diff options
Diffstat (limited to 'kernel/arch/arm/boot/dts/qcom-apq8064-ifc6410.dts')
| -rw-r--r-- | kernel/arch/arm/boot/dts/qcom-apq8064-ifc6410.dts | 232 |
1 files changed, 222 insertions, 10 deletions
diff --git a/kernel/arch/arm/boot/dts/qcom-apq8064-ifc6410.dts b/kernel/arch/arm/boot/dts/qcom-apq8064-ifc6410.dts index e641001ca..11ac608b6 100644 --- a/kernel/arch/arm/boot/dts/qcom-apq8064-ifc6410.dts +++ b/kernel/arch/arm/boot/dts/qcom-apq8064-ifc6410.dts @@ -1,19 +1,45 @@ #include "qcom-apq8064-v2.0.dtsi" #include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/pinctrl/qcom,pmic-gpio.h> / { model = "Qualcomm APQ8064/IFC6410"; compatible = "qcom,apq8064-ifc6410", "qcom,apq8064"; + aliases { + serial0 = &gsbi7_serial; + serial1 = &gsbi6_serial; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + pwrseq { + compatible = "simple-bus"; + + sdcc4_pwrseq: sdcc4_pwrseq { + pinctrl-names = "default"; + pinctrl-0 = <&wlan_default_gpios>; + compatible = "mmc-pwrseq-simple"; + reset-gpios = <&pm8921_gpio 43 GPIO_ACTIVE_LOW>; + }; + }; + + leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <¬ify_led>; + + led@1 { + label = "apq8064:green:user1"; + gpios = <&pm8921_gpio 18 GPIO_ACTIVE_HIGH>; + default-state = "on"; + }; + }; + soc { pinctrl@800000 { - i2c1_pins: i2c1 { - mux { - pins = "gpio20", "gpio21"; - function = "gsbi1"; - }; - }; - card_detect: card_detect { mux { pins = "gpio26"; @@ -23,6 +49,103 @@ }; }; + rpm@108000 { + regulators { + vin_lvs1_3_6-supply = <&pm8921_s4>; + vin_lvs2-supply = <&pm8921_s1>; + vin_lvs4_5_7-supply = <&pm8921_s4>; + + vdd_l1_l2_l12_l18-supply = <&pm8921_s4>; + vdd_l24-supply = <&pm8921_s1>; + vdd_l25-supply = <&pm8921_s1>; + vdd_l26-supply = <&pm8921_s7>; + vdd_l27-supply = <&pm8921_s7>; + vdd_l28-supply = <&pm8921_s7>; + + + /* Buck SMPS */ + pm8921_s1: s1 { + regulator-always-on; + regulator-min-microvolt = <1225000>; + regulator-max-microvolt = <1225000>; + qcom,switch-mode-frequency = <3200000>; + bias-pull-down; + }; + + pm8921_s3: s3 { + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1400000>; + qcom,switch-mode-frequency = <4800000>; + }; + + pm8921_s4: s4 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + qcom,switch-mode-frequency = <3200000>; + }; + + pm8921_s7: s7 { + regulator-min-microvolt = <1300000>; + regulator-max-microvolt = <1300000>; + qcom,switch-mode-frequency = <3200000>; + }; + + pm8921_l3: l3 { + regulator-min-microvolt = <3050000>; + regulator-max-microvolt = <3300000>; + bias-pull-down; + }; + + pm8921_l4: l4 { + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1800000>; + bias-pull-down; + }; + + pm8921_l5: l5 { + regulator-min-microvolt = <2750000>; + regulator-max-microvolt = <3000000>; + bias-pull-down; + }; + + pm8921_l6: l6 { + regulator-min-microvolt = <2950000>; + regulator-max-microvolt = <2950000>; + bias-pull-down; + }; + + pm8921_l23: l23 { + regulator-min-microvolt = <1700000>; + regulator-max-microvolt = <1900000>; + bias-pull-down; + }; + + pm8921_lvs1: lvs1 { + bias-pull-down; + }; + }; + }; + + ext_3p3v: regulator-fixed@1 { + compatible = "regulator-fixed"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "ext_3p3v"; + regulator-type = "voltage"; + startup-delay-us = <0>; + gpio = <&tlmm_pinmux 77 GPIO_ACTIVE_HIGH>; + enable-active-high; + regulator-boot-on; + }; + + gsbi3: gsbi@16200000 { + status = "okay"; + qcom,mode = <GSBI_PROT_I2C>; + i2c3: i2c@16280000 { + status = "okay"; + }; + }; + gsbi@12440000 { status = "okay"; qcom,mode = <GSBI_PROT_I2C>; @@ -30,10 +153,8 @@ i2c@12460000 { status = "okay"; clock-frequency = <200000>; - pinctrl-0 = <&i2c1_pins>; - pinctrl-names = "default"; - eeprom: eeprom@52 { + eeprom@52 { compatible = "atmel,24c128"; reg = <0x52>; pagesize = <32>; @@ -41,11 +162,96 @@ }; }; + gsbi@16500000 { + status = "ok"; + qcom,mode = <GSBI_PROT_I2C_UART>; + + serial@16540000 { + status = "ok"; + pinctrl-names = "default"; + pinctrl-0 = <&gsbi6_uart_4pins>; + }; + }; + gsbi@16600000 { status = "ok"; qcom,mode = <GSBI_PROT_I2C_UART>; serial@16640000 { status = "ok"; + pinctrl-names = "default"; + pinctrl-0 = <&gsbi7_uart_2pins>; + }; + }; + + sata_phy0: phy@1b400000 { + status = "okay"; + }; + + sata0: sata@29000000 { + status = "okay"; + target-supply = <&pm8921_s4>; + }; + + /* OTG */ + usb1_phy: phy@12500000 { + status = "okay"; + vddcx-supply = <&pm8921_s3>; + v3p3-supply = <&pm8921_l3>; + v1p8-supply = <&pm8921_l4>; + }; + + usb3_phy: phy@12520000 { + status = "okay"; + vddcx-supply = <&pm8921_s3>; + v3p3-supply = <&pm8921_l3>; + v1p8-supply = <&pm8921_l23>; + }; + + usb4_phy: phy@12530000 { + status = "okay"; + vddcx-supply = <&pm8921_s3>; + v3p3-supply = <&pm8921_l3>; + v1p8-supply = <&pm8921_l23>; + }; + + gadget1: gadget@12500000 { + status = "okay"; + }; + + /* OTG */ + usb1: usb@12500000 { + status = "okay"; + }; + + usb3: usb@12520000 { + status = "okay"; + }; + + usb4: usb@12530000 { + status = "okay"; + }; + + qcom,ssbi@500000 { + pmic@0 { + gpio@150 { + wlan_default_gpios: wlan-gpios { + pios { + pins = "gpio43"; + function = "normal"; + bias-disable; + power-source = <PM8921_GPIO_S4>; + }; + }; + + notify_led: nled { + pios { + pins = "gpio18"; + function = "normal"; + bias-disable; + power-source = <PM8921_GPIO_S4>; + }; + }; + }; }; }; @@ -53,11 +259,14 @@ /* eMMC */ sdcc1: sdcc@12400000 { status = "okay"; + vmmc-supply = <&pm8921_l5>; + vqmmc-supply = <&pm8921_s4>; }; /* External micro SD card */ sdcc3: sdcc@12180000 { status = "okay"; + vmmc-supply = <&pm8921_l6>; pinctrl-names = "default"; pinctrl-0 = <&card_detect>; cd-gpios = <&tlmm_pinmux 26 GPIO_ACTIVE_LOW>; @@ -65,6 +274,9 @@ /* WLAN */ sdcc4: sdcc@121c0000 { status = "okay"; + vmmc-supply = <&ext_3p3v>; + vqmmc-supply = <&pm8921_lvs1>; + mmc-pwrseq = <&sdcc4_pwrseq>; }; }; }; |