summaryrefslogtreecommitdiffstats
path: root/kernel/arch/arm/mach-ixp4xx/Kconfig
diff options
context:
space:
mode:
Diffstat (limited to 'kernel/arch/arm/mach-ixp4xx/Kconfig')
-rw-r--r--kernel/arch/arm/mach-ixp4xx/Kconfig240
1 files changed, 240 insertions, 0 deletions
diff --git a/kernel/arch/arm/mach-ixp4xx/Kconfig b/kernel/arch/arm/mach-ixp4xx/Kconfig
new file mode 100644
index 000000000..c342dc4e8
--- /dev/null
+++ b/kernel/arch/arm/mach-ixp4xx/Kconfig
@@ -0,0 +1,240 @@
+if ARCH_IXP4XX
+
+menu "Intel IXP4xx Implementation Options"
+
+comment "IXP4xx Platforms"
+
+config MACH_NSLU2
+ bool
+ prompt "Linksys NSLU2"
+ select PCI
+ help
+ Say 'Y' here if you want your kernel to support Linksys's
+ NSLU2 NAS device. For more information on this platform,
+ see http://www.nslu2-linux.org
+
+config MACH_AVILA
+ bool "Avila"
+ select PCI
+ help
+ Say 'Y' here if you want your kernel to support the Gateworks
+ Avila Network Platform. For more information on this platform,
+ see <file:Documentation/arm/IXP4xx>.
+
+config MACH_LOFT
+ bool "Loft"
+ depends on MACH_AVILA
+ help
+ Say 'Y' here if you want your kernel to support the Giant
+ Shoulder Inc Loft board (a minor variation on the standard
+ Gateworks Avila Network Platform).
+
+config ARCH_ADI_COYOTE
+ bool "Coyote"
+ select PCI
+ help
+ Say 'Y' here if you want your kernel to support the ADI
+ Engineering Coyote Gateway Reference Platform. For more
+ information on this platform, see <file:Documentation/arm/IXP4xx>.
+
+config MACH_GATEWAY7001
+ bool "Gateway 7001"
+ select PCI
+ help
+ Say 'Y' here if you want your kernel to support Gateway's
+ 7001 Access Point. For more information on this platform,
+ see http://openwrt.org
+
+config MACH_WG302V2
+ bool "Netgear WG302 v2 / WAG302 v2"
+ select PCI
+ help
+ Say 'Y' here if you want your kernel to support Netgear's
+ WG302 v2 or WAG302 v2 Access Points. For more information
+ on this platform, see http://openwrt.org
+
+config ARCH_IXDP425
+ bool "IXDP425"
+ help
+ Say 'Y' here if you want your kernel to support Intel's
+ IXDP425 Development Platform (Also known as Richfield).
+ For more information on this platform, see <file:Documentation/arm/IXP4xx>.
+
+config MACH_IXDPG425
+ bool "IXDPG425"
+ help
+ Say 'Y' here if you want your kernel to support Intel's
+ IXDPG425 Development Platform (Also known as Montajade).
+ For more information on this platform, see <file:Documentation/arm/IXP4xx>.
+
+config MACH_IXDP465
+ bool "IXDP465"
+ help
+ Say 'Y' here if you want your kernel to support Intel's
+ IXDP465 Development Platform (Also known as BMP).
+ For more information on this platform, see <file:Documentation/arm/IXP4xx>.
+
+config MACH_GORAMO_MLR
+ bool "GORAMO Multi Link Router"
+ help
+ Say 'Y' here if you want your kernel to support GORAMO
+ MultiLink router.
+
+config MACH_KIXRP435
+ bool "KIXRP435"
+ help
+ Say 'Y' here if you want your kernel to support Intel's
+ KIXRP435 Reference Platform.
+ For more information on this platform, see <file:Documentation/arm/IXP4xx>.
+
+#
+# IXCDP1100 is the exact same HW as IXDP425, but with a different machine
+# number from the bootloader due to marketing monkeys, so we just enable it
+# by default if IXDP425 is enabled.
+#
+config ARCH_IXCDP1100
+ bool
+ depends on ARCH_IXDP425
+ default y
+
+config ARCH_PRPMC1100
+ bool "PrPMC1100"
+ help
+ Say 'Y' here if you want your kernel to support the Motorola
+ PrPCM1100 Processor Mezanine Module. For more information on
+ this platform, see <file:Documentation/arm/IXP4xx>.
