diff options
Diffstat (limited to 'kernel/arch/blackfin/mach-bf518/Kconfig')
| -rw-r--r-- | kernel/arch/blackfin/mach-bf518/Kconfig | 319 |
1 files changed, 319 insertions, 0 deletions
diff --git a/kernel/arch/blackfin/mach-bf518/Kconfig b/kernel/arch/blackfin/mach-bf518/Kconfig new file mode 100644 index 000000000..bde92a199 --- /dev/null +++ b/kernel/arch/blackfin/mach-bf518/Kconfig @@ -0,0 +1,319 @@ +config BF51x + def_bool y + depends on (BF512 || BF514 || BF516 || BF518) + +if (BF51x) + +source "arch/blackfin/mach-bf518/boards/Kconfig" + +menu "BF518 Specific Configuration" + +comment "Alternative Multiplexing Scheme" + +choice + prompt "PWM Channel Pins" + default BF518_PWM_ALL_PORTF + help + Select pins used for the PWM channels: + PWM_AH PWM_AL PWM_BH PWM_BL PWM_CH PWM_CL + + See the Hardware Reference Manual for more details. + +config BF518_PWM_ALL_PORTF + bool "PF1 - PF6" + help + PF{1,2,3,4,5,6} <-> PWM_{AH,AL,BH,BL,CH,CL} + +config BF518_PWM_PORTF_PORTG + bool "PF11 - PF14 / PG1 - PG2" + help + PF{11,12,13,14} <-> PWM_{AH,AL,BH,BL} + PG{1,2} <-> PWM_{CH,CL} + +endchoice + +choice + prompt "PWM Sync Pin" + default BF518_PWM_SYNC_PF7 + help + Select the pin used for PWM_SYNC. + + See the Hardware Reference Manual for more details. + +config BF518_PWM_SYNC_PF7 + bool "PF7" +config BF518_PWM_SYNC_PF15 + bool "PF15" +endchoice + +choice + prompt "PWM Trip B Pin" + default BF518_PWM_TRIPB_PG10 + help + Select the pin used for PWM_TRIPB. + + See the Hardware Reference Manual for more details. + +config BF518_PWM_TRIPB_PG10 + bool "PG10" +config BF518_PWM_TRIPB_PG14 + bool "PG14" +endchoice + +choice + prompt "PPI / Timer Pins" + default BF518_PPI_TMR_PG5 + help + Select pins used for PPI/Timer: + PPICLK PPIFS1 PPIFS2 + TMRCLK TMR0 TMR1 + + See the Hardware Reference Manual for more details. + +config BF518_PPI_TMR_PG5 + bool "PG5 - PG7" + help + PG{5,6,7} <-> {PPICLK/TMRCLK,TMR0/PPIFS1,TMR1/PPIFS2} + +config BF518_PPI_TMR_PG12 + bool "PG12 - PG14" + help + PG{12,13,14} <-> {PPICLK/TMRCLK,TMR0/PPIFS1,TMR1/PPIFS2} + +endchoice + +comment "Hysteresis/Schmitt Trigger Control" +config BFIN_HYSTERESIS_CONTROL + bool "Enable Hysteresis Control" + help + The ADSP-BF51x allows to control input hysteresis for Port F, + Port G and Port H and other processor signal inputs. + The Schmitt trigger enables can be set only for pin groups. + Saying Y will overwrite the default reset or boot loader + initialization. + +menu "PORT F" + depends on BFIN_HYSTERESIS_CONTROL +config GPIO_HYST_PORTF_0_7 + bool "Enable Hysteresis on PORTF {0...7}" +config GPIO_HYST_PORTF_8_9 + bool "Enable Hysteresis on PORTF {8, 9}" +config GPIO_HYST_PORTF_10 + bool "Enable Hysteresis on PORTF 10" +config GPIO_HYST_PORTF_11 + bool "Enable Hysteresis on PORTF 11" +config GPIO_HYST_PORTF_12_13 + bool "Enable Hysteresis on PORTF {12, 13}" +config GPIO_HYST_PORTF_14_15 + bool "Enable Hysteresis on PORTF {14, 15}" +endmenu + +menu "PORT G" + depends on BFIN_HYSTERESIS_CONTROL +config GPIO_HYST_PORTG_0 + bool "Enable Hysteresis on PORTG 0" +config GPIO_HYST_PORTG_1_4 + bool "Enable Hysteresis on PORTG {1...4}" +config GPIO_HYST_PORTG_5_6 + bool "Enable Hysteresis on PORTG {5, 6}" +config GPIO_HYST_PORTG_7_8 + bool "Enable Hysteresis on PORTG {7, 8}" +config GPIO_HYST_PORTG_9 + bool "Enable Hysteresis on PORTG 9" +config GPIO_HYST_PORTG_10 + bool "Enable Hysteresis on PORTG 10" +config GPIO_HYST_PORTG_11_13 + bool "Enable Hysteresis on PORTG {11...13}" +config GPIO_HYST_PORTG_14_15 + bool "Enable Hysteresis on PORTG {14, 15}" +endmenu + +menu "PORT H" + depends on BFIN_HYSTERESIS_CONTROL +config GPIO_HYST_PORTH_0_7 + bool "Enable Hysteresis on PORTH {0...7}" + +endmenu + +menu "None-GPIO" + depends on BFIN_HYSTERESIS_CONTROL +config NONEGPIO_HYST_NMI_RST_BMODE + bool "Enable Hysteresis on {NMI, RESET, BMODE}" +config NONEGPIO_HYST_JTAG + bool "Enable Hysteresis on JTAG" +endmenu + +comment "Interrupt Priority Assignment" +menu "Priority" + +config IRQ_PLL_WAKEUP + int "IRQ_PLL_WAKEUP" + default 7 +config IRQ_DMA0_ERROR + int "IRQ_DMA0_ERROR" + default 7 +config IRQ_DMAR0_BLK + int "IRQ_DMAR0_BLK" + default 7 +config IRQ_DMAR1_BLK + int "IRQ_DMAR1_BLK" + default 7 +config IRQ_DMAR0_OVR + int "IRQ_DMAR0_OVR" + default 7 +config IRQ_DMAR1_OVR + int "IRQ_DMAR1_OVR" + default 7 +config IRQ_PPI_ERROR + int "IRQ_PPI_ERROR" + default 7 +config IRQ_MAC_ERROR + int "IRQ_MAC_ERROR" + default 7 +config IRQ_SPORT0_ERROR + int "IRQ_SPORT0_ERROR" + default 7 +config IRQ_SPORT1_ERROR + int "IRQ_SPORT1_ERROR" + default 7 +config IRQ_PTP_ERROR + int "IRQ_PTP_ERROR" + default 7 +config IRQ_UART0_ERROR + int "IRQ_UART0_ERROR" + default 7 +config IRQ_UART1_ERROR + int "IRQ_UART1_ERROR" + default 7 +config IRQ_RTC + int "IRQ_RTC" + default 8 +config IRQ_PPI + int "IRQ_PPI" + default 8 +config IRQ_SPORT0_RX + int "IRQ_SPORT0_RX" + default 9 +config IRQ_SPORT0_TX + int "IRQ_SPORT0_TX" + default 9 +config IRQ_SPORT1_RX + int "IRQ_SPORT1_RX" + default 9 +config IRQ_SPORT1_TX + int "IRQ_SPORT1_TX" + default 9 +config IRQ_TWI + int "IRQ_TWI" + default 10 +config IRQ_SPI0 + int "IRQ_SPI" + default 10 +config IRQ_UART0_RX + int "IRQ_UART0_RX" + default 10 +config IRQ_UART0_TX + int "IRQ_UART0_TX" + default 10 +config IRQ_UART1_RX + int "IRQ_UART1_RX" + default 10 +config IRQ_UART1_TX + int "IRQ_UART1_TX" + default 10 +config IRQ_OPTSEC + int "IRQ_OPTSEC" + default 11 +config IRQ_CNT + int "IRQ_CNT" + default 11 +config IRQ_MAC_RX + int "IRQ_MAC_RX" + default 11 +config IRQ_PORTH_INTA + int "IRQ_PORTH_INTA" + default 11 +config IRQ_MAC_TX + int "IRQ_MAC_TX/NFC" + default 11 +config IRQ_PORTH_INTB + int "IRQ_PORTH_INTB" + default 11 +config IRQ_TIMER0 + int "IRQ_TIMER0" + default 7 if TICKSOURCE_GPTMR0 + default 8 +config IRQ_TIMER1 + int "IRQ_TIMER1" + default 12 +config IRQ_TIMER2 + int "IRQ_TIMER2" + default 12 +config IRQ_TIMER3 + int "IRQ_TIMER3" + default 12 +config IRQ_TIMER4 + int "IRQ_TIMER4" + default 12 +config IRQ_TIMER5 + int "IRQ_TIMER5" + default 12 +config IRQ_TIMER6 + int "IRQ_TIMER6" + default 12 +config IRQ_TIMER7 + int "IRQ_TIMER7" + default 12 +config IRQ_PORTG_INTA + int "IRQ_PORTG_INTA" + default 12 +config IRQ_PORTG_INTB + int "IRQ_PORTG_INTB" + default 12 +config IRQ_MEM_DMA0 + int "IRQ_MEM_DMA0" + default 13 +config IRQ_MEM_DMA1 + int "IRQ_MEM_DMA1" + default 13 +config IRQ_WATCH + int "IRQ_WATCH" + default 13 +config IRQ_PORTF_INTA + int "IRQ_PORTF_INTA" + default 13 +config IRQ_PORTF_INTB + int "IRQ_PORTF_INTB" + default 13 +config IRQ_SPI0_ERROR + int "IRQ_SPI0_ERROR" + default 7 +config IRQ_SPI1_ERROR + int "IRQ_SPI1_ERROR" + default 7 +config IRQ_RSI_INT0 + int "IRQ_RSI_INT0" + default 7 +config IRQ_RSI_INT1 + int "IRQ_RSI_INT1" + default 7 +config IRQ_PWM_TRIP + int "IRQ_PWM_TRIP" + default 10 +config IRQ_PWM_SYNC + int "IRQ_PWM_SYNC" + default 10 +config IRQ_PTP_STAT + int "IRQ_PTP_STAT" + default 10 + + help + Enter the priority numbers between 7-13 ONLY. Others are Reserved. + This applies to all the above. It is not recommended to assign the + highest priority number 7 to UART or any other device. + +endmenu + +endmenu + +endif |