summaryrefslogtreecommitdiffstats
path: root/kernel/arch/arm/mach-omap2/board-cm-t35.c
diff options
context:
space:
mode:
Diffstat (limited to 'kernel/arch/arm/mach-omap2/board-cm-t35.c')
-rw-r--r--kernel/arch/arm/mach-omap2/board-cm-t35.c769
1 files changed, 769 insertions, 0 deletions
diff --git a/kernel/arch/arm/mach-omap2/board-cm-t35.c b/kernel/arch/arm/mach-omap2/board-cm-t35.c
new file mode 100644
index 000000000..b5dfbc1b1
--- /dev/null
+++ b/kernel/arch/arm/mach-omap2/board-cm-t35.c
@@ -0,0 +1,769 @@
+/*
+ * CompuLab CM-T35/CM-T3730 modules support
+ *
+ * Copyright (C) 2009-2011 CompuLab, Ltd.
+ * Authors: Mike Rapoport <mike@compulab.co.il>
+ * Igor Grinberg <grinberg@compulab.co.il>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ */
+
+#include <linux/clk-provider.h>
+#include <linux/clkdev.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/input.h>
+#include <linux/input/matrix_keypad.h>
+#include <linux/delay.h>
+#include <linux/gpio.h>
+#include <linux/omap-gpmc.h>
+#include <linux/platform_data/gpio-omap.h>
+
+#include <linux/platform_data/at24.h>
+#include <linux/i2c/twl.h>
+#include <linux/regulator/fixed.h>
+#include <linux/regulator/machine.h>
+#include <linux/mmc/host.h>
+#include <linux/usb/phy.h>
+
+#include <linux/spi/spi.h>
+#include <linux/spi/tdo24m.h>
+
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+
+#include <linux/platform_data/mtd-nand-omap2.h>
+#include <video/omapdss.h>
+#include <video/omap-panel-data.h>
+#include <linux/platform_data/spi-omap2-mcspi.h>
+
+#include "common.h"
+#include "mux.h"
+#include "sdram-micron-mt46h32m32lf-6.h"
+#include "hsmmc.h"
+#include "common-board-devices.h"
+
+#define CM_T35_GPIO_PENDOWN 57
+#define SB_T35_USB_HUB_RESET_GPIO 167
+
+#define CM_T35_SMSC911X_CS 5
+#define CM_T35_SMSC911X_GPIO 163
+#define SB_T35_SMSC911X_CS 4
+#define SB_T35_SMSC911X_GPIO 65
+
+#if defined(CONFIG_SMSC911X) || defined(CONFIG_SMSC911X_MODULE)
+#include <linux/smsc911x.h>
+#include "gpmc-smsc911x.h"
+
+static struct omap_smsc911x_platform_data cm_t35_smsc911x_cfg = {
+ .id = 0,
+ .cs = CM_T35_SMSC911X_CS,
+ .gpio_irq = CM_T35_SMSC911X_GPIO,
+ .gpio_reset = -EINVAL,
+ .flags = SMSC911X_USE_32BIT | SMSC911X_SAVE_MAC_ADDRESS,
+};
+
+static struct omap_smsc911x_platform_data sb_t35_smsc911x_cfg = {
+ .id = 1,
+ .cs = SB_T35_SMSC911X_CS,
+ .gpio_irq = SB_T35_SMSC911X_GPIO,
+ .gpio_reset = -EINVAL,
+ .flags = SMSC911X_USE_32BIT | SMSC911X_SAVE_MAC_ADDRESS,
+};
+
+static struct regulator_consumer_supply cm_t35_smsc911x_supplies[] = {
+ REGULATOR_SUPPLY("vddvario", "smsc911x.0"),
+ REGULATOR_SUPPLY("vdd33a", "smsc911x.0"),
+};
+
+static struct regulator_consumer_supply sb_t35_smsc911x_supplies[] = {
+ REGULATOR_SUPPLY("vddvario", "smsc911x.1"),
+ REGULATOR_SUPPLY("vdd33a", "smsc911x.1"),
+};
+
+static void __init cm_t35_init_ethernet(void)
+{
