diff options
Diffstat (limited to 'kernel/arch/arm/mach-ixp4xx')
45 files changed, 8705 insertions, 0 deletions
diff --git a/kernel/arch/arm/mach-ixp4xx/Kconfig b/kernel/arch/arm/mach-ixp4xx/Kconfig new file mode 100644 index 000000000..c342dc4e8 --- /dev/null +++ b/kernel/arch/arm/mach-ixp4xx/Kconfig @@ -0,0 +1,240 @@ +if ARCH_IXP4XX + +menu "Intel IXP4xx Implementation Options" + +comment "IXP4xx Platforms" + +config MACH_NSLU2 + bool + prompt "Linksys NSLU2" + select PCI + help + Say 'Y' here if you want your kernel to support Linksys's + NSLU2 NAS device. For more information on this platform, + see http://www.nslu2-linux.org + +config MACH_AVILA + bool "Avila" + select PCI + help + Say 'Y' here if you want your kernel to support the Gateworks + Avila Network Platform. For more information on this platform, + see <file:Documentation/arm/IXP4xx>. + +config MACH_LOFT + bool "Loft" + depends on MACH_AVILA + help + Say 'Y' here if you want your kernel to support the Giant + Shoulder Inc Loft board (a minor variation on the standard + Gateworks Avila Network Platform). + +config ARCH_ADI_COYOTE + bool "Coyote" + select PCI + help + Say 'Y' here if you want your kernel to support the ADI + Engineering Coyote Gateway Reference Platform. For more + information on this platform, see <file:Documentation/arm/IXP4xx>. + +config MACH_GATEWAY7001 + bool "Gateway 7001" + select PCI + help + Say 'Y' here if you want your kernel to support Gateway's + 7001 Access Point. For more information on this platform, + see http://openwrt.org + +config MACH_WG302V2 + bool "Netgear WG302 v2 / WAG302 v2" + select PCI + help + Say 'Y' here if you want your kernel to support Netgear's + WG302 v2 or WAG302 v2 Access Points. For more information + on this platform, see http://openwrt.org + +config ARCH_IXDP425 + bool "IXDP425" + help + Say 'Y' here if you want your kernel to support Intel's + IXDP425 Development Platform (Also known as Richfield). + For more information on this platform, see <file:Documentation/arm/IXP4xx>. + +config MACH_IXDPG425 + bool "IXDPG425" + help + Say 'Y' here if you want your kernel to support Intel's + IXDPG425 Development Platform (Also known as Montajade). + For more information on this platform, see <file:Documentation/arm/IXP4xx>. + +config MACH_IXDP465 + bool "IXDP465" + help + Say 'Y' here if you want your kernel to support Intel's + IXDP465 Development Platform (Also known as BMP). + For more information on this platform, see <file:Documentation/arm/IXP4xx>. + +config MACH_GORAMO_MLR + bool "GORAMO Multi Link Router" + help + Say 'Y' here if you want your kernel to support GORAMO + MultiLink router. + +config MACH_KIXRP435 + bool "KIXRP435" + help + Say 'Y' here if you want your kernel to support Intel's + KIXRP435 Reference Platform. + For more information on this platform, see <file:Documentation/arm/IXP4xx>. + +# +# IXCDP1100 is the exact same HW as IXDP425, but with a different machine +# number from the bootloader due to marketing monkeys, so we just enable it +# by default if IXDP425 is enabled. +# +config ARCH_IXCDP1100 + bool + depends on ARCH_IXDP425 + default y + +config ARCH_PRPMC1100 + bool "PrPMC1100" + help + Say 'Y' here if you want your kernel to support the Motorola + PrPCM1100 Processor Mezanine Module. For more information on + this platform, see <file:Documentation/arm/IXP4xx>. + +config MACH_NAS100D + bool + prompt "NAS100D" + select PCI + help + Say 'Y' here if you want your kernel to support Iomega's + NAS 100d device. For more information on this platform, + see http://www.nslu2-linux.org/wiki/NAS100d/HomePage + +config MACH_DSMG600 + bool + prompt "D-Link DSM-G600 RevA" + select PCI + help + Say 'Y' here if you want your kernel to support D-Link's + DSM-G600 RevA device. For more information on this platform, + see http://www.nslu2-linux.org/wiki/DSMG600/HomePage + +config ARCH_IXDP4XX + bool + depends on ARCH_IXDP425 || MACH_IXDP465 || MACH_KIXRP435 + default y + +config MACH_FSG + bool + prompt "Freecom FSG-3" + select PCI + help + Say 'Y' here if you want your kernel to support Freecom's + FSG-3 device. For more information on this platform, + see http://www.nslu2-linux.org/wiki/FSG3/HomePage + +config MACH_ARCOM_VULCAN + bool + prompt "Arcom/Eurotech Vulcan" + select PCI + help + Say 'Y' here if you want your kernel to support Arcom's + Vulcan board. + +# +# Certain registers and IRQs are only enabled if supporting IXP465 CPUs +# +config CPU_IXP46X + bool + depends on MACH_IXDP465 + default y + +config CPU_IXP43X + bool + depends on MACH_KIXRP435 + default y + +config MACH_GTWX5715 + bool "Gemtek WX5715 (Linksys WRV54G)" + depends on ARCH_IXP4XX + select PCI + help + This board is currently inside the Linksys WRV54G Gateways. + + IXP425 - 266mhz + 32mb SDRAM + 8mb Flash + miniPCI slot 0 does not have a card connector soldered to the board + miniPCI slot 1 has an ISL3880 802.11g card (Prism54) + npe0 is connected to a Kendin KS8995M Switch (4 ports) + npe1 is the "wan" port + "Console" UART is available on J11 as console + "High Speed" UART is n/c (as far as I can tell) + 20 Pin ARM/Xscale JTAG interface on J2 + +config MACH_DEVIXP + bool "Omicron DEVIXP" + help + Say 'Y' here if you want your kernel to support the DEVIXP + board from OMICRON electronics GmbH. + +config MACH_MICCPT + bool "Omicron MICCPT" + select PCI + help + Say 'Y' here if you want your kernel to support the MICCPT + board from OMICRON electronics GmbH. + +config MACH_MIC256 + bool "Omicron MIC256" + help + Say 'Y' here if you want your kernel to support the MIC256 + board from OMICRON electronics GmbH. + +comment "IXP4xx Options" + +config IXP4XX_INDIRECT_PCI + bool "Use indirect PCI memory access" + depends on PCI + help + IXP4xx provides two methods of accessing PCI memory space: + + 1) A direct mapped window from 0x48000000 to 0x4BFFFFFF (64MB). + To access PCI via this space, we simply ioremap() the BAR + into the kernel and we can use the standard read[bwl]/write[bwl] + macros. This is the preferred method due to speed but it + limits the system to just 64MB of PCI memory. This can be + problematic if using video cards and other memory-heavy devices. + + 2) If > 64MB of memory space is required, the IXP4xx can be + configured to use indirect registers to access the whole PCI + memory space. This currently allows for up to 1 GB (0x10000000 + to 0x4FFFFFFF) of memory on the bus. The disadvantage of this + is that every PCI access requires three local register accesses + plus a spinlock, but in some cases the performance hit is + acceptable. In addition, you cannot mmap() PCI devices in this + case due to the indirect nature of the PCI window. + + By default, the direct method is used. Choose this option if you + need to use the indirect method instead. If you don't know + what you need, leave this option unselected. + +config IXP4XX_QMGR + tristate "IXP4xx Queue Manager support" + help + This driver supports IXP4xx built-in hardware queue manager + and is automatically selected by Ethernet and HSS drivers. + +config IXP4XX_NPE + tristate "IXP4xx Network Processor Engine support" + select FW_LOADER + help + This driver supports IXP4xx built-in network coprocessors + and is automatically selected by Ethernet and HSS drivers. + +endmenu + +endif diff --git a/kernel/arch/arm/mach-ixp4xx/Makefile b/kernel/arch/arm/mach-ixp4xx/Makefile new file mode 100644 index 000000000..eded94c96 --- /dev/null +++ b/kernel/arch/arm/mach-ixp4xx/Makefile @@ -0,0 +1,43 @@ +# +# Makefile for the linux kernel. +# + +obj-pci-y := +obj-pci-n := + +obj-pci-$(CONFIG_ARCH_IXDP4XX) += ixdp425-pci.o +obj-pci-$(CONFIG_MACH_AVILA) += avila-pci.o +obj-pci-$(CONFIG_MACH_IXDPG425) += ixdpg425-pci.o +obj-pci-$(CONFIG_ARCH_ADI_COYOTE) += coyote-pci.o +obj-pci-$(CONFIG_MACH_GTWX5715) += gtwx5715-pci.o +obj-pci-$(CONFIG_MACH_MICCPT) += miccpt-pci.o +obj-pci-$(CONFIG_MACH_NSLU2) += nslu2-pci.o +obj-pci-$(CONFIG_MACH_NAS100D) += nas100d-pci.o +obj-pci-$(CONFIG_MACH_DSMG600) += dsmg600-pci.o +obj-pci-$(CONFIG_MACH_GATEWAY7001) += gateway7001-pci.o +obj-pci-$(CONFIG_MACH_WG302V2) += wg302v2-pci.o +obj-pci-$(CONFIG_MACH_FSG) += fsg-pci.o +obj-pci-$(CONFIG_MACH_ARCOM_VULCAN) += vulcan-pci.o + +obj-y += common.o + +obj-$(CONFIG_ARCH_IXDP4XX) += ixdp425-setup.o +obj-$(CONFIG_MACH_AVILA) += avila-setup.o +obj-$(CONFIG_MACH_IXDPG425) += coyote-setup.o +obj-$(CONFIG_ARCH_ADI_COYOTE) += coyote-setup.o +obj-$(CONFIG_MACH_GTWX5715) += gtwx5715-setup.o +obj-$(CONFIG_MACH_DEVIXP) += omixp-setup.o +obj-$(CONFIG_MACH_MICCPT) += omixp-setup.o +obj-$(CONFIG_MACH_MIC256) += omixp-setup.o +obj-$(CONFIG_MACH_NSLU2) += nslu2-setup.o +obj-$(CONFIG_MACH_NAS100D) += nas100d-setup.o +obj-$(CONFIG_MACH_DSMG600) += dsmg600-setup.o +obj-$(CONFIG_MACH_GATEWAY7001) += gateway7001-setup.o +obj-$(CONFIG_MACH_WG302V2) += wg302v2-setup.o +obj-$(CONFIG_MACH_FSG) += fsg-setup.o +obj-$(CONFIG_MACH_GORAMO_MLR) += goramo_mlr.o +obj-$(CONFIG_MACH_ARCOM_VULCAN) += vulcan-setup.o + +obj-$(CONFIG_PCI) += $(obj-pci-$(CONFIG_PCI)) common-pci.o +obj-$(CONFIG_IXP4XX_QMGR) += ixp4xx_qmgr.o +obj-$(CONFIG_IXP4XX_NPE) += ixp4xx_npe.o diff --git a/kernel/arch/arm/mach-ixp4xx/Makefile.boot b/kernel/arch/arm/mach-ixp4xx/Makefile.boot new file mode 100644 index 000000000..9c7af91d9 --- /dev/null +++ b/kernel/arch/arm/mach-ixp4xx/Makefile.boot @@ -0,0 +1,3 @@ + zreladdr-y += 0x00008000 +params_phys-y := 0x00000100 + diff --git a/kernel/arch/arm/mach-ixp4xx/avila-pci.c b/kernel/arch/arm/mach-ixp4xx/avila-pci.c new file mode 100644 index 000000000..548c7d43a --- /dev/null +++ b/kernel/arch/arm/mach-ixp4xx/avila-pci.c @@ -0,0 +1,81 @@ +/* + * arch/arm/mach-ixp4xx/avila-pci.c + * + * Gateworks Avila board-level PCI initialization + * + * Author: Michael-Luke Jones <mlj28@cam.ac.uk> + * + * Based on ixdp-pci.c + * Copyright (C) 2002 Intel Corporation. + * Copyright (C) 2003-2004 MontaVista Software, Inc. + * + * Maintainer: Deepak Saxena <dsaxena@plexity.net> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + */ + +#include <linux/kernel.h> +#include <linux/pci.h> +#include <linux/init.h> +#include <linux/irq.h> +#include <linux/delay.h> +#include <asm/mach/pci.h> +#include <asm/irq.h> +#include <mach/hardware.h> +#include <asm/mach-types.h> + +#define AVILA_MAX_DEV 4 +#define LOFT_MAX_DEV 6 +#define IRQ_LINES 4 + +/* PCI controller GPIO to IRQ pin mappings */ +#define INTA 11 +#define INTB 10 +#define INTC 9 +#define INTD 8 + +void __init avila_pci_preinit(void) +{ + irq_set_irq_type(IXP4XX_GPIO_IRQ(INTA), IRQ_TYPE_LEVEL_LOW); + irq_set_irq_type(IXP4XX_GPIO_IRQ(INTB), IRQ_TYPE_LEVEL_LOW); + irq_set_irq_type(IXP4XX_GPIO_IRQ(INTC), IRQ_TYPE_LEVEL_LOW); + irq_set_irq_type(IXP4XX_GPIO_IRQ(INTD), IRQ_TYPE_LEVEL_LOW); + ixp4xx_pci_preinit(); +} + +static int __init avila_map_irq(const struct pci_dev *dev, u8 slot, u8 pin) +{ + static int pci_irq_table[IRQ_LINES] = { + IXP4XX_GPIO_IRQ(INTA), + IXP4XX_GPIO_IRQ(INTB), + IXP4XX_GPIO_IRQ(INTC), + IXP4XX_GPIO_IRQ(INTD) + }; + + if (slot >= 1 && + slot <= (machine_is_loft() ? LOFT_MAX_DEV : AVILA_MAX_DEV) && + pin >= 1 && pin <= IRQ_LINES) + return pci_irq_table[(slot + pin - 2) % 4]; + + return -1; +} + +struct hw_pci avila_pci __initdata = { + .nr_controllers = 1, + .ops = &ixp4xx_ops, + .preinit = avila_pci_preinit, + .setup = ixp4xx_setup, + .map_irq = avila_map_irq, +}; + +int __init avila_pci_init(void) +{ + if (machine_is_avila() || machine_is_loft()) + pci_common_init(&avila_pci); + return 0; +} + +subsys_initcall(avila_pci_init); diff --git a/kernel/arch/arm/mach-ixp4xx/avila-setup.c b/kernel/arch/arm/mach-ixp4xx/avila-setup.c new file mode 100644 index 000000000..6beec150c --- /dev/null +++ b/kernel/arch/arm/mach-ixp4xx/avila-setup.c @@ -0,0 +1,199 @@ +/* + * arch/arm/mach-ixp4xx/avila-setup.c + * + * Gateworks Avila board-setup + * + * Author: Michael-Luke Jones <mlj28@cam.ac.uk> + * + * Based on ixdp-setup.c + * Copyright (C) 2003-2005 MontaVista Software, Inc. + * + * Author: Deepak Saxena <dsaxena@plexity.net> + */ + +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/device.h> +#include <linux/serial.h> +#include <linux/tty.h> +#include <linux/serial_8250.h> +#include <linux/i2c-gpio.h> +#include <asm/types.h> +#include <asm/setup.h> +#include <asm/memory.h> +#include <mach/hardware.h> +#include <asm/mach-types.h> +#include <asm/irq.h> +#include <asm/mach/arch.h> +#include <asm/mach/flash.h> + +#define AVILA_SDA_PIN 7 +#define AVILA_SCL_PIN 6 + +static struct flash_platform_data avila_flash_data = { + .map_name = "cfi_probe", + .width = 2, +}; + +static struct resource avila_flash_resource = { + .flags = IORESOURCE_MEM, +}; + +static struct platform_device avila_flash = { + .name = "IXP4XX-Flash", + .id = 0, + .dev = { + .platform_data = &avila_flash_data, + }, + .num_resources = 1, + .resource = &avila_flash_resource, +}; + +static struct i2c_gpio_platform_data avila_i2c_gpio_data = { + .sda_pin = AVILA_SDA_PIN, + .scl_pin = AVILA_SCL_PIN, +}; + +static struct platform_device avila_i2c_gpio = { + .name = "i2c-gpio", + .id = 0, + .dev = { + .platform_data = &avila_i2c_gpio_data, + }, +}; + +static struct resource avila_uart_resources[] = { + { + .start = IXP4XX_UART1_BASE_PHYS, + .end = IXP4XX_UART1_BASE_PHYS + 0x0fff, + .flags = IORESOURCE_MEM + }, + { + .start = IXP4XX_UART2_BASE_PHYS, + .end = IXP4XX_UART2_BASE_PHYS + 0x0fff, + .flags = IORESOURCE_MEM + } +}; + +static struct plat_serial8250_port avila_uart_data[] = { + { + .mapbase = IXP4XX_UART1_BASE_PHYS, + .membase = (char *)IXP4XX_UART1_BASE_VIRT + REG_OFFSET, + .irq = IRQ_IXP4XX_UART1, + .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST, + .iotype = UPIO_MEM, + .regshift = 2, + .uartclk = IXP4XX_UART_XTAL, + }, + { + .mapbase = IXP4XX_UART2_BASE_PHYS, + .membase = (char *)IXP4XX_UART2_BASE_VIRT + REG_OFFSET, + .irq = IRQ_IXP4XX_UART2, + .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST, + .iotype = UPIO_MEM, + .regshift = 2, + .uartclk = IXP4XX_UART_XTAL, + }, + { }, +}; + +static struct platform_device avila_uart = { + .name = "serial8250", + .id = PLAT8250_DEV_PLATFORM, + .dev.platform_data = avila_uart_data, + .num_resources = 2, + .resource = avila_uart_resources +}; + +static struct resource avila_pata_resources[] = { + { + .flags = IORESOURCE_MEM + }, + { + .flags = IORESOURCE_MEM, + }, + { + .name = "intrq", + .start = IRQ_IXP4XX_GPIO12, + .end = IRQ_IXP4XX_GPIO12, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct ixp4xx_pata_data avila_pata_data = { + .cs0_bits = 0xbfff0043, + .cs1_bits = 0xbfff0043, +}; + +static struct platform_device avila_pata = { + .name = "pata_ixp4xx_cf", + .id = 0, + .dev.platform_data = &avila_pata_data, + .num_resources = ARRAY_SIZE(avila_pata_resources), + .resource = avila_pata_resources, +}; + +static struct platform_device *avila_devices[] __initdata = { + &avila_i2c_gpio, + &avila_flash, + &avila_uart +}; + +static void __init avila_init(void) +{ + ixp4xx_sys_init(); + + avila_flash_resource.start = IXP4XX_EXP_BUS_BASE(0); + avila_flash_resource.end = + IXP4XX_EXP_BUS_BASE(0) + ixp4xx_exp_bus_size - 1; + + platform_add_devices(avila_devices, ARRAY_SIZE(avila_devices)); + + avila_pata_resources[0].start = IXP4XX_EXP_BUS_BASE(1); + avila_pata_resources[0].end = IXP4XX_EXP_BUS_END(1); + + avila_pata_resources[1].start = IXP4XX_EXP_BUS_BASE(2); + avila_pata_resources[1].end = IXP4XX_EXP_BUS_END(2); + + avila_pata_data.cs0_cfg = IXP4XX_EXP_CS1; + avila_pata_data.cs1_cfg = IXP4XX_EXP_CS2; + + platform_device_register(&avila_pata); + +} + +MACHINE_START(AVILA, "Gateworks Avila Network Platform") + /* Maintainer: Deepak Saxena <dsaxena@plexity.net> */ + .map_io = ixp4xx_map_io, + .init_early = ixp4xx_init_early, + .init_irq = ixp4xx_init_irq, + .init_time = ixp4xx_timer_init, + .atag_offset = 0x100, + .init_machine = avila_init, +#if defined(CONFIG_PCI) + .dma_zone_size = SZ_64M, +#endif + .restart = ixp4xx_restart, +MACHINE_END + + /* + * Loft is functionally equivalent to Avila except that it has a + * different number for the maximum PCI devices. The MACHINE + * structure below is identical to Avila except for the comment. + */ +#ifdef CONFIG_MACH_LOFT +MACHINE_START(LOFT, "Giant Shoulder Inc Loft board") + /* Maintainer: Tom Billman <kernel@giantshoulderinc.com> */ + .map_io = ixp4xx_map_io, + .init_early = ixp4xx_init_early, + .init_irq = ixp4xx_init_irq, + .init_time = ixp4xx_timer_init, + .atag_offset = 0x100, + .init_machine = avila_init, +#if defined(CONFIG_PCI) + .dma_zone_size = SZ_64M, +#endif + .restart = ixp4xx_restart, +MACHINE_END +#endif + diff --git a/kernel/arch/arm/mach-ixp4xx/common-pci.c b/kernel/arch/arm/mach-ixp4xx/common-pci.c new file mode 100644 index 000000000..4977296f0 --- /dev/null +++ b/kernel/arch/arm/mach-ixp4xx/common-pci.c @@ -0,0 +1,455 @@ +/* + * arch/arm/mach-ixp4xx/common-pci.c + * + * IXP4XX PCI routines for all platforms + * + * Maintainer: Deepak Saxena <dsaxena@plexity.net> + * + * Copyright (C) 2002 Intel Corporation. + * Copyright (C) 2003 Greg Ungerer <gerg@snapgear.com> + * Copyright (C) 2003-2004 MontaVista Software, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + */ + +#include <linux/sched.h> +#include <linux/kernel.h> +#include <linux/pci.h> +#include <linux/interrupt.h> +#include <linux/mm.h> +#include <linux/init.h> +#include <linux/ioport.h> +#include <linux/slab.h> +#include <linux/delay.h> +#include <linux/device.h> +#include <linux/io.h> +#include <linux/export.h> +#include <asm/dma-mapping.h> + +#include <asm/cputype.h> +#include <asm/irq.h> +#include <asm/sizes.h> +#include <asm/mach/pci.h> +#include <mach/hardware.h> + + +/* + * IXP4xx PCI read function is dependent on whether we are + * running A0 or B0 (AppleGate) silicon. + */ +int (*ixp4xx_pci_read)(u32 addr, u32 cmd, u32* data); + +/* + * Base address for PCI regsiter region + */ +unsigned long ixp4xx_pci_reg_base = 0; + +/* + * PCI cfg an I/O routines are done by programming a + * command/byte enable register, and then read/writing + * the data from a data regsiter. We need to ensure + * these transactions are atomic or we will end up + * with corrupt data on the bus or in a driver. + */ +static DEFINE_RAW_SPINLOCK(ixp4xx_pci_lock); + +/* + * Read from PCI config space + */ +static void crp_read(u32 ad_cbe, u32 *data) +{ + unsigned long flags; + raw_spin_lock_irqsave(&ixp4xx_pci_lock, flags); + *PCI_CRP_AD_CBE = ad_cbe; + *data = *PCI_CRP_RDATA; + raw_spin_unlock_irqrestore(&ixp4xx_pci_lock, flags); +} + +/* + * Write to PCI config space + */ +static void crp_write(u32 ad_cbe, u32 data) +{ + unsigned long flags; + raw_spin_lock_irqsave(&ixp4xx_pci_lock, flags); + *PCI_CRP_AD_CBE = CRP_AD_CBE_WRITE | ad_cbe; + *PCI_CRP_WDATA = data; + raw_spin_unlock_irqrestore(&ixp4xx_pci_lock, flags); +} + +static inline int check_master_abort(void) +{ + /* check Master Abort bit after access */ + unsigned long isr = *PCI_ISR; + + if (isr & PCI_ISR_PFE) { + /* make sure the Master Abort bit is reset */ + *PCI_ISR = PCI_ISR_PFE; + pr_debug("%s failed\n", __func__); + return 1; + } + + return 0; +} + +int ixp4xx_pci_read_errata(u32 addr, u32 cmd, u32* data) +{ + unsigned long flags; + int retval = 0; + int i; + + raw_spin_lock_irqsave(&ixp4xx_pci_lock, flags); + + *PCI_NP_AD = addr; + + /* + * PCI workaround - only works if NP PCI space reads have + * no side effects!!! Read 8 times. last one will be good. + */ + for (i = 0; i < 8; i++) { + *PCI_NP_CBE = cmd; + *data = *PCI_NP_RDATA; + *data = *PCI_NP_RDATA; + } + + if(check_master_abort()) + retval = 1; + + raw_spin_unlock_irqrestore(&ixp4xx_pci_lock, flags); + return retval; +} + +int ixp4xx_pci_read_no_errata(u32 addr, u32 cmd, u32* data) +{ + unsigned long flags; + int retval = 0; + + raw_spin_lock_irqsave(&ixp4xx_pci_lock, flags); + + *PCI_NP_AD = addr; + + /* set up and execute the read */ + *PCI_NP_CBE = cmd; + + /* the result of the read is now in NP_RDATA */ + *data = *PCI_NP_RDATA; + + if(check_master_abort()) + retval = 1; + + raw_spin_unlock_irqrestore(&ixp4xx_pci_lock, flags); + return retval; +} + +int ixp4xx_pci_write(u32 addr, u32 cmd, u32 data) +{ + unsigned long flags; + int retval = 0; + + raw_spin_lock_irqsave(&ixp4xx_pci_lock, flags); + + *PCI_NP_AD = addr; + + /* set up the write */ + *PCI_NP_CBE = cmd; + + /* execute the write by writing to NP_WDATA */ + *PCI_NP_WDATA = data; + + if(check_master_abort()) + retval = 1; + + raw_spin_unlock_irqrestore(&ixp4xx_pci_lock, flags); + return retval; +} + +static u32 ixp4xx_config_addr(u8 bus_num, u16 devfn, int where) +{ + u32 addr; + if (!bus_num) { + /* type 0 */ + addr = BIT(32-PCI_SLOT(devfn)) | ((PCI_FUNC(devfn)) << 8) | + (where & ~3); + } else { + /* type 1 */ + addr = (bus_num << 16) | ((PCI_SLOT(devfn)) << 11) | + ((PCI_FUNC(devfn)) << 8) | (where & ~3) | 1; + } + return addr; +} + +/* + * Mask table, bits to mask for quantity of size 1, 2 or 4 bytes. + * 0 and 3 are not valid indexes... + */ +static u32 bytemask[] = { + /*0*/ 0, + /*1*/ 0xff, + /*2*/ 0xffff, + /*3*/ 0, + /*4*/ 0xffffffff, +}; + +static u32 local_byte_lane_enable_bits(u32 n, int size) +{ + if (size == 1) + return (0xf & ~BIT(n)) << CRP_AD_CBE_BESL; + if (size == 2) + return (0xf & ~(BIT(n) | BIT(n+1))) << CRP_AD_CBE_BESL; + if (size == 4) + return 0; + return 0xffffffff; +} + +static int local_read_config(int where, int size, u32 *value) +{ + u32 n, data; + pr_debug("local_read_config from %d size %d\n", where, size); + n = where % 4; + crp_read(where & ~3, &data); + *value = (data >> (8*n)) & bytemask[size]; + pr_debug("local_read_config read %#x\n", *value); + return PCIBIOS_SUCCESSFUL; +} + +static int local_write_config(int where, int size, u32 value) +{ + u32 n, byte_enables, data; + pr_debug("local_write_config %#x to %d size %d\n", value, where, size); + n = where % 4; + byte_enables = local_byte_lane_enable_bits(n, size); + if (byte_enables == 0xffffffff) + return PCIBIOS_BAD_REGISTER_NUMBER; + data = value << (8*n); + crp_write((where & ~3) | byte_enables, data); + return PCIBIOS_SUCCESSFUL; +} + +static u32 byte_lane_enable_bits(u32 n, int size) +{ + if (size == 1) + return (0xf & ~BIT(n)) << 4; + if (size == 2) + return (0xf & ~(BIT(n) | BIT(n+1))) << 4; + if (size == 4) + return 0; + return 0xffffffff; +} + +static int ixp4xx_pci_read_config(struct pci_bus *bus, unsigned int devfn, int where, int size, u32 *value) +{ + u32 n, byte_enables, addr, data; + u8 bus_num = bus->number; + + pr_debug("read_config from %d size %d dev %d:%d:%d\n", where, size, + bus_num, PCI_SLOT(devfn), PCI_FUNC(devfn)); + + *value = 0xffffffff; + n = where % 4; + byte_enables = byte_lane_enable_bits(n, size); + if (byte_enables == 0xffffffff) + return PCIBIOS_BAD_REGISTER_NUMBER; + + addr = ixp4xx_config_addr(bus_num, devfn, where); + if (ixp4xx_pci_read(addr, byte_enables | NP_CMD_CONFIGREAD, &data)) + return PCIBIOS_DEVICE_NOT_FOUND; + + *value = (data >> (8*n)) & bytemask[size]; + pr_debug("read_config_byte read %#x\n", *value); + return PCIBIOS_SUCCESSFUL; +} + +static int ixp4xx_pci_write_config(struct pci_bus *bus, unsigned int devfn, int where, int size, u32 value) +{ + u32 n, byte_enables, addr, data; + u8 bus_num = bus->number; + + pr_debug("write_config_byte %#x to %d size %d dev %d:%d:%d\n", value, where, + size, bus_num, PCI_SLOT(devfn), PCI_FUNC(devfn)); + + n = where % 4; + byte_enables = byte_lane_enable_bits(n, size); + if (byte_enables == 0xffffffff) + return PCIBIOS_BAD_REGISTER_NUMBER; + + addr = ixp4xx_config_addr(bus_num, devfn, where); + data = value << (8*n); + if (ixp4xx_pci_write(addr, byte_enables | NP_CMD_CONFIGWRITE, data)) + return PCIBIOS_DEVICE_NOT_FOUND; + + return PCIBIOS_SUCCESSFUL; +} + +struct pci_ops ixp4xx_ops = { + .read = ixp4xx_pci_read_config, + .write = ixp4xx_pci_write_config, +}; + +/* + * PCI abort handler + */ +static int abort_handler(unsigned long addr, unsigned int fsr, struct pt_regs *regs) +{ + u32 isr, status; + + isr = *PCI_ISR; + local_read_config(PCI_STATUS, 2, &status); + pr_debug("PCI: abort_handler addr = %#lx, isr = %#x, " + "status = %#x\n", addr, isr, status); + + /* make sure the Master Abort bit is reset */ + *PCI_ISR = PCI_ISR_PFE; + status |= PCI_STATUS_REC_MASTER_ABORT; + local_write_config(PCI_STATUS, 2, status); + + /* + * If it was an imprecise abort, then we need to correct the + * return address to be _after_ the instruction. + */ + if (fsr & (1 << 10)) + regs->ARM_pc += 4; + + return 0; +} + +void __init ixp4xx_pci_preinit(void) +{ + unsigned long cpuid = read_cpuid_id(); + +#ifdef CONFIG_IXP4XX_INDIRECT_PCI + pcibios_min_mem = 0x10000000; /* 1 GB of indirect PCI MMIO space */ +#else + pcibios_min_mem = 0x48000000; /* 64 MB of PCI MMIO space */ +#endif + /* + * Determine which PCI read method to use. + * Rev 0 IXP425 requires workaround. + */ + if (!(cpuid & 0xf) && cpu_is_ixp42x()) { + printk("PCI: IXP42x A0 silicon detected - " + "PCI Non-Prefetch Workaround Enabled\n"); + ixp4xx_pci_read = ixp4xx_pci_read_errata; + } else + ixp4xx_pci_read = ixp4xx_pci_read_no_errata; + + + /* hook in our fault handler for PCI errors */ + hook_fault_code(16+6, abort_handler, SIGBUS, 0, + "imprecise external abort"); + + pr_debug("setup PCI-AHB(inbound) and AHB-PCI(outbound) address mappings\n"); + + /* + * We use identity AHB->PCI address translation + * in the 0x48000000 to 0x4bffffff address space + */ + *PCI_PCIMEMBASE = 0x48494A4B; + + /* + * We also use identity PCI->AHB address translation + * in 4 16MB BARs that begin at the physical memory start + */ + *PCI_AHBMEMBASE = (PHYS_OFFSET & 0xFF000000) + + ((PHYS_OFFSET & 0xFF000000) >> 8) + + ((PHYS_OFFSET & 0xFF000000) >> 16) + + ((PHYS_OFFSET & 0xFF000000) >> 24) + + 0x00010203; + + if (*PCI_CSR & PCI_CSR_HOST) { + printk("PCI: IXP4xx is host\n"); + + pr_debug("setup BARs in controller\n"); + + /* + * We configure the PCI inbound memory windows to be + * 1:1 mapped to SDRAM + */ + local_write_config(PCI_BASE_ADDRESS_0, 4, PHYS_OFFSET); + local_write_config(PCI_BASE_ADDRESS_1, 4, PHYS_OFFSET + SZ_16M); + local_write_config(PCI_BASE_ADDRESS_2, 4, PHYS_OFFSET + SZ_32M); + local_write_config(PCI_BASE_ADDRESS_3, 4, + PHYS_OFFSET + SZ_32M + SZ_16M); + + /* + * Enable CSR window at 64 MiB to allow PCI masters + * to continue prefetching past 64 MiB boundary. + */ + local_write_config(PCI_BASE_ADDRESS_4, 4, PHYS_OFFSET + SZ_64M); + + /* + * Enable the IO window to be way up high, at 0xfffffc00 + */ + local_write_config(PCI_BASE_ADDRESS_5, 4, 0xfffffc01); + local_write_config(0x40, 4, 0x000080FF); /* No TRDY time limit */ + } else { + printk("PCI: IXP4xx is target - No bus scan performed\n"); + } + + printk("PCI: IXP4xx Using %s access for memory space\n", +#ifndef CONFIG_IXP4XX_INDIRECT_PCI + "direct" +#else + "indirect" +#endif + ); + + pr_debug("clear error bits in ISR\n"); + *PCI_ISR = PCI_ISR_PSE | PCI_ISR_PFE | PCI_ISR_PPE | PCI_ISR_AHBE; + + /* + * Set Initialize Complete in PCI Control Register: allow IXP4XX to + * respond to PCI configuration cycles. Specify that the AHB bus is + * operating in big endian mode. Set up byte lane swapping between + * little-endian PCI and the big-endian AHB bus + */ +#ifdef __ARMEB__ + *PCI_CSR = PCI_CSR_IC | PCI_CSR_ABE | PCI_CSR_PDS | PCI_CSR_ADS; +#else + *PCI_CSR = PCI_CSR_IC | PCI_CSR_ABE; +#endif + + pr_debug("DONE\n"); +} + +int ixp4xx_setup(int nr, struct pci_sys_data *sys) +{ + struct resource *res; + + if (nr >= 1) + return 0; + + res = kzalloc(sizeof(*res) * 2, GFP_KERNEL); + if (res == NULL) { + /* + * If we're out of memory this early, something is wrong, + * so we might as well catch it here. + */ + panic("PCI: unable to allocate resources?