diff options
Diffstat (limited to 'kernel/arch/arm64/boot/dts/arm')
| -rw-r--r-- | kernel/arch/arm64/boot/dts/arm/Makefile | 3 | ||||
| -rw-r--r-- | kernel/arch/arm64/boot/dts/arm/juno-base.dtsi | 213 | ||||
| -rw-r--r-- | kernel/arch/arm64/boot/dts/arm/juno-clocks.dtsi | 4 | ||||
| -rw-r--r-- | kernel/arch/arm64/boot/dts/arm/juno-motherboard.dtsi | 146 | ||||
| -rw-r--r-- | kernel/arch/arm64/boot/dts/arm/juno-r1.dts | 172 | ||||
| -rw-r--r-- | kernel/arch/arm64/boot/dts/arm/juno.dts | 177 | ||||
| -rw-r--r-- | kernel/arch/arm64/boot/dts/arm/rtsm_ve-motherboard.dtsi | 2 | ||||
| -rw-r--r-- | kernel/arch/arm64/boot/dts/arm/vexpress-v2f-1xv7-ca53x2.dts | 191 | ||||
| l--------- | kernel/arch/arm64/boot/dts/arm/vexpress-v2m-rs1.dtsi | 1 |
9 files changed, 772 insertions, 137 deletions
diff --git a/kernel/arch/arm64/boot/dts/arm/Makefile b/kernel/arch/arm64/boot/dts/arm/Makefile index 301a0dada..bb3c07209 100644 --- a/kernel/arch/arm64/boot/dts/arm/Makefile +++ b/kernel/arch/arm64/boot/dts/arm/Makefile @@ -1,6 +1,7 @@ dtb-$(CONFIG_ARCH_VEXPRESS) += foundation-v8.dtb -dtb-$(CONFIG_ARCH_VEXPRESS) += juno.dtb +dtb-$(CONFIG_ARCH_VEXPRESS) += juno.dtb juno-r1.dtb dtb-$(CONFIG_ARCH_VEXPRESS) += rtsm_ve-aemv8a.dtb +dtb-$(CONFIG_ARCH_VEXPRESS) += vexpress-v2f-1xv7-ca53x2.dtb always := $(dtb-y) subdir-y := $(dts-dirs) diff --git a/kernel/arch/arm64/boot/dts/arm/juno-base.dtsi b/kernel/arch/arm64/boot/dts/arm/juno-base.dtsi new file mode 100644 index 000000000..dd5158eb5 --- /dev/null +++ b/kernel/arch/arm64/boot/dts/arm/juno-base.dtsi @@ -0,0 +1,213 @@ + /* + * Devices shared by all Juno boards + */ + + memtimer: timer@2a810000 { + compatible = "arm,armv7-timer-mem"; + reg = <0x0 0x2a810000 0x0 0x10000>; + clock-frequency = <50000000>; + #address-cells = <2>; + #size-cells = <2>; + ranges; + status = "disabled"; + frame@2a830000 { + frame-number = <1>; + interrupts = <0 60 4>; + reg = <0x0 0x2a830000 0x0 0x10000>; + }; + }; + + mailbox: mhu@2b1f0000 { + compatible = "arm,mhu", "arm,primecell"; + reg = <0x0 0x2b1f0000 0x0 0x1000>; + interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "mhu_lpri_rx", + "mhu_hpri_rx"; + #mbox-cells = <1>; + clocks = <&soc_refclk100mhz>; + clock-names = "apb_pclk"; + }; + + gic: interrupt-controller@2c010000 { + compatible = "arm,gic-400", "arm,cortex-a15-gic"; + reg = <0x0 0x2c010000 0 0x1000>, + <0x0 0x2c02f000 0 0x2000>, + <0x0 0x2c04f000 0 0x2000>, + <0x0 0x2c06f000 0 0x2000>; + #address-cells = <2>; + #interrupt-cells = <3>; + #size-cells = <2>; + interrupt-controller; + interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_HIGH)>; + ranges = <0 0 0 0x2c1c0000 0 0x40000>; + v2m_0: v2m@0 { + compatible = "arm,gic-v2m-frame"; + msi-controller; + reg = <0 0 0 0x1000>; + }; + }; + + timer { + compatible = "arm,armv8-timer"; + interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_LOW)>; + }; + + sram: sram@2e000000 { + compatible = "arm,juno-sram-ns", "mmio-sram"; + reg = <0x0 0x2e000000 0x0 0x8000>; + + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x0 0x2e000000 0x8000>; + + cpu_scp_lpri: scp-shmem@0 { + compatible = "arm,juno-scp-shmem"; + reg = <0x0 0x200>; + }; + + cpu_scp_hpri: scp-shmem@200 { + compatible = "arm,juno-scp-shmem"; + reg = <0x200 0x200>; + }; + }; + + scpi { + compatible = "arm,scpi"; + mboxes = <&mailbox 1>; + shmem = <&cpu_scp_hpri>; + + clocks { + compatible = "arm,scpi-clocks"; + + scpi_dvfs: scpi_clocks@0 { + compatible = "arm,scpi-dvfs-clocks"; + #clock-cells = <1>; + clock-indices = <0>, <1>, <2>; + clock-output-names = "atlclk", "aplclk","gpuclk"; + }; + scpi_clk: scpi_clocks@3 { + compatible = "arm,scpi-variable-clocks"; + #clock-cells = <1>; + clock-indices = <3>, <4>; + clock-output-names = "pxlclk0", "pxlclk1"; + }; + }; + + scpi_sensors0: sensors { + compatible = "arm,scpi-sensors"; + #thermal-sensor-cells = <1>; + }; + }; + + /include/ "juno-clocks.dtsi" + + dma@7ff00000 { + compatible = "arm,pl330", "arm,primecell"; + reg = <0x0 0x7ff00000 0 0x1000>; + #dma-cells = <1>; + #dma-channels = <8>; + #dma-requests = <32>; + interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&soc_faxiclk>; + clock-names = "apb_pclk"; + }; + + soc_uart0: uart@7ff80000 { + compatible = "arm,pl011", "arm,primecell"; + reg = <0x0 0x7ff80000 0x0 0x1000>; + interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&soc_uartclk>, <&soc_refclk100mhz>; + clock-names = "uartclk", "apb_pclk"; + }; + + i2c@7ffa0000 { + compatible = "snps,designware-i2c"; + reg = <0x0 0x7ffa0000 0x0 0x1000>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>; + clock-frequency = <400000>; + i2c-sda-hold-time-ns = <500>; + clocks = <&soc_smc50mhz>; + + dvi0: dvi-transmitter@70 { + compatible = "nxp,tda998x"; + reg = <0x70>; + }; + + dvi1: dvi-transmitter@71 { + compatible = "nxp,tda998x"; + reg = <0x71>; + }; + }; + + ohci@7ffb0000 { + compatible = "generic-ohci"; + reg = <0x0 0x7ffb0000 0x0 0x10000>; + interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&soc_usb48mhz>; + }; + + ehci@7ffc0000 { + compatible = "generic-ehci"; + reg = <0x0 0x7ffc0000 0x0 0x10000>; + interrupts = <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&soc_usb48mhz>; + }; + + memory-controller@7ffd0000 { + compatible = "arm,pl354", "arm,primecell"; + reg = <0 0x7ffd0000 0 0x1000>; + interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&soc_smc50mhz>; + clock-names = "apb_pclk"; + }; + + memory@80000000 { + device_type = "memory"; + /* last 16MB of the first memory area is reserved for secure world use by firmware */ + reg = <0x00000000 0x80000000 0x0 0x7f000000>, + <0x00000008 0x80000000 0x1 0x80000000>; + }; + + smb { + compatible = "simple-bus"; + #address-cells = <2>; + #size-cells = <1>; + ranges = <0 0 0 0x08000000 0x04000000>, + <1 0 0 0x14000000 0x04000000>, + <2 0 0 0x18000000 0x04000000>, + <3 0 0 0x1c000000 0x04000000>, + <4 0 0 0x0c000000 0x04000000>, + <5 0 0 0x10000000 0x04000000>; + + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 15>; + interrupt-map = <0 0 0 &gic 0 0 0 68 IRQ_TYPE_LEVEL_HIGH>, + <0 0 1 &gic 0 0 0 69 IRQ_TYPE_LEVEL_HIGH>, + <0 0 2 &gic 0 0 0 70 IRQ_TYPE_LEVEL_HIGH>, + <0 0 3 &gic 0 0 0 160 IRQ_TYPE_LEVEL_HIGH>, + <0 0 4 &gic 0 0 0 161 IRQ_TYPE_LEVEL_HIGH>, + <0 0 5 &gic 0 0 0 162 IRQ_TYPE_LEVEL_HIGH>, + <0 0 6 &gic 0 0 0 163 IRQ_TYPE_LEVEL_HIGH>, + <0 0 7 &gic 0 0 0 164 IRQ_TYPE_LEVEL_HIGH>, + <0 0 8 &gic 0 0 0 165 IRQ_TYPE_LEVEL_HIGH>, + <0 0 9 &gic 0 0 0 166 IRQ_TYPE_LEVEL_HIGH>, + <0 0 10 &gic 0 0 0 167 IRQ_TYPE_LEVEL_HIGH>, + <0 0 11 &gic 0 0 0 168 IRQ_TYPE_LEVEL_HIGH>, + <0 0 12 &gic 0 0 0 169 IRQ_TYPE_LEVEL_HIGH>; + + /include/ "juno-motherboard.dtsi" + }; diff --git a/kernel/arch/arm64/boot/dts/arm/juno-clocks.dtsi b/kernel/arch/arm64/boot/dts/arm/juno-clocks.dtsi index c9b89efe0..25352ed94 100644 --- a/kernel/arch/arm64/boot/dts/arm/juno-clocks.dtsi +++ b/kernel/arch/arm64/boot/dts/arm/juno-clocks.dtsi @@ -36,9 +36,9 @@ clock-output-names = "apb_pclk"; }; - soc_faxiclk: refclk533mhz { + soc_faxiclk: refclk400mhz { compatible = "fixed-clock"; #clock-cells = <0>; - clock-frequency = <533000000>; + clock-frequency = <400000000>; clock-output-names = "faxi_clk"; }; diff --git a/kernel/arch/arm64/boot/dts/arm/juno-motherboard.dtsi b/kernel/arch/arm64/boot/dts/arm/juno-motherboard.dtsi index 351c95bda..413f1b9eb 100644 --- a/kernel/arch/arm64/boot/dts/arm/juno-motherboard.dtsi +++ b/kernel/arch/arm64/boot/dts/arm/juno-motherboard.dtsi @@ -54,6 +54,70 @@ regulator-always-on; }; + gpio_keys { + compatible = "gpio-keys"; + #address-cells = <1>; + #size-cells = <0>; + + button@1 { + debounce_interval = <50>; + wakeup-source; + linux,code = <116>; + label = "POWER"; + gpios = <&iofpga_gpio0 0 0x4>; + }; + button@2 { + debounce_interval = <50>; + wakeup-source; + linux,code = <102>; + label = "HOME"; + gpios = <&iofpga_gpio0 1 0x4>; + }; + button@3 { + debounce_interval = <50>; + wakeup-source; + linux,code = <152>; + label = "RLOCK"; + gpios = <&iofpga_gpio0 2 0x4>; + }; + button@4 { + debounce_interval = <50>; + wakeup-source; + linux,code = <115>; + label = "VOL+"; + gpios = <&iofpga_gpio0 3 0x4>; + }; + button@5 { + debounce_interval = <50>; + wakeup-source; + linux,code = <114>; + label = "VOL-"; + gpios = <&iofpga_gpio0 4 0x4>; + }; + button@6 { + debounce_interval = <50>; + wakeup-source; + linux,code = <99>; + label = "NMI"; + gpios = <&iofpga_gpio0 5 0x4>; + }; + }; + + flash@0,00000000 { + /* 2 * 32MiB NOR Flash memory mounted on CS0 */ + compatible = "arm,vexpress-flash", "cfi-flash"; + linux,part-probe = "afs"; + reg = <0 0x00000000 0x04000000>; + bank-width = <4>; + /* + * Unfortunately, accessing the flash disturbs + * the CPU idle states (suspend) and CPU + * hotplug of the platform. For this reason, + * flash hardware access is disabled by default. + */ + status = "disabled"; + }; + ethernet@2,00000000 { compatible = "smsc,lan9118", "smsc,lan9115"; reg = <2 0x00000000 0x10000>; @@ -87,6 +151,76 @@ clock-names = "refclk", "timclk", "apb_pclk"; #clock-cells = <1>; clock-output-names = "timerclken0", "timerclken1", "timerclken2", "timerclken3"; + assigned-clocks = <&v2m_sysctl 0>, <&v2m_sysctl 1>, <&v2m_sysctl 3>, <&v2m_sysctl 3>; + assigned-clock-parents = <&v2m_refclk1mhz>, <&v2m_refclk1mhz>, <&v2m_refclk1mhz>, <&v2m_refclk1mhz>; + }; + + apbregs@010000 { + compatible = "syscon", "simple-mfd"; + reg = <0x010000 0x1000>; + + led@08.0 { + compatible = "register-bit-led"; + offset = <0x08>; + mask = <0x01>; + label = "vexpress:0"; + linux,default-trigger = "heartbeat"; + default-state = "on"; + }; + led@08.1 { + compatible = "register-bit-led"; + offset = <0x08>; + mask = <0x02>; + label = "vexpress:1"; + linux,default-trigger = "mmc0"; + default-state = "off"; + }; + led@08.2 { + compatible = "register-bit-led"; + offset = <0x08>; + mask = <0x04>; + label = "vexpress:2"; + linux,default-trigger = "cpu0"; + default-state = "off"; + }; + led@08.3 { + compatible = "register-bit-led"; + offset = <0x08>; + mask = <0x08>; + label = "vexpress:3"; + linux,default-trigger = "cpu1"; + default-state = "off"; + }; + led@08.4 { + compatible = "register-bit-led"; + offset = <0x08>; + mask = <0x10>; + label = "vexpress:4"; + linux,default-trigger = "cpu2"; + default-state = "off"; + }; + led@08.5 { + compatible = "register-bit-led"; + offset = <0x08>; + mask = <0x20>; + label = "vexpress:5"; + linux,default-trigger = "cpu3"; + default-state = "off"; + }; + led@08.6 { + compatible = "register-bit-led"; + offset = <0x08>; + mask = <0x40>; + label = "vexpress:6"; + default-state = "off"; + }; + led@08.7 { + compatible = "register-bit-led"; + offset = <0x08>; + mask = <0x80>; + label = "vexpress:7"; + default-state = "off"; + }; }; mmci@050000 { @@ -148,5 +282,17 @@ clocks = <&soc_smc50mhz>; clock-names = "apb_pclk"; }; + + iofpga_gpio0: gpio@1d0000 { + compatible = "arm,pl061", "arm,primecell"; + reg = <0x1d0000 0x1000>; + interrupts = <6>; + clocks = <&soc_smc50mhz>; + clock-names = "apb_pclk"; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; }; }; diff --git a/kernel/arch/arm64/boot/dts/arm/juno-r1.dts b/kernel/arch/arm64/boot/dts/arm/juno-r1.dts new file mode 100644 index 000000000..93bc3d7d5 --- /dev/null +++ b/kernel/arch/arm64/boot/dts/arm/juno-r1.dts @@ -0,0 +1,172 @@ +/* + * ARM Ltd. Juno Platform + * + * Copyright (c) 2015 ARM Ltd. + * + * This file is licensed under a dual GPLv2 or BSD license. + */ + +/dts-v1/; + +#include <dt-bindings/interrupt-controller/arm-gic.h> + +/ { + model = "ARM Juno development board (r1)"; + compatible = "arm,juno-r1", "arm,juno", "arm,vexpress"; + interrupt-parent = <&gic>; + #address-cells = <2>; + #size-cells = <2>; + + aliases { + serial0 = &soc_uart0; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + psci { + compatible = "arm,psci-0.2"; + method = "smc"; + }; + + cpus { + #address-cells = <2>; + #size-cells = <0>; + + cpu-map { + cluster0 { + core0 { + cpu = <&A57_0>; + }; + core1 { + cpu = <&A57_1>; + }; + }; + + cluster1 { + core0 { + cpu = <&A53_0>; + }; + core1 { + cpu = <&A53_1>; + }; + core2 { + cpu = <&A53_2>; + }; + core3 { + cpu = <&A53_3>; + }; + }; + }; + + A57_0: cpu@0 { + compatible = "arm,cortex-a57","arm,armv8"; + reg = <0x0 0x0>; + device_type = "cpu"; + enable-method = "psci"; + next-level-cache = <&A57_L2>; + clocks = <&scpi_dvfs 0>; + }; + + A57_1: cpu@1 { + compatible = "arm,cortex-a57","arm,armv8"; + reg = <0x0 0x1>; + device_type = "cpu"; + enable-method = "psci"; + next-level-cache = <&A57_L2>; + clocks = <&scpi_dvfs 0>; + }; + + A53_0: cpu@100 { + compatible = "arm,cortex-a53","arm,armv8"; + reg = <0x0 0x100>; + device_type = "cpu"; + enable-method = "psci"; + next-level-cache = <&A53_L2>; + clocks = <&scpi_dvfs 1>; + }; + + A53_1: cpu@101 { + compatible = "arm,cortex-a53","arm,armv8"; + reg = <0x0 0x101>; + device_type = "cpu"; + enable-method = "psci"; + next-level-cache = <&A53_L2>; + clocks = <&scpi_dvfs 1>; + }; + + A53_2: cpu@102 { + compatible = "arm,cortex-a53","arm,armv8"; + reg = <0x0 0x102>; + device_type = "cpu"; + enable-method = "psci"; + next-level-cache = <&A53_L2>; + clocks = <&scpi_dvfs 1>; + }; + + A53_3: cpu@103 { + compatible = "arm,cortex-a53","arm,armv8"; + reg = <0x0 0x103>; + device_type = "cpu"; + enable-method = "psci"; + next-level-cache = <&A53_L2>; + clocks = <&scpi_dvfs 1>; + }; + + A57_L2: l2-cache0 { + compatible = "cache"; + }; + + A53_L2: l2-cache1 { + compatible = "cache"; + }; + }; + + pmu_a57 { + compatible = "arm,cortex-a57-pmu"; + interrupts = <GIC_SPI 02 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 06 IRQ_TYPE_LEVEL_HIGH>; + interrupt-affinity = <&A57_0>, + <&A57_1>; + }; + + pmu_a53 { + compatible = "arm,cortex-a53-pmu"; + interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>; + interrupt-affinity = <&A53_0>, + <&A53_1>, + <&A53_2>, + <&A53_3>; + }; + + #include "juno-base.dtsi" + + pcie-controller@40000000 { + compatible = "arm,juno-r1-pcie", "plda,xpressrich3-axi", "pci-host-ecam-generic"; + device_type = "pci"; + reg = <0 0x40000000 0 0x10000000>; /* ECAM config space */ + bus-range = <0 255>; + linux,pci-domain = <0>; + #address-cells = <3>; + #size-cells = <2>; + dma-coherent; + ranges = <0x01000000 0x00 0x5f800000 0x00 0x5f800000 0x0 0x00800000>, + <0x02000000 0x00 0x50000000 0x00 0x50000000 0x0 0x08000000>, + <0x42000000 0x40 0x00000000 0x40 0x00000000 0x1 0x00000000>; + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 7>; + interrupt-map = <0 0 0 1 &gic 0 0 0 136 4>, + <0 0 0 2 &gic 0 0 0 137 4>, + <0 0 0 3 &gic 0 0 0 138 4>, + <0 0 0 4 &gic 0 0 0 139 4>; + msi-parent = <&v2m_0>; + }; +}; + +&memtimer { + status = "okay"; +}; diff --git a/kernel/arch/arm64/boot/dts/arm/juno.dts b/kernel/arch/arm64/boot/dts/arm/juno.dts index 5e9110a33..53442b5ee 100644 --- a/kernel/arch/arm64/boot/dts/arm/juno.dts +++ b/kernel/arch/arm64/boot/dts/arm/juno.dts @@ -34,12 +34,39 @@ #address-cells = <2>; #size-cells = <0>; + cpu-map { + cluster0 { + core0 { + cpu = <&A57_0>; + }; + core1 { + cpu = <&A57_1>; + }; + }; + + cluster1 { + core0 { + cpu = <&A53_0>; + }; + core1 { + cpu = <&A53_1>; + }; + core2 { + cpu = <&A53_2>; + }; + core3 { + cpu = <&A53_3>; + }; + }; + }; + A57_0: cpu@0 { compatible = "arm,cortex-a57","arm,armv8"; reg = <0x0 0x0>; device_type = "cpu"; enable-method = "psci"; next-level-cache = <&A57_L2>; + clocks = <&scpi_dvfs 0>; }; A57_1: cpu@1 { @@ -48,6 +75,7 @@ device_type = "cpu"; enable-method = "psci"; next-level-cache = <&A57_L2>; + clocks = <&scpi_dvfs 0>; }; A53_0: cpu@100 { @@ -56,6 +84,7 @@ device_type = "cpu"; enable-method = "psci"; next-level-cache = <&A53_L2>; + clocks = <&scpi_dvfs 1>; }; A53_1: cpu@101 { @@ -64,6 +93,7 @@ device_type = "cpu"; enable-method = "psci"; next-level-cache = <&A53_L2>; + clocks = <&scpi_dvfs 1>; }; A53_2: cpu@102 { @@ -72,6 +102,7 @@ device_type = "cpu"; enable-method = "psci"; next-level-cache = <&A53_L2>; + clocks = <&scpi_dvfs 1>; }; A53_3: cpu@103 { @@ -80,6 +111,7 @@ device_type = "cpu"; enable-method = "psci"; next-level-cache = <&A53_L2>; + clocks = <&scpi_dvfs 1>; }; A57_L2: l2-cache0 { @@ -91,148 +123,25 @@ }; }; - memory@80000000 { - device_type = "memory"; - /* last 16MB of the first memory area is reserved for secure world use by firmware */ - reg = <0x00000000 0x80000000 0x0 0x7f000000>, - <0x00000008 0x80000000 0x1 0x80000000>; - }; - - gic: interrupt-controller@2c001000 { - compatible = "arm,gic-400", "arm,cortex-a15-gic"; - reg = <0x0 0x2c010000 0 0x1000>, - <0x0 0x2c02f000 0 0x2000>, - <0x0 0x2c04f000 0 0x2000>, - <0x0 0x2c06f000 0 0x2000>; - #address-cells = <0>; - #interrupt-cells = <3>; - interrupt-controller; - interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_HIGH)>; - }; - - timer { - compatible = "arm,armv8-timer"; - interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_LOW)>, - <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_LOW)>, - <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_LOW)>, - <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_LOW)>; + pmu_a57 { + compatible = "arm,cortex-a57-pmu"; + interrupts = <GIC_SPI 02 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 06 IRQ_TYPE_LEVEL_HIGH>; + interrupt-affinity = <&A57_0>, + <&A57_1>; }; - pmu { - compatible = "arm,armv8-pmuv3"; - interrupts = <GIC_SPI 02 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 06 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>, + pmu_a53 { + compatible = "arm,cortex-a53-pmu"; + interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>; - interrupt-affinity = <&A57_0>, - <&A57_1>, - <&A53_0>, + interrupt-affinity = <&A53_0>, <&A53_1>, <&A53_2>, <&A53_3>; }; - /include/ "juno-clocks.dtsi" - - dma@7ff00000 { - compatible = "arm,pl330", "arm,primecell"; - reg = <0x0 0x7ff00000 0 0x1000>; - #dma-cells = <1>; - #dma-channels = <8>; - #dma-requests = <32>; - interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&soc_faxiclk>; - clock-names = "apb_pclk"; - }; - - soc_uart0: uart@7ff80000 { - compatible = "arm,pl011", "arm,primecell"; - reg = <0x0 0x7ff80000 0x0 0x1000>; - interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&soc_uartclk>, <&soc_refclk100mhz>; - clock-names = "uartclk", "apb_pclk"; - }; - - i2c@7ffa0000 { - compatible = "snps,designware-i2c"; - reg = <0x0 0x7ffa0000 0x0 0x1000>; - #address-cells = <1>; - #size-cells = <0>; - interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>; - clock-frequency = <400000>; - i2c-sda-hold-time-ns = <500>; - clocks = <&soc_smc50mhz>; - - dvi0: dvi-transmitter@70 { - compatible = "nxp,tda998x"; - reg = <0x70>; - }; - - dvi1: dvi-transmitter@71 { - compatible = "nxp,tda998x"; - reg = <0x71>; - }; - }; - - ohci@7ffb0000 { - compatible = "generic-ohci"; - reg = <0x0 0x7ffb0000 0x0 0x10000>; - interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&soc_usb48mhz>; - }; - - ehci@7ffc0000 { - compatible = "generic-ehci"; - reg = <0x0 0x7ffc0000 0x0 0x10000>; - interrupts = <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&soc_usb48mhz>; - }; - - memory-controller@7ffd0000 { - compatible = "arm,pl354", "arm,primecell"; - reg = <0 0x7ffd0000 0 0x1000>; - interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&soc_smc50mhz>; - clock-names = "apb_pclk"; - }; - - smb { - compatible = "simple-bus"; - #address-cells = <2>; - #size-cells = <1>; - ranges = <0 0 0 0x08000000 0x04000000>, - <1 0 0 0x14000000 0x04000000>, - <2 0 0 0x18000000 0x04000000>, - <3 0 0 0x1c000000 0x04000000>, - <4 0 0 0x0c000000 0x04000000>, - <5 0 0 0x10000000 0x04000000>; - - #interrupt-cells = <1>; - interrupt-map-mask = <0 0 15>; - interrupt-map = <0 0 0 &gic 0 68 IRQ_TYPE_LEVEL_HIGH>, - <0 0 1 &gic 0 69 IRQ_TYPE_LEVEL_HIGH>, - <0 0 2 &gic 0 70 IRQ_TYPE_LEVEL_HIGH>, - <0 0 3 &gic 0 160 IRQ_TYPE_LEVEL_HIGH>, - <0 0 4 &gic 0 161 IRQ_TYPE_LEVEL_HIGH>, - <0 0 5 &gic 0 162 IRQ_TYPE_LEVEL_HIGH>, - <0 0 6 &gic 0 163 IRQ_TYPE_LEVEL_HIGH>, - <0 0 7 &gic 0 164 IRQ_TYPE_LEVEL_HIGH>, - <0 0 8 &gic 0 165 IRQ_TYPE_LEVEL_HIGH>, - <0 0 9 &gic 0 166 IRQ_TYPE_LEVEL_HIGH>, - <0 0 10 &gic 0 167 IRQ_TYPE_LEVEL_HIGH>, - <0 0 11 &gic 0 168 IRQ_TYPE_LEVEL_HIGH>, - <0 0 12 &gic 0 169 IRQ_TYPE_LEVEL_HIGH>; - - /include/ "juno-motherboard.dtsi" - }; + #include "juno-base.dtsi" }; diff --git a/kernel/arch/arm64/boot/dts/arm/rtsm_ve-motherboard.dtsi b/kernel/arch/arm64/boot/dts/arm/rtsm_ve-motherboard.dtsi index c46cbb29f..88a7583ed 100644 --- a/kernel/arch/arm64/boot/dts/arm/rtsm_ve-motherboard.dtsi +++ b/kernel/arch/arm64/boot/dts/arm/rtsm_ve-motherboard.dtsi @@ -74,6 +74,8 @@ clock-names = "refclk", "timclk", "apb_pclk"; #clock-cells = <1>; clock-output-names = "timerclken0", "timerclken1", "timerclken2", "timerclken3"; + assigned-clocks = <&v2m_sysctl 0>, <&v2m_sysctl 1>, <&v2m_sysctl 3>, <&v2m_sysctl 3>; + assigned-clock-parents = <&v2m_refclk1mhz>, <&v2m_refclk1mhz>, <&v2m_refclk1mhz>, <&v2m_refclk1mhz>; }; aaci@040000 { diff --git a/kernel/arch/arm64/boot/dts/arm/vexpress-v2f-1xv7-ca53x2.dts b/kernel/arch/arm64/boot/dts/arm/vexpress-v2f-1xv7-ca53x2.dts new file mode 100644 index 000000000..bb3c26d11 --- /dev/null +++ b/kernel/arch/arm64/boot/dts/arm/vexpress-v2f-1xv7-ca53x2.dts @@ -0,0 +1,191 @@ +/* + * ARM Ltd. Versatile Express + * + * LogicTile Express 20MG + * V2F-1XV7 + * + * Cortex-A53 (2 cores) Soft Macrocell Model + * + * HBI-0247C + */ + +/dts-v1/; + +#include <dt-bindings/interrupt-controller/arm-gic.h> + +/ { + model = "V2F-1XV7 Cortex-A53x2 SMM"; + arm,hbi = <0x247>; + arm,vexpress,site = <0xf>; + compatible = "arm,vexpress,v2f-1xv7,ca53x2", "arm,vexpress,v2f-1xv7", "arm,vexpress"; + interrupt-parent = <&gic>; + #address-cells = <2>; + #size-cells = <2>; + + chosen { + stdout-path = "serial0:38400n8"; + }; + + aliases { + serial0 = &v2m_serial0; + serial1 = &v2m_serial1; + serial2 = &v2m_serial2; + serial3 = &v2m_serial3; + i2c0 = &v2m_i2c_dvi; + i2c1 = &v2m_i2c_pcie; + }; + + cpus { + #address-cells = <2>; + #size-cells = <0>; + + cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a53", "arm,armv8"; + reg = <0 0>; + next-level-cache = <&L2_0>; + }; + + cpu@1 { + device_type = "cpu"; + compatible = "arm,cortex-a53", "arm,armv8"; + reg = <0 1>; + next-level-cache = <&L2_0>; + }; + + L2_0: l2-cache0 { + compatible = "cache"; + }; + }; + + memory@80000000 { + device_type = "memory"; + reg = <0 0x80000000 0 0x80000000>; /* 2GB @ 2GB */ + }; + + gic: interrupt-controller@2c001000 { + compatible = "arm,gic-400"; + #interrupt-cells = <3>; + #address-cells = <0>; + interrupt-controller; + reg = <0 0x2c001000 0 0x1000>, + <0 0x2c002000 0 0x2000>, + <0 0x2c004000 0 0x2000>, + <0 0x2c006000 0 0x2000>; + interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_HIGH)>; + }; + + timer { + compatible = "arm,armv8-timer"; + interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>; + }; + + pmu { + compatible = "arm,armv8-pmuv3"; + interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>; + }; + + dcc { + compatible = "arm,vexpress,config-bus"; + arm,vexpress,config-bridge = <&v2m_sysreg>; + + smbclk: osc@4 { + /* SMC clock */ + compatible = "arm,vexpress-osc"; + arm,vexpress-sysreg,func = <1 4>; + freq-range = <40000000 40000000>; + #clock-cells = <0>; + clock-output-names = "smclk"; + }; + + volt@0 { + /* VIO to expansion board above */ + compatible = "arm,vexpress-volt"; + arm,vexpress-sysreg,func = <2 0>; + regulator-name = "VIO_UP"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + volt@1 { + /* 12V from power connector J6 */ + compatible = "arm,vexpress-volt"; + arm,vexpress-sysreg,func = <2 1>; + regulator-name = "12"; + regulator-always-on; + }; + + temp@0 { + /* FPGA temperature */ + compatible = "arm,vexpress-temp"; + arm,vexpress-sysreg,func = <4 0>; + label = "FPGA"; + }; + }; + + smb { + compatible = "simple-bus"; + + #address-cells = <2>; + #size-cells = <1>; + ranges = <0 0 0 0x08000000 0x04000000>, + <1 0 0 0x14000000 0x04000000>, + <2 0 0 0x18000000 0x04000000>, + <3 0 0 0x1c000000 0x04000000>, + <4 0 0 0x0c000000 0x04000000>, + <5 0 0 0x10000000 0x04000000>; + + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 63>; + interrupt-map = <0 0 0 &gic GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>, + <0 0 1 &gic GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>, + <0 0 2 &gic GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>, + <0 0 3 &gic GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>, + <0 0 4 &gic GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>, + <0 0 5 &gic GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>, + <0 0 6 &gic GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>, + <0 0 7 &gic GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>, + <0 0 8 &gic GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>, + <0 0 9 &gic GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>, + <0 0 10 &gic GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>, + <0 0 11 &gic GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>, + <0 0 12 &gic GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>, + <0 0 13 &gic GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>, + <0 0 14 &gic GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>, + <0 0 15 &gic GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>, + <0 0 16 &gic GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>, + <0 0 17 &gic GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>, + <0 0 18 &gic GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>, + <0 0 19 &gic GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>, + <0 0 20 &gic GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>, + <0 0 21 &gic GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>, + <0 0 22 &gic GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>, + <0 0 23 &gic GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>, + <0 0 24 &gic GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>, + <0 0 25 &gic GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>, + <0 0 26 &gic GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>, + <0 0 27 &gic GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>, + <0 0 28 &gic GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>, + <0 0 29 &gic GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>, + <0 0 30 &gic GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>, + <0 0 31 &gic GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>, + <0 0 32 &gic GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>, + <0 0 33 &gic GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>, + <0 0 34 &gic GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>, + <0 0 35 &gic GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>, + <0 0 36 &gic GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>, + <0 0 37 &gic GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>, + <0 0 38 &gic GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>, + <0 0 39 &gic GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>, + <0 0 40 &gic GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>, + <0 0 41 &gic GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>, + <0 0 42 &gic GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>; + + /include/ "vexpress-v2m-rs1.dtsi" + }; +}; diff --git a/kernel/arch/arm64/boot/dts/arm/vexpress-v2m-rs1.dtsi b/kernel/arch/arm64/boot/dts/arm/vexpress-v2m-rs1.dtsi new file mode 120000 index 000000000..68fd0f8f1 --- /dev/null +++ b/kernel/arch/arm64/boot/dts/arm/vexpress-v2m-rs1.dtsi @@ -0,0 +1 @@ +../../../../arm/boot/dts/vexpress-v2m-rs1.dtsi
\ No newline at end of file |