summaryrefslogtreecommitdiffstats
path: root/kernel/arch/arm/Kconfig
diff options
context:
space:
mode:
Diffstat (limited to 'kernel/arch/arm/Kconfig')
-rw-r--r--kernel/arch/arm/Kconfig2122
1 files changed, 2122 insertions, 0 deletions
diff --git a/kernel/arch/arm/Kconfig b/kernel/arch/arm/Kconfig
new file mode 100644
index 000000000..bfaeed7a4
--- /dev/null
+++ b/kernel/arch/arm/Kconfig
@@ -0,0 +1,2122 @@
+config ARM
+ bool
+ default y
+ select ARCH_HAS_ATOMIC64_DEC_IF_POSITIVE
+ select ARCH_HAS_ELF_RANDOMIZE
+ select ARCH_HAS_TICK_BROADCAST if GENERIC_CLOCKEVENTS_BROADCAST
+ select ARCH_HAVE_CUSTOM_GPIO_H
+ select ARCH_HAS_GCOV_PROFILE_ALL
+ select ARCH_MIGHT_HAVE_PC_PARPORT
+ select ARCH_SUPPORTS_ATOMIC_RMW
+ select ARCH_USE_BUILTIN_BSWAP
+ select ARCH_USE_CMPXCHG_LOCKREF
+ select ARCH_WANT_IPC_PARSE_VERSION
+ select BUILDTIME_EXTABLE_SORT if MMU
+ select CLONE_BACKWARDS
+ select CPU_PM if (SUSPEND || CPU_IDLE)
+ select DCACHE_WORD_ACCESS if HAVE_EFFICIENT_UNALIGNED_ACCESS
+ select GENERIC_ALLOCATOR
+ select GENERIC_ATOMIC64 if (CPU_V7M || CPU_V6 || !CPU_32v6K || !AEABI)
+ select GENERIC_CLOCKEVENTS_BROADCAST if SMP
+ select GENERIC_IDLE_POLL_SETUP
+ select GENERIC_IRQ_PROBE
+ select GENERIC_IRQ_SHOW
+ select GENERIC_IRQ_SHOW_LEVEL
+ select GENERIC_PCI_IOMAP
+ select GENERIC_SCHED_CLOCK
+ select GENERIC_SMP_IDLE_THREAD
+ select GENERIC_STRNCPY_FROM_USER
+ select GENERIC_STRNLEN_USER
+ select HANDLE_DOMAIN_IRQ
+ select HARDIRQS_SW_RESEND
+ select HAVE_ARCH_AUDITSYSCALL if (AEABI && !OABI_COMPAT)
+ select HAVE_ARCH_BITREVERSE if (CPU_32v7M || CPU_32v7) && !CPU_32v6
+ select HAVE_ARCH_JUMP_LABEL if (!XIP_KERNEL && !PREEMPT_RT_BASE)
+ select HAVE_ARCH_KGDB
+ select HAVE_ARCH_SECCOMP_FILTER if (AEABI && !OABI_COMPAT)
+ select HAVE_ARCH_TRACEHOOK
+ select HAVE_BPF_JIT
+ select HAVE_CC_STACKPROTECTOR
+ select HAVE_CONTEXT_TRACKING
+ select HAVE_C_RECORDMCOUNT
+ select HAVE_DEBUG_KMEMLEAK
+ select HAVE_DMA_API_DEBUG
+ select HAVE_DMA_ATTRS
+ select HAVE_DMA_CONTIGUOUS if MMU
+ select HAVE_DYNAMIC_FTRACE if (!XIP_KERNEL)
+ select HAVE_EFFICIENT_UNALIGNED_ACCESS if (CPU_V6 || CPU_V6K || CPU_V7) && MMU
+ select HAVE_FTRACE_MCOUNT_RECORD if (!XIP_KERNEL)
+ select HAVE_FUNCTION_GRAPH_TRACER if (!THUMB2_KERNEL)
+ select HAVE_FUNCTION_TRACER if (!XIP_KERNEL)
+ select HAVE_GENERIC_DMA_COHERENT
+ select HAVE_HW_BREAKPOINT if (PERF_EVENTS && (CPU_V6 || CPU_V6K || CPU_V7))
+ select HAVE_IDE if PCI || ISA || PCMCIA
+ select HAVE_IRQ_TIME_ACCOUNTING
+ select HAVE_KERNEL_GZIP
+ select HAVE_KERNEL_LZ4
+ select HAVE_KERNEL_LZMA
+ select HAVE_KERNEL_LZO
+ select HAVE_KERNEL_XZ
+ select HAVE_KPROBES if !XIP_KERNEL
+ select HAVE_KRETPROBES if (HAVE_KPROBES)
+ select HAVE_MEMBLOCK
+ select HAVE_MOD_ARCH_SPECIFIC if ARM_UNWIND
+ select HAVE_OPROFILE if (HAVE_PERF_EVENTS)
+ select HAVE_OPTPROBES if !THUMB2_KERNEL
+ select HAVE_PERF_EVENTS
+ select HAVE_PERF_REGS
+ select HAVE_PERF_USER_STACK_DUMP
+ select HAVE_PREEMPT_LAZY
+ select HAVE_RCU_TABLE_FREE if (SMP && ARM_LPAE)
+ select HAVE_REGS_AND_STACK_ACCESS_API
+ select HAVE_SYSCALL_TRACEPOINTS
+ select HAVE_UID16
+ select HAVE_VIRT_CPU_ACCOUNTING_GEN
+ select IRQ_FORCED_THREADING
+ select MODULES_USE_ELF_REL
+ select NO_BOOTMEM
+ select OLD_SIGACTION
+ select OLD_SIGSUSPEND3
+ select PERF_USE_VMALLOC
+ select RTC_LIB
+ select SYS_SUPPORTS_APM_EMULATION
+ # Above selects are sorted alphabetically; please add new ones
+ # according to that. Thanks.
+ help
+ The ARM series is a line of low-power-consumption RISC chip designs
+ licensed by ARM Ltd and targeted at embedded applications and
+ handhelds such as the Compaq IPAQ. ARM-based PCs are no longer
+ manufactured, but legacy ARM-based PC hardware remains popular in
+ Europe. There is an ARM Linux project with a web page at
+ <http://www.arm.linux.org.uk/>.
+
+config ARM_HAS_SG_CHAIN
+ select ARCH_HAS_SG_CHAIN
+ bool
+
+config NEED_SG_DMA_LENGTH
+ bool
+
+config ARM_DMA_USE_IOMMU
+ bool
+ select ARM_HAS_SG_CHAIN
+ select NEED_SG_DMA_LENGTH
+
+if ARM_DMA_USE_IOMMU
+
+config ARM_DMA_IOMMU_ALIGNMENT
+ int "Maximum PAGE_SIZE order of alignment for DMA IOMMU buffers"
+ range 4 9
+ default 8
+ help
+ DMA mapping framework by default aligns all buffers to the smallest
+ PAGE_SIZE order which is greater than or equal to the requested buffer
+ size. This works well for buffers up to a few hundreds kilobytes, but
+ for larger buffers it just a waste of address space. Drivers which has
+ relatively small addressing window (like 64Mib) might run out of
+ virtual space with just a few allocations.
+
+ With this parameter you can specify the maximum PAGE_SIZE order for
+ DMA IOMMU buffers. Larger buffers will be aligned only to this
+ specified order. The order is expressed as a power of two multiplied
+ by the PAGE_SIZE.
+
+endif
+
+config MIGHT_HAVE_PCI
+ bool
+
+config SYS_SUPPORTS_APM_EMULATION
+ bool
+
+config HAVE_TCM
+ bool
+ select GENERIC_ALLOCATOR
+
+config HAVE_PROC_CPU
+ bool
+
+config NO_IOPORT_MAP
+ bool
+
+config EISA
+ bool
+ ---help---
+ The Extended Industry Standard Architecture (EISA) bus was
+ developed as an open alternative to the IBM MicroChannel bus.
+
+ The EISA bus provided some of the features of the IBM MicroChannel
+ bus while maintaining backward compatibility with cards made for
+ the older ISA bus. The EISA bus saw limited use between 1988 and
+ 1995 when it was made obsolete by the PCI bus.
+
+ Say Y here if you are building a kernel for an EISA-based machine.
+
+ Otherwise, say N.
+
+config SBUS
+ bool
+
+config STACKTRACE_SUPPORT
+ bool
+ default y
+
+config HAVE_LATENCYTOP_SUPPORT
+ bool
+ depends on !SMP
+ default y
+
+config LOCKDEP_SUPPORT
+ bool
+ default y
+
+config TRACE_IRQFLAGS_SUPPORT
+ bool
+ default y
+
+config RWSEM_XCHGADD_ALGORITHM
+ bool
+ default y
+
+config ARCH_HAS_ILOG2_U32
+ bool
+
+config ARCH_HAS_ILOG2_U64
+ bool
+
+config ARCH_HAS_BANDGAP
+ bool
+
+config GENERIC_HWEIGHT
+ bool
+ default y
+
+config GENERIC_CALIBRATE_DELAY
+ bool
+ default y
+
+config ARCH_MAY_HAVE_PC_FDC
+ bool
+
+config ZONE_DMA
+ bool
+
+config NEED_DMA_MAP_STATE
+ def_bool y
+
+config ARCH_SUPPORTS_UPROBES
+ def_bool y
+
+config ARCH_HAS_DMA_SET_COHERENT_MASK
+ bool
+
+config GENERIC_ISA_DMA
+ bool
+
+config FIQ
+ bool
+
+config NEED_RET_TO_USER
+ bool
+
+config ARCH_MTD_XIP
+ bool
+
+config VECTORS_BASE
+ hex
+ default 0xffff0000 if MMU || CPU_HIGH_VECTOR
+ default DRAM_BASE if REMAP_VECTORS_TO_RAM
+ default 0x00000000
+ help
+ The base address of exception vectors. This must be two pages
+ in size.