+
+config MACH_NAS100D
+ bool
+ prompt "NAS100D"
+ select PCI
+ help
+ Say 'Y' here if you want your kernel to support Iomega's
+ NAS 100d device. For more information on this platform,
+ see http://www.nslu2-linux.org/wiki/NAS100d/HomePage
+
+config MACH_DSMG600
+ bool
+ prompt "D-Link DSM-G600 RevA"
+ select PCI
+ help
+ Say 'Y' here if you want your kernel to support D-Link's
+ DSM-G600 RevA device. For more information on this platform,
+ see http://www.nslu2-linux.org/wiki/DSMG600/HomePage
+
+config ARCH_IXDP4XX
+ bool
+ depends on ARCH_IXDP425 || MACH_IXDP465 || MACH_KIXRP435
+ default y
+
+config MACH_FSG
+ bool
+ prompt "Freecom FSG-3"
+ select PCI
+ help
+ Say 'Y' here if you want your kernel to support Freecom's
+ FSG-3 device. For more information on this platform,
+ see http://www.nslu2-linux.org/wiki/FSG3/HomePage
+
+config MACH_ARCOM_VULCAN
+ bool
+ prompt "Arcom/Eurotech Vulcan"
+ select PCI
+ help
+ Say 'Y' here if you want your kernel to support Arcom's
+ Vulcan board.
+
+#
+# Certain registers and IRQs are only enabled if supporting IXP465 CPUs
+#
+config CPU_IXP46X
+ bool
+ depends on MACH_IXDP465
+ default y
+
+config CPU_IXP43X
+ bool
+ depends on MACH_KIXRP435
+ default y
+
+config MACH_GTWX5715
+ bool "Gemtek WX5715 (Linksys WRV54G)"
+ depends on ARCH_IXP4XX
+ select PCI
+ help
+ This board is currently inside the Linksys WRV54G Gateways.
+
+ IXP425 - 266mhz
+ 32mb SDRAM
+ 8mb Flash
+ miniPCI slot 0 does not have a card connector soldered to the board
+ miniPCI slot 1 has an ISL3880 802.11g card (Prism54)
+ npe0 is connected to a Kendin KS8995M Switch (4 ports)
+ npe1 is the "wan" port
+ "Console" UART is available on J11 as console
+ "High Speed" UART is n/c (as far as I can tell)
+ 20 Pin ARM/Xscale JTAG interface on J2
+
+config MACH_DEVIXP
+ bool "Omicron DEVIXP"
+ help
+ Say 'Y' here if you want your kernel to support the DEVIXP
+ board from OMICRON electronics GmbH.
+
+config MACH_MICCPT
+ bool "Omicron MICCPT"
+ select PCI
+ help
+ Say 'Y' here if you want your kernel to support the MICCPT
+ board from OMICRON electronics GmbH.
+
+config MACH_MIC256
+ bool "Omicron MIC256"
+ help
+ Say 'Y' here if you want your kernel to support the MIC256
+ board from OMICRON electronics GmbH.
+
+comment "IXP4xx Options"
+
+config IXP4XX_INDIRECT_PCI
+ bool "Use indirect PCI memory access"
+ depends on PCI
+ help
+ IXP4xx provides two methods of accessing PCI memory space:
+
+ 1) A direct mapped window from 0x48000000 to 0x4BFFFFFF (64MB).
+ To access PCI via this space, we simply ioremap() the BAR
+ into the kernel and we can use the standard read[bwl]/write[bwl]
+ macros. This is the preferred method due to speed but it
+ limits the system to just 64MB of PCI memory. This can be
+ problematic if using video cards and other memory-heavy devices.
+
+ 2) If > 64MB of memory space is required, the IXP4xx can be
+ configured to use indirect registers to access the whole PCI
+ memory space. This currently allows for up to 1 GB (0x10000000
+ to 0x4FFFFFFF) of memory on the bus. The disadvantage of this
+ is that every PCI access requires three local register accesses
+ plus a spinlock, but in some cases the performance hit is
+ acceptable. In addition, you cannot mmap() PCI devices in this
+ case due to the indirect nature of the PCI window.
+
+ By default, the direct method is used. Choose this option if you
+ need to use the indirect method instead. If you don't know
+ what you need, leave this option unselected.
+
+config IXP4XX_QMGR
+ tristate "IXP4xx Queue Manager support"
+ help
+ This driver supports IXP4xx built-in hardware queue manager
+ and is automatically selected by Ethernet and HSS drivers.
+
+config IXP4XX_NPE
+ tristate "IXP4xx Network Processor Engine support"
+ select FW_LOADER
+ help
+ This driver supports IXP4xx built-in network coprocessors
+ and is automatically selected by Ethernet and HSS drivers.
+
+endmenu
+
+endif