diff options
Diffstat (limited to 'kernel/arch/alpha/oprofile')
| -rw-r--r-- | kernel/arch/alpha/oprofile/Makefile | 19 | ||||
| -rw-r--r-- | kernel/arch/alpha/oprofile/common.c | 189 | ||||
| -rw-r--r-- | kernel/arch/alpha/oprofile/op_impl.h | 55 | ||||
| -rw-r--r-- | kernel/arch/alpha/oprofile/op_model_ev4.c | 114 | ||||
| -rw-r--r-- | kernel/arch/alpha/oprofile/op_model_ev5.c | 209 | ||||
| -rw-r--r-- | kernel/arch/alpha/oprofile/op_model_ev6.c | 101 | ||||
| -rw-r--r-- | kernel/arch/alpha/oprofile/op_model_ev67.c | 261 |
7 files changed, 948 insertions, 0 deletions
diff --git a/kernel/arch/alpha/oprofile/Makefile b/kernel/arch/alpha/oprofile/Makefile new file mode 100644 index 000000000..3473de751 --- /dev/null +++ b/kernel/arch/alpha/oprofile/Makefile @@ -0,0 +1,19 @@ +ccflags-y := -Werror -Wno-sign-compare + +obj-$(CONFIG_OPROFILE) += oprofile.o + +DRIVER_OBJS = $(addprefix ../../../drivers/oprofile/, \ + oprof.o cpu_buffer.o buffer_sync.o \ + event_buffer.o oprofile_files.o \ + oprofilefs.o oprofile_stats.o \ + timer_int.o ) + +oprofile-y := $(DRIVER_OBJS) common.o +oprofile-$(CONFIG_ALPHA_GENERIC) += op_model_ev4.o \ + op_model_ev5.o \ + op_model_ev6.o \ + op_model_ev67.o +oprofile-$(CONFIG_ALPHA_EV4) += op_model_ev4.o +oprofile-$(CONFIG_ALPHA_EV5) += op_model_ev5.o +oprofile-$(CONFIG_ALPHA_EV6) += op_model_ev6.o \ + op_model_ev67.o diff --git a/kernel/arch/alpha/oprofile/common.c b/kernel/arch/alpha/oprofile/common.c new file mode 100644 index 000000000..310a4ce1d --- /dev/null +++ b/kernel/arch/alpha/oprofile/common.c @@ -0,0 +1,189 @@ +/** + * @file arch/alpha/oprofile/common.c + * + * @remark Copyright 2002 OProfile authors + * @remark Read the file COPYING + * + * @author Richard Henderson <rth@twiddle.net> + */ + +#include <linux/oprofile.h> +#include <linux/init.h> +#include <linux/smp.h> +#include <linux/errno.h> +#include <asm/ptrace.h> +#include <asm/special_insns.h> + +#include "op_impl.h" + +extern struct op_axp_model op_model_ev4 __attribute__((weak)); +extern struct op_axp_model op_model_ev5 __attribute__((weak)); +extern struct op_axp_model op_model_pca56 __attribute__((weak)); +extern struct op_axp_model op_model_ev6 __attribute__((weak)); +extern struct op_axp_model op_model_ev67 __attribute__((weak)); + +static struct op_axp_model *model; + +extern void (*perf_irq)(unsigned long, struct pt_regs *); +static void (*save_perf_irq)(unsigned long, struct pt_regs *); + +static struct op_counter_config ctr[20]; +static struct op_system_config sys; +static struct op_register_config reg; + +/* Called from do_entInt to handle the performance monitor interrupt. */ + +static void +op_handle_interrupt(unsigned long which, struct pt_regs *regs) +{ + model->handle_interrupt(which, regs, ctr); + + /* If the user has selected an interrupt frequency that is + not exactly the width of the counter, write a new value + into the counter such that it'll overflow after N more + events. */ + if ((reg.need_reset >> which) & 1) + model->reset_ctr(®, which); +} + +static int +op_axp_setup(void) +{ + unsigned long i, e; + + /* Install our interrupt handler into the existing hook. */ + save_perf_irq = perf_irq; + perf_irq = op_handle_interrupt; + + /* Compute the mask of enabled counters. */ + for (i = e = 0; i < model->num_counters; ++i) + if (ctr[i].enabled) + e |= 1 << i; + reg.enable = e; + + /* Pre-compute