diff options
Diffstat (limited to 'kernel/arch/arm/boot/dts/stih416.dtsi')
| -rw-r--r-- | kernel/arch/arm/boot/dts/stih416.dtsi | 68 |
1 files changed, 66 insertions, 2 deletions
diff --git a/kernel/arch/arm/boot/dts/stih416.dtsi b/kernel/arch/arm/boot/dts/stih416.dtsi index eeb7afecb..9e3170ccd 100644 --- a/kernel/arch/arm/boot/dts/stih416.dtsi +++ b/kernel/arch/arm/boot/dts/stih416.dtsi @@ -12,7 +12,8 @@ #include <dt-bindings/phy/phy.h> #include <dt-bindings/interrupt-controller/arm-gic.h> -#include <dt-bindings/reset-controller/stih416-resets.h> +#include <dt-bindings/reset/stih416-resets.h> +#include <dt-bindings/interrupt-controller/irq-st.h> / { L2: cache-controller { compatible = "arm,pl310-cache"; @@ -23,6 +24,12 @@ cache-level = <2>; }; + arm-pmu { + compatible = "arm,cortex-a9-pmu"; + interrupt-parent = <&intc>; + interrupts = <GIC_PPI 15 IRQ_TYPE_LEVEL_HIGH>; + }; + soc { #address-cells = <1>; #size-cells = <1>; @@ -30,6 +37,12 @@ ranges; compatible = "simple-bus"; + restart { + compatible = "st,stih416-restart"; + st,syscfg = <&syscfg_sbc>; + status = "okay"; + }; + powerdown: powerdown-controller { #reset-cells = <1>; compatible = "st,stih416-powerdown"; @@ -86,6 +99,15 @@ reg = <0xfe4b5100 0x8>; }; + irq-syscfg { + compatible = "st,stih416-irq-syscfg"; + st,syscfg = <&syscfg_cpu>; + st,irq-device = <ST_IRQ_SYSCFG_PMU_0>, + <ST_IRQ_SYSCFG_PMU_1>; + st,fiq-device = <ST_IRQ_SYSCFG_DISABLED>, + <ST_IRQ_SYSCFG_DISABLED>; + }; + serial2: serial@fed32000{ compatible = "st,asc"; status = "disabled"; @@ -104,7 +126,7 @@ interrupts = <0 210 0>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_sbc_serial1>; - clocks = <&clk_sysin>; + clocks = <&clk_sysin>; }; i2c@fed40000 { @@ -445,5 +467,47 @@ <&softreset STIH416_USB3_SOFTRESET>; reset-names = "power", "softreset"; }; + + /* SAS PWM Module */ + pwm0: pwm@fed10000 { + compatible = "st,sti-pwm"; + status = "disabled"; + #pwm-cells = <2>; + reg = <0xfed10000 0x68>; + + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm0_chan0_default + &pinctrl_pwm0_chan1_default + &pinctrl_pwm0_chan2_default + &pinctrl_pwm0_chan3_default>; + + clock-names = "pwm"; + clocks = <&clk_sysin>; + st,pwm-num-chan = <4>; + }; + + /* SBC PWM Module */ + pwm1: pwm@fe510000 { + compatible = "st,sti-pwm"; + status = "disabled"; + #pwm-cells = <2>; + reg = <0xfe510000 0x68>; + + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm1_chan0_default + /* + * Shared with SBC_OBS_NOTRST. Don't + * enable unless you really know what + * you're doing. + * + * &pinctrl_pwm1_chan1_default + */ + &pinctrl_pwm1_chan2_default + &pinctrl_pwm1_chan3_default>; + + clock-names = "pwm"; + clocks = <&clk_sysin>; + st,pwm-num-chan = <3>; + }; }; }; |