diff options
Diffstat (limited to 'kernel/arch/arm/boot/dts/sun6i-a31.dtsi')
| -rw-r--r-- | kernel/arch/arm/boot/dts/sun6i-a31.dtsi | 222 |
1 files changed, 195 insertions, 27 deletions
diff --git a/kernel/arch/arm/boot/dts/sun6i-a31.dtsi b/kernel/arch/arm/boot/dts/sun6i-a31.dtsi index fa2f403cc..b6ad7850f 100644 --- a/kernel/arch/arm/boot/dts/sun6i-a31.dtsi +++ b/kernel/arch/arm/boot/dts/sun6i-a31.dtsi @@ -18,11 +18,6 @@ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * - * You should have received a copy of the GNU General Public - * License along with this file; if not, write to the Free - * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, - * MA 02110-1301 USA - * * Or, alternatively, * * b) Permission is hereby granted, free of charge, to any person @@ -50,6 +45,7 @@ #include "skeleton.dtsi" #include <dt-bindings/interrupt-controller/arm-gic.h> +#include <dt-bindings/thermal/thermal.h> #include <dt-bindings/pinctrl/sun4i-a10.h> @@ -65,14 +61,15 @@ #size-cells = <1>; ranges; - framebuffer@0 { - compatible = "allwinner,simple-framebuffer", "simple-framebuffer"; + simplefb_hdmi: framebuffer@0 { + compatible = "allwinner,simple-framebuffer", + "simple-framebuffer"; allwinner,pipeline = "de_be0-lcd0-hdmi"; clocks = <&pll6 0>; status = "disabled"; }; - framebuffer@1 { + simplefb_lcd: framebuffer@1 { compatible = "allwinner,simple-framebuffer", "simple-framebuffer"; allwinner,pipeline = "de_be0-lcd0"; @@ -96,10 +93,22 @@ #address-cells = <1>; #size-cells = <0>; - cpu@0 { + cpu0: cpu@0 { compatible = "arm,cortex-a7"; device_type = "cpu"; reg = <0>; + clocks = <&cpu>; + clock-latency = <244144>; /* 8 32k periods */ + operating-points = < + /* kHz uV */ + 1008000 1200000 + 864000 1200000 + 720000 1100000 + 480000 1000000 + >; + #cooling-cells = <2>; + cooling-min-level = <0>; + cooling-max-level = <3>; }; cpu@1 { @@ -121,6 +130,38 @@ }; }; + thermal-zones { + cpu_thermal { + /* milliseconds */ + polling-delay-passive = <250>; + polling-delay = <1000>; + thermal-sensors = <&rtp>; + + cooling-maps { + map0 { + trip = <&cpu_alert0>; + cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + + trips { + cpu_alert0: cpu_alert0 { + /* milliCelsius */ + temperature = <70000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu_crit: cpu_crit { + /* milliCelsius */ + temperature = <100000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + }; + }; + memory { reg = <0x40000000 0x80000000>; }; @@ -196,6 +237,14 @@ reg = <0x01c20054 0x4>; clocks = <&osc32k>, <&osc24M>, <&axi>, <&pll6 0>; clock-output-names = "ahb1"; + + /* + * Clock AHB1 from PLL6, instead of CPU/AXI which + * has rate changes due to cpufreq. Also the DMA + * controller requires AHB1 clocked from PLL6. + */ + assigned-clocks = <&ahb1>; + assigned-clock-parents = <&pll6 0>; }; ahb1_gates: clk@01c20060 { @@ -203,6 +252,20 @@ compatible = "allwinner,sun6i-a31-ahb1-gates-clk"; reg = <0x01c20060 0x8>; clocks = <&ahb1>; + clock-indices = <1>, <5>, + <6>, <8>, <9>, + <10>, <11>, <12>, + <13>, <14>, + <17>, <18>, <19>, + <20>, <21>, <22>, + <23>, <24>, <26>, + <27>, <29>, + <30>, <31>, <32>, + <36>, <37>, <40>, + <43>, <44>, <45>, + <46>, <47>, <50>, + <52>, <55>, <56>, + <57>, <58>; clock-output-names = "ahb1_mipidsi", "ahb1_ss", "ahb1_dma", "ahb1_mmc0", "ahb1_mmc1", "ahb1_mmc2", "ahb1_mmc3", "ahb1_nand1", @@ -232,6 +295,9 @@ compatible = "allwinner,sun6i-a31-apb1-gates-clk"; reg = <0x01c20068 0x4>; clocks = <&apb1>; + clock-indices = <0>, <4>, + <5>, <12>, + <13>; clock-output-names = "apb1_codec", "apb1_digital_mic", "apb1_pio", "apb1_daudio0", "apb1_daudio1"; @@ -250,10 +316,15 @@ compatible = "allwinner,sun6i-a31-apb2-gates-clk"; reg = <0x01c2006c 0x4>; clocks = <&apb2>; + clock-indices = <0>, <1>, + <2>, <3>, <16>, + <17>, <18>, <19>, + <20>, <21>; clock-output-names = "apb2_i2c0", "apb2_i2c1", - "apb2_i2c2", "apb2_i2c3", "apb2_uart0", - "apb2_uart1", "apb2_uart2", "apb2_uart3", - "apb2_uart4", "apb2_uart5"; + "apb2_i2c2", "apb2_i2c3", + "apb2_uart0", "apb2_uart1", + "apb2_uart2", "apb2_uart3", + "apb2_uart4", "apb2_uart5"; }; mmc0_clk: clk@01c20088 { @@ -296,6 +367,14 @@ "mmc3_sample"; }; + ss_clk: clk@01c2009c { + #clock-cells = <0>; + compatible = "allwinner,sun4i-a10-mod0-clk"; + reg = <0x01c2009c 0x4>; + clocks = <&osc24M>, <&pll6 0>; + clock-output-names = "ss"; + }; + spi0_clk: clk@01c200a0 { #clock-cells = <0>; compatible = "allwinner,sun4i-a10-mod0-clk"; @@ -330,20 +409,26 @@ usb_clk: clk@01c200cc { #clock-cells = <1>; - #reset-cells = <1>; + #reset-cells = <1>; compatible = "allwinner,sun6i-a31-usb-clk"; reg = <0x01c200cc 0x4>; clocks = <&osc24M>; + clock-indices = <8>, <9>, <10>, + <16>, <17>, + <18>; clock-output-names = "usb_phy0", "usb_phy1", "usb_phy2", "usb_ohci0", "usb_ohci1", "usb_ohci2"; }; /* - * The following two are dummy clocks, placeholders used in the gmac_tx - * clock. The gmac driver will choose one parent depending on the PHY - * interface mode, using clk_set_rate auto-reparenting. - * The actual TX clock rate is not controlled by the gmac_tx clock. + * The following two are dummy clocks, placeholders + * used in the gmac_tx clock. The gmac driver will + * choose one parent depending on the PHY interface + * mode, using clk_set_rate auto-reparenting. + * + * The actual TX clock rate is not controlled by the + * gmac_tx clock. */ mii_phy_tx_clk: clk@1 { #clock-cells = <0>; @@ -381,10 +466,6 @@ clocks = <&ahb1_gates 6>; resets = <&ahb1_rst 6>; #dma-cells = <1>; - - /* DMA controller requires AHB1 clocked from PLL6 */ - assigned-clocks = <&ahb1>; - assigned-clock-parents = <&pll6 0>; }; mmc0: mmc@01c0f000 { @@ -402,6 +483,8 @@ reset-names = "ahb"; interrupts = <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>; status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; }; mmc1: mmc@01c10000 { @@ -419,6 +502,8 @@ reset-names = "ahb"; interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>; status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; }; mmc2: mmc@01c11000 { @@ -436,6 +521,8 @@ reset-names = "ahb"; interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>; status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; }; mmc3: mmc@01c12000 { @@ -453,6 +540,21 @@ reset-names = "ahb"; interrupts = <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>; status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; + }; + + usb_otg: usb@01c19000 { + compatible = "allwinner,sun6i-a31-musb"; + reg = <0x01c19000 0x0400>; + clocks = <&ahb1_gates 24>; + resets = <&ahb1_rst 24>; + interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "mc"; + phys = <&usbphy 0>; + phy-names = "usb"; + extcon = <&usbphy 0>; + status = "disabled"; }; usbphy: phy@01c19400 { @@ -542,8 +644,7 @@ clocks = <&apb1_gates 5>; gpio-controller; interrupt-controller; - #interrupt-cells = <2>; - #size-cells = <0>; + #interrupt-cells = <3>; #gpio-cells = <3>; uart0_pins_a: uart0@0 { @@ -575,12 +676,39 @@ }; mmc0_pins_a: mmc0@0 { - allwinner,pins = "PF0","PF1","PF2","PF3","PF4","PF5"; + allwinner,pins = "PF0", "PF1", "PF2", + "PF3", "PF4", "PF5"; allwinner,function = "mmc0"; allwinner,drive = <SUN4I_PINCTRL_30_MA>; allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; }; + mmc1_pins_a: mmc1@0 { + allwinner,pins = "PG0", "PG1", "PG2", "PG3", + "PG4", "PG5"; + allwinner,function = "mmc1"; + allwinner,drive = <SUN4I_PINCTRL_30_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + }; + + mmc2_pins_a: mmc2@0 { + allwinner,pins = "PC6", "PC7", "PC8", "PC9", + "PC10", "PC11"; + allwinner,function = "mmc2"; + allwinner,drive = <SUN4I_PINCTRL_30_MA>; + allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; + }; + + mmc2_8bit_emmc_pins: mmc2@1 { + allwinner,pins = "PC6", "PC7", "PC8", "PC9", + "PC10", "PC11", "PC12", + "PC13", "PC14", "PC15", + "PC24"; + allwinner,function = "mmc2"; + allwinner,drive = <SUN4I_PINCTRL_30_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + }; + gmac_pins_mii_a: gmac_mii@0 { allwinner,pins = "PA0", "PA1", "PA2", "PA3", "PA8", "PA9", "PA11", @@ -658,6 +786,13 @@ reg = <0x01c20ca0 0x20>; }; + lradc: lradc@01c22800 { + compatible = "allwinner,sun4i-a10-lradc-keys"; + reg = <0x01c22800 0x100>; + interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + rtp: rtp@01c25000 { compatible = "allwinner,sun6i-a31-ts"; reg = <0x01c25000 0x100>; @@ -804,8 +939,19 @@ #size-cells = <0>; }; + crypto: crypto-engine@01c15000 { + compatible = "allwinner,sun4i-a10-crypto"; + reg = <0x01c15000 0x1000>; + interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&ahb1_gates 5>, <&ss_clk>; + clock-names = "ahb", "mod"; + resets = <&ahb1_rst 5>; + reset-names = "ahb"; + }; + timer@01c60000 { - compatible = "allwinner,sun6i-a31-hstimer", "allwinner,sun7i-a20-hstimer"; + compatible = "allwinner,sun6i-a31-hstimer", + "allwinner,sun7i-a20-hstimer"; reg = <0x01c60000 0x1000>; interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>, @@ -896,7 +1042,8 @@ ar100: ar100_clk { compatible = "allwinner,sun6i-a31-ar100-clk"; #clock-cells = <0>; - clocks = <&osc32k>, <&osc24M>, <&pll6 0>, <&pll6 0>; + clocks = <&osc32k>, <&osc24M>, <&pll6 0>, + <&pll6 0>; clock-output-names = "ar100"; }; @@ -963,7 +1110,7 @@ resets = <&apb0_rst 0>; gpio-controller; interrupt-controller; - #interrupt-cells = <2>; + #interrupt-cells = <3>; #size-cells = <0>; #gpio-cells = <3>; @@ -973,6 +1120,27 @@ allwinner,drive = <SUN4I_PINCTRL_10_MA>; allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; }; + + p2wi_pins: p2wi { + allwinner,pins = "PL0", "PL1"; + allwinner,function = "s_p2wi"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + }; + }; + + p2wi: i2c@01f03400 { + compatible = "allwinner,sun6i-a31-p2wi"; + reg = <0x01f03400 0x400>; + interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&apb0_gates 3>; + clock-frequency = <100000>; + resets = <&apb0_rst 3>; + pinctrl-names = "default"; + pinctrl-0 = <&p2wi_pins>; + status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; }; }; }; |