diff options
Diffstat (limited to 'kernel/arch/cris/arch-v10')
43 files changed, 15076 insertions, 0 deletions
diff --git a/kernel/arch/cris/arch-v10/Kconfig b/kernel/arch/cris/arch-v10/Kconfig new file mode 100644 index 000000000..df9a38b4f --- /dev/null +++ b/kernel/arch/cris/arch-v10/Kconfig @@ -0,0 +1,398 @@ +if ETRAX_ARCH_V10 + +menu "CRIS v10 options" + +# ETRAX 100LX v1 has a MMU "feature" requiring a low mapping +config CRIS_LOW_MAP + bool + depends on ETRAX_ARCH_V10 && ETRAX100LX + default y + +config ETRAX_DRAM_VIRTUAL_BASE + hex + depends on ETRAX_ARCH_V10 + default "c0000000" if !ETRAX100LX + default "60000000" if ETRAX100LX + +choice + prompt "Product LED port" + depends on ETRAX_ARCH_V10 + default ETRAX_PA_LEDS + +config ETRAX_PA_LEDS + bool "Port-PA-LEDs" + help + The ETRAX network driver is responsible for flashing LED's when + packets arrive and are sent. It uses macros defined in + <file:arch/cris/include/asm/io.h>, and those macros are defined after + what YOU choose in this option. The actual bits used are configured + separately. Select this if the LEDs are on port PA. Some products + put the leds on PB or a memory-mapped latch (CSP0) instead. + +config ETRAX_PB_LEDS + bool "Port-PB-LEDs" + help + The ETRAX network driver is responsible for flashing LED's when + packets arrive and are sent. It uses macros defined in + <file:arch/cris/include/asm/io.h>, and those macros are defined after + what YOU choose in this option. The actual bits used are configured + separately. Select this if the LEDs are on port PB. Some products + put the leds on PA or a memory-mapped latch (CSP0) instead. + +config ETRAX_CSP0_LEDS + bool "Port-CSP0-LEDs" + help + The ETRAX network driver is responsible for flashing LED's when + packets arrive and are sent. It uses macros defined in + <file:arch/cris/include/asm/io.h>, and those macros are defined after + what YOU choose in this option. The actual bits used are configured + separately. Select this if the LEDs are on a memory-mapped latch + using chip select CSP0, this is mapped at 0x90000000. + Some products put the leds on PA or PB instead. + +config ETRAX_NO_LEDS + bool "None" + help + Select this option if you don't have any LED at all. + +endchoice + +config ETRAX_LED1G + int "First green LED bit" + depends on ETRAX_ARCH_V10 && !ETRAX_NO_LEDS + default "2" + help + Bit to use for the first green LED. + Most Axis products use bit 2 here. + +config ETRAX_LED1R + int "First red LED bit" + depends on ETRAX_ARCH_V10 && !ETRAX_NO_LEDS + default "3" + help + Bit to use for the first red LED. + Most Axis products use bit 3 here. + For products with only one controllable LED, + set this to same as CONFIG_ETRAX_LED1G (normally 2). + +config ETRAX_LED2G + int "Second green LED bit" + depends on ETRAX_ARCH_V10 && !ETRAX_NO_LEDS + default "4" + help + Bit to use for the second green LED. The "Active" LED. + Most Axis products use bit 4 here. + For products with only one controllable LED, + set this to same as CONFIG_ETRAX_LED1G (normally 2). + +config ETRAX_LED2R + int "Second red LED bit" + depends on ETRAX_ARCH_V10 && !ETRAX_NO_LEDS + default "5" + help + Bit to use for the second red LED. + Most Axis products use bit 5 here. + For products with only one controllable LED, + set this to same as CONFIG_ETRAX_LED1G (normally 2). + +config ETRAX_LED3G + int "Third green LED bit" + depends on ETRAX_ARCH_V10 && !ETRAX_NO_LEDS + default "2" + help + Bit to use for the third green LED. The "Drive" LED. + For products with only one or two controllable LEDs, + set this to same as CONFIG_ETRAX_LED1G (normally 2). + +config ETRAX_LED3R + int "Third red LED bit" + depends on ETRAX_ARCH_V10 && !ETRAX_NO_LEDS + default "2" + help + Bit to use for the third red LED. + For products with only one or two controllable LEDs, + set this to same as CONFIG_ETRAX_LED1G (normally 2). + +config ETRAX_LED4R + int "Fourth red LED bit" + depends on ETRAX_CSP0_LEDS + default "2" + help + Bit to use for the fourth red LED. + For products with only one or two controllable LEDs, + set this to same as CONFIG_ETRAX_LED1G (normally 2). + +config ETRAX_LED4G + int "Fourth green LED bit" + depends on ETRAX_CSP0_LEDS + default "2" + help + Bit to use for the fourth green LED. + For products with only one or two controllable LEDs, + set this to same as CONFIG_ETRAX_LED1G (normally 2). + +config ETRAX_LED5R + int "Fifth red LED bit" + depends on ETRAX_CSP0_LEDS + default "2" + help + Bit to use for the fifth red LED. + For products with only one or two controllable LEDs, + set this to same as CONFIG_ETRAX_LED1G (normally 2). + +config ETRAX_LED5G + int "Fifth green LED bit" + depends on ETRAX_CSP0_LEDS + default "2" + help + Bit to use for the fifth green LED. + For products with only one or two controllable LEDs, + set this to same as CONFIG_ETRAX_LED1G (normally 2). + +config ETRAX_LED6R + int "Sixth red LED bit" + depends on ETRAX_CSP0_LEDS + default "2" + help + Bit to use for the sixth red LED. + For products with only one or two controllable LEDs, + set this to same as CONFIG_ETRAX_LED1G (normally 2). + +config ETRAX_LED6G + int "Sixth green LED bit" + depends on ETRAX_CSP0_LEDS + default "2" + help + Bit to use for the sixth green LED. The "Drive" LED. + For products with only one or two controllable LEDs, + set this to same as CONFIG_ETRAX_LED1G (normally 2). + +config ETRAX_LED7R + int "Seventh red LED bit" + depends on ETRAX_CSP0_LEDS + default "2" + help + Bit to use for the seventh red LED. + For products with only one or two controllable LEDs, + set this to same as CONFIG_ETRAX_LED1G (normally 2). + +config ETRAX_LED7G + int "Seventh green LED bit" + depends on ETRAX_CSP0_LEDS + default "2" + help + Bit to use for the seventh green LED. + For products with only one or two controllable LEDs, + set this to same as CONFIG_ETRAX_LED1G (normally 2). + +config ETRAX_LED8Y + int "Eighth yellow LED bit" + depends on ETRAX_CSP0_LEDS + default "2" + help + Bit to use for the eighth yellow LED. The "Drive" LED. + For products with only one or two controllable LEDs, + set this to same as CONFIG_ETRAX_LED1G (normally 2). + +config ETRAX_LED9Y + int "Ninth yellow LED bit" + depends on ETRAX_CSP0_LEDS + default "2" + help + Bit to use for the ninth yellow LED. + For products with only one or two controllable LEDs, + set this to same as CONFIG_ETRAX_LED1G (normally 2). + +config ETRAX_LED10Y + int "Tenth yellow LED bit" + depends on ETRAX_CSP0_LEDS + default "2" + help + Bit to use for the tenth yellow LED. + For products with only one or two controllable LEDs, + set this to same as CONFIG_ETRAX_LED1G (normally 2). + +config ETRAX_LED11Y + int "Eleventh yellow LED bit" + depends on ETRAX_CSP0_LEDS + default "2" + help + Bit to use for the eleventh yellow LED. + For products with only one or two controllable LEDs, + set this to same as CONFIG_ETRAX_LED1G (normally 2). + +config ETRAX_LED12R + int "Twelfth red LED bit" + depends on ETRAX_CSP0_LEDS + default "2" + help + Bit to use for the twelfth red LED. + For products with only one or two controllable LEDs, + set this to same as CONFIG_ETRAX_LED1G (normally 2). + + +choice + prompt "Product rescue-port" + depends on ETRAX_ARCH_V10 + default ETRAX_RESCUE_SER0 + +config ETRAX_RESCUE_SER0 + bool "Serial-0" + help + Select one of the four serial ports as a rescue port. The default + is port 0. + +config ETRAX_RESCUE_SER1 + bool "Serial-1" + help + Use serial port 1 as the rescue port. + +config ETRAX_RESCUE_SER2 + bool "Serial-2" + help + Use serial port 2 as the rescue port. + +config ETRAX_RESCUE_SER3 + bool "Serial-3" + help + Use serial port 3 as the rescue port. + +endchoice + +config ETRAX_DEF_R_WAITSTATES + hex "R_WAITSTATES" + depends on ETRAX_ARCH_V10 + default "95a6" + help + Waitstates for SRAM, Flash and peripherals (not DRAM). 95f8 is a + good choice for most Axis products... + +config ETRAX_DEF_R_BUS_CONFIG + hex "R_BUS_CONFIG" + depends on ETRAX_ARCH_V10 + default "104" + help + Assorted bits controlling write mode, DMA burst length etc. 104 is + a good choice for most Axis products... + +config ETRAX_SDRAM + bool "SDRAM support" + depends on ETRAX_ARCH_V10 + help + Enable this if you use SDRAM chips and configure + R_SDRAM_CONFIG and R_SDRAM_TIMING as well. + +config ETRAX_DEF_R_DRAM_CONFIG + hex "R_DRAM_CONFIG" + depends on ETRAX_ARCH_V10 && !ETRAX_SDRAM + default "1a200040" + help + The R_DRAM_CONFIG register specifies everything on how the DRAM + chips in the system are connected to the ETRAX CPU. This is + different depending on the manufacturer, chip type and number of + chips. So this value often needs to be different for each Axis + product. + +config ETRAX_DEF_R_DRAM_TIMING + hex "R_DRAM_TIMING" + depends on ETRAX_ARCH_V10 && !ETRAX_SDRAM + default "5611" + help + Different DRAM chips have different speeds. Current Axis products + use 50ns DRAM chips which can use the timing: 5611. + +config ETRAX_DEF_R_SDRAM_CONFIG + hex "R_SDRAM_CONFIG" + depends on ETRAX_ARCH_V10 && ETRAX_SDRAM + default "d2fa7878" + help + The R_SDRAM_CONFIG register specifies everything on how the SDRAM + chips in the system are connected to the ETRAX CPU. This is + different depending on the manufacturer, chip type and number of + chips. So this value often needs to be different for each Axis + product. + +config ETRAX_DEF_R_SDRAM_TIMING + hex "R_SDRAM_TIMING" + depends on ETRAX_ARCH_V10 && ETRAX_SDRAM + default "80004801" + help + Different SDRAM chips have different timing. + +config ETRAX_DEF_R_PORT_PA_DIR + hex "R_PORT_PA_DIR" + depends on ETRAX_ARCH_V10 + default "1c" + help + Configures the direction of general port A bits. 1 is out, 0 is in. + This is often totally different depending on the product used. + There are some guidelines though - if you know that only LED's are + connected to port PA, then they are usually connected to bits 2-4 + and you can therefore use 1c. On other boards which don't have the + LED's at the general ports, these bits are used for all kinds of + stuff. If you don't know what to use, it is always safe to put all + as inputs, although floating inputs isn't good. + +config ETRAX_DEF_R_PORT_PA_DATA + hex "R_PORT_PA_DATA" + depends on ETRAX_ARCH_V10 + default "00" + help + Configures the initial data for the general port A bits. Most + products should use 00 here. + +config ETRAX_DEF_R_PORT_PB_CONFIG + hex "R_PORT_PB_CONFIG" + depends on ETRAX_ARCH_V10 + default "00" + help + Configures the type of the general port B bits. 1 is chip select, + 0 is port. Most products should use 00 here. + +config ETRAX_DEF_R_PORT_PB_DIR + hex "R_PORT_PB_DIR" + depends on ETRAX_ARCH_V10 + default "00" + help + Configures the direction of general port B bits. 1 is out, 0 is in. + This is often totally different depending on the product used. Bits + 0 and 1 on port PB are usually used for I2C communication, but the + kernel I2C driver sets the appropriate directions itself so you + don't need to take that into consideration when setting this option. + If you don't know what to use, it is always safe to put all as + inputs. + +config ETRAX_DEF_R_PORT_PB_DATA + hex "R_PORT_PB_DATA" + depends on ETRAX_ARCH_V10 + default "ff" + help + Configures the initial data for the general port A bits. Most + products should use FF here. + +config ETRAX_SOFT_SHUTDOWN + bool "Software Shutdown Support" + depends on ETRAX_ARCH_V10 + help + Enable this if ETRAX is used with a power-supply that can be turned + off and on with PS_ON signal. Gives the possibility to detect + powerbutton and then do a power off after unmounting disks. + +config ETRAX_SHUTDOWN_BIT + int "Shutdown bit on port CSP0" + depends on ETRAX_SOFT_SHUTDOWN + default "12" + help + Configure what pin on CSPO-port that is used for controlling power + supply. + +config ETRAX_POWERBUTTON_BIT + int "Power button bit on port G" + depends on ETRAX_SOFT_SHUTDOWN + default "25" + help + Configure where power button is connected. + +endmenu + +endif diff --git a/kernel/arch/cris/arch-v10/README.mm b/kernel/arch/cris/arch-v10/README.mm new file mode 100644 index 000000000..67731d75c --- /dev/null +++ b/kernel/arch/cris/arch-v10/README.mm @@ -0,0 +1,244 @@ +Memory management for CRIS/MMU +------------------------------ +HISTORY: + +$Log: README.mm,v $ +Revision 1.1 2001/12/17 13:59:27 bjornw +Initial revision + +Revision 1.1 2000/07/10 16:25:21 bjornw +Initial revision + +Revision 1.4 2000/01/17 02:31:59 bjornw +Added discussion of paging and VM. + +Revision 1.3 1999/12/03 16:43:23 hp +Blurb about that the 3.5G-limitation is not a MMU limitation + +Revision 1.2 1999/12/03 16:04:21 hp +Picky comment about not mapping the first page + +Revision 1.1 1999/12/03 15:41:30 bjornw +First version of CRIS/MMU memory layout specification. + + + + + +------------------------------ + +See the ETRAX-NG HSDD for reference. + +We use the page-size of 8 kbytes, as opposed to the i386 page-size of 4 kbytes. + +The MMU can, apart from the normal mapping of pages, also do a top-level +segmentation of the kernel memory space. We use this feature to avoid having +to use page-tables to map the physical memory into the kernel's address +space. We also use it to keep the user-mode virtual mapping in the same +map during kernel-mode, so that the kernel easily can access the corresponding +user-mode process' data. + +As a comparison, the Linux/i386 2.0 puts the kernel and physical RAM at +address 0, overlapping with the user-mode virtual space, so that descriptor +registers are needed for each memory access to specify which MMU space to +map through. That changed in 2.2, putting the kernel/physical RAM at +0xc0000000, to co-exist with the user-mode mapping. We will do something +quite similar, but with the additional complexity of having to map the +internal chip I/O registers and the flash memory area (including SRAM +and peripherial chip-selets). + +The kernel-mode segmentation map: + + ------------------------ ------------------------ +FFFFFFFF| | => cached | | + | kernel seg_f | flash | | +F0000000|______________________| | | +EFFFFFFF| | => uncached | | + | kernel seg_e | flash | | +E0000000|______________________| | DRAM | +DFFFFFFF| | paged to any | Un-cached | + | kernel seg_d | =======> | | +D0000000|______________________| | | +CFFFFFFF| | | | + | kernel seg_c |==\ | | +C0000000|______________________| \ |______________________| +BFFFFFFF| | uncached | | + | kernel seg_b |=====\=========>| Registers | +B0000000|______________________| \c |______________________| +AFFFFFFF| | \a | | + | | \c | FLASH/SRAM/Peripheral| + | | \h |______________________| + | | \e | | + | | \d | | + | kernel seg_0 - seg_a | \==>| DRAM | + | | | Cached | + | | paged to any | | + | | =======> |______________________| + | | | | + | | | Illegal | + | | |______________________| + | | | | + | | | FLASH/SRAM/Peripheral| +00000000|______________________| |______________________| + +In user-mode it looks the same except that only the space 0-AFFFFFFF is +available. Therefore, in this model, the virtual address space per process +is limited to 0xb0000000 bytes (minus 8192 bytes, since the first page, +0..8191, is never mapped, in order to trap NULL references). + +It also means that the total physical RAM that can be mapped is 256 MB +(kseg_c above). More RAM can be mapped by choosing a different segmentation +and shrinking the user-mode memory space. + +The MMU can map all 4 GB in user mode, but doing that would mean that a +few extra instructions would be needed for each access to user mode +memory. + +The kernel needs access to both cached and uncached flash. Uncached is +necessary because of the special write/erase sequences. Also, the +peripherial chip-selects are decoded from that region. + +The kernel also needs its own virtual memory space. That is kseg_d. It +is used by the vmalloc() kernel function to allocate virtual contiguous +chunks of memory not possible using the normal kmalloc physical RAM +allocator. + +The setting of the actual MMU control registers to use this layout would +be something like this: + +R_MMU_KSEG = ( ( seg_f, seg ) | // Flash cached + ( seg_e, seg ) | // Flash uncached + ( seg_d, page ) | // kernel vmalloc area + ( seg_c, seg ) | // kernel linear segment + ( seg_b, seg ) | // kernel linear segment + ( seg_a, page ) | + ( seg_9, page ) | + ( seg_8, page ) | + ( seg_7, page ) | + ( seg_6, page ) | + ( seg_5, page ) | + ( seg_4, page ) | + ( seg_3, page ) | + ( seg_2, page ) | + ( seg_1, page ) | + ( seg_0, page ) ); + +R_MMU_KBASE_HI = ( ( base_f, 0x0 ) | // flash/sram/periph cached + ( base_e, 0x8 ) | // flash/sram/periph uncached + ( base_d, 0x0 ) | // don't care + ( base_c, 0x4 ) | // physical RAM cached area + ( base_b, 0xb ) | // uncached on-chip registers + ( base_a, 0x0 ) | // don't care + ( base_9, 0x0 ) | // don't care + ( base_8, 0x0 ) ); // don't care + +R_MMU_KBASE_LO = ( ( base_7, 0x0 ) | // don't care + ( base_6, 0x0 ) | // don't care + ( base_5, 0x0 ) | // don't care + ( base_4, 0x0 ) | // don't care + ( base_3, 0x0 ) | // don't care + ( base_2, 0x0 ) | // don't care + ( base_1, 0x0 ) | // don't care + ( base_0, 0x0 ) ); // don't care + +NOTE: while setting up the MMU, we run in a non-mapped mode in the DRAM (0x40 +segment) and need to setup the seg_4 to a unity mapping, so that we don't get +a fault before we have had time to jump into the real kernel segment (0xc0). This +is done in head.S temporarily, but fixed by the kernel later in paging_init. + + +Paging - PTE's, PMD's and PGD's +------------------------------- + +[ References: asm/pgtable.h, asm/page.h, asm/mmu.h ] + +The paging mechanism uses virtual addresses to split a process memory-space into +pages, a page being the smallest unit that can be freely remapped in memory. On +Linux/CRIS, a page is 8192 bytes (for technical reasons not equal to 4096 as in +most other 32-bit architectures). It would be inefficient to let a virtual memory +mapping be controlled by a long table of page mappings, so it is broken down into +a 2-level structure with a Page Directory containing pointers to Page Tables which +each have maps of up to 2048 pages (8192 / sizeof(void *)). Linux can actually +handle 3-level structures as well, with a Page Middle Directory in between, but +in many cases, this is folded into a two-level structure by excluding the Middle +Directory. + +We'll take a look at how an address is translated while we discuss how it's handled +in the Linux kernel. + +The example address is 0xd004000c; in binary this is: + +31 23 15 7 0 +11010000 00000100 00000000 00001100 + +|______| |__________||____________| + PGD PTE page offset + +Given the top-level Page Directory, the offset in that directory is calculated +using the upper 8 bits: + +static inline pgd_t * pgd_offset(struct mm_struct * mm, unsigned long address) +{ + return mm->pgd + (address >> PGDIR_SHIFT); +} + +PGDIR_SHIFT is the log2 of the amount of memory an entry in the PGD can map; in our +case it is 24, corresponding to 16 MB. This means that each entry in the PGD +corresponds to 16 MB of virtual memory. + +The pgd_t from our example will therefore be the 208'th (0xd0) entry in mm->pgd. + +Since the Middle Directory does not exist, it is a unity mapping: + +static inline pmd_t * pmd_offset(pgd_t * dir, unsigned long address) +{ + return (pmd_t *) dir; +} + +The Page Table provides the final lookup by using bits 13 to 23 as index: + +static inline pte_t * pte_offset(pmd_t * dir, unsigned long address) +{ + return (pte_t *) pmd_page(*dir) + ((address >> PAGE_SHIFT) & + (PTRS_PER_PTE - 1)); +} + +PAGE_SHIFT is the log2 of the size of a page; 13 in our case. PTRS_PER_PTE is +the number of pointers that fit in a Page Table and is used to mask off the +PGD-part of the address. + +The so-far unused bits 0 to 12 are used to index inside a page linearily. + +The VM system +------------- + +The kernels own page-directory is the swapper_pg_dir, cleared in paging_init, +and contains the kernels virtual mappings (the kernel itself is not paged - it +is mapped linearily using kseg_c as described above). Architectures without +kernel segments like the i386, need to setup swapper_pg_dir directly in head.S +to map the kernel itself. swapper_pg_dir is pointed to by init_mm.pgd as the +init-task's PGD. + +To see what support functions are used to setup a page-table, let's look at the +kernel's internal paged memory system, vmalloc/vfree. + +void * vmalloc(unsigned long size) + +The vmalloc-system keeps a paged segment in kernel-space at 0xd0000000. What +happens first is that a virtual address chunk is allocated to the request using +get_vm_area(size). After that, physical RAM pages are allocated and put into +the kernel's page-table using alloc_area_pages(addr, size). + +static int alloc_area_pages(unsigned long address, unsigned long size) + +First the PGD entry is found using init_mm.pgd. This is passed to +alloc_area_pmd (remember the 3->2 folding). It uses pte_alloc_kernel to +check if the PGD entry points anywhere - if not, a page table page is +allocated and the PGD entry updated. Then the alloc_area_pte function is +used just like alloc_area_pmd to check which page table entry is desired, +and a physical page is allocated and the table entry updated. All of this +is repeated at the top-level until the entire address range specified has +been mapped. + + + diff --git a/kernel/arch/cris/arch-v10/drivers/Kconfig b/kernel/arch/cris/arch-v10/drivers/Kconfig new file mode 100644 index 000000000..239dab0b9 --- /dev/null +++ b/kernel/arch/cris/arch-v10/drivers/Kconfig @@ -0,0 +1,560 @@ +if ETRAX_ARCH_V10 + +config ETRAX_ETHERNET + bool "Ethernet support" + depends on ETRAX_ARCH_V10 && NETDEVICES + select MII + help + This option enables the ETRAX 100LX built-in 10/100Mbit Ethernet + controller. + +config ETRAX_SERIAL + bool "Serial-port support" + depends on ETRAX_ARCH_V10 + help + Enables the ETRAX 100 serial driver for ser0 (ttyS0) + You probably want this enabled. + +config ETRAX_SERIAL_FAST_TIMER + bool "Use fast timers for serial DMA flush (experimental)" + depends on ETRAX_SERIAL + help + Select this to have the serial DMAs flushed at a higher rate than + normally, possible by using the fast timer API, the timeout is + approx. 4 character times. + If unsure, say N. + +config ETRAX_SERIAL_FLUSH_DMA_FAST + bool "Fast serial port DMA flush" + depends on ETRAX_SERIAL && !ETRAX_SERIAL_FAST_TIMER + help + Select this to have the serial DMAs flushed at a higher rate than + normally possible through a fast timer interrupt (currently at + 15360 Hz). + If unsure, say N. + +config ETRAX_SERIAL_RX_TIMEOUT_TICKS + int "Receive flush timeout (ticks) " + depends on ETRAX_SERIAL && !ETRAX_SERIAL_FAST_TIMER && !ETRAX_SERIAL_FLUSH_DMA_FAST + default "5" + help + Number of timer ticks between flush of receive fifo (1 tick = 10ms). + Try 0-3 for low latency applications. Approx 5 for high load + applications (e.g. PPP). Maybe this should be more adaptive some + day... + +config ETRAX_SERIAL_PORT0 + bool "Serial port 0 enabled" + depends on ETRAX_SERIAL + help + Enables the ETRAX 100 serial driver for ser0 (ttyS0) + Normally you want this on, unless you use external DMA 1 that uses + the same DMA channels. + +choice + prompt "Ser0 DTR, RI, DSR and CD assignment" + depends on ETRAX_SERIAL_PORT0 + default ETRAX_SER0_DTR_RI_DSR_CD_ON_NONE + +config ETRAX_SER0_DTR_RI_DSR_CD_ON_NONE + bool "No_DTR_RI_DSR_CD" + +config ETRAX_SER0_DTR_RI_DSR_CD_ON_PA + bool "DTR_RI_DSR_CD_on_PA" + +config ETRAX_SER0_DTR_RI_DSR_CD_ON_PB + bool "DTR_RI_DSR_CD_on_PB" + help + Enables the status and control signals DTR, RI, DSR and CD on PB for + ser0. + +config ETRAX_SER0_DTR_RI_DSR_CD_MIXED + bool "DTR_RI_DSR_CD_mixed_on_PA_and_PB" + +endchoice + +config ETRAX_SER0_DTR_ON_PA_BIT + int "Ser0 DTR on PA bit (-1 = not used)" if ETRAX_SER0_DTR_RI_DSR_CD_ON_PA || ETRAX_SER0_DTR_RI_DSR_CD_MIXED + depends on ETRAX_SERIAL_PORT0 + default "-1" if !ETRAX_SER0_DTR_RI_DSR_CD_ON_PA && !ETRAX_SER0_DTR_RI_DSR_CD_MIXED + default "4" if ETRAX_SER0_DTR_RI_DSR_CD_ON_PA || ETRAX_SER0_DTR_RI_DSR_CD_MIXED + +config ETRAX_SER0_RI_ON_PA_BIT + int "Ser0 RI on PA bit (-1 = not used)" if ETRAX_SER0_DTR_RI_DSR_CD_ON_PA || ETRAX_SER0_DTR_RI_DSR_CD_MIXED + depends on ETRAX_SERIAL_PORT0 + default "-1" if !ETRAX_SER0_DTR_RI_DSR_CD_ON_PA && !ETRAX_SER0_DTR_RI_DSR_CD_MIXED + default "5" if ETRAX_SER0_DTR_RI_DSR_CD_ON_PA || ETRAX_SER0_DTR_RI_DSR_CD_MIXED + +config ETRAX_SER0_DSR_ON_PA_BIT + int "Ser0 DSR on PA bit (-1 = not used)" if ETRAX_SER0_DTR_RI_DSR_CD_ON_PA || ETRAX_SER0_DTR_RI_DSR_CD_MIXED + depends on ETRAX_SERIAL_PORT0 + default "-1" if !ETRAX_SER0_DTR_RI_DSR_CD_ON_PA && !ETRAX_SER0_DTR_RI_DSR_CD_MIXED + default "6" if ETRAX_SER0_DTR_RI_DSR_CD_ON_PA || ETRAX_SER0_DTR_RI_DSR_CD_MIXED + +config ETRAX_SER0_CD_ON_PA_BIT + int "Ser0 CD on PA bit (-1 = not used)" if ETRAX_SER0_DTR_RI_DSR_CD_ON_PA || ETRAX_SER0_DTR_RI_DSR_CD_MIXED + depends on ETRAX_SERIAL_PORT0 + default "-1" if !ETRAX_SER0_DTR_RI_DSR_CD_ON_PA && !ETRAX_SER0_DTR_RI_DSR_CD_MIXED + default "7" if ETRAX_SER0_DTR_RI_DSR_CD_ON_PA || ETRAX_SER0_DTR_RI_DSR_CD_MIXED + +config ETRAX_SER0_DTR_ON_PB_BIT + int "Ser0 DTR on PB bit (-1 = not used)" if ETRAX_SER0_DTR_RI_DSR_CD_ON_PB || ETRAX_SER0_DTR_RI_DSR_CD_MIXED + depends on ETRAX_SERIAL_PORT0 + default "-1" if !ETRAX_SER0_DTR_RI_DSR_CD_ON_PB && !ETRAX_SER0_DTR_RI_DSR_CD_MIXED + default "4" if ETRAX_SER0_DTR_RI_DSR_CD_ON_PB || ETRAX_SER0_DTR_RI_DSR_CD_MIXED + help + Specify the pin of the PB port to carry the DTR signal for serial + port 0. + +config ETRAX_SER0_RI_ON_PB_BIT + int "Ser0 RI on PB bit (-1 = not used)" if ETRAX_SER0_DTR_RI_DSR_CD_ON_PB || ETRAX_SER0_DTR_RI_DSR_CD_MIXED + depends on ETRAX_SERIAL_PORT0 + default "-1" if !ETRAX_SER0_DTR_RI_DSR_CD_ON_PB && !ETRAX_SER0_DTR_RI_DSR_CD_MIXED + default "5" if ETRAX_SER0_DTR_RI_DSR_CD_ON_PB || ETRAX_SER0_DTR_RI_DSR_CD_MIXED + help + Specify the pin of the PB port to carry the RI signal for serial + port 0. + +config ETRAX_SER0_DSR_ON_PB_BIT + int "Ser0 DSR on PB bit (-1 = not used)" if ETRAX_SER0_DTR_RI_DSR_CD_ON_PB || ETRAX_SER0_DTR_RI_DSR_CD_MIXED + depends on ETRAX_SERIAL_PORT0 + default "-1" if !ETRAX_SER0_DTR_RI_DSR_CD_ON_PB && !ETRAX_SER0_DTR_RI_DSR_CD_MIXED + default "6" if ETRAX_SER0_DTR_RI_DSR_CD_ON_PB || ETRAX_SER0_DTR_RI_DSR_CD_MIXED + help + Specify the pin of the PB port to carry the DSR signal for serial + port 0. + +config ETRAX_SER0_CD_ON_PB_BIT + int "Ser0 CD on PB bit (-1 = not used)" if ETRAX_SER0_DTR_RI_DSR_CD_ON_PB || ETRAX_SER0_DTR_RI_DSR_CD_MIXED + depends on ETRAX_SERIAL_PORT0 + default "-1" if !ETRAX_SER0_DTR_RI_DSR_CD_ON_PB && !ETRAX_SER0_DTR_RI_DSR_CD_MIXED + default "7" if ETRAX_SER0_DTR_RI_DSR_CD_ON_PB || ETRAX_SER0_DTR_RI_DSR_CD_MIXED + help + Specify the pin of the PB port to carry the CD signal for serial + port 0. + +config ETRAX_SERIAL_PORT1 + bool "Serial port 1 enabled" + depends on ETRAX_SERIAL + help + Enables the ETRAX 100 serial driver for ser1 (ttyS1). + +choice + prompt "Ser1 DTR, RI, DSR and CD assignment" + depends on ETRAX_SERIAL_PORT1 + default ETRAX_SER1_DTR_RI_DSR_CD_ON_NONE + +config ETRAX_SER1_DTR_RI_DSR_CD_ON_NONE + bool "No_DTR_RI_DSR_CD" + +config ETRAX_SER1_DTR_RI_DSR_CD_ON_PA + bool "DTR_RI_DSR_CD_on_PA" + +config ETRAX_SER1_DTR_RI_DSR_CD_ON_PB + bool "DTR_RI_DSR_CD_on_PB" + help + Enables the status and control signals DTR, RI, DSR and CD on PB for + ser1. + +config ETRAX_SER1_DTR_RI_DSR_CD_MIXED + bool "DTR_RI_DSR_CD_mixed_on_PA_and_PB" + +endchoice + +config ETRAX_SER1_DTR_ON_PA_BIT + int "Ser1 DTR on PA bit (-1 = not used)" if ETRAX_SER1_DTR_RI_DSR_CD_ON_PA || ETRAX_SER1_DTR_RI_DSR_CD_MIXED + depends on ETRAX_SERIAL_PORT1 + default "-1" if !ETRAX_SER1_DTR_RI_DSR_CD_ON_PA && !ETRAX_SER1_DTR_RI_DSR_CD_MIXED + default "4" if ETRAX_SER1_DTR_RI_DSR_CD_ON_PA || ETRAX_SER1_DTR_RI_DSR_CD_MIXED + +config ETRAX_SER1_RI_ON_PA_BIT + int "Ser1 RI on PA bit (-1 = not used)" if ETRAX_SER1_DTR_RI_DSR_CD_ON_PA || ETRAX_SER1_DTR_RI_DSR_CD_MIXED + depends on ETRAX_SERIAL_PORT1 + default "-1" if !ETRAX_SER1_DTR_RI_DSR_CD_ON_PA && !ETRAX_SER1_DTR_RI_DSR_CD_MIXED + default "5" if ETRAX_SER1_DTR_RI_DSR_CD_ON_PA || ETRAX_SER1_DTR_RI_DSR_CD_MIXED + +config ETRAX_SER1_DSR_ON_PA_BIT + int "Ser1 DSR on PA bit (-1 = not used)" if ETRAX_SER1_DTR_RI_DSR_CD_ON_PA || ETRAX_SER1_DTR_RI_DSR_CD_MIXED + depends on ETRAX_SERIAL_PORT1 + default "-1" if !ETRAX_SER1_DTR_RI_DSR_CD_ON_PA && !ETRAX_SER1_DTR_RI_DSR_CD_MIXED + default "6" if ETRAX_SER1_DTR_RI_DSR_CD_ON_PA || ETRAX_SER1_DTR_RI_DSR_CD_MIXED + +config ETRAX_SER1_CD_ON_PA_BIT + int "Ser1 CD on PA bit (-1 = not used)" if ETRAX_SER1_DTR_RI_DSR_CD_ON_PA || ETRAX_SER1_DTR_RI_DSR_CD_MIXED + depends on ETRAX_SERIAL_PORT1 + default "-1" if !ETRAX_SER1_DTR_RI_DSR_CD_ON_PA && !ETRAX_SER1_DTR_RI_DSR_CD_MIXED + default "7" if ETRAX_SER1_DTR_RI_DSR_CD_ON_PA || ETRAX_SER1_DTR_RI_DSR_CD_MIXED + +config ETRAX_SER1_DTR_ON_PB_BIT + int "Ser1 DTR on PB bit (-1 = not used)" if ETRAX_SER1_DTR_RI_DSR_CD_ON_PB || ETRAX_SER1_DTR_RI_DSR_CD_MIXED + depends on ETRAX_SERIAL_PORT1 + default "-1" if !ETRAX_SER1_DTR_RI_DSR_CD_ON_PB && !ETRAX_SER1_DTR_RI_DSR_CD_MIXED + default "4" if ETRAX_SER1_DTR_RI_DSR_CD_ON_PB || ETRAX_SER1_DTR_RI_DSR_CD_MIXED + help + Specify the pin of the PB port to carry the DTR signal for serial + port 1. + +config ETRAX_SER1_RI_ON_PB_BIT + int "Ser1 RI on PB bit (-1 = not used)" if ETRAX_SER1_DTR_RI_DSR_CD_ON_PB || ETRAX_SER1_DTR_RI_DSR_CD_MIXED + depends on ETRAX_SERIAL_PORT1 + default "-1" if !ETRAX_SER1_DTR_RI_DSR_CD_ON_PB && !ETRAX_SER1_DTR_RI_DSR_CD_MIXED + default "5" if ETRAX_SER1_DTR_RI_DSR_CD_ON_PB || ETRAX_SER1_DTR_RI_DSR_CD_MIXED + help + Specify the pin of the PB port to carry the RI signal for serial + port 1. + +config ETRAX_SER1_DSR_ON_PB_BIT + int "Ser1 DSR on PB bit (-1 = not used)" if ETRAX_SER1_DTR_RI_DSR_CD_ON_PB || ETRAX_SER1_DTR_RI_DSR_CD_MIXED + depends on ETRAX_SERIAL_PORT1 + default "-1" if !ETRAX_SER1_DTR_RI_DSR_CD_ON_PB && !ETRAX_SER1_DTR_RI_DSR_CD_MIXED + default "6" if ETRAX_SER1_DTR_RI_DSR_CD_ON_PB || ETRAX_SER1_DTR_RI_DSR_CD_MIXED + help + Specify the pin of the PB port to carry the DSR signal for serial + port 1. + +config ETRAX_SER1_CD_ON_PB_BIT + int "Ser1 CD on PB bit (-1 = not used)" if ETRAX_SER1_DTR_RI_DSR_CD_ON_PB || ETRAX_SER1_DTR_RI_DSR_CD_MIXED + depends on ETRAX_SERIAL_PORT1 + default "-1" if !ETRAX_SER1_DTR_RI_DSR_CD_ON_PB && !ETRAX_SER1_DTR_RI_DSR_CD_MIXED + default "7" if ETRAX_SER1_DTR_RI_DSR_CD_ON_PB || ETRAX_SER1_DTR_RI_DSR_CD_MIXED + help + Specify the pin of the PB port to carry the CD signal for serial + port 1. + +comment "Make sure you do not have the same PB bits more than once!" + depends on ETRAX_SERIAL && ETRAX_SER0_DTR_RI_DSR_CD_ON_PB && ETRAX_SER1_DTR_RI_DSR_CD_ON_PB + +config ETRAX_SERIAL_PORT2 + bool "Serial port 2 enabled" + depends on ETRAX_SERIAL + help + Enables the ETRAX 100 serial driver for ser2 (ttyS2). + +choice + prompt "Ser2 DTR, RI, DSR and CD assignment" + depends on ETRAX_SERIAL_PORT2 + default ETRAX_SER2_DTR_RI_DSR_CD_ON_NONE + +config ETRAX_SER2_DTR_RI_DSR_CD_ON_NONE + bool "No_DTR_RI_DSR_CD" + +config ETRAX_SER2_DTR_RI_DSR_CD_ON_PA + bool "DTR_RI_DSR_CD_on_PA" + help + Enables the status and control signals DTR, RI, DSR and CD on PA for + ser2. + +config ETRAX_SER2_DTR_RI_DSR_CD_ON_PB + bool "DTR_RI_DSR_CD_on_PB" + +config ETRAX_SER2_DTR_RI_DSR_CD_MIXED + bool "DTR_RI_DSR_CD_mixed_on_PA_and_PB" + +endchoice + +config ETRAX_SER2_DTR_ON_PA_BIT + int "Ser2 DTR on PA bit (-1 = not used)" if ETRAX_SER2_DTR_RI_DSR_CD_ON_PA || ETRAX_SER2_DTR_RI_DSR_CD_MIXED + depends on ETRAX_SERIAL_PORT2 + default "-1" if !ETRAX_SER2_DTR_RI_DSR_CD_ON_PA && !ETRAX_SER2_DTR_RI_DSR_CD_MIXED + default "4" if ETRAX_SER2_DTR_RI_DSR_CD_ON_PA || ETRAX_SER2_DTR_RI_DSR_CD_MIXED + help + Specify the pin of the PA port to carry the DTR signal for serial + port 2. + +config ETRAX_SER2_RI_ON_PA_BIT + int "Ser2 RI on PA bit (-1 = not used)" if ETRAX_SER2_DTR_RI_DSR_CD_ON_PA || ETRAX_SER2_DTR_RI_DSR_CD_MIXED + depends on ETRAX_SERIAL_PORT2 + default "-1" if !ETRAX_SER2_DTR_RI_DSR_CD_ON_PA && !ETRAX_SER2_DTR_RI_DSR_CD_MIXED + default "5" if ETRAX_SER2_DTR_RI_DSR_CD_ON_PA || ETRAX_SER2_DTR_RI_DSR_CD_MIXED + help + Specify the pin of the PA port to carry the RI signal for serial + port 2. + +config ETRAX_SER2_DSR_ON_PA_BIT + int "Ser2 DSR on PA bit (-1 = not used)" if ETRAX_SER2_DTR_RI_DSR_CD_ON_PA || ETRAX_SER2_DTR_RI_DSR_CD_MIXED + depends on ETRAX_SERIAL_PORT2 + default "-1" if !ETRAX_SER2_DTR_RI_DSR_CD_ON_PA && !ETRAX_SER2_DTR_RI_DSR_CD_MIXED + default "6" if ETRAX_SER2_DTR_RI_DSR_CD_ON_PA || ETRAX_SER2_DTR_RI_DSR_CD_MIXED + help + Specify the pin of the PA port to carry the DTR signal for serial + port 2. + +config ETRAX_SER2_CD_ON_PA_BIT + int "Ser2 CD on PA bit (-1 = not used)" if ETRAX_SER2_DTR_RI_DSR_CD_ON_PA || ETRAX_SER2_DTR_RI_DSR_CD_MIXED + depends on ETRAX_SERIAL_PORT2 + default "-1" if !ETRAX_SER2_DTR_RI_DSR_CD_ON_PA && !ETRAX_SER2_DTR_RI_DSR_CD_MIXED + default "7" if ETRAX_SER2_DTR_RI_DSR_CD_ON_PA || ETRAX_SER2_DTR_RI_DSR_CD_MIXED + help + Specify the pin of the PA port to carry the CD signal for serial + port 2. + +config ETRAX_SER2_DTR_ON_PB_BIT + int "Ser2 DTR on PB bit (-1 = not used)" if ETRAX_SER2_DTR_RI_DSR_CD_ON_PB || ETRAX_SER2_DTR_RI_DSR_CD_MIXED + depends on ETRAX_SERIAL_PORT2 + default "-1" if !ETRAX_SER2_DTR_RI_DSR_CD_ON_PB && !ETRAX_SER2_DTR_RI_DSR_CD_MIXED + default "4" if ETRAX_SER2_DTR_RI_DSR_CD_ON_PB || ETRAX_SER2_DTR_RI_DSR_CD_MIXED + +config ETRAX_SER2_RI_ON_PB_BIT + int "Ser2 RI on PB bit (-1 = not used)" if ETRAX_SER2_DTR_RI_DSR_CD_ON_PB || ETRAX_SER2_DTR_RI_DSR_CD_MIXED + depends on ETRAX_SERIAL_PORT2 + default "-1" if !ETRAX_SER2_DTR_RI_DSR_CD_ON_PB && !ETRAX_SER2_DTR_RI_DSR_CD_MIXED + default "5" if ETRAX_SER2_DTR_RI_DSR_CD_ON_PB || ETRAX_SER2_DTR_RI_DSR_CD_MIXED + +config ETRAX_SER2_DSR_ON_PB_BIT + int "Ser2 DSR on PB bit (-1 = not used)" if ETRAX_SER2_DTR_RI_DSR_CD_ON_PB || ETRAX_SER2_DTR_RI_DSR_CD_MIXED + depends on ETRAX_SERIAL_PORT2 + default "-1" if !ETRAX_SER2_DTR_RI_DSR_CD_ON_PB && !ETRAX_SER2_DTR_RI_DSR_CD_MIXED + default "6" if ETRAX_SER2_DTR_RI_DSR_CD_ON_PB || ETRAX_SER2_DTR_RI_DSR_CD_MIXED + +config ETRAX_SER2_CD_ON_PB_BIT + int "Ser2 CD on PB bit (-1 = not used)" if ETRAX_SER2_DTR_RI_DSR_CD_ON_PB || ETRAX_SER2_DTR_RI_DSR_CD_MIXED + depends on ETRAX_SERIAL_PORT2 + default "-1" if !ETRAX_SER2_DTR_RI_DSR_CD_ON_PB && !ETRAX_SER2_DTR_RI_DSR_CD_MIXED + default "7" if ETRAX_SER2_DTR_RI_DSR_CD_ON_PB || ETRAX_SER2_DTR_RI_DSR_CD_MIXED + +config ETRAX_SERIAL_PORT3 + bool "Serial port 3 enabled" + depends on ETRAX_SERIAL + help + Enables the ETRAX 100 serial driver for ser3 (ttyS3). + +choice + prompt "Ser3 DTR, RI, DSR and CD assignment" + depends on ETRAX_SERIAL_PORT3 + default ETRAX_SER3_DTR_RI_DSR_CD_ON_NONE + +config ETRAX_SER3_DTR_RI_DSR_CD_ON_NONE + bool "No_DTR_RI_DSR_CD" + +config ETRAX_SER3_DTR_RI_DSR_CD_ON_PA + bool "DTR_RI_DSR_CD_on_PA" + +config ETRAX_SER3_DTR_RI_DSR_CD_ON_PB + bool "DTR_RI_DSR_CD_on_PB" + +config ETRAX_SER3_DTR_RI_DSR_CD_MIXED + bool "DTR_RI_DSR_CD_mixed_on_PA_and_PB" + +endchoice + +config ETRAX_SER3_DTR_ON_PA_BIT + int "Ser3 DTR on PA bit (-1 = not used)" if ETRAX_SER3_DTR_RI_DSR_CD_ON_PA || ETRAX_SER3_DTR_RI_DSR_CD_MIXED + depends on ETRAX_SERIAL_PORT3 + default "-1" + +config ETRAX_SER3_RI_ON_PA_BIT + int "Ser3 RI on PA bit (-1 = not used)" if ETRAX_SER3_DTR_RI_DSR_CD_ON_PA || ETRAX_SER3_DTR_RI_DSR_CD_MIXED + depends on ETRAX_SERIAL_PORT3 + default "-1" + +config ETRAX_SER3_DSR_ON_PA_BIT + int "Ser3 DSR on PA bit (-1 = not used)" if ETRAX_SER3_DTR_RI_DSR_CD_ON_PA || ETRAX_SER3_DTR_RI_DSR_CD_MIXED + depends on ETRAX_SERIAL_PORT3 + default "-1" + +config ETRAX_SER3_CD_ON_PA_BIT + int "Ser3 CD on PA bit (-1 = not used)" if ETRAX_SER3_DTR_RI_DSR_CD_ON_PA || ETRAX_SER3_DTR_RI_DSR_CD_MIXED + depends on ETRAX_SERIAL_PORT3 + default "-1" + +config ETRAX_SER3_DTR_ON_PB_BIT + int "Ser3 DTR on PB bit (-1 = not used)" if ETRAX_SER3_DTR_RI_DSR_CD_ON_PB || ETRAX_SER3_DTR_RI_DSR_CD_MIXED + depends on ETRAX_SERIAL_PORT3 + default "-1" + +config ETRAX_SER3_RI_ON_PB_BIT + int "Ser3 RI on PB bit (-1 = not used)" if ETRAX_SER3_DTR_RI_DSR_CD_ON_PB || ETRAX_SER3_DTR_RI_DSR_CD_MIXED + depends on ETRAX_SERIAL_PORT3 + default "-1" + +config ETRAX_SER3_DSR_ON_PB_BIT + int "Ser3 DSR on PB bit (-1 = not used)" if ETRAX_SER3_DTR_RI_DSR_CD_ON_PB || ETRAX_SER3_DTR_RI_DSR_CD_MIXED + depends on ETRAX_SERIAL_PORT3 + default "-1" + +config ETRAX_SER3_CD_ON_PB_BIT + int "Ser3 CD on PB bit (-1 = not used)" if ETRAX_SER3_DTR_RI_DSR_CD_ON_PB || ETRAX_SER3_DTR_RI_DSR_CD_MIXED + depends on ETRAX_SERIAL_PORT3 + default "-1" + +config ETRAX_RS485 + bool "RS-485 support" + depends on ETRAX_SERIAL + help + Enables support for RS-485 serial communication. For a primer on + RS-485, see <http://en.wikipedia.org/wiki/Rs485> + +config ETRAX_RS485_ON_PA + bool "RS-485 mode on PA" + depends on ETRAX_RS485 + help + Control Driver Output Enable on RS485 transceiver using a pin on PA + port: + Axis 2400/2401 uses PA 3. + +config ETRAX_RS485_ON_PA_BIT + int "RS-485 mode on PA bit" + depends on ETRAX_RS485_ON_PA + default "3" + help + Control Driver Output Enable on RS485 transceiver using a this bit + on PA port. + +config ETRAX_RS485_DISABLE_RECEIVER + bool "Disable serial receiver" + depends on ETRAX_RS485 + help + It's necessary to disable the serial receiver to avoid serial + loopback. Not all products are able to do this in software only. + Axis 2400/2401 must disable receiver. + +config ETRAX_USB_HOST + bool "USB host" + select USB + help + This option enables the host functionality of the ETRAX 100LX + built-in USB controller. In host mode the controller is designed + for CTRL and BULK traffic only, INTR traffic may work as well + however (depending on the requirements of timeliness). + +config ETRAX_PTABLE_SECTOR + int "Byte-offset of partition table sector" + depends on ETRAX_AXISFLASHMAP + default "65536" + help + Byte-offset of the partition table in the first flash chip. + The default value is 64kB and should not be changed unless + you know exactly what you are doing. The only valid reason + for changing this is when the flash block size is bigger + than 64kB (e.g. when using two parallel 16 bit flashes). + +config ETRAX_I2C + bool "I2C support" + depends on ETRAX_ARCH_V10 + help + Enables an I2C driver on ETRAX100. + EXAMPLE usage: + i2c_arg = I2C_WRITEARG(STA013_WRITE_ADDR, reg, val); + ioctl(fd, _IO(ETRAXI2C_IOCTYPE, I2C_WRITEREG), i2c_arg); + i2c_arg = I2C_READARG(STA013_READ_ADDR, reg); + val = ioctl(fd, _IO(ETRAXI2C_IOCTYPE, I2C_READREG), i2c_arg); + +# this is true for most products since PB-I2C seems to be somewhat +# flawed.. +config ETRAX_I2C_USES_PB_NOT_PB_I2C + bool "I2C uses PB not PB-I2C" + depends on ETRAX_I2C + help + Select whether to use the special I2C mode in the PB I/O register or + not. This option needs to be selected in order to use some drivers + that access the I2C I/O pins directly instead of going through the + I2C driver, like the DS1302 realtime-clock driver. If you are + uncertain, choose Y here. + +config ETRAX_I2C_DATA_PORT + int "I2C SDA bit number" + depends on ETRAX_I2C_USES_PB_NOT_PB_I2C + default "0" + help + Selects the pin on Port B where the data pin is connected + +config ETRAX_I2C_CLK_PORT + int "I2C SCL bit number" + depends on ETRAX_I2C_USES_PB_NOT_PB_I2C + default "1" + help + Select the pin on Port B where the clock pin is connected + +config ETRAX_I2C_EEPROM + bool "I2C EEPROM (non-volatile RAM) support" + depends on ETRAX_I2C + help + Enables I2C EEPROM (non-volatile RAM) on PB0 and PB1 using the I2C + driver. Select size option: Probed, 2k, 8k, 16k. + (Probing works for 2k and 8k but not that well for 16k) + +choice + prompt "EEPROM size" + depends on ETRAX_I2C_EEPROM + default ETRAX_I2C_EEPROM_PROBE + +config ETRAX_I2C_EEPROM_PROBE + bool "Probed" + help + Specifies size or auto probe of the EEPROM size. + Options: Probed, 2k, 8k, 16k. + (Probing works for 2k and 8k but not that well for 16k) + +config ETRAX_I2C_EEPROM_2KB + bool "2kB" + help + Use a 2kB EEPROM. + +config ETRAX_I2C_EEPROM_8KB + bool "8kB" + help + Use a 8kB EEPROM. + +config ETRAX_I2C_EEPROM_16KB + bool "16kB" + help + Use a 16kB EEPROM. + +endchoice + +config ETRAX_GPIO + bool "GPIO support" + depends on ETRAX_ARCH_V10 + ---help--- + Enables the ETRAX general port device (major 120, minors 0 and 1). + You can use this driver to access the general port bits. It supports + these ioctl's: + #include <linux/etraxgpio.h> + fd = open("/dev/gpioa", O_RDWR); // or /dev/gpiob + ioctl(fd, _IO(ETRAXGPIO_IOCTYPE, IO_SETBITS), bits_to_set); + ioctl(fd, _IO(ETRAXGPIO_IOCTYPE, IO_CLRBITS), bits_to_clear); + val = ioctl(fd, _IO(ETRAXGPIO_IOCTYPE, IO_READBITS), NULL); + Remember that you need to setup the port directions appropriately in + the General configuration. + +config ETRAX_PA_CHANGEABLE_DIR + hex "PA user changeable dir mask" + depends on ETRAX_GPIO + default "00" + help + This is a bitmask with information of what bits in PA that a user + can change direction on using ioctl's. + Bit set = changeable. + You probably want 00 here. + +config ETRAX_PA_CHANGEABLE_BITS + hex "PA user changeable bits mask" + depends on ETRAX_GPIO + default "FF" + help + This is a bitmask with information of what bits in PA that a user + can change the value on using ioctl's. + Bit set = changeable. + You probably want 00 here. + +config ETRAX_PB_CHANGEABLE_DIR + hex "PB user changeable dir mask" + depends on ETRAX_GPIO + default "00" + help + This is a bitmask with information of what bits in PB that a user + can change direction on using ioctl's. + Bit set = changeable. + You probably want 00 here. + +config ETRAX_PB_CHANGEABLE_BITS + hex "PB user changeable bits mask" + depends on ETRAX_GPIO + default "FF" + help + This is a bitmask with information of what bits in PB that a user + can change the value on using ioctl's. + Bit set = changeable. + You probably want 00 here. + +endif diff --git a/kernel/arch/cris/arch-v10/drivers/Makefile b/kernel/arch/cris/arch-v10/drivers/Makefile new file mode 100644 index 000000000..e5c13183b --- /dev/null +++ b/kernel/arch/cris/arch-v10/drivers/Makefile @@ -0,0 +1,10 @@ +# +# Makefile for Etrax-specific drivers +# + +obj-$(CONFIG_ETRAX_AXISFLASHMAP) += axisflashmap.o +obj-$(CONFIG_ETRAX_I2C) += i2c.o +obj-$(CONFIG_ETRAX_I2C_EEPROM) += eeprom.o +obj-$(CONFIG_ETRAX_GPIO) += gpio.o +obj-$(CONFIG_ETRAX_SYNCHRONOUS_SERIAL) += sync_serial.o + diff --git a/kernel/arch/cris/arch-v10/drivers/axisflashmap.c b/kernel/arch/cris/arch-v10/drivers/axisflashmap.c new file mode 100644 index 000000000..a4bbdfd37 --- /dev/null +++ b/kernel/arch/cris/arch-v10/drivers/axisflashmap.c @@ -0,0 +1,432 @@ +/* + * Physical mapping layer for MTD using the Axis partitiontable format + * + * Copyright (c) 2001, 2002 Axis Communications AB + * + * This file is under the GPL. + * + * First partition is always sector 0 regardless of if we find a partitiontable + * or not. In the start of the next sector, there can be a partitiontable that + * tells us what other partitions to define. If there isn't, we use a default + * partition split defined below. + * + */ + +#include <linux/module.h> +#include <linux/types.h> +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/slab.h> + +#include <linux/mtd/concat.h> +#include <linux/mtd/map.h> +#include <linux/mtd/mtd.h> +#include <linux/mtd/mtdram.h> +#include <linux/mtd/partitions.h> + +#include <asm/axisflashmap.h> +#include <asm/mmu.h> +#include <arch/sv_addr_ag.h> + +#ifdef CONFIG_CRIS_LOW_MAP +#define FLASH_UNCACHED_ADDR KSEG_8 +#define FLASH_CACHED_ADDR KSEG_5 +#else +#define FLASH_UNCACHED_ADDR KSEG_E +#define FLASH_CACHED_ADDR KSEG_F +#endif + +#if CONFIG_ETRAX_FLASH_BUSWIDTH==1 +#define flash_data __u8 +#elif CONFIG_ETRAX_FLASH_BUSWIDTH==2 +#define flash_data __u16 +#elif CONFIG_ETRAX_FLASH_BUSWIDTH==4 +#define flash_data __u32 +#endif + +/* From head.S */ +extern unsigned long romfs_start, romfs_length, romfs_in_flash; + +/* The master mtd for the entire flash. */ +struct mtd_info* axisflash_mtd = NULL; + +/* Map driver functions. */ + +static map_word flash_read(struct map_info *map, unsigned long ofs) +{ + map_word tmp; + tmp.x[0] = *(flash_data *)(map->map_priv_1 + ofs); + return tmp; +} + +static void flash_copy_from(struct map_info *map, void *to, + unsigned long from, ssize_t len) +{ + memcpy(to, (void *)(map->map_priv_1 + from), len); +} + +static void flash_write(struct map_info *map, map_word d, unsigned long adr) +{ + *(flash_data *)(map->map_priv_1 + adr) = (flash_data)d.x[0]; +} + +/* + * The map for chip select e0. + * + * We run into tricky coherence situations if we mix cached with uncached + * accesses to we only use the uncached version here. + * + * The size field is the total size where the flash chips may be mapped on the + * chip select. MTD probes should find all devices there and it does not matter + * if there are unmapped gaps or aliases (mirrors of flash devices). The MTD + * probes will ignore them. + * + * The start address in map_priv_1 is in virtual memory so we cannot use + * MEM_CSE0_START but must rely on that FLASH_UNCACHED_ADDR is the start + * address of cse0. + */ +static struct map_info map_cse0 = { + .name = "cse0", + .size = MEM_CSE0_SIZE, + .bankwidth = CONFIG_ETRAX_FLASH_BUSWIDTH, + .read = flash_read, + .copy_from = flash_copy_from, + .write = flash_write, + .map_priv_1 = FLASH_UNCACHED_ADDR +}; + +/* + * The map for chip select e1. + * + * If there was a gap between cse0 and cse1, map_priv_1 would get the wrong + * address, but there isn't. + */ +static struct map_info map_cse1 = { + .name = "cse1", + .size = MEM_CSE1_SIZE, + .bankwidth = CONFIG_ETRAX_FLASH_BUSWIDTH, + .read = flash_read, + .copy_from = flash_copy_from, + .write = flash_write, + .map_priv_1 = FLASH_UNCACHED_ADDR + MEM_CSE0_SIZE +}; + +/* If no partition-table was found, we use this default-set. */ +#define MAX_PARTITIONS 7 +#define NUM_DEFAULT_PARTITIONS 3 + +/* + * Default flash size is 2MB. CONFIG_ETRAX_PTABLE_SECTOR is most likely the + * size of one flash block and "filesystem"-partition needs 5 blocks to be able + * to use JFFS. + */ +static struct mtd_partition axis_default_partitions[NUM_DEFAULT_PARTITIONS] = { + { + .name = "boot firmware", + .size = CONFIG_ETRAX_PTABLE_SECTOR, + .offset = 0 + }, + { + .name = "kernel", + .size = 0x200000 - (6 * CONFIG_ETRAX_PTABLE_SECTOR), + .offset = CONFIG_ETRAX_PTABLE_SECTOR + }, + { + .name = "filesystem", + .size = 5 * CONFIG_ETRAX_PTABLE_SECTOR, + .offset = 0x200000 - (5 * CONFIG_ETRAX_PTABLE_SECTOR) + } +}; + +/* Initialize the ones normally used. */ +static struct mtd_partition axis_partitions[MAX_PARTITIONS] = { + { + .name = "part0", + .size = CONFIG_ETRAX_PTABLE_SECTOR, + .offset = 0 + }, + { + .name = "part1", + .size = 0, + .offset = 0 + }, + { + .name = "part2", + .size = 0, + .offset = 0 + }, + { + .name = "part3", + .size = 0, + .offset = 0 + }, + { + .name = "part4", + .size = 0, + .offset = 0 + }, + { + .name = "part5", + .size = 0, + .offset = 0 + }, + { + .name = "part6", + .size = 0, + .offset = 0 + }, +}; + +#ifdef CONFIG_ETRAX_AXISFLASHMAP_MTD0WHOLE +/* Main flash device */ +static struct mtd_partition main_partition = { + .name = "main", + .size = 0, + .offset = 0 +}; +#endif + +/* + * Probe a chip select for AMD-compatible (JEDEC) or CFI-compatible flash + * chips in that order (because the amd_flash-driver is faster). + */ +static struct mtd_info *probe_cs(struct map_info *map_cs) +{ + struct mtd_info *mtd_cs = NULL; + + printk(KERN_INFO + "%s: Probing a 0x%08lx bytes large window at 0x%08lx.\n", + map_cs->name, map_cs->size, map_cs->map_priv_1); + +#ifdef CONFIG_MTD_CFI + mtd_cs = do_map_probe("cfi_probe", map_cs); +#endif +#ifdef CONFIG_MTD_JEDECPROBE + if (!mtd_cs) + mtd_cs = do_map_probe("jedec_probe", map_cs); +#endif + + return mtd_cs; +} + +/* + * Probe each chip select individually for flash chips. If there are chips on + * both cse0 and cse1, the mtd_info structs will be concatenated to one struct + * so that MTD partitions can cross chip boundries. + * + * The only known restriction to how you can mount your chips is that each + * chip select must hold similar flash chips. But you need external hardware + * to do that anyway and you can put totally different chips on cse0 and cse1 + * so it isn't really much of a restriction. + */ +static struct mtd_info *flash_probe(void) +{ + struct mtd_info *mtd_cse0; + struct mtd_info *mtd_cse1; + struct mtd_info *mtd_cse; + + mtd_cse0 = probe_cs(&map_cse0); + mtd_cse1 = probe_cs(&map_cse1); + + if (!mtd_cse0 && !mtd_cse1) { + /* No chip found. */ + return NULL; + } + + if (mtd_cse0 && mtd_cse1) { + struct mtd_info *mtds[] = { mtd_cse0, mtd_cse1 }; + + /* Since the concatenation layer adds a small overhead we + * could try to figure out if the chips in cse0 and cse1 are + * identical and reprobe the whole cse0+cse1 window. But since + * flash chips are slow, the overhead is relatively small. + * So we use the MTD concatenation layer instead of further + * complicating the probing procedure. + */ + mtd_cse = mtd_concat_create(mtds, ARRAY_SIZE(mtds), + "cse0+cse1"); + if (!mtd_cse) { + printk(KERN_ERR "%s and %s: Concatenation failed!\n", + map_cse0.name, map_cse1.name); + + /* The best we can do now is to only use what we found + * at cse0. + */ + mtd_cse = mtd_cse0; + map_destroy(mtd_cse1); + } + } else { + mtd_cse = mtd_cse0? mtd_cse0 : mtd_cse1; + } + + return mtd_cse; +} + +/* + * Probe the flash chip(s) and, if it succeeds, read the partition-table + * and register the partitions with MTD. + */ +static int __init init_axis_flash(void) +{ + struct mtd_info *mymtd; + int err = 0; + int pidx = 0; + struct partitiontable_head *ptable_head = NULL; + struct partitiontable_entry *ptable; + int use_default_ptable = 1; /* Until proven otherwise. */ + const char pmsg[] = " /dev/flash%d at 0x%08x, size 0x%08x\n"; + + if (!(mymtd = flash_probe())) { + /* There's no reason to use this module if no flash chip can + * be identified. Make sure that's understood. + */ + printk(KERN_INFO "axisflashmap: Found no flash chip.\n"); + } else { + printk(KERN_INFO "%s: 0x%08x bytes of flash memory.\n", + mymtd->name, mymtd->size); + axisflash_mtd = mymtd; + } + + if (mymtd) { + mymtd->owner = THIS_MODULE; + ptable_head = (struct partitiontable_head *)(FLASH_CACHED_ADDR + + CONFIG_ETRAX_PTABLE_SECTOR + + PARTITION_TABLE_OFFSET); + } + pidx++; /* First partition is always set to the default. */ + + if (ptable_head && (ptable_head->magic == PARTITION_TABLE_MAGIC) + && (ptable_head->size < + (MAX_PARTITIONS * sizeof(struct partitiontable_entry) + + PARTITIONTABLE_END_MARKER_SIZE)) + && (*(unsigned long*)((void*)ptable_head + sizeof(*ptable_head) + + ptable_head->size - + PARTITIONTABLE_END_MARKER_SIZE) + == PARTITIONTABLE_END_MARKER)) { + /* Looks like a start, sane length and end of a + * partition table, lets check csum etc. + */ + int ptable_ok = 0; + struct partitiontable_entry *max_addr = + (struct partitiontable_entry *) + ((unsigned long)ptable_head + sizeof(*ptable_head) + + ptable_head->size); + unsigned long offset = CONFIG_ETRAX_PTABLE_SECTOR; + unsigned char *p; + unsigned long csum = 0; + + ptable = (struct partitiontable_entry *) + ((unsigned long)ptable_head + sizeof(*ptable_head)); + + /* Lets be PARANOID, and check the checksum. */ + p = (unsigned char*) ptable; + + while (p <= (unsigned char*)max_addr) { + csum += *p++; + csum += *p++; + csum += *p++; + csum += *p++; + } + ptable_ok = (csum == ptable_head->checksum); + + /* Read the entries and use/show the info. */ + printk(KERN_INFO " Found a%s partition table at 0x%p-0x%p.\n", + (ptable_ok ? " valid" : "n invalid"), ptable_head, + max_addr); + + /* We have found a working bootblock. Now read the + * partition table. Scan the table. It ends when + * there is 0xffffffff, that is, empty flash. + */ + while (ptable_ok + && ptable->offset != 0xffffffff + && ptable < max_addr + && pidx < MAX_PARTITIONS) { + + axis_partitions[pidx].offset = offset + ptable->offset; + axis_partitions[pidx].size = ptable->size; + + printk(pmsg, pidx, axis_partitions[pidx].offset, + axis_partitions[pidx].size); + pidx++; + ptable++; + } + use_default_ptable = !ptable_ok; + } + + if (romfs_in_flash) { + /* Add an overlapping device for the root partition (romfs). */ + + axis_partitions[pidx].name = "romfs"; + axis_partitions[pidx].size = romfs_length; + axis_partitions[pidx].offset = romfs_start - FLASH_CACHED_ADDR; + axis_partitions[pidx].mask_flags |= MTD_WRITEABLE; + + printk(KERN_INFO + " Adding readonly flash partition for romfs image:\n"); + printk(pmsg, pidx, axis_partitions[pidx].offset, + axis_partitions[pidx].size); + pidx++; + } + +#ifdef CONFIG_ETRAX_AXISFLASHMAP_MTD0WHOLE + if (mymtd) { + main_partition.size = mymtd->size; + err = mtd_device_register(mymtd, &main_partition, 1); + if (err) + panic("axisflashmap: Could not initialize " + "partition for whole main mtd device!