summaryrefslogtreecommitdiffstats
path: root/kernel/arch/arm/mach-orion5x/kurobox_pro-setup.c
diff options
context:
space:
mode:
Diffstat (limited to 'kernel/arch/arm/mach-orion5x/kurobox_pro-setup.c')
-rw-r--r--kernel/arch/arm/mach-orion5x/kurobox_pro-setup.c408
1 files changed, 408 insertions, 0 deletions
diff --git a/kernel/arch/arm/mach-orion5x/kurobox_pro-setup.c b/kernel/arch/arm/mach-orion5x/kurobox_pro-setup.c
new file mode 100644
index 000000000..fe6a48a32
--- /dev/null
+++ b/kernel/arch/arm/mach-orion5x/kurobox_pro-setup.c
@@ -0,0 +1,408 @@
+/*
+ * arch/arm/mach-orion5x/kurobox_pro-setup.c
+ *
+ * Maintainer: Ronen Shitrit <rshitrit@marvell.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+#include <linux/gpio.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/pci.h>
+#include <linux/irq.h>
+#include <linux/delay.h>
+#include <linux/mtd/physmap.h>
+#include <linux/mtd/nand.h>
+#include <linux/mv643xx_eth.h>
+#include <linux/i2c.h>
+#include <linux/serial_reg.h>
+#include <linux/ata_platform.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/pci.h>
+#include <mach/orion5x.h>
+#include <linux/platform_data/mtd-orion_nand.h>
+#include "common.h"
+#include "mpp.h"
+
+/*****************************************************************************
+ * KUROBOX-PRO Info
+ ****************************************************************************/
+
+/*
+ * 256K NOR flash Device bus boot chip select
+ */
+
+#define KUROBOX_PRO_NOR_BOOT_BASE 0xf4000000
+#define KUROBOX_PRO_NOR_BOOT_SIZE SZ_256K
+
+/*
+ * 256M NAND flash on Device bus chip select 1
+ */
+
+#define KUROBOX_PRO_NAND_BASE 0xfc000000
+#define KUROBOX_PRO_NAND_SIZE SZ_2M
+
+/*****************************************************************************
+ * 256MB NAND Flash on Device bus CS0
+ ****************************************************************************/
+
+static struct mtd_partition kurobox_pro_nand_parts[] = {
+ {
+ .name = "uImage",
+ .offset = 0,
+ .size = SZ_4M,
+ }, {
+ .name = "rootfs",
+ .offset = SZ_4M,
+ .size = SZ_64M,
+ }, {
+ .name = "extra",
+ .offset = SZ_4M + SZ_64M,
+ .size = SZ_256M - (SZ_4M + SZ_64M),
+ },
+};
+
+static struct resource kurobox_pro_nand_resource = {
+ .flags = IORESOURCE_MEM,
+ .start = KUROBOX_PRO_NAND_BASE,
+ .end = KUROBOX_PRO_NAND_BASE + KUROBOX_PRO_NAND_SIZE - 1,
+};
+
+static struct orion_nand_data kurobox_pro_nand_data = {
+ .parts = kurobox_pro_nand_parts,
+ .nr_parts = ARRAY_SIZE(kurobox_pro_nand_parts),
+ .cle = 0,
+ .ale = 1,
+ .width = 8,
+};
+
+static struct platform_device kurobox_pro_nand_flash = {
+ .name = "orion_nand",
+ .id = -1,
+ .dev = {
+ .platform_data = &kurobox_pro_nand_data,
+ },
+ .resource = &kurobox_pro_nand_resource,
+ .num_resources = 1,
+};
+
+/*****************************************************************************
+ * 256KB NOR Flash on BOOT Device
+ ****************************************************************************/
+
+static struct physmap_flash_data kurobox_pro_nor_flash_data = {
+ .width = 1,
+};
+
+static struct resource kurobox_pro_nor_flash_resource = {
+ .flags = IORESOURCE_MEM,
+ .start = KUROBOX_PRO_NOR_BOOT_BASE,
+ .end = KUROBOX_PRO_NOR_BOOT_BASE + KUROBOX_PRO_NOR_BOOT_SIZE - 1,
+};
+
+static struct platform_device kurobox_pro_nor_flash = {
+ .name = "physmap-flash",
+ .id = 0,
+ .dev = {
+ .platform_data = &kurobox_pro_nor_flash_data,
+ },
+ .num_resources = 1,
+ .resource = &kurobox_pro_nor_flash_resource,
+};
+
+/*****************************************************************************
+ * PCI
+ ****************************************************************************/
+
+static int __init kurobox_pro_pci_map_irq(const struct pci_dev *dev, u8 slot,
+ u8 pin)
+{
+ int irq;
+
+ /*
+ * Check for devices with hard-wired IRQs.
