summaryrefslogtreecommitdiffstats
path: root/kernel/arch/arm/mach-omap2/control.c
diff options
context:
space:
mode:
Diffstat (limited to 'kernel/arch/arm/mach-omap2/control.c')
-rw-r--r--kernel/arch/arm/mach-omap2/control.c748
1 files changed, 748 insertions, 0 deletions
diff --git a/kernel/arch/arm/mach-omap2/control.c b/kernel/arch/arm/mach-omap2/control.c
new file mode 100644
index 000000000..af95a624f
--- /dev/null
+++ b/kernel/arch/arm/mach-omap2/control.c
@@ -0,0 +1,748 @@
+/*
+ * OMAP2/3 System Control Module register access
+ *
+ * Copyright (C) 2007, 2012 Texas Instruments, Inc.
+ * Copyright (C) 2007 Nokia Corporation
+ *
+ * Written by Paul Walmsley
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#undef DEBUG
+
+#include <linux/kernel.h>
+#include <linux/io.h>
+#include <linux/of_address.h>
+#include <linux/regmap.h>
+#include <linux/mfd/syscon.h>
+
+#include "soc.h"
+#include "iomap.h"
+#include "common.h"
+#include "cm-regbits-34xx.h"
+#include "prm-regbits-34xx.h"
+#include "prm3xxx.h"
+#include "cm3xxx.h"
+#include "sdrc.h"
+#include "pm.h"
+#include "control.h"
+#include "clock.h"
+
+/* Used by omap3_ctrl_save_padconf() */
+#define START_PADCONF_SAVE 0x2
+#define PADCONF_SAVE_DONE 0x1
+
+static void __iomem *omap2_ctrl_base;
+static s16 omap2_ctrl_offset;
+static struct regmap *omap2_ctrl_syscon;
+
+#if defined(CONFIG_ARCH_OMAP3) && defined(CONFIG_PM)
+struct omap3_scratchpad {
+ u32 boot_config_ptr;
+ u32 public_restore_ptr;
+ u32 secure_ram_restore_ptr;
+ u32 sdrc_module_semaphore;
+ u32 prcm_block_offset;
+ u32 sdrc_block_offset;
+};
+
+struct omap3_scratchpad_prcm_block {
+ u32 prm_contents[2];
+ u32 cm_contents[11];
+ u32 prcm_block_size;
+};
+
+struct omap3_scratchpad_sdrc_block {
+ u16 sysconfig;
+ u16 cs_cfg;
+ u16 sharing;
+ u16 err_type;
+ u32 dll_a_ctrl;
+ u32 dll_b_ctrl;
+ u32 power;
+ u32 cs_0;
+ u32 mcfg_0;
+ u16 mr_0;
+ u16 emr_1_0;
+ u16 emr_2_0;
+ u16 emr_3_0;
+ u32 actim_ctrla_0;
+ u32 actim_ctrlb_0;
+ u32 rfr_ctrl_0;
+ u32 cs_1;
+ u32 mcfg_1;
+ u16 mr_1;
+ u16 emr_1_1;
+ u16 emr_2_1;
+ u16 emr_3_1;
+ u32 actim_ctrla_1;
+ u32 actim_ctrlb_1;
+ u32 rfr_ctrl_1;
+ u16 dcdl_1_ctrl;
+ u16 dcdl_2_ctrl;
+ u32 flags;
+ u32 block_size;
+};
+
+void *omap3_secure_ram_storage;
+
+/*
+ * This is used to store ARM registers in SDRAM before attempting
+ * an MPU OFF. The save and restore happens from the SRAM sleep code.
+ * The address is stored in scratchpad, so that it can be used
+ * during the restore path.
