diff options
Diffstat (limited to 'kernel/arch/arm/mach-omap2/board-rx51-peripherals.c')
| -rw-r--r-- | kernel/arch/arm/mach-omap2/board-rx51-peripherals.c | 1286 |
1 files changed, 1286 insertions, 0 deletions
diff --git a/kernel/arch/arm/mach-omap2/board-rx51-peripherals.c b/kernel/arch/arm/mach-omap2/board-rx51-peripherals.c new file mode 100644 index 000000000..14edcd7a2 --- /dev/null +++ b/kernel/arch/arm/mach-omap2/board-rx51-peripherals.c @@ -0,0 +1,1286 @@ +/* + * linux/arch/arm/mach-omap2/board-rx51-peripherals.c + * + * Copyright (C) 2008-2009 Nokia + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/platform_device.h> +#include <linux/input.h> +#include <linux/input/matrix_keypad.h> +#include <linux/spi/spi.h> +#include <linux/wl12xx.h> +#include <linux/spi/tsc2005.h> +#include <linux/i2c.h> +#include <linux/i2c/twl.h> +#include <linux/clk.h> +#include <linux/delay.h> +#include <linux/regulator/machine.h> +#include <linux/gpio.h> +#include <linux/gpio_keys.h> +#include <linux/gpio/machine.h> +#include <linux/omap-gpmc.h> +#include <linux/mmc/host.h> +#include <linux/power/isp1704_charger.h> +#include <linux/platform_data/spi-omap2-mcspi.h> +#include <linux/platform_data/mtd-onenand-omap2.h> + +#include <asm/system_info.h> + +#include "common.h" +#include <linux/omap-dma.h> + +#include "board-rx51.h" + +#include <sound/tlv320aic3x.h> +#include <sound/tpa6130a2-plat.h> +#include <media/si4713.h> +#include <linux/platform_data/leds-lp55xx.h> + +#include <linux/platform_data/tsl2563.h> +#include <linux/lis3lv02d.h> + +#include <video/omap-panel-data.h> + +#if defined(CONFIG_IR_RX51) || defined(CONFIG_IR_RX51_MODULE) +#include <media/ir-rx51.h> +#endif + +#include "mux.h" +#include "omap-pm.h" +#include "hsmmc.h" +#include "common-board-devices.h" +#include "soc.h" +#include "omap-secure.h" + +#define SYSTEM_REV_B_USES_VAUX3 0x1699 +#define SYSTEM_REV_S_USES_VAUX3 0x8 + +#define RX51_WL1251_POWER_GPIO 87 +#define RX51_WL1251_IRQ_GPIO 42 +#define RX51_FMTX_RESET_GPIO 163 +#define RX51_FMTX_IRQ 53 +#define RX51_LP5523_CHIP_EN_GPIO 41 + +#define RX51_USB_TRANSCEIVER_RST_GPIO 67 + +#define RX51_TSC2005_RESET_GPIO 104 +#define RX51_TSC2005_IRQ_GPIO 100 + +#define LIS302_IRQ1_GPIO 181 +#define LIS302_IRQ2_GPIO 180 /* Not yet in use */ + +/* List all SPI devices here. Note that the list/probe order seems to matter! */ +enum { + RX51_SPI_WL1251, + RX51_SPI_TSC2005, /* Touch Controller */ + RX51_SPI_MIPID, /* LCD panel */ +}; + +static struct wl1251_platform_data wl1251_pdata; +static struct tsc2005_platform_data tsc2005_pdata; + +#if defined(CONFIG_SENSORS_LIS3_I2C) || defined(CONFIG_SENSORS_LIS3_I2C_MODULE) +static int lis302_setup(void) +{ + int err; + int irq1 = LIS302_IRQ1_GPIO; + int irq2 = LIS302_IRQ2_GPIO; + + /* gpio for interrupt pin 1 */ + err = gpio_request(irq1, "lis3lv02dl_irq1"); + if (err) { + printk(KERN_ERR "lis3lv02dl: gpio request failed\n"); + goto out; + } + + /* gpio for interrupt pin 2 */ + err = gpio_request(irq2, "lis3lv02dl_irq2"); + if (err) { + gpio_free(irq1); + printk(KERN_ERR "lis3lv02dl: gpio request failed\n"); + goto out; + } + + gpio_direction_input(irq1); + gpio_direction_input(irq2); + +out: + return err; +} + +static int lis302_release(void) +{ + gpio_free(LIS302_IRQ1_GPIO); + gpio_free(LIS302_IRQ2_GPIO); + + return 0; +} + +static struct lis3lv02d_platform_data rx51_lis3lv02d_data = { + .click_flags = LIS3_CLICK_SINGLE_X | LIS3_CLICK_SINGLE_Y | + LIS3_CLICK_SINGLE_Z, + /* Limits are 0.5g * value */ + .click_thresh_x = 8, + .click_thresh_y = 8, + .click_thresh_z = 10, + /* Click must be longer than time limit */ + .click_time_limit = 9, + /* Kind of debounce filter */ + .click_latency = 50, + + /* Limits for all axis. millig-value / 18 to get HW values */ + .wakeup_flags = LIS3_WAKEUP_X_HI | LIS3_WAKEUP_Y_HI, + .wakeup_thresh = 800 / 18, + .wakeup_flags2 = LIS3_WAKEUP_Z_HI , + .wakeup_thresh2 = 900 / 18, + + .hipass_ctrl = LIS3_HIPASS1_DISABLE | LIS3_HIPASS2_DISABLE, + + /* Interrupt line 2 for click detection, line 1 for thresholds */ + .irq_cfg = LIS3_IRQ2_CLICK | LIS3_IRQ1_FF_WU_12, + + .axis_x = LIS3_DEV_X, + .axis_y = LIS3_INV_DEV_Y, + .axis_z = LIS3_INV_DEV_Z, + .setup_resources = lis302_setup, + .release_resources = lis302_release, + .st_min_limits = {-32, 3, 3}, + .st_max_limits = {-3, 32, 32}, +}; +#endif + +#if defined(CONFIG_SENSORS_TSL2563) || defined(CONFIG_SENSORS_TSL2563_MODULE) +static struct tsl2563_platform_data rx51_tsl2563_platform_data = { + .cover_comp_gain = 16, +}; +#endif + +#if defined(CONFIG_LEDS_LP5523) || defined(CONFIG_LEDS_LP5523_MODULE) +static struct lp55xx_led_config rx51_lp5523_led_config[] = { + { + .name = "lp5523:kb1", + .chan_nr = 0, + .led_current = 50, + .max_current = 100, + }, { + .name = "lp5523:kb2", + .chan_nr = 1, + .led_current = 50, + .max_current = 100, + }, { + .name = "lp5523:kb3", + .chan_nr = 2, + .led_current = 50, + .max_current = 100, + }, { + .name = "lp5523:kb4", + .chan_nr = 3, + .led_current = 50, + .max_current = 100, + }, { + .name = "lp5523:b", + .chan_nr = 4, + .led_current = 50, + .max_current = 100, + }, { + .name = "lp5523:g", + .chan_nr = 5, + .led_current = 50, + .max_current = 100, + }, { + .name = "lp5523:r", + .chan_nr = 6, + .led_current = 50, + .max_current = 100, + }, { + .name = "lp5523:kb5", + .chan_nr = 7, + .led_current = 50, + .max_current = 100, + }, { + .name = "lp5523:kb6", + .chan_nr = 8, + .led_current = 50, + .max_current = 100, + } +}; + +static struct lp55xx_platform_data rx51_lp5523_platform_data = { + .led_config = rx51_lp5523_led_config, + .num_channels = ARRAY_SIZE(rx51_lp5523_led_config), + .clock_mode = LP55XX_CLOCK_AUTO, + .enable_gpio = RX51_LP5523_CHIP_EN_GPIO, +}; +#endif + +#define RX51_LCD_RESET_GPIO 90 + +static struct panel_acx565akm_platform_data acx_pdata = { + .name = "lcd", + .source = "sdi.0", + .reset_gpio = RX51_LCD_RESET_GPIO, + .datapairs = 2, +}; + +static struct omap2_mcspi_device_config wl1251_mcspi_config = { + .turbo_mode = 0, +}; + +static struct omap2_mcspi_device_config mipid_mcspi_config = { + .turbo_mode = 0, +}; + +static struct omap2_mcspi_device_config tsc2005_mcspi_config = { + .turbo_mode = 0, +}; + +static struct spi_board_info rx51_peripherals_spi_board_info[] __initdata = { + [RX51_SPI_WL1251] = { + .modalias = "wl1251", + .bus_num = 4, + .chip_select = 0, + .max_speed_hz = 48000000, + .mode = SPI_MODE_3, + .controller_data = &wl1251_mcspi_config, + .platform_data = &wl1251_pdata, + }, + [RX51_SPI_MIPID] = { + .modalias = "acx565akm", + .bus_num = 1, + .chip_select = 2, + .max_speed_hz = 6000000, + .controller_data = &mipid_mcspi_config, + .platform_data = &acx_pdata, + }, + [RX51_SPI_TSC2005] = { + .modalias = "tsc2005", + .bus_num = 1, + .chip_select = 0, + .max_speed_hz = 6000000, + .controller_data = &tsc2005_mcspi_config, + .platform_data = &tsc2005_pdata, + }, +}; + +static struct platform_device rx51_battery_device = { + .name = "rx51-battery", + .id = -1, +}; + +static void rx51_charger_set_power(bool on) +{ + gpio_set_value(RX51_USB_TRANSCEIVER_RST_GPIO, on); +} + +static struct isp1704_charger_data rx51_charger_data = { + .set_power = rx51_charger_set_power, +}; + +static struct platform_device rx51_charger_device = { + .name = "isp1704_charger", + .dev = { + .platform_data = &rx51_charger_data, + }, +}; + +static void __init rx51_charger_init(void) +{ + WARN_ON(gpio_request_one(RX51_USB_TRANSCEIVER_RST_GPIO, + GPIOF_OUT_INIT_HIGH, "isp1704_reset")); + + platform_device_register(&rx51_battery_device); + platform_device_register(&rx51_charger_device); +} + +#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE) + +#define RX51_GPIO_CAMERA_LENS_COVER 110 +#define RX51_GPIO_CAMERA_FOCUS 68 +#define RX51_GPIO_CAMERA_CAPTURE 69 +#define RX51_GPIO_KEYPAD_SLIDE 71 +#define RX51_GPIO_LOCK_BUTTON 113 +#define RX51_GPIO_PROXIMITY 89 + +#define RX51_GPIO_DEBOUNCE_TIMEOUT 10 + +static struct gpio_keys_button rx51_gpio_keys[] = { + { + .desc = "Camera Lens Cover", + .type = EV_SW, + .code = SW_CAMERA_LENS_COVER, + .gpio = RX51_GPIO_CAMERA_LENS_COVER, + .active_low = 1, + .debounce_interval = RX51_GPIO_DEBOUNCE_TIMEOUT, + }, { + .desc = "Camera Focus", + .type = EV_KEY, + .code = KEY_CAMERA_FOCUS, + .gpio = RX51_GPIO_CAMERA_FOCUS, + .active_low = 1, + .debounce_interval = RX51_GPIO_DEBOUNCE_TIMEOUT, + }, { + .desc = "Camera Capture", + .type = EV_KEY, + .code = KEY_CAMERA, + .gpio = RX51_GPIO_CAMERA_CAPTURE, + .active_low = 1, + .debounce_interval = RX51_GPIO_DEBOUNCE_TIMEOUT, + }, { + .desc = "Lock Button", + .type = EV_KEY, + .code = KEY_SCREENLOCK, + .gpio = RX51_GPIO_LOCK_BUTTON, + .active_low = 1, + .debounce_interval = RX51_GPIO_DEBOUNCE_TIMEOUT, + }, { + .desc = "Keypad Slide", + .type = EV_SW, + .code = SW_KEYPAD_SLIDE, + .gpio = RX51_GPIO_KEYPAD_SLIDE, + .active_low = 1, + .debounce_interval = RX51_GPIO_DEBOUNCE_TIMEOUT, + }, { + .desc = "Proximity Sensor", + .type = EV_SW, + .code = SW_FRONT_PROXIMITY, + .gpio = RX51_GPIO_PROXIMITY, + .active_low = 0, + .debounce_interval = RX51_GPIO_DEBOUNCE_TIMEOUT, + } +}; + +static struct gpio_keys_platform_data rx51_gpio_keys_data = { + .buttons = rx51_gpio_keys, + .nbuttons = ARRAY_SIZE(rx51_gpio_keys), +}; + +static struct platform_device rx51_gpio_keys_device = { + .name = "gpio-keys", + .id = -1, + .dev = { + .platform_data = &rx51_gpio_keys_data, + }, +}; + +static void __init rx51_add_gpio_keys(void) +{ + platform_device_register(&rx51_gpio_keys_device); +} +#else +static void __init rx51_add_gpio_keys(void) +{ +} +#endif /* CONFIG_KEYBOARD_GPIO || CONFIG_KEYBOARD_GPIO_MODULE */ + +static uint32_t board_keymap[] = { + /* + * Note that KEY(x, 8, KEY_XXX) entries represent "entrire row + * connected to the ground" matrix state. + */ + KEY(0, 0, KEY_Q), + KEY(0, 1, KEY_O), + KEY(0, 2, KEY_P), + KEY(0, 3, KEY_COMMA), + KEY(0, 4, KEY_BACKSPACE), + KEY(0, 6, KEY_A), + KEY(0, 7, KEY_S), + + KEY(1, 0, KEY_W), + KEY(1, 1, KEY_D), + KEY(1, 2, KEY_F), + KEY(1, 3, KEY_G), + KEY(1, 4, KEY_H), + KEY(1, 5, KEY_J), + KEY(1, 6, KEY_K), + KEY(1, 7, KEY_L), + + KEY(2, 0, KEY_E), + KEY(2, 1, KEY_DOT), + KEY(2, 2, KEY_UP), + KEY(2, 3, KEY_ENTER), + KEY(2, 5, KEY_Z), + KEY(2, 6, KEY_X), + KEY(2, 7, KEY_C), + KEY(2, 8, KEY_F9), + + KEY(3, 0, KEY_R), + KEY(3, 1, KEY_V), + KEY(3, 2, KEY_B), + KEY(3, 3, KEY_N), + KEY(3, 4, KEY_M), + KEY(3, 5, KEY_SPACE), + KEY(3, 6, KEY_SPACE), + KEY(3, 7, KEY_LEFT), + + KEY(4, 0, KEY_T), + KEY(4, 1, KEY_DOWN), + KEY(4, 2, KEY_RIGHT), + KEY(4, 4, KEY_LEFTCTRL), + KEY(4, 5, KEY_RIGHTALT), + KEY(4, 6, KEY_LEFTSHIFT), + KEY(4, 8, KEY_F10), + + KEY(5, 0, KEY_Y), + KEY(5, 8, KEY_F11), + + KEY(6, 0, KEY_U), + + KEY(7, 0, KEY_I), + KEY(7, 1, KEY_F7), + KEY(7, 2, KEY_F8), +}; + +static struct matrix_keymap_data board_map_data = { + .keymap = board_keymap, + .keymap_size = ARRAY_SIZE(board_keymap), +}; + +static struct twl4030_keypad_data rx51_kp_data = { + .keymap_data = &board_map_data, + .rows = 8, + .cols = 8, + .rep = 1, +}; + +/* Enable input logic and pull all lines up when eMMC is on. */ +static struct omap_board_mux rx51_mmc2_on_mux[] = { + OMAP3_MUX(SDMMC2_CMD, OMAP_PIN_INPUT_PULLUP | OMAP_MUX_MODE0), + OMAP3_MUX(SDMMC2_DAT0, OMAP_PIN_INPUT_PULLUP | OMAP_MUX_MODE0), + OMAP3_MUX(SDMMC2_DAT1, OMAP_PIN_INPUT_PULLUP | OMAP_MUX_MODE0), + OMAP3_MUX(SDMMC2_DAT2, OMAP_PIN_INPUT_PULLUP | OMAP_MUX_MODE0), + OMAP3_MUX(SDMMC2_DAT3, OMAP_PIN_INPUT_PULLUP | OMAP_MUX_MODE0), + OMAP3_MUX(SDMMC2_DAT4, OMAP_PIN_INPUT_PULLUP | OMAP_MUX_MODE0), + OMAP3_MUX(SDMMC2_DAT5, OMAP_PIN_INPUT_PULLUP | OMAP_MUX_MODE0), + OMAP3_MUX(SDMMC2_DAT6, OMAP_PIN_INPUT_PULLUP | OMAP_MUX_MODE0), + OMAP3_MUX(SDMMC2_DAT7, OMAP_PIN_INPUT_PULLUP | OMAP_MUX_MODE0), + { .reg_offset = OMAP_MUX_TERMINATOR }, +}; + +/* Disable input logic and pull all lines down when eMMC is off. */ +static struct omap_board_mux rx51_mmc2_off_mux[] = { + OMAP3_MUX(SDMMC2_CMD, OMAP_PULL_ENA | OMAP_MUX_MODE0), + OMAP3_MUX(SDMMC2_DAT0, OMAP_PULL_ENA | OMAP_MUX_MODE0), + OMAP3_MUX(SDMMC2_DAT1, OMAP_PULL_ENA | OMAP_MUX_MODE0), + OMAP3_MUX(SDMMC2_DAT2, OMAP_PULL_ENA | OMAP_MUX_MODE0), + OMAP3_MUX(SDMMC2_DAT3, OMAP_PULL_ENA | OMAP_MUX_MODE0), + OMAP3_MUX(SDMMC2_DAT4, OMAP_PULL_ENA | OMAP_MUX_MODE0), + OMAP3_MUX(SDMMC2_DAT5, OMAP_PULL_ENA | OMAP_MUX_MODE0), + OMAP3_MUX(SDMMC2_DAT6, OMAP_PULL_ENA | OMAP_MUX_MODE0), + OMAP3_MUX(SDMMC2_DAT7, OMAP_PULL_ENA | OMAP_MUX_MODE0), + { .reg_offset = OMAP_MUX_TERMINATOR }, +}; + +static struct omap_mux_partition *partition; + +/* + * Current flows to eMMC when eMMC is off and the data lines are pulled up, + * so pull them down. N.B. we pull 8 lines because we are using 8 lines. + */ +static void rx51_mmc2_remux(struct device *dev, int power_on) +{ + if (power_on) + omap_mux_write_array(partition, rx51_mmc2_on_mux); + else + omap_mux_write_array(partition, rx51_mmc2_off_mux); +} + +static struct omap2_hsmmc_info mmc[] __initdata = { + { + .name = "external", + .mmc = 1, + .caps = MMC_CAP_4_BIT_DATA, + .cover_only = true, + .gpio_cd = 160, + .gpio_wp = -EINVAL, + }, + { + .name = "internal", + .mmc = 2, + .caps = MMC_CAP_4_BIT_DATA | MMC_CAP_8_BIT_DATA, + /* See also rx51_mmc2_remux */ + .gpio_cd = -EINVAL, + .gpio_wp = -EINVAL, + .nonremovable = true, + .remux = rx51_mmc2_remux, + }, + {} /* Terminator */ +}; + +static struct regulator_consumer_supply rx51_vmmc1_supply[] = { + REGULATOR_SUPPLY("vmmc", "omap_hsmmc.0"), +}; + +static struct regulator_consumer_supply rx51_vaux2_supply[] = { + REGULATOR_SUPPLY("vdds_csib", "omap3isp"), +}; + +static struct regulator_consumer_supply rx51_vaux3_supply[] = { + REGULATOR_SUPPLY("vmmc", "omap_hsmmc.1"), +}; + +static struct regulator_consumer_supply rx51_vsim_supply[] = { + REGULATOR_SUPPLY("vmmc_aux", "omap_hsmmc.1"), +}; + +static struct regulator_consumer_supply rx51_vmmc2_supplies[] = { + /* tlv320aic3x analog supplies */ + REGULATOR_SUPPLY("AVDD", "2-0018"), + REGULATOR_SUPPLY("DRVDD", "2-0018"), + REGULATOR_SUPPLY("AVDD", "2-0019"), + REGULATOR_SUPPLY("DRVDD", "2-0019"), + /* tpa6130a2 */ + REGULATOR_SUPPLY("Vdd", "2-0060"), + /* Keep vmmc as last item. It is not iterated for newer boards */ + REGULATOR_SUPPLY("vmmc", "omap_hsmmc.1"), +}; + +static struct regulator_consumer_supply rx51_vio_supplies[] = { + /* tlv320aic3x digital supplies */ + REGULATOR_SUPPLY("IOVDD", "2-0018"), + REGULATOR_SUPPLY("DVDD", "2-0018"), + REGULATOR_SUPPLY("IOVDD", "2-0019"), + REGULATOR_SUPPLY("DVDD", "2-0019"), + /* Si4713 IO supply */ + REGULATOR_SUPPLY("vio", "2-0063"), + /* lis3lv02d */ + REGULATOR_SUPPLY("Vdd_IO", "3-001d"), +}; + +static struct regulator_consumer_supply rx51_vaux1_consumers[] = { + REGULATOR_SUPPLY("vdds_sdi", "omapdss"), + REGULATOR_SUPPLY("vdds_sdi", "omapdss_sdi.0"), + /* Si4713 supply */ + REGULATOR_SUPPLY("vdd", "2-0063"), + /* lis3lv02d */ + REGULATOR_SUPPLY("Vdd", "3-001d"), +}; + +static struct regulator_init_data rx51_vaux1 = { + .constraints = { + .name = "V28", + .min_uV = 2800000, + .max_uV = 2800000, + .always_on = true, /* due battery cover sensor */ + .valid_modes_mask = REGULATOR_MODE_NORMAL + | REGULATOR_MODE_STANDBY, + .valid_ops_mask = REGULATOR_CHANGE_MODE + | REGULATOR_CHANGE_STATUS, + }, + .num_consumer_supplies = ARRAY_SIZE(rx51_vaux1_consumers), + .consumer_supplies = rx51_vaux1_consumers, +}; + +static struct regulator_init_data rx51_vaux2 = { + .constraints = { + .name = "VCSI", + .min_uV = 1800000, + .max_uV = 1800000, + .valid_modes_mask = REGULATOR_MODE_NORMAL + | REGULATOR_MODE_STANDBY, + .valid_ops_mask = REGULATOR_CHANGE_MODE + | REGULATOR_CHANGE_STATUS, + }, + .num_consumer_supplies = ARRAY_SIZE(rx51_vaux2_supply), + .consumer_supplies = rx51_vaux2_supply, +}; + +/* VAUX3 - adds more power to VIO_18 rail */ +static struct regulator_init_data rx51_vaux3_cam = { + .constraints = { + .name = "VCAM_DIG_18", + .min_uV = 1800000, + .max_uV = 1800000, + .apply_uV = true, + .valid_modes_mask = REGULATOR_MODE_NORMAL + | REGULATOR_MODE_STANDBY, + .valid_ops_mask = REGULATOR_CHANGE_MODE + | REGULATOR_CHANGE_STATUS, + }, +}; + +static struct regulator_init_data rx51_vaux3_mmc = { + .constraints = { + .name = "VMMC2_30", + .min_uV = 2800000, + .max_uV = 3000000, + .apply_uV = true, + .valid_modes_mask = REGULATOR_MODE_NORMAL + | REGULATOR_MODE_STANDBY, + .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE + | REGULATOR_CHANGE_MODE + | REGULATOR_CHANGE_STATUS, + }, + .num_consumer_supplies = ARRAY_SIZE(rx51_vaux3_supply), + .consumer_supplies = rx51_vaux3_supply, +}; + +static struct regulator_init_data rx51_vaux4 = { + .constraints = { + .name = "VCAM_ANA_28", + .min_uV = 2800000, + .max_uV = 2800000, + .apply_uV = true, + .valid_modes_mask = REGULATOR_MODE_NORMAL + | REGULATOR_MODE_STANDBY, + .valid_ops_mask = REGULATOR_CHANGE_MODE + | REGULATOR_CHANGE_STATUS, + }, +}; + +static struct regulator_init_data rx51_vmmc1 = { + .constraints = { + .min_uV = 1850000, + .max_uV = 3150000, + .valid_modes_mask = REGULATOR_MODE_NORMAL + | REGULATOR_MODE_STANDBY, + .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE + | REGULATOR_CHANGE_MODE + | REGULATOR_CHANGE_STATUS, + }, + .num_consumer_supplies = ARRAY_SIZE(rx51_vmmc1_supply), + .consumer_supplies = rx51_vmmc1_supply, +}; + +static struct regulator_init_data rx51_vmmc2 = { + .constraints = { + .name = "V28_A", + .min_uV = 2800000, + .max_uV = 3000000, + .always_on = true, /* due VIO leak to AIC34 VDDs */ + .apply_uV = true, + .valid_modes_mask = REGULATOR_MODE_NORMAL + | REGULATOR_MODE_STANDBY, + .