summaryrefslogtreecommitdiffstats
path: root/kernel/Documentation/virtual/kvm
diff options
context:
space:
mode:
Diffstat (limited to 'kernel/Documentation/virtual/kvm')
-rw-r--r--kernel/Documentation/virtual/kvm/00-INDEX26
-rw-r--r--kernel/Documentation/virtual/kvm/api.txt3592
-rw-r--r--kernel/Documentation/virtual/kvm/cpuid.txt60
-rw-r--r--kernel/Documentation/virtual/kvm/devices/README1
-rw-r--r--kernel/Documentation/virtual/kvm/devices/arm-vgic.txt116
-rw-r--r--kernel/Documentation/virtual/kvm/devices/mpic.txt53
-rw-r--r--kernel/Documentation/virtual/kvm/devices/s390_flic.txt94
-rw-r--r--kernel/Documentation/virtual/kvm/devices/vfio.txt22
-rw-r--r--kernel/Documentation/virtual/kvm/devices/vm.txt85
-rw-r--r--kernel/Documentation/virtual/kvm/devices/xics.txt66
-rw-r--r--kernel/Documentation/virtual/kvm/hypercalls.txt83
-rw-r--r--kernel/Documentation/virtual/kvm/locking.txt168
-rw-r--r--kernel/Documentation/virtual/kvm/mmu.txt458
-rw-r--r--kernel/Documentation/virtual/kvm/msr.txt266
-rw-r--r--kernel/Documentation/virtual/kvm/nested-vmx.txt251
-rw-r--r--kernel/Documentation/virtual/kvm/ppc-pv.txt212
-rw-r--r--kernel/Documentation/virtual/kvm/review-checklist.txt38
-rw-r--r--kernel/Documentation/virtual/kvm/s390-diag.txt82
-rw-r--r--kernel/Documentation/virtual/kvm/timekeeping.txt612
19 files changed, 6285 insertions, 0 deletions
diff --git a/kernel/Documentation/virtual/kvm/00-INDEX b/kernel/Documentation/virtual/kvm/00-INDEX
new file mode 100644
index 000000000..fee9f2bf9
--- /dev/null
+++ b/kernel/Documentation/virtual/kvm/00-INDEX
@@ -0,0 +1,26 @@
+00-INDEX
+ - this file.
+api.txt
+ - KVM userspace API.
+cpuid.txt
+ - KVM-specific cpuid leaves (x86).
+devices/
+ - KVM_CAP_DEVICE_CTRL userspace API.
+hypercalls.txt
+ - KVM hypercalls.
+locking.txt
+ - notes on KVM locks.
+mmu.txt
+ - the x86 kvm shadow mmu.
+msr.txt
+ - KVM-specific MSRs (x86).
+nested-vmx.txt
+ - notes on nested virtualization for Intel x86 processors.
+ppc-pv.txt
+ - the paravirtualization interface on PowerPC.
+review-checklist.txt
+ - review checklist for KVM patches.
+s390-diag.txt
+ - Diagnose hypercall description (for IBM S/390)
+timekeeping.txt
+ - timekeeping virtualization for x86-based architectures.
diff --git a/kernel/Documentation/virtual/kvm/api.txt b/kernel/Documentation/virtual/kvm/api.txt
new file mode 100644
index 000000000..9fa2bf8c3
--- /dev/null
+++ b/kernel/Documentation/virtual/kvm/api.txt
@@ -0,0 +1,3592 @@
+The Definitive KVM (Kernel-based Virtual Machine) API Documentation
+===================================================================
+
+1. General description
+----------------------
+
+The kvm API is a set of ioctls that are issued to control various aspects
+of a virtual machine. The ioctls belong to three classes
+
+ - System ioctls: These query and set global attributes which affect the
+ whole kvm subsystem. In addition a system ioctl is used to create
+ virtual machines
+
+ - VM ioctls: These query and set attributes that affect an entire virtual
+ machine, for example memory layout. In addition a VM ioctl is used to
+ create virtual cpus (vcpus).
+
+ Only run VM ioctls from the same process (address space) that was used
+ to create the VM.
+
+ - vcpu ioctls: These query and set attributes that control the operation
+ of a single virtual cpu.
+
+ Only run vcpu ioctls from the same thread that was used to create the
+ vcpu.
+
+
+2. File descriptors
+-------------------
+
+The kvm API is centered around file descriptors. An initial
+open("/dev/kvm") obtains a handle to the kvm subsystem; this handle
+can be used to issue system ioctls. A KVM_CREATE_VM ioctl on this
+handle will create a VM file descriptor which can be used to issue VM
+ioctls. A KVM_CREATE_VCPU ioctl on a VM fd will create a virtual cpu
+and return a file descriptor pointing to it. Finally, ioctls on a vcpu
+fd can be used to control the vcpu, including the important task of
+actually running guest code.
+
+In general file descriptors can be migrated among processes by means
+of fork() and the SCM_RIGHTS facility of unix domain socket. These
+kinds of tricks are explicitly not supported by kvm. While they will
+not cause harm to the host, their actual behavior is not guaranteed by
+the API. The only supported use is one virtual machine per process,
+and one vcpu per thread.
+
+
+3. Extensions
+-------------
+
+As of Linux 2.6.22, the KVM ABI has been stabilized: no backward
+incompatible change are allowed. However, there is an extension
+facility that allows backward-compatible extensions to the API to be
+queried and used.
+
+The extension mechanism is not based on the Linux version number.
+Instead, kvm defines extension identifiers and a facility to query
+whether a particular extension identifier is available. If it is, a
+set of ioctls is available for application use.
+
+
+4. API description
+------------------
+
+This section describes ioctls that can be used to control kvm guests.
+For each ioctl, the following information is provided along with a
+description:
+
+ Capability: which KVM extension provides this ioctl. Can be 'basic',
+ which means that is will be provided by any kernel that supports
+ API version 12 (see section 4.1), a KVM_CAP_xyz constant, which
+ means availability needs to be checked with KVM_CHECK_EXTENSION
+ (see section 4.4), or 'none' which means that while not all kernels
+ support this ioctl, there's no capability bit to check its
+ availability: for kernels that don't support the ioctl,
+ the ioctl returns -ENOTTY.
+
+ Architectures: which instruction set architectures provide this ioctl.
+ x86 includes both i386 and x86_64.
+
+ Type: system, vm, or vcpu.
+
+ Parameters: what parameters are accepted by the ioctl.
+
+ Returns: the return value. General error numbers (EBADF, ENOMEM, EINVAL)
+ are not detailed, but errors with specific meanings are.
+
+
+4.1 KVM_GET_API_VERSION
+
+Capability: basic
+Architectures: all
+Type: system ioctl
+Parameters: none
+Returns: the constant KVM_API_VERSION (=12)
+
+This identifies the API version as the stable kvm API. It is not
+expected that this number will change. However, Linux 2.6.20 and
+2.6.21 report earlier versions; these are not documented and not
+supported. Applications should refuse to run if KVM_GET_API_VERSION
+returns a value other than 12. If this check passes, all ioctls
+described as 'basic' will be available.
+
+
+4.2 KVM_CREATE_VM
+
+Capability: basic
+Architectures: all
+Type: system ioctl
+Parameters: machine type identifier (KVM_VM_*)
+Returns: a VM fd that can be used to control the new virtual machine.
+
+The new VM has no virtual cpus and no memory. An mmap() of a VM fd
+will access the virtual machine's physical address space; offset zero
+corresponds to guest physical address zero. Use of mmap() on a VM fd
+is discouraged if userspace memory allocation (KVM_CAP_USER_MEMORY) is
+available.
+You most certainly want to use 0 as machine type.
+
+In order to create user controlled virtual machines on S390, check
+KVM_CAP_S390_UCONTROL and use the flag KVM_VM_S390_UCONTROL as
+privileged user (CAP_SYS_ADMIN).
+
+
+4.3 KVM_GET_MSR_INDEX_LIST
+
+Capability: basic
+Architectures: x86
+Type: system
+Parameters: struct kvm_msr_list (in/out)
+Returns: 0 on success; -1 on error
+Errors:
+ E2BIG: the msr index list is to be to fit in the array specified by
+ the user.
+
+struct kvm_msr_list {
+ __u32 nmsrs; /* number of msrs in entries */
+ __u32 indices[0];
+};
+
+This ioctl returns the guest msrs that are supported. The list varies
+by kvm version and host processor, but does not change otherwise. The
+user fills in the size of the indices array in nmsrs, and in return
+kvm adjusts nmsrs to reflect the actual number of msrs and fills in
+the indices array with their numbers.
+
+Note: if kvm indicates supports MCE (KVM_CAP_MCE), then the MCE bank MSRs are
+not returned in the MSR list, as different vcpus can have a different number
+of banks, as set via the KVM_X86_SETUP_MCE ioctl.
+
+
+4.4 KVM_CHECK_EXTENSION
+
+Capability: basic, KVM_CAP_CHECK_EXTENSION_VM for vm ioctl
+Architectures: all
+Type: system ioctl, vm ioctl
+Parameters: extension identifier (KVM_CAP_*)
+Returns: 0 if unsupported; 1 (or some other positive integer) if supported
+
+The API allows the application to query about extensions to the core
+kvm API. Userspace passes an extension identifier (an integer) and
+receives an integer that describes the extension availability.
+Generally 0 means no and 1 means yes, but some extensions may report
+additional information in the integer return value.
+
+Based on their initialization different VMs may have different capabilities.
+It is thus encouraged to use the vm ioctl to query for capabilities (available
+with KVM_CAP_CHECK_EXTENSION_VM on the vm fd)
+
+4.5 KVM_GET_VCPU_MMAP_SIZE
+
+Capability: basic
+Architectures: all
+Type: system ioctl
+Parameters: none
+Returns: size of vcpu mmap area, in bytes
+
+The KVM_RUN ioctl (cf.) communicates with userspace via a shared
+memory region. This ioctl returns the size of that region. See the
+KVM_RUN documentation for details.
+
+
+4.6 KVM_SET_MEMORY_REGION
+
+Capability: basic
+Architectures: all
+Type: vm ioctl
+Parameters: struct kvm_memory_region (in)
+Returns: 0 on success, -1 on error
+
+This ioctl is obsolete and has been removed.
+
+
+4.7 KVM_CREATE_VCPU
+
+Capability: basic
+Architectures: all
+Type: vm ioctl
+Parameters: vcpu id (apic id on x86)
+Returns: vcpu fd on success, -1 on error
+
+This API adds a vcpu to a virtual machine. The vcpu id is a small integer
+in the range [0, max_vcpus).
+
+The recommended max_vcpus value can be retrieved using the KVM_CAP_NR_VCPUS of
+the KVM_CHECK_EXTENSION ioctl() at run-time.
+The maximum possible value for max_vcpus can be retrieved using the
+KVM_CAP_MAX_VCPUS of the KVM_CHECK_EXTENSION ioctl() at run-time.
+
+If the KVM_CAP_NR_VCPUS does not exist, you should assume that max_vcpus is 4
+cpus max.
+If the KVM_CAP_MAX_VCPUS does not exist, you should assume that max_vcpus is
+same as the value returned from KVM_CAP_NR_VCPUS.
+
+On powerpc using book3s_hv mode, the vcpus are mapped onto virtual
+threads in one or more virtual CPU cores. (This is because the
+hardware requires all the hardware threads in a CPU core to be in the
+same partition.) The KVM_CAP_PPC_SMT capability indicates the number
+of vcpus per virtual core (vcore). The vcore id is obtained by
+dividing the vcpu id by the number of vcpus per vcore. The vcpus in a
+given vcore will always be in the same physical core as each other
+(though that might be a different physical core from time to time).
+Userspace can control the threading (SMT) mode of the guest by its
+allocation of vcpu ids. For example, if userspace wants
+single-threaded guest vcpus, it should make all vcpu ids be a multiple
+of the number of vcpus per vcore.
+
+For virtual cpus that have been created with S390 user controlled virtual
+machines, the resulting vcpu fd can be memory mapped at page offset
+KVM_S390_SIE_PAGE_OFFSET in order to obtain a memory map of the virtual
+cpu's hardware control block.
+
+
+4.8 KVM_GET_DIRTY_LOG (vm ioctl)
+
+Capability: basic
+Architectures: x86
+Type: vm ioctl
+Parameters: struct kvm_dirty_log (in/out)
+Returns: 0 on success, -1 on error
+
+/* for KVM_GET_DIRTY_LOG */
+struct kvm_dirty_log {
+ __u32 slot;
+ __u32 padding;
+ union {
+ void __user *dirty_bitmap; /* one bit per page */
+ __u64 padding;
+ };
+};
+
+Given a memory slot, return a bitmap containing any pages dirtied
+since the last call to this ioctl. Bit 0 is the first page in the
+memory slot. Ensure the entire structure is cleared to avoid padding
+issues.
+
+
+4.9 KVM_SET_MEMORY_ALIAS
+
+Capability: basic
+Architectures: x86
+Type: vm ioctl
+Parameters: struct kvm_memory_alias (in)
+Returns: 0 (success), -1 (error)
+
+This ioctl is obsolete and has been removed.
+
+
+4.10 KVM_RUN
+
+Capability: basic
+Architectures: all
+Type: vcpu ioctl
+Parameters: none
+Returns: 0 on success, -1 on error
+Errors:
+ EINTR: an unmasked signal is pending
+
+This ioctl is used to run a guest virtual cpu. While there are no
+explicit parameters, there is an implicit parameter block that can be
+obtained by mmap()ing the vcpu fd at offset 0, with the size given by
+KVM_GET_VCPU_MMAP_SIZE. The parameter block is formatted as a 'struct
+kvm_run' (see below).
+
+
+4.11 KVM_GET_REGS
+
+Capability: basic
+Architectures: all except ARM, arm64
+Type: vcpu ioctl
+Parameters: struct kvm_regs (out)
+Returns: 0 on success, -1 on error
+
+Reads the general purpose registers from the vcpu.
+
+/* x86 */
+struct kvm_regs {
+ /* out (KVM_GET_REGS) / in (KVM_SET_REGS) */
+ __u64 rax, rbx, rcx, rdx;
+ __u64 rsi, rdi, rsp, rbp;
+ __u64 r8, r9, r10, r11;
+ __u64 r12, r13, r14, r15;
+ __u64 rip, rflags;
+};
+
+/* mips */
+struct kvm_regs {
+ /* out (KVM_GET_REGS) / in (KVM_SET_REGS) */
+ __u64 gpr[32];
+ __u64 hi;
+ __u64 lo;
+ __u64 pc;
+};
+
+
+4.12 KVM_SET_REGS
+
+Capability: basic
+Architectures: all except ARM, arm64
+Type: vcpu ioctl
+Parameters: struct kvm_regs (in)
+Returns: 0 on success, -1 on error
+
+Writes the general purpose registers into the vcpu.
+
+See KVM_GET_REGS for the data structure.
+
+
+4.13 KVM_GET_SREGS
+
+Capability: basic
+Architectures: x86, ppc
+Type: vcpu ioctl
+Parameters: struct kvm_sregs (out)
+Returns: 0 on success, -1 on error
+
+Reads special registers from the vcpu.
+
+/* x86 */
+struct kvm_sregs {
+ struct kvm_segment cs, ds, es, fs, gs, ss;
+ struct kvm_segment tr, ldt;
+ struct kvm_dtable gdt, idt;
+ __u64 cr0, cr2, cr3, cr4, cr8;
+ __u64 efer;
+ __u64 apic_base;
+ __u64 interrupt_bitmap[(KVM_NR_INTERRUPTS + 63) / 64];
+};
+
+/* ppc -- see arch/powerpc/include/uapi/asm/kvm.h */
+
+interrupt_bitmap is a bitmap of pending external interrupts. At most
+one bit may be set. This interrupt has been acknowledged by the APIC
+but not yet injected into the cpu core.
+
+
+4.14 KVM_SET_SREGS
+
+Capability: basic
+Architectures: x86, ppc
+Type: vcpu ioctl
+Parameters: struct kvm_sregs (in)
+Returns: 0 on success, -1 on error
+
+Writes special registers into the vcpu. See KVM_GET_SREGS for the
+data structures.
+
+
+4.15 KVM_TRANSLATE
+
+Capability: basic
+Architectures: x86
+Type: vcpu ioctl
+Parameters: struct kvm_translation (in/out)
+Returns: 0 on success, -1 on error
+
+Translates a virtual address according to the vcpu's current address
+translation mode.
+
+struct kvm_translation {
+ /* in */
+ __u64 linear_address;
+
+ /* out */
+ __u64 physical_address;
+ __u8 valid;
+ __u8 writeable;
+ __u8 usermode;
+ __u8 pad[5];
+};
+
+
+4.16 KVM_INTERRUPT
+
+Capability: basic
+Architectures: x86, ppc, mips
+Type: vcpu ioctl
+Parameters: struct kvm_interrupt (in)
+Returns: 0 on success, -1 on error
+
+Queues a hardware interrupt vector to be injected. This is only
+useful if in-kernel local APIC or equivalent is not used.
+
+/* for KVM_INTERRUPT */
+struct kvm_interrupt {
+ /* in */
+ __u32 irq;
+};
+
+X86:
+
+Note 'irq' is an interrupt vector, not an interrupt pin or line.
+
+PPC:
+
+Queues an external interrupt to be injected. This ioctl is overleaded
+with 3 different irq values:
+
+a) KVM_INTERRUPT_SET
+
+ This injects an edge type external interrupt into the guest once it's ready
+ to receive interrupts. When injected, the interrupt is done.
+
+b) KVM_INTERRUPT_UNSET
+
+ This unsets any pending interrupt.
+
+ Only available with KVM_CAP_PPC_UNSET_IRQ.
+
+c) KVM_INTERRUPT_SET_LEVEL
+
+ This injects a level type external interrupt into the guest context. The
+ interrupt stays pending until a specific ioctl with KVM_INTERRUPT_UNSET
+ is triggered.
+
+ Only available with KVM_CAP_PPC_IRQ_LEVEL.
+
+Note that any value for 'irq' other than the ones stated above is invalid
+and incurs unexpected behavior.
+
+MIPS:
+
+Queues an external interrupt to be injected into the virtual CPU. A negative
+interrupt number dequeues the interrupt.
+
+
+4.17 KVM_DEBUG_GUEST
+
+Capability: basic
+Architectures: none
+Type: vcpu ioctl
+Parameters: none)
+Returns: -1 on error
+
+Support for this has been removed. Use KVM_SET_GUEST_DEBUG instead.
+
+
+4.18 KVM_GET_MSRS
+
+Capability: basic
+Architectures: x86
+Type: vcpu ioctl
+Parameters: struct kvm_msrs (in/out)
+Returns: 0 on success, -1 on error
+
+Reads model-specific registers from the vcpu. Supported msr indices can
+be obtained using KVM_GET_MSR_INDEX_LIST.
+
+struct kvm_msrs {
+ __u32 nmsrs; /* number of msrs in entries */
+ __u32 pad;
+
+ struct kvm_msr_entry entries[0];
+};
+
+struct kvm_msr_entry {
+ __u32 index;
+ __u32 reserved;
+ __u64 data;
+};
+
+Application code should set the 'nmsrs' member (which indicates the
+size of the entries array) and the 'index' member of each array entry.
+kvm will fill in the 'data' member.
+
+
+4.19 KVM_SET_MSRS
+
+Capability: basic
+Architectures: x86
+Type: vcpu ioctl
+Parameters: struct kvm_msrs (in)
+Returns: 0 on success, -1 on error
+
+Writes model-specific registers to the vcpu. See KVM_GET_MSRS for the
+data structures.
+
+Application code should set the 'nmsrs' member (which indicates the
+size of the entries array), and the 'index' and 'data' members of each
+array entry.
+
+
+4.20 KVM_SET_CPUID
+
+Capability: basic
+Architectures: x86
+Type: vcpu ioctl
+Parameters: struct kvm_cpuid (in)
+Returns: 0 on success, -1 on error
+
+Defines the vcpu responses to the cpuid instruction. Applications
+should use the KVM_SET_CPUID2 ioctl if available.
+
+
+struct kvm_cpuid_entry {
+ __u32 function;
+ __u32 eax;
+ __u32 ebx;
+ __u32 ecx;
+ __u32 edx;
+ __u32 padding;
+};
+
+/* for KVM_SET_CPUID */
+struct kvm_cpuid {
+ __u32 nent;
+ __u32 padding;
+ struct kvm_cpuid_entry entries[0];
+};
+
+
+4.21 KVM_SET_SIGNAL_MASK
+
+Capability: basic
+Architectures: all
+Type: vcpu ioctl
+Parameters: struct kvm_signal_mask (in)
+Returns: 0 on success, -1 on error
+
+Defines which signals are blocked during execution of KVM_RUN. This
+signal mask temporarily overrides the threads signal mask. Any
+unblocked signal received (except SIGKILL and SIGSTOP, which retain
+their traditional behaviour) will cause KVM_RUN to return with -EINTR.
+
+Note the signal will only be delivered if not blocked by the original
+signal mask.
+
+/* for KVM_SET_SIGNAL_MASK */
+struct kvm_signal_mask {
+ __u32 len;
+ __u8 sigset[0];
+};
+
+
+4.22 KVM_GET_FPU
+
+Capability: basic
+Architectures: x86
+Type: vcpu ioctl
+Parameters: struct kvm_fpu (out)
+Returns: 0 on success, -1 on error
+
+Reads the floating point state from the vcpu.
+
+/* for KVM_GET_FPU and KVM_SET_FPU */
+struct kvm_fpu {
+ __u8 fpr[8][16];
+ __u16 fcw;
+ __u16 fsw;
+ __u8 ftwx; /* in fxsave format */
+ __u8 pad1;
+ __u16 last_opcode;
+ __u64 last_ip;
+ __u64 last_dp;
+ __u8 xmm[16][16];
+ __u32 mxcsr;
+ __u32 pad2;
+};
+
+
+4.23 KVM_SET_FPU
+
+Capability: basic
+Architectures: x86
+Type: vcpu ioctl
+Parameters: struct kvm_fpu (in)
+Returns: 0 on success, -1 on error
+
+Writes the floating point state to the vcpu.
+
+/* for KVM_GET_FPU and KVM_SET_FPU */
+struct kvm_fpu {
+ __u8 fpr[8][16];
+ __u16 fcw;
+ __u16 fsw;
+ __u8 ftwx; /* in fxsave format */
+ __u8 pad1;
+ __u16 last_opcode;
+ __u64 last_ip;
+ __u64 last_dp;
+ __u8 xmm[16][16];
+ __u32 mxcsr;
+ __u32 pad2;
+};
+
+
+4.24 KVM_CREATE_IRQCHIP
+
+Capability: KVM_CAP_IRQCHIP, KVM_CAP_S390_IRQCHIP (s390)
+Architectures: x86, ARM, arm64, s390
+Type: vm ioctl
+Parameters: none
+Returns: 0 on success, -1 on error
+
+Creates an interrupt controller model in the kernel.
+On x86, creates a virtual ioapic, a virtual PIC (two PICs, nested), and sets up
+future vcpus to have a local APIC. IRQ routing for GSIs 0-15 is set to both
+PIC and IOAPIC; GSI 16-23 only go to the IOAPIC.
+On ARM/arm64, a GICv2 is created. Any other GIC versions require the usage of
+KVM_CREATE_DEVICE, which also supports creating a GICv2. Using
+KVM_CREATE_DEVICE is preferred over KVM_CREATE_IRQCHIP for GICv2.
+On s390, a dummy irq routing table is created.
+
+Note that on s390 the KVM_CAP_S390_IRQCHIP vm capability needs to be enabled
+before KVM_CREATE_IRQCHIP can be used.
+
+
+4.25 KVM_IRQ_LINE
+
+Capability: KVM_CAP_IRQCHIP
+Architectures: x86, arm, arm64
+Type: vm ioctl
+Parameters: struct kvm_irq_level
+Returns: 0 on success, -1 on error
+
+Sets the level of a GSI input to the interrupt controller model in the kernel.
+On some architectures it is required that an interrupt controller model has
+been previously created with KVM_CREATE_IRQCHIP. Note that edge-triggered
+interrupts require the level to be set to 1 and then back to 0.
+
+On real hardware, interrupt pins can be active-low or active-high. This
+does not matter for the level field of struct kvm_irq_level: 1 always
+means active (asserted), 0 means inactive (deasserted).
+
+x86 allows the operating system to program the interrupt polarity
+(active-low/active-high) for level-triggered interrupts, and KVM used
+to consider the polarity. However, due to bitrot in the handling of
+active-low interrupts, the above convention is now valid on x86 too.
+This is signaled by KVM_CAP_X86_IOAPIC_POLARITY_IGNORED. Userspace
+should not present interrupts to the guest as active-low unless this
+capability is present (or unless it is not using the in-kernel irqchip,
+of course).
