summaryrefslogtreecommitdiffstats
path: root/kernel/arch/arm/mach-bcm
diff options
context:
space:
mode:
Diffstat (limited to 'kernel/arch/arm/mach-bcm')
-rw-r--r--kernel/arch/arm/mach-bcm/Kconfig20
-rw-r--r--kernel/arch/arm/mach-bcm/Makefile10
-rw-r--r--kernel/arch/arm/mach-bcm/bcm63xx_pmb.c221
-rw-r--r--kernel/arch/arm/mach-bcm/bcm63xx_smp.c169
-rw-r--r--kernel/arch/arm/mach-bcm/bcm63xx_smp.h8
-rw-r--r--kernel/arch/arm/mach-bcm/bcm_5301x.c11
-rw-r--r--kernel/arch/arm/mach-bcm/bcm_kona_smc.c2
-rw-r--r--kernel/arch/arm/mach-bcm/bcm_nsp.c25
-rw-r--r--kernel/arch/arm/mach-bcm/board_bcm2835.c91
-rw-r--r--kernel/arch/arm/mach-bcm/brcmstb.c9
10 files changed, 466 insertions, 100 deletions
diff --git a/kernel/arch/arm/mach-bcm/Kconfig b/kernel/arch/arm/mach-bcm/Kconfig
index 8b11f44bb..8c53c55be 100644
--- a/kernel/arch/arm/mach-bcm/Kconfig
+++ b/kernel/arch/arm/mach-bcm/Kconfig
@@ -14,7 +14,7 @@ config ARCH_BCM_IPROC
select HAVE_ARM_SCU if SMP
select HAVE_ARM_TWD if SMP
select ARM_GLOBAL_TIMER
-
+ select COMMON_CLK_IPROC
select CLKSRC_MMIO
select ARCH_REQUIRE_GPIOLIB
select ARM_AMBA
@@ -35,6 +35,20 @@ config ARCH_BCM_CYGNUS
BCM11300, BCM11320, BCM11350, BCM11360,
BCM58300, BCM58302, BCM58303, BCM58305.
+config ARCH_BCM_NSP
+ bool "Broadcom Northstar Plus SoC Support" if ARCH_MULTI_V7
+ select ARCH_BCM_IPROC
+ select ARM_ERRATA_754322
+ select ARM_ERRATA_775420
+ help
+ Support for Broadcom Northstar Plus SoC.
+ Broadcom Northstar Plus family of SoCs are used for switching control
+ and management applications as well as residential router/gateway
+ applications. The SoC features dual core Cortex A9 ARM CPUs,
+ integrating several peripheral interfaces including multiple Gigabit
+ Ethernet PHYs, DDR3 memory, PCIE Gen-2, USB 2.0 and USB 3.0, serial and
+ NAND flash, SATA and several other IO controllers.
+
config ARCH_BCM_5301X
bool "Broadcom BCM470X / BCM5301X ARM SoC" if ARCH_MULTI_V7
select ARCH_BCM_IPROC
@@ -140,10 +154,14 @@ config ARCH_BCM_63XX
config ARCH_BRCMSTB
bool "Broadcom BCM7XXX based boards" if ARCH_MULTI_V7
select ARM_GIC
+ select ARM_ERRATA_798181 if SMP
select HAVE_ARM_ARCH_TIMER
select BRCMSTB_GISB_ARB
select BRCMSTB_L2_IRQ
select BCM7120_L2_IRQ
+ select ARCH_DMA_ADDR_T_64BIT if ARM_LPAE
+ select ARCH_WANT_OPTIONAL_GPIOLIB
+ select SOC_BRCMSTB
help
Say Y if you intend to run the kernel on a Broadcom ARM-based STB
chipset.