+ regulator_register_fixed(0, cm_t35_smsc911x_supplies,
+ ARRAY_SIZE(cm_t35_smsc911x_supplies));
+ regulator_register_fixed(1, sb_t35_smsc911x_supplies,
+ ARRAY_SIZE(sb_t35_smsc911x_supplies));
+
+ gpmc_smsc911x_init(&cm_t35_smsc911x_cfg);
+ gpmc_smsc911x_init(&sb_t35_smsc911x_cfg);
+}
+#else
+static inline void __init cm_t35_init_ethernet(void) { return; }
+#endif
+
+#if defined(CONFIG_LEDS_GPIO) || defined(CONFIG_LEDS_GPIO_MODULE)
+#include <linux/leds.h>
+
+static struct gpio_led cm_t35_leds[] = {
+ [0] = {
+ .gpio = 186,
+ .name = "cm-t35:green",
+ .default_trigger = "heartbeat",
+ .active_low = 0,
+ },
+};
+
+static struct gpio_led_platform_data cm_t35_led_pdata = {
+ .num_leds = ARRAY_SIZE(cm_t35_leds),
+ .leds = cm_t35_leds,
+};
+
+static struct platform_device cm_t35_led_device = {
+ .name = "leds-gpio",
+ .id = -1,
+ .dev = {
+ .platform_data = &cm_t35_led_pdata,
+ },
+};
+
+static void __init cm_t35_init_led(void)
+{
+ platform_device_register(&cm_t35_led_device);
+}
+#else
+static inline void cm_t35_init_led(void) {}
+#endif
+
+#if defined(CONFIG_MTD_NAND_OMAP2) || defined(CONFIG_MTD_NAND_OMAP2_MODULE)
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/nand.h>
+#include <linux/mtd/partitions.h>
+
+static struct mtd_partition cm_t35_nand_partitions[] = {
+ {
+ .name = "xloader",
+ .offset = 0, /* Offset = 0x00000 */
+ .size = 4 * NAND_BLOCK_SIZE,
+ .mask_flags = MTD_WRITEABLE
+ },
+ {
+ .name = "uboot",
+ .offset = MTDPART_OFS_APPEND, /* Offset = 0x80000 */
+ .size = 15 * NAND_BLOCK_SIZE,
+ },
+ {
+ .name = "uboot environment",
+ .offset = MTDPART_OFS_APPEND, /* Offset = 0x260000 */
+ .size = 2 * NAND_BLOCK_SIZE,
+ },
+ {
+ .name = "linux",
+ .offset = MTDPART_OFS_APPEND, /* Offset = 0x2A0000 */
+ .size = 32 * NAND_BLOCK_SIZE,
+ },
+ {
+ .name = "rootfs",
+ .offset = MTDPART_OFS_APPEND, /* Offset = 0x6A0000 */
+ .size = MTDPART_SIZ_FULL,
+ },
+};
+
+static struct omap_nand_platform_data cm_t35_nand_data = {
+ .parts = cm_t35_nand_partitions,
+ .nr_parts = ARRAY_SIZE(cm_t35_nand_partitions),
+ .cs = 0,
+};
+
+static void __init cm_t35_init_nand(void)
+{
+ if (gpmc_nand_init(&cm_t35_nand_data, NULL) < 0)
+ pr_err("CM-T35: Unable to register NAND device\n");
+}
+#else
+static inline void cm_t35_init_nand(void) {}
+#endif
+
+#define CM_T35_LCD_EN_GPIO 157
+#define CM_T35_LCD_BL_GPIO 58
+#define CM_T35_DVI_EN_GPIO 54
+
+static const struct display_timing cm_t35_lcd_videomode = {
+ .pixelclock = { 0, 26000000, 0 },
+
+ .hactive = { 0, 480, 0 },
+ .hfront_porch = { 0, 104, 0 },
+ .hback_porch = { 0, 8, 0 },
+ .hsync_len = { 0, 8, 0 },
+
+ .vactive = { 0, 640, 0 },
+ .vfront_porch = { 0, 4, 0 },
+ .vback_porch = { 0, 2, 0 },
+ .vsync_len = { 0, 2, 0 },
+
+ .flags = DISPLAY_FLAGS_HSYNC_LOW | DISPLAY_FLAGS_VSYNC_LOW |
+ DISPLAY_FLAGS_DE_HIGH | DISPLAY_FLAGS_PIXDATA_NEGEDGE,
+};
+
+static struct panel_dpi_platform_data cm_t35_lcd_pdata = {
