diff options
Diffstat (limited to 'kernel/arch/arm/boot/dts/ste-nomadik-stn8815.dtsi')
| -rw-r--r-- | kernel/arch/arm/boot/dts/ste-nomadik-stn8815.dtsi | 67 |
1 files changed, 35 insertions, 32 deletions
diff --git a/kernel/arch/arm/boot/dts/ste-nomadik-stn8815.dtsi b/kernel/arch/arm/boot/dts/ste-nomadik-stn8815.dtsi index f182f6538..27a333eb8 100644 --- a/kernel/arch/arm/boot/dts/ste-nomadik-stn8815.dtsi +++ b/kernel/arch/arm/boot/dts/ste-nomadik-stn8815.dtsi @@ -21,6 +21,13 @@ interrupts = <30>; cache-unified; cache-level = <2>; + cache-size = <131072>; + cache-sets = <512>; + cache-line-size = <32>; + /* At full speed latency must be >=2 */ + arm,tag-latency = <8>; + arm,data-latency = <8 8>; + arm,dirty-latency = <8>; }; mtu0: mtu@101e2000 { @@ -52,6 +59,7 @@ gpio-controller; #gpio-cells = <2>; gpio-bank = <0>; + gpio-ranges = <&pinctrl 0 0 32>; clocks = <&pclk>; }; @@ -65,6 +73,7 @@ gpio-controller; #gpio-cells = <2>; gpio-bank = <1>; + gpio-ranges = <&pinctrl 0 32 32>; clocks = <&pclk>; }; @@ -78,12 +87,14 @@ gpio-controller; #gpio-cells = <2>; gpio-bank = <2>; + gpio-ranges = <&pinctrl 0 64 32>; clocks = <&pclk>; }; gpio3: gpio@101e7000 { compatible = "st,nomadik-gpio"; reg = <0x101e7000 0x80>; + ngpio = <28>; interrupt-parent = <&vica>; interrupts = <9>; interrupt-controller; @@ -91,20 +102,14 @@ gpio-controller; #gpio-cells = <2>; gpio-bank = <3>; + gpio-ranges = <&pinctrl 0 96 28>; clocks = <&pclk>; }; - pinctrl { + pinctrl: pinctrl { compatible = "stericsson,stn8815-pinctrl"; + nomadik-gpio-chips = <&gpio0>, <&gpio1>, <&gpio2>, <&gpio3>; /* Pin configurations */ - uart0 { - uart0_default_mux: uart0_mux { - u0_default_mux { - function = "u0"; - groups = "u0_a_1"; - }; - }; - }; uart1 { uart1_default_mux: uart1_mux { u1_default_mux { @@ -122,22 +127,14 @@ }; mmcsd_default_mode: mmcsd_default { mmcsd_default_cfg1 { - /* MCCLK */ - pins = "GPIO8_B10"; - ste,output = <0>; - }; - mmcsd_default_cfg2 { - /* MCCMDDIR, MCDAT0DIR, MCDAT31DIR, MCDATDIR2 */ - pins = "GPIO10_C11", "GPIO15_A12", - "GPIO16_C13", "GPIO23_D15"; - ste,output = <1>; - }; - mmcsd_default_cfg3 { - /* MCCMD, MCDAT3-0, MCMSFBCLK */ - pins = "GPIO9_A10", "GPIO11_B11", - "GPIO12_A11", "GPIO13_C12", - "GPIO14_B12", "GPIO24_C15"; - ste,input = <1>; + /* + * MCCLK, MCCMDDIR, MCDAT0DIR, MCDAT31DIR, MCDATDIR2 + * MCCMD, MCDAT3-0, MCMSFBCLK + */ + pins = "GPIO8_B10", "GPIO9_A10", "GPIO10_C11", "GPIO11_B11", + "GPIO12_A11", "GPIO13_C12", "GPIO14_B12", "GPIO15_A12", + "GPIO16_C13", "GPIO23_D15", "GPIO24_C15"; + ste,output = <2>; }; }; }; @@ -721,10 +718,6 @@ compatible = "st,stw5095"; reg = <0x1a>; }; - lis3lv02dl@1d { - compatible = "st,lis3lv02dl"; - reg = <0x1d>; - }; }; amba { @@ -754,8 +747,7 @@ interrupts = <12>; clocks = <&uart0clk>, <&pclkuart0>; clock-names = "uartclk", "apb_pclk"; - pinctrl-names = "default"; - pinctrl-0 = <&uart0_default_mux>; + status = "disabled"; }; uart1: uart@101fb000 { @@ -802,10 +794,21 @@ clock-names = "mclk", "apb_pclk"; interrupt-parent = <&vica>; interrupts = <22>; - max-frequency = <48000000>; + max-frequency = <400000>; bus-width = <4>; cap-mmc-highspeed; cap-sd-highspeed; + full-pwr-cycle; + /* + * The STw4811 circuit used with the Nomadik strictly + * requires that all of these signal direction pins be + * routed and used for its 4-bit levelshifter. + */ + st,sig-dir-dat0; + st,sig-dir-dat2; + st,sig-dir-dat31; + st,sig-dir-cmd; + st,sig-pin-fbclk; pinctrl-names = "default"; pinctrl-0 = <&mmcsd_default_mux>, <&mmcsd_default_mode>; vmmc-supply = <&vmmc_regulator>; |