+
+config ARM_PATCH_PHYS_VIRT
+ bool "Patch physical to virtual translations at runtime" if EMBEDDED
+ default y
+ depends on !XIP_KERNEL && MMU
+ depends on !ARCH_REALVIEW || !SPARSEMEM
+ help
+ Patch phys-to-virt and virt-to-phys translation functions at
+ boot and module load time according to the position of the
+ kernel in system memory.
+
+ This can only be used with non-XIP MMU kernels where the base
+ of physical memory is at a 16MB boundary.
+
+ Only disable this option if you know that you do not require
+ this feature (eg, building a kernel for a single machine) and
+ you need to shrink the kernel to the minimal size.
+
+config NEED_MACH_IO_H
+ bool
+ help
+ Select this when mach/io.h is required to provide special
+ definitions for this platform. The need for mach/io.h should
+ be avoided when possible.
+
+config NEED_MACH_MEMORY_H
+ bool
+ help
+ Select this when mach/memory.h is required to provide special
+ definitions for this platform. The need for mach/memory.h should
+ be avoided when possible.
+
+config PHYS_OFFSET
+ hex "Physical address of main memory" if MMU
+ depends on !ARM_PATCH_PHYS_VIRT
+ default DRAM_BASE if !MMU
+ default 0x00000000 if ARCH_EBSA110 || \
+ EP93XX_SDCE3_SYNC_PHYS_OFFSET || \
+ ARCH_FOOTBRIDGE || \
+ ARCH_INTEGRATOR || \
+ ARCH_IOP13XX || \
+ ARCH_KS8695 || \
+ (ARCH_REALVIEW && !REALVIEW_HIGH_PHYS_OFFSET)
+ default 0x10000000 if ARCH_OMAP1 || ARCH_RPC
+ default 0x20000000 if ARCH_S5PV210
+ default 0x70000000 if REALVIEW_HIGH_PHYS_OFFSET
+ default 0xc0000000 if EP93XX_SDCE0_PHYS_OFFSET || ARCH_SA1100
+ default 0xd0000000 if EP93XX_SDCE1_PHYS_OFFSET
+ default 0xe0000000 if EP93XX_SDCE2_PHYS_OFFSET
+ default 0xf0000000 if EP93XX_SDCE3_ASYNC_PHYS_OFFSET
+ help
+ Please provide the physical address corresponding to the
+ location of main memory in your system.
+
+config GENERIC_BUG
+ def_bool y
+ depends on BUG
+
+config PGTABLE_LEVELS
+ int
+ default 3 if ARM_LPAE
+ default 2
+
+source "init/Kconfig"
+
+source "kernel/Kconfig.freezer"
+
+menu "System Type"
+
+config MMU
+ bool "MMU-based Paged Memory Management Support"
+ default y
+ help
+ Select if you want MMU-based virtualised addressing space
+ support by paged memory management. If unsure, say 'Y'.
+
+#
+# The "ARM system type" choice list is ordered alphabetically by option
+# text. Please add new entries in the option alphabetic order.
+#
+choice
+ prompt "ARM system type"
+ default ARCH_VERSATILE if !MMU
+ default ARCH_MULTIPLATFORM if MMU
+
+config ARCH_MULTIPLATFORM
+ bool "Allow multiple platforms to be selected"
+ depends on MMU
+ select ARCH_WANT_OPTIONAL_GPIOLIB
+ select ARM_HAS_SG_CHAIN
+ select ARM_PATCH_PHYS_VIRT
+ select AUTO_ZRELADDR
+ select CLKSRC_OF
+ select COMMON_CLK
+ select GENERIC_CLOCKEVENTS
+ select MIGHT_HAVE_PCI
+ select MULTI_IRQ_HANDLER
+ select SPARSE_IRQ
+ select USE_OF
+
+config ARCH_REALVIEW
+ bool "ARM Ltd. RealView family"
+ select ARCH_WANT_OPTIONAL_GPIOLIB
+ select ARM_AMBA
+ select ARM_TIMER_SP804
+ select COMMON_CLK
+ select COMMON_CLK_VERSATILE
+ select GENERIC_CLOCKEVENTS
+ select GPIO_PL061 if GPIOLIB
+ select ICST
+ select NEED_MACH_MEMORY_H
+ select PLAT_VERSATILE
+ select PLAT_VERSATILE_SCHED_CLOCK
+ help
+ This enables support for ARM Ltd RealView boards.
+
+config ARCH_VERSATILE
+ bool "ARM Ltd. Versatile family"
+ select ARCH_WANT_OPTIONAL_GPIOLIB
+ select ARM_AMBA
+ select ARM_TIMER_SP804
+ select ARM_VIC
+ select CLKDEV_LOOKUP
+ select GENERIC_CLOCKEVENTS
+ select HAVE_MACH_CLKDEV
+ select ICST
+ select PLAT_VERSATILE
+ select PLAT_VERSATILE_CLOCK
+ select PLAT_VERSATILE_SCHED_CLOCK
+ select VERSATILE_FPGA_IRQ
+ help
+ This enables support for ARM Ltd Versatile board.
+
+config ARCH_CLPS711X
+ bool "Cirrus Logic CLPS711x/EP721x/EP731x-based"
+ select ARCH_REQUIRE_GPIOLIB
+ select AUTO_ZRELADDR
+ select CLKSRC_MMIO
+ select COMMON_CLK
+ select CPU_ARM720T
+ select GENERIC_CLOCKEVENTS
+ select MFD_SYSCON
+ select SOC_BUS
+ help
+ Support for Cirrus Logic 711x/721x/731x based boards.
+
+config ARCH_GEMINI
+ bool "Cortina Systems Gemini"
+ select ARCH_REQUIRE_GPIOLIB
+ select CLKSRC_MMIO
+ select CPU_FA526
+ select GENERIC_CLOCKEVENTS
+ help
+ Support for the Cortina Systems Gemini family SoCs
+
+config ARCH_EBSA110
+ bool "EBSA-110"
+ select ARCH_USES_GETTIMEOFFSET
+ select CPU_SA110
+ select ISA
+ select NEED_MACH_IO_H
+ select NEED_MACH_MEMORY_H
+ select NO_IOPORT_MAP
+ help
+ This is an evaluation board for the StrongARM processor available
+ from Digital. It has limited hardware on-board, including an
+ Ethernet interface, two PCMCIA sockets, two serial ports and a
+ parallel port.
+
+config ARCH_EFM32
+ bool "Energy Micro efm32"
+ depends on !MMU
+ select ARCH_REQUIRE_GPIOLIB
+ select ARM_NVIC
+ select AUTO_ZRELADDR
+ select CLKSRC_OF
+ select COMMON_CLK
+ select CPU_V7M
+ select GENERIC_CLOCKEVENTS
+ select NO_DMA
+ select NO_IOPORT_MAP
+ select SPARSE_IRQ
+ select USE_OF
+ help
+ Support for Energy Micro's (now Silicon Labs) efm32 Giant Gecko
+ processors.
+
+config ARCH_EP93XX
+ bool "EP93xx-based"
+ select ARCH_HAS_HOLES_MEMORYMODEL
+ select ARCH_REQUIRE_GPIOLIB
+ select ARCH_USES_GETTIMEOFFSET
+ select ARM_AMBA
+ select ARM_VIC
+ select CLKDEV_LOOKUP
+ select CPU_ARM920T
+ help
+ This enables support for the Cirrus EP93xx series of CPUs.
+
+config ARCH_FOOTBRIDGE
+ bool "FootBridge"
+ select CPU_SA110
+ select FOOTBRIDGE
+ select GENERIC_CLOCKEVENTS
+ select HAVE_IDE
+ select NEED_MACH_IO_H if !MMU
+ select NEED_MACH_MEMORY_H
+ help
+ Support for systems based on the DC21285 companion chip
+ ("FootBridge"), such as the Simtec CATS and the Rebel NetWinder.
+
+config ARCH_NETX
+ bool "Hilscher NetX based"
+ select ARM_VIC
+ select CLKSRC_MMIO
+ select CPU_ARM926T
+ select GENERIC_CLOCKEVENTS
+ help
+ This enables support for systems based on the Hilscher NetX Soc
+
+config ARCH_IOP13XX
+ bool "IOP13xx-based"
+ depends on MMU
+ select CPU_XSC3
+ select NEED_MACH_MEMORY_H
+ select NEED_RET_TO_USER
+ select PCI
+ select PLAT_IOP
+ select VMSPLIT_1G
+ select SPARSE_IRQ
+ help
+ Support for Intel's IOP13XX (XScale) family of processors.
+
+config ARCH_IOP32X
+ bool "IOP32x-based"
+ depends on MMU
+ select ARCH_REQUIRE_GPIOLIB
+ select CPU_XSCALE
+ select GPIO_IOP
+ select NEED_RET_TO_USER
+ select PCI
+ select PLAT_IOP
+ help
+ Support for Intel's 80219 and IOP32X (XScale) family of
+ processors.
+
+config ARCH_IOP33X
+ bool "IOP33x-based"
+ depends on MMU
+ select ARCH_REQUIRE_GPIOLIB
+ select CPU_XSCALE
+ select GPIO_IOP
+ select NEED_RET_TO_USER
+ select PCI
+ select PLAT_IOP
+ help
+ Support for Intel's IOP33X (XScale) family of processors.
+
+config ARCH_IXP4XX
+ bool "IXP4xx-based"
+ depends on MMU
+ select ARCH_HAS_DMA_SET_COHERENT_MASK
+ select ARCH_REQUIRE_GPIOLIB
+ select ARCH_SUPPORTS_BIG_ENDIAN
+ select CLKSRC_MMIO
+ select CPU_XSCALE
+ select DMABOUNCE if PCI
+ select GENERIC_CLOCKEVENTS
+ select MIGHT_HAVE_PCI
+ select NEED_MACH_IO_H
+ select USB_EHCI_BIG_ENDIAN_DESC
+ select USB_EHCI_BIG_ENDIAN_MMIO
+ help
+ Support for Intel's IXP4XX (XScale) family of processors.