\n"); + } + + local_write_config(PCI_COMMAND, 2, PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY); + + res[0].name = "PCI I/O Space"; + res[0].start = 0x00000000; + res[0].end = 0x0000ffff; + res[0].flags = IORESOURCE_IO; + + res[1].name = "PCI Memory Space"; + res[1].start = PCIBIOS_MIN_MEM; + res[1].end = PCIBIOS_MAX_MEM; + res[1].flags = IORESOURCE_MEM; + + request_resource(&ioport_resource, &res[0]); + request_resource(&iomem_resource, &res[1]); + + pci_add_resource_offset(&sys->resources, &res[0], sys->io_offset); + pci_add_resource_offset(&sys->resources, &res[1], sys->mem_offset); + + return 1; +} + +EXPORT_SYMBOL(ixp4xx_pci_read); +EXPORT_SYMBOL(ixp4xx_pci_write); diff --git a/kernel/arch/arm/mach-ixp4xx/common.c b/kernel/arch/arm/mach-ixp4xx/common.c new file mode 100644 index 000000000..8537d4c41 --- /dev/null +++ b/kernel/arch/arm/mach-ixp4xx/common.c @@ -0,0 +1,672 @@ +/* + * arch/arm/mach-ixp4xx/common.c + * + * Generic code shared across all IXP4XX platforms + * + * Maintainer: Deepak Saxena <dsaxena@plexity.net> + * + * Copyright 2002 (c) Intel Corporation + * Copyright 2003-2004 (c) MontaVista, Software, Inc. + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#include <linux/kernel.h> +#include <linux/mm.h> +#include <linux/init.h> +#include <linux/serial.h> +#include <linux/tty.h> +#include <linux/platform_device.h> +#include <linux/serial_core.h> +#include <linux/interrupt.h> +#include <linux/bitops.h> +#include <linux/time.h> +#include <linux/clocksource.h> +#include <linux/clockchips.h> +#include <linux/io.h> +#include <linux/export.h> +#include <linux/gpio.h> +#include <linux/cpu.h> +#include <linux/pci.h> +#include <linux/sched_clock.h> +#include <mach/udc.h> +#include <mach/hardware.h> +#include <mach/io.h> +#include <asm/uaccess.h> +#include <asm/pgtable.h> +#include <asm/page.h> +#include <asm/irq.h> +#include <asm/system_misc.h> +#include <asm/mach/map.h> +#include <asm/mach/irq.h> +#include <asm/mach/time.h> + +#define IXP4XX_TIMER_FREQ 66666000 + +/* + * The timer register doesn't allow to specify the two least significant bits of + * the timeout value and assumes them being zero. So make sure IXP4XX_LATCH is + * the best value with the two least significant bits unset. + */ +#define IXP4XX_LATCH DIV_ROUND_CLOSEST(IXP4XX_TIMER_FREQ, \ + (IXP4XX_OST_RELOAD_MASK + 1) * HZ) * \ + (IXP4XX_OST_RELOAD_MASK + 1) + +static void __init ixp4xx_clocksource_init(void); +static void __init ixp4xx_clockevent_init(void); +static struct clock_event_device clockevent_ixp4xx; + +/************************************************************************* + * IXP4xx chipset I/O mapping + *************************************************************************/ +static struct map_desc ixp4xx_io_desc[] __initdata = { + { /* UART, Interrupt ctrl, GPIO, timers, NPEs, MACs, USB .... */ + .virtual = (unsigned long)IXP4XX_PERIPHERAL_BASE_VIRT, + .pfn = __phys_to_pfn(IXP4XX_PERIPHERAL_BASE_PHYS), + .length = IXP4XX_PERIPHERAL_REGION_SIZE, + .type = MT_DEVICE + }, { /* Expansion Bus Config Registers */ + .virtual = (unsigned long)IXP4XX_EXP_CFG_BASE_VIRT, + .pfn = __phys_to_pfn(IXP4XX_EXP_CFG_BASE_PHYS), + .length = IXP4XX_EXP_CFG_REGION_SIZE, + .type = MT_DEVICE + }, { /* PCI Registers */ + .virtual = (unsigned long)IXP4XX_PCI_CFG_BASE_VIRT, + .pfn = __phys_to_pfn(IXP4XX_PCI_CFG_BASE_PHYS), + .length = IXP4XX_PCI_CFG_REGION_SIZE, + .type = MT_DEVICE + }, { /* Queue Manager */ + .virtual = (unsigned long)IXP4XX_QMGR_BASE_VIRT, + .pfn = __phys_to_pfn(IXP4XX_QMGR_BASE_PHYS), + .length = IXP4XX_QMGR_REGION_SIZE, + .type = MT_DEVICE + }, +}; + +void __init ixp4xx_map_io(void) +{ + iotable_init(ixp4xx_io_desc, ARRAY_SIZE(ixp4xx_io_desc)); +} + +/* + * GPIO-functions + */ +/* + * The following converted to the real HW bits the gpio_line_config + */ +/* GPIO pin types */ +#define IXP4XX_GPIO_OUT 0x1 +#define IXP4XX_GPIO_IN 0x2 + +/* GPIO signal types */ +#define IXP4XX_GPIO_LOW 0 +#define IXP4XX_GPIO_HIGH 1 + +/* GPIO Clocks */ +#define IXP4XX_GPIO_CLK_0 14 +#define IXP4XX_GPIO_CLK_1 15 + +static void gpio_line_config(u8 line, u32 direction) +{ + if (direction == IXP4XX_GPIO_IN) + *IXP4XX_GPIO_GPOER |= (1 << line); + else + *IXP4XX_GPIO_GPOER &= ~(1 << line); +} + +static void gpio_line_get(u8 line, int *value) +{ + *value = (*IXP4XX_GPIO_GPINR >> line) & 0x1; +} + +static void gpio_line_set(u8 line, int value) +{ + if (value == IXP4XX_GPIO_HIGH) + *IXP4XX_GPIO_GPOUTR |= (1 << line); + else if (value == IXP4XX_GPIO_LOW) + *IXP4XX_GPIO_GPOUTR &= ~(1 << line); +} + +/************************************************************************* + * IXP4xx chipset IRQ handling + * + * TODO: GPIO IRQs should be marked invalid until the user of the IRQ + * (be it PCI or something else) configures that GPIO line + * as an IRQ. + **************************************************************************/ +enum ixp4xx_irq_type { + IXP4XX_IRQ_LEVEL, IXP4XX_IRQ_EDGE +}; + +/* Each bit represents an IRQ: 1: edge-triggered, 0: level triggered */ +static unsigned long long ixp4xx_irq_edge = 0; + +/* + * IRQ -> GPIO mapping table + */ +static signed char irq2gpio[32] = { + -1, -1, -1, -1, -1, -1, 0, 1, + -1, -1, -1, -1, -1, -1, -1, -1, + -1, -1, -1, 2, 3, 4, 5, 6, + 7, 8, 9, 10, 11, 12, -1, -1, +}; + +static int ixp4xx_gpio_to_irq(struct gpio_chip *chip, unsigned gpio) +{ + int irq; + + for (irq = 0; irq < 32; irq++) { + if (irq2gpio[irq] == gpio) + return irq; + } + return -EINVAL; +} + +static int ixp4xx_set_irq_type(struct irq_data *d, unsigned int type) +{ + int line = irq2gpio[d->irq]; + u32 int_style; + enum ixp4xx_irq_type irq_type; + volatile u32 *int_reg; + + /* + * Only for GPIO IRQs + */ + if (line < 0) + return -EINVAL; + + switch (type){ + case IRQ_TYPE_EDGE_BOTH: + int_style = IXP4XX_GPIO_STYLE_TRANSITIONAL; + irq_type = IXP4XX_IRQ_EDGE; + break; + case IRQ_TYPE_EDGE_RISING: + int_style = IXP4XX_GPIO_STYLE_RISING_EDGE; + irq_type = IXP4XX_IRQ_EDGE; + break; + case IRQ_TYPE_EDGE_FALLING: + int_style = IXP4XX_GPIO_STYLE_FALLING_EDGE; + irq_type = IXP4XX_IRQ_EDGE; + break; + case IRQ_TYPE_LEVEL_HIGH: + int_style = IXP4XX_GPIO_STYLE_ACTIVE_HIGH; + irq_type = IXP4XX_IRQ_LEVEL; + break; + case IRQ_TYPE_LEVEL_LOW: + int_style = IXP4XX_GPIO_STYLE_ACTIVE_LOW; + irq_type = IXP4XX_IRQ_LEVEL; + break; + default: + return -EINVAL; + } + + if (irq_type == IXP4XX_IRQ_EDGE) + ixp4xx_irq_edge |= (1 << d->irq); + else + ixp4xx_irq_edge &= ~(1 << d->irq); + + if (line >= 8) { /* pins 8-15 */ + line -= 8; + int_reg = IXP4XX_GPIO_GPIT2R; + } else { /* pins 0-7 */ + int_reg = IXP4XX_GPIO_GPIT1R; + } + + /* Clear the style for the appropriate pin */ + *int_reg &= ~(IXP4XX_GPIO_STYLE_CLEAR << + (line * IXP4XX_GPIO_STYLE_SIZE)); + + *IXP4XX_GPIO_GPISR = (1 << line); + + /* Set the new style */ + *int_reg |= (int_style << (line * IXP4XX_GPIO_STYLE_SIZE)); + + /* Configure the line as an input */ + gpio_line_config(irq2gpio[d->irq], IXP4XX_GPIO_IN); + + return 0; +} + +static void ixp4xx_irq_mask(struct irq_data *d) +{ + if ((cpu_is_ixp46x() || cpu_is_ixp43x()) && d->irq >= 32) + *IXP4XX_ICMR2 &= ~(1 << (d->irq - 32)); + else + *IXP4XX_ICMR &= ~(1 << d->irq); +} + +static void ixp4xx_irq_ack(struct irq_data *d) +{ + int line = (d->irq < 32) ? irq2gpio[d->irq] : -1; + + if (line >= 0) + *IXP4XX_GPIO_GPISR = (1 << line); +} + +/* + * Level triggered interrupts on GPIO lines can only be cleared when the + * interrupt condition disappears. + */ +static void ixp4xx_irq_unmask(struct irq_data *d) +{ + if (!(ixp4xx_irq_edge & (1 << d->irq))) + ixp4xx_irq_ack(d); + + if ((cpu_is_ixp46x() || cpu_is_ixp43x()) && d->irq >= 32) + *IXP4XX_ICMR2 |= (1 << (d->irq - 32)); + else + *IXP4XX_ICMR |= (1 << d->irq); +} + +static struct irq_chip ixp4xx_irq_chip = { + .name = "IXP4xx", + .irq_ack = ixp4xx_irq_ack, + .irq_mask = ixp4xx_irq_mask, + .irq_unmask = ixp4xx_irq_unmask, + .irq_set_type = ixp4xx_set_irq_type, +}; + +void __init ixp4xx_init_irq(void) +{ + int i = 0; + + /* + * ixp4xx does not implement the XScale PWRMODE register + * so it must not call cpu_do_idle(). + */ + cpu_idle_poll_ctrl(true); + + /* Route all sources to IRQ instead of FIQ */ + *IXP4XX_ICLR = 0x0; + + /* Disable all interrupt */ + *IXP4XX_ICMR = 0x0; + + if (cpu_is_ixp46x() || cpu_is_ixp43x()) { + /* Route upper 32 sources to IRQ instead of FIQ */ + *IXP4XX_ICLR2 = 0x00; + + /* Disable upper 32 interrupts */ + *IXP4XX_ICMR2 = 0x00; + } + + /* Default to all level triggered */ + for(i = 0; i < NR_IRQS; i++) { + irq_set_chip_and_handler(i, &ixp4xx_irq_chip, + handle_level_irq); + set_irq_flags(i, IRQF_VALID); + } +} + + +/************************************************************************* + * IXP4xx timer tick + * We use OS timer1 on the CPU for the timer tick and the timestamp + * counter as a source of real clock ticks to account for missed jiffies. + *************************************************************************/ + +static irqreturn_t ixp4xx_timer_interrupt(int irq, void *dev_id) +{ + struct clock_event_device *evt = dev_id; + + /* Clear Pending Interrupt by writing '1' to it */ + *IXP4XX_OSST = IXP4XX_OSST_TIMER_1_PEND; + + evt->event_handler(evt); + + return IRQ_HANDLED; +} + +static struct irqaction ixp4xx_timer_irq = { + .name = "timer1", + .flags = IRQF_TIMER | IRQF_IRQPOLL, + .handler = ixp4xx_timer_interrupt, + .dev_id = &clockevent_ixp4xx, +}; + +void __init ixp4xx_timer_init(void) +{ + /* Reset/disable counter */ + *IXP4XX_OSRT1 = 0; + + /* Clear Pending Interrupt by writing '1' to it */ + *IXP4XX_OSST = IXP4XX_OSST_TIMER_1_PEND; + + /* Reset time-stamp counter */ + *IXP4XX_OSTS = 0; + + /* Connect the interrupt handler and enable the interrupt */ + setup_irq(IRQ_IXP4XX_TIMER1, &ixp4xx_timer_irq); + + ixp4xx_clocksource_init(); + ixp4xx_clockevent_init(); +} + +static struct pxa2xx_udc_mach_info ixp4xx_udc_info; + +void __init ixp4xx_set_udc_info(struct pxa2xx_udc_mach_info *info) +{ + memcpy(&ixp4xx_udc_info, info, sizeof *info); +} + +static struct resource ixp4xx_udc_resources[] = { + [0] = { + .start = 0xc800b000, + .end = 0xc800bfff, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = IRQ_IXP4XX_USB, + .end = IRQ_IXP4XX_USB, + .flags = IORESOURCE_IRQ, + }, +}; + +/* + * USB device controller. The IXP4xx uses the same controller as PXA25X, + * so we just use the same device. + */ +static struct platform_device ixp4xx_udc_device = { + .name = "pxa25x-udc", + .id = -1, + .num_resources = 2, + .resource = ixp4xx_udc_resources, + .dev = { + .platform_data = &ixp4xx_udc_info, + }, +}; + +static struct platform_device *ixp4xx_devices[] __initdata = { + &ixp4xx_udc_device, +}; + +static struct resource ixp46x_i2c_resources[] = { + [0] = { + .start = 0xc8011000, + .end = 0xc801101c, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = IRQ_IXP4XX_I2C, + .end = IRQ_IXP4XX_I2C, + .flags = IORESOURCE_IRQ + } +}; + +/* + * I2C controller. The IXP46x uses the same block as the IOP3xx, so + * we just use the same device name. + */ +static struct platform_device ixp46x_i2c_controller = { + .name = "IOP3xx-I2C", + .id = 0, + .num_resources = 2, + .resource = ixp46x_i2c_resources +}; + +static struct platform_device *ixp46x_devices[] __initdata = { + &ixp46x_i2c_controller +}; + +unsigned long ixp4xx_exp_bus_size; +EXPORT_SYMBOL(ixp4xx_exp_bus_size); + +static int ixp4xx_gpio_direction_input(struct gpio_chip *chip, unsigned gpio) +{ + gpio_line_config(gpio, IXP4XX_GPIO_IN); + + return 0; +} + +static int ixp4xx_gpio_direction_output(struct gpio_chip *chip, unsigned gpio, + int level) +{ + gpio_line_set(gpio, level); + gpio_line_config(gpio, IXP4XX_GPIO_OUT); + + return 0; +} + +static int ixp4xx_gpio_get_value(struct gpio_chip *chip, unsigned gpio) +{ + int value; + + gpio_line_get(gpio, &value); + + return value; +} + +static void ixp4xx_gpio_set_value(struct gpio_chip *chip, unsigned gpio, + int value) +{ + gpio_line_set(gpio, value); +} + +static struct gpio_chip ixp4xx_gpio_chip = { + .label = "IXP4XX_GPIO_CHIP", + .direction_input = ixp4xx_gpio_direction_input, + .direction_output = ixp4xx_gpio_direction_output, + .get = ixp4xx_gpio_get_value, + .set = ixp4xx_gpio_set_value, + .to_irq = ixp4xx_gpio_to_irq, + .base = 0, + .ngpio = 16, +}; + +void __init ixp4xx_sys_init(void) +{ + ixp4xx_exp_bus_size = SZ_16M; + + platform_add_devices(ixp4xx_devices, ARRAY_SIZE(ixp4xx_devices)); + + gpiochip_add(&ixp4xx_gpio_chip); + + if (cpu_is_ixp46x()) { + int region; + + platform_add_devices(ixp46x_devices, + ARRAY_SIZE(ixp46x_devices)); + + for (region = 0; region < 7; region++) { + if((*(IXP4XX_EXP_REG(0x4 * region)) & 0x200)) { + ixp4xx_exp_bus_size = SZ_32M; + break; + } + } + } + + printk("IXP4xx: Using %luMiB expansion bus window size\n", + ixp4xx_exp_bus_size >> 20); +} + +/* + * sched_clock() + */ +static u64 notrace ixp4xx_read_sched_clock(void) +{ + return *IXP4XX_OSTS; +} + +/* + * clocksource + */ + +static cycle_t ixp4xx_clocksource_read(struct clocksource *c) +{ + return *IXP4XX_OSTS; +} + +unsigned long ixp4xx_timer_freq = IXP4XX_TIMER_FREQ; +EXPORT_SYMBOL(ixp4xx_timer_freq); +static void __init ixp4xx_clocksource_init(void) +{ + sched_clock_register(ixp4xx_read_sched_clock, 32, ixp4xx_timer_freq); + + clocksource_mmio_init(NULL, "OSTS", ixp4xx_timer_freq, 200, 32, + ixp4xx_clocksource_read); +} + +/* + * clockevents + */ +static int ixp4xx_set_next_event(unsigned long evt, + struct clock_event_device *unused) +{ + unsigned long opts = *IXP4XX_OSRT1 & IXP4XX_OST_RELOAD_MASK; + + *IXP4XX_OSRT1 = (evt & ~IXP4XX_OST_RELOAD_MASK) | opts; + + return 0; +} + +static void ixp4xx_set_mode(enum clock_event_mode mode, + struct clock_event_device *evt) +{ + unsigned long opts = *IXP4XX_OSRT1 & IXP4XX_OST_RELOAD_MASK; + unsigned long osrt = *IXP4XX_OSRT1 & ~IXP4XX_OST_RELOAD_MASK; + + switch (mode) { + case CLOCK_EVT_MODE_PERIODIC: + osrt = IXP4XX_LATCH & ~IXP4XX_OST_RELOAD_MASK; + opts = IXP4XX_OST_ENABLE; + break; + case CLOCK_EVT_MODE_ONESHOT: + /* period set by 'set next_event' */ + osrt = 0; + opts = IXP4XX_OST_ENABLE | IXP4XX_OST_ONE_SHOT; + break; + case CLOCK_EVT_MODE_SHUTDOWN: + opts &= ~IXP4XX_OST_ENABLE; + break; + case CLOCK_EVT_MODE_RESUME: + opts |= IXP4XX_OST_ENABLE; + break; + case CLOCK_EVT_MODE_UNUSED: + default: + osrt = opts = 0; + break; + } + + *IXP4XX_OSRT1 = osrt | opts; +} + +static struct clock_event_device clockevent_ixp4xx = { + .name = "ixp4xx timer1", + .features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT, + .rating = 200, + .set_mode = ixp4xx_set_mode, + .set_next_event = ixp4xx_set_next_event, +}; + +static void __init ixp4xx_clockevent_init(void) +{ + clockevent_ixp4xx.cpumask = cpumask_of(0); + clockevents_config_and_register(&clockevent_ixp4xx, IXP4XX_TIMER_FREQ, + 0xf, 0xfffffffe); +} + +void ixp4xx_restart(enum reboot_mode mode, const char *cmd) +{ + if (mode == REBOOT_SOFT) { + /* Jump into ROM at address 0 */ + soft_restart(0); + } else { + /* Use on-chip reset capability */ + + /* set the "key" register to enable access to + * "timer" and "enable" registers + */ + *IXP4XX_OSWK = IXP4XX_WDT_KEY; + + /* write 0 to the timer register for an immediate reset */ + *IXP4XX_OSWT = 0; + + *IXP4XX_OSWE = IXP4XX_WDT_RESET_ENABLE | IXP4XX_WDT_COUNT_ENABLE; + } +} + +#ifdef CONFIG_PCI +static int ixp4xx_needs_bounce(struct device *dev, dma_addr_t dma_addr, size_t size) +{ + return (dma_addr + size) > SZ_64M; +} + +static int ixp4xx_platform_notify_remove(struct device *dev) +{ + if (dev_is_pci(dev)) + dmabounce_unregister_dev(dev); + + return 0; +} +#endif + +/* + * Setup DMA mask to 64MB on PCI devices and 4 GB on all other things. + */ +static int ixp4xx_platform_notify(struct device *dev) +{ + dev->dma_mask = &dev->coherent_dma_mask; + +#ifdef CONFIG_PCI + if (dev_is_pci(dev)) { + dev->coherent_dma_mask = DMA_BIT_MASK(28); /* 64 MB */ + dmabounce_register_dev(dev, 2048, 4096, ixp4xx_needs_bounce); + return 0; + } +#endif + + dev->coherent_dma_mask = DMA_BIT_MASK(32); + return 0; +} + +int dma_set_coherent_mask(struct device *dev, u64 mask) +{ + if (dev_is_pci(dev)) + mask &= DMA_BIT_MASK(28); /* 64 MB */ + + if ((mask & DMA_BIT_MASK(28)) == DMA_BIT_MASK(28)) { + dev->coherent_dma_mask = mask; + return 0; + } + + return -EIO; /* device wanted sub-64MB mask */ +} +EXPORT_SYMBOL(dma_set_coherent_mask); + +#ifdef CONFIG_IXP4XX_INDIRECT_PCI +/* + * In the case of using indirect PCI, we simply return the actual PCI + * address and our read/write implementation use that to drive the + * access registers. If something outside of PCI is ioremap'd, we + * fallback to the default. + */ + +static void __iomem *ixp4xx_ioremap_caller(phys_addr_t addr, size_t size, + unsigned int mtype, void *caller) +{ + if (!is_pci_memory(addr)) + return __arm_ioremap_caller(addr, size, mtype, caller); + + return (void __iomem *)addr; +} + +static void ixp4xx_iounmap(volatile void __iomem *addr) +{ + if (!is_pci_memory((__force u32)addr)) + __iounmap(addr); +} +#endif + +void __init ixp4xx_init_early(void) +{ + platform_notify = ixp4xx_platform_notify; +#ifdef CONFIG_PCI + platform_notify_remove = ixp4xx_platform_notify_remove; +#endif +#ifdef CONFIG_IXP4XX_INDIRECT_PCI + arch_ioremap_caller = ixp4xx_ioremap_caller; + arch_iounmap = ixp4xx_iounmap; +#endif +} diff --git a/kernel/arch/arm/mach-ixp4xx/coyote-pci.c b/kernel/arch/arm/mach-ixp4xx/coyote-pci.c new file mode 100644 index 000000000..5d14ce2ae --- /dev/null +++ b/kernel/arch/arm/mach-ixp4xx/coyote-pci.c @@ -0,0 +1,64 @@ +/* + * arch/arm/mach-ixp4xx/coyote-pci.c + * + * PCI setup routines for ADI Engineering Coyote platform + * + * Copyright (C) 2002 Jungo Software Technologies. + * Copyright (C) 2003 MontaVista Softwrae, Inc. + * + * Maintainer: Deepak Saxena <dsaxena@mvista.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + */ + +#include <linux/kernel.h> +#include <linux/pci.h> +#include <linux/init.h> +#include <linux/irq.h> +#include <asm/mach-types.h> +#include <mach/hardware.h> +#include <asm/irq.h> +#include <asm/mach/pci.h> + +#define SLOT0_DEVID 14 +#define SLOT1_DEVID 15 + +/* PCI controller GPIO to IRQ pin mappings */ +#define SLOT0_INTA 6 +#define SLOT1_INTA 11 + +void __init coyote_pci_preinit(void) +{ + irq_set_irq_type(IXP4XX_GPIO_IRQ(SLOT0_INTA), IRQ_TYPE_LEVEL_LOW); + irq_set_irq_type(IXP4XX_GPIO_IRQ(SLOT1_INTA), IRQ_TYPE_LEVEL_LOW); + ixp4xx_pci_preinit(); +} + +static int __init coyote_map_irq(const struct pci_dev *dev, u8 slot, u8 pin) +{ + if (slot == SLOT0_DEVID) + return IXP4XX_GPIO_IRQ(SLOT0_INTA); + else if (slot == SLOT1_DEVID) + return IXP4XX_GPIO_IRQ(SLOT1_INTA); + else return -1; +} + +struct hw_pci coyote_pci __initdata = { + .nr_controllers = 1, + .ops = &ixp4xx_ops, + .preinit = coyote_pci_preinit, + .setup = ixp4xx_setup, + .map_irq = coyote_map_irq, +}; + +int __init coyote_pci_init(void) +{ + if (machine_is_adi_coyote()) + pci_common_init(&coyote_pci); + return 0; +} + +subsys_initcall(coyote_pci_init); diff --git a/kernel/arch/arm/mach-ixp4xx/coyote-setup.c b/kernel/arch/arm/mach-ixp4xx/coyote-setup.c new file mode 100644 index 000000000..820cae860 --- /dev/null +++ b/kernel/arch/arm/mach-ixp4xx/coyote-setup.c @@ -0,0 +1,141 @@ +/* + * arch/arm/mach-ixp4xx/coyote-setup.c + * + * Board setup for ADI Engineering and IXDGP425 boards + * + * Copyright (C) 2003-2005 MontaVista Software, Inc. + * + * Author: Deepak Saxena <dsaxena@plexity.net> + */ + +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/device.h> +#include <linux/serial.h> +#include <linux/tty.h> +#include <linux/serial_8250.h> + +#include <asm/types.h> +#include <asm/setup.h> +#include <asm/memory.h> +#include <mach/hardware.h> +#include <asm/irq.h> +#include <asm/mach-types.h> +#include <asm/mach/arch.h> +#include <asm/mach/flash.h> + +#define COYOTE_IDE_BASE_PHYS IXP4XX_EXP_BUS_BASE(3) +#define COYOTE_IDE_BASE_VIRT 0xFFFE1000 +#define COYOTE_IDE_REGION_SIZE 0x1000 + +#define COYOTE_IDE_DATA_PORT 0xFFFE10E0 +#define COYOTE_IDE_CTRL_PORT 0xFFFE10FC +#define COYOTE_IDE_ERROR_PORT 0xFFFE10E2 +#define IRQ_COYOTE_IDE IRQ_IXP4XX_GPIO5 + +static struct flash_platform_data coyote_flash_data = { + .map_name = "cfi_probe", + .width = 2, +}; + +static struct resource coyote_flash_resource = { + .flags = IORESOURCE_MEM, +}; + +static struct platform_device coyote_flash = { + .name = "IXP4XX-Flash", + .id = 0, + .dev = { + .platform_data = &coyote_flash_data, + }, + .num_resources = 1, + .resource = &coyote_flash_resource, +}; + +static struct resource coyote_uart_resource = { + .start = IXP4XX_UART2_BASE_PHYS, + .end = IXP4XX_UART2_BASE_PHYS + 0x0fff, + .flags = IORESOURCE_MEM, +}; + +static struct plat_serial8250_port coyote_uart_data[] = { + { + .mapbase = IXP4XX_UART2_BASE_PHYS, + .membase = (char *)IXP4XX_UART2_BASE_VIRT + REG_OFFSET, + .irq = IRQ_IXP4XX_UART2, + .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST, + .iotype = UPIO_MEM, + .regshift = 2, + .uartclk = IXP4XX_UART_XTAL, + }, + { }, +}; + +static struct platform_device coyote_uart = { + .name = "serial8250", + .id = PLAT8250_DEV_PLATFORM, + .dev = { + .platform_data = coyote_uart_data, + }, + .num_resources = 1, + .resource = &coyote_uart_resource, +}; + +static struct platform_device *coyote_devices[] __initdata = { + &coyote_flash, + &coyote_uart +}; + +static void __init coyote_init(void) +{ + ixp4xx_sys_init(); + + coyote_flash_resource.start = IXP4XX_EXP_BUS_BASE(0); + coyote_flash_resource.end = IXP4XX_EXP_BUS_BASE(0) + SZ_32M - 1; + + *IXP4XX_EXP_CS0 |= IXP4XX_FLASH_WRITABLE; + *IXP4XX_EXP_CS1 = *IXP4XX_EXP_CS0; + + if (machine_is_ixdpg425()) { + coyote_uart_data[0].membase = + (char*)(IXP4XX_UART1_BASE_VIRT + REG_OFFSET); + coyote_uart_data[0].mapbase = IXP4XX_UART1_BASE_PHYS; + coyote_uart_data[0].irq = IRQ_IXP4XX_UART1; + } + + platform_add_devices(coyote_devices, ARRAY_SIZE(coyote_devices)); +} + +#ifdef CONFIG_ARCH_ADI_COYOTE +MACHINE_START(ADI_COYOTE, "ADI Engineering Coyote") + /* Maintainer: MontaVista Software, Inc. */ + .map_io = ixp4xx_map_io, + .init_early = ixp4xx_init_early, + .init_irq = ixp4xx_init_irq, + .init_time = ixp4xx_timer_init, + .atag_offset = 0x100, + .init_machine = coyote_init, +#if defined(CONFIG_PCI) + .dma_zone_size = SZ_64M, +#endif + .restart = ixp4xx_restart, +MACHINE_END +#endif + +/* + * IXDPG425 is identical to Coyote except for which serial port + * is connected. + */ +#ifdef CONFIG_MACH_IXDPG425 +MACHINE_START(IXDPG425, "Intel IXDPG425") + /* Maintainer: MontaVista Software, Inc. */ + .map_io = ixp4xx_map_io, + .init_early = ixp4xx_init_early, + .init_irq = ixp4xx_init_irq, + .init_time = ixp4xx_timer_init, + .atag_offset = 0x100, + .init_machine = coyote_init, + .restart = ixp4xx_restart, +MACHINE_END +#endif + diff --git a/kernel/arch/arm/mach-ixp4xx/dsmg600-pci.c b/kernel/arch/arm/mach-ixp4xx/dsmg600-pci.c new file mode 100644 index 000000000..8dca76937 --- /dev/null +++ b/kernel/arch/arm/mach-ixp4xx/dsmg600-pci.c @@ -0,0 +1,79 @@ +/* + * DSM-G600 board-level PCI initialization + * + * Copyright (C) 2006 Tower Technologies + * Author: Alessandro Zummo <a.zummo@towertech.it> + * + * based on ixdp425-pci.c: + * Copyright (C) 2002 Intel Corporation. + * Copyright (C) 2003-2004 MontaVista Software, Inc. + * + * Maintainer: http://www.nslu2-linux.org/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + */ + +#include <linux/pci.h> +#include <linux/init.h> +#include <linux/irq.h> +#include <asm/mach/pci.h> +#include <asm/mach-types.h> + +#define MAX_DEV 4 +#define IRQ_LINES 3 + +/* PCI controller GPIO to IRQ pin mappings */ +#define INTA 11 +#define INTB 10 +#define INTC 9 +#define INTD 8 +#define INTE 7 +#define INTF 6 + +void __init dsmg600_pci_preinit(void) +{ + irq_set_irq_type(IXP4XX_GPIO_IRQ(INTA), IRQ_TYPE_LEVEL_LOW); + irq_set_irq_type(IXP4XX_GPIO_IRQ(INTB), IRQ_TYPE_LEVEL_LOW); + irq_set_irq_type(IXP4XX_GPIO_IRQ(INTC), IRQ_TYPE_LEVEL_LOW); + irq_set_irq_type(IXP4XX_GPIO_IRQ(INTD), IRQ_TYPE_LEVEL_LOW); + irq_set_irq_type(IXP4XX_GPIO_IRQ(INTE), IRQ_TYPE_LEVEL_LOW); + irq_set_irq_type(IXP4XX_GPIO_IRQ(INTF), IRQ_TYPE_LEVEL_LOW); + ixp4xx_pci_preinit(); +} + +static int __init dsmg600_map_irq(const struct pci_dev *dev, u8 slot, u8 pin) +{ + static int pci_irq_table[MAX_DEV][IRQ_LINES] = { + { IXP4XX_GPIO_IRQ(INTE), -1, -1 }, + { IXP4XX_GPIO_IRQ(INTA), -1, -1 }, + { IXP4XX_GPIO_IRQ(INTB), IXP4XX_GPIO_IRQ(INTC), + IXP4XX_GPIO_IRQ(INTD) }, + { IXP4XX_GPIO_IRQ(INTF), -1, -1 }, + }; + + if (slot >= 1 && slot <= MAX_DEV && pin >= 1 && pin <= IRQ_LINES) + return pci_irq_table[slot - 1][pin - 1]; + + return -1; +} + +struct hw_pci __initdata dsmg600_pci = { + .nr_controllers = 1, + .ops = &ixp4xx_ops, + .preinit = dsmg600_pci_preinit, + .setup = ixp4xx_setup, + .map_irq = dsmg600_map_irq, +}; + +int __init dsmg600_pci_init(void) +{ + if (machine_is_dsmg600()) + pci_common_init(&dsmg600_pci); + + return 0; +} + +subsys_initcall(dsmg600_pci_init); diff --git a/kernel/arch/arm/mach-ixp4xx/dsmg600-setup.c b/kernel/arch/arm/mach-ixp4xx/dsmg600-setup.c new file mode 100644 index 000000000..43ee06d3a --- /dev/null +++ b/kernel/arch/arm/mach-ixp4xx/dsmg600-setup.c @@ -0,0 +1,299 @@ +/* + * DSM-G600 board-setup + * + * Copyright (C) 2008 Rod Whitby <rod@whitby.id.au> + * Copyright (C) 2006 Tower Technologies + * + * based on ixdp425-setup.c: + * Copyright (C) 2003-2004 MontaVista Software, Inc. + * based on nslu2-power.c: + * Copyright (C) 2005 Tower Technologies + * based on nslu2-io.c: + * Copyright (C) 2004 Karen Spearel + * + * Author: Alessandro Zummo <a.zummo@towertech.it> + * Author: Michael Westerhof <mwester@dls.net> + * Author: Rod Whitby <rod@whitby.id.au> + * Maintainers: http://www.nslu2-linux.org/ + */ +#include <linux/gpio.h> +#include <linux/irq.h> +#include <linux/jiffies.h> +#include <linux/timer.h> +#include <linux/serial.h> +#include <linux/serial_8250.h> +#include <linux/leds.h> +#include <linux/reboot.h> +#include <linux/i2c.h> +#include <linux/i2c-gpio.h> +#include <linux/gpio.h> + +#include <mach/hardware.h> + +#include <asm/mach-types.h> +#include <asm/mach/arch.h> +#include <asm/mach/flash.h> +#include <asm/mach/time.h> + +#define DSMG600_SDA_PIN 5 +#define DSMG600_SCL_PIN 4 + +/* DSM-G600 Timer Setting */ +#define DSMG600_FREQ 66000000 + +/* Buttons */ +#define DSMG600_PB_GPIO 15 /* power button */ +#define DSMG600_RB_GPIO 3 /* reset button */ + +/* Power control */ +#define DSMG600_PO_GPIO 2 /* power off */ + +/* LEDs */ +#define DSMG600_LED_PWR_GPIO 0 +#define DSMG600_LED_WLAN_GPIO 14 + +static struct flash_platform_data dsmg600_flash_data = { + .map_name = "cfi_probe", + .width = 2, +}; + +static struct resource dsmg600_flash_resource = { + .flags = IORESOURCE_MEM, +}; + +static struct platform_device dsmg600_flash = { + .name = "IXP4XX-Flash", + .id = 0, + .dev.platform_data = &dsmg600_flash_data, + .num_resources = 1, + .resource = &dsmg600_flash_resource, +}; + +static struct i2c_gpio_platform_data dsmg600_i2c_gpio_data = { + .sda_pin = DSMG600_SDA_PIN, + .scl_pin = DSMG600_SCL_PIN, +}; + +static struct platform_device dsmg600_i2c_gpio = { + .name = "i2c-gpio", + .id = 0, + .dev = { + .platform_data = &dsmg600_i2c_gpio_data, + }, +}; + +static struct i2c_board_info __initdata dsmg600_i2c_board_info [] = { + { + I2C_BOARD_INFO("pcf8563", 0x51), + }, +}; + +static struct gpio_led dsmg600_led_pins[] = { + { + .name = "dsmg600:green:power", + .gpio = DSMG600_LED_PWR_GPIO, + }, + { + .name = "dsmg600:green:wlan", + .gpio = DSMG600_LED_WLAN_GPIO, + .active_low = true, + }, +}; + +static struct gpio_led_platform_data dsmg600_led_data = { + .num_leds = ARRAY_SIZE(dsmg600_led_pins), + .leds = dsmg600_led_pins, +}; + +static struct platform_device dsmg600_leds = { + .name = "leds-gpio", + .id = -1, + .dev.platform_data = &dsmg600_led_data, +}; + +static struct resource dsmg600_uart_resources[] = { + { + .start = IXP4XX_UART1_BASE_PHYS, + .end = IXP4XX_UART1_BASE_PHYS + 0x0fff, + .flags = IORESOURCE_MEM, + }, + { + .start = IXP4XX_UART2_BASE_PHYS, + .end = IXP4XX_UART2_BASE_PHYS + 0x0fff, + .flags = IORESOURCE_MEM, + } +}; + +static struct plat_serial8250_port dsmg600_uart_data[] = { + { + .mapbase = IXP4XX_UART1_BASE_PHYS, + .membase = (char *)IXP4XX_UART1_BASE_VIRT + REG_OFFSET, + .irq = IRQ_IXP4XX_UART1, + .flags = UPF_BOOT_AUTOCONF, + .iotype = UPIO_MEM, + .regshift = 2, + .uartclk = IXP4XX_UART_XTAL, + }, + { + .mapbase = IXP4XX_UART2_BASE_PHYS, + .membase = (char *)IXP4XX_UART2_BASE_VIRT + REG_OFFSET, + .irq = IRQ_IXP4XX_UART2, + .flags = UPF_BOOT_AUTOCONF, + .iotype = UPIO_MEM, + .regshift = 2, + .uartclk = IXP4XX_UART_XTAL, + }, + { } +}; + +static struct platform_device dsmg600_uart = { + .name = "serial8250", + .id = PLAT8250_DEV_PLATFORM, + .dev.platform_data = dsmg600_uart_data, + .num_resources = ARRAY_SIZE(dsmg600_uart_resources), + .resource = dsmg600_uart_resources, +}; + +static struct platform_device *dsmg600_devices[] __initdata = { + &dsmg600_i2c_gpio, + &dsmg600_flash, + &dsmg600_leds, +}; + +static void dsmg600_power_off(void) +{ + /* enable the pwr cntl and drive it high */ + gpio_direction_output(DSMG600_PO_GPIO, 1); +} + +/* This is used to make sure the power-button pusher is serious. The button + * must be held until the value of this counter reaches zero. + */ +static int power_button_countdown; + +/* Must hold the button down for at least this many counts to be processed */ +#define PBUTTON_HOLDDOWN_COUNT 4 /* 2 secs */ + +static void dsmg600_power_handler(unsigned long data); +static DEFINE_TIMER(dsmg600_power_timer, dsmg600_power_handler, 0, 0); + +static void dsmg600_power_handler(unsigned long data) +{ + /* This routine is called twice per second to check the + * state of the power button. + */ + + if (gpio_get_value(DSMG600_PB_GPIO)) { + + /* IO Pin is 1 (button pushed) */ + if (power_button_countdown > 0) + power_button_countdown--; + + } else { + + /* Done on button release, to allow for auto-power-on mods. */ + if (power_button_countdown == 0) { + /* Signal init to do the ctrlaltdel action, + * this will bypass init if it hasn't started + * and do a kernel_restart. + */ + ctrl_alt_del(); + + /* Change the state of the power LED to "blink" */ + gpio_set_value(DSMG600_LED_PWR_GPIO, 0); + } else { + power_button_countdown = PBUTTON_HOLDDOWN_COUNT; + } + } + + mod_timer(&dsmg600_power_timer, jiffies + msecs_to_jiffies(500)); +} + +static irqreturn_t dsmg600_reset_handler(int irq, void *dev_id) +{ + /* This is the paper-clip reset, it shuts the machine down directly. */ + machine_power_off(); + + return IRQ_HANDLED; +} + +static void __init dsmg600_timer_init(void) +{ + /* The xtal on this machine is non-standard. */ + ixp4xx_timer_freq = DSMG600_FREQ; + + /* Call standard timer_init function. */ + ixp4xx_timer_init(); +} + +static int __init dsmg600_gpio_init(void) +{ + if (!machine_is_dsmg600()) + return 0; + + gpio_request(DSMG600_RB_GPIO, "reset button"); + if (request_irq(gpio_to_irq(DSMG600_RB_GPIO), &dsmg600_reset_handler, + IRQF_TRIGGER_LOW, "DSM-G600 reset button", NULL) < 0) { + + printk(KERN_DEBUG "Reset Button IRQ %d not available\n", + gpio_to_irq(DSMG600_RB_GPIO)); + } + + /* + * The power button on the D-Link DSM-G600 is on GPIO 15, but + * it cannot handle interrupts on that GPIO line. So we'll + * have to poll it with a kernel timer. + */ + + /* Make sure that the power button GPIO is set up as an input */ + gpio_request(DSMG600_PB_GPIO, "power button"); + gpio_direction_input(DSMG600_PB_GPIO); + /* Request poweroff GPIO line */ + gpio_request(DSMG600_PO_GPIO, "power off button"); + + /* Set the initial value for the power button IRQ handler */ + power_button_countdown = PBUTTON_HOLDDOWN_COUNT; + + mod_timer(&dsmg600_power_timer, jiffies + msecs_to_jiffies(500)); + return 0; +} +device_initcall(dsmg600_gpio_init); + +static void __init dsmg600_init(void) +{ + ixp4xx_sys_init(); + + /* Make sure that GPIO14 and GPIO15 are not used as clocks */ + *IXP4XX_GPIO_GPCLKR = 0; + + dsmg600_flash_resource.start = IXP4XX_EXP_BUS_BASE(0); + dsmg600_flash_resource.end = + IXP4XX_EXP_BUS_BASE(0) + ixp4xx_exp_bus_size - 1; + + i2c_register_board_info(0, dsmg600_i2c_board_info, + ARRAY_SIZE(dsmg600_i2c_board_info)); + + /* The UART is required on the DSM-G600 (Redboot cannot use the + * NIC) -- do it here so that it does *not* get removed if + * platform_add_devices fails! + */ + (void)platform_device_register(&dsmg600_uart); + + platform_add_devices(dsmg600_devices, ARRAY_SIZE(dsmg600_devices)); + + pm_power_off = dsmg600_power_off; +} + +MACHINE_START(DSMG600, "D-Link DSM-G600 RevA") + /* Maintainer: www.nslu2-linux.org */ + .atag_offset = 0x100, + .map_io = ixp4xx_map_io, + .init_early = ixp4xx_init_early, + .init_irq = ixp4xx_init_irq, + .init_time = dsmg600_timer_init, + .init_machine = dsmg600_init, +#if defined(CONFIG_PCI) + .dma_zone_size = SZ_64M, +#endif + .restart = ixp4xx_restart, +MACHINE_END diff --git a/kernel/arch/arm/mach-ixp4xx/fsg-pci.c b/kernel/arch/arm/mach-ixp4xx/fsg-pci.c new file mode 100644 index 000000000..fd4a8625b --- /dev/null +++ b/kernel/arch/arm/mach-ixp4xx/fsg-pci.c @@ -0,0 +1,75 @@ +/* + * arch/arch/mach-ixp4xx/fsg-pci.c + * + * FSG board-level PCI initialization + * + * Author: Rod Whitby <rod@whitby.id.au> + * Maintainer: http://www.nslu2-linux.org/ + * + * based on ixdp425-pci.c: + * Copyright (C) 2002 Intel Corporation. + * Copyright (C) 2003-2004 MontaVista Software, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + */ + +#include <linux/pci.h> +#include <linux/init.h> +#include <linux/irq.h> +#include <asm/mach/pci.h> +#include <asm/mach-types.h> + +#define MAX_DEV 3 +#define IRQ_LINES 3 + +/* PCI controller GPIO to IRQ pin mappings */ +#define INTA 6 +#define INTB 7 +#define INTC 5 + +void __init fsg_pci_preinit(void) +{ + irq_set_irq_type(IXP4XX_GPIO_IRQ(INTA), IRQ_TYPE_LEVEL_LOW); + irq_set_irq_type(IXP4XX_GPIO_IRQ(INTB), IRQ_TYPE_LEVEL_LOW); + irq_set_irq_type(IXP4XX_GPIO_IRQ(INTC), IRQ_TYPE_LEVEL_LOW); + ixp4xx_pci_preinit(); +} + +static int __init fsg_map_irq(const struct pci_dev *dev, u8 slot, u8 pin) +{ + static int pci_irq_table[IRQ_LINES] = { + IXP4XX_GPIO_IRQ(INTC), + IXP4XX_GPIO_IRQ(INTB), + IXP4XX_GPIO_IRQ(INTA), + }; + + int irq = -1; + slot -= 11; + + if (slot >= 1 && slot <= MAX_DEV && pin >= 1 && pin <= IRQ_LINES) + irq = pci_irq_table[slot - 1]; + printk(KERN_INFO "%s: Mapped slot %d pin %d to IRQ %d\n", + __func__, slot, pin, irq); + + return irq; +} + +struct hw_pci fsg_pci __initdata = { + .nr_controllers = 1, + .ops = &ixp4xx_ops, + .preinit = fsg_pci_preinit, + .setup = ixp4xx_setup, + .map_irq = fsg_map_irq, +}; + +int __init fsg_pci_init(void) +{ + if (machine_is_fsg()) + pci_common_init(&fsg_pci); + return 0; +} + +subsys_initcall(fsg_pci_init); diff --git a/kernel/arch/arm/mach-ixp4xx/fsg-setup.c b/kernel/arch/arm/mach-ixp4xx/fsg-setup.c new file mode 100644 index 000000000..5c4b0c4a1 --- /dev/null +++ b/kernel/arch/arm/mach-ixp4xx/fsg-setup.c @@ -0,0 +1,281 @@ +/* + * arch/arm/mach-ixp4xx/fsg-setup.c + * + * FSG board-setup + * + * Copyright (C) 2008 Rod Whitby <rod@whitby.id.au> + * + * based on ixdp425-setup.c: + * Copyright (C) 2003-2004 MontaVista Software, Inc. + * based on nslu2-power.c + * Copyright (C) 2005 Tower Technologies + * + * Author: Rod Whitby <rod@whitby.id.au> + * Maintainers: http://www.nslu2-linux.org/ + * + */ +#include <linux/gpio.h> +#include <linux/if_ether.h> +#include <linux/irq.h> +#include <linux/serial.h> +#include <linux/serial_8250.h> +#include <linux/leds.h> +#include <linux/reboot.h> +#include <linux/i2c.h> +#include <linux/i2c-gpio.h> +#include <linux/io.h> +#include <asm/mach-types.h> +#include <asm/mach/arch.h> +#include <asm/mach/flash.h> + +#define FSG_SDA_PIN 12 +#define FSG_SCL_PIN 13 + +#define FSG_SB_GPIO 4 /* sync button */ +#define FSG_RB_GPIO 9 /* reset button */ +#define FSG_UB_GPIO 10 /* usb button */ + +static struct flash_platform_data fsg_flash_data = { + .map_name = "cfi_probe", + .width = 2, +}; + +static struct resource fsg_flash_resource = { + .flags = IORESOURCE_MEM, +}; + +static struct platform_device fsg_flash = { + .name = "IXP4XX-Flash", + .id = 0, + .dev = { + .platform_data = &fsg_flash_data, + }, + .num_resources = 1, + .resource = &fsg_flash_resource, +}; + +static struct i2c_gpio_platform_data fsg_i2c_gpio_data = { + .sda_pin = FSG_SDA_PIN, + .scl_pin = FSG_SCL_PIN, +}; + +static struct platform_device fsg_i2c_gpio = { + .name = "i2c-gpio", + .id = 0, + .dev = { + .platform_data = &fsg_i2c_gpio_data, + }, +}; + +static struct i2c_board_info __initdata fsg_i2c_board_info [] = { + { + I2C_BOARD_INFO("isl1208", 0x6f), + }, +}; + +static struct resource fsg_uart_resources[] = { + { + .start = IXP4XX_UART1_BASE_PHYS, + .end = IXP4XX_UART1_BASE_PHYS + 0x0fff, + .flags = IORESOURCE_MEM, + }, + { + .start = IXP4XX_UART2_BASE_PHYS, + .end = IXP4XX_UART2_BASE_PHYS + 0x0fff, + .flags = IORESOURCE_MEM, + } +}; + +static struct plat_serial8250_port fsg_uart_data[] = { + { + .mapbase = IXP4XX_UART1_BASE_PHYS, + .membase = (char *)IXP4XX_UART1_BASE_VIRT + REG_OFFSET, + .irq = IRQ_IXP4XX_UART1, + .