+
+
+ARM/arm64 can signal an interrupt either at the CPU level, or at the
+in-kernel irqchip (GIC), and for in-kernel irqchip can tell the GIC to
+use PPIs designated for specific cpus. The irq field is interpreted
+like this:
+
+  bits: | 31 ... 24 | 23 ... 16 | 15 ... 0 |
+ field: | irq_type | vcpu_index | irq_id |
+
+The irq_type field has the following values:
+- irq_type[0]: out-of-kernel GIC: irq_id 0 is IRQ, irq_id 1 is FIQ
+- irq_type[1]: in-kernel GIC: SPI, irq_id between 32 and 1019 (incl.)
+ (the vcpu_index field is ignored)
+- irq_type[2]: in-kernel GIC: PPI, irq_id between 16 and 31 (incl.)
+
+(The irq_id field thus corresponds nicely to the IRQ ID in the ARM GIC specs)
+
+In both cases, level is used to assert/deassert the line.
+
+struct kvm_irq_level {
+ union {
+ __u32 irq; /* GSI */
+ __s32 status; /* not used for KVM_IRQ_LEVEL */
+ };
+ __u32 level; /* 0 or 1 */
+};
+
+
+4.26 KVM_GET_IRQCHIP
+
+Capability: KVM_CAP_IRQCHIP
+Architectures: x86
+Type: vm ioctl
+Parameters: struct kvm_irqchip (in/out)
+Returns: 0 on success, -1 on error
+
+Reads the state of a kernel interrupt controller created with
+KVM_CREATE_IRQCHIP into a buffer provided by the caller.
+
+struct kvm_irqchip {
+ __u32 chip_id; /* 0 = PIC1, 1 = PIC2, 2 = IOAPIC */
+ __u32 pad;
+ union {
+ char dummy[512]; /* reserving space */
+ struct kvm_pic_state pic;
+ struct kvm_ioapic_state ioapic;
+ } chip;
+};
+
+
+4.27 KVM_SET_IRQCHIP
+
+Capability: KVM_CAP_IRQCHIP
+Architectures: x86
+Type: vm ioctl
+Parameters: struct kvm_irqchip (in)
+Returns: 0 on success, -1 on error
+
+Sets the state of a kernel interrupt controller created with
+KVM_CREATE_IRQCHIP from a buffer provided by the caller.
+
+struct kvm_irqchip {
+ __u32 chip_id; /* 0 = PIC1, 1 = PIC2, 2 = IOAPIC */
+ __u32 pad;
+ union {
+ char dummy[512]; /* reserving space */
+ struct kvm_pic_state pic;
+ struct kvm_ioapic_state ioapic;
+ } chip;
+};
+
+
+4.28 KVM_XEN_HVM_CONFIG
+
+Capability: KVM_CAP_XEN_HVM
+Architectures: x86
+Type: vm ioctl
+Parameters: struct kvm_xen_hvm_config (in)
+Returns: 0 on success, -1 on error
+
+Sets the MSR that the Xen HVM guest uses to initialize its hypercall
+page, and provides the starting address and size of the hypercall
+blobs in userspace. When the guest writes the MSR, kvm copies one
+page of a blob (32- or 64-bit, depending on the vcpu mode) to guest
+memory.
+
+struct kvm_xen_hvm_config {
+ __u32 flags;
+ __u32 msr;
+ __u64 blob_addr_32;
+ __u64 blob_addr_64;
+ __u8 blob_size_32;
+ __u8 blob_size_64;
+ __u8 pad2[30];
+};
+
+
+4.29 KVM_GET_CLOCK
+
+Capability: KVM_CAP_ADJUST_CLOCK
+Architectures: x86
+Type: vm ioctl
+Parameters: struct kvm_clock_data (out)
+Returns: 0 on success, -1 on error
+
+Gets the current timestamp of kvmclock as seen by the current guest. In
+conjunction with KVM_SET_CLOCK, it is used to ensure monotonicity on scenarios
+such as migration.
+
+struct kvm_clock_data {
+ __u64 clock; /* kvmclock current value */
+ __u32 flags;
+ __u32 pad[9];
+};
+
+
+4.30 KVM_SET_CLOCK
+
+Capability: KVM_CAP_ADJUST_CLOCK
+Architectures: x86
+Type: vm ioctl
+Parameters: struct kvm_clock_data (in)
+Returns: 0 on success, -1 on error
+
+Sets the current timestamp of kvmclock to the value specified in its parameter.
+In conjunction with KVM_GET_CLOCK, it is used to ensure monotonicity on scenarios
+such as migration.
+
+struct kvm_clock_data {
+ __u64 clock; /* kvmclock current value */
+ __u32 flags;
+ __u32 pad[9];
+};
+
+
+4.31 KVM_GET_VCPU_EVENTS
+
+Capability: KVM_CAP_VCPU_EVENTS
+Extended by: KVM_CAP_INTR_SHADOW
+Architectures: x86
+Type: vm ioctl
+Parameters: struct kvm_vcpu_event (out)
+Returns: 0 on success, -1 on error
+
+Gets currently pending exceptions, interrupts, and NMIs as well as related
+states of the vcpu.
+
+struct kvm_vcpu_events {
+ struct {
+ __u8 injected;
+ __u8 nr;
+ __u8 has_error_code;
+ __u8 pad;
+ __u32 error_code;
+ } exception;
+ struct {
+ __u8 injected;
+ __u8 nr;
+ __u8 soft;
+ __u8 shadow;
+ } interrupt;
+ struct {
+ __u8 injected;
+ __u8 pending;
+ __u8 masked;
+ __u8 pad;
+ } nmi;
+ __u32 sipi_vector;
+ __u32 flags;
+};
+
+KVM_VCPUEVENT_VALID_SHADOW may be set in the flags field to signal that
+interrupt.shadow contains a valid state. Otherwise, this field is undefined.
+
+
+4.32 KVM_SET_VCPU_EVENTS
+
+Capability: KVM_CAP_VCPU_EVENTS
+Extended by: KVM_CAP_INTR_SHADOW
+Architectures: x86
+Type: vm ioctl
+Parameters: struct kvm_vcpu_event (in)
+Returns: 0 on success, -1 on error
+
+Set pending exceptions, interrupts, and NMIs as well as related states of the
+vcpu.
+
+See KVM_GET_VCPU_EVENTS for the data structure.
+
+Fields that may be modified asynchronously by running VCPUs can be excluded
+from the update. These fields are nmi.pending and sipi_vector. Keep the
+corresponding bits in the flags field cleared to suppress overwriting the
+current in-kernel state. The bits are:
+
+KVM_VCPUEVENT_VALID_NMI_PENDING - transfer nmi.pending to the kernel
+KVM_VCPUEVENT_VALID_SIPI_VECTOR - transfer sipi_vector
+
+If KVM_CAP_INTR_SHADOW is available, KVM_VCPUEVENT_VALID_SHADOW can be set in
+the flags field to signal that interrupt.shadow contains a valid state and
+shall be written into the VCPU.
+
+
+4.33 KVM_GET_DEBUGREGS
+
+Capability: KVM_CAP_DEBUGREGS
+Architectures: x86
+Type: vm ioctl
+Parameters: struct kvm_debugregs (out)
+Returns: 0 on success, -1 on error
+
+Reads debug registers from the vcpu.
+
+struct kvm_debugregs {
+ __u64 db[4];
+ __u64 dr6;
+ __u64 dr7;
+ __u64 flags;
+ __u64 reserved[9];
+};
+
+
+4.34 KVM_SET_DEBUGREGS
+
+Capability: KVM_CAP_DEBUGREGS
+Architectures: x86
+Type: vm ioctl
+Parameters: struct kvm_debugregs (in)
+Returns: 0 on success, -1 on error
+
+Writes debug registers into the vcpu.
+
+See KVM_GET_DEBUGREGS for the data structure. The flags field is unused
+yet and must be cleared on entry.
+
+
+4.35 KVM_SET_USER_MEMORY_REGION
+
+Capability: KVM_CAP_USER_MEM
+Architectures: all
+Type: vm ioctl
+Parameters: struct kvm_userspace_memory_region (in)
+Returns: 0 on success, -1 on error
+
+struct kvm_userspace_memory_region {
+ __u32 slot;
+ __u32 flags;
+ __u64 guest_phys_addr;
+ __u64 memory_size; /* bytes */
+ __u64 userspace_addr; /* start of the userspace allocated memory */
+};
+
+/* for kvm_memory_region::flags */
+#define KVM_MEM_LOG_DIRTY_PAGES (1UL << 0)
+#define KVM_MEM_READONLY (1UL << 1)
+
+This ioctl allows the user to create or modify a guest physical memory
+slot. When changing an existing slot, it may be moved in the guest
+physical memory space, or its flags may be modified. It may not be
+resized. Slots may not overlap in guest physical address space.
+
+Memory for the region is taken starting at the address denoted by the
+field userspace_addr, which must point at user addressable memory for
+the entire memory slot size. Any object may back this memory, including
+anonymous memory, ordinary files, and hugetlbfs.
+
+It is recommended that the lower 21 bits of guest_phys_addr and userspace_addr
+be identical. This allows large pages in the guest to be backed by large
+pages in the host.
+
+The flags field supports two flags: KVM_MEM_LOG_DIRTY_PAGES and
+KVM_MEM_READONLY. The former can be set to instruct KVM to keep track of
+writes to memory within the slot. See KVM_GET_DIRTY_LOG ioctl to know how to
+use it. The latter can be set, if KVM_CAP_READONLY_MEM capability allows it,
+to make a new slot read-only. In this case, writes to this memory will be
+posted to userspace as KVM_EXIT_MMIO exits.
+
+When the KVM_CAP_SYNC_MMU capability is available, changes in the backing of
+the memory region are automatically reflected into the guest. For example, an
+mmap() that affects the region will be made visible immediately. Another
+example is madvise(MADV_DROP).
+
+It is recommended to use this API instead of the KVM_SET_MEMORY_REGION ioctl.
+The KVM_SET_MEMORY_REGION does not allow fine grained control over memory
+allocation and is deprecated.
+
+
+4.36 KVM_SET_TSS_ADDR
+
+Capability: KVM_CAP_SET_TSS_ADDR
+Architectures: x86
+Type: vm ioctl
+Parameters: unsigned long tss_address (in)
+Returns: 0 on success, -1 on error
+
+This ioctl defines the physical address of a three-page region in the guest
+physical address space. The region must be within the first 4GB of the
+guest physical address space and must not conflict with any memory slot
+or any mmio address. The guest may malfunction if it accesses this memory
+region.
+
+This ioctl is required on Intel-based hosts. This is needed on Intel hardware
+because of a quirk in the virtualization implementation (see the internals
+documentation when it pops into existence).
+
+
+4.37 KVM_ENABLE_CAP
+
+Capability: KVM_CAP_ENABLE_CAP, KVM_CAP_ENABLE_CAP_VM
+Architectures: ppc, s390
+Type: vcpu ioctl, vm ioctl (with KVM_CAP_ENABLE_CAP_VM)
+Parameters: struct kvm_enable_cap (in)
+Returns: 0 on success; -1 on error
+
++Not all extensions are enabled by default. Using this ioctl the application
+can enable an extension, making it available to the guest.
+
+On systems that do not support this ioctl, it always fails. On systems that
+do support it, it only works for extensions that are supported for enablement.
+
+To check if a capability can be enabled, the KVM_CHECK_EXTENSION ioctl should
+be used.
+
+struct kvm_enable_cap {
+ /* in */
+ __u32 cap;
+
+The capability that is supposed to get enabled.
+
+ __u32 flags;
+
+A bitfield indicating future enhancements. Has to be 0 for now.
+
+ __u64 args[4];
+
+Arguments for enabling a feature. If a feature needs initial values to
+function properly, this is the place to put them.
+
+ __u8 pad[64];
+};
+
+The vcpu ioctl should be used for vcpu-specific capabilities, the vm ioctl
+for vm-wide capabilities.
+
+4.38 KVM_GET_MP_STATE
+
+Capability: KVM_CAP_MP_STATE
+Architectures: x86, s390, arm, arm64
+Type: vcpu ioctl
+Parameters: struct kvm_mp_state (out)
+Returns: 0 on success; -1 on error
+
+struct kvm_mp_state {
+ __u32 mp_state;
+};
+
+Returns the vcpu's current "multiprocessing state" (though also valid on
+uniprocessor guests).
+
+Possible values are:
+
+ - KVM_MP_STATE_RUNNABLE: the vcpu is currently running [x86,arm/arm64]
+ - KVM_MP_STATE_UNINITIALIZED: the vcpu is an application processor (AP)
+ which has not yet received an INIT signal [x86]
+ - KVM_MP_STATE_INIT_RECEIVED: the vcpu has received an INIT signal, and is
+ now ready for a SIPI [x86]
+ - KVM_MP_STATE_HALTED: the vcpu has executed a HLT instruction and
+ is waiting for an interrupt [x86]
+ - KVM_MP_STATE_SIPI_RECEIVED: the vcpu has just received a SIPI (vector
+ accessible via KVM_GET_VCPU_EVENTS) [x86]
+ - KVM_MP_STATE_STOPPED: the vcpu is stopped [s390,arm/arm64]
+ - KVM_MP_STATE_CHECK_STOP: the vcpu is in a special error state [s390]
+ - KVM_MP_STATE_OPERATING: the vcpu is operating (running or halted)
+ [s390]
+ - KVM_MP_STATE_LOAD: the vcpu is in a special load/startup state
+ [s390]
+
+On x86, this ioctl is only useful after KVM_CREATE_IRQCHIP. Without an
+in-kernel irqchip, the multiprocessing state must be maintained by userspace on
+these architectures.
+
+For arm/arm64:
+
+The only states that are valid are KVM_MP_STATE_STOPPED and
+KVM_MP_STATE_RUNNABLE which reflect if the vcpu is paused or not.
+
+4.39 KVM_SET_MP_STATE
+
+Capability: KVM_CAP_MP_STATE
+Architectures: x86, s390, arm, arm64
+Type: vcpu ioctl
+Parameters: struct kvm_mp_state (in)
+Returns: 0 on success; -1 on error
+
+Sets the vcpu's current "multiprocessing state"; see KVM_GET_MP_STATE for
+arguments.
+
+On x86, this ioctl is only useful after KVM_CREATE_IRQCHIP. Without an
+in-kernel irqchip, the multiprocessing state must be maintained by userspace on
+these architectures.
+
+For arm/arm64:
+
+The only states that are valid are KVM_MP_STATE_STOPPED and
+KVM_MP_STATE_RUNNABLE which reflect if the vcpu should be paused or not.
+
+4.40 KVM_SET_IDENTITY_MAP_ADDR
+
+Capability: KVM_CAP_SET_IDENTITY_MAP_ADDR
+Architectures: x86
+Type: vm ioctl
+Parameters: unsigned long identity (in)
+Returns: 0 on success, -1 on error
+
+This ioctl defines the physical address of a one-page region in the guest
+physical address space. The region must be within the first 4GB of the
+guest physical address space and must not conflict with any memory slot
+or any mmio address. The guest may malfunction if it accesses this memory
+region.
+
+This ioctl is required on Intel-based hosts. This is needed on Intel hardware
+because of a quirk in the virtualization implementation (see the internals
+documentation when it pops into existence).
+
+
+4.41 KVM_SET_BOOT_CPU_ID
+
+Capability: KVM_CAP_SET_BOOT_CPU_ID
+Architectures: x86
+Type: vm ioctl
+Parameters: unsigned long vcpu_id
+Returns: 0 on success, -1 on error
+
+Define which vcpu is the Bootstrap Processor (BSP). Values are the same
+as the vcpu id in KVM_CREATE_VCPU. If this ioctl is not called, the default
+is vcpu 0.
+
+
+4.42 KVM_GET_XSAVE
+
+Capability: KVM_CAP_XSAVE
+Architectures: x86
+Type: vcpu ioctl
+Parameters: struct kvm_xsave (out)
+Returns: 0 on success, -1 on error
+
+struct kvm_xsave {
+ __u32 region[1024];
+};
+
+This ioctl would copy current vcpu's xsave struct to the userspace.
+
+
+4.43 KVM_SET_XSAVE
+
+Capability: KVM_CAP_XSAVE
+Architectures: x86
+Type: vcpu ioctl
+Parameters: struct kvm_xsave (in)
+Returns: 0 on success, -1 on error
+
+struct kvm_xsave {
+ __u32 region[1024];
+};
+
+This ioctl would copy userspace's xsave struct to the kernel.
+
+
+4.44 KVM_GET_XCRS
+
+Capability: KVM_CAP_XCRS
+Architectures: x86
+Type: vcpu ioctl
+Parameters: struct kvm_xcrs (out)
+Returns: 0 on success, -1 on error
+
+struct kvm_xcr {
+ __u32 xcr;
+ __u32 reserved;
+ __u64 value;
+};
+
+struct kvm_xcrs {
+ __u32 nr_xcrs;
+ __u32 flags;
+ struct kvm_xcr xcrs[KVM_MAX_XCRS];
+ __u64 padding[16];
+};
+
+This ioctl would copy current vcpu's xcrs to the userspace.
+
+
+4.45 KVM_SET_XCRS
+
+Capability: KVM_CAP_XCRS
+Architectures: x86
+Type: vcpu ioctl
+Parameters: struct kvm_xcrs (in)
+Returns: 0 on success, -1 on error
+
+struct kvm_xcr {
+ __u32 xcr;
+ __u32 reserved;
+ __u64 value;
+};
+
+struct kvm_xcrs {
+ __u32 nr_xcrs;
+ __u32 flags;
+ struct kvm_xcr xcrs[KVM_MAX_XCRS];
+ __u64 padding[16];
+};
+
+This ioctl would set vcpu's xcr to the value userspace specified.
+
+
+4.46 KVM_GET_SUPPORTED_CPUID
+
+Capability: KVM_CAP_EXT_CPUID
+Architectures: x86
+Type: system ioctl
+Parameters: struct kvm_cpuid2 (in/out)
+Returns: 0 on success, -1 on error
+
+struct kvm_cpuid2 {
+ __u32 nent;
+ __u32 padding;
+ struct kvm_cpuid_entry2 entries[0];
+};
+
+#define KVM_CPUID_FLAG_SIGNIFCANT_INDEX BIT(0)
+#define KVM_CPUID_FLAG_STATEFUL_FUNC BIT(1)
+#define KVM_CPUID_FLAG_STATE_READ_NEXT BIT(2)
+
+struct kvm_cpuid_entry2 {
+ __u32 function;
+ __u32 index;
+ __u32 flags;
+ __u32 eax;
+ __u32 ebx;
+ __u32 ecx;
+ __u32 edx;
+ __u32 padding[3];
+};
+
+This ioctl returns x86 cpuid features which are supported by both the hardware
+and kvm. Userspace can use the information returned by this ioctl to
+construct cpuid information (for KVM_SET_CPUID2) that is consistent with
+hardware, kernel, and userspace capabilities, and with user requirements (for
+example, the user may wish to constrain cpuid to emulate older hardware,
+or for feature consistency across a cluster).
+
+Userspace invokes KVM_GET_SUPPORTED_CPUID by passing a kvm_cpuid2 structure
+with the 'nent' field indicating the number of entries in the variable-size
+array 'entries'. If the number of entries is too low to describe the cpu
+capabilities, an error (E2BIG) is returned. If the number is too high,
+the 'nent' field is adjusted and an error (ENOMEM) is returned. If the
+number is just right, the 'nent' field is adjusted to the number of valid
+entries in the 'entries' array, which is then filled.
+
+The entries returned are the host cpuid as returned by the cpuid instruction,
+with unknown or unsupported features masked out. Some features (for example,
+x2apic), may not be present in the host cpu, but are exposed by kvm if it can
+emulate them efficiently. The fields in each entry are defined as follows:
+
+ function: the eax value used to obtain the entry
+ index: the ecx value used to obtain the entry (for entries that are
+ affected by ecx)
+ flags: an OR of zero or more of the following:
+ KVM_CPUID_FLAG_SIGNIFCANT_INDEX:
+ if the index field is valid
+ KVM_CPUID_FLAG_STATEFUL_FUNC:
+ if cpuid for this function returns different values for successive
+ invocations; there will be several entries with the same function,
+ all with this flag set
+ KVM_CPUID_FLAG_STATE_READ_NEXT:
+ for KVM_CPUID_FLAG_STATEFUL_FUNC entries, set if this entry is
+ the first entry to be read by a cpu
+ eax, ebx, ecx, edx: the values returned by the cpuid instruction for
+ this function/index combination
+
+The TSC deadline timer feature (CPUID leaf 1, ecx[24]) is always returned
+as false, since the feature depends on KVM_CREATE_IRQCHIP for local APIC
+support. Instead it is reported via
+
+ ioctl(KVM_CHECK_EXTENSION, KVM_CAP_TSC_DEADLINE_TIMER)
+
+if that returns true and you use KVM_CREATE_IRQCHIP, or if you emulate the
+feature in userspace, then you can enable the feature for KVM_SET_CPUID2.
+
+
+4.47 KVM_PPC_GET_PVINFO
+
+Capability: KVM_CAP_PPC_GET_PVINFO
+Architectures: ppc
+Type: vm ioctl
+Parameters: struct kvm_ppc_pvinfo (out)
+Returns: 0 on success, !0 on error
+
+struct kvm_ppc_pvinfo {
+ __u32 flags;
+ __u32 hcall[4];
+ __u8 pad[108];
+};
+
+This ioctl fetches PV specific information that need to be passed to the guest
+using the device tree or other means from vm context.
+
+The hcall array defines 4 instructions that make up a hypercall.
+
+If any additional field gets added to this structure later on, a bit for that
+additional piece of information will be set in the flags bitmap.
+
+The flags bitmap is defined as:
+
+ /* the host supports the ePAPR idle hcall
+ #define KVM_PPC_PVINFO_FLAGS_EV_IDLE (1<<0)
+
+4.48 KVM_ASSIGN_PCI_DEVICE
+
+Capability: none
+Architectures: x86
+Type: vm ioctl
+Parameters: struct kvm_assigned_pci_dev (in)
+Returns: 0 on success, -1 on error
+
+Assigns a host PCI device to the VM.
+
+struct kvm_assigned_pci_dev {
+ __u32 assigned_dev_id;
+ __u32 busnr;
+ __u32 devfn;
+ __u32 flags;
+ __u32 segnr;
+ union {
+ __u32 reserved[11];
+ };
+};
+
+The PCI device is specified by the triple segnr, busnr, and devfn.
+Identification in succeeding service requests is done via assigned_dev_id. The
+following flags are specified:
+
+/* Depends on KVM_CAP_IOMMU */
+#define KVM_DEV_ASSIGN_ENABLE_IOMMU (1 << 0)
+/* The following two depend on KVM_CAP_PCI_2_3 */
+#define KVM_DEV_ASSIGN_PCI_2_3 (1 << 1)
+#define KVM_DEV_ASSIGN_MASK_INTX (1 << 2)
+
+If KVM_DEV_ASSIGN_PCI_2_3 is set, the kernel will manage legacy INTx interrupts
+via the PCI-2.3-compliant device-level mask, thus enable IRQ sharing with other
+assigned devices or host devices. KVM_DEV_ASSIGN_MASK_INTX specifies the
+guest's view on the INTx mask, see KVM_ASSIGN_SET_INTX_MASK for details.
+
+The KVM_DEV_ASSIGN_ENABLE_IOMMU flag is a mandatory option to ensure
+isolation of the device. Usages not specifying this flag are deprecated.
+
+Only PCI header type 0 devices with PCI BAR resources are supported by
+device assignment. The user requesting this ioctl must have read/write
+access to the PCI sysfs resource files associated with the device.
+
+Errors:
+ ENOTTY: kernel does not support this ioctl
+
+ Other error conditions may be defined by individual device types or
+ have their standard meanings.
+
+
+4.49 KVM_DEASSIGN_PCI_DEVICE
+
+Capability: none
+Architectures: x86
+Type: vm ioctl
+Parameters: struct kvm_assigned_pci_dev (in)
+Returns: 0 on success, -1 on error
+
+Ends PCI device assignment, releasing all associated resources.
+
+See KVM_ASSIGN_PCI_DEVICE for the data structure. Only assigned_dev_id is
+used in kvm_assigned_pci_dev to identify the device.
+
+Errors:
+ ENOTTY: kernel does not support this ioctl
+
+ Other error conditions may be defined by individual device types or
+ have their standard meanings.
+
+4.50 KVM_ASSIGN_DEV_IRQ
+
+Capability: KVM_CAP_ASSIGN_DEV_IRQ
+Architectures: x86
+Type: vm ioctl
+Parameters: struct kvm_assigned_irq (in)
+Returns: 0 on success, -1 on error
+
+Assigns an IRQ to a passed-through device.
