diff options
Diffstat (limited to 'kernel/arch/arm/crypto/sha256-armv4.pl')
-rw-r--r-- | kernel/arch/arm/crypto/sha256-armv4.pl | 716 |
1 files changed, 716 insertions, 0 deletions
diff --git a/kernel/arch/arm/crypto/sha256-armv4.pl b/kernel/arch/arm/crypto/sha256-armv4.pl new file mode 100644 index 000000000..fac0533ea --- /dev/null +++ b/kernel/arch/arm/crypto/sha256-armv4.pl @@ -0,0 +1,716 @@ +#!/usr/bin/env perl + +# ==================================================================== +# Written by Andy Polyakov <appro@openssl.org> for the OpenSSL +# project. The module is, however, dual licensed under OpenSSL and +# CRYPTOGAMS licenses depending on where you obtain it. For further +# details see http://www.openssl.org/~appro/cryptogams/. +# +# Permission to use under GPL terms is granted. +# ==================================================================== + +# SHA256 block procedure for ARMv4. May 2007. + +# Performance is ~2x better than gcc 3.4 generated code and in "abso- +# lute" terms is ~2250 cycles per 64-byte block or ~35 cycles per +# byte [on single-issue Xscale PXA250 core]. + +# July 2010. +# +# Rescheduling for dual-issue pipeline resulted in 22% improvement on +# Cortex A8 core and ~20 cycles per processed byte. + +# February 2011. +# +# Profiler-assisted and platform-specific optimization resulted in 16% +# improvement on Cortex A8 core and ~15.4 cycles per processed byte. + +# September 2013. +# +# Add NEON implementation. On Cortex A8 it was measured to process one +# byte in 12.5 cycles or 23% faster than integer-only code. Snapdragon +# S4 does it in 12.5 cycles too, but it's 50% faster than integer-only +# code (meaning that latter performs sub-optimally, nothing was done +# about it). + +# May 2014. +# +# Add ARMv8 code path performing at 2.0 cpb on Apple A7. + +while (($output=shift) && ($output!~/^\w[\w\-]*\.\w+$/)) {} +open STDOUT,">$output"; + +$ctx="r0"; $t0="r0"; +$inp="r1"; $t4="r1"; +$len="r2"; $t1="r2"; +$T1="r3"; $t3="r3"; +$A="r4"; +$B="r5"; +$C="r6"; +$D="r7"; +$E="r8"; +$F="r9"; +$G="r10"; +$H="r11"; +@V=($A,$B,$C,$D,$E,$F,$G,$H); +$t2="r12"; +$Ktbl="r14"; + +@Sigma0=( 2,13,22); +@Sigma1=( 6,11,25); +@sigma0=( 7,18, 3); +@sigma1=(17,19,10); + +sub BODY_00_15 { +my ($i,$a,$b,$c,$d,$e,$f,$g,$h) = @_; + +$code.=<<___ if ($i<16); +#if __ARM_ARCH__>=7 + @ ldr $t1,[$inp],#4 @ $i +# if $i==15 + str $inp,[sp,#17*4] @ make room for $t4 +# endif + eor $t0,$e,$e,ror#`$Sigma1[1]-$Sigma1[0]` + add $a,$a,$t2 @ h+=Maj(a,b,c) from the past + eor $t0,$t0,$e,ror#`$Sigma1[2]-$Sigma1[0]` @ Sigma1(e) +# ifndef __ARMEB__ + rev $t1,$t1 +# endif +#else + @ ldrb $t1,[$inp,#3] @ $i + add $a,$a,$t2 @ h+=Maj(a,b,c) from the past + ldrb $t2,[$inp,#2] + ldrb $t0,[$inp,#1] + orr $t1,$t1,$t2,lsl#8 + ldrb $t2,[$inp],#4 + orr $t1,$t1,$t0,lsl#16 +# if $i==15 + str $inp,[sp,#17*4] @ make room for $t4 +# endif + eor $t0,$e,$e,ror#`$Sigma1[1]-$Sigma1[0]` + orr $t1,$t1,$t2,lsl#24 + eor $t0,$t0,$e,ror#`$Sigma1[2]-$Sigma1[0]` @ Sigma1(e) +#endif +___ +$code.