+ */
+ irq = orion5x_pci_map_irq(dev, slot, pin);
+ if (irq != -1)
+ return irq;
+
+ /*
+ * PCI isn't used on the Kuro
+ */
+ return -1;
+}
+
+static struct hw_pci kurobox_pro_pci __initdata = {
+ .nr_controllers = 2,
+ .setup = orion5x_pci_sys_setup,
+ .scan = orion5x_pci_sys_scan_bus,
+ .map_irq = kurobox_pro_pci_map_irq,
+};
+
+static int __init kurobox_pro_pci_init(void)
+{
+ if (machine_is_kurobox_pro()) {
+ orion5x_pci_disable();
+ pci_common_init(&kurobox_pro_pci);
+ }
+
+ return 0;
+}
+
+subsys_initcall(kurobox_pro_pci_init);
+
+/*****************************************************************************
+ * Ethernet
+ ****************************************************************************/
+
+static struct mv643xx_eth_platform_data kurobox_pro_eth_data = {
+ .phy_addr = MV643XX_ETH_PHY_ADDR(8),
+};
+
+/*****************************************************************************
+ * RTC 5C372a on I2C bus
+ ****************************************************************************/
+static struct i2c_board_info __initdata kurobox_pro_i2c_rtc = {
+ I2C_BOARD_INFO("rs5c372a", 0x32),
+};
+
+/*****************************************************************************
+ * SATA
+ ****************************************************************************/
+static struct mv_sata_platform_data kurobox_pro_sata_data = {
+ .n_ports = 2,
+};
+
+/*****************************************************************************
+ * Kurobox Pro specific power off method via UART1-attached microcontroller
+ ****************************************************************************/
+
+#define UART1_REG(x) (UART1_VIRT_BASE + ((UART_##x) << 2))
+
+static int kurobox_pro_miconread(unsigned char *buf, int count)
+{
+ int i;
+ int timeout;
+
+ for (i = 0; i < count; i++) {
+ timeout = 10;
+
+ while (!(readl(UART1_REG(LSR)) & UART_LSR_DR)) {
+ if (--timeout == 0)
+ break;
+ udelay(1000);
+ }
+
+ if (timeout == 0)
+ break;
+ buf[i] = readl(UART1_REG(RX));
+ }
+
+ /* return read bytes */
+ return i;
+}
+
+static int kurobox_pro_miconwrite(const unsigned char *buf, int count)
+{
+ int i = 0;
+
+ while (count--) {
+ while (!(readl(UART1_REG(LSR)) & UART_LSR_THRE))
+ barrier();
+ writel(buf[i++], UART1_REG(TX));
+ }
+
+ return 0;
+}
+
+static int kurobox_pro_miconsend(const unsigned char *data, int count)
+{
+ int i;
+ unsigned char checksum = 0;
+ unsigned char recv_buf[40];
+ unsigned char send_buf[40];
+ unsigned char correct_ack[3];
+ int retry = 2;
+
+ /* Generate checksum */
+ for (i = 0; i < count; i++)
+ checksum -= data[i];
+
+ do {
+ /* Send data */
+ kurobox_pro_miconwrite(data, count);
+
+ /* send checksum */
+ kurobox_pro_miconwrite(&checksum, 1);
+
+ if (kurobox_pro_miconread(recv_buf, sizeof(recv_buf)) <= 3) {
+ printk(KERN_ERR ">%s: receive failed.\n", __func__);
+
+ /* send preamble to clear the receive buffer */
+ memset(&send_buf, 0xff, sizeof(send_buf));
+ kurobox_pro_miconwrite(send_buf, sizeof(send_buf));
+
+ /* make dummy reads */
+ mdelay(100);
+ kurobox_pro_miconread(recv_buf, sizeof(recv_buf));
+ } else {
+ /* Generate expected ack */
+ correct_ack[0] = 0x01;
+ correct_ack[1] = data[1];
+ correct_ack[2] = 0x00;
+
+ /* checksum Check */
+ if ((recv_buf[0] + recv_buf[1] + recv_buf[2] +
+ recv_buf[3]) & 0xFF) {
+ printk(KERN_ERR ">%s: Checksum Error : "
+ "Received data[%02x, %02x, %02x, %02x]"
+ "\n", __func__, recv_buf[0],
+ recv_buf[1], recv_buf[2], recv_buf[3]);
+ } else {
+ /* Check Received Data */
+ if (correct_ack[0] == recv_buf[0] &&
+ correct_ack[1] == recv_buf[1] &&
+ correct_ack[2] == recv_buf[2]) {
+ /* Interval for next command */
+ mdelay(10);
+
+ /* Receive ACK */
+ return 0;
+ }
+ }
+ /* Received NAK or illegal Data */