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST, + .iotype = UPIO_MEM, + .regshift = 2, + .uartclk = IXP4XX_UART_XTAL, + }, + { + .mapbase = IXP4XX_UART2_BASE_PHYS, + .membase = (char *)IXP4XX_UART2_BASE_VIRT + REG_OFFSET, + .irq = IRQ_IXP4XX_UART2, + .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST, + .iotype = UPIO_MEM, + .regshift = 2, + .uartclk = IXP4XX_UART_XTAL, + }, + { } +}; + +static struct platform_device fsg_uart = { + .name = "serial8250", + .id = PLAT8250_DEV_PLATFORM, + .dev = { + .platform_data = fsg_uart_data, + }, + .num_resources = ARRAY_SIZE(fsg_uart_resources), + .resource = fsg_uart_resources, +}; + +static struct platform_device fsg_leds = { + .name = "fsg-led", + .id = -1, +}; + +/* Built-in 10/100 Ethernet MAC interfaces */ +static struct eth_plat_info fsg_plat_eth[] = { + { + .phy = 5, + .rxq = 3, + .txreadyq = 20, + }, { + .phy = 4, + .rxq = 4, + .txreadyq = 21, + } +}; + +static struct platform_device fsg_eth[] = { + { + .name = "ixp4xx_eth", + .id = IXP4XX_ETH_NPEB, + .dev = { + .platform_data = fsg_plat_eth, + }, + }, { + .name = "ixp4xx_eth", + .id = IXP4XX_ETH_NPEC, + .dev = { + .platform_data = fsg_plat_eth + 1, + }, + } +}; + +static struct platform_device *fsg_devices[] __initdata = { + &fsg_i2c_gpio, + &fsg_flash, + &fsg_leds, + &fsg_eth[0], + &fsg_eth[1], +}; + +static irqreturn_t fsg_power_handler(int irq, void *dev_id) +{ + /* Signal init to do the ctrlaltdel action, this will bypass init if + * it hasn't started and do a kernel_restart. + */ + ctrl_alt_del(); + + return IRQ_HANDLED; +} + +static irqreturn_t fsg_reset_handler(int irq, void *dev_id) +{ + /* This is the paper-clip reset which does an emergency reboot. */ + printk(KERN_INFO "Restarting system.\n"); + machine_restart(NULL); + + /* This should never be reached. */ + return IRQ_HANDLED; +} + +static void __init fsg_init(void) +{ + uint8_t __iomem *f; + + ixp4xx_sys_init(); + + fsg_flash_resource.start = IXP4XX_EXP_BUS_BASE(0); + fsg_flash_resource.end = + IXP4XX_EXP_BUS_BASE(0) + ixp4xx_exp_bus_size - 1; + + *IXP4XX_EXP_CS0 |= IXP4XX_FLASH_WRITABLE; + *IXP4XX_EXP_CS1 = *IXP4XX_EXP_CS0; + + /* Configure CS2 for operation, 8bit and writable */ + *IXP4XX_EXP_CS2 = 0xbfff0002; + + i2c_register_board_info(0, fsg_i2c_board_info, + ARRAY_SIZE(fsg_i2c_board_info)); + + /* This is only useful on a modified machine, but it is valuable + * to have it first in order to see debug messages, and so that + * it does *not* get removed if platform_add_devices fails! + */ + (void)platform_device_register(&fsg_uart); + + platform_add_devices(fsg_devices, ARRAY_SIZE(fsg_devices)); + + if (request_irq(gpio_to_irq(FSG_RB_GPIO), &fsg_reset_handler, + IRQF_TRIGGER_LOW, "FSG reset button", NULL) < 0) { + + printk(KERN_DEBUG "Reset Button IRQ %d not available\n", + gpio_to_irq(FSG_RB_GPIO)); + } + + if (request_irq(gpio_to_irq(FSG_SB_GPIO), &fsg_power_handler, + IRQF_TRIGGER_LOW, "FSG power button", NULL) < 0) { + + printk(KERN_DEBUG "Power Button IRQ %d not available\n", + gpio_to_irq(FSG_SB_GPIO)); + } + + /* + * Map in a portion of the flash and read the MAC addresses. + * Since it is stored in BE in the flash itself, we need to + * byteswap it if we're in LE mode. + */ + f = ioremap(IXP4XX_EXP_BUS_BASE(0), 0x400000); + if (f) { +#ifdef __ARMEB__ + int i; + for (i = 0; i < 6; i++) { + fsg_plat_eth[0].hwaddr[i] = readb(f + 0x3C0422 + i); + fsg_plat_eth[1].hwaddr[i] = readb(f + 0x3C043B + i); + } +#else + + /* + Endian-swapped reads from unaligned addresses are + required to extract the two MACs from the big-endian + Redboot config area in flash. + */ + + fsg_plat_eth[0].hwaddr[0] = readb(f + 0x3C0421); + fsg_plat_eth[0].hwaddr[1] = readb(f + 0x3C0420); + fsg_plat_eth[0].hwaddr[2] = readb(f + 0x3C0427); + fsg_plat_eth[0].hwaddr[3] = readb(f + 0x3C0426); + fsg_plat_eth[0].hwaddr[4] = readb(f + 0x3C0425); + fsg_plat_eth[0].hwaddr[5] = readb(f + 0x3C0424); + + fsg_plat_eth[1].hwaddr[0] = readb(f + 0x3C0439); + fsg_plat_eth[1].hwaddr[1] = readb(f + 0x3C043F); + fsg_plat_eth[1].hwaddr[2] = readb(f + 0x3C043E); + fsg_plat_eth[1].hwaddr[3] = readb(f + 0x3C043D); + fsg_plat_eth[1].hwaddr[4] = readb(f + 0x3C043C); + fsg_plat_eth[1].hwaddr[5] = readb(f + 0x3C0443); +#endif + iounmap(f); + } + printk(KERN_INFO "FSG: Using MAC address %pM for port 0\n", + fsg_plat_eth[0].hwaddr); + printk(KERN_INFO "FSG: Using MAC address %pM for port 1\n", + fsg_plat_eth[1].hwaddr); + +} + +MACHINE_START(FSG, "Freecom FSG-3") + /* Maintainer: www.nslu2-linux.org */ + .map_io = ixp4xx_map_io, + .init_early = ixp4xx_init_early, + .init_irq = ixp4xx_init_irq, + .init_time = ixp4xx_timer_init, + .atag_offset = 0x100, + .init_machine = fsg_init, +#if defined(CONFIG_PCI) + .dma_zone_size = SZ_64M, +#endif + .restart = ixp4xx_restart, +MACHINE_END + diff --git a/kernel/arch/arm/mach-ixp4xx/gateway7001-pci.c b/kernel/arch/arm/mach-ixp4xx/gateway7001-pci.c new file mode 100644 index 000000000..d9d6cc089 --- /dev/null +++ b/kernel/arch/arm/mach-ixp4xx/gateway7001-pci.c @@ -0,0 +1,63 @@ +/* + * arch/arch/mach-ixp4xx/gateway7001-pci.c + * + * PCI setup routines for Gateway 7001 + * + * Copyright (C) 2007 Imre Kaloz <kaloz@openwrt.org> + * + * based on coyote-pci.c: + * Copyright (C) 2002 Jungo Software Technologies. + * Copyright (C) 2003 MontaVista Softwrae, Inc. + * + * Maintainer: Imre Kaloz <kaloz@openwrt.org> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + */ + +#include <linux/kernel.h> +#include <linux/pci.h> +#include <linux/init.h> +#include <linux/irq.h> + +#include <asm/mach-types.h> +#include <mach/hardware.h> + +#include <asm/mach/pci.h> + +void __init gateway7001_pci_preinit(void) +{ + irq_set_irq_type(IRQ_IXP4XX_GPIO10, IRQ_TYPE_LEVEL_LOW); + irq_set_irq_type(IRQ_IXP4XX_GPIO11, IRQ_TYPE_LEVEL_LOW); + + ixp4xx_pci_preinit(); +} + +static int __init gateway7001_map_irq(const struct pci_dev *dev, u8 slot, + u8 pin) +{ + if (slot == 1) + return IRQ_IXP4XX_GPIO11; + else if (slot == 2) + return IRQ_IXP4XX_GPIO10; + else return -1; +} + +struct hw_pci gateway7001_pci __initdata = { + .nr_controllers = 1, + .ops = &ixp4xx_ops, + .preinit = gateway7001_pci_preinit, + .setup = ixp4xx_setup, + .map_irq = gateway7001_map_irq, +}; + +int __init gateway7001_pci_init(void) +{ + if (machine_is_gateway7001()) + pci_common_init(&gateway7001_pci); + return 0; +} + +subsys_initcall(gateway7001_pci_init); diff --git a/kernel/arch/arm/mach-ixp4xx/gateway7001-setup.c b/kernel/arch/arm/mach-ixp4xx/gateway7001-setup.c new file mode 100644 index 000000000..3d24b3fce --- /dev/null +++ b/kernel/arch/arm/mach-ixp4xx/gateway7001-setup.c @@ -0,0 +1,110 @@ +/* + * arch/arm/mach-ixp4xx/gateway7001-setup.c + * + * Board setup for the Gateway 7001 board + * + * Copyright (C) 2007 Imre Kaloz <kaloz@openwrt.org> + * + * based on coyote-setup.c: + * Copyright (C) 2003-2005 MontaVista Software, Inc. + * + * Author: Imre Kaloz <Kaloz@openwrt.org> + */ + +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/device.h> +#include <linux/serial.h> +#include <linux/tty.h> +#include <linux/serial_8250.h> + +#include <asm/types.h> +#include <asm/setup.h> +#include <asm/memory.h> +#include <mach/hardware.h> +#include <asm/irq.h> +#include <asm/mach-types.h> +#include <asm/mach/arch.h> +#include <asm/mach/flash.h> + +static struct flash_platform_data gateway7001_flash_data = { + .map_name = "cfi_probe", + .width = 2, +}; + +static struct resource gateway7001_flash_resource = { + .flags = IORESOURCE_MEM, +}; + +static struct platform_device gateway7001_flash = { + .name = "IXP4XX-Flash", + .id = 0, + .dev = { + .platform_data = &gateway7001_flash_data, + }, + .num_resources = 1, + .resource = &gateway7001_flash_resource, +}; + +static struct resource gateway7001_uart_resource = { + .start = IXP4XX_UART2_BASE_PHYS, + .end = IXP4XX_UART2_BASE_PHYS + 0x0fff, + .flags = IORESOURCE_MEM, +}; + +static struct plat_serial8250_port gateway7001_uart_data[] = { + { + .mapbase = IXP4XX_UART2_BASE_PHYS, + .membase = (char *)IXP4XX_UART2_BASE_VIRT + REG_OFFSET, + .irq = IRQ_IXP4XX_UART2, + .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST, + .iotype = UPIO_MEM, + .regshift = 2, + .uartclk = IXP4XX_UART_XTAL, + }, + { }, +}; + +static struct platform_device gateway7001_uart = { + .name = "serial8250", + .id = PLAT8250_DEV_PLATFORM, + .dev = { + .platform_data = gateway7001_uart_data, + }, + .num_resources = 1, + .resource = &gateway7001_uart_resource, +}; + +static struct platform_device *gateway7001_devices[] __initdata = { + &gateway7001_flash, + &gateway7001_uart +}; + +static void __init gateway7001_init(void) +{ + ixp4xx_sys_init(); + + gateway7001_flash_resource.start = IXP4XX_EXP_BUS_BASE(0); + gateway7001_flash_resource.end = IXP4XX_EXP_BUS_BASE(0) + SZ_32M - 1; + + *IXP4XX_EXP_CS0 |= IXP4XX_FLASH_WRITABLE; + *IXP4XX_EXP_CS1 = *IXP4XX_EXP_CS0; + + platform_add_devices(gateway7001_devices, ARRAY_SIZE(gateway7001_devices)); +} + +#ifdef CONFIG_MACH_GATEWAY7001 +MACHINE_START(GATEWAY7001, "Gateway 7001 AP") + /* Maintainer: Imre Kaloz <kaloz@openwrt.org> */ + .map_io = ixp4xx_map_io, + .init_early = ixp4xx_init_early, + .init_irq = ixp4xx_init_irq, + .init_time = ixp4xx_timer_init, + .atag_offset = 0x100, + .init_machine = gateway7001_init, +#if defined(CONFIG_PCI) + .dma_zone_size = SZ_64M, +#endif + .restart = ixp4xx_restart, +MACHINE_END +#endif diff --git a/kernel/arch/arm/mach-ixp4xx/goramo_mlr.c b/kernel/arch/arm/mach-ixp4xx/goramo_mlr.c new file mode 100644 index 000000000..80bd9d6d0 --- /dev/null +++ b/kernel/arch/arm/mach-ixp4xx/goramo_mlr.c @@ -0,0 +1,517 @@ +/* + * Goramo MultiLink router platform code + * Copyright (C) 2006-2009 Krzysztof Halasa <khc@pm.waw.pl> + */ + +#include <linux/delay.h> +#include <linux/gpio.h> +#include <linux/hdlc.h> +#include <linux/i2c-gpio.h> +#include <linux/io.h> +#include <linux/irq.h> +#include <linux/kernel.h> +#include <linux/pci.h> +#include <linux/serial_8250.h> +#include <asm/mach-types.h> +#include <asm/mach/arch.h> +#include <asm/mach/flash.h> +#include <asm/mach/pci.h> +#include <asm/system_info.h> + +#define SLOT_ETHA 0x0B /* IDSEL = AD21 */ +#define SLOT_ETHB 0x0C /* IDSEL = AD20 */ +#define SLOT_MPCI 0x0D /* IDSEL = AD19 */ +#define SLOT_NEC 0x0E /* IDSEL = AD18 */ + +/* GPIO lines */ +#define GPIO_SCL 0 +#define GPIO_SDA 1 +#define GPIO_STR 2 +#define GPIO_IRQ_NEC 3 +#define GPIO_IRQ_ETHA 4 +#define GPIO_IRQ_ETHB 5 +#define GPIO_HSS0_DCD_N 6 +#define GPIO_HSS1_DCD_N 7 +#define GPIO_UART0_DCD 8 +#define GPIO_UART1_DCD 9 +#define GPIO_HSS0_CTS_N 10 +#define GPIO_HSS1_CTS_N 11 +#define GPIO_IRQ_MPCI 12 +#define GPIO_HSS1_RTS_N 13 +#define GPIO_HSS0_RTS_N 14 +/* GPIO15 is not connected */ + +/* Control outputs from 74HC4094 */ +#define CONTROL_HSS0_CLK_INT 0 +#define CONTROL_HSS1_CLK_INT 1 +#define CONTROL_HSS0_DTR_N 2 +#define CONTROL_HSS1_DTR_N 3 +#define CONTROL_EXT 4 +#define CONTROL_AUTO_RESET 5 +#define CONTROL_PCI_RESET_N 6 +#define CONTROL_EEPROM_WC_N 7 + +/* offsets from start of flash ROM = 0x50000000 */ +#define CFG_ETH0_ADDRESS 0x40 /* 6 bytes */ +#define CFG_ETH1_ADDRESS 0x46 /* 6 bytes */ +#define CFG_REV 0x4C /* u32 */ +#define CFG_SDRAM_SIZE 0x50 /* u32 */ +#define CFG_SDRAM_CONF 0x54 /* u32 */ +#define CFG_SDRAM_MODE 0x58 /* u32 */ +#define CFG_SDRAM_REFRESH 0x5C /* u32 */ + +#define CFG_HW_BITS 0x60 /* u32 */ +#define CFG_HW_USB_PORTS 0x00000007 /* 0 = no NEC chip, 1-5 = ports # */ +#define CFG_HW_HAS_PCI_SLOT 0x00000008 +#define CFG_HW_HAS_ETH0 0x00000010 +#define CFG_HW_HAS_ETH1 0x00000020 +#define CFG_HW_HAS_HSS0 0x00000040 +#define CFG_HW_HAS_HSS1 0x00000080 +#define CFG_HW_HAS_UART0 0x00000100 +#define CFG_HW_HAS_UART1 0x00000200 +#define CFG_HW_HAS_EEPROM 0x00000400 + +#define FLASH_CMD_READ_ARRAY 0xFF +#define FLASH_CMD_READ_ID 0x90 +#define FLASH_SER_OFF 0x102 /* 0x81 in 16-bit mode */ + +static u32 hw_bits = 0xFFFFFFFD; /* assume all hardware present */; +static u8 control_value; + +static void set_scl(u8 value) +{ + gpio_set_value(GPIO_SCL, !!value); + udelay(3); +} + +static void set_sda(u8 value) +{ + gpio_set_value(GPIO_SDA, !!value); + udelay(3); +} + +static void set_str(u8 value) +{ + gpio_set_value(GPIO_STR, !!value); + udelay(3); +} + +static inline void set_control(int line, int value) +{ + if (value) + control_value |= (1 << line); + else + control_value &= ~(1 << line); +} + + +static void output_control(void) +{ + int i; + + gpio_direction_output(GPIO_SCL, 1); + gpio_direction_output(GPIO_SDA, 1); + + for (i = 0; i < 8; i++) { + set_scl(0); + set_sda(control_value & (0x80 >> i)); /* MSB first */ + set_scl(1); /* active edge */ + } + + set_str(1); + set_str(0); + + set_scl(0); + set_sda(1); /* Be ready for START */ + set_scl(1); +} + + +static void (*set_carrier_cb_tab[2])(void *pdev, int carrier); + +static int hss_set_clock(int port, unsigned int clock_type) +{ + int ctrl_int = port ? CONTROL_HSS1_CLK_INT : CONTROL_HSS0_CLK_INT; + + switch (clock_type) { + case CLOCK_DEFAULT: + case CLOCK_EXT: + set_control(ctrl_int, 0); + output_control(); + return CLOCK_EXT; + + case CLOCK_INT: + set_control(ctrl_int, 1); + output_control(); + return CLOCK_INT; + + default: + return -EINVAL; + } +} + +static irqreturn_t hss_dcd_irq(int irq, void *pdev) +{ + int port = (irq == IXP4XX_GPIO_IRQ(GPIO_HSS1_DCD_N)); + int i = gpio_get_value(port ? GPIO_HSS1_DCD_N : GPIO_HSS0_DCD_N); + set_carrier_cb_tab[port](pdev, !i); + return IRQ_HANDLED; +} + + +static int hss_open(int port, void *pdev, + void (*set_carrier_cb)(void *pdev, int carrier)) +{ + int i, irq; + + if (!port) + irq = IXP4XX_GPIO_IRQ(GPIO_HSS0_DCD_N); + else + irq = IXP4XX_GPIO_IRQ(GPIO_HSS1_DCD_N); + + i = gpio_get_value(port ? GPIO_HSS1_DCD_N : GPIO_HSS0_DCD_N); + set_carrier_cb(pdev, !i); + + set_carrier_cb_tab[!!port] = set_carrier_cb; + + if ((i = request_irq(irq, hss_dcd_irq, 0, "IXP4xx HSS", pdev)) != 0) { + printk(KERN_ERR "ixp4xx_hss: failed to request IRQ%i (%i)\n", + irq, i); + return i; + } + + set_control(port ? CONTROL_HSS1_DTR_N : CONTROL_HSS0_DTR_N, 0); + output_control(); + gpio_set_value(port ? GPIO_HSS1_RTS_N : GPIO_HSS0_RTS_N, 0); + return 0; +} + +static void hss_close(int port, void *pdev) +{ + free_irq(port ? IXP4XX_GPIO_IRQ(GPIO_HSS1_DCD_N) : + IXP4XX_GPIO_IRQ(GPIO_HSS0_DCD_N), pdev); + set_carrier_cb_tab[!!port] = NULL; /* catch bugs */ + + set_control(port ? CONTROL_HSS1_DTR_N : CONTROL_HSS0_DTR_N, 1); + output_control(); + gpio_set_value(port ? GPIO_HSS1_RTS_N : GPIO_HSS0_RTS_N, 1); +} + + +/* Flash memory */ +static struct flash_platform_data flash_data = { + .map_name = "cfi_probe", + .width = 2, +}; + +static struct resource flash_resource = { + .flags = IORESOURCE_MEM, +}; + +static struct platform_device device_flash = { + .name = "IXP4XX-Flash", + .id = 0, + .dev = { .platform_data = &flash_data }, + .num_resources = 1, + .resource = &flash_resource, +}; + + +/* I^2C interface */ +static struct i2c_gpio_platform_data i2c_data = { + .sda_pin = GPIO_SDA, + .scl_pin = GPIO_SCL, +}; + +static struct platform_device device_i2c = { + .name = "i2c-gpio", + .id = 0, + .dev = { .platform_data = &i2c_data }, +}; + + +/* IXP425 2 UART ports */ +static struct resource uart_resources[] = { + { + .start = IXP4XX_UART1_BASE_PHYS, + .end = IXP4XX_UART1_BASE_PHYS + 0x0fff, + .flags = IORESOURCE_MEM, + }, + { + .start = IXP4XX_UART2_BASE_PHYS, + .end = IXP4XX_UART2_BASE_PHYS + 0x0fff, + .flags = IORESOURCE_MEM, + } +}; + +static struct plat_serial8250_port uart_data[] = { + { + .mapbase = IXP4XX_UART1_BASE_PHYS, + .membase = (char __iomem *)IXP4XX_UART1_BASE_VIRT + + REG_OFFSET, + .irq = IRQ_IXP4XX_UART1, + .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST, + .iotype = UPIO_MEM, + .regshift = 2, + .uartclk = IXP4XX_UART_XTAL, + }, + { + .mapbase = IXP4XX_UART2_BASE_PHYS, + .membase = (char __iomem *)IXP4XX_UART2_BASE_VIRT + + REG_OFFSET, + .irq = IRQ_IXP4XX_UART2, + .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST, + .iotype = UPIO_MEM, + .regshift = 2, + .uartclk = IXP4XX_UART_XTAL, + }, + { }, +}; + +static struct platform_device device_uarts = { + .name = "serial8250", + .id = PLAT8250_DEV_PLATFORM, + .dev.platform_data = uart_data, + .num_resources = 2, + .resource = uart_resources, +}; + + +/* Built-in 10/100 Ethernet MAC interfaces */ +static struct eth_plat_info eth_plat[] = { + { + .phy = 0, + .rxq = 3, + .txreadyq = 32, + }, { + .phy = 1, + .rxq = 4, + .txreadyq = 33, + } +}; + +static struct platform_device device_eth_tab[] = { + { + .name = "ixp4xx_eth", + .id = IXP4XX_ETH_NPEB, + .dev.platform_data = eth_plat, + }, { + .name = "ixp4xx_eth", + .id = IXP4XX_ETH_NPEC, + .dev.platform_data = eth_plat + 1, + } +}; + + +/* IXP425 2 synchronous serial ports */ +static struct hss_plat_info hss_plat[] = { + { + .set_clock = hss_set_clock, + .open = hss_open, + .close = hss_close, + .txreadyq = 34, + }, { + .set_clock = hss_set_clock, + .open = hss_open, + .close = hss_close, + .txreadyq = 35, + } +}; + +static struct platform_device device_hss_tab[] = { + { + .name = "ixp4xx_hss", + .id = 0, + .dev.platform_data = hss_plat, + }, { + .name = "ixp4xx_hss", + .id = 1, + .dev.platform_data = hss_plat + 1, + } +}; + + +static struct platform_device *device_tab[7] __initdata = { + &device_flash, /* index 0 */ +}; + +static inline u8 __init flash_readb(u8 __iomem *flash, u32 addr) +{ +#ifdef __ARMEB__ + return __raw_readb(flash + addr); +#else + return __raw_readb(flash + (addr ^ 3)); +#endif +} + +static inline u16 __init flash_readw(u8 __iomem *flash, u32 addr) +{ +#ifdef __ARMEB__ + return __raw_readw(flash + addr); +#else + return __raw_readw(flash + (addr ^ 2)); +#endif +} + +static void __init gmlr_init(void) +{ + u8 __iomem *flash; + int i, devices = 1; /* flash */ + + ixp4xx_sys_init(); + + if ((flash = ioremap(IXP4XX_EXP_BUS_BASE_PHYS, 0x80)) == NULL) + printk(KERN_ERR "goramo-mlr: unable to access system" + " configuration data\n"); + else { + system_rev = __raw_readl(flash + CFG_REV); + hw_bits = __raw_readl(flash + CFG_HW_BITS); + + for (i = 0; i < ETH_ALEN; i++) { + eth_plat[0].hwaddr[i] = + flash_readb(flash, CFG_ETH0_ADDRESS + i); + eth_plat[1].hwaddr[i] = + flash_readb(flash, CFG_ETH1_ADDRESS + i); + } + + __raw_writew(FLASH_CMD_READ_ID, flash); + system_serial_high = flash_readw(flash, FLASH_SER_OFF); + system_serial_high <<= 16; + system_serial_high |= flash_readw(flash, FLASH_SER_OFF + 2); + system_serial_low = flash_readw(flash, FLASH_SER_OFF + 4); + system_serial_low <<= 16; + system_serial_low |= flash_readw(flash, FLASH_SER_OFF + 6); + __raw_writew(FLASH_CMD_READ_ARRAY, flash); + + iounmap(flash); + } + + switch (hw_bits & (CFG_HW_HAS_UART0 | CFG_HW_HAS_UART1)) { + case CFG_HW_HAS_UART0: + memset(&uart_data[1], 0, sizeof(uart_data[1])); + device_uarts.num_resources = 1; + break; + + case CFG_HW_HAS_UART1: + device_uarts.dev.platform_data = &uart_data[1]; + device_uarts.resource = &uart_resources[1]; + device_uarts.num_resources = 1; + break; + } + if (hw_bits & (CFG_HW_HAS_UART0 | CFG_HW_HAS_UART1)) + device_tab[devices++] = &device_uarts; /* max index 1 */ + + if (hw_bits & CFG_HW_HAS_ETH0) + device_tab[devices++] = &device_eth_tab[0]; /* max index 2 */ + if (hw_bits & CFG_HW_HAS_ETH1) + device_tab[devices++] = &device_eth_tab[1]; /* max index 3 */ + + if (hw_bits & CFG_HW_HAS_HSS0) + device_tab[devices++] = &device_hss_tab[0]; /* max index 4 */ + if (hw_bits & CFG_HW_HAS_HSS1) + device_tab[devices++] = &device_hss_tab[1]; /* max index 5 */ + + if (hw_bits & CFG_HW_HAS_EEPROM) + device_tab[devices++] = &device_i2c; /* max index 6 */ + + gpio_request(GPIO_SCL, "SCL/clock"); + gpio_request(GPIO_SDA, "SDA/data"); + gpio_request(GPIO_STR, "strobe"); + gpio_request(GPIO_HSS0_RTS_N, "HSS0 RTS"); + gpio_request(GPIO_HSS1_RTS_N, "HSS1 RTS"); + gpio_request(GPIO_HSS0_DCD_N, "HSS0 DCD"); + gpio_request(GPIO_HSS1_DCD_N, "HSS1 DCD"); + + gpio_direction_output(GPIO_SCL, 1); + gpio_direction_output(GPIO_SDA, 1); + gpio_direction_output(GPIO_STR, 0); + gpio_direction_output(GPIO_HSS0_RTS_N, 1); + gpio_direction_output(GPIO_HSS1_RTS_N, 1); + gpio_direction_input(GPIO_HSS0_DCD_N); + gpio_direction_input(GPIO_HSS1_DCD_N); + irq_set_irq_type(IXP4XX_GPIO_IRQ(GPIO_HSS0_DCD_N), IRQ_TYPE_EDGE_BOTH); + irq_set_irq_type(IXP4XX_GPIO_IRQ(GPIO_HSS1_DCD_N), IRQ_TYPE_EDGE_BOTH); + + set_control(CONTROL_HSS0_DTR_N, 1); + set_control(CONTROL_HSS1_DTR_N, 1); + set_control(CONTROL_EEPROM_WC_N, 1); + set_control(CONTROL_PCI_RESET_N, 1); + output_control(); + + msleep(1); /* Wait for PCI devices to initialize */ + + flash_resource.start = IXP4XX_EXP_BUS_BASE(0); + flash_resource.end = IXP4XX_EXP_BUS_BASE(0) + ixp4xx_exp_bus_size - 1; + + platform_add_devices(device_tab, devices); +} + + +#ifdef CONFIG_PCI +static void __init gmlr_pci_preinit(void) +{ + irq_set_irq_type(IXP4XX_GPIO_IRQ(GPIO_IRQ_ETHA), IRQ_TYPE_LEVEL_LOW); + irq_set_irq_type(IXP4XX_GPIO_IRQ(GPIO_IRQ_ETHB), IRQ_TYPE_LEVEL_LOW); + irq_set_irq_type(IXP4XX_GPIO_IRQ(GPIO_IRQ_NEC), IRQ_TYPE_LEVEL_LOW); + irq_set_irq_type(IXP4XX_GPIO_IRQ(GPIO_IRQ_MPCI), IRQ_TYPE_LEVEL_LOW); + ixp4xx_pci_preinit(); +} + +static void __init gmlr_pci_postinit(void) +{ + if ((hw_bits & CFG_HW_USB_PORTS) >= 2 && + (hw_bits & CFG_HW_USB_PORTS) < 5) { + /* need to adjust number of USB ports on NEC chip */ + u32 value, addr = BIT(32 - SLOT_NEC) | 0xE0; + if (!ixp4xx_pci_read(addr, NP_CMD_CONFIGREAD, &value)) { + value &= ~7; + value |= (hw_bits & CFG_HW_USB_PORTS); + ixp4xx_pci_write(addr, NP_CMD_CONFIGWRITE, value); + } + } +} + +static int __init gmlr_map_irq(const struct pci_dev *dev, u8 slot, u8 pin) +{ + switch(slot) { + case SLOT_ETHA: return IXP4XX_GPIO_IRQ(GPIO_IRQ_ETHA); + case SLOT_ETHB: return IXP4XX_GPIO_IRQ(GPIO_IRQ_ETHB); + case SLOT_NEC: return IXP4XX_GPIO_IRQ(GPIO_IRQ_NEC); + default: return IXP4XX_GPIO_IRQ(GPIO_IRQ_MPCI); + } +} + +static struct hw_pci gmlr_hw_pci __initdata = { + .nr_controllers = 1, + .ops = &ixp4xx_ops, + .preinit = gmlr_pci_preinit, + .postinit = gmlr_pci_postinit, + .setup = ixp4xx_setup, + .map_irq = gmlr_map_irq, +}; + +static int __init gmlr_pci_init(void) +{ + if (machine_is_goramo_mlr() && + (hw_bits & (CFG_HW_USB_PORTS | CFG_HW_HAS_PCI_SLOT))) + pci_common_init(&gmlr_hw_pci); + return 0; +} + +subsys_initcall(gmlr_pci_init); +#endif /* CONFIG_PCI */ + + +MACHINE_START(GORAMO_MLR, "MultiLink") + /* Maintainer: Krzysztof Halasa */ + .map_io = ixp4xx_map_io, + .init_early = ixp4xx_init_early, + .init_irq = ixp4xx_init_irq, + .init_time = ixp4xx_timer_init, + .atag_offset = 0x100, + .init_machine = gmlr_init, +#if defined(CONFIG_PCI) + .dma_zone_size = SZ_64M, +#endif + .restart = ixp4xx_restart, +MACHINE_END diff --git a/kernel/arch/arm/mach-ixp4xx/gtwx5715-pci.c b/kernel/arch/arm/mach-ixp4xx/gtwx5715-pci.c new file mode 100644 index 000000000..551d114c9 --- /dev/null +++ b/kernel/arch/arm/mach-ixp4xx/gtwx5715-pci.c @@ -0,0 +1,84 @@ +/* + * arch/arm/mach-ixp4xx/gtwx5715-pci.c + * + * Gemtek GTWX5715 (Linksys WRV54G) board setup + * + * Copyright (C) 2004 George T. Joseph + * Derived from Coyote + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + * + */ + +#include <linux/pci.h> +#include <linux/init.h> +#include <linux/delay.h> +#include <linux/irq.h> +#include <asm/mach-types.h> +#include <mach/hardware.h> +#include <asm/mach/pci.h> + +#define SLOT0_DEVID 0 +#define SLOT1_DEVID 1 +#define INTA 10 /* slot 1 has INTA and INTB crossed */ +#define INTB 11 + +/* + * Slot 0 isn't actually populated with a card connector but + * we initialize it anyway in case a future version has the + * slot populated or someone with good soldering skills has + * some free time. + */ +void __init gtwx5715_pci_preinit(void) +{ + irq_set_irq_type(IXP4XX_GPIO_IRQ(INTA), IRQ_TYPE_LEVEL_LOW); + irq_set_irq_type(IXP4XX_GPIO_IRQ(INTB), IRQ_TYPE_LEVEL_LOW); + ixp4xx_pci_preinit(); +} + + +static int __init gtwx5715_map_irq(const struct pci_dev *dev, u8 slot, u8 pin) +{ + int rc = -1; + + if ((slot == SLOT0_DEVID && pin == 1) || + (slot == SLOT1_DEVID && pin == 2)) + rc = IXP4XX_GPIO_IRQ(INTA); + else if ((slot == SLOT0_DEVID && pin == 2) || + (slot == SLOT1_DEVID && pin == 1)) + rc = IXP4XX_GPIO_IRQ(INTB); + + printk(KERN_INFO "%s: Mapped slot %d pin %d to IRQ %d\n", + __func__, slot, pin, rc); + return rc; +} + +struct hw_pci gtwx5715_pci __initdata = { + .nr_controllers = 1, + .ops = &ixp4xx_ops, + .preinit = gtwx5715_pci_preinit, + .setup = ixp4xx_setup, + .map_irq = gtwx5715_map_irq, +}; + +int __init gtwx5715_pci_init(void) +{ + if (machine_is_gtwx5715()) + pci_common_init(>wx5715_pci); + + return 0; +} + +subsys_initcall(gtwx5715_pci_init); diff --git a/kernel/arch/arm/mach-ixp4xx/gtwx5715-setup.c b/kernel/arch/arm/mach-ixp4xx/gtwx5715-setup.c new file mode 100644 index 000000000..16a12994f --- /dev/null +++ b/kernel/arch/arm/mach-ixp4xx/gtwx5715-setup.c @@ -0,0 +1,179 @@ +/* + * arch/arm/mach-ixp4xx/gtwx5715-setup.c + * + * Gemtek GTWX5715 (Linksys WRV54G) board setup + * + * Copyright (C) 2004 George T. Joseph + * Derived from Coyote + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + * + */ + +#include <linux/init.h> +#include <linux/device.h> +#include <linux/serial.h> +#include <linux/tty.h> +#include <linux/serial_8250.h> +#include <asm/types.h> +#include <asm/setup.h> +#include <asm/memory.h> +#include <mach/hardware.h> +#include <asm/irq.h> +#include <asm/mach-types.h> +#include <asm/mach/arch.h> +#include <asm/mach/flash.h> + +/* GPIO 5,6,7 and 12 are hard wired to the Kendin KS8995M Switch + and operate as an SPI type interface. The details of the interface + are available on Kendin/Micrel's web site. */ + +#define GTWX5715_KSSPI_SELECT 5 +#define GTWX5715_KSSPI_TXD 6 +#define GTWX5715_KSSPI_CLOCK 7 +#define GTWX5715_KSSPI_RXD 12 + +/* The "reset" button is wired to GPIO 3. + The GPIO is brought "low" when the button is pushed. */ + +#define GTWX5715_BUTTON_GPIO 3 + +/* Board Label Front Label + LED1 Power + LED2 Wireless-G + LED3 not populated but could be + LED4 Internet + LED5 - LED8 Controlled by KS8995M Switch + LED9 DMZ */ + +#define GTWX5715_LED1_GPIO 2 +#define GTWX5715_LED2_GPIO 9 +#define GTWX5715_LED3_GPIO 8 +#define GTWX5715_LED4_GPIO 1 +#define GTWX5715_LED9_GPIO 4 + +/* + * Xscale UART registers are 32 bits wide with only the least + * significant 8 bits having any meaning. From a configuration + * perspective, this means 2 things... + * + * Setting .regshift = 2 so that the standard 16550 registers + * line up on every 4th byte. + * + * Shifting the register start virtual address +3 bytes when + * compiled big-endian. Since register writes are done on a + * single byte basis, if the shift isn't done the driver will + * write the value into the most significant byte of the register, + * which is ignored, instead of the least significant. + */ + +#ifdef __ARMEB__ +#define REG_OFFSET 3 +#else +#define REG_OFFSET 0 +#endif + +/* + * Only the second or "console" uart is connected on the gtwx5715. + */ + +static struct resource gtwx5715_uart_resources[] = { + { + .start = IXP4XX_UART2_BASE_PHYS, + .end = IXP4XX_UART2_BASE_PHYS + 0x0fff, + .flags = IORESOURCE_MEM, + }, + { + .start = IRQ_IXP4XX_UART2, + .end = IRQ_IXP4XX_UART2, + .flags = IORESOURCE_IRQ, + }, + { }, +}; + + +static struct plat_serial8250_port gtwx5715_uart_platform_data[] = { + { + .mapbase = IXP4XX_UART2_BASE_PHYS, + .membase = (char *)IXP4XX_UART2_BASE_VIRT + REG_OFFSET, + .irq = IRQ_IXP4XX_UART2, + .