\n"); + } +#endif + + if (mymtd) { + if (use_default_ptable) { + printk(KERN_INFO " Using default partition table.\n"); + err = mtd_device_register(mymtd, + axis_default_partitions, + NUM_DEFAULT_PARTITIONS); + } else { + err = mtd_device_register(mymtd, axis_partitions, + pidx); + } + + if (err) + panic("axisflashmap could not add MTD partitions!\n"); + } + + if (!romfs_in_flash) { + /* Create an RAM device for the root partition (romfs). */ + +#if !defined(CONFIG_MTD_MTDRAM) || (CONFIG_MTDRAM_TOTAL_SIZE != 0) || (CONFIG_MTDRAM_ABS_POS != 0) + /* No use trying to boot this kernel from RAM. Panic! */ + printk(KERN_EMERG "axisflashmap: Cannot create an MTD RAM " + "device due to kernel (mis)configuration!\n"); + panic("This kernel cannot boot from RAM!\n"); +#else + struct mtd_info *mtd_ram; + + mtd_ram = kmalloc(sizeof(struct mtd_info), GFP_KERNEL); + if (!mtd_ram) + panic("axisflashmap couldn't allocate memory for " + "mtd_info!\n"); + + printk(KERN_INFO " Adding RAM partition for romfs image:\n"); + printk(pmsg, pidx, (unsigned)romfs_start, + (unsigned)romfs_length); + + err = mtdram_init_device(mtd_ram, + (void *)romfs_start, + romfs_length, + "romfs"); + if (err) + panic("axisflashmap could not initialize MTD RAM " + "device!\n"); +#endif + } + return err; +} + +/* This adds the above to the kernels init-call chain. */ +module_init(init_axis_flash); + +EXPORT_SYMBOL(axisflash_mtd); diff --git a/kernel/arch/cris/arch-v10/drivers/eeprom.c b/kernel/arch/cris/arch-v10/drivers/eeprom.c new file mode 100644 index 000000000..5047a3304 --- /dev/null +++ b/kernel/arch/cris/arch-v10/drivers/eeprom.c @@ -0,0 +1,852 @@ +/*!***************************************************************************** +*! +*! Implements an interface for i2c compatible eeproms to run under Linux. +*! Supports 2k, 8k(?) and 16k. Uses adaptive timing adjustments by +*! Johan.Adolfsson@axis.com +*! +*! Probing results: +*! 8k or not is detected (the assumes 2k or 16k) +*! 2k or 16k detected using test reads and writes. +*! +*!------------------------------------------------------------------------ +*! HISTORY +*! +*! DATE NAME CHANGES +*! ---- ---- ------- +*! Aug 28 1999 Edgar Iglesias Initial Version +*! Aug 31 1999 Edgar Iglesias Allow simultaneous users. +*! Sep 03 1999 Edgar Iglesias Updated probe. +*! Sep 03 1999 Edgar Iglesias Added bail-out stuff if we get interrupted +*! in the spin-lock. +*! +*! (c) 1999 Axis Communications AB, Lund, Sweden +*!*****************************************************************************/ + +#include <linux/kernel.h> +#include <linux/sched.h> +#include <linux/fs.h> +#include <linux/init.h> +#include <linux/delay.h> +#include <linux/interrupt.h> +#include <linux/wait.h> +#include <asm/uaccess.h> +#include "i2c.h" + +#define D(x) + +/* If we should use adaptive timing or not: */ +/* #define EEPROM_ADAPTIVE_TIMING */ + +#define EEPROM_MAJOR_NR 122 /* use a LOCAL/EXPERIMENTAL major for now */ +#define EEPROM_MINOR_NR 0 + +/* Empirical sane initial value of the delay, the value will be adapted to + * what the chip needs when using EEPROM_ADAPTIVE_TIMING. + */ +#define INITIAL_WRITEDELAY_US 4000 +#define MAX_WRITEDELAY_US 10000 /* 10 ms according to spec for 2KB EEPROM */ + +/* This one defines how many times to try when eeprom fails. */ +#define EEPROM_RETRIES 10 + +#define EEPROM_2KB (2 * 1024) +/*#define EEPROM_4KB (4 * 1024)*/ /* Exists but not used in Axis products */ +#define EEPROM_8KB (8 * 1024 - 1 ) /* Last byte has write protection bit */ +#define EEPROM_16KB (16 * 1024) + +#define i2c_delay(x) udelay(x) + +/* + * This structure describes the attached eeprom chip. + * The values are probed for. + */ + +struct eeprom_type +{ + unsigned long size; + unsigned long sequential_write_pagesize; + unsigned char select_cmd; + unsigned long usec_delay_writecycles; /* Min time between write cycles + (up to 10ms for some models) */ + unsigned long usec_delay_step; /* For adaptive algorithm */ + int adapt_state; /* 1 = To high , 0 = Even, -1 = To low */ + + /* this one is to keep the read/write operations atomic */ + struct mutex lock; + int retry_cnt_addr; /* Used to keep track of number of retries for + adaptive timing adjustments */ + int retry_cnt_read; +}; + +static int eeprom_open(struct inode * inode, struct file * file); +static loff_t eeprom_lseek(struct file * file, loff_t offset, int orig); +static ssize_t eeprom_read(struct file * file, char * buf, size_t count, + loff_t *off); +static ssize_t eeprom_write(struct file * file, const char * buf, size_t count, + loff_t *off); +static int eeprom_close(struct inode * inode, struct file * file); + +static int eeprom_address(unsigned long addr); +static int read_from_eeprom(char * buf, int count); +static int eeprom_write_buf(loff_t addr, const char * buf, int count); +static int eeprom_read_buf(loff_t addr, char * buf, int count); + +static void eeprom_disable_write_protect(void); + + +static const char eeprom_name[] = "eeprom"; + +/* chip description */ +static struct eeprom_type eeprom; + +/* This is the exported file-operations structure for this device. */ +const struct file_operations eeprom_fops = +{ + .llseek = eeprom_lseek, + .read = eeprom_read, + .write = eeprom_write, + .open = eeprom_open, + .release = eeprom_close +}; + +/* eeprom init call. Probes for different eeprom models. */ + +int __init eeprom_init(void) +{ + mutex_init(&eeprom.lock); + +#ifdef CONFIG_ETRAX_I2C_EEPROM_PROBE +#define EETEXT "Found" +#else +#define EETEXT "Assuming" +#endif + if (register_chrdev(EEPROM_MAJOR_NR, eeprom_name, &eeprom_fops)) + { + printk(KERN_INFO "%s: unable to get major %d for eeprom device\n", + eeprom_name, EEPROM_MAJOR_NR); + return -1; + } + + printk("EEPROM char device v0.3, (c) 2000 Axis Communications AB\n"); + + /* + * Note: Most of this probing method was taken from the printserver (5470e) + * codebase. It did not contain a way of finding the 16kB chips + * (M24128 or variants). The method used here might not work + * for all models. If you encounter problems the easiest way + * is probably to define your model within #ifdef's, and hard- + * code it. + */ + + eeprom.size = 0; + eeprom.usec_delay_writecycles = INITIAL_WRITEDELAY_US; + eeprom.usec_delay_step = 128; + eeprom.adapt_state = 0; + +#ifdef CONFIG_ETRAX_I2C_EEPROM_PROBE + i2c_start(); + i2c_outbyte(0x80); + if(!i2c_getack()) + { + /* It's not 8k.. */ + int success = 0; + unsigned char buf_2k_start[16]; + + /* Im not sure this will work... :) */ + /* assume 2kB, if failure go for 16kB */ + /* Test with 16kB settings.. */ + /* If it's a 2kB EEPROM and we address it outside it's range + * it will mirror the address space: + * 1. We read two locations (that are mirrored), + * if the content differs * it's a 16kB EEPROM. + * 2. if it doesn't differ - write different value to one of the locations, + * check the other - if content still is the same it's a 2k EEPROM, + * restore original data. + */ +#define LOC1 8 +#define LOC2 (0x1fb) /*1fb, 3ed, 5df, 7d1 */ + + /* 2k settings */ + i2c_stop(); + eeprom.size = EEPROM_2KB; + eeprom.select_cmd = 0xA0; + eeprom.sequential_write_pagesize = 16; + if( eeprom_read_buf( 0, buf_2k_start, 16 ) == 16 ) + { + D(printk("2k start: '%16.16s'\n", buf_2k_start)); + } + else + { + printk(KERN_INFO "%s: Failed to read in 2k mode!\n", eeprom_name); + } + + /* 16k settings */ + eeprom.size = EEPROM_16KB; + eeprom.select_cmd = 0xA0; + eeprom.sequential_write_pagesize = 64; + + { + unsigned char loc1[4], loc2[4], tmp[4]; + if( eeprom_read_buf(LOC2, loc2, 4) == 4) + { + if( eeprom_read_buf(LOC1, loc1, 4) == 4) + { + D(printk("0 loc1: (%i) '%4.4s' loc2 (%i) '%4.4s'\n", + LOC1, loc1, LOC2, loc2)); +#if 0 + if (memcmp(loc1, loc2, 4) != 0 ) + { + /* It's 16k */ + printk(KERN_INFO "%s: 16k detected in step 1\n", eeprom_name); + eeprom.size = EEPROM_16KB; + success = 1; + } + else +#endif + { + /* Do step 2 check */ + /* Invert value */ + loc1[0] = ~loc1[0]; + if (eeprom_write_buf(LOC1, loc1, 1) == 1) + { + /* If 2k EEPROM this write will actually write 10 bytes + * from pos 0 + */ + D(printk("1 loc1: (%i) '%4.4s' loc2 (%i) '%4.4s'\n", + LOC1, loc1, LOC2, loc2)); + if( eeprom_read_buf(LOC1, tmp, 4) == 4) + { + D(printk("2 loc1: (%i) '%4.4s' tmp '%4.4s'\n", + LOC1, loc1, tmp)); + if (memcmp(loc1, tmp, 4) != 0 ) + { + printk(KERN_INFO "%s: read and write differs! Not 16kB\n", + eeprom_name); + loc1[0] = ~loc1[0]; + + if (eeprom_write_buf(LOC1, loc1, 1) == 1) + { + success = 1; + } + else + { + printk(KERN_INFO "%s: Restore 2k failed during probe," + " EEPROM might be corrupt!\n", eeprom_name); + + } + i2c_stop(); + /* Go to 2k mode and write original data */ + eeprom.size = EEPROM_2KB; + eeprom.select_cmd = 0xA0; + eeprom.sequential_write_pagesize = 16; + if( eeprom_write_buf(0, buf_2k_start, 16) == 16) + { + } + else + { + printk(KERN_INFO "%s: Failed to write back 2k start!\n", + eeprom_name); + } + + eeprom.size = EEPROM_2KB; + } + } + + if(!success) + { + if( eeprom_read_buf(LOC2, loc2, 1) == 1) + { + D(printk("0 loc1: (%i) '%4.4s' loc2 (%i) '%4.4s'\n", + LOC1, loc1, LOC2, loc2)); + if (memcmp(loc1, loc2, 4) == 0 ) + { + /* Data the same, must be mirrored -> 2k */ + /* Restore data */ + printk(KERN_INFO "%s: 2k detected in step 2\n", eeprom_name); + loc1[0] = ~loc1[0]; + if (eeprom_write_buf(LOC1, loc1, 1) == 1) + { + success = 1; + } + else + { + printk(KERN_INFO "%s: Restore 2k failed during probe," + " EEPROM might be corrupt!\n", eeprom_name); + + } + + eeprom.size = EEPROM_2KB; + } + else + { + printk(KERN_INFO "%s: 16k detected in step 2\n", + eeprom_name); + loc1[0] = ~loc1[0]; + /* Data differs, assume 16k */ + /* Restore data */ + if (eeprom_write_buf(LOC1, loc1, 1) == 1) + { + success = 1; + } + else + { + printk(KERN_INFO "%s: Restore 16k failed during probe," + " EEPROM might be corrupt!\n", eeprom_name); + } + + eeprom.size = EEPROM_16KB; + } + } + } + } + } /* read LOC1 */ + } /* address LOC1 */ + if (!success) + { + printk(KERN_INFO "%s: Probing failed!, using 2KB!\n", eeprom_name); + eeprom.size = EEPROM_2KB; + } + } /* read */ + } + } + else + { + i2c_outbyte(0x00); + if(!i2c_getack()) + { + /* No 8k */ + eeprom.size = EEPROM_2KB; + } + else + { + i2c_start(); + i2c_outbyte(0x81); + if (!i2c_getack()) + { + eeprom.size = EEPROM_2KB; + } + else + { + /* It's a 8kB */ + i2c_inbyte(); + eeprom.size = EEPROM_8KB; + } + } + } + i2c_stop(); +#elif defined(CONFIG_ETRAX_I2C_EEPROM_16KB) + eeprom.size = EEPROM_16KB; +#elif defined(CONFIG_ETRAX_I2C_EEPROM_8KB) + eeprom.size = EEPROM_8KB; +#elif defined(CONFIG_ETRAX_I2C_EEPROM_2KB) + eeprom.size = EEPROM_2KB; +#endif + + switch(eeprom.size) + { + case (EEPROM_2KB): + printk("%s: " EETEXT " i2c compatible 2kB eeprom.\n", eeprom_name); + eeprom.sequential_write_pagesize = 16; + eeprom.select_cmd = 0xA0; + break; + case (EEPROM_8KB): + printk("%s: " EETEXT " i2c compatible 8kB eeprom.\n", eeprom_name); + eeprom.sequential_write_pagesize = 16; + eeprom.select_cmd = 0x80; + break; + case (EEPROM_16KB): + printk("%s: " EETEXT " i2c compatible 16kB eeprom.\n", eeprom_name); + eeprom.sequential_write_pagesize = 64; + eeprom.select_cmd = 0xA0; + break; + default: + eeprom.size = 0; + printk("%s: Did not find a supported eeprom\n", eeprom_name); + break; + } + + + + eeprom_disable_write_protect(); + + return 0; +} + +/* Opens the device. */ +static int eeprom_open(struct inode * inode, struct file * file) +{ + if(iminor(inode) != EEPROM_MINOR_NR) + return -ENXIO; + if(imajor(inode) != EEPROM_MAJOR_NR) + return -ENXIO; + + if( eeprom.size > 0 ) + { + /* OK */ + return 0; + } + + /* No EEprom found */ + return -EFAULT; +} + +/* Changes the current file position. */ + +static loff_t eeprom_lseek(struct file * file, loff_t offset, int orig) +{ +/* + * orig 0: position from begning of eeprom + * orig 1: relative from current position + * orig 2: position from last eeprom address + */ + + switch (orig) + { + case 0: + file->f_pos = offset; + break; + case 1: + file->f_pos += offset; + break; + case 2: + file->f_pos = eeprom.size - offset; + break; + default: + return -EINVAL; + } + + /* truncate position */ + if (file->f_pos < 0) + { + file->f_pos = 0; + return(-EOVERFLOW); + } + + if (file->f_pos >= eeprom.size) + { + file->f_pos = eeprom.size - 1; + return(-EOVERFLOW); + } + + return ( file->f_pos ); +} + +/* Reads data from eeprom. */ + +static int eeprom_read_buf(loff_t addr, char * buf, int count) +{ + return eeprom_read(NULL, buf, count, &addr); +} + + + +/* Reads data from eeprom. */ + +static ssize_t eeprom_read(struct file * file, char * buf, size_t count, loff_t *off) +{ + int read=0; + unsigned long p = *off; + + unsigned char page; + + if(p >= eeprom.size) /* Address i 0 - (size-1) */ + { + return -EFAULT; + } + + if (mutex_lock_interruptible(&eeprom.lock)) + return -EINTR; + + page = (unsigned char) (p >> 8); + + if(!eeprom_address(p)) + { + printk(KERN_INFO "%s: Read failed to address the eeprom: " + "0x%08X (%i) page: %i\n", eeprom_name, (int)p, (int)p, page); + i2c_stop(); + + /* don't forget to wake them up */ + mutex_unlock(&eeprom.lock); + return -EFAULT; + } + + if( (p + count) > eeprom.size) + { + /* truncate count */ + count = eeprom.size - p; + } + + /* stop dummy write op and initiate the read op */ + i2c_start(); + + /* special case for small eeproms */ + if(eeprom.size < EEPROM_16KB) + { + i2c_outbyte( eeprom.select_cmd | 1 | (page << 1) ); + } + + /* go on with the actual read */ + read = read_from_eeprom( buf, count); + + if(read > 0) + { + *off += read; + } + + mutex_unlock(&eeprom.lock); + return read; +} + +/* Writes data to eeprom. */ + +static int eeprom_write_buf(loff_t addr, const char * buf, int count) +{ + return eeprom_write(NULL, buf, count, &addr); +} + + +/* Writes data to eeprom. */ + +static ssize_t eeprom_write(struct file * file, const char * buf, size_t count, + loff_t *off) +{ + int i, written, restart=1; + unsigned long p; + + if (!access_ok(VERIFY_READ, buf, count)) + { + return -EFAULT; + } + + /* bail out if we get interrupted */ + if (mutex_lock_interruptible(&eeprom.lock)) + return -EINTR; + for(i = 0; (i < EEPROM_RETRIES) && (restart > 0); i++) + { + restart = 0; + written = 0; + p = *off; + + + while( (written < count) && (p < eeprom.size)) + { + /* address the eeprom */ + if(!eeprom_address(p)) + { + printk(KERN_INFO "%s: Write failed to address the eeprom: " + "0x%08X (%i) \n", eeprom_name, (int)p, (int)p); + i2c_stop(); + + /* don't forget to wake them up */ + mutex_unlock(&eeprom.lock); + return -EFAULT; + } +#ifdef EEPROM_ADAPTIVE_TIMING + /* Adaptive algorithm to adjust timing */ + if (eeprom.retry_cnt_addr > 0) + { + /* To Low now */ + D(printk(">D=%i d=%i\n", + eeprom.usec_delay_writecycles, eeprom.usec_delay_step)); + + if (eeprom.usec_delay_step < 4) + { + eeprom.usec_delay_step++; + eeprom.usec_delay_writecycles += eeprom.usec_delay_step; + } + else + { + + if (eeprom.adapt_state > 0) + { + /* To Low before */ + eeprom.usec_delay_step *= 2; + if (eeprom.usec_delay_step > 2) + { + eeprom.usec_delay_step--; + } + eeprom.usec_delay_writecycles += eeprom.usec_delay_step; + } + else if (eeprom.adapt_state < 0) + { + /* To High before (toggle dir) */ + eeprom.usec_delay_writecycles += eeprom.usec_delay_step; + if (eeprom.usec_delay_step > 1) + { + eeprom.usec_delay_step /= 2; + eeprom.usec_delay_step--; + } + } + } + + eeprom.adapt_state = 1; + } + else + { + /* To High (or good) now */ + D(printk("<D=%i d=%i\n", + eeprom.usec_delay_writecycles, eeprom.usec_delay_step)); + + if (eeprom.adapt_state < 0) + { + /* To High before */ + if (eeprom.usec_delay_step > 1) + { + eeprom.usec_delay_step *= 2; + eeprom.usec_delay_step--; + + if (eeprom.usec_delay_writecycles > eeprom.usec_delay_step) + { + eeprom.usec_delay_writecycles -= eeprom.usec_delay_step; + } + } + } + else if (eeprom.adapt_state > 0) + { + /* To Low before (toggle dir) */ + if (eeprom.usec_delay_writecycles > eeprom.usec_delay_step) + { + eeprom.usec_delay_writecycles -= eeprom.usec_delay_step; + } + if (eeprom.usec_delay_step > 1) + { + eeprom.usec_delay_step /= 2; + eeprom.usec_delay_step--; + } + + eeprom.adapt_state = -1; + } + + if (eeprom.adapt_state > -100) + { + eeprom.adapt_state--; + } + else + { + /* Restart adaption */ + D(printk("#Restart\n")); + eeprom.usec_delay_step++; + } + } +#endif /* EEPROM_ADAPTIVE_TIMING */ + /* write until we hit a page boundary or count */ + do + { + i2c_outbyte(buf[written]); + if(!i2c_getack()) + { + restart=1; + printk(KERN_INFO "%s: write error, retrying. %d\n", eeprom_name, i); + i2c_stop(); + break; + } + written++; + p++; + } while( written < count && ( p % eeprom.sequential_write_pagesize )); + + /* end write cycle */ + i2c_stop(); + i2c_delay(eeprom.usec_delay_writecycles); + } /* while */ + } /* for */ + + mutex_unlock(&eeprom.lock); + if (written == 0 && p >= eeprom.size){ + return -ENOSPC; + } + *off = p; + return written; +} + +/* Closes the device. */ + +static int eeprom_close(struct inode * inode, struct file * file) +{ + /* do nothing for now */ + return 0; +} + +/* Sets the current address of the eeprom. */ + +static int eeprom_address(unsigned long addr) +{ + int i; + unsigned char page, offset; + + page = (unsigned char) (addr >> 8); + offset = (unsigned char) addr; + + for(i = 0; i < EEPROM_RETRIES; i++) + { + /* start a dummy write for addressing */ + i2c_start(); + + if(eeprom.size == EEPROM_16KB) + { + i2c_outbyte( eeprom.select_cmd ); + i2c_getack(); + i2c_outbyte(page); + } + else + { + i2c_outbyte( eeprom.select_cmd | (page << 1) ); + } + if(!i2c_getack()) + { + /* retry */ + i2c_stop(); + /* Must have a delay here.. 500 works, >50, 100->works 5th time*/ + i2c_delay(MAX_WRITEDELAY_US / EEPROM_RETRIES * i); + /* The chip needs up to 10 ms from write stop to next start */ + + } + else + { + i2c_outbyte(offset); + + if(!i2c_getack()) + { + /* retry */ + i2c_stop(); + } + else + break; + } + } + + + eeprom.retry_cnt_addr = i; + D(printk("%i\n", eeprom.retry_cnt_addr)); + if(eeprom.retry_cnt_addr == EEPROM_RETRIES) + { + /* failed */ + return 0; + } + return 1; +} + +/* Reads from current address. */ + +static int read_from_eeprom(char * buf, int count) +{ + int i, read=0; + + for(i = 0; i < EEPROM_RETRIES; i++) + { + if(eeprom.size == EEPROM_16KB) + { + i2c_outbyte( eeprom.select_cmd | 1 ); + } + + if(i2c_getack()) + { + break; + } + } + + if(i == EEPROM_RETRIES) + { + printk(KERN_INFO "%s: failed to read from eeprom\n", eeprom_name); + i2c_stop(); + + return -EFAULT; + } + + while( (read < count)) + { + if (put_user(i2c_inbyte(), &buf[read++])) + { + i2c_stop(); + + return -EFAULT; + } + + /* + * make sure we don't ack last byte or you will get very strange + * results! + */ + if(read < count) + { + i2c_sendack(); + } + } + + /* stop the operation */ + i2c_stop(); + + return read; +} + +/* Disables write protection if applicable. */ + +#define DBP_SAVE(x) +#define ax_printf printk +static void eeprom_disable_write_protect(void) +{ + /* Disable write protect */ + if (eeprom.size == EEPROM_8KB) + { + /* Step 1 Set WEL = 1 (write 00000010 to address 1FFFh */ + i2c_start(); + i2c_outbyte(0xbe); + if(!i2c_getack()) + { + DBP_SAVE(ax_printf("Get ack returns false\n")); + } + i2c_outbyte(0xFF); + if(!i2c_getack()) + { + DBP_SAVE(ax_printf("Get ack returns false 2\n")); + } + i2c_outbyte(0x02); + if(!i2c_getack()) + { + DBP_SAVE(ax_printf("Get ack returns false 3\n")); + } + i2c_stop(); + + i2c_delay(1000); + + /* Step 2 Set RWEL = 1 (write 00000110 to address 1FFFh */ + i2c_start(); + i2c_outbyte(0xbe); + if(!i2c_getack()) + { + DBP_SAVE(ax_printf("Get ack returns false 55\n")); + } + i2c_outbyte(0xFF); + if(!i2c_getack()) + { + DBP_SAVE(ax_printf("Get ack returns false 52\n")); + } + i2c_outbyte(0x06); + if(!i2c_getack()) + { + DBP_SAVE(ax_printf("Get ack returns false 53\n")); + } + i2c_stop(); + + /* Step 3 Set BP1, BP0, and/or WPEN bits (write 00000110 to address 1FFFh */ + i2c_start(); + i2c_outbyte(0xbe); + if(!i2c_getack()) + { + DBP_SAVE(ax_printf("Get ack returns false 56\n")); + } + i2c_outbyte(0xFF); + if(!i2c_getack()) + { + DBP_SAVE(ax_printf("Get ack returns false 57\n")); + } + i2c_outbyte(0x06); + if(!i2c_getack()) + { + DBP_SAVE(ax_printf("Get ack returns false 58\n")); + } + i2c_stop(); + + /* Write protect disabled */ + } +} + +module_init(eeprom_init); diff --git a/kernel/arch/cris/arch-v10/drivers/gpio.c b/kernel/arch/cris/arch-v10/drivers/gpio.c new file mode 100644 index 000000000..64285e0d3 --- /dev/null +++ b/kernel/arch/cris/arch-v10/drivers/gpio.c @@ -0,0 +1,856 @@ +/* + * Etrax general port I/O device + * + * Copyright (c) 1999-2007 Axis Communications AB + * + * Authors: Bjorn Wesen (initial version) + * Ola Knutsson (LED handling) + * Johan Adolfsson (read/set directions, write, port G) + */ + + +#include <linux/module.h> +#include <linux/sched.h> +#include <linux/slab.h> +#include <linux/ioport.h> +#include <linux/errno.h> +#include <linux/kernel.h> +#include <linux/fs.h> +#include <linux/string.h> +#include <linux/poll.h> +#include <linux/init.h> +#include <linux/interrupt.h> + +#include <asm/etraxgpio.h> +#include <arch/svinto.h> +#include <asm/io.h> +#include <asm/irq.h> +#include <arch/io_interface_mux.h> + +#define GPIO_MAJOR 120 /* experimental MAJOR number */ + +#define D(x) + +#if 0 +static int dp_cnt; +#define DP(x) do { dp_cnt++; if (dp_cnt % 1000 == 0) x; }while(0) +#else +#define DP(x) +#endif + +static char gpio_name[] = "etrax gpio"; + +#if 0 +static wait_queue_head_t *gpio_wq; +#endif + +static long gpio_ioctl(struct file *file, unsigned int cmd, unsigned long arg); +static ssize_t gpio_write(struct file *file, const char __user *buf, + size_t count, loff_t *off); +static int gpio_open(struct inode *inode, struct file *filp); +static int gpio_release(struct inode *inode, struct file *filp); +static unsigned int gpio_poll(struct file *filp, struct poll_table_struct *wait); + +/* private data per open() of this driver */ + +struct gpio_private { + struct gpio_private *next; + /* These fields are for PA and PB only */ + volatile unsigned char *port, *shadow; + volatile unsigned char *dir, *dir_shadow; + unsigned char changeable_dir; + unsigned char changeable_bits; + unsigned char clk_mask; + unsigned char data_mask; + unsigned char write_msb; + unsigned char pad1, pad2, pad3; + /* These fields are generic */ + unsigned long highalarm, lowalarm; + wait_queue_head_t alarm_wq; + int minor; +}; + +/* linked list of alarms to check for */ + +static struct gpio_private *alarmlist; + +static int gpio_some_alarms; /* Set if someone uses alarm */ +static unsigned long gpio_pa_irq_enabled_mask; + +static DEFINE_SPINLOCK(gpio_lock); /* Protect directions etc */ + +/* Port A and B use 8 bit access, but Port G is 32 bit */ +#define NUM_PORTS (GPIO_MINOR_B+1) + +static volatile unsigned char *ports[NUM_PORTS] = { + R_PORT_PA_DATA, + R_PORT_PB_DATA, +}; +static volatile unsigned char *shads[NUM_PORTS] = { + &port_pa_data_shadow, + &port_pb_data_shadow +}; + +/* What direction bits that are user changeable 1=changeable*/ +#ifndef CONFIG_ETRAX_PA_CHANGEABLE_DIR +#define CONFIG_ETRAX_PA_CHANGEABLE_DIR 0x00 +#endif +#ifndef CONFIG_ETRAX_PB_CHANGEABLE_DIR +#define CONFIG_ETRAX_PB_CHANGEABLE_DIR 0x00 +#endif + +#ifndef CONFIG_ETRAX_PA_CHANGEABLE_BITS +#define CONFIG_ETRAX_PA_CHANGEABLE_BITS 0xFF +#endif +#ifndef CONFIG_ETRAX_PB_CHANGEABLE_BITS +#define CONFIG_ETRAX_PB_CHANGEABLE_BITS 0xFF +#endif + + +static unsigned char changeable_dir[NUM_PORTS] = { + CONFIG_ETRAX_PA_CHANGEABLE_DIR, + CONFIG_ETRAX_PB_CHANGEABLE_DIR +}; +static unsigned char changeable_bits[NUM_PORTS] = { + CONFIG_ETRAX_PA_CHANGEABLE_BITS, + CONFIG_ETRAX_PB_CHANGEABLE_BITS +}; + +static volatile unsigned char *dir[NUM_PORTS] = { + R_PORT_PA_DIR, + R_PORT_PB_DIR +}; + +static volatile unsigned char *dir_shadow[NUM_PORTS] = { + &port_pa_dir_shadow, + &port_pb_dir_shadow +}; + +/* All bits in port g that can change dir. */ +static const unsigned long int changeable_dir_g_mask = 0x01FFFF01; + +/* Port G is 32 bit, handle it special, some bits are both inputs + and outputs at the same time, only some of the bits can change direction + and some of them in groups of 8 bit. */ +static unsigned long changeable_dir_g; +static unsigned long dir_g_in_bits; +static unsigned long dir_g_out_bits; +static unsigned long dir_g_shadow; /* 1=output */ + +#define USE_PORTS(priv) ((priv)->minor <= GPIO_MINOR_B) + + +static unsigned int gpio_poll(struct file *file, poll_table *wait) +{ + unsigned int mask = 0; + struct gpio_private *priv = file->private_data; + unsigned long data; + unsigned long flags; + + spin_lock_irqsave(&gpio_lock, flags); + + poll_wait(file, &priv->alarm_wq, wait); + if (priv->minor == GPIO_MINOR_A) { + unsigned long tmp; + data = *R_PORT_PA_DATA; + /* PA has support for high level interrupt - + * lets activate for those low and with highalarm set + */ + tmp = ~data & priv->highalarm & 0xFF; + tmp = (tmp << R_IRQ_MASK1_SET__pa0__BITNR); + + gpio_pa_irq_enabled_mask |= tmp; + *R_IRQ_MASK1_SET = tmp; + } else if (priv->minor == GPIO_MINOR_B) + data = *R_PORT_PB_DATA; + else if (priv->minor == GPIO_MINOR_G) + data = *R_PORT_G_DATA; + else { + mask = 0; + goto out; + } + + if ((data & priv->highalarm) || + (~data & priv->lowalarm)) { + mask = POLLIN|POLLRDNORM; + } + +out: + spin_unlock_irqrestore(&gpio_lock, flags); + DP(printk("gpio_poll ready: mask 0x%08X\n", mask)); + + return mask; +} + +int etrax_gpio_wake_up_check(void) +{ + struct gpio_private *priv; + unsigned long data = 0; + int ret = 0; + unsigned long flags; + + spin_lock_irqsave(&gpio_lock, flags); + priv = alarmlist; + while (priv) { + if (USE_PORTS(priv)) + data = *priv->port; + else if (priv->minor == GPIO_MINOR_G) + data = *R_PORT_G_DATA; + + if ((data & priv->highalarm) || + (~data & priv->lowalarm)) { + DP(printk("etrax_gpio_wake_up_check %i\n",priv->minor)); + wake_up_interruptible(&priv->alarm_wq); + ret = 1; + } + priv = priv->next; + } + spin_unlock_irqrestore(&gpio_lock, flags); + return ret; +} + +static irqreturn_t +gpio_poll_timer_interrupt(int irq, void *dev_id) +{ + if (gpio_some_alarms) { + etrax_gpio_wake_up_check(); + return IRQ_HANDLED; + } + return IRQ_NONE; +} + +static irqreturn_t +gpio_interrupt(int irq, void *dev_id) +{ + unsigned long tmp; + unsigned long flags; + + spin_lock_irqsave(&gpio_lock, flags); + + /* Find what PA interrupts are active */ + tmp = (*R_IRQ_READ1); + + /* Find those that we have enabled */ + tmp &= gpio_pa_irq_enabled_mask; + + /* Clear them.. */ + *R_IRQ_MASK1_CLR = tmp; + gpio_pa_irq_enabled_mask &= ~tmp; + + spin_unlock_irqrestore(&gpio_lock, flags); + + if (gpio_some_alarms) + return IRQ_RETVAL(etrax_gpio_wake_up_check()); + + return IRQ_NONE; +} + +static void gpio_write_bit(struct gpio_private *priv, + unsigned char data, int bit) +{ + *priv->port = *priv->shadow &= ~(priv->clk_mask); + if (data & 1 << bit) + *priv->port = *priv->shadow |= priv->data_mask; + else + *priv->port = *priv->shadow &= ~(priv->data_mask); + + /* For FPGA: min 5.0ns (DCC) before CCLK high */ + *priv->port = *priv->shadow |= priv->clk_mask; +} + +static void gpio_write_byte(struct gpio_private *priv, unsigned char data) +{ + int i; + + if (priv->write_msb) + for (i = 7; i >= 0; i--) + gpio_write_bit(priv, data, i); + else + for (i = 0; i <= 7; i++) + gpio_write_bit(priv, data, i); +} + +static ssize_t gpio_write(struct file *file, const char __user *buf, + size_t count, loff_t *off) +{ + struct gpio_private *priv = file->private_data; + unsigned long flags; + ssize_t retval = count; + + if (priv->minor != GPIO_MINOR_A && priv->minor != GPIO_MINOR_B) + return -EFAULT; + + if (!access_ok(VERIFY_READ, buf, count)) + return -EFAULT; + + spin_lock_irqsave(&gpio_lock, flags); + + /* It must have been configured using the IO_CFG_WRITE_MODE */ + /* Perhaps a better error code? */ + if (priv->clk_mask == 0 || priv->data_mask == 0) { + retval = -EPERM; + goto out; + } + + D(printk(KERN_DEBUG "gpio_write: %02X to data 0x%02X " + "clk 0x%02X msb: %i\n", + count, priv->data_mask, priv->clk_mask, priv->write_msb)); + + while (count--) + gpio_write_byte(priv, *buf++); + +out: + spin_unlock_irqrestore(&gpio_lock, flags); + return retval; +} + + + +static int +gpio_open(struct inode *inode, struct file *filp) +{ + struct gpio_private *priv; + int p = iminor(inode); + unsigned long flags; + + if (p > GPIO_MINOR_LAST) + return -EINVAL; + + priv = kzalloc(sizeof(struct gpio_private), GFP_KERNEL); + + if (!priv) + return -ENOMEM; + + priv->minor = p; + + /* initialize the io/alarm struct */ + + if (USE_PORTS(priv)) { /* A and B */ + priv->port = ports[p]; + priv->shadow = shads[p]; + priv->dir = dir[p]; + priv->dir_shadow = dir_shadow[p]; + priv->changeable_dir = changeable_dir[p]; + priv->changeable_bits = changeable_bits[p]; + } else { + priv->port = NULL; + priv->shadow = NULL; + priv->dir = NULL; + priv->dir_shadow = NULL; + priv->changeable_dir = 0; + priv->changeable_bits = 0; + } + + priv->highalarm = 0; + priv->lowalarm = 0; + priv->clk_mask = 0; + priv->data_mask = 0; + init_waitqueue_head(&priv->alarm_wq); + + filp->private_data = priv; + + /* link it into our alarmlist */ + spin_lock_irqsave(&gpio_lock, flags); + priv->next = alarmlist; + alarmlist = priv; + spin_unlock_irqrestore(&gpio_lock, flags); + + return 0; +} + +static int +gpio_release(struct inode *inode, struct file *filp) +{ + struct gpio_private *p; + struct gpio_private *todel; + unsigned long flags; + + spin_lock_irqsave(&gpio_lock, flags); + + p = alarmlist; + todel = filp->private_data; + + /* unlink from alarmlist and free the private structure */ + + if (p == todel) { + alarmlist = todel->next; + } else { + while (p->next != todel) + p = p->next; + p->next = todel->next; + } + + kfree(todel); + /* Check if there are still any alarms set */ + p = alarmlist; + while (p) { + if (p->highalarm | p->lowalarm) { + gpio_some_alarms = 1; + goto out; + } + p = p->next; + } + gpio_some_alarms = 0; +out: + spin_unlock_irqrestore(&gpio_lock, flags); + return 0; +} + +/* Main device API. ioctl's to read/set/clear bits, as well as to + * set alarms to wait for using a subsequent select(). + */ +unsigned long inline setget_input(struct gpio_private *priv, unsigned long arg) +{ + /* Set direction 0=unchanged 1=input, + * return mask with 1=input */ + if (USE_PORTS(priv)) { + *priv->dir = *priv->dir_shadow &= + ~((unsigned char)arg & priv->changeable_dir); + return ~(*priv->dir_shadow) & 0xFF; /* Only 8 bits */ + } + + if (priv->minor != GPIO_MINOR_G) + return 0; + + /* We must fiddle with R_GEN_CONFIG to change dir */ + if (((arg & dir_g_in_bits) != arg) && + (arg & changeable_dir_g)) { + arg &= changeable_dir_g; + /* Clear bits in genconfig to set to input */ + if (arg & (1<<0)) { + genconfig_shadow &= ~IO_MASK(R_GEN_CONFIG, g0dir); + dir_g_in_bits |= (1<<0); + dir_g_out_bits &= ~(1<<0); + } + if ((arg & 0x0000FF00) == 0x0000FF00) { + genconfig_shadow &= ~IO_MASK(R_GEN_CONFIG, g8_15dir); + dir_g_in_bits |= 0x0000FF00; + dir_g_out_bits &= ~0x0000FF00; + } + if ((arg & 0x00FF0000) == 0x00FF0000) { + genconfig_shadow &= ~IO_MASK(R_GEN_CONFIG, g16_23dir); + dir_g_in_bits |= 0x00FF0000; + dir_g_out_bits &= ~0x00FF0000; + } + if (arg & (1<<24)) { + genconfig_shadow &= ~IO_MASK(R_GEN_CONFIG, g24dir); + dir_g_in_bits |= (1<<24); + dir_g_out_bits &= ~(1<<24); + } + D(printk(KERN_DEBUG "gpio: SETINPUT on port G set " + "genconfig to 0x%08lX " + "in_bits: 0x%08lX " + "out_bits: 0x%08lX\n", + (unsigned long)genconfig_shadow, + dir_g_in_bits, dir_g_out_bits)); + *R_GEN_CONFIG = genconfig_shadow; + /* Must be a >120 ns delay before writing this again */ + + } + return dir_g_in_bits; +} /* setget_input */ + +unsigned long inline setget_output(struct gpio_private *priv, unsigned long arg) +{ + if (USE_PORTS(priv)) { + *priv->dir = *priv->dir_shadow |= + ((unsigned char)arg & priv->changeable_dir); + return *priv->dir_shadow; + } + if (priv->minor != GPIO_MINOR_G) + return 0; + + /* We must fiddle with R_GEN_CONFIG to change dir */ + if (((arg & dir_g_out_bits) != arg) && + (arg & changeable_dir_g)) { + /* Set bits in genconfig to set to output */ + if (arg & (1<<0)) { + genconfig_shadow |= IO_MASK(R_GEN_CONFIG, g0dir); + dir_g_out_bits |= (1<<0); + dir_g_in_bits &= ~(1<<0); + } + if ((arg & 0x0000FF00) == 0x0000FF00) { + genconfig_shadow |= IO_MASK(R_GEN_CONFIG, g8_15dir); + dir_g_out_bits |= 0x0000FF00; + dir_g_in_bits &= ~0x0000FF00; + } + if ((arg & 0x00FF0000) == 0x00FF0000) { + genconfig_shadow |= IO_MASK(R_GEN_CONFIG, g16_23dir); + dir_g_out_bits |= 0x00FF0000; + dir_g_in_bits &= ~0x00FF0000; + } + if (arg & (1<<24)) { + genconfig_shadow |= IO_MASK(R_GEN_CONFIG, g24dir); + dir_g_out_bits |= (1<<24); + dir_g_in_bits &= ~(1<<24); + } + D(printk(KERN_INFO "gpio: SETOUTPUT on port G set " + "genconfig to 0x%08lX " + "in_bits: 0x%08lX " + "out_bits: 0x%08lX\n", + (unsigned long)genconfig_shadow, + dir_g_in_bits, dir_g_out_bits)); + *R_GEN_CONFIG = genconfig_shadow; + /* Must be a >120 ns delay before writing this again */ + } + return dir_g_out_bits & 0x7FFFFFFF; +} /* setget_output */ + +static int +gpio_leds_ioctl(unsigned int cmd, unsigned long arg); + +static long gpio_ioctl(struct file *file, unsigned int cmd, unsigned long arg) +{ + unsigned long flags; + unsigned long val; + int ret = 0; + + struct gpio_private *priv = file->private_data; + if (_IOC_TYPE(cmd) != ETRAXGPIO_IOCTYPE) + return -EINVAL; + + switch (_IOC_NR(cmd)) { + case IO_READBITS: /* Use IO_READ_INBITS and IO_READ_OUTBITS instead */ + // read the port + spin_lock_irqsave(&gpio_lock, flags); + if (USE_PORTS(priv)) { + ret = *priv->port; + } else if (priv->minor == GPIO_MINOR_G) { + ret = (*R_PORT_G_DATA) & 0x7FFFFFFF; + } + spin_unlock_irqrestore(&gpio_lock, flags); + + break; + case IO_SETBITS: + // set changeable bits with a 1 in arg + spin_lock_irqsave(&gpio_lock, flags); + + if (USE_PORTS(priv)) { + *priv->port = *priv->shadow |= + ((unsigned char)arg & priv->changeable_bits); + } else if (priv->minor == GPIO_MINOR_G) { + *R_PORT_G_DATA = port_g_data_shadow |= (arg & dir_g_out_bits); + } + spin_unlock_irqrestore(&gpio_lock, flags); + + break; + case IO_CLRBITS: + // clear changeable bits with a 1 in arg + spin_lock_irqsave(&gpio_lock, flags); + if (USE_PORTS(priv)) { + *priv->port = *priv->shadow &= + ~((unsigned char)arg & priv->changeable_bits); + } else if (priv->minor == GPIO_MINOR_G) { + *R_PORT_G_DATA = port_g_data_shadow &= ~((unsigned long)arg & dir_g_out_bits); + } + spin_unlock_irqrestore(&gpio_lock, flags); + break; + case IO_HIGHALARM: + // set alarm when bits with 1 in arg go high + spin_lock_irqsave(&gpio_lock, flags); + priv->highalarm |= arg; + gpio_some_alarms = 1; + spin_unlock_irqrestore(&gpio_lock, flags); + break; + case IO_LOWALARM: + // set alarm when bits with 1 in arg go low + spin_lock_irqsave(&gpio_lock, flags); + priv->lowalarm |= arg; + gpio_some_alarms = 1; + spin_unlock_irqrestore(&gpio_lock, flags); + break; + case IO_CLRALARM: + /* clear alarm for bits with 1 in arg */ + spin_lock_irqsave(&gpio_lock, flags); + priv->highalarm &= ~arg; + priv->lowalarm &= ~arg; + { + /* Must update gpio_some_alarms */ + struct gpio_private *p = alarmlist; + int some_alarms; + p = alarmlist; + some_alarms = 0; + while (p) { + if (p->highalarm | p->lowalarm) { + some_alarms = 1; + break; + } + p = p->next; + } + gpio_some_alarms = some_alarms; + } + spin_unlock_irqrestore(&gpio_lock, flags); + break; + case IO_READDIR: /* Use IO_SETGET_INPUT/OUTPUT instead! */ + /* Read direction 0=input 1=output */ + spin_lock_irqsave(&gpio_lock, flags); + if (USE_PORTS(priv)) { + ret = *priv->dir_shadow; + } else if (priv->minor == GPIO_MINOR_G) { + /* Note: Some bits are both in and out, + * Those that are dual is set here as well. + */ + ret = (dir_g_shadow | dir_g_out_bits) & 0x7FFFFFFF; + } + spin_unlock_irqrestore(&gpio_lock, flags); + break; + case IO_SETINPUT: /* Use IO_SETGET_INPUT instead! */ + /* Set direction 0=unchanged 1=input, + * return mask with 1=input + */ + spin_lock_irqsave(&gpio_lock, flags); + ret = setget_input(priv, arg) & 0x7FFFFFFF; + spin_unlock_irqrestore(&gpio_lock, flags); + break; + case IO_SETOUTPUT: /* Use IO_SETGET_OUTPUT instead! */ + /* Set direction 0=unchanged 1=output, + * return mask with 1=output + */ + spin_lock_irqsave(&gpio_lock, flags); + ret = setget_output(priv, arg) & 0x7FFFFFFF; + spin_unlock_irqrestore(&gpio_lock, flags); + break; + case IO_SHUTDOWN: + spin_lock_irqsave(&gpio_lock, flags); + SOFT_SHUTDOWN(); + spin_unlock_irqrestore(&gpio_lock, flags); + break; + case IO_GET_PWR_BT: + spin_lock_irqsave(&gpio_lock, flags); +#if defined (CONFIG_ETRAX_SOFT_SHUTDOWN) + ret = (*R_PORT_G_DATA & ( 1 << CONFIG_ETRAX_POWERBUTTON_BIT)); +#else + ret = 0; +#endif + spin_unlock_irqrestore(&gpio_lock, flags); + break; + case IO_CFG_WRITE_MODE: + spin_lock_irqsave(&gpio_lock, flags); + priv->clk_mask = arg & 0xFF; + priv->data_mask = (arg >> 8) & 0xFF; + priv->write_msb = (arg >> 16) & 0x01; + /* Check if we're allowed to change the bits and + * the direction is correct + */ + if (!((priv->clk_mask & priv->changeable_bits) && + (priv->data_mask & priv->changeable_bits) && + (priv->clk_mask & *priv->dir_shadow) && + (priv->data_mask & *priv->dir_shadow))) + { + priv->clk_mask = 0; + priv->data_mask = 0; + ret = -EPERM; + } + spin_unlock_irqrestore(&gpio_lock, flags); + break; + case IO_READ_INBITS: + /* *arg is result of reading the input pins */ + spin_lock_irqsave(&gpio_lock, flags); + if (USE_PORTS(priv)) { + val = *priv->port; + } else if (priv->minor == GPIO_MINOR_G) { + val = *R_PORT_G_DATA; + } + spin_unlock_irqrestore(&gpio_lock, flags); + if (copy_to_user((void __user *)arg, &val, sizeof(val))) + ret = -EFAULT; + break; + case IO_READ_OUTBITS: + /* *arg is result of reading the output shadow */ + spin_lock_irqsave(&gpio_lock, flags); + if (USE_PORTS(priv)) { + val = *priv->shadow; + } else if (priv->minor == GPIO_MINOR_G) { + val = port_g_data_shadow; + } + spin_unlock_irqrestore(&gpio_lock, flags); + if (copy_to_user((void __user *)arg, &val, sizeof(val))) + ret = -EFAULT; + break; + case IO_SETGET_INPUT: + /* bits set in *arg is set to input, + * *arg updated with current input pins. + */ + if (copy_from_user(&val, (void __user *)arg, sizeof(val))) + { + ret = -EFAULT; + break; + } + spin_lock_irqsave(&gpio_lock, flags); + val = setget_input(priv, val); + spin_unlock_irqrestore(&gpio_lock, flags); + if (copy_to_user((void __user *)arg, &val, sizeof(val))) + ret = -EFAULT; + break; + case IO_SETGET_OUTPUT: + /* bits set in *arg is set to output, + * *arg updated with current output pins. + */ + if (copy_from_user(&val, (void __user *)arg, sizeof(val))) { + ret = -EFAULT; + break; + } + spin_lock_irqsave(&gpio_lock, flags); + val = setget_output(priv, val); + spin_unlock_irqrestore(&gpio_lock, flags); + if (copy_to_user((void __user *)arg, &val, sizeof(val))) + ret = -EFAULT; + break; + default: + spin_lock_irqsave(&gpio_lock, flags); + if (priv->minor == GPIO_MINOR_LEDS) + ret = gpio_leds_ioctl(cmd, arg); + else + ret = -EINVAL; + spin_unlock_irqrestore(&gpio_lock, flags); + } /* switch */ + + return ret; +} + +static int +gpio_leds_ioctl(unsigned int cmd, unsigned long arg) +{ + unsigned char green; + unsigned char red; + + switch (_IOC_NR(cmd)) { + case IO_LEDACTIVE_SET: + green = ((unsigned char)arg) & 1; + red = (((unsigned char)arg) >> 1) & 1; + CRIS_LED_ACTIVE_SET_G(green); + CRIS_LED_ACTIVE_SET_R(red); + break; + + case IO_LED_SETBIT: + CRIS_LED_BIT_SET(arg); + break; + + case IO_LED_CLRBIT: + CRIS_LED_BIT_CLR(arg); + break; + + default: + return -EINVAL; + } /* switch */ + + return 0; +} + +static const struct file_operations gpio_fops = { + .owner = THIS_MODULE, + .poll = gpio_poll, + .unlocked_ioctl = gpio_ioctl, + .write = gpio_write, + .open = gpio_open, + .release = gpio_release, + .llseek = noop_llseek, +}; + +static void ioif_watcher(const unsigned int gpio_in_available, + const unsigned int gpio_out_available, + const unsigned char pa_available, + const unsigned char pb_available) +{ + unsigned long int flags; + + D(printk(KERN_DEBUG "gpio.c: ioif_watcher called\n")); + D(printk(KERN_DEBUG "gpio.c: G in: 0x%08x G out: 0x%08x " + "PA: 0x%02x PB: 0x%02x\n", + gpio_in_available, gpio_out_available, + pa_available, pb_available)); + + spin_lock_irqsave(&gpio_lock, flags); + + dir_g_in_bits = gpio_in_available; + dir_g_out_bits = gpio_out_available; + + /* Initialise the dir_g_shadow etc. depending on genconfig */ + /* 0=input 1=output */ + if (genconfig_shadow & IO_STATE(R_GEN_CONFIG, g0dir, out)) + dir_g_shadow |= (1 << 0); + if (genconfig_shadow & IO_STATE(R_GEN_CONFIG, g8_15dir, out)) + dir_g_shadow |= 0x0000FF00; + if (genconfig_shadow & IO_STATE(R_GEN_CONFIG, g16_23dir, out)) + dir_g_shadow |= 0x00FF0000; + if (genconfig_shadow & IO_STATE(R_GEN_CONFIG, g24dir, out)) + dir_g_shadow |= (1 << 24); + + changeable_dir_g = changeable_dir_g_mask; + changeable_dir_g &= dir_g_out_bits; + changeable_dir_g &= dir_g_in_bits; + + /* Correct the bits that can change direction */ + dir_g_out_bits &= ~changeable_dir_g; + dir_g_out_bits |= dir_g_shadow; + dir_g_in_bits &= ~changeable_dir_g; + dir_g_in_bits |= (~dir_g_shadow & changeable_dir_g); + + spin_unlock_irqrestore(&gpio_lock, flags); + + printk(KERN_INFO "GPIO port G: in_bits: 0x%08lX out_bits: 0x%08lX " + "val: %08lX\n", + dir_g_in_bits, dir_g_out_bits, (unsigned long)*R_PORT_G_DATA); + printk(KERN_INFO "GPIO port G: dir: %08lX changeable: %08lX\n", + dir_g_shadow, changeable_dir_g); +} + +/* main driver initialization routine, called from mem.c */ + +static int __init gpio_init(void) +{ + int res; +#if defined (CONFIG_ETRAX_CSP0_LEDS) + int i; +#endif + + res = register_chrdev(GPIO_MAJOR, gpio_name, &gpio_fops); + if (res < 0) { + printk(KERN_ERR "gpio: couldn't get a major number.\n"); + return res; + } + + /* Clear all leds */ +#if defined (CONFIG_ETRAX_CSP0_LEDS) || defined (CONFIG_ETRAX_PA_LEDS) || defined (CONFIG_ETRAX_PB_LEDS) + CRIS_LED_NETWORK_SET(0); + CRIS_LED_ACTIVE_SET(0); + CRIS_LED_DISK_READ(0); + CRIS_LED_DISK_WRITE(0); + +#if defined (CONFIG_ETRAX_CSP0_LEDS) + for (i = 0; i < 32; i++) + CRIS_LED_BIT_SET(i); +#endif + +#endif + /* The I/O interface allocation watcher will be called when + * registering it. */ + if (cris_io_interface_register_watcher(ioif_watcher)){ + printk(KERN_WARNING "gpio_init: Failed to install IO " + "if allocator watcher\n"); + } + + printk(KERN_INFO "ETRAX 100LX GPIO driver v2.5, (c) 2001-2008 " + "Axis Communications AB\n"); + /* We call etrax_gpio_wake_up_check() from timer interrupt and + * from default_idle() in kernel/process.c + * The check in default_idle() reduces latency from ~15 ms to ~6 ms + * in some tests. + */ + res = request_irq(TIMER0_IRQ_NBR, gpio_poll_timer_interrupt, + IRQF_SHARED, "gpio poll", gpio_name); + if (res) { + printk(KERN_CRIT "err: timer0 irq for gpio\n"); + return res; + } + res = request_irq(PA_IRQ_NBR, gpio_interrupt, + IRQF_SHARED, "gpio PA", gpio_name); + if (res) + printk(KERN_CRIT "err: PA irq for gpio\n"); + + return res; +} + +/* this makes sure that gpio_init is called during kernel boot */ +module_init(gpio_init); + diff --git a/kernel/arch/cris/arch-v10/drivers/i2c.c b/kernel/arch/cris/arch-v10/drivers/i2c.c new file mode 100644 index 000000000..b3d1f9ed1 --- /dev/null +++ b/kernel/arch/cris/arch-v10/drivers/i2c.c @@ -0,0 +1,698 @@ +/*!*************************************************************************** +*! +*! FILE NAME : i2c.c +*! +*! DESCRIPTION: implements an interface for IIC/I2C, both directly from other +*! kernel modules (i2c_writereg/readreg) and from userspace using +*! ioctl()'s +*! +*! (C) Copyright 1999-2007 Axis Communications AB, LUND, SWEDEN +*! +*!***************************************************************************/ + +/****************** INCLUDE FILES SECTION ***********************************/ + +#include <linux/module.h> +#include <linux/sched.h> +#include <linux/errno.h> +#include <linux/kernel.h> +#include <linux/fs.h> +#include <linux/string.h> +#include <linux/init.h> + +#include <asm/etraxi2c.h> + +#include <arch/svinto.h> +#include <asm/io.h> +#include <asm/delay.h> +#include <arch/io_interface_mux.h> + +#include "i2c.h" + +/****************** I2C DEFINITION SECTION *************************/ + +#define D(x) + +#define I2C_MAJOR 123 /* LOCAL/EXPERIMENTAL */ +static const char i2c_name[] = "i2c"; + +#define CLOCK_LOW_TIME 8 +#define CLOCK_HIGH_TIME 8 +#define START_CONDITION_HOLD_TIME 8 +#define STOP_CONDITION_HOLD_TIME 8 +#define ENABLE_OUTPUT 0x01 +#define ENABLE_INPUT 0x00 +#define I2C_CLOCK_HIGH 1 +#define I2C_CLOCK_LOW 0 +#define I2C_DATA_HIGH 1 +#define I2C_DATA_LOW 0 + +#ifdef CONFIG_ETRAX_I2C_USES_PB_NOT_PB_I2C +/* Use PB and not PB_I2C */ +#ifndef CONFIG_ETRAX_I2C_DATA_PORT +#define CONFIG_ETRAX_I2C_DATA_PORT 0 +#endif +#ifndef CONFIG_ETRAX_I2C_CLK_PORT +#define CONFIG_ETRAX_I2C_CLK_PORT 1 +#endif + +#define SDABIT CONFIG_ETRAX_I2C_DATA_PORT +#define SCLBIT CONFIG_ETRAX_I2C_CLK_PORT +#define i2c_enable() +#define i2c_disable() + +/* enable or disable output-enable, to select output or input on the i2c bus */ + +#define i2c_dir_out() \ + REG_SHADOW_SET(R_PORT_PB_DIR, port_pb_dir_shadow, SDABIT, 1) +#define i2c_dir_in() \ + REG_SHADOW_SET(R_PORT_PB_DIR, port_pb_dir_shadow, SDABIT, 0) + +/* control the i2c clock and data signals */ + +#define i2c_clk(x) \ + REG_SHADOW_SET(R_PORT_PB_DATA, port_pb_data_shadow, SCLBIT, x) +#define i2c_data(x) \ + REG_SHADOW_SET(R_PORT_PB_DATA, port_pb_data_shadow, SDABIT, x) + +/* read a bit from the i2c interface */ + +#define i2c_getbit() (((*R_PORT_PB_READ & (1 << SDABIT))) >> SDABIT) + +#else +/* enable or disable the i2c interface */ + +#define i2c_enable() *R_PORT_PB_I2C = (port_pb_i2c_shadow |= IO_MASK(R_PORT_PB_I2C, i2c_en)) +#define i2c_disable() *R_PORT_PB_I2C = (port_pb_i2c_shadow &= ~IO_MASK(R_PORT_PB_I2C, i2c_en)) + +/* enable or disable output-enable, to select output or input on the i2c bus */ + +#define i2c_dir_out() \ + *R_PORT_PB_I2C = (port_pb_i2c_shadow &= ~IO_MASK(R_PORT_PB_I2C, i2c_oe_)); \ + REG_SHADOW_SET(R_PORT_PB_DIR, port_pb_dir_shadow, 0, 1); +#define i2c_dir_in() \ + *R_PORT_PB_I2C = (port_pb_i2c_shadow |= IO_MASK(R_PORT_PB_I2C, i2c_oe_)); \ + REG_SHADOW_SET(R_PORT_PB_DIR, port_pb_dir_shadow, 0, 0); + +/* control the i2c clock and data signals */ + +#define i2c_clk(x) \ + *R_PORT_PB_I2C = (port_pb_i2c_shadow = (port_pb_i2c_shadow & \ + ~IO_MASK(R_PORT_PB_I2C, i2c_clk)) | IO_FIELD(R_PORT_PB_I2C, i2c_clk, (x))); \ + REG_SHADOW_SET(R_PORT_PB_DATA, port_pb_data_shadow, 1, x); + +#define i2c_data(x) \ + *R_PORT_PB_I2C = (port_pb_i2c_shadow = (port_pb_i2c_shadow & \ + ~IO_MASK(R_PORT_PB_I2C, i2c_d)) | IO_FIELD(R_PORT_PB_I2C, i2c_d, (x))); \ + REG_SHADOW_SET(R_PORT_PB_DATA, port_pb_data_shadow, 0, x); + +/* read a bit from the i2c interface */ + +#define i2c_getbit() (*R_PORT_PB_READ & 0x1) +#endif + +/* use the kernels delay routine */ + +#define i2c_delay(usecs) udelay(usecs) + +static DEFINE_SPINLOCK(i2c_lock); /* Protect directions etc */ + +/****************** FUNCTION DEFINITION SECTION *************************/ + + +/* generate i2c start condition */ + +void +i2c_start(void) +{ + /* + * SCL=1 SDA=1 + */ + i2c_dir_out(); + i2c_delay(CLOCK_HIGH_TIME/6); + i2c_data(I2C_DATA_HIGH); + i2c_clk(I2C_CLOCK_HIGH); + i2c_delay(CLOCK_HIGH_TIME); + /* + * SCL=1 SDA=0 + */ + i2c_data(I2C_DATA_LOW); + i2c_delay(START_CONDITION_HOLD_TIME); + /* + * SCL=0 SDA=0 + */ + i2c_clk(I2C_CLOCK_LOW); + i2c_delay(CLOCK_LOW_TIME); +} + +/* generate i2c stop condition */ + +void +i2c_stop(void) +{ + i2c_dir_out(); + + /* + * SCL=0 SDA=0 + */ + i2c_clk(I2C_CLOCK_LOW); + i2c_data(I2C_DATA_LOW); + i2c_delay(CLOCK_LOW_TIME*2); + /* + * SCL=1 SDA=0 + */ + i2c_clk(I2C_CLOCK_HIGH); + i2c_delay(CLOCK_HIGH_TIME*2); + /* + * SCL=1 SDA=1 + */ + i2c_data(I2C_DATA_HIGH); + i2c_delay(STOP_CONDITION_HOLD_TIME); + + i2c_dir_in(); +} + +/* write a byte to the i2c interface */ + +void +i2c_outbyte(unsigned char x) +{ + int i; + + i2c_dir_out(); + + for (i = 0; i < 8; i++) { + if (x & 0x80) { + i2c_data(I2C_DATA_HIGH); + } else { + i2c_data(I2C_DATA_LOW); + } + + i2c_delay(CLOCK_LOW_TIME/2); + i2c_clk(I2C_CLOCK_HIGH); + i2c_delay(CLOCK_HIGH_TIME); + i2c_clk(I2C_CLOCK_LOW); + i2c_delay(CLOCK_LOW_TIME/2); + x <<= 1; + } + i2c_data(I2C_DATA_LOW); + i2c_delay(CLOCK_LOW_TIME/2); + + /* + * enable input + */ + i2c_dir_in(); +} + +/* read a byte from the i2c interface */ + +unsigned char +i2c_inbyte(void) +{ + unsigned char aBitByte = 0; + int i; + + /* Switch off I2C to get bit */ + i2c_disable(); + i2c_dir_in(); + i2c_delay(CLOCK_HIGH_TIME/2); + + /* Get bit */ + aBitByte |= i2c_getbit(); + + /* Enable I2C */ + i2c_enable(); + i2c_delay(CLOCK_LOW_TIME/2); + + for (i = 1; i < 8; i++) { + aBitByte <<= 1; + /* Clock pulse */ + i2c_clk(I2C_CLOCK_HIGH); + i2c_delay(CLOCK_HIGH_TIME); + i2c_clk(I2C_CLOCK_LOW); + i2c_delay(CLOCK_LOW_TIME); + + /* Switch off I2C to get bit */ + i2c_disable(); + i2c_dir_in(); + i2c_delay(CLOCK_HIGH_TIME/2); + + /* Get bit */ + aBitByte |= i2c_getbit(); + + /* Enable I2C */ + i2c_enable(); + i2c_delay(CLOCK_LOW_TIME/2); + } + i2c_clk(I2C_CLOCK_HIGH); + i2c_delay(CLOCK_HIGH_TIME); + + /* + * we leave the clock low, getbyte is usually followed + * by sendack/nack, they assume the clock to be low + */ + i2c_clk(I2C_CLOCK_LOW); + return aBitByte; +} + +/*#--------------------------------------------------------------------------- +*# +*# FUNCTION NAME: i2c_getack +*# +*# DESCRIPTION : checks if ack was received from ic2 +*# +*#--------------------------------------------------------------------------*/ + +int +i2c_getack(void) +{ + int ack = 1; + /* + * enable output + */ + i2c_dir_out(); + /* + * Release data bus by setting + * data high + */ + i2c_data(I2C_DATA_HIGH); + /* + * enable input + */ + i2c_dir_in(); + i2c_delay(CLOCK_HIGH_TIME/4); + /* + * generate ACK clock pulse + */ + i2c_clk(I2C_CLOCK_HIGH); + /* + * Use PORT PB instead of I2C + * for input. (I2C not working) + */ + i2c_clk(1); + i2c_data(1); + /* + * switch off I2C + */ + i2c_data(1); + i2c_disable(); + i2c_dir_in(); + /* + * now wait for ack + */ + i2c_delay(CLOCK_HIGH_TIME/2); + /* + * check for ack + */ + if(i2c_getbit()) + ack = 0; + i2c_delay(CLOCK_HIGH_TIME/2); + if(!ack){ + if(!i2c_getbit()) /* receiver pulld SDA low */ + ack = 1; + i2c_delay(CLOCK_HIGH_TIME/2); + } + + /* + * our clock is high now, make sure data is low + * before we enable our output. If we keep data high + * and enable output, we would generate a stop condition. + */ + i2c_data(I2C_DATA_LOW); + + /* + * end clock pulse + */ + i2c_enable(); + i2c_dir_out(); + i2c_clk(I2C_CLOCK_LOW); + i2c_delay(CLOCK_HIGH_TIME/4); + /* + * enable output + */ + i2c_dir_out(); + /* + * remove ACK clock pulse + */ + i2c_data(I2C_DATA_HIGH); + i2c_delay(CLOCK_LOW_TIME/2); + return ack; +} + +/*#--------------------------------------------------------------------------- +*# +*# FUNCTION NAME: I2C::sendAck +*# +*# DESCRIPTION : Send ACK on received data +*# +*#--------------------------------------------------------------------------*/ +void +i2c_sendack(void) +{ + /* + * enable output + */ + i2c_delay(CLOCK_LOW_TIME); + i2c_dir_out(); + /* + * set ack pulse high + */ + i2c_data(I2C_DATA_LOW); + /* + * generate clock pulse + */ + i2c_delay(CLOCK_HIGH_TIME/6); + i2c_clk(I2C_CLOCK_HIGH); + i2c_delay(CLOCK_HIGH_TIME); + i2c_clk(I2C_CLOCK_LOW); + i2c_delay(CLOCK_LOW_TIME/6); + /* + * reset data out + */ + i2c_data(I2C_DATA_HIGH); + i2c_delay(CLOCK_LOW_TIME); + + i2c_dir_in(); +} + +/*#--------------------------------------------------------------------------- +*# +*# FUNCTION NAME: i2c_sendnack +*# +*# DESCRIPTION : Sends NACK on received data +*# +*#--------------------------------------------------------------------------*/ +void +i2c_sendnack(void) +{ + /* + * enable output + */ + i2c_delay(CLOCK_LOW_TIME); + i2c_dir_out(); + /* + * set data high + */ + i2c_data(I2C_DATA_HIGH); + /* + * generate clock pulse + */ + i2c_delay(CLOCK_HIGH_TIME/6); + i2c_clk(I2C_CLOCK_HIGH); + i2c_delay(CLOCK_HIGH_TIME); + i2c_clk(I2C_CLOCK_LOW); + i2c_delay(CLOCK_LOW_TIME); + + i2c_dir_in(); +} + +/*#--------------------------------------------------------------------------- +*# +*# FUNCTION NAME: i2c_writereg +*# +*# DESCRIPTION : Writes a value to an I2C device +*# +*#--------------------------------------------------------------------------*/ +int +i2c_writereg(unsigned char theSlave, unsigned char theReg, + unsigned char theValue) +{ + int error, cntr = 3; + unsigned long flags; + + spin_lock(&i2c_lock); + + do { + error = 0; + /* + * we don't like to be interrupted + */ + local_irq_save(flags); + + i2c_start(); + /* + * send slave address + */ + i2c_outbyte((theSlave & 0xfe)); + /* + * wait for ack + */ + if(!i2c_getack()) + error = 1; + /* + * now select register + */ + i2c_dir_out(); + i2c_outbyte(theReg); + /* + * now it's time to wait for ack + */ + if(!i2c_getack()) + error |= 2; + /* + * send register register data + */ + i2c_outbyte(theValue); + /* + * now it's time to wait for ack + */ + if(!i2c_getack()) + error |= 4; + /* + * end byte stream + */ + i2c_stop(); + /* + * enable interrupt again + */ + local_irq_restore(flags); + + } while(error && cntr--); + + i2c_delay(CLOCK_LOW_TIME); + + spin_unlock(&i2c_lock); + + return -error; +} + +/*#--------------------------------------------------------------------------- +*# +*# FUNCTION NAME: i2c_readreg +*# +*# DESCRIPTION : Reads a value from the decoder registers. +*# +*#--------------------------------------------------------------------------*/ +unsigned char +i2c_readreg(unsigned char theSlave, unsigned char theReg) +{ + unsigned char b = 0; + int error, cntr = 3; + unsigned long flags; + + spin_lock(&i2c_lock); + + do { + error = 0; + /* + * we don't like to be interrupted + */ + local_irq_save(flags); + /* + * generate start condition + */ + i2c_start(); + + /* + * send slave address + */ + i2c_outbyte((theSlave & 0xfe)); + /* + * wait for ack + */ + if(!i2c_getack()) + error = 1; + /* + * now select register + */ + i2c_dir_out(); + i2c_outbyte(theReg); + /* + * now it's time to wait for ack + */ + if(!i2c_getack()) + error = 1; + /* + * repeat start condition + */ + i2c_delay(CLOCK_LOW_TIME); + i2c_start(); + /* + * send slave address + */ + i2c_outbyte(theSlave | 0x01); + /* + * wait for ack + */ + if(!i2c_getack()) + error = 1; + /* + * fetch register + */ + b = i2c_inbyte(); + /* + * last received byte needs to be nacked + * instead of acked + */ + i2c_sendnack(); + /* + * end sequence + */ + i2c_stop(); + /* + * enable interrupt again + */ + local_irq_restore(flags); + + } while(error && cntr--); + + spin_unlock(&i2c_lock); + + return b; +} + +static int +i2c_open(struct inode *inode, struct file *filp) +{ + return 0; +} + +static int +i2c_release(struct inode *inode, struct file *filp) +{ + return 0; +} + +/* Main device API. ioctl's to write or read to/from i2c registers. + */ + +static long i2c_ioctl(struct file *file, unsigned int cmd, unsigned long arg) +{ + if(_IOC_TYPE(cmd) != ETRAXI2C_IOCTYPE) { + return -EINVAL; + } + + switch (_IOC_NR(cmd)) { + case I2C_WRITEREG: + /* write to an i2c slave */ + D(printk(KERN_DEBUG "i2cw %d %d %d\n", + I2C_ARGSLAVE(arg), + I2C_ARGREG(arg), + I2C_ARGVALUE(arg))); + + return i2c_writereg(I2C_ARGSLAVE(arg), + I2C_ARGREG(arg), + I2C_ARGVALUE(arg)); + case I2C_READREG: + { + unsigned char val; + /* read from an i2c slave */ + D(printk(KERN_DEBUG "i2cr %d %d ", + I2C_ARGSLAVE(arg), + I2C_ARGREG(arg))); + val = i2c_readreg(I2C_ARGSLAVE(arg), I2C_ARGREG(arg)); + D(printk(KERN_DEBUG "= %d\n", val)); + return val; + } + default: + return -EINVAL; + + } + return 0; +} + +static const struct file_operations i2c_fops = { + .owner = THIS_MODULE, + .unlocked_ioctl = i2c_ioctl, + .open = i2c_open, + .release = i2c_release, + .llseek = noop_llseek, +}; + +int __init +i2c_init(void) +{ + static int res = 0; + static int first = 1; + + if (!first) { + return res; + } + first = 0; + + /* Setup and enable the Port B I2C interface */ + +#ifndef CONFIG_ETRAX_I2C_USES_PB_NOT_PB_I2C + if ((res = cris_request_io_interface(if_i2c, "I2C"))) { + printk(KERN_CRIT "i2c_init: Failed to get IO interface\n"); + return res; + } + + *R_PORT_PB_I2C = port_pb_i2c_shadow |= + IO_STATE(R_PORT_PB_I2C, i2c_en, on) | + IO_FIELD(R_PORT_PB_I2C, i2c_d, 1) | + IO_FIELD(R_PORT_PB_I2C, i2c_clk, 1) | + IO_STATE(R_PORT_PB_I2C, i2c_oe_, enable); + + port_pb_dir_shadow &= ~IO_MASK(R_PORT_PB_DIR, dir0); + port_pb_dir_shadow &= ~IO_MASK(R_PORT_PB_DIR, dir1); + + *R_PORT_PB_DIR = (port_pb_dir_shadow |= + IO_STATE(R_PORT_PB_DIR, dir0, input) | + IO_STATE(R_PORT_PB_DIR, dir1, output)); +#else + if ((res = cris_io_interface_allocate_pins(if_i2c, + 'b', + CONFIG_ETRAX_I2C_DATA_PORT, + CONFIG_ETRAX_I2C_DATA_PORT))) { + printk(KERN_WARNING "i2c_init: Failed to get IO pin for I2C data port\n"); + return res; + } else if ((res = cris_io_interface_allocate_pins(if_i2c, + 'b', + CONFIG_ETRAX_I2C_CLK_PORT, + CONFIG_ETRAX_I2C_CLK_PORT))) { + cris_io_interface_free_pins(if_i2c, + 'b', + CONFIG_ETRAX_I2C_DATA_PORT, + CONFIG_ETRAX_I2C_DATA_PORT); + printk(KERN_WARNING "i2c_init: Failed to get IO pin for I2C clk port\n"); + } +#endif + + return res; +} + +static int __init +i2c_register(void) +{ + int res; + + res = i2c_init(); + if (res < 0) + return res; + res = register_chrdev(I2C_MAJOR, i2c_name, &i2c_fops); + if(res < 0) { + printk(KERN_ERR "i2c: couldn't get a major number.