diff options
Diffstat (limited to 'kernel/arch/arm/mach-mvebu/board-v7.c')
| -rw-r--r-- | kernel/arch/arm/mach-mvebu/board-v7.c | 248 |
1 files changed, 248 insertions, 0 deletions
diff --git a/kernel/arch/arm/mach-mvebu/board-v7.c b/kernel/arch/arm/mach-mvebu/board-v7.c new file mode 100644 index 000000000..afee9083a --- /dev/null +++ b/kernel/arch/arm/mach-mvebu/board-v7.c @@ -0,0 +1,248 @@ +/* + * Device Tree support for Armada 370 and XP platforms. + * + * Copyright (C) 2012 Marvell + * + * Lior Amsalem <alior@marvell.com> + * Gregory CLEMENT <gregory.clement@free-electrons.com> + * Thomas Petazzoni <thomas.petazzoni@free-electrons.com> + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/clk-provider.h> +#include <linux/of_address.h> +#include <linux/of_fdt.h> +#include <linux/of_platform.h> +#include <linux/io.h> +#include <linux/clocksource.h> +#include <linux/dma-mapping.h> +#include <linux/memblock.h> +#include <linux/mbus.h> +#include <linux/signal.h> +#include <linux/slab.h> +#include <linux/irqchip.h> +#include <asm/hardware/cache-l2x0.h> +#include <asm/mach/arch.h> +#include <asm/mach/map.h> +#include <asm/mach/time.h> +#include <asm/smp_scu.h> +#include "armada-370-xp.h" +#include "common.h" +#include "coherency.h" +#include "mvebu-soc-id.h" + +static void __iomem *scu_base; + +/* + * Enables the SCU when available. Obviously, this is only useful on + * Cortex-A based SOCs, not on PJ4B based ones. + */ +static void __init mvebu_scu_enable(void) +{ + struct device_node *np = + of_find_compatible_node(NULL, NULL, "arm,cortex-a9-scu"); + if (np) { + scu_base = of_iomap(np, 0); + scu_enable(scu_base); + of_node_put(np); + } +} + +void __iomem *mvebu_get_scu_base(void) +{ + return scu_base; +} + +/* + * When returning from suspend, the platform goes through the + * bootloader, which executes its DDR3 training code. This code has + * the unfortunate idea of using the first 10 KB of each DRAM bank to + * exercise the RAM and calculate the optimal timings. Therefore, this + * area of RAM is overwritten, and shouldn't be used by the kernel if + * suspend/resume is supported. + */ + +#ifdef CONFIG_SUSPEND +#define MVEBU_DDR_TRAINING_AREA_SZ (10 * SZ_1K) +static int __init mvebu_scan_mem(unsigned long node, const char *uname, + int depth, void *data) +{ + const char *type = of_get_flat_dt_prop(node, "device_type", NULL); + const __be32 *reg, *endp; + int l; + + if (type == NULL || strcmp(type, "memory")) + return 0; + + reg = of_get_flat_dt_prop(node, "linux,usable-memory", &l); + if (reg == NULL) + reg = of_get_flat_dt_prop(node, "reg", &l); + if (reg == NULL) + return 0; + + endp = reg + (l / sizeof(__be32)); + while ((endp - reg) >= (dt_root_addr_cells + dt_root_size_cells)) { + u64 base, size; + + base = dt_mem_next_cell(dt_root_addr_cells, ®); + size = dt_mem_next_cell(dt_root_size_cells, ®); + + memblock_reserve(base, MVEBU_DDR_TRAINING_AREA_SZ); + } + + return 0; +} + +static void __init mvebu_memblock_reserve(void) +{ + of_scan_flat_dt(mvebu_scan_mem, NULL); +} +#else +static void __init mvebu_memblock_reserve(void) {} +#endif + +/* + * Early versions of Armada 375 SoC have a bug where the BootROM + * leaves an external data abort pending. The kernel is hit by this + * data abort as soon as it enters userspace, because it unmasks the + * data aborts at this moment. We register a custom abort handler + * below