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST, + .iotype = UPIO_MEM, + .regshift = 2, + .uartclk = IXP4XX_UART_XTAL, + }, + { }, +}; + +static struct platform_device gtwx5715_uart_device = { + .name = "serial8250", + .id = PLAT8250_DEV_PLATFORM, + .dev = { + .platform_data = gtwx5715_uart_platform_data, + }, + .num_resources = 2, + .resource = gtwx5715_uart_resources, +}; + +static struct flash_platform_data gtwx5715_flash_data = { + .map_name = "cfi_probe", + .width = 2, +}; + +static struct resource gtwx5715_flash_resource = { + .flags = IORESOURCE_MEM, +}; + +static struct platform_device gtwx5715_flash = { + .name = "IXP4XX-Flash", + .id = 0, + .dev = { + .platform_data = >wx5715_flash_data, + }, + .num_resources = 1, + .resource = >wx5715_flash_resource, +}; + +static struct platform_device *gtwx5715_devices[] __initdata = { + >wx5715_uart_device, + >wx5715_flash, +}; + +static void __init gtwx5715_init(void) +{ + ixp4xx_sys_init(); + + gtwx5715_flash_resource.start = IXP4XX_EXP_BUS_BASE(0); + gtwx5715_flash_resource.end = IXP4XX_EXP_BUS_BASE(0) + SZ_8M - 1; + + platform_add_devices(gtwx5715_devices, ARRAY_SIZE(gtwx5715_devices)); +} + + +MACHINE_START(GTWX5715, "Gemtek GTWX5715 (Linksys WRV54G)") + /* Maintainer: George Joseph */ + .map_io = ixp4xx_map_io, + .init_early = ixp4xx_init_early, + .init_irq = ixp4xx_init_irq, + .init_time = ixp4xx_timer_init, + .atag_offset = 0x100, + .init_machine = gtwx5715_init, +#if defined(CONFIG_PCI) + .dma_zone_size = SZ_64M, +#endif + .restart = ixp4xx_restart, +MACHINE_END + + diff --git a/kernel/arch/arm/mach-ixp4xx/include/mach/cpu.h b/kernel/arch/arm/mach-ixp4xx/include/mach/cpu.h new file mode 100644 index 000000000..ebc0ba31c --- /dev/null +++ b/kernel/arch/arm/mach-ixp4xx/include/mach/cpu.h @@ -0,0 +1,58 @@ +/* + * arch/arm/mach-ixp4xx/include/mach/cpu.h + * + * IXP4XX cpu type detection + * + * Copyright (C) 2007 MontaVista Software, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + */ + +#ifndef __ASM_ARCH_CPU_H__ +#define __ASM_ARCH_CPU_H__ + +#include <linux/io.h> +#include <asm/cputype.h> + +/* Processor id value in CP15 Register 0 */ +#define IXP42X_PROCESSOR_ID_VALUE 0x690541c0 /* including unused 0x690541Ex */ +#define IXP42X_PROCESSOR_ID_MASK 0xffffffc0 + +#define IXP43X_PROCESSOR_ID_VALUE 0x69054040 +#define IXP43X_PROCESSOR_ID_MASK 0xfffffff0 + +#define IXP46X_PROCESSOR_ID_VALUE 0x69054200 /* including IXP455 */ +#define IXP46X_PROCESSOR_ID_MASK 0xfffffff0 + +#define cpu_is_ixp42x_rev_a0() ((read_cpuid_id() & (IXP42X_PROCESSOR_ID_MASK | 0xF)) == \ + IXP42X_PROCESSOR_ID_VALUE) +#define cpu_is_ixp42x() ((read_cpuid_id() & IXP42X_PROCESSOR_ID_MASK) == \ + IXP42X_PROCESSOR_ID_VALUE) +#define cpu_is_ixp43x() ((read_cpuid_id() & IXP43X_PROCESSOR_ID_MASK) == \ + IXP43X_PROCESSOR_ID_VALUE) +#define cpu_is_ixp46x() ((read_cpuid_id() & IXP46X_PROCESSOR_ID_MASK) == \ + IXP46X_PROCESSOR_ID_VALUE) + +static inline u32 ixp4xx_read_feature_bits(void) +{ + u32 val = ~__raw_readl(IXP4XX_EXP_CFG2); + + if (cpu_is_ixp42x_rev_a0()) + return IXP42X_FEATURE_MASK & ~(IXP4XX_FEATURE_RCOMP | + IXP4XX_FEATURE_AES); + if (cpu_is_ixp42x()) + return val & IXP42X_FEATURE_MASK; + if (cpu_is_ixp43x()) + return val & IXP43X_FEATURE_MASK; + return val & IXP46X_FEATURE_MASK; +} + +static inline void ixp4xx_write_feature_bits(u32 value) +{ + __raw_writel(~value, IXP4XX_EXP_CFG2); +} + +#endif /* _ASM_ARCH_CPU_H */ diff --git a/kernel/arch/arm/mach-ixp4xx/include/mach/entry-macro.S b/kernel/arch/arm/mach-ixp4xx/include/mach/entry-macro.S new file mode 100644 index 000000000..79adf83e2 --- /dev/null +++ b/kernel/arch/arm/mach-ixp4xx/include/mach/entry-macro.S @@ -0,0 +1,41 @@ +/* + * arch/arm/mach-ixp4xx/include/mach/entry-macro.S + * + * Low-level IRQ helper macros for IXP4xx-based platforms + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ +#include <mach/hardware.h> + + .macro get_irqnr_preamble, base, tmp + .endm + + .macro get_irqnr_and_base, irqnr, irqstat, base, tmp + ldr \irqstat, =(IXP4XX_INTC_BASE_VIRT+IXP4XX_ICIP_OFFSET) + ldr \irqstat, [\irqstat] @ get interrupts + cmp \irqstat, #0 + beq 1001f @ upper IRQ? + clz \irqnr, \irqstat + mov \base, #31 + sub \irqnr, \base, \irqnr + b 1002f @ lower IRQ being + @ handled + +1001: + /* + * IXP465/IXP435 has an upper IRQ status register + */ +#if defined(CONFIG_CPU_IXP46X) || defined(CONFIG_CPU_IXP43X) + ldr \irqstat, =(IXP4XX_INTC_BASE_VIRT+IXP4XX_ICIP2_OFFSET) + ldr \irqstat, [\irqstat] @ get upper interrupts + mov \irqnr, #63 + clz \irqstat, \irqstat + cmp \irqstat, #32 + subne \irqnr, \irqnr, \irqstat +#endif +1002: + .endm + + diff --git a/kernel/arch/arm/mach-ixp4xx/include/mach/hardware.h b/kernel/arch/arm/mach-ixp4xx/include/mach/hardware.h new file mode 100644 index 000000000..034bb2a1b --- /dev/null +++ b/kernel/arch/arm/mach-ixp4xx/include/mach/hardware.h @@ -0,0 +1,36 @@ +/* + * arch/arm/mach-ixp4xx/include/mach/hardware.h + * + * Copyright (C) 2002 Intel Corporation. + * Copyright (C) 2003-2004 MontaVista Software, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + */ + +/* + * Hardware definitions for IXP4xx based systems + */ + +#ifndef __ASM_ARCH_HARDWARE_H__ +#define __ASM_ARCH_HARDWARE_H__ + +#ifdef CONFIG_IXP4XX_INDIRECT_PCI +#define PCIBIOS_MAX_MEM 0x4FFFFFFF +#else +#define PCIBIOS_MAX_MEM 0x4BFFFFFF +#endif + +/* Register locations and bits */ +#include "ixp4xx-regs.h" + +#ifndef __ASSEMBLER__ +#include <mach/cpu.h> +#endif + +/* Platform helper functions and definitions */ +#include "platform.h" + +#endif /* _ASM_ARCH_HARDWARE_H */ diff --git a/kernel/arch/arm/mach-ixp4xx/include/mach/io.h b/kernel/arch/arm/mach-ixp4xx/include/mach/io.h new file mode 100644 index 000000000..b02439019 --- /dev/null +++ b/kernel/arch/arm/mach-ixp4xx/include/mach/io.h @@ -0,0 +1,530 @@ +/* + * arch/arm/mach-ixp4xx/include/mach/io.h + * + * Author: Deepak Saxena <dsaxena@plexity.net> + * + * Copyright (C) 2002-2005 MontaVista Software, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef __ASM_ARM_ARCH_IO_H +#define __ASM_ARM_ARCH_IO_H + +#include <linux/bitops.h> + +#include <mach/hardware.h> + +extern int (*ixp4xx_pci_read)(u32 addr, u32 cmd, u32* data); +extern int ixp4xx_pci_write(u32 addr, u32 cmd, u32 data); + + +/* + * IXP4xx provides two methods of accessing PCI memory space: + * + * 1) A direct mapped window from 0x48000000 to 0x4BFFFFFF (64MB). + * To access PCI via this space, we simply ioremap() the BAR + * into the kernel and we can use the standard read[bwl]/write[bwl] + * macros. This is the preffered method due to speed but it + * limits the system to just 64MB of PCI memory. This can be + * problematic if using video cards and other memory-heavy targets. + * + * 2) If > 64MB of memory space is required, the IXP4xx can use indirect + * registers to access the whole 4 GB of PCI memory space (as we do below + * for I/O transactions). This allows currently for up to 1 GB (0x10000000 + * to 0x4FFFFFFF) of memory on the bus. The disadvantage of this is that + * every PCI access requires three local register accesses plus a spinlock, + * but in some cases the performance hit is acceptable. In addition, you + * cannot mmap() PCI devices in this case. + */ +#ifdef CONFIG_IXP4XX_INDIRECT_PCI + +/* + * In the case of using indirect PCI, we simply return the actual PCI + * address and our read/write implementation use that to drive the + * access registers. If something outside of PCI is ioremap'd, we + * fallback to the default. + */ + +extern unsigned long pcibios_min_mem; +static inline int is_pci_memory(u32 addr) +{ + return (addr >= pcibios_min_mem) && (addr <= 0x4FFFFFFF); +} + +#define writeb(v, p) __indirect_writeb(v, p) +#define writew(v, p) __indirect_writew(v, p) +#define writel(v, p) __indirect_writel(v, p) + +#define writeb_relaxed(v, p) __indirect_writeb(v, p) +#define writew_relaxed(v, p) __indirect_writew(v, p) +#define writel_relaxed(v, p) __indirect_writel(v, p) + +#define writesb(p, v, l) __indirect_writesb(p, v, l) +#define writesw(p, v, l) __indirect_writesw(p, v, l) +#define writesl(p, v, l) __indirect_writesl(p, v, l) + +#define readb(p) __indirect_readb(p) +#define readw(p) __indirect_readw(p) +#define readl(p) __indirect_readl(p) + +#define readb_relaxed(p) __indirect_readb(p) +#define readw_relaxed(p) __indirect_readw(p) +#define readl_relaxed(p) __indirect_readl(p) + +#define readsb(p, v, l) __indirect_readsb(p, v, l) +#define readsw(p, v, l) __indirect_readsw(p, v, l) +#define readsl(p, v, l) __indirect_readsl(p, v, l) + +static inline void __indirect_writeb(u8 value, volatile void __iomem *p) +{ + u32 addr = (u32)p; + u32 n, byte_enables, data; + + if (!is_pci_memory(addr)) { + __raw_writeb(value, p); + return; + } + + n = addr % 4; + byte_enables = (0xf & ~BIT(n)) << IXP4XX_PCI_NP_CBE_BESL; + data = value << (8*n); + ixp4xx_pci_write(addr, byte_enables | NP_CMD_MEMWRITE, data); +} + +static inline void __indirect_writesb(volatile void __iomem *bus_addr, + const u8 *vaddr, int count) +{ + while (count--) + writeb(*vaddr++, bus_addr); +} + +static inline void __indirect_writew(u16 value, volatile void __iomem *p) +{ + u32 addr = (u32)p; + u32 n, byte_enables, data; + + if (!is_pci_memory(addr)) { + __raw_writew(value, p); + return; + } + + n = addr % 4; + byte_enables = (0xf & ~(BIT(n) | BIT(n+1))) << IXP4XX_PCI_NP_CBE_BESL; + data = value << (8*n); + ixp4xx_pci_write(addr, byte_enables | NP_CMD_MEMWRITE, data); +} + +static inline void __indirect_writesw(volatile void __iomem *bus_addr, + const u16 *vaddr, int count) +{ + while (count--) + writew(*vaddr++, bus_addr); +} + +static inline void __indirect_writel(u32 value, volatile void __iomem *p) +{ + u32 addr = (__force u32)p; + + if (!is_pci_memory(addr)) { + __raw_writel(value, p); + return; + } + + ixp4xx_pci_write(addr, NP_CMD_MEMWRITE, value); +} + +static inline void __indirect_writesl(volatile void __iomem *bus_addr, + const u32 *vaddr, int count) +{ + while (count--) + writel(*vaddr++, bus_addr); +} + +static inline unsigned char __indirect_readb(const volatile void __iomem *p) +{ + u32 addr = (u32)p; + u32 n, byte_enables, data; + + if (!is_pci_memory(addr)) + return __raw_readb(p); + + n = addr % 4; + byte_enables = (0xf & ~BIT(n)) << IXP4XX_PCI_NP_CBE_BESL; + if (ixp4xx_pci_read(addr, byte_enables | NP_CMD_MEMREAD, &data)) + return 0xff; + + return data >> (8*n); +} + +static inline void __indirect_readsb(const volatile void __iomem *bus_addr, + u8 *vaddr, u32 count) +{ + while (count--) + *vaddr++ = readb(bus_addr); +} + +static inline unsigned short __indirect_readw(const volatile void __iomem *p) +{ + u32 addr = (u32)p; + u32 n, byte_enables, data; + + if (!is_pci_memory(addr)) + return __raw_readw(p); + + n = addr % 4; + byte_enables = (0xf & ~(BIT(n) | BIT(n+1))) << IXP4XX_PCI_NP_CBE_BESL; + if (ixp4xx_pci_read(addr, byte_enables | NP_CMD_MEMREAD, &data)) + return 0xffff; + + return data>>(8*n); +} + +static inline void __indirect_readsw(const volatile void __iomem *bus_addr, + u16 *vaddr, u32 count) +{ + while (count--) + *vaddr++ = readw(bus_addr); +} + +static inline unsigned long __indirect_readl(const volatile void __iomem *p) +{ + u32 addr = (__force u32)p; + u32 data; + + if (!is_pci_memory(addr)) + return __raw_readl(p); + + if (ixp4xx_pci_read(addr, NP_CMD_MEMREAD, &data)) + return 0xffffffff; + + return data; +} + +static inline void __indirect_readsl(const volatile void __iomem *bus_addr, + u32 *vaddr, u32 count) +{ + while (count--) + *vaddr++ = readl(bus_addr); +} + + +/* + * We can use the built-in functions b/c they end up calling writeb/readb + */ +#define memset_io(c,v,l) _memset_io((c),(v),(l)) +#define memcpy_fromio(a,c,l) _memcpy_fromio((a),(c),(l)) +#define memcpy_toio(c,a,l) _memcpy_toio((c),(a),(l)) + +#endif /* CONFIG_IXP4XX_INDIRECT_PCI */ + +#ifndef CONFIG_PCI + +#define __io(v) __typesafe_io(v) + +#else + +/* + * IXP4xx does not have a transparent cpu -> PCI I/O translation + * window. Instead, it has a set of registers that must be tweaked + * with the proper byte lanes, command types, and address for the + * transaction. This means that we need to override the default + * I/O functions. + */ + +#define outb outb +static inline void outb(u8 value, u32 addr) +{ + u32 n, byte_enables, data; + n = addr % 4; + byte_enables = (0xf & ~BIT(n)) << IXP4XX_PCI_NP_CBE_BESL; + data = value << (8*n); + ixp4xx_pci_write(addr, byte_enables | NP_CMD_IOWRITE, data); +} + +#define outsb outsb +static inline void outsb(u32 io_addr, const void *p, u32 count) +{ + const u8 *vaddr = p; + + while (count--) + outb(*vaddr++, io_addr); +} + +#define outw outw +static inline void outw(u16 value, u32 addr) +{ + u32 n, byte_enables, data; + n = addr % 4; + byte_enables = (0xf & ~(BIT(n) | BIT(n+1))) << IXP4XX_PCI_NP_CBE_BESL; + data = value << (8*n); + ixp4xx_pci_write(addr, byte_enables | NP_CMD_IOWRITE, data); +} + +#define outsw outsw +static inline void outsw(u32 io_addr, const void *p, u32 count) +{ + const u16 *vaddr = p; + while (count--) + outw(cpu_to_le16(*vaddr++), io_addr); +} + +#define outl outl +static inline void outl(u32 value, u32 addr) +{ + ixp4xx_pci_write(addr, NP_CMD_IOWRITE, value); +} + +#define outsl outsl +static inline void outsl(u32 io_addr, const void *p, u32 count) +{ + const u32 *vaddr = p; + while (count--) + outl(cpu_to_le32(*vaddr++), io_addr); +} + +#define inb inb +static inline u8 inb(u32 addr) +{ + u32 n, byte_enables, data; + n = addr % 4; + byte_enables = (0xf & ~BIT(n)) << IXP4XX_PCI_NP_CBE_BESL; + if (ixp4xx_pci_read(addr, byte_enables | NP_CMD_IOREAD, &data)) + return 0xff; + + return data >> (8*n); +} + +#define insb insb +static inline void insb(u32 io_addr, void *p, u32 count) +{ + u8 *vaddr = p; + while (count--) + *vaddr++ = inb(io_addr); +} + +#define inw inw +static inline u16 inw(u32 addr) +{ + u32 n, byte_enables, data; + n = addr % 4; + byte_enables = (0xf & ~(BIT(n) | BIT(n+1))) << IXP4XX_PCI_NP_CBE_BESL; + if (ixp4xx_pci_read(addr, byte_enables | NP_CMD_IOREAD, &data)) + return 0xffff; + + return data>>(8*n); +} + +#define insw insw +static inline void insw(u32 io_addr, void *p, u32 count) +{ + u16 *vaddr = p; + while (count--) + *vaddr++ = le16_to_cpu(inw(io_addr)); +} + +#define inl inl +static inline u32 inl(u32 addr) +{ + u32 data; + if (ixp4xx_pci_read(addr, NP_CMD_IOREAD, &data)) + return 0xffffffff; + + return data; +} + +#define insl insl +static inline void insl(u32 io_addr, void *p, u32 count) +{ + u32 *vaddr = p; + while (count--) + *vaddr++ = le32_to_cpu(inl(io_addr)); +} + +#define PIO_OFFSET 0x10000UL +#define PIO_MASK 0x0ffffUL + +#define __is_io_address(p) (((unsigned long)p >= PIO_OFFSET) && \ + ((unsigned long)p <= (PIO_MASK + PIO_OFFSET))) + +#define ioread8(p) ioread8(p) +static inline unsigned int ioread8(const void __iomem *addr) +{ + unsigned long port = (unsigned long __force)addr; + if (__is_io_address(port)) + return (unsigned int)inb(port & PIO_MASK); + else +#ifndef CONFIG_IXP4XX_INDIRECT_PCI + return (unsigned int)__raw_readb(addr); +#else + return (unsigned int)__indirect_readb(addr); +#endif +} + +#define ioread8_rep(p, v, c) ioread8_rep(p, v, c) +static inline void ioread8_rep(const void __iomem *addr, void *vaddr, u32 count) +{ + unsigned long port = (unsigned long __force)addr; + if (__is_io_address(port)) + insb(port & PIO_MASK, vaddr, count); + else +#ifndef CONFIG_IXP4XX_INDIRECT_PCI + __raw_readsb(addr, vaddr, count); +#else + __indirect_readsb(addr, vaddr, count); +#endif +} + +#define ioread16(p) ioread16(p) +static inline unsigned int ioread16(const void __iomem *addr) +{ + unsigned long port = (unsigned long __force)addr; + if (__is_io_address(port)) + return (unsigned int)inw(port & PIO_MASK); + else +#ifndef CONFIG_IXP4XX_INDIRECT_PCI + return le16_to_cpu((__force __le16)__raw_readw(addr)); +#else + return (unsigned int)__indirect_readw(addr); +#endif +} + +#define ioread16_rep(p, v, c) ioread16_rep(p, v, c) +static inline void ioread16_rep(const void __iomem *addr, void *vaddr, + u32 count) +{ + unsigned long port = (unsigned long __force)addr; + if (__is_io_address(port)) + insw(port & PIO_MASK, vaddr, count); + else +#ifndef CONFIG_IXP4XX_INDIRECT_PCI + __raw_readsw(addr, vaddr, count); +#else + __indirect_readsw(addr, vaddr, count); +#endif +} + +#define ioread32(p) ioread32(p) +static inline unsigned int ioread32(const void __iomem *addr) +{ + unsigned long port = (unsigned long __force)addr; + if (__is_io_address(port)) + return (unsigned int)inl(port & PIO_MASK); + else { +#ifndef CONFIG_IXP4XX_INDIRECT_PCI + return le32_to_cpu((__force __le32)__raw_readl(addr)); +#else + return (unsigned int)__indirect_readl(addr); +#endif + } +} + +#define ioread32_rep(p, v, c) ioread32_rep(p, v, c) +static inline void ioread32_rep(const void __iomem *addr, void *vaddr, + u32 count) +{ + unsigned long port = (unsigned long __force)addr; + if (__is_io_address(port)) + insl(port & PIO_MASK, vaddr, count); + else +#ifndef CONFIG_IXP4XX_INDIRECT_PCI + __raw_readsl(addr, vaddr, count); +#else + __indirect_readsl(addr, vaddr, count); +#endif +} + +#define iowrite8(v, p) iowrite8(v, p) +static inline void iowrite8(u8 value, void __iomem *addr) +{ + unsigned long port = (unsigned long __force)addr; + if (__is_io_address(port)) + outb(value, port & PIO_MASK); + else +#ifndef CONFIG_IXP4XX_INDIRECT_PCI + __raw_writeb(value, addr); +#else + __indirect_writeb(value, addr); +#endif +} + +#define iowrite8_rep(p, v, c) iowrite8_rep(p, v, c) +static inline void iowrite8_rep(void __iomem *addr, const void *vaddr, + u32 count) +{ + unsigned long port = (unsigned long __force)addr; + if (__is_io_address(port)) + outsb(port & PIO_MASK, vaddr, count); + else +#ifndef CONFIG_IXP4XX_INDIRECT_PCI + __raw_writesb(addr, vaddr, count); +#else + __indirect_writesb(addr, vaddr, count); +#endif +} + +#define iowrite16(v, p) iowrite16(v, p) +static inline void iowrite16(u16 value, void __iomem *addr) +{ + unsigned long port = (unsigned long __force)addr; + if (__is_io_address(port)) + outw(value, port & PIO_MASK); + else +#ifndef CONFIG_IXP4XX_INDIRECT_PCI + __raw_writew(cpu_to_le16(value), addr); +#else + __indirect_writew(value, addr); +#endif +} + +#define iowrite16_rep(p, v, c) iowrite16_rep(p, v, c) +static inline void iowrite16_rep(void __iomem *addr, const void *vaddr, + u32 count) +{ + unsigned long port = (unsigned long __force)addr; + if (__is_io_address(port)) + outsw(port & PIO_MASK, vaddr, count); + else +#ifndef CONFIG_IXP4XX_INDIRECT_PCI + __raw_writesw(addr, vaddr, count); +#else + __indirect_writesw(addr, vaddr, count); +#endif +} + +#define iowrite32(v, p) iowrite32(v, p) +static inline void iowrite32(u32 value, void __iomem *addr) +{ + unsigned long port = (unsigned long __force)addr; + if (__is_io_address(port)) + outl(value, port & PIO_MASK); + else +#ifndef CONFIG_IXP4XX_INDIRECT_PCI + __raw_writel((u32 __force)cpu_to_le32(value), addr); +#else + __indirect_writel(value, addr); +#endif +} + +#define iowrite32_rep(p, v, c) iowrite32_rep(p, v, c) +static inline void iowrite32_rep(void __iomem *addr, const void *vaddr, + u32 count) +{ + unsigned long port = (unsigned long __force)addr; + if (__is_io_address(port)) + outsl(port & PIO_MASK, vaddr, count); + else +#ifndef CONFIG_IXP4XX_INDIRECT_PCI + __raw_writesl(addr, vaddr, count); +#else + __indirect_writesl(addr, vaddr, count); +#endif +} + +#define ioport_map(port, nr) ((void __iomem*)(port + PIO_OFFSET)) +#define ioport_unmap(addr) +#endif /* CONFIG_PCI */ + +#endif /* __ASM_ARM_ARCH_IO_H */ diff --git a/kernel/arch/arm/mach-ixp4xx/include/mach/irqs.h b/kernel/arch/arm/mach-ixp4xx/include/mach/irqs.h new file mode 100644 index 000000000..7e6d4cce7 --- /dev/null +++ b/kernel/arch/arm/mach-ixp4xx/include/mach/irqs.h @@ -0,0 +1,75 @@ +/* + * arch/arm/mach-ixp4xx/include/mach/irqs.h + * + * IRQ definitions for IXP4XX based systems + * + * Copyright (C) 2002 Intel Corporation. + * Copyright (C) 2003 MontaVista Software, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + */ + +#ifndef _ARCH_IXP4XX_IRQS_H_ +#define _ARCH_IXP4XX_IRQS_H_ + +#define IRQ_IXP4XX_NPEA 0 +#define IRQ_IXP4XX_NPEB 1 +#define IRQ_IXP4XX_NPEC 2 +#define IRQ_IXP4XX_QM1 3 +#define IRQ_IXP4XX_QM2 4 +#define IRQ_IXP4XX_TIMER1 5 +#define IRQ_IXP4XX_GPIO0 6 +#define IRQ_IXP4XX_GPIO1 7 +#define IRQ_IXP4XX_PCI_INT 8 +#define IRQ_IXP4XX_PCI_DMA1 9 +#define IRQ_IXP4XX_PCI_DMA2 10 +#define IRQ_IXP4XX_TIMER2 11 +#define IRQ_IXP4XX_USB 12 +#define IRQ_IXP4XX_UART2 13 +#define IRQ_IXP4XX_TIMESTAMP 14 +#define IRQ_IXP4XX_UART1 15 +#define IRQ_IXP4XX_WDOG 16 +#define IRQ_IXP4XX_AHB_PMU 17 +#define IRQ_IXP4XX_XSCALE_PMU 18 +#define IRQ_IXP4XX_GPIO2 19 +#define IRQ_IXP4XX_GPIO3 20 +#define IRQ_IXP4XX_GPIO4 21 +#define IRQ_IXP4XX_GPIO5 22 +#define IRQ_IXP4XX_GPIO6 23 +#define IRQ_IXP4XX_GPIO7 24 +#define IRQ_IXP4XX_GPIO8 25 +#define IRQ_IXP4XX_GPIO9 26 +#define IRQ_IXP4XX_GPIO10 27 +#define IRQ_IXP4XX_GPIO11 28 +#define IRQ_IXP4XX_GPIO12 29 +#define IRQ_IXP4XX_SW_INT1 30 +#define IRQ_IXP4XX_SW_INT2 31 +#define IRQ_IXP4XX_USB_HOST 32 +#define IRQ_IXP4XX_I2C 33 +#define IRQ_IXP4XX_SSP 34 +#define IRQ_IXP4XX_TSYNC 35 +#define IRQ_IXP4XX_EAU_DONE 36 +#define IRQ_IXP4XX_SHA_DONE 37 +#define IRQ_IXP4XX_SWCP_PE 58 +#define IRQ_IXP4XX_QM_PE 60 +#define IRQ_IXP4XX_MCU_ECC 61 +#define IRQ_IXP4XX_EXP_PE 62 + +#define _IXP4XX_GPIO_IRQ(n) (IRQ_IXP4XX_GPIO ## n) +#define IXP4XX_GPIO_IRQ(n) _IXP4XX_GPIO_IRQ(n) + +/* + * Only first 32 sources are valid if running on IXP42x systems + */ +#if defined(CONFIG_CPU_IXP46X) || defined(CONFIG_CPU_IXP43X) +#define NR_IRQS 64 +#else +#define NR_IRQS 32 +#endif + +#define XSCALE_PMU_IRQ (IRQ_IXP4XX_XSCALE_PMU) + +#endif diff --git a/kernel/arch/arm/mach-ixp4xx/include/mach/ixp46x_ts.h b/kernel/arch/arm/mach-ixp4xx/include/mach/ixp46x_ts.h new file mode 100644 index 000000000..cf03614d2 --- /dev/null +++ b/kernel/arch/arm/mach-ixp4xx/include/mach/ixp46x_ts.h @@ -0,0 +1,81 @@ +/* + * PTP 1588 clock using the IXP46X + * + * Copyright (C) 2010 OMICRON electronics GmbH + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#ifndef _IXP46X_TS_H_ +#define _IXP46X_TS_H_ + +#define DEFAULT_ADDEND 0xF0000029 +#define TICKS_NS_SHIFT 4 + +struct ixp46x_channel_ctl { + u32 ch_control; /* 0x40 Time Synchronization Channel Control */ + u32 ch_event; /* 0x44 Time Synchronization Channel Event */ + u32 tx_snap_lo; /* 0x48 Transmit Snapshot Low Register */ + u32 tx_snap_hi; /* 0x4C Transmit Snapshot High Register */ + u32 rx_snap_lo; /* 0x50 Receive Snapshot Low Register */ + u32 rx_snap_hi; /* 0x54 Receive Snapshot High Register */ + u32 src_uuid_lo; /* 0x58 Source UUID0 Low Register */ + u32 src_uuid_hi; /* 0x5C Sequence Identifier/Source UUID0 High */ +}; + +struct ixp46x_ts_regs { + u32 control; /* 0x00 Time Sync Control Register */ + u32 event; /* 0x04 Time Sync Event Register */ + u32 addend; /* 0x08 Time Sync Addend Register */ + u32 accum; /* 0x0C Time Sync Accumulator Register */ + u32 test; /* 0x10 Time Sync Test Register */ + u32 unused; /* 0x14 */ + u32 rsystime_lo; /* 0x18 RawSystemTime_Low Register */ + u32 rsystime_hi; /* 0x1C RawSystemTime_High Register */ + u32 systime_lo; /* 0x20 SystemTime_Low Register */ + u32 systime_hi; /* 0x24 SystemTime_High Register */ + u32 trgt_lo; /* 0x28 TargetTime_Low Register */ + u32 trgt_hi; /* 0x2C TargetTime_High Register */ + u32 asms_lo; /* 0x30 Auxiliary Slave Mode Snapshot Low */ + u32 asms_hi; /* 0x34 Auxiliary Slave Mode Snapshot High */ + u32 amms_lo; /* 0x38 Auxiliary Master Mode Snapshot Low */ + u32 amms_hi; /* 0x3C Auxiliary Master Mode Snapshot High */ + + struct ixp46x_channel_ctl channel[3]; +}; + +/* 0x00 Time Sync Control Register Bits */ +#define TSCR_AMM (1<<3) +#define TSCR_ASM (1<<2) +#define TSCR_TTM (1<<1) +#define TSCR_RST (1<<0) + +/* 0x04 Time Sync Event Register Bits */ +#define TSER_SNM (1<<3) +#define TSER_SNS (1<<2) +#define TTIPEND (1<<1) + +/* 0x40 Time Synchronization Channel Control Register Bits */ +#define MASTER_MODE (1<<0) +#define TIMESTAMP_ALL (1<<1) + +/* 0x44 Time Synchronization Channel Event Register Bits */ +#define TX_SNAPSHOT_LOCKED (1<<0) +#define RX_SNAPSHOT_LOCKED (1<<1) + +/* The ptp_ixp46x module will set this variable */ +extern int ixp46x_phc_index; + +#endif diff --git a/kernel/arch/arm/mach-ixp4xx/include/mach/ixp4xx-regs.h b/kernel/arch/arm/mach-ixp4xx/include/mach/ixp4xx-regs.h new file mode 100644 index 000000000..c5bae9c03 --- /dev/null +++ b/kernel/arch/arm/mach-ixp4xx/include/mach/ixp4xx-regs.h @@ -0,0 +1,652 @@ +/* + * arch/arm/mach-ixp4xx/include/mach/ixp4xx-regs.h + * + * Register definitions for IXP4xx chipset. This file contains + * register location and bit definitions only. Platform specific + * definitions and helper function declarations are in platform.h + * and machine-name.h. + * + * Copyright (C) 2002 Intel Corporation. + * Copyright (C) 2003-2004 MontaVista Software, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + */ + +#ifndef _ASM_ARM_IXP4XX_H_ +#define _ASM_ARM_IXP4XX_H_ + +/* + * IXP4xx Linux Memory Map: + * + * Phy Size Virt Description + * ========================================================================= + * + * 0x00000000 0x10000000(max) PAGE_OFFSET System RAM + * + * 0x48000000 0x04000000 ioremap'd PCI Memory Space + * + * 0x50000000 0x10000000 ioremap'd EXP BUS + * + * 0xC8000000 0x00013000 0xFEF00000 On-Chip Peripherals + * + * 0xC0000000 0x00001000 0xFEF13000 PCI CFG + * + * 0xC4000000 0x00001000 0xFEF14000 EXP CFG + * + * 0x60000000 0x00004000 0xFEF15000 QMgr + */ + +/* + * Queue Manager + */ +#define IXP4XX_QMGR_BASE_PHYS 0x60000000 +#define IXP4XX_QMGR_BASE_VIRT IOMEM(0xFEF15000) +#define IXP4XX_QMGR_REGION_SIZE 0x00004000 + +/* + * Peripheral space, including debug UART. Must be section-aligned so that + * it can be used with the low-level debug code. + */ +#define IXP4XX_PERIPHERAL_BASE_PHYS 0xC8000000 +#define IXP4XX_PERIPHERAL_BASE_VIRT IOMEM(0xFEF00000) +#define IXP4XX_PERIPHERAL_REGION_SIZE 0x00013000 + +/* + * PCI Config registers + */ +#define IXP4XX_PCI_CFG_BASE_PHYS 0xC0000000 +#define IXP4XX_PCI_CFG_BASE_VIRT IOMEM(0xFEF13000) +#define IXP4XX_PCI_CFG_REGION_SIZE 0x00001000 + +/* + * Expansion BUS Configuration registers + */ +#define IXP4XX_EXP_CFG_BASE_PHYS 0xC4000000 +#define IXP4XX_EXP_CFG_BASE_VIRT 0xFEF14000 +#define IXP4XX_EXP_CFG_REGION_SIZE 0x00001000 + +#define IXP4XX_EXP_CS0_OFFSET 0x00 +#define IXP4XX_EXP_CS1_OFFSET 0x04 +#define IXP4XX_EXP_CS2_OFFSET 0x08 +#define IXP4XX_EXP_CS3_OFFSET 0x0C +#define IXP4XX_EXP_CS4_OFFSET 0x10 +#define IXP4XX_EXP_CS5_OFFSET 0x14 +#define IXP4XX_EXP_CS6_OFFSET 0x18 +#define IXP4XX_EXP_CS7_OFFSET 0x1C +#define IXP4XX_EXP_CFG0_OFFSET 0x20 +#define IXP4XX_EXP_CFG1_OFFSET 0x24 +#define IXP4XX_EXP_CFG2_OFFSET 0x28 +#define IXP4XX_EXP_CFG3_OFFSET 0x2C + +/* + * Expansion Bus Controller registers. + */ +#define IXP4XX_EXP_REG(x) ((volatile u32 __iomem *)(IXP4XX_EXP_CFG_BASE_VIRT+(x))) + +#define IXP4XX_EXP_CS0 IXP4XX_EXP_REG(IXP4XX_EXP_CS0_OFFSET) +#define IXP4XX_EXP_CS1 IXP4XX_EXP_REG(IXP4XX_EXP_CS1_OFFSET) +#define IXP4XX_EXP_CS2 IXP4XX_EXP_REG(IXP4XX_EXP_CS2_OFFSET) +#define IXP4XX_EXP_CS3 IXP4XX_EXP_REG(IXP4XX_EXP_CS3_OFFSET) +#define IXP4XX_EXP_CS4 IXP4XX_EXP_REG(IXP4XX_EXP_CS4_OFFSET) +#define IXP4XX_EXP_CS5 IXP4XX_EXP_REG(IXP4XX_EXP_CS5_OFFSET) +#define IXP4XX_EXP_CS6 IXP4XX_EXP_REG(IXP4XX_EXP_CS6_OFFSET) +#define IXP4XX_EXP_CS7 IXP4XX_EXP_REG(IXP4XX_EXP_CS7_OFFSET) + +#define IXP4XX_EXP_CFG0 IXP4XX_EXP_REG(IXP4XX_EXP_CFG0_OFFSET) +#define IXP4XX_EXP_CFG1 IXP4XX_EXP_REG(IXP4XX_EXP_CFG1_OFFSET) +#define IXP4XX_EXP_CFG2 IXP4XX_EXP_REG(IXP4XX_EXP_CFG2_OFFSET) +#define IXP4XX_EXP_CFG3 IXP4XX_EXP_REG(IXP4XX_EXP_CFG3_OFFSET) + + +/* + * Peripheral Space Register Region Base Addresses + */ +#define IXP4XX_UART1_BASE_PHYS (IXP4XX_PERIPHERAL_BASE_PHYS + 0x0000) +#define IXP4XX_UART2_BASE_PHYS (IXP4XX_PERIPHERAL_BASE_PHYS + 0x1000) +#define IXP4XX_PMU_BASE_PHYS (IXP4XX_PERIPHERAL_BASE_PHYS + 0x2000) +#define IXP4XX_INTC_BASE_PHYS (IXP4XX_PERIPHERAL_BASE_PHYS + 0x3000) +#define IXP4XX_GPIO_BASE_PHYS (IXP4XX_PERIPHERAL_BASE_PHYS + 0x4000) +#define IXP4XX_TIMER_BASE_PHYS (IXP4XX_PERIPHERAL_BASE_PHYS + 0x5000) +#define IXP4XX_NPEA_BASE_PHYS (IXP4XX_PERIPHERAL_BASE_PHYS + 0x6000) +#define IXP4XX_NPEB_BASE_PHYS (IXP4XX_PERIPHERAL_BASE_PHYS + 0x7000) +#define IXP4XX_NPEC_BASE_PHYS (IXP4XX_PERIPHERAL_BASE_PHYS + 0x8000) +#define IXP4XX_EthB_BASE_PHYS (IXP4XX_PERIPHERAL_BASE_PHYS + 0x9000) +#define IXP4XX_EthC_BASE_PHYS (IXP4XX_PERIPHERAL_BASE_PHYS + 0xA000) +#define IXP4XX_USB_BASE_PHYS (IXP4XX_PERIPHERAL_BASE_PHYS + 0xB000) +/* ixp46X only */ +#define IXP4XX_EthA_BASE_PHYS (IXP4XX_PERIPHERAL_BASE_PHYS + 0xC000) +#define IXP4XX_EthB1_BASE_PHYS (IXP4XX_PERIPHERAL_BASE_PHYS + 0xD000) +#define IXP4XX_EthB2_BASE_PHYS (IXP4XX_PERIPHERAL_BASE_PHYS + 0xE000) +#define IXP4XX_EthB3_BASE_PHYS (IXP4XX_PERIPHERAL_BASE_PHYS + 0xF000) +#define IXP4XX_TIMESYNC_BASE_PHYS (IXP4XX_PERIPHERAL_BASE_PHYS + 0x10000) +#define IXP4XX_I2C_BASE_PHYS (IXP4XX_PERIPHERAL_BASE_PHYS + 0x11000) +#define IXP4XX_SSP_BASE_PHYS (IXP4XX_PERIPHERAL_BASE_PHYS + 0x12000) + + +#define IXP4XX_UART1_BASE_VIRT (IXP4XX_PERIPHERAL_BASE_VIRT + 0x0000) +#define IXP4XX_UART2_BASE_VIRT (IXP4XX_PERIPHERAL_BASE_VIRT + 0x1000) +#define IXP4XX_PMU_BASE_VIRT (IXP4XX_PERIPHERAL_BASE_VIRT + 0x2000) +#define IXP4XX_INTC_BASE_VIRT (IXP4XX_PERIPHERAL_BASE_VIRT + 0x3000) +#define IXP4XX_GPIO_BASE_VIRT (IXP4XX_PERIPHERAL_BASE_VIRT + 0x4000) +#define IXP4XX_TIMER_BASE_VIRT (IXP4XX_PERIPHERAL_BASE_VIRT + 0x5000) +#define IXP4XX_NPEA_BASE_VIRT (IXP4XX_PERIPHERAL_BASE_VIRT + 0x6000) +#define IXP4XX_NPEB_BASE_VIRT (IXP4XX_PERIPHERAL_BASE_VIRT + 0x7000) +#define IXP4XX_NPEC_BASE_VIRT (IXP4XX_PERIPHERAL_BASE_VIRT + 0x8000) +#define IXP4XX_EthB_BASE_VIRT (IXP4XX_PERIPHERAL_BASE_VIRT + 0x9000) +#define IXP4XX_EthC_BASE_VIRT (IXP4XX_PERIPHERAL_BASE_VIRT + 0xA000) +#define IXP4XX_USB_BASE_VIRT (IXP4XX_PERIPHERAL_BASE_VIRT + 0xB000) +/* ixp46X only */ +#define IXP4XX_EthA_BASE_VIRT (IXP4XX_PERIPHERAL_BASE_VIRT + 0xC000) +#define IXP4XX_EthB1_BASE_VIRT (IXP4XX_PERIPHERAL_BASE_VIRT + 0xD000) +#define IXP4XX_EthB2_BASE_VIRT (IXP4XX_PERIPHERAL_BASE_VIRT + 0xE000) +#define IXP4XX_EthB3_BASE_VIRT (IXP4XX_PERIPHERAL_BASE_VIRT + 0xF000) +#define IXP4XX_TIMESYNC_BASE_VIRT (IXP4XX_PERIPHERAL_BASE_VIRT + 0x10000) +#define IXP4XX_I2C_BASE_VIRT (IXP4XX_PERIPHERAL_BASE_VIRT + 0x11000) +#define IXP4XX_SSP_BASE_VIRT (IXP4XX_PERIPHERAL_BASE_VIRT + 0x12000) + +/* + * Constants to make it easy to access Interrupt Controller registers + */ +#define IXP4XX_ICPR_OFFSET 0x00 /* Interrupt Status */ +#define IXP4XX_ICMR_OFFSET 0x04 /* Interrupt Enable */ +#define IXP4XX_ICLR_OFFSET 0x08 /* Interrupt IRQ/FIQ Select */ +#define IXP4XX_ICIP_OFFSET 0x0C /* IRQ Status */ +#define IXP4XX_ICFP_OFFSET 0x10 /* FIQ Status */ +#define IXP4XX_ICHR_OFFSET 0x14 /* Interrupt Priority */ +#define IXP4XX_ICIH_OFFSET 0x18 /* IRQ Highest Pri Int */ +#define IXP4XX_ICFH_OFFSET 0x1C /* FIQ Highest Pri Int */ + +/* + * IXP465-only + */ +#define IXP4XX_ICPR2_OFFSET 0x20 /* Interrupt Status 2 */ +#define IXP4XX_ICMR2_OFFSET 0x24 /* Interrupt Enable 2 */ +#define IXP4XX_ICLR2_OFFSET 0x28 /* Interrupt IRQ/FIQ Select 2 */ +#define IXP4XX_ICIP2_OFFSET 0x2C /* IRQ Status */ +#define IXP4XX_ICFP2_OFFSET 0x30 /* FIQ Status */ +#define IXP4XX_ICEEN_OFFSET 0x34 /* Error High Pri Enable */ + + +/* + * Interrupt Controller Register Definitions. + */ + +#define IXP4XX_INTC_REG(x) ((volatile u32 *)(IXP4XX_INTC_BASE_VIRT+(x))) + +#define IXP4XX_ICPR IXP4XX_INTC_REG(IXP4XX_ICPR_OFFSET) +#define IXP4XX_ICMR IXP4XX_INTC_REG(IXP4XX_ICMR_OFFSET) +#define IXP4XX_ICLR IXP4XX_INTC_REG(IXP4XX_ICLR_OFFSET) +#define IXP4XX_ICIP IXP4XX_INTC_REG(IXP4XX_ICIP_OFFSET) +#define IXP4XX_ICFP IXP4XX_INTC_REG(IXP4XX_ICFP_OFFSET) +#define IXP4XX_ICHR IXP4XX_INTC_REG(IXP4XX_ICHR_OFFSET) +#define IXP4XX_ICIH IXP4XX_INTC_REG(IXP4XX_ICIH_OFFSET) +#define IXP4XX_ICFH IXP4XX_INTC_REG(IXP4XX_ICFH_OFFSET) +#define IXP4XX_ICPR2 IXP4XX_INTC_REG(IXP4XX_ICPR2_OFFSET) +#define IXP4XX_ICMR2 IXP4XX_INTC_REG(IXP4XX_ICMR2_OFFSET) +#define IXP4XX_ICLR2 IXP4XX_INTC_REG(IXP4XX_ICLR2_OFFSET) +#define IXP4XX_ICIP2 IXP4XX_INTC_REG(IXP4XX_ICIP2_OFFSET) +#define IXP4XX_ICFP2 IXP4XX_INTC_REG(IXP4XX_ICFP2_OFFSET) +#define IXP4XX_ICEEN IXP4XX_INTC_REG(IXP4XX_ICEEN_OFFSET) + +/* + * Constants to make it easy to access GPIO registers + */ +#define IXP4XX_GPIO_GPOUTR_OFFSET 0x00 +#define IXP4XX_GPIO_GPOER_OFFSET 0x04 +#define IXP4XX_GPIO_GPINR_OFFSET 0x08 +#define IXP4XX_GPIO_GPISR_OFFSET 0x0C +#define IXP4XX_GPIO_GPIT1R_OFFSET 0x10 +#define IXP4XX_GPIO_GPIT2R_OFFSET 0x14 +#define IXP4XX_GPIO_GPCLKR_OFFSET 0x18 +#define IXP4XX_GPIO_GPDBSELR_OFFSET 0x1C + +/* + * GPIO Register Definitions. + * [Only perform 32bit reads/writes] + */ +#define IXP4XX_GPIO_REG(x) ((volatile u32 *)(IXP4XX_GPIO_BASE_VIRT+(x))) + +#define IXP4XX_GPIO_GPOUTR IXP4XX_GPIO_REG(IXP4XX_GPIO_GPOUTR_OFFSET) +#define IXP4XX_GPIO_GPOER IXP4XX_GPIO_REG(IXP4XX_GPIO_GPOER_OFFSET) +#define IXP4XX_GPIO_GPINR IXP4XX_GPIO_REG(IXP4XX_GPIO_GPINR_OFFSET) +#define IXP4XX_GPIO_GPISR IXP4XX_GPIO_REG(IXP4XX_GPIO_GPISR_OFFSET) +#define IXP4XX_GPIO_GPIT1R IXP4XX_GPIO_REG(IXP4XX_GPIO_GPIT1R_OFFSET) +#define IXP4XX_GPIO_GPIT2R IXP4XX_GPIO_REG(IXP4XX_GPIO_GPIT2R_OFFSET) +#define IXP4XX_GPIO_GPCLKR IXP4XX_GPIO_REG(IXP4XX_GPIO_GPCLKR_OFFSET) +#define IXP4XX_GPIO_GPDBSELR IXP4XX_GPIO_REG(IXP4XX_GPIO_GPDBSELR_OFFSET) + +/* + * GPIO register bit definitions + */ + +/* Interrupt styles + */ +#define IXP4XX_GPIO_STYLE_ACTIVE_HIGH 0x0 +#define IXP4XX_GPIO_STYLE_ACTIVE_LOW 0x1 +#define IXP4XX_GPIO_STYLE_RISING_EDGE 0x2 +#define IXP4XX_GPIO_STYLE_FALLING_EDGE 0x3 +#define IXP4XX_GPIO_STYLE_TRANSITIONAL 0x4 + +/* + * Mask used to clear interrupt styles + */ +#define IXP4XX_GPIO_STYLE_CLEAR 0x7 +#define IXP4XX_GPIO_STYLE_SIZE 3 + +/* + * Constants to make it easy to access Timer Control/Status registers + */ +#define IXP4XX_OSTS_OFFSET 0x00 /* Continious TimeStamp */ +#define IXP4XX_OST1_OFFSET 0x04 /* Timer 1 Timestamp */ +#define IXP4XX_OSRT1_OFFSET 0x08 /* Timer 1 Reload */ +#define IXP4XX_OST2_OFFSET 0x0C /* Timer 2 Timestamp */ +#define IXP4XX_OSRT2_OFFSET 0x10 /* Timer 2 Reload */ +#define IXP4XX_OSWT_OFFSET 0x14 /* Watchdog Timer */ +#define IXP4XX_OSWE_OFFSET 0x18 /* Watchdog Enable */ +#define IXP4XX_OSWK_OFFSET 0x1C /* Watchdog Key */ +#define IXP4XX_OSST_OFFSET 0x20 /* Timer Status */ + +/* + * Operating System Timer Register Definitions. + */ + +#define IXP4XX_TIMER_REG(x) ((volatile u32 *)(IXP4XX_TIMER_BASE_VIRT+(x))) + +#define IXP4XX_OSTS IXP4XX_TIMER_REG(IXP4XX_OSTS_OFFSET) +#define IXP4XX_OST1 IXP4XX_TIMER_REG(IXP4XX_OST1_OFFSET) +#define IXP4XX_OSRT1 IXP4XX_TIMER_REG(IXP4XX_OSRT1_OFFSET) +#define IXP4XX_OST2 IXP4XX_TIMER_REG(IXP4XX_OST2_OFFSET) +#define IXP4XX_OSRT2 IXP4XX_TIMER_REG(IXP4XX_OSRT2_OFFSET) +#define IXP4XX_OSWT IXP4XX_TIMER_REG(IXP4XX_OSWT_OFFSET) +#define IXP4XX_OSWE IXP4XX_TIMER_REG(IXP4XX_OSWE_OFFSET) +#define IXP4XX_OSWK IXP4XX_TIMER_REG(IXP4XX_OSWK_OFFSET) +#define IXP4XX_OSST IXP4XX_TIMER_REG(IXP4XX_OSST_OFFSET) + +/* + * Timer register values and bit definitions + */ +#define IXP4XX_OST_ENABLE 0x00000001 +#define IXP4XX_OST_ONE_SHOT 0x00000002 +/* Low order bits of reload value ignored */ +#define IXP4XX_OST_RELOAD_MASK 0x00000003 +#define IXP4XX_OST_DISABLED 0x00000000 +#define IXP4XX_OSST_TIMER_1_PEND 0x00000001 +#define IXP4XX_OSST_TIMER_2_PEND 0x00000002 +#define IXP4XX_OSST_TIMER_TS_PEND 0x00000004 +#define IXP4XX_OSST_TIMER_WDOG_PEND 0x00000008 +#define IXP4XX_OSST_TIMER_WARM_RESET 0x00000010 + +#define IXP4XX_WDT_KEY 0x0000482E + +#define IXP4XX_WDT_RESET_ENABLE 0x00000001 +#define IXP4XX_WDT_IRQ_ENABLE 0x00000002 +#define IXP4XX_WDT_COUNT_ENABLE 0x00000004 + + +/* + * Constants to make it easy to access PCI Control/Status registers + */ +#define PCI_NP_AD_OFFSET 0x00 +#define PCI_NP_CBE_OFFSET 0x04 +#define PCI_NP_WDATA_OFFSET 0x08 +#define PCI_NP_RDATA_OFFSET 0x0c +#define PCI_CRP_AD_CBE_OFFSET 0x10 +#define PCI_CRP_WDATA_OFFSET 0x14 +#define PCI_CRP_RDATA_OFFSET 0x18 +#define PCI_CSR_OFFSET 0x1c +#define PCI_ISR_OFFSET 0x20 +#define PCI_INTEN_OFFSET 0x24 +#define PCI_DMACTRL_OFFSET 0x28 +#define PCI_AHBMEMBASE_OFFSET 0x2c +#define PCI_AHBIOBASE_OFFSET 0x30 +#define PCI_PCIMEMBASE_OFFSET 0x34 +#define PCI_AHBDOORBELL_OFFSET 0x38 +#define PCI_PCIDOORBELL_OFFSET 0x3C +#define PCI_ATPDMA0_AHBADDR_OFFSET 0x40 +#define PCI_ATPDMA0_PCIADDR_OFFSET 0x44 +#define PCI_ATPDMA0_LENADDR_OFFSET 0x48 +#define PCI_ATPDMA1_AHBADDR_OFFSET 0x4C +#define PCI_ATPDMA1_PCIADDR_OFFSET 0x50 +#define PCI_ATPDMA1_LENADDR_OFFSET 0x54 + +/* + * PCI Control/Status Registers + */ +#define IXP4XX_PCI_CSR(x) ((volatile u32 *)(IXP4XX_PCI_CFG_BASE_VIRT+(x))) + +#define PCI_NP_AD IXP4XX_PCI_CSR(PCI_NP_AD_OFFSET) +#define PCI_NP_CBE IXP4XX_PCI_CSR(PCI_NP_CBE_OFFSET) +#define PCI_NP_WDATA IXP4XX_PCI_CSR(PCI_NP_WDATA_OFFSET) +#define PCI_NP_RDATA IXP4XX_PCI_CSR(PCI_NP_RDATA_OFFSET) +#define PCI_CRP_AD_CBE IXP4XX_PCI_CSR(PCI_CRP_AD_CBE_OFFSET) +#define PCI_CRP_WDATA IXP4XX_PCI_CSR(PCI_CRP_WDATA_OFFSET) +#define PCI_CRP_RDATA IXP4XX_PCI_CSR(PCI_CRP_RDATA_OFFSET) +#define PCI_CSR IXP4XX_PCI_CSR(PCI_CSR_OFFSET) +#define PCI_ISR IXP4XX_PCI_CSR(PCI_ISR_OFFSET) +#define PCI_INTEN IXP4XX_PCI_CSR(PCI_INTEN_OFFSET) +#define PCI_DMACTRL IXP4XX_PCI_CSR(PCI_DMACTRL_OFFSET) +#define PCI_AHBMEMBASE IXP4XX_PCI_CSR(PCI_AHBMEMBASE_OFFSET) +#define PCI_AHBIOBASE IXP4XX_PCI_CSR(PCI_AHBIOBASE_OFFSET) +#define PCI_PCIMEMBASE IXP4XX_PCI_CSR(PCI_PCIMEMBASE_OFFSET) +#define PCI_AHBDOORBELL IXP4XX_PCI_CSR(PCI_AHBDOORBELL_OFFSET) +#define PCI_PCIDOORBELL IXP4XX_PCI_CSR(PCI_PCIDOORBELL_OFFSET) +#define PCI_ATPDMA0_AHBADDR IXP4XX_PCI_CSR(PCI_ATPDMA0_AHBADDR_OFFSET) +#define PCI_ATPDMA0_PCIADDR IXP4XX_PCI_CSR(PCI_ATPDMA0_PCIADDR_OFFSET) +#define PCI_ATPDMA0_LENADDR IXP4XX_PCI_CSR(PCI_ATPDMA0_LENADDR_OFFSET) +#define PCI_ATPDMA1_AHBADDR IXP4XX_PCI_CSR(PCI_ATPDMA1_AHBADDR_OFFSET) +#define PCI_ATPDMA1_PCIADDR IXP4XX_PCI_CSR(PCI_ATPDMA1_PCIADDR_OFFSET) +#define PCI_ATPDMA1_LENADDR IXP4XX_PCI_CSR(PCI_ATPDMA1_LENADDR_OFFSET) + +/* + * PCI register values and bit definitions + */ + +/* CSR bit definitions */ +#define PCI_CSR_HOST 0x00000001 +#define PCI_CSR_ARBEN 0x00000002 +#define PCI_CSR_ADS 0x00000004 +#define PCI_CSR_PDS 0x00000008 +#define PCI_CSR_ABE 0x00000010 +#define PCI_CSR_DBT 0x00000020 +#define PCI_CSR_ASE 0x00000100 +#define PCI_CSR_IC 0x00008000 + +/* ISR (Interrupt status) Register bit definitions */ +#define PCI_ISR_PSE 0x00000001 +#define PCI_ISR_PFE 0x00000002 +#define PCI_ISR_PPE 0x00000004 +#define PCI_ISR_AHBE 0x00000008 +#define PCI_ISR_APDC 0x00000010 +#define PCI_ISR_PADC 0x00000020 +#define PCI_ISR_ADB 0x00000040 +#define PCI_ISR_PDB 0x00000080 + +/* INTEN (Interrupt Enable) Register bit definitions */ +#define PCI_INTEN_PSE 0x00000001 +#define PCI_INTEN_PFE 0x00000002 +#define PCI_INTEN_PPE 0x00000004 +#define PCI_INTEN_AHBE 0x00000008 +#define PCI_INTEN_APDC 0x00000010 +#define PCI_INTEN_PADC 0x00000020 +#define PCI_INTEN_ADB 0x00000040 +#define PCI_INTEN_PDB 0x00000080 + +/* + * Shift value for byte enable on NP cmd/byte enable register + */ +#define IXP4XX_PCI_NP_CBE_BESL 4 + +/* + * PCI commands supported by NP access unit + */ +#define NP_CMD_IOREAD 0x2 +#define NP_CMD_IOWRITE 0x3 +#define NP_CMD_CONFIGREAD 0xa +#define NP_CMD_CONFIGWRITE 0xb +#define NP_CMD_MEMREAD 0x6 +#define NP_CMD_MEMWRITE 0x7 + +/* + * Constants for CRP access into local config space + */ +#define CRP_AD_CBE_BESL 20 +#define CRP_AD_CBE_WRITE 0x00010000 + + +/* + * USB Device Controller + * + * These are used by the USB gadget driver, so they don't follow the + * IXP4XX_ naming convetions. + * + */ +# define IXP4XX_USB_REG(x) (*((volatile u32 *)(x))) + +/* UDC Undocumented - Reserved1 */ +#define UDC_RES1 IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0004) +/* UDC Undocumented - Reserved2 */ +#define UDC_RES2 IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0008) +/* UDC Undocumented - Reserved3 */ +#define UDC_RES3 IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x000C) +/* UDC Control Register */ +#define UDCCR IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0000) +/* UDC Endpoint 0 Control/Status Register */ +#define UDCCS0 IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0010) +/* UDC Endpoint 1 (IN) Control/Status Register */ +#define UDCCS1 IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0014) +/* UDC Endpoint 2 (OUT) Control/Status Register */ +#define UDCCS2 IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0018) +/* UDC Endpoint 3 (IN) Control/Status Register */ +#define UDCCS3 IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x001C) +/* UDC Endpoint 4 (OUT) Control/Status Register */ +#define UDCCS4 IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0020) +/* UDC Endpoint 5 (Interrupt) Control/Status Register */ +#define UDCCS5 IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0024) +/* UDC Endpoint 6 (IN) Control/Status Register */ +#define UDCCS6 IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0028) +/* UDC Endpoint 7 (OUT) Control/Status Register */ +#define UDCCS7 IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x002C) +/* UDC Endpoint 8 (IN) Control/Status Register */ +#define UDCCS8 IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0030) +/* UDC Endpoint 9 (OUT) Control/Status Register */ +#define UDCCS9 IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0034) +/* UDC Endpoint 10 (Interrupt) Control/Status Register */ +#define UDCCS10 IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0038) +/* UDC Endpoint 11 (IN) Control/Status Register */ +#define UDCCS11 IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x003C) +/* UDC Endpoint 12 (OUT) Control/Status Register */ +#define UDCCS12 IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0040) +/* UDC Endpoint 13 (IN) Control/Status Register */ +#define UDCCS13 IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0044) +/* UDC Endpoint 14 (OUT) Control/Status Register */ +#define UDCCS14 IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0048) +/* UDC Endpoint 15 (Interrupt) Control/Status Register */ +#define UDCCS15 IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x004C) +/* UDC Frame Number Register High */ +#define UFNRH IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0060) +/* UDC Frame Number Register Low */ +#define UFNRL IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0064) +/* UDC Byte Count Reg 2 */ +#define UBCR2 IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0068) +/* UDC Byte Count Reg 4 */ +#define UBCR4 IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x006c) +/* UDC Byte Count Reg 7 */ +#define UBCR7 IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0070) +/* UDC Byte Count Reg 9 */ +#define UBCR9 IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0074) +/* UDC Byte Count Reg 12 */ +#define UBCR12 IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0078) +/* UDC Byte Count Reg 14 */ +#define UBCR14 IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x007c) +/* UDC Endpoint 0 Data Register */ +#define UDDR0 IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0080) +/* UDC Endpoint 1 Data Register */ +#define UDDR1 IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0100) +/* UDC Endpoint 2 Data Register */ +#define UDDR2 IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0180) +/* UDC Endpoint 3 Data Register */ +#define UDDR3 IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0200) +/* UDC Endpoint 4 Data Register */ +#define UDDR4 IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0400) +/* UDC Endpoint 5 Data Register */ +#define UDDR5 IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x00A0) +/* UDC Endpoint 6 Data Register */ +#define UDDR6 IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0600) +/* UDC Endpoint 7 Data Register */ +#define UDDR7 IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0680) +/* UDC Endpoint 8 Data Register */ +#define UDDR8 IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0700) +/* UDC Endpoint 9 Data Register */ +#define UDDR9 IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0900) +/* UDC Endpoint 10 Data Register */ +#define UDDR10 IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x00C0) +/* UDC Endpoint 11 Data Register */ +#define UDDR11 IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0B00) +/* UDC Endpoint 12 Data Register */ +#define UDDR12 IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0B80) +/* UDC Endpoint 13 Data Register */ +#define UDDR13 IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0C00) +/* UDC Endpoint 14 Data Register */ +#define UDDR14 IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0E00) +/* UDC Endpoint 15 Data Register */ +#define UDDR15 IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x00E0) +/* UDC Interrupt Control Register 0 */ +#define UICR0 IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0050) +/* UDC Interrupt Control Register 1 */ +#define UICR1 IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0054) +/* UDC Status Interrupt Register 0 */ +#define USIR0 IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0058) +/* UDC Status Interrupt Register 1 */ +#define USIR1 IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x005C) + +#define UDCCR_UDE (1 << 0) /* UDC enable */ +#define UDCCR_UDA (1 << 1) /* UDC active */ +#define UDCCR_RSM (1 << 2) /* Device resume */ +#define UDCCR_RESIR (1 << 3) /* Resume interrupt request */ +#define UDCCR_SUSIR (1 << 4) /* Suspend interrupt request */ +#define UDCCR_SRM (1 << 5) /* Suspend/resume interrupt mask */ +#define UDCCR_RSTIR (1 << 6) /* Reset interrupt request */ +#define UDCCR_REM (1 << 7) /* Reset interrupt mask */ + +#define UDCCS0_OPR (1 << 0) /* OUT packet ready */ +#define UDCCS0_IPR (1 << 1) /* IN packet ready */ +#define UDCCS0_FTF (1 << 2) /* Flush Tx FIFO */ +#define UDCCS0_DRWF (1 << 3) /* Device remote wakeup feature */ +#define UDCCS0_SST (1 << 4) /* Sent stall */ +#define UDCCS0_FST (1 << 5) /* Force stall */ +#define UDCCS0_RNE (1 << 6) /* Receive FIFO no empty */ +#define UDCCS0_SA (1 << 7) /* Setup active */ + +#define UDCCS_BI_TFS (1 << 0) /* Transmit FIFO service */ +#define UDCCS_BI_TPC (1 << 1) /* Transmit packet complete */ +#define UDCCS_BI_FTF (1 << 2) /* Flush Tx FIFO */ +#define UDCCS_BI_TUR (1 << 3) /* Transmit FIFO underrun */ +#define UDCCS_BI_SST (1 << 4) /* Sent stall */ +#define UDCCS_BI_FST (1 << 5) /* Force stall */ +#define UDCCS_BI_TSP (1 << 7) /* Transmit short packet */ + +#define UDCCS_BO_RFS (1 << 0) /* Receive FIFO service */ +#define UDCCS_BO_RPC (1 << 1) /* Receive packet complete */ +#define UDCCS_BO_DME (1 << 3) /* DMA enable */ +#define UDCCS_BO_SST (1 << 4) /* Sent stall */ +#define UDCCS_BO_FST (1 << 5) /* Force stall */ +#define UDCCS_BO_RNE (1 << 6) /* Receive FIFO not empty */ +#define UDCCS_BO_RSP (1 << 7) /* Receive short packet */ + +#define UDCCS_II_TFS (1 << 0) /* Transmit FIFO service */ +#define UDCCS_II_TPC (1 << 1) /* Transmit packet complete */ +#define UDCCS_II_FTF (1 << 2) /* Flush Tx FIFO */ +#define UDCCS_II_TUR (1 << 3) /* Transmit FIFO underrun */ +#define UDCCS_II_TSP (1 << 7) /* Transmit short packet */ + +#define UDCCS_IO_RFS (1 << 0) /* Receive FIFO service */ +#define UDCCS_IO_RPC (1 << 1) /* Receive packet complete */ +#define UDCCS_IO_ROF (1 << 3) /* Receive overflow */ +#define UDCCS_IO_DME (1 << 3) /* DMA enable */ +#define UDCCS_IO_RNE (1 << 6) /* Receive FIFO not empty */ +#define UDCCS_IO_RSP (1 << 7) /* Receive short packet */ + +#define UDCCS_INT_TFS (1 << 0) /* Transmit FIFO service */ +#define UDCCS_INT_TPC (1 << 1) /* Transmit packet complete */ +#define UDCCS_INT_FTF (1 << 2) /* Flush Tx FIFO */ +#define UDCCS_INT_TUR (1 << 3) /* Transmit FIFO underrun */ +#define UDCCS_INT_SST (1 << 4) /* Sent stall */ +#define UDCCS_INT_FST (1 << 5) /* Force stall */ +#define UDCCS_INT_TSP (1 << 7) /* Transmit short packet */ + +#define UICR0_IM0 (1 << 0) /* Interrupt mask ep 0 */ +#define UICR0_IM1 (1 << 1) /* Interrupt mask ep 1 */ +#define UICR0_IM2 (1 << 2) /* Interrupt mask ep 2 */ +#define UICR0_IM3 (1 << 3) /* Interrupt mask ep 3 */ +#define UICR0_IM4 (1 << 4) /* Interrupt mask ep 4 */ +#define UICR0_IM5 (1 << 5) /* Interrupt mask ep 5 */ +#define UICR0_IM6 (1 << 6) /* Interrupt mask ep 6 */ +#define UICR0_IM7 (1 << 7) /* Interrupt mask ep 7 */ + +#define UICR1_IM8 (1 << 0) /* Interrupt mask ep 8 */ +#define UICR1_IM9 (1 << 1) /* Interrupt mask ep 9 */ +#define UICR1_IM10 (1 << 2) /* Interrupt mask ep 10 */ +#define UICR1_IM11 (1 << 3) /* Interrupt mask ep 11 */ +#define UICR1_IM12 (1 << 4) /* Interrupt mask ep 12 */ +#define UICR1_IM13 (1 << 5) /* Interrupt mask ep 13 */ +#define UICR1_IM14 (1 << 6) /* Interrupt mask ep 14 */ +#define UICR1_IM15 (1 << 7) /* Interrupt mask ep 15 */ + +#define USIR0_IR0 (1 << 0) /* Interrupt request ep 0 */ +#define USIR0_IR1 (1 << 1) /* Interrupt request ep 1 */ +#define USIR0_IR2 (1 << 2) /* Interrupt request ep 2 */ +#define USIR0_IR3 (1 << 3) /* Interrupt request ep 3 */ +#define USIR0_IR4 (1 << 4) /* Interrupt request ep 4 */ +#define USIR0_IR5 (1 << 5) /* Interrupt request ep 5 */ +#define USIR0_IR6 (1 << 6) /* Interrupt request ep 6 */ +#define USIR0_IR7 (1 << 7) /* Interrupt request ep 7 */ + +#define USIR1_IR8 (1 << 0) /* Interrupt request ep 8 */ +#define USIR1_IR9 (1 << 1) /* Interrupt request ep 9 */ +#define USIR1_IR10 (1 << 2) /* Interrupt request ep 10 */ +#define USIR1_IR11 (1 << 3) /* Interrupt request ep 11 */ +#define USIR1_IR12 (1 << 4) /* Interrupt request ep 12 */ +#define USIR1_IR13 (1 << 5) /* Interrupt request ep 13 */ +#define USIR1_IR14 (1 << 6) /* Interrupt request ep 14 */ +#define USIR1_IR15 (1 << 7) /* Interrupt request ep 15 */ + +#define DCMD_LENGTH 0x01fff /* length mask (max = 8K - 1) */ + +/* "fuse" bits of IXP_EXP_CFG2 */ +/* All IXP4xx CPUs */ +#define IXP4XX_FEATURE_RCOMP (1 << 0) +#define IXP4XX_FEATURE_USB_DEVICE (1 << 1) +#define IXP4XX_FEATURE_HASH (1 << 2) +#define IXP4XX_FEATURE_AES (1 << 3) +#define IXP4XX_FEATURE_DES (1 << 4) +#define IXP4XX_FEATURE_HDLC (1 << 5) +#define IXP4XX_FEATURE_AAL (1 << 6) +#define IXP4XX_FEATURE_HSS (1 << 7) +#define IXP4XX_FEATURE_UTOPIA (1 << 8) +#define IXP4XX_FEATURE_NPEB_ETH0 (1 << 9) +#define IXP4XX_FEATURE_NPEC_ETH (1 << 10) +#define IXP4XX_FEATURE_RESET_NPEA (1 << 11) +#define IXP4XX_FEATURE_RESET_NPEB (1 << 12) +#define IXP4XX_FEATURE_RESET_NPEC (1 << 13) +#define IXP4XX_FEATURE_PCI (1 << 14) +#define IXP4XX_FEATURE_UTOPIA_PHY_LIMIT (3 << 16) +#define IXP4XX_FEATURE_XSCALE_MAX_FREQ (3 << 22) +#define IXP42X_FEATURE_MASK (IXP4XX_FEATURE_RCOMP | \ + IXP4XX_FEATURE_USB_DEVICE | \ + IXP4XX_FEATURE_HASH | \ + IXP4XX_FEATURE_AES | \ + IXP4XX_FEATURE_DES | \ + IXP4XX_FEATURE_HDLC | \ + IXP4XX_FEATURE_AAL | \ + IXP4XX_FEATURE_HSS | \ + IXP4XX_FEATURE_UTOPIA | \ + IXP4XX_FEATURE_NPEB_ETH0 | \ + IXP4XX_FEATURE_NPEC_ETH | \ + IXP4XX_FEATURE_RESET_NPEA | \ + IXP4XX_FEATURE_RESET_NPEB | \ + IXP4XX_FEATURE_RESET_NPEC | \ + IXP4XX_FEATURE_PCI | \ + IXP4XX_FEATURE_UTOPIA_PHY_LIMIT | \ + IXP4XX_FEATURE_XSCALE_MAX_FREQ) + + +/* IXP43x/46x CPUs */ +#define IXP4XX_FEATURE_ECC_TIMESYNC (1 << 15) +#define IXP4XX_FEATURE_USB_HOST (1 << 18) +#define IXP4XX_FEATURE_NPEA_ETH (1 << 19) +#define IXP43X_FEATURE_MASK (IXP42X_FEATURE_MASK | \ + IXP4XX_FEATURE_ECC_TIMESYNC | \ + IXP4XX_FEATURE_USB_HOST | \ + IXP4XX_FEATURE_NPEA_ETH) + +/* IXP46x CPU (including IXP455) only */ +#define IXP4XX_FEATURE_NPEB_ETH_1_TO_3 (1 << 20) +#define IXP4XX_FEATURE_RSA (1 << 21) +#define IXP46X_FEATURE_MASK (IXP43X_FEATURE_MASK | \ + IXP4XX_FEATURE_NPEB_ETH_1_TO_3 | \ + IXP4XX_FEATURE_RSA) + +#endif diff --git a/kernel/arch/arm/mach-ixp4xx/include/mach/npe.h b/kernel/arch/arm/mach-ixp4xx/include/mach/npe.h new file mode 100644 index 000000000..e320db245 --- /dev/null +++ b/kernel/arch/arm/mach-ixp4xx/include/mach/npe.h @@ -0,0 +1,39 @@ +#ifndef __IXP4XX_NPE_H +#define __IXP4XX_NPE_H + +#include <linux/kernel.h> + +extern const char *npe_names[]; + +struct npe_regs { + u32 exec_addr, exec_data, exec_status_cmd, exec_count; + u32 action_points[4]; + u32 watchpoint_fifo, watch_count; + u32 profile_count; + u32 messaging_status, messaging_control; + u32 mailbox_status, /*messaging_*/ in_out_fifo; +}; + +struct npe { + struct resource *mem_res; + struct npe_regs __iomem *regs; + u32 regs_phys; + int id; + int valid; +}; + + +static inline const char *npe_name(struct npe *npe) +{ + return npe_names[npe->id]; +} + +int npe_running(struct npe *npe); +int npe_send_message(struct npe *npe, const void *msg, const char *what); +int npe_recv_message(struct npe *npe, void *msg, const char *what); +int npe_send_recv_message(struct npe *npe, void *msg, const char *what); +int npe_load_firmware(struct npe *npe, const char *name, struct device *dev); +struct npe *npe_request(unsigned id); +void npe_release(struct npe *npe); + +#endif /* __IXP4XX_NPE_H */ diff --git a/kernel/arch/arm/mach-ixp4xx/include/mach/platform.h b/kernel/arch/arm/mach-ixp4xx/include/mach/platform.h new file mode 100644 index 000000000..75c4c6572 --- /dev/null +++ b/kernel/arch/arm/mach-ixp4xx/include/mach/platform.h @@ -0,0 +1,135 @@ +/* + * arch/arm/mach-ixp4xx/include/mach/platform.h + * + * Constants and functions that are useful to IXP4xx platform-specific code + * and device drivers. + * + * Copyright (C) 2004 MontaVista Software, Inc. + */ + +#ifndef __ASM_ARCH_HARDWARE_H__ +#error "Do not include this directly, instead #include <mach/hardware.h>" +#endif + +#ifndef __ASSEMBLY__ + +#include <linux/reboot.h> + +#include <asm/types.h> + +#ifndef __ARMEB__ +#define REG_OFFSET 0 +#else +#define REG_OFFSET 3 +#endif + +/* + * Expansion bus memory regions + */ +#define IXP4XX_EXP_BUS_BASE_PHYS (0x50000000) + +/* + * The expansion bus on the IXP4xx can be configured for either 16 or + * 32MB windows and the CS offset for each region changes based on the + * current configuration. This means that we cannot simply hardcode + * each offset. ixp4xx_sys_init() looks at the expansion bus configuration + * as setup by the bootloader to determine our window size. + */ +extern unsigned long ixp4xx_exp_bus_size; + +#define IXP4XX_EXP_BUS_BASE(region)\ + (IXP4XX_EXP_BUS_BASE_PHYS + ((region) * ixp4xx_exp_bus_size)) + +#define IXP4XX_EXP_BUS_END(region)\ + (IXP4XX_EXP_BUS_BASE(region) + ixp4xx_exp_bus_size - 1) + +/* Those macros can be used to adjust timing and configure + * other features for each region. + */ + +#define IXP4XX_EXP_BUS_RECOVERY_T(x) (((x) & 0x0f) << 16) +#define IXP4XX_EXP_BUS_HOLD_T(x) (((x) & 0x03) << 20) +#define IXP4XX_EXP_BUS_STROBE_T(x) (((x) & 0x0f) << 22) +#define IXP4XX_EXP_BUS_SETUP_T(x) (((x) & 0x03) << 26) +#define IXP4XX_EXP_BUS_ADDR_T(x) (((x) & 0x03) << 28) +#define IXP4XX_EXP_BUS_SIZE(x) (((x) & 0x0f) << 10) +#define IXP4XX_EXP_BUS_CYCLES(x) (((x) & 0x03) << 14) + +#define IXP4XX_EXP_BUS_CS_EN (1L << 31) +#define IXP4XX_EXP_BUS_BYTE_RD16 (1L << 6) +#define IXP4XX_EXP_BUS_HRDY_POL (1L << 5) +#define IXP4XX_EXP_BUS_MUX_EN (1L << 4) +#define IXP4XX_EXP_BUS_SPLT_EN (1L << 3) +#define IXP4XX_EXP_BUS_WR_EN (1L << 1) +#define IXP4XX_EXP_BUS_BYTE_EN (1L << 0) + +#define IXP4XX_EXP_BUS_CYCLES_INTEL 0x00 +#define IXP4XX_EXP_BUS_CYCLES_MOTOROLA 0x01 +#define IXP4XX_EXP_BUS_CYCLES_HPI 0x02 + +#define IXP4XX_FLASH_WRITABLE (0x2) +#define IXP4XX_FLASH_DEFAULT (0xbcd23c40) +#define IXP4XX_FLASH_WRITE (0xbcd23c42) + +/* + * Clock Speed Definitions. + */ +#define IXP4XX_PERIPHERAL_BUS_CLOCK (66) /* 66Mhzi APB BUS */ +#define IXP4XX_UART_XTAL 14745600 + +/* + * This structure provide a means for the board setup code + * to give information to th pata_ixp4xx driver. It is + * passed as platform_data. + */ +struct ixp4xx_pata_data { + volatile u32 *cs0_cfg; + volatile u32 *cs1_cfg; + unsigned long cs0_bits; + unsigned long cs1_bits; + void __iomem *cs0; + void __iomem *cs1; +}; + +#define IXP4XX_ETH_NPEA 0x00 +#define IXP4XX_ETH_NPEB 0x10 +#define IXP4XX_ETH_NPEC 0x20 + +/* Information about built-in Ethernet MAC interfaces */ +struct eth_plat_info { + u8 phy; /* MII PHY ID, 0 - 31 */ + u8 rxq; /* configurable, currently 0 - 31 only */ + u8 txreadyq; + u8 hwaddr[6]; +}; + +/* Information about built-in HSS (synchronous serial) interfaces */ +struct hss_plat_info { + int (*set_clock)(int port, unsigned int clock_type); + int (*open)(int port, void *pdev, + void (*set_carrier_cb)(void *pdev, int carrier)); + void (*close)(int port, void *pdev); + u8 txreadyq; +}; + +/* + * Frequency of clock used for primary clocksource + */ +extern unsigned long ixp4xx_timer_freq; + +/* + * Functions used by platform-level setup code + */ +extern void ixp4xx_map_io(void); +extern void ixp4xx_init_early(void); +extern void ixp4xx_init_irq(void); +extern void ixp4xx_sys_init(void); +extern void ixp4xx_timer_init(void); +extern void ixp4xx_restart(enum reboot_mode, const char *); +extern void ixp4xx_pci_preinit(void); +struct pci_sys_data; +extern int ixp4xx_setup(int nr, struct pci_sys_data *sys); +extern struct pci_ops ixp4xx_ops; + +#endif // __ASSEMBLY__ + diff --git a/kernel/arch/arm/mach-ixp4xx/include/mach/qmgr.h b/kernel/arch/arm/mach-ixp4xx/include/mach/qmgr.h new file mode 100644 index 000000000..4de8da536 --- /dev/null +++ b/kernel/arch/arm/mach-ixp4xx/include/mach/qmgr.h @@ -0,0 +1,204 @@ +/* + * Copyright (C) 2007 Krzysztof Halasa <khc@pm.waw.pl> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of version 2 of the GNU General Public License + * as published by the Free Software Foundation. + */ + +#ifndef IXP4XX_QMGR_H +#define IXP4XX_QMGR_H + +#include <linux/io.h> +#include <linux/kernel.h> + +#define DEBUG_QMGR 0 + +#define HALF_QUEUES 32 +#define QUEUES 64 +#define MAX_QUEUE_LENGTH 4 /* in dwords */ + +#define QUEUE_STAT1_EMPTY 1 /* queue status bits */ +#define QUEUE_STAT1_NEARLY_EMPTY 2 +#define QUEUE_STAT1_NEARLY_FULL 4 +#define QUEUE_STAT1_FULL 8 +#define QUEUE_STAT2_UNDERFLOW 1 +#define QUEUE_STAT2_OVERFLOW 2 + +#define QUEUE_WATERMARK_0_ENTRIES 0 +#define QUEUE_WATERMARK_1_ENTRY 1 +#define QUEUE_WATERMARK_2_ENTRIES 2 +#define QUEUE_WATERMARK_4_ENTRIES 3 +#define QUEUE_WATERMARK_8_ENTRIES 4 +#define QUEUE_WATERMARK_16_ENTRIES 5 +#define QUEUE_WATERMARK_32_ENTRIES 6 +#define QUEUE_WATERMARK_64_ENTRIES 7 + +/* queue interrupt request conditions */ +#define QUEUE_IRQ_SRC_EMPTY 0 +#define QUEUE_IRQ_SRC_NEARLY_EMPTY 1 +#define QUEUE_IRQ_SRC_NEARLY_FULL 2 +#define QUEUE_IRQ_SRC_FULL 3 +#define QUEUE_IRQ_SRC_NOT_EMPTY 4 +#define QUEUE_IRQ_SRC_NOT_NEARLY_EMPTY 5 +#define QUEUE_IRQ_SRC_NOT_NEARLY_FULL 6 +#define QUEUE_IRQ_SRC_NOT_FULL 7 + +struct qmgr_regs { + u32 acc[QUEUES][MAX_QUEUE_LENGTH]; /* 0x000 - 0x3FF */ + u32 stat1[4]; /* 0x400 - 0x40F */ + u32 stat2[2]; /* 0x410 - 0x417 */ + u32 statne_h; /* 0x418 - queue nearly empty */ + u32 statf_h; /* 0x41C - queue full */ + u32 irqsrc[4]; /* 0x420 - 0x42F IRC source */ + u32 irqen[2]; /* 0x430 - 0x437 IRQ enabled */ + u32 irqstat[2]; /* 0x438 - 0x43F - IRQ access only */ + u32 reserved[1776]; + u32 sram[2048]; /* 0x2000 - 0x3FFF - config and buffer */ +}; + +void qmgr_set_irq(unsigned int queue, int src, + void (*handler)(void *pdev), void *pdev); +void qmgr_enable_irq(unsigned int queue); +void qmgr_disable_irq(unsigned int queue); + +/* request_ and release_queue() must be called from non-IRQ context */ + +#if DEBUG_QMGR +extern char qmgr_queue_descs[QUEUES][32]; + +int qmgr_request_queue(unsigned int queue, unsigned int len /* dwords */, + unsigned int nearly_empty_watermark, + unsigned int nearly_full_watermark, + const char *desc_format, const char* name); +#else +int __qmgr_request_queue(unsigned int queue, unsigned int len /* dwords */, + unsigned int nearly_empty_watermark, + unsigned int nearly_full_watermark); +#define qmgr_request_queue(queue, len, nearly_empty_watermark, \ + nearly_full_watermark, desc_format, name) \ + __qmgr_request_queue(queue, len, nearly_empty_watermark, \ + nearly_full_watermark) +#endif + +void qmgr_release_queue(unsigned int queue); + + +static inline void qmgr_put_entry(unsigned int queue, u32 val) +{ + struct qmgr_regs __iomem *qmgr_regs = IXP4XX_QMGR_BASE_VIRT; +#if DEBUG_QMGR + BUG_ON(!qmgr_queue_descs[queue]); /* not yet requested */ + + printk(KERN_DEBUG "Queue %s(%i) put %X\n", + qmgr_queue_descs[queue], queue, val); +#endif + __raw_writel(val, &qmgr_regs->acc[queue][0]); +} + +static inline u32 qmgr_get_entry(unsigned int queue) +{ + u32 val; + const struct qmgr_regs __iomem *qmgr_regs = IXP4XX_QMGR_BASE_VIRT; + val = __raw_readl(&qmgr_regs->acc[queue][0]); +#if DEBUG_QMGR + BUG_ON(!qmgr_queue_descs[queue]); /* not yet requested */ + + printk(KERN_DEBUG "Queue %s(%i) get %X\n", + qmgr_queue_descs[queue], queue, val); +#endif + return val; +} + +static inline int __qmgr_get_stat1(unsigned int queue) +{ + const struct qmgr_regs __iomem *qmgr_regs = IXP4XX_QMGR_BASE_VIRT; + return (__raw_readl(&qmgr_regs->stat1[queue >> 3]) + >> ((queue & 7) << 2)) & 0xF; +} + +static inline int __qmgr_get_stat2(unsigned int queue) +{ + const struct qmgr_regs __iomem *qmgr_regs = IXP4XX_QMGR_BASE_VIRT; + BUG_ON(queue >= HALF_QUEUES); + return (__raw_readl(&qmgr_regs->stat2[queue >> 4]) + >> ((queue & 0xF) << 1)) & 0x3; +} + +/** + * qmgr_stat_empty() - checks if a hardware queue is empty + * @queue: queue number + * + * Returns non-zero value if the queue is empty. + */ +static inline int qmgr_stat_empty(unsigned int queue) +{ + BUG_ON(queue >= HALF_QUEUES); + return __qmgr_get_stat1(queue) & QUEUE_STAT1_EMPTY; +} + +/** + * qmgr_stat_below_low_watermark() - checks if a queue is below low watermark + * @queue: queue number + * + * Returns non-zero value if the queue is below low watermark. + */ +static inline int qmgr_stat_below_low_watermark(unsigned int queue) +{ + const struct qmgr_regs __iomem *qmgr_regs = IXP4XX_QMGR_BASE_VIRT; + if (queue >= HALF_QUEUES) + return (__raw_readl(&qmgr_regs->statne_h) >> + (queue - HALF_QUEUES)) & 0x01; + return __qmgr_get_stat1(queue) & QUEUE_STAT1_NEARLY_EMPTY; +} + +/** + * qmgr_stat_above_high_watermark() - checks if a queue is above high watermark + * @queue: queue number + * + * Returns non-zero value if the queue is above high watermark + */ +static inline int qmgr_stat_above_high_watermark(unsigned int queue) +{ + BUG_ON(queue >= HALF_QUEUES); + return __qmgr_get_stat1(queue) & QUEUE_STAT1_NEARLY_FULL; +} + +/** + * qmgr_stat_full() - checks if a hardware queue is full + * @queue: queue number + * + * Returns non-zero value if the queue is full. + */ +static inline int qmgr_stat_full(unsigned int queue) +{ + const struct qmgr_regs __iomem *qmgr_regs = IXP4XX_QMGR_BASE_VIRT; + if (queue >= HALF_QUEUES) + return (__raw_readl(&qmgr_regs->statf_h) >> + (queue - HALF_QUEUES)) & 0x01; + return __qmgr_get_stat1(queue) & QUEUE_STAT1_FULL; +} + +/** + * qmgr_stat_underflow() - checks if a hardware queue experienced underflow + * @queue: queue number + * + * Returns non-zero value if the queue experienced underflow. + */ +static inline int qmgr_stat_underflow(unsigned int queue) +{ + return __qmgr_get_stat2(queue) & QUEUE_STAT2_UNDERFLOW; +} + +/** + * qmgr_stat_overflow() - checks if a hardware queue experienced overflow + * @queue: queue number + * + * Returns non-zero value if the queue experienced overflow. + */ +static inline int qmgr_stat_overflow(unsigned int queue) +{ + return __qmgr_get_stat2(queue) & QUEUE_STAT2_OVERFLOW; +} + +#endif diff --git a/kernel/arch/arm/mach-ixp4xx/include/mach/udc.h b/kernel/arch/arm/mach-ixp4xx/include/mach/udc.h new file mode 100644 index 000000000..7bd8b96c8 --- /dev/null +++ b/kernel/arch/arm/mach-ixp4xx/include/mach/udc.h @@ -0,0 +1,8 @@ +/* + * arch/arm/mach-ixp4xx/include/mach/udc.h + * + */ +#include <linux/platform_data/pxa2xx_udc.h> + +extern void ixp4xx_set_udc_info(struct pxa2xx_udc_mach_info *info); + diff --git a/kernel/arch/arm/mach-ixp4xx/include/mach/uncompress.h b/kernel/arch/arm/mach-ixp4xx/include/mach/uncompress.h new file mode 100644 index 000000000..7b25c0225 --- /dev/null +++ b/kernel/arch/arm/mach-ixp4xx/include/mach/uncompress.h @@ -0,0 +1,56 @@ +/* + * arch/arm/mach-ixp4xx/include/mach/uncompress.h + * + * Copyright (C) 2002 Intel Corporation. + * Copyright (C) 2003-2004 MontaVista Software, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + */ + +#ifndef _ARCH_UNCOMPRESS_H_ +#define _ARCH_UNCOMPRESS_H_ + +#include "ixp4xx-regs.h" +#include <asm/mach-types.h> +#include <linux/serial_reg.h> + +#define TX_DONE (UART_LSR_TEMT|UART_LSR_THRE) + +volatile u32* uart_base; + +static inline void putc(int c) +{ + /* Check THRE and TEMT bits before we transmit the character. + */ + while ((uart_base[UART_LSR] & TX_DONE) != TX_DONE) + barrier(); + + *uart_base = c; +} + +static void flush(void) +{ +} + +static __inline__ void __arch_decomp_setup(unsigned long arch_id) +{ + /* + * Some boards are using UART2 as console + */ + if (machine_is_adi_coyote() || machine_is_gtwx5715() || + machine_is_gateway7001() || machine_is_wg302v2() || + machine_is_devixp() || machine_is_miccpt() || machine_is_mic256()) + uart_base = (volatile u32*) IXP4XX_UART2_BASE_PHYS; + else + uart_base = (volatile u32*) IXP4XX_UART1_BASE_PHYS; +} + +/* + * arch_id is a variable in decompress_kernel() + */ +#define arch_decomp_setup() __arch_decomp_setup(arch_id) + +#endif diff --git a/kernel/arch/arm/mach-ixp4xx/ixdp425-pci.c b/kernel/arch/arm/mach-ixp4xx/ixdp425-pci.c new file mode 100644 index 000000000..318424dd3 --- /dev/null +++ b/kernel/arch/arm/mach-ixp4xx/ixdp425-pci.c @@ -0,0 +1,77 @@ +/* + * arch/arm/mach-ixp4xx/ixdp425-pci.c + * + * IXDP425 board-level PCI initialization + * + * Copyright (C) 2002 Intel Corporation. + * Copyright (C) 2003-2004 MontaVista Software, Inc. + * + * Maintainer: Deepak Saxena <dsaxena@plexity.net> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + */ + +#include <linux/kernel.h> +#include <linux/pci.h> +#include <linux/init.h> +#include <linux/irq.h> +#include <linux/delay.h> +#include <asm/mach/pci.h> +#include <asm/irq.h> +#include <mach/hardware.h> +#include <asm/mach-types.h> + +#define MAX_DEV 4 +#define IRQ_LINES 4 + +/* PCI controller GPIO to IRQ pin mappings */ +#define INTA 11 +#define INTB 10 +#define INTC 9 +#define INTD 8 + + +void __init ixdp425_pci_preinit(void) +{ + irq_set_irq_type(IXP4XX_GPIO_IRQ(INTA), IRQ_TYPE_LEVEL_LOW); + irq_set_irq_type(IXP4XX_GPIO_IRQ(INTB), IRQ_TYPE_LEVEL_LOW); + irq_set_irq_type(IXP4XX_GPIO_IRQ(INTC), IRQ_TYPE_LEVEL_LOW); + irq_set_irq_type(IXP4XX_GPIO_IRQ(INTD), IRQ_TYPE_LEVEL_LOW); + ixp4xx_pci_preinit(); +} + +static int __init ixdp425_map_irq(const struct pci_dev *dev, u8 slot, u8 pin) +{ + static int pci_irq_table[IRQ_LINES] = { + IXP4XX_GPIO_IRQ(INTA), + IXP4XX_GPIO_IRQ(INTB), + IXP4XX_GPIO_IRQ(INTC), + IXP4XX_GPIO_IRQ(INTD) + }; + + if (slot >= 1 && slot <= MAX_DEV && pin >= 1 && pin <= IRQ_LINES) + return pci_irq_table[(slot + pin - 2) % 4]; + + return -1; +} + +struct hw_pci ixdp425_pci __initdata = { + .nr_controllers = 1, + .ops = &ixp4xx_ops, + .preinit = ixdp425_pci_preinit, + .setup = ixp4xx_setup, + .map_irq = ixdp425_map_irq, +}; + +int __init ixdp425_pci_init(void) +{ + if (machine_is_ixdp425() || machine_is_ixcdp1100() || + machine_is_ixdp465() || machine_is_kixrp435()) + pci_common_init(&ixdp425_pci); + return 0; +} + +subsys_initcall(ixdp425_pci_init); diff --git a/kernel/arch/arm/mach-ixp4xx/ixdp425-setup.c b/kernel/arch/arm/mach-ixp4xx/ixdp425-setup.c new file mode 100644 index 000000000..e7b8befa8 --- /dev/null +++ b/kernel/arch/arm/mach-ixp4xx/ixdp425-setup.c @@ -0,0 +1,310 @@ +/* + * arch/arm/mach-ixp4xx/ixdp425-setup.c + * + * IXDP425/IXCDP1100 board-setup + * + * Copyright (C) 2003-2005 MontaVista Software, Inc. + * + * Author: Deepak Saxena <dsaxena@plexity.net> + */ + +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/device.h> +#include <linux/serial.h> +#include <linux/tty.h> +#include <linux/serial_8250.h> +#include <linux/i2c-gpio.h> +#include <linux/io.h> +#include <linux/mtd/mtd.h> +#include <linux/mtd/nand.h> +#include <linux/mtd/partitions.h> +#include <linux/delay.h> +#include <linux/gpio.h> +#include <asm/types.h> +#include <asm/setup.h> +#include <asm/memory.h> +#include <mach/hardware.h> +#include <asm/mach-types.h> +#include <asm/irq.h> +#include <asm/mach/arch.h> +#include <asm/mach/flash.h> + +#define IXDP425_SDA_PIN 7 +#define IXDP425_SCL_PIN 6 + +/* NAND Flash pins */ +#define IXDP425_NAND_NCE_PIN 12 + +#define IXDP425_NAND_CMD_BYTE 0x01 +#define IXDP425_NAND_ADDR_BYTE 0x02 + +static struct flash_platform_data ixdp425_flash_data = { + .map_name = "cfi_probe", + .width = 2, +}; + +static struct resource ixdp425_flash_resource = { + .flags = IORESOURCE_MEM, +}; + +static struct platform_device ixdp425_flash = { + .name = "IXP4XX-Flash", + .id = 0, + .dev = { + .platform_data = &ixdp425_flash_data, + }, + .num_resources = 1, + .resource = &ixdp425_flash_resource, +}; + +#if defined(CONFIG_MTD_NAND_PLATFORM) || \ + defined(CONFIG_MTD_NAND_PLATFORM_MODULE) + +static struct mtd_partition ixdp425_partitions[] = { + { + .name = "ixp400 NAND FS 0", + .offset = 0, + .size = SZ_8M + }, { + .name = "ixp400 NAND FS 1", + .offset = MTDPART_OFS_APPEND, + .size = MTDPART_SIZ_FULL + }, +}; + +static void +ixdp425_flash_nand_cmd_ctrl(struct mtd_info *mtd, int cmd, unsigned int ctrl) +{ + struct nand_chip *this = mtd->priv; + int offset = (int)this->priv; + + if (ctrl & NAND_CTRL_CHANGE) { + if (ctrl & NAND_NCE) { + gpio_set_value(IXDP425_NAND_NCE_PIN, 0); + udelay(5); + } else + gpio_set_value(IXDP425_NAND_NCE_PIN, 1); + + offset = (ctrl & NAND_CLE) ? IXDP425_NAND_CMD_BYTE : 0; + offset |= (ctrl & NAND_ALE) ? IXDP425_NAND_ADDR_BYTE : 0; + this->priv = (void *)offset; + } + + if (cmd != NAND_CMD_NONE) + writeb(cmd, this->IO_ADDR_W + offset); +} + +static struct platform_nand_data ixdp425_flash_nand_data = { + .chip = { + .nr_chips = 1, + .chip_delay = 30, + .partitions = ixdp425_partitions, + .nr_partitions = ARRAY_SIZE(ixdp425_partitions), + }, + .ctrl = { + .cmd_ctrl = ixdp425_flash_nand_cmd_ctrl + } +}; + +static struct resource ixdp425_flash_nand_resource = { + .flags = IORESOURCE_MEM, +}; + +static struct platform_device ixdp425_flash_nand = { + .name = "gen_nand", + .id = -1, + .dev = { + .platform_data = &ixdp425_flash_nand_data, + }, + .num_resources = 1, + .resource = &ixdp425_flash_nand_resource, +}; +#endif /* CONFIG_MTD_NAND_PLATFORM */ + +static struct i2c_gpio_platform_data ixdp425_i2c_gpio_data = { + .sda_pin = IXDP425_SDA_PIN, + .scl_pin = IXDP425_SCL_PIN, +}; + +static struct platform_device ixdp425_i2c_gpio = { + .name = "i2c-gpio", + .id = 0, + .dev = { + .platform_data = &ixdp425_i2c_gpio_data, + }, +}; + +static struct resource ixdp425_uart_resources[] = { + { + .start = IXP4XX_UART1_BASE_PHYS, + .end = IXP4XX_UART1_BASE_PHYS + 0x0fff, + .flags = IORESOURCE_MEM + }, + { + .start = IXP4XX_UART2_BASE_PHYS, + .end = IXP4XX_UART2_BASE_PHYS + 0x0fff, + .flags = IORESOURCE_MEM + } +}; + +static struct plat_serial8250_port ixdp425_uart_data[] = { + { + .mapbase = IXP4XX_UART1_BASE_PHYS, + .membase = (char *)IXP4XX_UART1_BASE_VIRT + REG_OFFSET, + .irq = IRQ_IXP4XX_UART1, + .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST, + .iotype = UPIO_MEM, + .regshift = 2, + .uartclk = IXP4XX_UART_XTAL, + }, + { + .mapbase = IXP4XX_UART2_BASE_PHYS, + .membase = (char *)IXP4XX_UART2_BASE_VIRT + REG_OFFSET, + .irq = IRQ_IXP4XX_UART2, + .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST, + .iotype = UPIO_MEM, + .regshift = 2, + .uartclk = IXP4XX_UART_XTAL, + }, + { }, +}; + +static struct platform_device ixdp425_uart = { + .name = "serial8250", + .id = PLAT8250_DEV_PLATFORM, + .dev.platform_data = ixdp425_uart_data, + .num_resources = 2, + .resource = ixdp425_uart_resources +}; + +/* Built-in 10/100 Ethernet MAC interfaces */ +static struct eth_plat_info ixdp425_plat_eth[] = { + { + .phy = 0, + .rxq = 3, + .txreadyq = 20, + }, { + .phy = 1, + .rxq = 4, + .txreadyq = 21, + } +}; + +static struct platform_device ixdp425_eth[] = { + { + .name = "ixp4xx_eth", + .id = IXP4XX_ETH_NPEB, + .dev.platform_data = ixdp425_plat_eth, + }, { + .name = "ixp4xx_eth", + .id = IXP4XX_ETH_NPEC, + .dev.platform_data = ixdp425_plat_eth + 1, + } +}; + +static struct platform_device *ixdp425_devices[] __initdata = { + &ixdp425_i2c_gpio, + &ixdp425_flash, +#if defined(CONFIG_MTD_NAND_PLATFORM) || \ + defined(CONFIG_MTD_NAND_PLATFORM_MODULE) + &ixdp425_flash_nand, +#endif + &ixdp425_uart, + &ixdp425_eth[0], + &ixdp425_eth[1], +}; + +static void __init ixdp425_init(void) +{ + ixp4xx_sys_init(); + + ixdp425_flash_resource.start = IXP4XX_EXP_BUS_BASE(0); + ixdp425_flash_resource.end = + IXP4XX_EXP_BUS_BASE(0) + ixp4xx_exp_bus_size - 1; + +#if defined(CONFIG_MTD_NAND_PLATFORM) || \ + defined(CONFIG_MTD_NAND_PLATFORM_MODULE) + ixdp425_flash_nand_resource.start = IXP4XX_EXP_BUS_BASE(3), + ixdp425_flash_nand_resource.end = IXP4XX_EXP_BUS_BASE(3) + 0x10 - 1; + + gpio_request(IXDP425_NAND_NCE_PIN, "NAND NCE pin"); + gpio_direction_output(IXDP425_NAND_NCE_PIN, 0); + + /* Configure expansion bus for NAND Flash */ + *IXP4XX_EXP_CS3 = IXP4XX_EXP_BUS_CS_EN | + IXP4XX_EXP_BUS_STROBE_T(1) | /* extend by 1 clock */ + IXP4XX_EXP_BUS_CYCLES(0) | /* Intel cycles */ + IXP4XX_EXP_BUS_SIZE(0) | /* 512bytes addr space*/ + IXP4XX_EXP_BUS_WR_EN | + IXP4XX_EXP_BUS_BYTE_EN; /* 8 bit data bus */ +#endif + + if (cpu_is_ixp43x()) { + ixdp425_uart.num_resources = 1; + ixdp425_uart_data[1].flags = 0; + } + + platform_add_devices(ixdp425_devices, ARRAY_SIZE(ixdp425_devices)); +} + +#ifdef CONFIG_ARCH_IXDP425 +MACHINE_START(IXDP425, "Intel IXDP425 Development Platform") + /* Maintainer: MontaVista Software, Inc. */ + .map_io = ixp4xx_map_io, + .init_early = ixp4xx_init_early, + .init_irq = ixp4xx_init_irq, + .init_time = ixp4xx_timer_init, + .atag_offset = 0x100, + .init_machine = ixdp425_init, +#if defined(CONFIG_PCI) + .dma_zone_size = SZ_64M, +#endif + .restart = ixp4xx_restart, +MACHINE_END +#endif + +#ifdef CONFIG_MACH_IXDP465 +MACHINE_START(IXDP465, "Intel IXDP465 Development Platform") + /* Maintainer: MontaVista Software, Inc. */ + .map_io = ixp4xx_map_io, + .init_early = ixp4xx_init_early, + .init_irq = ixp4xx_init_irq, + .init_time = ixp4xx_timer_init, + .atag_offset = 0x100, + .init_machine = ixdp425_init, +#if defined(CONFIG_PCI) + .dma_zone_size = SZ_64M, +#endif +MACHINE_END +#endif + +#ifdef CONFIG_ARCH_PRPMC1100 +MACHINE_START(IXCDP1100, "Intel IXCDP1100 Development Platform") + /* Maintainer: MontaVista Software, Inc. */ + .map_io = ixp4xx_map_io, + .init_early = ixp4xx_init_early, + .init_irq = ixp4xx_init_irq, + .init_time = ixp4xx_timer_init, + .atag_offset = 0x100, + .init_machine = ixdp425_init, +#if defined(CONFIG_PCI) + .dma_zone_size = SZ_64M, +#endif +MACHINE_END +#endif + +#ifdef CONFIG_MACH_KIXRP435 +MACHINE_START(KIXRP435, "Intel KIXRP435 Reference Platform") + /* Maintainer: MontaVista Software, Inc. */ + .map_io = ixp4xx_map_io, + .init_early = ixp4xx_init_early, + .init_irq = ixp4xx_init_irq, + .init_time = ixp4xx_timer_init, + .atag_offset = 0x100, + .init_machine = ixdp425_init, +#if defined(CONFIG_PCI) + .dma_zone_size = SZ_64M, +#endif +MACHINE_END +#endif diff --git a/kernel/arch/arm/mach-ixp4xx/ixdpg425-pci.c b/kernel/arch/arm/mach-ixp4xx/ixdpg425-pci.c new file mode 100644 index 000000000..1f8717ba1 --- /dev/null +++ b/kernel/arch/arm/mach-ixp4xx/ixdpg425-pci.c @@ -0,0 +1,58 @@ +/* + * arch/arm/mach-ixp4xx/ixdpg425-pci.c + * + * PCI setup routines for Intel IXDPG425 Platform + * + * Copyright (C) 2004 MontaVista Softwrae, Inc. + * + * Maintainer: Deepak Saxena <dsaxena@plexity.net> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + */ + +#include <linux/kernel.h> +#include <linux/pci.h> +#include <linux/init.h> +#include <linux/irq.h> + +#include <asm/mach-types.h> +#include <mach/hardware.h> + +#include <asm/mach/pci.h> + +void __init ixdpg425_pci_preinit(void) +{ + irq_set_irq_type(IRQ_IXP4XX_GPIO6, IRQ_TYPE_LEVEL_LOW); + irq_set_irq_type(IRQ_IXP4XX_GPIO7, IRQ_TYPE_LEVEL_LOW); + + ixp4xx_pci_preinit(); +} + +static int __init ixdpg425_map_irq(const struct pci_dev *dev, u8 slot, u8 pin) +{ + if (slot == 12 || slot == 13) + return IRQ_IXP4XX_GPIO7; + else if (slot == 14) + return IRQ_IXP4XX_GPIO6; + else return -1; +} + +struct hw_pci ixdpg425_pci __initdata = { + .nr_controllers = 1, + .ops = &ixp4xx_ops, + .preinit = ixdpg425_pci_preinit, + .setup = ixp4xx_setup, + .map_irq = ixdpg425_map_irq, +}; + +int __init ixdpg425_pci_init(void) +{ + if (machine_is_ixdpg425()) + pci_common_init(&ixdpg425_pci); + return 0; +} + +subsys_initcall(ixdpg425_pci_init); diff --git a/kernel/arch/arm/mach-ixp4xx/ixp4xx_npe.c b/kernel/arch/arm/mach-ixp4xx/ixp4xx_npe.c new file mode 100644 index 000000000..d4eb09a62 --- /dev/null +++ b/kernel/arch/arm/mach-ixp4xx/ixp4xx_npe.c @@ -0,0 +1,742 @@ +/* + * Intel IXP4xx Network Processor Engine driver for Linux + * + * Copyright (C) 2007 Krzysztof Halasa <khc@pm.waw.pl> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of version 2 of the GNU General Public License + * as published by the Free Software Foundation. + * + * The code is based on publicly available information: + * - Intel IXP4xx Developer's Manual and other e-papers + * - Intel IXP400 Access Library Software (BSD license) + * - previous works by Christian Hohnstaedt <chohnstaedt@innominate.com> + * Thanks, Christian. + */ + +#include <linux/delay.h> +#include <linux/dma-mapping.h> +#include <linux/firmware.h> +#include <linux/io.h> +#include <linux/kernel.h> +#include <linux/module.h> +#include <mach/npe.h> + +#define DEBUG_MSG 0 +#define DEBUG_FW 0 + +#define NPE_COUNT 3 +#define MAX_RETRIES 1000 /* microseconds */ +#define NPE_42X_DATA_SIZE 0x800 /* in dwords */ +#define NPE_46X_DATA_SIZE 0x1000 +#define NPE_A_42X_INSTR_SIZE 0x1000 +#define NPE_B_AND_C_42X_INSTR_SIZE 0x800 +#define NPE_46X_INSTR_SIZE 0x1000 +#define REGS_SIZE 0x1000 + +#define NPE_PHYS_REG 32 + +#define FW_MAGIC 0xFEEDF00D +#define FW_BLOCK_TYPE_INSTR 0x0 +#define FW_BLOCK_TYPE_DATA 0x1 +#define FW_BLOCK_TYPE_EOF 0xF + +/* NPE exec status (read) and command (write) */ +#define CMD_NPE_STEP 0x01 +#define CMD_NPE_START 0x02 +#define CMD_NPE_STOP 0x03 +#define CMD_NPE_CLR_PIPE 0x04 +#define CMD_CLR_PROFILE_CNT 0x0C +#define CMD_RD_INS_MEM 0x10 /* instruction memory */ +#define CMD_WR_INS_MEM 0x11 +#define CMD_RD_DATA_MEM 0x12 /* data memory */ +#define CMD_WR_DATA_MEM 0x13 +#define CMD_RD_ECS_REG 0x14 /* exec access register */ +#define CMD_WR_ECS_REG 0x15 + +#define STAT_RUN 0x80000000 +#define STAT_STOP 0x40000000 +#define STAT_CLEAR 0x20000000 +#define STAT_ECS_K 0x00800000 /* pipeline clean */ + +#define NPE_STEVT 0x1B +#define NPE_STARTPC 0x1C +#define NPE_REGMAP 0x1E +#define NPE_CINDEX 0x1F + +#define INSTR_WR_REG_SHORT 0x0000C000 +#define INSTR_WR_REG_BYTE 0x00004000 +#define INSTR_RD_FIFO 0x0F888220 +#define INSTR_RESET_MBOX 0x0FAC8210 + +#define ECS_BG_CTXT_REG_0 0x00 /* Background Executing Context */ +#define ECS_BG_CTXT_REG_1 0x01 /* Stack level */ +#define ECS_BG_CTXT_REG_2 0x02 +#define ECS_PRI_1_CTXT_REG_0 0x04 /* Priority 1 Executing Context */ +#define ECS_PRI_1_CTXT_REG_1 0x05 /* Stack level */ +#define ECS_PRI_1_CTXT_REG_2 0x06 +#define ECS_PRI_2_CTXT_REG_0 0x08 /* Priority 2 Executing Context */ +#define ECS_PRI_2_CTXT_REG_1 0x09 /* Stack level */ +#define ECS_PRI_2_CTXT_REG_2 0x0A +#define ECS_DBG_CTXT_REG_0 0x0C /* Debug Executing Context */ +#define ECS_DBG_CTXT_REG_1 0x0D /* Stack level */ +#define ECS_DBG_CTXT_REG_2 0x0E +#define ECS_INSTRUCT_REG 0x11 /* NPE Instruction Register */ + +#define ECS_REG_0_ACTIVE 0x80000000 /* all levels */ +#define ECS_REG_0_NEXTPC_MASK 0x1FFF0000 /* BG/PRI1/PRI2 levels */ +#define ECS_REG_0_LDUR_BITS 8 +#define ECS_REG_0_LDUR_MASK 0x00000700 /* all levels */ +#define ECS_REG_1_CCTXT_BITS 16 +#define ECS_REG_1_CCTXT_MASK 0x000F0000 /* all levels */ +#define ECS_REG_1_SELCTXT_BITS 0 +#define ECS_REG_1_SELCTXT_MASK 0x0000000F /* all levels */ +#define ECS_DBG_REG_2_IF 0x00100000 /* debug level */ +#define ECS_DBG_REG_2_IE 0x00080000 /* debug level */ + +/* NPE watchpoint_fifo register bit */ +#define WFIFO_VALID 0x80000000 + +/* NPE messaging_status register bit definitions */ +#define MSGSTAT_OFNE 0x00010000 /* OutFifoNotEmpty */ +#define MSGSTAT_IFNF 0x00020000 /* InFifoNotFull */ +#define MSGSTAT_OFNF 0x00040000 /* OutFifoNotFull */ +#define MSGSTAT_IFNE 0x00080000 /* InFifoNotEmpty */ +#define MSGSTAT_MBINT 0x00100000 /* Mailbox interrupt */ +#define MSGSTAT_IFINT 0x00200000 /* InFifo interrupt */ +#define MSGSTAT_OFINT 0x00400000 /* OutFifo interrupt */ +#define MSGSTAT_WFINT 0x00800000 /* WatchFifo interrupt */ + +/* NPE messaging_control register bit definitions */ +#define MSGCTL_OUT_FIFO 0x00010000 /* enable output FIFO */ +#define MSGCTL_IN_FIFO 0x00020000 /* enable input FIFO */ +#define MSGCTL_OUT_FIFO_WRITE 0x01000000 /* enable FIFO + WRITE */ +#define MSGCTL_IN_FIFO_WRITE 0x02000000 + +/* NPE mailbox_status value for reset */ +#define RESET_MBOX_STAT 0x0000F0F0 + +#define NPE_A_FIRMWARE "NPE-A" +#define NPE_B_FIRMWARE "NPE-B" +#define NPE_C_FIRMWARE "NPE-C" + +const char *npe_names[] = { NPE_A_FIRMWARE, NPE_B_FIRMWARE, NPE_C_FIRMWARE }; + +#define print_npe(pri, npe, fmt, ...) \ + printk(pri "%s: " fmt, npe_name(npe), ## __VA_ARGS__) + +#if DEBUG_MSG +#define debug_msg(npe, fmt, ...) \ + print_npe(KERN_DEBUG, npe, fmt, ## __VA_ARGS__) +#else +#define debug_msg(npe, fmt, ...) +#endif + +static struct { + u32 reg, val; +} ecs_reset[] = { + { ECS_BG_CTXT_REG_0, 0xA0000000 }, + { ECS_BG_CTXT_REG_1, 0x01000000 }, + { ECS_BG_CTXT_REG_2, 0x00008000 }, + { ECS_PRI_1_CTXT_REG_0, 0x20000080 }, + { ECS_PRI_1_CTXT_REG_1, 0x01000000 }, + { ECS_PRI_1_CTXT_REG_2, 0x00008000 }, + { ECS_PRI_2_CTXT_REG_0, 0x20000080 }, + { ECS_PRI_2_CTXT_REG_1, 0x01000000 }, + { ECS_PRI_2_CTXT_REG_2, 0x00008000 }, + { ECS_DBG_CTXT_REG_0, 0x20000000 }, + { ECS_DBG_CTXT_REG_1, 0x00000000 }, + { ECS_DBG_CTXT_REG_2, 0x001E0000 }, + { ECS_INSTRUCT_REG, 0x1003C00F }, +}; + +static struct npe npe_tab[NPE_COUNT] = { + { + .id = 0, + .regs = (struct npe_regs __iomem *)IXP4XX_NPEA_BASE_VIRT, + .regs_phys = IXP4XX_NPEA_BASE_PHYS, + }, { + .id = 1, + .regs = (struct npe_regs __iomem *)IXP4XX_NPEB_BASE_VIRT, + .regs_phys = IXP4XX_NPEB_BASE_PHYS, + }, { + .id = 2, + .regs = (struct npe_regs __iomem *)IXP4XX_NPEC_BASE_VIRT, + .regs_phys = IXP4XX_NPEC_BASE_PHYS, + } +}; + +int npe_running(struct npe *npe) +{ + return (__raw_readl(&npe->regs->exec_status_cmd) & STAT_RUN) != 0; +} + +static void npe_cmd_write(struct npe *npe, u32 addr, int cmd, u32 data) +{ + __raw_writel(data, &npe->regs->exec_data); + __raw_writel(addr, &npe->regs->exec_addr); + __raw_writel(cmd, &npe->regs->exec_status_cmd); +} + +static u32 npe_cmd_read(struct npe *npe, u32 addr, int cmd) +{ + __raw_writel(addr, &npe->regs->exec_addr); + __raw_writel(cmd, &npe->regs->exec_status_cmd); + /* Iintroduce extra read cycles after issuing read command to NPE + so that we read the register after the NPE has updated it. + This is to overcome race condition between XScale and NPE */ + __raw_readl(&npe->regs->exec_data); + __raw_readl(&npe->regs->exec_data); + return __raw_readl(&npe->regs->exec_data); +} + +static void npe_clear_active(struct npe *npe, u32 reg) +{ + u32 val = npe_cmd_read(npe, reg, CMD_RD_ECS_REG); + npe_cmd_write(npe, reg, CMD_WR_ECS_REG, val & ~ECS_REG_0_ACTIVE); +} + +static void npe_start(struct npe *npe) +{ + /* ensure only Background Context Stack Level is active */ + npe_clear_active(npe, ECS_PRI_1_CTXT_REG_0); + npe_clear_active(npe, ECS_PRI_2_CTXT_REG_0); + npe_clear_active(npe, ECS_DBG_CTXT_REG_0); + + __raw_writel(CMD_NPE_CLR_PIPE, &npe->regs->exec_status_cmd); + __raw_writel(CMD_NPE_START, &npe->regs->exec_status_cmd); +} + +static void npe_stop(struct npe *npe) +{ + __raw_writel(CMD_NPE_STOP, &npe->regs->exec_status_cmd); + __raw_writel(CMD_NPE_CLR_PIPE, &npe->regs->exec_status_cmd); /*FIXME?*/ +} + +static int __must_check npe_debug_instr(struct npe *npe, u32 instr, u32 ctx, + u32 ldur) +{ + u32 wc; + int i; + + /* set the Active bit, and the LDUR, in the debug level */ + npe_cmd_write(npe, ECS_DBG_CTXT_REG_0, CMD_WR_ECS_REG, + ECS_REG_0_ACTIVE | (ldur << ECS_REG_0_LDUR_BITS)); + + /* set CCTXT at ECS DEBUG L3 to specify in which context to execute + the instruction, and set SELCTXT at ECS DEBUG Level to specify + which context store to access. + Debug ECS Level Reg 1 has form 0x000n000n, where n = context number + */ + npe_cmd_write(npe, ECS_DBG_CTXT_REG_1, CMD_WR_ECS_REG, + (ctx << ECS_REG_1_CCTXT_BITS) | + (ctx << ECS_REG_1_SELCTXT_BITS)); + + /* clear the pipeline */ + __raw_writel(CMD_NPE_CLR_PIPE, &npe->regs->exec_status_cmd); + + /* load NPE instruction into the instruction register */ + npe_cmd_write(npe, ECS_INSTRUCT_REG, CMD_WR_ECS_REG, instr); + + /* we need this value later to wait for completion of NPE execution + step */ + wc = __raw_readl(&npe->regs->watch_count); + + /* issue a Step One command via the Execution Control register */ + __raw_writel(CMD_NPE_STEP, &npe->regs->exec_status_cmd); + + /* Watch Count register increments when NPE completes an instruction */ + for (i = 0; i < MAX_RETRIES; i++) { + if (wc != __raw_readl(&npe->regs->watch_count)) + return 0; + udelay(1); + } + + print_npe(KERN_ERR, npe, "reset: npe_debug_instr(): timeout\n"); + return -ETIMEDOUT; +} + +static int __must_check npe_logical_reg_write8(struct npe *npe, u32 addr, + u8 val, u32 ctx) +{ + /* here we build the NPE assembler instruction: mov8 d0, #0 */ + u32 instr = INSTR_WR_REG_BYTE | /* OpCode */ + addr << 9 | /* base Operand */ + (val & 0x1F) << 4 | /* lower 5 bits to immediate data */ + (val & ~0x1F) << (18 - 5);/* higher 3 bits to CoProc instr. */ + return npe_debug_instr(npe, instr, ctx, 1); /* execute it */ +} + +static int __must_check npe_logical_reg_write16(struct npe *npe, u32 addr, + u16 val, u32 ctx) +{ + /* here we build the NPE assembler instruction: mov16 d0, #0 */ + u32 instr = INSTR_WR_REG_SHORT | /* OpCode */ + addr << 9 | /* base Operand */ + (val & 0x1F) << 4 | /* lower 5 bits to immediate data */ + (val & ~0x1F) << (18 - 5);/* higher 11 bits to CoProc instr. */ + return npe_debug_instr(npe, instr, ctx, 1); /* execute it */ +} + +static int __must_check npe_logical_reg_write32(struct npe *npe, u32 addr, + u32 val, u32 ctx) +{ + /* write in 16 bit steps first the high and then the low value */ + if (npe_logical_reg_write16(npe, addr, val >> 16, ctx)) + return -ETIMEDOUT; + return npe_logical_reg_write16(npe, addr + 2, val & 0xFFFF, ctx); +} + +static int npe_reset(struct npe *npe) +{ + u32 val, ctl, exec_count, ctx_reg2; + int i; + + ctl = (__raw_readl(&npe->regs->messaging_control) | 0x3F000000) & + 0x3F3FFFFF; + + /* disable parity interrupt */ + __raw_writel(ctl & 0x3F00FFFF, &npe->regs->messaging_control); + + /* pre exec - debug instruction */ + /* turn off the halt bit by clearing Execution Count register. */ + exec_count = __raw_readl(&npe->regs->exec_count); + __raw_writel(0, &npe->regs->exec_count); + /* ensure that IF and IE are on (temporarily), so that we don't end up + stepping forever */ + ctx_reg2 = npe_cmd_read(npe, ECS_DBG_CTXT_REG_2, CMD_RD_ECS_REG); + npe_cmd_write(npe, ECS_DBG_CTXT_REG_2, CMD_WR_ECS_REG, ctx_reg2 | + ECS_DBG_REG_2_IF | ECS_DBG_REG_2_IE); + + /* clear the FIFOs */ + while (__raw_readl(&npe->regs->watchpoint_fifo) & WFIFO_VALID) + ; + while (__raw_readl(&npe->regs->messaging_status) & MSGSTAT_OFNE) + /* read from the outFIFO until empty */ + print_npe(KERN_DEBUG, npe, "npe_reset: read FIFO = 0x%X\n", + __raw_readl(&npe->regs->in_out_fifo)); + + while (__raw_readl(&npe->regs->messaging_status) & MSGSTAT_IFNE) + /* step execution of the NPE intruction to read inFIFO using + the Debug Executing Context stack */ + if (npe_debug_instr(npe, INSTR_RD_FIFO, 0, 0)) + return -ETIMEDOUT; + + /* reset the mailbox reg from the XScale side */ + __raw_writel(RESET_MBOX_STAT, &npe->regs->mailbox_status); + /* from NPE side */ + if (npe_debug_instr(npe, INSTR_RESET_MBOX, 0, 0)) + return -ETIMEDOUT; + + /* Reset the physical registers in the NPE register file */ + for (val = 0; val < NPE_PHYS_REG; val++) { + if (npe_logical_reg_write16(npe, NPE_REGMAP, val >> 1, 0)) + return -ETIMEDOUT; + /* address is either 0 or 4 */ + if (npe_logical_reg_write32(npe, (val & 1) * 4, 0, 0)) + return -ETIMEDOUT; + } + + /* Reset the context store = each context's Context Store registers */ + + /* Context 0 has no STARTPC. Instead, this value is used to set NextPC + for Background ECS, to set where NPE starts executing code */ + val = npe_cmd_read(npe, ECS_BG_CTXT_REG_0, CMD_RD_ECS_REG); + val &= ~ECS_REG_0_NEXTPC_MASK; + val |= (0 /* NextPC */ << 16) & ECS_REG_0_NEXTPC_MASK; + npe_cmd_write(npe, ECS_BG_CTXT_REG_0, CMD_WR_ECS_REG, val); + + for (i = 0; i < 16; i++) { + if (i) { /* Context 0 has no STEVT nor STARTPC */ + /* STEVT = off, 0x80 */ + if (npe_logical_reg_write8(npe, NPE_STEVT, 0x80, i)) + return -ETIMEDOUT; + if (npe_logical_reg_write16(npe, NPE_STARTPC, 0, i)) + return -ETIMEDOUT; + } + /* REGMAP = d0->p0, d8->p2, d16->p4 */ + if (npe_logical_reg_write16(npe, NPE_REGMAP, 0x820, i)) + return -ETIMEDOUT; + if (npe_logical_reg_write8(npe, NPE_CINDEX, 0, i)) + return -ETIMEDOUT; + } + + /* post exec */ + /* clear active bit in debug level */ + npe_cmd_write(npe, ECS_DBG_CTXT_REG_0, CMD_WR_ECS_REG, 0); + /* clear the pipeline */ + __raw_writel(CMD_NPE_CLR_PIPE, &npe->regs->exec_status_cmd); + /* restore previous values */ + __raw_writel(exec_count, &npe->regs->exec_count); + npe_cmd_write(npe, ECS_DBG_CTXT_REG_2, CMD_WR_ECS_REG, ctx_reg2); + + /* write reset values to Execution Context Stack registers */ + for (val = 0; val < ARRAY_SIZE(ecs_reset); val++) + npe_cmd_write(npe, ecs_reset[val].reg, CMD_WR_ECS_REG, + ecs_reset[val].val); + + /* clear the profile counter */ + __raw_writel(CMD_CLR_PROFILE_CNT, &npe->regs->exec_status_cmd); + + __raw_writel(0, &npe->regs->exec_count); + __raw_writel(0, &npe->regs->action_points[0]); + __raw_writel(0, &npe->regs->action_points[1]); + __raw_writel(0, &npe->regs->action_points[2]); + __raw_writel(0, &npe->regs->action_points[3]); + __raw_writel(0, &npe->regs->watch_count); + + val = ixp4xx_read_feature_bits(); + /* reset the NPE */ + ixp4xx_write_feature_bits(val & + ~(IXP4XX_FEATURE_RESET_NPEA << npe->id)); + /* deassert reset */ + ixp4xx_write_feature_bits(val | + (IXP4XX_FEATURE_RESET_NPEA << npe->id)); + for (i = 0; i < MAX_RETRIES; i++) { + if (ixp4xx_read_feature_bits() & + (IXP4XX_FEATURE_RESET_NPEA << npe->id)) + break; /* NPE is back alive */ + udelay(1); + } + if (i == MAX_RETRIES) + return -ETIMEDOUT; + + npe_stop(npe); + + /* restore NPE configuration bus Control Register - parity settings */ + __raw_writel(ctl, &npe->regs->messaging_control); + return 0; +} + + +int npe_send_message(struct npe *npe, const void *msg, const char *what) +{ + const u32 *send = msg; + int cycles = 0; + + debug_msg(npe, "Trying to send message %s [%08X:%08X]\n", + what, send[0], send[1]); + + if (__raw_readl(&npe->regs->messaging_status) & MSGSTAT_IFNE) { + debug_msg(npe, "NPE input FIFO not empty\n"); + return -EIO; + } + + __raw_writel(send[0], &npe->regs->in_out_fifo); + + if (!