+
+config ARCH_DOVE
+ bool "Marvell Dove"
+ select ARCH_REQUIRE_GPIOLIB
+ select CPU_PJ4
+ select GENERIC_CLOCKEVENTS
+ select MIGHT_HAVE_PCI
+ select MVEBU_MBUS
+ select PINCTRL
+ select PINCTRL_DOVE
+ select PLAT_ORION_LEGACY
+ help
+ Support for the Marvell Dove SoC 88AP510
+
+config ARCH_MV78XX0
+ bool "Marvell MV78xx0"
+ select ARCH_REQUIRE_GPIOLIB
+ select CPU_FEROCEON
+ select GENERIC_CLOCKEVENTS
+ select MVEBU_MBUS
+ select PCI
+ select PLAT_ORION_LEGACY
+ help
+ Support for the following Marvell MV78xx0 series SoCs:
+ MV781x0, MV782x0.
+
+config ARCH_ORION5X
+ bool "Marvell Orion"
+ depends on MMU
+ select ARCH_REQUIRE_GPIOLIB
+ select CPU_FEROCEON
+ select GENERIC_CLOCKEVENTS
+ select MVEBU_MBUS
+ select PCI
+ select PLAT_ORION_LEGACY
+ help
+ Support for the following Marvell Orion 5x series SoCs:
+ Orion-1 (5181), Orion-VoIP (5181L), Orion-NAS (5182),
+ Orion-2 (5281), Orion-1-90 (6183).
+
+config ARCH_MMP
+ bool "Marvell PXA168/910/MMP2"
+ depends on MMU
+ select ARCH_REQUIRE_GPIOLIB
+ select CLKDEV_LOOKUP
+ select GENERIC_ALLOCATOR
+ select GENERIC_CLOCKEVENTS
+ select GPIO_PXA
+ select IRQ_DOMAIN
+ select MULTI_IRQ_HANDLER
+ select PINCTRL
+ select PLAT_PXA
+ select SPARSE_IRQ
+ help
+ Support for Marvell's PXA168/PXA910(MMP) and MMP2 processor line.
+
+config ARCH_KS8695
+ bool "Micrel/Kendin KS8695"
+ select ARCH_REQUIRE_GPIOLIB
+ select CLKSRC_MMIO
+ select CPU_ARM922T
+ select GENERIC_CLOCKEVENTS
+ select NEED_MACH_MEMORY_H
+ help
+ Support for Micrel/Kendin KS8695 "Centaur" (ARM922T) based
+ System-on-Chip devices.
+
+config ARCH_W90X900
+ bool "Nuvoton W90X900 CPU"
+ select ARCH_REQUIRE_GPIOLIB
+ select CLKDEV_LOOKUP
+ select CLKSRC_MMIO
+ select CPU_ARM926T
+ select GENERIC_CLOCKEVENTS
+ help
+ Support for Nuvoton (Winbond logic dept.) ARM9 processor,
+ At present, the w90x900 has been renamed nuc900, regarding
+ the ARM series product line, you can login the following
+ link address to know more.
+
+ <http://www.nuvoton.com/hq/enu/ProductAndSales/ProductLines/
+ ConsumerElectronicsIC/ARMMicrocontroller/ARMMicrocontroller>
+
+config ARCH_LPC32XX
+ bool "NXP LPC32XX"
+ select ARCH_REQUIRE_GPIOLIB
+ select ARM_AMBA
+ select CLKDEV_LOOKUP
+ select CLKSRC_MMIO
+ select CPU_ARM926T
+ select GENERIC_CLOCKEVENTS
+ select HAVE_IDE
+ select USE_OF
+ help
+ Support for the NXP LPC32XX family of processors
+
+config ARCH_PXA
+ bool "PXA2xx/PXA3xx-based"
+ depends on MMU
+ select ARCH_MTD_XIP
+ select ARCH_REQUIRE_GPIOLIB
+ select ARM_CPU_SUSPEND if PM
+ select AUTO_ZRELADDR
+ select CLKDEV_LOOKUP
+ select CLKSRC_MMIO
+ select CLKSRC_OF
+ select GENERIC_CLOCKEVENTS
+ select GPIO_PXA
+ select HAVE_IDE
+ select IRQ_DOMAIN
+ select MULTI_IRQ_HANDLER
+ select PLAT_PXA
+ select SPARSE_IRQ
+ help
+ Support for Intel/Marvell's PXA2xx/PXA3xx processor line.
+
+config ARCH_SHMOBILE_LEGACY
+ bool "Renesas ARM SoCs (non-multiplatform)"
+ select ARCH_SHMOBILE
+ select ARM_PATCH_PHYS_VIRT if MMU
+ select CLKDEV_LOOKUP
+ select CPU_V7
+ select GENERIC_CLOCKEVENTS
+ select HAVE_ARM_SCU if SMP
+ select HAVE_ARM_TWD if SMP
+ select HAVE_SMP
+ select MIGHT_HAVE_CACHE_L2X0
+ select MULTI_IRQ_HANDLER
+ select NO_IOPORT_MAP
+ select PINCTRL
+ select PM_GENERIC_DOMAINS if PM
+ select SH_CLK_CPG
+ select SPARSE_IRQ
+ help
+ Support for Renesas ARM SoC platforms using a non-multiplatform
+ kernel. This includes the SH-Mobile, R-Mobile, EMMA-Mobile, R-Car
+ and RZ families.
+
+config ARCH_RPC
+ bool "RiscPC"
+ select ARCH_ACORN
+ select ARCH_MAY_HAVE_PC_FDC
+ select ARCH_SPARSEMEM_ENABLE
+ select ARCH_USES_GETTIMEOFFSET
+ select CPU_SA110
+ select FIQ
+ select HAVE_IDE
+ select HAVE_PATA_PLATFORM
+ select ISA_DMA_API
+ select NEED_MACH_IO_H
+ select NEED_MACH_MEMORY_H
+ select NO_IOPORT_MAP
+ select VIRT_TO_BUS
+ help
+ On the Acorn Risc-PC, Linux can support the internal IDE disk and
+ CD-ROM interface, serial and parallel port, and the floppy drive.
+
+config ARCH_SA1100
+ bool "SA1100-based"
+ select ARCH_MTD_XIP
+ select ARCH_REQUIRE_GPIOLIB
+ select ARCH_SPARSEMEM_ENABLE
+ select CLKDEV_LOOKUP
+ select CLKSRC_MMIO
+ select CPU_FREQ
+ select CPU_SA1100
+ select GENERIC_CLOCKEVENTS
+ select HAVE_IDE
+ select IRQ_DOMAIN
+ select ISA
+ select MULTI_IRQ_HANDLER
+ select NEED_MACH_MEMORY_H
+ select SPARSE_IRQ
+ help
+ Support for StrongARM 11x0 based boards.
+
+config ARCH_S3C24XX
+ bool "Samsung S3C24XX SoCs"
+ select ARCH_REQUIRE_GPIOLIB
+ select ATAGS
+ select CLKDEV_LOOKUP
+ select CLKSRC_SAMSUNG_PWM
+ select GENERIC_CLOCKEVENTS
+ select GPIO_SAMSUNG
+ select HAVE_S3C2410_I2C if I2C
+ select HAVE_S3C2410_WATCHDOG if WATCHDOG
+ select HAVE_S3C_RTC if RTC_CLASS
+ select MULTI_IRQ_HANDLER
+ select NEED_MACH_IO_H
+ select SAMSUNG_ATAGS
+ help
+ Samsung S3C2410, S3C2412, S3C2413, S3C2416, S3C2440, S3C2442, S3C2443
+ and S3C2450 SoCs based systems, such as the Simtec Electronics BAST
+ (<http://www.simtec.co.uk/products/EB110ITX/>), the IPAQ 1940 or the
+ Samsung SMDK2410 development board (and derivatives).
+
+config ARCH_S3C64XX
+ bool "Samsung S3C64XX"
+ select ARCH_REQUIRE_GPIOLIB
+ select ARM_AMBA
+ select ARM_VIC
+ select ATAGS
+ select CLKDEV_LOOKUP
+ select CLKSRC_SAMSUNG_PWM
+ select COMMON_CLK_SAMSUNG
+ select CPU_V6K
+ select GENERIC_CLOCKEVENTS
+ select GPIO_SAMSUNG
+ select HAVE_S3C2410_I2C if I2C
+ select HAVE_S3C2410_WATCHDOG if WATCHDOG
+ select HAVE_TCM
+ select NO_IOPORT_MAP
+ select PLAT_SAMSUNG
+ select PM_GENERIC_DOMAINS if PM
+ select S3C_DEV_NAND
+ select S3C_GPIO_TRACK
+ select SAMSUNG_ATAGS
+ select SAMSUNG_WAKEMASK
+ select SAMSUNG_WDT_RESET
+ help
+ Samsung S3C64XX series based systems
+
+config ARCH_DAVINCI
+ bool "TI DaVinci"
+ select ARCH_HAS_HOLES_MEMORYMODEL
+ select ARCH_REQUIRE_GPIOLIB
+ select CLKDEV_LOOKUP
+ select GENERIC_ALLOCATOR
+ select GENERIC_CLOCKEVENTS
+ select GENERIC_IRQ_CHIP
+ select HAVE_IDE
+ select TI_PRIV_EDMA
+ select USE_OF
+ select ZONE_DMA
+ help
+ Support for TI's DaVinci platform.
+
+config ARCH_OMAP1
+ bool "TI OMAP1"
+ depends on MMU
+ select ARCH_HAS_HOLES_MEMORYMODEL
+ select ARCH_OMAP
+ select ARCH_REQUIRE_GPIOLIB
+ select CLKDEV_LOOKUP
+ select CLKSRC_MMIO
+ select GENERIC_CLOCKEVENTS
+ select GENERIC_IRQ_CHIP
+ select HAVE_IDE
+ select IRQ_DOMAIN
+ select NEED_MACH_IO_H if PCCARD
+ select NEED_MACH_MEMORY_H
+ help
+ Support for older TI OMAP1 (omap7xx, omap15xx or omap16xx)
+
+endchoice
+
+menu "Multiple platform selection"
+ depends on ARCH_MULTIPLATFORM
+
+comment "CPU Core family selection"
+
+config ARCH_MULTI_V4
+ bool "ARMv4 based platforms (FA526)"
+ depends on !ARCH_MULTI_V6_V7
+ select ARCH_MULTI_V4_V5
+ select CPU_FA526
+
+config ARCH_MULTI_V4T
+ bool "ARMv4T based platforms (ARM720T, ARM920T, ...)"
