summaryrefslogtreecommitdiffstats
path: root/kernel/arch/arm/plat-samsung/Kconfig
diff options
context:
space:
mode:
Diffstat (limited to 'kernel/arch/arm/plat-samsung/Kconfig')
-rw-r--r--kernel/arch/arm/plat-samsung/Kconfig323
1 files changed, 323 insertions, 0 deletions
diff --git a/kernel/arch/arm/plat-samsung/Kconfig b/kernel/arch/arm/plat-samsung/Kconfig
new file mode 100644
index 000000000..cb8e3d655
--- /dev/null
+++ b/kernel/arch/arm/plat-samsung/Kconfig
@@ -0,0 +1,323 @@
+# arch/arm/plat-samsung/Kconfig
+#
+# Copyright 2009 Simtec Electronics
+#
+# Licensed under GPLv2
+
+config PLAT_SAMSUNG
+ bool
+ depends on PLAT_S3C24XX || ARCH_S3C64XX || ARCH_EXYNOS || ARCH_S5PV210
+ default y
+ select GENERIC_IRQ_CHIP
+ select NO_IOPORT_MAP
+ help
+ Base platform code for all Samsung SoC based systems
+
+config SAMSUNG_PM
+ bool
+ depends on PM && (PLAT_S3C24XX || ARCH_S3C64XX)
+ default y
+ help
+ Base platform power management code for samsung code
+
+if PLAT_SAMSUNG
+menu "Samsung Common options"
+
+# boot configurations
+
+comment "Boot options"
+
+config S3C_LOWLEVEL_UART_PORT
+ int "S3C UART to use for low-level messages"
+ depends on ARCH_S3C64XX
+ default 0
+ help
+ Choice of which UART port to use for the low-level messages,
+ such as the `Uncompressing...` at start time. The value of
+ this configuration should be between zero and two. The port
+ must have been initialised by the boot-loader before use.
+
+config SAMSUNG_ATAGS
+ def_bool n
+ depends on !ARCH_MULTIPLATFORM
+ depends on ATAGS
+ help
+ This option enables ATAGS based boot support code for
+ Samsung platforms, including static platform devices, legacy
+ clock, timer and interrupt initialization, etc.
+
+ Platforms that support only DT based boot need not to select
+ this option.
+
+if SAMSUNG_ATAGS
+
+config S3C_GPIO_SPACE
+ int "Space between gpio banks"
+ default 0
+ help
+ Add a number of spare GPIO entries between each bank for debugging
+ purposes. This allows any problems where an counter overflows from
+ one bank to another to be caught, at the expense of using a little
+ more memory.
+
+config S3C_GPIO_TRACK
+ bool
+ help
+ Internal configuration option to enable the s3c specific gpio
+ chip tracking if the platform requires it.
+
+# ADC driver
+
+config S3C_ADC
+ bool "ADC common driver support"
+ help
+ Core support for the ADC block found in the Samsung SoC systems
+ for drivers such as the touchscreen and hwmon to use to share
+ this resource.
+
+# device definitions to compile in
+
+config S3C_DEV_HSMMC
+ bool
+ help
+ Compile in platform device definitions for HSMMC code
+
+config S3C_DEV_HSMMC1
+ bool
+ help
+ Compile in platform device definitions for HSMMC channel 1
+
+config S3C_DEV_HSMMC2
+ bool
+ help
+ Compile in platform device definitions for HSMMC channel 2
+
+config S3C_DEV_HSMMC3
+ bool
+ help
+ Compile in platform device definitions for HSMMC channel 3
+
+config S3C_DEV_HWMON
+ bool
+ help
+ Compile in platform device definitions for HWMON
+
+config S3C_DEV_I2C1
+ bool
+ help
+ Compile in platform device definitions for I2C channel 1
+
+config S3C_DEV_I2C2
+ bool
+ help
+ Compile in platform device definitions for I2C channel 2
+
+config S3C_DEV_I2C3
+ bool
+ help
+ Compile in platform device definition for I2C controller 3
+
+config S3C_DEV_I2C4
+ bool
+ help
+ Compile in platform device definition for I2C controller 4
+
+config S3C_DEV_I2C5
+ bool
+ help
+ Compile in platform device definition for I2C controller 5
+
+config S3C_DEV_I2C6
+ bool
+ help
+ Compile in platform device definition for I2C controller 6
+
+config S3C_DEV_I2C7
+ bool
+ help
+ Compile in platform device definition for I2C controller 7
+
+config S3C_DEV_FB
+ bool
+ help
+ Compile in platform device definition for framebuffer
+
+config S3C_DEV_USB_HOST
+ bool
+ help
+ Compile in platform device definition for USB host.