+
+struct kvm_assigned_irq {
+ __u32 assigned_dev_id;
+ __u32 host_irq; /* ignored (legacy field) */
+ __u32 guest_irq;
+ __u32 flags;
+ union {
+ __u32 reserved[12];
+ };
+};
+
+The following flags are defined:
+
+#define KVM_DEV_IRQ_HOST_INTX (1 << 0)
+#define KVM_DEV_IRQ_HOST_MSI (1 << 1)
+#define KVM_DEV_IRQ_HOST_MSIX (1 << 2)
+
+#define KVM_DEV_IRQ_GUEST_INTX (1 << 8)
+#define KVM_DEV_IRQ_GUEST_MSI (1 << 9)
+#define KVM_DEV_IRQ_GUEST_MSIX (1 << 10)
+
+It is not valid to specify multiple types per host or guest IRQ. However, the
+IRQ type of host and guest can differ or can even be null.
+
+Errors:
+ ENOTTY: kernel does not support this ioctl
+
+ Other error conditions may be defined by individual device types or
+ have their standard meanings.
+
+
+4.51 KVM_DEASSIGN_DEV_IRQ
+
+Capability: KVM_CAP_ASSIGN_DEV_IRQ
+Architectures: x86
+Type: vm ioctl
+Parameters: struct kvm_assigned_irq (in)
+Returns: 0 on success, -1 on error
+
+Ends an IRQ assignment to a passed-through device.
+
+See KVM_ASSIGN_DEV_IRQ for the data structure. The target device is specified
+by assigned_dev_id, flags must correspond to the IRQ type specified on
+KVM_ASSIGN_DEV_IRQ. Partial deassignment of host or guest IRQ is allowed.
+
+
+4.52 KVM_SET_GSI_ROUTING
+
+Capability: KVM_CAP_IRQ_ROUTING
+Architectures: x86 s390
+Type: vm ioctl
+Parameters: struct kvm_irq_routing (in)
+Returns: 0 on success, -1 on error
+
+Sets the GSI routing table entries, overwriting any previously set entries.
+
+struct kvm_irq_routing {
+ __u32 nr;
+ __u32 flags;
+ struct kvm_irq_routing_entry entries[0];
+};
+
+No flags are specified so far, the corresponding field must be set to zero.
+
+struct kvm_irq_routing_entry {
+ __u32 gsi;
+ __u32 type;
+ __u32 flags;
+ __u32 pad;
+ union {
+ struct kvm_irq_routing_irqchip irqchip;
+ struct kvm_irq_routing_msi msi;
+ struct kvm_irq_routing_s390_adapter adapter;
+ __u32 pad[8];
+ } u;
+};
+
+/* gsi routing entry types */
+#define KVM_IRQ_ROUTING_IRQCHIP 1
+#define KVM_IRQ_ROUTING_MSI 2
+#define KVM_IRQ_ROUTING_S390_ADAPTER 3
+
+No flags are specified so far, the corresponding field must be set to zero.
+
+struct kvm_irq_routing_irqchip {
+ __u32 irqchip;
+ __u32 pin;
+};
+
+struct kvm_irq_routing_msi {
+ __u32 address_lo;
+ __u32 address_hi;
+ __u32 data;
+ __u32 pad;
+};
+
+struct kvm_irq_routing_s390_adapter {
+ __u64 ind_addr;
+ __u64 summary_addr;
+ __u64 ind_offset;
+ __u32 summary_offset;
+ __u32 adapter_id;
+};
+
+
+4.53 KVM_ASSIGN_SET_MSIX_NR
+
+Capability: none
+Architectures: x86
+Type: vm ioctl
+Parameters: struct kvm_assigned_msix_nr (in)
+Returns: 0 on success, -1 on error
+
+Set the number of MSI-X interrupts for an assigned device. The number is
+reset again by terminating the MSI-X assignment of the device via
+KVM_DEASSIGN_DEV_IRQ. Calling this service more than once at any earlier
+point will fail.
+
+struct kvm_assigned_msix_nr {
+ __u32 assigned_dev_id;
+ __u16 entry_nr;
+ __u16 padding;
+};
+
+#define KVM_MAX_MSIX_PER_DEV 256
+
+
+4.54 KVM_ASSIGN_SET_MSIX_ENTRY
+
+Capability: none
+Architectures: x86
+Type: vm ioctl
+Parameters: struct kvm_assigned_msix_entry (in)
+Returns: 0 on success, -1 on error
+
+Specifies the routing of an MSI-X assigned device interrupt to a GSI. Setting
+the GSI vector to zero means disabling the interrupt.
+
+struct kvm_assigned_msix_entry {
+ __u32 assigned_dev_id;
+ __u32 gsi;
+ __u16 entry; /* The index of entry in the MSI-X table */
+ __u16 padding[3];
+};
+
+Errors:
+ ENOTTY: kernel does not support this ioctl
+
+ Other error conditions may be defined by individual device types or
+ have their standard meanings.
+
+
+4.55 KVM_SET_TSC_KHZ
+
+Capability: KVM_CAP_TSC_CONTROL
+Architectures: x86
+Type: vcpu ioctl
+Parameters: virtual tsc_khz
+Returns: 0 on success, -1 on error
+
+Specifies the tsc frequency for the virtual machine. The unit of the
+frequency is KHz.
+
+
+4.56 KVM_GET_TSC_KHZ
+
+Capability: KVM_CAP_GET_TSC_KHZ
+Architectures: x86
+Type: vcpu ioctl
+Parameters: none
+Returns: virtual tsc-khz on success, negative value on error
+
+Returns the tsc frequency of the guest. The unit of the return value is
+KHz. If the host has unstable tsc this ioctl returns -EIO instead as an
+error.
+
+
+4.57 KVM_GET_LAPIC
+
+Capability: KVM_CAP_IRQCHIP
+Architectures: x86
+Type: vcpu ioctl
+Parameters: struct kvm_lapic_state (out)
+Returns: 0 on success, -1 on error
+
+#define KVM_APIC_REG_SIZE 0x400
+struct kvm_lapic_state {
+ char regs[KVM_APIC_REG_SIZE];
+};
+
+Reads the Local APIC registers and copies them into the input argument. The
+data format and layout are the same as documented in the architecture manual.
+
+
+4.58 KVM_SET_LAPIC
+
+Capability: KVM_CAP_IRQCHIP
+Architectures: x86
+Type: vcpu ioctl
+Parameters: struct kvm_lapic_state (in)
+Returns: 0 on success, -1 on error
+
+#define KVM_APIC_REG_SIZE 0x400
+struct kvm_lapic_state {
+ char regs[KVM_APIC_REG_SIZE];
+};
+
+Copies the input argument into the Local APIC registers. The data format
+and layout are the same as documented in the architecture manual.
+
+
+4.59 KVM_IOEVENTFD
+
+Capability: KVM_CAP_IOEVENTFD
+Architectures: all
+Type: vm ioctl
+Parameters: struct kvm_ioeventfd (in)
+Returns: 0 on success, !0 on error
+
+This ioctl attaches or detaches an ioeventfd to a legal pio/mmio address
+within the guest. A guest write in the registered address will signal the
+provided event instead of triggering an exit.
+
+struct kvm_ioeventfd {
+ __u64 datamatch;
+ __u64 addr; /* legal pio/mmio address */
+ __u32 len; /* 1, 2, 4, or 8 bytes */
+ __s32 fd;
+ __u32 flags;
+ __u8 pad[36];
+};
+
+For the special case of virtio-ccw devices on s390, the ioevent is matched
+to a subchannel/virtqueue tuple instead.
+
+The following flags are defined:
+
+#define KVM_IOEVENTFD_FLAG_DATAMATCH (1 << kvm_ioeventfd_flag_nr_datamatch)
+#define KVM_IOEVENTFD_FLAG_PIO (1 << kvm_ioeventfd_flag_nr_pio)
+#define KVM_IOEVENTFD_FLAG_DEASSIGN (1 << kvm_ioeventfd_flag_nr_deassign)
+#define KVM_IOEVENTFD_FLAG_VIRTIO_CCW_NOTIFY \
+ (1 << kvm_ioeventfd_flag_nr_virtio_ccw_notify)
+
+If datamatch flag is set, the event will be signaled only if the written value
+to the registered address is equal to datamatch in struct kvm_ioeventfd.
+
+For virtio-ccw devices, addr contains the subchannel id and datamatch the
+virtqueue index.
+
+
+4.60 KVM_DIRTY_TLB
+
+Capability: KVM_CAP_SW_TLB
+Architectures: ppc
+Type: vcpu ioctl
+Parameters: struct kvm_dirty_tlb (in)
+Returns: 0 on success, -1 on error
+
+struct kvm_dirty_tlb {
+ __u64 bitmap;
+ __u32 num_dirty;
+};
+
+This must be called whenever userspace has changed an entry in the shared
+TLB, prior to calling KVM_RUN on the associated vcpu.
+
+The "bitmap" field is the userspace address of an array. This array
+consists of a number of bits, equal to the total number of TLB entries as
+determined by the last successful call to KVM_CONFIG_TLB, rounded up to the
+nearest multiple of 64.
+
+Each bit corresponds to one TLB entry, ordered the same as in the shared TLB
+array.
+
+The array is little-endian: the bit 0 is the least significant bit of the
+first byte, bit 8 is the least significant bit of the second byte, etc.
+This avoids any complications with differing word sizes.
+
+The "num_dirty" field is a performance hint for KVM to determine whether it
+should skip processing the bitmap and just invalidate everything. It must
+be set to the number of set bits in the bitmap.
+
+
+4.61 KVM_ASSIGN_SET_INTX_MASK
+
+Capability: KVM_CAP_PCI_2_3
+Architectures: x86
+Type: vm ioctl
+Parameters: struct kvm_assigned_pci_dev (in)
+Returns: 0 on success, -1 on error
+
+Allows userspace to mask PCI INTx interrupts from the assigned device. The
+kernel will not deliver INTx interrupts to the guest between setting and
+clearing of KVM_ASSIGN_SET_INTX_MASK via this interface. This enables use of
+and emulation of PCI 2.3 INTx disable command register behavior.
+
+This may be used for both PCI 2.3 devices supporting INTx disable natively and
+older devices lacking this support. Userspace is responsible for emulating the
+read value of the INTx disable bit in the guest visible PCI command register.
+When modifying the INTx disable state, userspace should precede updating the
+physical device command register by calling this ioctl to inform the kernel of
+the new intended INTx mask state.
+
+Note that the kernel uses the device INTx disable bit to internally manage the
+device interrupt state for PCI 2.3 devices. Reads of this register may
+therefore not match the expected value. Writes should always use the guest
+intended INTx disable value rather than attempting to read-copy-update the
+current physical device state. Races between user and kernel updates to the
+INTx disable bit are handled lazily in the kernel. It's possible the device
+may generate unintended interrupts, but they will not be injected into the
+guest.
+
+See KVM_ASSIGN_DEV_IRQ for the data structure. The target device is specified
+by assigned_dev_id. In the flags field, only KVM_DEV_ASSIGN_MASK_INTX is
+evaluated.
+
+
+4.62 KVM_CREATE_SPAPR_TCE
+
+Capability: KVM_CAP_SPAPR_TCE
+Architectures: powerpc
+Type: vm ioctl
+Parameters: struct kvm_create_spapr_tce (in)
+Returns: file descriptor for manipulating the created TCE table
+
+This creates a virtual TCE (translation control entry) table, which
+is an IOMMU for PAPR-style virtual I/O. It is used to translate
+logical addresses used in virtual I/O into guest physical addresses,
+and provides a scatter/gather capability for PAPR virtual I/O.
+
+/* for KVM_CAP_SPAPR_TCE */
+struct kvm_create_spapr_tce {
+ __u64 liobn;
+ __u32 window_size;
+};
+
+The liobn field gives the logical IO bus number for which to create a
+TCE table. The window_size field specifies the size of the DMA window
+which this TCE table will translate - the table will contain one 64
+bit TCE entry for every 4kiB of the DMA window.
+
+When the guest issues an H_PUT_TCE hcall on a liobn for which a TCE
+table has been created using this ioctl(), the kernel will handle it
+in real mode, updating the TCE table. H_PUT_TCE calls for other
+liobns will cause a vm exit and must be handled by userspace.
+
+The return value is a file descriptor which can be passed to mmap(2)
+to map the created TCE table into userspace. This lets userspace read
+the entries written by kernel-handled H_PUT_TCE calls, and also lets
+userspace update the TCE table directly which is useful in some
+circumstances.
+
+
+4.63 KVM_ALLOCATE_RMA
+
+Capability: KVM_CAP_PPC_RMA
+Architectures: powerpc
+Type: vm ioctl
+Parameters: struct kvm_allocate_rma (out)
+Returns: file descriptor for mapping the allocated RMA
+
+This allocates a Real Mode Area (RMA) from the pool allocated at boot
+time by the kernel. An RMA is a physically-contiguous, aligned region
+of memory used on older POWER processors to provide the memory which
+will be accessed by real-mode (MMU off) accesses in a KVM guest.
+POWER processors support a set of sizes for the RMA that usually
+includes 64MB, 128MB, 256MB and some larger powers of two.
+
+/* for KVM_ALLOCATE_RMA */
+struct kvm_allocate_rma {
+ __u64 rma_size;
+};
+
+The return value is a file descriptor which can be passed to mmap(2)
+to map the allocated RMA into userspace. The mapped area can then be
+passed to the KVM_SET_USER_MEMORY_REGION ioctl to establish it as the
+RMA for a virtual machine. The size of the RMA in bytes (which is
+fixed at host kernel boot time) is returned in the rma_size field of
+the argument structure.
+
+The KVM_CAP_PPC_RMA capability is 1 or 2 if the KVM_ALLOCATE_RMA ioctl
+is supported; 2 if the processor requires all virtual machines to have
+an RMA, or 1 if the processor can use an RMA but doesn't require it,
+because it supports the Virtual RMA (VRMA) facility.
+
+
+4.64 KVM_NMI
+
+Capability: KVM_CAP_USER_NMI
+Architectures: x86
+Type: vcpu ioctl
+Parameters: none
+Returns: 0 on success, -1 on error
+
+Queues an NMI on the thread's vcpu. Note this is well defined only
+when KVM_CREATE_IRQCHIP has not been called, since this is an interface
+between the virtual cpu core and virtual local APIC. After KVM_CREATE_IRQCHIP
+has been called, this interface is completely emulated within the kernel.
+
+To use this to emulate the LINT1 input with KVM_CREATE_IRQCHIP, use the
+following algorithm:
+
+ - pause the vpcu
+ - read the local APIC's state (KVM_GET_LAPIC)
+ - check whether changing LINT1 will queue an NMI (see the LVT entry for LINT1)
+ - if so, issue KVM_NMI
+ - resume the vcpu
+
+Some guests configure the LINT1 NMI input to cause a panic, aiding in
+debugging.
+
+
+4.65 KVM_S390_UCAS_MAP
+
+Capability: KVM_CAP_S390_UCONTROL
+Architectures: s390
+Type: vcpu ioctl
+Parameters: struct kvm_s390_ucas_mapping (in)
+Returns: 0 in case of success
+
+The parameter is defined like this:
+ struct kvm_s390_ucas_mapping {
+ __u64 user_addr;
+ __u64 vcpu_addr;
+ __u64 length;
+ };
+
+This ioctl maps the memory at "user_addr" with the length "length" to
+the vcpu's address space starting at "vcpu_addr". All parameters need to
+be aligned by 1 megabyte.
+
+
+4.66 KVM_S390_UCAS_UNMAP
+
+Capability: KVM_CAP_S390_UCONTROL
+Architectures: s390
+Type: vcpu ioctl
+Parameters: struct kvm_s390_ucas_mapping (in)
+Returns: 0 in case of success
+
+The parameter is defined like this:
+ struct kvm_s390_ucas_mapping {
+ __u64 user_addr;
+ __u64 vcpu_addr;
+ __u64 length;
+ };
+
+This ioctl unmaps the memory in the vcpu's address space starting at
+"vcpu_addr" with the length "length". The field "user_addr" is ignored.
+All parameters need to be aligned by 1 megabyte.
+
+
+4.67 KVM_S390_VCPU_FAULT
+
+Capability: KVM_CAP_S390_UCONTROL
+Architectures: s390
+Type: vcpu ioctl
+Parameters: vcpu absolute address (in)
+Returns: 0 in case of success
+
+This call creates a page table entry on the virtual cpu's address space
+(for user controlled virtual machines) or the virtual machine's address
+space (for regular virtual machines). This only works for minor faults,
+thus it's recommended to access subject memory page via the user page
+table upfront. This is useful to handle validity intercepts for user
+controlled virtual machines to fault in the virtual cpu's lowcore pages
+prior to calling the KVM_RUN ioctl.
+
+
+4.68 KVM_SET_ONE_REG
+
+Capability: KVM_CAP_ONE_REG
+Architectures: all
+Type: vcpu ioctl
+Parameters: struct kvm_one_reg (in)
+Returns: 0 on success, negative value on failure
+
+struct kvm_one_reg {
+ __u64 id;
+ __u64 addr;
+};
+
+Using this ioctl, a single vcpu register can be set to a specific value
+defined by user space with the passed in struct kvm_one_reg, where id
+refers to the register identifier as described below and addr is a pointer
+to a variable with the respective size. There can be architecture agnostic
+and architecture specific registers. Each have their own range of operation
+and their own constants and width. To keep track of the implemented
+registers, find a list below:
+
+ Arch | Register | Width (bits)
+ | |
+ PPC | KVM_REG_PPC_HIOR | 64
+ PPC | KVM_REG_PPC_IAC1 | 64
+ PPC | KVM_REG_PPC_IAC2 | 64
+ PPC | KVM_REG_PPC_IAC3 | 64
+ PPC | KVM_REG_PPC_IAC4 | 64
+ PPC | KVM_REG_PPC_DAC1 | 64
+ PPC | KVM_REG_PPC_DAC2 | 64
+ PPC | KVM_REG_PPC_DABR | 64
+ PPC | KVM_REG_PPC_DSCR | 64
+ PPC | KVM_REG_PPC_PURR | 64
+ PPC | KVM_REG_PPC_SPURR | 64
+ PPC | KVM_REG_PPC_DAR | 64
+ PPC | KVM_REG_PPC_DSISR | 32
+ PPC | KVM_REG_PPC_AMR | 64
+ PPC | KVM_REG_PPC_UAMOR | 64
+ PPC | KVM_REG_PPC_MMCR0 | 64
+ PPC | KVM_REG_PPC_MMCR1 | 64
+ PPC | KVM_REG_PPC_MMCRA | 64
+ PPC | KVM_REG_PPC_MMCR2 | 64
+ PPC | KVM_REG_PPC_MMCRS | 64
+ PPC | KVM_REG_PPC_SIAR | 64
+ PPC | KVM_REG_PPC_SDAR | 64
+ PPC | KVM_REG_PPC_SIER | 64
+ PPC | KVM_REG_PPC_PMC1 | 32
+ PPC | KVM_REG_PPC_PMC2 | 32
+ PPC | KVM_REG_PPC_PMC3 | 32
+ PPC | KVM_REG_PPC_PMC4 | 32
+ PPC | KVM_REG_PPC_PMC5 | 32
+ PPC | KVM_REG_PPC_PMC6 | 32
+ PPC | KVM_REG_PPC_PMC7 | 32
+ PPC | KVM_REG_PPC_PMC8 | 32
+ PPC | KVM_REG_PPC_FPR0 | 64
+ ...
+ PPC | KVM_REG_PPC_FPR31 | 64
+ PPC | KVM_REG_PPC_VR0 | 128
+ ...
+ PPC | KVM_REG_PPC_VR31 | 128
+ PPC | KVM_REG_PPC_VSR0 | 128
+ ...
+ PPC | KVM_REG_PPC_VSR31 | 128
+ PPC | KVM_REG_PPC_FPSCR | 64
+ PPC | KVM_REG_PPC_VSCR | 32
+ PPC | KVM_REG_PPC_VPA_ADDR | 64
+ PPC | KVM_REG_PPC_VPA_SLB | 128
+ PPC | KVM_REG_PPC_VPA_DTL | 128
+ PPC | KVM_REG_PPC_EPCR | 32
+ PPC | KVM_REG_PPC_EPR | 32
+ PPC | KVM_REG_PPC_TCR | 32
+ PPC | KVM_REG_PPC_TSR | 32
+ PPC | KVM_REG_PPC_OR_TSR | 32
+ PPC | KVM_REG_PPC_CLEAR_TSR | 32
+ PPC | KVM_REG_PPC_MAS0 | 32
+ PPC | KVM_REG_PPC_MAS1 | 32
+ PPC | KVM_REG_PPC_MAS2 | 64
+ PPC | KVM_REG_PPC_MAS7_3 | 64
+ PPC | KVM_REG_PPC_MAS4 | 32
+ PPC | KVM_REG_PPC_MAS6 | 32
+ PPC | KVM_REG_PPC_MMUCFG | 32
+ PPC | KVM_REG_PPC_TLB0CFG | 32
+ PPC | KVM_REG_PPC_TLB1CFG | 32
+ PPC | KVM_REG_PPC_TLB2CFG | 32
+ PPC | KVM_REG_PPC_TLB3CFG | 32
+ PPC | KVM_REG_PPC_TLB0PS | 32
+ PPC | KVM_REG_PPC_TLB1PS | 32
+ PPC | KVM_REG_PPC_TLB2PS | 32
+ PPC | KVM_REG_PPC_TLB3PS | 32
+ PPC | KVM_REG_PPC_EPTCFG | 32
+ PPC | KVM_REG_PPC_ICP_STATE | 64
+ PPC | KVM_REG_PPC_TB_OFFSET | 64
+ PPC | KVM_REG_PPC_SPMC1 | 32
+ PPC | KVM_REG_PPC_SPMC2 | 32
+ PPC | KVM_REG_PPC_IAMR | 64
+ PPC | KVM_REG_PPC_TFHAR | 64
+ PPC | KVM_REG_PPC_TFIAR | 64
+ PPC | KVM_REG_PPC_TEXASR | 64
+ PPC | KVM_REG_PPC_FSCR | 64
+ PPC | KVM_REG_PPC_PSPB | 32
+ PPC | KVM_REG_PPC_EBBHR | 64
+ PPC | KVM_REG_PPC_EBBRR | 64
+ PPC | KVM_REG_PPC_BESCR | 64
+ PPC | KVM_REG_PPC_TAR | 64
+ PPC | KVM_REG_PPC_DPDES | 64
+ PPC | KVM_REG_PPC_DAWR | 64
+ PPC | KVM_REG_PPC_DAWRX | 64
+ PPC | KVM_REG_PPC_CIABR | 64
+ PPC | KVM_REG_PPC_IC | 64
+ PPC | KVM_REG_PPC_VTB | 64
+ PPC | KVM_REG_PPC_CSIGR | 64
+ PPC | KVM_REG_PPC_TACR | 64
+ PPC | KVM_REG_PPC_TCSCR | 64
+ PPC | KVM_REG_PPC_PID | 64
+ PPC | KVM_REG_PPC_ACOP | 64
+ PPC | KVM_REG_PPC_VRSAVE | 32
+ PPC | KVM_REG_PPC_LPCR | 32
+ PPC | KVM_REG_PPC_LPCR_64 | 64
+ PPC | KVM_REG_PPC_PPR | 64
+ PPC | KVM_REG_PPC_ARCH_COMPAT | 32
+ PPC | KVM_REG_PPC_DABRX | 32
+ PPC | KVM_REG_PPC_WORT | 64
+ PPC | KVM_REG_PPC_SPRG9 | 64
+ PPC | KVM_REG_PPC_DBSR | 32
+ PPC | KVM_REG_PPC_TM_GPR0 | 64
+ ...
+ PPC | KVM_REG_PPC_TM_GPR31 | 64
+ PPC | KVM_REG_PPC_TM_VSR0 | 128
+ ...
+ PPC | KVM_REG_PPC_TM_VSR63 | 128
+ PPC | KVM_REG_PPC_TM_CR | 64
+ PPC | KVM_REG_PPC_TM_LR | 64
+ PPC | KVM_REG_PPC_TM_CTR | 64
+ PPC | KVM_REG_PPC_TM_FPSCR | 64
+ PPC | KVM_REG_PPC_TM_AMR | 64
+ PPC | KVM_REG_PPC_TM_PPR | 64
+ PPC | KVM_REG_PPC_TM_VRSAVE | 64
+ PPC | KVM_REG_PPC_TM_VSCR | 32
+ PPC | KVM_REG_PPC_TM_DSCR | 64
+ PPC | KVM_REG_PPC_TM_TAR | 64
+ | |
+ MIPS | KVM_REG_MIPS_R0 | 64
+ ...
