* pci-vdk.c: MB93090-MB00 (VDK) PCI support
+ *
+ * Copyright (C) 2003, 2004 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#include <linux/types.h>
+#include <linux/kernel.h>
+#include <linux/sched.h>
+#include <linux/pci.h>
+#include <linux/init.h>
+#include <linux/ioport.h>
+#include <linux/delay.h>
+
+#include <asm/segment.h>
+#include <asm/io.h>
+#include <asm/mb-regs.h>
+#include <asm/mb86943a.h>
+#include "pci-frv.h"
+
+unsigned int __nongpreldata pci_probe = 1;
+
+struct pci_ops *__nongpreldata pci_root_ops;
+
+/*
+ * The accessible PCI window does not cover the entire CPU address space, but
+ * there are devices we want to access outside of that window, so we need to
+ * insert specific PCI bus resources instead of using the platform-level bus
+ * resources directly for the PCI root bus.
+ *
+ * These are configured and inserted by pcibios_init() and are attached to the
+ * root bus by pcibios_fixup_bus().
+ */
+static struct resource pci_ioport_resource = {
+ .name = "PCI IO",
+ .start = 0,
+ .end = IO_SPACE_LIMIT,
+ .flags = IORESOURCE_IO,
+};
+
+static struct resource pci_iomem_resource = {
+ .name = "PCI mem",
+ .start = 0,
+ .end = -1,
+ .flags = IORESOURCE_MEM,
+};
+
+/*
+ * Functions for accessing PCI configuration space
+ */
+
+#define CONFIG_CMD(bus, dev, where) \
+ (0x80000000 | (bus->number << 16) | (devfn << 8) | (where & ~3))
+
+#define __set_PciCfgAddr(A) writel((A), (volatile void __iomem *) __region_CS1 + 0x80)
+
+#define __get_PciCfgDataB(A) readb((volatile void __iomem *) __region_CS1 + 0x88 + ((A) & 3))
+#define __get_PciCfgDataW(A) readw((volatile void __iomem *) __region_CS1 + 0x88 + ((A) & 2))
+#define __get_PciCfgDataL(A) readl((volatile void __iomem *) __region_CS1 + 0x88)
+
+#define __set_PciCfgDataB(A,V) \
+ writeb((V), (volatile void __iomem *) __region_CS1 + 0x88 + (3 - ((A) & 3)))
+
+#define __set_PciCfgDataW(A,V) \
+ writew((V), (volatile void __iomem *) __region_CS1 + 0x88 + (2 - ((A) & 2)))
+
+#define __set_PciCfgDataL(A,V) \
+ writel((V), (volatile void __iomem *) __region_CS1 + 0x88)
+
+#define __get_PciBridgeDataB(A) readb((volatile void __iomem *) __region_CS1 + 0x800 + (A))
+#define __get_PciBridgeDataW(A) readw((volatile void __iomem *) __region_CS1 + 0x800 + (A))
+#define __get_PciBridgeDataL(A) readl((volatile void __iomem *) __region_CS1 + 0x800 + (A))
+
+#define __set_PciBridgeDataB(A,V) writeb((V), (volatile void __iomem *) __region_CS1 + 0x800 + (A))
+#define __set_PciBridgeDataW(A,V) writew((V), (volatile void __iomem *) __region_CS1 + 0x800 + (A))
+#define __set_PciBridgeDataL(A,V) writel((V), (volatile void __iomem *) __region_CS1 + 0x800 + (A))
+
+static inline int __query(const struct pci_dev *dev)
+{
+// return dev->bus->number==0 && (dev->devfn==PCI_DEVFN(0,0));
+// return dev->bus->number==1;
+// return dev->bus->number==0 &&
+// (dev->devfn==PCI_DEVFN(2,0) || dev->devfn==PCI_DEVFN(3,0));
+ return 0;
+}
+
+/*****************************************************************************/
