1 files changed, 174 insertions, 0 deletions

diff --git a/kernel/arch/cris/arch-v32/drivers/mach-fs/nandflash.c b/kernel/arch/cris/arch-v32/drivers/mach-fs/nandflash.c
new file mode 100644
index 000000000..e03238454
--- /dev/null
+++ b/kernel/arch/cris/arch-v32/drivers/mach-fs/nandflash.c
@@ -0,0 +1,174 @@
+/*
+ *  arch/cris/arch-v32/drivers/nandflash.c
+ *
+ *  Copyright (c) 2004
+ *
+ *  Derived from drivers/mtd/nand/spia.c
+ *	  Copyright (C) 2000 Steven J. Hill (sjhill@realitydiluted.com)
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#include <linux/slab.h>
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/nand.h>
+#include <linux/mtd/partitions.h>
+#include <arch/memmap.h>
+#include <hwregs/reg_map.h>
+#include <hwregs/reg_rdwr.h>
+#include <hwregs/gio_defs.h>
+#include <hwregs/bif_core_defs.h>
+#include <asm/io.h>
+
+#define CE_BIT 4
+#define CLE_BIT 5
+#define ALE_BIT 6
+#define BY_BIT 7
+
+struct mtd_info_wrapper {
+	struct mtd_info info;
+	struct nand_chip chip;
+};
+
+/* Bitmask for control pins */
+#define PIN_BITMASK ((1 << CE_BIT) | (1 << CLE_BIT) | (1 << ALE_BIT))
+
+/* Bitmask for mtd nand control bits */
+#define CTRL_BITMASK (NAND_NCE | NAND_CLE | NAND_ALE)
+
+
+static struct mtd_info *crisv32_mtd;
+/*
+ *	hardware specific access to control-lines
+ */
+static void crisv32_hwcontrol(struct mtd_info *mtd, int cmd,
+			      unsigned int ctrl)
+{
+	unsigned long flags;
+	reg_gio_rw_pa_dout dout;
+	struct nand_chip *this = mtd->priv;
+
+	local_irq_save(flags);
+
+	/* control bits change */
+	if (ctrl & NAND_CTRL_CHANGE) {
+		dout = REG_RD(gio, regi_gio, rw_pa_dout);
+		dout.data &= ~PIN_BITMASK;
+
+#if (CE_BIT == 4 && NAND_NCE == 1 &&  \
+     CLE_BIT == 5 && NAND_CLE == 2 && \
+     ALE_BIT == 6 && NAND_ALE == 4)
+		/* Pins in same order as control bits, but shifted.
+		 * Optimize for this case; works for 2.6.18 */
+		dout.data |= ((ctrl & CTRL_BITMASK) ^ NAND_NCE) << CE_BIT;
+#else
+		/* the slow way */
+		if (!(ctrl & NAND_NCE))
+			dout.data |= (1 << CE_BIT);
+		if (ctrl & NAND_CLE)
+			dout.data |= (1 << CLE_BIT);
+		if (ctrl & NAND_ALE)
+			dout.data |= (1 << ALE_BIT);
+#endif
+		REG_WR(gio, regi_gio, rw_pa_dout, dout);
+	}
+
+	/* command to chip */
+	if (cmd != NAND_CMD_NONE)
+		writeb(cmd, this->IO_ADDR_W);
+
+	local_irq_restore(flags);
+}
+
+/*
+*	read device ready pin
+*/
+static int crisv32_device_ready(struct mtd_info *mtd)
+{
+	reg_gio_r_pa_din din = REG_RD(gio, regi_gio, r_pa_din);
+	return ((din.data & (1 << BY_BIT)) >> BY_BIT);
+}
+
+/*
+ * Main initialization routine
+ */
+struct mtd_info *__init crisv32_nand_flash_probe(void)
+{
+	void __iomem *read_cs;
+	void __iomem *write_cs;
+
+	reg_bif_core_rw_grp3_cfg bif_cfg = REG_RD(bif_core, regi_bif_core,
+		rw_grp3_cfg);
+	reg_gio_rw_pa_oe pa_oe = REG_RD(gio, regi_gio, rw_pa_oe);
+	struct mtd_info_wrapper *wrapper;
+	struct nand_chip *this;
+	int err = 0;
+
+	/* Allocate memory for MTD device structure and private data */
+	wrapper = kzalloc(sizeof(struct mtd_info_wrapper), GFP_KERNEL);
+	if (!wrapper) {
+		printk(KERN_ERR "Unable to allocate CRISv32 NAND MTD "
+			"device structure.\n");
+		err = -ENOMEM;
+		return NULL;
+	}
+
+	read_cs = ioremap(MEM_CSP0_START | MEM_NON_CACHEABLE, 8192);
+	write_cs = ioremap(MEM_CSP1_START | MEM_NON_CACHEABLE, 8192);
+
+	if (!read_cs || !write_cs) {
+		printk(KERN_ERR "CRISv32 NAND ioremap failed\n");
+		err = -EIO;
+		goto out_mtd;
+	}
+
+	/* Get pointer to private data */
+	this = &wrapper->chip;
+	crisv32_mtd = &wrapper->info;
+
+	pa_oe.oe |= 1 << CE_BIT;
+	pa_oe.oe |= 1 << ALE_BIT;
+	pa_oe.oe |= 1 << CLE_BIT;
+	pa_oe.oe &= ~(1 << BY_BIT);
+	REG_WR(gio, regi_gio, rw_pa_oe, pa_oe);
+
+	bif_cfg.gated_csp0 = regk_bif_core_rd;
+	bif_cfg.gated_csp1 = regk_bif_core_wr;
+	REG_WR(bif_core, regi_bif_core, rw_grp3_cfg, bif_cfg);
+
+	/* Link the private data with the MTD structure */
+	crisv32_mtd->priv = this;
+
+	/* Set address of NAND IO lines */
+	this->IO_ADDR_R = read_cs;
+	this->IO_ADDR_W = write_cs;
+	this->cmd_ctrl = crisv32_hwcontrol;
+	this->dev_ready = crisv32_device_ready;
+	/* 20 us command delay time */
+	this->chip_delay = 20;
+	this->ecc.mode = NAND_ECC_SOFT;
+
+	/* Enable the following for a flash based bad block table */
+	/* this->bbt_options = NAND_BBT_USE_FLASH; */
+
+	/* Scan to find existence of the device */
+	if (nand_scan(crisv32_mtd, 1)) {
+		err = -ENXIO;
+		goto out_ior;
+	}
+
+	return crisv32_mtd;
+
+out_ior:
+	iounmap((void *)read_cs);
+	iounmap((void *)write_cs);
+out_mtd:
+	kfree(wrapper);
+	return NULL;
+}
+