\n"); + return res; + } + + printk(KERN_INFO "I2C driver v2.2, (c) 1999-2004 Axis Communications AB\n"); + + return 0; +} + +/* this makes sure that i2c_register is called during boot */ + +module_init(i2c_register); + +/****************** END OF FILE i2c.c ********************************/ diff --git a/kernel/arch/cris/arch-v10/drivers/i2c.h b/kernel/arch/cris/arch-v10/drivers/i2c.h new file mode 100644 index 000000000..e36c96276 --- /dev/null +++ b/kernel/arch/cris/arch-v10/drivers/i2c.h @@ -0,0 +1,17 @@ +/* i2c.h */ +int i2c_init(void); + +/* High level I2C actions */ +int i2c_writereg(unsigned char theSlave, unsigned char theReg, unsigned char theValue); +unsigned char i2c_readreg(unsigned char theSlave, unsigned char theReg); + +/* Low level I2C */ +void i2c_start(void); +void i2c_stop(void); +void i2c_outbyte(unsigned char x); +unsigned char i2c_inbyte(void); +int i2c_getack(void); +void i2c_sendack(void); + + + diff --git a/kernel/arch/cris/arch-v10/drivers/sync_serial.c b/kernel/arch/cris/arch-v10/drivers/sync_serial.c new file mode 100644 index 000000000..0f3983241 --- /dev/null +++ b/kernel/arch/cris/arch-v10/drivers/sync_serial.c @@ -0,0 +1,1462 @@ +/* + * Simple synchronous serial port driver for ETRAX 100LX. + * + * Synchronous serial ports are used for continuous streamed data like audio. + * The default setting for this driver is compatible with the STA 013 MP3 + * decoder. The driver can easily be tuned to fit other audio encoder/decoders + * and SPI + * + * Copyright (c) 2001-2008 Axis Communications AB + * + * Author: Mikael Starvik, Johan Adolfsson + * + */ +#include <linux/module.h> +#include <linux/kernel.h> +#include <linux/types.h> +#include <linux/errno.h> +#include <linux/major.h> +#include <linux/sched.h> +#include <linux/interrupt.h> +#include <linux/poll.h> +#include <linux/init.h> +#include <linux/mutex.h> +#include <linux/timer.h> +#include <linux/wait.h> +#include <asm/irq.h> +#include <asm/dma.h> +#include <asm/io.h> +#include <arch/svinto.h> +#include <asm/uaccess.h> +#include <asm/sync_serial.h> +#include <arch/io_interface_mux.h> + +/* The receiver is a bit tricky because of the continuous stream of data.*/ +/* */ +/* Three DMA descriptors are linked together. Each DMA descriptor is */ +/* responsible for port->bufchunk of a common buffer. */ +/* */ +/* +---------------------------------------------+ */ +/* | +----------+ +----------+ +----------+ | */ +/* +-> | Descr[0] |-->| Descr[1] |-->| Descr[2] |-+ */ +/* +----------+ +----------+ +----------+ */ +/* | | | */ +/* v v v */ +/* +-------------------------------------+ */ +/* | BUFFER | */ +/* +-------------------------------------+ */ +/* |<- data_avail ->| */ +/* readp writep */ +/* */ +/* If the application keeps up the pace readp will be right after writep.*/ +/* If the application can't keep the pace we have to throw away data. */ +/* The idea is that readp should be ready with the data pointed out by */ +/* Descr[i] when the DMA has filled in Descr[i+1]. */ +/* Otherwise we will discard */ +/* the rest of the data pointed out by Descr1 and set readp to the start */ +/* of Descr2 */ + +#define SYNC_SERIAL_MAJOR 125 + +/* IN_BUFFER_SIZE should be a multiple of 6 to make sure that 24 bit */ +/* words can be handled */ +#define IN_BUFFER_SIZE 12288 +#define IN_DESCR_SIZE 256 +#define NUM_IN_DESCR (IN_BUFFER_SIZE/IN_DESCR_SIZE) +#define OUT_BUFFER_SIZE 4096 + +#define DEFAULT_FRAME_RATE 0 +#define DEFAULT_WORD_RATE 7 + +/* NOTE: Enabling some debug will likely cause overrun or underrun, + * especially if manual mode is use. + */ +#define DEBUG(x) +#define DEBUGREAD(x) +#define DEBUGWRITE(x) +#define DEBUGPOLL(x) +#define DEBUGRXINT(x) +#define DEBUGTXINT(x) + +/* Define some macros to access ETRAX 100 registers */ +#define SETF(var, reg, field, val) \ + do { \ + var = (var & ~IO_MASK_(reg##_, field##_)) | \ + IO_FIELD_(reg##_, field##_, val); \ + } while (0) + +#define SETS(var, reg, field, val) \ + do { \ + var = (var & ~IO_MASK_(reg##_, field##_)) | \ + IO_STATE_(reg##_, field##_, _##val); \ + } while (0) + +struct sync_port { + /* Etrax registers and bits*/ + const volatile unsigned *const status; + volatile unsigned *const ctrl_data; + volatile unsigned *const output_dma_first; + volatile unsigned char *const output_dma_cmd; + volatile unsigned char *const output_dma_clr_irq; + volatile unsigned *const input_dma_first; + volatile unsigned char *const input_dma_cmd; + volatile unsigned *const input_dma_descr; + /* 8*4 */ + volatile unsigned char *const input_dma_clr_irq; + volatile unsigned *const data_out; + const volatile unsigned *const data_in; + char data_avail_bit; /* In R_IRQ_MASK1_RD/SET/CLR */ + char transmitter_ready_bit; /* In R_IRQ_MASK1_RD/SET/CLR */ + char input_dma_descr_bit; /* In R_IRQ_MASK2_RD */ + + char output_dma_bit; /* In R_IRQ_MASK2_RD */ + /* End of fields initialised in array */ + char started; /* 1 if port has been started */ + char port_nbr; /* Port 0 or 1 */ + char busy; /* 1 if port is busy */ + + char enabled; /* 1 if port is enabled */ + char use_dma; /* 1 if port uses dma */ + char tr_running; + + char init_irqs; + + /* Register shadow */ + unsigned int ctrl_data_shadow; + /* Remaining bytes for current transfer */ + volatile unsigned int out_count; + /* Current position in out_buffer */ + unsigned char *outp; + /* 16*4 */ + /* Next byte to be read by application */ + volatile unsigned char *volatile readp; + /* Next byte to be written by etrax */ + volatile unsigned char *volatile writep; + + unsigned int in_buffer_size; + unsigned int inbufchunk; + struct etrax_dma_descr out_descr __attribute__ ((aligned(32))); + struct etrax_dma_descr in_descr[NUM_IN_DESCR] __attribute__ ((aligned(32))); + unsigned char out_buffer[OUT_BUFFER_SIZE] __attribute__ ((aligned(32))); + unsigned char in_buffer[IN_BUFFER_SIZE]__attribute__ ((aligned(32))); + unsigned char flip[IN_BUFFER_SIZE] __attribute__ ((aligned(32))); + struct etrax_dma_descr *next_rx_desc; + struct etrax_dma_descr *prev_rx_desc; + int full; + + wait_queue_head_t out_wait_q; + wait_queue_head_t in_wait_q; +}; + + +static DEFINE_MUTEX(sync_serial_mutex); +static int etrax_sync_serial_init(void); +static void initialize_port(int portnbr); +static inline int sync_data_avail(struct sync_port *port); + +static int sync_serial_open(struct inode *inode, struct file *file); +static int sync_serial_release(struct inode *inode, struct file *file); +static unsigned int sync_serial_poll(struct file *filp, poll_table *wait); + +static long sync_serial_ioctl(struct file *file, + unsigned int cmd, unsigned long arg); +static ssize_t sync_serial_write(struct file *file, const char *buf, + size_t count, loff_t *ppos); +static ssize_t sync_serial_read(struct file *file, char *buf, + size_t count, loff_t *ppos); + +#if ((defined(CONFIG_ETRAX_SYNCHRONOUS_SERIAL_PORT0) && \ + defined(CONFIG_ETRAX_SYNCHRONOUS_SERIAL0_DMA)) || \ + (defined(CONFIG_ETRAX_SYNCHRONOUS_SERIAL_PORT1) && \ + defined(CONFIG_ETRAX_SYNCHRONOUS_SERIAL1_DMA))) +#define SYNC_SER_DMA +#endif + +static void send_word(struct sync_port *port); +static void start_dma(struct sync_port *port, const char *data, int count); +static void start_dma_in(struct sync_port *port); +#ifdef SYNC_SER_DMA +static irqreturn_t tr_interrupt(int irq, void *dev_id); +static irqreturn_t rx_interrupt(int irq, void *dev_id); +#endif +#if ((defined(CONFIG_ETRAX_SYNCHRONOUS_SERIAL_PORT0) && \ + !defined(CONFIG_ETRAX_SYNCHRONOUS_SERIAL0_DMA)) || \ + (defined(CONFIG_ETRAX_SYNCHRONOUS_SERIAL_PORT1) && \ + !defined(CONFIG_ETRAX_SYNCHRONOUS_SERIAL1_DMA))) +#define SYNC_SER_MANUAL +#endif +#ifdef SYNC_SER_MANUAL +static irqreturn_t manual_interrupt(int irq, void *dev_id); +#endif + +/* The ports */ +static struct sync_port ports[] = { + { + .status = R_SYNC_SERIAL1_STATUS, + .ctrl_data = R_SYNC_SERIAL1_CTRL, + .output_dma_first = R_DMA_CH8_FIRST, + .output_dma_cmd = R_DMA_CH8_CMD, + .output_dma_clr_irq = R_DMA_CH8_CLR_INTR, + .input_dma_first = R_DMA_CH9_FIRST, + .input_dma_cmd = R_DMA_CH9_CMD, + .input_dma_descr = R_DMA_CH9_DESCR, + .input_dma_clr_irq = R_DMA_CH9_CLR_INTR, + .data_out = R_SYNC_SERIAL1_TR_DATA, + .data_in = R_SYNC_SERIAL1_REC_DATA, + .data_avail_bit = IO_BITNR(R_IRQ_MASK1_RD, ser1_data), + .transmitter_ready_bit = IO_BITNR(R_IRQ_MASK1_RD, ser1_ready), + .input_dma_descr_bit = IO_BITNR(R_IRQ_MASK2_RD, dma9_descr), + .output_dma_bit = IO_BITNR(R_IRQ_MASK2_RD, dma8_eop), + .init_irqs = 1, +#if defined(CONFIG_ETRAX_SYNCHRONOUS_SERIAL0_DMA) + .use_dma = 1, +#else + .use_dma = 0, +#endif + }, + { + .status = R_SYNC_SERIAL3_STATUS, + .ctrl_data = R_SYNC_SERIAL3_CTRL, + .output_dma_first = R_DMA_CH4_FIRST, + .output_dma_cmd = R_DMA_CH4_CMD, + .output_dma_clr_irq = R_DMA_CH4_CLR_INTR, + .input_dma_first = R_DMA_CH5_FIRST, + .input_dma_cmd = R_DMA_CH5_CMD, + .input_dma_descr = R_DMA_CH5_DESCR, + .input_dma_clr_irq = R_DMA_CH5_CLR_INTR, + .data_out = R_SYNC_SERIAL3_TR_DATA, + .data_in = R_SYNC_SERIAL3_REC_DATA, + .data_avail_bit = IO_BITNR(R_IRQ_MASK1_RD, ser3_data), + .transmitter_ready_bit = IO_BITNR(R_IRQ_MASK1_RD, ser3_ready), + .input_dma_descr_bit = IO_BITNR(R_IRQ_MASK2_RD, dma5_descr), + .output_dma_bit = IO_BITNR(R_IRQ_MASK2_RD, dma4_eop), + .init_irqs = 1, +#if defined(CONFIG_ETRAX_SYNCHRONOUS_SERIAL1_DMA) + .use_dma = 1, +#else + .use_dma = 0, +#endif + } +}; + +/* Register shadows */ +static unsigned sync_serial_prescale_shadow; + +#define NUMBER_OF_PORTS 2 + +static const struct file_operations sync_serial_fops = { + .owner = THIS_MODULE, + .write = sync_serial_write, + .read = sync_serial_read, + .poll = sync_serial_poll, + .unlocked_ioctl = sync_serial_ioctl, + .open = sync_serial_open, + .release = sync_serial_release, + .llseek = noop_llseek, +}; + +static int __init etrax_sync_serial_init(void) +{ + ports[0].enabled = 0; + ports[1].enabled = 0; + +#if defined(CONFIG_ETRAX_SYNCHRONOUS_SERIAL_PORT0) + if (cris_request_io_interface(if_sync_serial_1, "sync_ser1")) { + printk(KERN_CRIT "ETRAX100LX sync_serial: " + "Could not allocate IO group for port %d\n", 0); + return -EBUSY; + } +#endif +#if defined(CONFIG_ETRAX_SYNCHRONOUS_SERIAL_PORT1) + if (cris_request_io_interface(if_sync_serial_3, "sync_ser3")) { +#if defined(CONFIG_ETRAX_SYNCHRONOUS_SERIAL_PORT0) + cris_free_io_interface(if_sync_serial_1); +#endif + printk(KERN_CRIT "ETRAX100LX sync_serial: " + "Could not allocate IO group for port %d\n", 1); + return -EBUSY; + } +#endif + + if (register_chrdev(SYNC_SERIAL_MAJOR, "sync serial", + &sync_serial_fops) < 0) { +#if defined(CONFIG_ETRAX_SYNCHRONOUS_SERIAL_PORT1) + cris_free_io_interface(if_sync_serial_3); +#endif +#if defined(CONFIG_ETRAX_SYNCHRONOUS_SERIAL_PORT0) + cris_free_io_interface(if_sync_serial_1); +#endif + printk("unable to get major for synchronous serial port\n"); + return -EBUSY; + } + + /* Deselect synchronous serial ports while configuring. */ + SETS(gen_config_ii_shadow, R_GEN_CONFIG_II, sermode1, async); + SETS(gen_config_ii_shadow, R_GEN_CONFIG_II, sermode3, async); + *R_GEN_CONFIG_II = gen_config_ii_shadow; + + /* Initialize Ports */ +#if defined(CONFIG_ETRAX_SYNCHRONOUS_SERIAL_PORT0) + ports[0].enabled = 1; + SETS(port_pb_i2c_shadow, R_PORT_PB_I2C, syncser1, ss1extra); + SETS(gen_config_ii_shadow, R_GEN_CONFIG_II, sermode1, sync); +#if defined(CONFIG_ETRAX_SYNCHRONOUS_SERIAL0_DMA) + ports[0].use_dma = 1; +#else + ports[0].use_dma = 0; +#endif + initialize_port(0); +#endif + +#if defined(CONFIG_ETRAX_SYNCHRONOUS_SERIAL_PORT1) + ports[1].enabled = 1; + SETS(port_pb_i2c_shadow, R_PORT_PB_I2C, syncser3, ss3extra); + SETS(gen_config_ii_shadow, R_GEN_CONFIG_II, sermode3, sync); +#if defined(CONFIG_ETRAX_SYNCHRONOUS_SERIAL1_DMA) + ports[1].use_dma = 1; +#else + ports[1].use_dma = 0; +#endif + initialize_port(1); +#endif + + *R_PORT_PB_I2C = port_pb_i2c_shadow; /* Use PB4/PB7 */ + + /* Set up timing */ + *R_SYNC_SERIAL_PRESCALE = sync_serial_prescale_shadow = ( + IO_STATE(R_SYNC_SERIAL_PRESCALE, clk_sel_u1, codec) | + IO_STATE(R_SYNC_SERIAL_PRESCALE, word_stb_sel_u1, external) | + IO_STATE(R_SYNC_SERIAL_PRESCALE, clk_sel_u3, codec) | + IO_STATE(R_SYNC_SERIAL_PRESCALE, word_stb_sel_u3, external) | + IO_STATE(R_SYNC_SERIAL_PRESCALE, prescaler, div4) | + IO_FIELD(R_SYNC_SERIAL_PRESCALE, frame_rate, + DEFAULT_FRAME_RATE) | + IO_FIELD(R_SYNC_SERIAL_PRESCALE, word_rate, DEFAULT_WORD_RATE) | + IO_STATE(R_SYNC_SERIAL_PRESCALE, warp_mode, normal)); + + /* Select synchronous ports */ + *R_GEN_CONFIG_II = gen_config_ii_shadow; + + printk(KERN_INFO "ETRAX 100LX synchronous serial port driver\n"); + return 0; +} + +static void __init initialize_port(int portnbr) +{ + struct sync_port *port = &ports[portnbr]; + + DEBUG(printk(KERN_DEBUG "Init sync serial port %d\n", portnbr)); + + port->started = 0; + port->port_nbr = portnbr; + port->busy = 0; + port->tr_running = 0; + + port->out_count = 0; + port->outp = port->out_buffer; + + port->readp = port->flip; + port->writep = port->flip; + port->in_buffer_size = IN_BUFFER_SIZE; + port->inbufchunk = IN_DESCR_SIZE; + port->next_rx_desc = &port->in_descr[0]; + port->prev_rx_desc = &port->in_descr[NUM_IN_DESCR-1]; + port->prev_rx_desc->ctrl = d_eol; + + init_waitqueue_head(&port->out_wait_q); + init_waitqueue_head(&port->in_wait_q); + + port->ctrl_data_shadow = + IO_STATE(R_SYNC_SERIAL1_CTRL, tr_baud, c115k2Hz) | + IO_STATE(R_SYNC_SERIAL1_CTRL, mode, master_output) | + IO_STATE(R_SYNC_SERIAL1_CTRL, error, ignore) | + IO_STATE(R_SYNC_SERIAL1_CTRL, rec_enable, disable) | + IO_STATE(R_SYNC_SERIAL1_CTRL, f_synctype, normal) | + IO_STATE(R_SYNC_SERIAL1_CTRL, f_syncsize, word) | + IO_STATE(R_SYNC_SERIAL1_CTRL, f_sync, on) | + IO_STATE(R_SYNC_SERIAL1_CTRL, clk_mode, normal) | + IO_STATE(R_SYNC_SERIAL1_CTRL, clk_halt, stopped) | + IO_STATE(R_SYNC_SERIAL1_CTRL, bitorder, msb) | + IO_STATE(R_SYNC_SERIAL1_CTRL, tr_enable, disable) | + IO_STATE(R_SYNC_SERIAL1_CTRL, wordsize, size8bit) | + IO_STATE(R_SYNC_SERIAL1_CTRL, buf_empty, lmt_8) | + IO_STATE(R_SYNC_SERIAL1_CTRL, buf_full, lmt_8) | + IO_STATE(R_SYNC_SERIAL1_CTRL, flow_ctrl, enabled) | + IO_STATE(R_SYNC_SERIAL1_CTRL, clk_polarity, neg) | + IO_STATE(R_SYNC_SERIAL1_CTRL, frame_polarity, normal)| + IO_STATE(R_SYNC_SERIAL1_CTRL, status_polarity, inverted)| + IO_STATE(R_SYNC_SERIAL1_CTRL, clk_driver, normal) | + IO_STATE(R_SYNC_SERIAL1_CTRL, frame_driver, normal) | + IO_STATE(R_SYNC_SERIAL1_CTRL, status_driver, normal)| + IO_STATE(R_SYNC_SERIAL1_CTRL, def_out0, high); + + if (port->use_dma) + port->ctrl_data_shadow |= IO_STATE(R_SYNC_SERIAL1_CTRL, + dma_enable, on); + else + port->ctrl_data_shadow |= IO_STATE(R_SYNC_SERIAL1_CTRL, + dma_enable, off); + + *port->ctrl_data = port->ctrl_data_shadow; +} + +static inline int sync_data_avail(struct sync_port *port) +{ + int avail; + unsigned char *start; + unsigned char *end; + + start = (unsigned char *)port->readp; /* cast away volatile */ + end = (unsigned char *)port->writep; /* cast away volatile */ + /* 0123456789 0123456789 + * ----- - ----- + * ^rp ^wp ^wp ^rp + */ + if (end >= start) + avail = end - start; + else + avail = port->in_buffer_size - (start - end); + return avail; +} + +static inline int sync_data_avail_to_end(struct sync_port *port) +{ + int avail; + unsigned char *start; + unsigned char *end; + + start = (unsigned char *)port->readp; /* cast away volatile */ + end = (unsigned char *)port->writep; /* cast away volatile */ + /* 0123456789 0123456789 + * ----- ----- + * ^rp ^wp ^wp ^rp + */ + + if (end >= start) + avail = end - start; + else + avail = port->flip + port->in_buffer_size - start; + return avail; +} + + +static int sync_serial_open(struct inode *inode, struct file *file) +{ + int dev = MINOR(inode->i_rdev); + struct sync_port *port; + int mode; + int err = -EBUSY; + + mutex_lock(&sync_serial_mutex); + DEBUG(printk(KERN_DEBUG "Open sync serial port %d\n", dev)); + + if (dev < 0 || dev >= NUMBER_OF_PORTS || !ports[dev].enabled) { + DEBUG(printk(KERN_DEBUG "Invalid minor %d\n", dev)); + err = -ENODEV; + goto out; + } + port = &ports[dev]; + /* Allow open this device twice (assuming one reader and one writer) */ + if (port->busy == 2) { + DEBUG(printk(KERN_DEBUG "Device is busy.. \n")); + goto out; + } + if (port->init_irqs) { + if (port->use_dma) { + if (port == &ports[0]) { +#ifdef SYNC_SER_DMA + if (request_irq(24, tr_interrupt, 0, + "synchronous serial 1 dma tr", + &ports[0])) { + printk(KERN_CRIT "Can't alloc " + "sync serial port 1 IRQ"); + goto out; + } else if (request_irq(25, rx_interrupt, 0, + "synchronous serial 1 dma rx", + &ports[0])) { + free_irq(24, &port[0]); + printk(KERN_CRIT "Can't alloc " + "sync serial port 1 IRQ"); + goto out; + } else if (cris_request_dma(8, + "synchronous serial 1 dma tr", + DMA_VERBOSE_ON_ERROR, + dma_ser1)) { + free_irq(24, &port[0]); + free_irq(25, &port[0]); + printk(KERN_CRIT "Can't alloc " + "sync serial port 1 " + "TX DMA channel"); + goto out; + } else if (cris_request_dma(9, + "synchronous serial 1 dma rec", + DMA_VERBOSE_ON_ERROR, + dma_ser1)) { + cris_free_dma(8, NULL); + free_irq(24, &port[0]); + free_irq(25, &port[0]); + printk(KERN_CRIT "Can't alloc " + "sync serial port 1 " + "RX DMA channel"); + goto out; + } +#endif + RESET_DMA(8); WAIT_DMA(8); + RESET_DMA(9); WAIT_DMA(9); + *R_DMA_CH8_CLR_INTR = + IO_STATE(R_DMA_CH8_CLR_INTR, clr_eop, + do) | + IO_STATE(R_DMA_CH8_CLR_INTR, clr_descr, + do); + *R_DMA_CH9_CLR_INTR = + IO_STATE(R_DMA_CH9_CLR_INTR, clr_eop, + do) | + IO_STATE(R_DMA_CH9_CLR_INTR, clr_descr, + do); + *R_IRQ_MASK2_SET = + IO_STATE(R_IRQ_MASK2_SET, dma8_eop, + set) | + IO_STATE(R_IRQ_MASK2_SET, dma9_descr, + set); + } else if (port == &ports[1]) { +#ifdef SYNC_SER_DMA + if (request_irq(20, tr_interrupt, 0, + "synchronous serial 3 dma tr", + &ports[1])) { + printk(KERN_CRIT "Can't alloc " + "sync serial port 3 IRQ"); + goto out; + } else if (request_irq(21, rx_interrupt, 0, + "synchronous serial 3 dma rx", + &ports[1])) { + free_irq(20, &ports[1]); + printk(KERN_CRIT "Can't alloc " + "sync serial port 3 IRQ"); + goto out; + } else if (cris_request_dma(4, + "synchronous serial 3 dma tr", + DMA_VERBOSE_ON_ERROR, + dma_ser3)) { + free_irq(21, &ports[1]); + free_irq(20, &ports[1]); + printk(KERN_CRIT "Can't alloc " + "sync serial port 3 " + "TX DMA channel"); + goto out; + } else if (cris_request_dma(5, + "synchronous serial 3 dma rec", + DMA_VERBOSE_ON_ERROR, + dma_ser3)) { + cris_free_dma(4, NULL); + free_irq(21, &ports[1]); + free_irq(20, &ports[1]); + printk(KERN_CRIT "Can't alloc " + "sync serial port 3 " + "RX DMA channel"); + goto out; + } +#endif + RESET_DMA(4); WAIT_DMA(4); + RESET_DMA(5); WAIT_DMA(5); + *R_DMA_CH4_CLR_INTR = + IO_STATE(R_DMA_CH4_CLR_INTR, clr_eop, + do) | + IO_STATE(R_DMA_CH4_CLR_INTR, clr_descr, + do); + *R_DMA_CH5_CLR_INTR = + IO_STATE(R_DMA_CH5_CLR_INTR, clr_eop, + do) | + IO_STATE(R_DMA_CH5_CLR_INTR, clr_descr, + do); + *R_IRQ_MASK2_SET = + IO_STATE(R_IRQ_MASK2_SET, dma4_eop, + set) | + IO_STATE(R_IRQ_MASK2_SET, dma5_descr, + set); + } + start_dma_in(port); + port->init_irqs = 0; + } else { /* !port->use_dma */ +#ifdef SYNC_SER_MANUAL + if (port == &ports[0]) { + if (request_irq(8, + manual_interrupt, + IRQF_SHARED, + "synchronous serial manual irq", + &ports[0])) { + printk(KERN_CRIT "Can't alloc " + "sync serial manual irq"); + goto out; + } + } else if (port == &ports[1]) { + if (request_irq(8, + manual_interrupt, + IRQF_SHARED, + "synchronous serial manual irq", + &ports[1])) { + printk(KERN_CRIT "Can't alloc " + "sync serial manual irq"); + goto out; + } + } + port->init_irqs = 0; +#else + panic("sync_serial: Manual mode not supported.\n"); +#endif /* SYNC_SER_MANUAL */ + } + } /* port->init_irqs */ + + port->busy++; + /* Start port if we use it as input */ + mode = IO_EXTRACT(R_SYNC_SERIAL1_CTRL, mode, port->ctrl_data_shadow); + if (mode == IO_STATE_VALUE(R_SYNC_SERIAL1_CTRL, mode, master_input) || + mode == IO_STATE_VALUE(R_SYNC_SERIAL1_CTRL, mode, slave_input) || + mode == IO_STATE_VALUE(R_SYNC_SERIAL1_CTRL, mode, master_bidir) || + mode == IO_STATE_VALUE(R_SYNC_SERIAL1_CTRL, mode, slave_bidir)) { + SETS(port->ctrl_data_shadow, R_SYNC_SERIAL1_CTRL, clk_halt, + running); + SETS(port->ctrl_data_shadow, R_SYNC_SERIAL1_CTRL, tr_enable, + enable); + SETS(port->ctrl_data_shadow, R_SYNC_SERIAL1_CTRL, rec_enable, + enable); + port->started = 1; + *port->ctrl_data = port->ctrl_data_shadow; + if (!port->use_dma) + *R_IRQ_MASK1_SET = 1 << port->data_avail_bit; + DEBUG(printk(KERN_DEBUG "sser%d rec started\n", dev)); + } + err = 0; + +out: + mutex_unlock(&sync_serial_mutex); + return err; +} + +static int sync_serial_release(struct inode *inode, struct file *file) +{ + int dev = MINOR(inode->i_rdev); + struct sync_port *port; + + if (dev < 0 || dev >= NUMBER_OF_PORTS || !ports[dev].enabled) { + DEBUG(printk(KERN_DEBUG "Invalid minor %d\n", dev)); + return -ENODEV; + } + port = &ports[dev]; + if (port->busy) + port->busy--; + if (!port->busy) + *R_IRQ_MASK1_CLR = ((1 << port->data_avail_bit) | + (1 << port->transmitter_ready_bit)); + + return 0; +} + + + +static unsigned int sync_serial_poll(struct file *file, poll_table *wait) +{ + int dev = MINOR(file_inode(file)->i_rdev); + unsigned int mask = 0; + struct sync_port *port; + DEBUGPOLL(static unsigned int prev_mask = 0); + + port = &ports[dev]; + poll_wait(file, &port->out_wait_q, wait); + poll_wait(file, &port->in_wait_q, wait); + /* Some room to write */ + if (port->out_count < OUT_BUFFER_SIZE) + mask |= POLLOUT | POLLWRNORM; + /* At least an inbufchunk of data */ + if (sync_data_avail(port) >= port->inbufchunk) + mask |= POLLIN | POLLRDNORM; + + DEBUGPOLL(if (mask != prev_mask) + printk(KERN_DEBUG "sync_serial_poll: mask 0x%08X %s %s\n", + mask, + mask & POLLOUT ? "POLLOUT" : "", + mask & POLLIN ? "POLLIN" : ""); + prev_mask = mask; + ); + return mask; +} + +static int sync_serial_ioctl_unlocked(struct file *file, + unsigned int cmd, unsigned long arg) +{ + int return_val = 0; + unsigned long flags; + + int dev = MINOR(file_inode(file)->i_rdev); + struct sync_port *port; + + if (dev < 0 || dev >= NUMBER_OF_PORTS || !ports[dev].enabled) { + DEBUG(printk(KERN_DEBUG "Invalid minor %d\n", dev)); + return -1; + } + port = &ports[dev]; + + local_irq_save(flags); + /* Disable port while changing config */ + if (dev) { + if (port->use_dma) { + RESET_DMA(4); WAIT_DMA(4); + port->tr_running = 0; + port->out_count = 0; + port->outp = port->out_buffer; + *R_DMA_CH4_CLR_INTR = + IO_STATE(R_DMA_CH4_CLR_INTR, clr_eop, do) | + IO_STATE(R_DMA_CH4_CLR_INTR, clr_descr, do); + } + SETS(gen_config_ii_shadow, R_GEN_CONFIG_II, sermode3, async); + } else { + if (port->use_dma) { + RESET_DMA(8); WAIT_DMA(8); + port->tr_running = 0; + port->out_count = 0; + port->outp = port->out_buffer; + *R_DMA_CH8_CLR_INTR = + IO_STATE(R_DMA_CH8_CLR_INTR, clr_eop, do) | + IO_STATE(R_DMA_CH8_CLR_INTR, clr_descr, do); + } + SETS(gen_config_ii_shadow, R_GEN_CONFIG_II, sermode1, async); + } + *R_GEN_CONFIG_II = gen_config_ii_shadow; + local_irq_restore(flags); + + switch (cmd) { + case SSP_SPEED: + if (GET_SPEED(arg) == CODEC) { + if (dev) + SETS(sync_serial_prescale_shadow, + R_SYNC_SERIAL_PRESCALE, clk_sel_u3, + codec); + else + SETS(sync_serial_prescale_shadow, + R_SYNC_SERIAL_PRESCALE, clk_sel_u1, + codec); + + SETF(sync_serial_prescale_shadow, + R_SYNC_SERIAL_PRESCALE, prescaler, + GET_FREQ(arg)); + SETF(sync_serial_prescale_shadow, + R_SYNC_SERIAL_PRESCALE, frame_rate, + GET_FRAME_RATE(arg)); + SETF(sync_serial_prescale_shadow, + R_SYNC_SERIAL_PRESCALE, word_rate, + GET_WORD_RATE(arg)); + } else { + SETF(port->ctrl_data_shadow, R_SYNC_SERIAL1_CTRL, + tr_baud, GET_SPEED(arg)); + if (dev) + SETS(sync_serial_prescale_shadow, + R_SYNC_SERIAL_PRESCALE, clk_sel_u3, + baudrate); + else + SETS(sync_serial_prescale_shadow, + R_SYNC_SERIAL_PRESCALE, clk_sel_u1, + baudrate); + } + break; + case SSP_MODE: + if (arg > 5) + return -EINVAL; + if (arg == MASTER_OUTPUT || arg == SLAVE_OUTPUT) + *R_IRQ_MASK1_CLR = 1 << port->data_avail_bit; + else if (!port->use_dma) + *R_IRQ_MASK1_SET = 1 << port->data_avail_bit; + SETF(port->ctrl_data_shadow, R_SYNC_SERIAL1_CTRL, mode, arg); + break; + case SSP_FRAME_SYNC: + if (arg & NORMAL_SYNC) + SETS(port->ctrl_data_shadow, R_SYNC_SERIAL1_CTRL, + f_synctype, normal); + else if (arg & EARLY_SYNC) + SETS(port->ctrl_data_shadow, R_SYNC_SERIAL1_CTRL, + f_synctype, early); + + if (arg & BIT_SYNC) + SETS(port->ctrl_data_shadow, R_SYNC_SERIAL1_CTRL, + f_syncsize, bit); + else if (arg & WORD_SYNC) + SETS(port->ctrl_data_shadow, R_SYNC_SERIAL1_CTRL, + f_syncsize, word); + else if (arg & EXTENDED_SYNC) + SETS(port->ctrl_data_shadow, R_SYNC_SERIAL1_CTRL, + f_syncsize, extended); + + if (arg & SYNC_ON) + SETS(port->ctrl_data_shadow, R_SYNC_SERIAL1_CTRL, + f_sync, on); + else if (arg & SYNC_OFF) + SETS(port->ctrl_data_shadow, R_SYNC_SERIAL1_CTRL, + f_sync, off); + + if (arg & WORD_SIZE_8) + SETS(port->ctrl_data_shadow, R_SYNC_SERIAL1_CTRL, + wordsize, size8bit); + else if (arg & WORD_SIZE_12) + SETS(port->ctrl_data_shadow, R_SYNC_SERIAL1_CTRL, + wordsize, size12bit); + else if (arg & WORD_SIZE_16) + SETS(port->ctrl_data_shadow, R_SYNC_SERIAL1_CTRL, + wordsize, size16bit); + else if (arg & WORD_SIZE_24) + SETS(port->ctrl_data_shadow, R_SYNC_SERIAL1_CTRL, + wordsize, size24bit); + else if (arg & WORD_SIZE_32) + SETS(port->ctrl_data_shadow, R_SYNC_SERIAL1_CTRL, + wordsize, size32bit); + + if (arg & BIT_ORDER_MSB) + SETS(port->ctrl_data_shadow, R_SYNC_SERIAL1_CTRL, + bitorder, msb); + else if (arg & BIT_ORDER_LSB) + SETS(port->ctrl_data_shadow, R_SYNC_SERIAL1_CTRL, + bitorder, lsb); + + if (arg & FLOW_CONTROL_ENABLE) + SETS(port->ctrl_data_shadow, R_SYNC_SERIAL1_CTRL, + flow_ctrl, enabled); + else if (arg & FLOW_CONTROL_DISABLE) + SETS(port->ctrl_data_shadow, R_SYNC_SERIAL1_CTRL, + flow_ctrl, disabled); + + if (arg & CLOCK_NOT_GATED) + SETS(port->ctrl_data_shadow, R_SYNC_SERIAL1_CTRL, + clk_mode, normal); + else if (arg & CLOCK_GATED) + SETS(port->ctrl_data_shadow, R_SYNC_SERIAL1_CTRL, + clk_mode, gated); + + break; + case SSP_IPOLARITY: + /* NOTE!! negedge is considered NORMAL */ + if (arg & CLOCK_NORMAL) + SETS(port->ctrl_data_shadow, R_SYNC_SERIAL1_CTRL, + clk_polarity, neg); + else if (arg & CLOCK_INVERT) + SETS(port->ctrl_data_shadow, R_SYNC_SERIAL1_CTRL, + clk_polarity, pos); + + if (arg & FRAME_NORMAL) + SETS(port->ctrl_data_shadow, R_SYNC_SERIAL1_CTRL, + frame_polarity, normal); + else if (arg & FRAME_INVERT) + SETS(port->ctrl_data_shadow, R_SYNC_SERIAL1_CTRL, + frame_polarity, inverted); + + if (arg & STATUS_NORMAL) + SETS(port->ctrl_data_shadow, R_SYNC_SERIAL1_CTRL, + status_polarity, normal); + else if (arg & STATUS_INVERT) + SETS(port->ctrl_data_shadow, R_SYNC_SERIAL1_CTRL, + status_polarity, inverted); + break; + case SSP_OPOLARITY: + if (arg & CLOCK_NORMAL) + SETS(port->ctrl_data_shadow, R_SYNC_SERIAL1_CTRL, + clk_driver, normal); + else if (arg & CLOCK_INVERT) + SETS(port->ctrl_data_shadow, R_SYNC_SERIAL1_CTRL, + clk_driver, inverted); + + if (arg & FRAME_NORMAL) + SETS(port->ctrl_data_shadow, R_SYNC_SERIAL1_CTRL, + frame_driver, normal); + else if (arg & FRAME_INVERT) + SETS(port->ctrl_data_shadow, R_SYNC_SERIAL1_CTRL, + frame_driver, inverted); + + if (arg & STATUS_NORMAL) + SETS(port->ctrl_data_shadow, R_SYNC_SERIAL1_CTRL, + status_driver, normal); + else if (arg & STATUS_INVERT) + SETS(port->ctrl_data_shadow, R_SYNC_SERIAL1_CTRL, + status_driver, inverted); + break; + case SSP_SPI: + SETS(port->ctrl_data_shadow, R_SYNC_SERIAL1_CTRL, flow_ctrl, + disabled); + SETS(port->ctrl_data_shadow, R_SYNC_SERIAL1_CTRL, bitorder, + msb); + SETS(port->ctrl_data_shadow, R_SYNC_SERIAL1_CTRL, wordsize, + size8bit); + SETS(port->ctrl_data_shadow, R_SYNC_SERIAL1_CTRL, f_sync, on); + SETS(port->ctrl_data_shadow, R_SYNC_SERIAL1_CTRL, f_syncsize, + word); + SETS(port->ctrl_data_shadow, R_SYNC_SERIAL1_CTRL, f_synctype, + normal); + if (arg & SPI_SLAVE) { + SETS(port->ctrl_data_shadow, R_SYNC_SERIAL1_CTRL, + frame_polarity, inverted); + SETS(port->ctrl_data_shadow, R_SYNC_SERIAL1_CTRL, + clk_polarity, neg); + SETF(port->ctrl_data_shadow, R_SYNC_SERIAL1_CTRL, + mode, SLAVE_INPUT); + } else { + SETS(port->ctrl_data_shadow, R_SYNC_SERIAL1_CTRL, + frame_driver, inverted); + SETS(port->ctrl_data_shadow, R_SYNC_SERIAL1_CTRL, + clk_driver, inverted); + SETF(port->ctrl_data_shadow, R_SYNC_SERIAL1_CTRL, + mode, MASTER_OUTPUT); + } + break; + case SSP_INBUFCHUNK: +#if 0 + if (arg > port->in_buffer_size/NUM_IN_DESCR) + return -EINVAL; + port->inbufchunk = arg; + /* Make sure in_buffer_size is a multiple of inbufchunk */ + port->in_buffer_size = + (port->in_buffer_size/port->inbufchunk) * + port->inbufchunk; + DEBUG(printk(KERN_DEBUG "inbufchunk %i in_buffer_size: %i\n", + port->inbufchunk, port->in_buffer_size)); + if (port->use_dma) { + if (port->port_nbr == 0) { + RESET_DMA(9); + WAIT_DMA(9); + } else { + RESET_DMA(5); + WAIT_DMA(5); + } + start_dma_in(port); + } +#endif + break; + default: + return_val = -1; + } + /* Make sure we write the config without interruption */ + local_irq_save(flags); + /* Set config and enable port */ + *port->ctrl_data = port->ctrl_data_shadow; + nop(); nop(); nop(); nop(); + *R_SYNC_SERIAL_PRESCALE = sync_serial_prescale_shadow; + nop(); nop(); nop(); nop(); + if (dev) + SETS(gen_config_ii_shadow, R_GEN_CONFIG_II, sermode3, sync); + else + SETS(gen_config_ii_shadow, R_GEN_CONFIG_II, sermode1, sync); + + *R_GEN_CONFIG_II = gen_config_ii_shadow; + /* Reset DMA. At readout from serial port the data could be shifted + * one byte if not resetting DMA. + */ + if (port->use_dma) { + if (port->port_nbr == 0) { + RESET_DMA(9); + WAIT_DMA(9); + } else { + RESET_DMA(5); + WAIT_DMA(5); + } + start_dma_in(port); + } + local_irq_restore(flags); + return return_val; +} + +static long sync_serial_ioctl(struct file *file, + unsigned int cmd, unsigned long arg) +{ + long ret; + + mutex_lock(&sync_serial_mutex); + ret = sync_serial_ioctl_unlocked(file, cmd, arg); + mutex_unlock(&sync_serial_mutex); + + return ret; +} + + +static ssize_t sync_serial_write(struct file *file, const char *buf, + size_t count, loff_t *ppos) +{ + int dev = MINOR(file_inode(file)->i_rdev); + DECLARE_WAITQUEUE(wait, current); + struct sync_port *port; + unsigned long flags; + unsigned long c, c1; + unsigned long free_outp; + unsigned long outp; + unsigned long out_buffer; + + if (dev < 0 || dev >= NUMBER_OF_PORTS || !ports[dev].enabled) { + DEBUG(printk(KERN_DEBUG "Invalid minor %d\n", dev)); + return -ENODEV; + } + port = &ports[dev]; + + DEBUGWRITE(printk(KERN_DEBUG "W d%d c %lu (%d/%d)\n", + port->port_nbr, count, port->out_count, OUT_BUFFER_SIZE)); + /* Space to end of buffer */ + /* + * out_buffer <c1>012345<- c ->OUT_BUFFER_SIZE + * outp^ +out_count + * ^free_outp + * out_buffer 45<- c ->0123OUT_BUFFER_SIZE + * +out_count outp^ + * free_outp + * + */ + + /* Read variables that may be updated by interrupts */ + local_irq_save(flags); + if (count > OUT_BUFFER_SIZE - port->out_count) + count = OUT_BUFFER_SIZE - port->out_count; + + outp = (unsigned long)port->outp; + free_outp = outp + port->out_count; + local_irq_restore(flags); + out_buffer = (unsigned long)port->out_buffer; + + /* Find out where and how much to write */ + if (free_outp >= out_buffer + OUT_BUFFER_SIZE) + free_outp -= OUT_BUFFER_SIZE; + if (free_outp >= outp) + c = out_buffer + OUT_BUFFER_SIZE - free_outp; + else + c = outp - free_outp; + if (c > count) + c = count; + + DEBUGWRITE(printk(KERN_DEBUG "w op %08lX fop %08lX c %lu\n", + outp, free_outp, c)); + if (copy_from_user((void *)free_outp, buf, c)) + return -EFAULT; + + if (c != count) { + buf += c; + c1 = count - c; + DEBUGWRITE(printk(KERN_DEBUG "w2 fi %lu c %lu c1 %lu\n", + free_outp-out_buffer, c, c1)); + if (copy_from_user((void *)out_buffer, buf, c1)) + return -EFAULT; + } + local_irq_save(flags); + port->out_count += count; + local_irq_restore(flags); + + /* Make sure transmitter/receiver is running */ + if (!port->started) { + SETS(port->ctrl_data_shadow, R_SYNC_SERIAL1_CTRL, clk_halt, + running); + SETS(port->ctrl_data_shadow, R_SYNC_SERIAL1_CTRL, tr_enable, + enable); + SETS(port->ctrl_data_shadow, R_SYNC_SERIAL1_CTRL, rec_enable, + enable); + port->started = 1; + } + + *port->ctrl_data = port->ctrl_data_shadow; + + if (file->f_flags & O_NONBLOCK) { + local_irq_save(flags); + if (!port->tr_running) { + if (!port->use_dma) { + /* Start sender by writing data */ + send_word(port); + /* and enable transmitter ready IRQ */ + *R_IRQ_MASK1_SET = 1 << + port->transmitter_ready_bit; + } else + start_dma(port, + (unsigned char *volatile)port->outp, c); + } + local_irq_restore(flags); + DEBUGWRITE(printk(KERN_DEBUG "w d%d c %lu NB\n", + port->port_nbr, count)); + return count; + } + + /* Sleep until all sent */ + add_wait_queue(&port->out_wait_q, &wait); + set_current_state(TASK_INTERRUPTIBLE); + local_irq_save(flags); + if (!port->tr_running) { + if (!port->use_dma) { + /* Start sender by writing data */ + send_word(port); + /* and enable transmitter ready IRQ */ + *R_IRQ_MASK1_SET = 1 << port->transmitter_ready_bit; + } else + start_dma(port, port->outp, c); + } + local_irq_restore(flags); + schedule(); + remove_wait_queue(&port->out_wait_q, &wait); + if (signal_pending(current)) + return -EINTR; + + DEBUGWRITE(printk(KERN_DEBUG "w d%d c %lu\n", port->port_nbr, count)); + return count; +} + +static ssize_t sync_serial_read(struct file *file, char *buf, + size_t count, loff_t *ppos) +{ + int dev = MINOR(file_inode(file)->i_rdev); + int avail; + struct sync_port *port; + unsigned char *start; + unsigned char *end; + unsigned long flags; + + if (dev < 0 || dev >= NUMBER_OF_PORTS || !ports[dev].enabled) { + DEBUG(printk(KERN_DEBUG "Invalid minor %d\n", dev)); + return -ENODEV; + } + port = &ports[dev]; + + DEBUGREAD(printk(KERN_DEBUG "R%d c %d ri %lu wi %lu /%lu\n", + dev, count, port->readp - port->flip, + port->writep - port->flip, port->in_buffer_size)); + + if (!port->started) { + SETS(port->ctrl_data_shadow, R_SYNC_SERIAL1_CTRL, clk_halt, + running); + SETS(port->ctrl_data_shadow, R_SYNC_SERIAL1_CTRL, tr_enable, + enable); + SETS(port->ctrl_data_shadow, R_SYNC_SERIAL1_CTRL, rec_enable, + enable); + port->started = 1; + } + *port->ctrl_data = port->ctrl_data_shadow; + + /* Calculate number of available bytes */ + /* Save pointers to avoid that they are modified by interrupt */ + local_irq_save(flags); + start = (unsigned char *)port->readp; /* cast away volatile */ + end = (unsigned char *)port->writep; /* cast away volatile */ + local_irq_restore(flags); + while (start == end && !port->full) { + /* No data */ + if (file->f_flags & O_NONBLOCK) + return -EAGAIN; + + wait_event_interruptible(port->in_wait_q, + !(start == end && !port->full)); + if (signal_pending(current)) + return -EINTR; + + local_irq_save(flags); + start = (unsigned char *)port->readp; /* cast away volatile */ + end = (unsigned char *)port->writep; /* cast away volatile */ + local_irq_restore(flags); + } + + /* Lazy read, never return wrapped data. */ + if (port->full) + avail = port->in_buffer_size; + else if (end > start) + avail = end - start; + else + avail = port->flip + port->in_buffer_size - start; + + count = count > avail ? avail : count; + if (copy_to_user(buf, start, count)) + return -EFAULT; + /* Disable interrupts while updating readp */ + local_irq_save(flags); + port->readp += count; + if (port->readp >= port->flip + port->in_buffer_size) /* Wrap? */ + port->readp = port->flip; + port->full = 0; + local_irq_restore(flags); + DEBUGREAD(printk(KERN_DEBUG "r %d\n", count)); + return count; +} + +static void send_word(struct sync_port *port) +{ + switch (IO_EXTRACT(R_SYNC_SERIAL1_CTRL, wordsize, + port->ctrl_data_shadow)) { + case IO_STATE_VALUE(R_SYNC_SERIAL1_CTRL, wordsize, size8bit): + port->out_count--; + *port->data_out = *port->outp++; + if (port->outp >= port->out_buffer + OUT_BUFFER_SIZE) + port->outp = port->out_buffer; + break; + case IO_STATE_VALUE(R_SYNC_SERIAL1_CTRL, wordsize, size12bit): + { + int data = (*port->outp++) << 8; + data |= *port->outp++; + port->out_count -= 2; + *port->data_out = data; + if (port->outp >= port->out_buffer + OUT_BUFFER_SIZE) + port->outp = port->out_buffer; + break; + } + case IO_STATE_VALUE(R_SYNC_SERIAL1_CTRL, wordsize, size16bit): + port->out_count -= 2; + *port->data_out = *(unsigned short *)port->outp; + port->outp += 2; + if (port->outp >= port->out_buffer + OUT_BUFFER_SIZE) + port->outp = port->out_buffer; + break; + case IO_STATE_VALUE(R_SYNC_SERIAL1_CTRL, wordsize, size24bit): + port->out_count -= 3; + *port->data_out = *(unsigned int *)port->outp; + port->outp += 3; + if (port->outp >= port->out_buffer + OUT_BUFFER_SIZE) + port->outp = port->out_buffer; + break; + case IO_STATE_VALUE(R_SYNC_SERIAL1_CTRL, wordsize, size32bit): + port->out_count -= 4; + *port->data_out = *(unsigned int *)port->outp; + port->outp += 4; + if (port->outp >= port->out_buffer + OUT_BUFFER_SIZE) + port->outp = port->out_buffer; + break; + } +} + + +static void start_dma(struct sync_port *port, const char *data, int count) +{ + port->tr_running = 1; + port->out_descr.hw_len = 0; + port->out_descr.next = 0; + port->out_descr.ctrl = d_eol | d_eop; /* No d_wait to avoid glitches */ + port->out_descr.sw_len = count; + port->out_descr.buf = virt_to_phys(data); + port->out_descr.status = 0; + + *port->output_dma_first = virt_to_phys(&port->out_descr); + *port->output_dma_cmd = IO_STATE(R_DMA_CH0_CMD, cmd, start); + DEBUGTXINT(printk(KERN_DEBUG "dma %08lX c %d\n", + (unsigned long)data, count)); +} + +static void start_dma_in(struct sync_port *port) +{ + int i; + unsigned long buf; + port->writep = port->flip; + + if (port->writep > port->flip + port->in_buffer_size) { + panic("Offset too large in sync serial driver\n"); + return; + } + buf = virt_to_phys(port->in_buffer); + for (i = 0; i < NUM_IN_DESCR; i++) { + port->in_descr[i].sw_len = port->inbufchunk; + port->in_descr[i].ctrl = d_int; + port->in_descr[i].next = virt_to_phys(&port->in_descr[i+1]); + port->in_descr[i].buf = buf; + port->in_descr[i].hw_len = 0; + port->in_descr[i].status = 0; + port->in_descr[i].fifo_len = 0; + buf += port->inbufchunk; + prepare_rx_descriptor(&port->in_descr[i]); + } + /* Link the last descriptor to the first */ + port->in_descr[i-1].next = virt_to_phys(&port->in_descr[0]); + port->in_descr[i-1].ctrl |= d_eol; + port->next_rx_desc = &port->in_descr[0]; + port->prev_rx_desc = &port->in_descr[NUM_IN_DESCR - 1]; + *port->input_dma_first = virt_to_phys(port->next_rx_desc); + *port->input_dma_cmd = IO_STATE(R_DMA_CH0_CMD, cmd, start); +} + +#ifdef SYNC_SER_DMA +static irqreturn_t tr_interrupt(int irq, void *dev_id) +{ + unsigned long ireg = *R_IRQ_MASK2_RD; + struct etrax_dma_descr *descr; + unsigned int sentl; + int handled = 0; + int i; + + for (i = 0; i < NUMBER_OF_PORTS; i++) { + struct sync_port *port = &ports[i]; + if (!port->enabled || !port->use_dma) + continue; + + /* IRQ active for the port? */ + if (!(ireg & (1 << port->output_dma_bit))) + continue; + + handled = 1; + + /* Clear IRQ */ + *port->output_dma_clr_irq = + IO_STATE(R_DMA_CH0_CLR_INTR, clr_eop, do) | + IO_STATE(R_DMA_CH0_CLR_INTR, clr_descr, do); + + descr = &port->out_descr; + if (!(descr->status & d_stop)) + sentl = descr->sw_len; + else + /* Otherwise find amount of data sent here */ + sentl = descr->hw_len; + + port->out_count -= sentl; + port->outp += sentl; + if (port->outp >= port->out_buffer + OUT_BUFFER_SIZE) + port->outp = port->out_buffer; + if (port->out_count) { + int c = port->out_buffer + OUT_BUFFER_SIZE - port->outp; + if (c > port->out_count) + c = port->out_count; + DEBUGTXINT(printk(KERN_DEBUG + "tx_int DMAWRITE %i %i\n", sentl, c)); + start_dma(port, port->outp, c); + } else { + DEBUGTXINT(printk(KERN_DEBUG + "tx_int DMA stop %i\n", sentl)); + port->tr_running = 0; + } + /* wake up the waiting process */ + wake_up_interruptible(&port->out_wait_q); + } + return IRQ_RETVAL(handled); +} /* tr_interrupt */ + +static irqreturn_t rx_interrupt(int irq, void *dev_id) +{ + unsigned long ireg = *R_IRQ_MASK2_RD; + int i; + int handled = 0; + + for (i = 0; i < NUMBER_OF_PORTS; i++) { + struct sync_port *port = &ports[i]; + + if (!port->enabled || !port->use_dma) + continue; + + if (!(ireg & (1 << port->input_dma_descr_bit))) + continue; + + /* Descriptor interrupt */ + handled = 1; + while (*port->input_dma_descr != + virt_to_phys(port->next_rx_desc)) { + if (port->writep + port->inbufchunk > port->flip + + port->in_buffer_size) { + int first_size = port->flip + + port->in_buffer_size - port->writep; + memcpy(port->writep, + phys_to_virt(port->next_rx_desc->buf), + first_size); + memcpy(port->flip, + phys_to_virt(port->next_rx_desc->buf + + first_size), + port->inbufchunk - first_size); + port->writep = port->flip + + port->inbufchunk - first_size; + } else { + memcpy(port->writep, + phys_to_virt(port->next_rx_desc->buf), + port->inbufchunk); + port->writep += port->inbufchunk; + if (port->writep >= port->flip + + port->in_buffer_size) + port->writep = port->flip; + } + if (port->writep == port->readp) + port->full = 1; + prepare_rx_descriptor(port->next_rx_desc); + port->next_rx_desc->ctrl |= d_eol; + port->prev_rx_desc->ctrl &= ~d_eol; + port->prev_rx_desc = phys_to_virt((unsigned) + port->next_rx_desc); + port->next_rx_desc = phys_to_virt((unsigned) + port->next_rx_desc->next); + /* Wake up the waiting process */ + wake_up_interruptible(&port->in_wait_q); + *port->input_dma_cmd = IO_STATE(R_DMA_CH1_CMD, + cmd, restart); + /* DMA has reached end of descriptor */ + *port->input_dma_clr_irq = IO_STATE(R_DMA_CH0_CLR_INTR, + clr_descr, do); + } + } + return IRQ_RETVAL(handled); +} /* rx_interrupt */ +#endif /* SYNC_SER_DMA */ + +#ifdef SYNC_SER_MANUAL +static irqreturn_t manual_interrupt(int irq, void *dev_id) +{ + int i; + int handled = 0; + + for (i = 0; i < NUMBER_OF_PORTS; i++) { + struct sync_port *port = &ports[i]; + + if (!port->enabled || port->use_dma) + continue; + + /* Data received? */ + if (*R_IRQ_MASK1_RD & (1 << port->data_avail_bit)) { + handled = 1; + /* Read data */ + switch (port->ctrl_data_shadow & + IO_MASK(R_SYNC_SERIAL1_CTRL, wordsize)) { + case IO_STATE(R_SYNC_SERIAL1_CTRL, wordsize, size8bit): + *port->writep++ = + *(volatile char *)port->data_in; + break; + case IO_STATE(R_SYNC_SERIAL1_CTRL, wordsize, size12bit): + { + int data = *(unsigned short *)port->data_in; + *port->writep = (data & 0x0ff0) >> 4; + *(port->writep + 1) = data & 0x0f; + port->writep += 2; + break; + } + case IO_STATE(R_SYNC_SERIAL1_CTRL, wordsize, size16bit): + *(unsigned short *)port->writep = + *(volatile unsigned short *)port->data_in; + port->writep += 2; + break; + case IO_STATE(R_SYNC_SERIAL1_CTRL, wordsize, size24bit): + *(unsigned int *)port->writep = *port->data_in; + port->writep += 3; + break; + case IO_STATE(R_SYNC_SERIAL1_CTRL, wordsize, size32bit): + *(unsigned int *)port->writep = *port->data_in; + port->writep += 4; + break; + } + + /* Wrap? */ + if (port->writep >= port->flip + port->in_buffer_size) + port->writep = port->flip; + if (port->writep == port->readp) { + /* Receive buffer overrun, discard oldest */ + port->readp++; + /* Wrap? */ + if (port->readp >= port->flip + + port->in_buffer_size) + port->readp = port->flip; + } + if (sync_data_avail(port) >= port->inbufchunk) { + /* Wake up application */ + wake_up_interruptible(&port->in_wait_q); + } + } + + /* Transmitter ready? */ + if (*R_IRQ_MASK1_RD & (1 << port->transmitter_ready_bit)) { + if (port->out_count > 0) { + /* More data to send */ + send_word(port); + } else { + /* Transmission finished */ + /* Turn off IRQ */ + *R_IRQ_MASK1_CLR = 1 << + port->transmitter_ready_bit; + /* Wake up application */ + wake_up_interruptible(&port->out_wait_q); + } + } + } + return IRQ_RETVAL(handled); +} +#endif + +module_init(etrax_sync_serial_init); diff --git a/kernel/arch/cris/arch-v10/kernel/Makefile b/kernel/arch/cris/arch-v10/kernel/Makefile new file mode 100644 index 000000000..4841e822c --- /dev/null +++ b/kernel/arch/cris/arch-v10/kernel/Makefile @@ -0,0 +1,17 @@ +# +# Makefile for the linux kernel. +# + +extra-y := head.o + + +obj-y := entry.o traps.o shadows.o debugport.o irq.o \ + process.o setup.o signal.o traps.o time.o ptrace.o \ + dma.o io_interface_mux.o + +obj-$(CONFIG_ETRAX_KGDB) += kgdb.o +obj-$(CONFIG_ETRAX_FAST_TIMER) += fasttimer.o +obj-$(CONFIG_MODULES) += crisksyms.o + +clean: + diff --git a/kernel/arch/cris/arch-v10/kernel/crisksyms.c b/kernel/arch/cris/arch-v10/kernel/crisksyms.c new file mode 100644 index 000000000..1ca6fc283 --- /dev/null +++ b/kernel/arch/cris/arch-v10/kernel/crisksyms.c @@ -0,0 +1,16 @@ +#include <linux/module.h> +#include <asm/io.h> +#include <arch/svinto.h> + +/* Export shadow registers for the CPU I/O pins */ +EXPORT_SYMBOL(genconfig_shadow); +EXPORT_SYMBOL(port_pa_data_shadow); +EXPORT_SYMBOL(port_pa_dir_shadow); +EXPORT_SYMBOL(port_pb_data_shadow); +EXPORT_SYMBOL(port_pb_dir_shadow); +EXPORT_SYMBOL(port_pb_config_shadow); +EXPORT_SYMBOL(port_g_data_shadow); + +/* Cache flush functions */ +EXPORT_SYMBOL(flush_etrax_cache); +EXPORT_SYMBOL(prepare_rx_descriptor); diff --git a/kernel/arch/cris/arch-v10/kernel/debugport.c b/kernel/arch/cris/arch-v10/kernel/debugport.c new file mode 100644 index 000000000..7d307cce8 --- /dev/null +++ b/kernel/arch/cris/arch-v10/kernel/debugport.c @@ -0,0 +1,559 @@ +/* Serialport functions for debugging + * + * Copyright (c) 2000-2007 Axis Communications AB + * + * Authors: Bjorn Wesen + * + * Exports: + * console_print_etrax(char *buf) + * int getDebugChar() + * putDebugChar(int) + * enableDebugIRQ() + * init_etrax_debug() + * + */ + +#include <linux/console.h> +#include <linux/init.h> +#include <linux/major.h> +#include <linux/delay.h> +#include <linux/tty.h> +#include <arch/svinto.h> + +extern void reset_watchdog(void); + +struct dbg_port +{ + unsigned int index; + const volatile unsigned* read; + volatile char* write; + volatile unsigned* xoff; + volatile char* baud; + volatile char* tr_ctrl; + volatile char* rec_ctrl; + unsigned long irq; + unsigned int started; + unsigned long baudrate; + unsigned char parity; + unsigned int bits; +}; + +struct dbg_port ports[]= +{ + { + 0, + R_SERIAL0_READ, + R_SERIAL0_TR_DATA, + R_SERIAL0_XOFF, + R_SERIAL0_BAUD, + R_SERIAL0_TR_CTRL, + R_SERIAL0_REC_CTRL, + IO_STATE(R_IRQ_MASK1_SET, ser0_data, set), + 0, + 115200, + 'N', + 8 + }, + { + 1, + R_SERIAL1_READ, + R_SERIAL1_TR_DATA, + R_SERIAL1_XOFF, + R_SERIAL1_BAUD, + R_SERIAL1_TR_CTRL, + R_SERIAL1_REC_CTRL, + IO_STATE(R_IRQ_MASK1_SET, ser1_data, set), + 0, + 115200, + 'N', + 8 + }, + { + 2, + R_SERIAL2_READ, + R_SERIAL2_TR_DATA, + R_SERIAL2_XOFF, + R_SERIAL2_BAUD, + R_SERIAL2_TR_CTRL, + R_SERIAL2_REC_CTRL, + IO_STATE(R_IRQ_MASK1_SET, ser2_data, set), + 0, + 115200, + 'N', + 8 + }, + { + 3, + R_SERIAL3_READ, + R_SERIAL3_TR_DATA, + R_SERIAL3_XOFF, + R_SERIAL3_BAUD, + R_SERIAL3_TR_CTRL, + R_SERIAL3_REC_CTRL, + IO_STATE(R_IRQ_MASK1_SET, ser3_data, set), + 0, + 115200, + 'N', + 8 + } +}; + +#ifdef CONFIG_ETRAX_SERIAL +extern struct tty_driver *serial_driver; +#endif + +struct dbg_port* port = +#if defined(CONFIG_ETRAX_DEBUG_PORT0) + &ports[0]; +#elif defined(CONFIG_ETRAX_DEBUG_PORT1) + &ports[1]; +#elif defined(CONFIG_ETRAX_DEBUG_PORT2) + &ports[2]; +#elif defined(CONFIG_ETRAX_DEBUG_PORT3) + &ports[3]; +#else + NULL; +#endif + +static struct dbg_port* kgdb_port = +#if defined(CONFIG_ETRAX_KGDB_PORT0) + &ports[0]; +#elif defined(CONFIG_ETRAX_KGDB_PORT1) + &ports[1]; +#elif defined(CONFIG_ETRAX_KGDB_PORT2) + &ports[2]; +#elif defined(CONFIG_ETRAX_KGDB_PORT3) + &ports[3]; +#else + NULL; +#endif + +static void +start_port(struct dbg_port* p) +{ + unsigned long rec_ctrl = 0; + unsigned long tr_ctrl = 0; + + if (!p) + return; + + if (p->started) + return; + p->started = 1; + + if (p->index == 0) + { + genconfig_shadow &= ~IO_MASK(R_GEN_CONFIG, dma6); + genconfig_shadow |= IO_STATE(R_GEN_CONFIG, dma6, unused); + } + else if (p->index == 1) + { + genconfig_shadow &= ~IO_MASK(R_GEN_CONFIG, dma8); + genconfig_shadow |= IO_STATE(R_GEN_CONFIG, dma8, usb); + } + else if (p->index == 2) + { + genconfig_shadow &= ~IO_MASK(R_GEN_CONFIG, dma2); + genconfig_shadow |= IO_STATE(R_GEN_CONFIG, dma2, par0); + genconfig_shadow &= ~IO_MASK(R_GEN_CONFIG, dma3); + genconfig_shadow |= IO_STATE(R_GEN_CONFIG, dma3, par0); + genconfig_shadow |= IO_STATE(R_GEN_CONFIG, ser2, select); + } + else + { + genconfig_shadow &= ~IO_MASK(R_GEN_CONFIG, dma4); + genconfig_shadow |= IO_STATE(R_GEN_CONFIG, dma4, par1); + genconfig_shadow &= ~IO_MASK(R_GEN_CONFIG, dma5); + genconfig_shadow |= IO_STATE(R_GEN_CONFIG, dma5, par1); + genconfig_shadow |= IO_STATE(R_GEN_CONFIG, ser3, select); + } + + *R_GEN_CONFIG = genconfig_shadow; + + *p->xoff = + IO_STATE(R_SERIAL0_XOFF, tx_stop, enable) | + IO_STATE(R_SERIAL0_XOFF, auto_xoff, disable) | + IO_FIELD(R_SERIAL0_XOFF, xoff_char, 0); + + switch (p->baudrate) + { + case 0: + case 115200: + *p->baud = + IO_STATE(R_SERIAL0_BAUD, tr_baud, c115k2Hz) | + IO_STATE(R_SERIAL0_BAUD, rec_baud, c115k2Hz); + break; + case 1200: + *p->baud = + IO_STATE(R_SERIAL0_BAUD, tr_baud, c1200Hz) | + IO_STATE(R_SERIAL0_BAUD, rec_baud, c1200Hz); + break; + case 2400: + *p->baud = + IO_STATE(R_SERIAL0_BAUD, tr_baud, c2400Hz) | + IO_STATE(R_SERIAL0_BAUD, rec_baud, c2400Hz); + break; + case 4800: + *p->baud = + IO_STATE(R_SERIAL0_BAUD, tr_baud, c4800Hz) | + IO_STATE(R_SERIAL0_BAUD, rec_baud, c4800Hz); + break; + case 9600: + *p->baud = + IO_STATE(R_SERIAL0_BAUD, tr_baud, c9600Hz) | + IO_STATE(R_SERIAL0_BAUD, rec_baud, c9600Hz); + break; + case 19200: + *p->baud = + IO_STATE(R_SERIAL0_BAUD, tr_baud, c19k2Hz) | + IO_STATE(R_SERIAL0_BAUD, rec_baud, c19k2Hz); + break; + case 38400: + *p->baud = + IO_STATE(R_SERIAL0_BAUD, tr_baud, c38k4Hz) | + IO_STATE(R_SERIAL0_BAUD, rec_baud, c38k4Hz); + break; + case 57600: + *p->baud = + IO_STATE(R_SERIAL0_BAUD, tr_baud, c57k6Hz) | + IO_STATE(R_SERIAL0_BAUD, rec_baud, c57k6Hz); + break; + default: + *p->baud = + IO_STATE(R_SERIAL0_BAUD, tr_baud, c115k2Hz) | + IO_STATE(R_SERIAL0_BAUD, rec_baud, c115k2Hz); + break; + } + + if (p->parity == 'E') { + rec_ctrl = + IO_STATE(R_SERIAL0_REC_CTRL, rec_par, even) | + IO_STATE(R_SERIAL0_REC_CTRL, rec_par_en, enable); + tr_ctrl = + IO_STATE(R_SERIAL0_TR_CTRL, tr_par, even) | + IO_STATE(R_SERIAL0_TR_CTRL, tr_par_en, enable); + } else if (p->parity == 'O') { + rec_ctrl = + IO_STATE(R_SERIAL0_REC_CTRL, rec_par, odd) | + IO_STATE(R_SERIAL0_REC_CTRL, rec_par_en, enable); + tr_ctrl = + IO_STATE(R_SERIAL0_TR_CTRL, tr_par, odd) | + IO_STATE(R_SERIAL0_TR_CTRL, tr_par_en, enable); + } else { + rec_ctrl = + IO_STATE(R_SERIAL0_REC_CTRL, rec_par, even) | + IO_STATE(R_SERIAL0_REC_CTRL, rec_par_en, disable); + tr_ctrl = + IO_STATE(R_SERIAL0_TR_CTRL, tr_par, even) | + IO_STATE(R_SERIAL0_TR_CTRL, tr_par_en, disable); + } + if (p->bits == 7) + { + rec_ctrl |= IO_STATE(R_SERIAL0_REC_CTRL, rec_bitnr, rec_7bit); + tr_ctrl |= IO_STATE(R_SERIAL0_TR_CTRL, tr_bitnr, tr_7bit); + } + else + { + rec_ctrl |= IO_STATE(R_SERIAL0_REC_CTRL, rec_bitnr, rec_8bit); + tr_ctrl |= IO_STATE(R_SERIAL0_TR_CTRL, tr_bitnr, tr_8bit); + } + + *p->rec_ctrl = + IO_STATE(R_SERIAL0_REC_CTRL, dma_err, stop) | + IO_STATE(R_SERIAL0_REC_CTRL, rec_enable, enable) | + IO_STATE(R_SERIAL0_REC_CTRL, rts_, active) | + IO_STATE(R_SERIAL0_REC_CTRL, sampling, middle) | + IO_STATE(R_SERIAL0_REC_CTRL, rec_stick_par, normal) | + rec_ctrl; + + *p->tr_ctrl = + IO_FIELD(R_SERIAL0_TR_CTRL, txd, 0) | + IO_STATE(R_SERIAL0_TR_CTRL, tr_enable, enable) | + IO_STATE(R_SERIAL0_TR_CTRL, auto_cts, disabled) | + IO_STATE(R_SERIAL0_TR_CTRL, stop_bits, one_bit) | + IO_STATE(R_SERIAL0_TR_CTRL, tr_stick_par, normal) | + tr_ctrl; +} + +static void +console_write_direct(struct console *co, const char *buf, unsigned int len) +{ + int i; + unsigned long flags; + + if (!port) + return; + + local_irq_save(flags); + + /* Send data */ + for (i = 0; i < len; i++) { + /* LF -> CRLF */ + if (buf[i] == '\n') { + while (!