diff options
Diffstat (limited to 'kernel/arch/arc/Kconfig')
| -rw-r--r-- | kernel/arch/arc/Kconfig | 431 |
1 files changed, 431 insertions, 0 deletions
diff --git a/kernel/arch/arc/Kconfig b/kernel/arch/arc/Kconfig new file mode 100644 index 000000000..df94ac1f7 --- /dev/null +++ b/kernel/arch/arc/Kconfig @@ -0,0 +1,431 @@ +# +# Copyright (C) 2004, 2007-2010, 2011-2012 Synopsys, Inc. (www.synopsys.com) +# +# This program is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License version 2 as +# published by the Free Software Foundation. +# + +config ARC + def_bool y + select BUILDTIME_EXTABLE_SORT + select COMMON_CLK + select CLONE_BACKWARDS + # ARC Busybox based initramfs absolutely relies on DEVTMPFS for /dev + select DEVTMPFS if !INITRAMFS_SOURCE="" + select GENERIC_ATOMIC64 + select GENERIC_CLOCKEVENTS + select GENERIC_FIND_FIRST_BIT + # for now, we don't need GENERIC_IRQ_PROBE, CONFIG_GENERIC_IRQ_CHIP + select GENERIC_IRQ_SHOW + select GENERIC_PENDING_IRQ if SMP + select GENERIC_SMP_IDLE_THREAD + select HAVE_ARCH_KGDB + select HAVE_ARCH_TRACEHOOK + select HAVE_IOREMAP_PROT + select HAVE_KPROBES + select HAVE_KRETPROBES + select HAVE_MEMBLOCK + select HAVE_MOD_ARCH_SPECIFIC if ARC_DW2_UNWIND + select HAVE_OPROFILE + select HAVE_PERF_EVENTS + select IRQ_DOMAIN + select MODULES_USE_ELF_RELA + select NO_BOOTMEM + select OF + select OF_EARLY_FLATTREE + select PERF_USE_VMALLOC + select HAVE_DEBUG_STACKOVERFLOW + +config TRACE_IRQFLAGS_SUPPORT + def_bool y + +config LOCKDEP_SUPPORT + def_bool y + +config SCHED_OMIT_FRAME_POINTER + def_bool y + +config GENERIC_CSUM + def_bool y + +config RWSEM_GENERIC_SPINLOCK + def_bool y + +config ARCH_FLATMEM_ENABLE + def_bool y + +config MMU + def_bool y + +config NO_IOPORT_MAP + def_bool y + +config GENERIC_CALIBRATE_DELAY + def_bool y + +config GENERIC_HWEIGHT + def_bool y + +config STACKTRACE_SUPPORT + def_bool y + select STACKTRACE + +config HAVE_LATENCYTOP_SUPPORT + def_bool y + +source "init/Kconfig" +source "kernel/Kconfig.freezer" + +menu "ARC Architecture Configuration" + +menu "ARC Platform/SoC/Board" + +source "arch/arc/plat-arcfpga/Kconfig" +source "arch/arc/plat-tb10x/Kconfig" +#New platform adds here + +endmenu + +menu "ARC CPU Configuration" + +choice + prompt "ARC Core" + default ARC_CPU_770 + +config ARC_CPU_750D + bool "ARC750D" + help + Support for ARC750 core + +config ARC_CPU_770 + bool "ARC770" + select ARC_CPU_REL_4_10 + help + Support for ARC770 core introduced with Rel 4.10 (Summer 2011) + This core has a bunch of cool new features: + -MMU-v3: Variable Page Sz (4k, 8k, 16k), bigger J-TLB (128x4) + Shared Address Spaces (for sharing TLB entires in MMU) + -Caches: New Prog Model, Region Flush + -Insns: endian swap, load-locked/store-conditional, time-stamp-ctr + +endchoice + +config CPU_BIG_ENDIAN + bool "Enable Big Endian Mode" + default n + help + Build kernel for Big Endian Mode of ARC CPU + +# If a platform can't work with 0x8000_0000 based dma_addr_t +config ARC_PLAT_NEEDS_CPU_TO_DMA + bool + +config SMP + bool "Symmetric Multi-Processing (Incomplete)" + default n + help + This enables support for systems with more than one CPU. If you have + a system with only one CPU, say N. If you have a system with more + than one CPU, say Y. + +if SMP + +config ARC_HAS_COH_CACHES + def_bool n + +config ARC_HAS_REENTRANT_IRQ_LV2 + def_bool n + +endif + +config NR_CPUS + int "Maximum number of CPUs (2-4096)" + range 2 4096 + depends on SMP + default "2" + +menuconfig ARC_CACHE + bool "Enable Cache Support" + default y + # if SMP, cache enabled ONLY if ARC implementation has cache coherency + depends on !SMP || ARC_HAS_COH_CACHES + +if ARC_CACHE + +config ARC_CACHE_LINE_SHIFT + int "Cache Line Length (as power of 2)" + range 5 7 + default "6" + help + Starting with ARC700 4.9, Cache line length is configurable, + This option specifies "N", with Line-len = 2 power N + So line lengths of 32, 64, 128 are specified by 5,6,7, respectively + Linux only supports same line lengths for I and D caches. + +config ARC_HAS_ICACHE + bool "Use Instruction Cache" + default y + +config ARC_HAS_DCACHE + bool "Use Data Cache" + default y + +config ARC_CACHE_PAGES + bool "Per Page Cache Control" + default y + depends on ARC_HAS_ICACHE || ARC_HAS_DCACHE + help + This can be used to over-ride the global I/D Cache Enable on a + per-page basis (but only for pages accessed via MMU such as + Kernel Virtual address or User Virtual Address) + TLB entries have a per-page Cache Enable Bit. + Note that Global I/D ENABLE + Per Page DISABLE works but corollary + Global DISABLE + Per Page ENABLE won't work + +config ARC_CACHE_VIPT_ALIASING + bool "Support VIPT Aliasing D$" + depends on ARC_HAS_DCACHE + default n + +endif #ARC_CACHE + +config ARC_HAS_ICCM + bool "Use ICCM" + help + Single Cycle RAMS to store Fast Path Code + default n + +config ARC_ICCM_SZ + int "ICCM Size in KB" + default "64" + depends on ARC_HAS_ICCM + +config ARC_HAS_DCCM + bool "Use DCCM" + help + Single Cycle RAMS to store Fast Path Data + default n + +config ARC_DCCM_SZ + int "DCCM Size in KB" + default "64" + depends on ARC_HAS_DCCM + +config ARC_DCCM_BASE + hex "DCCM map address" + default "0xA0000000" + depends on ARC_HAS_DCCM + +config ARC_HAS_HW_MPY + bool "Use Hardware Multiplier (Normal or Faster XMAC)" + default y + help + Influences how gcc generates code for MPY operations. + If enabled, MPYxx insns are generated, provided by Standard/XMAC + Multipler. Otherwise software multipy lib is used + +choice + prompt "ARC700 MMU Version" + default ARC_MMU_V3 if ARC_CPU_770 + default ARC_MMU_V2 if ARC_CPU_750D + +config ARC_MMU_V1 + bool "MMU v1" + help + Orig ARC700 MMU + +config ARC_MMU_V2 + bool "MMU v2" + help + Fixed the deficiency of v1 - possible thrashing in memcpy sceanrio + when 2 D-TLB and 1 I-TLB entries index into same 2way set. + +config ARC_MMU_V3 + bool "MMU v3" + depends on ARC_CPU_770 + help + Introduced with ARC700 4.10: New Features + Variable Page size (1k-16k), var JTLB size 128 x (2 or 4) + Shared Address Spaces (SASID) + +endchoice + + +choice + prompt "MMU Page Size" + default ARC_PAGE_SIZE_8K + +config ARC_PAGE_SIZE_8K + bool "8KB" + help + Choose between 8k vs 16k + +config ARC_PAGE_SIZE_16K + bool "16KB" + depends on ARC_MMU_V3 + +config ARC_PAGE_SIZE_4K + bool "4KB" + depends on ARC_MMU_V3 + +endchoice + +config ARC_COMPACT_IRQ_LEVELS + bool "ARCompact IRQ Priorities: High(2)/Low(1)" + default n + # Timer HAS to be high priority, for any other high priority config + select ARC_IRQ3_LV2 + # if SMP, LV2 enabled ONLY if ARC implementation has LV2 re-entrancy + depends on !SMP || ARC_HAS_REENTRANT_IRQ_LV2 + +if ARC_COMPACT_IRQ_LEVELS + +config ARC_IRQ3_LV2 + bool + +config ARC_IRQ5_LV2 + bool + +config ARC_IRQ6_LV2 + bool + +endif + +config ARC_FPU_SAVE_RESTORE + bool "Enable FPU state persistence across context switch" + default n + help + Double Precision Floating Point unit had dedictaed regs which + need to be saved/restored across context-switch. + Note that ARC FPU is overly simplistic, unlike say x86, which has + hardware pieces to allow software to conditionally save/restore, + based on actual usage of FPU by a task. Thus our implemn does + this for all tasks in