the values to stuff in the hardware registers. */ + model->reg_setup(®, ctr, &sys); + + /* Configure the registers on all cpus. */ + (void)smp_call_function(model->cpu_setup, ®, 1); + model->cpu_setup(®); + return 0; +} + +static void +op_axp_shutdown(void) +{ + /* Remove our interrupt handler. We may be removing this module. */ + perf_irq = save_perf_irq; +} + +static void +op_axp_cpu_start(void *dummy) +{ + wrperfmon(1, reg.enable); +} + +static int +op_axp_start(void) +{ + (void)smp_call_function(op_axp_cpu_start, NULL, 1); + op_axp_cpu_start(NULL); + return 0; +} + +static inline void +op_axp_cpu_stop(void *dummy) +{ + /* Disable performance monitoring for all counters. */ + wrperfmon(0, -1); +} + +static void +op_axp_stop(void) +{ + (void)smp_call_function(op_axp_cpu_stop, NULL, 1); + op_axp_cpu_stop(NULL); +} + +static int +op_axp_create_files(struct dentry *root) +{ + int i; + + for (i = 0; i < model->num_counters; ++i) { + struct dentry *dir; + char buf[4]; + + snprintf(buf, sizeof buf, "%d", i); + dir = oprofilefs_mkdir(root, buf); + + oprofilefs_create_ulong(dir, "enabled", &ctr[i].enabled); + oprofilefs_create_ulong(dir, "event", &ctr[i].event); + oprofilefs_create_ulong(dir, "count", &ctr[i].count); + /* Dummies. */ + oprofilefs_create_ulong(dir, "kernel", &ctr[i].kernel); + oprofilefs_create_ulong(dir, "user", &ctr[i].user); + oprofilefs_create_ulong(dir, "unit_mask", &ctr[i].unit_mask); + } + + if (model->can_set_proc_mode) { + oprofilefs_create_ulong(root, "enable_pal", + &sys.enable_pal); + oprofilefs_create_ulong(root, "enable_kernel", + &sys.enable_kernel); + oprofilefs_create_ulong(root, "enable_user", + &sys.enable_user); + } + + return 0; +} + +int __init +oprofile_arch_init(struct oprofile_operations *ops) +{ + struct op_axp_model *lmodel = NULL; + + switch (implver()) { + case IMPLVER_EV4: + lmodel = &op_model_ev4; + break; + case IMPLVER_EV5: + /* 21164PC has a slightly different set of events. + Recognize the chip by the presence of the MAX insns. */ + if (!amask(AMASK_MAX)) + lmodel = &op_model_pca56; + else + lmodel = &op_model_ev5; + break; + case IMPLVER_EV6: + /* 21264A supports ProfileMe. + Recognize the chip by the presence of the CIX insns. */ + if (!amask(AMASK_CIX)) + lmodel = &op_model_ev67; + else + lmodel = &op_model_ev6; + break; + } + + if (!lmodel) + return -ENODEV; + model = lmodel; + + ops->create_files = op_axp_create_files; + ops->setup = op_axp_setup; + ops->shutdown = op_axp_shutdown; + ops->start = op_axp_start; + ops->stop = op_axp_stop; + ops->cpu_type = lmodel->cpu_type; + + printk(KERN_INFO "oprofile: using %s performance monitoring.\n", + lmodel->cpu_type); + + return 0; +} + + +void +oprofile_arch_exit(void) +{ +} diff --git a/kernel/arch/alpha/oprofile/op_impl.h b/kernel/arch/alpha/oprofile/op_impl.h new file mode 100644 index 000000000..b2b87ae9a --- /dev/null +++ b/kernel/arch/alpha/oprofile/op_impl.h @@ -0,0 +1,55 @@ +/** + * @file arch/alpha/oprofile/op_impl.h + * + * @remark Copyright 2002 OProfile authors + * @remark Read the file COPYING + * + * @author Richard Henderson <rth@twiddle.net> + */ + +#ifndef OP_IMPL_H +#define OP_IMPL_H 1 + +/* Per-counter configuration as set via oprofilefs. */ +struct op_counter_config { + unsigned long enabled; + unsigned long event; + unsigned long count; + /* Dummies because I am too lazy to hack the