diff --git a/kernel/arch/arm/mach-bcm/Makefile b/kernel/arch/arm/mach-bcm/Makefile
index 54d274da7..892261fec 100644
--- a/kernel/arch/arm/mach-bcm/Makefile
+++ b/kernel/arch/arm/mach-bcm/Makefile
@@ -1,5 +1,5 @@
#
-# Copyright (C) 2012-2014 Broadcom Corporation
+# Copyright (C) 2012-2015 Broadcom Corporation
#
# This program is free software; you can redistribute it and/or
# modify it under the terms of the GNU General Public License as
@@ -13,6 +13,9 @@
# Cygnus
obj-$(CONFIG_ARCH_BCM_CYGNUS) += bcm_cygnus.o
+# Northstar Plus
+obj-$(CONFIG_ARCH_BCM_NSP) += bcm_nsp.o
+
# BCM281XX
obj-$(CONFIG_ARCH_BCM_281XX) += board_bcm281xx.o
@@ -38,7 +41,10 @@ obj-$(CONFIG_ARCH_BCM2835) += board_bcm2835.o
obj-$(CONFIG_ARCH_BCM_5301X) += bcm_5301x.o
# BCM63XXx
-obj-$(CONFIG_ARCH_BCM_63XX) := bcm63xx.o
+ifeq ($(CONFIG_ARCH_BCM_63XX),y)
+obj-y += bcm63xx.o
+obj-$(CONFIG_SMP) += bcm63xx_smp.o bcm63xx_pmb.o
+endif
ifeq ($(CONFIG_ARCH_BRCMSTB),y)
CFLAGS_platsmp-brcmstb.o += -march=armv7-a
diff --git a/kernel/arch/arm/mach-bcm/bcm63xx_pmb.c b/kernel/arch/arm/mach-bcm/bcm63xx_pmb.c
new file mode 100644
index 000000000..de061ec5a
--- /dev/null
+++ b/kernel/arch/arm/mach-bcm/bcm63xx_pmb.c
@@ -0,0 +1,221 @@
+/*
+ * Broadcom BCM63138 PMB initialization for secondary CPU(s)
+ *
+ * Copyright (C) 2015 Broadcom Corporation
+ * Author: Florian Fainelli <f.fainelli@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+#include <linux/kernel.h>
+#include <linux/io.h>
+#include <linux/spinlock.h>
+#include <linux/reset/bcm63xx_pmb.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+
+#include "bcm63xx_smp.h"
+
+/* ARM Control register definitions */
+#define CORE_PWR_CTRL_SHIFT 0
+#define CORE_PWR_CTRL_MASK 0x3
+#define PLL_PWR_ON BIT(8)
+#define PLL_LDO_PWR_ON BIT(9)
+#define PLL_CLAMP_ON BIT(10)
+#define CPU_RESET_N(x) BIT(13 + (x))
+#define NEON_RESET_N BIT(15)
+#define PWR_CTRL_STATUS_SHIFT 28
+#define PWR_CTRL_STATUS_MASK 0x3
+#define PWR_DOWN_SHIFT 30
+#define PWR_DOWN_MASK 0x3
+
+/* CPU Power control register definitions */
+#define MEM_PWR_OK BIT(0)
+#define MEM_PWR_ON BIT(1)
+#define MEM_CLAMP_ON BIT(2)
+#define MEM_PWR_OK_STATUS BIT(4)
+#define MEM_PWR_ON_STATUS BIT(5)
+#define MEM_PDA_SHIFT 8
+#define MEM_PDA_MASK 0xf
+#define MEM_PDA_CPU_MASK 0x1
+#define MEM_PDA_NEON_MASK 0xf
+#define CLAMP_ON BIT(15)
+#define PWR_OK_SHIFT 16
+#define PWR_OK_MASK 0xf
+#define PWR_ON_SHIFT 20
+#define PWR_CPU_MASK 0x03
+#define PWR_NEON_MASK 0x01
+#define PWR_ON_MASK 0xf
+#define PWR_OK_STATUS_SHIFT 24
+#define PWR_OK_STATUS_MASK 0xf
+#define PWR_ON_STATUS_SHIFT 28
+#define PWR_ON_STATUS_MASK 0xf
+
+#define ARM_CONTROL 0x30
+#define ARM_PWR_CONTROL_BASE 0x34
+#define ARM_PWR_CONTROL(x) (ARM_PWR_CONTROL_BASE + (x) * 0x4)
+#define ARM_NEON_L2 0x3c
+
+/* Perform a value write, then spin until the value shifted by
+ * shift is seen, masked with mask and is different from cond.
