summaryrefslogtreecommitdiffstats
path: root/kernel/arch/arm/mach-footbridge/include/mach/hardware.h
diff options
context:
space:
mode:
Diffstat (limited to 'kernel/arch/arm/mach-footbridge/include/mach/hardware.h')
-rw-r--r--kernel/arch/arm/mach-footbridge/include/mach/hardware.h99
1 files changed, 99 insertions, 0 deletions
diff --git a/kernel/arch/arm/mach-footbridge/include/mach/hardware.h b/kernel/arch/arm/mach-footbridge/include/mach/hardware.h
new file mode 100644
index 000000000..02f6d7a70
--- /dev/null
+++ b/kernel/arch/arm/mach-footbridge/include/mach/hardware.h
@@ -0,0 +1,99 @@
+/*
+ * arch/arm/mach-footbridge/include/mach/hardware.h
+ *
+ * Copyright (C) 1998-1999 Russell King.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This file contains the hardware definitions of the EBSA-285.
+ */
+#ifndef __ASM_ARCH_HARDWARE_H
+#define __ASM_ARCH_HARDWARE_H
+
+/* Virtual Physical Size
+ * 0xff800000 0x40000000 1MB X-Bus
+ * 0xff000000 0x7c000000 1MB PCI I/O space
+ * 0xfe000000 0x42000000 1MB CSR
+ * 0xfd000000 0x78000000 1MB Outbound write flush (not supported)
+ * 0xfc000000 0x79000000 1MB PCI IACK/special space
+ * 0xfb000000 0x7a000000 16MB PCI Config type 1
+ * 0xfa000000 0x7b000000 16MB PCI Config type 0
+ * 0xf9000000 0x50000000 1MB Cache flush
+ * 0xf0000000 0x80000000 16MB ISA memory
+ */
+
+#ifdef CONFIG_MMU
+#define MMU_IO(a, b) (a)
+#else
+#define MMU_IO(a, b) (b)
+#endif
+
+#define XBUS_SIZE 0x00100000
+#define XBUS_BASE MMU_IO(0xff800000, 0x40000000)
+
+#define ARMCSR_SIZE 0x00100000
+#define ARMCSR_BASE MMU_IO(0xfe000000, 0x42000000)
+
+#define WFLUSH_SIZE 0x00100000
+#define WFLUSH_BASE MMU_IO(0xfd000000, 0x78000000)
+
+#define PCIIACK_SIZE 0x00100000
+#define PCIIACK_BASE MMU_IO(0xfc000000, 0x79000000)
+
+#define PCICFG1_SIZE 0x01000000
+#define PCICFG1_BASE MMU_IO(0xfb000000, 0x7a000000)
+
+#define PCICFG0_SIZE 0x01000000
+#define PCICFG0_BASE MMU_IO(0xfa000000, 0x7b000000)
+
+#define PCIMEM_SIZE 0x01000000
+#define PCIMEM_BASE MMU_IO(0xf0000000, 0x80000000)
+
+#define XBUS_CS2 0x40012000
+
+#define XBUS_SWITCH ((volatile unsigned char *)(XBUS_BASE + 0x12000))
+#define XBUS_SWITCH_SWITCH ((*XBUS_SWITCH) & 15)
+#define XBUS_SWITCH_J17_13 ((*XBUS_SWITCH) & (1 << 4))
+#define XBUS_SWITCH_J17_11 ((*XBUS_SWITCH) & (1 << 5))
+#define XBUS_SWITCH_J17_9 ((*XBUS_SWITCH) & (1 << 6))
+
+#define UNCACHEABLE_ADDR (ARMCSR_BASE + 0x108)
+
+
+/* PIC irq control */
+#define PIC_LO 0x20
+#define PIC_MASK_LO 0x21
+#define PIC_HI 0xA0
+#define PIC_MASK_HI 0xA1
+
+/* GPIO pins */
+#define GPIO_CCLK 0x800
+#define GPIO_DSCLK 0x400
+#define GPIO_E2CLK 0x200
+#define GPIO_IOLOAD 0x100
+#define GPIO_RED_LED 0x080
+#define GPIO_WDTIMER 0x040
+#define GPIO_DATA 0x020
+#define GPIO_IOCLK 0x010
+#define GPIO_DONE 0x008
+#define GPIO_FAN 0x004
+#define GPIO_GREEN_LED 0x002
+#define GPIO_RESET 0x001
+
+/* CPLD pins */
+#define CPLD_DS_ENABLE 8
+#define CPLD_7111_DISABLE 4
+#define CPLD_UNMUTE 2
+#define CPLD_FLASH_WR_ENABLE 1
+
+#ifndef __ASSEMBLY__
+extern raw_spinlock_t nw_gpio_lock;
+extern void nw_gpio_modify_op(unsigned int mask, unsigned int set);
+extern void nw_gpio_modify_io(unsigned int mask, unsigned int in);
+extern unsigned int nw_gpio_read(void);
+extern void nw_cpld_modify(unsigned int mask, unsigned int set);
+#endif
+
+#endif