summaryrefslogtreecommitdiffstats
path: root/kernel/arch/arm/include/asm/hardware/locomo.h
diff options
context:
space:
mode:
Diffstat (limited to 'kernel/arch/arm/include/asm/hardware/locomo.h')
-rw-r--r--kernel/arch/arm/include/asm/hardware/locomo.h221
1 files changed, 221 insertions, 0 deletions
diff --git a/kernel/arch/arm/include/asm/hardware/locomo.h b/kernel/arch/arm/include/asm/hardware/locomo.h
new file mode 100644
index 000000000..74e51d6bd
--- /dev/null
+++ b/kernel/arch/arm/include/asm/hardware/locomo.h
@@ -0,0 +1,221 @@
+/*
+ * arch/arm/include/asm/hardware/locomo.h
+ *
+ * This file contains the definitions for the LoCoMo G/A Chip
+ *
+ * (C) Copyright 2004 John Lenz
+ *
+ * May be copied or modified under the terms of the GNU General Public
+ * License. See linux/COPYING for more information.
+ *
+ * Based on sa1111.h
+ */
+#ifndef _ASM_ARCH_LOCOMO
+#define _ASM_ARCH_LOCOMO
+
+#define locomo_writel(val,addr) ({ *(volatile u16 *)(addr) = (val); })
+#define locomo_readl(addr) (*(volatile u16 *)(addr))
+
+/* LOCOMO version */
+#define LOCOMO_VER 0x00
+
+/* Pin status */
+#define LOCOMO_ST 0x04
+
+/* Pin status */
+#define LOCOMO_C32K 0x08
+
+/* Interrupt controller */
+#define LOCOMO_ICR 0x0C
+
+/* MCS decoder for boot selecting */
+#define LOCOMO_MCSX0 0x10
+#define LOCOMO_MCSX1 0x14
+#define LOCOMO_MCSX2 0x18
+#define LOCOMO_MCSX3 0x1c
+
+/* Touch panel controller */
+#define LOCOMO_ASD 0x20 /* AD start delay */
+#define LOCOMO_HSD 0x28 /* HSYS delay */
+#define LOCOMO_HSC 0x2c /* HSYS period */
+#define LOCOMO_TADC 0x30 /* tablet ADC clock */
+
+
+/* Long time timer */
+#define LOCOMO_LTC 0xd8 /* LTC interrupt setting */
+#define LOCOMO_LTINT 0xdc /* LTC interrupt */
+
+/* DAC control signal for LCD (COMADJ ) */
+#define LOCOMO_DAC 0xe0
+/* DAC control */
+#define LOCOMO_DAC_SCLOEB 0x08 /* SCL pin output data */
+#define LOCOMO_DAC_TEST 0x04 /* Test bit */
+#define LOCOMO_DAC_SDA 0x02 /* SDA pin level (read-only) */
+#define LOCOMO_DAC_SDAOEB 0x01 /* SDA pin output data */
+
+/* SPI interface */
+#define LOCOMO_SPI 0x60
+#define LOCOMO_SPIMD 0x00 /* SPI mode setting */
+#define LOCOMO_SPICT 0x04 /* SPI mode control */
+#define LOCOMO_SPIST 0x08 /* SPI status */
+#define LOCOMO_SPI_TEND (1 << 3) /* Transfer end bit */
+#define LOCOMO_SPI_REND (1 << 2) /* Receive end bit */
+#define LOCOMO_SPI_RFW (1 << 1) /* write buffer bit */
+#define LOCOMO_SPI_RFR (1) /* read buffer bit */
+
+#define LOCOMO_SPIIS 0x10 /* SPI interrupt status */
+#define LOCOMO_SPIWE 0x14 /* SPI interrupt status write enable */
+#define LOCOMO_SPIIE 0x18 /* SPI interrupt enable */
