diff options
Diffstat (limited to 'kernel/arch/cris/arch-v10/drivers/gpio.c')
| -rw-r--r-- | kernel/arch/cris/arch-v10/drivers/gpio.c | 856 |
1 files changed, 856 insertions, 0 deletions
diff --git a/kernel/arch/cris/arch-v10/drivers/gpio.c b/kernel/arch/cris/arch-v10/drivers/gpio.c new file mode 100644 index 000000000..64285e0d3 --- /dev/null +++ b/kernel/arch/cris/arch-v10/drivers/gpio.c @@ -0,0 +1,856 @@ +/* + * Etrax general port I/O device + * + * Copyright (c) 1999-2007 Axis Communications AB + * + * Authors: Bjorn Wesen (initial version) + * Ola Knutsson (LED handling) + * Johan Adolfsson (read/set directions, write, port G) + */ + + +#include <linux/module.h> +#include <linux/sched.h> +#include <linux/slab.h> +#include <linux/ioport.h> +#include <linux/errno.h> +#include <linux/kernel.h> +#include <linux/fs.h> +#include <linux/string.h> +#include <linux/poll.h> +#include <linux/init.h> +#include <linux/interrupt.h> + +#include <asm/etraxgpio.h> +#include <arch/svinto.h> +#include <asm/io.h> +#include <asm/irq.h> +#include <arch/io_interface_mux.h> + +#define GPIO_MAJOR 120 /* experimental MAJOR number */ + +#define D(x) + +#if 0 +static int dp_cnt; +#define DP(x) do { dp_cnt++; if (dp_cnt % 1000 == 0) x; }while(0) +#else +#define DP(x) +#endif + +static char gpio_name[] = "etrax gpio"; + +#if 0 +static wait_queue_head_t *gpio_wq; +#endif + +static long gpio_ioctl(struct file *file, unsigned int cmd, unsigned long arg); +static ssize_t gpio_write(struct file *file, const char __user *buf, + size_t count, loff_t *off); +static int gpio_open(struct inode *inode, struct file *filp); +static int gpio_release(struct inode *inode, struct file *filp); +static unsigned int gpio_poll(struct file *filp, struct poll_table_struct *wait); + +/* private data per open() of this driver */ + +struct gpio_private { + struct gpio_private *next; + /* These fields are for PA and PB only */ + volatile unsigned char *port, *shadow; + volatile unsigned char *dir, *dir_shadow; + unsigned char changeable_dir; + unsigned char changeable_bits; + unsigned char clk_mask; + unsigned char data_mask; + unsigned char write_msb; + unsigned char pad1, pad2, pad3; + /* These fields are generic */ + unsigned long highalarm, lowalarm; + wait_queue_head_t alarm_wq; + int minor; +}; + +/* linked list of alarms to check for */ + +static struct gpio_private *alarmlist; + +static int gpio_some_alarms; /* Set if someone uses alarm */ +static unsigned long gpio_pa_irq_enabled_mask; + +static DEFINE_SPINLOCK(gpio_lock); /* Protect directions etc */ + +/* Port A and B use 8 bit access, but Port G is 32 bit */ +#define NUM_PORTS (GPIO_MINOR_B+1) + +static volatile unsigned char *ports[NUM_PORTS] = { + R_PORT_PA_DATA, + R_PORT_PB_DATA, +}; +static volatile unsigned char *shads[NUM_PORTS] = { + &port_pa_data_shadow, + &port_pb_data_shadow +}; + +/* What direction bits that are user changeable 1=changeable*/ +#ifndef CONFIG_ETRAX_PA_CHANGEABLE_DIR +#define CONFIG_ETRAX_PA_CHANGEABLE_DIR 0x00 +#endif +#ifndef CONFIG_ETRAX_PB_CHANGEABLE_DIR +#define CONFIG_ETRAX_PB_CHANGEABLE_DIR 0x00 +#endif + +#ifndef CONFIG_ETRAX_PA_CHANGEABLE_BITS +#define CONFIG_ETRAX_PA_CHANGEABLE_BITS 0xFF +#endif +#ifndef CONFIG_ETRAX_PB_CHANGEABLE_BITS +#define CONFIG_ETRAX_PB_CHANGEABLE_BITS 0xFF +#endif + + +static unsigned char changeable_dir[NUM_PORTS] = { + CONFIG_ETRAX_PA_CHANGEABLE_DIR, + CONFIG_ETRAX_PB_CHANGEABLE_DIR +}; +static unsigned char changeable_bits[NUM_PORTS] = { + CONFIG_ETRAX_PA_CHANGEABLE_BITS, + CONFIG_ETRAX_PB_CHANGEABLE_BITS +}; + +static volatile unsigned char *dir[NUM_PORTS] = { + R_PORT_PA_DIR, + R_PORT_PB_DIR +}; + +static volatile unsigned char *dir_shadow[NUM_PORTS] = { + &port_pa_dir_shadow, + &port_pb_dir_shadow +}; + +/* All bits in port g that can change dir. */ +static const unsigned long int changeable_dir_g_mask = 0x01FFFF01; + +/* Port G is 32 bit, handle it special, some bits are both inputs + and outputs at the same time, only some of the bits can change direction + and some of them in groups of 8 bit. */ +static unsigned long changeable_dir_g; +static unsigned long dir_g_in_bits; +static unsigned long dir_g_out_bits; +static unsigned long dir_g_shadow; /* 1=output */ + +#define USE_PORTS(priv) ((priv)->minor <= GPIO_MINOR_B) + + +static unsigned int gpio_poll(struct file *file, poll_table *wait) +{ + unsigned int mask = 0; + struct gpio_private *priv = file->private_data; + unsigned long data; + unsigned long flags; + + spin_lock_irqsave(&gpio_lock, flags); + + poll_wait(file, &priv->alarm_wq, wait); + if (priv->minor == GPIO_MINOR_A) { + unsigned long tmp; + data = *R_PORT_PA_DATA; + /* PA has support for high level interrupt - + * lets activate for those low and with highalarm set + */ + tmp = ~data & priv->highalarm & 0xFF; + tmp = (tmp << R_IRQ_MASK1_SET__pa0__BITNR); + + gpio_pa_irq_enabled_mask |= tmp; + *R_IRQ_MASK1_SET = tmp; + } else if (priv->minor == GPIO_MINOR_B) + data = *R_PORT_PB_DATA; + else if (priv->minor == GPIO_MINOR_G) + data = *R_PORT_G_DATA; + else { + mask = 0; + goto out; + } + + if ((data & priv->highalarm) || + (~data & priv->lowalarm)) { + mask = POLLIN|POLLRDNORM; + } + +out: + spin_unlock_irqrestore(&gpio_lock, flags); + DP(printk("gpio_poll ready: mask 0x%08X\n", mask)); + + return mask; +} + +int etrax_gpio_wake_up_check(void) +{ + struct gpio_private *priv; + unsigned long data = 0; + int ret = 0; + unsigned long flags; + + spin_lock_irqsave(&gpio_lock, flags); + priv = alarmlist; + while (priv) { + if (USE_PORTS(priv)) + data = *priv->port; + else if (priv->minor == GPIO_MINOR_G) + data = *R_PORT_G_DATA; + + if ((data & priv->highalarm) || + (~data & priv->lowalarm)) { + DP(printk("etrax_gpio_wake_up_check %i\n",priv->minor)); + wake_up_interruptible(&priv->alarm_wq); + ret = 1; + } + priv = priv->next; + } + spin_unlock_irqrestore(&gpio_lock, flags); + return ret; +} + +static irqreturn_t +gpio_poll_timer_interrupt(int irq, void *dev_id) +{ + if (gpio_some_alarms) { + etrax_gpio_wake_up_check(); + return IRQ_HANDLED; + } + return IRQ_NONE; +} + +static irqreturn_t +gpio_interrupt(int irq, void *dev_id) +{ + unsigned long tmp; + unsigned long flags; + + spin_lock_irqsave(&gpio_lock, flags); + + /* Find what PA interrupts are active */ + tmp = (*R_IRQ_READ1); + + /* Find those that we have enabled */ + tmp &= gpio_pa_irq_enabled_mask; + + /* Clear them.. */ + *R_IRQ_MASK1_CLR = tmp; + gpio_pa_irq_enabled_mask &= ~tmp; + + spin_unlock_irqrestore(&gpio_lock, flags); + + if (gpio_some_alarms) + return IRQ_RETVAL(etrax_gpio_wake_up_check()); + + return