+ MIPS | KVM_REG_MIPS_R31 | 64
+ MIPS | KVM_REG_MIPS_HI | 64
+ MIPS | KVM_REG_MIPS_LO | 64
+ MIPS | KVM_REG_MIPS_PC | 64
+ MIPS | KVM_REG_MIPS_CP0_INDEX | 32
+ MIPS | KVM_REG_MIPS_CP0_CONTEXT | 64
+ MIPS | KVM_REG_MIPS_CP0_USERLOCAL | 64
+ MIPS | KVM_REG_MIPS_CP0_PAGEMASK | 32
+ MIPS | KVM_REG_MIPS_CP0_WIRED | 32
+ MIPS | KVM_REG_MIPS_CP0_HWRENA | 32
+ MIPS | KVM_REG_MIPS_CP0_BADVADDR | 64
+ MIPS | KVM_REG_MIPS_CP0_COUNT | 32
+ MIPS | KVM_REG_MIPS_CP0_ENTRYHI | 64
+ MIPS | KVM_REG_MIPS_CP0_COMPARE | 32
+ MIPS | KVM_REG_MIPS_CP0_STATUS | 32
+ MIPS | KVM_REG_MIPS_CP0_CAUSE | 32
+ MIPS | KVM_REG_MIPS_CP0_EPC | 64
+ MIPS | KVM_REG_MIPS_CP0_PRID | 32
+ MIPS | KVM_REG_MIPS_CP0_CONFIG | 32
+ MIPS | KVM_REG_MIPS_CP0_CONFIG1 | 32
+ MIPS | KVM_REG_MIPS_CP0_CONFIG2 | 32
+ MIPS | KVM_REG_MIPS_CP0_CONFIG3 | 32
+ MIPS | KVM_REG_MIPS_CP0_CONFIG4 | 32
+ MIPS | KVM_REG_MIPS_CP0_CONFIG5 | 32
+ MIPS | KVM_REG_MIPS_CP0_CONFIG7 | 32
+ MIPS | KVM_REG_MIPS_CP0_ERROREPC | 64
+ MIPS | KVM_REG_MIPS_COUNT_CTL | 64
+ MIPS | KVM_REG_MIPS_COUNT_RESUME | 64
+ MIPS | KVM_REG_MIPS_COUNT_HZ | 64
+ MIPS | KVM_REG_MIPS_FPR_32(0..31) | 32
+ MIPS | KVM_REG_MIPS_FPR_64(0..31) | 64
+ MIPS | KVM_REG_MIPS_VEC_128(0..31) | 128
+ MIPS | KVM_REG_MIPS_FCR_IR | 32
+ MIPS | KVM_REG_MIPS_FCR_CSR | 32
+ MIPS | KVM_REG_MIPS_MSA_IR | 32
+ MIPS | KVM_REG_MIPS_MSA_CSR | 32
+
+ARM registers are mapped using the lower 32 bits. The upper 16 of that
+is the register group type, or coprocessor number:
+
+ARM core registers have the following id bit patterns:
+ 0x4020 0000 0010 <index into the kvm_regs struct:16>
+
+ARM 32-bit CP15 registers have the following id bit patterns:
+ 0x4020 0000 000F <zero:1> <crn:4> <crm:4> <opc1:4> <opc2:3>
+
+ARM 64-bit CP15 registers have the following id bit patterns:
+ 0x4030 0000 000F <zero:1> <zero:4> <crm:4> <opc1:4> <zero:3>
+
+ARM CCSIDR registers are demultiplexed by CSSELR value:
+ 0x4020 0000 0011 00 <csselr:8>
+
+ARM 32-bit VFP control registers have the following id bit patterns:
+ 0x4020 0000 0012 1 <regno:12>
+
+ARM 64-bit FP registers have the following id bit patterns:
+ 0x4030 0000 0012 0 <regno:12>
+
+
+arm64 registers are mapped using the lower 32 bits. The upper 16 of
+that is the register group type, or coprocessor number:
+
+arm64 core/FP-SIMD registers have the following id bit patterns. Note
+that the size of the access is variable, as the kvm_regs structure
+contains elements ranging from 32 to 128 bits. The index is a 32bit
+value in the kvm_regs structure seen as a 32bit array.
+ 0x60x0 0000 0010 <index into the kvm_regs struct:16>
+
+arm64 CCSIDR registers are demultiplexed by CSSELR value:
+ 0x6020 0000 0011 00 <csselr:8>
+
+arm64 system registers have the following id bit patterns:
+ 0x6030 0000 0013 <op0:2> <op1:3> <crn:4> <crm:4> <op2:3>
+
+
+MIPS registers are mapped using the lower 32 bits. The upper 16 of that is
+the register group type:
+
+MIPS core registers (see above) have the following id bit patterns:
+ 0x7030 0000 0000 <reg:16>
+
+MIPS CP0 registers (see KVM_REG_MIPS_CP0_* above) have the following id bit
+patterns depending on whether they're 32-bit or 64-bit registers:
+ 0x7020 0000 0001 00 <reg:5> <sel:3> (32-bit)
+ 0x7030 0000 0001 00 <reg:5> <sel:3> (64-bit)
+
+MIPS KVM control registers (see above) have the following id bit patterns:
+ 0x7030 0000 0002 <reg:16>
+
+MIPS FPU registers (see KVM_REG_MIPS_FPR_{32,64}() above) have the following
+id bit patterns depending on the size of the register being accessed. They are
+always accessed according to the current guest FPU mode (Status.FR and
+Config5.FRE), i.e. as the guest would see them, and they become unpredictable
+if the guest FPU mode is changed. MIPS SIMD Architecture (MSA) vector
+registers (see KVM_REG_MIPS_VEC_128() above) have similar patterns as they
+overlap the FPU registers:
+ 0x7020 0000 0003 00 <0:3> <reg:5> (32-bit FPU registers)
+ 0x7030 0000 0003 00 <0:3> <reg:5> (64-bit FPU registers)
+ 0x7040 0000 0003 00 <0:3> <reg:5> (128-bit MSA vector registers)
+
+MIPS FPU control registers (see KVM_REG_MIPS_FCR_{IR,CSR} above) have the
+following id bit patterns:
+ 0x7020 0000 0003 01 <0:3> <reg:5>
+
+MIPS MSA control registers (see KVM_REG_MIPS_MSA_{IR,CSR} above) have the
+following id bit patterns:
+ 0x7020 0000 0003 02 <0:3> <reg:5>
+
+
+4.69 KVM_GET_ONE_REG
+
+Capability: KVM_CAP_ONE_REG
+Architectures: all
+Type: vcpu ioctl
+Parameters: struct kvm_one_reg (in and out)
+Returns: 0 on success, negative value on failure
+
+This ioctl allows to receive the value of a single register implemented
+in a vcpu. The register to read is indicated by the "id" field of the
+kvm_one_reg struct passed in. On success, the register value can be found
+at the memory location pointed to by "addr".
+
+The list of registers accessible using this interface is identical to the
+list in 4.68.
+
+
+4.70 KVM_KVMCLOCK_CTRL
+
+Capability: KVM_CAP_KVMCLOCK_CTRL
+Architectures: Any that implement pvclocks (currently x86 only)
+Type: vcpu ioctl
+Parameters: None
+Returns: 0 on success, -1 on error
+
+This signals to the host kernel that the specified guest is being paused by
+userspace. The host will set a flag in the pvclock structure that is checked
+from the soft lockup watchdog. The flag is part of the pvclock structure that
+is shared between guest and host, specifically the second bit of the flags
+field of the pvclock_vcpu_time_info structure. It will be set exclusively by
+the host and read/cleared exclusively by the guest. The guest operation of
+checking and clearing the flag must an atomic operation so
+load-link/store-conditional, or equivalent must be used. There are two cases
+where the guest will clear the flag: when the soft lockup watchdog timer resets
+itself or when a soft lockup is detected. This ioctl can be called any time
+after pausing the vcpu, but before it is resumed.
+
+
+4.71 KVM_SIGNAL_MSI
+
+Capability: KVM_CAP_SIGNAL_MSI
+Architectures: x86
+Type: vm ioctl
+Parameters: struct kvm_msi (in)
+Returns: >0 on delivery, 0 if guest blocked the MSI, and -1 on error
+
+Directly inject a MSI message. Only valid with in-kernel irqchip that handles
+MSI messages.
+
+struct kvm_msi {
+ __u32 address_lo;
+ __u32 address_hi;
+ __u32 data;
+ __u32 flags;
+ __u8 pad[16];
+};
+
+No flags are defined so far. The corresponding field must be 0.
+
+
+4.71 KVM_CREATE_PIT2
+
+Capability: KVM_CAP_PIT2
+Architectures: x86
+Type: vm ioctl
+Parameters: struct kvm_pit_config (in)
+Returns: 0 on success, -1 on error
+
+Creates an in-kernel device model for the i8254 PIT. This call is only valid
+after enabling in-kernel irqchip support via KVM_CREATE_IRQCHIP. The following
+parameters have to be passed:
+
+struct kvm_pit_config {
+ __u32 flags;
+ __u32 pad[15];
+};
+
+Valid flags are:
+
+#define KVM_PIT_SPEAKER_DUMMY 1 /* emulate speaker port stub */
+
+PIT timer interrupts may use a per-VM kernel thread for injection. If it
+exists, this thread will have a name of the following pattern:
+
+kvm-pit/<owner-process-pid>
+
+When running a guest with elevated priorities, the scheduling parameters of
+this thread may have to be adjusted accordingly.
+
+This IOCTL replaces the obsolete KVM_CREATE_PIT.
+
+
+4.72 KVM_GET_PIT2
+
+Capability: KVM_CAP_PIT_STATE2
+Architectures: x86
+Type: vm ioctl
+Parameters: struct kvm_pit_state2 (out)
+Returns: 0 on success, -1 on error
+
+Retrieves the state of the in-kernel PIT model. Only valid after
+KVM_CREATE_PIT2. The state is returned in the following structure:
+
+struct kvm_pit_state2 {
+ struct kvm_pit_channel_state channels[3];
+ __u32 flags;
+ __u32 reserved[9];
+};
+
+Valid flags are:
+
+/* disable PIT in HPET legacy mode */
+#define KVM_PIT_FLAGS_HPET_LEGACY 0x00000001
+
+This IOCTL replaces the obsolete KVM_GET_PIT.
+
+
+4.73 KVM_SET_PIT2
+
+Capability: KVM_CAP_PIT_STATE2
+Architectures: x86
+Type: vm ioctl
+Parameters: struct kvm_pit_state2 (in)
+Returns: 0 on success, -1 on error
+
+Sets the state of the in-kernel PIT model. Only valid after KVM_CREATE_PIT2.
+See KVM_GET_PIT2 for details on struct kvm_pit_state2.
+
+This IOCTL replaces the obsolete KVM_SET_PIT.
+
+
+4.74 KVM_PPC_GET_SMMU_INFO
+
+Capability: KVM_CAP_PPC_GET_SMMU_INFO
+Architectures: powerpc
+Type: vm ioctl
+Parameters: None
+Returns: 0 on success, -1 on error
+
+This populates and returns a structure describing the features of
+the "Server" class MMU emulation supported by KVM.
+This can in turn be used by userspace to generate the appropriate
+device-tree properties for the guest operating system.
+
+The structure contains some global information, followed by an
+array of supported segment page sizes:
+
+ struct kvm_ppc_smmu_info {
+ __u64 flags;
+ __u32 slb_size;
+ __u32 pad;
+ struct kvm_ppc_one_seg_page_size sps[KVM_PPC_PAGE_SIZES_MAX_SZ];
+ };
+
+The supported flags are:
+
+ - KVM_PPC_PAGE_SIZES_REAL:
+ When that flag is set, guest page sizes must "fit" the backing
+ store page sizes. When not set, any page size in the list can
+ be used regardless of how they are backed by userspace.
+
+ - KVM_PPC_1T_SEGMENTS
+ The emulated MMU supports 1T segments in addition to the
+ standard 256M ones.
+
+The "slb_size" field indicates how many SLB entries are supported
+
+The "sps" array contains 8 entries indicating the supported base
+page sizes for a segment in increasing order. Each entry is defined
+as follow:
+
+ struct kvm_ppc_one_seg_page_size {
+ __u32 page_shift; /* Base page shift of segment (or 0) */
+ __u32 slb_enc; /* SLB encoding for BookS */
+ struct kvm_ppc_one_page_size enc[KVM_PPC_PAGE_SIZES_MAX_SZ];
+ };
+
+An entry with a "page_shift" of 0 is unused. Because the array is
+organized in increasing order, a lookup can stop when encoutering
+such an entry.
+
+The "slb_enc" field provides the encoding to use in the SLB for the
+page size. The bits are in positions such as the value can directly
+be OR'ed into the "vsid" argument of the slbmte instruction.
+
+The "enc" array is a list which for each of those segment base page
+size provides the list of supported actual page sizes (which can be
+only larger or equal to the base page size), along with the
+corresponding encoding in the hash PTE. Similarly, the array is
+8 entries sorted by increasing sizes and an entry with a "0" shift
+is an empty entry and a terminator:
+
+ struct kvm_ppc_one_page_size {
+ __u32 page_shift; /* Page shift (or 0) */
+ __u32 pte_enc; /* Encoding in the HPTE (>>12) */
+ };
+
+The "pte_enc" field provides a value that can OR'ed into the hash
+PTE's RPN field (ie, it needs to be shifted left by 12 to OR it
+into the hash PTE second double word).
+
+4.75 KVM_IRQFD
+
+Capability: KVM_CAP_IRQFD
+Architectures: x86 s390 arm arm64
+Type: vm ioctl
+Parameters: struct kvm_irqfd (in)
+Returns: 0 on success, -1 on error
+
+Allows setting an eventfd to directly trigger a guest interrupt.
+kvm_irqfd.fd specifies the file descriptor to use as the eventfd and
+kvm_irqfd.gsi specifies the irqchip pin toggled by this event. When
+an event is triggered on the eventfd, an interrupt is injected into
+the guest using the specified gsi pin. The irqfd is removed using
+the KVM_IRQFD_FLAG_DEASSIGN flag, specifying both kvm_irqfd.fd
+and kvm_irqfd.gsi.
+
+With KVM_CAP_IRQFD_RESAMPLE, KVM_IRQFD supports a de-assert and notify
+mechanism allowing emulation of level-triggered, irqfd-based
+interrupts. When KVM_IRQFD_FLAG_RESAMPLE is set the user must pass an
+additional eventfd in the kvm_irqfd.resamplefd field. When operating
+in resample mode, posting of an interrupt through kvm_irq.fd asserts
+the specified gsi in the irqchip. When the irqchip is resampled, such
+as from an EOI, the gsi is de-asserted and the user is notified via
+kvm_irqfd.resamplefd. It is the user's responsibility to re-queue
+the interrupt if the device making use of it still requires service.
+Note that closing the resamplefd is not sufficient to disable the
+irqfd. The KVM_IRQFD_FLAG_RESAMPLE is only necessary on assignment
+and need not be specified with KVM_IRQFD_FLAG_DEASSIGN.
+
+On ARM/ARM64, the gsi field in the kvm_irqfd struct specifies the Shared
+Peripheral Interrupt (SPI) index, such that the GIC interrupt ID is
+given by gsi + 32.
+
+4.76 KVM_PPC_ALLOCATE_HTAB
+
+Capability: KVM_CAP_PPC_ALLOC_HTAB
+Architectures: powerpc
+Type: vm ioctl
+Parameters: Pointer to u32 containing hash table order (in/out)
+Returns: 0 on success, -1 on error
+
+This requests the host kernel to allocate an MMU hash table for a
+guest using the PAPR paravirtualization interface. This only does
+anything if the kernel is configured to use the Book 3S HV style of
+virtualization. Otherwise the capability doesn't exist and the ioctl
+returns an ENOTTY error. The rest of this description assumes Book 3S
+HV.
+
+There must be no vcpus running when this ioctl is called; if there
+are, it will do nothing and return an EBUSY error.
+
+The parameter is a pointer to a 32-bit unsigned integer variable
+containing the order (log base 2) of the desired size of the hash
+table, which must be between 18 and 46. On successful return from the
+ioctl, it will have been updated with the order of the hash table that
+was allocated.
+
+If no hash table has been allocated when any vcpu is asked to run
+(with the KVM_RUN ioctl), the host kernel will allocate a
+default-sized hash table (16 MB).
+
+If this ioctl is called when a hash table has already been allocated,
+the kernel will clear out the existing hash table (zero all HPTEs) and
+return the hash table order in the parameter. (If the guest is using
+the virtualized real-mode area (VRMA) facility, the kernel will
+re-create the VMRA HPTEs on the next KVM_RUN of any vcpu.)
+
+4.77 KVM_S390_INTERRUPT
+
+Capability: basic
+Architectures: s390
+Type: vm ioctl, vcpu ioctl
+Parameters: struct kvm_s390_interrupt (in)
+Returns: 0 on success, -1 on error
+
+Allows to inject an interrupt to the guest. Interrupts can be floating
+(vm ioctl) or per cpu (vcpu ioctl), depending on the interrupt type.
+
+Interrupt parameters are passed via kvm_s390_interrupt:
+
+struct kvm_s390_interrupt {
+ __u32 type;
+ __u32 parm;
+ __u64 parm64;
+};
+
+type can be one of the following:
+
+KVM_S390_SIGP_STOP (vcpu) - sigp stop; optional flags in parm
+KVM_S390_PROGRAM_INT (vcpu) - program check; code in parm
+KVM_S390_SIGP_SET_PREFIX (vcpu) - sigp set prefix; prefix address in parm
+KVM_S390_RESTART (vcpu) - restart
+KVM_S390_INT_CLOCK_COMP (vcpu) - clock comparator interrupt
+KVM_S390_INT_CPU_TIMER (vcpu) - CPU timer interrupt
+KVM_S390_INT_VIRTIO (vm) - virtio external interrupt; external interrupt
+ parameters in parm and parm64
+KVM_S390_INT_SERVICE (vm) - sclp external interrupt; sclp parameter in parm
+KVM_S390_INT_EMERGENCY (vcpu) - sigp emergency; source cpu in parm
+KVM_S390_INT_EXTERNAL_CALL (vcpu) - sigp external call; source cpu in parm
+KVM_S390_INT_IO(ai,cssid,ssid,schid) (vm) - compound value to indicate an
+ I/O interrupt (ai - adapter interrupt; cssid,ssid,schid - subchannel);
+ I/O interruption parameters in parm (subchannel) and parm64 (intparm,
+ interruption subclass)
+KVM_S390_MCHK (vm, vcpu) - machine check interrupt; cr 14 bits in parm,
+ machine check interrupt code in parm64 (note that
+ machine checks needing further payload are not
+ supported by this ioctl)
+
+Note that the vcpu ioctl is asynchronous to vcpu execution.
+
+4.78 KVM_PPC_GET_HTAB_FD
+
+Capability: KVM_CAP_PPC_HTAB_FD
+Architectures: powerpc
+Type: vm ioctl
+Parameters: Pointer to struct kvm_get_htab_fd (in)
+Returns: file descriptor number (>= 0) on success, -1 on error
+
+This returns a file descriptor that can be used either to read out the
+entries in the guest's hashed page table (HPT), or to write entries to
+initialize the HPT. The returned fd can only be written to if the
+KVM_GET_HTAB_WRITE bit is set in the flags field of the argument, and
+can only be read if that bit is clear. The argument struct looks like
+this:
+
+/* For KVM_PPC_GET_HTAB_FD */
+struct kvm_get_htab_fd {
+ __u64 flags;
+ __u64 start_index;
+ __u64 reserved[2];
+};
+
+/* Values for kvm_get_htab_fd.flags */
+#define KVM_GET_HTAB_BOLTED_ONLY ((__u64)0x1)
+#define KVM_GET_HTAB_WRITE ((__u64)0x2)
+
+The `start_index' field gives the index in the HPT of the entry at
+which to start reading. It is ignored when writing.
+
+Reads on the fd will initially supply information about all
+"interesting" HPT entries. Interesting entries are those with the
+bolted bit set, if the KVM_GET_HTAB_BOLTED_ONLY bit is set, otherwise
+all entries. When the end of the HPT is reached, the read() will
+return. If read() is called again on the fd, it will start again from
+the beginning of the HPT, but will only return HPT entries that have
+changed since they were last read.
+
+Data read or written is structured as a header (8 bytes) followed by a
+series of valid HPT entries (16 bytes) each. The header indicates how
+many valid HPT entries there are and how many invalid entries follow
+the valid entries. The invalid entries are not represented explicitly
+in the stream. The header format is:
+
+struct kvm_get_htab_header {
+ __u32 index;
+ __u16 n_valid;
+ __u16 n_invalid;
+};
+
+Writes to the fd create HPT entries starting at the index given in the
+header; first `n_valid' valid entries with contents from the data
+written, then `n_invalid' invalid entries, invalidating any previously
+valid entries found.
+
+4.79 KVM_CREATE_DEVICE
+
+Capability: KVM_CAP_DEVICE_CTRL
+Type: vm ioctl
+Parameters: struct kvm_create_device (in/out)
+Returns: 0 on success, -1 on error
+Errors:
+ ENODEV: The device type is unknown or unsupported
+ EEXIST: Device already created, and this type of device may not
+ be instantiated multiple times
+
+ Other error conditions may be defined by individual device types or
+ have their standard meanings.
+
+Creates an emulated device in the kernel. The file descriptor returned
+in fd can be used with KVM_SET/GET/HAS_DEVICE_ATTR.
+
+If the KVM_CREATE_DEVICE_TEST flag is set, only test whether the
+device type is supported (not necessarily whether it can be created
+in the current vm).
+
+Individual devices should not define flags. Attributes should be used
+for specifying any behavior that is not implied by the device type
+number.
+
+struct kvm_create_device {
+ __u32 type; /* in: KVM_DEV_TYPE_xxx */
+ __u32 fd; /* out: device handle */
+ __u32 flags; /* in: KVM_CREATE_DEVICE_xxx */
+};
+
+4.80 KVM_SET_DEVICE_ATTR/KVM_GET_DEVICE_ATTR
+
+Capability: KVM_CAP_DEVICE_CTRL, KVM_CAP_VM_ATTRIBUTES for vm device
+Type: device ioctl, vm ioctl
+Parameters: struct kvm_device_attr
+Returns: 0 on success, -1 on error
+Errors:
+ ENXIO: The group or attribute is unknown/unsupported for this device
+ EPERM: The attribute cannot (currently) be accessed this way
+ (e.g. read-only attribute, or attribute that only makes
+ sense when the device is in a different state)
+
+ Other error conditions may be defined by individual device types.
+
+Gets/sets a specified piece of device configuration and/or state. The
+semantics are device-specific. See individual device documentation in
+the "devices" directory. As with ONE_REG, the size of the data
+transferred is defined by the particular attribute.
+
+struct kvm_device_attr {
+ __u32 flags; /* no flags currently defined */
+ __u32 group; /* device-defined */
+ __u64 attr; /* group-defined */
+ __u64 addr; /* userspace address of attr data */
+};
+
+4.81 KVM_HAS_DEVICE_ATTR
+
+Capability: KVM_CAP_DEVICE_CTRL, KVM_CAP_VM_ATTRIBUTES for vm device
+Type: device ioctl, vm ioctl
+Parameters: struct kvm_device_attr
+Returns: 0 on success, -1 on error
+Errors:
+ ENXIO: The group or attribute is unknown/unsupported for this device
+
+Tests whether a device supports a particular attribute. A successful
+return indicates the attribute is implemented. It does not necessarily
+indicate that the attribute can be read or written in the device's
+current state. "addr" is ignored.
+
+4.82 KVM_ARM_VCPU_INIT
+
+Capability: basic
+Architectures: arm, arm64
+Type: vcpu ioctl
+Parameters: struct kvm_vcpu_init (in)
+Returns: 0 on success; -1 on error
+Errors:
+  EINVAL:    the target is unknown, or the combination of features is invalid.
+  ENOENT:    a features bit specified is unknown.
+
+This tells KVM what type of CPU to present to the guest, and what
+optional features it should have.  This will cause a reset of the cpu
+registers to their initial values.  If this is not called, KVM_RUN will
+return ENOEXEC for that vcpu.
+
+Note that because some registers reflect machine topology, all vcpus
+should be created before this ioctl is invoked.
+
+Userspace can call this function multiple times for a given vcpu, including
+after the vcpu has been run. This will reset the vcpu to its initial
+state. All calls to this function after the initial call must use the same
+target and same set of feature flags, otherwise EINVAL will be returned.
+
+Possible features:
+ - KVM_ARM_VCPU_POWER_OFF: Starts the CPU in a power-off state.
+ Depends on KVM_CAP_ARM_PSCI. If not set, the CPU will be powered on
+ and execute guest code when KVM_RUN is called.
+ - KVM_ARM_VCPU_EL1_32BIT: Starts the CPU in a 32bit mode.
+ Depends on KVM_CAP_ARM_EL1_32BIT (arm64 only).
+ - KVM_ARM_VCPU_PSCI_0_2: Emulate PSCI v0.2 for the CPU.
+ Depends on KVM_CAP_ARM_PSCI_0_2.
+
+
+4.83 KVM_ARM_PREFERRED_TARGET
+
+Capability: basic
+Architectures: arm, arm64
+Type: vm ioctl
+Parameters: struct struct kvm_vcpu_init (out)
+Returns: 0 on success; -1 on error
+Errors:
+ ENODEV: no preferred target available for the host
+
+This queries KVM for preferred CPU target type which can be emulated
+by KVM on underlying host.