+#define LOCOMO_SPIIR 0x1c /* SPI interrupt request */
+#define LOCOMO_SPITD 0x20 /* SPI transfer data write */
+#define LOCOMO_SPIRD 0x24 /* SPI receive data read */
+#define LOCOMO_SPITS 0x28 /* SPI transfer data shift */
+#define LOCOMO_SPIRS 0x2C /* SPI receive data shift */
+
+/* GPIO */
+#define LOCOMO_GPD 0x90 /* GPIO direction */
+#define LOCOMO_GPE 0x94 /* GPIO input enable */
+#define LOCOMO_GPL 0x98 /* GPIO level */
+#define LOCOMO_GPO 0x9c /* GPIO out data setting */
+#define LOCOMO_GRIE 0xa0 /* GPIO rise detection */
+#define LOCOMO_GFIE 0xa4 /* GPIO fall detection */
+#define LOCOMO_GIS 0xa8 /* GPIO edge detection status */
+#define LOCOMO_GWE 0xac /* GPIO status write enable */
+#define LOCOMO_GIE 0xb0 /* GPIO interrupt enable */
+#define LOCOMO_GIR 0xb4 /* GPIO interrupt request */
+#define LOCOMO_GPIO(Nb) (0x01 << (Nb))
+#define LOCOMO_GPIO_RTS LOCOMO_GPIO(0)
+#define LOCOMO_GPIO_CTS LOCOMO_GPIO(1)
+#define LOCOMO_GPIO_DSR LOCOMO_GPIO(2)
+#define LOCOMO_GPIO_DTR LOCOMO_GPIO(3)
+#define LOCOMO_GPIO_LCD_VSHA_ON LOCOMO_GPIO(4)
+#define LOCOMO_GPIO_LCD_VSHD_ON LOCOMO_GPIO(5)
+#define LOCOMO_GPIO_LCD_VEE_ON LOCOMO_GPIO(6)
+#define LOCOMO_GPIO_LCD_MOD LOCOMO_GPIO(7)
+#define LOCOMO_GPIO_DAC_ON LOCOMO_GPIO(8)
+#define LOCOMO_GPIO_FL_VR LOCOMO_GPIO(9)
+#define LOCOMO_GPIO_DAC_SDATA LOCOMO_GPIO(10)
+#define LOCOMO_GPIO_DAC_SCK LOCOMO_GPIO(11)
+#define LOCOMO_GPIO_DAC_SLOAD LOCOMO_GPIO(12)
+#define LOCOMO_GPIO_CARD_DETECT LOCOMO_GPIO(13)
+#define LOCOMO_GPIO_WRITE_PROT LOCOMO_GPIO(14)
+#define LOCOMO_GPIO_CARD_POWER LOCOMO_GPIO(15)
+
+/* Start the definitions of the devices. Each device has an initial
+ * base address and a series of offsets from that base address. */
+
+/* Keyboard controller */
+#define LOCOMO_KEYBOARD 0x40
+#define LOCOMO_KIB 0x00 /* KIB level */
+#define LOCOMO_KSC 0x04 /* KSTRB control */
+#define LOCOMO_KCMD 0x08 /* KSTRB command */
+#define LOCOMO_KIC 0x0c /* Key interrupt */
+
+/* Front light adjustment controller */
+#define LOCOMO_FRONTLIGHT 0xc8
+#define LOCOMO_ALS 0x00 /* Adjust light cycle */
+#define LOCOMO_ALD 0x04 /* Adjust light duty */
+
+#define LOCOMO_ALC_EN 0x8000
+
+/* Backlight controller: TFT signal */
+#define LOCOMO_BACKLIGHT 0x38
+#define LOCOMO_TC 0x00 /* TFT control signal */
+#define LOCOMO_CPSD 0x04 /* CPS delay */
+
+/* Audio controller */
+#define LOCOMO_AUDIO 0x54
+#define LOCOMO_ACC 0x00 /* Audio clock */
+#define LOCOMO_PAIF 0xD0 /* PCM audio interface */
+/* Audio clock */
+#define LOCOMO_ACC_XON 0x80
+#define LOCOMO_ACC_XEN 0x40
+#define LOCOMO_ACC_XSEL0 0x00
+#define LOCOMO_ACC_XSEL1 0x20
+#define LOCOMO_ACC_MCLKEN 0x10
+#define LOCOMO_ACC_64FSEN 0x08