+ depends on !ARCH_MULTI_V6_V7
+ select ARCH_MULTI_V4_V5
+ select CPU_ARM920T if !(CPU_ARM7TDMI || CPU_ARM720T || \
+ CPU_ARM740T || CPU_ARM9TDMI || CPU_ARM922T || \
+ CPU_ARM925T || CPU_ARM940T)
+
+config ARCH_MULTI_V5
+ bool "ARMv5 based platforms (ARM926T, XSCALE, PJ1, ...)"
+ depends on !ARCH_MULTI_V6_V7
+ select ARCH_MULTI_V4_V5
+ select CPU_ARM926T if !(CPU_ARM946E || CPU_ARM1020 || \
+ CPU_ARM1020E || CPU_ARM1022 || CPU_ARM1026 || \
+ CPU_XSCALE || CPU_XSC3 || CPU_MOHAWK || CPU_FEROCEON)
+
+config ARCH_MULTI_V4_V5
+ bool
+
+config ARCH_MULTI_V6
+ bool "ARMv6 based platforms (ARM11)"
+ select ARCH_MULTI_V6_V7
+ select CPU_V6K
+
+config ARCH_MULTI_V7
+ bool "ARMv7 based platforms (Cortex-A, PJ4, Scorpion, Krait)"
+ default y
+ select ARCH_MULTI_V6_V7
+ select CPU_V7
+ select HAVE_SMP
+
+config ARCH_MULTI_V6_V7
+ bool
+ select MIGHT_HAVE_CACHE_L2X0
+
+config ARCH_MULTI_CPU_AUTO
+ def_bool !(ARCH_MULTI_V4 || ARCH_MULTI_V4T || ARCH_MULTI_V6_V7)
+ select ARCH_MULTI_V5
+
+endmenu
+
+config ARCH_VIRT
+ bool "Dummy Virtual Machine" if ARCH_MULTI_V7
+ select ARM_AMBA
+ select ARM_GIC
+ select ARM_PSCI
+ select HAVE_ARM_ARCH_TIMER
+
+#
+# This is sorted alphabetically by mach-* pathname. However, plat-*
+# Kconfigs may be included either alphabetically (according to the
+# plat- suffix) or along side the corresponding mach-* source.
+#
+source "arch/arm/mach-mvebu/Kconfig"
+
+source "arch/arm/mach-alpine/Kconfig"
+
+source "arch/arm/mach-asm9260/Kconfig"
+
+source "arch/arm/mach-at91/Kconfig"
+
+source "arch/arm/mach-axxia/Kconfig"
+
+source "arch/arm/mach-bcm/Kconfig"
+
+source "arch/arm/mach-berlin/Kconfig"
+
+source "arch/arm/mach-clps711x/Kconfig"
+
+source "arch/arm/mach-cns3xxx/Kconfig"
+
+source "arch/arm/mach-davinci/Kconfig"
+
+source "arch/arm/mach-digicolor/Kconfig"
+
+source "arch/arm/mach-dove/Kconfig"
+
+source "arch/arm/mach-ep93xx/Kconfig"
+
+source "arch/arm/mach-footbridge/Kconfig"
+
+source "arch/arm/mach-gemini/Kconfig"
+
+source "arch/arm/mach-highbank/Kconfig"
+
+source "arch/arm/mach-hisi/Kconfig"
+
+source "arch/arm/mach-integrator/Kconfig"
+
+source "arch/arm/mach-iop32x/Kconfig"
+
+source "arch/arm/mach-iop33x/Kconfig"
+
+source "arch/arm/mach-iop13xx/Kconfig"
+
+source "arch/arm/mach-ixp4xx/Kconfig"
+
+source "arch/arm/mach-keystone/Kconfig"
+
+source "arch/arm/mach-ks8695/Kconfig"
+
+source "arch/arm/mach-meson/Kconfig"
+
+source "arch/arm/mach-moxart/Kconfig"
+
+source "arch/arm/mach-mv78xx0/Kconfig"
+
+source "arch/arm/mach-imx/Kconfig"
+
+source "arch/arm/mach-mediatek/Kconfig"
+
+source "arch/arm/mach-mxs/Kconfig"
+
+source "arch/arm/mach-netx/Kconfig"
+
+source "arch/arm/mach-nomadik/Kconfig"
+
+source "arch/arm/mach-nspire/Kconfig"
+
+source "arch/arm/plat-omap/Kconfig"
+
+source "arch/arm/mach-omap1/Kconfig"
+
+source "arch/arm/mach-omap2/Kconfig"
+
+source "arch/arm/mach-orion5x/Kconfig"
+
+source "arch/arm/mach-picoxcell/Kconfig"
+
+source "arch/arm/mach-pxa/Kconfig"
+source "arch/arm/plat-pxa/Kconfig"
+
+source "arch/arm/mach-mmp/Kconfig"
+
+source "arch/arm/mach-qcom/Kconfig"
+
+source "arch/arm/mach-realview/Kconfig"
+
+source "arch/arm/mach-rockchip/Kconfig"
+
+source "arch/arm/mach-sa1100/Kconfig"
+
+source "arch/arm/mach-socfpga/Kconfig"
+
+source "arch/arm/mach-spear/Kconfig"
+
+source "arch/arm/mach-sti/Kconfig"
+
+source "arch/arm/mach-s3c24xx/Kconfig"
+
+source "arch/arm/mach-s3c64xx/Kconfig"
+
+source "arch/arm/mach-s5pv210/Kconfig"
+
+source "arch/arm/mach-exynos/Kconfig"
+source "arch/arm/plat-samsung/Kconfig"
+
+source "arch/arm/mach-shmobile/Kconfig"
+
+source "arch/arm/mach-sunxi/Kconfig"
+
+source "arch/arm/mach-prima2/Kconfig"
+
+source "arch/arm/mach-tegra/Kconfig"
+
+source "arch/arm/mach-u300/Kconfig"
+
+source "arch/arm/mach-ux500/Kconfig"
+
+source "arch/arm/mach-versatile/Kconfig"
+
+source "arch/arm/mach-vexpress/Kconfig"
+source "arch/arm/plat-versatile/Kconfig"
+
+source "arch/arm/mach-vt8500/Kconfig"
+
+source "arch/arm/mach-w90x900/Kconfig"
+
+source "arch/arm/mach-zynq/Kconfig"
+
+# Definitions to make life easier
+config ARCH_ACORN
+ bool
+
+config PLAT_IOP
+ bool
+ select GENERIC_CLOCKEVENTS
+
+config PLAT_ORION
+ bool
+ select CLKSRC_MMIO
+ select COMMON_CLK
+ select GENERIC_IRQ_CHIP
+ select IRQ_DOMAIN
+
+config PLAT_ORION_LEGACY
+ bool
+ select PLAT_ORION
+
+config PLAT_PXA
+ bool
+
+config PLAT_VERSATILE
+ bool
+
+config ARM_TIMER_SP804
+ bool
+ select CLKSRC_MMIO
+ select CLKSRC_OF if OF
+
+source "arch/arm/firmware/Kconfig"
+
+source arch/arm/mm/Kconfig
+
+config IWMMXT
+ bool "Enable iWMMXt support"
+ depends on CPU_XSCALE || CPU_XSC3 || CPU_MOHAWK || CPU_PJ4 || CPU_PJ4B
+ default y if PXA27x || PXA3xx || ARCH_MMP || CPU_PJ4 || CPU_PJ4B
+ help
+ Enable support for iWMMXt context switching at run time if
+ running on a CPU that supports it.
+
+config MULTI_IRQ_HANDLER
+ bool
+ help
+ Allow each machine to specify it's own IRQ handler at run time.
+
+if !MMU
+source "arch/arm/Kconfig-nommu"
+endif
+
+config PJ4B_ERRATA_4742
+ bool "PJ4B Errata 4742: IDLE Wake Up Commands can Cause the CPU Core to Cease Operation"
+ depends on CPU_PJ4B && MACH_ARMADA_370
+ default y
+ help
+ When coming out of either a Wait for Interrupt (WFI) or a Wait for
+ Event (WFE) IDLE states, a specific timing sensitivity exists between
+ the retiring WFI/WFE instructions and the newly issued subsequent
+ instructions. This sensitivity can result in a CPU hang scenario.
+ Workaround:
+ The software must insert either a Data Synchronization Barrier (DSB)
+ or Data Memory Barrier (DMB) command immediately after the WFI/WFE
+ instruction
+
+config ARM_ERRATA_326103
+ bool "ARM errata: FSR write bit incorrect on a SWP to read-only memory"
+ depends on CPU_V6
+ help
+ Executing a SWP instruction to read-only memory does not set bit 11
+ of the FSR on the ARM 1136 prior to r1p0. This causes the kernel to
+ treat the access as a read, preventing a COW from occurring and
+ causing the faulting task to livelock.
+
+config ARM_ERRATA_411920
+ bool "ARM errata: Invalidation of the Instruction Cache operation can fail"
+ depends on CPU_V6 || CPU_V6K
+ help
+ Invalidation of the Instruction Cache operation can
+ fail. This erratum is present in 1136 (before r1p4), 1156 and 1176.
+ It does not affect the MPCore. This option enables the ARM Ltd.
+ recommended workaround.
+
+config ARM_ERRATA_430973
+ bool "ARM errata: Stale prediction on replaced interworking branch"
+ depends on CPU_V7
+ help
+ This option enables the workaround for the 430973 Cortex-A8
+ r1p* erratum. If a code sequence containing an ARM/Thumb
+ interworking branch is replaced with another code sequence at the
+ same virtual address, whether due to self-modifying code or virtual
+ to physical address re-mapping, Cortex-A8 does not recover from the
+ stale interworking branch prediction. This results in Cortex-A8
+ executing the new code sequence in the incorrect ARM or Thumb state.