IRQ_NONE; +} + +static void gpio_write_bit(struct gpio_private *priv, + unsigned char data, int bit) +{ + *priv->port = *priv->shadow &= ~(priv->clk_mask); + if (data & 1 << bit) + *priv->port = *priv->shadow |= priv->data_mask; + else + *priv->port = *priv->shadow &= ~(priv->data_mask); + + /* For FPGA: min 5.0ns (DCC) before CCLK high */ + *priv->port = *priv->shadow |= priv->clk_mask; +} + +static void gpio_write_byte(struct gpio_private *priv, unsigned char data) +{ + int i; + + if (priv->write_msb) + for (i = 7; i >= 0; i--) + gpio_write_bit(priv, data, i); + else + for (i = 0; i <= 7; i++) + gpio_write_bit(priv, data, i); +} + +static ssize_t gpio_write(struct file *file, const char __user *buf, + size_t count, loff_t *off) +{ + struct gpio_private *priv = file->private_data; + unsigned long flags; + ssize_t retval = count; + + if (priv->minor != GPIO_MINOR_A && priv->minor != GPIO_MINOR_B) + return -EFAULT; + + if (!access_ok(VERIFY_READ, buf, count)) + return -EFAULT; + + spin_lock_irqsave(&gpio_lock, flags); + + /* It must have been configured using the IO_CFG_WRITE_MODE */ + /* Perhaps a better error code? */ + if (priv->clk_mask == 0 || priv->data_mask == 0) { + retval = -EPERM; + goto out; + } + + D(printk(KERN_DEBUG "gpio_write: %02X to data 0x%02X " + "clk 0x%02X msb: %i\n", + count, priv->data_mask, priv->clk_mask, priv->write_msb)); + + while (count--) + gpio_write_byte(priv, *buf++); + +out: + spin_unlock_irqrestore(&gpio_lock, flags); + return retval; +} + + + +static int +gpio_open(struct inode *inode, struct file *filp) +{ + struct gpio_private *priv; + int p = iminor(inode); + unsigned long flags; + + if (p > GPIO_MINOR_LAST) + return -EINVAL; + + priv = kzalloc(sizeof(struct gpio_private), GFP_KERNEL); + + if (!priv) + return -ENOMEM; + + priv->minor = p; + + /* initialize the io/alarm struct */ + + if (USE_PORTS(priv)) { /* A and B */ + priv->port = ports[p]; + priv->shadow = shads[p]; + priv->dir = dir[p]; + priv->dir_shadow = dir_shadow[p]; + priv->changeable_dir = changeable_dir[p]; + priv->changeable_bits = changeable_bits[p]; + } else { + priv->port = NULL; + priv->shadow = NULL; + priv->dir = NULL; + priv->dir_shadow = NULL; + priv->changeable_dir = 0; + priv->changeable_bits = 0; + } + + priv->highalarm = 0; + priv->lowalarm = 0; + priv->clk_mask = 0; + priv->data_mask = 0; + init_waitqueue_head(&priv->alarm_wq); + + filp->private_data = priv; + + /* link it into our alarmlist */ + spin_lock_irqsave(&gpio_lock, flags); + priv->next = alarmlist; + alarmlist = priv; + spin_unlock_irqrestore(&gpio_lock, flags); + + return 0; +} + +static int +gpio_release(struct inode *inode, struct file *filp) +{ + struct gpio_private *p; + struct gpio_private *todel; + unsigned long flags; + + spin_lock_irqsave(&gpio_lock, flags); + + p = alarmlist; + todel = filp->private_data; + + /* unlink from alarmlist and free the private structure */ + + if (p == todel) { + alarmlist = todel->next; + } else { + while (p->next != todel) + p = p->next; + p->next = todel->next; + } + + kfree(todel); + /* Check if there are still any alarms set */ + p = alarmlist; + while (p) { + if (p->highalarm | p->lowalarm) { + gpio_some_alarms = 1; + goto out; + } + p = p->next; + } + gpio_some_alarms = 0; +out: + spin_unlock_irqrestore(&gpio_lock, flags); + return 