+ */
+static int bpcm_wr_rd_mask(void __iomem *master,
+ unsigned int addr, u32 off, u32 *val,
+ u32 shift, u32 mask, u32 cond)
+{
+ int ret;
+
+ ret = bpcm_wr(master, addr, off, *val);
+ if (ret)
+ return ret;
+
+ do {
+ ret = bpcm_rd(master, addr, off, val);
+ if (ret)
+ return ret;
+
+ cpu_relax();
+ } while (((*val >> shift) & mask) != cond);
+
+ return ret;
+}
+
+/* Global lock to serialize accesses to the PMB registers while we
+ * are bringing up the secondary CPU
+ */
+static DEFINE_SPINLOCK(pmb_lock);
+
+static int bcm63xx_pmb_get_resources(struct device_node *dn,
+ void __iomem **base,
+ unsigned int *cpu,
+ unsigned int *addr)
+{
+ struct device_node *pmb_dn;
+ struct of_phandle_args args;
+ int ret;
+
+ ret = of_property_read_u32(dn, "reg", cpu);
+ if (ret) {
+ pr_err("CPU is missing a reg node\n");
+ return ret;
+ }
+
+ ret = of_parse_phandle_with_args(dn, "resets", "#reset-cells",
+ 0, &args);
+ if (ret) {
+ pr_err("CPU is missing a resets phandle\n");
+ return ret;
+ }
+
+ pmb_dn = args.np;
+ if (args.args_count != 2) {
+ pr_err("reset-controller does not conform to reset-cells\n");
+ return -EINVAL;
+ }
+
+ *base = of_iomap(args.np, 0);
+ if (!*base) {
+ pr_err("failed remapping PMB register\n");
+ return -ENOMEM;
+ }
+
+ /* We do not need the number of zones */
+ *addr = args.args[0];
+
+ return 0;
+}
+
+int bcm63xx_pmb_power_on_cpu(struct device_node *dn)
+{
+ void __iomem *base;
+ unsigned int cpu, addr;
+ unsigned long flags;
+ u32 val, ctrl;
+ int ret;
+
+ ret = bcm63xx_pmb_get_resources(dn, &base, &cpu, &addr);
+ if (ret)
+ return ret;
+
+ /* We would not know how to enable a third and greater CPU */
+ WARN_ON(cpu > 1);
+
+ spin_lock_irqsave(&pmb_lock, flags);
+
+ /* Check if the CPU is already on and save the ARM_CONTROL register
+ * value since we will use it later for CPU de-assert once done with
+ * the CPU-specific power sequence
+ */
+ ret = bpcm_rd(base, addr, ARM_CONTROL, &ctrl);
+ if (ret)
+ goto out;
+
+ if (ctrl & CPU_RESET_N(cpu)) {
+ pr_info("PMB: CPU%d is already powered on\n", cpu);
+ ret = 0;
+ goto out;
+ }
+
+ /* Power on PLL */
+ ret = bpcm_rd(base, addr, ARM_PWR_CONTROL(cpu), &val);
+ if (ret)
+ goto out;
+
+ val |= (PWR_CPU_MASK << PWR_ON_SHIFT);
+
+ ret = bpcm_wr_rd_mask(base, addr, ARM_PWR_CONTROL(cpu), &val,
+ PWR_ON_STATUS_SHIFT, PWR_CPU_MASK, PWR_CPU_MASK);
+ if (ret)
+ goto out;
+
+ val |= (PWR_CPU_MASK << PWR_OK_SHIFT);
+
+ ret = bpcm_wr_rd_mask(base, addr, ARM_PWR_CONTROL(cpu), &val,
+ PWR_OK_STATUS_SHIFT, PWR_CPU_MASK, PWR_CPU_MASK);
+ if (ret)
+ goto out;
+
+ val &= ~CLAMP_ON;
+
+ ret = bpcm_wr(base, addr, ARM_PWR_CONTROL(cpu), val);
+ if (ret)
+ goto out;
+
+ /* Power on CPU<N> RAM */
+ val &= ~(MEM_PDA_MASK << MEM_PDA_SHIFT);
+
+ ret = bpcm_wr(base, addr, ARM_PWR_CONTROL(cpu), val);
+ if (ret)
+ goto out;
+