+ .name = "lcd",
+ .source = "dpi.0",
+
+ .data_lines = 18,
+
+ .display_timing = &cm_t35_lcd_videomode,
+
+ .enable_gpio = -1,
+ .backlight_gpio = CM_T35_LCD_BL_GPIO,
+};
+
+static struct platform_device cm_t35_lcd_device = {
+ .name = "panel-dpi",
+ .id = 0,
+ .dev.platform_data = &cm_t35_lcd_pdata,
+};
+
+static struct connector_dvi_platform_data cm_t35_dvi_connector_pdata = {
+ .name = "dvi",
+ .source = "tfp410.0",
+ .i2c_bus_num = -1,
+};
+
+static struct platform_device cm_t35_dvi_connector_device = {
+ .name = "connector-dvi",
+ .id = 0,
+ .dev.platform_data = &cm_t35_dvi_connector_pdata,
+};
+
+static struct encoder_tfp410_platform_data cm_t35_tfp410_pdata = {
+ .name = "tfp410.0",
+ .source = "dpi.0",
+ .data_lines = 24,
+ .power_down_gpio = CM_T35_DVI_EN_GPIO,
+};
+
+static struct platform_device cm_t35_tfp410_device = {
+ .name = "tfp410",
+ .id = 0,
+ .dev.platform_data = &cm_t35_tfp410_pdata,
+};
+
+static struct connector_atv_platform_data cm_t35_tv_pdata = {
+ .name = "tv",
+ .source = "venc.0",
+ .connector_type = OMAP_DSS_VENC_TYPE_SVIDEO,
+ .invert_polarity = false,
+};
+
+static struct platform_device cm_t35_tv_connector_device = {
+ .name = "connector-analog-tv",
+ .id = 0,
+ .dev.platform_data = &cm_t35_tv_pdata,
+};
+
+static struct omap_dss_board_info cm_t35_dss_data = {
+ .default_display_name = "dvi",
+};
+
+static struct omap2_mcspi_device_config tdo24m_mcspi_config = {
+ .turbo_mode = 0,
+};
+
+static struct tdo24m_platform_data tdo24m_config = {
+ .model = TDO35S,
+};
+
+static struct spi_board_info cm_t35_lcd_spi_board_info[] __initdata = {
+ {
+ .modalias = "tdo24m",
+ .bus_num = 4,
+ .chip_select = 0,
+ .max_speed_hz = 1000000,
+ .controller_data = &tdo24m_mcspi_config,
+ .platform_data = &tdo24m_config,
+ },
+};
+
+static void __init cm_t35_init_display(void)
+{
+ int err;
+
+ spi_register_board_info(cm_t35_lcd_spi_board_info,
+ ARRAY_SIZE(cm_t35_lcd_spi_board_info));
+
+
+ err = gpio_request_one(CM_T35_LCD_EN_GPIO, GPIOF_OUT_INIT_LOW,
+ "lcd bl enable");
+ if (err) {
+ pr_err("CM-T35: failed to request LCD EN GPIO\n");
+ return;
+ }
+
+ msleep(50);
+ gpio_set_value(CM_T35_LCD_EN_GPIO, 1);
+
+ err = omap_display_init(&cm_t35_dss_data);
+ if (err) {
+ pr_err("CM-T35: failed to register DSS device\n");
+ gpio_free(CM_T35_LCD_EN_GPIO);
+ }
+
+ platform_device_register(&cm_t35_tfp410_device);
+ platform_device_register(&cm_t35_dvi_connector_device);
+ platform_device_register(&cm_t35_lcd_device);
+ platform_device_register(&cm_t35_tv_connector_device);
+}
+
+static struct regulator_consumer_supply cm_t35_vmmc1_supply[] = {
+ REGULATOR_SUPPLY("vmmc", "omap_hsmmc.0"),
+};
+
+static struct regulator_consumer_supply cm_t35_vsim_supply[] = {
+ REGULATOR_SUPPLY("vmmc_aux", "omap_hsmmc.0"),
+};
+
+static struct regulator_consumer_supply cm_t35_vio_supplies[] = {
+ REGULATOR_SUPPLY("vcc", "spi1.0"),