(__raw_readl(&npe->regs->messaging_status) & MSGSTAT_IFNF)) { + debug_msg(npe, "NPE input FIFO full\n"); + return -EIO; + } + + __raw_writel(send[1], &npe->regs->in_out_fifo); + + while ((cycles < MAX_RETRIES) && + (__raw_readl(&npe->regs->messaging_status) & MSGSTAT_IFNE)) { + udelay(1); + cycles++; + } + + if (cycles == MAX_RETRIES) { + debug_msg(npe, "Timeout sending message\n"); + return -ETIMEDOUT; + } + +#if DEBUG_MSG > 1 + debug_msg(npe, "Sending a message took %i cycles\n", cycles); +#endif + return 0; +} + +int npe_recv_message(struct npe *npe, void *msg, const char *what) +{ + u32 *recv = msg; + int cycles = 0, cnt = 0; + + debug_msg(npe, "Trying to receive message %s\n", what); + + while (cycles < MAX_RETRIES) { + if (__raw_readl(&npe->regs->messaging_status) & MSGSTAT_OFNE) { + recv[cnt++] = __raw_readl(&npe->regs->in_out_fifo); + if (cnt == 2) + break; + } else { + udelay(1); + cycles++; + } + } + + switch(cnt) { + case 1: + debug_msg(npe, "Received [%08X]\n", recv[0]); + break; + case 2: + debug_msg(npe, "Received [%08X:%08X]\n", recv[0], recv[1]); + break; + } + + if (cycles == MAX_RETRIES) { + debug_msg(npe, "Timeout waiting for message\n"); + return -ETIMEDOUT; + } + +#if DEBUG_MSG > 1 + debug_msg(npe, "Receiving a message took %i cycles\n", cycles); +#endif + return 0; +} + +int npe_send_recv_message(struct npe *npe, void *msg, const char *what) +{ + int result; + u32 *send = msg, recv[2]; + + if ((result = npe_send_message(npe, msg, what)) != 0) + return result; + if ((result = npe_recv_message(npe, recv, what)) != 0) + return result; + + if ((recv[0] != send[0]) || (recv[1] != send[1])) { + debug_msg(npe, "Message %s: unexpected message received\n", + what); + return -EIO; + } + return 0; +} + + +int npe_load_firmware(struct npe *npe, const char *name, struct device *dev) +{ + const struct firmware *fw_entry; + + struct dl_block { + u32 type; + u32 offset; + } *blk; + + struct dl_image { + u32 magic; + u32 id; + u32 size; + union { + u32 data[0]; + struct dl_block blocks[0]; + }; + } *image; + + struct dl_codeblock { + u32 npe_addr; + u32 size; + u32 data[0]; + } *cb; + + int i, j, err, data_size, instr_size, blocks, table_end; + u32 cmd; + + if ((err = request_firmware(&fw_entry, name, dev)) != 0) + return err; + + err = -EINVAL; + if (fw_entry->size < sizeof(struct dl_image)) { + print_npe(KERN_ERR, npe, "incomplete firmware file\n"); + goto err; + } + image = (struct dl_image*)fw_entry->data; + +#if DEBUG_FW + print_npe(KERN_DEBUG, npe, "firmware: %08X %08X %08X (0x%X bytes)\n", + image->magic, image->id, image->size, image->size * 4); +#endif + + if (image->magic == swab32(FW_MAGIC)) { /* swapped file */ + image->id = swab32(image->id); + image->size = swab32(image->size); + } else if (image->magic != FW_MAGIC) { + print_npe(KERN_ERR, npe, "bad firmware file magic: 0x%X\n", + image->magic); + goto err; + } + if ((image->size * 4 + sizeof(struct dl_image)) != fw_entry->size) { + print_npe(KERN_ERR, npe, + "inconsistent size of firmware file\n"); + goto err; + } + if (((image->id >> 24) & 0xF /* NPE ID */) != npe->id) { + print_npe(KERN_ERR, npe, "firmware file NPE ID mismatch\n"); + goto err; + } + if (image->magic == swab32(FW_MAGIC)) + for (i = 0; i < image->size; i++) + image->data[i] = swab32(image->data[i]); + + if (cpu_is_ixp42x() && ((image->id >> 28) & 0xF /* device ID */)) { + print_npe(KERN_INFO, npe, "IXP43x/IXP46x firmware ignored on " + "IXP42x\n"); + goto err; + } + + if (npe_running(npe)) { + print_npe(KERN_INFO, npe, "unable to load firmware, NPE is " + "already running\n"); + err = -EBUSY; + goto err; + } +#if 0 + npe_stop(npe); + npe_reset(npe); +#endif + + print_npe(KERN_INFO, npe, "firmware functionality 0x%X, " + "revision 0x%X:%X\n", (image->id >> 16) & 0xFF, + (image->id >> 8) & 0xFF, image->id & 0xFF); + + if (cpu_is_ixp42x()) { + if (!npe->id) + instr_size = NPE_A_42X_INSTR_SIZE; + else + instr_size = NPE_B_AND_C_42X_INSTR_SIZE; + data_size = NPE_42X_DATA_SIZE; + } else { + instr_size = NPE_46X_INSTR_SIZE; + data_size = NPE_46X_DATA_SIZE; + } + + for (blocks = 0; blocks * sizeof(struct dl_block) / 4 < image->size; + blocks++) + if (image->blocks[blocks].type == FW_BLOCK_TYPE_EOF) + break; + if (blocks * sizeof(struct dl_block) / 4 >= image->size) { + print_npe(KERN_INFO, npe, "firmware EOF block marker not " + "found\n"); + goto err; + } + +#if DEBUG_FW + print_npe(KERN_DEBUG, npe, "%i firmware blocks found\n", blocks); +#endif + + table_end = blocks * sizeof(struct dl_block) / 4 + 1 /* EOF marker */; + for (i = 0, blk = image->blocks; i < blocks; i++, blk++) { + if (blk->offset > image->size - sizeof(struct dl_codeblock) / 4 + || blk->offset < table_end) { + print_npe(KERN_INFO, npe, "invalid offset 0x%X of " + "firmware block #%i\n", blk->offset, i); + goto err; + } + + cb = (struct dl_codeblock*)&image->data[blk->offset]; + if (blk->type == FW_BLOCK_TYPE_INSTR) { + if (cb->npe_addr + cb->size > instr_size) + goto too_big; + cmd = CMD_WR_INS_MEM; + } else if (blk->type == FW_BLOCK_TYPE_DATA) { + if (cb->npe_addr + cb->size > data_size) + goto too_big; + cmd = CMD_WR_DATA_MEM; + } else { + print_npe(KERN_INFO, npe, "invalid firmware block #%i " + "type 0x%X\n", i, blk->type); + goto err; + } + if (blk->offset + sizeof(*cb) / 4 + cb->size > image->size) { + print_npe(KERN_INFO, npe, "firmware block #%i doesn't " + "fit in firmware image: type %c, start 0x%X," + " length 0x%X\n", i, + blk->type == FW_BLOCK_TYPE_INSTR ? 'I' : 'D', + cb->npe_addr, cb->size); + goto err; + } + + for (j = 0; j < cb->size; j++) + npe_cmd_write(npe, cb->npe_addr + j, cmd, cb->data[j]); + } + + npe_start(npe); + if (!npe_running(npe)) + print_npe(KERN_ERR, npe, "unable to start\n"); + release_firmware(fw_entry); + return 0; + +too_big: + print_npe(KERN_INFO, npe, "firmware block #%i doesn't fit in NPE " + "memory: type %c, start 0x%X, length 0x%X\n", i, + blk->type == FW_BLOCK_TYPE_INSTR ? 'I' : 'D', + cb->npe_addr, cb->size); +err: + release_firmware(fw_entry); + return err; +} + + +struct npe *npe_request(unsigned id) +{ + if (id < NPE_COUNT) + if (npe_tab[id].valid) + if (try_module_get(THIS_MODULE)) + return &npe_tab[id]; + return NULL; +} + +void npe_release(struct npe *npe) +{ + module_put(THIS_MODULE); +} + + +static int __init npe_init_module(void) +{ + + int i, found = 0; + + for (i = 0; i < NPE_COUNT; i++) { + struct npe *npe = &npe_tab[i]; + if (!(ixp4xx_read_feature_bits() & + (IXP4XX_FEATURE_RESET_NPEA << i))) + continue; /* NPE already disabled or not present */ + if (!(npe->mem_res = request_mem_region(npe->regs_phys, + REGS_SIZE, + npe_name(npe)))) { + print_npe(KERN_ERR, npe, + "failed to request memory region\n"); + continue; + } + + if (npe_reset(npe)) + continue; + npe->valid = 1; + found++; + } + + if (!found) + return -ENODEV; + return 0; +} + +static void __exit npe_cleanup_module(void) +{ + int i; + + for (i = 0; i < NPE_COUNT; i++) + if (npe_tab[i].mem_res) { + npe_reset(&npe_tab[i]); + release_resource(npe_tab[i].mem_res); + } +} + +module_init(npe_init_module); +module_exit(npe_cleanup_module); + +MODULE_AUTHOR("Krzysztof Halasa"); +MODULE_LICENSE("GPL v2"); +MODULE_FIRMWARE(NPE_A_FIRMWARE); +MODULE_FIRMWARE(NPE_B_FIRMWARE); +MODULE_FIRMWARE(NPE_C_FIRMWARE); + +EXPORT_SYMBOL(npe_names); +EXPORT_SYMBOL(npe_running); +EXPORT_SYMBOL(npe_request); +EXPORT_SYMBOL(npe_release); +EXPORT_SYMBOL(npe_load_firmware); +EXPORT_SYMBOL(npe_send_message); +EXPORT_SYMBOL(npe_recv_message); +EXPORT_SYMBOL(npe_send_recv_message); diff --git a/kernel/arch/arm/mach-ixp4xx/ixp4xx_qmgr.c b/kernel/arch/arm/mach-ixp4xx/ixp4xx_qmgr.c new file mode 100644 index 000000000..9d1b6b7c3 --- /dev/null +++ b/kernel/arch/arm/mach-ixp4xx/ixp4xx_qmgr.c @@ -0,0 +1,372 @@ +/* + * Intel IXP4xx Queue Manager driver for Linux + * + * Copyright (C) 2007 Krzysztof Halasa <khc@pm.waw.pl> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of version 2 of the GNU General Public License + * as published by the Free Software Foundation. + */ + +#include <linux/ioport.h> +#include <linux/interrupt.h> +#include <linux/kernel.h> +#include <linux/module.h> +#include <mach/qmgr.h> + +static struct qmgr_regs __iomem *qmgr_regs = IXP4XX_QMGR_BASE_VIRT; +static struct resource *mem_res; +static spinlock_t qmgr_lock; +static u32 used_sram_bitmap[4]; /* 128 16-dword pages */ +static void (*irq_handlers[QUEUES])(void *pdev); +static void *irq_pdevs[QUEUES]; + +#if DEBUG_QMGR +char qmgr_queue_descs[QUEUES][32]; +#endif + +void qmgr_set_irq(unsigned int queue, int src, + void (*handler)(void *pdev), void *pdev) +{ + unsigned long flags; + + spin_lock_irqsave(&qmgr_lock, flags); + if (queue < HALF_QUEUES) { + u32 __iomem *reg; + int bit; + BUG_ON(src > QUEUE_IRQ_SRC_NOT_FULL); + reg = &qmgr_regs->irqsrc[queue >> 3]; /* 8 queues per u32 */ + bit = (queue % 8) * 4; /* 3 bits + 1 reserved bit per queue */ + __raw_writel((__raw_readl(reg) & ~(7 << bit)) | (src << bit), + reg); + } else + /* IRQ source for queues 32-63 is fixed */ + BUG_ON(src != QUEUE_IRQ_SRC_NOT_NEARLY_EMPTY); + + irq_handlers[queue] = handler; + irq_pdevs[queue] = pdev; + spin_unlock_irqrestore(&qmgr_lock, flags); +} + + +static irqreturn_t qmgr_irq1_a0(int irq, void *pdev) +{ + int i, ret = 0; + u32 en_bitmap, src, stat; + + /* ACK - it may clear any bits so don't rely on it */ + __raw_writel(0xFFFFFFFF, &qmgr_regs->irqstat[0]); + + en_bitmap = qmgr_regs->irqen[0]; + while (en_bitmap) { + i = __fls(en_bitmap); /* number of the last "low" queue */ + en_bitmap &= ~BIT(i); + src = qmgr_regs->irqsrc[i >> 3]; + stat = qmgr_regs->stat1[i >> 3]; + if (src & 4) /* the IRQ condition is inverted */ + stat = ~stat; + if (stat & BIT(src & 3)) { + irq_handlers[i](irq_pdevs[i]); + ret = IRQ_HANDLED; + } + } + return ret; +} + + +static irqreturn_t qmgr_irq2_a0(int irq, void *pdev) +{ + int i, ret = 0; + u32 req_bitmap; + + /* ACK - it may clear any bits so don't rely on it */ + __raw_writel(0xFFFFFFFF, &qmgr_regs->irqstat[1]); + + req_bitmap = qmgr_regs->irqen[1] & qmgr_regs->statne_h; + while (req_bitmap) { + i = __fls(req_bitmap); /* number of the last "high" queue */ + req_bitmap &= ~BIT(i); + irq_handlers[HALF_QUEUES + i](irq_pdevs[HALF_QUEUES + i]); + ret = IRQ_HANDLED; + } + return ret; +} + + +static irqreturn_t qmgr_irq(int irq, void *pdev) +{ + int i, half = (irq == IRQ_IXP4XX_QM1 ? 0 : 1); + u32 req_bitmap = __raw_readl(&qmgr_regs->irqstat[half]); + + if (!req_bitmap) + return 0; + __raw_writel(req_bitmap, &qmgr_regs->irqstat[half]); /* ACK */ + + while (req_bitmap) { + i = __fls(req_bitmap); /* number of the last queue */ + req_bitmap &= ~BIT(i); + i += half * HALF_QUEUES; + irq_handlers[i](irq_pdevs[i]); + } + return IRQ_HANDLED; +} + + +void qmgr_enable_irq(unsigned int queue) +{ + unsigned long flags; + int half = queue / 32; + u32 mask = 1 << (queue & (HALF_QUEUES - 1)); + + spin_lock_irqsave(&qmgr_lock, flags); + __raw_writel(__raw_readl(&qmgr_regs->irqen[half]) | mask, + &qmgr_regs->irqen[half]); + spin_unlock_irqrestore(&qmgr_lock, flags); +} + +void qmgr_disable_irq(unsigned int queue) +{ + unsigned long flags; + int half = queue / 32; + u32 mask = 1 << (queue & (HALF_QUEUES - 1)); + + spin_lock_irqsave(&qmgr_lock, flags); + __raw_writel(__raw_readl(&qmgr_regs->irqen[half]) & ~mask, + &qmgr_regs->irqen[half]); + __raw_writel(mask, &qmgr_regs->irqstat[half]); /* clear */ + spin_unlock_irqrestore(&qmgr_lock, flags); +} + +static inline void shift_mask(u32 *mask) +{ + mask[3] = mask[3] << 1 | mask[2] >> 31; + mask[2] = mask[2] << 1 | mask[1] >> 31; + mask[1] = mask[1] << 1 | mask[0] >> 31; + mask[0] <<= 1; +} + +#if DEBUG_QMGR +int qmgr_request_queue(unsigned int queue, unsigned int len /* dwords */, + unsigned int nearly_empty_watermark, + unsigned int nearly_full_watermark, + const char *desc_format, const char* name) +#else +int __qmgr_request_queue(unsigned int queue, unsigned int len /* dwords */, + unsigned int nearly_empty_watermark, + unsigned int nearly_full_watermark) +#endif +{ + u32 cfg, addr = 0, mask[4]; /* in 16-dwords */ + int err; + + BUG_ON(queue >= QUEUES); + + if ((nearly_empty_watermark | nearly_full_watermark) & ~7) + return -EINVAL; + + switch (len) { + case 16: + cfg = 0 << 24; + mask[0] = 0x1; + break; + case 32: + cfg = 1 << 24; + mask[0] = 0x3; + break; + case 64: + cfg = 2 << 24; + mask[0] = 0xF; + break; + case 128: + cfg = 3 << 24; + mask[0] = 0xFF; + break; + default: + return -EINVAL; + } + + cfg |= nearly_empty_watermark << 26; + cfg |= nearly_full_watermark << 29; + len /= 16; /* in 16-dwords: 1, 2, 4 or 8 */ + mask[1] = mask[2] = mask[3] = 0; + + if (!try_module_get(THIS_MODULE)) + return -ENODEV; + + spin_lock_irq(&qmgr_lock); + if (__raw_readl(&qmgr_regs->sram[queue])) { + err = -EBUSY; + goto err; + } + + while (1) { + if (!(used_sram_bitmap[0] & mask[0]) && + !(used_sram_bitmap[1] & mask[1]) && + !(used_sram_bitmap[2] & mask[2]) && + !(used_sram_bitmap[3] & mask[3])) + break; /* found free space */ + + addr++; + shift_mask(mask); + if (addr + len > ARRAY_SIZE(qmgr_regs->sram)) { + printk(KERN_ERR "qmgr: no free SRAM space for" + " queue %i\n", queue); + err = -ENOMEM; + goto err; + } + } + + used_sram_bitmap[0] |= mask[0]; + used_sram_bitmap[1] |= mask[1]; + used_sram_bitmap[2] |= mask[2]; + used_sram_bitmap[3] |= mask[3]; + __raw_writel(cfg | (addr << 14), &qmgr_regs->sram[queue]); +#if DEBUG_QMGR + snprintf(qmgr_queue_descs[queue], sizeof(qmgr_queue_descs[0]), + desc_format, name); + printk(KERN_DEBUG "qmgr: requested queue %s(%i) addr = 0x%02X\n", + qmgr_queue_descs[queue], queue, addr); +#endif + spin_unlock_irq(&qmgr_lock); + return 0; + +err: + spin_unlock_irq(&qmgr_lock); + module_put(THIS_MODULE); + return err; +} + +void qmgr_release_queue(unsigned int queue) +{ + u32 cfg, addr, mask[4]; + + BUG_ON(queue >= QUEUES); /* not in valid range */ + + spin_lock_irq(&qmgr_lock); + cfg = __raw_readl(&qmgr_regs->sram[queue]); + addr = (cfg >> 14) & 0xFF; + + BUG_ON(!addr); /* not requested */ + + switch ((cfg >> 24) & 3) { + case 0: mask[0] = 0x1; break; + case 1: mask[0] = 0x3; break; + case 2: mask[0] = 0xF; break; + case 3: mask[0] = 0xFF; break; + } + + mask[1] = mask[2] = mask[3] = 0; + + while (addr--) + shift_mask(mask); + +#if DEBUG_QMGR + printk(KERN_DEBUG "qmgr: releasing queue %s(%i)\n", + qmgr_queue_descs[queue], queue); + qmgr_queue_descs[queue][0] = '\x0'; +#endif + + while ((addr = qmgr_get_entry(queue))) + printk(KERN_ERR "qmgr: released queue %i not empty: 0x%08X\n", + queue, addr); + + __raw_writel(0, &qmgr_regs->sram[queue]); + + used_sram_bitmap[0] &= ~mask[0]; + used_sram_bitmap[1] &= ~mask[1]; + used_sram_bitmap[2] &= ~mask[2]; + used_sram_bitmap[3] &= ~mask[3]; + irq_handlers[queue] = NULL; /* catch IRQ bugs */ + spin_unlock_irq(&qmgr_lock); + + module_put(THIS_MODULE); +} + +static int qmgr_init(void) +{ + int i, err; + irq_handler_t handler1, handler2; + + mem_res = request_mem_region(IXP4XX_QMGR_BASE_PHYS, + IXP4XX_QMGR_REGION_SIZE, + "IXP4xx Queue Manager"); + if (mem_res == NULL) + return -EBUSY; + + /* reset qmgr registers */ + for (i = 0; i < 4; i++) { + __raw_writel(0x33333333, &qmgr_regs->stat1[i]); + __raw_writel(0, &qmgr_regs->irqsrc[i]); + } + for (i = 0; i < 2; i++) { + __raw_writel(0, &qmgr_regs->stat2[i]); + __raw_writel(0xFFFFFFFF, &qmgr_regs->irqstat[i]); /* clear */ + __raw_writel(0, &qmgr_regs->irqen[i]); + } + + __raw_writel(0xFFFFFFFF, &qmgr_regs->statne_h); + __raw_writel(0, &qmgr_regs->statf_h); + + for (i = 0; i < QUEUES; i++) + __raw_writel(0, &qmgr_regs->sram[i]); + + if (cpu_is_ixp42x_rev_a0()) { + handler1 = qmgr_irq1_a0; + handler2 = qmgr_irq2_a0; + } else + handler1 = handler2 = qmgr_irq; + + err = request_irq(IRQ_IXP4XX_QM1, handler1, 0, "IXP4xx Queue Manager", + NULL); + if (err) { + printk(KERN_ERR "qmgr: failed to request IRQ%i (%i)\n", + IRQ_IXP4XX_QM1, err); + goto error_irq; + } + + err = request_irq(IRQ_IXP4XX_QM2, handler2, 0, "IXP4xx Queue Manager", + NULL); + if (err) { + printk(KERN_ERR "qmgr: failed to request IRQ%i (%i)\n", + IRQ_IXP4XX_QM2, err); + goto error_irq2; + } + + used_sram_bitmap[0] = 0xF; /* 4 first pages reserved for config */ + spin_lock_init(&qmgr_lock); + + printk(KERN_INFO "IXP4xx Queue Manager initialized.\n"); + return 0; + +error_irq2: + free_irq(IRQ_IXP4XX_QM1, NULL); +error_irq: + release_mem_region(IXP4XX_QMGR_BASE_PHYS, IXP4XX_QMGR_REGION_SIZE); + return err; +} + +static void qmgr_remove(void) +{ + free_irq(IRQ_IXP4XX_QM1, NULL); + free_irq(IRQ_IXP4XX_QM2, NULL); + synchronize_irq(IRQ_IXP4XX_QM1); + synchronize_irq(IRQ_IXP4XX_QM2); + release_mem_region(IXP4XX_QMGR_BASE_PHYS, IXP4XX_QMGR_REGION_SIZE); +} + +module_init(qmgr_init); +module_exit(qmgr_remove); + +MODULE_LICENSE("GPL v2"); +MODULE_AUTHOR("Krzysztof Halasa"); + +EXPORT_SYMBOL(qmgr_set_irq); +EXPORT_SYMBOL(qmgr_enable_irq); +EXPORT_SYMBOL(qmgr_disable_irq); +#if DEBUG_QMGR +EXPORT_SYMBOL(qmgr_queue_descs); +EXPORT_SYMBOL(qmgr_request_queue); +#else +EXPORT_SYMBOL(__qmgr_request_queue); +#endif +EXPORT_SYMBOL(qmgr_release_queue); diff --git a/kernel/arch/arm/mach-ixp4xx/miccpt-pci.c b/kernel/arch/arm/mach-ixp4xx/miccpt-pci.c new file mode 100644 index 000000000..d114ccd20 --- /dev/null +++ b/kernel/arch/arm/mach-ixp4xx/miccpt-pci.c @@ -0,0 +1,77 @@ +/* + * arch/arm/mach-ixp4xx/miccpt-pci.c + * + * MICCPT board-level PCI initialization + * + * Copyright (C) 2002 Intel Corporation. + * Copyright (C) 2003-2004 MontaVista Software, Inc. + * Copyright (C) 2006 OMICRON electronics GmbH + * + * Author: Michael Jochum <michael.jochum@omicron.at> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + */ + +#include <linux/kernel.h> +#include <linux/pci.h> +#include <linux/init.h> +#include <linux/delay.h> +#include <linux/irq.h> +#include <asm/mach/pci.h> +#include <asm/irq.h> +#include <mach/hardware.h> +#include <asm/mach-types.h> + +#define MAX_DEV 4 +#define IRQ_LINES 4 + +/* PCI controller GPIO to IRQ pin mappings */ +#define INTA 1 +#define INTB 2 +#define INTC 3 +#define INTD 4 + + +void __init miccpt_pci_preinit(void) +{ + irq_set_irq_type(IXP4XX_GPIO_IRQ(INTA), IRQ_TYPE_LEVEL_LOW); + irq_set_irq_type(IXP4XX_GPIO_IRQ(INTB), IRQ_TYPE_LEVEL_LOW); + irq_set_irq_type(IXP4XX_GPIO_IRQ(INTC), IRQ_TYPE_LEVEL_LOW); + irq_set_irq_type(IXP4XX_GPIO_IRQ(INTD), IRQ_TYPE_LEVEL_LOW); + ixp4xx_pci_preinit(); +} + +static int __init miccpt_map_irq(const struct pci_dev *dev, u8 slot, u8 pin) +{ + static int pci_irq_table[IRQ_LINES] = { + IXP4XX_GPIO_IRQ(INTA), + IXP4XX_GPIO_IRQ(INTB), + IXP4XX_GPIO_IRQ(INTC), + IXP4XX_GPIO_IRQ(INTD) + }; + + if (slot >= 1 && slot <= MAX_DEV && pin >= 1 && pin <= IRQ_LINES) + return pci_irq_table[(slot + pin - 2) % 4]; + + return -1; +} + +struct hw_pci miccpt_pci __initdata = { + .nr_controllers = 1, + .ops = &ixp4xx_ops, + .preinit = miccpt_pci_preinit, + .setup = ixp4xx_setup, + .map_irq = miccpt_map_irq, +}; + +int __init miccpt_pci_init(void) +{ + if (machine_is_miccpt()) + pci_common_init(&miccpt_pci); + return 0; +} + +subsys_initcall(miccpt_pci_init); diff --git a/kernel/arch/arm/mach-ixp4xx/nas100d-pci.c b/kernel/arch/arm/mach-ixp4xx/nas100d-pci.c new file mode 100644 index 000000000..8f0eba0a6 --- /dev/null +++ b/kernel/arch/arm/mach-ixp4xx/nas100d-pci.c @@ -0,0 +1,75 @@ +/* + * arch/arm/mach-ixp4xx/nas100d-pci.c + * + * NAS 100d board-level PCI initialization + * + * based on ixdp425-pci.c: + * Copyright (C) 2002 Intel Corporation. + * Copyright (C) 2003-2004 MontaVista Software, Inc. + * + * Maintainer: http://www.nslu2-linux.org/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + */ + +#include <linux/pci.h> +#include <linux/init.h> +#include <linux/irq.h> +#include <asm/mach/pci.h> +#include <asm/mach-types.h> + +#define MAX_DEV 3 +#define IRQ_LINES 3 + +/* PCI controller GPIO to IRQ pin mappings */ +#define INTA 11 +#define INTB 10 +#define INTC 9 +#define INTD 8 +#define INTE 7 + +void __init nas100d_pci_preinit(void) +{ + irq_set_irq_type(IXP4XX_GPIO_IRQ(INTA), IRQ_TYPE_LEVEL_LOW); + irq_set_irq_type(IXP4XX_GPIO_IRQ(INTB), IRQ_TYPE_LEVEL_LOW); + irq_set_irq_type(IXP4XX_GPIO_IRQ(INTC), IRQ_TYPE_LEVEL_LOW); + irq_set_irq_type(IXP4XX_GPIO_IRQ(INTD), IRQ_TYPE_LEVEL_LOW); + irq_set_irq_type(IXP4XX_GPIO_IRQ(INTE), IRQ_TYPE_LEVEL_LOW); + ixp4xx_pci_preinit(); +} + +static int __init nas100d_map_irq(const struct pci_dev *dev, u8 slot, u8 pin) +{ + static int pci_irq_table[MAX_DEV][IRQ_LINES] = { + { IXP4XX_GPIO_IRQ(INTA), -1, -1 }, + { IXP4XX_GPIO_IRQ(INTB), -1, -1 }, + { IXP4XX_GPIO_IRQ(INTC), IXP4XX_GPIO_IRQ(INTD), + IXP4XX_GPIO_IRQ(INTE) }, + }; + + if (slot >= 1 && slot <= MAX_DEV && pin >= 1 && pin <= IRQ_LINES) + return pci_irq_table[slot - 1][pin - 1]; + + return -1; +} + +struct hw_pci __initdata nas100d_pci = { + .nr_controllers = 1, + .ops = &ixp4xx_ops, + .preinit = nas100d_pci_preinit, + .setup = ixp4xx_setup, + .map_irq = nas100d_map_irq, +}; + +int __init nas100d_pci_init(void) +{ + if (machine_is_nas100d()) + pci_common_init(&nas100d_pci); + + return 0; +} + +subsys_initcall(nas100d_pci_init); diff --git a/kernel/arch/arm/mach-ixp4xx/nas100d-setup.c b/kernel/arch/arm/mach-ixp4xx/nas100d-setup.c new file mode 100644 index 000000000..4e0f762bc --- /dev/null +++ b/kernel/arch/arm/mach-ixp4xx/nas100d-setup.c @@ -0,0 +1,336 @@ +/* + * arch/arm/mach-ixp4xx/nas100d-setup.c + * + * NAS 100d board-setup + * + * Copyright (C) 2008 Rod Whitby <rod@whitby.id.au> + * + * based on ixdp425-setup.c: + * Copyright (C) 2003-2004 MontaVista Software, Inc. + * based on nas100d-power.c: + * Copyright (C) 2005 Tower Technologies + * based on nas100d-io.c + * Copyright (C) 2004 Karen Spearel + * + * Author: Alessandro Zummo <a.zummo@towertech.it> + * Author: Rod Whitby <rod@whitby.id.au> + * Maintainers: http://www.nslu2-linux.org/ + * + */ +#include <linux/gpio.h> +#include <linux/if_ether.h> +#include <linux/irq.h> +#include <linux/jiffies.h> +#include <linux/timer.h> +#include <linux/serial.h> +#include <linux/serial_8250.h> +#include <linux/leds.h> +#include <linux/reboot.h> +#include <linux/i2c.h> +#include <linux/i2c-gpio.h> +#include <linux/io.h> +#include <asm/mach-types.h> +#include <asm/mach/arch.h> +#include <asm/mach/flash.h> + +#define NAS100D_SDA_PIN 5 +#define NAS100D_SCL_PIN 6 + +/* Buttons */ +#define NAS100D_PB_GPIO 14 /* power button */ +#define NAS100D_RB_GPIO 4 /* reset button */ + +/* Power control */ +#define NAS100D_PO_GPIO 12 /* power off */ + +/* LEDs */ +#define NAS100D_LED_WLAN_GPIO 0 +#define NAS100D_LED_DISK_GPIO 3 +#define NAS100D_LED_PWR_GPIO 15 + +static struct flash_platform_data nas100d_flash_data = { + .map_name = "cfi_probe", + .width = 2, +}; + +static struct resource nas100d_flash_resource = { + .flags = IORESOURCE_MEM, +}; + +static struct platform_device nas100d_flash = { + .name = "IXP4XX-Flash", + .id = 0, + .dev.platform_data = &nas100d_flash_data, + .num_resources = 1, + .resource = &nas100d_flash_resource, +}; + +static struct i2c_board_info __initdata nas100d_i2c_board_info [] = { + { + I2C_BOARD_INFO("pcf8563", 0x51), + }, +}; + +static struct gpio_led nas100d_led_pins[] = { + { + .name = "nas100d:green:wlan", + .gpio = NAS100D_LED_WLAN_GPIO, + .active_low = true, + }, + { + .name = "nas100d:blue:power", /* (off=flashing) */ + .gpio = NAS100D_LED_PWR_GPIO, + .active_low = true, + }, + { + .name = "nas100d:yellow:disk", + .gpio = NAS100D_LED_DISK_GPIO, + .active_low = true, + }, +}; + +static struct gpio_led_platform_data nas100d_led_data = { + .num_leds = ARRAY_SIZE(nas100d_led_pins), + .leds = nas100d_led_pins, +}; + +static struct platform_device nas100d_leds = { + .name = "leds-gpio", + .id = -1, + .dev.platform_data = &nas100d_led_data, +}; + +static struct i2c_gpio_platform_data nas100d_i2c_gpio_data = { + .sda_pin = NAS100D_SDA_PIN, + .scl_pin = NAS100D_SCL_PIN, +}; + +static struct platform_device nas100d_i2c_gpio = { + .name = "i2c-gpio", + .id = 0, + .dev = { + .platform_data = &nas100d_i2c_gpio_data, + }, +}; + +static struct resource nas100d_uart_resources[] = { + { + .start = IXP4XX_UART1_BASE_PHYS, + .end = IXP4XX_UART1_BASE_PHYS + 0x0fff, + .flags = IORESOURCE_MEM, + }, + { + .start = IXP4XX_UART2_BASE_PHYS, + .end = IXP4XX_UART2_BASE_PHYS + 0x0fff, + .flags = IORESOURCE_MEM, + } +}; + +static struct plat_serial8250_port nas100d_uart_data[] = { + { + .mapbase = IXP4XX_UART1_BASE_PHYS, + .membase = (char *)IXP4XX_UART1_BASE_VIRT + REG_OFFSET, + .irq = IRQ_IXP4XX_UART1, + .flags = UPF_BOOT_AUTOCONF, + .iotype = UPIO_MEM, + .regshift = 2, + .uartclk = IXP4XX_UART_XTAL, + }, + { + .mapbase = IXP4XX_UART2_BASE_PHYS, + .membase = (char *)IXP4XX_UART2_BASE_VIRT + REG_OFFSET, + .irq = IRQ_IXP4XX_UART2, + .flags = UPF_BOOT_AUTOCONF, + .iotype = UPIO_MEM, + .regshift = 2, + .uartclk = IXP4XX_UART_XTAL, + }, + { } +}; + +static struct platform_device nas100d_uart = { + .name = "serial8250", + .id = PLAT8250_DEV_PLATFORM, + .dev.platform_data = nas100d_uart_data, + .num_resources = 2, + .resource = nas100d_uart_resources, +}; + +/* Built-in 10/100 Ethernet MAC interfaces */ +static struct eth_plat_info nas100d_plat_eth[] = { + { + .phy = 0, + .rxq = 3, + .txreadyq = 20, + } +}; + +static struct platform_device nas100d_eth[] = { + { + .name = "ixp4xx_eth", + .id = IXP4XX_ETH_NPEB, + .dev.platform_data = nas100d_plat_eth, + } +}; + +static struct platform_device *nas100d_devices[] __initdata = { + &nas100d_i2c_gpio, + &nas100d_flash, + &nas100d_leds, + &nas100d_eth[0], +}; + +static void nas100d_power_off(void) +{ + /* This causes the box to drop the power and go dead. */ + + /* enable the pwr cntl gpio and assert power off */ + gpio_direction_output(NAS100D_PO_GPIO, 1); +} + +/* This is used to make sure the power-button pusher is serious. The button + * must be held until the value of this counter reaches zero. + */ +static int power_button_countdown; + +/* Must hold the button down for at least this many counts to be processed */ +#define PBUTTON_HOLDDOWN_COUNT 4 /* 2 secs */ + +static void nas100d_power_handler(unsigned long data); +static DEFINE_TIMER(nas100d_power_timer, nas100d_power_handler, 0, 0); + +static void nas100d_power_handler(unsigned long data) +{ + /* This routine is called twice per second to check the + * state of the power button. + */ + + if (gpio_get_value(NAS100D_PB_GPIO)) { + + /* IO Pin is 1 (button pushed) */ + if (power_button_countdown > 0) + power_button_countdown--; + + } else { + + /* Done on button release, to allow for auto-power-on mods. */ + if (power_button_countdown == 0) { + /* Signal init to do the ctrlaltdel action, + * this will bypass init if it hasn't started + * and do a kernel_restart. + */ + ctrl_alt_del(); + + /* Change the state of the power LED to "blink" */ + gpio_set_value(NAS100D_LED_PWR_GPIO, 0); + } else { + power_button_countdown = PBUTTON_HOLDDOWN_COUNT; + } + } + + mod_timer(&nas100d_power_timer, jiffies + msecs_to_jiffies(500)); +} + +static irqreturn_t nas100d_reset_handler(int irq, void *dev_id) +{ + /* This is the paper-clip reset, it shuts the machine down directly. */ + machine_power_off(); + + return IRQ_HANDLED; +} + +static int __init nas100d_gpio_init(void) +{ + if (!machine_is_nas100d()) + return 0; + + /* + * The power button on the Iomega NAS100d is on GPIO 14, but + * it cannot handle interrupts on that GPIO line. So we'll + * have to poll it with a kernel timer. + */ + + /* Request the power off GPIO */ + gpio_request(NAS100D_PO_GPIO, "power off"); + + /* Make sure that the power button GPIO is set up as an input */ + gpio_request(NAS100D_PB_GPIO, "power button"); + gpio_direction_input(NAS100D_PB_GPIO); + + /* Set the initial value for the power button IRQ handler */ + power_button_countdown = PBUTTON_HOLDDOWN_COUNT; + + mod_timer(&nas100d_power_timer, jiffies + msecs_to_jiffies(500)); + + return 0; +} +device_initcall(nas100d_gpio_init); + +static void __init nas100d_init(void) +{ + uint8_t __iomem *f; + int i; + + ixp4xx_sys_init(); + + /* gpio 14 and 15 are _not_ clocks */ + *IXP4XX_GPIO_GPCLKR = 0; + + nas100d_flash_resource.start = IXP4XX_EXP_BUS_BASE(0); + nas100d_flash_resource.end = + IXP4XX_EXP_BUS_BASE(0) + ixp4xx_exp_bus_size - 