diff options
Diffstat (limited to 'kernel/arch/arm/boot/dts/stih415-pinctrl.dtsi')
| -rw-r--r-- | kernel/arch/arm/boot/dts/stih415-pinctrl.dtsi | 545 |
1 files changed, 545 insertions, 0 deletions
diff --git a/kernel/arch/arm/boot/dts/stih415-pinctrl.dtsi b/kernel/arch/arm/boot/dts/stih415-pinctrl.dtsi new file mode 100644 index 000000000..3791ad95d --- /dev/null +++ b/kernel/arch/arm/boot/dts/stih415-pinctrl.dtsi @@ -0,0 +1,545 @@ +/* + * Copyright (C) 2013 STMicroelectronics (R&D) Limited. + * Author: Srinivas Kandagatla <srinivas.kandagatla@st.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * publishhed by the Free Software Foundation. + */ +#include "st-pincfg.h" +#include <dt-bindings/interrupt-controller/arm-gic.h> +/ { + + aliases { + gpio0 = &pio0; + gpio1 = &pio1; + gpio2 = &pio2; + gpio3 = &pio3; + gpio4 = &pio4; + gpio5 = &pio5; + gpio6 = &pio6; + gpio7 = &pio7; + gpio8 = &pio8; + gpio9 = &pio9; + gpio10 = &pio10; + gpio11 = &pio11; + gpio12 = &pio12; + gpio13 = &pio13; + gpio14 = &pio14; + gpio15 = &pio15; + gpio16 = &pio16; + gpio17 = &pio17; + gpio18 = &pio18; + gpio19 = &pio100; + gpio20 = &pio101; + gpio21 = &pio102; + gpio22 = &pio103; + gpio23 = &pio104; + gpio24 = &pio105; + gpio25 = &pio106; + gpio26 = &pio107; + }; + + soc { + pin-controller-sbc { + #address-cells = <1>; + #size-cells = <1>; + compatible = "st,stih415-sbc-pinctrl"; + st,syscfg = <&syscfg_sbc>; + reg = <0xfe61f080 0x4>; + reg-names = "irqmux"; + interrupts = <GIC_SPI 180 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "irqmux"; + ranges = <0 0xfe610000 0x5000>; + + pio0: gpio@fe610000 { + gpio-controller; + #gpio-cells = <1>; + interrupt-controller; + #interrupt-cells = <2>; + reg = <0 0x100>; + st,bank-name = "PIO0"; + }; + pio1: gpio@fe611000 { + gpio-controller; + #gpio-cells = <1>; + interrupt-controller; + #interrupt-cells = <2>; + reg = <0x1000 0x100>; + st,bank-name = "PIO1"; + }; + pio2: gpio@fe612000 { + gpio-controller; + #gpio-cells = <1>; + interrupt-controller; + #interrupt-cells = <2>; + reg = <0x2000 0x100>; + st,bank-name = "PIO2"; + }; + pio3: gpio@fe613000 { + gpio-controller; + #gpio-cells = <1>; + interrupt-controller; + #interrupt-cells = <2>; + reg = <0x3000 0x100>; + st,bank-name = "PIO3"; + }; + pio4: gpio@fe614000 { + gpio-controller; + #gpio-cells = <1>; + interrupt-controller; + #interrupt-cells = <2>; + reg = <0x4000 0x100>; + st,bank-name = "PIO4"; + }; + + sbc_serial1 { + pinctrl_sbc_serial1:sbc_serial1 { + st,pins { + tx = <&pio2 6 ALT3 OUT>; + rx = <&pio2 7 ALT3 IN>; + }; + }; + }; + + keyscan { + pinctrl_keyscan: keyscan { + st,pins { + keyin0 = <&pio0 2 ALT2 IN>; + keyin1 = <&pio0 3 ALT2 IN>; + keyin2 = <&pio0 4 ALT2 IN>; + keyin3 = <&pio2 6 ALT2 IN>; + + keyout0 = <&pio1 6 ALT2 OUT>; + keyout1 = <&pio1 7 ALT2 OUT>; + keyout2 = <&pio0 6 ALT2 OUT>; + keyout3 = <&pio2 7 ALT2 OUT>; + }; + }; + }; + + sbc_i2c0 { + pinctrl_sbc_i2c0_default: sbc_i2c0-default { + st,pins { + sda = <&pio4 6 ALT1 BIDIR>; + scl = <&pio4 5 ALT1 BIDIR>; + }; + }; + }; + + sbc_i2c1 { + pinctrl_sbc_i2c1_default: sbc_i2c1-default { + st,pins { + sda = <&pio3 2 ALT2 BIDIR>; + scl = <&pio3 1 ALT2 BIDIR>; + }; + }; + }; + + rc{ + pinctrl_ir: ir0 { + st,pins { + ir = <&pio4 0 ALT2 IN>; + }; + }; + }; + + gmac1 { + pinctrl_mii1: mii1 { + st,pins { + txd0 = <&pio0 0 ALT1 OUT SE_NICLK_IO 0 CLK_A>; + txd1 = <&pio0 1 ALT1 OUT SE_NICLK_IO 0 CLK_A>; + txd2 = <&pio0 2 ALT1 OUT SE_NICLK_IO 0 CLK_A>; + txd3 = <&pio0 3 ALT1 OUT SE_NICLK_IO 0 CLK_A>; + txer = <&pio0 4 ALT1 OUT SE_NICLK_IO 0 CLK_A>; + txen = <&pio0 5 ALT1 OUT SE_NICLK_IO 0 CLK_A>; + txclk = <&pio0 6 ALT1 IN NICLK 0 CLK_A>; + col = <&pio0 7 ALT1 IN BYPASS 1000>; + mdio = <&pio1 0 ALT1 OUT BYPASS 0>; + mdc = <&pio1 1 ALT1 OUT NICLK 0 CLK_A>; + crs = <&pio1 2 ALT1 IN BYPASS 1000>; + mdint = <&pio1 3 ALT1 IN BYPASS 0>; + rxd0 = <&pio1 4 ALT1 IN SE_NICLK_IO 0 CLK_A>; + rxd1 = <&pio1 5 ALT1 IN SE_NICLK_IO 0 CLK_A>; + rxd2 = <&pio1 6 ALT1 IN SE_NICLK_IO 0 CLK_A>; + rxd3 = <&pio1 7 ALT1 IN SE_NICLK_IO 0 CLK_A>; + rxdv = <&pio2 0 ALT1 IN SE_NICLK_IO 0 CLK_A>; + rx_er = <&pio2 1 ALT1 IN SE_NICLK_IO 0 CLK_A>; + rxclk = <&pio2 2 ALT1 IN NICLK 0 CLK_A>; + phyclk = <&pio2 3 ALT1 IN NICLK 1000 CLK_A>; + }; + }; + + pinctrl_rgmii1: rgmii1-0 { + st,pins { + txd0 = <&pio0 0 ALT1 OUT DE_IO 1000 CLK_A>; + txd1 = <&pio0 1 ALT1 OUT DE_IO 1000 CLK_A>; + txd2 = <&pio0 2 ALT1 OUT DE_IO 1000 CLK_A>; + txd3 = <&pio0 3 ALT1 OUT DE_IO 1000 CLK_A>; + txen = <&pio0 5 ALT1 OUT DE_IO 0 CLK_A>; + txclk = <&pio0 6 ALT1 IN NICLK 0 CLK_A>; + mdio = <&pio1 0 ALT1 OUT BYPASS 0>; + mdc = <&pio1 1 ALT1 OUT NICLK 0 CLK_A>; + rxd0 = <&pio1 4 ALT1 IN DE_IO 0 CLK_A>; + rxd1 = <&pio1 5 ALT1 IN DE_IO 0 CLK_A>; + rxd2 = <&pio1 6 ALT1 IN DE_IO 0 CLK_A>; + rxd3 = <&pio1 7 ALT1 IN DE_IO 0 CLK_A>; + + rxdv = <&pio2 0 ALT1 IN DE_IO 500 CLK_A>; + rxclk = <&pio2 2 ALT1 IN NICLK 0 CLK_A>; + phyclk = <&pio2 3 ALT4 OUT NICLK 0 CLK_B>; + + clk125= <&pio3 7 ALT4 IN NICLK 0 CLK_A>; + }; + }; + }; + }; + + pin-controller-front { + #address-cells = <1>; + #size-cells = <1>; + compatible = "st,stih415-front-pinctrl"; + st,syscfg = <&syscfg_front>; + reg = <0xfee0f080 0x4>; + reg-names = "irqmux"; + interrupts = <GIC_SPI 181 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "irqmux"; + ranges = <0 0xfee00000 0x8000>; + + pio5: gpio@fee00000 { + gpio-controller; + #gpio-cells = <1>; + interrupt-controller; + #interrupt-cells = <2>; + reg = <0 0x100>; + st,bank-name = "PIO5"; + }; + pio6: gpio@fee01000 { + gpio-controller; + #gpio-cells = <1>; + interrupt-controller; + #interrupt-cells = <2>; + reg = <0x1000 0x100>; + st,bank-name = "PIO6"; + }; + pio7: gpio@fee02000 { + gpio-controller; + #gpio-cells = <1>; + interrupt-controller; + #interrupt-cells = <2>; + reg = <0x2000 0x100>; + st,bank-name = "PIO7"; + }; + pio8: gpio@fee03000 { + gpio-controller; + #gpio-cells = <1>; + interrupt-controller; + #interrupt-cells = <2>; + reg = <0x3000 0x100>; + st,bank-name = "PIO8"; + }; + pio9: gpio@fee04000 { + gpio-controller; + #gpio-cells = <1>; + interrupt-controller; + #interrupt-cells = <2>; + reg = <0x4000 0x100>; + st,bank-name = "PIO9"; + }; + pio10: gpio@fee05000 { + gpio-controller; + #gpio-cells = <1>; + interrupt-controller; + #interrupt-cells = <2>; + reg = <0x5000 0x100>; + st,bank-name = "PIO10"; + }; + pio11: gpio@fee06000 { + gpio-controller; + #gpio-cells = <1>; + interrupt-controller; + #interrupt-cells = <2>; + reg = <0x6000 0x100>; + st,bank-name = "PIO11"; + }; + pio12: gpio@fee07000 { + gpio-controller; + #gpio-cells = <1>; + interrupt-controller; + #interrupt-cells = <2>; + reg = <0x7000 0x100>; + st,bank-name = "PIO12"; + }; + + i2c0 { + pinctrl_i2c0_default: i2c0-default { + st,pins { + sda = <&pio9 3 ALT1 BIDIR>; + scl = <&pio9 2 ALT1 BIDIR>; + }; + }; + }; + + i2c1 { + pinctrl_i2c1_default: i2c1-default { + st,pins { + sda = <&pio12 1 ALT1 BIDIR>; + scl = <&pio12 0 ALT1 BIDIR>; + }; + }; + }; + }; + + pin-controller-rear { + #address-cells = <1>; + #size-cells = <1>; + compatible = "st,stih415-rear-pinctrl"; + st,syscfg = <&syscfg_rear>; + reg = <0xfe82f080 0x4>; + reg-names = "irqmux"; + interrupts = <GIC_SPI 182 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "irqmux"; + ranges = <0 0xfe820000 0x8000>; + + pio13: gpio@fe820000 { + gpio-controller; + #gpio-cells = <1>; + interrupt-controller; + #interrupt-cells = <2>; + reg = <0 0x100>; + st,bank-name = "PIO13"; + }; + pio14: gpio@fe821000 { + gpio-controller; + #gpio-cells = <1>; + interrupt-controller; + #interrupt-cells = <2>; + reg = <0x1000 0x100>; + st,bank-name = "PIO14"; + }; + pio15: gpio@fe822000 { + gpio-controller; + #gpio-cells = <1>; + interrupt-controller; + #interrupt-cells = <2>; + reg = <0x2000 0x100>; + st,bank-name = "PIO15"; + }; + pio16: gpio@fe823000 { + gpio-controller; + #gpio-cells = <1>; + interrupt-controller; + #interrupt-cells = <2>; + reg = <0x3000 0x100>; + st,bank-name = "PIO16"; + }; + pio17: gpio@fe824000 { + gpio-controller; + #gpio-cells = <1>; + interrupt-controller; + #interrupt-cells = <2>; + reg = <0x4000 0x100>; + st,bank-name = "PIO17"; + }; + pio18: gpio@fe825000 { + gpio-controller; + #gpio-cells = <1>; + interrupt-controller; + #interrupt-cells = <2>; + reg = <0x5000 0x100>; + st,bank-name = "PIO18"; + }; + + serial2 { + pinctrl_serial2: serial2-0 { + st,pins { + tx = <&pio17 4 ALT2 OUT>; + rx = <&pio17 5 ALT2 IN>; + }; + }; + }; + + gmac0{ + pinctrl_mii0: mii0 { + st,pins { + mdint = <&pio13 6 ALT2 IN BYPASS 0>; + txen = <&pio13 7 ALT2 OUT SE_NICLK_IO 0 CLK_A>; + + txd0 = <&pio14 0 ALT2 OUT SE_NICLK_IO 0 CLK_A>; + txd1 = <&pio14 1 ALT2 OUT SE_NICLK_IO 0 CLK_A>; + txd2 = <&pio14 2 ALT2 OUT SE_NICLK_IO 0 CLK_B>; + txd3 = <&pio14 3 ALT2 OUT SE_NICLK_IO 0 CLK_B>; + + txclk = <&pio15 0 ALT2 IN NICLK 0 CLK_A>; + txer = <&pio15 1 ALT2 OUT SE_NICLK_IO 0 CLK_A>; + crs = <&pio15 2 ALT2 IN BYPASS 1000>; + col = <&pio15 3 ALT2 IN BYPASS 1000>; + mdio = <&pio15 4 ALT2 OUT BYPASS 3000>; + mdc = <&pio15 5 ALT2 OUT NICLK 0 CLK_B>; + + rxd0 = <&pio16 0 ALT2 IN SE_NICLK_IO 0 CLK_A>; + rxd1 = <&pio16 1 ALT2 IN SE_NICLK_IO 0 CLK_A>; + rxd2 = <&pio16 2 ALT2 IN SE_NICLK_IO 0 CLK_A>; + rxd3 = <&pio16 3 ALT2 IN SE_NICLK_IO 0 CLK_A>; + rxdv = <&pio15 6 ALT2 IN SE_NICLK_IO 0 CLK_A>; + rx_er = <&pio15 7 ALT2 IN SE_NICLK_IO 0 CLK_A>; + rxclk = <&pio17 0 ALT2 IN NICLK 0 CLK_A>; + phyclk = <&pio13 5 ALT2 OUT NICLK 1000 CLK_A>; + + }; + }; + + pinctrl_gmii0: gmii0 { + st,pins { + mdint = <&pio13 6 ALT2 IN BYPASS 0>; + mdio = <&pio15 4 ALT2 OUT BYPASS 3000>; + mdc = <&pio15 5 ALT2 OUT NICLK 0 CLK_B>; + txen = <&pio13 7 ALT2 OUT SE_NICLK_IO 3000 CLK_A>; + + txd0 = <&pio14 0 ALT2 OUT SE_NICLK_IO 3000 CLK_A>; + txd1 = <&pio14 1 ALT2 OUT SE_NICLK_IO 3000 CLK_A>; + txd2 = <&pio14 2 ALT2 OUT SE_NICLK_IO 3000 CLK_B>; + txd3 = <&pio14 3 ALT2 OUT SE_NICLK_IO 3000 CLK_B>; + txd4 = <&pio14 4 ALT2 OUT SE_NICLK_IO 3000 CLK_B>; + txd5 = <&pio14 5 ALT2 OUT SE_NICLK_IO 3000 CLK_B>; + txd6 = <&pio14 6 ALT2 OUT SE_NICLK_IO 3000 CLK_B>; + txd7 = <&pio14 7 ALT2 OUT SE_NICLK_IO 3000 CLK_B>; + + txclk = <&pio15 0 ALT2 IN NICLK 0 CLK_A>; + txer = <&pio15 1 ALT2 OUT SE_NICLK_IO 3000 CLK_A>; + crs = <&pio15 2 ALT2 IN BYPASS 1000>; + col = <&pio15 3 ALT2 IN BYPASS 1000>; + rxdv = <&pio15 6 ALT2 IN SE_NICLK_IO 1500 CLK_A>; + rx_er = <&pio15 7 ALT2 IN SE_NICLK_IO 1500 CLK_A>; + + rxd0 = <&pio16 0 ALT2 IN SE_NICLK_IO 1500 CLK_A>; + rxd1 = <&pio16 1 ALT2 IN SE_NICLK_IO 1500 CLK_A>; + rxd2 = <&pio16 2 ALT2 IN SE_NICLK_IO 1500 CLK_A>; + rxd3 = <&pio16 3 ALT2 IN SE_NICLK_IO 1500 CLK_A>; + rxd4 = <&pio16 4 ALT2 IN SE_NICLK_IO 1500 CLK_A>; + rxd5 = <&pio16 5 ALT2 IN SE_NICLK_IO 1500 CLK_A>; + rxd6 = <&pio16 6 ALT2 IN SE_NICLK_IO 1500 CLK_A>; + rxd7 = <&pio16 7 ALT2 IN SE_NICLK_IO 1500 CLK_A>; + + rxclk = <&pio17 0 ALT2 IN NICLK 0 CLK_A>; + clk125 = <&pio17 6 ALT1 