+
+config S3C_DEV_USB_HSOTG
+ bool
+ help
+ Compile in platform device definition for USB high-speed OtG
+
+config S3C_DEV_WDT
+ bool
+ default y if ARCH_S3C24XX
+ help
+ Complie in platform device definition for Watchdog Timer
+
+config S3C_DEV_NAND
+ bool
+ help
+ Compile in platform device definition for NAND controller
+
+config S3C_DEV_ONENAND
+ bool
+ help
+ Compile in platform device definition for OneNAND controller
+
+config S3C_DEV_RTC
+ bool
+ help
+ Complie in platform device definition for RTC
+
+config SAMSUNG_DEV_ADC
+ bool
+ help
+ Compile in platform device definition for ADC controller
+
+config SAMSUNG_DEV_IDE
+ bool
+ help
+ Compile in platform device definitions for IDE
+
+config S3C64XX_DEV_SPI0
+ bool
+ help
+ Compile in platform device definitions for S3C64XX's type
+ SPI controller 0
+
+config S3C64XX_DEV_SPI1
+ bool
+ help
+ Compile in platform device definitions for S3C64XX's type
+ SPI controller 1
+
+config S3C64XX_DEV_SPI2
+ bool
+ help
+ Compile in platform device definitions for S3C64XX's type
+ SPI controller 2
+
+config SAMSUNG_DEV_TS
+ bool
+ help
+ Common in platform device definitions for touchscreen device
+
+config SAMSUNG_DEV_KEYPAD
+ bool
+ help
+ Compile in platform device definitions for keypad
+
+config SAMSUNG_DEV_PWM
+ bool
+ default y if ARCH_S3C24XX
+ help
+ Compile in platform device definition for PWM Timer
+
+config SAMSUNG_DEV_BACKLIGHT
+ bool
+ depends on SAMSUNG_DEV_PWM
+ help
+ Compile in platform device definition LCD backlight with PWM Timer
+
+config S3C24XX_PWM
+ bool "PWM device support"
+ select PWM
+ select PWM_SAMSUNG
+ help
+ Support for exporting the PWM timer blocks via the pwm device
+ system
+
+config S3C_SETUP_CAMIF
+ bool
+ help
+ Compile in common setup code for S3C CAMIF devices
+
+config SAMSUNG_PM_GPIO
+ bool
+ default y if GPIO_SAMSUNG && PM
+ help
+ Include legacy GPIO power management code for platforms not using
+ pinctrl-samsung driver.
+
+endif
+
+config S5P_DEV_MFC
+ bool
+ help
+ Compile in setup memory (init) code for MFC
+
+comment "Power management"
+
+config SAMSUNG_PM_DEBUG
+ bool "Samsung PM Suspend debug"
+ depends on PM && DEBUG_KERNEL
+ depends on DEBUG_EXYNOS_UART || DEBUG_S3C24XX_UART || DEBUG_S3C2410_UART
+ help
+ Say Y here if you want verbose debugging from the PM Suspend and
+ Resume code. See <file:Documentation/arm/Samsung-S3C24XX/Suspend.txt>
+ for more information.
+
+config S3C_PM_DEBUG_LED_SMDK
+ bool "SMDK LED suspend/resume debugging"
+ depends on PM && (MACH_SMDK6410)
+ help
+ Say Y here to enable the use of the SMDK LEDs on the baseboard
+ for debugging of the state of the suspend and resume process.
+
+ Note, this currently only works for S3C64XX based SMDK boards.
+
+config SAMSUNG_PM_CHECK
+ bool "S3C2410 PM Suspend Memory CRC"
+ depends on PM
+ select CRC32
+ help
+ Enable the PM code's memory area checksum over sleep. This option
+ will generate CRCs of all blocks of memory, and store them before
+ going to sleep. The blocks are then checked on resume for any
+ errors.
+
+ Note, this can take several seconds depending on memory size
+ and CPU speed.
+
+ See <file:Documentation/arm/Samsung-S3C24XX/Suspend.txt>
+
+config SAMSUNG_PM_CHECK_CHUNKSIZE
+ int "S3C2410 PM Suspend CRC Chunksize (KiB)"
+ depends on PM && SAMSUNG_PM_CHECK
+ default 64
+ help
+ Set the chunksize in Kilobytes of the CRC for checking memory
+ corruption over suspend and resume. A smaller value will mean that
+ the CRC data block will take more memory, but wil identify any
+ faults with better precision.
+
+ See <file:Documentation/arm/Samsung-S3C24XX/Suspend.txt>
+
+config SAMSUNG_WAKEMASK
+ bool
+ depends on PM
+ help
+ Compile support for wakeup-mask controls found on the S3C6400
+ and above. This code allows a set of interrupt to wakeup-mask
+ mappings. See <plat/wakeup-mask.h>
+
+config SAMSUNG_WDT_RESET
+ bool
+ help
+ Compile support for system restart by triggering watchdog reset.
+ Used on SoCs that do not provide dedicated reset control.
+
+config DEBUG_S3C_UART
+ depends on PLAT_SAMSUNG
+ int
+ default "0" if DEBUG_S3C_UART0
+ default "1" if DEBUG_S3C_UART1
+ default "2" if DEBUG_S3C_UART2
+ default "3" if DEBUG_S3C_UART3
+
+endmenu
+endif