1; + + i2c_register_board_info(0, nas100d_i2c_board_info, + ARRAY_SIZE(nas100d_i2c_board_info)); + + /* + * This is only useful on a modified machine, but it is valuable + * to have it first in order to see debug messages, and so that + * it does *not* get removed if platform_add_devices fails! + */ + (void)platform_device_register(&nas100d_uart); + + platform_add_devices(nas100d_devices, ARRAY_SIZE(nas100d_devices)); + + pm_power_off = nas100d_power_off; + + if (request_irq(gpio_to_irq(NAS100D_RB_GPIO), &nas100d_reset_handler, + IRQF_TRIGGER_LOW, "NAS100D reset button", NULL) < 0) { + + printk(KERN_DEBUG "Reset Button IRQ %d not available\n", + gpio_to_irq(NAS100D_RB_GPIO)); + } + + /* + * Map in a portion of the flash and read the MAC address. + * Since it is stored in BE in the flash itself, we need to + * byteswap it if we're in LE mode. + */ + f = ioremap(IXP4XX_EXP_BUS_BASE(0), 0x1000000); + if (f) { + for (i = 0; i < 6; i++) +#ifdef __ARMEB__ + nas100d_plat_eth[0].hwaddr[i] = readb(f + 0xFC0FD8 + i); +#else + nas100d_plat_eth[0].hwaddr[i] = readb(f + 0xFC0FD8 + (i^3)); +#endif + iounmap(f); + } + printk(KERN_INFO "NAS100D: Using MAC address %pM for port 0\n", + nas100d_plat_eth[0].hwaddr); + +} + +MACHINE_START(NAS100D, "Iomega NAS 100d") + /* Maintainer: www.nslu2-linux.org */ + .atag_offset = 0x100, + .map_io = ixp4xx_map_io, + .init_early = ixp4xx_init_early, + .init_irq = ixp4xx_init_irq, + .init_time = ixp4xx_timer_init, + .init_machine = nas100d_init, +#if defined(CONFIG_PCI) + .dma_zone_size = SZ_64M, +#endif + .restart = ixp4xx_restart, +MACHINE_END diff --git a/kernel/arch/arm/mach-ixp4xx/nslu2-pci.c b/kernel/arch/arm/mach-ixp4xx/nslu2-pci.c new file mode 100644 index 000000000..032defe11 --- /dev/null +++ b/kernel/arch/arm/mach-ixp4xx/nslu2-pci.c @@ -0,0 +1,71 @@ +/* + * arch/arm/mach-ixp4xx/nslu2-pci.c + * + * NSLU2 board-level PCI initialization + * + * based on ixdp425-pci.c: + * Copyright (C) 2002 Intel Corporation. + * Copyright (C) 2003-2004 MontaVista Software, Inc. + * + * Maintainer: http://www.nslu2-linux.org/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + */ + +#include <linux/pci.h> +#include <linux/init.h> +#include <linux/irq.h> +#include <asm/mach/pci.h> +#include <asm/mach-types.h> + +#define MAX_DEV 3 +#define IRQ_LINES 3 + +/* PCI controller GPIO to IRQ pin mappings */ +#define INTA 11 +#define INTB 10 +#define INTC 9 +#define INTD 8 + +void __init nslu2_pci_preinit(void) +{ + irq_set_irq_type(IXP4XX_GPIO_IRQ(INTA), IRQ_TYPE_LEVEL_LOW); + irq_set_irq_type(IXP4XX_GPIO_IRQ(INTB), IRQ_TYPE_LEVEL_LOW); + irq_set_irq_type(IXP4XX_GPIO_IRQ(INTC), IRQ_TYPE_LEVEL_LOW); + ixp4xx_pci_preinit(); +} + +static int __init nslu2_map_irq(const struct pci_dev *dev, u8 slot, u8 pin) +{ + static int pci_irq_table[IRQ_LINES] = { + IXP4XX_GPIO_IRQ(INTA), + IXP4XX_GPIO_IRQ(INTB), + IXP4XX_GPIO_IRQ(INTC), + }; + + if (slot >= 1 && slot <= MAX_DEV && pin >= 1 && pin <= IRQ_LINES) + return pci_irq_table[(slot + pin - 2) % IRQ_LINES]; + + return -1; +} + +struct hw_pci __initdata nslu2_pci = { + .nr_controllers = 1, + .ops = &ixp4xx_ops, + .preinit = nslu2_pci_preinit, + .setup = ixp4xx_setup, + .map_irq = nslu2_map_irq, +}; + +int __init nslu2_pci_init(void) /* monkey see, monkey do */ +{ + if (machine_is_nslu2()) + pci_common_init(&nslu2_pci); + + return 0; +} + +subsys_initcall(nslu2_pci_init); diff --git a/kernel/arch/arm/mach-ixp4xx/nslu2-setup.c b/kernel/arch/arm/mach-ixp4xx/nslu2-setup.c new file mode 100644 index 000000000..88c025f52 --- /dev/null +++ b/kernel/arch/arm/mach-ixp4xx/nslu2-setup.c @@ -0,0 +1,313 @@ +/* + * arch/arm/mach-ixp4xx/nslu2-setup.c + * + * NSLU2 board-setup + * + * Copyright (C) 2008 Rod Whitby <rod@whitby.id.au> + * + * based on ixdp425-setup.c: + * Copyright (C) 2003-2004 MontaVista Software, Inc. + * based on nslu2-power.c: + * Copyright (C) 2005 Tower Technologies + * + * Author: Mark Rakes <mrakes at mac.com> + * Author: Rod Whitby <rod@whitby.id.au> + * Author: Alessandro Zummo <a.zummo@towertech.it> + * Maintainers: http://www.nslu2-linux.org/ + * + */ +#include <linux/gpio.h> +#include <linux/if_ether.h> +#include <linux/irq.h> +#include <linux/serial.h> +#include <linux/serial_8250.h> +#include <linux/leds.h> +#include <linux/reboot.h> +#include <linux/i2c.h> +#include <linux/i2c-gpio.h> +#include <linux/io.h> +#include <asm/mach-types.h> +#include <asm/mach/arch.h> +#include <asm/mach/flash.h> +#include <asm/mach/time.h> + +#define NSLU2_SDA_PIN 7 +#define NSLU2_SCL_PIN 6 + +/* NSLU2 Timer */ +#define NSLU2_FREQ 66000000 + +/* Buttons */ +#define NSLU2_PB_GPIO 5 /* power button */ +#define NSLU2_PO_GPIO 8 /* power off */ +#define NSLU2_RB_GPIO 12 /* reset button */ + +/* Buzzer */ +#define NSLU2_GPIO_BUZZ 4 + +/* LEDs */ +#define NSLU2_LED_RED_GPIO 0 +#define NSLU2_LED_GRN_GPIO 1 +#define NSLU2_LED_DISK1_GPIO 3 +#define NSLU2_LED_DISK2_GPIO 2 + +static struct flash_platform_data nslu2_flash_data = { + .map_name = "cfi_probe", + .width = 2, +}; + +static struct resource nslu2_flash_resource = { + .flags = IORESOURCE_MEM, +}; + +static struct platform_device nslu2_flash = { + .name = "IXP4XX-Flash", + .id = 0, + .dev.platform_data = &nslu2_flash_data, + .num_resources = 1, + .resource = &nslu2_flash_resource, +}; + +static struct i2c_gpio_platform_data nslu2_i2c_gpio_data = { + .sda_pin = NSLU2_SDA_PIN, + .scl_pin = NSLU2_SCL_PIN, +}; + +static struct i2c_board_info __initdata nslu2_i2c_board_info [] = { + { + I2C_BOARD_INFO("x1205", 0x6f), + }, +}; + +static struct gpio_led nslu2_led_pins[] = { + { + .name = "nslu2:green:ready", + .gpio = NSLU2_LED_GRN_GPIO, + }, + { + .name = "nslu2:red:status", + .gpio = NSLU2_LED_RED_GPIO, + }, + { + .name = "nslu2:green:disk-1", + .gpio = NSLU2_LED_DISK1_GPIO, + .active_low = true, + }, + { + .name = "nslu2:green:disk-2", + .gpio = NSLU2_LED_DISK2_GPIO, + .active_low = true, + }, +}; + +static struct gpio_led_platform_data nslu2_led_data = { + .num_leds = ARRAY_SIZE(nslu2_led_pins), + .leds = nslu2_led_pins, +}; + +static struct platform_device nslu2_leds = { + .name = "leds-gpio", + .id = -1, + .dev.platform_data = &nslu2_led_data, +}; + +static struct platform_device nslu2_i2c_gpio = { + .name = "i2c-gpio", + .id = 0, + .dev = { + .platform_data = &nslu2_i2c_gpio_data, + }, +}; + +static struct platform_device nslu2_beeper = { + .name = "ixp4xx-beeper", + .id = NSLU2_GPIO_BUZZ, + .num_resources = 0, +}; + +static struct resource nslu2_uart_resources[] = { + { + .start = IXP4XX_UART1_BASE_PHYS, + .end = IXP4XX_UART1_BASE_PHYS + 0x0fff, + .flags = IORESOURCE_MEM, + }, + { + .start = IXP4XX_UART2_BASE_PHYS, + .end = IXP4XX_UART2_BASE_PHYS + 0x0fff, + .flags = IORESOURCE_MEM, + } +}; + +static struct plat_serial8250_port nslu2_uart_data[] = { + { + .mapbase = IXP4XX_UART1_BASE_PHYS, + .membase = (char *)IXP4XX_UART1_BASE_VIRT + REG_OFFSET, + .irq = IRQ_IXP4XX_UART1, + .flags = UPF_BOOT_AUTOCONF, + .iotype = UPIO_MEM, + .regshift = 2, + .uartclk = IXP4XX_UART_XTAL, + }, + { + .mapbase = IXP4XX_UART2_BASE_PHYS, + .membase = (char *)IXP4XX_UART2_BASE_VIRT + REG_OFFSET, + .irq = IRQ_IXP4XX_UART2, + .flags = UPF_BOOT_AUTOCONF, + .iotype = UPIO_MEM, + .regshift = 2, + .uartclk = IXP4XX_UART_XTAL, + }, + { } +}; + +static struct platform_device nslu2_uart = { + .name = "serial8250", + .id = PLAT8250_DEV_PLATFORM, + .dev.platform_data = nslu2_uart_data, + .num_resources = 2, + .resource = nslu2_uart_resources, +}; + +/* Built-in 10/100 Ethernet MAC interfaces */ +static struct eth_plat_info nslu2_plat_eth[] = { + { + .phy = 1, + .rxq = 3, + .txreadyq = 20, + } +}; + +static struct platform_device nslu2_eth[] = { + { + .name = "ixp4xx_eth", + .id = IXP4XX_ETH_NPEB, + .dev.platform_data = nslu2_plat_eth, + } +}; + +static struct platform_device *nslu2_devices[] __initdata = { + &nslu2_i2c_gpio, + &nslu2_flash, + &nslu2_beeper, + &nslu2_leds, + &nslu2_eth[0], +}; + +static void nslu2_power_off(void) +{ + /* This causes the box to drop the power and go dead. */ + + /* enable the pwr cntl gpio and assert power off */ + gpio_direction_output(NSLU2_PO_GPIO, 1); +} + +static irqreturn_t nslu2_power_handler(int irq, void *dev_id) +{ + /* Signal init to do the ctrlaltdel action, this will bypass init if + * it hasn't started and do a kernel_restart. + */ + ctrl_alt_del(); + + return IRQ_HANDLED; +} + +static irqreturn_t nslu2_reset_handler(int irq, void *dev_id) +{ + /* This is the paper-clip reset, it shuts the machine down directly. + */ + machine_power_off(); + + return IRQ_HANDLED; +} + +static int __init nslu2_gpio_init(void) +{ + if (!machine_is_nslu2()) + return 0; + + /* Request the power off GPIO */ + return gpio_request(NSLU2_PO_GPIO, "power off"); +} +device_initcall(nslu2_gpio_init); + +static void __init nslu2_timer_init(void) +{ + /* The xtal on this machine is non-standard. */ + ixp4xx_timer_freq = NSLU2_FREQ; + + /* Call standard timer_init function. */ + ixp4xx_timer_init(); +} + +static void __init nslu2_init(void) +{ + uint8_t __iomem *f; + int i; + + ixp4xx_sys_init(); + + nslu2_flash_resource.start = IXP4XX_EXP_BUS_BASE(0); + nslu2_flash_resource.end = + IXP4XX_EXP_BUS_BASE(0) + ixp4xx_exp_bus_size - 1; + + i2c_register_board_info(0, nslu2_i2c_board_info, + ARRAY_SIZE(nslu2_i2c_board_info)); + + /* + * This is only useful on a modified machine, but it is valuable + * to have it first in order to see debug messages, and so that + * it does *not* get removed if platform_add_devices fails! + */ + (void)platform_device_register(&nslu2_uart); + + platform_add_devices(nslu2_devices, ARRAY_SIZE(nslu2_devices)); + + pm_power_off = nslu2_power_off; + + if (request_irq(gpio_to_irq(NSLU2_RB_GPIO), &nslu2_reset_handler, + IRQF_TRIGGER_LOW, "NSLU2 reset button", NULL) < 0) { + + printk(KERN_DEBUG "Reset Button IRQ %d not available\n", + gpio_to_irq(NSLU2_RB_GPIO)); + } + + if (request_irq(gpio_to_irq(NSLU2_PB_GPIO), &nslu2_power_handler, + IRQF_TRIGGER_HIGH, "NSLU2 power button", NULL) < 0) { + + printk(KERN_DEBUG "Power Button IRQ %d not available\n", + gpio_to_irq(NSLU2_PB_GPIO)); + } + + /* + * Map in a portion of the flash and read the MAC address. + * Since it is stored in BE in the flash itself, we need to + * byteswap it if we're in LE mode. + */ + f = ioremap(IXP4XX_EXP_BUS_BASE(0), 0x40000); + if (f) { + for (i = 0; i < 6; i++) +#ifdef __ARMEB__ + nslu2_plat_eth[0].hwaddr[i] = readb(f + 0x3FFB0 + i); +#else + nslu2_plat_eth[0].hwaddr[i] = readb(f + 0x3FFB0 + (i^3)); +#endif + iounmap(f); + } + printk(KERN_INFO "NSLU2: Using MAC address %pM for port 0\n", + nslu2_plat_eth[0].hwaddr); + +} + +MACHINE_START(NSLU2, "Linksys NSLU2") + /* Maintainer: www.nslu2-linux.org */ + .atag_offset = 0x100, + .map_io = ixp4xx_map_io, + .init_early = ixp4xx_init_early, + .init_irq = ixp4xx_init_irq, + .init_time = nslu2_timer_init, + .init_machine = nslu2_init, +#if defined(CONFIG_PCI) + .dma_zone_size = SZ_64M, +#endif + .restart = ixp4xx_restart, +MACHINE_END diff --git a/kernel/arch/arm/mach-ixp4xx/omixp-setup.c b/kernel/arch/arm/mach-ixp4xx/omixp-setup.c new file mode 100644 index 000000000..2d494b454 --- /dev/null +++ b/kernel/arch/arm/mach-ixp4xx/omixp-setup.c @@ -0,0 +1,279 @@ +/* + * arch/arm/mach-ixp4xx/omixp-setup.c + * + * omicron ixp4xx board setup + * Copyright (C) 2009 OMICRON electronics GmbH + * + * based nslu2-setup.c, ixdp425-setup.c: + * Copyright (C) 2003-2004 MontaVista Software, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/kernel.h> +#include <linux/serial.h> +#include <linux/serial_8250.h> +#include <linux/mtd/mtd.h> +#include <linux/mtd/partitions.h> +#include <linux/leds.h> + +#include <asm/setup.h> +#include <asm/memory.h> +#include <asm/mach-types.h> +#include <asm/mach/arch.h> +#include <asm/mach/flash.h> + +#include <mach/hardware.h> + +static struct resource omixp_flash_resources[] = { + { + .flags = IORESOURCE_MEM, + }, { + .flags = IORESOURCE_MEM, + }, +}; + +static struct mtd_partition omixp_partitions[] = { + { + .name = "Recovery Bootloader", + .size = 0x00020000, + .offset = 0, + }, { + .name = "Calibration Data", + .size = 0x00020000, + .offset = 0x00020000, + }, { + .name = "Recovery FPGA", + .size = 0x00020000, + .offset = 0x00040000, + }, { + .name = "Release Bootloader", + .size = 0x00020000, + .offset = 0x00060000, + }, { + .name = "Release FPGA", + .size = 0x00020000, + .offset = 0x00080000, + }, { + .name = "Kernel", + .size = 0x00160000, + .offset = 0x000a0000, + }, { + .name = "Filesystem", + .size = 0x00C00000, + .offset = 0x00200000, + }, { + .name = "Persistent Storage", + .size = 0x00200000, + .offset = 0x00E00000, + }, +}; + +static struct flash_platform_data omixp_flash_data[] = { + { + .map_name = "cfi_probe", + .parts = omixp_partitions, + .nr_parts = ARRAY_SIZE(omixp_partitions), + }, { + .map_name = "cfi_probe", + .parts = NULL, + .nr_parts = 0, + }, +}; + +static struct platform_device omixp_flash_device[] = { + { + .name = "IXP4XX-Flash", + .id = 0, + .dev = { + .platform_data = &omixp_flash_data[0], + }, + .resource = &omixp_flash_resources[0], + .num_resources = 1, + }, { + .name = "IXP4XX-Flash", + .id = 1, + .dev = { + .platform_data = &omixp_flash_data[1], + }, + .resource = &omixp_flash_resources[1], + .num_resources = 1, + }, +}; + +/* Swap UART's - These boards have the console on UART2. The following + * configuration is used: + * ttyS0 .. UART2 + * ttyS1 .. UART1 + * This way standard images can be used with the kernel that expect + * the console on ttyS0. + */ +static struct resource omixp_uart_resources[] = { + { + .start = IXP4XX_UART2_BASE_PHYS, + .end = IXP4XX_UART2_BASE_PHYS + 0x0fff, + .flags = IORESOURCE_MEM, + }, { + .start = IXP4XX_UART1_BASE_PHYS, + .end = IXP4XX_UART1_BASE_PHYS + 0x0fff, + .flags = IORESOURCE_MEM, + }, +}; + +static struct plat_serial8250_port omixp_uart_data[] = { + { + .mapbase = IXP4XX_UART2_BASE_PHYS, + .membase = (char *)IXP4XX_UART2_BASE_VIRT + REG_OFFSET, + .irq = IRQ_IXP4XX_UART2, + .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST, + .iotype = UPIO_MEM, + .regshift = 2, + .uartclk = IXP4XX_UART_XTAL, + }, { + .mapbase = IXP4XX_UART1_BASE_PHYS, + .membase = (char *)IXP4XX_UART1_BASE_VIRT + REG_OFFSET, + .irq = IRQ_IXP4XX_UART1, + .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST, + .iotype = UPIO_MEM, + .regshift = 2, + .uartclk = IXP4XX_UART_XTAL, + }, { + /* list termination */ + } +}; + +static struct platform_device omixp_uart = { + .name = "serial8250", + .id = PLAT8250_DEV_PLATFORM, + .dev.platform_data = omixp_uart_data, + .num_resources = 2, + .resource = omixp_uart_resources, +}; + +static struct gpio_led mic256_led_pins[] = { + { + .name = "LED-A", + .gpio = 7, + }, +}; + +static struct gpio_led_platform_data mic256_led_data = { + .num_leds = ARRAY_SIZE(mic256_led_pins), + .leds = mic256_led_pins, +}; + +static struct platform_device mic256_leds = { + .name = "leds-gpio", + .id = -1, + .dev.platform_data = &mic256_led_data, +}; + +/* Built-in 10/100 Ethernet MAC interfaces */ +static struct eth_plat_info ixdp425_plat_eth[] = { + { + .phy = 0, + .rxq = 3, + .txreadyq = 20, + }, { + .phy = 1, + .rxq = 4, + .txreadyq = 21, + }, +}; + +static struct platform_device ixdp425_eth[] = { + { + .name = "ixp4xx_eth", + .id = IXP4XX_ETH_NPEB, + .dev.platform_data = ixdp425_plat_eth, + }, { + .name = "ixp4xx_eth", + .id = IXP4XX_ETH_NPEC, + .dev.platform_data = ixdp425_plat_eth + 1, + }, +}; + + +static struct platform_device *devixp_pldev[] __initdata = { + &omixp_uart, + &omixp_flash_device[0], + &ixdp425_eth[0], + &ixdp425_eth[1], +}; + +static struct platform_device *mic256_pldev[] __initdata = { + &omixp_uart, + &omixp_flash_device[0], + &mic256_leds, + &ixdp425_eth[0], + &ixdp425_eth[1], +}; + +static struct platform_device *miccpt_pldev[] __initdata = { + &omixp_uart, + &omixp_flash_device[0], + &omixp_flash_device[1], + &ixdp425_eth[0], + &ixdp425_eth[1], +}; + +static void __init omixp_init(void) +{ + ixp4xx_sys_init(); + + /* 16MiB Boot Flash */ + omixp_flash_resources[0].start = IXP4XX_EXP_BUS_BASE(0); + omixp_flash_resources[0].end = IXP4XX_EXP_BUS_END(0); + + /* 32 MiB Data Flash */ + omixp_flash_resources[1].start = IXP4XX_EXP_BUS_BASE(2); + omixp_flash_resources[1].end = IXP4XX_EXP_BUS_END(2); + + if (machine_is_devixp()) + platform_add_devices(devixp_pldev, ARRAY_SIZE(devixp_pldev)); + else if (machine_is_miccpt()) + platform_add_devices(miccpt_pldev, ARRAY_SIZE(miccpt_pldev)); + else if (machine_is_mic256()) + platform_add_devices(mic256_pldev, ARRAY_SIZE(mic256_pldev)); +} + +#ifdef CONFIG_MACH_DEVIXP +MACHINE_START(DEVIXP, "Omicron DEVIXP") + .atag_offset = 0x100, + .map_io = ixp4xx_map_io, + .init_early = ixp4xx_init_early, + .init_irq = ixp4xx_init_irq, + .init_time = ixp4xx_timer_init, + .init_machine = omixp_init, + .restart = ixp4xx_restart, +MACHINE_END +#endif + +#ifdef CONFIG_MACH_MICCPT +MACHINE_START(MICCPT, "Omicron MICCPT") + .atag_offset = 0x100, + .map_io = ixp4xx_map_io, + .init_early = ixp4xx_init_early, + .init_irq = ixp4xx_init_irq, + .init_time = ixp4xx_timer_init, + .init_machine = omixp_init, +#if defined(CONFIG_PCI) + .dma_zone_size = SZ_64M, +#endif + .restart = ixp4xx_restart, +MACHINE_END +#endif + +#ifdef CONFIG_MACH_MIC256 +MACHINE_START(MIC256, "Omicron MIC256") + .atag_offset = 0x100, + .map_io = ixp4xx_map_io, + .init_early = ixp4xx_init_early, + .init_irq = ixp4xx_init_irq, + .init_time = ixp4xx_timer_init, + .init_machine = omixp_init, + .restart = ixp4xx_restart, +MACHINE_END +#endif diff --git a/kernel/arch/arm/mach-ixp4xx/vulcan-pci.c b/kernel/arch/arm/mach-ixp4xx/vulcan-pci.c new file mode 100644 index 000000000..a4220fa5e --- /dev/null +++ b/kernel/arch/arm/mach-ixp4xx/vulcan-pci.c @@ -0,0 +1,72 @@ +/* + * arch/arch/mach-ixp4xx/vulcan-pci.c + * + * Vulcan board-level PCI initialization + * + * Copyright (C) 2010 Marc Zyngier <maz@misterjones.org> + * + * based on ixdp425-pci.c: + * Copyright (C) 2002 Intel Corporation. + * Copyright (C) 2003-2004 MontaVista Software, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + */ + +#include <linux/pci.h> +#include <linux/init.h> +#include <linux/irq.h> +#include <asm/mach/pci.h> +#include <asm/mach-types.h> + +/* PCI controller GPIO to IRQ pin mappings */ +#define INTA 2 +#define INTB 3 + +void __init vulcan_pci_preinit(void) +{ +#ifndef CONFIG_IXP4XX_INDIRECT_PCI + /* + * Cardbus bridge wants way more than the SoC can actually offer, + * and leaves the whole PCI bus in a mess. Artificially limit it + * to 8MB per region. Of course indirect mode doesn't have this + * limitation... + */ + pci_cardbus_mem_size = SZ_8M; + pr_info("Vulcan PCI: limiting CardBus memory size to %dMB\n", + (int)(pci_cardbus_mem_size >> 20)); +#endif + irq_set_irq_type(IXP4XX_GPIO_IRQ(INTA), IRQ_TYPE_LEVEL_LOW); + irq_set_irq_type(IXP4XX_GPIO_IRQ(INTB), IRQ_TYPE_LEVEL_LOW); + ixp4xx_pci_preinit(); +} + +static int __init vulcan_map_irq(const struct pci_dev *dev, u8 slot, u8 pin) +{ + if (slot == 1) + return IXP4XX_GPIO_IRQ(INTA); + + if (slot == 2) + return IXP4XX_GPIO_IRQ(INTB); + + return -1; +} + +struct hw_pci vulcan_pci __initdata = { + .nr_controllers = 1, + .ops = &ixp4xx_ops, + .preinit = vulcan_pci_preinit, + .setup = ixp4xx_setup, + .map_irq = vulcan_map_irq, +}; + +int __init vulcan_pci_init(void) +{ + if (machine_is_arcom_vulcan()) + pci_common_init(&vulcan_pci); + return 0; +} + +subsys_initcall(vulcan_pci_init); diff --git a/kernel/arch/arm/mach-ixp4xx/vulcan-setup.c b/kernel/arch/arm/mach-ixp4xx/vulcan-setup.c new file mode 100644 index 000000000..d599e354c --- /dev/null +++ b/kernel/arch/arm/mach-ixp4xx/vulcan-setup.c @@ -0,0 +1,250 @@ +/* + * arch/arm/mach-ixp4xx/vulcan-setup.c + * + * Arcom/Eurotech Vulcan board-setup + * + * Copyright (C) 2010 Marc Zyngier <maz@misterjones.org> + * + * based on fsg-setup.c: + * Copyright (C) 2008 Rod Whitby <rod@whitby.id.au> + */ + +#include <linux/if_ether.h> +#include <linux/irq.h> +#include <linux/serial.h> +#include <linux/serial_8250.h> +#include <linux/io.h> +#include <linux/w1-gpio.h> +#include <linux/mtd/plat-ram.h> +#include <asm/mach-types.h> +#include <asm/mach/arch.h> +#include <asm/mach/flash.h> + +static struct flash_platform_data vulcan_flash_data = { + .map_name = "cfi_probe", + .width = 2, +}; + +static struct resource vulcan_flash_resource = { + .flags = IORESOURCE_MEM, +}; + +static struct platform_device vulcan_flash = { + .name = "IXP4XX-Flash", + .id = 0, + .dev = { + .platform_data = &vulcan_flash_data, + }, + .resource = &vulcan_flash_resource, + .num_resources = 1, +}; + +static struct platdata_mtd_ram vulcan_sram_data = { + .mapname = "Vulcan SRAM", + .bankwidth = 1, +}; + +static struct resource vulcan_sram_resource = { + .flags = IORESOURCE_MEM, +}; + +static struct platform_device vulcan_sram = { + .name = "mtd-ram", + .id = 0, + .dev = { + .platform_data = &vulcan_sram_data, + }, + .resource = &vulcan_sram_resource, + .num_resources = 1, +}; + +static struct resource vulcan_uart_resources[] = { + [0] = { + .start = IXP4XX_UART1_BASE_PHYS, + .end = IXP4XX_UART1_BASE_PHYS + 0x0fff, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = IXP4XX_UART2_BASE_PHYS, + .end = IXP4XX_UART2_BASE_PHYS + 0x0fff, + .flags = IORESOURCE_MEM, + }, + [2] = { + .flags = IORESOURCE_MEM, + }, +}; + +static struct plat_serial8250_port vulcan_uart_data[] = { + [0] = { + .mapbase = IXP4XX_UART1_BASE_PHYS, + .membase = (char *)IXP4XX_UART1_BASE_VIRT + REG_OFFSET, + .irq = IRQ_IXP4XX_UART1, + .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST, + .iotype = UPIO_MEM, + .regshift = 2, + .uartclk = IXP4XX_UART_XTAL, + }, + [1] = { + .mapbase = IXP4XX_UART2_BASE_PHYS, + .membase = (char *)IXP4XX_UART2_BASE_VIRT + REG_OFFSET, + .irq = IRQ_IXP4XX_UART2, + .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST, + .iotype = UPIO_MEM, + .regshift = 2, + .uartclk = IXP4XX_UART_XTAL, + }, + [2] = { + .irq = IXP4XX_GPIO_IRQ(4), + .irqflags = IRQF_TRIGGER_LOW, + .flags = UPF_IOREMAP | UPF_BOOT_AUTOCONF | UPF_SKIP_TEST, + .iotype = UPIO_MEM, + .uartclk = 1843200, + }, + [3] = { + .irq = IXP4XX_GPIO_IRQ(4), + .irqflags = IRQF_TRIGGER_LOW, + .flags = UPF_IOREMAP | UPF_BOOT_AUTOCONF | UPF_SKIP_TEST, + .iotype = UPIO_MEM, + .uartclk = 1843200, + }, + { } +}; + +static struct platform_device vulcan_uart = { + .name = "serial8250", + .id = PLAT8250_DEV_PLATFORM, + .dev = { + .platform_data = vulcan_uart_data, + }, + .resource = vulcan_uart_resources, + .num_resources = ARRAY_SIZE(vulcan_uart_resources), +}; + +static struct eth_plat_info vulcan_plat_eth[] = { + [0] = { + .phy = 0, + .rxq = 3, + .txreadyq = 20, + }, + [1] = { + .phy = 1, + .rxq = 4, + .txreadyq = 21, + }, +}; + +static struct platform_device vulcan_eth[] = { + [0] = { + .name = "ixp4xx_eth", + .id = IXP4XX_ETH_NPEB, + .dev = { + .platform_data = &vulcan_plat_eth[0], + }, + }, + [1] = { + .name = "ixp4xx_eth", + .id = IXP4XX_ETH_NPEC, + .dev = { + .platform_data = &vulcan_plat_eth[1], + }, + }, +}; + +static struct resource vulcan_max6369_resource = { + .flags = IORESOURCE_MEM, +}; + +static struct platform_device vulcan_max6369 = { + .name = "max6369_wdt", + .id = -1, + .resource = &vulcan_max6369_resource, + .num_resources = 1, +}; + +static struct w1_gpio_platform_data vulcan_w1_gpio_pdata = { + .pin = 14, + .ext_pullup_enable_pin = -EINVAL, +}; + +static struct platform_device vulcan_w1_gpio = { + .name = "w1-gpio", + .id = 0, + .dev = { + .platform_data = &vulcan_w1_gpio_pdata, + }, +}; + +static struct platform_device *vulcan_devices[] __initdata = { + &vulcan_uart, + &vulcan_flash, + &vulcan_sram, + &vulcan_max6369, + &vulcan_eth[0], + &vulcan_eth[1], + &vulcan_w1_gpio, +}; + +static void __init vulcan_init(void) +{ + ixp4xx_sys_init(); + + /* Flash is spread over both CS0 and CS1 */ + vulcan_flash_resource.start = IXP4XX_EXP_BUS_BASE(0); + vulcan_flash_resource.end = IXP4XX_EXP_BUS_BASE(0) + SZ_32M - 1; + *IXP4XX_EXP_CS0 = IXP4XX_EXP_BUS_CS_EN | + IXP4XX_EXP_BUS_STROBE_T(3) | + IXP4XX_EXP_BUS_SIZE(0xF) | + IXP4XX_EXP_BUS_BYTE_RD16 | + IXP4XX_EXP_BUS_WR_EN; + *IXP4XX_EXP_CS1 = *IXP4XX_EXP_CS0; + + /* SRAM on CS2, (256kB, 8bit, writable) */ + vulcan_sram_resource.start = IXP4XX_EXP_BUS_BASE(2); + vulcan_sram_resource.end = IXP4XX_EXP_BUS_BASE(2) + SZ_256K - 1; + *IXP4XX_EXP_CS2 = IXP4XX_EXP_BUS_CS_EN | + IXP4XX_EXP_BUS_STROBE_T(1) | + IXP4XX_EXP_BUS_HOLD_T(2) | + IXP4XX_EXP_BUS_SIZE(9) | + IXP4XX_EXP_BUS_SPLT_EN | + IXP4XX_EXP_BUS_WR_EN | + IXP4XX_EXP_BUS_BYTE_EN; + + /* XR16L2551 on CS3 (Moto style, 512 bytes, 8bits, writable) */ + vulcan_uart_resources[2].start = IXP4XX_EXP_BUS_BASE(3); + vulcan_uart_resources[2].end = IXP4XX_EXP_BUS_BASE(3) + 16 - 1; + vulcan_uart_data[2].mapbase = vulcan_uart_resources[2].start; + vulcan_uart_data[3].mapbase = vulcan_uart_data[2].mapbase + 8; + *IXP4XX_EXP_CS3 = IXP4XX_EXP_BUS_CS_EN | + IXP4XX_EXP_BUS_STROBE_T(3) | + IXP4XX_EXP_BUS_CYCLES(IXP4XX_EXP_BUS_CYCLES_MOTOROLA)| + IXP4XX_EXP_BUS_WR_EN | + IXP4XX_EXP_BUS_BYTE_EN; + + /* GPIOS on CS4 (512 bytes, 8bits, writable) */ + *IXP4XX_EXP_CS4 = IXP4XX_EXP_BUS_CS_EN | + IXP4XX_EXP_BUS_WR_EN | + IXP4XX_EXP_BUS_BYTE_EN; + + /* max6369 on CS5 (512 bytes, 8bits, writable) */ + vulcan_max6369_resource.start = IXP4XX_EXP_BUS_BASE(5); + vulcan_max6369_resource.end = IXP4XX_EXP_BUS_BASE(5); + *IXP4XX_EXP_CS5 = IXP4XX_EXP_BUS_CS_EN | + IXP4XX_EXP_BUS_WR_EN | + IXP4XX_EXP_BUS_BYTE_EN; + + platform_add_devices(vulcan_devices, ARRAY_SIZE(vulcan_devices)); +} + +MACHINE_START(ARCOM_VULCAN, "Arcom/Eurotech Vulcan") + /* Maintainer: Marc Zyngier <maz@misterjones.org> */ + .map_io = ixp4xx_map_io, + .init_early = ixp4xx_init_early, + .init_irq = ixp4xx_init_irq, + .init_time = ixp4xx_timer_init, + .atag_offset = 0x100, + .init_machine = vulcan_init, +#if defined(CONFIG_PCI) + .dma_zone_size = SZ_64M, +#endif + .restart = ixp4xx_restart, +MACHINE_END diff --git a/kernel/arch/arm/mach-ixp4xx/wg302v2-pci.c b/kernel/arch/arm/mach-ixp4xx/wg302v2-pci.c new file mode 100644 index 000000000..c92e5b82a --- /dev/null +++ b/kernel/arch/arm/mach-ixp4xx/wg302v2-pci.c @@ -0,0 +1,62 @@ +/* + * arch/arch/mach-ixp4xx/wg302v2-pci.c + * + * PCI setup routines for the Netgear WG302 v2 and WAG302 v2 + * + * Copyright (C) 2007 Imre Kaloz <kaloz@openwrt.org> + * + * based on coyote-pci.c: + * Copyright (C) 2002 Jungo Software Technologies. + * Copyright (C) 2003 MontaVista Software, Inc. + * + * Maintainer: Imre Kaloz <kaloz@openwrt.org> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + */ + +#include <linux/kernel.h> +#include <linux/pci.h> +#include <linux/init.h> +#include <linux/irq.h> + +#include <asm/mach-types.h> +#include <mach/hardware.h> + +#include <asm/mach/pci.h> + +void __init wg302v2_pci_preinit(void) +{ + irq_set_irq_type(IRQ_IXP4XX_GPIO8, IRQ_TYPE_LEVEL_LOW); + irq_set_irq_type(IRQ_IXP4XX_GPIO9, IRQ_TYPE_LEVEL_LOW); + + ixp4xx_pci_preinit(); +} + +static int __init wg302v2_map_irq(const struct pci_dev *dev, u8 slot, u8 pin) +{ + if (slot == 1) + return IRQ_IXP4XX_GPIO8; + else if (slot == 2) + return IRQ_IXP4XX_GPIO9; + else return -1; +} + +struct hw_pci wg302v2_pci __initdata = { + .nr_controllers = 1, + .ops = &ixp4xx_ops, + .preinit = wg302v2_pci_preinit, + .setup = ixp4xx_setup, + .map_irq = wg302v2_map_irq, +}; + +int __init wg302v2_pci_init(void) +{ + if (machine_is_wg302v2()) + pci_common_init(&wg302v2_pci); + return 0; +} + +subsys_initcall(wg302v2_pci_init); diff --git a/kernel/arch/arm/mach-ixp4xx/wg302v2-setup.c b/kernel/arch/arm/mach-ixp4xx/wg302v2-setup.c new file mode 100644 index 000000000..8f9ea2f3a --- /dev/null +++ b/kernel/arch/arm/mach-ixp4xx/wg302v2-setup.c @@ -0,0 +1,111 @@ +/* + * arch/arm/mach-ixp4xx/wg302-setup.c + * + * Board setup for the Netgear WG302 v2 and WAG302 v2 + * + * Copyright (C) 2007 Imre Kaloz <Kaloz@openwrt.org> + * + * based on coyote-setup.c: + * Copyright (C) 2003-2005 MontaVista Software, Inc. + * + * Author: Imre Kaloz <kaloz@openwrt.org> + * + */ + +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/device.h> +#include <linux/serial.h> +#include <linux/tty.h> +#include <linux/serial_8250.h> + +#include <asm/types.h> +#include <asm/setup.h> +#include <asm/memory.h> +#include <mach/hardware.h> +#include <asm/irq.h> +#include <asm/mach-types.h> +#include <asm/mach/arch.h> +#include <asm/mach/flash.h> + +static struct flash_platform_data wg302v2_flash_data = { + .map_name = "cfi_probe", + .width = 2, +}; + +static struct resource wg302v2_flash_resource = { + .flags = IORESOURCE_MEM, +}; + +static struct platform_device wg302v2_flash = { + .name = "IXP4XX-Flash", + .id = 0, + .dev = { + .platform_data = &wg302v2_flash_data, + }, + .num_resources = 1, + .resource = &wg302v2_flash_resource, +}; + +static struct resource wg302v2_uart_resource = { + .start = IXP4XX_UART2_BASE_PHYS, + .end = IXP4XX_UART2_BASE_PHYS + 0x0fff, + .flags = IORESOURCE_MEM, +}; + +static struct plat_serial8250_port wg302v2_uart_data[] = { + { + .mapbase = IXP4XX_UART2_BASE_PHYS, + .membase = (char *)IXP4XX_UART2_BASE_VIRT + REG_OFFSET, + .irq = IRQ_IXP4XX_UART2, + .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST, + .iotype = UPIO_MEM, + .regshift = 2, + .uartclk = IXP4XX_UART_XTAL, + }, + { }, +}; + +static struct platform_device wg302v2_uart = { + .name = "serial8250", + .id = PLAT8250_DEV_PLATFORM, + .dev = { + .platform_data = wg302v2_uart_data, + }, + .num_resources = 1, + .resource = &wg302v2_uart_resource, +}; + +static struct platform_device *wg302v2_devices[] __initdata = { + &wg302v2_flash, + &wg302v2_uart, +}; + +static void __init wg302v2_init(void) +{ + ixp4xx_sys_init(); + + wg302v2_flash_resource.start = IXP4XX_EXP_BUS_BASE(0); + wg302v2_flash_resource.end = IXP4XX_EXP_BUS_BASE(0) + SZ_32M - 1; + + *IXP4XX_EXP_CS0 |= IXP4XX_FLASH_WRITABLE; + *IXP4XX_EXP_CS1 = *IXP4XX_EXP_CS0; + + platform_add_devices(wg302v2_devices, ARRAY_SIZE(wg302v2_devices)); +} + +#ifdef CONFIG_MACH_WG302V2 +MACHINE_START(WG302V2, "Netgear WG302 v2 / WAG302 v2") + /* Maintainer: Imre Kaloz <kaloz@openwrt.org> */ + .map_io = ixp4xx_map_io, + .init_early = ixp4xx_init_early, + .init_irq = ixp4xx_init_irq, + .init_time = ixp4xx_timer_init, + .atag_offset = 0x100, + .init_machine = wg302v2_init, +#if defined(CONFIG_PCI) + .dma_zone_size = SZ_64M, +#endif + .restart = ixp4xx_restart, +MACHINE_END +#endif |