+ */
+u32 omap3_arm_context[128];
+
+struct omap3_control_regs {
+ u32 sysconfig;
+ u32 devconf0;
+ u32 mem_dftrw0;
+ u32 mem_dftrw1;
+ u32 msuspendmux_0;
+ u32 msuspendmux_1;
+ u32 msuspendmux_2;
+ u32 msuspendmux_3;
+ u32 msuspendmux_4;
+ u32 msuspendmux_5;
+ u32 sec_ctrl;
+ u32 devconf1;
+ u32 csirxfe;
+ u32 iva2_bootaddr;
+ u32 iva2_bootmod;
+ u32 debobs_0;
+ u32 debobs_1;
+ u32 debobs_2;
+ u32 debobs_3;
+ u32 debobs_4;
+ u32 debobs_5;
+ u32 debobs_6;
+ u32 debobs_7;
+ u32 debobs_8;
+ u32 prog_io0;
+ u32 prog_io1;
+ u32 dss_dpll_spreading;
+ u32 core_dpll_spreading;
+ u32 per_dpll_spreading;
+ u32 usbhost_dpll_spreading;
+ u32 pbias_lite;
+ u32 temp_sensor;
+ u32 sramldo4;
+ u32 sramldo5;
+ u32 csi;
+ u32 padconf_sys_nirq;
+};
+
+static struct omap3_control_regs control_context;
+#endif /* CONFIG_ARCH_OMAP3 && CONFIG_PM */
+
+void __init omap2_set_globals_control(void __iomem *ctrl)
+{
+ omap2_ctrl_base = ctrl;
+}
+
+u8 omap_ctrl_readb(u16 offset)
+{
+ u32 val;
+ u8 byte_offset = offset & 0x3;
+
+ val = omap_ctrl_readl(offset);
+
+ return (val >> (byte_offset * 8)) & 0xff;
+}
+
+u16 omap_ctrl_readw(u16 offset)
+{
+ u32 val;
+ u16 byte_offset = offset & 0x2;
+
+ val = omap_ctrl_readl(offset);
+
+ return (val >> (byte_offset * 8)) & 0xffff;
+}
+
+u32 omap_ctrl_readl(u16 offset)
+{
+ u32 val;
+
+ offset &= 0xfffc;
+ if (!omap2_ctrl_syscon)
+ val = readl_relaxed(omap2_ctrl_base + offset);
+ else
+ regmap_read(omap2_ctrl_syscon, omap2_ctrl_offset + offset,
+ &val);
+
+ return val;
+}
+
+void omap_ctrl_writeb(u8 val, u16 offset)
+{
+ u32 tmp;
+ u8 byte_offset = offset & 0x3;
+
+ tmp = omap_ctrl_readl(offset);
+
+ tmp &= 0xffffffff ^ (0xff << (byte_offset * 8));
+ tmp |= val << (byte_offset * 8);
+
+ omap_ctrl_writel(tmp, offset);
+}
+
+void omap_ctrl_writew(u16 val, u16 offset)
+{
+ u32 tmp;
+ u8 byte_offset = offset & 0x2;
+
+ tmp = omap_ctrl_readl(offset);
+
+ tmp &= 0xffffffff ^ (0xffff << (byte_offset * 8));
+ tmp |= val << (byte_offset * 8);
+
+ omap_ctrl_writel(tmp, offset);
+}
+
+void omap_ctrl_writel(u32 val, u16 offset)
+{
+ offset &= 0xfffc;
+ if (!omap2_ctrl_syscon)
+ writel_relaxed(val, omap2_ctrl_base + offset);
+ else
+ regmap_write(omap2_ctrl_syscon, omap2_ctrl_offset + offset,
+ val);
+}
+
+#ifdef CONFIG_ARCH_OMAP3
+
+/**
+ * omap3_ctrl_write_boot_mode - set scratchpad boot mode for the next boot
+ * @bootmode: 8-bit value to pass to some boot code
+ *
+ * Set the bootmode in the scratchpad RAM. This is used after the
+ * system restarts. Not sure what actually uses this - it may be the
+ * bootloader, rather than the boot ROM - contrary to the preserved
+ * comment below. No return value.
+ */
+void omap3_ctrl_write_boot_mode(u8 bootmode)
+{
+ u32 l;
+
+ l = ('B' << 24) | ('M' << 16) | bootmode;
+
+ /*
+ * Reserve the first word in scratchpad for communicating
+ * with the boot ROM. A pointer to a data structure
+ * describing the boot process can be stored there,
+ * cf. OMAP34xx TRM, Initialization / Software Booting
+ * Configuration.
+ *
+ * XXX This should use some omap_ctrl_writel()-type function
+ */
+ writel_relaxed(l, OMAP2_L4_IO_ADDRESS(OMAP343X_SCRATCHPAD + 4));
+}
+
+#endif
+
+/**
+ * omap_ctrl_write_dsp_boot_addr - set boot address for a remote processor
+ * @bootaddr: physical address of the boot loader
+ *
+ * Set boot address for the boot loader of a supported processor
+ * when a power ON sequence occurs.