userspace tools. */ + unsigned long kernel; + unsigned long user; + unsigned long unit_mask; +}; + +/* System-wide configuration as set via oprofilefs. */ +struct op_system_config { + unsigned long enable_pal; + unsigned long enable_kernel; + unsigned long enable_user; +}; + +/* Cached values for the various performance monitoring registers. */ +struct op_register_config { + unsigned long enable; + unsigned long mux_select; + unsigned long proc_mode; + unsigned long freq; + unsigned long reset_values; + unsigned long need_reset; +}; + +/* Per-architecture configuration and hooks. */ +struct op_axp_model { + void (*reg_setup) (struct op_register_config *, + struct op_counter_config *, + struct op_system_config *); + void (*cpu_setup) (void *); + void (*reset_ctr) (struct op_register_config *, unsigned long); + void (*handle_interrupt) (unsigned long, struct pt_regs *, + struct op_counter_config *); + char *cpu_type; + unsigned char num_counters; + unsigned char can_set_proc_mode; +}; + +#endif diff --git a/kernel/arch/alpha/oprofile/op_model_ev4.c b/kernel/arch/alpha/oprofile/op_model_ev4.c new file mode 100644 index 000000000..086a0d544 --- /dev/null +++ b/kernel/arch/alpha/oprofile/op_model_ev4.c @@ -0,0 +1,114 @@ +/** + * @file arch/alpha/oprofile/op_model_ev4.c + * + * @remark Copyright 2002 OProfile authors + * @remark Read the file COPYING + * + * @author Richard Henderson <rth@twiddle.net> + */ + +#include <linux/oprofile.h> +#include <linux/smp.h> +#include <asm/ptrace.h> + +#include "op_impl.h" + + +/* Compute all of the registers in preparation for enabling profiling. */ + +static void +ev4_reg_setup(struct op_register_config *reg, + struct op_counter_config *ctr, + struct op_system_config *sys) +{ + unsigned long ctl = 0, count, hilo; + + /* Select desired events. We've mapped the event numbers + such that they fit directly into the event selection fields. + + Note that there is no "off" setting. In both cases we select + the EXTERNAL event source, hoping that it'll be the lowest + frequency, and set the frequency counter to LOW. The interrupts + for these "disabled" counter overflows are ignored by the + interrupt handler. + + This is most irritating, because the hardware *can* enable and + disable the interrupts for these counters independently, but the + wrperfmon interface doesn't allow it. */ + + ctl |= (ctr[0].enabled ? ctr[0].event << 8 : 14 << 8); + ctl |= (ctr[1].enabled ? (ctr[1].event - 16) << 32 : 7ul << 32); + + /* EV4 can not read or write its counter registers. The only + thing one can do at all is see if you overflow and get an + interrupt. We can set the width of the counters, to some + extent. Take the interrupt count selected by the user, + map it onto one of the possible values, and write it back. */ + + count = ctr[0].count; + if (count <= 4096) + count = 4096, hilo = 1; + else + count = 65536, hilo = 0; + ctr[0].count = count; + ctl |= (ctr[0].enabled && hilo) << 3; + + count = ctr[1].count; + if (count <= 256) + count = 256, hilo = 1; + else + count = 4096, hilo = 0; + ctr[1].count = count; + ctl |= (ctr[1].enabled && hilo); + + reg->mux_select = ctl; + + /* Select performance monitoring options. */ + /* ??? Need to come up with some mechanism to trace only + selected processes. EV4 does not have a mechanism to + select kernel or user mode only. For now, enable always. */ + reg->proc_mode = 0; + + /* Frequency is folded into mux_select for EV4. */ + reg->freq = 0; + + /* See above regarding no writes. */ + reg->reset_values = 0; + reg->need_reset = 0; + +} + +/* Program all of the registers in preparation for enabling profiling. */ + +static void +ev4_cpu_setup(void *x) +{ + struct op_register_config *reg = x; + + wrperfmon(2, reg->mux_select); + wrperfmon(3, reg->proc_mode); +} + +static void +ev4_handle_interrupt(unsigned long which, struct pt_regs *regs, + struct op_counter_config *ctr) +{ + /* EV4 can't properly disable counters individually. + Discard "disabled" events now. */ + if (!ctr[which].enabled) + return; + + /* Record the sample. */ + oprofile_add_sample(regs, which); +} + + +struct op_axp_model op_model_ev4 = { + .reg_setup = ev4_reg_setup, + .cpu_setup = ev4_cpu_setup, + .reset_ctr = NULL, + .handle_interrupt = ev4_handle_interrupt, + .cpu_type = "alpha/ev4", + .num_counters = 2, + .can_set_proc_mode = 0, +}; diff --git a/kernel/arch/alpha/oprofile/op_model_ev5.c b/kernel/arch/alpha/oprofile/op_model_ev5.c new file mode 100644 index 000000000..c300f5ef3 --- /dev/null +++ b/kernel/arch/alpha/oprofile/op_model_ev5.c @@ -0,0 +1,209 @@ +/** + * @file arch/alpha/oprofile/op_model_ev5.c + * + * @remark Copyright 2002 OProfile authors + * @remark Read the file COPYING + * + * @author Richard Henderson <rth@twiddle.net> + */ + +#include <linux/oprofile.h> +#include <linux/smp.h> +#include <asm/ptrace.h> + +#include "op_impl.h" + + +/* Compute all of the registers in preparation for enabling profiling. + + The 21164 (EV5) and 21164PC (PCA65) vary in the bit placement and + meaning of the "CBOX" events. Given that we don't care about meaning + at this point, arrange for the difference in bit placement to be + handled by common code. */ + +static void +common_reg_setup(struct op_register_config *reg, + struct op_counter_config *ctr, + struct op_system_config *sys, + int cbox1_ofs, int cbox2_ofs) +{ + int i, ctl, reset, need_reset; + + /* Select desired events. The event numbers are selected such + that they map directly into the event selection fields: + + PCSEL0: 0, 1 + PCSEL1: 24-39 + CBOX1: 40-47 + PCSEL2: 48-63 + CBOX2: 64-71 + + There are two special cases, in that CYCLES can be measured + on PCSEL[02], and SCACHE_WRITE can be measured on CBOX[12]. + These event numbers are canonicalizes to their first appearance. */ + + ctl = 0; + for (i = 0; i < 3; ++i) { + unsigned long event = ctr[i].event; + if (!ctr[i].enabled) + continue; + + /* Remap the duplicate events, as described above. */ + if (i == 2) { + if (event == 0) + event = 12+48; + else if (event == 2+41) + event = 4+65; + } + + /* Convert the event numbers onto mux_select bit mask. */ + if (event < 2) + ctl |= event << 31; + else if (event < 24) + /* error */; + else if (event < 40) + ctl |= (event - 24) << 4; + else if (event < 48) + ctl |= (event - 40) << cbox1_ofs | 15 << 4; + else if (event < 64) + ctl |= event - 48; + else if (event < 72) + ctl |= (event - 64) << cbox2_ofs | 15; + } + reg->mux_select = ctl; + + /* Select processor mode. */ + /* ??? Need to come up with some mechanism to trace only selected + processes. For now select from pal, kernel and user mode. */ + ctl = 0; + ctl |= !sys->enable_pal << 9; + ctl |= !sys->enable_kernel << 8; + ctl |= !sys->enable_user << 30; + reg->proc_mode = ctl; + + /* Select interrupt frequencies. Take the interrupt count selected + by the user, and map it onto one of the possible counter widths. + If the user value is in between, compute a value to which the + counter is reset at each interrupt. */ + + ctl = reset = need_reset = 0; + for (i = 0; i < 3; ++i) { + unsigned long max, hilo, count = ctr[i].count; + if (!ctr[i].enabled) + continue; + + if (count <= 256) + count = 256, hilo = 3, max = 256; + else { + max = (i == 2 ? 