+ val |= MEM_PWR_ON;
+
+ ret = bpcm_wr_rd_mask(base, addr, ARM_PWR_CONTROL(cpu), &val,
+ 0, MEM_PWR_ON_STATUS, MEM_PWR_ON_STATUS);
+ if (ret)
+ goto out;
+
+ val |= MEM_PWR_OK;
+
+ ret = bpcm_wr_rd_mask(base, addr, ARM_PWR_CONTROL(cpu), &val,
+ 0, MEM_PWR_OK_STATUS, MEM_PWR_OK_STATUS);
+ if (ret)
+ goto out;
+
+ val &= ~MEM_CLAMP_ON;
+
+ ret = bpcm_wr(base, addr, ARM_PWR_CONTROL(cpu), val);
+ if (ret)
+ goto out;
+
+ /* De-assert CPU reset */
+ ctrl |= CPU_RESET_N(cpu);
+
+ ret = bpcm_wr(base, addr, ARM_CONTROL, ctrl);
+out:
+ spin_unlock_irqrestore(&pmb_lock, flags);
+ iounmap(base);
+ return ret;
+}
diff --git a/kernel/arch/arm/mach-bcm/bcm63xx_smp.c b/kernel/arch/arm/mach-bcm/bcm63xx_smp.c
new file mode 100644
index 000000000..19be90421
--- /dev/null
+++ b/kernel/arch/arm/mach-bcm/bcm63xx_smp.c
@@ -0,0 +1,169 @@
+/*
+ * Broadcom BCM63138 DSL SoCs SMP support code
+ *
+ * Copyright (C) 2015, Broadcom Corporation
+ *
+ * Licensed under the terms of the GPLv2
+ */
+
+#include <linux/delay.h>
+#include <linux/init.h>
+#include <linux/smp.h>
+#include <linux/io.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+
+#include <asm/cacheflush.h>
+#include <asm/smp_scu.h>
+#include <asm/smp_plat.h>
+#include <asm/vfp.h>
+
+#include "bcm63xx_smp.h"
+
+/* Size of mapped Cortex A9 SCU address space */
+#define CORTEX_A9_SCU_SIZE 0x58
+
+/*
+ * Enable the Cortex A9 Snoop Control Unit
+ *
+ * By the time this is called we already know there are multiple
+ * cores present. We assume we're running on a Cortex A9 processor,
+ * so any trouble getting the base address register or getting the
+ * SCU base is a problem.
+ *
+ * Return 0 if successful or an error code otherwise.
+ */
+static int __init scu_a9_enable(void)
+{
+ unsigned long config_base;
+ void __iomem *scu_base;
+ unsigned int i, ncores;
+
+ if (!scu_a9_has_base()) {
+ pr_err("no configuration base address register!\n");
+ return -ENXIO;
+ }
+
+ /* Config base address register value is zero for uniprocessor */
+ config_base = scu_a9_get_base();
+ if (!config_base) {
+ pr_err("hardware reports only one core\n");
+ return -ENOENT;
+ }
+
+ scu_base = ioremap((phys_addr_t)config_base, CORTEX_A9_SCU_SIZE);
+ if (!scu_base) {
+ pr_err("failed to remap config base (%lu/%u) for SCU\n",
+ config_base, CORTEX_A9_SCU_SIZE);
+ return -ENOMEM;
+ }
+
+ scu_enable(scu_base);
+
+ ncores = scu_base ? scu_get_core_count(scu_base) : 1;
+
+ if (ncores > nr_cpu_ids) {
+ pr_warn("SMP: %u cores greater than maximum (%u), clipping\n",
+ ncores, nr_cpu_ids);
+ ncores = nr_cpu_ids;
+ }
+
+ /* The BCM63138 SoC has two Cortex-A9 CPUs, CPU0 features a complete
+ * and fully functional VFP unit that can be used, but CPU1 does not.
+ * Since we will not be able to trap kernel-mode NEON to force
+ * migration to CPU0, just do not advertise VFP support at all.