+ */
+void omap_ctrl_write_dsp_boot_addr(u32 bootaddr)
+{
+ u32 offset = cpu_is_omap243x() ? OMAP243X_CONTROL_IVA2_BOOTADDR :
+ cpu_is_omap34xx() ? OMAP343X_CONTROL_IVA2_BOOTADDR :
+ cpu_is_omap44xx() ? OMAP4_CTRL_MODULE_CORE_DSP_BOOTADDR :
+ soc_is_omap54xx() ? OMAP4_CTRL_MODULE_CORE_DSP_BOOTADDR :
+ 0;
+
+ if (!offset) {
+ pr_err("%s: unsupported omap type\n", __func__);
+ return;
+ }
+
+ omap_ctrl_writel(bootaddr, offset);
+}
+
+/**
+ * omap_ctrl_write_dsp_boot_mode - set boot mode for a remote processor
+ * @bootmode: 8-bit value to pass to some boot code
+ *
+ * Sets boot mode for the boot loader of a supported processor
+ * when a power ON sequence occurs.
+ */
+void omap_ctrl_write_dsp_boot_mode(u8 bootmode)
+{
+ u32 offset = cpu_is_omap243x() ? OMAP243X_CONTROL_IVA2_BOOTMOD :
+ cpu_is_omap34xx() ? OMAP343X_CONTROL_IVA2_BOOTMOD :
+ 0;
+
+ if (!offset) {
+ pr_err("%s: unsupported omap type\n", __func__);
+ return;
+ }
+
+ omap_ctrl_writel(bootmode, offset);
+}
+
+#if defined(CONFIG_ARCH_OMAP3) && defined(CONFIG_PM)
+/*
+ * Clears the scratchpad contents in case of cold boot-
+ * called during bootup
+ */
+void omap3_clear_scratchpad_contents(void)
+{
+ u32 max_offset = OMAP343X_SCRATCHPAD_ROM_OFFSET;
+ void __iomem *v_addr;
+ u32 offset = 0;
+
+ v_addr = OMAP2_L4_IO_ADDRESS(OMAP343X_SCRATCHPAD_ROM);
+ if (omap3xxx_prm_clear_global_cold_reset()) {
+ for ( ; offset <= max_offset; offset += 0x4)
+ writel_relaxed(0x0, (v_addr + offset));
+ }
+}
+
+/* Populate the scratchpad structure with restore structure */
+void omap3_save_scratchpad_contents(void)
+{
+ void __iomem *scratchpad_address;
+ u32 arm_context_addr;
+ struct omap3_scratchpad scratchpad_contents;
+ struct omap3_scratchpad_prcm_block prcm_block_contents;
+ struct omap3_scratchpad_sdrc_block sdrc_block_contents;
+
+ /*
+ * Populate the Scratchpad contents
+ *
+ * The "get_*restore_pointer" functions are used to provide a
+ * physical restore address where the ROM code jumps while waking
+ * up from MPU OFF/OSWR state.
+ * The restore pointer is stored into the scratchpad.
+ */
+ scratchpad_contents.boot_config_ptr = 0x0;
+ if (cpu_is_omap3630())
+ scratchpad_contents.public_restore_ptr =
+ virt_to_phys(omap3_restore_3630);
+ else if (omap_rev() != OMAP3430_REV_ES3_0 &&
+ omap_rev() != OMAP3430_REV_ES3_1 &&
+ omap_rev() != OMAP3430_REV_ES3_1_2)
+ scratchpad_contents.public_restore_ptr =
+ virt_to_phys(omap3_restore);
+ else
+ scratchpad_contents.public_restore_ptr =
+ virt_to_phys(omap3_restore_es3);
+
+ if (omap_type() == OMAP2_DEVICE_TYPE_GP)
+ scratchpad_contents.secure_ram_restore_ptr = 0x0;
+ else
+ scratchpad_contents.secure_ram_restore_ptr =
+ (u32) __pa(omap3_secure_ram_storage);
+ scratchpad_contents.sdrc_module_semaphore = 0x0;
+ scratchpad_contents.prcm_block_offset = 0x2C;
+ scratchpad_contents.sdrc_block_offset = 0x64;
+
+ /* Populate the PRCM block contents */
+ omap3_prm_save_scratchpad_contents(prcm_block_contents.prm_contents);
+ omap3_cm_save_scratchpad_contents(prcm_block_contents.cm_contents);
+
+ prcm_block_contents.prcm_block_size = 0x0;
+
+ /* Populate the SDRC block contents */
+ sdrc_block_contents.sysconfig =
+ (sdrc_read_reg(SDRC_SYSCONFIG) & 0xFFFF);
+ sdrc_block_contents.cs_cfg =
+ (sdrc_read_reg(SDRC_CS_CFG) & 0xFFFF);
+ sdrc_block_contents.sharing =
+ (sdrc_read_reg(SDRC_SHARING) & 0xFFFF);
+ sdrc_block_contents.err_type =
+ (sdrc_read_reg(SDRC_ERR_TYPE) & 0xFFFF);
+ sdrc_block_contents.dll_a_ctrl = sdrc_read_reg(SDRC_DLLA_CTRL);
+ sdrc_block_contents.dll_b_ctrl = 0x0;
+ /*
+ * Due to a OMAP3 errata (1.142), on EMU/HS devices SRDC should
+ * be programed to issue automatic self refresh on timeout
+ * of AUTO_CNT = 1 prior to any transition to OFF mode.
