diff options
Diffstat (limited to 'kernel/arch/arm/boot/dts/imx6sl-warp.dts')
| -rw-r--r-- | kernel/arch/arm/boot/dts/imx6sl-warp.dts | 71 |
1 files changed, 21 insertions, 50 deletions
diff --git a/kernel/arch/arm/boot/dts/imx6sl-warp.dts b/kernel/arch/arm/boot/dts/imx6sl-warp.dts index 64f7decf1..10c699631 100644 --- a/kernel/arch/arm/boot/dts/imx6sl-warp.dts +++ b/kernel/arch/arm/boot/dts/imx6sl-warp.dts @@ -58,44 +58,12 @@ reg = <0x80000000 0x20000000>; }; - regulators { - compatible = "simple-bus"; - #address-cells = <1>; - #size-cells = <0>; - - reg_usb_otg1_vbus: regulator@0 { - compatible = "regulator-fixed"; - reg = <0>; - regulator-name = "usb_otg1_vbus"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - gpio = <&gpio4 0 0>; - enable-active-high; - }; - - reg_usb_otg2_vbus: regulator@1 { - compatible = "regulator-fixed"; - reg = <1>; - regulator-name = "usb_otg2_vbus"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - gpio = <&gpio4 2 0>; - enable-active-high; - }; - - reg_1p8v: regulator@2 { - compatible = "regulator-fixed"; - reg = <2>; - regulator-name = "1P8V"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - }; - usdhc3_pwrseq: usdhc3_pwrseq { compatible = "mmc-pwrseq-simple"; reset-gpios = <&gpio4 5 GPIO_ACTIVE_LOW>, /* WL_REG_ON */ + <&gpio4 7 GPIO_ACTIVE_LOW>, /* WL_HOSTWAKE */ <&gpio3 25 GPIO_ACTIVE_LOW>, /* BT_REG_ON */ + <&gpio3 27 GPIO_ACTIVE_LOW>, /* BT_HOSTWAKE */ <&gpio4 4 GPIO_ACTIVE_LOW>, /* BT_WAKE */ <&gpio4 6 GPIO_ACTIVE_LOW>; /* BT_RST_N */ }; @@ -107,28 +75,27 @@ status = "okay"; }; -&uart2 { +&uart3 { pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_uart2>; - fsl,uart-has-rtscts; + pinctrl-0 = <&pinctrl_uart3>; status = "okay"; }; -&uart3 { +&uart5 { pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_uart3>; + pinctrl-0 = <&pinctrl_uart5>; + fsl,uart-has-rtscts; status = "okay"; }; &usbotg1 { - vbus-supply = <®_usb_otg1_vbus>; - dr_mode = "host"; + dr_mode = "peripheral"; disable-over-current; status = "okay"; }; &usbotg2 { - vbus-supply = <®_usb_otg2_vbus>; + dr_mode = "host"; disable-over-current; status = "okay"; }; @@ -165,14 +132,6 @@ >; }; - pinctrl_uart2: uart2grp { - fsl,pins = < - MX6SL_PAD_EPDC_D12__UART2_RX_DATA 0x41b0b1 - MX6SL_PAD_EPDC_D13__UART2_TX_DATA 0x41b0b1 - MX6SL_PAD_EPDC_D14__UART2_RTS_B 0x4130B1 - MX6SL_PAD_EPDC_D15__UART2_CTS_B 0x4130B1 - >; - }; pinctrl_uart3: uart3grp { fsl,pins = < @@ -181,6 +140,15 @@ >; }; + pinctrl_uart5: uart5grp { + fsl,pins = < + MX6SL_PAD_ECSPI1_SCLK__UART5_RX_DATA 0x41b0b1 + MX6SL_PAD_ECSPI1_MOSI__UART5_TX_DATA 0x41b0b1 + MX6SL_PAD_ECSPI1_MISO__UART5_RTS_B 0x4130b1 + MX6SL_PAD_ECSPI1_SS0__UART5_CTS_B 0x4130b1 + >; + }; + pinctrl_usdhc2: usdhc2grp { fsl,pins = < MX6SL_PAD_SD2_CMD__SD2_CMD 0x417059 @@ -193,6 +161,7 @@ MX6SL_PAD_SD2_DAT5__SD2_DATA5 0x417059 MX6SL_PAD_SD2_DAT6__SD2_DATA6 0x417059 MX6SL_PAD_SD2_DAT7__SD2_DATA7 0x417059 + MX6SL_PAD_SD2_RST__SD2_RESET 0x417059 >; }; @@ -208,6 +177,7 @@ MX6SL_PAD_SD2_DAT5__SD2_DATA5 0x4170b9 MX6SL_PAD_SD2_DAT6__SD2_DATA6 0x4170b9 MX6SL_PAD_SD2_DAT7__SD2_DATA7 0x4170b9 + MX6SL_PAD_SD2_RST__SD2_RESET 0x4170b9 >; }; @@ -223,6 +193,7 @@ MX6SL_PAD_SD2_DAT5__SD2_DATA5 0x4170f9 MX6SL_PAD_SD2_DAT6__SD2_DATA6 0x4170f9 MX6SL_PAD_SD2_DAT7__SD2_DATA7 0x4170f9 + MX6SL_PAD_SD2_RST__SD2_RESET 0x4170f9 >; }; |