+ REGULATOR_SUPPLY("vdds_dsi", "omapdss"),
+ REGULATOR_SUPPLY("vdds_dsi", "omapdss_dpi.0"),
+ REGULATOR_SUPPLY("vdds_dsi", "omapdss_dsi.0"),
+};
+
+/* VMMC1 for MMC1 pins CMD, CLK, DAT0..DAT3 (20 mA, plus card == max 220 mA) */
+static struct regulator_init_data cm_t35_vmmc1 = {
+ .constraints = {
+ .min_uV = 1850000,
+ .max_uV = 3150000,
+ .valid_modes_mask = REGULATOR_MODE_NORMAL
+ | REGULATOR_MODE_STANDBY,
+ .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE
+ | REGULATOR_CHANGE_MODE
+ | REGULATOR_CHANGE_STATUS,
+ },
+ .num_consumer_supplies = ARRAY_SIZE(cm_t35_vmmc1_supply),
+ .consumer_supplies = cm_t35_vmmc1_supply,
+};
+
+/* VSIM for MMC1 pins DAT4..DAT7 (2 mA, plus card == max 50 mA) */
+static struct regulator_init_data cm_t35_vsim = {
+ .constraints = {
+ .min_uV = 1800000,
+ .max_uV = 3000000,
+ .valid_modes_mask = REGULATOR_MODE_NORMAL
+ | REGULATOR_MODE_STANDBY,
+ .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE
+ | REGULATOR_CHANGE_MODE
+ | REGULATOR_CHANGE_STATUS,
+ },
+ .num_consumer_supplies = ARRAY_SIZE(cm_t35_vsim_supply),
+ .consumer_supplies = cm_t35_vsim_supply,
+};
+
+static struct regulator_init_data cm_t35_vio = {
+ .constraints = {
+ .min_uV = 1800000,
+ .max_uV = 1800000,
+ .apply_uV = true,
+ .valid_modes_mask = REGULATOR_MODE_NORMAL
+ | REGULATOR_MODE_STANDBY,
+ .valid_ops_mask = REGULATOR_CHANGE_MODE,
+ },
+ .num_consumer_supplies = ARRAY_SIZE(cm_t35_vio_supplies),
+ .consumer_supplies = cm_t35_vio_supplies,
+};
+
+static uint32_t cm_t35_keymap[] = {
+ KEY(0, 0, KEY_A), KEY(0, 1, KEY_B), KEY(0, 2, KEY_LEFT),
+ KEY(1, 0, KEY_UP), KEY(1, 1, KEY_ENTER), KEY(1, 2, KEY_DOWN),
+ KEY(2, 0, KEY_RIGHT), KEY(2, 1, KEY_C), KEY(2, 2, KEY_D),
+};
+
+static struct matrix_keymap_data cm_t35_keymap_data = {
+ .keymap = cm_t35_keymap,
+ .keymap_size = ARRAY_SIZE(cm_t35_keymap),
+};
+
+static struct twl4030_keypad_data cm_t35_kp_data = {
+ .keymap_data = &cm_t35_keymap_data,
+ .rows = 3,
+ .cols = 3,
+ .rep = 1,
+};
+
+static struct omap2_hsmmc_info mmc[] = {
+ {
+ .mmc = 1,
+ .caps = MMC_CAP_4_BIT_DATA,
+ .gpio_cd = -EINVAL,
+ .gpio_wp = -EINVAL,
+ .deferred = true,
+ },
+ {
+ .mmc = 2,
+ .caps = MMC_CAP_4_BIT_DATA,
+ .transceiver = 1,
+ .gpio_cd = -EINVAL,
+ .gpio_wp = -EINVAL,
+ .ocr_mask = 0x00100000, /* 3.3V */
+ },
+ {} /* Terminator */
+};
+
+static struct usbhs_phy_data phy_data[] __initdata = {
+ {
+ .port = 1,
+ .reset_gpio = OMAP_MAX_GPIO_LINES + 6,
+ .vcc_gpio = -EINVAL,
+ },
+ {
+ .port = 2,
+ .reset_gpio = OMAP_MAX_GPIO_LINES + 7,
+ .vcc_gpio = -EINVAL,
+ },
+};
+
+static struct usbhs_omap_platform_data usbhs_bdata __initdata = {
+ .port_mode[0] = OMAP_EHCI_PORT_MODE_PHY,
+ .port_mode[1] = OMAP_EHCI_PORT_MODE_PHY,
+};
+
+static void __init cm_t35_init_usbh(void)
+{
+ int err;
+
+ err = gpio_request_one(SB_T35_USB_HUB_RESET_GPIO,
+ GPIOF_OUT_INIT_LOW, "usb hub rst");
+ if (err) {