+ The workaround enables the BTB/BTAC operations by setting ACTLR.IBE
+ and also flushes the branch target cache at every context switch.
+ Note that setting specific bits in the ACTLR register may not be
+ available in non-secure mode.
+
+config ARM_ERRATA_458693
+ bool "ARM errata: Processor deadlock when a false hazard is created"
+ depends on CPU_V7
+ depends on !ARCH_MULTIPLATFORM
+ help
+ This option enables the workaround for the 458693 Cortex-A8 (r2p0)
+ erratum. For very specific sequences of memory operations, it is
+ possible for a hazard condition intended for a cache line to instead
+ be incorrectly associated with a different cache line. This false
+ hazard might then cause a processor deadlock. The workaround enables
+ the L1 caching of the NEON accesses and disables the PLD instruction
+ in the ACTLR register. Note that setting specific bits in the ACTLR
+ register may not be available in non-secure mode.
+
+config ARM_ERRATA_460075
+ bool "ARM errata: Data written to the L2 cache can be overwritten with stale data"
+ depends on CPU_V7
+ depends on !ARCH_MULTIPLATFORM
+ help
+ This option enables the workaround for the 460075 Cortex-A8 (r2p0)
+ erratum. Any asynchronous access to the L2 cache may encounter a
+ situation in which recent store transactions to the L2 cache are lost
+ and overwritten with stale memory contents from external memory. The
+ workaround disables the write-allocate mode for the L2 cache via the
+ ACTLR register. Note that setting specific bits in the ACTLR register
+ may not be available in non-secure mode.
+
+config ARM_ERRATA_742230
+ bool "ARM errata: DMB operation may be faulty"
+ depends on CPU_V7 && SMP
+ depends on !ARCH_MULTIPLATFORM
+ help
+ This option enables the workaround for the 742230 Cortex-A9
+ (r1p0..r2p2) erratum. Under rare circumstances, a DMB instruction
+ between two write operations may not ensure the correct visibility
+ ordering of the two writes. This workaround sets a specific bit in
+ the diagnostic register of the Cortex-A9 which causes the DMB
+ instruction to behave as a DSB, ensuring the correct behaviour of
+ the two writes.
+
+config ARM_ERRATA_742231
+ bool "ARM errata: Incorrect hazard handling in the SCU may lead to data corruption"
+ depends on CPU_V7 && SMP
+ depends on !ARCH_MULTIPLATFORM
+ help
+ This option enables the workaround for the 742231 Cortex-A9
+ (r2p0..r2p2) erratum. Under certain conditions, specific to the
+ Cortex-A9 MPCore micro-architecture, two CPUs working in SMP mode,
+ accessing some data located in the same cache line, may get corrupted
+ data due to bad handling of the address hazard when the line gets
+ replaced from one of the CPUs at the same time as another CPU is
+ accessing it. This workaround sets specific bits in the diagnostic
+ register of the Cortex-A9 which reduces the linefill issuing
+ capabilities of the processor.
+
+config ARM_ERRATA_643719
+ bool "ARM errata: LoUIS bit field in CLIDR register is incorrect"
+ depends on CPU_V7 && SMP
+ default y
+ help
+ This option enables the workaround for the 643719 Cortex-A9 (prior to
+ r1p0) erratum. On affected cores the LoUIS bit field of the CLIDR
+ register returns zero when it should return one. The workaround
+ corrects this value, ensuring cache maintenance operations which use
+ it behave as intended and avoiding data corruption.
+
+config ARM_ERRATA_720789
+ bool "ARM errata: TLBIASIDIS and TLBIMVAIS operations can broadcast a faulty ASID"
+ depends on CPU_V7
+ help
+ This option enables the workaround for the 720789 Cortex-A9 (prior to
+ r2p0) erratum. A faulty ASID can be sent to the other CPUs for the
+ broadcasted CP15 TLB maintenance operations TLBIASIDIS and TLBIMVAIS.
+ As a consequence of this erratum, some TLB entries which should be
+ invalidated are not, resulting in an incoherency in the system page
+ tables. The workaround changes the TLB flushing routines to invalidate
+ entries regardless of the ASID.
+
+config ARM_ERRATA_743622
+ bool "ARM errata: Faulty hazard checking in the Store Buffer may lead to data corruption"
+ depends on CPU_V7
+ depends on !ARCH_MULTIPLATFORM
+ help
+ This option enables the workaround for the 743622 Cortex-A9
+ (r2p*) erratum. Under very rare conditions, a faulty
+ optimisation in the Cortex-A9 Store Buffer may lead to data
+ corruption. This workaround sets a specific bit in the diagnostic
+ register of the Cortex-A9 which disables the Store Buffer
+ optimisation, preventing the defect from occurring. This has no
+ visible impact on the overall performance or power consumption of the
+ processor.
+
+config ARM_ERRATA_751472
+ bool "ARM errata: Interrupted ICIALLUIS may prevent completion of broadcasted operation"
+ depends on CPU_V7
+ depends on !ARCH_MULTIPLATFORM
+ help
+ This option enables the workaround for the 751472 Cortex-A9 (prior
+ to r3p0) erratum. An interrupted ICIALLUIS operation may prevent the
+ completion of a following broadcasted operation if the second
+ operation is received by a CPU before the ICIALLUIS has completed,
+ potentially leading to corrupted entries in the cache or TLB.
+
+config ARM_ERRATA_754322
+ bool "ARM errata: possible faulty MMU translations following an ASID switch"
+ depends on CPU_V7
+ help
+ This option enables the workaround for the 754322 Cortex-A9 (r2p*,
+ r3p*) erratum. A speculative memory access may cause a page table walk
+ which starts prior to an ASID switch but completes afterwards. This
+ can populate the micro-TLB with a stale entry which may be hit with
+ the new ASID. This workaround places two dsb instructions in the mm
+ switching code so that no page table walks can cross the ASID switch.
+
+config ARM_ERRATA_754327
+ bool "ARM errata: no automatic Store Buffer drain"
+ depends on CPU_V7 && SMP
+ help
+ This option enables the workaround for the 754327 Cortex-A9 (prior to
+ r2p0) erratum. The Store Buffer does not have any automatic draining
+ mechanism and therefore a livelock may occur if an external agent
+ continuously polls a memory location waiting to observe an update.
+ This workaround defines cpu_relax() as smp_mb(), preventing correctly
+ written polling loops from denying visibility of updates to memory.
+
+config ARM_ERRATA_364296
+ bool "ARM errata: Possible cache data corruption with hit-under-miss enabled"
+ depends on CPU_V6
+ help
+ This options enables the workaround for the 364296 ARM1136
+ r0p2 erratum (possible cache data corruption with
+ hit-under-miss enabled). It sets the undocumented bit 31 in
+ the auxiliary control register and the FI bit in the control
+ register, thus disabling hit-under-miss without putting the
+ processor into full low interrupt latency mode. ARM11MPCore
+ is not affected.
+
+config ARM_ERRATA_764369
+ bool "ARM errata: Data cache line maintenance operation by MVA may not succeed"
+ depends on CPU_V7 && SMP
+ help
+ This option enables the workaround for erratum 764369
+ affecting Cortex-A9 MPCore with two or more processors (all
+ current revisions). Under certain timing circumstances, a data
+ cache line maintenance operation by MVA targeting an Inner
+ Shareable memory region may fail to proceed up to either the
+ Point of Coherency or to the Point of Unification of the
+ system. This workaround adds a DSB instruction before the
+ relevant cache maintenance functions and sets a specific bit
+ in the diagnostic control register of the SCU.
+
+config ARM_ERRATA_775420
+ bool "ARM errata: A data cache maintenance operation which aborts, might lead to deadlock"
+ depends on CPU_V7
+ help
+ This option enables the workaround for the 775420 Cortex-A9 (r2p2,
+ r2p6,r2p8,r2p10,r3p0) erratum. In case a date cache maintenance
+ operation aborts with MMU exception, it might cause the processor
+ to deadlock. This workaround puts DSB before executing ISB if
+ an abort may occur on cache maintenance.
+
+config ARM_ERRATA_798181
+ bool "ARM errata: TLBI/DSB failure on Cortex-A15"
+ depends on CPU_V7 && SMP
+ help
+ On Cortex-A15 (r0p0..r3p2) the TLBI*IS/DSB operations are not
+ adequately shooting down all use of the old entries. This
+ option enables the Linux kernel workaround for this erratum
+ which sends an IPI to the CPUs that are running the same ASID
+ as the one being invalidated.
+
+config ARM_ERRATA_773022
+ bool "ARM errata: incorrect instructions may be executed from loop buffer"
+ depends on CPU_V7
+ help
+ This option enables the workaround for the 773022 Cortex-A15
+ (up to r0p4) erratum. In certain rare sequences of code, the
+ loop buffer may deliver incorrect instructions. This
+ workaround disables the loop buffer to avoid the erratum.
+
+endmenu
+
+source "arch/arm/common/Kconfig"
+
+menu "Bus support"
+
+config ISA
+ bool
+ help
+ Find out whether you have ISA slots on your motherboard. ISA is the
+ name of a bus system, i.e. the way the CPU talks to the other stuff
+ inside your box. Other bus systems are PCI, EISA, MicroChannel
+ (MCA) or VESA. ISA is an older system, now being displaced by PCI;
+ newer boards don't support it. If you have ISA, say Y, otherwise N.
+
+# Select ISA DMA controller support
+config ISA_DMA
+ bool
+ select ISA_DMA_API
+
+# Select ISA DMA interface
+config ISA_DMA_API
+ bool
+
+config PCI
+ bool "PCI support" if MIGHT_HAVE_PCI
+ help
+ Find out whether you have a PCI motherboard. PCI is the name of a
+ bus system, i.e. the way the CPU talks to the other stuff inside
+ your box. Other bus systems are ISA, EISA, MicroChannel (MCA) or
+ VESA. If you have PCI, say Y, otherwise N.