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE + | REGULATOR_CHANGE_MODE + | REGULATOR_CHANGE_STATUS, + }, + .num_consumer_supplies = ARRAY_SIZE(rx51_vmmc2_supplies), + .consumer_supplies = rx51_vmmc2_supplies, +}; + +static struct regulator_init_data rx51_vpll1 = { + .constraints = { + .name = "VPLL", + .min_uV = 1800000, + .max_uV = 1800000, + .apply_uV = true, + .always_on = true, + .valid_modes_mask = REGULATOR_MODE_NORMAL + | REGULATOR_MODE_STANDBY, + .valid_ops_mask = REGULATOR_CHANGE_MODE, + }, +}; + +static struct regulator_init_data rx51_vpll2 = { + .constraints = { + .name = "VSDI_CSI", + .min_uV = 1800000, + .max_uV = 1800000, + .apply_uV = true, + .always_on = true, + .valid_modes_mask = REGULATOR_MODE_NORMAL + | REGULATOR_MODE_STANDBY, + .valid_ops_mask = REGULATOR_CHANGE_MODE, + }, +}; + +static struct regulator_init_data rx51_vsim = { + .constraints = { + .name = "VMMC2_IO_18", + .min_uV = 1800000, + .max_uV = 1800000, + .apply_uV = true, + .valid_modes_mask = REGULATOR_MODE_NORMAL + | REGULATOR_MODE_STANDBY, + .valid_ops_mask = REGULATOR_CHANGE_MODE + | REGULATOR_CHANGE_STATUS, + }, + .num_consumer_supplies = ARRAY_SIZE(rx51_vsim_supply), + .consumer_supplies = rx51_vsim_supply, +}; + +static struct regulator_init_data rx51_vio = { + .constraints = { + .min_uV = 1800000, + .max_uV = 1800000, + .valid_modes_mask = REGULATOR_MODE_NORMAL + | REGULATOR_MODE_STANDBY, + .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE + | REGULATOR_CHANGE_MODE + | REGULATOR_CHANGE_STATUS, + }, + .num_consumer_supplies = ARRAY_SIZE(rx51_vio_supplies), + .consumer_supplies = rx51_vio_supplies, +}; + +static struct regulator_init_data rx51_vintana1 = { + .constraints = { + .name = "VINTANA1", + .min_uV = 1500000, + .max_uV = 1500000, + .always_on = true, + .valid_modes_mask = REGULATOR_MODE_NORMAL + | REGULATOR_MODE_STANDBY, + .valid_ops_mask = REGULATOR_CHANGE_MODE, + }, +}; + +static struct regulator_init_data rx51_vintana2 = { + .constraints = { + .name = "VINTANA2", + .min_uV = 2750000, + .max_uV = 2750000, + .apply_uV = true, + .always_on = true, + .valid_modes_mask = REGULATOR_MODE_NORMAL + | REGULATOR_MODE_STANDBY, + .valid_ops_mask = REGULATOR_CHANGE_MODE, + }, +}; + +static struct regulator_init_data rx51_vintdig = { + .constraints = { + .name = "VINTDIG", + .min_uV = 1500000, + .max_uV = 1500000, + .always_on = true, + .valid_modes_mask = REGULATOR_MODE_NORMAL + | REGULATOR_MODE_STANDBY, + .valid_ops_mask = REGULATOR_CHANGE_MODE, + }, +}; + +static struct gpiod_lookup_table rx51_fmtx_gpios_table = { + .dev_id = "2-0063", + .table = { + GPIO_LOOKUP("gpio.6", 3, "reset", GPIO_ACTIVE_HIGH), /* 163 */ + { }, + }, +}; + +static __init void rx51_gpio_init(void) +{ + gpiod_add_lookup_table(&rx51_fmtx_gpios_table); +} + +static int rx51_twlgpio_setup(struct device *dev, unsigned gpio, unsigned n) +{ + /* FIXME this gpio setup is just a placeholder for now */ + gpio_request_one(gpio + 6, GPIOF_OUT_INIT_LOW, "backlight_pwm"); + gpio_request_one(gpio + 7, GPIOF_OUT_INIT_LOW, "speaker_en"); + + return 0; +} + +static struct twl4030_gpio_platform_data rx51_gpio_data = { + .pulldowns = BIT(0) | BIT(1) | BIT(2) | BIT(3) + | BIT(4) | BIT(5) + | BIT(8) | BIT(9) | BIT(10) | BIT(11) + | BIT(12) | BIT(13) | BIT(14) | BIT(15) + | BIT(16) | BIT(17) , + .setup = rx51_twlgpio_setup, +}; + +static struct twl4030_ins sleep_on_seq[] __initdata = { +/* + * Turn off everything + */ + {MSG_BROADCAST(DEV_GRP_NULL, RES_GRP_ALL, 1, 0, RES_STATE_SLEEP), 2}, +}; + +static struct twl4030_script sleep_on_script __initdata = { + .script = sleep_on_seq, + .size = ARRAY_SIZE(sleep_on_seq), + .flags = TWL4030_SLEEP_SCRIPT, +}; + +static struct twl4030_ins wakeup_seq[] __initdata = { +/* + * Reenable everything + */ + {MSG_BROADCAST(DEV_GRP_NULL, RES_GRP_ALL, 1, 0, RES_STATE_ACTIVE), 2}, +}; + +static struct twl4030_script wakeup_script __initdata = { + .script = wakeup_seq, + .size = ARRAY_SIZE(wakeup_seq), + .flags = TWL4030_WAKEUP12_SCRIPT, +}; + +static struct twl4030_ins wakeup_p3_seq[] __initdata = { +/* + * Reenable everything + */ + {MSG_BROADCAST(DEV_GRP_NULL, RES_GRP_ALL, 1, 0, RES_STATE_ACTIVE), 2}, +}; + +static struct twl4030_script wakeup_p3_script __initdata = { + .script = wakeup_p3_seq, + .size = ARRAY_SIZE(wakeup_p3_seq), + .flags = TWL4030_WAKEUP3_SCRIPT, +}; + +static struct twl4030_ins wrst_seq[] __initdata = { +/* + * Reset twl4030. + * Reset VDD1 regulator. + * Reset VDD2 regulator. + * Reset VPLL1 regulator. + * Enable sysclk output. + * Reenable twl4030. + */ + {MSG_SINGULAR(DEV_GRP_NULL, RES_RESET, RES_STATE_OFF), 2}, + {MSG_BROADCAST(DEV_GRP_NULL, RES_GRP_ALL, 0, 1, RES_STATE_ACTIVE), + 0x13}, + {MSG_BROADCAST(DEV_GRP_NULL, RES_GRP_PP, 0, 3, RES_STATE_OFF), 0x13}, + {MSG_SINGULAR(DEV_GRP_NULL, RES_VDD1, RES_STATE_WRST), 0x13}, + {MSG_SINGULAR(DEV_GRP_NULL, RES_VDD2, RES_STATE_WRST), 0x13}, + {MSG_SINGULAR(DEV_GRP_NULL, RES_VPLL1, RES_STATE_WRST), 0x35}, + {MSG_SINGULAR(DEV_GRP_P3, RES_HFCLKOUT, RES_STATE_ACTIVE), 2}, + {MSG_SINGULAR(DEV_GRP_NULL, RES_RESET, RES_STATE_ACTIVE), 2}, +}; + +static struct twl4030_script wrst_script __initdata = { + .script = wrst_seq, + .size = ARRAY_SIZE(wrst_seq), + .flags = TWL4030_WRST_SCRIPT, +}; + +static struct twl4030_script *twl4030_scripts[] __initdata = { + /* wakeup12 script should be loaded before sleep script, otherwise a + board might hit retention before loading of wakeup script is + completed. This can cause boot failures depending on timing issues. + */ + &wakeup_script, + &sleep_on_script, + &wakeup_p3_script, + &wrst_script, +}; + +static struct twl4030_resconfig twl4030_rconfig[] __initdata = { + { .resource = RES_VDD1, .devgroup = -1, + .type = 1, .type2 = -1, .remap_off = RES_STATE_OFF, + .remap_sleep = RES_STATE_OFF + }, + { .resource = RES_VDD2, .devgroup = -1, + .type = 1, .type2 = -1, .remap_off = RES_STATE_OFF, + .remap_sleep = RES_STATE_OFF + }, + { .resource = RES_VPLL1, .devgroup = -1, + .type = 1, .type2 = -1, .remap_off = RES_STATE_OFF, + .remap_sleep = RES_STATE_OFF + }, + { .resource = RES_VPLL2, .devgroup = -1, + .type = -1, .type2 = 3, .remap_off = -1, .remap_sleep = -1 + }, + { .resource = RES_VAUX1, .devgroup = -1, + .type = -1, .type2 = 3, .remap_off = -1, .remap_sleep = -1 + }, + { .resource = RES_VAUX2, .devgroup = -1, + .type = -1, .type2 = 3, .remap_off = -1, .remap_sleep = -1 + }, + { .resource = RES_VAUX3, .devgroup = -1, + .type = -1, .type2 = 3, .remap_off = -1, .remap_sleep = -1 + }, + { .resource = RES_VAUX4, .devgroup = -1, + .type = -1, .type2 = 3, .remap_off = -1, .remap_sleep = -1 + }, + { .resource = RES_VMMC1, .devgroup = -1, + .type = -1, .type2 = 3, .remap_off = -1, .remap_sleep = -1 + }, + { .resource = RES_VMMC2, .devgroup = -1, + .type = -1, .type2 = 3, .remap_off = -1, .remap_sleep = -1 + }, + { .resource = RES_VDAC, .devgroup = -1, + .type = -1, .type2 = 3, .remap_off = -1, .remap_sleep = -1 + }, + { .resource = RES_VSIM, .devgroup = -1, + .type = -1, .type2 = 3, .remap_off = -1, .remap_sleep = -1 + }, + { .resource = RES_VINTANA1, .devgroup = DEV_GRP_P1 | DEV_GRP_P3, + .type = -1, .type2 = -1, .remap_off = -1, .remap_sleep = -1 + }, + { .resource = RES_VINTANA2, .devgroup = DEV_GRP_P1 | DEV_GRP_P3, + .type = 1, .type2 = -1, .remap_off = -1, .remap_sleep = -1 + }, + { .resource = RES_VINTDIG, .devgroup = DEV_GRP_P1 | DEV_GRP_P3, + .type = -1, .type2 = -1, .remap_off = -1, .remap_sleep = -1 + }, + { .resource = RES_VIO, .devgroup = DEV_GRP_P3, + .type = 1, .type2 = -1, .remap_off = -1, .remap_sleep = -1 + }, + { .resource = RES_CLKEN, .devgroup = DEV_GRP_P1 | DEV_GRP_P3, + .type = 1, .type2 = -1 , .remap_off = -1, .remap_sleep = -1 + }, + { .resource = RES_REGEN, .devgroup = DEV_GRP_P1 | DEV_GRP_P3, + .type = 1, .type2 = -1, .remap_off = -1, .remap_sleep = -1 + }, + { .resource = RES_NRES_PWRON, .devgroup = DEV_GRP_P1 | DEV_GRP_P3, + .type = 1, .type2 = -1, .remap_off = -1, .remap_sleep = -1 + }, + { .resource = RES_SYSEN, .devgroup = DEV_GRP_P1 | DEV_GRP_P3, + .type = 1, .type2 = -1, .remap_off = -1, .remap_sleep = -1 + }, + { .resource = RES_HFCLKOUT, .devgroup = DEV_GRP_P3, + .type = 1, .type2 = -1, .remap_off = -1, .remap_sleep = -1 + }, + { .resource = RES_32KCLKOUT, .devgroup = -1, + .type = 1, .type2 = -1, .remap_off = -1, .remap_sleep = -1 + }, + { .resource = RES_RESET, .devgroup = -1, + .type = 1, .type2 = -1, .remap_off = -1, .remap_sleep = -1 + }, + { .resource = RES_MAIN_REF, .devgroup = -1, + .type = 1, .type2 = -1, .remap_off = -1, .remap_sleep = -1 + }, + { 0, 0}, +}; + +static