+ pr_err("SB-T35: usb hub rst gpio request failed: %d\n", err);
+ } else {
+ udelay(10);
+ gpio_set_value(SB_T35_USB_HUB_RESET_GPIO, 1);
+ msleep(1);
+ }
+
+ usbhs_init_phys(phy_data, ARRAY_SIZE(phy_data));
+ usbhs_init(&usbhs_bdata);
+}
+
+static int cm_t35_twl_gpio_setup(struct device *dev, unsigned gpio,
+ unsigned ngpio)
+{
+ int wlan_rst = gpio + 2;
+
+ if (gpio_request_one(wlan_rst, GPIOF_OUT_INIT_HIGH, "WLAN RST") == 0) {
+ gpio_export(wlan_rst, 0);
+ udelay(10);
+ gpio_set_value_cansleep(wlan_rst, 0);
+ udelay(10);
+ gpio_set_value_cansleep(wlan_rst, 1);
+ } else {
+ pr_err("CM-T35: could not obtain gpio for WiFi reset\n");
+ }
+
+ /* gpio + 0 is "mmc0_cd" (input/IRQ) */
+ mmc[0].gpio_cd = gpio + 0;
+ omap_hsmmc_late_init(mmc);
+
+ return 0;
+}
+
+static struct twl4030_gpio_platform_data cm_t35_gpio_data = {
+ .setup = cm_t35_twl_gpio_setup,
+};
+
+static struct twl4030_power_data cm_t35_power_data = {
+ .use_poweroff = true,
+};
+
+static struct twl4030_platform_data cm_t35_twldata = {
+ /* platform_data for children goes here */
+ .keypad = &cm_t35_kp_data,
+ .gpio = &cm_t35_gpio_data,
+ .vmmc1 = &cm_t35_vmmc1,
+ .vsim = &cm_t35_vsim,
+ .vio = &cm_t35_vio,
+ .power = &cm_t35_power_data,
+};
+
+#if defined(CONFIG_VIDEO_OMAP3) || defined(CONFIG_VIDEO_OMAP3_MODULE)
+#include <media/omap3isp.h>
+#include "devices.h"
+
+static struct isp_platform_subdev cm_t35_isp_subdevs[] = {
+ {
+ .board_info = &(struct i2c_board_info){
+ I2C_BOARD_INFO("mt9t001", 0x5d)
+ },
+ .i2c_adapter_id = 3,
+ .bus = &(struct isp_bus_cfg){
+ .interface = ISP_INTERFACE_PARALLEL,
+ .bus = {
+ .parallel = {
+ .clk_pol = 1,
+ },
+ },
+ },
+ },
+ {
+ .board_info = &(struct i2c_board_info){
+ I2C_BOARD_INFO("tvp5150", 0x5c),
+ },
+ .i2c_adapter_id = 3,
+ .bus = &(struct isp_bus_cfg){
+ .interface = ISP_INTERFACE_PARALLEL,
+ .bus = {
+ .parallel = {
+ .clk_pol = 0,
+ },
+ },
+ },
+ },
+ { 0 },
+};
+
+static struct isp_platform_data cm_t35_isp_pdata = {
+ .subdevs = cm_t35_isp_subdevs,
+};
+
+static struct regulator_consumer_supply cm_t35_camera_supplies[] = {
+ REGULATOR_SUPPLY("vaa", "3-005d"),
+ REGULATOR_SUPPLY("vdd", "3-005d"),
+};
+
+static void __init cm_t35_init_camera(void)
+{
+ struct clk *clk;
+
+ clk = clk_register_fixed_rate(NULL, "mt9t001-clkin", NULL, CLK_IS_ROOT,
+ 48000000);
+ clk_register_clkdev(clk, NULL, "3-005d");
+
+ regulator_register_fixed(2, cm_t35_camera_supplies,
+ ARRAY_SIZE(cm_t35_camera_supplies));
+
+ if (omap3_init_camera(&cm_t35_isp_pdata) < 0)
+ pr_warn("CM-T3x: Failed registering camera device!\n");
+}
+
+#else
+static inline void cm_t35_init_camera(void) {}
+#endif /* CONFIG_VIDEO_OMAP3 */
+
+static void __init cm_t35_init_i2c(void)
+{
+ omap3_pmic_get_config(&cm_t35_twldata, TWL_COMMON_PDATA_USB,
+ TWL_COMMON_REGULATOR_VDAC |
+ TWL_COMMON_PDATA_AUDIO);
+
+ omap3_pmic_init("tps65930", &cm_t35_twldata);
+