+ */
+ if ((omap_type() != OMAP2_DEVICE_TYPE_GP)
+ && (omap_rev() >= OMAP3430_REV_ES3_0))
+ sdrc_block_contents.power = (sdrc_read_reg(SDRC_POWER) &
+ ~(SDRC_POWER_AUTOCOUNT_MASK|
+ SDRC_POWER_CLKCTRL_MASK)) |
+ (1 << SDRC_POWER_AUTOCOUNT_SHIFT) |
+ SDRC_SELF_REFRESH_ON_AUTOCOUNT;
+ else
+ sdrc_block_contents.power = sdrc_read_reg(SDRC_POWER);
+
+ sdrc_block_contents.cs_0 = 0x0;
+ sdrc_block_contents.mcfg_0 = sdrc_read_reg(SDRC_MCFG_0);
+ sdrc_block_contents.mr_0 = (sdrc_read_reg(SDRC_MR_0) & 0xFFFF);
+ sdrc_block_contents.emr_1_0 = 0x0;
+ sdrc_block_contents.emr_2_0 = 0x0;
+ sdrc_block_contents.emr_3_0 = 0x0;
+ sdrc_block_contents.actim_ctrla_0 =
+ sdrc_read_reg(SDRC_ACTIM_CTRL_A_0);
+ sdrc_block_contents.actim_ctrlb_0 =
+ sdrc_read_reg(SDRC_ACTIM_CTRL_B_0);
+ sdrc_block_contents.rfr_ctrl_0 =
+ sdrc_read_reg(SDRC_RFR_CTRL_0);
+ sdrc_block_contents.cs_1 = 0x0;
+ sdrc_block_contents.mcfg_1 = sdrc_read_reg(SDRC_MCFG_1);
+ sdrc_block_contents.mr_1 = sdrc_read_reg(SDRC_MR_1) & 0xFFFF;
+ sdrc_block_contents.emr_1_1 = 0x0;
+ sdrc_block_contents.emr_2_1 = 0x0;
+ sdrc_block_contents.emr_3_1 = 0x0;
+ sdrc_block_contents.actim_ctrla_1 =
+ sdrc_read_reg(SDRC_ACTIM_CTRL_A_1);
+ sdrc_block_contents.actim_ctrlb_1 =
+ sdrc_read_reg(SDRC_ACTIM_CTRL_B_1);
+ sdrc_block_contents.rfr_ctrl_1 =
+ sdrc_read_reg(SDRC_RFR_CTRL_1);
+ sdrc_block_contents.dcdl_1_ctrl = 0x0;
+ sdrc_block_contents.dcdl_2_ctrl = 0x0;
+ sdrc_block_contents.flags = 0x0;
+ sdrc_block_contents.block_size = 0x0;
+
+ arm_context_addr = virt_to_phys(omap3_arm_context);
+
+ /* Copy all the contents to the scratchpad location */
+ scratchpad_address = OMAP2_L4_IO_ADDRESS(OMAP343X_SCRATCHPAD);
+ memcpy_toio(scratchpad_address, &scratchpad_contents,
+ sizeof(scratchpad_contents));
+ /* Scratchpad contents being 32 bits, a divide by 4 done here */
+ memcpy_toio(scratchpad_address +
+ scratchpad_contents.prcm_block_offset,
+ &prcm_block_contents, sizeof(prcm_block_contents));
+ memcpy_toio(scratchpad_address +
+ scratchpad_contents.sdrc_block_offset,
+ &sdrc_block_contents, sizeof(sdrc_block_contents));
+ /*
+ * Copies the address of the location in SDRAM where ARM
+ * registers get saved during a MPU OFF transition.