+/*
+ *
+ */
+static int pci_frv_read_config(struct pci_bus *bus, unsigned int devfn, int where, int size,
+ u32 *val)
+{
+ u32 _value;
+
+ if (bus->number == 0 && devfn == PCI_DEVFN(0, 0)) {
+ _value = __get_PciBridgeDataL(where & ~3);
+ }
+ else {
+ __set_PciCfgAddr(CONFIG_CMD(bus, devfn, where));
+ _value = __get_PciCfgDataL(where & ~3);
+ }
+
+ switch (size) {
+ case 1:
+ _value = _value >> ((where & 3) * 8);
+ break;
+
+ case 2:
+ _value = _value >> ((where & 2) * 8);
+ break;
+
+ case 4:
+ break;
+
+ default:
+ BUG();
+ }
+
+ *val = _value;
+ return PCIBIOS_SUCCESSFUL;
+}
+
+static int pci_frv_write_config(struct pci_bus *bus, unsigned int devfn, int where, int size,
+ u32 value)
+{
+ switch (size) {
+ case 1:
+ if (bus->number == 0 && devfn == PCI_DEVFN(0, 0)) {
+ __set_PciBridgeDataB(where, value);
+ }
+ else {
+ __set_PciCfgAddr(CONFIG_CMD(bus, devfn, where));
+ __set_PciCfgDataB(where, value);
+ }
+ break;
+
+ case 2:
+ if (bus->number == 0 && devfn == PCI_DEVFN(0, 0)) {
+ __set_PciBridgeDataW(where, value);
+ }
+ else {
+ __set_PciCfgAddr(CONFIG_CMD(bus, devfn, where));
+ __set_PciCfgDataW(where, value);
+ }
+ break;
+
+ case 4:
+ if (bus->number == 0 && devfn == PCI_DEVFN(0, 0)) {
+ __set_PciBridgeDataL(where, value);
+ }
+ else {
+ __set_PciCfgAddr(CONFIG_CMD(bus, devfn, where));
+ __set_PciCfgDataL(where, value);
+ }
+ break;
+
+ default:
+ BUG();
+ }
+
+ return PCIBIOS_SUCCESSFUL;
+}
+
+static struct pci_ops pci_direct_frv = {
+ .read = pci_frv_read_config,
+ .write = pci_frv_write_config,
+};
+
+/*
+ * Before we decide to use direct hardware access mechanisms, we try to do some
+ * trivial checks to ensure it at least _seems_ to be working -- we just test
+ * whether bus 00 contains a host bridge (this is similar to checking
+ * techniques used in XFree86, but ours should be more reliable since we
+ * attempt to make use of direct access hints provided by the PCI BIOS).
+ *
+ * This should be close to trivial, but it isn't, because there are buggy
+ * chipsets (yes, you guessed it, by Intel and Compaq) that have no class ID.
+ */
+static int __init pci_sanity_check(struct pci_ops *o)
+{
+ struct pci_bus bus; /* Fake bus and device */
+ u32 id;
+
+ bus.number = 0;
+
+ if (o->read(&bus, 0, PCI_VENDOR_ID, 4, &id) == PCIBIOS_SUCCESSFUL) {
+ printk("PCI: VDK Bridge device:vendor: %08x\n", id);
+ if (id == 0x200e10cf)
+ return 1;
+ }
+
+ printk("PCI: VDK Bridge: Sanity check failed\n");
+ return 0;
+}
+
+static struct pci_ops * __init pci_check_direct(void)
+{
+ unsigned long flags;
+
+ local_irq_save(flags);
+
+ /* check if access works */
+ if (pci_sanity_check(&pci_direct_frv)) {
+ local_irq_restore(flags);
+ printk("PCI: Using configuration frv\n");
+// request_mem_region(0xBE040000, 256, "FRV bridge");
+// request_mem_region(0xBFFFFFF4, 12, "PCI frv");
+ return &pci_direct_frv;
+ }
+
+ local_irq_restore(flags);
+ return NULL;
+}
+
+/*
+ * Exceptions for specific devices. Usually work-arounds for fatal design flaws.
