diff options
Diffstat (limited to 'kernel/arch/arm/mach-pxa/cm-x2xx-pci.c')
| -rw-r--r-- | kernel/arch/arm/mach-pxa/cm-x2xx-pci.c | 199 |
1 files changed, 199 insertions, 0 deletions
diff --git a/kernel/arch/arm/mach-pxa/cm-x2xx-pci.c b/kernel/arch/arm/mach-pxa/cm-x2xx-pci.c new file mode 100644 index 000000000..d8f816c24 --- /dev/null +++ b/kernel/arch/arm/mach-pxa/cm-x2xx-pci.c @@ -0,0 +1,199 @@ +/* + * linux/arch/arm/mach-pxa/cm-x2xx-pci.c + * + * PCI bios-type initialisation for PCI machines + * + * Bits taken from various places. + * + * Copyright (C) 2007, 2008 Compulab, Ltd. + * Mike Rapoport <mike@compulab.co.il> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/kernel.h> +#include <linux/pci.h> +#include <linux/init.h> +#include <linux/device.h> +#include <linux/platform_device.h> +#include <linux/irq.h> +#include <linux/gpio.h> + +#include <asm/mach/pci.h> +#include <asm/mach-types.h> + +#include <asm/hardware/it8152.h> + +void __iomem *it8152_base_address; +static int cmx2xx_it8152_irq_gpio; + +static void cmx2xx_it8152_irq_demux(unsigned int irq, struct irq_desc *desc) +{ + /* clear our parent irq */ + desc->irq_data.chip->irq_ack(&desc->irq_data); + + it8152_irq_demux(irq, desc); +} + +void __cmx2xx_pci_init_irq(int irq_gpio) +{ + it8152_init_irq(); + + cmx2xx_it8152_irq_gpio = irq_gpio; + + irq_set_irq_type(gpio_to_irq(irq_gpio), IRQ_TYPE_EDGE_RISING); + + irq_set_chained_handler(gpio_to_irq(irq_gpio), + cmx2xx_it8152_irq_demux); +} + +#ifdef CONFIG_PM +static unsigned long sleep_save_ite[10]; + +void __cmx2xx_pci_suspend(void) +{ + /* save ITE state */ + sleep_save_ite[0] = __raw_readl(IT8152_INTC_PDCNIMR); + sleep_save_ite[1] = __raw_readl(IT8152_INTC_LPCNIMR); + sleep_save_ite[2] = __raw_readl(IT8152_INTC_LPNIAR); + + /* Clear ITE IRQ's */ + __raw_writel((0), IT8152_INTC_PDCNIRR); + __raw_writel((0), IT8152_INTC_LPCNIRR); +} + +void __cmx2xx_pci_resume(void) +{ + /* restore IT8152 state */ + __raw_writel((sleep_save_ite[0]), IT8152_INTC_PDCNIMR); + __raw_writel((sleep_save_ite[1]), IT8152_INTC_LPCNIMR); + __raw_writel((sleep_save_ite[2]), IT8152_INTC_LPNIAR); +} +#else +void cmx2xx_pci_suspend(void) {} +void cmx2xx_pci_resume(void) {} +#endif + +/* PCI IRQ mapping*/ +static int __init cmx2xx_pci_map_irq(const struct pci_dev *dev, u8 slot, u8 pin) +{ + int irq; + + dev_dbg(&dev->dev, "%s: slot=%x, pin=%x\n", __func__, slot, pin); + + irq = it8152_pci_map_irq(dev, slot, pin); + if (irq) + return irq; + + /* + Here comes the ugly part. The routing is baseboard specific, + but defining a platform for each possible base of CM-X2XX is + unrealistic. Here we keep mapping for ATXBase and SB-X2XX. + */ + /* ATXBASE PCI slot */ + if (slot == 7) + return IT8152_PCI_INTA; + + /* ATXBase/SB-X2XX CardBus */ + if (slot == 8 || slot == 0) + return IT8152_PCI_INTB; + + /* ATXBase Ethernet */ + if (slot == 9) + return IT8152_PCI_INTA; + + /* CM-x255 Onboard Ethernet */ + if (slot == 15) + return IT8152_PCI_INTC; + + /* SB-x2xx Ethernet */ + if (slot == 16) + return IT8152_PCI_INTA; + + /* PC104+ interrupt routing */ + if ((slot == 17) || (slot == 19)) + return IT8152_PCI_INTA; + if ((slot == 18) || (slot == 20)) + return IT8152_PCI_INTB; + + return(0); +} + +static void cmx2xx_pci_preinit(void) +{ + pr_info("Initializing CM-X2XX PCI subsystem\n"); + + pcibios_min_io = 0; + pcibios_min_mem = 0; + + __raw_writel(0x800, IT8152_PCI_CFG_ADDR); + if (__raw_readl(IT8152_PCI_CFG_DATA) == 0x81521283) { + pr_info("PCI Bridge found.\n"); + + /* set PCI I/O base at 0 */ + writel(0x848, IT8152_PCI_CFG_ADDR); + writel(0, IT8152_PCI_CFG_DATA); + + /* set PCI memory base at 0 */ + writel(0x840, IT8152_PCI_CFG_ADDR); + writel(0, IT8152_PCI_CFG_DATA); + + writel(0x20, IT8152_GPIO_GPDR); + + /* CardBus Controller on ATXbase baseboard */ + writel(0x4000, IT8152_PCI_CFG_ADDR); + if (readl(IT8152_PCI_CFG_DATA) == 0xAC51104C) { + pr_info("CardBus Bridge found.\n"); + + /* Configure socket 0 */ + writel(0x408C, IT8152_PCI_CFG_ADDR); + writel(0x1022, IT8152_PCI_CFG_DATA); + + writel(0x4080, IT8152_PCI_CFG_ADDR); + writel(0x3844d060, IT8152_PCI_CFG_DATA); + + writel(0x4090, IT8152_PCI_CFG_ADDR); + writel(((readl(IT8152_PCI_CFG_DATA) & 0xffff) | + 0x60440000), + IT8152_PCI_CFG_DATA); + + writel(0x4018, IT8152_PCI_CFG_ADDR); + writel(0xb0000000, IT8152_PCI_CFG_DATA); + + /* Configure socket 1 */ + writel(0x418C, IT8152_PCI_CFG_ADDR); + writel(0x1022, IT8152_PCI_CFG_DATA); + + writel(0x4180, IT8152_PCI_CFG_ADDR); + writel(0x3844d060, IT8152_PCI_CFG_DATA); + + writel(0x4190, IT8152_PCI_CFG_ADDR); + writel(((readl(IT8152_PCI_CFG_DATA) & 0xffff) | + 0x60440000), + IT8152_PCI_CFG_DATA); + + writel(0x4118, IT8152_PCI_CFG_ADDR); + writel(0xb0000000, IT8152_PCI_CFG_DATA); + } + } +} + +static struct hw_pci cmx2xx_pci __initdata = { + .map_irq = cmx2xx_pci_map_irq, + .nr_controllers = 1, + .ops = &it8152_ops, + .setup = it8152_pci_setup, + .preinit = cmx2xx_pci_preinit, +}; + +static int __init cmx2xx_init_pci(void) +{ + if (machine_is_armcore()) + pci_common_init(&cmx2xx_pci); + + return 0; +} + +subsys_initcall(cmx2xx_init_pci); |