=<<___; + ldr $t2,[$Ktbl],#4 @ *K256++ + add $h,$h,$t1 @ h+=X[i] + str $t1,[sp,#`$i%16`*4] + eor $t1,$f,$g + add $h,$h,$t0,ror#$Sigma1[0] @ h+=Sigma1(e) + and $t1,$t1,$e + add $h,$h,$t2 @ h+=K256[i] + eor $t1,$t1,$g @ Ch(e,f,g) + eor $t0,$a,$a,ror#`$Sigma0[1]-$Sigma0[0]` + add $h,$h,$t1 @ h+=Ch(e,f,g) +#if $i==31 + and $t2,$t2,#0xff + cmp $t2,#0xf2 @ done? +#endif +#if $i<15 +# if __ARM_ARCH__>=7 + ldr $t1,[$inp],#4 @ prefetch +# else + ldrb $t1,[$inp,#3] +# endif + eor $t2,$a,$b @ a^b, b^c in next round +#else + ldr $t1,[sp,#`($i+2)%16`*4] @ from future BODY_16_xx + eor $t2,$a,$b @ a^b, b^c in next round + ldr $t4,[sp,#`($i+15)%16`*4] @ from future BODY_16_xx +#endif + eor $t0,$t0,$a,ror#`$Sigma0[2]-$Sigma0[0]` @ Sigma0(a) + and $t3,$t3,$t2 @ (b^c)&=(a^b) + add $d,$d,$h @ d+=h + eor $t3,$t3,$b @ Maj(a,b,c) + add $h,$h,$t0,ror#$Sigma0[0] @ h+=Sigma0(a) + @ add $h,$h,$t3 @ h+=Maj(a,b,c) +___ + ($t2,$t3)=($t3,$t2); +} + +sub BODY_16_XX { +my ($i,$a,$b,$c,$d,$e,$f,$g,$h) = @_; + +$code.=<<___; + @ ldr $t1,[sp,#`($i+1)%16`*4] @ $i + @ ldr $t4,[sp,#`($i+14)%16`*4] + mov $t0,$t1,ror#$sigma0[0] + add $a,$a,$t2 @ h+=Maj(a,b,c) from the past + mov $t2,$t4,ror#$sigma1[0] + eor $t0,$t0,$t1,ror#$sigma0[1] + eor $t2,$t2,$t4,ror#$sigma1[1] + eor $t0,$t0,$t1,lsr#$sigma0[2] @ sigma0(X[i+1]) + ldr $t1,[sp,#`($i+0)%16`*4] + eor $t2,$t2,$t4,lsr#$sigma1[2] @ sigma1(X[i+14]) + ldr $t4,[sp,#`($i+9)%16`*4] + + add $t2,$t2,$t0 + eor $t0,$e,$e,ror#`$Sigma1[1]-$Sigma1[0]` @ from BODY_00_15 + add $t1,$t1,$t2 + eor $t0,$t0,$e,ror#`$Sigma1[2]-$Sigma1[0]` @ Sigma1(e) + add $t1,$t1,$t4 @ X[i] +___ + &BODY_00_15(@_); +} + +$code=<<___; +#ifndef __KERNEL__ +# include "arm_arch.h" +#else +# define __ARM_ARCH__ __LINUX_ARM_ARCH__ +# define __ARM_MAX_ARCH__ 7 +#endif + +.text +#if __ARM_ARCH__<7 +.code 32 +#else +.syntax unified +# ifdef __thumb2__ +# define adrl adr +.thumb +# else +.code 32 +# endif +#endif + +.type K256,%object +.align 5 +K256: +.word 0x428a2f98,0x71374491,0xb5c0fbcf,0xe9b5dba5 +.word 0x3956c25b,0x59f111f1,0x923f82a4,0xab1c5ed5 +.word 0xd807aa98,0x12835b01,0x243185be,0x550c7dc3 +.word 0x72be5d74,0x80deb1fe,0x9bdc06a7,0xc19bf174 +.word 0xe49b69c1,0xefbe4786,0x0fc19dc6,0x240ca1cc +.word 0x2de92c6f,0x4a7484aa,0x5cb0a9dc,0x76f988da +.word 0x983e5152,0xa831c66d,0xb00327c8,0xbf597fc7 +.word 