0; +} + +/* Main device API. ioctl's to read/set/clear bits, as well as to + * set alarms to wait for using a subsequent select(). + */ +unsigned long inline setget_input(struct gpio_private *priv, unsigned long arg) +{ + /* Set direction 0=unchanged 1=input, + * return mask with 1=input */ + if (USE_PORTS(priv)) { + *priv->dir = *priv->dir_shadow &= + ~((unsigned char)arg & priv->changeable_dir); + return ~(*priv->dir_shadow) & 0xFF; /* Only 8 bits */ + } + + if (priv->minor != GPIO_MINOR_G) + return 0; + + /* We must fiddle with R_GEN_CONFIG to change dir */ + if (((arg & dir_g_in_bits) != arg) && + (arg & changeable_dir_g)) { + arg &= changeable_dir_g; + /* Clear bits in genconfig to set to input */ + if (arg & (1<<0)) { + genconfig_shadow &= ~IO_MASK(R_GEN_CONFIG, g0dir); + dir_g_in_bits |= (1<<0); + dir_g_out_bits &= ~(1<<0); + } + if ((arg & 0x0000FF00) == 0x0000FF00) { + genconfig_shadow &= ~IO_MASK(R_GEN_CONFIG, g8_15dir); + dir_g_in_bits |= 0x0000FF00; + dir_g_out_bits &= ~0x0000FF00; + } + if ((arg & 0x00FF0000) == 0x00FF0000) { + genconfig_shadow &= ~IO_MASK(R_GEN_CONFIG, g16_23dir); + dir_g_in_bits |= 0x00FF0000; + dir_g_out_bits &= ~0x00FF0000; + } + if (arg & (1<<24)) { + genconfig_shadow &= ~IO_MASK(R_GEN_CONFIG, g24dir); + dir_g_in_bits |= (1<<24); + dir_g_out_bits &= ~(1<<24); + } + D(printk(KERN_DEBUG "gpio: SETINPUT on port G set " + "genconfig to 0x%08lX " + "in_bits: 0x%08lX " + "out_bits: 0x%08lX\n", + (unsigned long)genconfig_shadow, + dir_g_in_bits, dir_g_out_bits)); + *R_GEN_CONFIG = genconfig_shadow; + /* Must be a >120 ns delay before writing this again */ + + } + return dir_g_in_bits; +} /* setget_input */ + +unsigned long inline setget_output(struct gpio_private *priv, unsigned long arg) +{ + if (USE_PORTS(priv)) { + *priv->dir = *priv->dir_shadow |= + ((unsigned char)arg & priv->changeable_dir); + return *priv->dir_shadow; + } + if (priv->minor != GPIO_MINOR_G) + return 0; + + /* We must fiddle with R_GEN_CONFIG to change dir */ + if (((arg & dir_g_out_bits) != arg) && + (arg & changeable_dir_g)) { + /* Set bits in genconfig to set to output */ + if (arg & (1<<0)) { + genconfig_shadow |= IO_MASK(R_GEN_CONFIG, g0dir); + dir_g_out_bits |= (1<<0); + dir_g_in_bits &= ~(1<<0); + } + if ((arg & 0x0000FF00) == 0x0000FF00) { + genconfig_shadow |= IO_MASK(R_GEN_CONFIG, g8_15dir); + dir_g_out_bits |= 0x0000FF00; + dir_g_in_bits &= ~0x0000FF00; + } + if ((arg & 0x00FF0000) == 0x00FF0000) { + genconfig_shadow |= IO_MASK(R_GEN_CONFIG, g16_23dir); + dir_g_out_bits |= 0x00FF0000; + dir_g_in_bits &= ~0x00FF0000; + } + if (arg & (1<<24)) { + genconfig_shadow |= IO_MASK(R_GEN_CONFIG, g24dir); + dir_g_out_bits |= (1<<24); + dir_g_in_bits &= ~(1<<24); + } + D(printk(KERN_INFO "gpio: SETOUTPUT on port G set " + "genconfig to 0x%08lX " + "in_bits: 0x%08lX " + "out_bits: 0x%08lX\n", + (unsigned long)genconfig_shadow, + dir_g_in_bits, dir_g_out_bits)); + *R_GEN_CONFIG = genconfig_shadow; + /* Must be a >120 ns delay before writing this again */ + } + return dir_g_out_bits & 0x7FFFFFFF; +} /* setget_output */ + +static int +gpio_leds_ioctl(unsigned int cmd, unsigned long arg); + +static long gpio_ioctl(struct file *file, unsigned int cmd, unsigned long arg) +{ + unsigned long flags; + unsigned long val; + int ret = 