summaryrefslogtreecommitdiffstats
path: root/kernel/arch/cris/arch-v32/drivers/Kconfig
diff options
context:
space:
mode:
Diffstat (limited to 'kernel/arch/cris/arch-v32/drivers/Kconfig')
-rw-r--r--kernel/arch/cris/arch-v32/drivers/Kconfig167
1 files changed, 0 insertions, 167 deletions
diff --git a/kernel/arch/cris/arch-v32/drivers/Kconfig b/kernel/arch/cris/arch-v32/drivers/Kconfig
index 4fc16b44f..2735eb767 100644
--- a/kernel/arch/cris/arch-v32/drivers/Kconfig
+++ b/kernel/arch/cris/arch-v32/drivers/Kconfig
@@ -149,173 +149,6 @@ config ETRAX_NANDBOOT
Say Y if your boot code, kernel and root file system is in
NAND flash. Say N if they are in NOR flash.
-config ETRAX_I2C
- bool "I2C driver"
- depends on ETRAX_ARCH_V32
- help
- This option enables the I2C driver used by e.g. the RTC driver.
-
-config ETRAX_V32_I2C_DATA_PORT
- string "I2C data pin"
- depends on ETRAX_I2C
- help
- The pin to use for I2C data.
-
-config ETRAX_V32_I2C_CLK_PORT
- string "I2C clock pin"
- depends on ETRAX_I2C
- help
- The pin to use for I2C clock.
-
-config ETRAX_GPIO
- bool "GPIO support"
- depends on ETRAX_ARCH_V32
- ---help---
- Enables the ETRAX general port device (major 120, minors 0-4).
- You can use this driver to access the general port bits. It supports
- these ioctl's:
- #include <linux/etraxgpio.h>
- fd = open("/dev/gpioa", O_RDWR); // or /dev/gpiob
- ioctl(fd, _IO(ETRAXGPIO_IOCTYPE, IO_SETBITS), bits_to_set);
- ioctl(fd, _IO(ETRAXGPIO_IOCTYPE, IO_CLRBITS), bits_to_clear);
- err = ioctl(fd, _IO(ETRAXGPIO_IOCTYPE, IO_READ_INBITS), &val);
- Remember that you need to setup the port directions appropriately in
- the General configuration.
-
-config ETRAX_VIRTUAL_GPIO
- bool "Virtual GPIO support"
- depends on ETRAX_GPIO
- help
- Enables the virtual Etrax general port device (major 120, minor 6).
- It uses an I/O expander for the I2C-bus.
-
-config ETRAX_VIRTUAL_GPIO_INTERRUPT_PA_PIN
- int "Virtual GPIO interrupt pin on PA pin"
- range 0 7
- depends on ETRAX_VIRTUAL_GPIO
- help
- The pin to use on PA for virtual gpio interrupt.
-
-config ETRAX_PA_CHANGEABLE_DIR
- hex "PA user changeable dir mask"
- depends on ETRAX_GPIO
- default "0x00" if ETRAXFS
- default "0x00000000" if !ETRAXFS
- help
- This is a bitmask (8 bits) with information of what bits in PA that a
- user can change direction on using ioctl's.
- Bit set = changeable.
- You probably want 0 here, but it depends on your hardware.
-
-config ETRAX_PA_CHANGEABLE_BITS
- hex "PA user changeable bits mask"
- depends on ETRAX_GPIO
- default "0x00" if ETRAXFS
- default "0x00000000" if !ETRAXFS
- help
- This is a bitmask (8 bits) with information of what bits in PA
- that a user can change the value on using ioctl's.
- Bit set = changeable.
-
-config ETRAX_PB_CHANGEABLE_DIR
- hex "PB user changeable dir mask"
- depends on ETRAX_GPIO
- default "0x00000" if ETRAXFS
- default "0x00000000" if !ETRAXFS
- help
- This is a bitmask (18 bits) with information of what bits in PB
- that a user can change direction on using ioctl's.
- Bit set = changeable.
- You probably want 0 here, but it depends on your hardware.
-
-config ETRAX_PB_CHANGEABLE_BITS
- hex "PB user changeable bits mask"
- depends on ETRAX_GPIO
- default "0x00000" if ETRAXFS
- default "0x00000000" if !ETRAXFS
- help
- This is a bitmask (18 bits) with information of what bits in PB
- that a user can change the value on using ioctl's.
- Bit set = changeable.
-
-config ETRAX_PC_CHANGEABLE_DIR
- hex "PC user changeable dir mask"
- depends on ETRAX_GPIO
- default "0x00000" if ETRAXFS
- default "0x00000000" if !ETRAXFS
- help
- This is a bitmask (18 bits) with information of what bits in PC
- that a user can change direction on using ioctl's.
- Bit set = changeable.
- You probably want 0 here, but it depends on your hardware.
-
-config ETRAX_PC_CHANGEABLE_BITS
- hex "PC user changeable bits mask"
- depends on ETRAX_GPIO
- default "0x00000" if ETRAXFS
- default "0x00000000" if ETRAXFS
- help
- This is a bitmask (18 bits) with information of what bits in PC
- that a user can change the value on using ioctl's.
- Bit set = changeable.
-
-config ETRAX_PD_CHANGEABLE_DIR
- hex "PD user changeable dir mask"
- depends on ETRAX_GPIO && ETRAXFS
- default "0x00000"
- help
- This is a bitmask (18 bits) with information of what bits in PD
- that a user can change direction on using ioctl's.
- Bit set = changeable.
- You probably want 0x00000 here, but it depends on your hardware.
-
-config ETRAX_PD_CHANGEABLE_BITS
- hex "PD user changeable bits mask"
- depends on ETRAX_GPIO && ETRAXFS
- default "0x00000"
- help
- This is a bitmask (18 bits) with information of what bits in PD
- that a user can change the value on using ioctl's.
- Bit set = changeable.
-
-config ETRAX_PE_CHANGEABLE_DIR
- hex "PE user changeable dir mask"
- depends on ETRAX_GPIO && ETRAXFS
- default "0x00000"
- help
- This is a bitmask (18 bits) with information of what bits in PE
- that a user can change direction on using ioctl's.
- Bit set = changeable.
- You probably want 0x00000 here, but it depends on your hardware.
-
-config ETRAX_PE_CHANGEABLE_BITS
- hex "PE user changeable bits mask"
- depends on ETRAX_GPIO && ETRAXFS
- default "0x00000"
- help
- This is a bitmask (18 bits) with information of what bits in PE
- that a user can change the value on using ioctl's.
- Bit set = changeable.
-
-config ETRAX_PV_CHANGEABLE_DIR
- hex "PV user changeable dir mask"
- depends on ETRAX_VIRTUAL_GPIO
- default "0x0000"
- help
- This is a bitmask (16 bits) with information of what bits in PV
- that a user can change direction on using ioctl's.
- Bit set = changeable.
- You probably want 0x0000 here, but it depends on your hardware.
-
-config ETRAX_PV_CHANGEABLE_BITS
- hex "PV user changeable bits mask"
- depends on ETRAX_VIRTUAL_GPIO
- default "0x0000"
- help
- This is a bitmask (16 bits) with information of what bits in PV
- that a user can change the value on using ioctl's.
- Bit set = changeable.
-
config ETRAX_CARDBUS
bool "Cardbus support"
depends on ETRAX_ARCH_V32