+ *
+ * This will make vfp_init bail out and do not attempt to use VFP at
+ * all, for kernel-mode NEON, we do not want to introduce any
+ * conditionals in hot-paths, so we just restrict the system to UP.
+ */
+#ifdef CONFIG_VFP
+ if (ncores > 1) {
+ pr_warn("SMP: secondary CPUs lack VFP unit, disabling VFP\n");
+ vfp_disable();
+
+#ifdef CONFIG_KERNEL_MODE_NEON
+ WARN(1, "SMP: kernel-mode NEON enabled, restricting to UP\n");
+ ncores = 1;
+#endif
+ }
+#endif
+
+ for (i = 0; i < ncores; i++)
+ set_cpu_possible(i, true);
+
+ iounmap(scu_base); /* That's the last we'll need of this */
+
+ return 0;
+}
+
+static const struct of_device_id bcm63138_bootlut_ids[] = {
+ { .compatible = "brcm,bcm63138-bootlut", },
+ { /* sentinel */ },
+};
+
+#define BOOTLUT_RESET_VECT 0x20
+
+static int bcm63138_smp_boot_secondary(unsigned int cpu,
+ struct task_struct *idle)
+{
+ void __iomem *bootlut_base;
+ struct device_node *dn;
+ int ret = 0;
+ u32 val;
+
+ dn = of_find_matching_node(NULL, bcm63138_bootlut_ids);
+ if (!dn) {
+ pr_err("SMP: unable to find bcm63138 boot LUT node\n");
+ return -ENODEV;
+ }
+
+ bootlut_base = of_iomap(dn, 0);
+ of_node_put(dn);
+
+ if (!bootlut_base) {
+ pr_err("SMP: unable to remap boot LUT base register\n");
+ return -ENOMEM;
+ }
+
+ /* Locate the secondary CPU node */
+ dn = of_get_cpu_node(cpu, NULL);
+ if (!dn) {
+ pr_err("SMP: failed to locate secondary CPU%d node\n", cpu);
+ ret = -ENODEV;
+ goto out;
+ }
+
+ /* Write the secondary init routine to the BootLUT reset vector */
+ val = virt_to_phys(secondary_startup);
+ writel_relaxed(val, bootlut_base + BOOTLUT_RESET_VECT);
+
+ /* Power up the core, will jump straight to its reset vector when we
+ * return
+ */
+ ret = bcm63xx_pmb_power_on_cpu(dn);
+ if (ret)
+ goto out;
+out:
+ iounmap(bootlut_base);
+
+ return ret;
+}
+
+static void __init bcm63138_smp_prepare_cpus(unsigned int max_cpus)
+{
+ int ret;
+
+ ret = scu_a9_enable();
+ if (ret) {
+ pr_warn("SMP: Cortex-A9 SCU setup failed\n");
+ return;
+ }
+}
+
+struct smp_operations bcm63138_smp_ops __initdata = {
+ .smp_prepare_cpus = bcm63138_smp_prepare_cpus,
+ .smp_boot_secondary = bcm63138_smp_boot_secondary,
+};
+
+CPU_METHOD_OF_DECLARE(bcm63138_smp, "brcm,bcm63138", &bcm63138_smp_ops);
diff --git a/kernel/arch/arm/mach-bcm/bcm63xx_smp.h b/kernel/arch/arm/mach-bcm/bcm63xx_smp.h
new file mode 100644
index 000000000..9c6d50e2b
--- /dev/null
+++ b/kernel/arch/arm/mach-bcm/bcm63xx_smp.h
@@ -0,0 +1,8 @@
+#ifndef __BCM63XX_SMP_H
+#define __BCM63XX_SMP_H
+
+struct device_node;
+
+extern int bcm63xx_pmb_power_on_cpu(struct device_node *dn);
+
+#endif /* __BCM63XX_SMP_H */
diff --git a/kernel/arch/arm/mach-bcm/bcm_5301x.c b/kernel/arch/arm/mach-bcm/bcm_5301x.c
index e9bcbdbce..5478fe6bc 100644
--- a/kernel/arch/arm/mach-bcm/bcm_5301x.c
+++ b/kernel/arch/arm/mach-bcm/bcm_5301x.c
@@ -18,15 +18,16 @@ static bool first_fault = true;
static int bcm5301x_abort_handler(unsigned long addr, unsigned int fsr,
struct pt_regs *regs)
{
- if (fsr == 0x1c06 && first_fault) {
+ if ((fsr == 0x1406 || fsr == 0x1c06) && first_fault) {
first_fault = false;
/*
- * These faults with code 0x1c06 happens for no good reason,
- * possibly left over from the CFE boot loader.
