diff options
Diffstat (limited to 'kernel/arch/arm/mach-iop32x/iq31244.c')
| -rw-r--r-- | kernel/arch/arm/mach-iop32x/iq31244.c | 333 |
1 files changed, 333 insertions, 0 deletions
diff --git a/kernel/arch/arm/mach-iop32x/iq31244.c b/kernel/arch/arm/mach-iop32x/iq31244.c new file mode 100644 index 000000000..0e1392b20 --- /dev/null +++ b/kernel/arch/arm/mach-iop32x/iq31244.c @@ -0,0 +1,333 @@ +/* + * arch/arm/mach-iop32x/iq31244.c + * + * Board support code for the Intel EP80219 and IQ31244 platforms. + * + * Author: Rory Bolt <rorybolt@pacbell.net> + * Copyright (C) 2002 Rory Bolt + * Copyright 2003 (c) MontaVista, Software, Inc. + * Copyright (C) 2004 Intel Corp. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +#include <linux/mm.h> +#include <linux/init.h> +#include <linux/delay.h> +#include <linux/kernel.h> +#include <linux/pci.h> +#include <linux/pm.h> +#include <linux/string.h> +#include <linux/serial_core.h> +#include <linux/serial_8250.h> +#include <linux/mtd/physmap.h> +#include <linux/platform_device.h> +#include <linux/io.h> +#include <mach/hardware.h> +#include <asm/cputype.h> +#include <asm/irq.h> +#include <asm/mach/arch.h> +#include <asm/mach/map.h> +#include <asm/mach/pci.h> +#include <asm/mach/time.h> +#include <asm/mach-types.h> +#include <asm/page.h> +#include <asm/pgtable.h> +#include <mach/time.h> +#include "gpio-iop32x.h" + +/* + * Until March of 2007 iq31244 platforms and ep80219 platforms shared the + * same machine id, and the processor type was used to select board type. + * However this assumption breaks for an iq80219 board which is an iop219 + * processor on an iq31244 board. The force_ep80219 flag has been added + * for old boot loaders using the iq31244 machine id for an ep80219 platform. + */ +static int force_ep80219; + +static int is_80219(void) +{ + return !!((read_cpuid_id() & 0xffffffe0) == 0x69052e20); +} + +static int is_ep80219(void) +{ + if (machine_is_ep80219() || force_ep80219) + return 1; + else + return 0; +} + + +/* + * EP80219/IQ31244 timer tick configuration. + */ +static void __init iq31244_timer_init(void) +{ + if (is_ep80219()) { + /* 33.333 MHz crystal. */ + iop_init_time(200000000); + } else { + /* 33.000 MHz crystal. */ + iop_init_time(198000000); + } +} + + +/* + * IQ31244 I/O. + */ +static struct map_desc iq31244_io_desc[] __initdata = { + { /* on-board devices */ + .virtual = IQ31244_UART, + .pfn = __phys_to_pfn(IQ31244_UART), + .length = 0x00100000, + .type = MT_DEVICE, + }, +}; + +void __init iq31244_map_io(void) +{ + iop3xx_map_io(); + iotable_init(iq31244_io_desc, ARRAY_SIZE(iq31244_io_desc)); +} + + +/* + * EP80219/IQ31244 PCI. + */ +static int __init +ep80219_pci_map_irq(const struct pci_dev *dev, u8 slot, u8 pin) +{ + int irq; + + if (slot == 0) { + /* CFlash */ + irq = IRQ_IOP32X_XINT1; + } else if (slot == 1) { + /* 82551 Pro 100 */ + irq = IRQ_IOP32X_XINT0; + } else if (slot == 2) { + /* PCI-X Slot */ + irq = IRQ_IOP32X_XINT3; + } else if (slot == 3) { + /* SATA */ + irq = IRQ_IOP32X_XINT2; + } else { + printk(KERN_ERR "ep80219_pci_map_irq() called for unknown " + "device PCI:%d:%d:%d\n", dev->bus->number, + PCI_SLOT(dev->devfn), PCI_FUNC(dev->devfn)); + irq = -1; + } + + return irq; +} + +static struct hw_pci ep80219_pci __initdata = { + .nr_controllers = 1, + .ops = &iop3xx_ops, + .setup = iop3xx_pci_setup, + .preinit = iop3xx_pci_preinit, + .map_irq = ep80219_pci_map_irq, +}; + +static int __init +iq31244_pci_map_irq(const struct pci_dev *dev, u8 slot, u8 pin) +{ + int irq; + + if (slot == 0) { + /* CFlash */ + irq = IRQ_IOP32X_XINT1; + } else if (slot == 1) { + /* SATA */ + irq = IRQ_IOP32X_XINT2; + } else if (slot == 2) { + /* PCI-X Slot */ + irq = IRQ_IOP32X_XINT3; + } else if (slot == 3) { + /* 82546 GigE */ + irq = IRQ_IOP32X_XINT0; + } else { + printk(KERN_ERR "iq31244_pci_map_irq called for unknown " + "device PCI:%d:%d:%d\n", dev->bus->number, + PCI_SLOT(dev->devfn), PCI_FUNC(dev->devfn)); + irq = -1; + } + + return irq; +} + +static struct hw_pci