1 files changed, 208 insertions, 0 deletions

diff --git a/kernel/arch/arm/plat-samsung/pm.c b/kernel/arch/arm/plat-samsung/pm.c
new file mode 100644
index 000000000..82777c649
--- /dev/null
+++ b/kernel/arch/arm/plat-samsung/pm.c
@@ -0,0 +1,208 @@
+/* linux/arch/arm/plat-s3c/pm.c
+ *
+ * Copyright 2008 Openmoko, Inc.
+ * Copyright 2004-2008 Simtec Electronics
+ *	Ben Dooks <ben@simtec.co.uk>
+ *	http://armlinux.simtec.co.uk/
+ *
+ * S3C common power management (suspend to ram) support.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/init.h>
+#include <linux/suspend.h>
+#include <linux/errno.h>
+#include <linux/delay.h>
+#include <linux/of.h>
+#include <linux/serial_s3c.h>
+#include <linux/io.h>
+
+#include <asm/cacheflush.h>
+#include <asm/suspend.h>
+
+#ifdef CONFIG_SAMSUNG_ATAGS
+#include <mach/map.h>
+#ifndef CONFIG_ARCH_EXYNOS
+#include <mach/regs-clock.h>
+#include <mach/regs-irq.h>
+#endif
+#include <mach/irqs.h>
+#endif
+
+#include <asm/irq.h>
+
+#include <plat/pm.h>
+#include <mach/pm-core.h>
+
+/* for external use */
+
+unsigned long s3c_pm_flags;
+
+/* The IRQ ext-int code goes here, it is too small to currently bother
+ * with its own file. */
+
+unsigned long s3c_irqwake_intmask	= 0xffffffffL;
+unsigned long s3c_irqwake_eintmask	= 0xffffffffL;
+
+int s3c_irqext_wake(struct irq_data *data, unsigned int state)
+{
+	unsigned long bit = 1L << IRQ_EINT_BIT(data->irq);
+
+	if (!(s3c_irqwake_eintallow & bit))
+		return -ENOENT;
+
+	printk(KERN_INFO "wake %s for irq %d\n",
+	       state ? "enabled" : "disabled", data->irq);
+
+	if (!state)
+		s3c_irqwake_eintmask |= bit;
+	else
+		s3c_irqwake_eintmask &= ~bit;
+
+	return 0;
+}
+
+void (*pm_cpu_prep)(void);
+int (*pm_cpu_sleep)(unsigned long);
+
+#define any_allowed(mask, allow) (((mask) & (allow)) != (allow))
+
+/* s3c_pm_enter
+ *
+ * central control for sleep/resume process
+*/
+
+static int s3c_pm_enter(suspend_state_t state)
+{
+	int ret;
+	/* ensure the debug is initialised (if enabled) */
+
+	s3c_pm_debug_init();
+
+	S3C_PMDBG("%s(%d)\n", __func__, state);
+
+	if (pm_cpu_prep == NULL || pm_cpu_sleep == NULL) {
+		printk(KERN_ERR "%s: error: no cpu sleep function\n", __func__);
+		return -EINVAL;
+	}
+
+	/* check if we have anything to wake-up with... bad things seem
+	 * to happen if you suspend with no wakeup (system will often
+	 * require a full power-cycle)
+	*/
+
+	if (!of_have_populated_dt() &&
+	    !any_allowed(s3c_irqwake_intmask, s3c_irqwake_intallow) &&
+	    !any_allowed(s3c_irqwake_eintmask, s3c_irqwake_eintallow)) {
+		printk(KERN_ERR "%s: No wake-up sources!\n", __func__);
+		printk(KERN_ERR "%s: Aborting sleep\n", __func__);
+		return -EINVAL;
+	}
+
+	/* save all necessary core registers not covered by the drivers */
+
+	if (!of_have_populated_dt()) {
+		samsung_pm_save_gpios();
+		samsung_pm_saved_gpios();
+	}
+
+	s3c_pm_save_uarts();
+	s3c_pm_save_core();
+
+	/* set the irq configuration for wake */
+
+	s3c_pm_configure_extint();
+
+	S3C_PMDBG("sleep: irq wakeup masks: %08lx,%08lx\n",
+	    s3c_irqwake_intmask, s3c_irqwake_eintmask);
+
+	s3c_pm_arch_prepare_irqs();
+
+	/* call cpu specific preparation */
+
+	pm_cpu_prep();
+
+	/* flush cache back to ram */
+
+	flush_cache_all();
+
+	s3c_pm_check_store();
+
+	/* send the cpu to sleep... */
+
+	s3c_pm_arch_stop_clocks();
+
+	/* this will also act as our return point from when
+	 * we resume as it saves its own register state and restores it
+	 * during the resume.  */
+
+	ret = cpu_suspend(0, pm_cpu_sleep);
+	if (ret)
+		return ret;
+
+	/* restore the system state */
+
+	s3c_pm_restore_core();
+	s3c_pm_restore_uarts();
+
+	if (!of_have_populated_dt()) {
+		samsung_pm_restore_gpios();
+		s3c_pm_restored_gpios();
+	}
+
+	s3c_pm_debug_init();
+
+	/* check what irq (if any) restored the system */
+
+	s3c_pm_arch_show_resume_irqs();
+
+	S3C_PMDBG("%s: post sleep, preparing to return\n", __func__);
+
+	/* LEDs should now be 1110 */
+	s3c_pm_debug_smdkled(1 << 1, 0);
+
+	s3c_pm_check_restore();
+
+	/* ok, let's return from sleep */
+
+	S3C_PMDBG("S3C PM Resume (post-restore)\n");
+	return 0;
+}
+
+static int s3c_pm_prepare(void)
+{
+	/* prepare check area if configured */
+
+	s3c_pm_check_prepare();
+	return 0;
+}
+
+static void s3c_pm_finish(void)
+{
+	s3c_pm_check_cleanup();
+}
+
+static const struct platform_suspend_ops s3c_pm_ops = {
+	.enter		= s3c_pm_enter,
+	.prepare	= s3c_pm_prepare,
+	.finish		= s3c_pm_finish,
+	.valid		= suspend_valid_only_mem,
+};
+
+/* s3c_pm_init
+ *
+ * Attach the power management functions. This should be called
+ * from the board specific initialisation if the board supports
+ * it.
+*/
+
+int __init s3c_pm_init(void)
+{
+	printk("S3C Power Management, Copyright 2004 Simtec Electronics\n");
+
+	suspend_set_ops(&s3c_pm_ops);
+	return 0;
+}