0xc6e00bf3,0xd5a79147,0x06ca6351,0x14292967 +.word 0x27b70a85,0x2e1b2138,0x4d2c6dfc,0x53380d13 +.word 0x650a7354,0x766a0abb,0x81c2c92e,0x92722c85 +.word 0xa2bfe8a1,0xa81a664b,0xc24b8b70,0xc76c51a3 +.word 0xd192e819,0xd6990624,0xf40e3585,0x106aa070 +.word 0x19a4c116,0x1e376c08,0x2748774c,0x34b0bcb5 +.word 0x391c0cb3,0x4ed8aa4a,0x5b9cca4f,0x682e6ff3 +.word 0x748f82ee,0x78a5636f,0x84c87814,0x8cc70208 +.word 0x90befffa,0xa4506ceb,0xbef9a3f7,0xc67178f2 +.size K256,.-K256 +.word 0 @ terminator +#if __ARM_MAX_ARCH__>=7 && !defined(__KERNEL__) +.LOPENSSL_armcap: +.word OPENSSL_armcap_P-sha256_block_data_order +#endif +.align 5 + +.global sha256_block_data_order +.type sha256_block_data_order,%function +sha256_block_data_order: +#if __ARM_ARCH__<7 + sub r3,pc,#8 @ sha256_block_data_order +#else + adr r3,sha256_block_data_order +#endif +#if __ARM_MAX_ARCH__>=7 && !defined(__KERNEL__) + ldr r12,.LOPENSSL_armcap + ldr r12,[r3,r12] @ OPENSSL_armcap_P + tst r12,#ARMV8_SHA256 + bne .LARMv8 + tst r12,#ARMV7_NEON + bne .LNEON +#endif + add $len,$inp,$len,lsl#6 @ len to point at the end of inp + stmdb sp!,{$ctx,$inp,$len,r4-r11,lr} + ldmia $ctx,{$A,$B,$C,$D,$E,$F,$G,$H} + sub $Ktbl,r3,#256+32 @ K256 + sub sp,sp,#16*4 @ alloca(X[16]) +.Loop: +# if __ARM_ARCH__>=7 + ldr $t1,[$inp],#4 +# else + ldrb $t1,[$inp,#3] +# endif + eor $t3,$B,$C @ magic + eor $t2,$t2,$t2 +___ +for($i=0;$i<16;$i++) { &BODY_00_15($i,@V); unshift(@V,pop(@V)); } +$code.=".Lrounds_16_xx:\n"; +for (;$i<32;$i++) { &BODY_16_XX($i,@V); unshift(@V,pop(@V)); } +$code.=<<___; +#if __ARM_ARCH__>=7 + ite eq @ Thumb2 thing, sanity check in ARM +#endif + ldreq $t3,[sp,#16*4] @ pull ctx + bne .Lrounds_16_xx + + add $A,$A,$t2 @ h+=Maj(a,b,c) from the past + ldr $t0,[$t3,#0] + ldr $t1,[$t3,#4] + ldr $t2,[$t3,#8] + add $A,$A,$t0 + ldr $t0,[$t3,#12] + add $B,$B,$t1 + ldr $t1,[$t3,#16] + add $C,$C,$t2 + ldr $t2,[$t3,#20] + add $D,$D,$t0 + ldr $t0,[$t3,#24] + add $E,$E,$t1 + ldr $t1,[$t3,#28] + add $F,$F,$t2 + ldr $inp,[sp,#17*4] @ pull inp + ldr $t2,[sp,#18*4] @ pull inp+len + add $G,$G,$t0 + add $H,$H,$t1 + stmia $t3,{$A,$B,$C,$D,$E,$F,$G,$H} + cmp $inp,$t2 + sub $Ktbl,$Ktbl,#256 @ rewind Ktbl + bne .Loop + + add sp,sp,#`16+3`*4 @ destroy frame +#if __ARM_ARCH__>=5 + ldmia sp!,{r4-r11,pc} +#else + ldmia sp!,{r4-r11,lr} + tst lr,#1 + moveq pc,lr @ be binary compatible with V4, yet + bx lr @ interoperable with Thumb ISA:-) +#endif +.size sha256_block_data_order,.-sha256_block_data_order +___ +###################################################################### +# NEON stuff +# +{{{ +my @X=map("q$_",(0..3)); +my ($T0,$T1,$T2,$T3,$T4,$T5)=("q8","q9","q10","q11","d24","d25"); +my $Xfer=$t4; +my $j=0; + +sub Dlo() { shift=~m|q([1]?