+
+config PCI_DOMAINS
+ bool
+ depends on PCI
+
+config PCI_DOMAINS_GENERIC
+ def_bool PCI_DOMAINS
+
+config PCI_NANOENGINE
+ bool "BSE nanoEngine PCI support"
+ depends on SA1100_NANOENGINE
+ help
+ Enable PCI on the BSE nanoEngine board.
+
+config PCI_SYSCALL
+ def_bool PCI
+
+config PCI_HOST_ITE8152
+ bool
+ depends on PCI && MACH_ARMCORE
+ default y
+ select DMABOUNCE
+
+source "drivers/pci/Kconfig"
+source "drivers/pci/pcie/Kconfig"
+
+source "drivers/pcmcia/Kconfig"
+
+endmenu
+
+menu "Kernel Features"
+
+config HAVE_SMP
+ bool
+ help
+ This option should be selected by machines which have an SMP-
+ capable CPU.
+
+ The only effect of this option is to make the SMP-related
+ options available to the user for configuration.
+
+config SMP
+ bool "Symmetric Multi-Processing"
+ depends on CPU_V6K || CPU_V7
+ depends on GENERIC_CLOCKEVENTS
+ depends on HAVE_SMP
+ depends on MMU || ARM_MPU
+ help
+ This enables support for systems with more than one CPU. If you have
+ a system with only one CPU, say N. If you have a system with more
+ than one CPU, say Y.
+
+ If you say N here, the kernel will run on uni- and multiprocessor
+ machines, but will use only one CPU of a multiprocessor machine. If
+ you say Y here, the kernel will run on many, but not all,
+ uniprocessor machines. On a uniprocessor machine, the kernel
+ will run faster if you say N here.
+
+ See also <file:Documentation/x86/i386/IO-APIC.txt>,
+ <file:Documentation/nmi_watchdog.txt> and the SMP-HOWTO available at
+ <http://tldp.org/HOWTO/SMP-HOWTO.html>.
+
+ If you don't know what to do here, say N.
+
+config SMP_ON_UP
+ bool "Allow booting SMP kernel on uniprocessor systems"
+ depends on SMP && !XIP_KERNEL && MMU
+ default y
+ help
+ SMP kernels contain instructions which fail on non-SMP processors.
+ Enabling this option allows the kernel to modify itself to make
+ these instructions safe. Disabling it allows about 1K of space
+ savings.
+
+ If you don't know what to do here, say Y.
+
+config ARM_CPU_TOPOLOGY
+ bool "Support cpu topology definition"
+ depends on SMP && CPU_V7
+ default y
+ help
+ Support ARM cpu topology definition. The MPIDR register defines
+ affinity between processors which is then used to describe the cpu
+ topology of an ARM System.
+
+config SCHED_MC
+ bool "Multi-core scheduler support"
+ depends on ARM_CPU_TOPOLOGY
+ help
+ Multi-core scheduler support improves the CPU scheduler's decision
+ making when dealing with multi-core CPU chips at a cost of slightly
+ increased overhead in some places. If unsure say N here.
+
+config SCHED_SMT
+ bool "SMT scheduler support"
+ depends on ARM_CPU_TOPOLOGY
+ help
+ Improves the CPU scheduler's decision making when dealing with
+ MultiThreading at a cost of slightly increased overhead in some
+ places. If unsure say N here.
+
+config HAVE_ARM_SCU
+ bool
+ help
+ This option enables support for the ARM system coherency unit
+
+config HAVE_ARM_ARCH_TIMER
+ bool "Architected timer support"
+ depends on CPU_V7
+ select ARM_ARCH_TIMER
+ select GENERIC_CLOCKEVENTS
+ help
+ This option enables support for the ARM architected timer
+
+config HAVE_ARM_TWD
+ bool
+ depends on SMP
+ select CLKSRC_OF if OF
+ help
+ This options enables support for the ARM timer and watchdog unit
+
+config MCPM
+ bool "Multi-Cluster Power Management"
+ depends on CPU_V7 && SMP
+ help
+ This option provides the common power management infrastructure
+ for (multi-)cluster based systems, such as big.LITTLE based
+ systems.
+
+config MCPM_QUAD_CLUSTER
+ bool
+ depends on MCPM
+ help
+ To avoid wasting resources unnecessarily, MCPM only supports up
+ to 2 clusters by default.
+ Platforms with 3 or 4 clusters that use MCPM must select this
+ option to allow the additional clusters to be managed.
+
+config BIG_LITTLE
+ bool "big.LITTLE support (Experimental)"
+ depends on CPU_V7 && SMP
+ select MCPM
+ help
+ This option enables support selections for the big.LITTLE
+ system architecture.
+
+config BL_SWITCHER
+ bool "big.LITTLE switcher support"
+ depends on BIG_LITTLE && MCPM && HOTPLUG_CPU
+ select ARM_CPU_SUSPEND
+ select CPU_PM
+ help
+ The big.LITTLE "switcher" provides the core functionality to
+ transparently handle transition between a cluster of A15's
+ and a cluster of A7's in a big.LITTLE system.
+
+config BL_SWITCHER_DUMMY_IF
+ tristate "Simple big.LITTLE switcher user interface"
+ depends on BL_SWITCHER && DEBUG_KERNEL
+ help
+ This is a simple and dummy char dev interface to control
+ the big.LITTLE switcher core code. It is meant for
+ debugging purposes only.
+
+choice
+ prompt "Memory split"
+ depends on MMU
+ default VMSPLIT_3G
+ help
+ Select the desired split between kernel and user memory.
+
+ If you are not absolutely sure what you are doing, leave this
+ option alone!
+
+ config VMSPLIT_3G
+ bool "3G/1G user/kernel split"
+ config VMSPLIT_2G
+ bool "2G/2G user/kernel split"
+ config VMSPLIT_1G
+ bool "1G/3G user/kernel split"
+endchoice
+
+config PAGE_OFFSET
+ hex
+ default PHYS_OFFSET if !MMU
+ default 0x40000000 if VMSPLIT_1G
+ default 0x80000000 if VMSPLIT_2G
+ default 0xC0000000
+
+config NR_CPUS
+ int "Maximum number of CPUs (2-32)"
+ range 2 32
+ depends on SMP
+ default "4"
+
+config HOTPLUG_CPU
+ bool "Support for hot-pluggable CPUs"
+ depends on SMP
+ help
+ Say Y here to experiment with turning CPUs off and on. CPUs
+ can be controlled through /sys/devices/system/cpu.
+
+config ARM_PSCI
+ bool "Support for the ARM Power State Coordination Interface (PSCI)"
+ depends on CPU_V7
+ help
+ Say Y here if you want Linux to communicate with system firmware
+ implementing the PSCI specification for CPU-centric power
+ management operations described in ARM document number ARM DEN
+ 0022A ("Power State Coordination Interface System Software on
+ ARM processors").
+
+# The GPIO number here must be sorted by descending number. In case of
+# a multiplatform kernel, we just want the highest value required by the
+# selected platforms.
+config ARCH_NR_GPIO
+ int
+ default 1024 if ARCH_SHMOBILE || ARCH_TEGRA || ARCH_ZYNQ
+ default 512 if ARCH_EXYNOS || ARCH_KEYSTONE || SOC_OMAP5 || \
+ SOC_DRA7XX || ARCH_S3C24XX || ARCH_S3C64XX || ARCH_S5PV210
+ default 416 if ARCH_SUNXI
+ default 392 if ARCH_U8500
+ default 352 if ARCH_VT8500
+ default 288 if ARCH_ROCKCHIP
+ default 264 if MACH_H4700
+ default 0
+ help
+ Maximum number of GPIOs in the system.
+
+ If unsure, leave the default value.
+
+source kernel/Kconfig.preempt
+
+config HZ_FIXED
+ int
+ default 200 if ARCH_EBSA110 || ARCH_S3C24XX || \
+ ARCH_S5PV210 || ARCH_EXYNOS4
+ default 128 if SOC_AT91RM9200
+ default SHMOBILE_TIMER_HZ if ARCH_SHMOBILE_LEGACY
+ default 0
+
+choice
+ depends on HZ_FIXED = 0
+ prompt "Timer frequency"
+
+config HZ_100
+ bool "100 Hz"
+
+config HZ_200
+ bool "200 Hz"
+
+config HZ_250
+ bool "250 Hz"
+
+config HZ_300
+ bool "300 Hz"
+
+config HZ_500
+ bool "500 Hz"
+
+config HZ_1000
+ bool "1000 Hz"
+
+endchoice
+
+config HZ
+ int
+ default HZ_FIXED if HZ_FIXED != 0
+ default 100 if HZ_100
+ default 200 if HZ_200
+ default 250 if HZ_250
+ default 300 if HZ_300
+ default 500 if HZ_500
+ default 1000
+
+config SCHED_HRTICK
+ def_bool HIGH_RES_TIMERS
+
+config THUMB2_KERNEL
+ bool "Compile the kernel in Thumb-2 mode" if !CPU_THUMBONLY
+ depends on (CPU_V7 || CPU_V7M) && !CPU_V6 && !CPU_V6K
+ default y if CPU_THUMBONLY
+ select AEABI
+ select ARM_ASM_UNIFIED
+ select ARM_UNWIND
+ help
+ By enabling this option, the kernel will be compiled in
+ Thumb-2 mode. A compiler/assembler that understand the unified
+ ARM-Thumb syntax is needed.
+
+ If unsure, say N.
+
+config THUMB2_AVOID_R_ARM_THM_JUMP11
+ bool "Work around buggy Thumb-2 short branch relocations in gas"
+ depends on THUMB2_KERNEL && MODULES
+ default y
+ help
+ Various binutils versions can resolve Thumb-2 branches to
+ locally-defined, preemptible global symbols as short-range "b.n"
+ branch instructions.
+
+ This is a problem, because there's no guarantee the final
+ destination of the symbol, or any candidate locations for a
+ trampoline, are within range of the branch. For this reason, the
+ kernel does not support fixing up the R_ARM_THM_JUMP11 (102)
+ relocation in modules at all, and it makes little sense to add
+ support.