(*port->read & IO_MASK(R_SERIAL0_READ, tr_ready))) + ; + *port->write = '\r'; + } + /* Wait until transmitter is ready and send.*/ + while (!(*port->read & IO_MASK(R_SERIAL0_READ, tr_ready))) + ; + *port->write = buf[i]; + } + + /* + * Feed the watchdog, otherwise it will reset the chip during boot. + * The time to send an ordinary boot message line (10-90 chars) + * varies between 1-8ms at 115200. What makes up for the additional + * 90ms that allows the watchdog to bite? + */ + reset_watchdog(); + + local_irq_restore(flags); +} + +static void +console_write(struct console *co, const char *buf, unsigned int len) +{ + if (!port) + return; + + console_write_direct(co, buf, len); +} + +/* legacy function */ + +void +console_print_etrax(const char *buf) +{ + console_write(NULL, buf, strlen(buf)); +} + +/* Use polling to get a single character FROM the debug port */ + +int +getDebugChar(void) +{ + unsigned long readval; + + if (!kgdb_port) + return 0; + + do { + readval = *kgdb_port->read; + } while (!(readval & IO_MASK(R_SERIAL0_READ, data_avail))); + + return (readval & IO_MASK(R_SERIAL0_READ, data_in)); +} + +/* Use polling to put a single character to the debug port */ + +void +putDebugChar(int val) +{ + if (!kgdb_port) + return; + + while (!(*kgdb_port->read & IO_MASK(R_SERIAL0_READ, tr_ready))) + ; + *kgdb_port->write = val; +} + +/* Enable irq for receiving chars on the debug port, used by kgdb */ + +void +enableDebugIRQ(void) +{ + if (!kgdb_port) + return; + + *R_IRQ_MASK1_SET = kgdb_port->irq; + /* use R_VECT_MASK directly, since we really bypass Linux normal + * IRQ handling in kgdb anyway, we don't need to use enable_irq + */ + *R_VECT_MASK_SET = IO_STATE(R_VECT_MASK_SET, serial, set); + + *kgdb_port->rec_ctrl = IO_STATE(R_SERIAL0_REC_CTRL, rec_enable, enable); +} + +static int __init +console_setup(struct console *co, char *options) +{ + char* s; + + if (options) { + port = &ports[co->index]; + port->baudrate = 115200; + port->parity = 'N'; + port->bits = 8; + port->baudrate = simple_strtoul(options, NULL, 10); + s = options; + while(*s >= '0' && *s <= '9') + s++; + if (*s) port->parity = *s++; + if (*s) port->bits = *s++ - '0'; + port->started = 0; + start_port(0); + } + return 0; +} + + +/* This is a dummy serial device that throws away anything written to it. + * This is used when no debug output is wanted. + */ +static struct tty_driver dummy_driver; + +static int dummy_open(struct tty_struct *tty, struct file * filp) +{ + return 0; +} + +static void dummy_close(struct tty_struct *tty, struct file * filp) +{ +} + +static int dummy_write(struct tty_struct * tty, + const unsigned char *buf, int count) +{ + return count; +} + +static int dummy_write_room(struct tty_struct *tty) +{ + return 8192; +} + +static const struct tty_operations dummy_ops = { + .open = dummy_open, + .close = dummy_close, + .write = dummy_write, + .write_room = dummy_write_room, +}; + +void __init +init_dummy_console(void) +{ + memset(&dummy_driver, 0, sizeof(struct tty_driver)); + dummy_driver.driver_name = "serial"; + dummy_driver.name = "ttyS"; + dummy_driver.major = TTY_MAJOR; + dummy_driver.minor_start = 68; + dummy_driver.num = 1; /* etrax100 has 4 serial ports */ + dummy_driver.type = TTY_DRIVER_TYPE_SERIAL; + dummy_driver.subtype = SERIAL_TYPE_NORMAL; + dummy_driver.init_termios = tty_std_termios; + /* Normally B9600 default... */ + dummy_driver.init_termios.c_cflag = + B115200 | CS8 | CREAD | HUPCL | CLOCAL; + dummy_driver.flags = TTY_DRIVER_REAL_RAW | TTY_DRIVER_DYNAMIC_DEV; + dummy_driver.init_termios.c_ispeed = 115200; + dummy_driver.init_termios.c_ospeed = 115200; + + dummy_driver.ops = &dummy_ops; + if (tty_register_driver(&dummy_driver)) + panic("Couldn't register dummy serial driver\n"); +} + +static struct tty_driver* +etrax_console_device(struct console* co, int *index) +{ + if (port) + *index = port->index; + else + *index = 0; +#ifdef CONFIG_ETRAX_SERIAL + return port ? serial_driver : &dummy_driver; +#else + return &dummy_driver; +#endif +} + +static struct console sercons = { + name : "ttyS", + write: console_write, + read : NULL, + device : etrax_console_device, + unblank : NULL, + setup : console_setup, + flags : CON_PRINTBUFFER, + index : -1, + cflag : 0, + next : NULL +}; +static struct console sercons0 = { + name : "ttyS", + write: console_write, + read : NULL, + device : etrax_console_device, + unblank : NULL, + setup : console_setup, + flags : CON_PRINTBUFFER, + index : 0, + cflag : 0, + next : NULL +}; + +static struct console sercons1 = { + name : "ttyS", + write: console_write, + read : NULL, + device : etrax_console_device, + unblank : NULL, + setup : console_setup, + flags : CON_PRINTBUFFER, + index : 1, + cflag : 0, + next : NULL +}; +static struct console sercons2 = { + name : "ttyS", + write: console_write, + read : NULL, + device : etrax_console_device, + unblank : NULL, + setup : console_setup, + flags : CON_PRINTBUFFER, + index : 2, + cflag : 0, + next : NULL +}; +static struct console sercons3 = { + name : "ttyS", + write: console_write, + read : NULL, + device : etrax_console_device, + unblank : NULL, + setup : console_setup, + flags : CON_PRINTBUFFER, + index : 3, + cflag : 0, + next : NULL +}; +/* + * Register console (for printk's etc) + */ + +int __init +init_etrax_debug(void) +{ + static int first = 1; + + if (!first) { + unregister_console(&sercons); + register_console(&sercons0); + register_console(&sercons1); + register_console(&sercons2); + register_console(&sercons3); + init_dummy_console(); + return 0; + } + + first = 0; + register_console(&sercons); + start_port(port); +#ifdef CONFIG_ETRAX_KGDB + start_port(kgdb_port); +#endif + return 0; +} +__initcall(init_etrax_debug); diff --git a/kernel/arch/cris/arch-v10/kernel/dma.c b/kernel/arch/cris/arch-v10/kernel/dma.c new file mode 100644 index 000000000..579504735 --- /dev/null +++ b/kernel/arch/cris/arch-v10/kernel/dma.c @@ -0,0 +1,287 @@ +/* Wrapper for DMA channel allocator that updates DMA client muxing. + * Copyright 2004-2007, Axis Communications AB + */ + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/errno.h> + +#include <asm/dma.h> +#include <arch/svinto.h> +#include <arch/system.h> + +/* Macro to access ETRAX 100 registers */ +#define SETS(var, reg, field, val) var = (var & ~IO_MASK_(reg##_, field##_)) | \ + IO_STATE_(reg##_, field##_, _##val) + + +static char used_dma_channels[MAX_DMA_CHANNELS]; +static const char * used_dma_channels_users[MAX_DMA_CHANNELS]; + +int cris_request_dma(unsigned int dmanr, const char * device_id, + unsigned options, enum dma_owner owner) +{ + unsigned long flags; + unsigned long int gens; + int fail = -EINVAL; + + if (dmanr >= MAX_DMA_CHANNELS) { + printk(KERN_CRIT "cris_request_dma: invalid DMA channel %u\n", dmanr); + return -EINVAL; + } + + local_irq_save(flags); + if (used_dma_channels[dmanr]) { + local_irq_restore(flags); + if (options & DMA_VERBOSE_ON_ERROR) { + printk(KERN_CRIT "Failed to request DMA %i for %s, already allocated by %s\n", dmanr, device_id, used_dma_channels_users[dmanr]); + } + if (options & DMA_PANIC_ON_ERROR) { + panic("request_dma error!"); + } + return -EBUSY; + } + + gens = genconfig_shadow; + + switch(owner) + { + case dma_eth: + if ((dmanr != NETWORK_TX_DMA_NBR) && + (dmanr != NETWORK_RX_DMA_NBR)) { + printk(KERN_CRIT "Invalid DMA channel for eth\n"); + goto bail; + } + break; + case dma_ser0: + if (dmanr == SER0_TX_DMA_NBR) { + SETS(gens, R_GEN_CONFIG, dma6, serial0); + } else if (dmanr == SER0_RX_DMA_NBR) { + SETS(gens, R_GEN_CONFIG, dma7, serial0); + } else { + printk(KERN_CRIT "Invalid DMA channel for ser0\n"); + goto bail; + } + break; + case dma_ser1: + if (dmanr == SER1_TX_DMA_NBR) { + SETS(gens, R_GEN_CONFIG, dma8, serial1); + } else if (dmanr == SER1_RX_DMA_NBR) { + SETS(gens, R_GEN_CONFIG, dma9, serial1); + } else { + printk(KERN_CRIT "Invalid DMA channel for ser1\n"); + goto bail; + } + break; + case dma_ser2: + if (dmanr == SER2_TX_DMA_NBR) { + SETS(gens, R_GEN_CONFIG, dma2, serial2); + } else if (dmanr == SER2_RX_DMA_NBR) { + SETS(gens, R_GEN_CONFIG, dma3, serial2); + } else { + printk(KERN_CRIT "Invalid DMA channel for ser2\n"); + goto bail; + } + break; + case dma_ser3: + if (dmanr == SER3_TX_DMA_NBR) { + SETS(gens, R_GEN_CONFIG, dma4, serial3); + } else if (dmanr == SER3_RX_DMA_NBR) { + SETS(gens, R_GEN_CONFIG, dma5, serial3); + } else { + printk(KERN_CRIT "Invalid DMA channel for ser3\n"); + goto bail; + } + break; + case dma_ata: + if (dmanr == ATA_TX_DMA_NBR) { + SETS(gens, R_GEN_CONFIG, dma2, ata); + } else if (dmanr == ATA_RX_DMA_NBR) { + SETS(gens, R_GEN_CONFIG, dma3, ata); + } else { + printk(KERN_CRIT "Invalid DMA channel for ata\n"); + goto bail; + } + break; + case dma_ext0: + if (dmanr == EXTDMA0_TX_DMA_NBR) { + SETS(gens, R_GEN_CONFIG, dma4, extdma0); + } else if (dmanr == EXTDMA0_RX_DMA_NBR) { + SETS(gens, R_GEN_CONFIG, dma5, extdma0); + } else { + printk(KERN_CRIT "Invalid DMA channel for ext0\n"); + goto bail; + } + break; + case dma_ext1: + if (dmanr == EXTDMA1_TX_DMA_NBR) { + SETS(gens, R_GEN_CONFIG, dma6, extdma1); + } else if (dmanr == EXTDMA1_RX_DMA_NBR) { + SETS(gens, R_GEN_CONFIG, dma7, extdma1); + } else { + printk(KERN_CRIT "Invalid DMA channel for ext1\n"); + goto bail; + } + break; + case dma_int6: + if (dmanr == MEM2MEM_RX_DMA_NBR) { + SETS(gens, R_GEN_CONFIG, dma7, intdma6); + } else { + printk(KERN_CRIT "Invalid DMA channel for int6\n"); + goto bail; + } + break; + case dma_int7: + if (dmanr == MEM2MEM_TX_DMA_NBR) { + SETS(gens, R_GEN_CONFIG, dma6, intdma7); + } else { + printk(KERN_CRIT "Invalid DMA channel for int7\n"); + goto bail; + } + break; + case dma_usb: + if (dmanr == USB_TX_DMA_NBR) { + SETS(gens, R_GEN_CONFIG, dma8, usb); + } else if (dmanr == USB_RX_DMA_NBR) { + SETS(gens, R_GEN_CONFIG, dma9, usb); + } else { + printk(KERN_CRIT "Invalid DMA channel for usb\n"); + goto bail; + } + break; + case dma_scsi0: + if (dmanr == SCSI0_TX_DMA_NBR) { + SETS(gens, R_GEN_CONFIG, dma2, scsi0); + } else if (dmanr == SCSI0_RX_DMA_NBR) { + SETS(gens, R_GEN_CONFIG, dma3, scsi0); + } else { + printk(KERN_CRIT "Invalid DMA channel for scsi0\n"); + goto bail; + } + break; + case dma_scsi1: + if (dmanr == SCSI1_TX_DMA_NBR) { + SETS(gens, R_GEN_CONFIG, dma4, scsi1); + } else if (dmanr == SCSI1_RX_DMA_NBR) { + SETS(gens, R_GEN_CONFIG, dma5, scsi1); + } else { + printk(KERN_CRIT "Invalid DMA channel for scsi1\n"); + goto bail; + } + break; + case dma_par0: + if (dmanr == PAR0_TX_DMA_NBR) { + SETS(gens, R_GEN_CONFIG, dma2, par0); + } else if (dmanr == PAR0_RX_DMA_NBR) { + SETS(gens, R_GEN_CONFIG, dma3, par0); + } else { + printk(KERN_CRIT "Invalid DMA channel for par0\n"); + goto bail; + } + break; + case dma_par1: + if (dmanr == PAR1_TX_DMA_NBR) { + SETS(gens, R_GEN_CONFIG, dma4, par1); + } else if (dmanr == PAR1_RX_DMA_NBR) { + SETS(gens, R_GEN_CONFIG, dma5, par1); + } else { + printk(KERN_CRIT "Invalid DMA channel for par1\n"); + goto bail; + } + break; + default: + printk(KERN_CRIT "Invalid DMA owner.\n"); + goto bail; + } + + used_dma_channels[dmanr] = 1; + used_dma_channels_users[dmanr] = device_id; + + { + volatile int i; + genconfig_shadow = gens; + *R_GEN_CONFIG = genconfig_shadow; + /* Wait 12 cycles before doing any DMA command */ + for(i = 6; i > 0; i--) + nop(); + } + fail = 0; + bail: + local_irq_restore(flags); + return fail; +} + +void cris_free_dma(unsigned int dmanr, const char * device_id) +{ + unsigned long flags; + if (dmanr >= MAX_DMA_CHANNELS) { + printk(KERN_CRIT "cris_free_dma: invalid DMA channel %u\n", dmanr); + return; + } + + local_irq_save(flags); + if (!used_dma_channels[dmanr]) { + printk(KERN_CRIT "cris_free_dma: DMA channel %u not allocated\n", dmanr); + } else if (device_id != used_dma_channels_users[dmanr]) { + printk(KERN_CRIT "cris_free_dma: DMA channel %u not allocated by device\n", dmanr); + } else { + switch(dmanr) + { + case 0: + *R_DMA_CH0_CMD = IO_STATE(R_DMA_CH0_CMD, cmd, reset); + while (IO_EXTRACT(R_DMA_CH0_CMD, cmd, *R_DMA_CH0_CMD) == + IO_STATE_VALUE(R_DMA_CH0_CMD, cmd, reset)); + break; + case 1: + *R_DMA_CH1_CMD = IO_STATE(R_DMA_CH1_CMD, cmd, reset); + while (IO_EXTRACT(R_DMA_CH1_CMD, cmd, *R_DMA_CH1_CMD) == + IO_STATE_VALUE(R_DMA_CH1_CMD, cmd, reset)); + break; + case 2: + *R_DMA_CH2_CMD = IO_STATE(R_DMA_CH2_CMD, cmd, reset); + while (IO_EXTRACT(R_DMA_CH2_CMD, cmd, *R_DMA_CH2_CMD) == + IO_STATE_VALUE(R_DMA_CH2_CMD, cmd, reset)); + break; + case 3: + *R_DMA_CH3_CMD = IO_STATE(R_DMA_CH3_CMD, cmd, reset); + while (IO_EXTRACT(R_DMA_CH3_CMD, cmd, *R_DMA_CH3_CMD) == + IO_STATE_VALUE(R_DMA_CH3_CMD, cmd, reset)); + break; + case 4: + *R_DMA_CH4_CMD = IO_STATE(R_DMA_CH4_CMD, cmd, reset); + while (IO_EXTRACT(R_DMA_CH4_CMD, cmd, *R_DMA_CH4_CMD) == + IO_STATE_VALUE(R_DMA_CH4_CMD, cmd, reset)); + break; + case 5: + *R_DMA_CH5_CMD = IO_STATE(R_DMA_CH5_CMD, cmd, reset); + while (IO_EXTRACT(R_DMA_CH5_CMD, cmd, *R_DMA_CH5_CMD) == + IO_STATE_VALUE(R_DMA_CH5_CMD, cmd, reset)); + break; + case 6: + *R_DMA_CH6_CMD = IO_STATE(R_DMA_CH6_CMD, cmd, reset); + while (IO_EXTRACT(R_DMA_CH6_CMD, cmd, *R_DMA_CH6_CMD) == + IO_STATE_VALUE(R_DMA_CH6_CMD, cmd, reset)); + break; + case 7: + *R_DMA_CH7_CMD = IO_STATE(R_DMA_CH7_CMD, cmd, reset); + while (IO_EXTRACT(R_DMA_CH7_CMD, cmd, *R_DMA_CH7_CMD) == + IO_STATE_VALUE(R_DMA_CH7_CMD, cmd, reset)); + break; + case 8: + *R_DMA_CH8_CMD = IO_STATE(R_DMA_CH8_CMD, cmd, reset); + while (IO_EXTRACT(R_DMA_CH8_CMD, cmd, *R_DMA_CH8_CMD) == + IO_STATE_VALUE(R_DMA_CH8_CMD, cmd, reset)); + break; + case 9: + *R_DMA_CH9_CMD = IO_STATE(R_DMA_CH9_CMD, cmd, reset); + while (IO_EXTRACT(R_DMA_CH9_CMD, cmd, *R_DMA_CH9_CMD) == + IO_STATE_VALUE(R_DMA_CH9_CMD, cmd, reset)); + break; + } + used_dma_channels[dmanr] = 0; + } + local_irq_restore(flags); +} + +EXPORT_SYMBOL(cris_request_dma); +EXPORT_SYMBOL(cris_free_dma); diff --git a/kernel/arch/cris/arch-v10/kernel/entry.S b/kernel/arch/cris/arch-v10/kernel/entry.S new file mode 100644 index 000000000..81570fcd0 --- /dev/null +++ b/kernel/arch/cris/arch-v10/kernel/entry.S @@ -0,0 +1,969 @@ +/* + * linux/arch/cris/entry.S + * + * Copyright (C) 2000, 2001, 2002 Axis Communications AB + * + * Authors: Bjorn Wesen (bjornw@axis.com) + */ + +/* + * entry.S contains the system-call and fault low-level handling routines. + * + * NOTE: This code handles signal-recognition, which happens every time + * after a timer-interrupt and after each system call. + * + * Stack layout in 'ret_from_system_call': + * ptrace needs to have all regs on the stack. + * if the order here is changed, it needs to be + * updated in fork.c:copy_process, signal.c:do_signal, + * ptrace.c and ptrace.h + * + */ + +#include <linux/linkage.h> +#include <linux/sys.h> +#include <asm/unistd.h> +#include <arch/sv_addr_ag.h> +#include <asm/errno.h> +#include <asm/thread_info.h> +#include <asm/asm-offsets.h> +#include <asm/page.h> +#include <asm/pgtable.h> + + ;; functions exported from this file + + .globl system_call + .globl ret_from_intr + .globl ret_from_fork + .globl ret_from_kernel_thread + .globl resume + .globl multiple_interrupt + .globl hwbreakpoint + .globl IRQ1_interrupt + .globl spurious_interrupt + .globl hw_bp_trigs + .globl mmu_bus_fault + .globl do_sigtrap + .globl gdb_handle_breakpoint + .globl sys_call_table + + ;; below are various parts of system_call which are not in the fast-path + +#ifdef CONFIG_PREEMPT + ; Check if preemptive kernel scheduling should be done +_resume_kernel: + di + ; Load current task struct + movs.w -8192, $r0 ; THREAD_SIZE = 8192 + and.d $sp, $r0 + move.d [$r0+TI_preempt_count], $r10 ; Preemption disabled? + bne _Rexit + nop +_need_resched: + move.d [$r0+TI_flags], $r10 + btstq TIF_NEED_RESCHED, $r10 ; Check if need_resched is set + bpl _Rexit + nop + ; Ok, lets's do some preemptive kernel scheduling + jsr preempt_schedule_irq + ; Load new task struct + movs.w -8192, $r0 ; THREAD_SIZE = 8192 + and.d $sp, $r0 + ; One more time (with new task) + ba _need_resched + nop +#else +#define _resume_kernel _Rexit +#endif + + ; Called at exit from fork. schedule_tail must be called to drop + ; spinlock if CONFIG_PREEMPT +ret_from_fork: + jsr schedule_tail + ba ret_from_sys_call + nop + +ret_from_kernel_thread: + jsr schedule_tail + move.d $r2, $r10 ; argument is here + jsr $r1 ; call the payload + moveq 0, $r9 ; no syscall restarts, TYVM... + ba ret_from_sys_call + +ret_from_intr: + ;; check for resched if preemptive kernel or if we're going back to user-mode + ;; this test matches the user_regs(regs) macro + ;; we cannot simply test $dccr, because that does not necessarily + ;; reflect what mode we'll return into. + + move.d [$sp + PT_dccr], $r0; regs->dccr + btstq 8, $r0 ; U-flag + bpl _resume_kernel + ; Note that di below is in delay slot + +_resume_userspace: + di ; so need_resched and sigpending don't change + + movs.w -8192, $r0 ; THREAD_SIZE == 8192 + and.d $sp, $r0 + + move.d [$r0+TI_flags], $r10 ; current->work + and.d _TIF_WORK_MASK, $r10 ; is there any work to be done on return + bne _work_pending + nop + ba _Rexit + nop + + ;; The system_call is called by a BREAK instruction, which works like + ;; an interrupt call but it stores the return PC in BRP instead of IRP. + ;; Since we dont really want to have two epilogues (one for system calls + ;; and one for interrupts) we push the contents of BRP instead of IRP in the + ;; system call prologue, to make it look like an ordinary interrupt on the + ;; stackframe. + ;; + ;; Since we can't have system calls inside interrupts, it should not matter + ;; that we don't stack IRP. + ;; + ;; In r9 we have the wanted syscall number. Arguments come in r10,r11,r12,r13,mof,srp + ;; + ;; This function looks on the _surface_ like spaghetti programming, but it's + ;; really designed so that the fast-path does not force cache-loading of non-used + ;; instructions. Only the non-common cases cause the outlined code to run.. + +system_call: + ;; stack-frame similar to the irq heads, which is reversed in ret_from_sys_call + move $brp,[$sp=$sp-16]; instruction pointer and room for a fake SBFS frame + push $srp + push $dccr + push $mof + subq 14*4, $sp ; make room for r0-r13 + movem $r13, [$sp] ; push r0-r13 + push $r10 ; push orig_r10 + clear.d [$sp=$sp-4] ; frametype == 0, normal stackframe + + movs.w -ENOSYS, $r0 + move.d $r0, [$sp+PT_r10] ; put the default return value in r10 in the frame + + ;; check if this process is syscall-traced + + movs.w -8192, $r0 ; THREAD_SIZE == 8192 + and.d $sp, $r0 + + move.d [$r0+TI_flags], $r0 + btstq TIF_SYSCALL_TRACE, $r0 + bmi _syscall_trace_entry + nop + +_syscall_traced: + + ;; check for sanity in the requested syscall number + + cmpu.w NR_syscalls, $r9 + bcc ret_from_sys_call + lslq 2, $r9 ; multiply by 4, in the delay slot + + ;; as a bonus 7th parameter, we give the location on the stack + ;; of the register structure itself. some syscalls need this. + + push $sp + + ;; the parameter carrying registers r10, r11, r12 and 13 are intact. + ;; the fifth and sixth parameters (if any) was in mof and srp + ;; respectively, and we need to put them on the stack. + + push $srp + push $mof + + jsr [$r9+sys_call_table] ; actually do the system call + addq 3*4, $sp ; pop the mof, srp and regs parameters + move.d $r10, [$sp+PT_r10] ; save the return value + + moveq 1, $r9 ; "parameter" to ret_from_sys_call to show it was a sys call + + ;; fall through into ret_from_sys_call to return + +ret_from_sys_call: + ;; r9 is a parameter - if >=1 we came from a syscall, if 0, from an irq + + ;; get the current task-struct pointer (see top for defs) + + movs.w -8192, $r0 ; THREAD_SIZE == 8192 + and.d $sp, $r0 + + di ; make sure need_resched and sigpending don't change + move.d [$r0+TI_flags],$r1 + and.d _TIF_ALLWORK_MASK, $r1 + bne _syscall_exit_work + nop + +_Rexit: + ;; this epilogue MUST match the prologues in multiple_interrupt, irq.h and ptregs.h + pop $r10 ; frametype + bne _RBFexit ; was not CRIS_FRAME_NORMAL, handle otherwise + addq 4, $sp ; skip orig_r10, in delayslot + movem [$sp+], $r13 ; registers r0-r13 + pop $mof ; multiply overflow register + pop $dccr ; condition codes + pop $srp ; subroutine return pointer + ;; now we have a 4-word SBFS frame which we do not want to restore + ;; using RBF since it was not stacked with SBFS. instead we would like to + ;; just get the PC value to restart it with, and skip the rest of + ;; the frame. + ;; Also notice that it's important to use instructions here that + ;; keep the interrupts disabled (since we've already popped DCCR) + move [$sp=$sp+16], $p8; pop the SBFS frame from the sp + jmpu [$sp-16] ; return through the irp field in the sbfs frame + +_RBFexit: + movem [$sp+], $r13 ; registers r0-r13, in delay slot + pop $mof ; multiply overflow register + pop $dccr ; condition codes + pop $srp ; subroutine return pointer + rbf [$sp+] ; return by popping the CPU status + + ;; We get here after doing a syscall if extra work might need to be done + ;; perform syscall exit tracing if needed + +_syscall_exit_work: + ;; $r0 contains current at this point and irq's are disabled + + move.d [$r0+TI_flags], $r1 + btstq TIF_SYSCALL_TRACE, $r1 + bpl _work_pending + nop + + ei + + move.d $r9, $r1 ; preserve r9 + jsr do_syscall_trace + move.d $r1, $r9 + + ba _resume_userspace + nop + +_work_pending: + move.d [$r0+TI_flags], $r1 + btstq TIF_NEED_RESCHED, $r1 + bpl _work_notifysig ; was neither trace nor sched, must be signal/notify + nop + +_work_resched: + move.d $r9, $r1 ; preserve r9 + jsr schedule + move.d $r1, $r9 + di + + move.d [$r0+TI_flags], $r1 + and.d _TIF_WORK_MASK, $r1; ignore the syscall trace counter + beq _Rexit + nop + btstq TIF_NEED_RESCHED, $r1 + bmi _work_resched ; current->work.need_resched + nop + +_work_notifysig: + ;; deal with pending signals and notify-resume requests + + move.d $r9, $r10 ; do_notify_resume syscall/irq param + move.d $sp, $r11 ; the regs param + move.d $r1, $r12 ; the thread_info_flags parameter + jsr do_notify_resume + + ba _Rexit + nop + + ;; We get here as a sidetrack when we've entered a syscall with the + ;; trace-bit set. We need to call do_syscall_trace and then continue + ;; with the call. + +_syscall_trace_entry: + ;; PT_r10 in the frame contains -ENOSYS as required, at this point + + jsr do_syscall_trace + + ;; now re-enter the syscall code to do the syscall itself + ;; we need to restore $r9 here to contain the wanted syscall, and + ;; the other parameter-bearing registers + + move.d [$sp+PT_r9], $r9 + move.d [$sp+PT_orig_r10], $r10 ; PT_r10 is already filled with -ENOSYS. + move.d [$sp+PT_r11], $r11 + move.d [$sp+PT_r12], $r12 + move.d [$sp+PT_r13], $r13 + move [$sp+PT_mof], $mof + move [$sp+PT_srp], $srp + + ba _syscall_traced + nop + + ;; resume performs the actual task-switching, by switching stack pointers + ;; input arguments: r10 = prev, r11 = next, r12 = thread offset in task struct + ;; returns old current in r10 + ;; + ;; TODO: see the i386 version. The switch_to which calls resume in our version + ;; could really be an inline asm of this. + +resume: + push $srp ; we keep the old/new PC on the stack + add.d $r12, $r10 ; r10 = current tasks tss + move $dccr, [$r10+THREAD_dccr]; save irq enable state + di + + move $usp, [$r10+ THREAD_usp] ; save user-mode stackpointer + + ;; See copy_thread for the reason why register R9 is saved. + subq 10*4, $sp + movem $r9, [$sp] ; save non-scratch registers and R9. + + move.d $sp, [$r10+THREAD_ksp] ; save the kernel stack pointer for the old task + move.d $sp, $r10 ; return last running task in r10 + and.d -8192, $r10 ; get thread_info from stackpointer + move.d [$r10+TI_task], $r10 ; get task + add.d $r12, $r11 ; find the new tasks tss + move.d [$r11+THREAD_ksp], $sp ; switch into the new stackframe by restoring kernel sp + + movem [$sp+], $r9 ; restore non-scratch registers and R9. + + move [$r11+THREAD_usp], $usp ; restore user-mode stackpointer + + move [$r11+THREAD_dccr], $dccr ; restore irq enable status + jump [$sp+] ; restore PC + + ;; This is the MMU bus fault handler. + ;; It needs to stack the CPU status and overall is different + ;; from the other interrupt handlers. + +mmu_bus_fault: + ;; For refills we try to do a quick page table lookup. If it is + ;; a real fault we let the mm subsystem handle it. + + ;; the first longword in the sbfs frame was the interrupted PC + ;; which fits nicely with the "IRP" slot in pt_regs normally used to + ;; contain the return address. used by Oops to print kernel errors. + sbfs [$sp=$sp-16] ; push the internal CPU status + push $dccr + di + subq 2*4, $sp + movem $r1, [$sp] + move.d [R_MMU_CAUSE], $r1 + ;; ETRAX 100LX TR89 bugfix: if the second half of an unaligned + ;; write causes a MMU-fault, it will not be restarted correctly. + ;; This could happen if a write crosses a page-boundary and the + ;; second page is not yet COW'ed or even loaded. The workaround + ;; is to clear the unaligned bit in the CPU status record, so + ;; that the CPU will rerun both the first and second halves of + ;; the instruction. This will not have any sideeffects unless + ;; the first half goes to any device or memory that can't be + ;; written twice, and which is mapped through the MMU. + ;; + ;; We only need to do this for writes. + btstq 8, $r1 ; Write access? + bpl 1f + nop + move.d [$sp+16], $r0 ; Clear unaligned bit in csrinstr + and.d ~(1<<5), $r0 + move.d $r0, [$sp+16] +1: btstq 12, $r1 ; Refill? + bpl 2f + lsrq 24, $r1 ; Get PGD index (bit 24-31) + move.d [current_pgd], $r0 ; PGD for the current process + move.d [$r0+$r1.d], $r0 ; Get PMD + beq 2f + nop + and.w PAGE_MASK, $r0 ; Remove PMD flags + move.d [R_MMU_CAUSE], $r1 + lsrq PAGE_SHIFT, $r1 + and.d 0x7ff, $r1 ; Get PTE index into PGD (bit 13-23) + move.d [$r0+$r1.d], $r1 ; Get PTE + beq 2f + nop + ;; Store in TLB + move.d $r1, [R_TLB_LO] + ;; Return + movem [$sp+], $r1 + pop $dccr + rbf [$sp+] ; return by popping the CPU status + +2: ; PMD or PTE missing, let the mm subsystem fix it up. + movem [$sp+], $r1 + pop $dccr + + ; Ok, not that easy, pass it on to the mm subsystem + ; The MMU status record is now on the stack + push $srp ; make a stackframe similar to pt_regs + push $dccr + push $mof + di + subq 14*4, $sp + movem $r13, [$sp] + push $r10 ; dummy orig_r10 + moveq 1, $r10 + push $r10 ; frametype == 1, BUSFAULT frame type + + move.d $sp, $r10 ; pt_regs argument to handle_mmu_bus_fault + + jsr handle_mmu_bus_fault ; in arch/cris/arch-v10/mm/fault.c + + ;; now we need to return through the normal path, we cannot just + ;; do the RBFexit since we might have killed off the running + ;; process due to a SEGV, scheduled due to a page blocking or + ;; whatever. + + moveq 0, $r9 ; busfault is equivalent to an irq + + ba ret_from_intr + nop + + ;; special handlers for breakpoint and NMI +hwbreakpoint: + push $dccr + di + push $r10 + push $r11 + move.d [hw_bp_trig_ptr],$r10 + move $brp,$r11 + move.d $r11,[$r10+] + move.d $r10,[hw_bp_trig_ptr] +1: pop $r11 + pop $r10 + pop $dccr + retb + nop + +IRQ1_interrupt: + ;; this prologue MUST match the one in irq.h and the struct in ptregs.h!!! + move $brp,[$sp=$sp-16]; instruction pointer and room for a fake SBFS frame + push $srp + push $dccr + push $mof + di + subq 14*4, $sp + movem $r13, [$sp] + push $r10 ; push orig_r10 + clear.d [$sp=$sp-4] ; frametype == 0, normal frame + + ;; If there is a glitch on the NMI pin shorter than ~100ns + ;; (i.e. non-active by the time we get here) then the nmi_pin bit + ;; in R_IRQ_MASK0_RD will already be cleared. The watchdog_nmi bit + ;; is cleared by us however (when feeding the watchdog), which is why + ;; we use that bit to determine what brought us here. + + move.d [R_IRQ_MASK0_RD], $r1 ; External NMI or watchdog? + and.d (1<<30), $r1 + bne wdog + move.d $sp, $r10 + jsr handle_nmi + setf m ; Enable NMI again + ba _Rexit ; Return the standard way + nop +wdog: +#if defined(CONFIG_ETRAX_WATCHDOG) +;; Check if we're waiting for reset to happen, as signalled by +;; hard_reset_now setting cause_of_death to a magic value. If so, just +;; get stuck until reset happens. + .comm cause_of_death, 4 ;; Don't declare this anywhere. + move.d [cause_of_death], $r10 + cmp.d 0xbedead, $r10 +_killed_by_death: + beq _killed_by_death + nop + +;; We'll see this in ksymoops dumps. +Watchdog_bite: + +#ifdef CONFIG_ETRAX_WATCHDOG_NICE_DOGGY + ;; We just restart the watchdog here to be sure we dont get + ;; hit while printing the watchdogmsg below + ;; This restart is compatible with the rest of the C-code, so + ;; the C-code can keep restarting the watchdog after this point. + ;; The non-NICE_DOGGY code below though, disables the possibility + ;; to restart since it changes the watchdog key, to avoid any + ;; buggy loops etc. keeping the watchdog alive after this. + jsr reset_watchdog +#else + +;; We need to extend the 3.3ms after the NMI at watchdog bite, so we have +;; time for an oops-dump over a 115k2 serial wire. Another 100ms should do. + +;; Change the watchdog key to an arbitrary 3-bit value and restart the +;; watchdog. +#define WD_INIT 2 + moveq IO_FIELD (R_WATCHDOG, key, WD_INIT), $r10 + move.d R_WATCHDOG, $r11 + + move.d $r10, [$r11] + moveq IO_FIELD (R_WATCHDOG, key, \ + IO_EXTRACT (R_WATCHDOG, key, \ + IO_MASK (R_WATCHDOG, key)) \ + ^ WD_INIT) \ + | IO_STATE (R_WATCHDOG, enable, start), $r10 + move.d $r10, [$r11] + +#endif + +;; Note that we don't do "setf m" here (or after two necessary NOPs), +;; since *not* doing that saves us from re-entrancy checks. We don't want +;; to get here again due to possible subsequent NMIs; we want the watchdog +;; to reset us. + + move.d _watchdogmsg,$r10 + jsr printk + + move.d $sp, $r10 + jsr watchdog_bite_hook + +;; This nop is here so we see the "Watchdog_bite" label in ksymoops dumps +;; rather than "spurious_interrupt". + nop +;; At this point we drop down into spurious_interrupt, which will do a +;; hard reset. + + .section .rodata,"a" +_watchdogmsg: + .ascii "Oops: bitten by watchdog\n\0" + .previous + +#endif /* CONFIG_ETRAX_WATCHDOG */ + +spurious_interrupt: + di + jump hard_reset_now + + ;; this handles the case when multiple interrupts arrive at the same time + ;; we jump to the first set interrupt bit in a priority fashion + ;; the hardware will call the unserved interrupts after the handler finishes + +multiple_interrupt: + ;; this prologue MUST match the one in irq.h and the struct in ptregs.h!!! + move $irp,[$sp=$sp-16]; instruction pointer and room for a fake SBFS frame + push $srp + push $dccr + push $mof + di + subq 14*4, $sp + movem $r13, [$sp] + push $r10 ; push orig_r10 + clear.d [$sp=$sp-4] ; frametype == 0, normal frame + + move.d $sp, $r10 + jsr do_multiple_IRQ + + jump ret_from_intr + +do_sigtrap: + ;; + ;; SIGTRAP the process that executed the break instruction. + ;; Make a frame that Rexit in entry.S expects. + ;; + move $brp, [$sp=$sp-16] ; Push BRP while faking a cpu status record. + push $srp ; Push subroutine return pointer. + push $dccr ; Push condition codes. + push $mof ; Push multiply overflow reg. + di ; Need to disable irq's at this point. + subq 14*4, $sp ; Make room for r0-r13. + movem $r13, [$sp] ; Push the r0-r13 registers. + push $r10 ; Push orig_r10. + clear.d [$sp=$sp-4] ; Frametype - this is a normal stackframe. + + movs.w -8192,$r9 ; THREAD_SIZE == 8192 + and.d $sp, $r9 + move.d [$r9+TI_task], $r10 + move.d [$r10+TASK_pid], $r10 ; current->pid as arg1. + moveq 5, $r11 ; SIGTRAP as arg2. + jsr sys_kill + jump ret_from_intr ; Use the return routine for interrupts. + +gdb_handle_breakpoint: + push $dccr + push $r0 +#ifdef CONFIG_ETRAX_KGDB + move $dccr, $r0 ; U-flag not affected by previous insns. + btstq 8, $r0 ; Test the U-flag. + bmi _ugdb_handle_breakpoint ; Go to user mode debugging. + nop ; Empty delay slot (cannot pop r0 here). + pop $r0 ; Restore r0. + ba kgdb_handle_breakpoint ; Go to kernel debugging. + pop $dccr ; Restore dccr in delay slot. +#endif + +_ugdb_handle_breakpoint: + move $brp, $r0 ; Use r0 temporarily for calculation. + subq 2, $r0 ; Set to address of previous instruction. + move $r0, $brp + pop $r0 ; Restore r0. + ba do_sigtrap ; SIGTRAP the offending process. + pop $dccr ; Restore dccr in delay slot. + + .data + +hw_bp_trigs: + .space 64*4 +hw_bp_trig_ptr: + .dword hw_bp_trigs + + .section .rodata,"a" +sys_call_table: + .long sys_restart_syscall /* 0 - old "setup()" system call, used for restarting */ + .long sys_exit + .long sys_fork + .long sys_read + .long sys_write + .long sys_open /* 5 */ + .long sys_close + .long sys_waitpid + .long sys_creat + .long sys_link + .long sys_unlink /* 10 */ + .long sys_execve + .long sys_chdir + .long sys_time + .long sys_mknod + .long sys_chmod /* 15 */ + .long sys_lchown16 + .long sys_ni_syscall /* old break syscall holder */ + .long sys_stat + .long sys_lseek + .long sys_getpid /* 20 */ + .long sys_mount + .long sys_oldumount + .long sys_setuid16 + .long sys_getuid16 + .long sys_stime /* 25 */ + .long sys_ptrace + .long sys_alarm + .long sys_fstat + .long sys_pause + .long sys_utime /* 30 */ + .long sys_ni_syscall /* old stty syscall holder */ + .long sys_ni_syscall /* old gtty syscall holder */ + .long sys_access + .long sys_nice + .long sys_ni_syscall /* 35 old ftime syscall holder */ + .long sys_sync + .long sys_kill + .long sys_rename + .long sys_mkdir + .long sys_rmdir /* 40 */ + .long sys_dup + .long sys_pipe + .long sys_times + .long sys_ni_syscall /* old prof syscall holder */ + .long sys_brk /* 45 */ + .long sys_setgid16 + .long sys_getgid16 + .long sys_signal + .long sys_geteuid16 + .long sys_getegid16 /* 50 */ + .long sys_acct + .long sys_umount /* recycled never used phys( */ + .long sys_ni_syscall /* old lock syscall holder */ + .long sys_ioctl + .long sys_fcntl /* 55 */ + .long sys_ni_syscall /* old mpx syscall holder */ + .long sys_setpgid + .long sys_ni_syscall /* old ulimit syscall holder */ + .long sys_ni_syscall /* old sys_olduname holder */ + .long sys_umask /* 60 */ + .long sys_chroot + .long sys_ustat + .long sys_dup2 + .long sys_getppid + .long sys_getpgrp /* 65 */ + .long sys_setsid + .long sys_sigaction + .long sys_sgetmask + .long sys_ssetmask + .long sys_setreuid16 /* 70 */ + .long sys_setregid16 + .long sys_sigsuspend + .long sys_sigpending + .long sys_sethostname + .long sys_setrlimit /* 75 */ + .long sys_old_getrlimit + .long sys_getrusage + .long sys_gettimeofday + .long sys_settimeofday + .long sys_getgroups16 /* 80 */ + .long sys_setgroups16 + .long sys_select /* was old_select in Linux/E100 */ + .long sys_symlink + .long sys_lstat + .long sys_readlink /* 85 */ + .long sys_uselib + .long sys_swapon + .long sys_reboot + .long sys_old_readdir + .long sys_old_mmap /* 90 */ + .long sys_munmap + .long sys_truncate + .long sys_ftruncate + .long sys_fchmod + .long sys_fchown16 /* 95 */ + .long sys_getpriority + .long sys_setpriority + .long sys_ni_syscall /* old profil syscall holder */ + .long sys_statfs + .long sys_fstatfs /* 100 */ + .long sys_ni_syscall /* sys_ioperm in i386 */ + .long sys_socketcall + .long sys_syslog + .long sys_setitimer + .long sys_getitimer /* 105 */ + .long sys_newstat + .long sys_newlstat + .long sys_newfstat + .long sys_ni_syscall /* old sys_uname holder */ + .long sys_ni_syscall /* 110 */ /* sys_iopl in i386 */ + .long sys_vhangup + .long sys_ni_syscall /* old "idle" system call */ + .long sys_ni_syscall /* vm86old in i386 */ + .long sys_wait4 + .long sys_swapoff /* 115 */ + .long sys_sysinfo + .long sys_ipc + .long sys_fsync + .long sys_sigreturn + .long sys_clone /* 120 */ + .long sys_setdomainname + .long sys_newuname + .long sys_ni_syscall /* sys_modify_ldt */ + .long sys_adjtimex + .long sys_mprotect /* 125 */ + .long sys_sigprocmask + .long sys_ni_syscall /* old "create_module" */ + .long sys_init_module + .long sys_delete_module + .long sys_ni_syscall /* 130: old "get_kernel_syms" */ + .long sys_quotactl + .long sys_getpgid + .long sys_fchdir + .long sys_bdflush + .long sys_sysfs /* 135 */ + .long sys_personality + .long sys_ni_syscall /* for afs_syscall */ + .long sys_setfsuid16 + .long sys_setfsgid16 + .long sys_llseek /* 140 */ + .long sys_getdents + .long sys_select + .long sys_flock + .long sys_msync + .long sys_readv /* 145 */ + .long sys_writev + .long sys_getsid + .long sys_fdatasync + .long sys_sysctl + .long sys_mlock /* 150 */ + .long sys_munlock + .long sys_mlockall + .long sys_munlockall + .long sys_sched_setparam + .long sys_sched_getparam /* 155 */ + .long sys_sched_setscheduler + .long sys_sched_getscheduler + .long sys_sched_yield + .long sys_sched_get_priority_max + .long sys_sched_get_priority_min /* 160 */ + .long sys_sched_rr_get_interval + .long sys_nanosleep + .long sys_mremap + .long sys_setresuid16 + .long sys_getresuid16 /* 165 */ + .long sys_ni_syscall /* sys_vm86 */ + .long sys_ni_syscall /* Old sys_query_module */ + .long sys_poll + .long sys_ni_syscall /* old nfsservctl */ + .long sys_setresgid16 /* 170 */ + .long sys_getresgid16 + .long sys_prctl + .long sys_rt_sigreturn + .long sys_rt_sigaction + .long sys_rt_sigprocmask /* 175 */ + .long sys_rt_sigpending + .long sys_rt_sigtimedwait + .long sys_rt_sigqueueinfo + .long sys_rt_sigsuspend + .long sys_pread64 /* 180 */ + .long sys_pwrite64 + .long sys_chown16 + .long sys_getcwd + .long sys_capget + .long sys_capset /* 185 */ + .long sys_sigaltstack + .long sys_sendfile + .long sys_ni_syscall /* streams1 */ + .long sys_ni_syscall /* streams2 */ + .long sys_vfork /* 190 */ + .long sys_getrlimit + .long sys_mmap2 /* mmap_pgoff */ + .long sys_truncate64 + .long sys_ftruncate64 + .long sys_stat64 /* 195 */ + .long sys_lstat64 + .long sys_fstat64 + .long sys_lchown + .long sys_getuid + .long sys_getgid /* 200 */ + .long sys_geteuid + .long sys_getegid + .long sys_setreuid + .long sys_setregid + .long sys_getgroups /* 205 */ + .long sys_setgroups + .long sys_fchown + .long sys_setresuid + .long sys_getresuid + .long sys_setresgid /* 210 */ + .long sys_getresgid + .long sys_chown + .long sys_setuid + .long sys_setgid + .long sys_setfsuid /* 215 */ + .long sys_setfsgid + .long sys_pivot_root + .long sys_mincore + .long sys_madvise + .long sys_getdents64 /* 220 */ + .long sys_fcntl64 + .long sys_ni_syscall /* reserved for TUX */ + .long sys_ni_syscall + .long sys_gettid + .long sys_readahead /* 225 */ + .long sys_setxattr + .long sys_lsetxattr + .long sys_fsetxattr + .long sys_getxattr + .long sys_lgetxattr /* 230 */ + .long sys_fgetxattr + .long sys_listxattr + .long sys_llistxattr + .long sys_flistxattr + .long sys_removexattr /* 235 */ + .long sys_lremovexattr + .long sys_fremovexattr + .long sys_tkill + .long sys_sendfile64 + .long sys_futex /* 240 */ + .long sys_sched_setaffinity + .long sys_sched_getaffinity + .long sys_ni_syscall /* sys_set_thread_area */ + .long sys_ni_syscall /* sys_get_thread_area */ + .long sys_io_setup /* 245 */ + .long sys_io_destroy + .long sys_io_getevents + .long sys_io_submit + .long sys_io_cancel + .long sys_fadvise64 /* 250 */ + .long sys_ni_syscall + .long sys_exit_group + .long sys_lookup_dcookie + .long sys_epoll_create + .long sys_epoll_ctl /* 255 */ + .long sys_epoll_wait + .long sys_remap_file_pages + .long sys_set_tid_address + .long sys_timer_create + .long sys_timer_settime /* 260 */ + .long sys_timer_gettime + .long sys_timer_getoverrun + .long sys_timer_delete + .long sys_clock_settime + .long sys_clock_gettime /* 265 */ + .long sys_clock_getres + .long sys_clock_nanosleep + .long sys_statfs64 + .long sys_fstatfs64 + .long sys_tgkill /* 270 */ + .long sys_utimes + .long sys_fadvise64_64 + .long sys_ni_syscall /* sys_vserver */ + .long sys_ni_syscall /* sys_mbind */ + .long sys_ni_syscall /* 275 sys_get_mempolicy */ + .long sys_ni_syscall /* sys_set_mempolicy */ + .long sys_mq_open + .long sys_mq_unlink + .long sys_mq_timedsend + .long sys_mq_timedreceive /* 280 */ + .long sys_mq_notify + .long sys_mq_getsetattr + .long sys_ni_syscall + .long sys_waitid + .long sys_ni_syscall /* 285 */ /* available */ + .long sys_add_key + .long sys_request_key + .long sys_keyctl + .long sys_ioprio_set + .long sys_ioprio_get /* 290 */ + .long sys_inotify_init + .long sys_inotify_add_watch + .long sys_inotify_rm_watch + .long sys_migrate_pages + .long sys_openat /* 295 */ + .long sys_mkdirat + .long sys_mknodat + .long sys_fchownat + .long sys_futimesat + .long sys_fstatat64 /* 300 */ + .long sys_unlinkat + .long sys_renameat + .long sys_linkat + .long sys_symlinkat + .long sys_readlinkat /* 305 */ + .long sys_fchmodat + .long sys_faccessat + .long sys_pselect6 + .long sys_ppoll + .long sys_unshare /* 310 */ + .long sys_set_robust_list + .long sys_get_robust_list + .long sys_splice + .long sys_sync_file_range + .long sys_tee /* 315 */ + .long sys_vmsplice + .long sys_move_pages + .long sys_getcpu + .long sys_epoll_pwait + .long sys_utimensat /* 320 */ + .long sys_signalfd + .long sys_timerfd_create + .long sys_eventfd + .long sys_fallocate + .long sys_timerfd_settime /* 325 */ + .long sys_timerfd_gettime + .long sys_signalfd4 + .long sys_eventfd2 + .long sys_epoll_create1 + .long sys_dup3 /* 330 */ + .long sys_pipe2 + .long sys_inotify_init1 + .long sys_preadv + .long sys_pwritev + .long sys_setns /* 335 */ + .long sys_name_to_handle_at + .long sys_open_by_handle_at + .long sys_rt_tgsigqueueinfo + .long sys_perf_event_open + .long sys_recvmmsg /* 340 */ + .long sys_accept4 + .long sys_fanotify_init + .long sys_fanotify_mark + .long sys_prlimit64 + .long sys_clock_adjtime /* 345 */ + .long sys_syncfs + .long sys_sendmmsg + .long sys_process_vm_readv + .long sys_process_vm_writev + .long sys_kcmp /* 350 */ + .long sys_finit_module + + /* + * NOTE!! This doesn't have to be exact - we just have + * to make sure we have _enough_ of the "sys_ni_syscall" + * entries. Don't panic if you notice that this hasn't + * been shrunk every time we add a new system call. + */ + + .rept NR_syscalls-(.-sys_call_table)/4 + .long sys_ni_syscall + .endr + diff --git a/kernel/arch/cris/arch-v10/kernel/fasttimer.c b/kernel/arch/cris/arch-v10/kernel/fasttimer.c new file mode 100644 index 000000000..e9298739d --- /dev/null +++ b/kernel/arch/cris/arch-v10/kernel/fasttimer.c @@ -0,0 +1,834 @@ +/* + * linux/arch/cris/kernel/fasttimer.c + * + * Fast timers for ETRAX100/ETRAX100LX + * + * Copyright (C) 2000-2007 Axis Communications AB, Lund, Sweden + */ + +#include <linux/errno.h> +#include <linux/sched.h> +#include <linux/kernel.h> +#include <linux/param.h> +#include <linux/string.h> +#include <linux/mm.h> +#include <linux/vmalloc.h> +#include <linux/interrupt.h> +#include <linux/time.h> +#include <linux/delay.h> + +#include <asm/segment.h> +#include <asm/io.h> +#include <asm/irq.h> +#include <asm/delay.h> + +#include <arch/svinto.h> +#include <asm/fasttimer.h> +#include <linux/proc_fs.h> +#include <linux/seq_file.h> + + +#define DEBUG_LOG_INCLUDED +#define FAST_TIMER_LOG +/* #define FAST_TIMER_TEST */ + +#define FAST_TIMER_SANITY_CHECKS + +#ifdef FAST_TIMER_SANITY_CHECKS +static int sanity_failed; +#endif + +#define D1(x) +#define D2(x) +#define DP(x) + +static unsigned int fast_timer_running; +static unsigned int fast_timers_added; +static unsigned int fast_timers_started; +static unsigned int fast_timers_expired; +static unsigned int fast_timers_deleted; +static unsigned int fast_timer_is_init; +static unsigned int fast_timer_ints; + +struct fast_timer *fast_timer_list = NULL; + +#ifdef DEBUG_LOG_INCLUDED +#define DEBUG_LOG_MAX 128 +static const char * debug_log_string[DEBUG_LOG_MAX]; +static unsigned long debug_log_value[DEBUG_LOG_MAX]; +static unsigned int debug_log_cnt; +static unsigned int debug_log_cnt_wrapped; + +#define DEBUG_LOG(string, value) \ +{ \ + unsigned long log_flags; \ + local_irq_save(log_flags); \ + debug_log_string[debug_log_cnt] = (string); \ + debug_log_value[debug_log_cnt] = (unsigned long)(value); \ + if (++debug_log_cnt >= DEBUG_LOG_MAX) \ + { \ + debug_log_cnt = debug_log_cnt % DEBUG_LOG_MAX; \ + debug_log_cnt_wrapped = 1; \ + } \ + local_irq_restore(log_flags); \ +} +#else +#define DEBUG_LOG(string, value) +#endif + + +/* The frequencies for index = clkselx number in R_TIMER_CTRL */ +#define NUM_TIMER_FREQ 15 +#define MAX_USABLE_TIMER_FREQ 7 +#define MAX_DELAY_US 853333L +const unsigned long timer_freq_100[NUM_TIMER_FREQ] = +{ + 3, /* 0 3333 - 853333 us */ + 6, /* 1 1666 - 426666 us */ + 12, /* 2 833 - 213333 us */ + 24, /* 3 416 - 106666 us */ + 48, /* 4 208 - 53333 us */ + 96, /* 5 104 - 26666 us */ + 192, /* 6 52 - 13333 us */ + 384, /* 7 26 - 6666 us */ + 576, + 1152, + 2304, + 4608, + 9216, + 18432, + 62500, + /* 15 = cascade */ +}; +#define NUM_TIMER_STATS 16 +#ifdef FAST_TIMER_LOG +struct fast_timer timer_added_log[NUM_TIMER_STATS]; +struct fast_timer timer_started_log[NUM_TIMER_STATS]; +struct fast_timer timer_expired_log[NUM_TIMER_STATS]; +#endif + +int timer_div_settings[NUM_TIMER_STATS]; +int timer_freq_settings[NUM_TIMER_STATS]; +int timer_delay_settings[NUM_TIMER_STATS]; + +/* Not true gettimeofday, only checks the jiffies (uptime) + useconds */ +inline void do_gettimeofday_fast(struct fasttime_t *tv) +{ + tv->tv_jiff = jiffies; + tv->tv_usec = GET_JIFFIES_USEC(); +} + +inline int fasttime_cmp(struct fasttime_t *t0, struct fasttime_t *t1) +{ + /* Compare jiffies. Takes care of wrapping */ + if (time_before(t0->tv_jiff, t1->tv_jiff)) + return -1; + else if (time_after(t0->tv_jiff, t1->tv_jiff)) + return 1; + + /* Compare us */ + if (t0->tv_usec < t1->tv_usec) + return -1; + else if (t0->tv_usec > t1->tv_usec) + return 1; + return 0; +} + +inline void start_timer1(unsigned long delay_us) +{ + int freq_index = 0; /* This is the lowest resolution */ + unsigned long upper_limit = MAX_DELAY_US; + + unsigned long div; + /* Start/Restart the timer to the new shorter value */ + /* t = 1/freq = 1/19200 = 53us + * T=div*t, div = T/t = delay_us*freq/1000000 + */ +#if 1 /* Adaptive timer settings */ + while (delay_us < upper_limit && freq_index < MAX_USABLE_TIMER_FREQ) + { + freq_index++; + upper_limit >>= 1; /* Divide by 2 using shift */ + } + if (freq_index > 0) + { + freq_index--; + } +#else + freq_index = 6; +#endif + div = delay_us * timer_freq_100[freq_index]/10000; + if (div < 2) + { + /* Maybe increase timer freq? */ + div = 2; + } + if (div > 255) + { + div = 0; /* This means 256, the max the timer takes */ + /* If a longer timeout than the timer can handle is used, + * then we must restart it when it goes off. + */ + } + + timer_div_settings[fast_timers_started % NUM_TIMER_STATS] = div; + timer_freq_settings[fast_timers_started % NUM_TIMER_STATS] = freq_index; + timer_delay_settings[fast_timers_started % NUM_TIMER_STATS] = delay_us; + + D1(printk(KERN_DEBUG "start_timer1 : %d us freq: %i div: %i\n", + delay_us, freq_index, div)); + /* Clear timer1 irq */ + *R_IRQ_MASK0_CLR = IO_STATE(R_IRQ_MASK0_CLR, timer1, clr); + + /* Set timer values */ + *R_TIMER_CTRL = r_timer_ctrl_shadow = + (r_timer_ctrl_shadow & + ~IO_MASK(R_TIMER_CTRL, timerdiv1) & + ~IO_MASK(R_TIMER_CTRL, tm1) & + ~IO_MASK(R_TIMER_CTRL, clksel1)) | + IO_FIELD(R_TIMER_CTRL, timerdiv1, div) | + IO_STATE(R_TIMER_CTRL, tm1, stop_ld) | + IO_FIELD(R_TIMER_CTRL, clksel1, freq_index ); /* 6=c19k2Hz */ + + /* Ack interrupt */ + *R_TIMER_CTRL = r_timer_ctrl_shadow | + IO_STATE(R_TIMER_CTRL, i1, clr); + + /* Start timer */ + *R_TIMER_CTRL = r_timer_ctrl_shadow = + (r_timer_ctrl_shadow & ~IO_MASK(R_TIMER_CTRL, tm1)) | + IO_STATE(R_TIMER_CTRL, tm1, run); + + /* Enable timer1 irq */ + *R_IRQ_MASK0_SET = IO_STATE(R_IRQ_MASK0_SET, timer1, set); + fast_timers_started++; + fast_timer_running = 1; +} + +/* In version 1.4 this function takes 27 - 50 us */ +void start_one_shot_timer(struct fast_timer *t, + fast_timer_function_type *function, + unsigned long data, + unsigned long delay_us, + const char *name) +{ + unsigned long flags; + struct fast_timer *tmp; + + D1(printk("sft %s %d us\n", name, delay_us)); + + local_irq_save(flags); + + do_gettimeofday_fast(&t->tv_set); + tmp = fast_timer_list; + +#ifdef FAST_TIMER_SANITY_CHECKS + /* Check so this is not in the list already... */ + while (tmp != NULL) { + if (tmp == t) { + printk(KERN_WARNING "timer name: %s data: " + "0x%08lX already in list!