[0-9])|?"d".($1*2):""; } +sub Dhi() { shift=~m|q([1]?[0-9])|?"d".($1*2+1):""; } + +sub AUTOLOAD() # thunk [simplified] x86-style perlasm +{ my $opcode = $AUTOLOAD; $opcode =~ s/.*:://; $opcode =~ s/_/\./; + my $arg = pop; + $arg = "#$arg" if ($arg*1 eq $arg); + $code .= "\t$opcode\t".join(',',@_,$arg)."\n"; +} + +sub Xupdate() +{ use integer; + my $body = shift; + my @insns = (&$body,&$body,&$body,&$body); + my ($a,$b,$c,$d,$e,$f,$g,$h); + + &vext_8 ($T0,@X[0],@X[1],4); # X[1..4] + eval(shift(@insns)); + eval(shift(@insns)); + eval(shift(@insns)); + &vext_8 ($T1,@X[2],@X[3],4); # X[9..12] + eval(shift(@insns)); + eval(shift(@insns)); + eval(shift(@insns)); + &vshr_u32 ($T2,$T0,$sigma0[0]); + eval(shift(@insns)); + eval(shift(@insns)); + &vadd_i32 (@X[0],@X[0],$T1); # X[0..3] += X[9..12] + eval(shift(@insns)); + eval(shift(@insns)); + &vshr_u32 ($T1,$T0,$sigma0[2]); + eval(shift(@insns)); + eval(shift(@insns)); + &vsli_32 ($T2,$T0,32-$sigma0[0]); + eval(shift(@insns)); + eval(shift(@insns)); + &vshr_u32 ($T3,$T0,$sigma0[1]); + eval(shift(@insns)); + eval(shift(@insns)); + &veor ($T1,$T1,$T2); + eval(shift(@insns)); + eval(shift(@insns)); + &vsli_32 ($T3,$T0,32-$sigma0[1]); + eval(shift(@insns)); + eval(shift(@insns)); + &vshr_u32 ($T4,&Dhi(@X[3]),$sigma1[0]); + eval(shift(@insns)); + eval(shift(@insns)); + &veor ($T1,$T1,$T3); # sigma0(X[1..4]) + eval(shift(@insns)); + eval(shift(@insns)); + &vsli_32 ($T4,&Dhi(@X[3]),32-$sigma1[0]); + eval(shift(@insns)); + eval(shift(@insns)); + &vshr_u32 ($T5,&Dhi(@X[3]),$sigma1[2]); + eval(shift(@insns)); + eval(shift(@insns)); + &vadd_i32 (@X[0],@X[0],$T1); # X[0..3] += sigma0(X[1..4]) + eval(shift(@insns)); + eval(shift(@insns)); + &veor ($T5,$T5,$T4); + eval(shift(@insns)); + eval(shift(@insns)); + &vshr_u32 ($T4,&Dhi(@X[3]),$sigma1[1]); + eval(shift(@insns)); + eval(shift(@insns)); + &vsli_32 ($T4,&Dhi(@X[3]),32-$sigma1[1]); + eval(shift(@insns)); + eval(shift(@insns)); + &veor ($T5,$T5,$T4); # sigma1(X[14..15]) + eval(shift(@insns)); + eval(shift(@insns)); + &vadd_i32 (&Dlo(@X[0]),&Dlo(@X[0]),$T5);# X[0..1] += sigma1(X[14..15]) + eval(shift(@insns)); + eval(shift(@insns)); + &vshr_u32 ($T4,&Dlo(@X[0]),$sigma1[0]); + eval(shift(@insns)); + eval(shift(@insns)); + &vsli_32 ($T4,&Dlo(@X[0]),32-$sigma1[0]); + eval(shift(@insns)); + eval(shift(@insns)); + &vshr_u32 ($T5,&Dlo(@X[0]),$sigma1[2]); + eval(shift(@insns)); + eval(shift(@insns)); + &veor ($T5,$T5,$T4); + eval(shift(@insns)); + eval(shift(@insns)); + &vshr_u32 ($T4,&Dlo(@X[0]),$sigma1[1]); + eval(shift(@insns)); + eval(shift(@insns)); + &vld1_32 ("{$T0}","[$Ktbl,:128]!"); + eval(shift(@insns)); + eval(shift(@insns)); + &vsli_32 ($T4,&Dlo(@X[0]),32-$sigma1[1]); + eval(shift(@insns)); + eval(shift(@insns)); + &veor ($T5,$T5,$T4); # sigma1(X[16..17]) + eval(shift(@insns)); + eval(shift(@insns)); + &vadd_i32 (&Dhi(@X[0]),&Dhi(@X[0]),$T5);# X[2..3] += sigma1(X[16..17]) + eval(shift(@insns)); + eval(shift(@insns)); + &vadd_i32 ($T0,$T0,@X[0]); + while($#insns>=2) { eval(shift(@insns)); } + &vst1_32 ("{$T0}","[$Xfer,:128]!"); + eval(shift(@insns)); + eval(shift(@insns)); + + push(@X,shift(@X)); # "rotate" X[] +} + +sub Xpreload() +{ use integer; + my $body = shift; + my @insns = (&$body,&$body,&$body,&$body); + my ($a,$b,$c,$d,$e,$f,$g,$h); + + eval(shift(@insns)); + eval(shift(@insns)); + eval(shift(@insns)); + eval(shift(@insns)); + &vld1_32 ("{$T0}","[$Ktbl,:128]!"); + eval(shift(@insns)); + eval(shift(@insns)); + eval(shift(@insns)); + eval(shift(@insns)); + &vrev32_8 (@X[0],@X[0]); + eval(shift(@insns)); + eval(shift(@insns)); + eval(shift(@insns)); + eval(shift(@insns)); + &vadd_i32 ($T0,$T0,@X[0]); + foreach (@insns) { eval; } # remaining instructions + &vst1_32 ("{$T0}","[$Xfer,:128]!"); + + push(@X,shift(@X)); # "rotate" X[] +} + +sub body_00_15 () { + ( + '($a,$b,$c,$d,$e,$f,$g,$h)=@V;'. + '&add ($h,$h,$t1)', # h+=X[i]+K[i] + '&eor ($t1,$f,$g)', + '&eor ($t0,$e,$e,"ror#".($Sigma1[1]-$Sigma1[0]))', + '&add ($a,$a,$t2)', # h+=Maj(a,b,c) from the past + '&and ($t1,$t1,$e)', + '&eor ($t2,$t0,$e,"ror#".($Sigma1[2]-$Sigma1[0]))', # Sigma1(e) + '&eor ($t0,$a,$a,"ror#".($Sigma0[1]-$Sigma0[0]))', + '&eor ($t1,$t1,$g)', # Ch(e,f,g) + '&add ($h,$h,$t2,"ror#$Sigma1[0]")', # h+=Sigma1(e) + '&eor ($t2,$a,$b)', # a^b, b^c in next round + '&eor ($t0,$t0,$a,"ror#".($Sigma0[2]-$Sigma0[0]))', # Sigma0(a) + '&add ($h,$h,$t1)', # h+=Ch(e,f,g) + '&ldr ($t1,sprintf "[sp,#%d]",4*(($j+1)&15)) if (($j&15)!=15);'. + '&ldr ($t1,"[$Ktbl]") if ($j==15);'. + '&ldr ($t1,"[sp,#64]") if ($j==31)', + '&and ($t3,$t3,$t2)', # (b^c)&=(a^b) + '&add ($d,$d,$h)', # d+=h + '&add ($h,$h,$t0,"ror#$Sigma0[0]");'. # h+=Sigma0(a) + '&eor ($t3,$t3,$b)', # Maj(a,b,c) + '$j++; unshift(@V,pop(@V)); ($t2,$t3)=($t3,$t2);' + ) +} + +$code.=<<___; +#if __ARM_MAX_ARCH__>=7 +.arch armv7-a +.fpu neon + +.global sha256_block_data_order_neon +.type sha256_block_data_order_neon,%function +.align 4 +sha256_block_data_order_neon: +.LNEON: + stmdb sp!,{r4-r12,lr} + + sub $H,sp,#16*4+16 + adrl $Ktbl,K256 + bic $H,$H,#15 @ align for 128-bit stores + mov $t2,sp + mov sp,$H @ alloca + add $len,$inp,$len,lsl#6 @ len to point at the end of inp + + vld1.8 {@X[0]},[$inp]! + vld1.8 {@X[1]},[$inp]! + vld1.8 {@X[2]},[$inp]! + vld1.8 {@X[3]},[$inp]! + vld1.32 {$T0},[$Ktbl,:128]! + vld1.32 {$T1},[$Ktbl,:128]! + vld1.32 {$T2},[$Ktbl,:128]! + vld1.32 {$T3},[$Ktbl,:128]! + vrev32.8 @X[0],@X[0] @ yes, even on + str $ctx,[sp,#64] + vrev32.8 @X[1],@X[1] @ big-endian + str $inp,[sp,#68] + mov $Xfer,sp + vrev32.8 @X[2],@X[2] + str $len,[sp,#72] + vrev32.8 @X[3],@X[3] + str $t2,[sp,#76] @ save original sp + vadd.i32 $T0,$T0,@X[0] + vadd.i32 $T1,$T1,@X[1] + vst1.32 {$T0},[$Xfer,:128]! + vadd.i32 $T2,$T2,@X[2] + vst1.32 {$T1},[$Xfer,:128]! + vadd.i32 $T3,$T3,@X[3] + vst1.32 {$T2},[$Xfer,:128]! + vst1.32 {$T3},[$Xfer,:128]! + + ldmia $ctx,{$A-$H} + sub $Xfer,$Xfer,#64 + ldr $t1,[sp,#0] + eor $t2,$t2,$t2 + eor $t3,$B,$C + b .L_00_48 + +.align 4 +.L_00_48: +___ + &Xupdate(\&body_00_15); + &Xupdate(\&body_00_15); + &Xupdate(\&body_00_15); + &Xupdate(\&body_00_15); +$code.=<<___; + teq $t1,#0 @ check for K256 terminator + ldr $t1,[sp,#0] + sub $Xfer,$Xfer,#64 + bne .L_00_48 + + ldr $inp,[sp,#68] + ldr $t0,[sp,#72] + sub $Ktbl,$Ktbl,#256 @ rewind $Ktbl + teq $inp,$t0 + it eq + subeq $inp,$inp,#64 @ avoid SEGV + vld1.8 {@X[0]},[$inp]! @ load next input block + vld1.8 {@X[1]},[$inp]! + vld1.8 {@X[2]},[$inp]! + vld1.8 {@X[3]},[$inp]! + it ne + strne $inp,[sp,#68] + mov $Xfer,sp +___ + &Xpreload(\&body_00_15); + &Xpreload(\&body_00_15); + &Xpreload(\&body_00_15); + &Xpreload(\&body_00_15); +$code.=<<___; + ldr $t0,[$t1,#0] + add $A,$A,$t2 @ h+=Maj(a,b,c) from the past + ldr $t2,[$t1,#4] + ldr $t3,[$t1,#8] + ldr $t4,[$t1,#12] + add $A,$A,$t0 @ accumulate + ldr $t0,[$t1,#16] + add $B,$B,$t2 + ldr $t2,[$t1,#20] + add $C,$C,$t3 + ldr $t3,[$t1,#24] + add $D,$D,$t4 + ldr $t4,[$t1,#28] + add $E,$E,$t0 + str $A,[$t1],#4 + add $F,$F,$t2 + str $B,[$t1],#4 + add $G,$G,$t3 + str $C,[$t1],#4 + add $H,$H,$t4 + str $D,[$t1],#4 + stmia $t1,{$E-$H} + + ittte ne + movne $Xfer,sp + ldrne $t1,[sp,#0] + eorne $t2,$t2,$t2 + ldreq sp,[sp,#76] @ restore original sp + itt ne + eorne $t3,$B,$C + bne .L_00_48 + + ldmia sp!,{r4-r12,pc} +.size sha256_block_data_order_neon,.-sha256_block_data_order_neon +#endif +___ +}}} +###################################################################### +# ARMv8 stuff +# +{{{ +my ($ABCD,$EFGH,$abcd)=map("q$_",(0..2)); +my @MSG=map("q$_",(8..11)); +my ($W0,$W1,$ABCD_SAVE,$EFGH_SAVE)=map("q$_",(12..15)); +my $Ktbl="r3"; + +$code.