struct twl4030_power_data rx51_t2scripts_data __initdata = { + .scripts = twl4030_scripts, + .num = ARRAY_SIZE(twl4030_scripts), + .resource_config = twl4030_rconfig, +}; + +static struct twl4030_vibra_data rx51_vibra_data __initdata = { + .coexist = 0, +}; + +static struct twl4030_audio_data rx51_audio_data __initdata = { + .audio_mclk = 26000000, + .vibra = &rx51_vibra_data, +}; + +static struct twl4030_platform_data rx51_twldata __initdata = { + /* platform_data for children goes here */ + .gpio = &rx51_gpio_data, + .keypad = &rx51_kp_data, + .power = &rx51_t2scripts_data, + .audio = &rx51_audio_data, + + .vaux1 = &rx51_vaux1, + .vaux2 = &rx51_vaux2, + .vaux4 = &rx51_vaux4, + .vmmc1 = &rx51_vmmc1, + .vpll1 = &rx51_vpll1, + .vpll2 = &rx51_vpll2, + .vsim = &rx51_vsim, + .vintana1 = &rx51_vintana1, + .vintana2 = &rx51_vintana2, + .vintdig = &rx51_vintdig, + .vio = &rx51_vio, +}; + +static struct tpa6130a2_platform_data rx51_tpa6130a2_data __initdata_or_module = { + .power_gpio = 98, +}; + +/* Audio setup data */ +static struct aic3x_setup_data rx51_aic34_setup = { + .gpio_func[0] = AIC3X_GPIO1_FUNC_DISABLED, + .gpio_func[1] = AIC3X_GPIO2_FUNC_DIGITAL_MIC_INPUT, +}; + +static struct aic3x_pdata rx51_aic3x_data = { + .setup = &rx51_aic34_setup, + .gpio_reset = 60, +}; + +static struct aic3x_pdata rx51_aic3x_data2 = { + .gpio_reset = 60, +}; + +#if IS_ENABLED(CONFIG_I2C_SI4713) && IS_ENABLED(CONFIG_PLATFORM_SI4713) +static struct si4713_platform_data rx51_si4713_platform_data = { + .is_platform_device = true +}; +#endif + +static struct i2c_board_info __initdata rx51_peripherals_i2c_board_info_2[] = { +#if IS_ENABLED(CONFIG_I2C_SI4713) && IS_ENABLED(CONFIG_PLATFORM_SI4713) + { + I2C_BOARD_INFO("si4713", 0x63), + .platform_data = &rx51_si4713_platform_data, + }, +#endif + { + I2C_BOARD_INFO("tlv320aic3x", 0x18), + .platform_data = &rx51_aic3x_data, + }, + { + I2C_BOARD_INFO("tlv320aic3x", 0x19), + .platform_data = &rx51_aic3x_data2, + }, +#if defined(CONFIG_SENSORS_TSL2563) || defined(CONFIG_SENSORS_TSL2563_MODULE) + { + I2C_BOARD_INFO("tsl2563", 0x29), + .platform_data = &rx51_tsl2563_platform_data, + }, +#endif +#if defined(CONFIG_LEDS_LP5523) || defined(CONFIG_LEDS_LP5523_MODULE) + { + I2C_BOARD_INFO("lp5523", 0x32), + .platform_data = &rx51_lp5523_platform_data, + }, +#endif + { + I2C_BOARD_INFO("bq27200", 0x55), + }, + { + I2C_BOARD_INFO("tpa6130a2", 0x60), + .platform_data = &rx51_tpa6130a2_data, + } +}; + +static struct i2c_board_info __initdata rx51_peripherals_i2c_board_info_3[] = { +#if defined(CONFIG_SENSORS_LIS3_I2C) || defined(CONFIG_SENSORS_LIS3_I2C_MODULE) + { + I2C_BOARD_INFO("lis3lv02d", 0x1d), + .platform_data = &rx51_lis3lv02d_data, + }, +#endif +}; + +static int __init rx51_i2c_init(void) +{ +#if IS_ENABLED(CONFIG_I2C_SI4713) && IS_ENABLED(CONFIG_PLATFORM_SI4713) + int err; +#endif + + if ((system_rev >= SYSTEM_REV_S_USES_VAUX3 && system_rev < 0x100) || + system_rev >= SYSTEM_REV_B_USES_VAUX3) { + rx51_twldata.vaux3 = &rx51_vaux3_mmc; + /* Only older boards use VMMC2 for internal MMC */ + rx51_vmmc2.num_consumer_supplies--; + } else { + rx51_twldata.vaux3 = &rx51_vaux3_cam; + } + rx51_twldata.vmmc2 = &rx51_vmmc2; + omap3_pmic_get_config(&rx51_twldata, + TWL_COMMON_PDATA_USB | TWL_COMMON_PDATA_MADC, + TWL_COMMON_REGULATOR_VDAC); + + rx51_twldata.vdac->constraints.apply_uV = true; + rx51_twldata.vdac->constraints.name = "VDAC"; + + omap_pmic_init(1, 2200, "twl5030", 7 + OMAP_INTC_START, &rx51_twldata); +#if IS_ENABLED(CONFIG_I2C_SI4713) && IS_ENABLED(CONFIG_PLATFORM_SI4713) + err = gpio_request_one(RX51_FMTX_IRQ, GPIOF_DIR_IN, "si4713 irq"); + if (err) { + printk(KERN_ERR "Cannot request si4713 irq gpio. %d\n", err); + return err; + } + rx51_peripherals_i2c_board_info_2[0].irq = gpio_to_irq(RX51_FMTX_IRQ); +#endif + omap_register_i2c_bus(2, 100, rx51_peripherals_i2c_board_info_2, + ARRAY_SIZE(rx51_peripherals_i2c_board_info_2)); +#if defined(CONFIG_SENSORS_LIS3_I2C) || defined(CONFIG_SENSORS_LIS3_I2C_MODULE) + rx51_lis3lv02d_data.irq2 = gpio_to_irq(LIS302_IRQ2_GPIO); + rx51_peripherals_i2c_board_info_3[0].irq = gpio_to_irq(LIS302_IRQ1_GPIO); +#endif + omap_register_i2c_bus(3, 400, rx51_peripherals_i2c_board_info_3, + ARRAY_SIZE(rx51_peripherals_i2c_board_info_3)); + return 0; +} + +#if defined(CONFIG_MTD_ONENAND_OMAP2) || \ + defined(CONFIG_MTD_ONENAND_OMAP2_MODULE) + +static struct mtd_partition onenand_partitions[] = { + { + .name = "bootloader", + .offset = 0, + .size = 0x20000, + .mask_flags = MTD_WRITEABLE, /* Force read-only */ + }, + { + .name = "config", + .offset = MTDPART_OFS_APPEND, + .size = 0x60000, + }, + { + .name = "log", + .offset = MTDPART_OFS_APPEND, + .size = 0x40000, + }, + { + .name = "kernel", + .offset = MTDPART_OFS_APPEND, + .size = 0x200000, + }, + { + .name = "initfs", + .offset = MTDPART_OFS_APPEND, + .size = 0x200000, + }, + { + .name = "rootfs", + .offset = MTDPART_OFS_APPEND, + .size = MTDPART_SIZ_FULL, + }, +}; + +static struct omap_onenand_platform_data board_onenand_data[] = { + { + .cs = 0, + .gpio_irq = 65, + .parts = onenand_partitions, + .nr_parts = ARRAY_SIZE(onenand_partitions), + .flags = ONENAND_SYNC_READWRITE, + } +}; +#endif + +static struct gpio rx51_wl1251_gpios[] __initdata = { + { RX51_WL1251_IRQ_GPIO, GPIOF_IN, "wl1251 irq" }, +}; + +static void __init rx51_init_wl1251(void) +{ + int irq, ret; + + ret = gpio_request_array(rx51_wl1251_gpios, + ARRAY_SIZE(rx51_wl1251_gpios)); + if (ret < 0) + goto error; + + irq = gpio_to_irq(RX51_WL1251_IRQ_GPIO); + if (irq < 0) + goto err_irq; + + wl1251_pdata.power_gpio = RX51_WL1251_POWER_GPIO; + rx51_peripherals_spi_board_info[RX51_SPI_WL1251].irq = irq; + + return; + +err_irq: + gpio_free(RX51_WL1251_IRQ_GPIO); +error: + printk(KERN_ERR "wl1251 board initialisation failed\n"); + wl1251_pdata.power_gpio = -1; + + /* + * Now rx51_peripherals_spi_board_info[1].irq is zero and + * set_power is null, and wl1251_probe() will fail. + */ +} + +static struct tsc2005_platform_data tsc2005_pdata = { + .ts_pressure_max = 2048, + .ts_pressure_fudge = 2, + .ts_x_max = 4096, + .ts_x_fudge = 4, + .ts_y_max = 4096, + .ts_y_fudge = 7, + .ts_x_plate_ohm = 280, + .esd_timeout_ms = 8000, +}; + +static struct gpio rx51_tsc2005_gpios[] __initdata = { + { RX51_TSC2005_IRQ_GPIO, GPIOF_IN, "tsc2005 IRQ" }, + { RX51_TSC2005_RESET_GPIO, GPIOF_OUT_INIT_HIGH, "tsc2005 reset" }, +}; + +static void rx51_tsc2005_set_reset(bool enable) +{ + gpio_set_value(RX51_TSC2005_RESET_GPIO, enable); +} + +static void __init rx51_init_tsc2005(void) +{ + int r; + + omap_mux_init_gpio(RX51_TSC2005_RESET_GPIO, OMAP_PIN_OUTPUT); + omap_mux_init_gpio(RX51_TSC2005_IRQ_GPIO, OMAP_PIN_INPUT_PULLUP); + + r = gpio_request_array(rx51_tsc2005_gpios, + ARRAY_SIZE(rx51_tsc2005_gpios)); + if (r < 0) { + printk(KERN_ERR "tsc2005 board initialization failed\n"); + tsc2005_pdata.esd_timeout_ms = 0; + return; + } + + tsc2005_pdata.set_reset = rx51_tsc2005_set_reset; + rx51_peripherals_spi_board_info[RX51_SPI_TSC2005].irq = + gpio_to_irq(RX51_TSC2005_IRQ_GPIO); +} + +#if defined(CONFIG_IR_RX51) || defined(CONFIG_IR_RX51_MODULE) +static struct lirc_rx51_platform_data rx51_lirc_data = { + .set_max_mpu_wakeup_lat = omap_pm_set_max_mpu_wakeup_lat, + .pwm_timer = 9, /* Use GPT 9 for CIR */ +}; + +static struct platform_device rx51_lirc_device = { + .name = "lirc_rx51", + .id = -1, + .dev = { + .platform_data = &rx51_lirc_data, + }, +}; + +static void __init rx51_init_lirc(void) +{ + platform_device_register(&rx51_lirc_device); +} +#else +static void __init rx51_init_lirc(void) +{ +} +#endif + +static struct platform_device madc_hwmon = { + .name = "twl4030_madc_hwmon", + .id = -1, +}; + +static void __init rx51_init_twl4030_hwmon(void) +{ + platform_device_register(&madc_hwmon); +} + +static struct platform_device omap3_rom_rng_device = { + .name = "omap3-rom-rng", + .id = -1, + .dev = { + .platform_data = rx51_secure_rng_call, + }, +}; + +static void __init rx51_init_omap3_rom_rng(void) +{ + if (omap_type() == OMAP2_DEVICE_TYPE_SEC) { + pr_info("RX-51: Registring OMAP3 HWRNG device\n"); + platform_device_register(&omap3_rom_rng_device); + } +} + +void __init rx51_peripherals_init(void) +{ + rx51_gpio_init(); + rx51_i2c_init(); + regulator_has_full_constraints(); + gpmc_onenand_init(board_onenand_data); + rx51_add_gpio_keys(); + rx51_init_wl1251(); + rx51_init_tsc2005(); + rx51_init_lirc(); + spi_register_board_info(rx51_peripherals_spi_board_info, + ARRAY_SIZE(rx51_peripherals_spi_board_info)); + + partition = omap_mux_get("core"); + if (partition) + omap_hsmmc_init(mmc); + + rx51_charger_init(); + rx51_init_twl4030_hwmon(); + rx51_init_omap3_rom_rng(); +} + |