+
+ The symptom is that the kernel fails with an "unsupported
+ relocation" error when loading some modules.
+
+ Until fixed tools are available, passing
+ -fno-optimize-sibling-calls to gcc should prevent gcc generating
+ code which hits this problem, at the cost of a bit of extra runtime
+ stack usage in some cases.
+
+ The problem is described in more detail at:
+ https://bugs.launchpad.net/binutils-linaro/+bug/725126
+
+ Only Thumb-2 kernels are affected.
+
+ Unless you are sure your tools don't have this problem, say Y.
+
+config ARM_ASM_UNIFIED
+ bool
+
+config AEABI
+ bool "Use the ARM EABI to compile the kernel"
+ help
+ This option allows for the kernel to be compiled using the latest
+ ARM ABI (aka EABI). This is only useful if you are using a user
+ space environment that is also compiled with EABI.
+
+ Since there are major incompatibilities between the legacy ABI and
+ EABI, especially with regard to structure member alignment, this
+ option also changes the kernel syscall calling convention to
+ disambiguate both ABIs and allow for backward compatibility support
+ (selected with CONFIG_OABI_COMPAT).
+
+ To use this you need GCC version 4.0.0 or later.
+
+config OABI_COMPAT
+ bool "Allow old ABI binaries to run with this kernel (EXPERIMENTAL)"
+ depends on AEABI && !THUMB2_KERNEL
+ help
+ This option preserves the old syscall interface along with the
+ new (ARM EABI) one. It also provides a compatibility layer to
+ intercept syscalls that have structure arguments which layout
+ in memory differs between the legacy ABI and the new ARM EABI
+ (only for non "thumb" binaries). This option adds a tiny
+ overhead to all syscalls and produces a slightly larger kernel.
+
+ The seccomp filter system will not be available when this is
+ selected, since there is no way yet to sensibly distinguish
+ between calling conventions during filtering.
+
+ If you know you'll be using only pure EABI user space then you
+ can say N here. If this option is not selected and you attempt
+ to execute a legacy ABI binary then the result will be
+ UNPREDICTABLE (in fact it can be predicted that it won't work
+ at all). If in doubt say N.
+
+config ARCH_HAS_HOLES_MEMORYMODEL
+ bool
+
+config ARCH_SPARSEMEM_ENABLE
+ bool
+
+config ARCH_SPARSEMEM_DEFAULT
+ def_bool ARCH_SPARSEMEM_ENABLE
+
+config ARCH_SELECT_MEMORY_MODEL
+ def_bool ARCH_SPARSEMEM_ENABLE
+
+config HAVE_ARCH_PFN_VALID
+ def_bool ARCH_HAS_HOLES_MEMORYMODEL || !SPARSEMEM
+
+config HAVE_GENERIC_RCU_GUP
+ def_bool y
+ depends on ARM_LPAE
+
+config HIGHMEM
+ bool "High Memory Support"
+ depends on MMU
+ help
+ The address space of ARM processors is only 4 Gigabytes large
+ and it has to accommodate user address space, kernel address
+ space as well as some memory mapped IO. That means that, if you
+ have a large amount of physical memory and/or IO, not all of the
+ memory can be "permanently mapped" by the kernel. The physical
+ memory that is not permanently mapped is called "high memory".
+
+ Depending on the selected kernel/user memory split, minimum
+ vmalloc space and actual amount of RAM, you may not need this
+ option which should result in a slightly faster kernel.
+
+ If unsure, say n.
+
+config HIGHPTE
+ bool "Allocate 2nd-level pagetables from highmem"
+ depends on HIGHMEM
+
+config HW_PERF_EVENTS
+ bool "Enable hardware performance counter support for perf events"
+ depends on PERF_EVENTS
+ default y
+ help
+ Enable hardware performance counter support for perf events. If
+ disabled, perf events will use software events only.
+
+config SYS_SUPPORTS_HUGETLBFS
+ def_bool y
+ depends on ARM_LPAE
+
+config HAVE_ARCH_TRANSPARENT_HUGEPAGE
+ def_bool y
+ depends on ARM_LPAE
+
+config ARCH_WANT_GENERAL_HUGETLB
+ def_bool y
+
+source "mm/Kconfig"
+
+config FORCE_MAX_ZONEORDER
+ int "Maximum zone order" if ARCH_SHMOBILE_LEGACY
+ range 11 64 if ARCH_SHMOBILE_LEGACY
+ default "12" if SOC_AM33XX
+ default "9" if SA1111 || ARCH_EFM32
+ default "11"
+ help
+ The kernel memory allocator divides physically contiguous memory
+ blocks into "zones", where each zone is a power of two number of
+ pages. This option selects the largest power of two that the kernel
+ keeps in the memory allocator. If you need to allocate very large
+ blocks of physically contiguous memory, then you may need to
+ increase this value.
+
+ This config option is actually maximum order plus one. For example,
+ a value of 11 means that the largest free memory block is 2^10 pages.
+
+config ALIGNMENT_TRAP
+ bool
+ depends on CPU_CP15_MMU
+ default y if !ARCH_EBSA110
+ select HAVE_PROC_CPU if PROC_FS
+ help
+ ARM processors cannot fetch/store information which is not
+ naturally aligned on the bus, i.e., a 4 byte fetch must start at an
+ address divisible by 4. On 32-bit ARM processors, these non-aligned
+ fetch/store instructions will be emulated in software if you say
+ here, which has a severe performance impact. This is necessary for
+ correct operation of some network protocols. With an IP-only
+ configuration it is safe to say N, otherwise say Y.
+
+config UACCESS_WITH_MEMCPY
+ bool "Use kernel mem{cpy,set}() for {copy_to,clear}_user()"
+ depends on MMU
+ default y if CPU_FEROCEON
+ help
+ Implement faster copy_to_user and clear_user methods for CPU
+ cores where a 8-word STM instruction give significantly higher
+ memory write throughput than a sequence of individual 32bit stores.
+
+ A possible side effect is a slight increase in scheduling latency
+ between threads sharing the same address space if they invoke
+ such copy operations with large buffers.
+
+ However, if the CPU data cache is using a write-allocate mode,
+ this option is unlikely to provide any performance gain.
+
+config SECCOMP
+ bool
+ prompt "Enable seccomp to safely compute untrusted bytecode"
+ ---help---
+ This kernel feature is useful for number crunching applications
+ that may need to compute untrusted bytecode during their
+ execution. By using pipes or other transports made available to
+ the process as file descriptors supporting the read/write
+ syscalls, it's possible to isolate those applications in
+ their own address space using seccomp. Once seccomp is
+ enabled via prctl(PR_SET_SECCOMP), it cannot be disabled
+ and the task is only allowed to execute a few safe syscalls
+ defined by each seccomp mode.
+
+config SWIOTLB
+ def_bool y
+
+config IOMMU_HELPER
+ def_bool SWIOTLB
+
+config XEN_DOM0
+ def_bool y
+ depends on XEN
+
+config XEN
+ bool "Xen guest support on ARM"
+ depends on ARM && AEABI && OF
+ depends on CPU_V7 && !CPU_V6
+ depends on !GENERIC_ATOMIC64
+ depends on MMU
+ select ARCH_DMA_ADDR_T_64BIT
+ select ARM_PSCI
+ select SWIOTLB_XEN
+ help
+ Say Y if you want to run Linux in a Virtual Machine on Xen on ARM.
+
+endmenu
+
+menu "Boot options"
+
+config USE_OF
+ bool "Flattened Device Tree support"
+ select IRQ_DOMAIN
+ select OF
+ select OF_EARLY_FLATTREE
+ select OF_RESERVED_MEM
+ help
+ Include support for flattened device tree machine descriptions.
+
+config ATAGS
+ bool "Support for the traditional ATAGS boot data passing" if USE_OF
+ default y
+ help
+ This is the traditional way of passing data to the kernel at boot
+ time. If you are solely relying on the flattened device tree (or
+ the ARM_ATAG_DTB_COMPAT option) then you may unselect this option
+ to remove ATAGS support from your kernel binary. If unsure,
+ leave this to y.
+
+config DEPRECATED_PARAM_STRUCT
+ bool "Provide old way to pass kernel parameters"
+ depends on ATAGS
+ help
+ This was deprecated in 2001 and announced to live on for 5 years.
+ Some old boot loaders still use this way.
+
+# Compressed boot loader in ROM. Yes, we really want to ask about
+# TEXT and BSS so we preserve their values in the config files.
+config ZBOOT_ROM_TEXT
+ hex "Compressed ROM boot loader base address"
+ default "0"
+ help
+ The physical address at which the ROM-able zImage is to be
+ placed in the target. Platforms which normally make use of
+ ROM-able zImage formats normally set this to a suitable
+ value in their defconfig file.
+
+ If ZBOOT_ROM is not enabled, this has no effect.
+
+config ZBOOT_ROM_BSS
+ hex "Compressed ROM boot loader BSS address"
+ default "0"
+ help
+ The base address of an area of read/write memory in the target
+ for the ROM-able zImage which must be available while the
+ decompressor is running. It must be large enough to hold the
+ entire decompressed kernel plus an additional 128 KiB.
+ Platforms which normally make use of ROM-able zImage formats
+ normally set this to a suitable value in their defconfig file.
+
+ If ZBOOT_ROM is not enabled, this has no effect.
+
+config ZBOOT_ROM
+ bool "Compressed boot loader in ROM/flash"
+ depends on ZBOOT_ROM_TEXT != ZBOOT_ROM_BSS
+ depends on !ARM_APPENDED_DTB && !XIP_KERNEL && !AUTO_ZRELADDR
+ help
+ Say Y here if you intend to execute your compressed kernel image
+ (zImage) directly from ROM or flash. If unsure, say N.
+
+config ARM_APPENDED_DTB
+ bool "Use appended device tree blob to zImage (EXPERIMENTAL)"
+ depends on OF
+ help
+ With this option, the boot code will look for a device tree binary
+ (DTB) appended to zImage
+ (e.g. cat zImage <filename>.dtb > zImage_w_dtb).