16384 : 65536); + hilo = 2; + if (count > max) + count = max; + } + ctr[i].count = count; + + ctl |= hilo << (8 - i*2); + reset |= (max - count) << (48 - 16*i); + if (count != max) + need_reset |= 1 << i; + } + reg->freq = ctl; + reg->reset_values = reset; + reg->need_reset = need_reset; +} + +static void +ev5_reg_setup(struct op_register_config *reg, + struct op_counter_config *ctr, + struct op_system_config *sys) +{ + common_reg_setup(reg, ctr, sys, 19, 22); +} + +static void +pca56_reg_setup(struct op_register_config *reg, + struct op_counter_config *ctr, + struct op_system_config *sys) +{ + common_reg_setup(reg, ctr, sys, 8, 11); +} + +/* Program all of the registers in preparation for enabling profiling. */ + +static void +ev5_cpu_setup (void *x) +{ + struct op_register_config *reg = x; + + wrperfmon(2, reg->mux_select); + wrperfmon(3, reg->proc_mode); + wrperfmon(4, reg->freq); + wrperfmon(6, reg->reset_values); +} + +/* CTR is a counter for which the user has requested an interrupt count + in between one of the widths selectable in hardware. Reset the count + for CTR to the value stored in REG->RESET_VALUES. + + For EV5, this means disabling profiling, reading the current values, + masking in the value for the desired register, writing, then turning + profiling back on. + + This can be streamlined if profiling is only enabled for user mode. + In that case we know that the counters are not currently incrementing + (due to being in kernel mode). */ + +static void +ev5_reset_ctr(struct op_register_config *reg, unsigned long ctr) +{ + unsigned long values, mask, not_pk, reset_values; + + mask = (ctr == 0 ? 0xfffful << 48 + : ctr == 1 ? 0xfffful << 32 + : 0x3fff << 16); + + not_pk = 1 << 9 | 1 << 8; + + reset_values = reg->reset_values; + + if ((reg->proc_mode & not_pk) == not_pk) { + values = wrperfmon(5, 0); + values = (reset_values & mask) | (values & ~mask & -2); + wrperfmon(6, values); + } else { + wrperfmon(0, -1); + values = wrperfmon(5, 0); + values = (reset_values & mask) | (values & ~mask & -2); + wrperfmon(6, values); + wrperfmon(1, reg->enable); + } +} + +static void +ev5_handle_interrupt(unsigned long which, struct pt_regs *regs, + struct op_counter_config *ctr) +{ + /* Record the sample. */ + oprofile_add_sample(regs, which); +} + + +struct op_axp_model op_model_ev5 = { + .reg_setup = ev5_reg_setup, + .cpu_setup = ev5_cpu_setup, + .reset_ctr = ev5_reset_ctr, + .handle_interrupt = ev5_handle_interrupt, + .cpu_type = "alpha/ev5", + .num_counters = 3, + .can_set_proc_mode = 1, +}; + +struct op_axp_model op_model_pca56 = { + .reg_setup = pca56_reg_setup, + .cpu_setup = ev5_cpu_setup, + .reset_ctr = ev5_reset_ctr, + .handle_interrupt = ev5_handle_interrupt, + .cpu_type = "alpha/pca56", + .num_counters = 3, + .can_set_proc_mode = 1, +}; diff --git a/kernel/arch/alpha/oprofile/op_model_ev6.c b/kernel/arch/alpha/oprofile/op_model_ev6.c