+ * These faults with codes 0x1406 (BCM4709) or 0x1c06 happens
+ * for no good reason, possibly left over from the CFE boot
+ * loader.
*/
pr_warn("External imprecise Data abort at addr=%#lx, fsr=%#x ignored.\n",
- addr, fsr);
+ addr, fsr);
/* Returning non-zero causes fault display and panic */
return 0;
@@ -43,7 +44,7 @@ static void __init bcm5301x_init_early(void)
"imprecise external abort");
}
-static const char __initconst *bcm5301x_dt_compat[] = {
+static const char *const bcm5301x_dt_compat[] __initconst = {
"brcm,bcm4708",
NULL,
};
diff --git a/kernel/arch/arm/mach-bcm/bcm_kona_smc.c b/kernel/arch/arm/mach-bcm/bcm_kona_smc.c
index a55a7ecf1..cf3f8658f 100644
--- a/kernel/arch/arm/mach-bcm/bcm_kona_smc.c
+++ b/kernel/arch/arm/mach-bcm/bcm_kona_smc.c
@@ -33,7 +33,7 @@ struct bcm_kona_smc_data {
unsigned result;
};
-static const struct of_device_id bcm_kona_smc_ids[] __initconst = {
+static const struct of_device_id const bcm_kona_smc_ids[] __initconst = {
{.compatible = "brcm,kona-smc"},
{.compatible = "bcm,kona-smc"}, /* deprecated name */
{},
diff --git a/kernel/arch/arm/mach-bcm/bcm_nsp.c b/kernel/arch/arm/mach-bcm/bcm_nsp.c
new file mode 100644
index 000000000..a1101a3d3
--- /dev/null
+++ b/kernel/arch/arm/mach-bcm/bcm_nsp.c
@@ -0,0 +1,25 @@
+/*
+ * Copyright (C) 2015 Broadcom Corporation
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation version 2.
+ *
+ * This program is distributed "as is" WITHOUT ANY WARRANTY of any
+ * kind, whether express or implied; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <asm/mach/arch.h>
+
+static const char *const bcm_nsp_dt_compat[] __initconst = {
+ "brcm,nsp",
+ NULL,
+};
+
+DT_MACHINE_START(NSP_DT, "Broadcom Northstar Plus SoC")
+ .l2c_aux_val = 0,
+ .l2c_aux_mask = ~0,
+ .dt_compat = bcm_nsp_dt_compat,
+MACHINE_END
diff --git a/kernel/arch/arm/mach-bcm/board_bcm2835.c b/kernel/arch/arm/mach-bcm/board_bcm2835.c
index 70f2f3925..0f7b9eac3 100644
--- a/kernel/arch/arm/mach-bcm/board_bcm2835.c
+++ b/kernel/arch/arm/mach-bcm/board_bcm2835.c
@@ -12,7 +12,6 @@
* GNU General Public License for more details.
*/
-#include <linux/delay.h>
#include <linux/init.h>
#include <linux/irqchip.h>
#include <linux/of_address.h>
@@ -22,97 +21,10 @@
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
-#define PM_RSTC 0x1c
-#define PM_RSTS 0x20
-#define PM_WDOG 0x24
-
-#define PM_PASSWORD 0x5a000000
-#define PM_RSTC_WRCFG_MASK 0x00000030
-#define PM_RSTC_WRCFG_FULL_RESET 0x00000020
-#define PM_RSTS_HADWRH_SET 0x00000040
-
-#define BCM2835_PERIPH_PHYS 0x20000000
-#define BCM2835_PERIPH_VIRT 0xf0000000
-#define BCM2835_PERIPH_SIZE SZ_16M
-
-static void __iomem *wdt_regs;
-
-/*
- * The machine restart method can be called from an atomic context so we won't
- * be able to ioremap the regs then.