+ */
+ memcpy_toio(scratchpad_address +
+ scratchpad_contents.sdrc_block_offset +
+ sizeof(sdrc_block_contents), &arm_context_addr, 4);
+}
+
+void omap3_control_save_context(void)
+{
+ control_context.sysconfig = omap_ctrl_readl(OMAP2_CONTROL_SYSCONFIG);
+ control_context.devconf0 = omap_ctrl_readl(OMAP2_CONTROL_DEVCONF0);
+ control_context.mem_dftrw0 =
+ omap_ctrl_readl(OMAP343X_CONTROL_MEM_DFTRW0);
+ control_context.mem_dftrw1 =
+ omap_ctrl_readl(OMAP343X_CONTROL_MEM_DFTRW1);
+ control_context.msuspendmux_0 =
+ omap_ctrl_readl(OMAP2_CONTROL_MSUSPENDMUX_0);
+ control_context.msuspendmux_1 =
+ omap_ctrl_readl(OMAP2_CONTROL_MSUSPENDMUX_1);
+ control_context.msuspendmux_2 =
+ omap_ctrl_readl(OMAP2_CONTROL_MSUSPENDMUX_2);
+ control_context.msuspendmux_3 =
+ omap_ctrl_readl(OMAP2_CONTROL_MSUSPENDMUX_3);
+ control_context.msuspendmux_4 =
+ omap_ctrl_readl(OMAP2_CONTROL_MSUSPENDMUX_4);
+ control_context.msuspendmux_5 =
+ omap_ctrl_readl(OMAP2_CONTROL_MSUSPENDMUX_5);
+ control_context.sec_ctrl = omap_ctrl_readl(OMAP2_CONTROL_SEC_CTRL);
+ control_context.devconf1 = omap_ctrl_readl(OMAP343X_CONTROL_DEVCONF1);
+ control_context.csirxfe = omap_ctrl_readl(OMAP343X_CONTROL_CSIRXFE);
+ control_context.iva2_bootaddr =
+ omap_ctrl_readl(OMAP343X_CONTROL_IVA2_BOOTADDR);
+ control_context.iva2_bootmod =
+ omap_ctrl_readl(OMAP343X_CONTROL_IVA2_BOOTMOD);
+ control_context.debobs_0 = omap_ctrl_readl(OMAP343X_CONTROL_DEBOBS(0));
+ control_context.debobs_1 = omap_ctrl_readl(OMAP343X_CONTROL_DEBOBS(1));
+ control_context.debobs_2 = omap_ctrl_readl(OMAP343X_CONTROL_DEBOBS(2));
+ control_context.debobs_3 = omap_ctrl_readl(OMAP343X_CONTROL_DEBOBS(3));
+ control_context.debobs_4 = omap_ctrl_readl(OMAP343X_CONTROL_DEBOBS(4));
+ control_context.debobs_5 = omap_ctrl_readl(OMAP343X_CONTROL_DEBOBS(5));
+ control_context.debobs_6 = omap_ctrl_readl(OMAP343X_CONTROL_DEBOBS(6));
+ control_context.debobs_7 = omap_ctrl_readl(OMAP343X_CONTROL_DEBOBS(7));
+ control_context.debobs_8 = omap_ctrl_readl(OMAP343X_CONTROL_DEBOBS(8));
+ control_context.prog_io0 = omap_ctrl_readl(OMAP343X_CONTROL_PROG_IO0);
+ control_context.prog_io1 = omap_ctrl_readl(OMAP343X_CONTROL_PROG_IO1);
+ control_context.dss_dpll_spreading =
+ omap_ctrl_readl(OMAP343X_CONTROL_DSS_DPLL_SPREADING);
+ control_context.core_dpll_spreading =
+ omap_ctrl_readl(OMAP343X_CONTROL_CORE_DPLL_SPREADING);
+ control_context.per_dpll_spreading =
+ omap_ctrl_readl(OMAP343X_CONTROL_PER_DPLL_SPREADING);
+ control_context.usbhost_dpll_spreading =
+ omap_ctrl_readl(OMAP343X_CONTROL_USBHOST_DPLL_SPREADING);
+ control_context.pbias_lite =
+ omap_ctrl_readl(OMAP343X_CONTROL_PBIAS_LITE);
+ control_context.temp_sensor =
+ omap_ctrl_readl(OMAP343X_CONTROL_TEMP_SENSOR);