iq31244_pci __initdata = { + .nr_controllers = 1, + .ops = &iop3xx_ops, + .setup = iop3xx_pci_setup, + .preinit = iop3xx_pci_preinit, + .map_irq = iq31244_pci_map_irq, +}; + +static int __init iq31244_pci_init(void) +{ + if (is_ep80219()) + pci_common_init(&ep80219_pci); + else if (machine_is_iq31244()) { + if (is_80219()) { + printk("note: iq31244 board type has been selected\n"); + printk("note: to select ep80219 operation:\n"); + printk("\t1/ specify \"force_ep80219\" on the kernel" + " command line\n"); + printk("\t2/ update boot loader to pass" + " the ep80219 id: %d\n", MACH_TYPE_EP80219); + } + pci_common_init(&iq31244_pci); + } + + return 0; +} + +subsys_initcall(iq31244_pci_init); + + +/* + * IQ31244 machine initialisation. + */ +static struct physmap_flash_data iq31244_flash_data = { + .width = 2, +}; + +static struct resource iq31244_flash_resource = { + .start = 0xf0000000, + .end = 0xf07fffff, + .flags = IORESOURCE_MEM, +}; + +static struct platform_device iq31244_flash_device = { + .name = "physmap-flash", + .id = 0, + .dev = { + .platform_data = &iq31244_flash_data, + }, + .num_resources = 1, + .resource = &iq31244_flash_resource, +}; + +static struct plat_serial8250_port iq31244_serial_port[] = { + { + .mapbase = IQ31244_UART, + .membase = (char *)IQ31244_UART, + .irq = IRQ_IOP32X_XINT1, + .flags = UPF_SKIP_TEST, + .iotype = UPIO_MEM, + .regshift = 0, + .uartclk = 1843200, + }, + { }, +}; + +static struct resource iq31244_uart_resource = { + .start = IQ31244_UART, + .end = IQ31244_UART + 7, + .flags = IORESOURCE_MEM, +}; + +static struct platform_device iq31244_serial_device = { + .name = "serial8250", + .id = PLAT8250_DEV_PLATFORM, + .dev = { + .platform_data = iq31244_serial_port, + }, + .num_resources = 1, + .resource = &iq31244_uart_resource, +}; + +/* + * This function will send a SHUTDOWN_COMPLETE message to the PIC + * controller over I2C. We are not using the i2c subsystem since + * we are going to power off and it may be removed + */ +void ep80219_power_off(void) +{ + /* + * Send the Address byte w/ the start condition + */ + *IOP3XX_IDBR1 = 0x60; + *IOP3XX_ICR1 = 0xE9; + mdelay(1); + + /* + * Send the START_MSG byte w/ no start or stop condition + */ + *IOP3XX_IDBR1 = 0x0F; + *IOP3XX_ICR1 = 0xE8; + mdelay(1); + + /* + * Send the SHUTDOWN_COMPLETE Message ID byte w/ no start or + * stop condition + */ + *IOP3XX_IDBR1 = 0x03; + *IOP3XX_ICR1 = 0xE8; + mdelay(1); + + /* + * Send an ignored byte w/ stop condition + */ + *IOP3XX_IDBR1 = 0x00; + *IOP3XX_ICR1 = 0xEA; + + while (1) + ; +} + +static void __init iq31244_init_machine(void) +{ + register_iop32x_gpio(); + platform_device_register(&iop3xx_i2c0_device); + platform_device_register(&iop3xx_i2c1_device); + platform_device_register(&iq31244_flash_device); + platform_device_register(&iq31244_serial_device); + platform_device_register(&iop3xx_dma_0_channel); + platform_device_register(&iop3xx_dma_1_channel); + + if (is_ep80219()) + pm_power_off = ep80219_power_off; + + if (!is_80219()) + platform_device_register(&iop3xx_aau_channel); +} + +static int __init force_ep80219_setup(char *str) +{ + force_ep80219 = 1; + return 1; +} + +__setup("force_ep80219", force_ep80219_setup); + +MACHINE_START(IQ31244, "Intel IQ31244") + /* Maintainer: Intel Corp. */ + .atag_offset = 0x100, + .map_io = iq31244_map_io, + .init_irq = iop32x_init_irq, + .init_time = iq31244_timer_init, + .init_machine = iq31244_init_machine, + .restart = iop3xx_restart, +MACHINE_END + +/* There should have been an ep80219 machine identifier from the beginning. + * Boot roms older than March 2007 do not know the ep80219 machine id. Pass + * "force_ep80219" on the kernel command line, otherwise iq31244 operation + * will be selected. + */ +MACHINE_START(EP80219, "Intel EP80219") + /* Maintainer: Intel Corp. */ + .atag_offset = 0x100, + .map_io = iq31244_map_io, + .init_irq = iop32x_init_irq, + .init_time = iq31244_timer_init, + .init_machine = iq31244_init_machine, + .restart = iop3xx_restart, +MACHINE_END |