0; + + struct gpio_private *priv = file->private_data; + if (_IOC_TYPE(cmd) != ETRAXGPIO_IOCTYPE) + return -EINVAL; + + switch (_IOC_NR(cmd)) { + case IO_READBITS: /* Use IO_READ_INBITS and IO_READ_OUTBITS instead */ + // read the port + spin_lock_irqsave(&gpio_lock, flags); + if (USE_PORTS(priv)) { + ret = *priv->port; + } else if (priv->minor == GPIO_MINOR_G) { + ret = (*R_PORT_G_DATA) & 0x7FFFFFFF; + } + spin_unlock_irqrestore(&gpio_lock, flags); + + break; + case IO_SETBITS: + // set changeable bits with a 1 in arg + spin_lock_irqsave(&gpio_lock, flags); + + if (USE_PORTS(priv)) { + *priv->port = *priv->shadow |= + ((unsigned char)arg & priv->changeable_bits); + } else if (priv->minor == GPIO_MINOR_G) { + *R_PORT_G_DATA = port_g_data_shadow |= (arg & dir_g_out_bits); + } + spin_unlock_irqrestore(&gpio_lock, flags); + + break; + case IO_CLRBITS: + // clear changeable bits with a 1 in arg + spin_lock_irqsave(&gpio_lock, flags); + if (USE_PORTS(priv)) { + *priv->port = *priv->shadow &= + ~((unsigned char)arg & priv->changeable_bits); + } else if (priv->minor == GPIO_MINOR_G) { + *R_PORT_G_DATA = port_g_data_shadow &= ~((unsigned long)arg & dir_g_out_bits); + } + spin_unlock_irqrestore(&gpio_lock, flags); + break; + case IO_HIGHALARM: + // set alarm when bits with 1 in arg go high + spin_lock_irqsave(&gpio_lock, flags); + priv->highalarm |= arg; + gpio_some_alarms = 1; + spin_unlock_irqrestore(&gpio_lock, flags); + break; + case IO_LOWALARM: + // set alarm when bits with 1 in arg go low + spin_lock_irqsave(&gpio_lock, flags); + priv->lowalarm |= arg; + gpio_some_alarms = 1; + spin_unlock_irqrestore(&gpio_lock, flags); + break; + case IO_CLRALARM: + /* clear alarm for bits with 1 in arg */ + spin_lock_irqsave(&gpio_lock, flags); + priv->highalarm &= ~arg; + priv->lowalarm &= ~arg; + { + /* Must update gpio_some_alarms */ + struct gpio_private *p = alarmlist; + int some_alarms; + p = alarmlist; + some_alarms = 0; + while (p) { + if (p->highalarm | p->lowalarm) { + some_alarms = 1; + break; + } + p = p->next; + } + gpio_some_alarms = some_alarms; + } + spin_unlock_irqrestore(&gpio_lock, flags); + break; + case IO_READDIR: /* Use IO_SETGET_INPUT/OUTPUT instead! */ + /* Read direction 0=input 1=output */ + spin_lock_irqsave(&gpio_lock, flags); + if (USE_PORTS(priv)) { + ret = *priv->dir_shadow; + } else if (priv->minor == GPIO_MINOR_G) { + /* Note: Some bits are both in and out, + * Those that are dual is set here as well. + */ + ret = (dir_g_shadow | dir_g_out_bits) & 0x7FFFFFFF; + } + spin_unlock_irqrestore(&gpio_lock, flags); + break; + case IO_SETINPUT: /* Use IO_SETGET_INPUT instead! */ + /* Set direction 0=unchanged 1=input, + * return mask with 1=input + */ + spin_lock_irqsave(&gpio_lock, flags); + ret = setget_input(priv, arg) & 0x7FFFFFFF; + spin_unlock_irqrestore(&gpio_lock, flags); + break; + case IO_SETOUTPUT: /* Use IO_SETGET_OUTPUT instead! */ + /* Set direction 0=unchanged 1=output, + * return mask with 1=output + */ + spin_lock_irqsave(&gpio_lock, flags); + ret = setget_output(priv, arg) & 0x7FFFFFFF; + spin_unlock_irqrestore(&gpio_lock, flags); + break; + case IO_SHUTDOWN: + spin_lock_irqsave(&gpio_lock, flags); + SOFT_SHUTDOWN(); + spin_unlock_irqrestore(&gpio_lock, flags); + break; + case IO_GET_PWR_BT: + spin_lock_irqsave(&gpio_lock, flags); +#if defined (CONFIG_ETRAX_SOFT_SHUTDOWN) + ret = (*R_PORT_G_DATA & ( 1 << CONFIG_ETRAX_POWERBUTTON_BIT)); +#else + ret = 0; +#endif + spin_unlock_irqrestore(&gpio_lock, flags); + break; + case IO_CFG_WRITE_MODE: + spin_lock_irqsave(&gpio_lock, flags); + priv->clk_mask = arg & 0xFF; + priv->data_mask = (arg >> 8) & 0xFF; + priv->write_msb = (arg >> 16) & 0x01; + /* Check if we're allowed to change the bits and + * the direction is correct + */ + if (!