diff options
Diffstat (limited to 'kernel/arch/arm/boot/dts/exynos3250-rinato.dts')
| -rw-r--r-- | kernel/arch/arm/boot/dts/exynos3250-rinato.dts | 37 |
1 files changed, 31 insertions, 6 deletions
diff --git a/kernel/arch/arm/boot/dts/exynos3250-rinato.dts b/kernel/arch/arm/boot/dts/exynos3250-rinato.dts index 75aba40c6..3e64d5dcd 100644 --- a/kernel/arch/arm/boot/dts/exynos3250-rinato.dts +++ b/kernel/arch/arm/boot/dts/exynos3250-rinato.dts @@ -16,6 +16,7 @@ #include "exynos3250.dtsi" #include <dt-bindings/input/input.h> #include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/clock/samsung,s2mps11.h> / { model = "Samsung Rinato board"; @@ -48,7 +49,7 @@ i2c_max77836: i2c-gpio-0 { compatible = "i2c-gpio"; - gpios = <&gpd0 2 0>, <&gpd0 3 0>; + gpios = <&gpd0 2 GPIO_ACTIVE_HIGH>, <&gpd0 3 GPIO_ACTIVE_HIGH>; #address-cells = <1>; #size-cells = <0>; @@ -106,6 +107,21 @@ min-microvolt = <1100000>; max-microvolt = <2700000>; }; + + thermal-zones { + cpu_thermal: cpu-thermal { + cooling-maps { + map0 { + /* Corresponds to 500MHz */ + cooling-device = <&cpu0 5 5>; + }; + map1 { + /* Corresponds to 200MHz */ + cooling-device = <&cpu0 8 8>; + }; + }; + }; + }; }; &adc { @@ -131,8 +147,13 @@ }; }; +&cpu0 { + cpu0-supply = <&buck2_reg>; +}; + &exynos_usbphy { status = "okay"; + vbus-supply = <&safeout_reg>; }; &hsotg { @@ -168,8 +189,8 @@ reg = <0>; vdd3-supply = <&ldo16_reg>; vci-supply = <&ldo20_reg>; - reset-gpios = <&gpe0 1 0>; - te-gpios = <&gpx0 6 0>; + reset-gpios = <&gpe0 1 GPIO_ACTIVE_HIGH>; + te-gpios = <&gpx0 6 GPIO_ACTIVE_HIGH>; power-on-delay= <30>; power-off-delay= <120>; reset-delay = <5>; @@ -348,14 +369,14 @@ regulator-name = "V_EMMC_1.8V"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; - samsung,ext-control-gpios = <&gpk0 2 0>; + samsung,ext-control-gpios = <&gpk0 2 GPIO_ACTIVE_HIGH>; }; ldo12_reg: LDO12 { regulator-name = "V_EMMC_2.8V"; regulator-min-microvolt = <2800000>; regulator-max-microvolt = <2800000>; - samsung,ext-control-gpios = <&gpk0 2 0>; + samsung,ext-control-gpios = <&gpk0 2 GPIO_ACTIVE_HIGH>; }; ldo13_reg: LDO13 { @@ -567,6 +588,10 @@ status = "okay"; }; +&jpeg { + status = "okay"; +}; + &mshc_0 { #address-cells = <1>; #size-cells = <0>; @@ -605,7 +630,7 @@ }; &rtc { - clocks = <&cmu CLK_RTC>, <&s2mps14_osc 0>; + clocks = <&cmu CLK_RTC>, <&s2mps14_osc S2MPS11_CLK_AP>; clock-names = "rtc", "rtc_src"; status = "okay"; }; |