1 files changed, 154 insertions, 0 deletions

diff --git a/kernel/arch/arm/mach-omap2/omap_phy_internal.c b/kernel/arch/arm/mach-omap2/omap_phy_internal.c
new file mode 100644
index 000000000..8e903564e
--- /dev/null
+++ b/kernel/arch/arm/mach-omap2/omap_phy_internal.c
@@ -0,0 +1,154 @@
+/*
+  * This file configures the internal USB PHY in OMAP4430. Used
+  * with TWL6030 transceiver and MUSB on OMAP4430.
+  *
+  * Copyright (C) 2010 Texas Instruments Incorporated - http://www.ti.com
+  * This program is free software; you can redistribute it and/or modify
+  * it under the terms of the GNU General Public License as published by
+  * the Free Software Foundation; either version 2 of the License, or
+  * (at your option) any later version.
+  *
+  * Author: Hema HK <hemahk@ti.com>
+  *
+  * This program is distributed in the hope that it will be useful,
+  * but WITHOUT ANY WARRANTY; without even the implied warranty of
+  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+  * GNU General Public License for more details.
+  *
+  * You should have received a copy of the GNU General Public License
+  * along with this program; if not, write to the Free Software
+  * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+  *
+  */
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
+#include <linux/types.h>
+#include <linux/delay.h>
+#include <linux/clk.h>
+#include <linux/io.h>
+#include <linux/err.h>
+#include <linux/usb.h>
+#include <linux/usb/musb.h>
+
+#include "soc.h"
+#include "control.h"
+#include "usb.h"
+
+#define CONTROL_DEV_CONF		0x300
+#define PHY_PD				0x1
+
+/**
+ * omap4430_phy_power_down: disable MUSB PHY during early init
+ *
+ * OMAP4 MUSB PHY module is enabled by default on reset, but this will
+ * prevent core retention if not disabled by SW. USB driver will
+ * later on enable this, once and if the driver needs it.
+ */
+static int __init omap4430_phy_power_down(void)
+{
+	void __iomem *ctrl_base;
+
+	if (!cpu_is_omap44xx())
+		return 0;
+
+	ctrl_base = ioremap(OMAP443X_SCM_BASE, SZ_1K);
+	if (!ctrl_base) {
+		pr_err("control module ioremap failed\n");
+		return -ENOMEM;
+	}
+
+	/* Power down the phy */
+	writel_relaxed(PHY_PD, ctrl_base + CONTROL_DEV_CONF);
+
+	iounmap(ctrl_base);
+
+	return 0;
+}
+omap_early_initcall(omap4430_phy_power_down);
+
+void am35x_musb_reset(void)
+{
+	u32	regval;
+
+	/* Reset the musb interface */
+	regval = omap_ctrl_readl(AM35XX_CONTROL_IP_SW_RESET);
+
+	regval |= AM35XX_USBOTGSS_SW_RST;
+	omap_ctrl_writel(regval, AM35XX_CONTROL_IP_SW_RESET);
+
+	regval &= ~AM35XX_USBOTGSS_SW_RST;
+	omap_ctrl_writel(regval, AM35XX_CONTROL_IP_SW_RESET);
+
+	regval = omap_ctrl_readl(AM35XX_CONTROL_IP_SW_RESET);
+}
+
+void am35x_musb_phy_power(u8 on)
+{
+	unsigned long timeout = jiffies + msecs_to_jiffies(100);
+	u32 devconf2;
+
+	if (on) {
+		/*
+		 * Start the on-chip PHY and its PLL.
+		 */
+		devconf2 = omap_ctrl_readl(AM35XX_CONTROL_DEVCONF2);
+
+		devconf2 &= ~(CONF2_RESET | CONF2_PHYPWRDN | CONF2_OTGPWRDN);
+		devconf2 |= CONF2_PHY_PLLON;
+
+		omap_ctrl_writel(devconf2, AM35XX_CONTROL_DEVCONF2);
+
+		pr_info("Waiting for PHY clock good...\n");
+		while (!(omap_ctrl_readl(AM35XX_CONTROL_DEVCONF2)
+				& CONF2_PHYCLKGD)) {
+			cpu_relax();
+
+			if (time_after(jiffies, timeout)) {
+				pr_err("musb PHY clock good timed out\n");
+				break;
+			}
+		}
+	} else {
+		/*
+		 * Power down the on-chip PHY.
+		 */
+		devconf2 = omap_ctrl_readl(AM35XX_CONTROL_DEVCONF2);
+
+		devconf2 &= ~CONF2_PHY_PLLON;
+		devconf2 |=  CONF2_PHYPWRDN | CONF2_OTGPWRDN;
+		omap_ctrl_writel(devconf2, AM35XX_CONTROL_DEVCONF2);
+	}
+}
+
+void am35x_musb_clear_irq(void)
+{
+	u32 regval;
+
+	regval = omap_ctrl_readl(AM35XX_CONTROL_LVL_INTR_CLEAR);
+	regval |= AM35XX_USBOTGSS_INT_CLR;
+	omap_ctrl_writel(regval, AM35XX_CONTROL_LVL_INTR_CLEAR);
+	regval = omap_ctrl_readl(AM35XX_CONTROL_LVL_INTR_CLEAR);
+}
+
+void am35x_set_mode(u8 musb_mode)
+{
+	u32 devconf2 = omap_ctrl_readl(AM35XX_CONTROL_DEVCONF2);
+
+	devconf2 &= ~CONF2_OTGMODE;
+	switch (musb_mode) {
+	case MUSB_HOST:		/* Force VBUS valid, ID = 0 */
+		devconf2 |= CONF2_FORCE_HOST;
+		break;
+	case MUSB_PERIPHERAL:	/* Force VBUS valid, ID = 1 */
+		devconf2 |= CONF2_FORCE_DEVICE;
+		break;
+	case MUSB_OTG:		/* Don't override the VBUS/ID comparators */
+		devconf2 |= CONF2_NO_OVERRIDE;
+		break;
+	default:
+		pr_info("Unsupported mode %u\n", musb_mode);
+	}
+
+	omap_ctrl_writel(devconf2, AM35XX_CONTROL_DEVCONF2);
+}