summaryrefslogtreecommitdiffstats
path: root/kernel/arch/blackfin/mach-common/pm.c
diff options
context:
space:
mode:
Diffstat (limited to 'kernel/arch/blackfin/mach-common/pm.c')
-rw-r--r--kernel/arch/blackfin/mach-common/pm.c301
1 files changed, 301 insertions, 0 deletions
diff --git a/kernel/arch/blackfin/mach-common/pm.c b/kernel/arch/blackfin/mach-common/pm.c
new file mode 100644
index 000000000..a66d979ec
--- /dev/null
+++ b/kernel/arch/blackfin/mach-common/pm.c
@@ -0,0 +1,301 @@
+/*
+ * Blackfin power management
+ *
+ * Copyright 2006-2009 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2
+ * based on arm/mach-omap/pm.c
+ * Copyright 2001, Cliff Brake <cbrake@accelent.com> and others
+ */
+
+#include <linux/suspend.h>
+#include <linux/sched.h>
+#include <linux/proc_fs.h>
+#include <linux/slab.h>
+#include <linux/io.h>
+#include <linux/irq.h>
+#include <linux/delay.h>
+
+#include <asm/cplb.h>
+#include <asm/gpio.h>
+#include <asm/dma.h>
+#include <asm/dpmc.h>
+#include <asm/pm.h>
+
+#ifdef CONFIG_BF60x
+struct bfin_cpu_pm_fns *bfin_cpu_pm;
+#endif
+
+void bfin_pm_suspend_standby_enter(void)
+{
+#if !BFIN_GPIO_PINT
+ bfin_pm_standby_setup();
+#endif
+
+#ifdef CONFIG_BF60x
+ bfin_cpu_pm->enter(PM_SUSPEND_STANDBY);
+#else
+# ifdef CONFIG_PM_BFIN_SLEEP_DEEPER
+ sleep_deeper(bfin_sic_iwr[0], bfin_sic_iwr[1], bfin_sic_iwr[2]);
+# else
+ sleep_mode(bfin_sic_iwr[0], bfin_sic_iwr[1], bfin_sic_iwr[2]);
+# endif
+#endif
+
+#if !BFIN_GPIO_PINT
+ bfin_pm_standby_restore();
+#endif
+
+#ifndef CONFIG_BF60x
+#ifdef SIC_IWR0
+ bfin_write_SIC_IWR0(IWR_DISABLE_ALL);
+# ifdef SIC_IWR1
+ /* BF52x system reset does not properly reset SIC_IWR1 which
+ * will screw up the bootrom as it relies on MDMA0/1 waking it
+ * up from IDLE instructions. See this report for more info:
+ * http://blackfin.uclinux.org/gf/tracker/4323
+ */
+ if (ANOMALY_05000435)
+ bfin_write_SIC_IWR1(IWR_ENABLE(10) | IWR_ENABLE(11));
+ else
+ bfin_write_SIC_IWR1(IWR_DISABLE_ALL);
+# endif
+# ifdef SIC_IWR2
+ bfin_write_SIC_IWR2(IWR_DISABLE_ALL);
+# endif
+#else
+ bfin_write_SIC_IWR(IWR_DISABLE_ALL);
+#endif
+
+#endif
+}
+
+int bf53x_suspend_l1_mem(unsigned char *memptr)
+{
+ dma_memcpy_nocache(memptr, (const void *) L1_CODE_START,
+ L1_CODE_LENGTH);
+ dma_memcpy_nocache(memptr + L1_CODE_LENGTH,
+ (const void *) L1_DATA_A_START, L1_DATA_A_LENGTH);
+ dma_memcpy_nocache(memptr + L1_CODE_LENGTH + L1_DATA_A_LENGTH,
+ (const void *) L1_DATA_B_START, L1_DATA_B_LENGTH);
+ memcpy(memptr + L1_CODE_LENGTH + L1_DATA_A_LENGTH +
+ L1_DATA_B_LENGTH, (const void *) L1_SCRATCH_START,
+ L1_SCRATCH_LENGTH);
+
+ return 0;
+}
+
+int bf53x_resume_l1_mem(unsigned char *memptr)
+{
+ dma_memcpy_nocache((void *) L1_CODE_START, memptr, L1_CODE_LENGTH);
+ dma_memcpy_nocache((void *) L1_DATA_A_START, memptr + L1_CODE_LENGTH,
+ L1_DATA_A_LENGTH);
+ dma_memcpy_nocache((void *) L1_DATA_B_START, memptr + L1_CODE_LENGTH +
+ L1_DATA_A_LENGTH, L1_DATA_B_LENGTH);
+ memcpy((void *) L1_SCRATCH_START, memptr + L1_CODE_LENGTH +
+ L1_DATA_A_LENGTH + L1_DATA_B_LENGTH, L1_SCRATCH_LENGTH);
+
+ return 0;
+}
+
+#if defined(CONFIG_BFIN_EXTMEM_WRITEBACK) || defined(CONFIG_BFIN_L2_WRITEBACK)
+# ifdef CONFIG_BF60x
+__attribute__((l1_text))
+# endif
+static void flushinv_all_dcache(void)
+{
+ register u32 way, bank, subbank, set;
+ register u32 status, addr;
+ u32 dmem_ctl = bfin_read_DMEM_CONTROL();
+
+ for (bank = 0; bank < 2; ++bank) {
+ if (!(dmem_ctl & (1 << (DMC1_P - bank))))
+ continue;
+
+ for (way = 0; way < 2; ++way)
+ for (subbank = 0; subbank < 4; ++subbank)
+ for (set = 0; set < 64; ++set) {
+
+ bfin_write_DTEST_COMMAND(
+ way << 26 |
+ bank << 23 |