+ omap_register_i2c_bus(3, 400, NULL, 0);
+}
+
+#ifdef CONFIG_OMAP_MUX
+static struct omap_board_mux board_mux[] __initdata = {
+ /* nCS and IRQ for CM-T35 ethernet */
+ OMAP3_MUX(GPMC_NCS5, OMAP_MUX_MODE0),
+ OMAP3_MUX(UART3_CTS_RCTX, OMAP_MUX_MODE4 | OMAP_PIN_INPUT_PULLUP),
+
+ /* nCS and IRQ for SB-T35 ethernet */
+ OMAP3_MUX(GPMC_NCS4, OMAP_MUX_MODE0),
+ OMAP3_MUX(GPMC_WAIT3, OMAP_MUX_MODE4 | OMAP_PIN_INPUT_PULLUP),
+
+ /* PENDOWN GPIO */
+ OMAP3_MUX(GPMC_NCS6, OMAP_MUX_MODE4 | OMAP_PIN_INPUT),
+
+ /* mUSB */
+ OMAP3_MUX(HSUSB0_CLK, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
+ OMAP3_MUX(HSUSB0_STP, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
+ OMAP3_MUX(HSUSB0_DIR, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
+ OMAP3_MUX(HSUSB0_NXT, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
+ OMAP3_MUX(HSUSB0_DATA0, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
+ OMAP3_MUX(HSUSB0_DATA1, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
+ OMAP3_MUX(HSUSB0_DATA2, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
+ OMAP3_MUX(HSUSB0_DATA3, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
+ OMAP3_MUX(HSUSB0_DATA4, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
+ OMAP3_MUX(HSUSB0_DATA5, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
+ OMAP3_MUX(HSUSB0_DATA6, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
+ OMAP3_MUX(HSUSB0_DATA7, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
+
+ /* MMC 2 */
+ OMAP3_MUX(SDMMC2_DAT4, OMAP_MUX_MODE1 | OMAP_PIN_OUTPUT),
+ OMAP3_MUX(SDMMC2_DAT5, OMAP_MUX_MODE1 | OMAP_PIN_OUTPUT),
+ OMAP3_MUX(SDMMC2_DAT6, OMAP_MUX_MODE1 | OMAP_PIN_OUTPUT),
+ OMAP3_MUX(SDMMC2_DAT7, OMAP_MUX_MODE1 | OMAP_PIN_INPUT),
+
+ /* McSPI 1 */
+ OMAP3_MUX(MCSPI1_CLK, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
+ OMAP3_MUX(MCSPI1_SIMO, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
+ OMAP3_MUX(MCSPI1_SOMI, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
+ OMAP3_MUX(MCSPI1_CS0, OMAP_MUX_MODE0 | OMAP_PIN_INPUT_PULLDOWN),
+
+ /* McSPI 4 */
+ OMAP3_MUX(MCBSP1_CLKR, OMAP_MUX_MODE1 | OMAP_PIN_INPUT),
+ OMAP3_MUX(MCBSP1_DX, OMAP_MUX_MODE1 | OMAP_PIN_INPUT),
+ OMAP3_MUX(MCBSP1_DR, OMAP_MUX_MODE1 | OMAP_PIN_INPUT),
+ OMAP3_MUX(MCBSP1_FSX, OMAP_MUX_MODE1 | OMAP_PIN_INPUT_PULLUP),
+
+ /* McBSP 2 */
+ OMAP3_MUX(MCBSP2_FSX, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
+ OMAP3_MUX(MCBSP2_CLKX, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
+ OMAP3_MUX(MCBSP2_DR, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
+ OMAP3_MUX(MCBSP2_DX, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
+
+ /* serial ports */
+ OMAP3_MUX(MCBSP3_CLKX, OMAP_MUX_MODE1 | OMAP_PIN_OUTPUT),
+ OMAP3_MUX(MCBSP3_FSX, OMAP_MUX_MODE1 | OMAP_PIN_INPUT),
+ OMAP3_MUX(UART1_TX, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
+ OMAP3_MUX(UART1_RX, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