+ */
+
+static void __init pci_fixup_umc_ide(struct pci_dev *d)
+{
+ /*
+ * UM8886BF IDE controller sets region type bits incorrectly,
+ * therefore they look like memory despite of them being I/O.
+ */
+ int i;
+
+ printk("PCI: Fixing base address flags for device %s\n", pci_name(d));
+ for(i=0; i<4; i++)
+ d->resource[i].flags |= PCI_BASE_ADDRESS_SPACE_IO;
+}
+
+static void pci_fixup_ide_bases(struct pci_dev *d)
+{
+ int i;
+
+ /*
+ * PCI IDE controllers use non-standard I/O port decoding, respect it.
+ */
+ if ((d->class >> 8) != PCI_CLASS_STORAGE_IDE)
+ return;
+ printk("PCI: IDE base address fixup for %s\n", pci_name(d));
+ for(i=0; i<4; i++) {
+ struct resource *r = &d->resource[i];
+ if ((r->start & ~0x80) == 0x374) {
+ r->start |= 2;
+ r->end = r->start;
+ }
+ }
+}
+
+static void pci_fixup_ide_trash(struct pci_dev *d)
+{
+ int i;
+
+ /*
+ * There exist PCI IDE controllers which have utter garbage
+ * in first four base registers. Ignore that.
+ */
+ printk("PCI: IDE base address trash cleared for %s\n", pci_name(d));
+ for(i=0; i<4; i++)
+ d->resource[i].start = d->resource[i].end = d->resource[i].flags = 0;
+}
+
+static void pci_fixup_latency(struct pci_dev *d)
+{
+ /*
+ * SiS 5597 and 5598 chipsets require latency timer set to
+ * at most 32 to avoid lockups.
+ */
+ DBG("PCI: Setting max latency to 32\n");
+ pcibios_max_latency = 32;
+}
+
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_UMC, PCI_DEVICE_ID_UMC_UM8886BF, pci_fixup_umc_ide);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_SI, PCI_DEVICE_ID_SI_5513, pci_fixup_ide_trash);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_SI, PCI_DEVICE_ID_SI_5597, pci_fixup_latency);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_SI, PCI_DEVICE_ID_SI_5598, pci_fixup_latency);
+DECLARE_PCI_FIXUP_HEADER(PCI_ANY_ID, PCI_ANY_ID, pci_fixup_ide_bases);
+
+/*
+ * Called after each bus is probed, but before its children
+ * are examined.
+ */
+
+void pcibios_fixup_bus(struct pci_bus *bus)
+{
+#if 0
+ printk("### PCIBIOS_FIXUP_BUS(%d)\n",bus->number);
+#endif
+
+ pci_read_bridge_bases(bus);
+
+ if (bus->number == 0) {
+ struct pci_dev *dev;
+ list_for_each_entry(dev, &bus->devices, bus_list) {
+ if (dev->devfn == 0) {
+ dev->resource[0].start = 0;
+ dev->resource[0].end = 0;
+ }
+ }
+ }
+}
+
+/*
+ * Initialization. Try all known PCI access methods. Note that we support
+ * using both PCI BIOS and direct access: in such cases, we use I/O ports
+ * to access config space, but we still keep BIOS order of cards to be
+ * compatible with 2.0.X. This should go away some day.