\n", name, data); + sanity_failed++; + goto done; + } else + tmp = tmp->next; + } + tmp = fast_timer_list; +#endif + + t->delay_us = delay_us; + t->function = function; + t->data = data; + t->name = name; + + t->tv_expires.tv_usec = t->tv_set.tv_usec + delay_us % 1000000; + t->tv_expires.tv_jiff = t->tv_set.tv_jiff + delay_us / 1000000 / HZ; + if (t->tv_expires.tv_usec > 1000000) + { + t->tv_expires.tv_usec -= 1000000; + t->tv_expires.tv_jiff += HZ; + } +#ifdef FAST_TIMER_LOG + timer_added_log[fast_timers_added % NUM_TIMER_STATS] = *t; +#endif + fast_timers_added++; + + /* Check if this should timeout before anything else */ + if (tmp == NULL || fasttime_cmp(&t->tv_expires, &tmp->tv_expires) < 0) + { + /* Put first in list and modify the timer value */ + t->prev = NULL; + t->next = fast_timer_list; + if (fast_timer_list) + { + fast_timer_list->prev = t; + } + fast_timer_list = t; +#ifdef FAST_TIMER_LOG + timer_started_log[fast_timers_started % NUM_TIMER_STATS] = *t; +#endif + start_timer1(delay_us); + } else { + /* Put in correct place in list */ + while (tmp->next && fasttime_cmp(&t->tv_expires, + &tmp->next->tv_expires) > 0) + { + tmp = tmp->next; + } + /* Insert t after tmp */ + t->prev = tmp; + t->next = tmp->next; + if (tmp->next) + { + tmp->next->prev = t; + } + tmp->next = t; + } + + D2(printk("start_one_shot_timer: %d us done\n", delay_us)); + +done: + local_irq_restore(flags); +} /* start_one_shot_timer */ + +static inline int fast_timer_pending (const struct fast_timer * t) +{ + return (t->next != NULL) || (t->prev != NULL) || (t == fast_timer_list); +} + +static inline int detach_fast_timer (struct fast_timer *t) +{ + struct fast_timer *next, *prev; + if (!fast_timer_pending(t)) + return 0; + next = t->next; + prev = t->prev; + if (next) + next->prev = prev; + if (prev) + prev->next = next; + else + fast_timer_list = next; + fast_timers_deleted++; + return 1; +} + +int del_fast_timer(struct fast_timer * t) +{ + unsigned long flags; + int ret; + + local_irq_save(flags); + ret = detach_fast_timer(t); + t->next = t->prev = NULL; + local_irq_restore(flags); + return ret; +} /* del_fast_timer */ + + +/* Interrupt routines or functions called in interrupt context */ + +/* Timer 1 interrupt handler */ + +static irqreturn_t +timer1_handler(int irq, void *dev_id) +{ + struct fast_timer *t; + unsigned long flags; + + /* We keep interrupts disabled not only when we modify the + * fast timer list, but any time we hold a reference to a + * timer in the list, since del_fast_timer may be called + * from (another) interrupt context. Thus, the only time + * when interrupts are enabled is when calling the timer + * callback function. + */ + local_irq_save(flags); + + /* Clear timer1 irq */ + *R_IRQ_MASK0_CLR = IO_STATE(R_IRQ_MASK0_CLR, timer1, clr); + + /* First stop timer, then ack interrupt */ + /* Stop timer */ + *R_TIMER_CTRL = r_timer_ctrl_shadow = + (r_timer_ctrl_shadow & ~IO_MASK(R_TIMER_CTRL, tm1)) | + IO_STATE(R_TIMER_CTRL, tm1, stop_ld); + + /* Ack interrupt */ + *R_TIMER_CTRL = r_timer_ctrl_shadow | IO_STATE(R_TIMER_CTRL, i1, clr); + + fast_timer_running = 0; + fast_timer_ints++; + + t = fast_timer_list; + while (t) + { + struct fasttime_t tv; + fast_timer_function_type *f; + unsigned long d; + + /* Has it really expired? */ + do_gettimeofday_fast(&tv); + D1(printk(KERN_DEBUG "t: %is %06ius\n", + tv.tv_jiff, tv.tv_usec)); + + if (fasttime_cmp(&t->tv_expires, &tv) <= 0) + { + /* Yes it has expired */ +#ifdef FAST_TIMER_LOG + timer_expired_log[fast_timers_expired % NUM_TIMER_STATS] = *t; +#endif + fast_timers_expired++; + + /* Remove this timer before call, since it may reuse the timer */ + if (t->prev) + { + t->prev->next = t->next; + } + else + { + fast_timer_list = t->next; + } + if (t->next) + { + t->next->prev = t->prev; + } + t->prev = NULL; + t->next = NULL; + + /* Save function callback data before enabling + * interrupts, since the timer may be removed and + * we don't know how it was allocated + * (e.g. ->function and ->data may become overwritten + * after deletion if the timer was stack-allocated). + */ + f = t->function; + d = t->data; + + if (f != NULL) { + /* Run callback with interrupts enabled. */ + local_irq_restore(flags); + f(d); + local_irq_save(flags); + } else + DEBUG_LOG("!timer1 %i function==NULL!\n", fast_timer_ints); + } + else + { + /* Timer is to early, let's set it again using the normal routines */ + D1(printk(".\n")); + } + + if ((t = fast_timer_list) != NULL) + { + /* Start next timer.. */ + long us = 0; + struct fasttime_t tv; + + do_gettimeofday_fast(&tv); + + /* time_after_eq takes care of wrapping */ + if (time_after_eq(t->tv_expires.tv_jiff, tv.tv_jiff)) + us = ((t->tv_expires.tv_jiff - tv.tv_jiff) * + 1000000 / HZ + t->tv_expires.tv_usec - + tv.tv_usec); + + if (us > 0) + { + if (!fast_timer_running) + { +#ifdef FAST_TIMER_LOG + timer_started_log[fast_timers_started % NUM_TIMER_STATS] = *t; +#endif + start_timer1(us); + } + break; + } + else + { + /* Timer already expired, let's handle it better late than never. + * The normal loop handles it + */ + D1(printk("e! %d\n", us)); + } + } + } + + local_irq_restore(flags); + + if (!t) + { + D1(printk("t1 stop!\n")); + } + + return IRQ_HANDLED; +} + +static void wake_up_func(unsigned long data) +{ + wait_queue_head_t *sleep_wait_p = (wait_queue_head_t *)data; + wake_up(sleep_wait_p); +} + + +/* Useful API */ + +void schedule_usleep(unsigned long us) +{ + struct fast_timer t; + wait_queue_head_t sleep_wait; + init_waitqueue_head(&sleep_wait); + + D1(printk("schedule_usleep(%d)\n", us)); + start_one_shot_timer(&t, wake_up_func, (unsigned long)&sleep_wait, us, + "usleep"); + /* Uninterruptible sleep on the fast timer. (The condition is somewhat + * redundant since the timer is what wakes us up.) */ + wait_event(sleep_wait, !fast_timer_pending(&t)); + + D1(printk("done schedule_usleep(%d)\n", us)); +} + +#ifdef CONFIG_PROC_FS +/* This value is very much based on testing */ +#define BIG_BUF_SIZE (500 + NUM_TIMER_STATS * 300) + +static int proc_fasttimer_show(struct seq_file *m, void *v) +{ + unsigned long flags; + int i = 0; + int num_to_show; + struct fasttime_t tv; + struct fast_timer *t, *nextt; + + do_gettimeofday_fast(&tv); + + seq_printf(m, "Fast timers added: %i\n", fast_timers_added); + seq_printf(m, "Fast timers started: %i\n", fast_timers_started); + seq_printf(m, "Fast timer interrupts: %i\n", fast_timer_ints); + seq_printf(m, "Fast timers expired: %i\n", fast_timers_expired); + seq_printf(m, "Fast timers deleted: %i\n", fast_timers_deleted); + seq_printf(m, "Fast timer running: %s\n", + fast_timer_running ? "yes" : "no"); + seq_printf(m, "Current time: %lu.%06lu\n", + (unsigned long)tv.tv_jiff, + (unsigned long)tv.tv_usec); +#ifdef FAST_TIMER_SANITY_CHECKS + seq_printf(m, "Sanity failed: %i\n", sanity_failed); +#endif + seq_putc(m, '\n'); + +#ifdef DEBUG_LOG_INCLUDED + { + int end_i = debug_log_cnt; + i = 0; + + if (debug_log_cnt_wrapped) + i = debug_log_cnt; + + while (i != end_i || debug_log_cnt_wrapped) { + seq_printf(m, debug_log_string[i], debug_log_value[i]); + if (seq_has_overflowed(m)) + return 0; + i = (i+1) % DEBUG_LOG_MAX; + } + } + seq_putc(m, '\n'); +#endif + + num_to_show = (fast_timers_started < NUM_TIMER_STATS ? fast_timers_started: + NUM_TIMER_STATS); + seq_printf(m, "Timers started: %i\n", fast_timers_started); + for (i = 0; i < num_to_show; i++) { + int cur = (fast_timers_started - i - 1) % NUM_TIMER_STATS; + +#if 1 //ndef FAST_TIMER_LOG + seq_printf(m, "div: %i freq: %i delay: %i\n", + timer_div_settings[cur], + timer_freq_settings[cur], + timer_delay_settings[cur]); +#endif +#ifdef FAST_TIMER_LOG + t = &timer_started_log[cur]; + seq_printf(m, "%-14s s: %6lu.%06lu e: %6lu.%06lu d: %6li us data: 0x%08lX\n", + t->name, + (unsigned long)t->tv_set.tv_jiff, + (unsigned long)t->tv_set.tv_usec, + (unsigned long)t->tv_expires.tv_jiff, + (unsigned long)t->tv_expires.tv_usec, + t->delay_us, + t->data); + if (seq_has_overflowed(m)) + return 0; +#endif + } + seq_putc(m, '\n'); + +#ifdef FAST_TIMER_LOG + num_to_show = (fast_timers_added < NUM_TIMER_STATS ? fast_timers_added: + NUM_TIMER_STATS); + seq_printf(m, "Timers added: %i\n", fast_timers_added); + for (i = 0; i < num_to_show; i++) { + t = &timer_added_log[(fast_timers_added - i - 1) % NUM_TIMER_STATS]; + seq_printf(m, "%-14s s: %6lu.%06lu e: %6lu.%06lu d: %6li us data: 0x%08lX\n", + t->name, + (unsigned long)t->tv_set.tv_jiff, + (unsigned long)t->tv_set.tv_usec, + (unsigned long)t->tv_expires.tv_jiff, + (unsigned long)t->tv_expires.tv_usec, + t->delay_us, + t->data); + if (seq_has_overflowed(m)) + return 0; + } + seq_putc(m, '\n'); + + num_to_show = (fast_timers_expired < NUM_TIMER_STATS ? fast_timers_expired: + NUM_TIMER_STATS); + seq_printf(m, "Timers expired: %i\n", fast_timers_expired); + for (i = 0; i < num_to_show; i++) { + t = &timer_expired_log[(fast_timers_expired - i - 1) % NUM_TIMER_STATS]; + seq_printf(m, "%-14s s: %6lu.%06lu e: %6lu.%06lu d: %6li us data: 0x%08lX\n", + t->name, + (unsigned long)t->tv_set.tv_jiff, + (unsigned long)t->tv_set.tv_usec, + (unsigned long)t->tv_expires.tv_jiff, + (unsigned long)t->tv_expires.tv_usec, + t->delay_us, + t->data); + if (seq_has_overflowed(m)) + return 0; + } + seq_putc(m, '\n'); +#endif + + seq_puts(m, "Active timers:\n"); + local_irq_save(flags); + t = fast_timer_list; + while (t) { + nextt = t->next; + local_irq_restore(flags); + seq_printf(m, "%-14s s: %6lu.%06lu e: %6lu.%06lu d: %6li us data: 0x%08lX\n", + t->name, + (unsigned long)t->tv_set.tv_jiff, + (unsigned long)t->tv_set.tv_usec, + (unsigned long)t->tv_expires.tv_jiff, + (unsigned long)t->tv_expires.tv_usec, + t->delay_us, + t->data); + if (seq_has_overflowed(m)) + return 0; + local_irq_save(flags); + if (t->next != nextt) + printk(KERN_WARNING "timer removed!\n"); + t = nextt; + } + local_irq_restore(flags); + + return 0; +} + +static int proc_fasttimer_open(struct inode *inode, struct file *file) +{ + return single_open_size(file, proc_fasttimer_show, PDE_DATA(inode), BIG_BUF_SIZE); +} + +static const struct file_operations proc_fasttimer_fops = { + .open = proc_fasttimer_open, + .read = seq_read, + .llseek = seq_lseek, + .release = single_release, +}; +#endif /* PROC_FS */ + +#ifdef FAST_TIMER_TEST +static volatile unsigned long i = 0; +static volatile int num_test_timeout = 0; +static struct fast_timer tr[10]; +static int exp_num[10]; + +static struct fasttime_t tv_exp[100]; + +static void test_timeout(unsigned long data) +{ + do_gettimeofday_fast(&tv_exp[data]); + exp_num[data] = num_test_timeout; + + num_test_timeout++; +} + +static void test_timeout1(unsigned long data) +{ + do_gettimeofday_fast(&tv_exp[data]); + exp_num[data] = num_test_timeout; + if (data < 7) + { + start_one_shot_timer(&tr[i], test_timeout1, i, 1000, "timeout1"); + i++; + } + num_test_timeout++; +} + +DP( +static char buf0[2000]; +static char buf1[2000]; +static char buf2[2000]; +static char buf3[2000]; +static char buf4[2000]; +); + +static char buf5[6000]; +static int j_u[1000]; + +static void fast_timer_test(void) +{ + int prev_num; + int j; + + struct fasttime_t tv, tv0, tv1, tv2; + + printk("fast_timer_test() start\n"); + do_gettimeofday_fast(&tv); + + for (j = 0; j < 1000; j++) + { + j_u[j] = GET_JIFFIES_USEC(); + } + for (j = 0; j < 100; j++) + { + do_gettimeofday_fast(&tv_exp[j]); + } + printk(KERN_DEBUG "fast_timer_test() %is %06i\n", + tv.tv_jiff, tv.tv_usec); + + for (j = 0; j < 1000; j++) + { + printk("%i %i %i %i %i\n",j_u[j], j_u[j+1], j_u[j+2], j_u[j+3], j_u[j+4]); + j += 4; + } + for (j = 0; j < 100; j++) + { + printk(KERN_DEBUG "%i.%i %i.%i %i.%i %i.%i %i.%i\n", + tv_exp[j].tv_jiff, tv_exp[j].tv_usec, + tv_exp[j+1].tv_jiff, tv_exp[j+1].tv_usec, + tv_exp[j+2].tv_jiff, tv_exp[j+2].tv_usec, + tv_exp[j+3].tv_jiff, tv_exp[j+3].tv_usec, + tv_exp[j+4].tv_jiff, tv_exp[j+4].tv_usec); + j += 4; + } + do_gettimeofday_fast(&tv0); + start_one_shot_timer(&tr[i], test_timeout, i, 50000, "test0"); + DP(proc_fasttimer_read(buf0, NULL, 0, 0, 0)); + i++; + start_one_shot_timer(&tr[i], test_timeout, i, 70000, "test1"); + DP(proc_fasttimer_read(buf1, NULL, 0, 0, 0)); + i++; + start_one_shot_timer(&tr[i], test_timeout, i, 40000, "test2"); + DP(proc_fasttimer_read(buf2, NULL, 0, 0, 0)); + i++; + start_one_shot_timer(&tr[i], test_timeout, i, 60000, "test3"); + DP(proc_fasttimer_read(buf3, NULL, 0, 0, 0)); + i++; + start_one_shot_timer(&tr[i], test_timeout1, i, 55000, "test4xx"); + DP(proc_fasttimer_read(buf4, NULL, 0, 0, 0)); + i++; + do_gettimeofday_fast(&tv1); + + proc_fasttimer_read(buf5, NULL, 0, 0, 0); + + prev_num = num_test_timeout; + while (num_test_timeout < i) + { + if (num_test_timeout != prev_num) + { + prev_num = num_test_timeout; + } + } + do_gettimeofday_fast(&tv2); + printk(KERN_DEBUG "Timers started %is %06i\n", + tv0.tv_jiff, tv0.tv_usec); + printk(KERN_DEBUG "Timers started at %is %06i\n", + tv1.tv_jiff, tv1.tv_usec); + printk(KERN_DEBUG "Timers done %is %06i\n", + tv2.tv_jiff, tv2.tv_usec); + DP(printk("buf0:\n"); + printk(buf0); + printk("buf1:\n"); + printk(buf1); + printk("buf2:\n"); + printk(buf2); + printk("buf3:\n"); + printk(buf3); + printk("buf4:\n"); + printk(buf4); + ); + printk("buf5:\n"); + printk(buf5); + + printk("timers set:\n"); + for(j = 0; j<i; j++) + { + struct fast_timer *t = &tr[j]; + printk("%-10s set: %6is %06ius exp: %6is %06ius " + "data: 0x%08X func: 0x%08X\n", + t->name, + t->tv_set.tv_jiff, + t->tv_set.tv_usec, + t->tv_expires.tv_jiff, + t->tv_expires.tv_usec, + t->data, + t->function + ); + + printk(" del: %6ius did exp: %6is %06ius as #%i error: %6li\n", + t->delay_us, + tv_exp[j].tv_jiff, + tv_exp[j].tv_usec, + exp_num[j], + (tv_exp[j].tv_jiff - t->tv_expires.tv_jiff) * + 1000000 + tv_exp[j].tv_usec - + t->tv_expires.tv_usec); + } + proc_fasttimer_read(buf5, NULL, 0, 0, 0); + printk("buf5 after all done:\n"); + printk(buf5); + printk("fast_timer_test() done\n"); +} +#endif + + +int fast_timer_init(void) +{ + /* For some reason, request_irq() hangs when called froom time_init() */ + if (!fast_timer_is_init) + { +#if 0 && defined(FAST_TIMER_TEST) + int i; +#endif + + printk(KERN_INFO "fast_timer_init()\n"); + +#if 0 && defined(FAST_TIMER_TEST) + for (i = 0; i <= TIMER0_DIV; i++) + { + /* We must be careful not to get overflow... */ + printk("%3i %6u\n", i, timer0_value_us[i]); + } +#endif +#ifdef CONFIG_PROC_FS + proc_create("fasttimer", 0, NULL, &proc_fasttimer_fops); +#endif /* PROC_FS */ + if(request_irq(TIMER1_IRQ_NBR, timer1_handler, 0, + "fast timer int", NULL)) + { + printk("err: timer1 irq\n"); + } + fast_timer_is_init = 1; +#ifdef FAST_TIMER_TEST + printk("do test\n"); + fast_timer_test(); +#endif + } + return 0; +} +__initcall(fast_timer_init); diff --git a/kernel/arch/cris/arch-v10/kernel/head.S b/kernel/arch/cris/arch-v10/kernel/head.S new file mode 100644 index 000000000..4a146e174 --- /dev/null +++ b/kernel/arch/cris/arch-v10/kernel/head.S @@ -0,0 +1,723 @@ +/* + * Head of the kernel - alter with care + * + * Copyright (C) 2000, 2001, 2010 Axis Communications AB + * + */ + +#define ASSEMBLER_MACROS_ONLY +/* The IO_* macros use the ## token concatenation operator, so + -traditional must not be used when assembling this file. */ +#include <arch/sv_addr_ag.h> + +#define CRAMFS_MAGIC 0x28cd3d45 +#define RAM_INIT_MAGIC 0x56902387 +#define COMMAND_LINE_MAGIC 0x87109563 + +#define START_ETHERNET_CLOCK IO_STATE(R_NETWORK_GEN_CONFIG, enable, on) |\ + IO_STATE(R_NETWORK_GEN_CONFIG, phy, mii_clk) + + ;; exported symbols + + .globl etrax_irv + .globl romfs_start + .globl romfs_length + .globl romfs_in_flash + .globl swapper_pg_dir + + .text + + ;; This is the entry point of the kernel. We are in supervisor mode. + ;; 0x00000000 if Flash, 0x40004000 if DRAM + ;; since etrax actually starts at address 2 when booting from flash, we + ;; put a nop (2 bytes) here first so we dont accidentally skip the di + ;; + ;; NOTICE! The registers r8 and r9 are used as parameters carrying + ;; information from the decompressor (if the kernel was compressed). + ;; They should not be used in the code below until read. + + nop + di + + ;; First setup the kseg_c mapping from where the kernel is linked + ;; to 0x40000000 (where the actual DRAM resides) otherwise + ;; we cannot do very much! See arch/cris/README.mm + ;; + ;; Notice that since we're potentially running at 0x00 or 0x40 right now, + ;; we will get a fault as soon as we enable the MMU if we dont + ;; temporarily map those segments linearily. + ;; + ;; Due to a bug in Etrax-100 LX version 1 we need to map the memory + ;; slightly different. The bug is that you can't remap bit 31 of + ;; an address. Though we can check the version register for + ;; whether the bug is present, some constants would then have to + ;; be variables, so we don't. The drawback is that you can "only" map + ;; 1G per process with CONFIG_CRIS_LOW_MAP. + +#ifdef CONFIG_CRIS_LOW_MAP + ; kseg mappings, temporary map of 0xc0->0x40 + move.d IO_FIELD (R_MMU_KBASE_HI, base_c, 4) \ + | IO_FIELD (R_MMU_KBASE_HI, base_b, 0xb) \ + | IO_FIELD (R_MMU_KBASE_HI, base_9, 9) \ + | IO_FIELD (R_MMU_KBASE_HI, base_8, 8), $r0 + move.d $r0, [R_MMU_KBASE_HI] + + ; temporary map of 0x40->0x40 and 0x60->0x40 + move.d IO_FIELD (R_MMU_KBASE_LO, base_6, 4) \ + | IO_FIELD (R_MMU_KBASE_LO, base_4, 4), $r0 + move.d $r0, [R_MMU_KBASE_LO] + + ; mmu enable, segs e,c,b,a,6,5,4,0 segment mapped + move.d IO_STATE (R_MMU_CONFIG, mmu_enable, enable) \ + | IO_STATE (R_MMU_CONFIG, inv_excp, enable) \ + | IO_STATE (R_MMU_CONFIG, acc_excp, enable) \ + | IO_STATE (R_MMU_CONFIG, we_excp, enable) \ + | IO_STATE (R_MMU_CONFIG, seg_f, page) \ + | IO_STATE (R_MMU_CONFIG, seg_e, seg) \ + | IO_STATE (R_MMU_CONFIG, seg_d, page) \ + | IO_STATE (R_MMU_CONFIG, seg_c, seg) \ + | IO_STATE (R_MMU_CONFIG, seg_b, seg) \ + | IO_STATE (R_MMU_CONFIG, seg_a, seg) \ + | IO_STATE (R_MMU_CONFIG, seg_9, page) \ + | IO_STATE (R_MMU_CONFIG, seg_8, page) \ + | IO_STATE (R_MMU_CONFIG, seg_7, page) \ + | IO_STATE (R_MMU_CONFIG, seg_6, seg) \ + | IO_STATE (R_MMU_CONFIG, seg_5, seg) \ + | IO_STATE (R_MMU_CONFIG, seg_4, seg) \ + | IO_STATE (R_MMU_CONFIG, seg_3, page) \ + | IO_STATE (R_MMU_CONFIG, seg_2, page) \ + | IO_STATE (R_MMU_CONFIG, seg_1, page) \ + | IO_STATE (R_MMU_CONFIG, seg_0, seg), $r0 + move.d $r0, [R_MMU_CONFIG] +#else + ; kseg mappings + move.d IO_FIELD (R_MMU_KBASE_HI, base_e, 8) \ + | IO_FIELD (R_MMU_KBASE_HI, base_c, 4) \ + | IO_FIELD (R_MMU_KBASE_HI, base_b, 0xb), $r0 + move.d $r0, [R_MMU_KBASE_HI] + + ; temporary map of 0x40->0x40 and 0x00->0x00 + move.d IO_FIELD (R_MMU_KBASE_LO, base_4, 4), $r0 + move.d $r0, [R_MMU_KBASE_LO] + + ; mmu enable, segs f,e,c,b,4,0 segment mapped + move.d IO_STATE (R_MMU_CONFIG, mmu_enable, enable) \ + | IO_STATE (R_MMU_CONFIG, inv_excp, enable) \ + | IO_STATE (R_MMU_CONFIG, acc_excp, enable) \ + | IO_STATE (R_MMU_CONFIG, we_excp, enable) \ + | IO_STATE (R_MMU_CONFIG, seg_f, seg) \ + | IO_STATE (R_MMU_CONFIG, seg_e, seg) \ + | IO_STATE (R_MMU_CONFIG, seg_d, page) \ + | IO_STATE (R_MMU_CONFIG, seg_c, seg) \ + | IO_STATE (R_MMU_CONFIG, seg_b, seg) \ + | IO_STATE (R_MMU_CONFIG, seg_a, page) \ + | IO_STATE (R_MMU_CONFIG, seg_9, page) \ + | IO_STATE (R_MMU_CONFIG, seg_8, page) \ + | IO_STATE (R_MMU_CONFIG, seg_7, page) \ + | IO_STATE (R_MMU_CONFIG, seg_6, page) \ + | IO_STATE (R_MMU_CONFIG, seg_5, page) \ + | IO_STATE (R_MMU_CONFIG, seg_4, seg) \ + | IO_STATE (R_MMU_CONFIG, seg_3, page) \ + | IO_STATE (R_MMU_CONFIG, seg_2, page) \ + | IO_STATE (R_MMU_CONFIG, seg_1, page) \ + | IO_STATE (R_MMU_CONFIG, seg_0, seg), $r0 + move.d $r0, [R_MMU_CONFIG] +#endif + + ;; Now we need to sort out the segments and their locations in RAM or + ;; Flash. The image in the Flash (or in DRAM) consists of 3 pieces: + ;; 1) kernel text, 2) kernel data, 3) ROM filesystem image + ;; But the linker has linked the kernel to expect this layout in + ;; DRAM memory: + ;; 1) kernel text, 2) kernel data, 3) kernel BSS + ;; (the location of the ROM filesystem is determined by the krom driver) + ;; If we boot this from Flash, we want to keep the ROM filesystem in + ;; the flash, we want to copy the text and need to copy the data to DRAM. + ;; But if we boot from DRAM, we need to move the ROMFS image + ;; from its position after kernel data, to after kernel BSS, BEFORE the + ;; kernel starts using the BSS area (since its "overlayed" with the ROMFS) + ;; + ;; In both cases, we start in un-cached mode, and need to jump into a + ;; cached PC after we're done fiddling around with the segments. + ;; + ;; arch/etrax100/etrax100.ld sets some symbols that define the start + ;; and end of each segment. + + ;; Check if we start from DRAM or FLASH by testing PC + + move.d $pc,$r0 + and.d 0x7fffffff,$r0 ; get rid of the non-cache bit + cmp.d 0x10000,$r0 ; arbitrary... just something above this code + blo _inflash0 + nop + + jump _inram ; enter cached ram + + ;; Jumpgate for branches. +_inflash0: + jump _inflash + + ;; Put this in a suitable section where we can reclaim storage + ;; after init. + .section ".init.text", "ax" +_inflash: +#ifdef CONFIG_ETRAX_ETHERNET + ;; Start MII clock to make sure it is running when tranceiver is reset + move.d START_ETHERNET_CLOCK, $r0 + move.d $r0, [R_NETWORK_GEN_CONFIG] +#endif + + ;; Set up waitstates etc according to kernel configuration. + move.d CONFIG_ETRAX_DEF_R_WAITSTATES, $r0 + move.d $r0, [R_WAITSTATES] + + move.d CONFIG_ETRAX_DEF_R_BUS_CONFIG, $r0 + move.d $r0, [R_BUS_CONFIG] + + ;; We need to initialze DRAM registers before we start using the DRAM + + cmp.d RAM_INIT_MAGIC, $r8 ; Already initialized? + beq _dram_init_finished + nop + +#include "../lib/dram_init.S" + +_dram_init_finished: + ;; Copy text+data to DRAM + ;; This is fragile - the calculation of r4 as the image size depends + ;; on that the labels below actually are the first and last positions + ;; in the linker-script. + ;; + ;; Then the locating of the cramfs image depends on the aforementioned + ;; image being located in the flash at 0. This is most often not true, + ;; thus the following does not work (normally there is a rescue-block + ;; between the physical start of the flash and the flash-image start, + ;; and when run with compression, the kernel is actually unpacked to + ;; DRAM and we never get here in the first place :)) + + moveq 0, $r0 ; source + move.d text_start, $r1 ; destination + move.d __vmlinux_end, $r2 ; end destination + move.d $r2, $r4 + sub.d $r1, $r4 ; r4=__vmlinux_end in flash, used below +1: move.w [$r0+], $r3 + move.w $r3, [$r1+] + cmp.d $r2, $r1 + blo 1b + nop + + ;; We keep the cramfs in the flash. + ;; There might be none, but that does not matter because + ;; we don't do anything than read some bytes here. + + moveq 0, $r0 + move.d $r0, [romfs_length] ; default if there is no cramfs + + move.d [$r4], $r0 ; cramfs_super.magic + cmp.d CRAMFS_MAGIC, $r0 + bne 1f + nop + move.d [$r4 + 4], $r0 ; cramfs_super.size + move.d $r0, [romfs_length] +#ifdef CONFIG_CRIS_LOW_MAP + add.d 0x50000000, $r4 ; add flash start in virtual memory (cached) +#else + add.d 0xf0000000, $r4 ; add flash start in virtual memory (cached) +#endif + move.d $r4, [romfs_start] +1: + moveq 1, $r0 + move.d $r0, [romfs_in_flash] + + jump _start_it ; enter code, cached this time + +_inram: + ;; Move the ROM fs to after BSS end. This assumes that the cramfs + ;; second longword contains the length of the cramfs + + moveq 0, $r0 + move.d $r0, [romfs_length] ; default if there is no cramfs + + ;; The kernel could have been unpacked to DRAM by the loader, but + ;; the cramfs image could still be in the Flash directly after the + ;; compressed kernel image. The loader passes the address of the + ;; byte succeeding the last compressed byte in the flash in the + ;; register r9 when starting the kernel. Check if r9 points to a + ;; decent cramfs image! + ;; (Notice that if this is not booted from the loader, r9 will be + ;; garbage but we do sanity checks on it, the chance that it points + ;; to a cramfs magic is small.. ) + + cmp.d 0x0ffffff8, $r9 + bhs _no_romfs_in_flash ; r9 points outside the flash area + nop + move.d [$r9], $r0 ; cramfs_super.magic + cmp.d CRAMFS_MAGIC, $r0 + bne _no_romfs_in_flash + nop + move.d [$r9+4], $r0 ; cramfs_super.length + move.d $r0, [romfs_length] +#ifdef CONFIG_CRIS_LOW_MAP + add.d 0x50000000, $r9 ; add flash start in virtual memory (cached) +#else + add.d 0xf0000000, $r9 ; add flash start in virtual memory (cached) +#endif + move.d $r9, [romfs_start] + + moveq 1, $r0 + move.d $r0, [romfs_in_flash] + + jump _start_it ; enter code, cached this time + +_no_romfs_in_flash: + + ;; Check if there is a cramfs (magic value). + ;; Notice that we check for cramfs magic value - which is + ;; the "rom fs" we'll possibly use in 2.4 if not JFFS (which does + ;; not need this mechanism anyway) + + move.d __init_end, $r0; the image will be after the end of init + move.d [$r0], $r1 ; cramfs assumes same endian on host/target + cmp.d CRAMFS_MAGIC, $r1; magic value in cramfs superblock + bne 2f + nop + + ;; Ok. What is its size ? + + move.d [$r0 + 4], $r2 ; cramfs_super.size (again, no need to swapwb) + + ;; We want to copy it to the end of the BSS + + move.d _end, $r1 + + ;; Remember values so cramfs and setup can find this info + + move.d $r1, [romfs_start] ; new romfs location + move.d $r2, [romfs_length] + + ;; We need to copy it backwards, since they can be overlapping + + add.d $r2, $r0 + add.d $r2, $r1 + + ;; Go ahead. Make my loop. + + lsrq 1, $r2 ; size is in bytes, we copy words + +1: move.w [$r0=$r0-2],$r3 + move.w $r3,[$r1=$r1-2] + subq 1, $r2 + bne 1b + nop + +2: + ;; Dont worry that the BSS is tainted. It will be cleared later. + + moveq 0, $r0 + move.d $r0, [romfs_in_flash] + + jump _start_it ; better skip the additional cramfs check below + +_start_it: + + ;; Check if kernel command line is supplied + cmp.d COMMAND_LINE_MAGIC, $r10 + bne no_command_line + nop + + move.d 256, $r13 + move.d cris_command_line, $r10 + or.d 0x80000000, $r11 ; Make it virtual +1: + move.b [$r11+], $r12 + move.b $r12, [$r10+] + subq 1, $r13 + bne 1b + nop + +no_command_line: + + ;; the kernel stack is overlayed with the task structure for each + ;; task. thus the initial kernel stack is in the same page as the + ;; init_task (but starts in the top of the page, size 8192) + move.d init_thread_union + 8192, $sp + move.d ibr_start,$r0 ; this symbol is set by the linker script + move $r0,$ibr + move.d $r0,[etrax_irv] ; set the interrupt base register and pointer + + ;; Clear BSS region, from _bss_start to _end + + move.d __bss_start, $r0 + move.d _end, $r1 +1: clear.d [$r0+] + cmp.d $r1, $r0 + blo 1b + nop + +#ifdef CONFIG_BLK_DEV_ETRAXIDE + ;; disable ATA before enabling it in genconfig below + moveq 0,$r0 + move.d $r0,[R_ATA_CTRL_DATA] + move.d $r0,[R_ATA_TRANSFER_CNT] + move.d $r0,[R_ATA_CONFIG] +#if 0 + move.d R_PORT_G_DATA, $r1 + move.d $r0, [$r1]; assert ATA bus-reset + nop + nop + nop + nop + nop + nop + move.d 0x08000000,$r0 + move.d $r0,[$r1] +#endif +#endif + +#ifdef CONFIG_JULIETTE + ;; configure external DMA channel 0 before enabling it in genconfig + + moveq 0,$r0 + move.d $r0,[R_EXT_DMA_0_ADDR] + ; cnt enable, word size, output, stop, size 0 + move.d IO_STATE (R_EXT_DMA_0_CMD, cnt, enable) \ + | IO_STATE (R_EXT_DMA_0_CMD, rqpol, ahigh) \ + | IO_STATE (R_EXT_DMA_0_CMD, apol, ahigh) \ + | IO_STATE (R_EXT_DMA_0_CMD, rq_ack, burst) \ + | IO_STATE (R_EXT_DMA_0_CMD, wid, word) \ + | IO_STATE (R_EXT_DMA_0_CMD, dir, output) \ + | IO_STATE (R_EXT_DMA_0_CMD, run, stop) \ + | IO_FIELD (R_EXT_DMA_0_CMD, trf_count, 0),$r0 + move.d $r0,[R_EXT_DMA_0_CMD] + + ;; reset dma4 and wait for completion + + moveq IO_STATE (R_DMA_CH4_CMD, cmd, reset),$r0 + move.b $r0,[R_DMA_CH4_CMD] +1: move.b [R_DMA_CH4_CMD],$r0 + and.b IO_MASK (R_DMA_CH4_CMD, cmd),$r0 + cmp.b IO_STATE (R_DMA_CH4_CMD, cmd, reset),$r0 + beq 1b + nop + + ;; reset dma5 and wait for completion + + moveq IO_STATE (R_DMA_CH5_CMD, cmd, reset),$r0 + move.b $r0,[R_DMA_CH5_CMD] +1: move.b [R_DMA_CH5_CMD],$r0 + and.b IO_MASK (R_DMA_CH5_CMD, cmd),$r0 + cmp.b IO_STATE (R_DMA_CH5_CMD, cmd, reset),$r0 + beq 1b + nop +#endif + + ;; Etrax product HW genconfig setup + + moveq 0,$r0 + + ;; Select or disable serial port 2 +#ifdef CONFIG_ETRAX_SERIAL_PORT2 + or.d IO_STATE (R_GEN_CONFIG, ser2, select),$r0 +#else + or.d IO_STATE (R_GEN_CONFIG, ser2, disable),$r0 +#endif + + ;; Init interfaces (disable them). + or.d IO_STATE (R_GEN_CONFIG, scsi0, disable) \ + | IO_STATE (R_GEN_CONFIG, ata, disable) \ + | IO_STATE (R_GEN_CONFIG, par0, disable) \ + | IO_STATE (R_GEN_CONFIG, mio, disable) \ + | IO_STATE (R_GEN_CONFIG, scsi1, disable) \ + | IO_STATE (R_GEN_CONFIG, scsi0w, disable) \ + | IO_STATE (R_GEN_CONFIG, par1, disable) \ + | IO_STATE (R_GEN_CONFIG, ser3, disable) \ + | IO_STATE (R_GEN_CONFIG, mio_w, disable) \ + | IO_STATE (R_GEN_CONFIG, usb1, disable) \ + | IO_STATE (R_GEN_CONFIG, usb2, disable) \ + | IO_STATE (R_GEN_CONFIG, par_w, disable),$r0 + + ;; Init DMA channel muxing (set to unused clients). + or.d IO_STATE (R_GEN_CONFIG, dma2, ata) \ + | IO_STATE (R_GEN_CONFIG, dma3, ata) \ + | IO_STATE (R_GEN_CONFIG, dma4, scsi1) \ + | IO_STATE (R_GEN_CONFIG, dma5, scsi1) \ + | IO_STATE (R_GEN_CONFIG, dma6, unused) \ + | IO_STATE (R_GEN_CONFIG, dma7, unused) \ + | IO_STATE (R_GEN_CONFIG, dma8, usb) \ + | IO_STATE (R_GEN_CONFIG, dma9, usb),$r0 + + +#if defined(CONFIG_ETRAX_DEF_R_PORT_G0_DIR_OUT) + or.d IO_STATE (R_GEN_CONFIG, g0dir, out),$r0 +#endif + +#if defined(CONFIG_ETRAX_DEF_R_PORT_G8_15_DIR_OUT) + or.d IO_STATE (R_GEN_CONFIG, g8_15dir, out),$r0 +#endif +#if defined(CONFIG_ETRAX_DEF_R_PORT_G16_23_DIR_OUT) + or.d IO_STATE (R_GEN_CONFIG, g16_23dir, out),$r0 +#endif + +#if defined(CONFIG_ETRAX_DEF_R_PORT_G24_DIR_OUT) + or.d IO_STATE (R_GEN_CONFIG, g24dir, out),$r0 +#endif + + move.d $r0,[genconfig_shadow] ; init a shadow register of R_GEN_CONFIG + + move.d $r0,[R_GEN_CONFIG] + +#if 0 + moveq 4,$r0 + move.b $r0,[R_DMA_CH6_CMD] ; reset (ser0 dma out) + move.b $r0,[R_DMA_CH7_CMD] ; reset (ser0 dma in) +1: move.b [R_DMA_CH6_CMD],$r0 ; wait for reset cycle to finish + and.b 7,$r0 + cmp.b 4,$r0 + beq 1b + nop +1: move.b [R_DMA_CH7_CMD],$r0 ; wait for reset cycle to finish + and.b 7,$r0 + cmp.b 4,$r0 + beq 1b + nop +#endif + + moveq IO_STATE (R_DMA_CH8_CMD, cmd, reset),$r0 + move.b $r0,[R_DMA_CH8_CMD] ; reset (ser1 dma out) + move.b $r0,[R_DMA_CH9_CMD] ; reset (ser1 dma in) +1: move.b [R_DMA_CH8_CMD],$r0 ; wait for reset cycle to finish + andq IO_MASK (R_DMA_CH8_CMD, cmd),$r0 + cmpq IO_STATE (R_DMA_CH8_CMD, cmd, reset),$r0 + beq 1b + nop +1: move.b [R_DMA_CH9_CMD],$r0 ; wait for reset cycle to finish + andq IO_MASK (R_DMA_CH9_CMD, cmd),$r0 + cmpq IO_STATE (R_DMA_CH9_CMD, cmd, reset),$r0 + beq 1b + nop + + ;; setup port PA and PB default initial directions and data + ;; including their shadow registers + + move.b CONFIG_ETRAX_DEF_R_PORT_PA_DIR,$r0 +#if defined(CONFIG_BLUETOOTH) && defined(CONFIG_BLUETOOTH_RESET_PA7) + or.b IO_STATE (R_PORT_PA_DIR, dir7, output),$r0 +#endif + move.b $r0,[port_pa_dir_shadow] + move.b $r0,[R_PORT_PA_DIR] + move.b CONFIG_ETRAX_DEF_R_PORT_PA_DATA,$r0 +#if defined(CONFIG_BLUETOOTH) && defined(CONFIG_BLUETOOTH_RESET_PA7) +#if defined(CONFIG_BLUETOOTH_RESET_ACTIVE_HIGH) + and.b ~(1 << 7),$r0 +#else + or.b (1 << 7),$r0 +#endif +#endif + move.b $r0,[port_pa_data_shadow] + move.b $r0,[R_PORT_PA_DATA] + + move.b CONFIG_ETRAX_DEF_R_PORT_PB_CONFIG,$r0 + move.b $r0,[port_pb_config_shadow] + move.b $r0,[R_PORT_PB_CONFIG] + move.b CONFIG_ETRAX_DEF_R_PORT_PB_DIR,$r0 +#if defined(CONFIG_BLUETOOTH) && defined(CONFIG_BLUETOOTH_RESET_PB5) + or.b IO_STATE (R_PORT_PB_DIR, dir5, output),$r0 +#endif + move.b $r0,[port_pb_dir_shadow] + move.b $r0,[R_PORT_PB_DIR] + move.b CONFIG_ETRAX_DEF_R_PORT_PB_DATA,$r0 +#if defined(CONFIG_BLUETOOTH) && defined(CONFIG_BLUETOOTH_RESET_PB5) +#if defined(CONFIG_BLUETOOTH_RESET_ACTIVE_HIGH) + and.b ~(1 << 5),$r0 +#else + or.b (1 << 5),$r0 +#endif +#endif + move.b $r0,[port_pb_data_shadow] + move.b $r0,[R_PORT_PB_DATA] + + moveq 0, $r0 + move.d $r0,[port_pb_i2c_shadow] + move.d $r0, [R_PORT_PB_I2C] + + moveq 0,$r0 +#if defined(CONFIG_BLUETOOTH) && defined(CONFIG_BLUETOOTH_RESET_G10) +#if defined(CONFIG_BLUETOOTH_RESET_ACTIVE_HIGH) + and.d ~(1 << 10),$r0 +#else + or.d (1 << 10),$r0 +#endif +#endif +#if defined(CONFIG_BLUETOOTH) && defined(CONFIG_BLUETOOTH_RESET_G11) +#if defined(CONFIG_BLUETOOTH_RESET_ACTIVE_HIGH) + and.d ~(1 << 11),$r0 +#else + or.d (1 << 11),$r0 +#endif +#endif + move.d $r0,[port_g_data_shadow] + move.d $r0,[R_PORT_G_DATA] + + ;; setup the serial port 0 at 115200 baud for debug purposes + + moveq IO_STATE (R_SERIAL0_XOFF, tx_stop, enable) \ + | IO_STATE (R_SERIAL0_XOFF, auto_xoff, disable) \ + | IO_FIELD (R_SERIAL0_XOFF, xoff_char, 0),$r0 + move.d $r0,[R_SERIAL0_XOFF] + + ; 115.2kbaud for both transmit and receive + move.b IO_STATE (R_SERIAL0_BAUD, tr_baud, c115k2Hz) \ + | IO_STATE (R_SERIAL0_BAUD, rec_baud, c115k2Hz),$r0 + move.b $r0,[R_SERIAL0_BAUD] + + ; Set up and enable the serial0 receiver. + move.b IO_STATE (R_SERIAL0_REC_CTRL, dma_err, stop) \ + | IO_STATE (R_SERIAL0_REC_CTRL, rec_enable, enable) \ + | IO_STATE (R_SERIAL0_REC_CTRL, rts_, active) \ + | IO_STATE (R_SERIAL0_REC_CTRL, sampling, middle) \ + | IO_STATE (R_SERIAL0_REC_CTRL, rec_stick_par, normal) \ + | IO_STATE (R_SERIAL0_REC_CTRL, rec_par, even) \ + | IO_STATE (R_SERIAL0_REC_CTRL, rec_par_en, disable) \ + | IO_STATE (R_SERIAL0_REC_CTRL, rec_bitnr, rec_8bit),$r0 + move.b $r0,[R_SERIAL0_REC_CTRL] + + ; Set up and enable the serial0 transmitter. + move.b IO_FIELD (R_SERIAL0_TR_CTRL, txd, 0) \ + | IO_STATE (R_SERIAL0_TR_CTRL, tr_enable, enable) \ + | IO_STATE (R_SERIAL0_TR_CTRL, auto_cts, disabled) \ + | IO_STATE (R_SERIAL0_TR_CTRL, stop_bits, one_bit) \ + | IO_STATE (R_SERIAL0_TR_CTRL, tr_stick_par, normal) \ + | IO_STATE (R_SERIAL0_TR_CTRL, tr_par, even) \ + | IO_STATE (R_SERIAL0_TR_CTRL, tr_par_en, disable) \ + | IO_STATE (R_SERIAL0_TR_CTRL, tr_bitnr, tr_8bit),$r0 + move.b $r0,[R_SERIAL0_TR_CTRL] + + ;; setup the serial port 1 at 115200 baud for debug purposes + + moveq IO_STATE (R_SERIAL1_XOFF, tx_stop, enable) \ + | IO_STATE (R_SERIAL1_XOFF, auto_xoff, disable) \ + | IO_FIELD (R_SERIAL1_XOFF, xoff_char, 0),$r0 + move.d $r0,[R_SERIAL1_XOFF] + + ; 115.2kbaud for both transmit and receive + move.b IO_STATE (R_SERIAL1_BAUD, tr_baud, c115k2Hz) \ + | IO_STATE (R_SERIAL1_BAUD, rec_baud, c115k2Hz),$r0 + move.b $r0,[R_SERIAL1_BAUD] + + ; Set up and enable the serial1 receiver. + move.b IO_STATE (R_SERIAL1_REC_CTRL, dma_err, stop) \ + | IO_STATE (R_SERIAL1_REC_CTRL, rec_enable, enable) \ + | IO_STATE (R_SERIAL1_REC_CTRL, rts_, active) \ + | IO_STATE (R_SERIAL1_REC_CTRL, sampling, middle) \ + | IO_STATE (R_SERIAL1_REC_CTRL, rec_stick_par, normal) \ + | IO_STATE (R_SERIAL1_REC_CTRL, rec_par, even) \ + | IO_STATE (R_SERIAL1_REC_CTRL, rec_par_en, disable) \ + | IO_STATE (R_SERIAL1_REC_CTRL, rec_bitnr, rec_8bit),$r0 + move.b $r0,[R_SERIAL1_REC_CTRL] + + ; Set up and enable the serial1 transmitter. + move.b IO_FIELD (R_SERIAL1_TR_CTRL, txd, 0) \ + | IO_STATE (R_SERIAL1_TR_CTRL, tr_enable, enable) \ + | IO_STATE (R_SERIAL1_TR_CTRL, auto_cts, disabled) \ + | IO_STATE (R_SERIAL1_TR_CTRL, stop_bits, one_bit) \ + | IO_STATE (R_SERIAL1_TR_CTRL, tr_stick_par, normal) \ + | IO_STATE (R_SERIAL1_TR_CTRL, tr_par, even) \ + | IO_STATE (R_SERIAL1_TR_CTRL, tr_par_en, disable) \ + | IO_STATE (R_SERIAL1_TR_CTRL, tr_bitnr, tr_8bit),$r0 + move.b $r0,[R_SERIAL1_TR_CTRL] + +#ifdef CONFIG_ETRAX_SERIAL_PORT2 + ;; setup the serial port 2 at 115200 baud for debug purposes + + moveq IO_STATE (R_SERIAL2_XOFF, tx_stop, enable) \ + | IO_STATE (R_SERIAL2_XOFF, auto_xoff, disable) \ + | IO_FIELD (R_SERIAL2_XOFF, xoff_char, 0),$r0 + move.d $r0,[R_SERIAL2_XOFF] + + ; 115.2kbaud for both transmit and receive + move.b IO_STATE (R_SERIAL2_BAUD, tr_baud, c115k2Hz) \ + | IO_STATE (R_SERIAL2_BAUD, rec_baud, c115k2Hz),$r0 + move.b $r0,[R_SERIAL2_BAUD] + + ; Set up and enable the serial2 receiver. + move.b IO_STATE (R_SERIAL2_REC_CTRL, dma_err, stop) \ + | IO_STATE (R_SERIAL2_REC_CTRL, rec_enable, enable) \ + | IO_STATE (R_SERIAL2_REC_CTRL, rts_, active) \ + | IO_STATE (R_SERIAL2_REC_CTRL, sampling, middle) \ + | IO_STATE (R_SERIAL2_REC_CTRL, rec_stick_par, normal) \ + | IO_STATE (R_SERIAL2_REC_CTRL, rec_par, even) \ + | IO_STATE (R_SERIAL2_REC_CTRL, rec_par_en, disable) \ + | IO_STATE (R_SERIAL2_REC_CTRL, rec_bitnr, rec_8bit),$r0 + move.b $r0,[R_SERIAL2_REC_CTRL] + + ; Set up and enable the serial2 transmitter. + move.b IO_FIELD (R_SERIAL2_TR_CTRL, txd, 0) \ + | IO_STATE (R_SERIAL2_TR_CTRL, tr_enable, enable) \ + | IO_STATE (R_SERIAL2_TR_CTRL, auto_cts, disabled) \ + | IO_STATE (R_SERIAL2_TR_CTRL, stop_bits, one_bit) \ + | IO_STATE (R_SERIAL2_TR_CTRL, tr_stick_par, normal) \ + | IO_STATE (R_SERIAL2_TR_CTRL, tr_par, even) \ + | IO_STATE (R_SERIAL2_TR_CTRL, tr_par_en, disable) \ + | IO_STATE (R_SERIAL2_TR_CTRL, tr_bitnr, tr_8bit),$r0 + move.b $r0,[R_SERIAL2_TR_CTRL] +#endif + +#ifdef CONFIG_ETRAX_SERIAL_PORT3 + ;; setup the serial port 3 at 115200 baud for debug purposes + + moveq IO_STATE (R_SERIAL3_XOFF, tx_stop, enable) \ + | IO_STATE (R_SERIAL3_XOFF, auto_xoff, disable) \ + | IO_FIELD (R_SERIAL3_XOFF, xoff_char, 0),$r0 + move.d $r0,[R_SERIAL3_XOFF] + + ; 115.2kbaud for both transmit and receive + move.b IO_STATE (R_SERIAL3_BAUD, tr_baud, c115k2Hz) \ + | IO_STATE (R_SERIAL3_BAUD, rec_baud, c115k2Hz),$r0 + move.b $r0,[R_SERIAL3_BAUD] + + ; Set up and enable the serial3 receiver. + move.b IO_STATE (R_SERIAL3_REC_CTRL, dma_err, stop) \ + | IO_STATE (R_SERIAL3_REC_CTRL, rec_enable, enable) \ + | IO_STATE (R_SERIAL3_REC_CTRL, rts_, active) \ + | IO_STATE (R_SERIAL3_REC_CTRL, sampling, middle) \ + | IO_STATE (R_SERIAL3_REC_CTRL, rec_stick_par, normal) \ + | IO_STATE (R_SERIAL3_REC_CTRL, rec_par, even) \ + | IO_STATE (R_SERIAL3_REC_CTRL, rec_par_en, disable) \ + | IO_STATE (R_SERIAL3_REC_CTRL, rec_bitnr, rec_8bit),$r0 + move.b $r0,[R_SERIAL3_REC_CTRL] + + ; Set up and enable the serial3 transmitter. + move.b IO_FIELD (R_SERIAL3_TR_CTRL, txd, 0) \ + | IO_STATE (R_SERIAL3_TR_CTRL, tr_enable, enable) \ + | IO_STATE (R_SERIAL3_TR_CTRL, auto_cts, disabled) \ + | IO_STATE (R_SERIAL3_TR_CTRL, stop_bits, one_bit) \ + | IO_STATE (R_SERIAL3_TR_CTRL, tr_stick_par, normal) \ + | IO_STATE (R_SERIAL3_TR_CTRL, tr_par, even) \ + | IO_STATE (R_SERIAL3_TR_CTRL, tr_par_en, disable) \ + | IO_STATE (R_SERIAL3_TR_CTRL, tr_bitnr, tr_8bit),$r0 + move.b $r0,[R_SERIAL3_TR_CTRL] +#endif + + jump start_kernel ; jump into the C-function start_kernel in init/main.c + + .data +etrax_irv: + .dword 0 +romfs_start: + .dword 0 +romfs_length: + .dword 0 +romfs_in_flash: + .dword 0 + + ;; put some special pages at the beginning of the kernel aligned + ;; to page boundaries - the kernel cannot start until after this + +#ifdef CONFIG_CRIS_LOW_MAP +swapper_pg_dir = 0x60002000 +#else +swapper_pg_dir = 0xc0002000 +#endif + + .section ".init.data", "aw" +#include "../lib/hw_settings.S" diff --git a/kernel/arch/cris/arch-v10/kernel/io_interface_mux.c b/kernel/arch/cris/arch-v10/kernel/io_interface_mux.c new file mode 100644 index 000000000..ad64cd1c8 --- /dev/null +++ b/kernel/arch/cris/arch-v10/kernel/io_interface_mux.c @@ -0,0 +1,1182 @@ +/* IO interface mux allocator for ETRAX100LX. + * Copyright 2004-2007, Axis Communications AB + */ + + +/* C.f. ETRAX100LX Designer's Reference chapter 19.9 */ + +#include <linux/kernel.h> +#include <linux/slab.h> +#include <linux/errno.h> +#include <linux/module.h> +#include <linux/init.h> + +#include <arch/svinto.h> +#include <asm/io.h> +#include <arch/io_interface_mux.h> +#include <arch/system.h> + + +#define DBG(s) + +/* Macro to access ETRAX 100 registers */ +#define SETS(var, reg, field, val) var = (var & ~IO_MASK_(reg##_, field##_)) | \ + IO_STATE_(reg##_, field##_, _##val) + +enum io_if_group { + group_a = (1<<0), + group_b = (1<<1), + group_c = (1<<2), + group_d = (1<<3), + group_e = (1<<4), + group_f = (1<<5) +}; + +struct watcher +{ + void (*notify)(const unsigned int gpio_in_available, + const unsigned int gpio_out_available, + const unsigned char pa_available, + const unsigned char pb_available); + struct watcher *next; +}; + + +struct if_group +{ + enum io_if_group group; + /* name - the name of the group 'A' to 'F' */ + char *name; + /* used - a bit mask of all pins in the group in the order listed + * in the tables in 19.9.1 to 19.9.6. Note that no + * distinction is made between in, out and in/out pins. */ + unsigned int used; +}; + + +struct interface +{ + enum cris_io_interface ioif; + /* name - the name of the interface */ + char *name; + /* groups - OR'ed together io_if_group flags describing what pin groups + * the interface uses pins in. */ + unsigned char groups; + /* used - set when the interface is allocated. */ + unsigned char used; + char *owner; + /* group_a through group_f - bit masks describing what pins in the + * pin groups the interface uses. */ + unsigned int group_a; + unsigned int group_b; + unsigned int group_c; + unsigned int group_d; + unsigned int group_e; + unsigned int group_f; + + /* gpio_g_in, gpio_g_out, gpio_b - bit masks telling what pins in the + * GPIO ports the interface uses. This could be reconstucted using + * the group_X masks and a table of what pins the GPIO ports use, + * but that would be messy. */ + unsigned int gpio_g_in; + unsigned int gpio_g_out; + unsigned char gpio_b; +}; + +static struct if_group if_groups[6] = { + { + .group = group_a, + .name = "A", + .used = 0, + }, + { + .group = group_b, + .name = "B", + .used = 0, + }, + { + .group = group_c, + .name = "C", + .used = 0, + }, + { + .group = group_d, + .name = "D", + .used = 0, + }, + { + .group = group_e, + .name = "E", + .used = 0, + }, + { + .group = group_f, + .name = "F", + .used = 0, + } +}; + +/* The order in the array must match the order of enum + * cris_io_interface in io_interface_mux.h */ +static struct interface interfaces[] = { + /* Begin Non-multiplexed interfaces */ + { + .ioif = if_eth, + .name = "ethernet", + .groups = 0, + + .group_a = 0, + .group_b = 0, + .group_c = 0, + .group_d = 0, + .group_e = 0, + .group_f = 0, + + .gpio_g_in = 0, + .gpio_g_out = 0, + .gpio_b = 0 + }, + { + .ioif = if_serial_0, + .name = "serial_0", + .groups = 0, + + .group_a = 0, + .group_b = 0, + .group_c = 0, + .group_d = 0, + .group_e = 0, + .group_f = 0, + + .gpio_g_in = 0, + .gpio_g_out = 0, + .gpio_b = 0 + }, + /* End Non-multiplexed interfaces */ + { + .ioif = if_serial_1, + .name = "serial_1", + .groups = group_e, + + .group_a = 0, + .group_b = 0, + .group_c = 0, + .group_d = 0, + .group_e = 0x0f, + .group_f = 0, + + .gpio_g_in = 0x00000000, + .gpio_g_out = 0x00000000, + .gpio_b = 0x00 + }, + { + .ioif = if_serial_2, + .name = "serial_2", + .groups = group_b, + + .group_a = 0, + .group_b = 0x0f, + .group_c = 0, + .group_d = 0, + .group_e = 0, + .group_f = 0, + + .gpio_g_in = 0x000000c0, + .gpio_g_out = 0x000000c0, + .gpio_b = 0x00 + }, + { + .ioif = if_serial_3, + .name = "serial_3", + .groups = group_c, + + .group_a = 0, + .group_b = 0, + .group_c = 0x0f, + .group_d = 0, + .group_e = 0, + .group_f = 0, + + .gpio_g_in = 0xc0000000, + .gpio_g_out = 0xc0000000, + .gpio_b = 0x00 + }, + { + .ioif = if_sync_serial_1, + .name = "sync_serial_1", + .groups = group_e | group_f, + + .group_a = 0, + .group_b = 0, + .group_c = 0, + .group_d = 0, + .group_e = 0x0f, + .group_f = 0x10, + + .gpio_g_in = 0x00000000, + .gpio_g_out = 0x00000000, + .gpio_b = 0x10 + }, + { + .ioif = if_sync_serial_3, + .name = "sync_serial_3", + .groups = group_c | group_f, + + .group_a = 0, + .group_b = 0, + .group_c = 0x0f, + .group_d = 0, + .group_e = 0, + .group_f = 0x80, + + .gpio_g_in = 0xc0000000, + .gpio_g_out = 0xc0000000, + .gpio_b = 0x80 + }, + { + .ioif = if_shared_ram, + .name = "shared_ram", + .groups = group_a, + + .group_a = 0x7f8ff, + .group_b = 0, + .group_c = 0, + .group_d = 0, + .group_e = 0, + .group_f = 0, + + .gpio_g_in = 0x0000ff3e, + .gpio_g_out = 0x0000ff38, + .gpio_b = 0x00 + }, + { + .ioif = if_shared_ram_w, + .name = "shared_ram_w", + .groups = group_a | group_d, + + .group_a = 0x7f8ff, + .group_b = 0, + .group_c = 0, + .group_d = 0xff, + .group_e = 0, + .group_f = 0, + + .gpio_g_in = 0x00ffff3e, + .gpio_g_out = 0x00ffff38, + .gpio_b = 0x00 + }, + { + .ioif = if_par_0, + .name = "par_0", + .groups = group_a, + + .group_a = 0x7fbff, + .group_b = 0, + .group_c = 0, + .group_d = 0, + .group_e = 0, + .group_f = 0, + + .gpio_g_in = 0x0000ff3e, + .gpio_g_out = 0x0000ff3e, + .gpio_b = 0x00 + }, + { + .ioif = if_par_1, + .name = "par_1", + .groups = group_d, + + .group_a = 0, + .group_b = 0, + .group_c = 0, + .group_d = 0x7feff, + .group_e = 0, + .group_f = 0, + + .gpio_g_in = 0x3eff0000, + .gpio_g_out = 0x3eff0000, + .gpio_b = 0x00 + }, + { + .ioif = if_par_w, + .name = "par_w", + .groups = group_a | group_d, + + .group_a = 0x7fbff, + .group_b = 0, + .group_c = 0, + .group_d = 0xff, + .group_e = 0, + .group_f = 0, + + .gpio_g_in = 0x00ffff3e, + .gpio_g_out = 0x00ffff3e, + .gpio_b = 0x00 + }, + { + .ioif = if_scsi8_0, + .name = "scsi8_0", + .groups = group_a | group_b | group_f, + + .group_a = 0x7ffff, + .group_b = 0x0f, + .group_c = 0, + .group_d = 0, + .group_e = 0, + .group_f = 0x10, + + .gpio_g_in = 0x0000ffff, + .gpio_g_out = 0x0000ffff, + .gpio_b = 0x10 + }, + { + .ioif = if_scsi8_1, + .name = "scsi8_1", + .groups = group_c | group_d | group_f, + + .group_a = 0, + .group_b = 0, + .group_c = 0x0f, + .group_d = 0x7ffff, + .group_e = 0, + .group_f = 0x80, + + .gpio_g_in = 0xffff0000, + .gpio_g_out = 0xffff0000, + .gpio_b = 0x80 + }, + { + .ioif = if_scsi_w, + .name = "scsi_w", + .groups = group_a | group_b | group_d | group_f, + + .group_a = 0x7ffff, + .group_b = 0x0f, + .group_c = 0, + .group_d = 0x601ff, + .group_e = 0, + .group_f = 0x90, + + .gpio_g_in = 0x01ffffff, + .gpio_g_out = 0x07ffffff, + .gpio_b = 0x80 + }, + { + .ioif = if_ata, + .name = "ata", + .groups = group_a | group_b | group_c | group_d, + + .group_a = 0x7ffff, + .group_b = 0x0f, + .group_c = 0x0f, + .group_d = 0x7cfff, + .group_e = 0, + .group_f = 0, + + .gpio_g_in = 0xf9ffffff, + .gpio_g_out = 0xffffffff, + .gpio_b = 0x80 + }, + { + .ioif = if_csp, + .name = "csp", + .groups = group_f, + + .group_a = 0, + .group_b = 0, + .group_c = 0, + .group_d = 0, + .group_e = 0, + .group_f = 0xfc, + + .gpio_g_in = 0x00000000, + .gpio_g_out = 0x00000000, + .gpio_b = 0xfc + }, + { + .ioif = if_i2c, + .name = "i2c", + .groups = group_f, + + .group_a = 0, + .group_b = 0, + .group_c = 0, + .group_d = 0, + .group_e = 0, + .group_f = 0x03, + + .gpio_g_in = 0x00000000, + .gpio_g_out = 0x00000000, + .gpio_b = 0x03 + }, + { + .ioif = if_usb_1, + .name = "usb_1", + .groups = group_e | group_f, + + .group_a = 0, + .group_b = 0, + .group_c = 0, + .group_d = 0, + .group_e = 0x0f, + .group_f = 0x2c, + + .gpio_g_in = 0x00000000, + .gpio_g_out = 0x00000000, + .gpio_b = 0x2c + }, + { + .ioif = if_usb_2, + .name = "usb_2", + .groups = group_d, + + .group_a = 0, + .group_b = 0, + .group_c = 0, + .group_d = 0, + .group_e = 0x33e00, + .group_f = 0, + + .gpio_g_in = 0x3e000000, + .gpio_g_out = 0x0c000000, + .gpio_b = 0x00 + }, + /* GPIO pins */ + { + .ioif = if_gpio_grp_a, + .name = "gpio_a", + .groups = group_a, + + .group_a = 0, + .group_b = 0, + .group_c = 0, + .group_d = 0, + .group_e = 0, + .group_f = 0, + + .gpio_g_in = 0x0000ff3f, + .gpio_g_out = 0x0000ff3f, + .gpio_b = 0x00 + }, + { + .ioif = if_gpio_grp_b, + .name = "gpio_b", + .groups = group_b, + + .group_a = 0, + .group_b = 0, + .group_c = 0, + .group_d = 0, + .group_e = 0, + .group_f = 0, + + .gpio_g_in = 0x000000c0, + .gpio_g_out = 0x000000c0, + .gpio_b = 0x00 + }, + { + .ioif = if_gpio_grp_c, + .name = "gpio_c", + .groups = group_c, + + .group_a = 0, + .group_b = 0, + .group_c = 0, + .group_d = 0, + .group_e = 0, + .group_f = 0, + + .gpio_g_in = 0xc0000000, + .gpio_g_out = 0xc0000000, + .gpio_b = 0x00 + }, + { + .ioif = if_gpio_grp_d, + .name = "gpio_d", + .groups = group_d, + + .group_a = 0, + .group_b = 0, + .group_c = 0, + .group_d = 0, + .group_e = 0, + .group_f = 0, + + .gpio_g_in = 0x3fff0000, + .gpio_g_out = 0x3fff0000, + .gpio_b = 0x00 + }, + { + .ioif = if_gpio_grp_e, + .name = "gpio_e", + .groups = group_e, + + .group_a = 0, + .group_b = 0, + .group_c = 0, + .group_d = 0, + .group_e = 0, + .group_f = 0, + + .gpio_g_in = 0x00000000, + .gpio_g_out = 0x00000000, + .gpio_b = 0x00 + }, + { + .ioif = if_gpio_grp_f, + .name = "gpio_f", + .groups = group_f, + + .group_a = 0, + .group_b = 0, + .group_c = 0, + .group_d = 0, + .group_e = 0, + .group_f = 0, + + .gpio_g_in = 0x00000000, + .gpio_g_out = 0x00000000, + .gpio_b = 0xff + } + /* Array end */ +}; + +static struct watcher *watchers = NULL; + +/* The pins that are free to use in the GPIO ports. */ +static unsigned int gpio_in_pins = 0xffffffff; +static unsigned int gpio_out_pins = 0xffffffff; +static unsigned char gpio_pb_pins = 0xff; +static unsigned char gpio_pa_pins = 0xff; + +/* Identifiers for the owners of the GPIO pins. */ +static enum cris_io_interface gpio_pa_owners[8]; +static enum cris_io_interface gpio_pb_owners[8]; +static enum cris_io_interface gpio_pg_owners[32]; + +static int cris_io_interface_init(void); + +static unsigned char clear_group_from_set(const unsigned char groups, struct if_group *group) +{ + return (groups & ~group->group); +} + + +static struct if_group *get_group(const unsigned char groups) +{ + int i; + for (i = 0; i < ARRAY_SIZE(if_groups); i++) { + if (groups & if_groups[i].group) { + return &if_groups[i]; + } + } + return NULL; +} + + +static void notify_watchers(void) +{ + struct watcher *w = watchers; + + DBG(printk("io_interface_mux: notifying watchers\n")); + + while (NULL != w) { + w->notify((const unsigned int)gpio_in_pins, + (const unsigned int)gpio_out_pins, + (const unsigned char)gpio_pa_pins, + (const unsigned char)gpio_pb_pins); + w = w->next; + } +} + + +int cris_request_io_interface(enum cris_io_interface ioif, const char *device_id) +{ + int set_gen_config = 0; + int set_gen_config_ii = 0; + unsigned long int gens; + unsigned long int gens_ii; + struct if_group *grp; + unsigned char group_set; + unsigned long flags; + int res = 0; + + (void)cris_io_interface_init(); + + DBG(printk("cris_request_io_interface(%d, \"%s\")\n", ioif, device_id)); + + if ((ioif >= if_max_interfaces) || (ioif < 0)) { + printk(KERN_CRIT "cris_request_io_interface: Bad interface " + "%u submitted for %s\n", + ioif, + device_id); + return -EINVAL; + } + + local_irq_save(flags); + + if (interfaces[ioif].used) { + printk(KERN_CRIT "cris_io_interface: Cannot allocate interface " + "%s for %s, in use by %s\n", + interfaces[ioif].name, + device_id, + interfaces[ioif].owner); + res = -EBUSY; + goto exit; + } + + /* Check that all required pins in the used groups are free + * before allocating. */ + group_set = interfaces[ioif].groups; + while (NULL != (grp = get_group(group_set))) { + unsigned int if_group_use = 0; + + switch (grp->group) { + case group_a: + if_group_use = interfaces[ioif].group_a; + break; + case group_b: + if_group_use = interfaces[ioif].group_b; + break; + case group_c: + if_group_use = interfaces[ioif].group_c; + break; + case group_d: + if_group_use = interfaces[ioif].group_d; + break; + case group_e: + if_group_use = interfaces[ioif].group_e; + break; + case group_f: + if_group_use = interfaces[ioif].group_f; + break; + default: + BUG_ON(1); + } + + if (if_group_use & grp->used) { + printk(KERN_INFO "cris_request_io_interface: group " + "%s needed by %s not available\n", + grp->name, interfaces[ioif].name); + res = -EBUSY; + goto exit; + } + + group_set = clear_group_from_set(group_set, grp); + } + + /* Are the required GPIO pins available too? */ + if (((interfaces[ioif].gpio_g_in & gpio_in_pins) != + interfaces[ioif].gpio_g_in) || + ((interfaces[ioif].gpio_g_out & gpio_out_pins) != + interfaces[ioif].gpio_g_out) || + ((interfaces[ioif].gpio_b & gpio_pb_pins) != + interfaces[ioif].gpio_b)) { + printk(KERN_CRIT "cris_request_io_interface: Could not get " + "required pins for interface %u\n", ioif); + res = -EBUSY; + goto exit; + } + + /* Check which registers need to be reconfigured. */ + gens = genconfig_shadow; + gens_ii = gen_config_ii_shadow; + + set_gen_config = 1; + switch (ioif) + { + /* Begin Non-multiplexed interfaces */ + case if_eth: + /* fall through */ + case if_serial_0: + set_gen_config = 0; + break; + /* End Non-multiplexed interfaces */ + case if_serial_1: + set_gen_config_ii = 1; + SETS(gens_ii, R_GEN_CONFIG_II, sermode1, async); + break; + case if_serial_2: + SETS(gens, R_GEN_CONFIG, ser2, select); + break; + case if_serial_3: + SETS(gens, R_GEN_CONFIG, ser3, select); + set_gen_config_ii = 1; + SETS(gens_ii, R_GEN_CONFIG_II, sermode3, async); + break; + case if_sync_serial_1: + set_gen_config_ii = 1; + SETS(gens_ii, R_GEN_CONFIG_II, sermode1, sync); + break; + case if_sync_serial_3: + SETS(gens, R_GEN_CONFIG, ser3, select); + set_gen_config_ii = 1; + SETS(gens_ii, R_GEN_CONFIG_II, sermode3, sync); + break; + case if_shared_ram: + SETS(gens, R_GEN_CONFIG, mio, select); + break; + case if_shared_ram_w: + SETS(gens, R_GEN_CONFIG, mio_w, select); + break; + case if_par_0: + SETS(gens, R_GEN_CONFIG, par0, select); + break; + case if_par_1: + SETS(gens, R_GEN_CONFIG, par1, select); + break; + case if_par_w: + SETS(gens, R_GEN_CONFIG, par0, select); + SETS(gens, R_GEN_CONFIG, par_w, select); + break; + case if_scsi8_0: + SETS(gens, R_GEN_CONFIG, scsi0, select); + break; + case if_scsi8_1: + SETS(gens, R_GEN_CONFIG, scsi1, select); + break; + case if_scsi_w: + SETS(gens, R_GEN_CONFIG, scsi0, select); + SETS(gens, R_GEN_CONFIG, scsi0w, select); + break; + case if_ata: + SETS(gens, R_GEN_CONFIG, ata, select); + break; + case if_csp: + /* fall through */ + case if_i2c: + set_gen_config = 0; + break; + case if_usb_1: + SETS(gens, R_GEN_CONFIG, usb1, select); + break; + case if_usb_2: + SETS(gens, R_GEN_CONFIG, usb2, select); + break; + case if_gpio_grp_a: + /* GPIO groups are only accounted, don't do configuration changes. */ + /* fall through */ + case if_gpio_grp_b: + /* fall through */ + case if_gpio_grp_c: + /* fall through */ + case if_gpio_grp_d: + /* fall through */ + case if_gpio_grp_e: + /* fall through */ + case if_gpio_grp_f: + set_gen_config = 0; + break; + default: + printk(KERN_INFO "cris_request_io_interface: Bad interface " + "%u submitted for %s\n", + ioif, device_id); + res = -EBUSY; + goto exit; + } + + /* All needed I/O pins and pin groups are free, allocate. */ + group_set = interfaces[ioif].groups; + while (NULL != (grp = get_group(group_set))) { + unsigned int if_group_use = 0; + + switch (grp->group) { + case group_a: + if_group_use = interfaces[ioif].group_a; + break; + case group_b: + if_group_use = interfaces[ioif].group_b; + break; + case group_c: + if_group_use = interfaces[ioif].group_c; + break; + case group_d: + if_group_use = interfaces[ioif].group_d; + break; + case group_e: + if_group_use = interfaces[ioif].group_e; + break; + case group_f: + if_group_use = interfaces[ioif].group_f; + break; + default: + BUG_ON(1); + } + grp->used |= if_group_use; + + group_set = clear_group_from_set(group_set, grp); + } + + interfaces[ioif].used = 1; + interfaces[ioif].owner = (char*)device_id; + + if (set_gen_config) { + volatile int i; + genconfig_shadow = gens; + *R_GEN_CONFIG = genconfig_shadow; + /* Wait 12 cycles before doing any DMA command */ + for(i = 6; i > 0; i--) + nop(); + } + if (set_gen_config_ii) { + gen_config_ii_shadow = gens_ii; + *R_GEN_CONFIG_II = gen_config_ii_shadow; + } + + DBG(printk(KERN_DEBUG "GPIO pins: available before: " + "g_in=0x%08x g_out=0x%08x pb=0x%02x\n", + gpio_in_pins, gpio_out_pins, gpio_pb_pins)); + DBG(printk(KERN_DEBUG + "grabbing pins: g_in=0x%08x g_out=0x%08x pb=0x%02x\n", + interfaces[ioif].gpio_g_in, + interfaces[ioif].gpio_g_out, + interfaces[ioif].gpio_b)); + + gpio_in_pins &= ~interfaces[ioif].gpio_g_in; + gpio_out_pins &= ~interfaces[ioif].gpio_g_out; + gpio_pb_pins &= ~interfaces[ioif].gpio_b; + + DBG(printk(KERN_DEBUG "GPIO pins: available after: " + "g_in=0x%08x g_out=0x%08x pb=0x%02x\n", + gpio_in_pins, gpio_out_pins, gpio_pb_pins)); + +exit: + local_irq_restore(flags); + if (res == 0) + notify_watchers(); + return res; +} + + +void cris_free_io_interface(enum cris_io_interface ioif) +{ + struct if_group *grp; + unsigned char group_set; + unsigned long flags; + + (void)cris_io_interface_init(); + + if ((ioif >= if_max_interfaces) || (ioif < 0)) { + printk(KERN_CRIT "cris_free_io_interface: Bad interface %u\n", + ioif); + return; + } + local_irq_save(flags); + if (!interfaces[ioif].used) { + printk(KERN_CRIT "cris_free_io_interface: Freeing free interface %u\n", + ioif); + local_irq_restore(flags); + return; + } + group_set = interfaces[ioif].groups; + while (NULL != (grp = get_group(group_set))) { + unsigned int if_group_use = 0; + + switch (grp->group) { + case group_a: + if_group_use = interfaces[ioif].group_a; + break; + case group_b: + if_group_use = interfaces[ioif].group_b; + break; + case group_c: + if_group_use = interfaces[ioif].group_c; + break; + case group_d: + if_group_use = interfaces[ioif].group_d; + break; + case group_e: + if_group_use = interfaces[ioif].group_e; + break; + case group_f: + if_group_use = interfaces[ioif].group_f; + break; + default: + BUG_ON(1); + } + + if ((grp->used & if_group_use) != if_group_use) + BUG_ON(1); + grp->used = grp->used & ~if_group_use; + + group_set = clear_group_from_set(group_set, grp); + } + interfaces[ioif].used = 0; + interfaces[ioif].owner = NULL; + + DBG(printk("GPIO pins: available before: g_in=0x%08x g_out=0x%08x pb=0x%02x\n", + gpio_in_pins, gpio_out_pins, gpio_pb_pins)); + DBG(printk("freeing pins: g_in=0x%08x g_out=0x%08x pb=0x%02x\n", + interfaces[ioif].gpio_g_in, + interfaces[ioif].gpio_g_out, + interfaces[ioif].gpio_b)); + + gpio_in_pins |= interfaces[ioif].gpio_g_in; + gpio_out_pins |= interfaces[ioif].gpio_g_out; + gpio_pb_pins |= interfaces[ioif].gpio_b; + + DBG(printk("GPIO pins: available after: g_in=0x%08x g_out=0x%08x pb=0x%02x\n", + gpio_in_pins, gpio_out_pins, gpio_pb_pins)); + + local_irq_restore(flags); + + notify_watchers(); +} + +/* Create a bitmask from bit 0 (inclusive) to bit stop_bit + (non-inclusive). stop_bit == 0 returns 0x0 */ +static inline unsigned int create_mask(const unsigned stop_bit) +{ + /* Avoid overflow */ + if (stop_bit >= 32) { + return 0xffffffff; + } + return (1<<stop_bit)-1; +} + + +/* port can be 'a', 'b' or 'g' */ +int cris_io_interface_allocate_pins(const enum cris_io_interface ioif, + const char port, + const unsigned start_bit, + const unsigned stop_bit) +{ + unsigned int i; + unsigned int mask = 0; + unsigned int tmp_mask; + unsigned long int flags; + enum cris_io_interface *owners; + + (void)cris_io_interface_init(); + + DBG(printk("cris_io_interface_allocate_pins: if=%d port=%c start=%u stop=%u\n", + ioif, port, start_bit, stop_bit)); + + if (!