+
+ /* common DSS */
+ OMAP3_MUX(DSS_PCLK, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
+ OMAP3_MUX(DSS_HSYNC, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
+ OMAP3_MUX(DSS_VSYNC, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
+ OMAP3_MUX(DSS_ACBIAS, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
+ OMAP3_MUX(DSS_DATA6, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
+ OMAP3_MUX(DSS_DATA7, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
+ OMAP3_MUX(DSS_DATA8, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
+ OMAP3_MUX(DSS_DATA9, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
+ OMAP3_MUX(DSS_DATA10, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
+ OMAP3_MUX(DSS_DATA11, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
+ OMAP3_MUX(DSS_DATA12, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
+ OMAP3_MUX(DSS_DATA13, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
+ OMAP3_MUX(DSS_DATA14, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
+ OMAP3_MUX(DSS_DATA15, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
+ OMAP3_MUX(DSS_DATA16, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
+ OMAP3_MUX(DSS_DATA17, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
+
+ /* Camera */
+ OMAP3_MUX(CAM_HS, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
+ OMAP3_MUX(CAM_VS, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
+ OMAP3_MUX(CAM_XCLKA, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
+ OMAP3_MUX(CAM_PCLK, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
+ OMAP3_MUX(CAM_FLD, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
+ OMAP3_MUX(CAM_D0, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
+ OMAP3_MUX(CAM_D1, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
+ OMAP3_MUX(CAM_D2, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
+ OMAP3_MUX(CAM_D3, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
+ OMAP3_MUX(CAM_D4, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
+ OMAP3_MUX(CAM_D5, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
+ OMAP3_MUX(CAM_D6, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
+ OMAP3_MUX(CAM_D7, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
+ OMAP3_MUX(CAM_D8, OMAP_MUX_MODE0 | OMAP_PIN_INPUT_PULLDOWN),
+ OMAP3_MUX(CAM_D9, OMAP_MUX_MODE0 | OMAP_PIN_INPUT_PULLDOWN),
+ OMAP3_MUX(CAM_STROBE, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
+
+ OMAP3_MUX(CAM_D10, OMAP_MUX_MODE4 | OMAP_PIN_INPUT_PULLDOWN),
+ OMAP3_MUX(CAM_D11, OMAP_MUX_MODE4 | OMAP_PIN_INPUT_PULLDOWN),
+
+ /* display controls */
+ OMAP3_MUX(MCBSP1_FSR, OMAP_MUX_MODE4 | OMAP_PIN_OUTPUT),
+ OMAP3_MUX(GPMC_NCS7, OMAP_MUX_MODE4 | OMAP_PIN_OUTPUT),
+ OMAP3_MUX(GPMC_NCS3, OMAP_MUX_MODE4 | OMAP_PIN_OUTPUT),
+
+ /* TPS IRQ */
+ OMAP3_MUX(SYS_NIRQ, OMAP_MUX_MODE0 | OMAP_WAKEUP_EN | \
+ OMAP_PIN_INPUT_PULLUP),