+ */
+
+int __init pcibios_init(void)
+{
+ struct pci_bus *bus;
+ struct pci_ops *dir = NULL;
+ LIST_HEAD(resources);
+
+ if (!mb93090_mb00_detected)
+ return -ENXIO;
+
+ __reg_MB86943_sl_ctl |= MB86943_SL_CTL_DRCT_MASTER_SWAP | MB86943_SL_CTL_DRCT_SLAVE_SWAP;
+
+ __reg_MB86943_ecs_base(1) = ((__region_CS2 + 0x01000000) >> 9) | 0x08000000;
+ __reg_MB86943_ecs_base(2) = ((__region_CS2 + 0x00000000) >> 9) | 0x08000000;
+
+ *(volatile uint32_t *) (__region_CS1 + 0x848) = 0xe0000000;
+ *(volatile uint32_t *) (__region_CS1 + 0x8b8) = 0x00000000;
+
+ __reg_MB86943_sl_pci_io_base = (__region_CS2 + 0x04000000) >> 9;
+ __reg_MB86943_sl_pci_mem_base = (__region_CS2 + 0x08000000) >> 9;
+ __reg_MB86943_pci_sl_io_base = __region_CS2 + 0x04000000;
+ __reg_MB86943_pci_sl_mem_base = __region_CS2 + 0x08000000;
+ mb();
+
+ /* enable PCI arbitration */
+ __reg_MB86943_pci_arbiter = MB86943_PCIARB_EN;
+
+ pci_ioport_resource.start = (__reg_MB86943_sl_pci_io_base << 9) & 0xfffffc00;
+ pci_ioport_resource.end = (__reg_MB86943_sl_pci_io_range << 9) | 0x3ff;
+ pci_ioport_resource.end += pci_ioport_resource.start;
+
+ printk("PCI IO window: %08llx-%08llx\n",
+ (unsigned long long) pci_ioport_resource.start,
+ (unsigned long long) pci_ioport_resource.end);
+
+ pci_iomem_resource.start = (__reg_MB86943_sl_pci_mem_base << 9) & 0xfffffc00;
+ pci_iomem_resource.end = (__reg_MB86943_sl_pci_mem_range << 9) | 0x3ff;
+ pci_iomem_resource.end += pci_iomem_resource.start;
+
+ /* Reserve somewhere to write to flush posted writes. This is used by
+ * __flush_PCI_writes() from asm/io.h to force the write FIFO in the
+ * CPU-PCI bridge to flush as this doesn't happen automatically when a
+ * read is performed on the MB93090 development kit motherboard.
+ */
+ pci_iomem_resource.start += 0x400;
+
+ printk("PCI MEM window: %08llx-%08llx\n",
+ (unsigned long long) pci_iomem_resource.start,
+ (unsigned long long) pci_iomem_resource.end);
+ printk("PCI DMA memory: %08lx-%08lx\n",
+ dma_coherent_mem_start, dma_coherent_mem_end);
+
+ if (insert_resource(&iomem_resource, &pci_iomem_resource) < 0)
+ panic("Unable to insert PCI IOMEM resource\n");
+ if (insert_resource(&ioport_resource, &pci_ioport_resource) < 0)
+ panic("Unable to insert PCI IOPORT resource\n");
+
+ if (!pci_probe)
+ return -ENXIO;
+
+ dir = pci_check_direct();
+ if (dir)
+ pci_root_ops = dir;
+ else {
+ printk("PCI: No PCI bus detected\n");
+ return -ENXIO;
+ }
+
+ printk("PCI: Probing PCI hardware\n");
+ pci_add_resource(&resources, &pci_ioport_resource);
+ pci_add_resource(&resources, &pci_iomem_resource);
+ bus = pci_scan_root_bus(NULL, 0, pci_root_ops, NULL, &resources);
+
+ pcibios_irq_init();
+ pcibios_fixup_irqs();
+ pcibios_resource_survey();
+ if (!bus)
+ return 0;
+
+ pci_bus_add_devices(bus);
+ return 0;
+}
+
+arch_initcall(pcibios_init);
+
+char * __init pcibios_setup(char *str)
+{
+ if (!strcmp(str, "off")) {
+ pci_probe = 0;
+ return NULL;
+ }
+ return str;
+}
+
+int pcibios_enable_device(struct pci_dev *dev, int mask)
+{
+ int err;
+
+ if ((err = pci_enable_resources(dev, mask)) < 0)
+ return err;
+ if (!dev->msi_enabled)
+ pcibios_enable_irq(dev);
+ return 0;
+}