+
+The ioctl returns struct kvm_vcpu_init instance containing information
+about preferred CPU target type and recommended features for it. The
+kvm_vcpu_init->features bitmap returned will have feature bits set if
+the preferred target recommends setting these features, but this is
+not mandatory.
+
+The information returned by this ioctl can be used to prepare an instance
+of struct kvm_vcpu_init for KVM_ARM_VCPU_INIT ioctl which will result in
+in VCPU matching underlying host.
+
+
+4.84 KVM_GET_REG_LIST
+
+Capability: basic
+Architectures: arm, arm64, mips
+Type: vcpu ioctl
+Parameters: struct kvm_reg_list (in/out)
+Returns: 0 on success; -1 on error
+Errors:
+  E2BIG:     the reg index list is too big to fit in the array specified by
+             the user (the number required will be written into n).
+
+struct kvm_reg_list {
+ __u64 n; /* number of registers in reg[] */
+ __u64 reg[0];
+};
+
+This ioctl returns the guest registers that are supported for the
+KVM_GET_ONE_REG/KVM_SET_ONE_REG calls.
+
+
+4.85 KVM_ARM_SET_DEVICE_ADDR (deprecated)
+
+Capability: KVM_CAP_ARM_SET_DEVICE_ADDR
+Architectures: arm, arm64
+Type: vm ioctl
+Parameters: struct kvm_arm_device_address (in)
+Returns: 0 on success, -1 on error
+Errors:
+ ENODEV: The device id is unknown
+ ENXIO: Device not supported on current system
+ EEXIST: Address already set
+ E2BIG: Address outside guest physical address space
+ EBUSY: Address overlaps with other device range
+
+struct kvm_arm_device_addr {
+ __u64 id;
+ __u64 addr;
+};
+
+Specify a device address in the guest's physical address space where guests
+can access emulated or directly exposed devices, which the host kernel needs
+to know about. The id field is an architecture specific identifier for a
+specific device.
+
+ARM/arm64 divides the id field into two parts, a device id and an
+address type id specific to the individual device.
+
+  bits: | 63 ... 32 | 31 ... 16 | 15 ... 0 |
+ field: | 0x00000000 | device id | addr type id |
+
+ARM/arm64 currently only require this when using the in-kernel GIC
+support for the hardware VGIC features, using KVM_ARM_DEVICE_VGIC_V2
+as the device id. When setting the base address for the guest's
+mapping of the VGIC virtual CPU and distributor interface, the ioctl
+must be called after calling KVM_CREATE_IRQCHIP, but before calling
+KVM_RUN on any of the VCPUs. Calling this ioctl twice for any of the
+base addresses will return -EEXIST.
+
+Note, this IOCTL is deprecated and the more flexible SET/GET_DEVICE_ATTR API
+should be used instead.
+
+
+4.86 KVM_PPC_RTAS_DEFINE_TOKEN
+
+Capability: KVM_CAP_PPC_RTAS
+Architectures: ppc
+Type: vm ioctl
+Parameters: struct kvm_rtas_token_args
+Returns: 0 on success, -1 on error
+
+Defines a token value for a RTAS (Run Time Abstraction Services)
+service in order to allow it to be handled in the kernel. The
+argument struct gives the name of the service, which must be the name
+of a service that has a kernel-side implementation. If the token
+value is non-zero, it will be associated with that service, and
+subsequent RTAS calls by the guest specifying that token will be
+handled by the kernel. If the token value is 0, then any token
+associated with the service will be forgotten, and subsequent RTAS
+calls by the guest for that service will be passed to userspace to be
+handled.
+
+4.87 KVM_SET_GUEST_DEBUG
+
+Capability: KVM_CAP_SET_GUEST_DEBUG
+Architectures: x86, s390, ppc
+Type: vcpu ioctl
+Parameters: struct kvm_guest_debug (in)
+Returns: 0 on success; -1 on error
+
+struct kvm_guest_debug {
+ __u32 control;
+ __u32 pad;
+ struct kvm_guest_debug_arch arch;
+};
+
+Set up the processor specific debug registers and configure vcpu for
+handling guest debug events. There are two parts to the structure, the
+first a control bitfield indicates the type of debug events to handle
+when running. Common control bits are:
+
+ - KVM_GUESTDBG_ENABLE: guest debugging is enabled
+ - KVM_GUESTDBG_SINGLESTEP: the next run should single-step
+
+The top 16 bits of the control field are architecture specific control
+flags which can include the following:
+
+ - KVM_GUESTDBG_USE_SW_BP: using software breakpoints [x86]
+ - KVM_GUESTDBG_USE_HW_BP: using hardware breakpoints [x86, s390]
+ - KVM_GUESTDBG_INJECT_DB: inject DB type exception [x86]
+ - KVM_GUESTDBG_INJECT_BP: inject BP type exception [x86]
+ - KVM_GUESTDBG_EXIT_PENDING: trigger an immediate guest exit [s390]
+
+For example KVM_GUESTDBG_USE_SW_BP indicates that software breakpoints
+are enabled in memory so we need to ensure breakpoint exceptions are
+correctly trapped and the KVM run loop exits at the breakpoint and not
+running off into the normal guest vector. For KVM_GUESTDBG_USE_HW_BP
+we need to ensure the guest vCPUs architecture specific registers are
+updated to the correct (supplied) values.
+
+The second part of the structure is architecture specific and
+typically contains a set of debug registers.
+
+When debug events exit the main run loop with the reason
+KVM_EXIT_DEBUG with the kvm_debug_exit_arch part of the kvm_run
+structure containing architecture specific debug information.
+
+4.88 KVM_GET_EMULATED_CPUID
+
+Capability: KVM_CAP_EXT_EMUL_CPUID
+Architectures: x86
+Type: system ioctl
+Parameters: struct kvm_cpuid2 (in/out)
+Returns: 0 on success, -1 on error
+
+struct kvm_cpuid2 {
+ __u32 nent;
+ __u32 flags;
+ struct kvm_cpuid_entry2 entries[0];
+};
+
+The member 'flags' is used for passing flags from userspace.
+
+#define KVM_CPUID_FLAG_SIGNIFCANT_INDEX BIT(0)
+#define KVM_CPUID_FLAG_STATEFUL_FUNC BIT(1)
+#define KVM_CPUID_FLAG_STATE_READ_NEXT BIT(2)
+
+struct kvm_cpuid_entry2 {
+ __u32 function;
+ __u32 index;
+ __u32 flags;
+ __u32 eax;
+ __u32 ebx;
+ __u32 ecx;
+ __u32 edx;
+ __u32 padding[3];
+};
+
+This ioctl returns x86 cpuid features which are emulated by
+kvm.Userspace can use the information returned by this ioctl to query
+which features are emulated by kvm instead of being present natively.
+
+Userspace invokes KVM_GET_EMULATED_CPUID by passing a kvm_cpuid2
+structure with the 'nent' field indicating the number of entries in
+the variable-size array 'entries'. If the number of entries is too low
+to describe the cpu capabilities, an error (E2BIG) is returned. If the
+number is too high, the 'nent' field is adjusted and an error (ENOMEM)
+is returned. If the number is just right, the 'nent' field is adjusted
+to the number of valid entries in the 'entries' array, which is then
+filled.
+
+The entries returned are the set CPUID bits of the respective features
+which kvm emulates, as returned by the CPUID instruction, with unknown
+or unsupported feature bits cleared.
+
+Features like x2apic, for example, may not be present in the host cpu
+but are exposed by kvm in KVM_GET_SUPPORTED_CPUID because they can be
+emulated efficiently and thus not included here.
+
+The fields in each entry are defined as follows:
+
+ function: the eax value used to obtain the entry
+ index: the ecx value used to obtain the entry (for entries that are
+ affected by ecx)
+ flags: an OR of zero or more of the following:
+ KVM_CPUID_FLAG_SIGNIFCANT_INDEX:
+ if the index field is valid
+ KVM_CPUID_FLAG_STATEFUL_FUNC:
+ if cpuid for this function returns different values for successive
+ invocations; there will be several entries with the same function,
+ all with this flag set
+ KVM_CPUID_FLAG_STATE_READ_NEXT:
+ for KVM_CPUID_FLAG_STATEFUL_FUNC entries, set if this entry is
+ the first entry to be read by a cpu
+ eax, ebx, ecx, edx: the values returned by the cpuid instruction for
+ this function/index combination
+
+4.89 KVM_S390_MEM_OP
+
+Capability: KVM_CAP_S390_MEM_OP
+Architectures: s390
+Type: vcpu ioctl
+Parameters: struct kvm_s390_mem_op (in)
+Returns: = 0 on success,
+ < 0 on generic error (e.g. -EFAULT or -ENOMEM),
+ > 0 if an exception occurred while walking the page tables
+
+Read or write data from/to the logical (virtual) memory of a VPCU.
+
+Parameters are specified via the following structure:
+
+struct kvm_s390_mem_op {
+ __u64 gaddr; /* the guest address */
+ __u64 flags; /* flags */
+ __u32 size; /* amount of bytes */
+ __u32 op; /* type of operation */
+ __u64 buf; /* buffer in userspace */
+ __u8 ar; /* the access register number */
+ __u8 reserved[31]; /* should be set to 0 */
+};
+
+The type of operation is specified in the "op" field. It is either
+KVM_S390_MEMOP_LOGICAL_READ for reading from logical memory space or
+KVM_S390_MEMOP_LOGICAL_WRITE for writing to logical memory space. The
+KVM_S390_MEMOP_F_CHECK_ONLY flag can be set in the "flags" field to check
+whether the corresponding memory access would create an access exception
+(without touching the data in the memory at the destination). In case an
+access exception occurred while walking the MMU tables of the guest, the
+ioctl returns a positive error number to indicate the type of exception.
+This exception is also raised directly at the corresponding VCPU if the
+flag KVM_S390_MEMOP_F_INJECT_EXCEPTION is set in the "flags" field.
+
+The start address of the memory region has to be specified in the "gaddr"
+field, and the length of the region in the "size" field. "buf" is the buffer
+supplied by the userspace application where the read data should be written
+to for KVM_S390_MEMOP_LOGICAL_READ, or where the data that should be written
+is stored for a KVM_S390_MEMOP_LOGICAL_WRITE. "buf" is unused and can be NULL
+when KVM_S390_MEMOP_F_CHECK_ONLY is specified. "ar" designates the access
+register number to be used.
+
+The "reserved" field is meant for future extensions. It is not used by
+KVM with the currently defined set of flags.
+
+4.90 KVM_S390_GET_SKEYS
+
+Capability: KVM_CAP_S390_SKEYS
+Architectures: s390
+Type: vm ioctl
+Parameters: struct kvm_s390_skeys
+Returns: 0 on success, KVM_S390_GET_KEYS_NONE if guest is not using storage
+ keys, negative value on error
+
+This ioctl is used to get guest storage key values on the s390
+architecture. The ioctl takes parameters via the kvm_s390_skeys struct.
+
+struct kvm_s390_skeys {
+ __u64 start_gfn;
+ __u64 count;
+ __u64 skeydata_addr;
+ __u32 flags;
+ __u32 reserved[9];
+};
+
+The start_gfn field is the number of the first guest frame whose storage keys
+you want to get.
+
+The count field is the number of consecutive frames (starting from start_gfn)
+whose storage keys to get. The count field must be at least 1 and the maximum
+allowed value is defined as KVM_S390_SKEYS_ALLOC_MAX. Values outside this range
+will cause the ioctl to return -EINVAL.
+
+The skeydata_addr field is the address to a buffer large enough to hold count
+bytes. This buffer will be filled with storage key data by the ioctl.
+
+4.91 KVM_S390_SET_SKEYS
+
+Capability: KVM_CAP_S390_SKEYS
+Architectures: s390
+Type: vm ioctl
+Parameters: struct kvm_s390_skeys
+Returns: 0 on success, negative value on error
+
+This ioctl is used to set guest storage key values on the s390
+architecture. The ioctl takes parameters via the kvm_s390_skeys struct.
+See section on KVM_S390_GET_SKEYS for struct definition.
+
+The start_gfn field is the number of the first guest frame whose storage keys
+you want to set.
+
+The count field is the number of consecutive frames (starting from start_gfn)
+whose storage keys to get. The count field must be at least 1 and the maximum
+allowed value is defined as KVM_S390_SKEYS_ALLOC_MAX. Values outside this range
+will cause the ioctl to return -EINVAL.
+
+The skeydata_addr field is the address to a buffer containing count bytes of
+storage keys. Each byte in the buffer will be set as the storage key for a
+single frame starting at start_gfn for count frames.
+
+Note: If any architecturally invalid key value is found in the given data then
+the ioctl will return -EINVAL.
+
+4.92 KVM_S390_IRQ
+
+Capability: KVM_CAP_S390_INJECT_IRQ
+Architectures: s390
+Type: vcpu ioctl
+Parameters: struct kvm_s390_irq (in)
+Returns: 0 on success, -1 on error
+Errors:
+ EINVAL: interrupt type is invalid
+ type is KVM_S390_SIGP_STOP and flag parameter is invalid value
+ type is KVM_S390_INT_EXTERNAL_CALL and code is bigger
+ than the maximum of VCPUs
+ EBUSY: type is KVM_S390_SIGP_SET_PREFIX and vcpu is not stopped
+ type is KVM_S390_SIGP_STOP and a stop irq is already pending
+ type is KVM_S390_INT_EXTERNAL_CALL and an external call interrupt
+ is already pending
+
+Allows to inject an interrupt to the guest.
+
+Using struct kvm_s390_irq as a parameter allows
+to inject additional payload which is not
+possible via KVM_S390_INTERRUPT.
+
+Interrupt parameters are passed via kvm_s390_irq:
+
+struct kvm_s390_irq {
+ __u64 type;
+ union {
+ struct kvm_s390_io_info io;
+ struct kvm_s390_ext_info ext;
+ struct kvm_s390_pgm_info pgm;
+ struct kvm_s390_emerg_info emerg;
+ struct kvm_s390_extcall_info extcall;
+ struct kvm_s390_prefix_info prefix;
+ struct kvm_s390_stop_info stop;
+ struct kvm_s390_mchk_info mchk;
+ char reserved[64];
+ } u;
+};
+
+type can be one of the following:
+
+KVM_S390_SIGP_STOP - sigp stop; parameter in .stop
+KVM_S390_PROGRAM_INT - program check; parameters in .pgm
+KVM_S390_SIGP_SET_PREFIX - sigp set prefix; parameters in .prefix
+KVM_S390_RESTART - restart; no parameters
+KVM_S390_INT_CLOCK_COMP - clock comparator interrupt; no parameters
+KVM_S390_INT_CPU_TIMER - CPU timer interrupt; no parameters
+KVM_S390_INT_EMERGENCY - sigp emergency; parameters in .emerg
+KVM_S390_INT_EXTERNAL_CALL - sigp external call; parameters in .extcall
+KVM_S390_MCHK - machine check interrupt; parameters in .mchk
+
+
+Note that the vcpu ioctl is asynchronous to vcpu execution.
+
+4.94 KVM_S390_GET_IRQ_STATE
+
+Capability: KVM_CAP_S390_IRQ_STATE
+Architectures: s390
+Type: vcpu ioctl
+Parameters: struct kvm_s390_irq_state (out)
+Returns: >= number of bytes copied into buffer,
+ -EINVAL if buffer size is 0,
+ -ENOBUFS if buffer size is too small to fit all pending interrupts,
+ -EFAULT if the buffer address was invalid
+
+This ioctl allows userspace to retrieve the complete state of all currently
+pending interrupts in a single buffer. Use cases include migration
+and introspection. The parameter structure contains the address of a
+userspace buffer and its length:
+
+struct kvm_s390_irq_state {
+ __u64 buf;
+ __u32 flags;
+ __u32 len;
+ __u32 reserved[4];
+};
+
+Userspace passes in the above struct and for each pending interrupt a
+struct kvm_s390_irq is copied to the provided buffer.
+
+If -ENOBUFS is returned the buffer provided was too small and userspace
+may retry with a bigger buffer.
+
+4.95 KVM_S390_SET_IRQ_STATE
+
+Capability: KVM_CAP_S390_IRQ_STATE
+Architectures: s390
+Type: vcpu ioctl
+Parameters: struct kvm_s390_irq_state (in)
+Returns: 0 on success,
+ -EFAULT if the buffer address was invalid,
+ -EINVAL for an invalid buffer length (see below),
+ -EBUSY if there were already interrupts pending,
+ errors occurring when actually injecting the
+ interrupt. See KVM_S390_IRQ.
+
+This ioctl allows userspace to set the complete state of all cpu-local
+interrupts currently pending for the vcpu. It is intended for restoring
+interrupt state after a migration. The input parameter is a userspace buffer
+containing a struct kvm_s390_irq_state:
+
+struct kvm_s390_irq_state {
+ __u64 buf;
+ __u32 len;
+ __u32 pad;
+};
+
+The userspace memory referenced by buf contains a struct kvm_s390_irq
+for each interrupt to be injected into the guest.
+If one of the interrupts could not be injected for some reason the
+ioctl aborts.
+
+len must be a multiple of sizeof(struct kvm_s390_irq). It must be > 0
+and it must not exceed (max_vcpus + 32) * sizeof(struct kvm_s390_irq),
+which is the maximum number of possibly pending cpu-local interrupts.
+
+5. The kvm_run structure
+------------------------
+
+Application code obtains a pointer to the kvm_run structure by
+mmap()ing a vcpu fd. From that point, application code can control
+execution by changing fields in kvm_run prior to calling the KVM_RUN
+ioctl, and obtain information about the reason KVM_RUN returned by
+looking up structure members.
+
+struct kvm_run {
+ /* in */
+ __u8 request_interrupt_window;
+
+Request that KVM_RUN return when it becomes possible to inject external
+interrupts into the guest. Useful in conjunction with KVM_INTERRUPT.
+
+ __u8 padding1[7];
+
+ /* out */
+ __u32 exit_reason;
+
+When KVM_RUN has returned successfully (return value 0), this informs
+application code why KVM_RUN has returned. Allowable values for this
+field are detailed below.
+
+ __u8 ready_for_interrupt_injection;
+
+If request_interrupt_window has been specified, this field indicates
+an interrupt can be injected now with KVM_INTERRUPT.
+
+ __u8 if_flag;
+
+The value of the current interrupt flag. Only valid if in-kernel
+local APIC is not used.
+
+ __u8 padding2[2];
+
+ /* in (pre_kvm_run), out (post_kvm_run) */
+ __u64 cr8;
+
+The value of the cr8 register. Only valid if in-kernel local APIC is
+not used. Both input and output.
+
+ __u64 apic_base;
+
+The value of the APIC BASE msr. Only valid if in-kernel local
+APIC is not used. Both input and output.
+
+ union {
+ /* KVM_EXIT_UNKNOWN */
+ struct {
+ __u64 hardware_exit_reason;
+ } hw;
+
+If exit_reason is KVM_EXIT_UNKNOWN, the vcpu has exited due to unknown
+reasons. Further architecture-specific information is available in
+hardware_exit_reason.
+
+ /* KVM_EXIT_FAIL_ENTRY */
+ struct {
+ __u64 hardware_entry_failure_reason;
+ } fail_entry;
+
+If exit_reason is KVM_EXIT_FAIL_ENTRY, the vcpu could not be run due
+to unknown reasons. Further architecture-specific information is
+available in hardware_entry_failure_reason.
+
+ /* KVM_EXIT_EXCEPTION */
+ struct {
+ __u32 exception;
+ __u32 error_code;
+ } ex;
+
+Unused.
+
+ /* KVM_EXIT_IO */
+ struct {
+#define KVM_EXIT_IO_IN 0
+#define KVM_EXIT_IO_OUT 1
+ __u8 direction;
+ __u8 size; /* bytes */
+ __u16 port;
+ __u32 count;
+ __u64 data_offset; /* relative to kvm_run start */
+ } io;
+
+If exit_reason is KVM_EXIT_IO, then the vcpu has
+executed a port I/O instruction which could not be satisfied by kvm.
+data_offset describes where the data is located (KVM_EXIT_IO_OUT) or
+where kvm expects application code to place the data for the next
+KVM_RUN invocation (KVM_EXIT_IO_IN). Data format is a packed array.
+
+ struct {
+ struct kvm_debug_exit_arch arch;
+ } debug;
+
+Unused.
+
+ /* KVM_EXIT_MMIO */
+ struct {
+ __u64 phys_addr;
+ __u8 data[8];
+ __u32 len;
+ __u8 is_write;
+ } mmio;
+
+If exit_reason is KVM_EXIT_MMIO, then the vcpu has
+executed a memory-mapped I/O instruction which could not be satisfied
+by kvm. The 'data' member contains the written data if 'is_write' is
+true, and should be filled by application code otherwise.
+
+The 'data' member contains, in its first 'len' bytes, the value as it would
+appear if the VCPU performed a load or store of the appropriate width directly
+to the byte array.
+
+NOTE: For KVM_EXIT_IO, KVM_EXIT_MMIO, KVM_EXIT_OSI, KVM_EXIT_PAPR and
+ KVM_EXIT_EPR the corresponding
+operations are complete (and guest state is consistent) only after userspace
+has re-entered the kernel with KVM_RUN. The kernel side will first finish
+incomplete operations and then check for pending signals. Userspace
+can re-enter the guest with an unmasked signal pending to complete
+pending operations.
+
+ /* KVM_EXIT_HYPERCALL */
+ struct {
+ __u64 nr;
+ __u64 args[6];
+ __u64 ret;
+ __u32 longmode;
+ __u32 pad;
+ } hypercall;
+
+Unused. This was once used for 'hypercall to userspace'. To implement
+such functionality, use KVM_EXIT_IO (x86) or KVM_EXIT_MMIO (all except s390).
+Note KVM_EXIT_IO is significantly faster than KVM_EXIT_MMIO.
+
+ /* KVM_EXIT_TPR_ACCESS */
+ struct {
+ __u64 rip;
+ __u32 is_write;
+ __u32 pad;
+ } tpr_access;
+
+To be documented (KVM_TPR_ACCESS_REPORTING).
+
+ /* KVM_EXIT_S390_SIEIC */
+ struct {
+ __u8 icptcode;
+ __u64 mask; /* psw upper half */
+ __u64 addr; /* psw lower half */
+ __u16 ipa;
+ __u32 ipb;
+ } s390_sieic;
+
+s390 specific.
+
+ /* KVM_EXIT_S390_RESET */
+#define KVM_S390_RESET_POR 1
+#define KVM_S390_RESET_CLEAR 2
+#define KVM_S390_RESET_SUBSYSTEM 4
+#define KVM_S390_RESET_CPU_INIT 8
+#define KVM_S390_RESET_IPL 16
+ __u64 s390_reset_flags;
+
+s390 specific.
+
+ /* KVM_EXIT_S390_UCONTROL */
+ struct {
+ __u64 trans_exc_code;
+ __u32 pgm_code;
+ } s390_ucontrol;
+
+s390 specific. A page fault has occurred for a user controlled virtual
+machine (KVM_VM_S390_UNCONTROL) on it's host page table that cannot be
+resolved by the kernel.
+The program code and the translation exception code that were placed
+in the cpu's lowcore are presented here as defined by the z Architecture
+Principles of Operation Book in the Chapter for Dynamic Address Translation
+(DAT)
+
+ /* KVM_EXIT_DCR */
+ struct {
+ __u32 dcrn;
+ __u32 data;
+ __u8 is_write;
+ } dcr;
+
+Deprecated - was used for 440 KVM.
+
+ /* KVM_EXIT_OSI */
+ struct {
+ __u64 gprs[32];
+ } osi;
+
+MOL uses a special hypercall interface it calls 'OSI'. To enable it, we catch
+hypercalls and exit with this exit struct that contains all the guest gprs.
+
+If exit_reason is KVM_EXIT_OSI, then the vcpu has triggered such a hypercall.
+Userspace can now handle the hypercall and when it's done modify the gprs as
+necessary. Upon guest entry all guest GPRs will then be replaced by the values
+in this struct.
+
+ /* KVM_EXIT_PAPR_HCALL */
+ struct {
+ __u64 nr;
+ __u64 ret;
+ __u64 args[9];
+ } papr_hcall;
+
+This is used on 64-bit PowerPC when emulating a pSeries partition,
+e.g. with the 'pseries' machine type in qemu. It occurs when the
+guest does a hypercall using the 'sc 1' instruction. The 'nr' field
+contains the hypercall number (from the guest R3), and 'args' contains
+the arguments (from the guest R4 - R12). Userspace should put the
+return code in 'ret' and any extra returned values in args[].
+The possible hypercalls are defined in the Power Architecture Platform
+Requirements (PAPR) document available from www.power.org (free
+developer registration required to access it).