+
+ { .reg_offset = OMAP_MUX_TERMINATOR },
+};
+
+static void __init cm_t3x_common_dss_mux_init(int mux_mode)
+{
+ omap_mux_init_signal("dss_data18", mux_mode);
+ omap_mux_init_signal("dss_data19", mux_mode);
+ omap_mux_init_signal("dss_data20", mux_mode);
+ omap_mux_init_signal("dss_data21", mux_mode);
+ omap_mux_init_signal("dss_data22", mux_mode);
+ omap_mux_init_signal("dss_data23", mux_mode);
+}
+
+static void __init cm_t35_init_mux(void)
+{
+ int mux_mode = OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT;
+
+ omap_mux_init_signal("dss_data0.dss_data0", mux_mode);
+ omap_mux_init_signal("dss_data1.dss_data1", mux_mode);
+ omap_mux_init_signal("dss_data2.dss_data2", mux_mode);
+ omap_mux_init_signal("dss_data3.dss_data3", mux_mode);
+ omap_mux_init_signal("dss_data4.dss_data4", mux_mode);
+ omap_mux_init_signal("dss_data5.dss_data5", mux_mode);
+ cm_t3x_common_dss_mux_init(mux_mode);
+}
+
+static void __init cm_t3730_init_mux(void)
+{
+ int mux_mode = OMAP_MUX_MODE3 | OMAP_PIN_OUTPUT;
+
+ omap_mux_init_signal("sys_boot0", mux_mode);
+ omap_mux_init_signal("sys_boot1", mux_mode);
+ omap_mux_init_signal("sys_boot3", mux_mode);
+ omap_mux_init_signal("sys_boot4", mux_mode);
+ omap_mux_init_signal("sys_boot5", mux_mode);
+ omap_mux_init_signal("sys_boot6", mux_mode);
+ cm_t3x_common_dss_mux_init(mux_mode);
+}
+#else
+static inline void cm_t35_init_mux(void) {}
+static inline void cm_t3730_init_mux(void) {}
+#endif
+
+static void __init cm_t3x_common_init(void)
+{
+ omap3_mux_init(board_mux, OMAP_PACKAGE_CUS);
+ omap_serial_init();
+ omap_sdrc_init(mt46h32m32lf6_sdrc_params,
+ mt46h32m32lf6_sdrc_params);
+ omap_hsmmc_init(mmc);
+ cm_t35_init_i2c();
+ omap_ads7846_init(1, CM_T35_GPIO_PENDOWN, 0, NULL);
+ cm_t35_init_ethernet();
+ cm_t35_init_led();
+ cm_t35_init_display();
+ omap_twl4030_audio_init("cm-t3x", NULL);
+
+ usb_bind_phy("musb-hdrc.0.auto", 0, "twl4030_usb");
+ usb_musb_init(NULL);
+ cm_t35_init_usbh();
+ cm_t35_init_camera();
+}
+
+static void __init cm_t35_init(void)
+{
+ cm_t3x_common_init();
+ cm_t35_init_mux();
+ cm_t35_init_nand();
+}
+
+static void __init cm_t3730_init(void)
+{
+ cm_t3x_common_init();
+ cm_t3730_init_mux();
+}
+
+MACHINE_START(CM_T35, "Compulab CM-T35")
+ .atag_offset = 0x100,
+ .reserve = omap_reserve,
+ .map_io = omap3_map_io,
+ .init_early = omap35xx_init_early,
+ .init_irq = omap3_init_irq,
+ .init_machine = cm_t35_init,
+ .init_late = omap35xx_init_late,
+ .init_time = omap3_sync32k_timer_init,
+ .restart = omap3xxx_restart,
+MACHINE_END
+
+MACHINE_START(CM_T3730, "Compulab CM-T3730")
+ .atag_offset = 0x100,
+ .reserve = omap_reserve,
+ .map_io = omap3_map_io,
+ .init_early = omap3630_init_early,
+ .init_irq = omap3_init_irq,
+ .init_machine = cm_t3730_init,
+ .init_late = omap3630_init_late,
+ .init_time = omap3_sync32k_timer_init,
+ .restart = omap3xxx_restart,
+MACHINE_END