((priv->clk_mask & priv->changeable_bits) && + (priv->data_mask & priv->changeable_bits) && + (priv->clk_mask & *priv->dir_shadow) && + (priv->data_mask & *priv->dir_shadow))) + { + priv->clk_mask = 0; + priv->data_mask = 0; + ret = -EPERM; + } + spin_unlock_irqrestore(&gpio_lock, flags); + break; + case IO_READ_INBITS: + /* *arg is result of reading the input pins */ + spin_lock_irqsave(&gpio_lock, flags); + if (USE_PORTS(priv)) { + val = *priv->port; + } else if (priv->minor == GPIO_MINOR_G) { + val = *R_PORT_G_DATA; + } + spin_unlock_irqrestore(&gpio_lock, flags); + if (copy_to_user((void __user *)arg, &val, sizeof(val))) + ret = -EFAULT; + break; + case IO_READ_OUTBITS: + /* *arg is result of reading the output shadow */ + spin_lock_irqsave(&gpio_lock, flags); + if (USE_PORTS(priv)) { + val = *priv->shadow; + } else if (priv->minor == GPIO_MINOR_G) { + val = port_g_data_shadow; + } + spin_unlock_irqrestore(&gpio_lock, flags); + if (copy_to_user((void __user *)arg, &val, sizeof(val))) + ret = -EFAULT; + break; + case IO_SETGET_INPUT: + /* bits set in *arg is set to input, + * *arg updated with current input pins. + */ + if (copy_from_user(&val, (void __user *)arg, sizeof(val))) + { + ret = -EFAULT; + break; + } + spin_lock_irqsave(&gpio_lock, flags); + val = setget_input(priv, val); + spin_unlock_irqrestore(&gpio_lock, flags); + if (copy_to_user((void __user *)arg, &val, sizeof(val))) + ret = -EFAULT; + break; + case IO_SETGET_OUTPUT: + /* bits set in *arg is set to output, + * *arg updated with current output pins. + */ + if (copy_from_user(&val, (void __user *)arg, sizeof(val))) { + ret = -EFAULT; + break; + } + spin_lock_irqsave(&gpio_lock, flags); + val = setget_output(priv, val); + spin_unlock_irqrestore(&gpio_lock, flags); + if (copy_to_user((void __user *)arg, &val, sizeof(val))) + ret = -EFAULT; + break; + default: + spin_lock_irqsave(&gpio_lock, flags); + if (priv->minor == GPIO_MINOR_LEDS) + ret = gpio_leds_ioctl(cmd, arg); + else + ret = -EINVAL; + spin_unlock_irqrestore(&gpio_lock, flags); + } /* switch */ + + return ret; +} + +static int +gpio_leds_ioctl(unsigned int cmd, unsigned long arg) +{ + unsigned char green; + unsigned char red; + + switch (_IOC_NR(cmd)) { + case IO_LEDACTIVE_SET: + green = ((unsigned char)arg) & 1; + red = (((unsigned char)arg) >> 1) & 1; + CRIS_LED_ACTIVE_SET_G(green); + CRIS_LED_ACTIVE_SET_R(red); + break; + + case IO_LED_SETBIT: + CRIS_LED_BIT_SET(arg); + break; + + case IO_LED_CLRBIT: + CRIS_LED_BIT_CLR(arg); + break; + + default: + return -EINVAL; + } /* switch */ + + return 0; +} + +static const struct file_operations gpio_fops = { + .owner = THIS_MODULE, + .poll = gpio_poll, + .unlocked_ioctl = gpio_ioctl, + .write = gpio_write, + .open = gpio_open, + .release = gpio_release, + .llseek = noop_llseek, +}; + +static