IN NICLK 0 CLK_A>; + phyclk = <&pio13 5 ALT4 OUT NICLK 0 CLK_B>; + + + }; + }; + }; + + mmc0 { + pinctrl_mmc0: mmc0 { + st,pins { + mmcclk = <&pio13 4 ALT4 BIDIR_PU NICLK 0 CLK_B>; + data0 = <&pio14 4 ALT4 BIDIR_PU BYPASS 0>; + data1 = <&pio14 5 ALT4 BIDIR_PU BYPASS 0>; + data2 = <&pio14 6 ALT4 BIDIR_PU BYPASS 0>; + data3 = <&pio14 7 ALT4 BIDIR_PU BYPASS 0>; + cmd = <&pio15 1 ALT4 BIDIR_PU BYPASS 0>; + wp = <&pio15 3 ALT4 IN>; + data4 = <&pio16 4 ALT4 BIDIR_PU BYPASS 0>; + data5 = <&pio16 5 ALT4 BIDIR_PU BYPASS 0>; + data6 = <&pio16 6 ALT4 BIDIR_PU BYPASS 0>; + data7 = <&pio16 7 ALT4 BIDIR_PU BYPASS 0>; + pwr = <&pio17 1 ALT4 OUT>; + cd = <&pio17 2 ALT4 IN>; + led = <&pio17 3 ALT4 OUT>; + }; + }; + }; + }; + + pin-controller-left { + #address-cells = <1>; + #size-cells = <1>; + compatible = "st,stih415-left-pinctrl"; + st,syscfg = <&syscfg_left>; + reg = <0xfd6bf080 0x4>; + reg-names = "irqmux"; + interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "irqmux"; + ranges = <0 0xfd6b0000 0x3000>; + + pio100: gpio@fd6b0000 { + gpio-controller; + #gpio-cells = <1>; + interrupt-controller; + #interrupt-cells = <2>; + reg = <0 0x100>; + st,bank-name = "PIO100"; + }; + pio101: gpio@fd6b1000 { + gpio-controller; + #gpio-cells = <1>; + interrupt-controller; + #interrupt-cells = <2>; + reg = <0x1000 0x100>; + st,bank-name = "PIO101"; + }; + pio102: gpio@fd6b2000 { + gpio-controller; + #gpio-cells = <1>; + interrupt-controller; + #interrupt-cells = <2>; + reg = <0x2000 0x100>; + st,bank-name = "PIO102"; + }; + }; + + pin-controller-right { + #address-cells = <1>; + #size-cells = <1>; + compatible = "st,stih415-right-pinctrl"; + st,syscfg = <&syscfg_right>; + reg = <0xfd33f080 0x4>; + reg-names = "irqmux"; + interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "irqmux"; + ranges = <0 0xfd330000 0x5000>; + + pio103: gpio@fd330000 { + gpio-controller; + #gpio-cells = <1>; + interrupt-controller; + #interrupt-cells = <2>; + reg = <0 0x100>; + st,bank-name = "PIO103"; + }; + pio104: gpio@fd331000 { + gpio-controller; + #gpio-cells = <1>; + interrupt-controller; + #interrupt-cells = <2>; + reg = <0x1000 0x100>; + st,bank-name = "PIO104"; + }; + pio105: gpio@fd332000 { + gpio-controller; + #gpio-cells = <1>; + interrupt-controller; + #interrupt-cells = <2>; + reg = <0x2000 0x100>; + st,bank-name = "PIO105"; + }; + pio106: gpio@fd333000 { + gpio-controller; + #gpio-cells = <1>; + interrupt-controller; + #interrupt-cells = <2>; + reg = <0x3000 0x100>; + st,bank-name = "PIO106"; + }; + pio107: gpio@fd334000 { + gpio-controller; + #gpio-cells = <1>; + interrupt-controller; + #interrupt-cells = <2>; + reg = <0x4000 0x100>; + st,bank-name = "PIO107"; + }; + }; + }; +}; |