diff options
Diffstat (limited to 'kernel/arch/blackfin/mach-common/head.S')
| -rw-r--r-- | kernel/arch/blackfin/mach-common/head.S | 229 |
1 files changed, 229 insertions, 0 deletions
diff --git a/kernel/arch/blackfin/mach-common/head.S b/kernel/arch/blackfin/mach-common/head.S new file mode 100644 index 000000000..31515f014 --- /dev/null +++ b/kernel/arch/blackfin/mach-common/head.S @@ -0,0 +1,229 @@ +/* + * Common Blackfin startup code + * + * Copyright 2004-2008 Analog Devices Inc. + * + * Licensed under the GPL-2 or later. + */ + +#include <linux/linkage.h> +#include <linux/init.h> +#include <asm/blackfin.h> +#include <asm/thread_info.h> +#include <asm/trace.h> +#include <asm/asm-offsets.h> + +__INIT + +ENTRY(__init_clear_bss) + r2 = r2 - r1; + cc = r2 == 0; + if cc jump .L_bss_done; + r2 >>= 2; + p1 = r1; + p2 = r2; + lsetup (1f, 1f) lc0 = p2; +1: [p1++] = r0; +.L_bss_done: + rts; +ENDPROC(__init_clear_bss) + +ENTRY(__start) + /* R0: argument of command line string, passed from uboot, save it */ + R7 = R0; + + /* Enable Cycle Counter and Nesting Of Interrupts */ +#ifdef CONFIG_BFIN_SCRATCH_REG_CYCLES + R0 = SYSCFG_SNEN; +#else + R0 = SYSCFG_SNEN | SYSCFG_CCEN; +#endif + SYSCFG = R0; + + /* Optimization register tricks: keep a base value in the + * reserved P registers so we use the load/store with an + * offset syntax. R0 = [P5 + <constant>]; + * P5 - core MMR base + * R6 - 0 + */ + r6 = 0; + p5.l = 0; + p5.h = hi(COREMMR_BASE); + + /* Zero out registers required by Blackfin ABI */ + + /* Disable circular buffers */ + L0 = r6; + L1 = r6; + L2 = r6; + L3 = r6; + + /* Disable hardware loops in case we were started by 'go' */ + LC0 = r6; + LC1 = r6; + + /* + * Clear ITEST_COMMAND and DTEST_COMMAND registers, + * Leaving these as non-zero can confuse the emulator + */ + [p5 + (DTEST_COMMAND - COREMMR_BASE)] = r6; + [p5 + (ITEST_COMMAND - COREMMR_BASE)] = r6; + CSYNC; + + trace_buffer_init(p0,r0); + + /* Turn off the icache */ + r1 = [p5 + (IMEM_CONTROL - COREMMR_BASE)]; + BITCLR (r1, ENICPLB_P); + [p5 + (IMEM_CONTROL - COREMMR_BASE)] = r1; + SSYNC; + + /* Turn off the dcache */ + r1 = [p5 + (DMEM_CONTROL - COREMMR_BASE)]; + BITCLR (r1, ENDCPLB_P); + [p5 + (DMEM_CONTROL - COREMMR_BASE)] = r1; + SSYNC; + + /* in case of double faults, save a few things */ + p1.l = _initial_pda; + p1.h = _initial_pda; + r4 = RETX; +#ifdef CONFIG_DEBUG_DOUBLEFAULT + /* Only save these if we are storing them, + * This happens here, since L1 gets clobbered + * below + */ + GET_PDA(p0, r0); + r0 = [p0 + PDA_DF_RETX]; + r1 = [p0 + PDA_DF_DCPLB]; + r2 = [p0 + PDA_DF_ICPLB]; + r3 = [p0 + PDA_DF_SEQSTAT]; + [p1 + PDA_INIT_DF_RETX] = r0; + [p1 + PDA_INIT_DF_DCPLB] = r1; + [p1 + PDA_INIT_DF_ICPLB] = r2; + [p1 + PDA_INIT_DF_SEQSTAT] = r3; +#endif + [p1 + PDA_INIT_RETX] = r4; + + /* Initialize