=<<___; +#if __ARM_MAX_ARCH__>=7 && !defined(__KERNEL__) + +# ifdef __thumb2__ +# define INST(a,b,c,d) .byte c,d|0xc,a,b +# else +# define INST(a,b,c,d) .byte a,b,c,d +# endif + +.type sha256_block_data_order_armv8,%function +.align 5 +sha256_block_data_order_armv8: +.LARMv8: + vld1.32 {$ABCD,$EFGH},[$ctx] +# ifdef __thumb2__ + adr $Ktbl,.LARMv8 + sub $Ktbl,$Ktbl,#.LARMv8-K256 +# else + adrl $Ktbl,K256 +# endif + add $len,$inp,$len,lsl#6 @ len to point at the end of inp + +.Loop_v8: + vld1.8 {@MSG[0]-@MSG[1]},[$inp]! + vld1.8 {@MSG[2]-@MSG[3]},[$inp]! + vld1.32 {$W0},[$Ktbl]! + vrev32.8 @MSG[0],@MSG[0] + vrev32.8 @MSG[1],@MSG[1] + vrev32.8 @MSG[2],@MSG[2] + vrev32.8 @MSG[3],@MSG[3] + vmov $ABCD_SAVE,$ABCD @ offload + vmov $EFGH_SAVE,$EFGH + teq $inp,$len +___ +for($i=0;$i<12;$i++) { +$code.=<<___; + vld1.32 {$W1},[$Ktbl]! + vadd.i32 $W0,$W0,@MSG[0] + sha256su0 @MSG[0],@MSG[1] + vmov $abcd,$ABCD + sha256h $ABCD,$EFGH,$W0 + sha256h2 $EFGH,$abcd,$W0 + sha256su1 @MSG[0],@MSG[2],@MSG[3] +___ + ($W0,$W1)=($W1,$W0); push(@MSG,shift(@MSG)); +} +$code.=<<___; + vld1.32 {$W1},[$Ktbl]! + vadd.i32 $W0,$W0,@MSG[0] + vmov $abcd,$ABCD + sha256h $ABCD,$EFGH,$W0 + sha256h2 $EFGH,$abcd,$W0 + + vld1.32 {$W0},[$Ktbl]! + vadd.i32 $W1,$W1,@MSG[1] + vmov $abcd,$ABCD + sha256h $ABCD,$EFGH,$W1 + sha256h2 $EFGH,$abcd,$W1 + + vld1.32 {$W1},[$Ktbl] + vadd.i32 $W0,$W0,@MSG[2] + sub $Ktbl,$Ktbl,#256-16 @ rewind + vmov $abcd,$ABCD + sha256h $ABCD,$EFGH,$W0 + sha256h2 $EFGH,$abcd,$W0 + + vadd.i32 $W1,$W1,@MSG[3] + vmov $abcd,$ABCD + sha256h $ABCD,$EFGH,$W1 + sha256h2 $EFGH,$abcd,$W1 + + vadd.i32 $ABCD,$ABCD,$ABCD_SAVE + vadd.i32 $EFGH,$EFGH,$EFGH_SAVE + it ne + bne .Loop_v8 + + vst1.32 {$ABCD,$EFGH},[$ctx] + + ret @ bx lr +.size sha256_block_data_order_armv8,.-sha256_block_data_order_armv8 +#endif +___ +}}} +$code.=<<___; +.asciz "SHA256 block transform for ARMv4/NEON/ARMv8, CRYPTOGAMS by <appro\@openssl.org>" +.align 2 +#if __ARM_MAX_ARCH__>=7 && !defined(__KERNEL__) +.comm OPENSSL_armcap_P,4,4 +#endif +___ + +open SELF,$0; +while(<SELF>) { + next if (/^#!/); + last if (!s/^#/@/ and !/^$/); + print; +} +close SELF; + +{ my %opcode = ( + "sha256h" => 0xf3000c40, "sha256h2" => 0xf3100c40, + "sha256su0" => 0xf3ba03c0, "sha256su1" => 0xf3200c40 ); + + sub unsha256 { + my ($mnemonic,$arg)=@_; + + if ($arg =~ m/q([0-9]+)(?:,\s*q([0-9]+))?,\s*q([0-9]+)/o) { + my $word = $opcode{$mnemonic}|(($1&7)<<13)|(($1&8)<<19) + |(($2&7)<<17)|(($2&8)<<4) + |(($3&7)<<1) |(($3&8)<<2); + # since ARMv7 instructions are always encoded little-endian. + # correct solution is to use .inst directive, but older + # assemblers don't implement it:-( + sprintf "INST(0x%02x,0x%02x,0x%02x,0x%02x)\t@ %s %s", + $word&0xff,($word>>8)&0xff, + ($word>>16)&0xff,($word>>24)&0xff, + $mnemonic,$arg; + } + } +} + +foreach (split($/,$code)) { + + s/\`([^\`]*)\`/eval $1/geo; + + s/\b(sha256\w+)\s+(q.*)/unsha256($1,$2)/geo; + + s/\bret\b/bx lr/go or + s/\bbx\s+lr\b/.word\t0xe12fff1e/go; # make it possible to compile with -march=armv4 + + print $_,"\n"; +} + +close STDOUT; # enforce flush |