system. + +config ARC_CANT_LLSC + def_bool n + +menuconfig ARC_CPU_REL_4_10 + bool "Enable support for Rel 4.10 features" + default n + help + -ARC770 (and dependent features) enabled + -ARC750 also shares some of the new features with 770 + +config ARC_HAS_LLSC + bool "Insn: LLOCK/SCOND (efficient atomic ops)" + default y + depends on ARC_CPU_770 && !ARC_CANT_LLSC + +config ARC_HAS_SWAPE + bool "Insn: SWAPE (endian-swap)" + default y + depends on ARC_CPU_REL_4_10 + +config ARC_HAS_RTSC + bool "Insn: RTSC (64-bit r/o cycle counter)" + default y + depends on ARC_CPU_REL_4_10 + depends on !SMP + +endmenu # "ARC CPU Configuration" + +config LINUX_LINK_BASE + hex "Linux Link Address" + default "0x80000000" + help + ARC700 divides the 32 bit phy address space into two equal halves + -Lower 2G (0 - 0x7FFF_FFFF ) is user virtual, translated by MMU + -Upper 2G (0x8000_0000 onwards) is untranslated, for kernel + Typically Linux kernel is linked at the start of untransalted addr, + hence the default value of 0x8zs. + However some customers have peripherals mapped at this addr, so + Linux needs to be scooted a bit. + If you don't know what the above means, leave this setting alone. + +config ARC_CURR_IN_REG + bool "Dedicate Register r25 for current_task pointer" + default y + help + This reserved Register R25 to point to Current Task in + kernel mode. This saves memory access for each such access + + +config ARC_EMUL_UNALIGNED + bool "Emulate unaligned memory access (userspace only)" + select SYSCTL_ARCH_UNALIGN_NO_WARN + select SYSCTL_ARCH_UNALIGN_ALLOW + help + This enables misaligned 16 & 32 bit memory access from user space. + Use ONLY-IF-ABS-NECESSARY as it will be very slow and also can hide + potential bugs in code + +config HZ + int "Timer Frequency" + default 100 + +config ARC_METAWARE_HLINK + bool "Support for Metaware debugger assisted Host access" + default n + help + This options allows a Linux userland apps to directly access + host file system (open/creat/read/write etc) with help from + Metaware Debugger. This can come in handy for Linux-host communication + when there is no real usable peripheral such as EMAC. + +menuconfig ARC_DBG + bool "ARC debugging" + default y + +config ARC_DW2_UNWIND + bool "Enable DWARF specific kernel stack unwind" + depends on ARC_DBG + default y + select KALLSYMS + help + Compiles the kernel with DWARF unwind information and can be used + to get stack backtraces. + + If you say Y here the resulting kernel image will be slightly larger + but not slower, and it will give very useful debugging information. + If you don't debug the kernel, you can say N, but we may not be able + to solve problems without frame unwind information + +config ARC_DBG_TLB_PARANOIA + bool "Paranoia Checks in Low Level TLB Handlers" + depends on ARC_DBG + default n + +config ARC_DBG_TLB_MISS_COUNT + bool "Profile TLB Misses" + default n + select DEBUG_FS + depends on ARC_DBG + help + Counts number of I and D TLB Misses and exports them via Debugfs + The counters can be cleared via Debugfs as well + +config ARC_BUILTIN_DTB_NAME + string "Built in DTB" + help + Set the name of the DTB to embed in the vmlinux binary + Leaving it blank selects the minimal "skeleton" dtb + +source "kernel/Kconfig.preempt" + +menu "Executable file formats" +source "fs/Kconfig.binfmt" +endmenu + +endmenu # "ARC Architecture Configuration" + +source "mm/Kconfig" +source "net/Kconfig" +source "drivers/Kconfig" +source "fs/Kconfig" +source "arch/arc/Kconfig.debug" +source "security/Kconfig" +source "crypto/Kconfig" +source "lib/Kconfig" +source "kernel/power/Kconfig" |