diff options
Diffstat (limited to 'kernel/arch/cris/arch-v32/mach-fs')
| -rw-r--r-- | kernel/arch/cris/arch-v32/mach-fs/Kconfig | 19 | ||||
| -rw-r--r-- | kernel/arch/cris/arch-v32/mach-fs/Makefile | 2 | ||||
| -rw-r--r-- | kernel/arch/cris/arch-v32/mach-fs/io.c | 191 | ||||
| -rw-r--r-- | kernel/arch/cris/arch-v32/mach-fs/pinmux.c | 8 |
4 files changed, 7 insertions, 213 deletions
diff --git a/kernel/arch/cris/arch-v32/mach-fs/Kconfig b/kernel/arch/cris/arch-v32/mach-fs/Kconfig index 774de82ab..7d1ab972b 100644 --- a/kernel/arch/cris/arch-v32/mach-fs/Kconfig +++ b/kernel/arch/cris/arch-v32/mach-fs/Kconfig @@ -192,25 +192,6 @@ config ETRAX_DEF_GIO_PE_OUT Configures the initial data for the general port E bits. Most products should use 00000 here. -config ETRAX_DEF_GIO_PV_OE - hex "GIO_PV_OE" - depends on ETRAX_VIRTUAL_GPIO - default "0000" - help - Configures the direction of virtual general port V bits. 1 is out, - 0 is in. This is often totally different depending on the product - used. These bits are used for all kinds of stuff. If you don't know - what to use, it is always safe to put all as inputs, although - floating inputs isn't good. - -config ETRAX_DEF_GIO_PV_OUT - hex "GIO_PV_OUT" - depends on ETRAX_VIRTUAL_GPIO - default "0000" - help - Configures the initial data for the virtual general port V bits. - Most products should use 0000 here. - endmenu endif diff --git a/kernel/arch/cris/arch-v32/mach-fs/Makefile b/kernel/arch/cris/arch-v32/mach-fs/Makefile index 18a227196..0cc6eebac 100644 --- a/kernel/arch/cris/arch-v32/mach-fs/Makefile +++ b/kernel/arch/cris/arch-v32/mach-fs/Makefile @@ -2,7 +2,7 @@ # Makefile for the linux kernel. # -obj-y := dma.o pinmux.o io.o arbiter.o +obj-y := dma.o pinmux.o arbiter.o clean: diff --git a/kernel/arch/cris/arch-v32/mach-fs/io.c b/kernel/arch/cris/arch-v32/mach-fs/io.c deleted file mode 100644 index a6958661f..000000000 --- a/kernel/arch/cris/arch-v32/mach-fs/io.c +++ /dev/null @@ -1,191 +0,0 @@ -/* - * Helper functions for I/O pins. - * - * Copyright (c) 2004-2007 Axis Communications AB. - */ - -#include <linux/types.h> -#include <linux/errno.h> -#include <linux/init.h> -#include <linux/string.h> -#include <linux/ctype.h> -#include <linux/kernel.h> -#include <linux/module.h> -#include <asm/io.h> -#include <mach/pinmux.h> -#include <hwregs/gio_defs.h> - -#ifndef DEBUG -#define DEBUG(x) -#endif - -struct crisv32_ioport crisv32_ioports[] = { - { - (unsigned long *)REG_ADDR(gio, regi_gio, rw_pa_oe), - (unsigned long *)REG_ADDR(gio, regi_gio, rw_pa_dout), - (unsigned long *)REG_ADDR(gio, regi_gio, r_pa_din), - 8 - }, - { - (unsigned long *)REG_ADDR(gio, regi_gio, rw_pb_oe), - (unsigned long *)REG_ADDR(gio, regi_gio, rw_pb_dout), - (unsigned long *)REG_ADDR(gio, regi_gio, r_pb_din), - 18 - }, - { - (unsigned long *)REG_ADDR(gio, regi_gio, rw_pc_oe), - (unsigned long *)REG_ADDR(gio, regi_gio, rw_pc_dout), - (unsigned long *)REG_ADDR(gio, regi_gio, r_pc_din), - 18 - }, - { - (unsigned long *)REG_ADDR(gio, regi_gio, rw_pd_oe), - (unsigned long *)REG_ADDR(gio, regi_gio, rw_pd_dout), - (unsigned long *)REG_ADDR(gio, regi_gio, r_pd_din), - 18 - }, - { - (unsigned long *)REG_ADDR(gio, regi_gio, rw_pe_oe), - (unsigned long *)REG_ADDR(gio, regi_gio, rw_pe_dout), - (unsigned long *)REG_ADDR(gio, regi_gio, r_pe_din), - 18 - } -}; - -#define NBR_OF_PORTS ARRAY_SIZE(crisv32_ioports) - -struct crisv32_iopin crisv32_led_net0_green; -struct crisv32_iopin crisv32_led_net0_red; -struct crisv32_iopin crisv32_led_net1_green; -struct crisv32_iopin crisv32_led_net1_red; -struct crisv32_iopin crisv32_led2_green; -struct crisv32_iopin crisv32_led2_red; -struct crisv32_iopin crisv32_led3_green; -struct crisv32_iopin crisv32_led3_red; - -/* Dummy port used when green LED and red LED is on the same bit */ -static unsigned long io_dummy; -static struct crisv32_ioport dummy_port = { - &io_dummy, - &io_dummy, - &io_dummy, - 18 -}; -static struct crisv32_iopin dummy_led = { - &dummy_port, - 0 -}; - -static int __init crisv32_io_init(void) -{ - int ret = 0; - - u32 i; - - /* Locks *should* be dynamically initialized. */ - for (i = 0; i < ARRAY_SIZE(crisv32_ioports); i++) - spin_lock_init(&crisv32_ioports[i].lock); - spin_lock_init(&dummy_port.lock); - - /* Initialize LEDs */ -#if (defined(CONFIG_ETRAX_NBR_LED_GRP_ONE) || defined(CONFIG_ETRAX_NBR_LED_GRP_TWO)) - ret += - crisv32_io_get_name(&crisv32_led_net0_green, - CONFIG_ETRAX_LED_G_NET0); - crisv32_io_set_dir(&crisv32_led_net0_green, crisv32_io_dir_out); - if (strcmp(CONFIG_ETRAX_LED_G_NET0, CONFIG_ETRAX_LED_R_NET0)) { - ret += - crisv32_io_get_name(&crisv32_led_net0_red, - CONFIG_ETRAX_LED_R_NET0); - crisv32_io_set_dir(&crisv32_led_net0_red, crisv32_io_dir_out); - } else - crisv32_led_net0_red = dummy_led; -#endif - -#ifdef CONFIG_ETRAX_NBR_LED_GRP_TWO - ret += - crisv32_io_get_name(&crisv32_led_net1_green, - CONFIG_ETRAX_LED_G_NET1); - crisv32_io_set_dir(&crisv32_led_net1_green, crisv32_io_dir_out); - if (strcmp(CONFIG_ETRAX_LED_G_NET1, CONFIG_ETRAX_LED_R_NET1)) { - crisv32_io_get_name(&crisv32_led_net1_red, - CONFIG_ETRAX_LED_R_NET1); - crisv32_io_set_dir(&crisv32_led_net1_red, crisv32_io_dir_out); - } else - crisv32_led_net1_red = dummy_led; -#endif - - ret += crisv32_io_get_name(&crisv32_led2_green, CONFIG_ETRAX_V32_LED2G); - ret += crisv32_io_get_name(&crisv32_led2_red, CONFIG_ETRAX_V32_LED2R); - ret += crisv32_io_get_name(&crisv32_led3_green, CONFIG_ETRAX_V32_LED3G); - ret += crisv32_io_get_name(&crisv32_led3_red, CONFIG_ETRAX_V32_LED3R); - - crisv32_io_set_dir(&crisv32_led2_green, crisv32_io_dir_out); - crisv32_io_set_dir(&crisv32_led2_red, crisv32_io_dir_out); - crisv32_io_set_dir(&crisv32_led3_green, crisv32_io_dir_out); - crisv32_io_set_dir(&crisv32_led3_red, crisv32_io_dir_out); - - return ret; -} - -__initcall(crisv32_io_init); - -int crisv32_io_get(struct crisv32_iopin *iopin, - unsigned int port, unsigned int pin) -{ - if (port > NBR_OF_PORTS) - return -EINVAL; - if (port > crisv32_ioports[port].pin_count) - return -EINVAL; - - iopin->bit = 1 << pin; - iopin->port = &crisv32_ioports[port]; - - /* Only allocate pinmux gpiopins if port != PORT_A (port 0) */ - /* NOTE! crisv32_pinmux_alloc thinks PORT_B is port 0 */ - if (port != 0 && crisv32_pinmux_alloc(port - 1, pin, pin, pinmux_gpio)) - return -EIO; - DEBUG(printk(KERN_DEBUG "crisv32_io_get: Allocated pin %d on port %d\n", - pin, port)); - - return 0; -} - -int crisv32_io_get_name(struct crisv32_iopin *iopin, const char *name) -{ - int port; - int pin; - - if (toupper(*name) == 'P') - name++; - - if (toupper(*name) < 'A' || toupper(*name) > 'E') - return -EINVAL; - - port = toupper(*name) - 'A'; - name++; - pin = simple_strtoul(name, NULL, 10); - - if (pin < 0 || pin > crisv32_ioports[port].pin_count) - return -EINVAL; - - iopin->bit = 1 << pin; - iopin->port = &crisv32_ioports[port]; - - /* Only allocate pinmux gpiopins if port != PORT_A (port 0) */ - /* NOTE! crisv32_pinmux_alloc thinks PORT_B is port 0 */ - if (port != 0 && crisv32_pinmux_alloc(port - 1, pin, pin, pinmux_gpio)) - return -EIO; - - DEBUG(printk(KERN_DEBUG - "crisv32_io_get_name: Allocated pin %d on port %d\n", - pin, port)); - - return 0; -} - -#ifdef CONFIG_PCI -/* PCI I/O access stuff */ -struct cris_io_operations *cris_iops = NULL; -EXPORT_SYMBOL(cris_iops); -#endif diff --git a/kernel/arch/cris/arch-v32/mach-fs/pinmux.c b/kernel/arch/cris/arch-v32/mach-fs/pinmux.c index 05a04708b..d8a3a3c43 100644 --- a/kernel/arch/cris/arch-v32/mach-fs/pinmux.c +++ b/kernel/arch/cris/arch-v32/mach-fs/pinmux.c @@ -46,6 +46,8 @@ static int __crisv32_pinmux_alloc(int port, int first_pin, int last_pin, pins[port][i] = mode; crisv32_pinmux_set(port); + + return 0; } static int crisv32_pinmux_init(void) @@ -93,6 +95,7 @@ int crisv32_pinmux_alloc_fixed(enum fixed_function function) int ret = -EINVAL; char saved[sizeof pins]; unsigned long flags; + reg_pinmux_rw_hwprot hwprot; spin_lock_irqsave(&pinmux_lock, flags); @@ -101,7 +104,7 @@ int crisv32_pinmux_alloc_fixed(enum fixed_function function) crisv32_pinmux_init(); /* Must be done before we read rw_hwprot */ - reg_pinmux_rw_hwprot hwprot = REG_RD(pinmux, regi_pinmux, rw_hwprot); + hwprot = REG_RD(pinmux, regi_pinmux, rw_hwprot); switch (function) { case pinmux_ser1: @@ -227,6 +230,7 @@ int crisv32_pinmux_dealloc_fixed(enum fixed_function function) int ret = -EINVAL; char saved[sizeof pins]; unsigned long flags; + reg_pinmux_rw_hwprot hwprot; spin_lock_irqsave(&pinmux_lock, flags); @@ -235,7 +239,7 @@ int crisv32_pinmux_dealloc_fixed(enum fixed_function function) crisv32_pinmux_init(); /* Must be done before we read rw_hwprot */ - reg_pinmux_rw_hwprot hwprot = REG_RD(pinmux, regi_pinmux, rw_hwprot); + hwprot = REG_RD(pinmux, regi_pinmux, rw_hwprot); switch (function) { case pinmux_ser1: |