((start_bit <= stop_bit) && + ((((port == 'a') || (port == 'b')) && (stop_bit < 8)) || + ((port == 'g') && (stop_bit < 32))))) { + return -EINVAL; + } + + mask = create_mask(stop_bit + 1); + tmp_mask = create_mask(start_bit); + mask &= ~tmp_mask; + + DBG(printk("cris_io_interface_allocate_pins: port=%c start=%u stop=%u mask=0x%08x\n", + port, start_bit, stop_bit, mask)); + + local_irq_save(flags); + + switch (port) { + case 'a': + if ((gpio_pa_pins & mask) != mask) { + local_irq_restore(flags); + return -EBUSY; + } + owners = gpio_pa_owners; + gpio_pa_pins &= ~mask; + break; + case 'b': + if ((gpio_pb_pins & mask) != mask) { + local_irq_restore(flags); + return -EBUSY; + } + owners = gpio_pb_owners; + gpio_pb_pins &= ~mask; + break; + case 'g': + if (((gpio_in_pins & mask) != mask) || + ((gpio_out_pins & mask) != mask)) { + local_irq_restore(flags); + return -EBUSY; + } + owners = gpio_pg_owners; + gpio_in_pins &= ~mask; + gpio_out_pins &= ~mask; + break; + default: + local_irq_restore(flags); + return -EINVAL; + } + + for (i = start_bit; i <= stop_bit; i++) { + owners[i] = ioif; + } + local_irq_restore(flags); + + notify_watchers(); + return 0; +} + + +/* port can be 'a', 'b' or 'g' */ +int cris_io_interface_free_pins(const enum cris_io_interface ioif, + const char port, + const unsigned start_bit, + const unsigned stop_bit) +{ + unsigned int i; + unsigned int mask = 0; + unsigned int tmp_mask; + unsigned long int flags; + enum cris_io_interface *owners; + + (void)cris_io_interface_init(); + + if (!((start_bit <= stop_bit) && + ((((port == 'a') || (port == 'b')) && (stop_bit < 8)) || + ((port == 'g') && (stop_bit < 32))))) { + return -EINVAL; + } + + mask = create_mask(stop_bit + 1); + tmp_mask = create_mask(start_bit); + mask &= ~tmp_mask; + + DBG(printk("cris_io_interface_free_pins: port=%c start=%u stop=%u mask=0x%08x\n", + port, start_bit, stop_bit, mask)); + + local_irq_save(flags); + + switch (port) { + case 'a': + if ((~gpio_pa_pins & mask) != mask) { + local_irq_restore(flags); + printk(KERN_CRIT "cris_io_interface_free_pins: Freeing free pins"); + } + owners = gpio_pa_owners; + break; + case 'b': + if ((~gpio_pb_pins & mask) != mask) { + local_irq_restore(flags); + printk(KERN_CRIT "cris_io_interface_free_pins: Freeing free pins"); + } + owners = gpio_pb_owners; + break; + case 'g': + if (((~gpio_in_pins & mask) != mask) || + ((~gpio_out_pins & mask) != mask)) { + local_irq_restore(flags); + printk(KERN_CRIT "cris_io_interface_free_pins: Freeing free pins"); + } + owners = gpio_pg_owners; + break; + default: + owners = NULL; /* Cannot happen. Shut up, gcc! */ + } + + for (i = start_bit; i <= stop_bit; i++) { + if (owners[i] != ioif) { + printk(KERN_CRIT "cris_io_interface_free_pins: Freeing unowned pins"); + } + } + + /* All was ok, change data. */ + switch (port) { + case 'a': + gpio_pa_pins |= mask; + break; + case 'b': + gpio_pb_pins |= mask; + break; + case 'g': + gpio_in_pins |= mask; + gpio_out_pins |= mask; + break; + } + + for (i = start_bit; i <= stop_bit; i++) { + owners[i] = if_unclaimed; + } + local_irq_restore(flags); + notify_watchers(); + + return 0; +} + + +int cris_io_interface_register_watcher(void (*notify)(const unsigned int gpio_in_available, + const unsigned int gpio_out_available, + const unsigned char pa_available, + const unsigned char pb_available)) +{ + struct watcher *w; + + (void)cris_io_interface_init(); + + if (NULL == notify) { + return -EINVAL; + } + w = kmalloc(sizeof(*w), GFP_KERNEL); + if (!w) { + return -ENOMEM; + } + w->notify = notify; + w->next = watchers; + watchers = w; + + w->notify((const unsigned int)gpio_in_pins, + (const unsigned int)gpio_out_pins, + (const unsigned char)gpio_pa_pins, + (const unsigned char)gpio_pb_pins); + + return 0; +} + +void cris_io_interface_delete_watcher(void (*notify)(const unsigned int gpio_in_available, + const unsigned int gpio_out_available, + const unsigned char pa_available, + const unsigned char pb_available)) +{ + struct watcher *w = watchers, *prev = NULL; + + (void)cris_io_interface_init(); + + while ((NULL != w) && (w->notify != notify)){ + prev = w; + w = w->next; + } + if (NULL != w) { + if (NULL != prev) { + prev->next = w->next; + } else { + watchers = w->next; + } + kfree(w); + return; + } + printk(KERN_WARNING "cris_io_interface_delete_watcher: Deleting unknown watcher 0x%p\n", notify); +} + + +static int cris_io_interface_init(void) +{ + static int first = 1; + int i; + + if (!first) { + return 0; + } + first = 0; + + for (i = 0; i<8; i++) { + gpio_pa_owners[i] = if_unclaimed; + gpio_pb_owners[i] = if_unclaimed; + gpio_pg_owners[i] = if_unclaimed; + } + for (; i<32; i++) { + gpio_pg_owners[i] = if_unclaimed; + } + return 0; +} + + +module_init(cris_io_interface_init); + + +EXPORT_SYMBOL(cris_request_io_interface); +EXPORT_SYMBOL(cris_free_io_interface); +EXPORT_SYMBOL(cris_io_interface_allocate_pins); +EXPORT_SYMBOL(cris_io_interface_free_pins); +EXPORT_SYMBOL(cris_io_interface_register_watcher); +EXPORT_SYMBOL(cris_io_interface_delete_watcher); diff --git a/kernel/arch/cris/arch-v10/kernel/irq.c b/kernel/arch/cris/arch-v10/kernel/irq.c new file mode 100644 index 000000000..09cae80a8 --- /dev/null +++ b/kernel/arch/cris/arch-v10/kernel/irq.c @@ -0,0 +1,235 @@ +/* + * linux/arch/cris/kernel/irq.c + * + * Copyright (c) 2000-2002 Axis Communications AB + * + * Authors: Bjorn Wesen (bjornw@axis.com) + * + * This file contains the interrupt vectors and some + * helper functions + * + */ + +#include <asm/irq.h> +#include <asm/current.h> +#include <linux/irq.h> +#include <linux/interrupt.h> +#include <linux/kernel.h> +#include <linux/init.h> + +#define crisv10_mask_irq(irq_nr) (*R_VECT_MASK_CLR = 1 << (irq_nr)); +#define crisv10_unmask_irq(irq_nr) (*R_VECT_MASK_SET = 1 << (irq_nr)); + +extern void kgdb_init(void); +extern void breakpoint(void); + +/* don't use set_int_vector, it bypasses the linux interrupt handlers. it is + * global just so that the kernel gdb can use it. + */ + +void +set_int_vector(int n, irqvectptr addr) +{ + etrax_irv->v[n + 0x20] = (irqvectptr)addr; +} + +/* the breakpoint vector is obviously not made just like the normal irq handlers + * but needs to contain _code_ to jump to addr. + * + * the BREAK n instruction jumps to IBR + n * 8 + */ + +void +set_break_vector(int n, irqvectptr addr) +{ + unsigned short *jinstr = (unsigned short *)&etrax_irv->v[n*2]; + unsigned long *jaddr = (unsigned long *)(jinstr + 1); + + /* if you don't know what this does, do not touch it! */ + + *jinstr = 0x0d3f; + *jaddr = (unsigned long)addr; + + /* 00000026 <clrlop+1a> 3f0d82000000 jump 0x82 */ +} + +/* + * This builds up the IRQ handler stubs using some ugly macros in irq.h + * + * These macros create the low-level assembly IRQ routines that do all + * the operations that are needed. They are also written to be fast - and to + * disable interrupts as little as humanly possible. + * + */ + +/* IRQ0 and 1 are special traps */ +void hwbreakpoint(void); +void IRQ1_interrupt(void); +BUILD_TIMER_IRQ(2, 0x04) /* the timer interrupt is somewhat special */ +BUILD_IRQ(3, 0x08) +BUILD_IRQ(4, 0x10) +BUILD_IRQ(5, 0x20) +BUILD_IRQ(6, 0x40) +BUILD_IRQ(7, 0x80) +BUILD_IRQ(8, 0x100) +BUILD_IRQ(9, 0x200) +BUILD_IRQ(10, 0x400) +BUILD_IRQ(11, 0x800) +BUILD_IRQ(12, 0x1000) +BUILD_IRQ(13, 0x2000) +void mmu_bus_fault(void); /* IRQ 14 is the bus fault interrupt */ +void multiple_interrupt(void); /* IRQ 15 is the multiple IRQ interrupt */ +BUILD_IRQ(16, 0x10000 | 0x20000) /* ethernet tx interrupt needs to block rx */ +BUILD_IRQ(17, 0x20000 | 0x10000) /* ...and vice versa */ +BUILD_IRQ(18, 0x40000) +BUILD_IRQ(19, 0x80000) +BUILD_IRQ(20, 0x100000) +BUILD_IRQ(21, 0x200000) +BUILD_IRQ(22, 0x400000) +BUILD_IRQ(23, 0x800000) +BUILD_IRQ(24, 0x1000000) +BUILD_IRQ(25, 0x2000000) +/* IRQ 26-30 are reserved */ +BUILD_IRQ(31, 0x80000000) + +/* + * Pointers to the low-level handlers + */ + +static void (*interrupt[NR_IRQS])(void) = { + NULL, NULL, IRQ2_interrupt, IRQ3_interrupt, + IRQ4_interrupt, IRQ5_interrupt, IRQ6_interrupt, IRQ7_interrupt, + IRQ8_interrupt, IRQ9_interrupt, IRQ10_interrupt, IRQ11_interrupt, + IRQ12_interrupt, IRQ13_interrupt, NULL, NULL, + IRQ16_interrupt, IRQ17_interrupt, IRQ18_interrupt, IRQ19_interrupt, + IRQ20_interrupt, IRQ21_interrupt, IRQ22_interrupt, IRQ23_interrupt, + IRQ24_interrupt, IRQ25_interrupt, NULL, NULL, NULL, NULL, NULL, + IRQ31_interrupt +}; + +static void enable_crisv10_irq(struct irq_data *data) +{ + crisv10_unmask_irq(data->irq); +} + +static void disable_crisv10_irq(struct irq_data *data) +{ + crisv10_mask_irq(data->irq); +} + +static struct irq_chip crisv10_irq_type = { + .name = "CRISv10", + .irq_shutdown = disable_crisv10_irq, + .irq_enable = enable_crisv10_irq, + .irq_disable = disable_crisv10_irq, +}; + +void weird_irq(void); +void system_call(void); /* from entry.S */ +void do_sigtrap(void); /* from entry.S */ +void gdb_handle_breakpoint(void); /* from entry.S */ + +extern void do_IRQ(int irq, struct pt_regs * regs); + +/* Handle multiple IRQs */ +void do_multiple_IRQ(struct pt_regs* regs) +{ + int bit; + unsigned masked; + unsigned mask; + unsigned ethmask = 0; + + /* Get interrupts to mask and handle */ + mask = masked = *R_VECT_MASK_RD; + + /* Never mask timer IRQ */ + mask &= ~(IO_MASK(R_VECT_MASK_RD, timer0)); + + /* + * If either ethernet interrupt (rx or tx) is active then block + * the other one too. Unblock afterwards also. + */ + if (mask & + (IO_STATE(R_VECT_MASK_RD, dma0, active) | + IO_STATE(R_VECT_MASK_RD, dma1, active))) { + ethmask = (IO_MASK(R_VECT_MASK_RD, dma0) | + IO_MASK(R_VECT_MASK_RD, dma1)); + } + + /* Block them */ + *R_VECT_MASK_CLR = (mask | ethmask); + + /* An extra irq_enter here to prevent softIRQs to run after + * each do_IRQ. This will decrease the interrupt latency. + */ + irq_enter(); + + /* Handle all IRQs */ + for (bit = 2; bit < 32; bit++) { + if (masked & (1 << bit)) { + do_IRQ(bit, regs); + } + } + + /* This irq_exit() will trigger the soft IRQs. */ + irq_exit(); + + /* Unblock the IRQs again */ + *R_VECT_MASK_SET = (masked | ethmask); +} + +/* init_IRQ() is called by start_kernel and is responsible for fixing IRQ masks and + setting the irq vector table. +*/ + +void __init init_IRQ(void) +{ + int i; + + /* clear all interrupt masks */ + *R_IRQ_MASK0_CLR = 0xffffffff; + *R_IRQ_MASK1_CLR = 0xffffffff; + *R_IRQ_MASK2_CLR = 0xffffffff; + *R_VECT_MASK_CLR = 0xffffffff; + + for (i = 0; i < 256; i++) + etrax_irv->v[i] = weird_irq; + + /* Initialize IRQ handler descriptors. */ + for(i = 2; i < NR_IRQS; i++) { + irq_set_chip_and_handler(i, &crisv10_irq_type, + handle_simple_irq); + set_int_vector(i, interrupt[i]); + } + + /* the entries in the break vector contain actual code to be + executed by the associated break handler, rather than just a jump + address. therefore we need to setup a default breakpoint handler + for all breakpoints */ + for (i = 0; i < 16; i++) + set_break_vector(i, do_sigtrap); + + /* except IRQ 15 which is the multiple-IRQ handler on Etrax100 */ + set_int_vector(15, multiple_interrupt); + + /* 0 and 1 which are special breakpoint/NMI traps */ + set_int_vector(0, hwbreakpoint); + set_int_vector(1, IRQ1_interrupt); + + /* and irq 14 which is the mmu bus fault handler */ + set_int_vector(14, mmu_bus_fault); + + /* setup the system-call trap, which is reached by BREAK 13 */ + set_break_vector(13, system_call); + + /* setup a breakpoint handler for debugging used for both user and + kernel mode debugging (which is why it is not inside an ifdef + CONFIG_ETRAX_KGDB) */ + set_break_vector(8, gdb_handle_breakpoint); + +#ifdef CONFIG_ETRAX_KGDB + /* setup kgdb if its enabled, and break into the debugger */ + kgdb_init(); + breakpoint(); +#endif +} diff --git a/kernel/arch/cris/arch-v10/kernel/kgdb.c b/kernel/arch/cris/arch-v10/kernel/kgdb.c new file mode 100644 index 000000000..22d846bfc --- /dev/null +++ b/kernel/arch/cris/arch-v10/kernel/kgdb.c @@ -0,0 +1,1144 @@ +/*!************************************************************************** +*! +*! FILE NAME : kgdb.c +*! +*! DESCRIPTION: Implementation of the gdb stub with respect to ETRAX 100. +*! It is a mix of arch/m68k/kernel/kgdb.c and cris_stub.c. +*! +*!--------------------------------------------------------------------------- +*! HISTORY +*! +*! DATE NAME CHANGES +*! ---- ---- ------- +*! Apr 26 1999 Hendrik Ruijter Initial version. +*! May 6 1999 Hendrik Ruijter Removed call to strlen in libc and removed +*! struct assignment as it generates calls to +*! memcpy in libc. +*! Jun 17 1999 Hendrik Ruijter Added gdb 4.18 support. 'X', 'qC' and 'qL'. +*! Jul 21 1999 Bjorn Wesen eLinux port +*! +*!--------------------------------------------------------------------------- +*! +*! (C) Copyright 1999, Axis Communications AB, LUND, SWEDEN +*! +*!**************************************************************************/ +/* @(#) cris_stub.c 1.3 06/17/99 */ + +/* + * kgdb usage notes: + * ----------------- + * + * If you select CONFIG_ETRAX_KGDB in the configuration, the kernel will be + * built with different gcc flags: "-g" is added to get debug infos, and + * "-fomit-frame-pointer" is omitted to make debugging easier. Since the + * resulting kernel will be quite big (approx. > 7 MB), it will be stripped + * before compresion. Such a kernel will behave just as usually, except if + * given a "debug=<device>" command line option. (Only serial devices are + * allowed for <device>, i.e. no printers or the like; possible values are + * machine depedend and are the same as for the usual debug device, the one + * for logging kernel messages.) If that option is given and the device can be + * initialized, the kernel will connect to the remote gdb in trap_init(). The + * serial parameters are fixed to 8N1 and 115200 bps, for easyness of + * implementation. + * + * To start a debugging session, start that gdb with the debugging kernel + * image (the one with the symbols, vmlinux.debug) named on the command line. + * This file will be used by gdb to get symbol and debugging infos about the + * kernel. Next, select remote debug mode by + * target remote <device> + * where <device> is the name of the serial device over which the debugged + * machine is connected. Maybe you have to adjust the baud rate by + * set remotebaud <rate> + * or also other parameters with stty: + * shell stty ... </dev/... + * If the kernel to debug has already booted, it waited for gdb and now + * connects, and you'll see a breakpoint being reported. If the kernel isn't + * running yet, start it now. The order of gdb and the kernel doesn't matter. + * Another thing worth knowing about in the getting-started phase is how to + * debug the remote protocol itself. This is activated with + * set remotedebug 1 + * gdb will then print out each packet sent or received. You'll also get some + * messages about the gdb stub on the console of the debugged machine. + * + * If all that works, you can use lots of the usual debugging techniques on + * the kernel, e.g. inspecting and changing variables/memory, setting + * breakpoints, single stepping and so on. It's also possible to interrupt the + * debugged kernel by pressing C-c in gdb. Have fun! :-) + * + * The gdb stub is entered (and thus the remote gdb gets control) in the + * following situations: + * + * - If breakpoint() is called. This is just after kgdb initialization, or if + * a breakpoint() call has been put somewhere into the kernel source. + * (Breakpoints can of course also be set the usual way in gdb.) + * In eLinux, we call breakpoint() in init/main.c after IRQ initialization. + * + * - If there is a kernel exception, i.e. bad_super_trap() or die_if_kernel() + * are entered. All the CPU exceptions are mapped to (more or less..., see + * the hard_trap_info array below) appropriate signal, which are reported + * to gdb. die_if_kernel() is usually called after some kind of access + * error and thus is reported as SIGSEGV. + * + * - When panic() is called. This is reported as SIGABRT. + * + * - If C-c is received over the serial line, which is treated as + * SIGINT. + * + * Of course, all these signals are just faked for gdb, since there is no + * signal concept as such for the kernel. It also isn't possible --obviously-- + * to set signal handlers from inside gdb, or restart the kernel with a + * signal. + * + * Current limitations: + * + * - While the kernel is stopped, interrupts are disabled for safety reasons + * (i.e., variables not changing magically or the like). But this also + * means that the clock isn't running anymore, and that interrupts from the + * hardware may get lost/not be served in time. This can cause some device + * errors... + * + * - When single-stepping, only one instruction of the current thread is + * executed, but interrupts are allowed for that time and will be serviced + * if pending. Be prepared for that. + * + * - All debugging happens in kernel virtual address space. There's no way to + * access physical memory not mapped in kernel space, or to access user + * space. A way to work around this is using get_user_long & Co. in gdb + * expressions, but only for the current process. + * + * - Interrupting the kernel only works if interrupts are currently allowed, + * and the interrupt of the serial line isn't blocked by some other means + * (IPL too high, disabled, ...) + * + * - The gdb stub is currently not reentrant, i.e. errors that happen therein + * (e.g. accessing invalid memory) may not be caught correctly. This could + * be removed in future by introducing a stack of struct registers. + * + */ + +/* + * To enable debugger support, two things need to happen. One, a + * call to kgdb_init() is necessary in order to allow any breakpoints + * or error conditions to be properly intercepted and reported to gdb. + * Two, a breakpoint needs to be generated to begin communication. This + * is most easily accomplished by a call to breakpoint(). + * + * The following gdb commands are supported: + * + * command function Return value + * + * g return the value of the CPU registers hex data or ENN + * G set the value of the CPU registers OK or ENN + * + * mAA..AA,LLLL Read LLLL bytes at address AA..AA hex data or ENN + * MAA..AA,LLLL: Write LLLL bytes at address AA.AA OK or ENN + * + * c Resume at current address SNN ( signal NN) + * cAA..AA Continue at address AA..AA SNN + * + * s Step one instruction SNN + * sAA..AA Step one instruction from AA..AA SNN + * + * k kill + * + * ? What was the last sigval ? SNN (signal NN) + * + * bBB..BB Set baud rate to BB..BB OK or BNN, then sets + * baud rate + * + * All commands and responses are sent with a packet which includes a + * checksum. A packet consists of + * + * $<packet info>#<checksum>. + * + * where + * <packet info> :: <characters representing the command or response> + * <checksum> :: < two hex digits computed as modulo 256 sum of <packetinfo>> + * + * When a packet is received, it is first acknowledged with either '+' or '-'. + * '+' indicates a successful transfer. '-' indicates a failed transfer. + * + * Example: + * + * Host: Reply: + * $m0,10#2a +$00010203040506070809101112131415#42 + * + */ + + +#include <linux/string.h> +#include <linux/signal.h> +#include <linux/kernel.h> +#include <linux/delay.h> +#include <linux/linkage.h> +#include <linux/reboot.h> + +#include <asm/setup.h> +#include <asm/ptrace.h> + +#include <arch/svinto.h> +#include <asm/irq.h> + +static int kgdb_started = 0; + +/********************************* Register image ****************************/ +/* Use the order of registers as defined in "AXIS ETRAX CRIS Programmer's + Reference", p. 1-1, with the additional register definitions of the + ETRAX 100LX in cris-opc.h. + There are 16 general 32-bit registers, R0-R15, where R14 is the stack + pointer, SP, and R15 is the program counter, PC. + There are 16 special registers, P0-P15, where three of the unimplemented + registers, P0, P4 and P8, are reserved as zero-registers. A read from + any of these registers returns zero and a write has no effect. */ + +typedef +struct register_image +{ + /* Offset */ + unsigned int r0; /* 0x00 */ + unsigned int r1; /* 0x04 */ + unsigned int r2; /* 0x08 */ + unsigned int r3; /* 0x0C */ + unsigned int r4; /* 0x10 */ + unsigned int r5; /* 0x14 */ + unsigned int r6; /* 0x18 */ + unsigned int r7; /* 0x1C */ + unsigned int r8; /* 0x20 Frame pointer */ + unsigned int r9; /* 0x24 */ + unsigned int r10; /* 0x28 */ + unsigned int r11; /* 0x2C */ + unsigned int r12; /* 0x30 */ + unsigned int r13; /* 0x34 */ + unsigned int sp; /* 0x38 Stack pointer */ + unsigned int pc; /* 0x3C Program counter */ + + unsigned char p0; /* 0x40 8-bit zero-register */ + unsigned char vr; /* 0x41 Version register */ + + unsigned short p4; /* 0x42 16-bit zero-register */ + unsigned short ccr; /* 0x44 Condition code register */ + + unsigned int mof; /* 0x46 Multiply overflow register */ + + unsigned int p8; /* 0x4A 32-bit zero-register */ + unsigned int ibr; /* 0x4E Interrupt base register */ + unsigned int irp; /* 0x52 Interrupt return pointer */ + unsigned int srp; /* 0x56 Subroutine return pointer */ + unsigned int bar; /* 0x5A Breakpoint address register */ + unsigned int dccr; /* 0x5E Double condition code register */ + unsigned int brp; /* 0x62 Breakpoint return pointer (pc in caller) */ + unsigned int usp; /* 0x66 User mode stack pointer */ +} registers; + +/* Serial port, reads one character. ETRAX 100 specific. from debugport.c */ +int getDebugChar (void); + +/* Serial port, writes one character. ETRAX 100 specific. from debugport.c */ +void putDebugChar (int val); + +void enableDebugIRQ (void); + +/******************** Prototypes for global functions. ***********************/ + +/* The string str is prepended with the GDB printout token and sent. */ +void putDebugString (const unsigned char *str, int length); /* used by etrax100ser.c */ + +/* The hook for both static (compiled) and dynamic breakpoints set by GDB. + ETRAX 100 specific. */ +void handle_breakpoint (void); /* used by irq.c */ + +/* The hook for an interrupt generated by GDB. ETRAX 100 specific. */ +void handle_interrupt (void); /* used by irq.c */ + +/* A static breakpoint to be used at startup. */ +void breakpoint (void); /* called by init/main.c */ + +/* From osys_int.c, executing_task contains the number of the current + executing task in osys. Does not know of object-oriented threads. */ +extern unsigned char executing_task; + +/* The number of characters used for a 64 bit thread identifier. */ +#define HEXCHARS_IN_THREAD_ID 16 + +/********************************** Packet I/O ******************************/ +/* BUFMAX defines the maximum number of characters in + inbound/outbound buffers */ +#define BUFMAX 512 + +/* Run-length encoding maximum length. Send 64 at most. */ +#define RUNLENMAX 64 + +/* The inbound/outbound buffers used in packet I/O */ +static char remcomInBuffer[BUFMAX]; +static char remcomOutBuffer[BUFMAX]; + +/* Error and warning messages. */ +enum error_type +{ + SUCCESS, E01, E02, E03, E04, E05, E06, E07 +}; +static char *error_message[] = +{ + "", + "E01 Set current or general thread - H[c,g] - internal error.", + "E02 Change register content - P - cannot change read-only register.", + "E03 Thread is not alive.", /* T, not used. */ + "E04 The command is not supported - [s,C,S,!,R,d,r] - internal error.", + "E05 Change register content - P - the register is not implemented..", + "E06 Change memory content - M - internal error.", + "E07 Change register content - P - the register is not stored on the stack" +}; +/********************************* Register image ****************************/ +/* Use the order of registers as defined in "AXIS ETRAX CRIS Programmer's + Reference", p. 1-1, with the additional register definitions of the + ETRAX 100LX in cris-opc.h. + There are 16 general 32-bit registers, R0-R15, where R14 is the stack + pointer, SP, and R15 is the program counter, PC. + There are 16 special registers, P0-P15, where three of the unimplemented + registers, P0, P4 and P8, are reserved as zero-registers. A read from + any of these registers returns zero and a write has no effect. */ +enum register_name +{ + R0, R1, R2, R3, + R4, R5, R6, R7, + R8, R9, R10, R11, + R12, R13, SP, PC, + P0, VR, P2, P3, + P4, CCR, P6, MOF, + P8, IBR, IRP, SRP, + BAR, DCCR, BRP, USP +}; + +/* The register sizes of the registers in register_name. An unimplemented register + is designated by size 0 in this array. */ +static int register_size[] = +{ + 4, 4, 4, 4, + 4, 4, 4, 4, + 4, 4, 4, 4, + 4, 4, 4, 4, + 1, 1, 0, 0, + 2, 2, 0, 4, + 4, 4, 4, 4, + 4, 4, 4, 4 +}; + +/* Contains the register image of the executing thread in the assembler + part of the code in order to avoid horrible addressing modes. */ +registers cris_reg; + +/* FIXME: Should this be used? Delete otherwise. */ +/* Contains the assumed consistency state of the register image. Uses the + enum error_type for state information. */ +static int consistency_status = SUCCESS; + +/********************************** Handle exceptions ************************/ +/* The variable cris_reg contains the register image associated with the + current_thread_c variable. It is a complete register image created at + entry. The reg_g contains a register image of a task where the general + registers are taken from the stack and all special registers are taken + from the executing task. It is associated with current_thread_g and used + in order to provide access mainly for 'g', 'G' and 'P'. +*/ + +/********************************** Breakpoint *******************************/ +/* Use an internal stack in the breakpoint and interrupt response routines */ +#define INTERNAL_STACK_SIZE 1024 +char internal_stack[INTERNAL_STACK_SIZE]; + +/* Due to the breakpoint return pointer, a state variable is needed to keep + track of whether it is a static (compiled) or dynamic (gdb-invoked) + breakpoint to be handled. A static breakpoint uses the content of register + BRP as it is whereas a dynamic breakpoint requires subtraction with 2 + in order to execute the instruction. The first breakpoint is static. */ +static unsigned char is_dyn_brkp = 0; + +/********************************* String library ****************************/ +/* Single-step over library functions creates trap loops. */ + +/* Copy char s2[] to s1[]. */ +static char* +gdb_cris_strcpy (char *s1, const char *s2) +{ + char *s = s1; + + for (s = s1; (*s++ = *s2++) != '\0'; ) + ; + return (s1); +} + +/* Find length of s[]. */ +static int +gdb_cris_strlen (const char *s) +{ + const char *sc; + + for (sc = s; *sc != '\0'; sc++) + ; + return (sc - s); +} + +/* Find first occurrence of c in s[n]. */ +static void* +gdb_cris_memchr (const void *s, int c, int n) +{ + const unsigned char uc = c; + const unsigned char *su; + + for (su = s; 0 < n; ++su, --n) + if (*su == uc) + return ((void *)su); + return (NULL); +} +/******************************* Standard library ****************************/ +/* Single-step over library functions creates trap loops. */ +/* Convert string to long. */ +static int +gdb_cris_strtol (const char *s, char **endptr, int base) +{ + char *s1; + char *sd; + int x = 0; + + for (s1 = (char*)s; (sd = gdb_cris_memchr(hex_asc, *s1, base)) != NULL; ++s1) + x = x * base + (sd - hex_asc); + + if (endptr) + { + /* Unconverted suffix is stored in endptr unless endptr is NULL. */ + *endptr = s1; + } + + return x; +} + +/********************************** Packet I/O ******************************/ +/* Returns the integer equivalent of a hexadecimal character. */ +static int +hex (char ch) +{ + if ((ch >= 'a') && (ch <= 'f')) + return (ch - 'a' + 10); + if ((ch >= '0') && (ch <= '9')) + return (ch - '0'); + if ((ch >= 'A') && (ch <= 'F')) + return (ch - 'A' + 10); + return (-1); +} + +/* Convert the memory, pointed to by mem into hexadecimal representation. + Put the result in buf, and return a pointer to the last character + in buf (null). */ + +static char * +mem2hex(char *buf, unsigned char *mem, int count) +{ + int i; + int ch; + + if (mem == NULL) { + /* Bogus read from m0. FIXME: What constitutes a valid address? */ + for (i = 0; i < count; i++) { + *buf++ = '0'; + *buf++ = '0'; + } + } else { + /* Valid mem address. */ + for (i = 0; i < count; i++) { + ch = *mem++; + buf = hex_byte_pack(buf, ch); + } + } + + /* Terminate properly. */ + *buf = '\0'; + return (buf); +} + +/* Convert the array, in hexadecimal representation, pointed to by buf into + binary representation. Put the result in mem, and return a pointer to + the character after the last byte written. */ +static unsigned char* +hex2mem (unsigned char *mem, char *buf, int count) +{ + int i; + unsigned char ch; + for (i = 0; i < count; i++) { + ch = hex (*buf++) << 4; + ch = ch + hex (*buf++); + *mem++ = ch; + } + return (mem); +} + +/* Put the content of the array, in binary representation, pointed to by buf + into memory pointed to by mem, and return a pointer to the character after + the last byte written. + Gdb will escape $, #, and the escape char (0x7d). */ +static unsigned char* +bin2mem (unsigned char *mem, unsigned char *buf, int count) +{ + int i; + unsigned char *next; + for (i = 0; i < count; i++) { + /* Check for any escaped characters. Be paranoid and + only unescape chars that should be escaped. */ + if (*buf == 0x7d) { + next = buf + 1; + if (*next == 0x3 || *next == 0x4 || *next == 0x5D) /* #, $, ESC */ + { + buf++; + *buf += 0x20; + } + } + *mem++ = *buf++; + } + return (mem); +} + +/* Await the sequence $<data>#<checksum> and store <data> in the array buffer + returned. */ +static void +getpacket (char *buffer) +{ + unsigned char checksum; + unsigned char xmitcsum; + int i; + int count; + char ch; + do { + while ((ch = getDebugChar ()) != '$') + /* Wait for the start character $ and ignore all other characters */; + checksum = 0; + xmitcsum = -1; + count = 0; + /* Read until a # or the end of the buffer is reached */ + while (count < BUFMAX - 1) { + ch = getDebugChar (); + if (ch == '#') + break; + checksum = checksum + ch; + buffer[count] = ch; + count = count + 1; + } + buffer[count] = '\0'; + + if (ch == '#') { + xmitcsum = hex (getDebugChar ()) << 4; + xmitcsum += hex (getDebugChar ()); + if (checksum != xmitcsum) { + /* Wrong checksum */ + putDebugChar ('-'); + } + else { + /* Correct checksum */ + putDebugChar ('+'); + /* If sequence characters are received, reply with them */ + if (buffer[2] == ':') { + putDebugChar (buffer[0]); + putDebugChar (buffer[1]); + /* Remove the sequence characters from the buffer */ + count = gdb_cris_strlen (buffer); + for (i = 3; i <= count; i++) + buffer[i - 3] = buffer[i]; + } + } + } + } while (checksum != xmitcsum); +} + +/* Send $<data>#<checksum> from the <data> in the array buffer. */ + +static void +putpacket(char *buffer) +{ + int checksum; + int runlen; + int encode; + + do { + char *src = buffer; + putDebugChar ('$'); + checksum = 0; + while (*src) { + /* Do run length encoding */ + putDebugChar (*src); + checksum += *src; + runlen = 0; + while (runlen < RUNLENMAX && *src == src[runlen]) { + runlen++; + } + if (runlen > 3) { + /* Got a useful amount */ + putDebugChar ('*'); + checksum += '*'; + encode = runlen + ' ' - 4; + putDebugChar (encode); + checksum += encode; + src += runlen; + } + else { + src++; + } + } + putDebugChar('#'); + putDebugChar(hex_asc_hi(checksum)); + putDebugChar(hex_asc_lo(checksum)); + } while(kgdb_started && (getDebugChar() != '+')); +} + +/* The string str is prepended with the GDB printout token and sent. Required + in traditional implementations. */ +void +putDebugString (const unsigned char *str, int length) +{ + remcomOutBuffer[0] = 'O'; + mem2hex(&remcomOutBuffer[1], (unsigned char *)str, length); + putpacket(remcomOutBuffer); +} + +/********************************* Register image ****************************/ +/* Write a value to a specified register in the register image of the current + thread. Returns status code SUCCESS, E02 or E05. */ +static int +write_register (int regno, char *val) +{ + int status = SUCCESS; + registers *current_reg = &cris_reg; + + if (regno >= R0 && regno <= PC) { + /* 32-bit register with simple offset. */ + hex2mem ((unsigned char *)current_reg + regno * sizeof(unsigned int), + val, sizeof(unsigned int)); + } + else if (regno == P0 || regno == VR || regno == P4 || regno == P8) { + /* Do not support read-only registers. */ + status = E02; + } + else if (regno == CCR) { + /* 16 bit register with complex offset. (P4 is read-only, P6 is not implemented, + and P7 (MOF) is 32 bits in ETRAX 100LX. */ + hex2mem ((unsigned char *)&(current_reg->ccr) + (regno-CCR) * sizeof(unsigned short), + val, sizeof(unsigned short)); + } + else if (regno >= MOF && regno <= USP) { + /* 32 bit register with complex offset. (P8 has been taken care of.) */ + hex2mem ((unsigned char *)&(current_reg->ibr) + (regno-IBR) * sizeof(unsigned int), + val, sizeof(unsigned int)); + } + else { + /* Do not support nonexisting or unimplemented registers (P2, P3, and P6). */ + status = E05; + } + return status; +} + +/* Read a value from a specified register in the register image. Returns the + value in the register or -1 for non-implemented registers. + Should check consistency_status after a call which may be E05 after changes + in the implementation. */ +static int +read_register (char regno, unsigned int *valptr) +{ + registers *current_reg = &cris_reg; + + if (regno >= R0 && regno <= PC) { + /* 32-bit register with simple offset. */ + *valptr = *(unsigned int *)((char *)current_reg + regno * sizeof(unsigned int)); + return SUCCESS; + } + else if (regno == P0 || regno == VR) { + /* 8 bit register with complex offset. */ + *valptr = (unsigned int)(*(unsigned char *) + ((char *)&(current_reg->p0) + (regno-P0) * sizeof(char))); + return SUCCESS; + } + else if (regno == P4 || regno == CCR) { + /* 16 bit register with complex offset. */ + *valptr = (unsigned int)(*(unsigned short *) + ((char *)&(current_reg->p4) + (regno-P4) * sizeof(unsigned short))); + return SUCCESS; + } + else if (regno >= MOF && regno <= USP) { + /* 32 bit register with complex offset. */ + *valptr = *(unsigned int *)((char *)&(current_reg->p8) + + (regno-P8) * sizeof(unsigned int)); + return SUCCESS; + } + else { + /* Do not support nonexisting or unimplemented registers (P2, P3, and P6). */ + consistency_status = E05; + return E05; + } +} + +/********************************** Handle exceptions ************************/ +/* Build and send a response packet in order to inform the host the + stub is stopped. TAAn...:r...;n...:r...;n...:r...; + AA = signal number + n... = register number (hex) + r... = register contents + n... = `thread' + r... = thread process ID. This is a hex integer. + n... = other string not starting with valid hex digit. + gdb should ignore this n,r pair and go on to the next. + This way we can extend the protocol. */ +static void +stub_is_stopped(int sigval) +{ + char *ptr = remcomOutBuffer; + int regno; + + unsigned int reg_cont; + int status; + + /* Send trap type (converted to signal) */ + + *ptr++ = 'T'; + ptr = hex_byte_pack(ptr, sigval); + + /* Send register contents. We probably only need to send the + * PC, frame pointer and stack pointer here. Other registers will be + * explicitly asked for. But for now, send all. + */ + + for (regno = R0; regno <= USP; regno++) { + /* Store n...:r...; for the registers in the buffer. */ + + status = read_register (regno, ®_cont); + + if (status == SUCCESS) { + ptr = hex_byte_pack(ptr, regno); + *ptr++ = ':'; + + ptr = mem2hex(ptr, (unsigned char *)®_cont, + register_size[regno]); + *ptr++ = ';'; + } + + } + + /* null-terminate and send it off */ + + *ptr = 0; + + putpacket (remcomOutBuffer); +} + +/* Performs a complete re-start from scratch. */ +static void +kill_restart (void) +{ + machine_restart(""); +} + +/* All expected commands are sent from remote.c. Send a response according + to the description in remote.c. */ +void +handle_exception (int sigval) +{ + /* Send response. */ + + stub_is_stopped (sigval); + + for (;;) { + remcomOutBuffer[0] = '\0'; + getpacket (remcomInBuffer); + switch (remcomInBuffer[0]) { + case 'g': + /* Read registers: g + Success: Each byte of register data is described by two hex digits. + Registers are in the internal order for GDB, and the bytes + in a register are in the same order the machine uses. + Failure: void. */ + + mem2hex(remcomOutBuffer, (char *)&cris_reg, sizeof(registers)); + break; + + case 'G': + /* Write registers. GXX..XX + Each byte of register data is described by two hex digits. + Success: OK + Failure: void. */ + hex2mem((char *)&cris_reg, &remcomInBuffer[1], sizeof(registers)); + gdb_cris_strcpy (remcomOutBuffer, "OK"); + break; + + case 'P': + /* Write register. Pn...=r... + Write register n..., hex value without 0x, with value r..., + which contains a hex value without 0x and two hex digits + for each byte in the register (target byte order). P1f=11223344 means + set register 31 to 44332211. + Success: OK + Failure: E02, E05 */ + { + char *suffix; + int regno = gdb_cris_strtol (&remcomInBuffer[1], &suffix, 16); + int status; + status = write_register (regno, suffix+1); + + switch (status) { + case E02: + /* Do not support read-only registers. */ + gdb_cris_strcpy (remcomOutBuffer, error_message[E02]); + break; + case E05: + /* Do not support non-existing registers. */ + gdb_cris_strcpy (remcomOutBuffer, error_message[E05]); + break; + case E07: + /* Do not support non-existing registers on the stack. */ + gdb_cris_strcpy (remcomOutBuffer, error_message[E07]); + break; + default: + /* Valid register number. */ + gdb_cris_strcpy (remcomOutBuffer, "OK"); + break; + } + } + break; + + case 'm': + /* Read from memory. mAA..AA,LLLL + AA..AA is the address and LLLL is the length. + Success: XX..XX is the memory content. Can be fewer bytes than + requested if only part of the data may be read. m6000120a,6c means + retrieve 108 byte from base address 6000120a. + Failure: void. */ + { + char *suffix; + unsigned char *addr = (unsigned char *)gdb_cris_strtol(&remcomInBuffer[1], + &suffix, 16); int length = gdb_cris_strtol(suffix+1, 0, 16); + + mem2hex(remcomOutBuffer, addr, length); + } + break; + + case 'X': + /* Write to memory. XAA..AA,LLLL:XX..XX + AA..AA is the start address, LLLL is the number of bytes, and + XX..XX is the binary data. + Success: OK + Failure: void. */ + case 'M': + /* Write to memory. MAA..AA,LLLL:XX..XX + AA..AA is the start address, LLLL is the number of bytes, and + XX..XX is the hexadecimal data. + Success: OK + Failure: void. */ + { + char *lenptr; + char *dataptr; + unsigned char *addr = (unsigned char *)gdb_cris_strtol(&remcomInBuffer[1], + &lenptr, 16); + int length = gdb_cris_strtol(lenptr+1, &dataptr, 16); + if (*lenptr == ',' && *dataptr == ':') { + if (remcomInBuffer[0] == 'M') { + hex2mem(addr, dataptr + 1, length); + } + else /* X */ { + bin2mem(addr, dataptr + 1, length); + } + gdb_cris_strcpy (remcomOutBuffer, "OK"); + } + else { + gdb_cris_strcpy (remcomOutBuffer, error_message[E06]); + } + } + break; + + case 'c': + /* Continue execution. cAA..AA + AA..AA is the address where execution is resumed. If AA..AA is + omitted, resume at the present address. + Success: return to the executing thread. + Failure: will never know. */ + if (remcomInBuffer[1] != '\0') { + cris_reg.pc = gdb_cris_strtol (&remcomInBuffer[1], 0, 16); + } + enableDebugIRQ(); + return; + + case 's': + /* Step. sAA..AA + AA..AA is the address where execution is resumed. If AA..AA is + omitted, resume at the present address. Success: return to the + executing thread. Failure: will never know. + + Should never be invoked. The single-step is implemented on + the host side. If ever invoked, it is an internal error E04. */ + gdb_cris_strcpy (remcomOutBuffer, error_message[E04]); + putpacket (remcomOutBuffer); + return; + + case '?': + /* The last signal which caused a stop. ? + Success: SAA, where AA is the signal number. + Failure: void. */ + remcomOutBuffer[0] = 'S'; + remcomOutBuffer[1] = hex_asc_hi(sigval); + remcomOutBuffer[2] = hex_asc_lo(sigval); + remcomOutBuffer[3] = 0; + break; + + case 'D': + /* Detach from host. D + Success: OK, and return to the executing thread. + Failure: will never know */ + putpacket ("OK"); + return; + + case 'k': + case 'r': + /* kill request or reset request. + Success: restart of target. + Failure: will never know. */ + kill_restart (); + break; + + case 'C': + case 'S': + case '!': + case 'R': + case 'd': + /* Continue with signal sig. Csig;AA..AA + Step with signal sig. Ssig;AA..AA + Use the extended remote protocol. ! + Restart the target system. R0 + Toggle debug flag. d + Search backwards. tAA:PP,MM + Not supported: E04 */ + gdb_cris_strcpy (remcomOutBuffer, error_message[E04]); + break; + + default: + /* The stub should ignore other request and send an empty + response ($#<checksum>). This way we can extend the protocol and GDB + can tell whether the stub it is talking to uses the old or the new. */ + remcomOutBuffer[0] = 0; + break; + } + putpacket(remcomOutBuffer); + } +} + +/********************************** Breakpoint *******************************/ +/* The hook for both a static (compiled) and a dynamic breakpoint set by GDB. + An internal stack is used by the stub. The register image of the caller is + stored in the structure register_image. + Interactive communication with the host is handled by handle_exception and + finally the register image is restored. */ + +void kgdb_handle_breakpoint(void); + +asm ("\n" +" .global kgdb_handle_breakpoint\n" +"kgdb_handle_breakpoint:\n" +";;\n" +";; Response to the break-instruction\n" +";;\n" +";; Create a register image of the caller\n" +";;\n" +" move $dccr,[cris_reg+0x5E] ; Save the flags in DCCR before disable interrupts\n" +" di ; Disable interrupts\n" +" move.d $r0,[cris_reg] ; Save R0\n" +" move.d $r1,[cris_reg+0x04] ; Save R1\n" +" move.d $r2,[cris_reg+0x08] ; Save R2\n" +" move.d $r3,[cris_reg+0x0C] ; Save R3\n" +" move.d $r4,[cris_reg+0x10] ; Save R4\n" +" move.d $r5,[cris_reg+0x14] ; Save R5\n" +" move.d $r6,[cris_reg+0x18] ; Save R6\n" +" move.d $r7,[cris_reg+0x1C] ; Save R7\n" +" move.d $r8,[cris_reg+0x20] ; Save R8\n" +" move.d $r9,[cris_reg+0x24] ; Save R9\n" +" move.d $r10,[cris_reg+0x28] ; Save R10\n" +" move.d $r11,[cris_reg+0x2C] ; Save R11\n" +" move.d $r12,[cris_reg+0x30] ; Save R12\n" +" move.d $r13,[cris_reg+0x34] ; Save R13\n" +" move.d $sp,[cris_reg+0x38] ; Save SP (R14)\n" +";; Due to the old assembler-versions BRP might not be recognized\n" +" .word 0xE670 ; move brp,$r0\n" +" subq 2,$r0 ; Set to address of previous instruction.\n" +" move.d $r0,[cris_reg+0x3c] ; Save the address in PC (R15)\n" +" clear.b [cris_reg+0x40] ; Clear P0\n" +" move $vr,[cris_reg+0x41] ; Save special register P1\n" +" clear.w [cris_reg+0x42] ; Clear P4\n" +" move $ccr,[cris_reg+0x44] ; Save special register CCR\n" +" move $mof,[cris_reg+0x46] ; P7\n" +" clear.d [cris_reg+0x4A] ; Clear P8\n" +" move $ibr,[cris_reg+0x4E] ; P9,\n" +" move $irp,[cris_reg+0x52] ; P10,\n" +" move $srp,[cris_reg+0x56] ; P11,\n" +" move $dtp0,[cris_reg+0x5A] ; P12, register BAR, assembler might not know BAR\n" +" ; P13, register DCCR already saved\n" +";; Due to the old assembler-versions BRP might not be recognized\n" +" .word 0xE670 ; move brp,r0\n" +";; Static (compiled) breakpoints must return to the next instruction in order\n" +";; to avoid infinite loops. Dynamic (gdb-invoked) must restore the instruction\n" +";; in order to execute it when execution is continued.\n" +" test.b [is_dyn_brkp] ; Is this a dynamic breakpoint?\n" +" beq is_static ; No, a static breakpoint\n" +" nop\n" +" subq 2,$r0 ; rerun the instruction the break replaced\n" +"is_static:\n" +" moveq 1,$r1\n" +" move.b $r1,[is_dyn_brkp] ; Set the state variable to dynamic breakpoint\n" +" move.d $r0,[cris_reg+0x62] ; Save the return address in BRP\n" +" move $usp,[cris_reg+0x66] ; USP\n" +";;\n" +";; Handle the communication\n" +";;\n" +" move.d internal_stack+1020,$sp ; Use the internal stack which grows upward\n" +" moveq 5,$r10 ; SIGTRAP\n" +" jsr handle_exception ; Interactive routine\n" +";;\n" +";; Return to the caller\n" +";;\n" +" move.d [cris_reg],$r0 ; Restore R0\n" +" move.d [cris_reg+0x04],$r1 ; Restore R1\n" +" move.d [cris_reg+0x08],$r2 ; Restore R2\n" +" move.d [cris_reg+0x0C],$r3 ; Restore R3\n" +" move.d [cris_reg+0x10],$r4 ; Restore R4\n" +" move.d [cris_reg+0x14],$r5 ; Restore R5\n" +" move.d [cris_reg+0x18],$r6 ; Restore R6\n" +" move.d [cris_reg+0x1C],$r7 ; Restore R7\n" +" move.d [cris_reg+0x20],$r8 ; Restore R8\n" +" move.d [cris_reg+0x24],$r9 ; Restore R9\n" +" move.d [cris_reg+0x28],$r10 ; Restore R10\n" +" move.d [cris_reg+0x2C],$r11 ; Restore R11\n" +" move.d [cris_reg+0x30],$r12 ; Restore R12\n" +" move.d [cris_reg+0x34],$r13 ; Restore R13\n" +";;\n" +";; FIXME: Which registers should be restored?