+
+ This is meant as a backward compatibility convenience for those
+ systems with a bootloader that can't be upgraded to accommodate
+ the documented boot protocol using a device tree.
+
+ Beware that there is very little in terms of protection against
+ this option being confused by leftover garbage in memory that might
+ look like a DTB header after a reboot if no actual DTB is appended
+ to zImage. Do not leave this option active in a production kernel
+ if you don't intend to always append a DTB. Proper passing of the
+ location into r2 of a bootloader provided DTB is always preferable
+ to this option.
+
+config ARM_ATAG_DTB_COMPAT
+ bool "Supplement the appended DTB with traditional ATAG information"
+ depends on ARM_APPENDED_DTB
+ help
+ Some old bootloaders can't be updated to a DTB capable one, yet
+ they provide ATAGs with memory configuration, the ramdisk address,
+ the kernel cmdline string, etc. Such information is dynamically
+ provided by the bootloader and can't always be stored in a static
+ DTB. To allow a device tree enabled kernel to be used with such
+ bootloaders, this option allows zImage to extract the information
+ from the ATAG list and store it at run time into the appended DTB.
+
+choice
+ prompt "Kernel command line type" if ARM_ATAG_DTB_COMPAT
+ default ARM_ATAG_DTB_COMPAT_CMDLINE_FROM_BOOTLOADER
+
+config ARM_ATAG_DTB_COMPAT_CMDLINE_FROM_BOOTLOADER
+ bool "Use bootloader kernel arguments if available"
+ help
+ Uses the command-line options passed by the boot loader instead of
+ the device tree bootargs property. If the boot loader doesn't provide
+ any, the device tree bootargs property will be used.
+
+config ARM_ATAG_DTB_COMPAT_CMDLINE_EXTEND
+ bool "Extend with bootloader kernel arguments"
+ help
+ The command-line arguments provided by the boot loader will be
+ appended to the the device tree bootargs property.
+
+endchoice
+
+config CMDLINE
+ string "Default kernel command string"
+ default ""
+ help
+ On some architectures (EBSA110 and CATS), there is currently no way
+ for the boot loader to pass arguments to the kernel. For these
+ architectures, you should supply some command-line options at build
+ time by entering them here. As a minimum, you should specify the
+ memory size and the root device (e.g., mem=64M root=/dev/nfs).
+
+choice
+ prompt "Kernel command line type" if CMDLINE != ""
+ default CMDLINE_FROM_BOOTLOADER
+ depends on ATAGS
+
+config CMDLINE_FROM_BOOTLOADER
+ bool "Use bootloader kernel arguments if available"
+ help
+ Uses the command-line options passed by the boot loader. If
+ the boot loader doesn't provide any, the default kernel command
+ string provided in CMDLINE will be used.
+
+config CMDLINE_EXTEND
+ bool "Extend bootloader kernel arguments"
+ help
+ The command-line arguments provided by the boot loader will be
+ appended to the default kernel command string.
+
+config CMDLINE_FORCE
+ bool "Always use the default kernel command string"
+ help
+ Always use the default kernel command string, even if the boot
+ loader passes other arguments to the kernel.
+ This is useful if you cannot or don't want to change the
+ command-line options your boot loader passes to the kernel.
+endchoice
+
+config XIP_KERNEL
+ bool "Kernel Execute-In-Place from ROM"
+ depends on !ARM_LPAE && !ARCH_MULTIPLATFORM
+ help
+ Execute-In-Place allows the kernel to run from non-volatile storage
+ directly addressable by the CPU, such as NOR flash. This saves RAM
+ space since the text section of the kernel is not loaded from flash
+ to RAM. Read-write sections, such as the data section and stack,
+ are still copied to RAM. The XIP kernel is not compressed since
+ it has to run directly from flash, so it will take more space to
+ store it. The flash address used to link the kernel object files,
+ and for storing it, is configuration dependent. Therefore, if you
+ say Y here, you must know the proper physical address where to
+ store the kernel image depending on your own flash memory usage.
+
+ Also note that the make target becomes "make xipImage" rather than
+ "make zImage" or "make Image". The final kernel binary to put in
+ ROM memory will be arch/arm/boot/xipImage.
+
+ If unsure, say N.
+
+config XIP_PHYS_ADDR
+ hex "XIP Kernel Physical Location"
+ depends on XIP_KERNEL
+ default "0x00080000"
+ help
+ This is the physical address in your flash memory the kernel will
+ be linked for and stored to. This address is dependent on your
+ own flash usage.
+
+config KEXEC
+ bool "Kexec system call (EXPERIMENTAL)"
+ depends on (!SMP || PM_SLEEP_SMP)
+ help
+ kexec is a system call that implements the ability to shutdown your
+ current kernel, and to start another kernel. It is like a reboot
+ but it is independent of the system firmware. And like a reboot
+ you can start any kernel with it, not just Linux.
+
+ It is an ongoing process to be certain the hardware in a machine
+ is properly shutdown, so do not be surprised if this code does not
+ initially work for you.
+
+config ATAGS_PROC
+ bool "Export atags in procfs"
+ depends on ATAGS && KEXEC
+ default y
+ help
+ Should the atags used to boot the kernel be exported in an "atags"
+ file in procfs. Useful with kexec.
+
+config CRASH_DUMP
+ bool "Build kdump crash kernel (EXPERIMENTAL)"
+ help
+ Generate crash dump after being started by kexec. This should
+ be normally only set in special crash dump kernels which are
+ loaded in the main kernel with kexec-tools into a specially
+ reserved region and then later executed after a crash by
+ kdump/kexec. The crash dump kernel must be compiled to a
+ memory address not used by the main kernel
+
+ For more details see Documentation/kdump/kdump.txt
+
+config AUTO_ZRELADDR
+ bool "Auto calculation of the decompressed kernel image address"
+ help
+ ZRELADDR is the physical address where the decompressed kernel
+ image will be placed. If AUTO_ZRELADDR is selected, the address
+ will be determined at run-time by masking the current IP with
+ 0xf8000000. This assumes the zImage being placed in the first 128MB
+ from start of memory.
+
+endmenu
+
+menu "CPU Power Management"
+
+source "drivers/cpufreq/Kconfig"
+
+source "drivers/cpuidle/Kconfig"
+
+endmenu
+
+menu "Floating point emulation"
+
+comment "At least one emulation must be selected"
+
+config FPE_NWFPE
+ bool "NWFPE math emulation"
+ depends on (!AEABI || OABI_COMPAT) && !THUMB2_KERNEL
+ ---help---
+ Say Y to include the NWFPE floating point emulator in the kernel.
+ This is necessary to run most binaries. Linux does not currently
+ support floating point hardware so you need to say Y here even if
+ your machine has an FPA or floating point co-processor podule.
+
+ You may say N here if you are going to load the Acorn FPEmulator
+ early in the bootup.
+
+config FPE_NWFPE_XP
+ bool "Support extended precision"
+ depends on FPE_NWFPE
+ help
+ Say Y to include 80-bit support in the kernel floating-point
+ emulator. Otherwise, only 32 and 64-bit support is compiled in.
+ Note that gcc does not generate 80-bit operations by default,
+ so in most cases this option only enlarges the size of the
+ floating point emulator without any good reason.
+
+ You almost surely want to say N here.
+
+config FPE_FASTFPE
+ bool "FastFPE math emulation (EXPERIMENTAL)"
+ depends on (!AEABI || OABI_COMPAT) && !CPU_32v3
+ ---help---
+ Say Y here to include the FAST floating point emulator in the kernel.
+ This is an experimental much faster emulator which now also has full
+ precision for the mantissa. It does not support any exceptions.
+ It is very simple, and approximately 3-6 times faster than NWFPE.
+
+ It should be sufficient for most programs. It may be not suitable
+ for scientific calculations, but you have to check this for yourself.
+ If you do not feel you need a faster FP emulation you should better
+ choose NWFPE.
+
+config VFP
+ bool "VFP-format floating point maths"
+ depends on CPU_V6 || CPU_V6K || CPU_ARM926T || CPU_V7 || CPU_FEROCEON
+ help
+ Say Y to include VFP support code in the kernel. This is needed
+ if your hardware includes a VFP unit.
+
+ Please see <file:Documentation/arm/VFP/release-notes.txt> for
+ release notes and additional status information.
+
+ Say N if your target does not have VFP hardware.
+
+config VFPv3
+ bool
+ depends on VFP
+ default y if CPU_V7
+
+config NEON
+ bool "Advanced SIMD (NEON) Extension support"
+ depends on VFPv3 && CPU_V7
+ help
+ Say Y to include support code for NEON, the ARMv7 Advanced SIMD
+ Extension.
+
+config KERNEL_MODE_NEON
+ bool "Support for NEON in kernel mode"
+ depends on NEON && AEABI
+ help
+ Say Y to include support for NEON in kernel mode.
+
+endmenu
+
+menu "Userspace binary formats"
+
+source "fs/Kconfig.binfmt"
+
+endmenu
+
+menu "Power management options"
+
+source "kernel/power/Kconfig"
+
+config ARCH_SUSPEND_POSSIBLE
+ depends on CPU_ARM920T || CPU_ARM926T || CPU_FEROCEON || CPU_SA1100 || \
+ CPU_V6 || CPU_V6K || CPU_V7 || CPU_V7M || CPU_XSC3 || CPU_XSCALE || CPU_MOHAWK
+ def_bool y
+
+config ARM_CPU_SUSPEND
+ def_bool PM_SLEEP
+
+config ARCH_HIBERNATION_POSSIBLE
+ bool
+ depends on MMU
+ default y if ARCH_SUSPEND_POSSIBLE
+
+endmenu
+
+source "net/Kconfig"
+
+source "drivers/Kconfig"
+
+source "drivers/firmware/Kconfig"
+
+source "fs/Kconfig"
+
+source "arch/arm/Kconfig.debug"
+
+source "security/Kconfig"
+
+source "crypto/Kconfig"
+if CRYPTO
+source "arch/arm/crypto/Kconfig"
+endif
+
+source "lib/Kconfig"
+
+source "arch/arm/kvm/Kconfig"