+#define LOCOMO_ACC_CLKSEL000 0x00 /* mclk 2 */
+#define LOCOMO_ACC_CLKSEL001 0x01 /* mclk 3 */
+#define LOCOMO_ACC_CLKSEL010 0x02 /* mclk 4 */
+#define LOCOMO_ACC_CLKSEL011 0x03 /* mclk 6 */
+#define LOCOMO_ACC_CLKSEL100 0x04 /* mclk 8 */
+#define LOCOMO_ACC_CLKSEL101 0x05 /* mclk 12 */
+/* PCM audio interface */
+#define LOCOMO_PAIF_SCINV 0x20
+#define LOCOMO_PAIF_SCEN 0x10
+#define LOCOMO_PAIF_LRCRST 0x08
+#define LOCOMO_PAIF_LRCEVE 0x04
+#define LOCOMO_PAIF_LRCINV 0x02
+#define LOCOMO_PAIF_LRCEN 0x01
+
+/* LED controller */
+#define LOCOMO_LED 0xe8
+#define LOCOMO_LPT0 0x00
+#define LOCOMO_LPT1 0x04
+/* LED control */
+#define LOCOMO_LPT_TOFH 0x80
+#define LOCOMO_LPT_TOFL 0x08
+#define LOCOMO_LPT_TOH(TOH) ((TOH & 0x7) << 4)
+#define LOCOMO_LPT_TOL(TOL) ((TOL & 0x7))
+
+extern struct bus_type locomo_bus_type;
+
+#define LOCOMO_DEVID_KEYBOARD 0
+#define LOCOMO_DEVID_FRONTLIGHT 1
+#define LOCOMO_DEVID_BACKLIGHT 2
+#define LOCOMO_DEVID_AUDIO 3
+#define LOCOMO_DEVID_LED 4
+#define LOCOMO_DEVID_UART 5
+#define LOCOMO_DEVID_SPI 6
+
+struct locomo_dev {
+ struct device dev;
+ unsigned int devid;
+ unsigned int irq[1];
+
+ void *mapbase;
+ unsigned long length;
+
+ u64 dma_mask;
+};
+
+#define LOCOMO_DEV(_d) container_of((_d), struct locomo_dev, dev)
+
+#define locomo_get_drvdata(d) dev_get_drvdata(&(d)->dev)
+#define locomo_set_drvdata(d,p) dev_set_drvdata(&(d)->dev, p)
+
+struct locomo_driver {
+ struct device_driver drv;
+ unsigned int devid;
+ int (*probe)(struct locomo_dev *);
+ int (*remove)(struct locomo_dev *);
+ int (*suspend)(struct locomo_dev *, pm_message_t);
+ int (*resume)(struct locomo_dev *);
+};
+
+#define LOCOMO_DRV(_d) container_of((_d), struct locomo_driver, drv)
+
+#define LOCOMO_DRIVER_NAME(_ldev) ((_ldev)->dev.driver->name)
+
+void locomo_lcd_power(struct locomo_dev *, int, unsigned int);
+
+int locomo_driver_register(struct locomo_driver *);
+void locomo_driver_unregister(struct locomo_driver *);
+
+/* GPIO control functions */
+void locomo_gpio_set_dir(struct device *dev, unsigned int bits, unsigned int dir);
+int locomo_gpio_read_level(struct device *dev, unsigned int bits);
+int locomo_gpio_read_output(struct device *dev, unsigned int bits);
+void locomo_gpio_write(struct device *dev, unsigned int bits, unsigned int set);
+
+/* M62332 control function */
+void locomo_m62332_senddata(struct locomo_dev *ldev, unsigned int dac_data, int channel);
+
+/* Frontlight control */
+void locomo_frontlight_set(struct locomo_dev *dev, int duty, int vr, int bpwf);
+
+struct locomo_platform_data {
+ int irq_base; /* IRQ base for cascaded on-chip IRQs */
+};
+
+#endif