new file mode 100644 index 000000000..02edf5971 --- /dev/null +++ b/kernel/arch/alpha/oprofile/op_model_ev6.c @@ -0,0 +1,101 @@ +/** + * @file arch/alpha/oprofile/op_model_ev6.c + * + * @remark Copyright 2002 OProfile authors + * @remark Read the file COPYING + * + * @author Richard Henderson <rth@twiddle.net> + */ + +#include <linux/oprofile.h> +#include <linux/smp.h> +#include <asm/ptrace.h> + +#include "op_impl.h" + + +/* Compute all of the registers in preparation for enabling profiling. */ + +static void +ev6_reg_setup(struct op_register_config *reg, + struct op_counter_config *ctr, + struct op_system_config *sys) +{ + unsigned long ctl, reset, need_reset, i; + + /* Select desired events. We've mapped the event numbers + such that they fit directly into the event selection fields. */ + ctl = 0; + if (ctr[0].enabled && ctr[0].event) + ctl |= (ctr[0].event & 1) << 4; + if (ctr[1].enabled) + ctl |= (ctr[1].event - 2) & 15; + reg->mux_select = ctl; + + /* Select logging options. */ + /* ??? Need to come up with some mechanism to trace only + selected processes. EV6 does not have a mechanism to + select kernel or user mode only. For now, enable always. */ + reg->proc_mode = 0; + + /* EV6 cannot change the width of the counters as with the + other implementations. But fortunately, we can write to + the counters and set the value such that it will overflow + at the right time. */ + reset = need_reset = 0; + for (i = 0; i < 2; ++i) { + unsigned long count = ctr[i].count; + if (!ctr[i].enabled) + continue; + + if (count > 0x100000) + count = 0x100000; + ctr[i].count = count; + reset |= (0x100000 - count) << (i ? 6 : 28); + if (count != 0x100000) + need_reset |= 1 << i; + } + reg->reset_values = reset; + reg->need_reset = need_reset; +} + +/* Program all of the registers in preparation for enabling profiling. */ + +static void +ev6_cpu_setup (void *x) +{ + struct op_register_config *reg = x; + + wrperfmon(2, reg->mux_select); + wrperfmon(3, reg->proc_mode); + wrperfmon(6, reg->reset_values | 3); +} + +/* CTR is a counter for which the user has requested an interrupt count + in between one of the widths selectable in hardware. Reset the count + for CTR to the value stored in REG->RESET_VALUES. */ + +static void +ev6_reset_ctr(struct op_register_config *reg, unsigned long ctr) +{ + wrperfmon(6, reg->reset_values | (1 << ctr)); +} + +static void +ev6_handle_interrupt(unsigned long which, struct pt_regs *regs, + struct op_counter_config *ctr) +{ + /* Record the sample. */ + oprofile_add_sample(regs, which); +} + + +struct op_axp_model op_model_ev6 = { + .reg_setup = ev6_reg_setup, + .cpu_setup = ev6_cpu_setup, + .reset_ctr = ev6_reset_ctr, + .handle_interrupt = ev6_handle_interrupt, + .cpu_type = "alpha/ev6", + .num_counters = 2, + .can_set_proc_mode = 0, +}; diff --git a/kernel/arch/alpha/oprofile/op_model_ev67.c b/kernel/arch/alpha/oprofile/op_model_ev67.c new file mode 100644 index 000000000..adb1744d2 --- /dev/null +++ b/kernel/arch/alpha/oprofile/op_model_ev67.c @@ -0,0 +1,261 @@ +/** + * @file arch/alpha/oprofile/op_model_ev67.c + * + * @remark Copyright 2002 OProfile authors + * @remark Read the file COPYING + * + * @author Richard Henderson <rth@twiddle.net> + * @author Falk Hueffner <falk@debian.org> + */ + +#include <linux/oprofile.h> +#include <linux/smp.h> +#include <asm/ptrace.h> + +#include "op_impl.h" + + +/* Compute all of the registers in preparation for enabling profiling. */ + +static void +ev67_reg_setup(struct op_register_config *reg, + struct op_counter_config *ctr, + struct op_system_config *sys) +{ + unsigned long ctl, reset, need_reset, i; + + /* Select desired events. */ + ctl = 1UL << 4; /* Enable ProfileMe mode. */ + + /* The event numbers are chosen so we can use them directly if + PCTR1 is enabled. */ + if (ctr[1].enabled) { + ctl |= (ctr[1].event & 3) << 2; + } else { + if (ctr[0].event == 0) /* cycles */ + ctl |= 1UL << 2; + } + reg->mux_select = ctl; + + /* Select logging options. */ + /* ??? Need to come up with some mechanism to trace only + selected processes. EV67 does not have a mechanism to + select kernel or user mode only. For now, enable always. */ + reg->proc_mode = 0; + + /* EV67 cannot change the width of the counters as with the + other implementations. But fortunately, we can write to + the counters and set the value such that it will overflow + at the right time. */ + reset = need_reset = 0; + for (i = 0; i < 2; ++i) { + unsigned long count = ctr[i].count; + if (!ctr[i].enabled) + continue; + + if (count > 0x100000) + count = 0x100000; + ctr[i].count = count; + reset |= (0x100000 - count) << (i ? 6 : 28); + if (count != 0x100000) + need_reset |= 1 << i; + } + reg->reset_values = reset; + reg->need_reset = need_reset; +} + +/* Program all of the registers in preparation for enabling profiling. */ + +static void +ev67_cpu_setup (void *x) +{ + struct op_register_config *reg = x; + + wrperfmon(2, reg->mux_select); + wrperfmon(3, reg->proc_mode); + wrperfmon(6, reg->reset_values | 3); +} + +/* CTR is a counter for which the user has requested an interrupt count + in between one of the widths selectable in hardware. Reset the count + for CTR to the value stored in REG->RESET_VALUES. */ + +static void +ev67_reset_ctr(struct op_register_config *reg, unsigned long ctr) +{ + wrperfmon(6, reg->reset_values | (1 << ctr)); +} + +/* ProfileMe conditions which will show up as counters. We can also + detect the following, but it seems unlikely that anybody is + interested in counting them: + * Reset + * MT_FPCR (write to floating point control register) + * Arithmetic trap + * Dstream Fault + * Machine Check (ECC fault, etc.) + * OPCDEC (illegal opcode) + * Floating point disabled + * Differentiate between DTB single/double misses and 3 or 4 level + page tables + * Istream access violation + * Interrupt + * Icache Parity Error. + * Instruction killed (nop, trapb) + + Unfortunately, there seems to be no way to detect Dcache and Bcache + misses; the latter could be approximated by making the counter + count Bcache misses, but that is not precise. + + We model this as 20 counters: + * PCTR0 + * PCTR1 + * 9 ProfileMe events, induced by PCTR0 + * 9 ProfileMe events, induced by PCTR1 +*/ + +enum profileme_counters { + PM_STALLED, /* Stalled for at least one cycle + between the fetch and map stages */ + PM_TAKEN, /* Conditional branch taken */ + PM_MISPREDICT, /* Branch caused mispredict trap */ + PM_ITB_MISS, /* ITB miss */ + PM_DTB_MISS, /* DTB miss */ + PM_REPLAY, /* Replay trap */ + PM_LOAD_STORE, /* Load-store order trap */ + PM_ICACHE_MISS, /* Icache miss */ + PM_UNALIGNED, /* Unaligned Load/Store */ + PM_NUM_COUNTERS +}; + +static inline void +op_add_pm(unsigned long pc, int