+
+ /* KVM_EXIT_S390_TSCH */
+ struct {
+ __u16 subchannel_id;
+ __u16 subchannel_nr;
+ __u32 io_int_parm;
+ __u32 io_int_word;
+ __u32 ipb;
+ __u8 dequeued;
+ } s390_tsch;
+
+s390 specific. This exit occurs when KVM_CAP_S390_CSS_SUPPORT has been enabled
+and TEST SUBCHANNEL was intercepted. If dequeued is set, a pending I/O
+interrupt for the target subchannel has been dequeued and subchannel_id,
+subchannel_nr, io_int_parm and io_int_word contain the parameters for that
+interrupt. ipb is needed for instruction parameter decoding.
+
+ /* KVM_EXIT_EPR */
+ struct {
+ __u32 epr;
+ } epr;
+
+On FSL BookE PowerPC chips, the interrupt controller has a fast patch
+interrupt acknowledge path to the core. When the core successfully
+delivers an interrupt, it automatically populates the EPR register with
+the interrupt vector number and acknowledges the interrupt inside
+the interrupt controller.
+
+In case the interrupt controller lives in user space, we need to do
+the interrupt acknowledge cycle through it to fetch the next to be
+delivered interrupt vector using this exit.
+
+It gets triggered whenever both KVM_CAP_PPC_EPR are enabled and an
+external interrupt has just been delivered into the guest. User space
+should put the acknowledged interrupt vector into the 'epr' field.
+
+ /* KVM_EXIT_SYSTEM_EVENT */
+ struct {
+#define KVM_SYSTEM_EVENT_SHUTDOWN 1
+#define KVM_SYSTEM_EVENT_RESET 2
+ __u32 type;
+ __u64 flags;
+ } system_event;
+
+If exit_reason is KVM_EXIT_SYSTEM_EVENT then the vcpu has triggered
+a system-level event using some architecture specific mechanism (hypercall
+or some special instruction). In case of ARM/ARM64, this is triggered using
+HVC instruction based PSCI call from the vcpu. The 'type' field describes
+the system-level event type. The 'flags' field describes architecture
+specific flags for the system-level event.
+
+Valid values for 'type' are:
+ KVM_SYSTEM_EVENT_SHUTDOWN -- the guest has requested a shutdown of the
+ VM. Userspace is not obliged to honour this, and if it does honour
+ this does not need to destroy the VM synchronously (ie it may call
+ KVM_RUN again before shutdown finally occurs).
+ KVM_SYSTEM_EVENT_RESET -- the guest has requested a reset of the VM.
+ As with SHUTDOWN, userspace can choose to ignore the request, or
+ to schedule the reset to occur in the future and may call KVM_RUN again.
+
+ /* Fix the size of the union. */
+ char padding[256];
+ };
+
+ /*
+ * shared registers between kvm and userspace.
+ * kvm_valid_regs specifies the register classes set by the host
+ * kvm_dirty_regs specified the register classes dirtied by userspace
+ * struct kvm_sync_regs is architecture specific, as well as the
+ * bits for kvm_valid_regs and kvm_dirty_regs
+ */
+ __u64 kvm_valid_regs;
+ __u64 kvm_dirty_regs;
+ union {
+ struct kvm_sync_regs regs;
+ char padding[1024];
+ } s;
+
+If KVM_CAP_SYNC_REGS is defined, these fields allow userspace to access
+certain guest registers without having to call SET/GET_*REGS. Thus we can
+avoid some system call overhead if userspace has to handle the exit.
+Userspace can query the validity of the structure by checking
+kvm_valid_regs for specific bits. These bits are architecture specific
+and usually define the validity of a groups of registers. (e.g. one bit
+ for general purpose registers)
+
+Please note that the kernel is allowed to use the kvm_run structure as the
+primary storage for certain register types. Therefore, the kernel may use the
+values in kvm_run even if the corresponding bit in kvm_dirty_regs is not set.
+
+};
+
+
+
+6. Capabilities that can be enabled on vCPUs
+--------------------------------------------
+
+There are certain capabilities that change the behavior of the virtual CPU or
+the virtual machine when enabled. To enable them, please see section 4.37.
+Below you can find a list of capabilities and what their effect on the vCPU or
+the virtual machine is when enabling them.
+
+The following information is provided along with the description:
+
+ Architectures: which instruction set architectures provide this ioctl.
+ x86 includes both i386 and x86_64.
+
+ Target: whether this is a per-vcpu or per-vm capability.
+
+ Parameters: what parameters are accepted by the capability.
+
+ Returns: the return value. General error numbers (EBADF, ENOMEM, EINVAL)
+ are not detailed, but errors with specific meanings are.
+
+
+6.1 KVM_CAP_PPC_OSI
+
+Architectures: ppc
+Target: vcpu
+Parameters: none
+Returns: 0 on success; -1 on error
+
+This capability enables interception of OSI hypercalls that otherwise would
+be treated as normal system calls to be injected into the guest. OSI hypercalls
+were invented by Mac-on-Linux to have a standardized communication mechanism
+between the guest and the host.
+
+When this capability is enabled, KVM_EXIT_OSI can occur.
+
+
+6.2 KVM_CAP_PPC_PAPR
+
+Architectures: ppc
+Target: vcpu
+Parameters: none
+Returns: 0 on success; -1 on error
+
+This capability enables interception of PAPR hypercalls. PAPR hypercalls are
+done using the hypercall instruction "sc 1".
+
+It also sets the guest privilege level to "supervisor" mode. Usually the guest
+runs in "hypervisor" privilege mode with a few missing features.
+
+In addition to the above, it changes the semantics of SDR1. In this mode, the
+HTAB address part of SDR1 contains an HVA instead of a GPA, as PAPR keeps the
+HTAB invisible to the guest.
+
+When this capability is enabled, KVM_EXIT_PAPR_HCALL can occur.
+
+
+6.3 KVM_CAP_SW_TLB
+
+Architectures: ppc
+Target: vcpu
+Parameters: args[0] is the address of a struct kvm_config_tlb
+Returns: 0 on success; -1 on error
+
+struct kvm_config_tlb {
+ __u64 params;
+ __u64 array;
+ __u32 mmu_type;
+ __u32 array_len;
+};
+
+Configures the virtual CPU's TLB array, establishing a shared memory area
+between userspace and KVM. The "params" and "array" fields are userspace
+addresses of mmu-type-specific data structures. The "array_len" field is an
+safety mechanism, and should be set to the size in bytes of the memory that
+userspace has reserved for the array. It must be at least the size dictated
+by "mmu_type" and "params".
+
+While KVM_RUN is active, the shared region is under control of KVM. Its
+contents are undefined, and any modification by userspace results in
+boundedly undefined behavior.
+
+On return from KVM_RUN, the shared region will reflect the current state of
+the guest's TLB. If userspace makes any changes, it must call KVM_DIRTY_TLB
+to tell KVM which entries have been changed, prior to calling KVM_RUN again
+on this vcpu.
+
+For mmu types KVM_MMU_FSL_BOOKE_NOHV and KVM_MMU_FSL_BOOKE_HV:
+ - The "params" field is of type "struct kvm_book3e_206_tlb_params".
+ - The "array" field points to an array of type "struct
+ kvm_book3e_206_tlb_entry".
+ - The array consists of all entries in the first TLB, followed by all
+ entries in the second TLB.
+ - Within a TLB, entries are ordered first by increasing set number. Within a
+ set, entries are ordered by way (increasing ESEL).
+ - The hash for determining set number in TLB0 is: (MAS2 >> 12) & (num_sets - 1)
+ where "num_sets" is the tlb_sizes[] value divided by the tlb_ways[] value.
+ - The tsize field of mas1 shall be set to 4K on TLB0, even though the
+ hardware ignores this value for TLB0.
+
+6.4 KVM_CAP_S390_CSS_SUPPORT
+
+Architectures: s390
+Target: vcpu
+Parameters: none
+Returns: 0 on success; -1 on error
+
+This capability enables support for handling of channel I/O instructions.
+
+TEST PENDING INTERRUPTION and the interrupt portion of TEST SUBCHANNEL are
+handled in-kernel, while the other I/O instructions are passed to userspace.
+
+When this capability is enabled, KVM_EXIT_S390_TSCH will occur on TEST
+SUBCHANNEL intercepts.
+
+Note that even though this capability is enabled per-vcpu, the complete
+virtual machine is affected.
+
+6.5 KVM_CAP_PPC_EPR
+
+Architectures: ppc
+Target: vcpu
+Parameters: args[0] defines whether the proxy facility is active
+Returns: 0 on success; -1 on error
+
+This capability enables or disables the delivery of interrupts through the
+external proxy facility.
+
+When enabled (args[0] != 0), every time the guest gets an external interrupt
+delivered, it automatically exits into user space with a KVM_EXIT_EPR exit
+to receive the topmost interrupt vector.
+
+When disabled (args[0] == 0), behavior is as if this facility is unsupported.
+
+When this capability is enabled, KVM_EXIT_EPR can occur.
+
+6.6 KVM_CAP_IRQ_MPIC
+
+Architectures: ppc
+Parameters: args[0] is the MPIC device fd
+ args[1] is the MPIC CPU number for this vcpu
+
+This capability connects the vcpu to an in-kernel MPIC device.
+
+6.7 KVM_CAP_IRQ_XICS
+
+Architectures: ppc
+Target: vcpu
+Parameters: args[0] is the XICS device fd
+ args[1] is the XICS CPU number (server ID) for this vcpu
+
+This capability connects the vcpu to an in-kernel XICS device.
+
+6.8 KVM_CAP_S390_IRQCHIP
+
+Architectures: s390
+Target: vm
+Parameters: none
+
+This capability enables the in-kernel irqchip for s390. Please refer to
+"4.24 KVM_CREATE_IRQCHIP" for details.
+
+6.9 KVM_CAP_MIPS_FPU
+
+Architectures: mips
+Target: vcpu
+Parameters: args[0] is reserved for future use (should be 0).
+
+This capability allows the use of the host Floating Point Unit by the guest. It
+allows the Config1.FP bit to be set to enable the FPU in the guest. Once this is
+done the KVM_REG_MIPS_FPR_* and KVM_REG_MIPS_FCR_* registers can be accessed
+(depending on the current guest FPU register mode), and the Status.FR,
+Config5.FRE bits are accessible via the KVM API and also from the guest,
+depending on them being supported by the FPU.
+
+6.10 KVM_CAP_MIPS_MSA
+
+Architectures: mips
+Target: vcpu
+Parameters: args[0] is reserved for future use (should be 0).
+
+This capability allows the use of the MIPS SIMD Architecture (MSA) by the guest.
+It allows the Config3.MSAP bit to be set to enable the use of MSA by the guest.
+Once this is done the KVM_REG_MIPS_VEC_* and KVM_REG_MIPS_MSA_* registers can be
+accessed, and the Config5.MSAEn bit is accessible via the KVM API and also from
+the guest.
+
+7. Capabilities that can be enabled on VMs
+------------------------------------------
+
+There are certain capabilities that change the behavior of the virtual
+machine when enabled. To enable them, please see section 4.37. Below
+you can find a list of capabilities and what their effect on the VM
+is when enabling them.
+
+The following information is provided along with the description:
+
+ Architectures: which instruction set architectures provide this ioctl.
+ x86 includes both i386 and x86_64.
+
+ Parameters: what parameters are accepted by the capability.
+
+ Returns: the return value. General error numbers (EBADF, ENOMEM, EINVAL)
+ are not detailed, but errors with specific meanings are.
+
+
+7.1 KVM_CAP_PPC_ENABLE_HCALL
+
+Architectures: ppc
+Parameters: args[0] is the sPAPR hcall number
+ args[1] is 0 to disable, 1 to enable in-kernel handling
+
+This capability controls whether individual sPAPR hypercalls (hcalls)
+get handled by the kernel or not. Enabling or disabling in-kernel
+handling of an hcall is effective across the VM. On creation, an
+initial set of hcalls are enabled for in-kernel handling, which
+consists of those hcalls for which in-kernel handlers were implemented
+before this capability was implemented. If disabled, the kernel will
+not to attempt to handle the hcall, but will always exit to userspace
+to handle it. Note that it may not make sense to enable some and
+disable others of a group of related hcalls, but KVM does not prevent
+userspace from doing that.
+
+If the hcall number specified is not one that has an in-kernel
+implementation, the KVM_ENABLE_CAP ioctl will fail with an EINVAL
+error.
+
+7.2 KVM_CAP_S390_USER_SIGP
+
+Architectures: s390
+Parameters: none
+
+This capability controls which SIGP orders will be handled completely in user
+space. With this capability enabled, all fast orders will be handled completely
+in the kernel:
+- SENSE
+- SENSE RUNNING
+- EXTERNAL CALL
+- EMERGENCY SIGNAL
+- CONDITIONAL EMERGENCY SIGNAL
+
+All other orders will be handled completely in user space.
+
+Only privileged operation exceptions will be checked for in the kernel (or even
+in the hardware prior to interception). If this capability is not enabled, the
+old way of handling SIGP orders is used (partially in kernel and user space).
+
+7.3 KVM_CAP_S390_VECTOR_REGISTERS
+
+Architectures: s390
+Parameters: none
+Returns: 0 on success, negative value on error
+
+Allows use of the vector registers introduced with z13 processor, and
+provides for the synchronization between host and user space. Will
+return -EINVAL if the machine does not support vectors.
+
+7.4 KVM_CAP_S390_USER_STSI
+
+Architectures: s390
+Parameters: none
+
+This capability allows post-handlers for the STSI instruction. After
+initial handling in the kernel, KVM exits to user space with
+KVM_EXIT_S390_STSI to allow user space to insert further data.
+
+Before exiting to userspace, kvm handlers should fill in s390_stsi field of
+vcpu->run:
+struct {
+ __u64 addr;
+ __u8 ar;
+ __u8 reserved;
+ __u8 fc;
+ __u8 sel1;
+ __u16 sel2;
+} s390_stsi;
+
+@addr - guest address of STSI SYSIB
+@fc - function code
+@sel1 - selector 1
+@sel2 - selector 2
+@ar - access register number
+
+KVM handlers should exit to userspace with rc = -EREMOTE.
+
+
+8. Other capabilities.
+----------------------
+
+This section lists capabilities that give information about other
+features of the KVM implementation.
+
+8.1 KVM_CAP_PPC_HWRNG
+
+Architectures: ppc
+
+This capability, if KVM_CHECK_EXTENSION indicates that it is
+available, means that that the kernel has an implementation of the
+H_RANDOM hypercall backed by a hardware random-number generator.
+If present, the kernel H_RANDOM handler can be enabled for guest use
+with the KVM_CAP_PPC_ENABLE_HCALL capability.
diff --git a/kernel/Documentation/virtual/kvm/cpuid.txt b/kernel/Documentation/virtual/kvm/cpuid.txt
new file mode 100644
index 000000000..3c65feb83
--- /dev/null
+++ b/kernel/Documentation/virtual/kvm/cpuid.txt
@@ -0,0 +1,60 @@
+KVM CPUID bits
+Glauber Costa <glommer@redhat.com>, Red Hat Inc, 2010
+=====================================================
+
+A guest running on a kvm host, can check some of its features using
+cpuid. This is not always guaranteed to work, since userspace can
+mask-out some, or even all KVM-related cpuid features before launching
+a guest.
+
+KVM cpuid functions are:
+
+function: KVM_CPUID_SIGNATURE (0x40000000)
+returns : eax = 0x40000001,
+ ebx = 0x4b4d564b,
+ ecx = 0x564b4d56,
+ edx = 0x4d.
+Note that this value in ebx, ecx and edx corresponds to the string "KVMKVMKVM".
+The value in eax corresponds to the maximum cpuid function present in this leaf,
+and will be updated if more functions are added in the future.
+Note also that old hosts set eax value to 0x0. This should
+be interpreted as if the value was 0x40000001.
+This function queries the presence of KVM cpuid leafs.
+
+
+function: define KVM_CPUID_FEATURES (0x40000001)
+returns : ebx, ecx, edx = 0
+ eax = and OR'ed group of (1 << flag), where each flags is:
+
+
+flag || value || meaning
+=============================================================================
+KVM_FEATURE_CLOCKSOURCE || 0 || kvmclock available at msrs
+ || || 0x11 and 0x12.
+------------------------------------------------------------------------------
+KVM_FEATURE_NOP_IO_DELAY || 1 || not necessary to perform delays
+ || || on PIO operations.
+------------------------------------------------------------------------------
+KVM_FEATURE_MMU_OP || 2 || deprecated.
+------------------------------------------------------------------------------
+KVM_FEATURE_CLOCKSOURCE2 || 3 || kvmclock available at msrs
+ || || 0x4b564d00 and 0x4b564d01
+------------------------------------------------------------------------------
+KVM_FEATURE_ASYNC_PF || 4 || async pf can be enabled by
+ || || writing to msr 0x4b564d02
+------------------------------------------------------------------------------
+KVM_FEATURE_STEAL_TIME || 5 || steal time can be enabled by
+ || || writing to msr 0x4b564d03.
+------------------------------------------------------------------------------
+KVM_FEATURE_PV_EOI || 6 || paravirtualized end of interrupt
+ || || handler can be enabled by writing
+ || || to msr 0x4b564d04.
+------------------------------------------------------------------------------
+KVM_FEATURE_PV_UNHALT || 7 || guest checks this feature bit
+ || || before enabling paravirtualized
+ || || spinlock support.
+------------------------------------------------------------------------------
+KVM_FEATURE_CLOCKSOURCE_STABLE_BIT || 24 || host will warn if no guest-side
+ || || per-cpu warps are expected in
+ || || kvmclock.
+------------------------------------------------------------------------------
diff --git a/kernel/Documentation/virtual/kvm/devices/README b/kernel/Documentation/virtual/kvm/devices/README
new file mode 100644
index 000000000..34a698341
--- /dev/null
+++ b/kernel/Documentation/virtual/kvm/devices/README
@@ -0,0 +1 @@
+This directory contains specific device bindings for KVM_CAP_DEVICE_CTRL.
diff --git a/kernel/Documentation/virtual/kvm/devices/arm-vgic.txt b/kernel/Documentation/virtual/kvm/devices/arm-vgic.txt
new file mode 100644
index 000000000..3fb905429
--- /dev/null
+++ b/kernel/Documentation/virtual/kvm/devices/arm-vgic.txt
@@ -0,0 +1,116 @@
+ARM Virtual Generic Interrupt Controller (VGIC)
+===============================================
+
+Device types supported:
+ KVM_DEV_TYPE_ARM_VGIC_V2 ARM Generic Interrupt Controller v2.0
+ KVM_DEV_TYPE_ARM_VGIC_V3 ARM Generic Interrupt Controller v3.0
+
+Only one VGIC instance may be instantiated through either this API or the
+legacy KVM_CREATE_IRQCHIP api. The created VGIC will act as the VM interrupt
+controller, requiring emulated user-space devices to inject interrupts to the
+VGIC instead of directly to CPUs.
+
+Creating a guest GICv3 device requires a host GICv3 as well.
+GICv3 implementations with hardware compatibility support allow a guest GICv2
+as well.
+
+Groups:
+ KVM_DEV_ARM_VGIC_GRP_ADDR
+ Attributes:
+ KVM_VGIC_V2_ADDR_TYPE_DIST (rw, 64-bit)
+ Base address in the guest physical address space of the GIC distributor
+ register mappings. Only valid for KVM_DEV_TYPE_ARM_VGIC_V2.
+ This address needs to be 4K aligned and the region covers 4 KByte.
+
+ KVM_VGIC_V2_ADDR_TYPE_CPU (rw, 64-bit)
+ Base address in the guest physical address space of the GIC virtual cpu
+ interface register mappings. Only valid for KVM_DEV_TYPE_ARM_VGIC_V2.
+ This address needs to be 4K aligned and the region covers 4 KByte.
+
+ KVM_VGIC_V3_ADDR_TYPE_DIST (rw, 64-bit)
+ Base address in the guest physical address space of the GICv3 distributor
+ register mappings. Only valid for KVM_DEV_TYPE_ARM_VGIC_V3.
+ This address needs to be 64K aligned and the region covers 64 KByte.
+
+ KVM_VGIC_V3_ADDR_TYPE_REDIST (rw, 64-bit)
+ Base address in the guest physical address space of the GICv3
+ redistributor register mappings. There are two 64K pages for each
+ VCPU and all of the redistributor pages are contiguous.
+ Only valid for KVM_DEV_TYPE_ARM_VGIC_V3.
+ This address needs to be 64K aligned.
+
+
+ KVM_DEV_ARM_VGIC_GRP_DIST_REGS
+ Attributes:
+ The attr field of kvm_device_attr encodes two values:
+ bits: | 63 .... 40 | 39 .. 32 | 31 .... 0 |
+ values: | reserved | cpu id | offset |
+
+ All distributor regs are (rw, 32-bit)
+
+ The offset is relative to the "Distributor base address" as defined in the
+ GICv2 specs. Getting or setting such a register has the same effect as
+ reading or writing the register on the actual hardware from the cpu
+ specified with cpu id field. Note that most distributor fields are not
+ banked, but return the same value regardless of the cpu id used to access
+ the register.
+ Limitations:
+ - Priorities are not implemented, and registers are RAZ/WI
+ - Currently only implemented for KVM_DEV_TYPE_ARM_VGIC_V2.
+ Errors:
+ -ENODEV: Getting or setting this register is not yet supported
+ -EBUSY: One or more VCPUs are running
+
+ KVM_DEV_ARM_VGIC_GRP_CPU_REGS
+ Attributes:
+ The attr field of kvm_device_attr encodes two values:
+ bits: | 63 .... 40 | 39 .. 32 | 31 .... 0 |
+ values: | reserved | cpu id | offset |
+
+ All CPU interface regs are (rw, 32-bit)
+
+ The offset specifies the offset from the "CPU interface base address" as
+ defined in the GICv2 specs. Getting or setting such a register has the
+ same effect as reading or writing the register on the actual hardware.
+
+ The Active Priorities Registers APRn are implementation defined, so we set a
+ fixed format for our implementation that fits with the model of a "GICv2
+ implementation without the security extensions" which we present to the
+ guest. This interface always exposes four register APR[0-3] describing the
+ maximum possible 128 preemption levels. The semantics of the register
+ indicate if any interrupts in a given preemption level are in the active
+ state by setting the corresponding bit.
+
+ Thus, preemption level X has one or more active interrupts if and only if:
+
+ APRn[X mod 32] == 0b1, where n = X / 32
+
+ Bits for undefined preemption levels are RAZ/WI.
+
+ Limitations:
+ - Priorities are not implemented, and registers are RAZ/WI
+ - Currently only implemented for KVM_DEV_TYPE_ARM_VGIC_V2.
+ Errors:
+ -ENODEV: Getting or setting this register is not yet supported
+ -EBUSY: One or more VCPUs are running
+
+ KVM_DEV_ARM_VGIC_GRP_NR_IRQS
+ Attributes:
+ A value describing the number of interrupts (SGI, PPI and SPI) for
+ this GIC instance, ranging from 64 to 1024, in increments of 32.
+
+ Errors:
+ -EINVAL: Value set is out of the expected range
+ -EBUSY: Value has already be set, or GIC has already been initialized
+ with default values.
+
+ KVM_DEV_ARM_VGIC_GRP_CTRL
+ Attributes:
+ KVM_DEV_ARM_VGIC_CTRL_INIT
+ request the initialization of the VGIC, no additional parameter in
+ kvm_device_attr.addr.
+ Errors:
+ -ENXIO: VGIC not properly configured as required prior to calling
+ this attribute
+ -ENODEV: no online VCPU
+ -ENOMEM: memory shortage when allocating vgic internal data
diff --git a/kernel/Documentation/virtual/kvm/devices/mpic.txt b/kernel/Documentation/virtual/kvm/devices/mpic.txt
new file mode 100644
index 000000000..8257397ad
--- /dev/null
+++ b/kernel/Documentation/virtual/kvm/devices/mpic.txt
@@ -0,0 +1,53 @@
+MPIC interrupt controller
+=========================
+
+Device types supported:
+ KVM_DEV_TYPE_FSL_MPIC_20 Freescale MPIC v2.0
+ KVM_DEV_TYPE_FSL_MPIC_42 Freescale MPIC v4.2
+
+Only one MPIC instance, of any type, may be instantiated. The created
+MPIC will act as the system interrupt controller, connecting to each
+vcpu's interrupt inputs.
+
+Groups:
+ KVM_DEV_MPIC_GRP_MISC
+ Attributes:
+ KVM_DEV_MPIC_BASE_ADDR (rw, 64-bit)
+ Base address of the 256 KiB MPIC register space. Must be
+ naturally aligned. A value of zero disables the mapping.
+ Reset value is zero.
+
+ KVM_DEV_MPIC_GRP_REGISTER (rw, 32-bit)
+ Access an MPIC register, as if the access were made from the guest.
+ "attr" is the byte offset into the MPIC register space. Accesses
+ must be 4-byte aligned.
+
+ MSIs may be signaled by using this attribute group to write
+ to the relevant MSIIR.