+ control_context.sramldo4 = omap_ctrl_readl(OMAP343X_CONTROL_SRAMLDO4);
+ control_context.sramldo5 = omap_ctrl_readl(OMAP343X_CONTROL_SRAMLDO5);
+ control_context.csi = omap_ctrl_readl(OMAP343X_CONTROL_CSI);
+ control_context.padconf_sys_nirq =
+ omap_ctrl_readl(OMAP343X_CONTROL_PADCONF_SYSNIRQ);
+}
+
+void omap3_control_restore_context(void)
+{
+ omap_ctrl_writel(control_context.sysconfig, OMAP2_CONTROL_SYSCONFIG);
+ omap_ctrl_writel(control_context.devconf0, OMAP2_CONTROL_DEVCONF0);
+ omap_ctrl_writel(control_context.mem_dftrw0,
+ OMAP343X_CONTROL_MEM_DFTRW0);
+ omap_ctrl_writel(control_context.mem_dftrw1,
+ OMAP343X_CONTROL_MEM_DFTRW1);
+ omap_ctrl_writel(control_context.msuspendmux_0,
+ OMAP2_CONTROL_MSUSPENDMUX_0);
+ omap_ctrl_writel(control_context.msuspendmux_1,
+ OMAP2_CONTROL_MSUSPENDMUX_1);
+ omap_ctrl_writel(control_context.msuspendmux_2,
+ OMAP2_CONTROL_MSUSPENDMUX_2);
+ omap_ctrl_writel(control_context.msuspendmux_3,
+ OMAP2_CONTROL_MSUSPENDMUX_3);
+ omap_ctrl_writel(control_context.msuspendmux_4,
+ OMAP2_CONTROL_MSUSPENDMUX_4);
+ omap_ctrl_writel(control_context.msuspendmux_5,
+ OMAP2_CONTROL_MSUSPENDMUX_5);
+ omap_ctrl_writel(control_context.sec_ctrl, OMAP2_CONTROL_SEC_CTRL);
+ omap_ctrl_writel(control_context.devconf1, OMAP343X_CONTROL_DEVCONF1);
+ omap_ctrl_writel(control_context.csirxfe, OMAP343X_CONTROL_CSIRXFE);
+ omap_ctrl_writel(control_context.iva2_bootaddr,
+ OMAP343X_CONTROL_IVA2_BOOTADDR);
+ omap_ctrl_writel(control_context.iva2_bootmod,
+ OMAP343X_CONTROL_IVA2_BOOTMOD);
+ omap_ctrl_writel(control_context.debobs_0, OMAP343X_CONTROL_DEBOBS(0));
+ omap_ctrl_writel(control_context.debobs_1, OMAP343X_CONTROL_DEBOBS(1));
+ omap_ctrl_writel(control_context.debobs_2, OMAP343X_CONTROL_DEBOBS(2));
+ omap_ctrl_writel(control_context.debobs_3, OMAP343X_CONTROL_DEBOBS(3));
+ omap_ctrl_writel(control_context.debobs_4, OMAP343X_CONTROL_DEBOBS(4));
+ omap_ctrl_writel(control_context.debobs_5, OMAP343X_CONTROL_DEBOBS(5));
+ omap_ctrl_writel(control_context.debobs_6, OMAP343X_CONTROL_DEBOBS(6));
+ omap_ctrl_writel(control_context.debobs_7, OMAP343X_CONTROL_DEBOBS(7));
+ omap_ctrl_writel(control_context.debobs_8, OMAP343X_CONTROL_DEBOBS(8));
+ omap_ctrl_writel(control_context.prog_io0, OMAP343X_CONTROL_PROG_IO0);
+ omap_ctrl_writel(control_context.prog_io1, OMAP343X_CONTROL_PROG_IO1);
+ omap_ctrl_writel(control_context.dss_dpll_spreading,
+ OMAP343X_CONTROL_DSS_DPLL_SPREADING);
+ omap_ctrl_writel(control_context.core_dpll_spreading,
+ OMAP343X_CONTROL_CORE_DPLL_SPREADING);
+ omap_ctrl_writel(control_context.per_dpll_spreading,
+ OMAP343X_CONTROL_PER_DPLL_SPREADING);
+ omap_ctrl_writel(control_context.usbhost_dpll_spreading,
+ OMAP343X_CONTROL_USBHOST_DPLL_SPREADING);
+ omap_ctrl_writel(control_context.pbias_lite,