+ subbank << 16 |
+ set << 5
+ );
+ CSYNC();
+ status = bfin_read_DTEST_DATA0();
+
+ /* only worry about valid/dirty entries */
+ if ((status & 0x3) != 0x3)
+ continue;
+
+
+ /* construct the address using the tag */
+ addr = (status & 0xFFFFC800) | (subbank << 12) | (set << 5);
+
+ /* flush it */
+ __asm__ __volatile__("FLUSHINV[%0];" : : "a"(addr));
+ }
+ }
+}
+#endif
+
+int bfin_pm_suspend_mem_enter(void)
+{
+ int ret;
+#ifndef CONFIG_BF60x
+ int wakeup;
+#endif
+
+ unsigned char *memptr = kmalloc(L1_CODE_LENGTH + L1_DATA_A_LENGTH
+ + L1_DATA_B_LENGTH + L1_SCRATCH_LENGTH,
+ GFP_ATOMIC);
+
+ if (memptr == NULL) {
+ panic("bf53x_suspend_l1_mem malloc failed");
+ return -ENOMEM;
+ }
+
+#ifndef CONFIG_BF60x
+ wakeup = bfin_read_VR_CTL() & ~FREQ;
+ wakeup |= SCKELOW;
+
+#ifdef CONFIG_PM_BFIN_WAKE_PH6
+ wakeup |= PHYWE;
+#endif
+#ifdef CONFIG_PM_BFIN_WAKE_GP
+ wakeup |= GPWE;
+#endif
+#endif
+
+ ret = blackfin_dma_suspend();
+
+ if (ret) {
+ kfree(memptr);
+ return ret;
+ }
+
+#ifdef CONFIG_GPIO_ADI
+ bfin_gpio_pm_hibernate_suspend();
+#endif
+
+#if defined(CONFIG_BFIN_EXTMEM_WRITEBACK) || defined(CONFIG_BFIN_L2_WRITEBACK)
+ flushinv_all_dcache();
+ udelay(1);
+#endif
+ _disable_dcplb();
+ _disable_icplb();
+ bf53x_suspend_l1_mem(memptr);
+
+#ifndef CONFIG_BF60x
+ do_hibernate(wakeup | vr_wakeup); /* See you later! */
+#else
+ bfin_cpu_pm->enter(PM_SUSPEND_MEM);
+#endif
+
+ bf53x_resume_l1_mem(memptr);
+
+ _enable_icplb();
+ _enable_dcplb();
+
+#ifdef CONFIG_GPIO_ADI
+ bfin_gpio_pm_hibernate_restore();
+#endif
+ blackfin_dma_resume();
+
+ kfree(memptr);
+
+ return 0;
+}
+
+/*
+ * bfin_pm_valid - Tell the PM core that we only support the standby sleep
+ * state
+ * @state: suspend state we're checking.
+ *
+ */
+static int bfin_pm_valid(suspend_state_t state)
+{
+ return (state == PM_SUSPEND_STANDBY
+#if !(defined(BF533_FAMILY) || defined(CONFIG_BF561))
+ /*
+ * On BF533/2/1:
+ * If we enter Hibernate the SCKE Pin is driven Low,
+ * so that the SDRAM enters Self Refresh Mode.
+ * However when the reset sequence that follows hibernate
+ * state is executed, SCKE is driven High, taking the
+ * SDRAM out of Self Refresh.
+ *
+ * If you reconfigure and access the SDRAM "very quickly",
+ * you are likely to avoid errors, otherwise the SDRAM
+ * start losing its contents.
+ * An external HW workaround is possible using logic gates.
+ */
+ || state == PM_SUSPEND_MEM
+#endif
+ );
+}
+
+/*
+ * bfin_pm_enter - Actually enter a sleep state.
+ * @state: State we're entering.
+ *
+ */
+static int bfin_pm_enter(suspend_state_t state)
+{
+ switch (state) {
+ case PM_SUSPEND_STANDBY:
+ bfin_pm_suspend_standby_enter();
+ break;
+ case PM_SUSPEND_MEM:
+ bfin_pm_suspend_mem_enter();
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+#ifdef CONFIG_BFIN_PM_WAKEUP_TIME_BENCH
+void bfin_pm_end(void)
+{
+ u32 cycle, cycle2;
+ u64 usec64;
+ u32 usec;
+
+ __asm__ __volatile__ (
+ "1: %0 = CYCLES2\n"
+ "%1 = CYCLES\n"
+ "%2 = CYCLES2\n"
+ "CC = %2 == %0\n"
+ "if ! CC jump 1b\n"
+ : "=d,a" (cycle2), "=d,a" (cycle), "=d,a" (usec) : : "CC"
+ );
+
+ usec64 = ((u64)cycle2 << 32) + cycle;
+ do_div(usec64, get_cclk() / USEC_PER_SEC);
+ usec = usec64;
+ if (usec == 0)
+ usec = 1;
+
+ pr_info("PM: resume of kernel completes after %ld msec %03ld usec\n",
+ usec / USEC_PER_MSEC, usec % USEC_PER_MSEC);
+}
+#endif
+
+static const struct platform_suspend_ops bfin_pm_ops = {
+ .enter = bfin_pm_enter,
+ .valid = bfin_pm_valid,
+#ifdef CONFIG_BFIN_PM_WAKEUP_TIME_BENCH
+ .end = bfin_pm_end,
+#endif
+};
+
+static int __init bfin_pm_init(void)
+{
+ suspend_set_ops(&bfin_pm_ops);
+ return 0;
+}
+
+__initcall(bfin_pm_init);