summaryrefslogtreecommitdiffstats
path: root/kernel/arch/arm/mach-netx/nxdb500.c
diff options
context:
space:
mode:
Diffstat (limited to 'kernel/arch/arm/mach-netx/nxdb500.c')
-rw-r--r--kernel/arch/arm/mach-netx/nxdb500.c209
1 files changed, 209 insertions, 0 deletions
diff --git a/kernel/arch/arm/mach-netx/nxdb500.c b/kernel/arch/arm/mach-netx/nxdb500.c
new file mode 100644
index 000000000..9b558eb30
--- /dev/null
+++ b/kernel/arch/arm/mach-netx/nxdb500.c
@@ -0,0 +1,209 @@
+/*
+ * arch/arm/mach-netx/nxdb500.c
+ *
+ * Copyright (c) 2005 Sascha Hauer <s.hauer@pengutronix.de>, Pengutronix
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2
+ * as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#include <linux/dma-mapping.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/mtd/plat-ram.h>
+#include <linux/platform_device.h>
+#include <linux/amba/bus.h>
+#include <linux/amba/clcd.h>
+
+#include <mach/hardware.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <mach/netx-regs.h>
+#include <linux/platform_data/eth-netx.h>
+
+#include "generic.h"
+#include "fb.h"
+
+static struct clcd_panel qvga = {
+ .mode = {
+ .name = "QVGA",
+ .refresh = 60,
+ .xres = 240,
+ .yres = 320,
+ .pixclock = 187617,
+ .left_margin = 6,
+ .right_margin = 26,
+ .upper_margin = 0,
+ .lower_margin = 6,
+ .hsync_len = 6,
+ .vsync_len = 1,
+ .sync = 0,
+ .vmode = FB_VMODE_NONINTERLACED,
+ },
+ .width = -1,
+ .height = -1,
+ .tim2 = 16,
+ .cntl = CNTL_LCDTFT | CNTL_BGR,
+ .bpp = 16,
+ .grayscale = 0,
+};
+
+static inline int nxdb500_check(struct clcd_fb *fb, struct fb_var_screeninfo *var)
+{
+ var->green.length = 5;
+ var->green.msb_right = 0;
+
+ return clcdfb_check(fb, var);
+}
+
+static int nxdb500_clcd_setup(struct clcd_fb *fb)
+{
+ unsigned int val;
+
+ fb->fb.var.green.length = 5;
+ fb->fb.var.green.msb_right = 0;
+
+ /* enable asic control */
+ val = readl(NETX_SYSTEM_IOC_ACCESS_KEY);
+ writel(val, NETX_SYSTEM_IOC_ACCESS_KEY);
+
+ writel(3, NETX_SYSTEM_IOC_CR);
+
+ val = readl(NETX_PIO_OUTPIO);
+ writel(val | 1, NETX_PIO_OUTPIO);
+
+ val = readl(NETX_PIO_OEPIO);
+ writel(val | 1, NETX_PIO_OEPIO);
+ return netx_clcd_setup(fb);
+}
+
+static struct clcd_board clcd_data = {
+ .name = "netX",
+ .check = nxdb500_check,
+ .decode = clcdfb_decode,
+ .enable = netx_clcd_enable,
+ .setup = nxdb500_clcd_setup,
+ .mmap = netx_clcd_mmap,
+ .remove = netx_clcd_remove,
+};
+
+static struct netxeth_platform_data eth0_platform_data = {
+ .xcno = 0,
+};
+
+static struct platform_device netx_eth0_device = {
+ .name = "netx-eth",
+ .id = 0,
+ .num_resources = 0,
+ .resource = NULL,
+ .dev = {
+ .platform_data = &eth0_platform_data,
+ }
+};
+
+static struct netxeth_platform_data eth1_platform_data = {
+ .xcno = 1,
+};
+
+static struct platform_device netx_eth1_device = {
+ .name = "netx-eth",
+ .id = 1,
+ .num_resources = 0,
+ .resource = NULL,
+ .dev = {
+ .platform_data = &eth1_platform_data,
+ }
+};
+
+static struct resource netx_uart0_resources[] = {
+ [0] = {
+ .start = 0x00100A00,
+ .end = 0x00100A3F,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = (NETX_IRQ_UART0),
+ .end = (NETX_IRQ_UART0),
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device netx_uart0_device = {
+ .name = "netx-uart",
+ .id = 0,
+ .num_resources = ARRAY_SIZE(netx_uart0_resources),
+ .resource = netx_uart0_resources,
+};
+
+static struct resource netx_uart1_resources[] = {
+ [0] = {
+ .start = 0x00100A40,
+ .end = 0x00100A7F,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = (NETX_IRQ_UART1),
+ .end = (NETX_IRQ_UART1),
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device netx_uart1_device = {
+ .name = "netx-uart",
+ .id = 1,
+ .num_resources = ARRAY_SIZE(netx_uart1_resources),
+ .resource = netx_uart1_resources,
+};
+
+static struct resource netx_uart2_resources[] = {
+ [0] = {
+ .start = 0x00100A80,
+ .end = 0x00100ABF,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = (NETX_IRQ_UART2),
+ .end = (NETX_IRQ_UART2),
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device netx_uart2_device = {
+ .name = "netx-uart",
+ .id = 2,
+ .num_resources = ARRAY_SIZE(netx_uart2_resources),
+ .resource = netx_uart2_resources,
+};
+
+static struct platform_device *devices[] __initdata = {
+ &netx_eth0_device,
+ &netx_eth1_device,
+ &netx_uart0_device,
+ &netx_uart1_device,
+ &netx_uart2_device,
+};
+
+static void __init nxdb500_init(void)
+{
+ netx_fb_init(&clcd_data, &qvga);
+ platform_add_devices(devices, ARRAY_SIZE(devices));
+}
+
+MACHINE_START(NXDB500, "Hilscher nxdb500")
+ .atag_offset = 0x100,
+ .map_io = netx_map_io,
+ .init_irq = netx_init_irq,
+ .init_time = netx_timer_init,
+ .init_machine = nxdb500_init,
+ .restart = netx_restart,
+MACHINE_END