to ignore the first data abort to work around this + * problem. + */ +static int armada_375_external_abort_wa(unsigned long addr, unsigned int fsr, + struct pt_regs *regs) +{ + static int ignore_first; + + if (!ignore_first && fsr == 0x1406) { + ignore_first = 1; + return 0; + } + + return 1; +} + +static void __init mvebu_init_irq(void) +{ + irqchip_init(); + mvebu_scu_enable(); + coherency_init(); + BUG_ON(mvebu_mbus_dt_init(coherency_available())); +} + +static void __init external_abort_quirk(void) +{ + u32 dev, rev; + + if (mvebu_get_soc_id(&dev, &rev) == 0 && rev > ARMADA_375_Z1_REV) + return; + + hook_fault_code(16 + 6, armada_375_external_abort_wa, SIGBUS, 0, + "imprecise external abort"); +} + +static void __init i2c_quirk(void) +{ + struct device_node *np; + u32 dev, rev; + + /* + * Only revisons more recent than A0 support the offload + * mechanism. We can exit only if we are sure that we can + * get the SoC revision and it is more recent than A0. + */ + if (mvebu_get_soc_id(&dev, &rev) == 0 && rev > MV78XX0_A0_REV) + return; + + for_each_compatible_node(np, NULL, "marvell,mv78230-i2c") { + struct property *new_compat; + + new_compat = kzalloc(sizeof(*new_compat), GFP_KERNEL); + + new_compat->name = kstrdup("compatible", GFP_KERNEL); + new_compat->length = sizeof("marvell,mv78230-a0-i2c"); + new_compat->value = kstrdup("marvell,mv78230-a0-i2c", + GFP_KERNEL); + + of_update_property(np, new_compat); + } + return; +} + +static void __init mvebu_dt_init(void) +{ + if (of_machine_is_compatible("marvell,armadaxp")) + i2c_quirk(); + if (of_machine_is_compatible("marvell,a375-db")) + external_abort_quirk(); + + of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL); +} + +static const char * const armada_370_xp_dt_compat[] __initconst = { + "marvell,armada-370-xp", + NULL, +}; + +DT_MACHINE_START(ARMADA_370_XP_DT, "Marvell Armada 370/XP (Device Tree)") + .l2c_aux_val = 0, + .l2c_aux_mask = ~0, +/* + * The following field (.smp) is still needed to ensure backward + * compatibility with old Device Trees that were not specifying the + * cpus enable-method property. + */ + .smp = smp_ops(armada_xp_smp_ops), + .init_machine = mvebu_dt_init, + .init_irq = mvebu_init_irq, + .restart = mvebu_restart, + .reserve = mvebu_memblock_reserve, + .dt_compat = armada_370_xp_dt_compat, +MACHINE_END + +static const char * const armada_375_dt_compat[] __initconst = { + "marvell,armada375", + NULL, +}; + +DT_MACHINE_START(ARMADA_375_DT, "Marvell Armada 375 (Device Tree)") + .l2c_aux_val = 0, + .l2c_aux_mask = ~0, + .init_irq = mvebu_init_irq, + .init_machine = mvebu_dt_init, + .restart = mvebu_restart, + .dt_compat = armada_375_dt_compat, +MACHINE_END + +static const char * const armada_38x_dt_compat[] __initconst = { + "marvell,armada380", + "marvell,armada385", + NULL, +}; + +DT_MACHINE_START(ARMADA_38X_DT, "Marvell Armada 380/385 (Device Tree)") + .l2c_aux_val = 0, + .l2c_aux_mask = ~0, + .init_irq = mvebu_init_irq, + .restart = mvebu_restart, + .dt_compat = armada_38x_dt_compat, +MACHINE_END + +static const char * const armada_39x_dt_compat[] __initconst = { + "marvell,armada390", + "marvell,armada398", + NULL, +}; + +DT_MACHINE_START(ARMADA_39X_DT, "Marvell Armada 39x (Device Tree)") + .l2c_aux_val = 0, + .l2c_aux_mask = ~0, + .init_irq = mvebu_init_irq, + .restart = mvebu_restart, + .dt_compat = armada_39x_dt_compat, +MACHINE_END |