+
+ KVM_DEV_MPIC_GRP_IRQ_ACTIVE (rw, 32-bit)
+ IRQ input line for each standard openpic source. 0 is inactive and 1
+ is active, regardless of interrupt sense.
+
+ For edge-triggered interrupts: Writing 1 is considered an activating
+ edge, and writing 0 is ignored. Reading returns 1 if a previously
+ signaled edge has not been acknowledged, and 0 otherwise.
+
+ "attr" is the IRQ number. IRQ numbers for standard sources are the
+ byte offset of the relevant IVPR from EIVPR0, divided by 32.
+
+IRQ Routing:
+
+ The MPIC emulation supports IRQ routing. Only a single MPIC device can
+ be instantiated. Once that device has been created, it's available as
+ irqchip id 0.
+
+ This irqchip 0 has 256 interrupt pins, which expose the interrupts in
+ the main array of interrupt sources (a.k.a. "SRC" interrupts).
+
+ The numbering is the same as the MPIC device tree binding -- based on
+ the register offset from the beginning of the sources array, without
+ regard to any subdivisions in chip documentation such as "internal"
+ or "external" interrupts.
+
+ Access to non-SRC interrupts is not implemented through IRQ routing mechanisms.
diff --git a/kernel/Documentation/virtual/kvm/devices/s390_flic.txt b/kernel/Documentation/virtual/kvm/devices/s390_flic.txt
new file mode 100644
index 000000000..d1ad9d5ca
--- /dev/null
+++ b/kernel/Documentation/virtual/kvm/devices/s390_flic.txt
@@ -0,0 +1,94 @@
+FLIC (floating interrupt controller)
+====================================
+
+FLIC handles floating (non per-cpu) interrupts, i.e. I/O, service and some
+machine check interruptions. All interrupts are stored in a per-vm list of
+pending interrupts. FLIC performs operations on this list.
+
+Only one FLIC instance may be instantiated.
+
+FLIC provides support to
+- add interrupts (KVM_DEV_FLIC_ENQUEUE)
+- inspect currently pending interrupts (KVM_FLIC_GET_ALL_IRQS)
+- purge all pending floating interrupts (KVM_DEV_FLIC_CLEAR_IRQS)
+- enable/disable for the guest transparent async page faults
+- register and modify adapter interrupt sources (KVM_DEV_FLIC_ADAPTER_*)
+
+Groups:
+ KVM_DEV_FLIC_ENQUEUE
+ Passes a buffer and length into the kernel which are then injected into
+ the list of pending interrupts.
+ attr->addr contains the pointer to the buffer and attr->attr contains
+ the length of the buffer.
+ The format of the data structure kvm_s390_irq as it is copied from userspace
+ is defined in usr/include/linux/kvm.h.
+
+ KVM_DEV_FLIC_GET_ALL_IRQS
+ Copies all floating interrupts into a buffer provided by userspace.
+ When the buffer is too small it returns -ENOMEM, which is the indication
+ for userspace to try again with a bigger buffer.
+ -ENOBUFS is returned when the allocation of a kernelspace buffer has
+ failed.
+ -EFAULT is returned when copying data to userspace failed.
+ All interrupts remain pending, i.e. are not deleted from the list of
+ currently pending interrupts.
+ attr->addr contains the userspace address of the buffer into which all
+ interrupt data will be copied.
+ attr->attr contains the size of the buffer in bytes.
+
+ KVM_DEV_FLIC_CLEAR_IRQS
+ Simply deletes all elements from the list of currently pending floating
+ interrupts. No interrupts are injected into the guest.
+
+ KVM_DEV_FLIC_APF_ENABLE
+ Enables async page faults for the guest. So in case of a major page fault
+ the host is allowed to handle this async and continues the guest.
+
+ KVM_DEV_FLIC_APF_DISABLE_WAIT
+ Disables async page faults for the guest and waits until already pending
+ async page faults are done. This is necessary to trigger a completion interrupt
+ for every init interrupt before migrating the interrupt list.
+
+ KVM_DEV_FLIC_ADAPTER_REGISTER
+ Register an I/O adapter interrupt source. Takes a kvm_s390_io_adapter
+ describing the adapter to register:
+
+struct kvm_s390_io_adapter {
+ __u32 id;
+ __u8 isc;
+ __u8 maskable;
+ __u8 swap;
+ __u8 pad;
+};
+
+ id contains the unique id for the adapter, isc the I/O interruption subclass
+ to use, maskable whether this adapter may be masked (interrupts turned off)
+ and swap whether the indicators need to be byte swapped.
+
+
+ KVM_DEV_FLIC_ADAPTER_MODIFY
+ Modifies attributes of an existing I/O adapter interrupt source. Takes
+ a kvm_s390_io_adapter_req specifiying the adapter and the operation:
+
+struct kvm_s390_io_adapter_req {
+ __u32 id;
+ __u8 type;
+ __u8 mask;
+ __u16 pad0;
+ __u64 addr;
+};
+
+ id specifies the adapter and type the operation. The supported operations
+ are:
+
+ KVM_S390_IO_ADAPTER_MASK
+ mask or unmask the adapter, as specified in mask
+
+ KVM_S390_IO_ADAPTER_MAP
+ perform a gmap translation for the guest address provided in addr,
+ pin a userspace page for the translated address and add it to the
+ list of mappings
+
+ KVM_S390_IO_ADAPTER_UNMAP
+ release a userspace page for the translated address specified in addr
+ from the list of mappings
diff --git a/kernel/Documentation/virtual/kvm/devices/vfio.txt b/kernel/Documentation/virtual/kvm/devices/vfio.txt
new file mode 100644
index 000000000..ef51740c6
--- /dev/null
+++ b/kernel/Documentation/virtual/kvm/devices/vfio.txt
@@ -0,0 +1,22 @@
+VFIO virtual device
+===================
+
+Device types supported:
+ KVM_DEV_TYPE_VFIO
+
+Only one VFIO instance may be created per VM. The created device
+tracks VFIO groups in use by the VM and features of those groups
+important to the correctness and acceleration of the VM. As groups
+are enabled and disabled for use by the VM, KVM should be updated
+about their presence. When registered with KVM, a reference to the
+VFIO-group is held by KVM.
+
+Groups:
+ KVM_DEV_VFIO_GROUP
+
+KVM_DEV_VFIO_GROUP attributes:
+ KVM_DEV_VFIO_GROUP_ADD: Add a VFIO group to VFIO-KVM device tracking
+ KVM_DEV_VFIO_GROUP_DEL: Remove a VFIO group from VFIO-KVM device tracking
+
+For each, kvm_device_attr.addr points to an int32_t file descriptor
+for the VFIO group.
diff --git a/kernel/Documentation/virtual/kvm/devices/vm.txt b/kernel/Documentation/virtual/kvm/devices/vm.txt
new file mode 100644
index 000000000..5542c4641
--- /dev/null
+++ b/kernel/Documentation/virtual/kvm/devices/vm.txt
@@ -0,0 +1,85 @@
+Generic vm interface
+====================================
+
+The virtual machine "device" also accepts the ioctls KVM_SET_DEVICE_ATTR,
+KVM_GET_DEVICE_ATTR, and KVM_HAS_DEVICE_ATTR. The interface uses the same
+struct kvm_device_attr as other devices, but targets VM-wide settings
+and controls.
+
+The groups and attributes per virtual machine, if any, are architecture
+specific.
+
+1. GROUP: KVM_S390_VM_MEM_CTRL
+Architectures: s390
+
+1.1. ATTRIBUTE: KVM_S390_VM_MEM_ENABLE_CMMA
+Parameters: none
+Returns: -EBUSY if a vcpu is already defined, otherwise 0
+
+Enables Collaborative Memory Management Assist (CMMA) for the virtual machine.
+
+1.2. ATTRIBUTE: KVM_S390_VM_MEM_CLR_CMMA
+Parameters: none
+Returns: 0
+
+Clear the CMMA status for all guest pages, so any pages the guest marked
+as unused are again used any may not be reclaimed by the host.
+
+1.3. ATTRIBUTE KVM_S390_VM_MEM_LIMIT_SIZE
+Parameters: in attr->addr the address for the new limit of guest memory
+Returns: -EFAULT if the given address is not accessible
+ -EINVAL if the virtual machine is of type UCONTROL
+ -E2BIG if the given guest memory is to big for that machine
+ -EBUSY if a vcpu is already defined
+ -ENOMEM if not enough memory is available for a new shadow guest mapping
+ 0 otherwise
+
+Allows userspace to query the actual limit and set a new limit for
+the maximum guest memory size. The limit will be rounded up to
+2048 MB, 4096 GB, 8192 TB respectively, as this limit is governed by
+the number of page table levels.
+
+2. GROUP: KVM_S390_VM_CPU_MODEL
+Architectures: s390
+
+2.1. ATTRIBUTE: KVM_S390_VM_CPU_MACHINE (r/o)
+
+Allows user space to retrieve machine and kvm specific cpu related information:
+
+struct kvm_s390_vm_cpu_machine {
+ __u64 cpuid; # CPUID of host
+ __u32 ibc; # IBC level range offered by host
+ __u8 pad[4];
+ __u64 fac_mask[256]; # set of cpu facilities enabled by KVM
+ __u64 fac_list[256]; # set of cpu facilities offered by host
+}
+
+Parameters: address of buffer to store the machine related cpu data
+ of type struct kvm_s390_vm_cpu_machine*
+Returns: -EFAULT if the given address is not accessible from kernel space
+ -ENOMEM if not enough memory is available to process the ioctl
+ 0 in case of success
+
+2.2. ATTRIBUTE: KVM_S390_VM_CPU_PROCESSOR (r/w)
+
+Allows user space to retrieve or request to change cpu related information for a vcpu:
+
+struct kvm_s390_vm_cpu_processor {
+ __u64 cpuid; # CPUID currently (to be) used by this vcpu
+ __u16 ibc; # IBC level currently (to be) used by this vcpu
+ __u8 pad[6];
+ __u64 fac_list[256]; # set of cpu facilities currently (to be) used
+ # by this vcpu
+}
+
+KVM does not enforce or limit the cpu model data in any form. Take the information
+retrieved by means of KVM_S390_VM_CPU_MACHINE as hint for reasonable configuration
+setups. Instruction interceptions triggered by additionally set facilitiy bits that
+are not handled by KVM need to by imlemented in the VM driver code.
+
+Parameters: address of buffer to store/set the processor related cpu
+ data of type struct kvm_s390_vm_cpu_processor*.
+Returns: -EBUSY in case 1 or more vcpus are already activated (only in write case)
+ -EFAULT if the given address is not accessible from kernel space
+ -ENOMEM if not enough memory is available to process the ioctl
+ 0 in case of success
diff --git a/kernel/Documentation/virtual/kvm/devices/xics.txt b/kernel/Documentation/virtual/kvm/devices/xics.txt
new file mode 100644
index 000000000..42864935a
--- /dev/null
+++ b/kernel/Documentation/virtual/kvm/devices/xics.txt
@@ -0,0 +1,66 @@
+XICS interrupt controller
+
+Device type supported: KVM_DEV_TYPE_XICS
+
+Groups:
+ KVM_DEV_XICS_SOURCES
+ Attributes: One per interrupt source, indexed by the source number.
+
+This device emulates the XICS (eXternal Interrupt Controller
+Specification) defined in PAPR. The XICS has a set of interrupt
+sources, each identified by a 20-bit source number, and a set of
+Interrupt Control Presentation (ICP) entities, also called "servers",
+each associated with a virtual CPU.
+
+The ICP entities are created by enabling the KVM_CAP_IRQ_ARCH
+capability for each vcpu, specifying KVM_CAP_IRQ_XICS in args[0] and
+the interrupt server number (i.e. the vcpu number from the XICS's
+point of view) in args[1] of the kvm_enable_cap struct. Each ICP has
+64 bits of state which can be read and written using the
+KVM_GET_ONE_REG and KVM_SET_ONE_REG ioctls on the vcpu. The 64 bit
+state word has the following bitfields, starting at the
+least-significant end of the word:
+
+* Unused, 16 bits
+
+* Pending interrupt priority, 8 bits
+ Zero is the highest priority, 255 means no interrupt is pending.
+
+* Pending IPI (inter-processor interrupt) priority, 8 bits
+ Zero is the highest priority, 255 means no IPI is pending.
+
+* Pending interrupt source number, 24 bits
+ Zero means no interrupt pending, 2 means an IPI is pending
+
+* Current processor priority, 8 bits
+ Zero is the highest priority, meaning no interrupts can be
+ delivered, and 255 is the lowest priority.
+
+Each source has 64 bits of state that can be read and written using
+the KVM_GET_DEVICE_ATTR and KVM_SET_DEVICE_ATTR ioctls, specifying the
+KVM_DEV_XICS_SOURCES attribute group, with the attribute number being
+the interrupt source number. The 64 bit state word has the following
+bitfields, starting from the least-significant end of the word:
+
+* Destination (server number), 32 bits
+ This specifies where the interrupt should be sent, and is the
+ interrupt server number specified for the destination vcpu.
+
+* Priority, 8 bits
+ This is the priority specified for this interrupt source, where 0 is
+ the highest priority and 255 is the lowest. An interrupt with a
+ priority of 255 will never be delivered.
+
+* Level sensitive flag, 1 bit
+ This bit is 1 for a level-sensitive interrupt source, or 0 for
+ edge-sensitive (or MSI).
+
+* Masked flag, 1 bit
+ This bit is set to 1 if the interrupt is masked (cannot be delivered
+ regardless of its priority), for example by the ibm,int-off RTAS
+ call, or 0 if it is not masked.
+
+* Pending flag, 1 bit
+ This bit is 1 if the source has a pending interrupt, otherwise 0.
+
+Only one XICS instance may be created per VM.
diff --git a/kernel/Documentation/virtual/kvm/hypercalls.txt b/kernel/Documentation/virtual/kvm/hypercalls.txt
new file mode 100644
index 000000000..c8d040e27
--- /dev/null
+++ b/kernel/Documentation/virtual/kvm/hypercalls.txt
@@ -0,0 +1,83 @@
+Linux KVM Hypercall:
+===================
+X86:
+ KVM Hypercalls have a three-byte sequence of either the vmcall or the vmmcall
+ instruction. The hypervisor can replace it with instructions that are
+ guaranteed to be supported.
+
+ Up to four arguments may be passed in rbx, rcx, rdx, and rsi respectively.
+ The hypercall number should be placed in rax and the return value will be
+ placed in rax. No other registers will be clobbered unless explicitly stated
+ by the particular hypercall.
+
+S390:
+ R2-R7 are used for parameters 1-6. In addition, R1 is used for hypercall
+ number. The return value is written to R2.
+
+ S390 uses diagnose instruction as hypercall (0x500) along with hypercall
+ number in R1.
+
+ For further information on the S390 diagnose call as supported by KVM,
+ refer to Documentation/virtual/kvm/s390-diag.txt.
+
+ PowerPC:
+ It uses R3-R10 and hypercall number in R11. R4-R11 are used as output registers.
+ Return value is placed in R3.
+
+ KVM hypercalls uses 4 byte opcode, that are patched with 'hypercall-instructions'
+ property inside the device tree's /hypervisor node.
+ For more information refer to Documentation/virtual/kvm/ppc-pv.txt
+
+KVM Hypercalls Documentation
+===========================
+The template for each hypercall is:
+1. Hypercall name.
+2. Architecture(s)
+3. Status (deprecated, obsolete, active)
+4. Purpose
+
+1. KVM_HC_VAPIC_POLL_IRQ
+------------------------
+Architecture: x86
+Status: active
+Purpose: Trigger guest exit so that the host can check for pending
+interrupts on reentry.
+
+2. KVM_HC_MMU_OP
+------------------------
+Architecture: x86
+Status: deprecated.
+Purpose: Support MMU operations such as writing to PTE,
+flushing TLB, release PT.
+
+3. KVM_HC_FEATURES
+------------------------
+Architecture: PPC
+Status: active
+Purpose: Expose hypercall availability to the guest. On x86 platforms, cpuid
+used to enumerate which hypercalls are available. On PPC, either device tree
+based lookup ( which is also what EPAPR dictates) OR KVM specific enumeration
+mechanism (which is this hypercall) can be used.
+
+4. KVM_HC_PPC_MAP_MAGIC_PAGE
+------------------------
+Architecture: PPC
+Status: active
+Purpose: To enable communication between the hypervisor and guest there is a
+shared page that contains parts of supervisor visible register state.
+The guest can map this shared page to access its supervisor register through
+memory using this hypercall.
+
+5. KVM_HC_KICK_CPU
+------------------------
+Architecture: x86
+Status: active
+Purpose: Hypercall used to wakeup a vcpu from HLT state
+Usage example : A vcpu of a paravirtualized guest that is busywaiting in guest
+kernel mode for an event to occur (ex: a spinlock to become available) can
+execute HLT instruction once it has busy-waited for more than a threshold
+time-interval. Execution of HLT instruction would cause the hypervisor to put
+the vcpu to sleep until occurrence of an appropriate event. Another vcpu of the
+same guest can wakeup the sleeping vcpu by issuing KVM_HC_KICK_CPU hypercall,
+specifying APIC ID (a1) of the vcpu to be woken up. An additional argument (a0)
+is used in the hypercall for future use.
diff --git a/kernel/Documentation/virtual/kvm/locking.txt b/kernel/Documentation/virtual/kvm/locking.txt
new file mode 100644
index 000000000..d68af4dc3
--- /dev/null
+++ b/kernel/Documentation/virtual/kvm/locking.txt
@@ -0,0 +1,168 @@
+KVM Lock Overview
+=================
+
+1. Acquisition Orders
+---------------------
+
+(to be written)
+
+2: Exception
+------------
+
+Fast page fault:
+
+Fast page fault is the fast path which fixes the guest page fault out of
+the mmu-lock on x86. Currently, the page fault can be fast only if the
+shadow page table is present and it is caused by write-protect, that means
+we just need change the W bit of the spte.
+
+What we use to avoid all the race is the SPTE_HOST_WRITEABLE bit and
+SPTE_MMU_WRITEABLE bit on the spte:
+- SPTE_HOST_WRITEABLE means the gfn is writable on host.
+- SPTE_MMU_WRITEABLE means the gfn is writable on mmu. The bit is set when
+ the gfn is writable on guest mmu and it is not write-protected by shadow
+ page write-protection.
+
+On fast page fault path, we will use cmpxchg to atomically set the spte W
+bit if spte.SPTE_HOST_WRITEABLE = 1 and spte.SPTE_WRITE_PROTECT = 1, this
+is safe because whenever changing these bits can be detected by cmpxchg.
+
+But we need carefully check these cases:
+1): The mapping from gfn to pfn
+The mapping from gfn to pfn may be changed since we can only ensure the pfn
+is not changed during cmpxchg. This is a ABA problem, for example, below case
+will happen:
+
+At the beginning:
+gpte = gfn1
+gfn1 is mapped to pfn1 on host
+spte is the shadow page table entry corresponding with gpte and
+spte = pfn1
+
+ VCPU 0 VCPU0
+on fast page fault path:
+
+ old_spte = *spte;
+ pfn1 is swapped out:
+ spte = 0;
+
+ pfn1 is re-alloced for gfn2.
+
+ gpte is changed to point to
+ gfn2 by the guest:
+ spte = pfn1;
+
+ if (cmpxchg(spte, old_spte, old_spte+W)
+ mark_page_dirty(vcpu->kvm, gfn1)
+ OOPS!!!
+
+We dirty-log for gfn1, that means gfn2 is lost in dirty-bitmap.
+
+For direct sp, we can easily avoid it since the spte of direct sp is fixed
+to gfn. For indirect sp, before we do cmpxchg, we call gfn_to_pfn_atomic()
+to pin gfn to pfn, because after gfn_to_pfn_atomic():
+- We have held the refcount of pfn that means the pfn can not be freed and
+ be reused for another gfn.
+- The pfn is writable that means it can not be shared between different gfns
+ by KSM.
+
+Then, we can ensure the dirty bitmaps is correctly set for a gfn.
+
+Currently, to simplify the whole things, we disable fast page fault for
+indirect shadow page.
+
+2): Dirty bit tracking
+In the origin code, the spte can be fast updated (non-atomically) if the
+spte is read-only and the Accessed bit has already been set since the
+Accessed bit and Dirty bit can not be lost.
+
+But it is not true after fast page fault since the spte can be marked
+writable between reading spte and updating spte. Like below case:
+
+At the beginning:
+spte.W = 0
+spte.Accessed = 1
+
+ VCPU 0 VCPU0
+In mmu_spte_clear_track_bits():
+
+ old_spte = *spte;
+
+ /* 'if' condition is satisfied. */
+ if (old_spte.Accssed == 1 &&
+ old_spte.W == 0)
+ spte = 0ull;
+ on fast page fault path:
+ spte.W = 1
+ memory write on the spte:
+ spte.Dirty = 1
+
+
+ else
+ old_spte = xchg(spte, 0ull)
+
+
+ if (old_spte.Accssed == 1)
+ kvm_set_pfn_accessed(spte.pfn);
+ if (old_spte.Dirty == 1)
+ kvm_set_pfn_dirty(spte.pfn);
+ OOPS!!!
+
+The Dirty bit is lost in this case.
+
+In order to avoid this kind of issue, we always treat the spte as "volatile"
+if it can be updated out of mmu-lock, see spte_has_volatile_bits(), it means,
+the spte is always atomically updated in this case.
+
+3): flush tlbs due to spte updated
+If the spte is updated from writable to readonly, we should flush all TLBs,
+otherwise rmap_write_protect will find a read-only spte, even though the
+writable spte might be cached on a CPU's TLB.
+
+As mentioned before, the spte can be updated to writable out of mmu-lock on
+fast page fault path, in order to easily audit the path, we see if TLBs need
+be flushed caused by this reason in mmu_spte_update() since this is a common
+function to update spte (present -> present).
+
+Since the spte is "volatile" if it can be updated out of mmu-lock, we always
+atomically update the spte, the race caused by fast page fault can be avoided,
+See the comments in spte_has_volatile_bits() and mmu_spte_update().
+
+3. Reference
+------------
+
+Name: kvm_lock
+Type: spinlock_t
+Arch: any
+Protects: - vm_list
+
+Name: kvm_count_lock
+Type: raw_spinlock_t
+Arch: any
+Protects: - hardware virtualization enable/disable
+Comment: 'raw' because hardware enabling/disabling must be atomic /wrt
+ migration.
+
+Name: kvm_arch::tsc_write_lock
+Type: raw_spinlock
+Arch: x86
+Protects: - kvm_arch::{last_tsc_write,last_tsc_nsec,last_tsc_offset}
+ - tsc offset in vmcb
+Comment: 'raw' because updating the tsc offsets must not be preempted.
+
+Name: kvm->mmu_lock
+Type: spinlock_t
+Arch: any
+Protects: -shadow page/shadow tlb entry
+Comment: it is a spinlock since it is used in mmu notifier.
+
+Name: kvm->srcu
+Type: srcu lock
+Arch: any
+Protects: - kvm->memslots
+ - kvm->buses
+Comment: The srcu read lock must be held while accessing memslots (e.g.
+ when using gfn_to_* functions) and while accessing in-kernel
+ MMIO/PIO address->device structure mapping (kvm->buses).
+ The srcu index can be stored in kvm_vcpu->srcu_idx per vcpu
+ if it is needed by multiple functions.
diff --git a/kernel/Documentation/virtual/kvm/mmu.txt b/kernel/Documentation/virtual/kvm/mmu.txt
new file mode 100644
index 000000000..c59bd9bc4
--- /dev/null
+++ b/kernel/Documentation/virtual/kvm/mmu.txt
@@ -0,0 +1,458 @@
+The x86 kvm shadow mmu
+======================
+
+The mmu (in arch/x86/kvm, files mmu.[ch] and paging_tmpl.h) is responsible
+for presenting a standard x86 mmu to the guest, while translating guest
+physical addresses to host physical addresses.
+
+The mmu code attempts to satisfy the following requirements:
+
+- correctness: the guest should not be able to determine that it is running
+ on an emulated mmu except for timing (we attempt to comply
+ with the specification, not emulate the characteristics of
+ a particular implementation such as tlb size)
+- security: the guest must not be able to touch host memory not assigned
+ to it
+- performance: minimize the performance penalty imposed by the mmu
+- scaling: need to scale to large memory and large vcpu guests
+- hardware: support the full range of x86 virtualization hardware
+- integration: Linux memory management code must be in control of guest memory
+ so that swapping, page migration, page merging, transparent
+ hugepages, and similar features work without change
+- dirty tracking: report writes to guest memory to enable live migration
+ and framebuffer-based displays
+- footprint: keep the amount of pinned kernel memory low (most memory
+ should be shrinkable)
+- reliability: avoid multipage or GFP_ATOMIC allocations
+
+Acronyms
+========
+
+pfn host page frame number
+hpa host physical address
+hva host virtual address
+gfn guest frame number
+gpa guest physical address
+gva guest virtual address
+ngpa nested guest physical address
+ngva nested guest virtual address
+pte page table entry (used also to refer generically to paging structure
+ entries)
+gpte guest pte (referring to gfns)
+spte shadow pte (referring to pfns)
+tdp two dimensional paging (vendor neutral term for NPT and EPT)
+
+Virtual and real hardware supported
+===================================
+
+The mmu supports first-generation mmu hardware, which allows an atomic switch
+of the current paging mode and cr3 during guest entry, as well as
+two-dimensional paging (AMD's NPT and Intel's EPT). The emulated hardware
+it exposes is the traditional 2/3/4 level x86 mmu, with support for global
+pages, pae, pse, pse36, cr0.wp, and 1GB pages. Work is in progress to support
+exposing NPT capable hardware on NPT capable hosts.