- */
-static void bcm2835_setup_restart(void)
-{
- struct device_node *np = of_find_compatible_node(NULL, NULL,
- "brcm,bcm2835-pm-wdt");
- if (WARN(!np, "unable to setup watchdog restart"))
- return;
-
- wdt_regs = of_iomap(np, 0);
- WARN(!wdt_regs, "failed to remap watchdog regs");
-}
-
-static void bcm2835_restart(enum reboot_mode mode, const char *cmd)
-{
- u32 val;
-
- if (!wdt_regs)
- return;
-
- /* use a timeout of 10 ticks (~150us) */
- writel_relaxed(10 | PM_PASSWORD, wdt_regs + PM_WDOG);
- val = readl_relaxed(wdt_regs + PM_RSTC);
- val &= ~PM_RSTC_WRCFG_MASK;
- val |= PM_PASSWORD | PM_RSTC_WRCFG_FULL_RESET;
- writel_relaxed(val, wdt_regs + PM_RSTC);
-
- /* No sleeping, possibly atomic. */
- mdelay(1);
-}
-
-/*
- * We can't really power off, but if we do the normal reset scheme, and
- * indicate to bootcode.bin not to reboot, then most of the chip will be
- * powered off.
- */
-static void bcm2835_power_off(void)
-{
- u32 val;
-
- /*
- * We set the watchdog hard reset bit here to distinguish this reset
- * from the normal (full) reset. bootcode.bin will not reboot after a
- * hard reset.
- */
- val = readl_relaxed(wdt_regs + PM_RSTS);
- val &= ~PM_RSTC_WRCFG_MASK;
- val |= PM_PASSWORD | PM_RSTS_HADWRH_SET;
- writel_relaxed(val, wdt_regs + PM_RSTS);
-
- /* Continue with normal reset mechanism */
- bcm2835_restart(REBOOT_HARD, "");
-}
-
-static struct map_desc io_map __initdata = {
- .virtual = BCM2835_PERIPH_VIRT,
- .pfn = __phys_to_pfn(BCM2835_PERIPH_PHYS),
- .length = BCM2835_PERIPH_SIZE,
- .type = MT_DEVICE
-};
-
-static void __init bcm2835_map_io(void)
-{
- iotable_init(&io_map, 1);
-}
-
static void __init bcm2835_init(void)
{
int ret;
- bcm2835_setup_restart();
- if (wdt_regs)
- pm_power_off = bcm2835_power_off;
-
bcm2835_init_clocks();
ret = of_platform_populate(NULL, of_default_bus_match_table, NULL,
@@ -129,9 +41,6 @@ static const char * const bcm2835_compat[] = {
};
DT_MACHINE_START(BCM2835, "BCM2835")
- .map_io = bcm2835_map_io,
- .init_irq = irqchip_init,
.init_machine = bcm2835_init,
- .restart = bcm2835_restart,
.dt_compat = bcm2835_compat
MACHINE_END
diff --git a/kernel/arch/arm/mach-bcm/brcmstb.c b/kernel/arch/arm/mach-bcm/brcmstb.c
index 3a60f7ee3..99a67cfb7 100644
--- a/kernel/arch/arm/mach-bcm/brcmstb.c
+++ b/kernel/arch/arm/mach-bcm/brcmstb.c
@@ -12,11 +12,19 @@
*/
#include <linux/init.h>
+#include <linux/irqchip.h>
#include <linux/of_platform.h>
+#include <linux/soc/brcmstb/brcmstb.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
+static void __init brcmstb_init_irq(void)
+{
+ irqchip_init();
+ brcmstb_biuctrl_init();
+}
+
static const char *const brcmstb_match[] __initconst = {
"brcm,bcm7445",
"brcm,brcmstb",
@@ -25,4 +33,5 @@ static const char *const brcmstb_match[] __initconst = {
DT_MACHINE_START(BRCMSTB, "Broadcom STB (Flattened Device Tree)")
.dt_compat = brcmstb_match,
+ .init_irq = brcmstb_init_irq,
MACHINE_END