\n" +";;\n" +" move.d [cris_reg+0x38],$sp ; Restore SP (R14)\n" +" move [cris_reg+0x56],$srp ; Restore the subroutine return pointer.\n" +" move [cris_reg+0x5E],$dccr ; Restore DCCR\n" +" move [cris_reg+0x66],$usp ; Restore USP\n" +" jump [cris_reg+0x62] ; A jump to the content in register BRP works.\n" +" nop ;\n" +"\n"); + +/* The hook for an interrupt generated by GDB. An internal stack is used + by the stub. The register image of the caller is stored in the structure + register_image. Interactive communication with the host is handled by + handle_exception and finally the register image is restored. Due to the + old assembler which does not recognise the break instruction and the + breakpoint return pointer hex-code is used. */ + +void kgdb_handle_serial(void); + +asm ("\n" +" .global kgdb_handle_serial\n" +"kgdb_handle_serial:\n" +";;\n" +";; Response to a serial interrupt\n" +";;\n" +"\n" +" move $dccr,[cris_reg+0x5E] ; Save the flags in DCCR\n" +" di ; Disable interrupts\n" +" move.d $r0,[cris_reg] ; Save R0\n" +" move.d $r1,[cris_reg+0x04] ; Save R1\n" +" move.d $r2,[cris_reg+0x08] ; Save R2\n" +" move.d $r3,[cris_reg+0x0C] ; Save R3\n" +" move.d $r4,[cris_reg+0x10] ; Save R4\n" +" move.d $r5,[cris_reg+0x14] ; Save R5\n" +" move.d $r6,[cris_reg+0x18] ; Save R6\n" +" move.d $r7,[cris_reg+0x1C] ; Save R7\n" +" move.d $r8,[cris_reg+0x20] ; Save R8\n" +" move.d $r9,[cris_reg+0x24] ; Save R9\n" +" move.d $r10,[cris_reg+0x28] ; Save R10\n" +" move.d $r11,[cris_reg+0x2C] ; Save R11\n" +" move.d $r12,[cris_reg+0x30] ; Save R12\n" +" move.d $r13,[cris_reg+0x34] ; Save R13\n" +" move.d $sp,[cris_reg+0x38] ; Save SP (R14)\n" +" move $irp,[cris_reg+0x3c] ; Save the address in PC (R15)\n" +" clear.b [cris_reg+0x40] ; Clear P0\n" +" move $vr,[cris_reg+0x41] ; Save special register P1,\n" +" clear.w [cris_reg+0x42] ; Clear P4\n" +" move $ccr,[cris_reg+0x44] ; Save special register CCR\n" +" move $mof,[cris_reg+0x46] ; P7\n" +" clear.d [cris_reg+0x4A] ; Clear P8\n" +" move $ibr,[cris_reg+0x4E] ; P9,\n" +" move $irp,[cris_reg+0x52] ; P10,\n" +" move $srp,[cris_reg+0x56] ; P11,\n" +" move $dtp0,[cris_reg+0x5A] ; P12, register BAR, assembler might not know BAR\n" +" ; P13, register DCCR already saved\n" +";; Due to the old assembler-versions BRP might not be recognized\n" +" .word 0xE670 ; move brp,r0\n" +" move.d $r0,[cris_reg+0x62] ; Save the return address in BRP\n" +" move $usp,[cris_reg+0x66] ; USP\n" +"\n" +";; get the serial character (from debugport.c) and check if it is a ctrl-c\n" +"\n" +" jsr getDebugChar\n" +" cmp.b 3, $r10\n" +" bne goback\n" +" nop\n" +"\n" +" move.d [cris_reg+0x5E], $r10 ; Get DCCR\n" +" btstq 8, $r10 ; Test the U-flag.\n" +" bmi goback\n" +" nop\n" +"\n" +";;\n" +";; Handle the communication\n" +";;\n" +" move.d internal_stack+1020,$sp ; Use the internal stack\n" +" moveq 2,$r10 ; SIGINT\n" +" jsr handle_exception ; Interactive routine\n" +"\n" +"goback:\n" +";;\n" +";; Return to the caller\n" +";;\n" +" move.d [cris_reg],$r0 ; Restore R0\n" +" move.d [cris_reg+0x04],$r1 ; Restore R1\n" +" move.d [cris_reg+0x08],$r2 ; Restore R2\n" +" move.d [cris_reg+0x0C],$r3 ; Restore R3\n" +" move.d [cris_reg+0x10],$r4 ; Restore R4\n" +" move.d [cris_reg+0x14],$r5 ; Restore R5\n" +" move.d [cris_reg+0x18],$r6 ; Restore R6\n" +" move.d [cris_reg+0x1C],$r7 ; Restore R7\n" +" move.d [cris_reg+0x20],$r8 ; Restore R8\n" +" move.d [cris_reg+0x24],$r9 ; Restore R9\n" +" move.d [cris_reg+0x28],$r10 ; Restore R10\n" +" move.d [cris_reg+0x2C],$r11 ; Restore R11\n" +" move.d [cris_reg+0x30],$r12 ; Restore R12\n" +" move.d [cris_reg+0x34],$r13 ; Restore R13\n" +";;\n" +";; FIXME: Which registers should be restored?\n" +";;\n" +" move.d [cris_reg+0x38],$sp ; Restore SP (R14)\n" +" move [cris_reg+0x56],$srp ; Restore the subroutine return pointer.\n" +" move [cris_reg+0x5E],$dccr ; Restore DCCR\n" +" move [cris_reg+0x66],$usp ; Restore USP\n" +" reti ; Return from the interrupt routine\n" +" nop\n" +"\n"); + +/* Use this static breakpoint in the start-up only. */ + +void +breakpoint(void) +{ + kgdb_started = 1; + is_dyn_brkp = 0; /* This is a static, not a dynamic breakpoint. */ + __asm__ volatile ("break 8"); /* Jump to handle_breakpoint. */ +} + +/* initialize kgdb. doesn't break into the debugger, but sets up irq and ports */ + +void +kgdb_init(void) +{ + /* could initialize debug port as well but it's done in head.S already... */ + + /* breakpoint handler is now set in irq.c */ + set_int_vector(8, kgdb_handle_serial); + + enableDebugIRQ(); +} + +/****************************** End of file **********************************/ diff --git a/kernel/arch/cris/arch-v10/kernel/process.c b/kernel/arch/cris/arch-v10/kernel/process.c new file mode 100644 index 000000000..02b783457 --- /dev/null +++ b/kernel/arch/cris/arch-v10/kernel/process.c @@ -0,0 +1,193 @@ +/* + * linux/arch/cris/kernel/process.c + * + * Copyright (C) 1995 Linus Torvalds + * Copyright (C) 2000-2002 Axis Communications AB + * + * Authors: Bjorn Wesen (bjornw@axis.com) + * Mikael Starvik (starvik@axis.com) + * + * This file handles the architecture-dependent parts of process handling.. + */ + +#include <linux/sched.h> +#include <linux/slab.h> +#include <linux/err.h> +#include <linux/fs.h> +#include <arch/svinto.h> +#include <linux/init.h> +#include <arch/system.h> +#include <linux/ptrace.h> + +#ifdef CONFIG_ETRAX_GPIO +void etrax_gpio_wake_up_check(void); /* drivers/gpio.c */ +#endif + +/* + * We use this if we don't have any better + * idle routine.. + */ +void default_idle(void) +{ +#ifdef CONFIG_ETRAX_GPIO + etrax_gpio_wake_up_check(); +#endif + local_irq_enable(); +} + +/* + * Free current thread data structures etc.. + */ + +void exit_thread(void) +{ + /* Nothing needs to be done. */ +} + +/* if the watchdog is enabled, we can simply disable interrupts and go + * into an eternal loop, and the watchdog will reset the CPU after 0.1s + * if on the other hand the watchdog wasn't enabled, we just enable it and wait + */ + +void hard_reset_now (void) +{ + /* + * Don't declare this variable elsewhere. We don't want any other + * code to know about it than the watchdog handler in entry.S and + * this code, implementing hard reset through the watchdog. + */ +#if defined(CONFIG_ETRAX_WATCHDOG) + extern int cause_of_death; +#endif + + printk("*** HARD RESET ***\n"); + local_irq_disable(); + +#if defined(CONFIG_ETRAX_WATCHDOG) + cause_of_death = 0xbedead; +#else + /* Since we dont plan to keep on resetting the watchdog, + the key can be arbitrary hence three */ + *R_WATCHDOG = IO_FIELD(R_WATCHDOG, key, 3) | + IO_STATE(R_WATCHDOG, enable, start); +#endif + + while(1) /* waiting for RETRIBUTION! */ ; +} + +/* + * Return saved PC of a blocked thread. + */ +unsigned long thread_saved_pc(struct task_struct *t) +{ + return task_pt_regs(t)->irp; +} + +/* setup the child's kernel stack with a pt_regs and switch_stack on it. + * it will be un-nested during _resume and _ret_from_sys_call when the + * new thread is scheduled. + * + * also setup the thread switching structure which is used to keep + * thread-specific data during _resumes. + * + */ +asmlinkage void ret_from_fork(void); +asmlinkage void ret_from_kernel_thread(void); + +int copy_thread(unsigned long clone_flags, unsigned long usp, + unsigned long arg, struct task_struct *p) +{ + struct pt_regs *childregs = task_pt_regs(p); + struct switch_stack *swstack = ((struct switch_stack *)childregs) - 1; + + /* put the pt_regs structure at the end of the new kernel stack page and fix it up + * remember that the task_struct doubles as the kernel stack for the task + */ + + if (unlikely(p->flags & PF_KTHREAD)) { + memset(swstack, 0, + sizeof(struct switch_stack) + sizeof(struct pt_regs)); + swstack->r1 = usp; + swstack->r2 = arg; + childregs->dccr = 1 << I_DCCR_BITNR; + swstack->return_ip = (unsigned long) ret_from_kernel_thread; + p->thread.ksp = (unsigned long) swstack; + p->thread.usp = 0; + return 0; + } + *childregs = *current_pt_regs(); /* struct copy of pt_regs */ + + childregs->r10 = 0; /* child returns 0 after a fork/clone */ + + /* put the switch stack right below the pt_regs */ + + swstack->r9 = 0; /* parameter to ret_from_sys_call, 0 == dont restart the syscall */ + + /* we want to return into ret_from_sys_call after the _resume */ + + swstack->return_ip = (unsigned long) ret_from_fork; /* Will call ret_from_sys_call */ + + /* fix the user-mode stackpointer */ + + p->thread.usp = usp ?: rdusp(); + + /* and the kernel-mode one */ + + p->thread.ksp = (unsigned long) swstack; + +#ifdef DEBUG + printk("copy_thread: new regs at 0x%p, as shown below:\n", childregs); + show_registers(childregs); +#endif + + return 0; +} + +unsigned long get_wchan(struct task_struct *p) +{ +#if 0 + /* YURGH. TODO. */ + + unsigned long ebp, esp, eip; + unsigned long stack_page; + int count = 0; + if (!p || p == current || p->state == TASK_RUNNING) + return 0; + stack_page = (unsigned long)p; + esp = p->thread.esp; + if (!stack_page || esp < stack_page || esp > 8188+stack_page) + return 0; + /* include/asm-i386/system.h:switch_to() pushes ebp last. */ + ebp = *(unsigned long *) esp; + do { + if (ebp < stack_page || ebp > 8184+stack_page) + return 0; + eip = *(unsigned long *) (ebp+4); + if (!in_sched_functions(eip)) + return eip; + ebp = *(unsigned long *) ebp; + } while (count++ < 16); +#endif + return 0; +} +#undef last_sched +#undef first_sched + +void show_regs(struct pt_regs * regs) +{ + unsigned long usp = rdusp(); + + show_regs_print_info(KERN_DEFAULT); + + printk("IRP: %08lx SRP: %08lx DCCR: %08lx USP: %08lx MOF: %08lx\n", + regs->irp, regs->srp, regs->dccr, usp, regs->mof ); + printk(" r0: %08lx r1: %08lx r2: %08lx r3: %08lx\n", + regs->r0, regs->r1, regs->r2, regs->r3); + printk(" r4: %08lx r5: %08lx r6: %08lx r7: %08lx\n", + regs->r4, regs->r5, regs->r6, regs->r7); + printk(" r8: %08lx r9: %08lx r10: %08lx r11: %08lx\n", + regs->r8, regs->r9, regs->r10, regs->r11); + printk("r12: %08lx r13: %08lx oR10: %08lx\n", + regs->r12, regs->r13, regs->orig_r10); +} + diff --git a/kernel/arch/cris/arch-v10/kernel/ptrace.c b/kernel/arch/cris/arch-v10/kernel/ptrace.c new file mode 100644 index 000000000..bfddfb994 --- /dev/null +++ b/kernel/arch/cris/arch-v10/kernel/ptrace.c @@ -0,0 +1,202 @@ +/* + * Copyright (C) 2000-2003, Axis Communications AB. + */ + +#include <linux/kernel.h> +#include <linux/sched.h> +#include <linux/mm.h> +#include <linux/smp.h> +#include <linux/errno.h> +#include <linux/ptrace.h> +#include <linux/user.h> +#include <linux/signal.h> +#include <linux/security.h> + +#include <asm/uaccess.h> +#include <asm/page.h> +#include <asm/pgtable.h> +#include <asm/processor.h> + +/* + * Determines which bits in DCCR the user has access to. + * 1 = access, 0 = no access. + */ +#define DCCR_MASK 0x0000001f /* XNZVC */ + +/* + * Get contents of register REGNO in task TASK. + */ +inline long get_reg(struct task_struct *task, unsigned int regno) +{ + /* USP is a special case, it's not in the pt_regs struct but + * in the tasks thread struct + */ + + if (regno == PT_USP) + return task->thread.usp; + else if (regno < PT_MAX) + return ((unsigned long *)task_pt_regs(task))[regno]; + else + return 0; +} + +/* + * Write contents of register REGNO in task TASK. + */ +inline int put_reg(struct task_struct *task, unsigned int regno, + unsigned long data) +{ + if (regno == PT_USP) + task->thread.usp = data; + else if (regno < PT_MAX) + ((unsigned long *)task_pt_regs(task))[regno] = data; + else + return -1; + return 0; +} + +/* + * Called by kernel/ptrace.c when detaching. + * + * Make sure the single step bit is not set. + */ +void +ptrace_disable(struct task_struct *child) +{ + /* Todo - pending singlesteps? */ + clear_tsk_thread_flag(child, TIF_SYSCALL_TRACE); +} + +/* + * Note that this implementation of ptrace behaves differently from vanilla + * ptrace. Contrary to what the man page says, in the PTRACE_PEEKTEXT, + * PTRACE_PEEKDATA, and PTRACE_PEEKUSER requests the data variable is not + * ignored. Instead, the data variable is expected to point at a location + * (in user space) where the result of the ptrace call is written (instead of + * being returned). + */ +long arch_ptrace(struct task_struct *child, long request, + unsigned long addr, unsigned long data) +{ + int ret; + unsigned int regno = addr >> 2; + unsigned long __user *datap = (unsigned long __user *)data; + + switch (request) { + /* Read word at location address. */ + case PTRACE_PEEKTEXT: + case PTRACE_PEEKDATA: + ret = generic_ptrace_peekdata(child, addr, data); + break; + + /* Read the word at location address in the USER area. */ + case PTRACE_PEEKUSR: { + unsigned long tmp; + + ret = -EIO; + if ((addr & 3) || regno > PT_MAX) + break; + + tmp = get_reg(child, regno); + ret = put_user(tmp, datap); + break; + } + + /* Write the word at location address. */ + case PTRACE_POKETEXT: + case PTRACE_POKEDATA: + ret = generic_ptrace_pokedata(child, addr, data); + break; + + /* Write the word at location address in the USER area. */ + case PTRACE_POKEUSR: + ret = -EIO; + if ((addr & 3) || regno > PT_MAX) + break; + + if (regno == PT_DCCR) { + /* don't allow the tracing process to change stuff like + * interrupt enable, kernel/user bit, dma enables etc. + */ + data &= DCCR_MASK; + data |= get_reg(child, PT_DCCR) & ~DCCR_MASK; + } + if (put_reg(child, regno, data)) + break; + ret = 0; + break; + + /* Get all GP registers from the child. */ + case PTRACE_GETREGS: { + int i; + unsigned long tmp; + + ret = 0; + for (i = 0; i <= PT_MAX; i++) { + tmp = get_reg(child, i); + + if (put_user(tmp, datap)) { + ret = -EFAULT; + break; + } + + datap++; + } + + break; + } + + /* Set all GP registers in the child. */ + case PTRACE_SETREGS: { + int i; + unsigned long tmp; + + ret = 0; + for (i = 0; i <= PT_MAX; i++) { + if (get_user(tmp, datap)) { + ret = -EFAULT; + break; + } + + if (i == PT_DCCR) { + tmp &= DCCR_MASK; + tmp |= get_reg(child, PT_DCCR) & ~DCCR_MASK; + } + + put_reg(child, i, tmp); + datap++; + } + + break; + } + + default: + ret = ptrace_request(child, request, addr, data); + break; + } + + return ret; +} + +void do_syscall_trace(void) +{ + if (!test_thread_flag(TIF_SYSCALL_TRACE)) + return; + + if (!(current->ptrace & PT_PTRACED)) + return; + + /* the 0x80 provides a way for the tracing parent to distinguish + between a syscall stop and SIGTRAP delivery */ + ptrace_notify(SIGTRAP | ((current->ptrace & PT_TRACESYSGOOD) + ? 0x80 : 0)); + + /* + * This isn't the same as continuing with a signal, but it will do for + * normal use. + */ + if (current->exit_code) { + send_sig(current->exit_code, current, 1); + current->exit_code = 0; + } +} diff --git a/kernel/arch/cris/arch-v10/kernel/setup.c b/kernel/arch/cris/arch-v10/kernel/setup.c new file mode 100644 index 000000000..7ab31f1c7 --- /dev/null +++ b/kernel/arch/cris/arch-v10/kernel/setup.c @@ -0,0 +1,106 @@ +/* + * + * linux/arch/cris/arch-v10/kernel/setup.c + * + * Copyright (C) 1995 Linus Torvalds + * Copyright (c) 2001-2002 Axis Communications AB + */ + +/* + * This file handles the architecture-dependent parts of initialization + */ + +#include <linux/seq_file.h> +#include <linux/proc_fs.h> +#include <linux/delay.h> +#include <linux/param.h> +#include <arch/system.h> + +#ifdef CONFIG_PROC_FS +#define HAS_FPU 0x0001 +#define HAS_MMU 0x0002 +#define HAS_ETHERNET100 0x0004 +#define HAS_TOKENRING 0x0008 +#define HAS_SCSI 0x0010 +#define HAS_ATA 0x0020 +#define HAS_USB 0x0040 +#define HAS_IRQ_BUG 0x0080 +#define HAS_MMU_BUG 0x0100 + +static struct cpu_info { + char *model; + unsigned short cache; + unsigned short flags; +} cpu_info[] = { + /* The first four models will never ever run this code and are + only here for display. */ + { "ETRAX 1", 0, 0 }, + { "ETRAX 2", 0, 0 }, + { "ETRAX 3", 0, HAS_TOKENRING }, + { "ETRAX 4", 0, HAS_TOKENRING | HAS_SCSI }, + { "Unknown", 0, 0 }, + { "Unknown", 0, 0 }, + { "Unknown", 0, 0 }, + { "Simulator", 8, HAS_ETHERNET100 | HAS_SCSI | HAS_ATA }, + { "ETRAX 100", 8, HAS_ETHERNET100 | HAS_SCSI | HAS_ATA | HAS_IRQ_BUG }, + { "ETRAX 100", 8, HAS_ETHERNET100 | HAS_SCSI | HAS_ATA }, + { "ETRAX 100LX", 8, HAS_ETHERNET100 | HAS_SCSI | HAS_ATA | HAS_USB | HAS_MMU | HAS_MMU_BUG }, + { "ETRAX 100LX v2", 8, HAS_ETHERNET100 | HAS_SCSI | HAS_ATA | HAS_USB | HAS_MMU }, + { "Unknown", 0, 0 } /* This entry MUST be the last */ +}; + +int show_cpuinfo(struct seq_file *m, void *v) +{ + unsigned long revision; + struct cpu_info *info; + + /* read the version register in the CPU and print some stuff */ + + revision = rdvr(); + + if (revision >= ARRAY_SIZE(cpu_info)) + info = &cpu_info[ARRAY_SIZE(cpu_info) - 1]; + else + info = &cpu_info[revision]; + + seq_printf(m, + "processor\t: 0\n" + "cpu\t\t: CRIS\n" + "cpu revision\t: %lu\n" + "cpu model\t: %s\n" + "cache size\t: %d kB\n" + "fpu\t\t: %s\n" + "mmu\t\t: %s\n" + "mmu DMA bug\t: %s\n" + "ethernet\t: %s Mbps\n" + "token ring\t: %s\n" + "scsi\t\t: %s\n" + "ata\t\t: %s\n" + "usb\t\t: %s\n" + "bogomips\t: %lu.%02lu\n", + + revision, + info->model, + info->cache, + info->flags & HAS_FPU ? "yes" : "no", + info->flags & HAS_MMU ? "yes" : "no", + info->flags & HAS_MMU_BUG ? "yes" : "no", + info->flags & HAS_ETHERNET100 ? "10/100" : "10", + info->flags & HAS_TOKENRING ? "4/16 Mbps" : "no", + info->flags & HAS_SCSI ? "yes" : "no", + info->flags & HAS_ATA ? "yes" : "no", + info->flags & HAS_USB ? "yes" : "no", + (loops_per_jiffy * HZ + 500) / 500000, + ((loops_per_jiffy * HZ + 500) / 5000) % 100); + + return 0; +} + +#endif /* CONFIG_PROC_FS */ + +void +show_etrax_copyright(void) +{ + printk(KERN_INFO + "Linux/CRIS port on ETRAX 100LX (c) 2001 Axis Communications AB\n"); +} diff --git a/kernel/arch/cris/arch-v10/kernel/shadows.c b/kernel/arch/cris/arch-v10/kernel/shadows.c new file mode 100644 index 000000000..2454a0b02 --- /dev/null +++ b/kernel/arch/cris/arch-v10/kernel/shadows.c @@ -0,0 +1,36 @@ +/* + * Various shadow registers. Defines for these are in include/asm-etrax100/io.h + */ + +/* Shadows for internal Etrax-registers */ + +unsigned long genconfig_shadow; +unsigned long gen_config_ii_shadow; +unsigned long port_g_data_shadow; +unsigned char port_pa_dir_shadow; +unsigned char port_pa_data_shadow; +unsigned char port_pb_i2c_shadow; +unsigned char port_pb_config_shadow; +unsigned char port_pb_dir_shadow; +unsigned char port_pb_data_shadow; +unsigned long r_timer_ctrl_shadow; + +/* Shadows for external I/O port registers. + * These are only usable if there actually IS a latch connected + * to the corresponding external chip-select pin. + * + * A common usage is that CSP0 controls LEDs and CSP4 video chips. + */ + +unsigned long port_cse1_shadow; +unsigned long port_csp0_shadow; +unsigned long port_csp4_shadow; + +/* Corresponding addresses for the ports. + * These are initialized in arch/cris/mm/init.c using ioremap. + */ + +volatile unsigned long *port_cse1_addr; +volatile unsigned long *port_csp0_addr; +volatile unsigned long *port_csp4_addr; + diff --git a/kernel/arch/cris/arch-v10/kernel/signal.c b/kernel/arch/cris/arch-v10/kernel/signal.c new file mode 100644 index 000000000..7122d9773 --- /dev/null +++ b/kernel/arch/cris/arch-v10/kernel/signal.c @@ -0,0 +1,438 @@ +/* + * linux/arch/cris/kernel/signal.c + * + * Based on arch/i386/kernel/signal.c by + * Copyright (C) 1991, 1992 Linus Torvalds + * 1997-11-28 Modified for POSIX.1b signals by Richard Henderson * + * + * Ideas also taken from arch/arm. + * + * Copyright (C) 2000-2007 Axis Communications AB + * + * Authors: Bjorn Wesen (bjornw@axis.com) + * + */ + +#include <linux/sched.h> +#include <linux/mm.h> +#include <linux/smp.h> +#include <linux/kernel.h> +#include <linux/signal.h> +#include <linux/errno.h> +#include <linux/wait.h> +#include <linux/ptrace.h> +#include <linux/unistd.h> +#include <linux/stddef.h> + +#include <asm/processor.h> +#include <asm/ucontext.h> +#include <asm/uaccess.h> +#include <arch/system.h> + +#define DEBUG_SIG 0 + +/* a syscall in Linux/CRIS is a break 13 instruction which is 2 bytes */ +/* manipulate regs so that upon return, it will be re-executed */ + +/* We rely on that pc points to the instruction after "break 13", so the + * library must never do strange things like putting it in a delay slot. + */ +#define RESTART_CRIS_SYS(regs) regs->r10 = regs->orig_r10; regs->irp -= 2; + +void do_signal(int canrestart, struct pt_regs *regs); + +/* + * Do a signal return; undo the signal stack. + */ + +struct sigframe { + struct sigcontext sc; + unsigned long extramask[_NSIG_WORDS-1]; + unsigned char retcode[8]; /* trampoline code */ +}; + +struct rt_sigframe { + struct siginfo *pinfo; + void *puc; + struct siginfo info; + struct ucontext uc; + unsigned char retcode[8]; /* trampoline code */ +}; + + +static int +restore_sigcontext(struct pt_regs *regs, struct sigcontext __user *sc) +{ + unsigned int err = 0; + unsigned long old_usp; + + /* Always make any pending restarted system calls return -EINTR */ + current->restart_block.fn = do_no_restart_syscall; + + /* restore the regs from &sc->regs (same as sc, since regs is first) + * (sc is already checked for VERIFY_READ since the sigframe was + * checked in sys_sigreturn previously) + */ + + if (__copy_from_user(regs, sc, sizeof(struct pt_regs))) + goto badframe; + + /* make sure the U-flag is set so user-mode cannot fool us */ + + regs->dccr |= 1 << 8; + + /* restore the old USP as it was before we stacked the sc etc. + * (we cannot just pop the sigcontext since we aligned the sp and + * stuff after pushing it) + */ + + err |= __get_user(old_usp, &sc->usp); + + wrusp(old_usp); + + /* TODO: the other ports use regs->orig_XX to disable syscall checks + * after this completes, but we don't use that mechanism. maybe we can + * use it now ? + */ + + return err; + +badframe: + return 1; +} + +asmlinkage int sys_sigreturn(void) +{ + struct pt_regs *regs = current_pt_regs(); + struct sigframe __user *frame = (struct sigframe *)rdusp(); + sigset_t set; + + /* + * Since we stacked the signal on a dword boundary, + * then frame should be dword aligned here. If it's + * not, then the user is trying to mess with us. + */ + if (((long)frame) & 3) + goto badframe; + + if (!access_ok(VERIFY_READ, frame, sizeof(*frame))) + goto badframe; + if (__get_user(set.sig[0], &frame->sc.oldmask) + || (_NSIG_WORDS > 1 + && __copy_from_user(&set.sig[1], frame->extramask, + sizeof(frame->extramask)))) + goto badframe; + + set_current_blocked(&set); + + if (restore_sigcontext(regs, &frame->sc)) + goto badframe; + + /* TODO: SIGTRAP when single-stepping as in arm ? */ + + return regs->r10; + +badframe: + force_sig(SIGSEGV, current); + return 0; +} + +asmlinkage int sys_rt_sigreturn(void) +{ + struct pt_regs *regs = current_pt_regs(); + struct rt_sigframe __user *frame = (struct rt_sigframe *)rdusp(); + sigset_t set; + + /* + * Since we stacked the signal on a dword boundary, + * then frame should be dword aligned here. If it's + * not, then the user is trying to mess with us. + */ + if (((long)frame) & 3) + goto badframe; + + if (!access_ok(VERIFY_READ, frame, sizeof(*frame))) + goto badframe; + if (__copy_from_user(&set, &frame->uc.uc_sigmask, sizeof(set))) + goto badframe; + + set_current_blocked(&set); + + if (restore_sigcontext(regs, &frame->uc.uc_mcontext)) + goto badframe; + + if (restore_altstack(&frame->uc.uc_stack)) + goto badframe; + + return regs->r10; + +badframe: + force_sig(SIGSEGV, current); + return 0; +} + +/* + * Set up a signal frame. + */ + +static int setup_sigcontext(struct sigcontext __user *sc, + struct pt_regs *regs, unsigned long mask) +{ + int err = 0; + unsigned long usp = rdusp(); + + /* copy the regs. they are first in sc so we can use sc directly */ + + err |= __copy_to_user(sc, regs, sizeof(struct pt_regs)); + + /* Set the frametype to CRIS_FRAME_NORMAL for the execution of + the signal handler. The frametype will be restored to its previous + value in restore_sigcontext. */ + regs->frametype = CRIS_FRAME_NORMAL; + + /* then some other stuff */ + + err |= __put_user(mask, &sc->oldmask); + + err |= __put_user(usp, &sc->usp); + + return err; +} + +/* Figure out where we want to put the new signal frame + * - usually on the stack. */ + +static inline void __user * +get_sigframe(struct ksignal *ksig, size_t frame_size) +{ + unsigned long sp = sigsp(rdusp(), ksig); + + /* make sure the frame is dword-aligned */ + + sp &= ~3; + + return (void __user*)(sp - frame_size); +} + +/* grab and setup a signal frame. + * + * basically we stack a lot of state info, and arrange for the + * user-mode program to return to the kernel using either a + * trampoline which performs the syscall sigreturn, or a provided + * user-mode trampoline. + */ + +static int setup_frame(struct ksignal *ksig, sigset_t *set, + struct pt_regs *regs) +{ + struct sigframe __user *frame; + unsigned long return_ip; + int err = 0; + + frame = get_sigframe(ksig, sizeof(*frame)); + + if (!access_ok(VERIFY_WRITE, frame, sizeof(*frame))) + return -EFAULT; + + err |= setup_sigcontext(&frame->sc, regs, set->sig[0]); + if (err) + return -EFAULT; + + if (_NSIG_WORDS > 1) { + err |= __copy_to_user(frame->extramask, &set->sig[1], + sizeof(frame->extramask)); + } + if (err) + return -EFAULT; + + /* Set up to return from userspace. If provided, use a stub + already in userspace. */ + if (ksig->ka.sa.sa_flags & SA_RESTORER) { + return_ip = (unsigned long)ksig->ka.sa.sa_restorer; + } else { + /* trampoline - the desired return ip is the retcode itself */ + return_ip = (unsigned long)&frame->retcode; + /* This is movu.w __NR_sigreturn, r9; break 13; */ + err |= __put_user(0x9c5f, (short __user*)(frame->retcode+0)); + err |= __put_user(__NR_sigreturn, (short __user*)(frame->retcode+2)); + err |= __put_user(0xe93d, (short __user*)(frame->retcode+4)); + } + + if (err) + return -EFAULT; + + /* Set up registers for signal handler */ + + regs->irp = (unsigned long) ksig->ka.sa.sa_handler; /* what we enter NOW */ + regs->srp = return_ip; /* what we enter LATER */ + regs->r10 = ksig->sig; /* first argument is signo */ + + /* actually move the usp to reflect the stacked frame */ + + wrusp((unsigned long)frame); + + return 0; +} + +static int setup_rt_frame(struct ksignal *ksig, sigset_t *set, + struct pt_regs *regs) +{ + struct rt_sigframe __user *frame; + unsigned long return_ip; + int err = 0; + + frame = get_sigframe(ksig, sizeof(*frame)); + + if (!access_ok(VERIFY_WRITE, frame, sizeof(*frame))) + return -EFAULT; + + err |= __put_user(&frame->info, &frame->pinfo); + err |= __put_user(&frame->uc, &frame->puc); + err |= copy_siginfo_to_user(&frame->info, &ksig->info); + if (err) + return -EFAULT; + + /* Clear all the bits of the ucontext we don't use. */ + err |= __clear_user(&frame->uc, offsetof(struct ucontext, uc_mcontext)); + + err |= setup_sigcontext(&frame->uc.uc_mcontext, regs, set->sig[0]); + + err |= __copy_to_user(&frame->uc.uc_sigmask, set, sizeof(*set)); + + err |= __save_altstack(&frame->uc.uc_stack, rdusp()); + + if (err) + return -EFAULT; + + /* Set up to return from userspace. If provided, use a stub + already in userspace. */ + if (ksig->ka.sa.sa_flags & SA_RESTORER) { + return_ip = (unsigned long)ksig->ka.sa.sa_restorer; + } else { + /* trampoline - the desired return ip is the retcode itself */ + return_ip = (unsigned long)&frame->retcode; + /* This is movu.w __NR_rt_sigreturn, r9; break 13; */ + err |= __put_user(0x9c5f, (short __user *)(frame->retcode+0)); + err |= __put_user(__NR_rt_sigreturn, + (short __user *)(frame->retcode+2)); + err |= __put_user(0xe93d, (short __user *)(frame->retcode+4)); + } + + if (err) + return -EFAULT; + + /* Set up registers for signal handler */ + + /* What we enter NOW */ + regs->irp = (unsigned long) ksig->ka.sa.sa_handler; + /* What we enter LATER */ + regs->srp = return_ip; + /* First argument is signo */ + regs->r10 = ksig->sig; + /* Second argument is (siginfo_t *) */ + regs->r11 = (unsigned long)&frame->info; + /* Third argument is unused */ + regs->r12 = 0; + + /* Actually move the usp to reflect the stacked frame */ + wrusp((unsigned long)frame); + + return 0; +} + +/* + * OK, we're invoking a handler + */ + +static inline void handle_signal(int canrestart, struct ksignal *ksig, + struct pt_regs *regs) +{ + sigset_t *oldset = sigmask_to_save(); + int ret; + + /* Are we from a system call? */ + if (canrestart) { + /* If so, check system call restarting.. */ + switch (regs->r10) { + case -ERESTART_RESTARTBLOCK: + case -ERESTARTNOHAND: + /* ERESTARTNOHAND means that the syscall should + * only be restarted if there was no handler for + * the signal, and since we only get here if there + * is a handler, we don't restart */ + regs->r10 = -EINTR; + break; + case -ERESTARTSYS: + /* ERESTARTSYS means to restart the syscall if + * there is no handler or the handler was + * registered with SA_RESTART */ + if (!(ksig->ka.sa.sa_flags & SA_RESTART)) { + regs->r10 = -EINTR; + break; + } + /* fallthrough */ + case -ERESTARTNOINTR: + /* ERESTARTNOINTR means that the syscall should + * be called again after the signal handler returns. */ + RESTART_CRIS_SYS(regs); + } + } + + /* Set up the stack frame */ + if (ksig->ka.sa.sa_flags & SA_SIGINFO) + ret = setup_rt_frame(ksig, oldset, regs); + else + ret = setup_frame(ksig, oldset, regs); + + signal_setup_done(ret, ksig, 0); +} + +/* + * Note that 'init' is a special process: it doesn't get signals it doesn't + * want to handle. Thus you cannot kill init even with a SIGKILL even by + * mistake. + * + * Also note that the regs structure given here as an argument, is the latest + * pushed pt_regs. It may or may not be the same as the first pushed registers + * when the initial usermode->kernelmode transition took place. Therefore + * we can use user_mode(regs) to see if we came directly from kernel or user + * mode below. + */ + +void do_signal(int canrestart, struct pt_regs *regs) +{ + struct ksignal ksig; + + /* + * We want the common case to go fast, which + * is why we may in certain cases get here from + * kernel mode. Just return without doing anything + * if so. + */ + if (!user_mode(regs)) + return; + + if (get_signal(&ksig)) { + /* Whee! Actually deliver the signal. */ + handle_signal(canrestart, &ksig, regs); + return; + } + + /* Did we come from a system call? */ + if (canrestart) { + /* Restart the system call - no handlers present */ + if (regs->r10 == -ERESTARTNOHAND || + regs->r10 == -ERESTARTSYS || + regs->r10 == -ERESTARTNOINTR) { + RESTART_CRIS_SYS(regs); + } + if (regs->r10 == -ERESTART_RESTARTBLOCK) { + regs->r9 = __NR_restart_syscall; + regs->irp -= 2; + } + } + + /* if there's no signal to deliver, we just put the saved sigmask + * back */ + restore_saved_sigmask(); +} diff --git a/kernel/arch/cris/arch-v10/kernel/time.c b/kernel/arch/cris/arch-v10/kernel/time.c new file mode 100644 index 000000000..b5eb5cd2f --- /dev/null +++ b/kernel/arch/cris/arch-v10/kernel/time.c @@ -0,0 +1,267 @@ +/* + * linux/arch/cris/arch-v10/kernel/time.c + * + * Copyright (C) 1991, 1992, 1995 Linus Torvalds + * Copyright (C) 1999-2002 Axis Communications AB + * + */ + +#include <linux/timex.h> +#include <linux/time.h> +#include <linux/jiffies.h> +#include <linux/interrupt.h> +#include <linux/swap.h> +#include <linux/sched.h> +#include <linux/init.h> +#include <linux/mm.h> +#include <asm/types.h> +#include <asm/signal.h> +#include <asm/io.h> +#include <asm/delay.h> +#include <asm/irq_regs.h> + +/* define this if you need to use print_timestamp */ +/* it will make jiffies at 96 hz instead of 100 hz though */ +#undef USE_CASCADE_TIMERS + +unsigned long get_ns_in_jiffie(void) +{ + unsigned char timer_count, t1; + unsigned short presc_count; + unsigned long ns; + unsigned long flags; + + local_irq_save(flags); + timer_count = *R_TIMER0_DATA; + presc_count = *R_TIM_PRESC_STATUS; + /* presc_count might be wrapped */ + t1 = *R_TIMER0_DATA; + + if (timer_count != t1){ + /* it wrapped, read prescaler again... */ + presc_count = *R_TIM_PRESC_STATUS; + timer_count = t1; + } + local_irq_restore(flags); + if (presc_count >= PRESCALE_VALUE/2 ){ + presc_count = PRESCALE_VALUE - presc_count + PRESCALE_VALUE/2; + } else { + presc_count = PRESCALE_VALUE - presc_count - PRESCALE_VALUE/2; + } + + ns = ( (TIMER0_DIV - timer_count) * ((1000000000/HZ)/TIMER0_DIV )) + + ( (presc_count) * (1000000000/PRESCALE_FREQ)); + return ns; +} + +static u32 cris_v10_gettimeoffset(void) +{ + u32 count; + + /* The timer interrupt comes from Etrax timer 0. In order to get + * better precision, we check the current value. It might have + * underflowed already though. + */ + count = *R_TIMER0_DATA; + + /* Convert timer value to nsec */ + return (TIMER0_DIV - count) * (NSEC_PER_SEC/HZ)/TIMER0_DIV; +} + +/* Excerpt from the Etrax100 HSDD about the built-in watchdog: + * + * 3.10.4 Watchdog timer + + * When the watchdog timer is started, it generates an NMI if the watchdog + * isn't restarted or stopped within 0.1 s. If it still isn't restarted or + * stopped after an additional 3.3 ms, the watchdog resets the chip. + * The watchdog timer is stopped after reset. The watchdog timer is controlled + * by the R_WATCHDOG register. The R_WATCHDOG register contains an enable bit + * and a 3-bit key value. The effect of writing to the R_WATCHDOG register is + * described in the table below: + * + * Watchdog Value written: + * state: To enable: To key: Operation: + * -------- ---------- ------- ---------- + * stopped 0 X No effect. + * stopped 1 key_val Start watchdog with key = key_val. + * started 0 ~key Stop watchdog + * started 1 ~key Restart watchdog with key = ~key. + * started X new_key_val Change key to new_key_val. + * + * Note: '~' is the bitwise NOT operator. + * + */ + +/* right now, starting the watchdog is the same as resetting it */ +#define start_watchdog reset_watchdog + +#ifdef CONFIG_ETRAX_WATCHDOG +static int watchdog_key = 0; /* arbitrary number */ +#endif + +/* number of pages to consider "out of memory". it is normal that the memory + * is used though, so put this really low. + */ + +#define WATCHDOG_MIN_FREE_PAGES 8 + +void reset_watchdog(void) +{ +#if defined(CONFIG_ETRAX_WATCHDOG) + /* only keep watchdog happy as long as we have memory left! */ + if(nr_free_pages() > WATCHDOG_MIN_FREE_PAGES) { + /* reset the watchdog with the inverse of the old key */ + watchdog_key ^= 0x7; /* invert key, which is 3 bits */ + *R_WATCHDOG = IO_FIELD(R_WATCHDOG, key, watchdog_key) | + IO_STATE(R_WATCHDOG, enable, start); + } +#endif +} + +/* stop the watchdog - we still need the correct key */ + +void stop_watchdog(void) +{ +#ifdef CONFIG_ETRAX_WATCHDOG + watchdog_key ^= 0x7; /* invert key, which is 3 bits */ + *R_WATCHDOG = IO_FIELD(R_WATCHDOG, key, watchdog_key) | + IO_STATE(R_WATCHDOG, enable, stop); +#endif +} + + +extern void cris_do_profile(struct pt_regs *regs); + +/* + * timer_interrupt() needs to keep up the real-time clock, + * as well as call the "xtime_update()" routine every clocktick + */ +static inline irqreturn_t timer_interrupt(int irq, void *dev_id) +{ + struct pt_regs *regs = get_irq_regs(); + /* acknowledge the timer irq */ + +#ifdef USE_CASCADE_TIMERS + *R_TIMER_CTRL = + IO_FIELD( R_TIMER_CTRL, timerdiv1, 0) | + IO_FIELD( R_TIMER_CTRL, timerdiv0, 0) | + IO_STATE( R_TIMER_CTRL, i1, clr) | + IO_STATE( R_TIMER_CTRL, tm1, run) | + IO_STATE( R_TIMER_CTRL, clksel1, cascade0) | + IO_STATE( R_TIMER_CTRL, i0, clr) | + IO_STATE( R_TIMER_CTRL, tm0, run) | + IO_STATE( R_TIMER_CTRL, clksel0, c6250kHz); +#else + *R_TIMER_CTRL = r_timer_ctrl_shadow | IO_STATE(R_TIMER_CTRL, i0, clr); +#endif + + /* reset watchdog otherwise it resets us! */ + reset_watchdog(); + + /* Update statistics. */ + update_process_times(user_mode(regs)); + + /* call the real timer interrupt handler */ + xtime_update(1); + + cris_do_profile(regs); /* Save profiling information */ + return IRQ_HANDLED; +} + +/* timer is IRQF_SHARED so drivers can add stuff to the timer irq chain */ + +static struct irqaction irq2 = { + .handler = timer_interrupt, + .flags = IRQF_SHARED, + .name = "timer", +}; + +void __init time_init(void) +{ + arch_gettimeoffset = cris_v10_gettimeoffset; + + /* probe for the RTC and read it if it exists + * Before the RTC can be probed the loops_per_usec variable needs + * to be initialized to make usleep work. A better value for + * loops_per_usec is calculated by the kernel later once the + * clock has started. + */ + loops_per_usec = 50; + + /* Setup the etrax timers + * Base frequency is 25000 hz, divider 250 -> 100 HZ + * In normal mode, we use timer0, so timer1 is free. In cascade + * mode (which we sometimes use for debugging) both timers are used. + * Remember that linux/timex.h contains #defines that rely on the + * timer settings below (hz and divide factor) !!! + */ + +#ifdef USE_CASCADE_TIMERS + *R_TIMER_CTRL = + IO_FIELD( R_TIMER_CTRL, timerdiv1, 0) | + IO_FIELD( R_TIMER_CTRL, timerdiv0, 0) | + IO_STATE( R_TIMER_CTRL, i1, nop) | + IO_STATE( R_TIMER_CTRL, tm1, stop_ld) | + IO_STATE( R_TIMER_CTRL, clksel1, cascade0) | + IO_STATE( R_TIMER_CTRL, i0, nop) | + IO_STATE( R_TIMER_CTRL, tm0, stop_ld) | + IO_STATE( R_TIMER_CTRL, clksel0, c6250kHz); + + *R_TIMER_CTRL = r_timer_ctrl_shadow = + IO_FIELD( R_TIMER_CTRL, timerdiv1, 0) | + IO_FIELD( R_TIMER_CTRL, timerdiv0, 0) | + IO_STATE( R_TIMER_CTRL, i1, nop) | + IO_STATE( R_TIMER_CTRL, tm1, run) | + IO_STATE( R_TIMER_CTRL, clksel1, cascade0) | + IO_STATE( R_TIMER_CTRL, i0, nop) | + IO_STATE( R_TIMER_CTRL, tm0, run) | + IO_STATE( R_TIMER_CTRL, clksel0, c6250kHz); +#else + *R_TIMER_CTRL = + IO_FIELD(R_TIMER_CTRL, timerdiv1, 192) | + IO_FIELD(R_TIMER_CTRL, timerdiv0, TIMER0_DIV) | + IO_STATE(R_TIMER_CTRL, i1, nop) | + IO_STATE(R_TIMER_CTRL, tm1, stop_ld) | + IO_STATE(R_TIMER_CTRL, clksel1, c19k2Hz) | + IO_STATE(R_TIMER_CTRL, i0, nop) | + IO_STATE(R_TIMER_CTRL, tm0, stop_ld) | + IO_STATE(R_TIMER_CTRL, clksel0, flexible); + + *R_TIMER_CTRL = r_timer_ctrl_shadow = + IO_FIELD(R_TIMER_CTRL, timerdiv1, 192) | + IO_FIELD(R_TIMER_CTRL, timerdiv0, TIMER0_DIV) | + IO_STATE(R_TIMER_CTRL, i1, nop) | + IO_STATE(R_TIMER_CTRL, tm1, run) | + IO_STATE(R_TIMER_CTRL, clksel1, c19k2Hz) | + IO_STATE(R_TIMER_CTRL, i0, nop) | + IO_STATE(R_TIMER_CTRL, tm0, run) | + IO_STATE(R_TIMER_CTRL, clksel0, flexible); + + *R_TIMER_PRESCALE = PRESCALE_VALUE; +#endif + + /* unmask the timer irq */ + *R_IRQ_MASK0_SET = IO_STATE(R_IRQ_MASK0_SET, timer0, set); + + /* now actually register the irq handler that calls timer_interrupt() */ + setup_irq(2, &irq2); /* irq 2 is the timer0 irq in etrax */ + + /* enable watchdog if we should use one */ +#if defined(CONFIG_ETRAX_WATCHDOG) + printk("Enabling watchdog...\n"); + start_watchdog(); + + /* If we use the hardware watchdog, we want to trap it as an NMI + and dump registers before it resets us. For this to happen, we + must set the "m" NMI enable flag (which once set, is unset only + when an NMI is taken). + + The same goes for the external NMI, but that doesn't have any + driver or infrastructure support yet. */ + asm ("setf m"); + + *R_IRQ_MASK0_SET = IO_STATE(R_IRQ_MASK0_SET, watchdog_nmi, set); + *R_VECT_MASK_SET = IO_STATE(R_VECT_MASK_SET, nmi, set); +#endif +} diff --git a/kernel/arch/cris/arch-v10/kernel/traps.c b/kernel/arch/cris/arch-v10/kernel/traps.c new file mode 100644 index 000000000..7001beda7 --- /dev/null +++ b/kernel/arch/cris/arch-v10/kernel/traps.c @@ -0,0 +1,131 @@ +/* + * Helper functions for trap handlers + * + * Copyright (C) 2000-2007, Axis Communications AB. + * + * Authors: Bjorn Wesen + * Hans-Peter Nilsson + * + */ + +#include <linux/ptrace.h> +#include <asm/uaccess.h> +#include <arch/sv_addr_ag.h> +#include <arch/system.h> + +void +show_registers(struct pt_regs *regs) +{ + /* + * It's possible to use either the USP register or current->thread.usp. + * USP might not correspond to the current process for all cases this + * function is called, and current->thread.usp isn't up to date for the + * current process. Experience shows that using USP is the way to go. + */ + unsigned long usp = rdusp(); + + printk("IRP: %08lx SRP: %08lx DCCR: %08lx USP: %08lx MOF: %08lx\n", + regs->irp, regs->srp, regs->dccr, usp, regs->mof); + + printk(" r0: %08lx r1: %08lx r2: %08lx r3: %08lx\n", + regs->r0, regs->r1, regs->r2, regs->r3); + + printk(" r4: %08lx r5: %08lx r6: %08lx r7: %08lx\n", + regs->r4, regs->r5, regs->r6, regs->r7); + + printk(" r8: %08lx r9: %08lx r10: %08lx r11: %08lx\n", + regs->r8, regs->r9, regs->r10, regs->r11); + + printk("r12: %08lx r13: %08lx oR10: %08lx sp: %08lx\n", + regs->r12, regs->r13, regs->orig_r10, (long unsigned)regs); + + printk("R_MMU_CAUSE: %08lx\n", (unsigned long)*R_MMU_CAUSE); + + printk("Process %s (pid: %d, stackpage=%08lx)\n", + current->comm, current->pid, (unsigned long)current); + + /* + * When in-kernel, we also print out the stack and code at the + * time of the fault.. + */ + if (!user_mode(regs)) { + int i; + + show_stack(NULL, (unsigned long *)usp); + + /* + * If the previous stack-dump wasn't a kernel one, dump the + * kernel stack now. + */ + if (usp != 0) + show_stack(NULL, NULL); + + printk("\nCode: "); + + if (regs->irp < PAGE_OFFSET) + goto bad_value; + + /* + * Quite often the value at regs->irp doesn't point to the + * interesting instruction, which often is the previous + * instruction. So dump at an offset large enough that the + * instruction decoding should be in sync at the interesting + * point, but small enough to fit on a row. The regs->irp + * location is pointed out in a ksymoops-friendly way by + * wrapping the byte for that address in parenthesises. + */ + for (i = -12; i < 12; i++) { + unsigned char c; + + if (__get_user(c, &((unsigned char *)regs->irp)[i])) { +bad_value: + printk(" Bad IP value."); + break; + } + + if (i == 0) + printk("(%02x) ", c); + else + printk("%02x ", c); + } + printk("\n"); + } +} + +void +arch_enable_nmi(void) +{ + asm volatile ("setf m"); +} + +extern void (*nmi_handler)(struct pt_regs *); +void handle_nmi(struct pt_regs *regs) +{ + if (nmi_handler) + nmi_handler(regs); + + /* Wait until nmi is no longer active. (We enable NMI immediately after + returning from this function, and we don't want it happening while + exiting from the NMI interrupt handler.) */ + while (*R_IRQ_MASK0_RD & IO_STATE(R_IRQ_MASK0_RD, nmi_pin, active)) + ; +} + +#ifdef CONFIG_DEBUG_BUGVERBOSE +void +handle_BUG(struct pt_regs *regs) +{ + struct bug_frame f; + unsigned char c; + unsigned long irp = regs->irp; + + if (__copy_from_user(&f, (const void __user *)(irp - 8), sizeof f)) + return; + if (f.prefix != BUG_PREFIX || f.magic != BUG_MAGIC) + return; + if (__get_user(c, f.filename)) + f.filename = "<bad filename>"; + + printk("kernel BUG at %s:%d!\n", f.filename, f.line); +} +#endif diff --git a/kernel/arch/cris/arch-v10/lib/Makefile b/kernel/arch/cris/arch-v10/lib/Makefile new file mode 100644 index 000000000..725153edb --- /dev/null +++ b/kernel/arch/cris/arch-v10/lib/Makefile @@ -0,0 +1,6 @@ +# +# Makefile for Etrax-specific library files.. +# + +lib-y = checksum.o checksumcopy.o string.o usercopy.o memset.o csumcpfruser.o + diff --git a/kernel/arch/cris/arch-v10/lib/checksum.S b/kernel/arch/cris/arch-v10/lib/checksum.S new file mode 100644 index 000000000..7d552f4bd --- /dev/null +++ b/kernel/arch/cris/arch-v10/lib/checksum.S @@ -0,0 +1,118 @@ +/* + * A fast checksum routine using movem + * Copyright (c) 1998-2001 Axis Communications AB + * + * csum_partial(const unsigned char * buff, int len, unsigned int sum) + */ + + .globl csum_partial +csum_partial: + + ;; r10 - src + ;; r11 - length + ;; r12 - checksum + + ;; check for breakeven length between movem and normal word looping versions + ;; we also do _NOT_ want to compute a checksum over more than the + ;; actual length when length < 40 + + cmpu.w 80,$r11 + blo _word_loop + nop + + ;; need to save the registers we use below in the movem loop + ;; this overhead is why we have a check above for breakeven length + ;; only r0 - r8 have to be saved, the other ones are clobber-able + ;; according to the ABI + + subq 9*4,$sp + movem $r8,[$sp] + + ;; do a movem checksum + + subq 10*4,$r11 ; update length for the first loop + +_mloop: movem [$r10+],$r9 ; read 10 longwords + + ;; perform dword checksumming on the 10 longwords + + add.d $r0,$r12 + ax + add.d $r1,$r12 + ax + add.d $r2,$r12 + ax + add.d $r3,$r12 + ax + add.d $r4,$r12 + ax + add.d $r5,$r12 + ax + add.d $r6,$r12 + ax + add.d $r7,$r12 + ax + add.d $r8,$r12 + ax + add.d $r9,$r12 + + ;; fold the carry into the checksum, to avoid having to loop the carry + ;; back into the top + + ax + addq 0,$r12 + + subq 10*4,$r11 + bge _mloop + nop + + addq 10*4,$r11 ; compensate for last loop underflowing length + + movem [$sp+],$r8 ; restore regs + +_word_loop: + ;; only fold if there is anything to fold. + + cmpq 0,$r12 + beq _no_fold + + ;; fold 32-bit checksum into a 16-bit checksum, to avoid carries below. + ;; r9 and r13 can be used as temporaries. + + moveq -1,$r9 ; put 0xffff in r9, faster than move.d 0xffff,r9 + lsrq 16,$r9 + + move.d $r12,$r13 + lsrq 16,$r13 ; r13 = checksum >> 16 + and.d $r9,$r12 ; checksum = checksum & 0xffff + add.d $r13,$r12 ; checksum += r13 + +_no_fold: + cmpq 2,$r11 + blt _no_words + nop + + ;; checksum the rest of the words + + subq 2,$r11 + +_wloop: subq 2,$r11 + bge _wloop + addu.w [$r10+],$r12 + + addq 2,$r11 + +_no_words: + ;; see if we have one odd byte more + cmpq 1,$r11 + beq _do_byte + nop + ret + move.d $r12, $r10 + +_do_byte: + ;; copy and checksum the last byte + addu.b [$r10],$r12 + ret + move.d $r12, $r10 + diff --git a/kernel/arch/cris/arch-v10/lib/checksumcopy.S b/kernel/arch/cris/arch-v10/lib/checksumcopy.S new file mode 100644 index 000000000..540db8a5f --- /dev/null +++ b/kernel/arch/cris/arch-v10/lib/checksumcopy.S @@ -0,0 +1,126 @@ +/* + * A fast checksum+copy routine using movem + * Copyright (c) 1998, 2001 Axis Communications AB + * + * Authors: Bjorn Wesen + * + * csum_partial_copy_nocheck(const char *src, char *dst, + * int len, unsigned int sum) + */ + + .globl csum_partial_copy_nocheck +csum_partial_copy_nocheck: + + ;; r10 - src + ;; r11 - dst + ;; r12 - length + ;; r13 - checksum + + ;; check for breakeven length between movem and normal word looping versions + ;; we also do _NOT_ want to compute a checksum over more than the + ;; actual length when length < 40 + + cmpu.w 80, $r12 + blo _word_loop + nop + + ;; need to save the registers we use below in the movem loop + ;; this overhead is why we have a check above for breakeven length + ;; only r0 - r8 have to be saved, the other ones are clobber-able + ;; according to the ABI + + subq 9*4, $sp + movem $r8, [$sp] + + ;; do a movem copy and checksum + + subq 10*4, $r12 ; update length for the first loop + +_mloop: movem [$r10+],$r9 ; read 10 longwords +1: ;; A failing userspace access will have this as PC. + movem $r9,[$r11+] ; write 10 longwords + + ;; perform dword checksumming on the 10 longwords + + add.d $r0,$r13 + ax + add.d $r1,$r13 + ax + add.d $r2,$r13 + ax + add.d $r3,$r13 + ax + add.d $r4,$r13 + ax + add.d $r5,$r13 + ax + add.d $r6,$r13 + ax + add.d $r7,$r13 + ax + add.d $r8,$r13 + ax + add.d $r9,$r13 + + ;; fold the carry into the checksum, to avoid having to loop the carry + ;; back into the top + + ax + addq 0,$r13 + + subq 10*4,$r12 + bge _mloop + nop + + addq 10*4,$r12 ; compensate for last loop underflowing length + + movem [$sp+],$r8 ; restore regs + +_word_loop: + ;; only fold if there is anything to fold. + + cmpq 0,$r13 + beq _no_fold + + ;; fold 32-bit checksum into a 16-bit checksum, to avoid carries below + ;; r9 can be used as temporary. + + move.d $r13,$r9 + lsrq 16,$r9 ; r0 = checksum >> 16 + and.d 0xffff,$r13 ; checksum = checksum & 0xffff + add.d $r9,$r13 ; checksum += r0 + +_no_fold: + cmpq 2,$r12 + blt _no_words + nop + + ;; copy and checksum the rest of the words + + subq 2,$r12 + +_wloop: move.w [$r10+],$r9 +2: ;; A failing userspace access will have this as PC. + addu.w $r9,$r13 + subq 2,$r12 + bge _wloop + move.w $r9,[$r11+] + + addq 2,$r12 + +_no_words: + ;; see if we have one odd byte more + cmpq 1,$r12 + beq _do_byte + nop + ret + move.d $r13, $r10 + +_do_byte: + ;; copy and checksum the last byte + move.b [$r10],$r9 +3: ;; A failing userspace access will have this as PC. + addu.b $r9,$r13 + move.b $r9,[$r11] + ret + move.d $r13, $r10 diff --git a/kernel/arch/cris/arch-v10/lib/csumcpfruser.S b/kernel/arch/cris/arch-v10/lib/csumcpfruser.S new file mode 100644 index 000000000..5f41ccd62 --- /dev/null +++ b/kernel/arch/cris/arch-v10/lib/csumcpfruser.S @@ -0,0 +1,64 @@ +/* + * Add-on to transform csum_partial_copy_nocheck in checksumcopy.S into + * csum_partial_copy_from_user by adding exception records. + * + * Copyright (C) 2001 Axis Communications AB. + * + * Author: Hans-Peter Nilsson. + */ + +#include <asm/errno.h> + +/* Same function body, but a different name. If we just added exception + records to _csum_partial_copy_nocheck and made it generic, we wouldn't + know a user fault from a kernel fault and we would have overhead in + each kernel caller for the error-pointer argument. + + unsigned int csum_partial_copy_from_user + (const char *src, char *dst, int len, unsigned int sum, int *errptr); + + Note that the errptr argument is only set if we encounter an error. + It is conveniently located on the stack, so the normal function body + does not have to handle it. */ + +#define csum_partial_copy_nocheck csum_partial_copy_from_user + +/* There are local labels numbered 1, 2 and 3 present to mark the + different from-user accesses. */ +#include "checksumcopy.S" + + .section .fixup,"ax" + +;; Here from the movem loop; restore stack. +4: + movem [$sp+],$r8 +;; r12 is already decremented. Add back chunk_size-2. + addq 40-2,$r12 + +;; Here from the word loop; r12 is off by 2; add it back. +5: + addq 2,$r12 + +;; Here from a failing single byte. +6: + +;; Signal in *errptr that we had a failing access. + moveq -EFAULT,$r9 + move.d $r9,[[$sp]] + +;; Clear the rest of the destination area using memset. Preserve the +;; checksum for the readable bytes. + push $srp + push $r13 + move.d $r11,$r10 + clear.d $r11 + jsr memset + pop $r10 + jump [$sp+] + + .previous + .section __ex_table,"a" + .dword 1b,4b + .dword 2b,5b + .dword 3b,6b + .previous diff --git a/kernel/arch/cris/arch-v10/lib/dmacopy.c b/kernel/arch/cris/arch-v10/lib/dmacopy.c new file mode 100644 index 000000000..49f5b8ca5 --- /dev/null +++ b/kernel/arch/cris/arch-v10/lib/dmacopy.c @@ -0,0 +1,42 @@ +/* + * memcpy for large blocks, using memory-memory DMA channels 6 and 7 in Etrax + */ + +#include <asm/svinto.h> +#include <asm/io.h> + +#define D(x) + +void *dma_memcpy(void *pdst, + const void *psrc, + unsigned int pn) +{ + static etrax_dma_descr indma, outdma; + + D(printk(KERN_DEBUG "dma_memcpy %d bytes... ", pn)); + +#if 0 + *R_GEN_CONFIG = genconfig_shadow = + (genconfig_shadow & ~0x3c0000) | + IO_STATE(R_GEN_CONFIG, dma6, intdma7) | + IO_STATE(R_GEN_CONFIG, dma7, intdma6); +#endif + indma.sw_len = outdma.sw_len = pn; + indma.ctrl = d_eol | d_eop; + outdma.ctrl = d_eol; + indma.buf = psrc; + outdma.buf = pdst; + + *R_DMA_CH6_FIRST = &indma; + *R_DMA_CH7_FIRST = &outdma; + *R_DMA_CH6_CMD = IO_STATE(R_DMA_CH6_CMD, cmd, start); + *R_DMA_CH7_CMD = IO_STATE(R_DMA_CH7_CMD, cmd, start); + + while (*R_DMA_CH7_CMD == 1) + /* wait for completion */; + + D(printk(KERN_DEBUG "done\n")); +} + + + diff --git a/kernel/arch/cris/arch-v10/lib/dram_init.S b/kernel/arch/cris/arch-v10/lib/dram_init.S new file mode 100644 index 000000000..e541d3d8f --- /dev/null +++ b/kernel/arch/cris/arch-v10/lib/dram_init.S @@ -0,0 +1,146 @@ +/* + * DRAM/SDRAM initialization - alter with care + * This file is intended to be included from other assembler files + * + * Note: This file may not modify r9 because r9 is used to carry + * information from the decompresser to the kernel + * + * Copyright (C) 2000-2012 Axis Communications AB + * + */ + +/* Just to be certain the config file is included, we include it here + * explicitly instead of depending on it being included in the file that + * uses this code. + */ + + + ;; WARNING! The registers r8 and r9 are used as parameters carrying + ;; information from the decompressor (if the kernel was compressed). + ;; They should not be used in the code below. + + move.d CONFIG_ETRAX_DEF_R_WAITSTATES, $r0 + move.d $r0, [R_WAITSTATES] + + move.d CONFIG_ETRAX_DEF_R_BUS_CONFIG, $r0 + move.d $r0, [R_BUS_CONFIG] + +#ifndef CONFIG_ETRAX_SDRAM + move.d CONFIG_ETRAX_DEF_R_DRAM_CONFIG, $r0 + move.d $r0, [R_DRAM_CONFIG] + + move.d CONFIG_ETRAX_DEF_R_DRAM_TIMING, $r0 + move.d $r0, [R_DRAM_TIMING] +#else + ;; Samsung SDRAMs seem to require to be initialized twice to work properly. + moveq 2, $r6 +_sdram_init: + + ; Refer to ETRAX 100LX Designers Reference for a description of SDRAM initialization + + ; Bank configuration + move.d CONFIG_ETRAX_DEF_R_SDRAM_CONFIG, $r0 + move.d $r0, [R_SDRAM_CONFIG] + + ; Calculate value of mrs_data + ; CAS latency = 2 && bus_width = 32 => 0x40 + ; CAS latency = 3 && bus_width = 32 => 0x60 + ; CAS latency = 2 && bus_width = 16 => 0x20 + ; CAS latency = 3 && bus_width = 16 => 0x30 + + ; Check if value is already supplied in kernel config + move.d CONFIG_ETRAX_DEF_R_SDRAM_TIMING, $r2 + and.d 0x00ff0000, $r2 + bne _set_timing + lsrq 16, $r2 + + move.d 0x40, $r2 ; Assume 32 bits and CAS latency = 2 + move.d CONFIG_ETRAX_DEF_R_SDRAM_TIMING, $r1 + move.d $r1, $r3 + and.d 0x03, $r1 ; Get CAS latency + and.d 0x1000, $r3 ; 50 or 100 MHz? + beq _speed_50 + nop +_speed_100: + cmp.d 0x00, $r1 ; CAS latency = 2? + beq _bw_check + nop + or.d 0x20, $r2 ; CAS latency = 3 + ba _bw_check + nop +_speed_50: + cmp.d 0x01, $r1 ; CAS latency = 2? + beq _bw_check + nop + or.d 0x20, $r2 ; CAS latency = 3 +_bw_check: + move.d CONFIG_ETRAX_DEF_R_SDRAM_CONFIG, $r1 + and.d 0x800000, $r1 ; DRAM width is bit 23 + bne _set_timing + nop + lsrq 1, $r2 ; 16 bits. Shift down value. + + ; Set timing parameters. Starts master clock +_set_timing: + move.d CONFIG_ETRAX_DEF_R_SDRAM_TIMING, $r1 + and.d 0x8000f9ff, $r1 ; Make sure mrs data and command is 0 + or.d 0x80000000, $r1 ; Make sure sdram enable bit is set + move.d $r1, $r5 + or.d 0x0000c000, $r1 ; ref = disable + lslq 16, $r2 ; mrs data starts at bit 16 + or.d $r2, $r1 + move.d $r1, [R_SDRAM_TIMING] + + ; Wait 200us + move.d 10000, $r2 +1: bne 1b + subq 1, $r2 + + ; Issue initialization command sequence + move.d _sdram_commands_start, $r2 + and.d 0x000fffff, $r2 ; Make sure commands are read from flash + move.d _sdram_commands_end, $r3 + and.d 0x000fffff, $r3 +1: clear.d $r4 + move.b [$r2+], $r4 + lslq 9, $r4 ; Command starts at bit 9 + or.d $r1, $r4 + move.d $r4, [R_SDRAM_TIMING] + nop ; Wait five nop cycles between each command + nop + nop + nop + nop + cmp.d $r2, $r3 + bne 1b + nop + move.d $r5, [R_SDRAM_TIMING] + subq 1, $r6 + bne _sdram_init + nop + ba _sdram_commands_end + nop + +_sdram_commands_start: + .byte 3 ; Precharge + .byte 0 ; nop + .byte 2 ; refresh + .byte 0 ; nop + .byte 2 ; refresh + .byte 0 ; nop + .byte 2 ; refresh + .byte 0 ; nop + .byte 2 ; refresh + .byte 0 ; nop + .byte 2 ; refresh + .byte 0 ; nop + .byte 2 ; refresh + .byte 0 ; nop + .byte 2 ; refresh + .byte 0 ; nop + .byte 2 ; refresh + .byte 0 ; nop + .byte 1 ; mrs + .byte 0 ; nop +_sdram_commands_end: +#endif diff --git a/kernel/arch/cris/arch-v10/lib/hw_settings.S b/kernel/arch/cris/arch-v10/lib/hw_settings.S new file mode 100644 index 000000000..c09f19f47 --- /dev/null +++ b/kernel/arch/cris/arch-v10/lib/hw_settings.S @@ -0,0 +1,60 @@ +/* + * This table is used by some tools to extract hardware parameters. + * The table should be included in the kernel and the decompressor. + * Don't forget to update the tools if you change this table. + * + * Copyright (C) 2001 Axis Communications AB + * + * Authors: Mikael Starvik (starvik@axis.com) + */ + +#define PA_SET_VALUE ((CONFIG_ETRAX_DEF_R_PORT_PA_DIR << 8) | \ + (CONFIG_ETRAX_DEF_R_PORT_PA_DATA)) +#define PB_SET_VALUE ((CONFIG_ETRAX_DEF_R_PORT_PB_CONFIG << 16) | \ + (CONFIG_ETRAX_DEF_R_PORT_PB_DIR << 8) | \ + (CONFIG_ETRAX_DEF_R_PORT_PB_DATA)) + + .ascii "HW_PARAM_MAGIC" ; Magic number + .dword 0xc0004000 ; Kernel start address + + ; Debug port +#ifdef CONFIG_ETRAX_DEBUG_PORT0 + .dword 0 +#elif defined(CONFIG_ETRAX_DEBUG_PORT1) + .dword 1 +#elif defined(CONFIG_ETRAX_DEBUG_PORT2) + .dword 2 +#elif defined(CONFIG_ETRAX_DEBUG_PORT3) + .dword 3 +#else + .dword 4 ; No debug +#endif + + ; SDRAM or EDO DRAM? +#ifdef CONFIG_ETRAX_SDRAM + .dword 1 +#else + .dword 0 +#endif + + ; Register values + .dword R_WAITSTATES + .dword CONFIG_ETRAX_DEF_R_WAITSTATES + .dword R_BUS_CONFIG + .dword CONFIG_ETRAX_DEF_R_BUS_CONFIG +#ifdef CONFIG_ETRAX_SDRAM + .dword R_SDRAM_CONFIG + .dword CONFIG_ETRAX_DEF_R_SDRAM_CONFIG + .dword R_SDRAM_TIMING + .dword CONFIG_ETRAX_DEF_R_SDRAM_TIMING +#else + .dword R_DRAM_CONFIG + .dword CONFIG_ETRAX_DEF_R_DRAM_CONFIG + .dword R_DRAM_TIMING + .dword CONFIG_ETRAX_DEF_R_DRAM_TIMING +#endif + .dword R_PORT_PA_SET + .dword PA_SET_VALUE + .dword R_PORT_PB_SET + .dword PB_SET_VALUE + .dword 0 ; No more register values diff --git a/kernel/arch/cris/arch-v10/lib/memset.c b/kernel/arch/cris/arch-v10/lib/memset.c new file mode 100644 index 000000000..c94ea9b3e --- /dev/null +++ b/kernel/arch/cris/arch-v10/lib/memset.c @@ -0,0 +1,259 @@ +/* A memset for CRIS. + Copyright (C) 1999-2005 Axis Communications. + All rights reserved. + + Redistribution and use in source and binary forms, with or without + modification, are permitted provided that the following conditions + are met: + + 1. Redistributions of source code must retain the above copyright + notice, this list of conditions and the following disclaimer. + + 2. Neither the name of Axis Communications nor the names of its + contributors may be used to endorse or promote products derived + from this software without specific prior written permission. + + THIS SOFTWARE IS PROVIDED BY AXIS COMMUNICATIONS AND ITS CONTRIBUTORS + ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR + A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL AXIS + COMMUNICATIONS OR ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, + INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR + SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, + STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING + IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE + POSSIBILITY OF SUCH DAMAGE. */ + +/* FIXME: This file should really only be used for reference, as the + result is somewhat depending on gcc generating what we expect rather + than what we describe. An assembly file should be used instead. */ + +/* Note the multiple occurrence of the expression "12*4", including the + asm. It is hard to get it into the asm in a good way. Thus better to + expose the problem everywhere: no macro. */ + +/* Assuming one cycle per dword written or read (ok, not really true; the + world is not ideal), and one cycle per instruction, then 43+3*(n/48-1) + <= 24+24*(n/48-1) so n >= 45.7; n >= 0.9; we win on the first full + 48-byte block to set. */ + +#define MEMSET_BY_BLOCK_THRESHOLD (1 * 48) + +/* No name ambiguities in this file. */ +__asm__ (".syntax no_register_prefix"); + +void *memset(void *pdst, int c, unsigned int plen) +{ + /* Now we want the parameters in special registers. Make sure the + compiler does something usable with this. */ + + register char *return_dst __asm__ ("r10") = pdst; + register int n __asm__ ("r12") = plen; + register int lc __asm__ ("r11") = c; + + /* Most apps use memset sanely. Memsetting about 3..4 bytes or less get + penalized here compared to the generic implementation. */ + + /* This is fragile performancewise at best. Check with newer GCC + releases, if they compile cascaded "x |= x << 8" to sane code. */ + __asm__("movu.b %0,r13 \n\ + lslq 8,r13 \n\ + move.b %0,r13 \n\ + move.d r13,%0 \n\ + lslq 16,r13 \n\ + or.d r13,%0" + : "=r" (lc) /* Inputs. */ + : "0" (lc) /* Outputs. */ + : "r13"); /* Trash. */ + + { + register char *dst __asm__ ("r13") = pdst; + + if (((unsigned long) pdst & 3) != 0 + /* Oops! n = 0 must be a valid call, regardless of alignment. */ + && n >= 3) + { + if ((unsigned long) dst & 1) + { + *dst = (char) lc; + n--; + dst++; + } + + if ((unsigned long) dst & 2) + { + *(short *) dst = lc; + n -= 2; + dst += 2; + } + } + + /* Decide which setting method to use. */ + if (n >= MEMSET_BY_BLOCK_THRESHOLD) + { + /* It is not optimal to tell the compiler about clobbering any + registers; that will move the saving/restoring of those registers + to the function prologue/epilogue, and make non-block sizes + suboptimal. */ + __asm__ volatile + ("\ + ;; GCC does promise correct register allocations, but let's \n\ + ;; make sure it keeps its promises. \n\ + .ifnc %0-%1-%4,$r13-$r12-$r11 \n\ + .error \"GCC reg alloc bug: %0-%1-%4 != $r13-$r12-$r11\" \n\ + .endif \n\ + \n\ + ;; Save the registers we'll clobber in the movem process \n\ + ;; on the stack. Don't mention them to gcc, it will only be \n\ + ;; upset. \n\ + subq 11*4,sp \n\ + movem r10,[sp] \n\ + \n\ + move.d r11,r0 \n\ + move.d r11,r1 \n\ + move.d r11,r2 \n\ + move.d r11,r3 \n\ + move.d r11,r4 \n\ + move.d r11,r5 \n\ + move.d r11,r6 \n\ + move.d r11,r7 \n\ + move.d r11,r8 \n\ + move.d r11,r9 \n\ + move.d r11,r10 \n\ + \n\ + ;; Now we've got this: \n\ + ;; r13 - dst \n\ + ;; r12 - n \n\ + \n\ + ;; Update n for the first loop \n\ + subq 12*4,r12 \n\ +0: \n\ +" +#ifdef __arch_common_v10_v32 + /* Cater to branch offset difference between v32 and v10. We + assume the branch below has an 8-bit offset. */ +" setf\n" +#endif +" subq 12*4,r12 \n\ + bge 0b \n\ + movem r11,[r13+] \n\ + \n\ + ;; Compensate for last loop underflowing n. \n\ + addq 12*4,r12 \n\ + \n\ + ;; Restore registers from stack. \n\ + movem [sp+],r10" + + /* Outputs. */ + : "=r" (dst), "=r" (n) + + /* Inputs. */ + : "0" (dst), "1" (n), "r" (lc)); + } + + /* An ad-hoc unroll, used for 4*12-1..16 bytes. */ + while (n >= 16) + { + *(long *) dst = lc; dst += 4; + *(long *) dst = lc; dst += 4; + *(long *) dst = lc; dst += 4; + *(long *) dst = lc; dst += 4; + n -= 16; + } + + switch (n) + { + case 0: + break; + + case 1: + *dst = (char) lc; + break; + + case 2: + *(short *) dst = (short) lc; + break; + + case 3: + *(short *) dst = (short) lc; dst += 2; + *dst = (char) lc; + break; + + case 4: + *(long *) dst = lc; + break; + + case 5: + *(long *) dst = lc; dst += 4; + *dst = (char) lc; + break; + + case 6: + *(long *) dst = lc; dst += 4; + *(short *) dst = (short) lc; + break; + + case 7: + *(long *) dst = lc; dst += 4; + *(short *) dst = (short) lc; dst += 2; + *dst = (char) lc; + break; + + case 8: + *(long *) dst = lc; dst += 4; + *(long *) dst = lc; + break; + + case 9: + *(long *) dst = lc; dst += 4; + *(long *) dst = lc; dst += 4; + *dst = (char) lc; + break; + + case 10: + *(long *) dst = lc; dst += 4; + *(long *) dst = lc; dst += 4; + *(short *) dst = (short) lc; + break; + + case 11: + *(long *) dst = lc; dst += 4; + *(long *) dst = lc; dst += 4; + *(short *) dst = (short) lc; dst += 2; + *dst = (char) lc; + break; + + case 12: + *(long *) dst = lc; dst += 4; + *(long *) dst = lc; dst += 4; + *(long *) dst = lc; + break; + + case 13: + *(long *) dst = lc; dst += 4; + *(long *) dst = lc; dst += 4; + *(long *) dst = lc; dst += 4; + *dst = (char) lc; + break; + + case 14: + *(long *) dst = lc; dst += 4; + *(long *) dst = lc; dst += 4; + *(long *) dst = lc; dst += 4; + *(short *) dst = (short) lc; + break; + + case 15: + *(long *) dst = lc; dst += 4; + *(long *) dst = lc; dst += 4; + *(long *) dst = lc; dst += 4; + *(short *) dst = (short) lc; dst += 2; + *dst = (char) lc; + break; + } + } + + return return_dst; +} diff --git a/kernel/arch/cris/arch-v10/lib/old_checksum.c b/kernel/arch/cris/arch-v10/lib/old_checksum.c new file mode 100644 index 000000000..8f79163f1 --- /dev/null +++ b/kernel/arch/cris/arch-v10/lib/old_checksum.c @@ -0,0 +1,86 @@ +/* + * INET An implementation of the TCP/IP protocol suite for the LINUX + * operating system. INET is implemented using the BSD Socket + * interface as the means of communication with the user level. + * + * IP/TCP/UDP checksumming routines + * + * Authors: Jorge Cwik, <jorge@laser.satlink.net> + * Arnt Gulbrandsen, <agulbra@nvg.unit.no> + * Tom May, <ftom@netcom.com> + * Lots of code moved from tcp.c and ip.c; see those files + * for more names. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ + +#include <net/checksum.h> +#include <net/module.h> + +#undef PROFILE_CHECKSUM + +#ifdef PROFILE_CHECKSUM +/* these are just for profiling the checksum code with an oscillioscope.. uh */ +#if 0 +#define BITOFF *((unsigned char *)0xb0000030) = 0xff +#define BITON *((unsigned char *)0xb0000030) = 0x0 +#endif +#include <asm/io.h> +#define CBITON LED_ACTIVE_SET(1) +#define CBITOFF LED_ACTIVE_SET(0) +#define BITOFF +#define BITON +#else +#define BITOFF +#define BITON +#define CBITOFF +#define CBITON +#endif + +/* + * computes a partial checksum, e.g. for TCP/UDP fragments + */ + +#include <asm/delay.h> + +__wsum csum_partial(const void *p, int len, __wsum __sum) +{ + u32 sum = (__force u32)__sum; + const u16 *buff = p; + /* + * Experiments with ethernet and slip connections show that buff + * is aligned on either a 2-byte or 4-byte boundary. + */ + const void *endMarker = p + len; + const void *marker = endMarker - (len % 16); +#if 0 + if((int)buff & 0x3) + printk("unaligned buff %p\n", buff); + __delay(900); /* extra delay of 90 us to test performance hit */ +#endif + BITON; + while (buff < marker) { + sum += *buff++; + sum += *buff++; + sum += *buff++; + sum += *buff++; + sum += *buff++; + sum += *buff++; + sum += *buff++; + sum += *buff++; + } + marker = endMarker - (len % 2); + while (buff < marker) + sum += *buff++; + + if (endMarker > buff) + sum += *(const u8 *)buff; /* add extra byte separately */ + + BITOFF; + return (__force __wsum)sum; +} + +EXPORT_SYMBOL(csum_partial); diff --git a/kernel/arch/cris/arch-v10/lib/string.c b/kernel/arch/cris/arch-v10/lib/string.c new file mode 100644 index 000000000..c7bd6ebdc --- /dev/null +++ b/kernel/arch/cris/arch-v10/lib/string.c @@ -0,0 +1,236 @@ +/* A memcpy for CRIS. + Copyright (C) 1994-2005 Axis Communications. + All rights reserved. + + Redistribution and use in source and binary forms, with or without + modification, are permitted provided that the following conditions + are met: + + 1. Redistributions of source code must retain the above copyright + notice, this list of conditions and the following disclaimer. + + 2. Neither the name of Axis Communications nor the names of its + contributors may be used to endorse or promote products derived + from this software without specific prior written permission. + + THIS SOFTWARE IS PROVIDED BY AXIS COMMUNICATIONS AND ITS CONTRIBUTORS + ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR + A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL AXIS + COMMUNICATIONS OR ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, + INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR + SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, + STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING + IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE + POSSIBILITY OF SUCH DAMAGE. */ + +/* FIXME: This file should really only be used for reference, as the + result is somewhat depending on gcc generating what we expect rather + than what we describe. An assembly file should be used instead. */ + +#include <stddef.h> + +/* Break even between movem and move16 is really at 38.7 * 2, but + modulo 44, so up to the next multiple of 44, we use ordinary code. */ +#define MEMCPY_BY_BLOCK_THRESHOLD (44 * 2) + +/* No name ambiguities in this file. */ +__asm__ (".syntax no_register_prefix"); + +void * +memcpy(void *pdst, const void *psrc, size_t pn) +{ + /* Now we want the parameters put in special registers. + Make sure the compiler is able to make something useful of this. + As it is now: r10 -> r13; r11 -> r11 (nop); r12 -> r12 (nop). + + If gcc was allright, it really would need no temporaries, and no + stack space to save stuff on. */ + + register void *return_dst __asm__ ("r10") = pdst; + register unsigned char *dst __asm__ ("r13") = pdst; + register unsigned const char *src __asm__ ("r11") = psrc; + register int n __asm__ ("r12") = pn; + + /* When src is aligned but not dst, this makes a few extra needless + cycles. I believe it would take as many to check that the + re-alignment was unnecessary. */ + if (((unsigned long) dst & 3) != 0 + /* Don't align if we wouldn't copy more than a few bytes; so we + don't have to check further for overflows. */ + && n >= 3) + { + if ((unsigned long) dst & 1) + { + n--; + *dst = *src; + src++; + dst++; + } + + if ((unsigned long) dst & 2) + { + n -= 2; + *(short *) dst = *(short *) src; + src += 2; + dst += 2; + } + } + + /* Decide which copying method to use. */ + if (n >= MEMCPY_BY_BLOCK_THRESHOLD) + { + /* It is not optimal to tell the compiler about clobbering any + registers; that will move the saving/restoring of those registers + to the function prologue/epilogue, and make non-movem sizes + suboptimal. */ + __asm__ volatile + ("\ + ;; GCC does promise correct register allocations, but let's \n\ + ;; make sure it keeps its promises. \n\ + .ifnc %0-%1-%2,$r13-$r11-$r12 \n\ + .error \"GCC reg alloc bug: %0-%1-%4 != $r13-$r12-$r11\" \n\ + .endif \n\ + \n\ + ;; Save the registers we'll use in the movem process \n\ + ;; on the stack. \n\ + subq 11*4,sp \n\ + movem r10,[sp] \n\ + \n\ + ;; Now we've got this: \n\ + ;; r11 - src \n\ + ;; r13 - dst \n\ + ;; r12 - n \n\ + \n\ + ;; Update n for the first loop. \n\ + subq 44,r12 \n\ +0: \n\ +" +#ifdef __arch_common_v10_v32 + /* Cater to branch offset difference between v32 and v10. We + assume the branch below has an 8-bit offset. */ +" setf\n" +#endif +" movem [r11+],r10 \n\ + subq 44,r12 \n\ + bge 0b \n\ + movem r10,[r13+] \n\ + \n\ + ;; Compensate for last loop underflowing n. \n\ + addq 44,r12 \n\ + \n\ + ;; Restore registers from stack. \n\ + movem [sp+],r10" + + /* Outputs. */ + : "=r" (dst), "=r" (src), "=r" (n) + + /* Inputs. */ + : "0" (dst), "1" (src), "2" (n)); + } + + while (n >= 16) + { + *(long *) dst = *(long *) src; dst += 4; src += 4; + *(long *) dst = *(long *) src; dst += 4; src += 4; + *(long *) dst = *(long *) src; dst += 4; src += 4; + *(long *) dst = *(long *) src; dst += 4; src += 4; + + n -= 16; + } + + switch (n) + { + case 0: + break; + + case 1: + *dst = *src; + break; + + case 2: + *(short *) dst = *(short *) src; + break; + + case 3: + *(short *) dst = *(short *) src; dst += 2; src += 2; + *dst = *src; + break; + + case 4: + *(long *) dst = *(long *) src; + break; + + case 5: + *(long *) dst = *(long *) src; dst += 4; src += 4; + *dst = *src; + break; + + case 6: + *(long *) dst = *(long *) src; dst += 4; src += 4; + *(short *) dst = *(short *) src; + break; + + case 7: + *(long *) dst = *(long *) src; dst += 4; src += 4; + *(short *) dst = *(short *) src; dst += 2; src += 2; + *dst = *src; + break; + + case 8: + *(long *) dst = *(long *) src; dst += 4; src += 4; + *(long *) dst = *(long *) src; + break; + + case 9: + *(long *) dst = *(long *) src; dst += 4; src += 4; + *(long *) dst = *(long *) src; dst += 4; src += 4; + *dst = *src; + break; + + case 10: + *(long *) dst = *(long *) src; dst += 4; src += 4; + *(long *) dst = *(long *) src; dst += 4; src += 4; + *(short *) dst = *(short *) src; + break; + + case 11: + *(long *) dst = *(long *) src; dst += 4; src += 4; + *(long *) dst = *(long *) src; dst += 4; src += 4; + *(short *) dst = *(short *) src; dst += 2; src += 2; + *dst = *src; + break; + + case 12: + *(long *) dst = *(long *) src; dst += 4; src += 4; + *(long *) dst = *(long *) src; dst += 4; src += 4; + *(long *) dst = *(long *) src; + break; + + case 13: + *(long *) dst = *(long *) src; dst += 4; src += 4; + *(long *) dst = *(long *) src; dst += 4; src += 4; + *(long *) dst = *(long *) src; dst += 4; src += 4; + *dst = *src; + break; + + case 14: + *(long *) dst = *(long *) src; dst += 4; src += 4; + *(long *) dst = *(long *) src; dst += 4; src += 4; + *(long *) dst = *(long *) src; dst += 4; src += 4; + *(short *) dst = *(short *) src; + break; + + case 15: + *(long *) dst = *(long *) src; dst += 4; src += 4; + *(long *) dst = *(long *) src; dst += 4; src += 4; + *(long *) dst = *(long *) src; dst += 4; src += 4; + *(short *) dst = *(short *) src; dst += 2; src += 2; + *dst = *src; + break; + } + + return return_dst; +} diff --git a/kernel/arch/cris/arch-v10/lib/usercopy.c b/kernel/arch/cris/arch-v10/lib/usercopy.c new file mode 100644 index 000000000..b964c667a --- /dev/null +++ b/kernel/arch/cris/arch-v10/lib/usercopy.c @@ -0,0 +1,523 @@ +/* + * User address space access functions. + * The non-inlined parts of asm-cris/uaccess.h are here. + * + * Copyright (C) 2000, Axis Communications AB. + * + * Written by Hans-Peter Nilsson. + * Pieces used from memcpy, originally by Kenny Ranerup long time ago. + */ + +#include <asm/uaccess.h> + +/* Asm:s have been tweaked (within the domain of correctness) to give + satisfactory results for "gcc version 2.96 20000427 (experimental)". + + Check regularly... + + Note that the PC saved at a bus-fault is the address *after* the + faulting instruction, which means the branch-target for instructions in + delay-slots for taken branches. Note also that the postincrement in + the instruction is performed regardless of bus-fault; the register is + seen updated in fault handlers. + + Oh, and on the code formatting issue, to whomever feels like "fixing + it" to Conformity: I'm too "lazy", but why don't you go ahead and "fix" + string.c too. I just don't think too many people will hack this file + for the code format to be an issue. */ + + +/* Copy to userspace. This is based on the memcpy used for + kernel-to-kernel copying; see "string.c". */ + +unsigned long __copy_user(void __user *pdst, const void *psrc, unsigned long pn) +{ + /* We want the parameters put in special registers. + Make sure the compiler is able to make something useful of this. + As it is now: r10 -> r13; r11 -> r11 (nop); r12 -> r12 (nop). + + FIXME: Comment for old gcc version. Check. + If gcc was alright, it really would need no temporaries, and no + stack space to save stuff on. */ + + register char *dst __asm__ ("r13") = pdst; + register const char *src __asm__ ("r11") = psrc; + register int n __asm__ ("r12") = pn; + register int retn __asm__ ("r10") = 0; + + + /* When src is aligned but not dst, this makes a few extra needless + cycles. I believe it would take as many to check that the + re-alignment was unnecessary. */ + if (((unsigned long) dst & 3) != 0 + /* Don't align if we wouldn't copy more than a few bytes; so we + don't have to check further for overflows. */ + && n >= 3) + { + if ((unsigned long) dst & 1) + { + __asm_copy_to_user_1 (dst, src, retn); + n--; + } + + if ((unsigned long) dst & 2) + { + __asm_copy_to_user_2 (dst, src, retn); + n -= 2; + } + } + + /* Decide which copying method to use. */ + if (n >= 44*2) /* Break even between movem and + move16 is at 38.7*2, but modulo 44. */ + { + /* For large copies we use 'movem'. */ + + /* It is not optimal to tell the compiler about clobbering any + registers; that will move the saving/restoring of those registers + to the function prologue/epilogue, and make non-movem sizes + suboptimal. + + This method is not foolproof; it assumes that the "asm reg" + declarations at the beginning of the function really are used + here (beware: they may be moved to temporary registers). + This way, we do not have to save/move the registers around into + temporaries; we can safely use them straight away. + + If you want to check that the allocation was right; then + check the equalities in the first comment. It should say + "r13=r13, r11=r11, r12=r12". */ + __asm__ volatile ("\ + .ifnc %0%1%2%3,$r13$r11$r12$r10 \n\ + .err \n\ + .endif \n\ + \n\ + ;; Save the registers we'll use in the movem process \n\ + ;; on the stack. \n\ + subq 11*4,$sp \n\ + movem $r10,[$sp] \n\ + \n\ + ;; Now we've got this: \n\ + ;; r11 - src \n\ + ;; r13 - dst \n\ + ;; r12 - n \n\ + \n\ + ;; Update n for the first loop \n\ + subq 44,$r12 \n\ + \n\ +; Since the noted PC of a faulting instruction in a delay-slot of a taken \n\ +; branch, is that of the branch target, we actually point at the from-movem \n\ +; for this case. There is no ambiguity here; if there was a fault in that \n\ +; instruction (meaning a kernel oops), the faulted PC would be the address \n\ +; after *that* movem. \n\ + \n\ +0: \n\ + movem [$r11+],$r10 \n\ + subq 44,$r12 \n\ + bge 0b \n\ + movem $r10,[$r13+] \n\ +1: \n\ + addq 44,$r12 ;; compensate for last loop underflowing n \n\ + \n\ + ;; Restore registers from stack \n\ + movem [$sp+],$r10 \n\ +2: \n\ + .section .fixup,\"ax\" \n\ + \n\ +; To provide a correct count in r10 of bytes that failed to be copied, \n\ +; we jump back into the loop if the loop-branch was taken. There is no \n\ +; performance penalty for sany use; the program will segfault soon enough.\n\ + \n\ +3: \n\ + move.d [$sp],$r10 \n\ + addq 44,$r10 \n\ + move.d $r10,[$sp] \n\ + jump 0b \n\ +4: \n\ + movem [$sp+],$r10 \n\ + addq 44,$r10 \n\ + addq 44,$r12 \n\ + jump 2b \n\ + \n\ + .previous \n\ + .section __ex_table,\"a\" \n\ + .dword 0b,3b \n\ + .dword 1b,4b \n\ + .previous" + + /* Outputs */ : "=r" (dst), "=r" (src), "=r" (n), "=r" (retn) + /* Inputs */ : "0" (dst), "1" (src), "2" (n), "3" (retn)); + + } + + /* Either we directly start copying, using dword copying in a loop, or + we copy as much as possible with 'movem' and then the last block (<44 + bytes) is copied here. This will work since 'movem' will have + updated SRC, DST and N. */ + + while (n >= 16) + { + __asm_copy_to_user_16 (dst, src, retn); + n -= 16; + } + + /* Having a separate by-four loops cuts down on cache footprint. + FIXME: Test with and without; increasing switch to be 0..15. */ + while (n >= 4) + { + __asm_copy_to_user_4 (dst, src, retn); + n -= 4; + } + + switch (n) + { + case 0: + break; + case 1: + __asm_copy_to_user_1 (dst, src, retn); + break; + case 2: + __asm_copy_to_user_2 (dst, src, retn); + break; + case 3: + __asm_copy_to_user_3 (dst, src, retn); + break; + } + + return retn; +} +EXPORT_SYMBOL(__copy_user); + +/* Copy from user to kernel, zeroing the bytes that were inaccessible in + userland. The return-value is the number of bytes that were + inaccessible. */ + +unsigned long __copy_user_zeroing(void *pdst, const void __user *psrc, + unsigned long pn) +{ + /* We want the parameters put in special registers. + Make sure the compiler is able to make something useful of this. + As it is now: r10 -> r13; r11 -> r11 (nop); r12 -> r12 (nop). + + FIXME: Comment for old gcc version. Check. + If gcc was alright, it really would need no temporaries, and no + stack space to save stuff on. */ + + register char *dst __asm__ ("r13") = pdst; + register const char *src __asm__ ("r11") = psrc; + register int n __asm__ ("r12") = pn; + register int retn __asm__ ("r10") = 0; + + /* The best reason to align src is that we then know that a read-fault + was for aligned bytes; there's no 1..3 remaining good bytes to + pickle. */ + if (((unsigned long) src & 3) != 0) + { + if (((unsigned long) src & 1) && n != 0) + { + __asm_copy_from_user_1 (dst, src, retn); + n--; + } + + if (((unsigned long) src & 2) && n >= 2) + { + __asm_copy_from_user_2 (dst, src, retn); + n -= 2; + } + + /* We only need one check after the unalignment-adjustments, because + if both adjustments were done, either both or neither reference + had an exception. */ + if (retn != 0) + goto copy_exception_bytes; + } + + /* Decide which copying method to use. */ + if (n >= 44*2) /* Break even between movem and + move16 is at 38.7*2, but modulo 44. + FIXME: We use move4 now. */ + { + /* For large copies we use 'movem' */ + + /* It is not optimal to tell the compiler about clobbering any + registers; that will move the saving/restoring of those registers + to the function prologue/epilogue, and make non-movem sizes + suboptimal. + + This method is not foolproof; it assumes that the "asm reg" + declarations at the beginning of the function really are used + here (beware: they may be moved to temporary registers). + This way, we do not have to save/move the registers around into + temporaries; we can safely use them straight away. + + If you want to check that the allocation was right; then + check the equalities in the first comment. It should say + "r13=r13, r11=r11, r12=r12" */ + __asm__ volatile ("\n\ + .ifnc %0%1%2%3,$r13$r11$r12$r10 \n\ + .err \n\ + .endif \n\ + \n\ + ;; Save the registers we'll use in the movem process \n\ + ;; on the stack. \n\ + subq 11*4,$sp \n\ + movem $r10,[$sp] \n\ + \n\ + ;; Now we've got this: \n\ + ;; r11 - src \n\ + ;; r13 - dst \n\ + ;; r12 - n \n\ + \n\ + ;; Update n for the first loop \n\ + subq 44,$r12 \n\ +0: \n\ + movem [$r11+],$r10 \n\ +1: \n\ + subq 44,$r12 \n\ + bge 0b \n\ + movem $r10,[$r13+] \n\ + \n\ + addq 44,$r12 ;; compensate for last loop underflowing n \n\ + \n\ + ;; Restore registers from stack \n\ + movem [$sp+],$r10 \n\ +4: \n\ + .section .fixup,\"ax\" \n\ + \n\ +;; Do not jump back into the loop if we fail. For some uses, we get a \n\ +;; page fault somewhere on the line. Without checking for page limits, \n\ +;; we don't know where, but we need to copy accurately and keep an \n\ +;; accurate count; not just clear the whole line. To do that, we fall \n\ +;; down in the code below, proceeding with smaller amounts. It should \n\ +;; be kept in mind that we have to cater to code like what at one time \n\ +;; was in fs/super.c: \n\ +;; i = size - copy_from_user((void *)page, data, size); \n\ +;; which would cause repeated faults while clearing the remainder of \n\ +;; the SIZE bytes at PAGE after the first fault. \n\ +;; A caveat here is that we must not fall through from a failing page \n\ +;; to a valid page. \n\ + \n\ +3: \n\ + movem [$sp+],$r10 \n\ + addq 44,$r12 ;; Get back count before faulting point. \n\ + subq 44,$r11 ;; Get back pointer to faulting movem-line. \n\ + jump 4b ;; Fall through, pretending the fault didn't happen.\n\ + \n\ + .previous \n\ + .section __ex_table,\"a\" \n\ + .dword 1b,3b \n\ + .previous" + + /* Outputs */ : "=r" (dst), "=r" (src), "=r" (n), "=r" (retn) + /* Inputs */ : "0" (dst), "1" (src), "2" (n), "3" (retn)); + + } + + /* Either we directly start copying here, using dword copying in a loop, + or we copy as much as possible with 'movem' and then the last block + (<44 bytes) is copied here. This will work since 'movem' will have + updated src, dst and n. (Except with failing src.) + + Since we want to keep src accurate, we can't use + __asm_copy_from_user_N with N != (1, 2, 4); it updates dst and + retn, but not src (by design; it's value is ignored elsewhere). */ + + while (n >= 4) + { + __asm_copy_from_user_4 (dst, src, retn); + n -= 4; + + if (retn) + goto copy_exception_bytes; + } + + /* If we get here, there were no memory read faults. */ + switch (n) + { + /* These copies are at least "naturally aligned" (so we don't have + to check each byte), due to the src alignment code before the + movem loop. The *_3 case *will* get the correct count for retn. */ + case 0: + /* This case deliberately left in (if you have doubts check the + generated assembly code). */ + break; + case 1: + __asm_copy_from_user_1 (dst, src, retn); + break; + case 2: + __asm_copy_from_user_2 (dst, src, retn); + break; + case 3: + __asm_copy_from_user_3 (dst, src, retn); + break; + } + + /* If we get here, retn correctly reflects the number of failing + bytes. */ + return retn; + +copy_exception_bytes: + /* We already have "retn" bytes cleared, and need to clear the + remaining "n" bytes. A non-optimized simple byte-for-byte in-line + memset is preferred here, since this isn't speed-critical code and + we'd rather have this a leaf-function than calling memset. */ + { + char *endp; + for (endp = dst + n; dst < endp; dst++) + *dst = 0; + } + + return retn + n; +} +EXPORT_SYMBOL(__copy_user_zeroing); + +/* Zero userspace. */ +unsigned long __do_clear_user(void __user *pto, unsigned long pn) +{ + /* We want the parameters put in special registers. + Make sure the compiler is able to make something useful of this. + As it is now: r10 -> r13; r11 -> r11 (nop); r12 -> r12 (nop). + + FIXME: Comment for old gcc version. Check. + If gcc was alright, it really would need no temporaries, and no + stack space to save stuff on. */ + + register char *dst __asm__ ("r13") = pto; + register int n __asm__ ("r12") = pn; + register int retn __asm__ ("r10") = 0; + + + if (((unsigned long) dst & 3) != 0 + /* Don't align if we wouldn't copy more than a few bytes. */ + && n >= 3) + { + if ((unsigned long) dst & 1) + { + __asm_clear_1 (dst, retn); + n--; + } + + if ((unsigned long) dst & 2) + { + __asm_clear_2 (dst, retn); + n -= 2; + } + } + + /* Decide which copying method to use. + FIXME: This number is from the "ordinary" kernel memset. */ + if (n >= (1*48)) + { + /* For large clears we use 'movem' */ + + /* It is not optimal to tell the compiler about clobbering any + call-saved registers; that will move the saving/restoring of + those registers to the function prologue/epilogue, and make + non-movem sizes suboptimal. + + This method is not foolproof; it assumes that the "asm reg" + declarations at the beginning of the function really are used + here (beware: they may be moved to temporary registers). + This way, we do not have to save/move the registers around into + temporaries; we can safely use them straight away. + + If you want to check that the allocation was right; then + check the equalities in the first comment. It should say + something like "r13=r13, r11=r11, r12=r12". */ + __asm__ volatile ("\n\ + .ifnc %0%1%2,$r13$r12$r10 \n\ + .err \n\ + .endif \n\ + \n\ + ;; Save the registers we'll clobber in the movem process \n\ + ;; on the stack. Don't mention them to gcc, it will only be \n\ + ;; upset. \n\ + subq 11*4,$sp \n\ + movem $r10,[$sp] \n\ + \n\ + clear.d $r0 \n\ + clear.d $r1 \n\ + clear.d $r2 \n\ + clear.d $r3 \n\ + clear.d $r4 \n\ + clear.d $r5 \n\ + clear.d $r6 \n\ + clear.d $r7 \n\ + clear.d $r8 \n\ + clear.d $r9 \n\ + clear.d $r10 \n\ + clear.d $r11 \n\ + \n\ + ;; Now we've got this: \n\ + ;; r13 - dst \n\ + ;; r12 - n \n\ + \n\ + ;; Update n for the first loop \n\ + subq 12*4,$r12 \n\ +0: \n\ + subq 12*4,$r12 \n\ + bge 0b \n\ + movem $r11,[$r13+] \n\ +1: \n\ + addq 12*4,$r12 ;; compensate for last loop underflowing n\n\ + \n\ + ;; Restore registers from stack \n\ + movem [$sp+],$r10 \n\ +2: \n\ + .section .fixup,\"ax\" \n\ +3: \n\ + move.d [$sp],$r10 \n\ + addq 12*4,$r10 \n\ + move.d $r10,[$sp] \n\ + clear.d $r10 \n\ + jump 0b \n\ + \n\ +4: \n\ + movem [$sp+],$r10 \n\ + addq 12*4,$r10 \n\ + addq 12*4,$r12 \n\ + jump 2b \n\ + \n\ + .previous \n\ + .section __ex_table,\"a\" \n\ + .dword 0b,3b \n\ + .dword 1b,4b \n\ + .previous" + + /* Outputs */ : "=r" (dst), "=r" (n), "=r" (retn) + /* Inputs */ : "0" (dst), "1" (n), "2" (retn) + /* Clobber */ : "r11"); + } + + while (n >= 16) + { + __asm_clear_16 (dst, retn); + n -= 16; + } + + /* Having a separate by-four loops cuts down on cache footprint. + FIXME: Test with and without; increasing switch to be 0..15. */ + while (n >= 4) + { + __asm_clear_4 (dst, retn); + n -= 4; + } + + switch (n) + { + case 0: + break; + case 1: + __asm_clear_1 (dst, retn); + break; + case 2: + __asm_clear_2 (dst, retn); + break; + case 3: + __asm_clear_3 (dst, retn); + break; + } + + return retn; +} +EXPORT_SYMBOL(__do_clear_user); diff --git a/kernel/arch/cris/arch-v10/mm/Makefile b/kernel/arch/cris/arch-v10/mm/Makefile new file mode 100644 index 000000000..588b4baee --- /dev/null +++ b/kernel/arch/cris/arch-v10/mm/Makefile @@ -0,0 +1,6 @@ +# +# Makefile for the linux cris-specific parts of the memory manager. +# + +obj-y := fault.o init.o tlb.o + diff --git a/kernel/arch/cris/arch-v10/mm/fault.c b/kernel/arch/cris/arch-v10/mm/fault.c new file mode 100644 index 000000000..ed60588f8 --- /dev/null +++ b/kernel/arch/cris/arch-v10/mm/fault.c @@ -0,0 +1,95 @@ +/* + * linux/arch/cris/mm/fault.c + * + * Low level bus fault handler + * + * + * Copyright (C) 2000-2007 Axis Communications AB + * + * Authors: Bjorn Wesen + * + */ + +#include <linux/mm.h> +#include <asm/uaccess.h> +#include <asm/pgtable.h> +#include <arch/svinto.h> +#include <asm/mmu_context.h> + +/* debug of low-level TLB reload */ +#undef DEBUG + +#ifdef DEBUG +#define D(x) x +#else +#define D(x) +#endif + +extern const struct exception_table_entry + *search_exception_tables(unsigned long addr); + +asmlinkage void do_page_fault(unsigned long address, struct pt_regs *regs, + int protection, int writeaccess); + +/* fast TLB-fill fault handler + * this is called from entry.S with interrupts disabled + */ + +void +handle_mmu_bus_fault(struct pt_regs *regs) +{ + int cause; + int select; +#ifdef DEBUG + int index; + int page_id; + int acc, inv; +#endif + pgd_t* pgd = (pgd_t*)per_cpu(current_pgd, smp_processor_id()); + pmd_t *pmd; + pte_t pte; + int miss, we, writeac; + unsigned long address; + unsigned long flags; + + cause = *R_MMU_CAUSE; + + address = cause & PAGE_MASK; /* get faulting address */ + select = *R_TLB_SELECT; + +#ifdef DEBUG + page_id = IO_EXTRACT(R_MMU_CAUSE, page_id, cause); + acc = IO_EXTRACT(R_MMU_CAUSE, acc_excp, cause); + inv = IO_EXTRACT(R_MMU_CAUSE, inv_excp, cause); + index = IO_EXTRACT(R_TLB_SELECT, index, select); +#endif + miss = IO_EXTRACT(R_MMU_CAUSE, miss_excp, cause); + we = IO_EXTRACT(R_MMU_CAUSE, we_excp, cause); + writeac = IO_EXTRACT(R_MMU_CAUSE, wr_rd, cause); + + D(printk("bus_fault from IRP 0x%lx: addr 0x%lx, miss %d, inv %d, we %d, acc %d, dx %d pid %d\n", + regs->irp, address, miss, inv, we, acc, index, page_id)); + + /* leave it to the MM system fault handler */ + if (miss) + do_page_fault(address, regs, 0, writeac); + else + do_page_fault(address, regs, 1, we); + + /* Reload TLB with new entry to avoid an extra miss exception. + * do_page_fault may have flushed the TLB so we have to restore + * the MMU registers. + */ + local_irq_save(flags); + pmd = (pmd_t *)(pgd + pgd_index(address)); + if (pmd_none(*pmd)) + goto exit; + pte = *pte_offset_kernel(pmd, address); + if (!pte_present(pte)) + goto exit; + *R_TLB_SELECT = select; + *R_TLB_HI = cause; + *R_TLB_LO = pte_val(pte); +exit: + local_irq_restore(flags); +} diff --git a/kernel/arch/cris/arch-v10/mm/init.c b/kernel/arch/cris/arch-v10/mm/init.c new file mode 100644 index 000000000..e7f806610 --- /dev/null +++ b/kernel/arch/cris/arch-v10/mm/init.c @@ -0,0 +1,263 @@ +/* + * linux/arch/cris/arch-v10/mm/init.c + * + */ +#include <linux/mmzone.h> +#include <linux/init.h> +#include <linux/bootmem.h> +#include <linux/mm.h> +#include <asm/pgtable.h> +#include <asm/page.h> +#include <asm/types.h> +#include <asm/mmu.h> +#include <asm/io.h> +#include <asm/mmu_context.h> +#include <arch/svinto.h> + +extern void tlb_init(void); + +/* + * The kernel is already mapped with a kernel segment at kseg_c so + * we don't need to map it with a page table. However head.S also + * temporarily mapped it at kseg_4 so we should set up the ksegs again, + * clear the TLB and do some other paging setup stuff. + */ + +void __init +paging_init(void) +{ + int i; + unsigned long zones_size[MAX_NR_ZONES]; + + printk("Setting up paging and the MMU.\n"); + + /* clear out the init_mm.pgd that will contain the kernel's mappings */ + + for(i = 0; i < PTRS_PER_PGD; i++) + swapper_pg_dir[i] = __pgd(0); + + /* make sure the current pgd table points to something sane + * (even if it is most probably not used until the next + * switch_mm) + */ + + per_cpu(current_pgd, smp_processor_id()) = init_mm.pgd; + + /* initialise the TLB (tlb.c) */ + + tlb_init(); + + /* see README.mm for details on the KSEG setup */ + +#ifdef CONFIG_CRIS_LOW_MAP + /* Etrax-100 LX version 1 has a bug so that we cannot map anything + * across the 0x80000000 boundary, so we need to shrink the user-virtual + * area to 0x50000000 instead of 0xb0000000 and map things slightly + * different. The unused areas are marked as paged so that we can catch + * freak kernel accesses there. + * + * The ARTPEC chip is mapped at 0xa so we pass that segment straight + * through. We cannot vremap it because the vmalloc area is below 0x8 + * and Juliette needs an uncached area above 0x8. + * + * Same thing with 0xc and 0x9, which is memory-mapped I/O on some boards. + * We map them straight over in LOW_MAP, but use vremap in LX version 2. + */ + +#define CACHED_BOOTROM (KSEG_F | 0x08000000UL) + + *R_MMU_KSEG = ( IO_STATE(R_MMU_KSEG, seg_f, seg ) | /* bootrom */ + IO_STATE(R_MMU_KSEG, seg_e, page ) | + IO_STATE(R_MMU_KSEG, seg_d, page ) | + IO_STATE(R_MMU_KSEG, seg_c, page ) | + IO_STATE(R_MMU_KSEG, seg_b, seg ) | /* kernel reg area */ +#ifdef CONFIG_JULIETTE + IO_STATE(R_MMU_KSEG, seg_a, seg ) | /* ARTPEC etc. */ +#else + IO_STATE(R_MMU_KSEG, seg_a, page ) | +#endif + IO_STATE(R_MMU_KSEG, seg_9, seg ) | /* LED's on some boards */ + IO_STATE(R_MMU_KSEG, seg_8, seg ) | /* CSE0/1, flash and I/O */ + IO_STATE(R_MMU_KSEG, seg_7, page ) | /* kernel vmalloc area */ + IO_STATE(R_MMU_KSEG, seg_6, seg ) | /* kernel DRAM area */ + IO_STATE(R_MMU_KSEG, seg_5, seg ) | /* cached flash */ + IO_STATE(R_MMU_KSEG, seg_4, page ) | /* user area */ + IO_STATE(R_MMU_KSEG, seg_3, page ) | /* user area */ + IO_STATE(R_MMU_KSEG, seg_2, page ) | /* user area */ + IO_STATE(R_MMU_KSEG, seg_1, page ) | /* user area */ + IO_STATE(R_MMU_KSEG, seg_0, page ) ); /* user area */ + + *R_MMU_KBASE_HI = ( IO_FIELD(R_MMU_KBASE_HI, base_f, 0x3 ) | + IO_FIELD(R_MMU_KBASE_HI, base_e, 0x0 ) | + IO_FIELD(R_MMU_KBASE_HI, base_d, 0x0 ) | + IO_FIELD(R_MMU_KBASE_HI, base_c, 0x0 ) | + IO_FIELD(R_MMU_KBASE_HI, base_b, 0xb ) | +#ifdef CONFIG_JULIETTE + IO_FIELD(R_MMU_KBASE_HI, base_a, 0xa ) | +#else + IO_FIELD(R_MMU_KBASE_HI, base_a, 0x0 ) | +#endif + IO_FIELD(R_MMU_KBASE_HI, base_9, 0x9 ) | + IO_FIELD(R_MMU_KBASE_HI, base_8, 0x8 ) ); + + *R_MMU_KBASE_LO = ( IO_FIELD(R_MMU_KBASE_LO, base_7, 0x0 ) | + IO_FIELD(R_MMU_KBASE_LO, base_6, 0x4 ) | + IO_FIELD(R_MMU_KBASE_LO, base_5, 0x0 ) | + IO_FIELD(R_MMU_KBASE_LO, base_4, 0x0 ) | + IO_FIELD(R_MMU_KBASE_LO, base_3, 0x0 ) | + IO_FIELD(R_MMU_KBASE_LO, base_2, 0x0 ) | + IO_FIELD(R_MMU_KBASE_LO, base_1, 0x0 ) | + IO_FIELD(R_MMU_KBASE_LO, base_0, 0x0 ) ); +#else + /* This code is for the corrected Etrax-100 LX version 2... */ + +#define CACHED_BOOTROM (KSEG_A | 0x08000000UL) + + *R_MMU_KSEG = ( IO_STATE(R_MMU_KSEG, seg_f, seg ) | /* cached flash */ + IO_STATE(R_MMU_KSEG, seg_e, seg ) | /* uncached flash */ + IO_STATE(R_MMU_KSEG, seg_d, page ) | /* vmalloc area */ + IO_STATE(R_MMU_KSEG, seg_c, seg ) | /* kernel area */ + IO_STATE(R_MMU_KSEG, seg_b, seg ) | /* kernel reg area */ + IO_STATE(R_MMU_KSEG, seg_a, seg ) | /* bootrom */ + IO_STATE(R_MMU_KSEG, seg_9, page ) | /* user area */ + IO_STATE(R_MMU_KSEG, seg_8, page ) | + IO_STATE(R_MMU_KSEG, seg_7, page ) | + IO_STATE(R_MMU_KSEG, seg_6, page ) | + IO_STATE(R_MMU_KSEG, seg_5, page ) | + IO_STATE(R_MMU_KSEG, seg_4, page ) | + IO_STATE(R_MMU_KSEG, seg_3, page ) | + IO_STATE(R_MMU_KSEG, seg_2, page ) | + IO_STATE(R_MMU_KSEG, seg_1, page ) | + IO_STATE(R_MMU_KSEG, seg_0, page ) ); + + *R_MMU_KBASE_HI = ( IO_FIELD(R_MMU_KBASE_HI, base_f, 0x0 ) | + IO_FIELD(R_MMU_KBASE_HI, base_e, 0x8 ) | + IO_FIELD(R_MMU_KBASE_HI, base_d, 0x0 ) | + IO_FIELD(R_MMU_KBASE_HI, base_c, 0x4 ) | + IO_FIELD(R_MMU_KBASE_HI, base_b, 0xb ) | + IO_FIELD(R_MMU_KBASE_HI, base_a, 0x3 ) | + IO_FIELD(R_MMU_KBASE_HI, base_9, 0x0 ) | + IO_FIELD(R_MMU_KBASE_HI, base_8, 0x0 ) ); + + *R_MMU_KBASE_LO = ( IO_FIELD(R_MMU_KBASE_LO, base_7, 0x0 ) | + IO_FIELD(R_MMU_KBASE_LO, base_6, 0x0 ) | + IO_FIELD(R_MMU_KBASE_LO, base_5, 0x0 ) | + IO_FIELD(R_MMU_KBASE_LO, base_4, 0x0 ) | + IO_FIELD(R_MMU_KBASE_LO, base_3, 0x0 ) | + IO_FIELD(R_MMU_KBASE_LO, base_2, 0x0 ) | + IO_FIELD(R_MMU_KBASE_LO, base_1, 0x0 ) | + IO_FIELD(R_MMU_KBASE_LO, base_0, 0x0 ) ); +#endif + + *R_MMU_CONTEXT = ( IO_FIELD(R_MMU_CONTEXT, page_id, 0 ) ); + + /* The MMU has been enabled ever since head.S but just to make + * it totally obvious we do it here as well. + */ + + *R_MMU_CTRL = ( IO_STATE(R_MMU_CTRL, inv_excp, enable ) | + IO_STATE(R_MMU_CTRL, acc_excp, enable ) | + IO_STATE(R_MMU_CTRL, we_excp, enable ) ); + + *R_MMU_ENABLE = IO_STATE(R_MMU_ENABLE, mmu_enable, enable); + + /* + * initialize the bad page table and bad page to point + * to a couple of allocated pages + */ + + empty_zero_page = (unsigned long)alloc_bootmem_pages(PAGE_SIZE); + memset((void *)empty_zero_page, 0, PAGE_SIZE); + + /* All pages are DMA'able in Etrax, so put all in the DMA'able zone */ + + zones_size[0] = ((unsigned long)high_memory - PAGE_OFFSET) >> PAGE_SHIFT; + + for (i = 1; i < MAX_NR_ZONES; i++) + zones_size[i] = 0; + + /* Use free_area_init_node instead of free_area_init, because the former + * is designed for systems where the DRAM starts at an address substantially + * higher than 0, like us (we start at PAGE_OFFSET). This saves space in the + * mem_map page array. + */ + + free_area_init_node(0, zones_size, PAGE_OFFSET >> PAGE_SHIFT, 0); +} + +/* Initialize remaps of some I/O-ports. It is important that this + * is called before any driver is initialized. + */ + +static int +__init init_ioremap(void) +{ + + /* Give the external I/O-port addresses their values */ + +#ifdef CONFIG_CRIS_LOW_MAP + /* Simply a linear map (see the KSEG map above in paging_init) */ + port_cse1_addr = (volatile unsigned long *)(MEM_CSE1_START | + MEM_NON_CACHEABLE); + port_csp0_addr = (volatile unsigned long *)(MEM_CSP0_START | + MEM_NON_CACHEABLE); + port_csp4_addr = (volatile unsigned long *)(MEM_CSP4_START | + MEM_NON_CACHEABLE); +#else + /* Note that nothing blows up just because we do this remapping + * it's ok even if the ports are not used or connected + * to anything (or connected to a non-I/O thing) */ + port_cse1_addr = (volatile unsigned long *) + ioremap((unsigned long)(MEM_CSE1_START | MEM_NON_CACHEABLE), 16); + port_csp0_addr = (volatile unsigned long *) + ioremap((unsigned long)(MEM_CSP0_START | MEM_NON_CACHEABLE), 16); + port_csp4_addr = (volatile unsigned long *) + ioremap((unsigned long)(MEM_CSP4_START | MEM_NON_CACHEABLE), 16); +#endif + return 0; +} + +__initcall(init_ioremap); + +/* Helper function for the two below */ + +static inline void +flush_etrax_cacherange(void *startadr, int length) +{ + /* CACHED_BOOTROM is mapped to the boot-rom area (cached) which + * we can use to get fast dummy-reads of cachelines + */ + + volatile short *flushadr = (volatile short *)(((unsigned long)startadr & ~PAGE_MASK) | + CACHED_BOOTROM); + + length = length > 8192 ? 8192 : length; /* No need to flush more than cache size */ + + while(length > 0) { + *flushadr; /* dummy read to flush */ + flushadr += (32/sizeof(short)); /* a cacheline is 32 bytes */ + length -= 32; + } +} + +/* Due to a bug in Etrax100(LX) all versions, receiving DMA buffers + * will occasionally corrupt certain CPU writes if the DMA buffers + * happen to be hot in the cache. + * + * As a workaround, we have to flush the relevant parts of the cache + * before (re) inserting any receiving descriptor into the DMA HW. + */ + +void +prepare_rx_descriptor(struct etrax_dma_descr *desc) +{ + flush_etrax_cacherange((void *)desc->buf, desc->sw_len ? desc->sw_len : 65536); +} + +/* Do the same thing but flush the entire cache */ + +void +flush_etrax_cache(void) +{ + flush_etrax_cacherange(0, 8192); +} diff --git a/kernel/arch/cris/arch-v10/mm/tlb.c b/kernel/arch/cris/arch-v10/mm/tlb.c new file mode 100644 index 000000000..21d78c599 --- /dev/null +++ b/kernel/arch/cris/arch-v10/mm/tlb.c @@ -0,0 +1,176 @@ +/* + * linux/arch/cris/arch-v10/mm/tlb.c + * + * Low level TLB handling + * + * + * Copyright (C) 2000-2007 Axis Communications AB + * + * Authors: Bjorn Wesen (bjornw@axis.com) + * + */ + +#include <asm/tlb.h> +#include <asm/mmu_context.h> +#include <arch/svinto.h> + +#define D(x) + +/* The TLB can host up to 64 different mm contexts at the same time. + * The running context is R_MMU_CONTEXT, and each TLB entry contains a + * page_id that has to match to give a hit. In page_id_map, we keep track + * of which mm's we have assigned which page_id's, so that we know when + * to invalidate TLB entries. + * + * The last page_id is never running - it is used as an invalid page_id + * so we can make TLB entries that will never match. + * + * Notice that we need to make the flushes atomic, otherwise an interrupt + * handler that uses vmalloced memory might cause a TLB load in the middle + * of a flush causing. + */ + +/* invalidate all TLB entries */ + +void +flush_tlb_all(void) +{ + int i; + unsigned long flags; + + /* the vpn of i & 0xf is so we dont write similar TLB entries + * in the same 4-way entry group. details... + */ + + local_irq_save(flags); + for(i = 0; i < NUM_TLB_ENTRIES; i++) { + *R_TLB_SELECT = ( IO_FIELD(R_TLB_SELECT, index, i) ); + *R_TLB_HI = ( IO_FIELD(R_TLB_HI, page_id, INVALID_PAGEID ) | + IO_FIELD(R_TLB_HI, vpn, i & 0xf ) ); + + *R_TLB_LO = ( IO_STATE(R_TLB_LO, global,no ) | + IO_STATE(R_TLB_LO, valid, no ) | + IO_STATE(R_TLB_LO, kernel,no ) | + IO_STATE(R_TLB_LO, we, no ) | + IO_FIELD(R_TLB_LO, pfn, 0 ) ); + } + local_irq_restore(flags); + D(printk("tlb: flushed all\n")); +} + +/* invalidate the selected mm context only */ + +void +flush_tlb_mm(struct mm_struct *mm) +{ + int i; + int page_id = mm->context.page_id; + unsigned long flags; + + D(printk("tlb: flush mm context %d (%p)\n", page_id, mm)); + + if(page_id == NO_CONTEXT) + return; + + /* mark the TLB entries that match the page_id as invalid. + * here we could also check the _PAGE_GLOBAL bit and NOT flush + * global pages. is it worth the extra I/O ? + */ + + local_irq_save(flags); + for(i = 0; i < NUM_TLB_ENTRIES; i++) { + *R_TLB_SELECT = IO_FIELD(R_TLB_SELECT, index, i); + if (IO_EXTRACT(R_TLB_HI, page_id, *R_TLB_HI) == page_id) { + *R_TLB_HI = ( IO_FIELD(R_TLB_HI, page_id, INVALID_PAGEID ) | + IO_FIELD(R_TLB_HI, vpn, i & 0xf ) ); + + *R_TLB_LO = ( IO_STATE(R_TLB_LO, global,no ) | + IO_STATE(R_TLB_LO, valid, no ) | + IO_STATE(R_TLB_LO, kernel,no ) | + IO_STATE(R_TLB_LO, we, no ) | + IO_FIELD(R_TLB_LO, pfn, 0 ) ); + } + } + local_irq_restore(flags); +} + +/* invalidate a single page */ + +void flush_tlb_page(struct vm_area_struct *vma, unsigned long addr) +{ + struct mm_struct *mm = vma->vm_mm; + int page_id = mm->context.page_id; + int i; + unsigned long flags; + + D(printk("tlb: flush page %p in context %d (%p)\n", addr, page_id, mm)); + + if(page_id == NO_CONTEXT) + return; + + addr &= PAGE_MASK; /* perhaps not necessary */ + + /* invalidate those TLB entries that match both the mm context + * and the virtual address requested + */ + + local_irq_save(flags); + for(i = 0; i < NUM_TLB_ENTRIES; i++) { + unsigned long tlb_hi; + *R_TLB_SELECT = IO_FIELD(R_TLB_SELECT, index, i); + tlb_hi = *R_TLB_HI; + if (IO_EXTRACT(R_TLB_HI, page_id, tlb_hi) == page_id && + (tlb_hi & PAGE_MASK) == addr) { + *R_TLB_HI = IO_FIELD(R_TLB_HI, page_id, INVALID_PAGEID ) | + addr; /* same addr as before works. */ + + *R_TLB_LO = ( IO_STATE(R_TLB_LO, global,no ) | + IO_STATE(R_TLB_LO, valid, no ) | + IO_STATE(R_TLB_LO, kernel,no ) | + IO_STATE(R_TLB_LO, we, no ) | + IO_FIELD(R_TLB_LO, pfn, 0 ) ); + } + } + local_irq_restore(flags); +} + +/* + * Initialize the context related info for a new mm_struct + * instance. + */ + +int +init_new_context(struct task_struct *tsk, struct mm_struct *mm) +{ + mm->context.page_id = NO_CONTEXT; + return 0; +} + +/* called in schedule() just before actually doing the switch_to */ + +void switch_mm(struct mm_struct *prev, struct mm_struct *next, + struct task_struct *tsk) +{ + if (prev != next) { + /* make sure we have a context */ + get_mmu_context(next); + + /* remember the pgd for the fault handlers + * this is similar to the pgd register in some other CPU's. + * we need our own copy of it because current and active_mm + * might be invalid at points where we still need to derefer + * the pgd. + */ + + per_cpu(current_pgd, smp_processor_id()) = next->pgd; + + /* switch context in the MMU */ + + D(printk(KERN_DEBUG "switching mmu_context to %d (%p)\n", + next->context, next)); + + *R_MMU_CONTEXT = IO_FIELD(R_MMU_CONTEXT, + page_id, next->context.page_id); + } +} + diff --git a/kernel/arch/cris/arch-v10/output_arch.ld b/kernel/arch/cris/arch-v10/output_arch.ld new file mode 100644 index 000000000..2f3288006 --- /dev/null +++ b/kernel/arch/cris/arch-v10/output_arch.ld @@ -0,0 +1,2 @@ +/* At the time of this writing, there's no equivalent ld option. */ +OUTPUT_ARCH (cris) |