+ OMAP343X_CONTROL_PBIAS_LITE);
+ omap_ctrl_writel(control_context.temp_sensor,
+ OMAP343X_CONTROL_TEMP_SENSOR);
+ omap_ctrl_writel(control_context.sramldo4, OMAP343X_CONTROL_SRAMLDO4);
+ omap_ctrl_writel(control_context.sramldo5, OMAP343X_CONTROL_SRAMLDO5);
+ omap_ctrl_writel(control_context.csi, OMAP343X_CONTROL_CSI);
+ omap_ctrl_writel(control_context.padconf_sys_nirq,
+ OMAP343X_CONTROL_PADCONF_SYSNIRQ);
+}
+
+void omap3630_ctrl_disable_rta(void)
+{
+ if (!cpu_is_omap3630())
+ return;
+ omap_ctrl_writel(OMAP36XX_RTA_DISABLE, OMAP36XX_CONTROL_MEM_RTA_CTRL);
+}
+
+/**
+ * omap3_ctrl_save_padconf - save padconf registers to scratchpad RAM
+ *
+ * Tell the SCM to start saving the padconf registers, then wait for
+ * the process to complete. Returns 0 unconditionally, although it
+ * should also eventually be able to return -ETIMEDOUT, if the save
+ * does not complete.
+ *
+ * XXX This function is missing a timeout. What should it be?
+ */
+int omap3_ctrl_save_padconf(void)
+{
+ u32 cpo;
+
+ /* Save the padconf registers */
+ cpo = omap_ctrl_readl(OMAP343X_CONTROL_PADCONF_OFF);
+ cpo |= START_PADCONF_SAVE;
+ omap_ctrl_writel(cpo, OMAP343X_CONTROL_PADCONF_OFF);
+
+ /* wait for the save to complete */
+ while (!(omap_ctrl_readl(OMAP343X_CONTROL_GENERAL_PURPOSE_STATUS)
+ & PADCONF_SAVE_DONE))
+ udelay(1);
+
+ return 0;
+}
+
+/**
+ * omap3_ctrl_set_iva_bootmode_idle - sets the IVA2 bootmode to idle
+ *
+ * Sets the bootmode for IVA2 to idle. This is needed by the PM code to
+ * force disable IVA2 so that it does not prevent any low-power states.
+ */
+static void __init omap3_ctrl_set_iva_bootmode_idle(void)
+{
+ omap_ctrl_writel(OMAP3_IVA2_BOOTMOD_IDLE,
+ OMAP343X_CONTROL_IVA2_BOOTMOD);
+}
+
+/**
+ * omap3_ctrl_setup_d2d_padconf - setup stacked modem pads for idle
+ *
+ * Sets up the pads controlling the stacked modem in such way that the
+ * device can enter idle.
+ */
+static void __init omap3_ctrl_setup_d2d_padconf(void)
+{
+ u16 mask, padconf;
+
+ /*
+ * In a stand alone OMAP3430 where there is not a stacked
+ * modem for the D2D Idle Ack and D2D MStandby must be pulled
+ * high. S CONTROL_PADCONF_SAD2D_IDLEACK and
+ * CONTROL_PADCONF_SAD2D_MSTDBY to have a pull up.
+ */
+ mask = (1 << 4) | (1 << 3); /* pull-up, enabled */
+ padconf = omap_ctrl_readw(OMAP3_PADCONF_SAD2D_MSTANDBY);
+ padconf |= mask;
+ omap_ctrl_writew(padconf, OMAP3_PADCONF_SAD2D_MSTANDBY);
+
+ padconf = omap_ctrl_readw(OMAP3_PADCONF_SAD2D_IDLEACK);
+ padconf |= mask;
+ omap_ctrl_writew(padconf, OMAP3_PADCONF_SAD2D_IDLEACK);
+}
+
+/**
+ * omap3_ctrl_init - does static initializations for control module
+ *
+ * Initializes system control module. This sets up the sysconfig autoidle,
+ * and sets up modem and iva2 so that they can be idled properly.