void ioif_watcher(const unsigned int gpio_in_available, + const unsigned int gpio_out_available, + const unsigned char pa_available, + const unsigned char pb_available) +{ + unsigned long int flags; + + D(printk(KERN_DEBUG "gpio.c: ioif_watcher called\n")); + D(printk(KERN_DEBUG "gpio.c: G in: 0x%08x G out: 0x%08x " + "PA: 0x%02x PB: 0x%02x\n", + gpio_in_available, gpio_out_available, + pa_available, pb_available)); + + spin_lock_irqsave(&gpio_lock, flags); + + dir_g_in_bits = gpio_in_available; + dir_g_out_bits = gpio_out_available; + + /* Initialise the dir_g_shadow etc. depending on genconfig */ + /* 0=input 1=output */ + if (genconfig_shadow & IO_STATE(R_GEN_CONFIG, g0dir, out)) + dir_g_shadow |= (1 << 0); + if (genconfig_shadow & IO_STATE(R_GEN_CONFIG, g8_15dir, out)) + dir_g_shadow |= 0x0000FF00; + if (genconfig_shadow & IO_STATE(R_GEN_CONFIG, g16_23dir, out)) + dir_g_shadow |= 0x00FF0000; + if (genconfig_shadow & IO_STATE(R_GEN_CONFIG, g24dir, out)) + dir_g_shadow |= (1 << 24); + + changeable_dir_g = changeable_dir_g_mask; + changeable_dir_g &= dir_g_out_bits; + changeable_dir_g &= dir_g_in_bits; + + /* Correct the bits that can change direction */ + dir_g_out_bits &= ~changeable_dir_g; + dir_g_out_bits |= dir_g_shadow; + dir_g_in_bits &= ~changeable_dir_g; + dir_g_in_bits |= (~dir_g_shadow & changeable_dir_g); + + spin_unlock_irqrestore(&gpio_lock, flags); + + printk(KERN_INFO "GPIO port G: in_bits: 0x%08lX out_bits: 0x%08lX " + "val: %08lX\n", + dir_g_in_bits, dir_g_out_bits, (unsigned long)*R_PORT_G_DATA); + printk(KERN_INFO "GPIO port G: dir: %08lX changeable: %08lX\n", + dir_g_shadow, changeable_dir_g); +} + +/* main driver initialization routine, called from mem.c */ + +static int __init gpio_init(void) +{ + int res; +#if defined (CONFIG_ETRAX_CSP0_LEDS) + int i; +#endif + + res = register_chrdev(GPIO_MAJOR, gpio_name, &gpio_fops); + if (res < 0) { + printk(KERN_ERR "gpio: couldn't get a major number.\n"); + return res; + } + + /* Clear all leds */ +#if defined (CONFIG_ETRAX_CSP0_LEDS) || defined (CONFIG_ETRAX_PA_LEDS) || defined (CONFIG_ETRAX_PB_LEDS) + CRIS_LED_NETWORK_SET(0); + CRIS_LED_ACTIVE_SET(0); + CRIS_LED_DISK_READ(0); + CRIS_LED_DISK_WRITE(0); + +#if defined (CONFIG_ETRAX_CSP0_LEDS) + for (i = 0; i < 32; i++) + CRIS_LED_BIT_SET(i); +#endif + +#endif + /* The I/O interface allocation watcher will be called when + * registering it. */ + if (cris_io_interface_register_watcher(ioif_watcher)){ + printk(KERN_WARNING "gpio_init: Failed to install IO " + "if allocator watcher\n"); + } + + printk(KERN_INFO "ETRAX 100LX GPIO driver v2.5, (c) 2001-2008 " + "Axis Communications AB\n"); + /* We call etrax_gpio_wake_up_check() from timer interrupt and + * from default_idle() in kernel/process.c + * The check in default_idle() reduces latency from ~15 ms to ~6 ms + * in some tests. + */ + res = request_irq(TIMER0_IRQ_NBR, gpio_poll_timer_interrupt, + IRQF_SHARED, "gpio poll", gpio_name); + if (res) { + printk(KERN_CRIT "err: timer0 irq for gpio\n"); + return res; + } + res = request_irq(PA_IRQ_NBR, gpio_interrupt, + IRQF_SHARED, "gpio PA", gpio_name); + if (res) + printk(KERN_CRIT "err: PA irq for gpio\n"); + + return res; +} + +/* this makes sure that gpio_init is called during kernel boot */ +module_init(gpio_init); + |