+ printk(KERN_ERR ">%s: Error : NAK or Illegal Data "
+ "Received\n", __func__);
+ }
+ } while (retry--);
+
+ /* Interval for next command */
+ mdelay(10);
+
+ return -1;
+}
+
+static void kurobox_pro_power_off(void)
+{
+ const unsigned char watchdogkill[] = {0x01, 0x35, 0x00};
+ const unsigned char shutdownwait[] = {0x00, 0x0c};
+ const unsigned char poweroff[] = {0x00, 0x06};
+ /* 38400 baud divisor */
+ const unsigned divisor = ((orion5x_tclk + (8 * 38400)) / (16 * 38400));
+
+ pr_info("%s: triggering power-off...\n", __func__);
+
+ /* hijack uart1 and reset into sane state (38400,8n1,even parity) */
+ writel(0x83, UART1_REG(LCR));
+ writel(divisor & 0xff, UART1_REG(DLL));
+ writel((divisor >> 8) & 0xff, UART1_REG(DLM));
+ writel(0x1b, UART1_REG(LCR));
+ writel(0x00, UART1_REG(IER));
+ writel(0x07, UART1_REG(FCR));
+ writel(0x00, UART1_REG(MCR));
+
+ /* Send the commands to shutdown the Kurobox Pro */
+ kurobox_pro_miconsend(watchdogkill, sizeof(watchdogkill)) ;
+ kurobox_pro_miconsend(shutdownwait, sizeof(shutdownwait)) ;
+ kurobox_pro_miconsend(poweroff, sizeof(poweroff));
+}
+
+/*****************************************************************************
+ * General Setup
+ ****************************************************************************/
+static unsigned int kurobox_pro_mpp_modes[] __initdata = {
+ MPP0_UNUSED,
+ MPP1_UNUSED,
+ MPP2_GPIO, /* GPIO Micon */
+ MPP3_GPIO, /* GPIO Rtc */
+ MPP4_UNUSED,
+ MPP5_UNUSED,
+ MPP6_NAND, /* NAND Flash REn */
+ MPP7_NAND, /* NAND Flash WEn */
+ MPP8_UNUSED,
+ MPP9_UNUSED,
+ MPP10_UNUSED,
+ MPP11_UNUSED,
+ MPP12_SATA_LED, /* SATA 0 presence */
+ MPP13_SATA_LED, /* SATA 1 presence */
+ MPP14_SATA_LED, /* SATA 0 active */
+ MPP15_SATA_LED, /* SATA 1 active */
+ MPP16_UART, /* UART1 RXD */
+ MPP17_UART, /* UART1 TXD */
+ MPP18_UART, /* UART1 CTSn */
+ MPP19_UART, /* UART1 RTSn */
+ 0,
+};
+
+static void __init kurobox_pro_init(void)
+{
+ /*
+ * Setup basic Orion functions. Need to be called early.
+ */
+ orion5x_init();
+
+ orion5x_mpp_conf(kurobox_pro_mpp_modes);
+
+ /*
+ * Configure peripherals.
+ */
+ orion5x_ehci0_init();
+ orion5x_ehci1_init();
+ orion5x_eth_init(&kurobox_pro_eth_data);
+ orion5x_i2c_init();
+ orion5x_sata_init(&kurobox_pro_sata_data);
+ orion5x_uart0_init();
+ orion5x_uart1_init();
+ orion5x_xor_init();
+
+ mvebu_mbus_add_window_by_id(ORION_MBUS_DEVBUS_BOOT_TARGET,
+ ORION_MBUS_DEVBUS_BOOT_ATTR,
+ KUROBOX_PRO_NOR_BOOT_BASE,
+ KUROBOX_PRO_NOR_BOOT_SIZE);
+ platform_device_register(&kurobox_pro_nor_flash);
+
+ if (machine_is_kurobox_pro()) {
+ mvebu_mbus_add_window_by_id(ORION_MBUS_DEVBUS_TARGET(0),
+ ORION_MBUS_DEVBUS_ATTR(0),
+ KUROBOX_PRO_NAND_BASE,
+ KUROBOX_PRO_NAND_SIZE);
+ platform_device_register(&kurobox_pro_nand_flash);
+ }
+
+ i2c_register_board_info(0, &kurobox_pro_i2c_rtc, 1);
+
+ /* register Kurobox Pro specific power-off method */
+ pm_power_off = kurobox_pro_power_off;
+}
+
+#ifdef CONFIG_MACH_KUROBOX_PRO
+MACHINE_START(KUROBOX_PRO, "Buffalo/Revogear Kurobox Pro")
+ /* Maintainer: Ronen Shitrit <rshitrit@marvell.com> */
+ .atag_offset = 0x100,
+ .init_machine = kurobox_pro_init,
+ .map_io = orion5x_map_io,
+ .init_early = orion5x_init_early,
+ .init_irq = orion5x_init_irq,
+ .init_time = orion5x_timer_init,
+ .fixup = tag_fixup_mem32,
+ .restart = orion5x_restart,
+MACHINE_END
+#endif
+
+#ifdef CONFIG_MACH_LINKSTATION_PRO
+MACHINE_START(LINKSTATION_PRO, "Buffalo Linkstation Pro/Live")
+ /* Maintainer: Byron Bradley <byron.bbradley@gmail.com> */
+ .atag_offset = 0x100,
+ .init_machine = kurobox_pro_init,
+ .map_io = orion5x_map_io,
+ .init_early = orion5x_init_early,
+ .init_irq = orion5x_init_irq,
+ .init_time = orion5x_timer_init,
+ .fixup = tag_fixup_mem32,
+ .restart = orion5x_restart,
+MACHINE_END
+#endif