+ */
+void __init omap3_ctrl_init(void)
+{
+ omap_ctrl_writel(OMAP3430_AUTOIDLE_MASK, OMAP2_CONTROL_SYSCONFIG);
+
+ omap3_ctrl_set_iva_bootmode_idle();
+
+ omap3_ctrl_setup_d2d_padconf();
+}
+#endif /* CONFIG_ARCH_OMAP3 && CONFIG_PM */
+
+struct control_init_data {
+ int index;
+ s16 offset;
+};
+
+static struct control_init_data ctrl_data = {
+ .index = TI_CLKM_CTRL,
+};
+
+static const struct control_init_data omap2_ctrl_data = {
+ .index = TI_CLKM_CTRL,
+ .offset = -OMAP2_CONTROL_GENERAL,
+};
+
+static const struct of_device_id omap_scrm_dt_match_table[] = {
+ { .compatible = "ti,am3-scm", .data = &ctrl_data },
+ { .compatible = "ti,am4-scm", .data = &ctrl_data },
+ { .compatible = "ti,omap2-scm", .data = &omap2_ctrl_data },
+ { .compatible = "ti,omap3-scm", .data = &omap2_ctrl_data },
+ { .compatible = "ti,dm816-scrm", .data = &ctrl_data },
+ { .compatible = "ti,omap4-scm-core", .data = &ctrl_data },
+ { .compatible = "ti,omap5-scm-core", .data = &ctrl_data },
+ { .compatible = "ti,dra7-scm-core", .data = &ctrl_data },
+ { }
+};
+
+/**
+ * omap2_control_base_init - initialize iomappings for the control driver
+ *
+ * Detects and initializes the iomappings for the control driver, based
+ * on the DT data. Returns 0 in success, negative error value
+ * otherwise.
+ */
+int __init omap2_control_base_init(void)
+{
+ struct device_node *np;
+ const struct of_device_id *match;
+ struct control_init_data *data;
+
+ for_each_matching_node_and_match(np, omap_scrm_dt_match_table, &match) {
+ data = (struct control_init_data *)match->data;
+
+ omap2_ctrl_base = of_iomap(np, 0);
+ if (!omap2_ctrl_base)
+ return -ENOMEM;
+
+ omap2_ctrl_offset = data->offset;
+ }
+
+ return 0;
+}
+
+/**
+ * omap_control_init - low level init for the control driver
+ *
+ * Initializes the low level clock infrastructure for control driver.
+ * Returns 0 in success, negative error value in failure.
+ */
+int __init omap_control_init(void)
+{
+ struct device_node *np, *scm_conf;
+ const struct of_device_id *match;
+ const struct omap_prcm_init_data *data;
+ int ret;
+ struct regmap *syscon;
+
+ for_each_matching_node_and_match(np, omap_scrm_dt_match_table, &match) {
+ data = match->data;
+
+ /*
+ * Check if we have scm_conf node, if yes, use this to
+ * access clock registers.
+ */
+ scm_conf = of_get_child_by_name(np, "scm_conf");
+
+ if (scm_conf) {
+ syscon = syscon_node_to_regmap(scm_conf);
+
+ if (IS_ERR(syscon))
+ return PTR_ERR(syscon);
+
+ omap2_ctrl_syscon = syscon;
+
+ if (of_get_child_by_name(scm_conf, "clocks")) {
+ ret = omap2_clk_provider_init(scm_conf,
+ data->index,
+ syscon, NULL);
+ if (ret)
+ return ret;
+ }
+
+ iounmap(omap2_ctrl_base);
+ omap2_ctrl_base = NULL;
+ } else {
+ /* No scm_conf found, direct access */
+ ret = omap2_clk_provider_init(np, data->index, NULL,
+ omap2_ctrl_base);
+ if (ret)
+ return ret;
+ }
+ }
+
+ return 0;
+}
+
+/**
+ * omap3_control_legacy_iomap_init - legacy iomap init for clock providers
+ *
+ * Legacy iomap init for clock provider. Needed only by legacy boot mode,
+ * where the base addresses are not parsed from DT, but still required
+ * by the clock driver to be setup properly.
+ */
+void __init omap3_control_legacy_iomap_init(void)
+{
+ omap2_clk_legacy_provider_init(TI_CLKM_SCRM, omap2_ctrl_base);
+}