kern, unsigned long counter, + struct op_counter_config *ctr, unsigned long event) +{ + unsigned long fake_counter = 2 + event; + if (counter == 1) + fake_counter += PM_NUM_COUNTERS; + if (ctr[fake_counter].enabled) + oprofile_add_pc(pc, kern, fake_counter); +} + +static void +ev67_handle_interrupt(unsigned long which, struct pt_regs *regs, + struct op_counter_config *ctr) +{ + unsigned long pmpc, pctr_ctl; + int kern = !user_mode(regs); + int mispredict = 0; + union { + unsigned long v; + struct { + unsigned reserved: 30; /* 0-29 */ + unsigned overcount: 3; /* 30-32 */ + unsigned icache_miss: 1; /* 33 */ + unsigned trap_type: 4; /* 34-37 */ + unsigned load_store: 1; /* 38 */ + unsigned trap: 1; /* 39 */ + unsigned mispredict: 1; /* 40 */ + } fields; + } i_stat; + + enum trap_types { + TRAP_REPLAY, + TRAP_INVALID0, + TRAP_DTB_DOUBLE_MISS_3, + TRAP_DTB_DOUBLE_MISS_4, + TRAP_FP_DISABLED, + TRAP_UNALIGNED, + TRAP_DTB_SINGLE_MISS, + TRAP_DSTREAM_FAULT, + TRAP_OPCDEC, + TRAP_INVALID1, + TRAP_MACHINE_CHECK, + TRAP_INVALID2, + TRAP_ARITHMETIC, + TRAP_INVALID3, + TRAP_MT_FPCR, + TRAP_RESET + }; + + pmpc = wrperfmon(9, 0); + /* ??? Don't know how to handle physical-mode PALcode address. */ + if (pmpc & 1) + return; + pmpc &= ~2; /* clear reserved bit */ + + i_stat.v = wrperfmon(8, 0); + if (i_stat.fields.trap) { + switch (i_stat.fields.trap_type) { + case TRAP_INVALID1: + case TRAP_INVALID2: + case TRAP_INVALID3: + /* Pipeline redirection occurred. PMPC points + to PALcode. Recognize ITB miss by PALcode + offset address, and get actual PC from + EXC_ADDR. */ + oprofile_add_pc(regs->pc, kern, which); + if ((pmpc & ((1 << 15) - 1)) == 581) + op_add_pm(regs->pc, kern, which, + ctr, PM_ITB_MISS); + /* Most other bit and counter values will be + those for the first instruction in the + fault handler, so we're done. */ + return; + case TRAP_REPLAY: + op_add_pm(pmpc, kern, which, ctr, + (i_stat.fields.load_store + ? PM_LOAD_STORE : PM_REPLAY)); + break; + case TRAP_DTB_DOUBLE_MISS_3: + case TRAP_DTB_DOUBLE_MISS_4: + case TRAP_DTB_SINGLE_MISS: + op_add_pm(pmpc, kern, which, ctr, PM_DTB_MISS); + break; + case TRAP_UNALIGNED: + op_add_pm(pmpc, kern, which, ctr, PM_UNALIGNED); + break; + case TRAP_INVALID0: + case TRAP_FP_DISABLED: + case TRAP_DSTREAM_FAULT: + case TRAP_OPCDEC: + case TRAP_MACHINE_CHECK: + case TRAP_ARITHMETIC: + case TRAP_MT_FPCR: + case TRAP_RESET: + break; + } + + /* ??? JSR/JMP/RET/COR or HW_JSR/HW_JMP/HW_RET/HW_COR + mispredicts do not set this bit but can be + recognized by the presence of one of these + instructions at the PMPC location with bit 39 + set. */ + if (i_stat.fields.mispredict) { + mispredict = 1; + op_add_pm(pmpc, kern, which, ctr, PM_MISPREDICT); + } + } + + oprofile_add_pc(pmpc, kern, which); + + pctr_ctl = wrperfmon(5, 0); + if (pctr_ctl & (1UL << 27)) + op_add_pm(pmpc, kern, which, ctr, PM_STALLED); + + /* Unfortunately, TAK is undefined on mispredicted branches. + ??? It is also undefined for non-cbranch insns, should + check that. */ + if (!mispredict && pctr_ctl & (1UL << 0)) + op_add_pm(pmpc, kern, which, ctr, PM_TAKEN); +} + +struct op_axp_model op_model_ev67 = { + .reg_setup = ev67_reg_setup, + .cpu_setup = ev67_cpu_setup, + .reset_ctr = ev67_reset_ctr, + .handle_interrupt = ev67_handle_interrupt, + .cpu_type = "alpha/ev67", + .num_counters = 20, + .can_set_proc_mode = 0, +}; |