stack pointer */ + sp.l = _init_thread_union + THREAD_SIZE; + sp.h = _init_thread_union + THREAD_SIZE; + fp = sp; + usp = sp; + +#ifdef CONFIG_EARLY_PRINTK + call _init_early_exception_vectors; + r0 = (EVT_IVHW | EVT_IRPTEN | EVT_EVX | EVT_NMI | EVT_RST | EVT_EMU); + sti r0; +#endif + + r0 = r6; + /* Zero out all of the fun bss regions */ +#if L1_DATA_A_LENGTH > 0 + r1.l = __sbss_l1; + r1.h = __sbss_l1; + r2.l = __ebss_l1; + r2.h = __ebss_l1; + call __init_clear_bss +#endif +#if L1_DATA_B_LENGTH > 0 + r1.l = __sbss_b_l1; + r1.h = __sbss_b_l1; + r2.l = __ebss_b_l1; + r2.h = __ebss_b_l1; + call __init_clear_bss +#endif +#if L2_LENGTH > 0 + r1.l = __sbss_l2; + r1.h = __sbss_l2; + r2.l = __ebss_l2; + r2.h = __ebss_l2; + call __init_clear_bss +#endif + r1.l = ___bss_start; + r1.h = ___bss_start; + r2.l = ___bss_stop; + r2.h = ___bss_stop; + call __init_clear_bss + + /* Put The Code for PLL Programming and SDRAM Programming in L1 ISRAM */ + call _bfin_relocate_l1_mem; + +#ifdef CONFIG_ROMKERNEL + call _bfin_relocate_xip_data; +#endif + +#ifdef CONFIG_BFIN_KERNEL_CLOCK + /* Only use on-chip scratch space for stack when absolutely required + * to avoid Anomaly 05000227 ... we know the init_clocks() func only + * uses L1 text and stack space and no other memory region. + */ +# define KERNEL_CLOCK_STACK (L1_SCRATCH_START + L1_SCRATCH_LENGTH - 12) + sp.l = lo(KERNEL_CLOCK_STACK); + sp.h = hi(KERNEL_CLOCK_STACK); + call _init_clocks; + sp = usp; /* usp hasn't been touched, so restore from there */ +#endif + + /* This section keeps the processor in supervisor mode + * during kernel boot. Switches to user mode at end of boot. + * See page 3-9 of Hardware Reference manual for documentation. + */ + + /* EVT15 = _real_start */ + + p1.l = _real_start; + p1.h = _real_start; + [p5 + (EVT15 - COREMMR_BASE)] = p1; + csync; + +#ifdef CONFIG_EARLY_PRINTK + r0 = (EVT_IVG15 | EVT_IVHW | EVT_IRPTEN | EVT_EVX | EVT_NMI | EVT_RST | EVT_EMU) (z); +#else + r0 = EVT_IVG15 (z); +#endif + sti r0; + + raise 15; +#ifdef CONFIG_EARLY_PRINTK + p0.l = _early_trap; + p0.h = _early_trap; +#else + p0.l = .LWAIT_HERE; + p0.h = .LWAIT_HERE; +#endif + reti = p0; +#if ANOMALY_05000281 + nop; nop; nop; +#endif + rti; + +.LWAIT_HERE: + jump .LWAIT_HERE; +ENDPROC(__start) + +/* A little BF561 glue ... */ +#ifndef WDOG_CTL +# define WDOG_CTL WDOGA_CTL +#endif + +ENTRY(_real_start) + /* Enable nested interrupts */ + [--sp] = reti; + /* watchdog off for now */ + p0.l = lo(WDOG_CTL); + p0.h = hi(WDOG_CTL); + r0 = 0xAD6(z); + w[p0] = r0; + ssync; + /* Pass the u-boot arguments to the global value command line */ + R0 = R7; + call _cmdline_init; + + sp += -12 + 4; /* +4 is for reti loading above */ + call _init_pda + sp += 12; + jump.l _start_kernel; +ENDPROC(_real_start) + +__FINIT |