+
+Translation
+===========
+
+The primary job of the mmu is to program the processor's mmu to translate
+addresses for the guest. Different translations are required at different
+times:
+
+- when guest paging is disabled, we translate guest physical addresses to
+ host physical addresses (gpa->hpa)
+- when guest paging is enabled, we translate guest virtual addresses, to
+ guest physical addresses, to host physical addresses (gva->gpa->hpa)
+- when the guest launches a guest of its own, we translate nested guest
+ virtual addresses, to nested guest physical addresses, to guest physical
+ addresses, to host physical addresses (ngva->ngpa->gpa->hpa)
+
+The primary challenge is to encode between 1 and 3 translations into hardware
+that support only 1 (traditional) and 2 (tdp) translations. When the
+number of required translations matches the hardware, the mmu operates in
+direct mode; otherwise it operates in shadow mode (see below).
+
+Memory
+======
+
+Guest memory (gpa) is part of the user address space of the process that is
+using kvm. Userspace defines the translation between guest addresses and user
+addresses (gpa->hva); note that two gpas may alias to the same hva, but not
+vice versa.
+
+These hvas may be backed using any method available to the host: anonymous
+memory, file backed memory, and device memory. Memory might be paged by the
+host at any time.
+
+Events
+======
+
+The mmu is driven by events, some from the guest, some from the host.
+
+Guest generated events:
+- writes to control registers (especially cr3)
+- invlpg/invlpga instruction execution
+- access to missing or protected translations
+
+Host generated events:
+- changes in the gpa->hpa translation (either through gpa->hva changes or
+ through hva->hpa changes)
+- memory pressure (the shrinker)
+
+Shadow pages
+============
+
+The principal data structure is the shadow page, 'struct kvm_mmu_page'. A
+shadow page contains 512 sptes, which can be either leaf or nonleaf sptes. A
+shadow page may contain a mix of leaf and nonleaf sptes.
+
+A nonleaf spte allows the hardware mmu to reach the leaf pages and
+is not related to a translation directly. It points to other shadow pages.
+
+A leaf spte corresponds to either one or two translations encoded into
+one paging structure entry. These are always the lowest level of the
+translation stack, with optional higher level translations left to NPT/EPT.
+Leaf ptes point at guest pages.
+
+The following table shows translations encoded by leaf ptes, with higher-level
+translations in parentheses:
+
+ Non-nested guests:
+ nonpaging: gpa->hpa
+ paging: gva->gpa->hpa
+ paging, tdp: (gva->)gpa->hpa
+ Nested guests:
+ non-tdp: ngva->gpa->hpa (*)
+ tdp: (ngva->)ngpa->gpa->hpa
+
+(*) the guest hypervisor will encode the ngva->gpa translation into its page
+ tables if npt is not present
+
+Shadow pages contain the following information:
+ role.level:
+ The level in the shadow paging hierarchy that this shadow page belongs to.
+ 1=4k sptes, 2=2M sptes, 3=1G sptes, etc.
+ role.direct:
+ If set, leaf sptes reachable from this page are for a linear range.
+ Examples include real mode translation, large guest pages backed by small
+ host pages, and gpa->hpa translations when NPT or EPT is active.
+ The linear range starts at (gfn << PAGE_SHIFT) and its size is determined
+ by role.level (2MB for first level, 1GB for second level, 0.5TB for third
+ level, 256TB for fourth level)
+ If clear, this page corresponds to a guest page table denoted by the gfn
+ field.
+ role.quadrant:
+ When role.cr4_pae=0, the guest uses 32-bit gptes while the host uses 64-bit
+ sptes. That means a guest page table contains more ptes than the host,
+ so multiple shadow pages are needed to shadow one guest page.
+ For first-level shadow pages, role.quadrant can be 0 or 1 and denotes the
+ first or second 512-gpte block in the guest page table. For second-level
+ page tables, each 32-bit gpte is converted to two 64-bit sptes
+ (since each first-level guest page is shadowed by two first-level
+ shadow pages) so role.quadrant takes values in the range 0..3. Each
+ quadrant maps 1GB virtual address space.
+ role.access:
+ Inherited guest access permissions in the form uwx. Note execute
+ permission is positive, not negative.
+ role.invalid:
+ The page is invalid and should not be used. It is a root page that is
+ currently pinned (by a cpu hardware register pointing to it); once it is
+ unpinned it will be destroyed.
+ role.cr4_pae:
+ Contains the value of cr4.pae for which the page is valid (e.g. whether
+ 32-bit or 64-bit gptes are in use).
+ role.nxe:
+ Contains the value of efer.nxe for which the page is valid.
+ role.cr0_wp:
+ Contains the value of cr0.wp for which the page is valid.
+ role.smep_andnot_wp:
+ Contains the value of cr4.smep && !cr0.wp for which the page is valid
+ (pages for which this is true are different from other pages; see the
+ treatment of cr0.wp=0 below).
+ role.smap_andnot_wp:
+ Contains the value of cr4.smap && !cr0.wp for which the page is valid
+ (pages for which this is true are different from other pages; see the
+ treatment of cr0.wp=0 below).
+ gfn:
+ Either the guest page table containing the translations shadowed by this
+ page, or the base page frame for linear translations. See role.direct.
+ spt:
+ A pageful of 64-bit sptes containing the translations for this page.
+ Accessed by both kvm and hardware.
+ The page pointed to by spt will have its page->private pointing back
+ at the shadow page structure.
+ sptes in spt point either at guest pages, or at lower-level shadow pages.
+ Specifically, if sp1 and sp2 are shadow pages, then sp1->spt[n] may point
+ at __pa(sp2->spt). sp2 will point back at sp1 through parent_pte.
+ The spt array forms a DAG structure with the shadow page as a node, and
+ guest pages as leaves.
+ gfns:
+ An array of 512 guest frame numbers, one for each present pte. Used to
+ perform a reverse map from a pte to a gfn. When role.direct is set, any
+ element of this array can be calculated from the gfn field when used, in
+ this case, the array of gfns is not allocated. See role.direct and gfn.
+ root_count:
+ A counter keeping track of how many hardware registers (guest cr3 or
+ pdptrs) are now pointing at the page. While this counter is nonzero, the
+ page cannot be destroyed. See role.invalid.
+ parent_ptes:
+ The reverse mapping for the pte/ptes pointing at this page's spt. If
+ parent_ptes bit 0 is zero, only one spte points at this pages and
+ parent_ptes points at this single spte, otherwise, there exists multiple
+ sptes pointing at this page and (parent_ptes & ~0x1) points at a data
+ structure with a list of parent_ptes.
+ unsync:
+ If true, then the translations in this page may not match the guest's
+ translation. This is equivalent to the state of the tlb when a pte is
+ changed but before the tlb entry is flushed. Accordingly, unsync ptes
+ are synchronized when the guest executes invlpg or flushes its tlb by
+ other means. Valid for leaf pages.
+ unsync_children:
+ How many sptes in the page point at pages that are unsync (or have
+ unsynchronized children).
+ unsync_child_bitmap:
+ A bitmap indicating which sptes in spt point (directly or indirectly) at
+ pages that may be unsynchronized. Used to quickly locate all unsychronized
+ pages reachable from a given page.
+ mmu_valid_gen:
+ Generation number of the page. It is compared with kvm->arch.mmu_valid_gen
+ during hash table lookup, and used to skip invalidated shadow pages (see
+ "Zapping all pages" below.)
+ clear_spte_count:
+ Only present on 32-bit hosts, where a 64-bit spte cannot be written
+ atomically. The reader uses this while running out of the MMU lock
+ to detect in-progress updates and retry them until the writer has
+ finished the write.
+ write_flooding_count:
+ A guest may write to a page table many times, causing a lot of
+ emulations if the page needs to be write-protected (see "Synchronized
+ and unsynchronized pages" below). Leaf pages can be unsynchronized
+ so that they do not trigger frequent emulation, but this is not
+ possible for non-leafs. This field counts the number of emulations
+ since the last time the page table was actually used; if emulation
+ is triggered too frequently on this page, KVM will unmap the page
+ to avoid emulation in the future.
+
+Reverse map
+===========
+
+The mmu maintains a reverse mapping whereby all ptes mapping a page can be
+reached given its gfn. This is used, for example, when swapping out a page.
+
+Synchronized and unsynchronized pages
+=====================================
+
+The guest uses two events to synchronize its tlb and page tables: tlb flushes
+and page invalidations (invlpg).
+
+A tlb flush means that we need to synchronize all sptes reachable from the
+guest's cr3. This is expensive, so we keep all guest page tables write
+protected, and synchronize sptes to gptes when a gpte is written.
+
+A special case is when a guest page table is reachable from the current
+guest cr3. In this case, the guest is obliged to issue an invlpg instruction
+before using the translation. We take advantage of that by removing write
+protection from the guest page, and allowing the guest to modify it freely.
+We synchronize modified gptes when the guest invokes invlpg. This reduces
+the amount of emulation we have to do when the guest modifies multiple gptes,
+or when the a guest page is no longer used as a page table and is used for
+random guest data.
+
+As a side effect we have to resynchronize all reachable unsynchronized shadow
+pages on a tlb flush.
+
+
+Reaction to events
+==================
+
+- guest page fault (or npt page fault, or ept violation)
+
+This is the most complicated event. The cause of a page fault can be:
+
+ - a true guest fault (the guest translation won't allow the access) (*)
+ - access to a missing translation
+ - access to a protected translation
+ - when logging dirty pages, memory is write protected
+ - synchronized shadow pages are write protected (*)
+ - access to untranslatable memory (mmio)
+
+ (*) not applicable in direct mode
+
+Handling a page fault is performed as follows:
+
+ - if the RSV bit of the error code is set, the page fault is caused by guest
+ accessing MMIO and cached MMIO information is available.
+ - walk shadow page table
+ - check for valid generation number in the spte (see "Fast invalidation of
+ MMIO sptes" below)
+ - cache the information to vcpu->arch.mmio_gva, vcpu->arch.access and
+ vcpu->arch.mmio_gfn, and call the emulator
+ - If both P bit and R/W bit of error code are set, this could possibly
+ be handled as a "fast page fault" (fixed without taking the MMU lock). See
+ the description in Documentation/virtual/kvm/locking.txt.
+ - if needed, walk the guest page tables to determine the guest translation
+ (gva->gpa or ngpa->gpa)
+ - if permissions are insufficient, reflect the fault back to the guest
+ - determine the host page
+ - if this is an mmio request, there is no host page; cache the info to
+ vcpu->arch.mmio_gva, vcpu->arch.access and vcpu->arch.mmio_gfn
+ - walk the shadow page table to find the spte for the translation,
+ instantiating missing intermediate page tables as necessary
+ - If this is an mmio request, cache the mmio info to the spte and set some
+ reserved bit on the spte (see callers of kvm_mmu_set_mmio_spte_mask)
+ - try to unsynchronize the page
+ - if successful, we can let the guest continue and modify the gpte
+ - emulate the instruction
+ - if failed, unshadow the page and let the guest continue
+ - update any translations that were modified by the instruction
+
+invlpg handling:
+
+ - walk the shadow page hierarchy and drop affected translations
+ - try to reinstantiate the indicated translation in the hope that the
+ guest will use it in the near future
+
+Guest control register updates:
+
+- mov to cr3
+ - look up new shadow roots
+ - synchronize newly reachable shadow pages
+
+- mov to cr0/cr4/efer
+ - set up mmu context for new paging mode
+ - look up new shadow roots
+ - synchronize newly reachable shadow pages
+
+Host translation updates:
+
+ - mmu notifier called with updated hva
+ - look up affected sptes through reverse map
+ - drop (or update) translations
+
+Emulating cr0.wp
+================
+
+If tdp is not enabled, the host must keep cr0.wp=1 so page write protection
+works for the guest kernel, not guest guest userspace. When the guest
+cr0.wp=1, this does not present a problem. However when the guest cr0.wp=0,
+we cannot map the permissions for gpte.u=1, gpte.w=0 to any spte (the
+semantics require allowing any guest kernel access plus user read access).
+
+We handle this by mapping the permissions to two possible sptes, depending
+on fault type:
+
+- kernel write fault: spte.u=0, spte.w=1 (allows full kernel access,
+ disallows user access)
+- read fault: spte.u=1, spte.w=0 (allows full read access, disallows kernel
+ write access)
+
+(user write faults generate a #PF)
+
+In the first case there are two additional complications:
+- if CR4.SMEP is enabled: since we've turned the page into a kernel page,
+ the kernel may now execute it. We handle this by also setting spte.nx.
+ If we get a user fetch or read fault, we'll change spte.u=1 and
+ spte.nx=gpte.nx back.
+- if CR4.SMAP is disabled: since the page has been changed to a kernel
+ page, it can not be reused when CR4.SMAP is enabled. We set
+ CR4.SMAP && !CR0.WP into shadow page's role to avoid this case. Note,
+ here we do not care the case that CR4.SMAP is enabled since KVM will
+ directly inject #PF to guest due to failed permission check.
+
+To prevent an spte that was converted into a kernel page with cr0.wp=0
+from being written by the kernel after cr0.wp has changed to 1, we make
+the value of cr0.wp part of the page role. This means that an spte created
+with one value of cr0.wp cannot be used when cr0.wp has a different value -
+it will simply be missed by the shadow page lookup code. A similar issue
+exists when an spte created with cr0.wp=0 and cr4.smep=0 is used after
+changing cr4.smep to 1. To avoid this, the value of !cr0.wp && cr4.smep
+is also made a part of the page role.
+
+Large pages
+===========
+
+The mmu supports all combinations of large and small guest and host pages.
+Supported page sizes include 4k, 2M, 4M, and 1G. 4M pages are treated as
+two separate 2M pages, on both guest and host, since the mmu always uses PAE
+paging.
+
+To instantiate a large spte, four constraints must be satisfied:
+
+- the spte must point to a large host page
+- the guest pte must be a large pte of at least equivalent size (if tdp is
+ enabled, there is no guest pte and this condition is satisfied)
+- if the spte will be writeable, the large page frame may not overlap any
+ write-protected pages
+- the guest page must be wholly contained by a single memory slot
+
+To check the last two conditions, the mmu maintains a ->write_count set of
+arrays for each memory slot and large page size. Every write protected page
+causes its write_count to be incremented, thus preventing instantiation of
+a large spte. The frames at the end of an unaligned memory slot have
+artificially inflated ->write_counts so they can never be instantiated.
+
+Zapping all pages (page generation count)
+=========================================
+
+For the large memory guests, walking and zapping all pages is really slow
+(because there are a lot of pages), and also blocks memory accesses of
+all VCPUs because it needs to hold the MMU lock.
+
+To make it be more scalable, kvm maintains a global generation number
+which is stored in kvm->arch.mmu_valid_gen. Every shadow page stores
+the current global generation-number into sp->mmu_valid_gen when it
+is created. Pages with a mismatching generation number are "obsolete".
+
+When KVM need zap all shadow pages sptes, it just simply increases the global
+generation-number then reload root shadow pages on all vcpus. As the VCPUs
+create new shadow page tables, the old pages are not used because of the
+mismatching generation number.
+
+KVM then walks through all pages and zaps obsolete pages. While the zap
+operation needs to take the MMU lock, the lock can be released periodically
+so that the VCPUs can make progress.
+
+Fast invalidation of MMIO sptes
+===============================
+
+As mentioned in "Reaction to events" above, kvm will cache MMIO
+information in leaf sptes. When a new memslot is added or an existing
+memslot is changed, this information may become stale and needs to be
+invalidated. This also needs to hold the MMU lock while walking all
+shadow pages, and is made more scalable with a similar technique.
+
+MMIO sptes have a few spare bits, which are used to store a
+generation number. The global generation number is stored in
+kvm_memslots(kvm)->generation, and increased whenever guest memory info
+changes. This generation number is distinct from the one described in
+the previous section.
+
+When KVM finds an MMIO spte, it checks the generation number of the spte.
+If the generation number of the spte does not equal the global generation
+number, it will ignore the cached MMIO information and handle the page
+fault through the slow path.
+
+Since only 19 bits are used to store generation-number on mmio spte, all
+pages are zapped when there is an overflow.
+
+Unfortunately, a single memory access might access kvm_memslots(kvm) multiple
+times, the last one happening when the generation number is retrieved and
+stored into the MMIO spte. Thus, the MMIO spte might be created based on
+out-of-date information, but with an up-to-date generation number.
+
+To avoid this, the generation number is incremented again after synchronize_srcu
+returns; thus, the low bit of kvm_memslots(kvm)->generation is only 1 during a
+memslot update, while some SRCU readers might be using the old copy. We do not
+want to use an MMIO sptes created with an odd generation number, and we can do
+this without losing a bit in the MMIO spte. The low bit of the generation
+is not stored in MMIO spte, and presumed zero when it is extracted out of the
+spte. If KVM is unlucky and creates an MMIO spte while the low bit is 1,
+the next access to the spte will always be a cache miss.
+
+
+Further reading
+===============
+
+- NPT presentation from KVM Forum 2008
+ http://www.linux-kvm.org/wiki/images/c/c8/KvmForum2008%24kdf2008_21.pdf
+
diff --git a/kernel/Documentation/virtual/kvm/msr.txt b/kernel/Documentation/virtual/kvm/msr.txt
new file mode 100644
index 000000000..2a71c8f29
--- /dev/null
+++ b/kernel/Documentation/virtual/kvm/msr.txt
@@ -0,0 +1,266 @@
+KVM-specific MSRs.
+Glauber Costa <glommer@redhat.com>, Red Hat Inc, 2010
+=====================================================
+
+KVM makes use of some custom MSRs to service some requests.
+
+Custom MSRs have a range reserved for them, that goes from
+0x4b564d00 to 0x4b564dff. There are MSRs outside this area,
+but they are deprecated and their use is discouraged.
+
+Custom MSR list
+--------
+
+The current supported Custom MSR list is:
+
+MSR_KVM_WALL_CLOCK_NEW: 0x4b564d00
+
+ data: 4-byte alignment physical address of a memory area which must be
+ in guest RAM. This memory is expected to hold a copy of the following
+ structure:
+
+ struct pvclock_wall_clock {
+ u32 version;
+ u32 sec;
+ u32 nsec;
+ } __attribute__((__packed__));
+
+ whose data will be filled in by the hypervisor. The hypervisor is only
+ guaranteed to update this data at the moment of MSR write.
+ Users that want to reliably query this information more than once have
+ to write more than once to this MSR. Fields have the following meanings:
+
+ version: guest has to check version before and after grabbing
+ time information and check that they are both equal and even.
+ An odd version indicates an in-progress update.
+
+ sec: number of seconds for wallclock at time of boot.
+
+ nsec: number of nanoseconds for wallclock at time of boot.
+
+ In order to get the current wallclock time, the system_time from
+ MSR_KVM_SYSTEM_TIME_NEW needs to be added.
+
+ Note that although MSRs are per-CPU entities, the effect of this
+ particular MSR is global.
+
+ Availability of this MSR must be checked via bit 3 in 0x4000001 cpuid
+ leaf prior to usage.
+
+MSR_KVM_SYSTEM_TIME_NEW: 0x4b564d01
+
+ data: 4-byte aligned physical address of a memory area which must be in
+ guest RAM, plus an enable bit in bit 0. This memory is expected to hold
+ a copy of the following structure:
+
+ struct pvclock_vcpu_time_info {
+ u32 version;
+ u32 pad0;
+ u64 tsc_timestamp;
+ u64 system_time;
+ u32 tsc_to_system_mul;
+ s8 tsc_shift;
+ u8 flags;
+ u8 pad[2];
+ } __attribute__((__packed__)); /* 32 bytes */
+
+ whose data will be filled in by the hypervisor periodically. Only one
+ write, or registration, is needed for each VCPU. The interval between
+ updates of this structure is arbitrary and implementation-dependent.
+ The hypervisor may update this structure at any time it sees fit until
+ anything with bit0 == 0 is written to it.
+
+ Fields have the following meanings:
+
+ version: guest has to check version before and after grabbing
+ time information and check that they are both equal and even.
+ An odd version indicates an in-progress update.
+
+ tsc_timestamp: the tsc value at the current VCPU at the time
+ of the update of this structure. Guests can subtract this value
+ from current tsc to derive a notion of elapsed time since the
+ structure update.
+
+ system_time: a host notion of monotonic time, including sleep
+ time at the time this structure was last updated. Unit is
+ nanoseconds.
+
+ tsc_to_system_mul: multiplier to be used when converting
+ tsc-related quantity to nanoseconds
+
+ tsc_shift: shift to be used when converting tsc-related
+ quantity to nanoseconds. This shift will ensure that
+ multiplication with tsc_to_system_mul does not overflow.
+ A positive value denotes a left shift, a negative value
+ a right shift.
+
+ The conversion from tsc to nanoseconds involves an additional
+ right shift by 32 bits. With this information, guests can
+ derive per-CPU time by doing:
+
+ time = (current_tsc - tsc_timestamp)
+ if (tsc_shift >= 0)
+ time <<= tsc_shift;
+ else
+ time >>= -tsc_shift;
+ time = (time * tsc_to_system_mul) >> 32
+ time = time + system_time
+
+ flags: bits in this field indicate extended capabilities
+ coordinated between the guest and the hypervisor. Availability
+ of specific flags has to be checked in 0x40000001 cpuid leaf.
+ Current flags are:
+
+ flag bit | cpuid bit | meaning
+ -------------------------------------------------------------
+ | | time measures taken across
+ 0 | 24 | multiple cpus are guaranteed to
+ | | be monotonic
+ -------------------------------------------------------------
+ | | guest vcpu has been paused by
+ 1 | N/A | the host
+ | | See 4.70 in api.txt
+ -------------------------------------------------------------
+
+ Availability of this MSR must be checked via bit 3 in 0x4000001 cpuid
+ leaf prior to usage.
+
+
+MSR_KVM_WALL_CLOCK: 0x11
+
+ data and functioning: same as MSR_KVM_WALL_CLOCK_NEW. Use that instead.
+
+ This MSR falls outside the reserved KVM range and may be removed in the
+ future. Its usage is deprecated.
+
+ Availability of this MSR must be checked via bit 0 in 0x4000001 cpuid
+ leaf prior to usage.
+
+MSR_KVM_SYSTEM_TIME: 0x12
+
+ data and functioning: same as MSR_KVM_SYSTEM_TIME_NEW. Use that instead.
+
+ This MSR falls outside the reserved KVM range and may be removed in the
+ future. Its usage is deprecated.
+
+ Availability of this MSR must be checked via bit 0 in 0x4000001 cpuid
+ leaf prior to usage.
+
+ The suggested algorithm for detecting kvmclock presence is then:
+
+ if (!kvm_para_available()) /* refer to cpuid.txt */
+ return NON_PRESENT;
+
+ flags = cpuid_eax(0x40000001);
+ if (flags & 3) {
+ msr_kvm_system_time = MSR_KVM_SYSTEM_TIME_NEW;
+ msr_kvm_wall_clock = MSR_KVM_WALL_CLOCK_NEW;
+ return PRESENT;
+ } else if (flags & 0) {
+ msr_kvm_system_time = MSR_KVM_SYSTEM_TIME;
+ msr_kvm_wall_clock = MSR_KVM_WALL_CLOCK;
+ return PRESENT;
+ } else
+ return NON_PRESENT;
+
+MSR_KVM_ASYNC_PF_EN: 0x4b564d02
+ data: Bits 63-6 hold 64-byte aligned physical address of a
+ 64 byte memory area which must be in guest RAM and must be
+ zeroed. Bits 5-2 are reserved and should be zero. Bit 0 is 1
+ when asynchronous page faults are enabled on the vcpu 0 when
+ disabled. Bit 1 is 1 if asynchronous page faults can be injected
+ when vcpu is in cpl == 0.
+
+ First 4 byte of 64 byte memory location will be written to by
+ the hypervisor at the time of asynchronous page fault (APF)
+ injection to indicate type of asynchronous page fault. Value
+ of 1 means that the page referred to by the page fault is not
+ present. Value 2 means that the page is now available. Disabling
+ interrupt inhibits APFs. Guest must not enable interrupt
+ before the reason is read, or it may be overwritten by another
+ APF. Since APF uses the same exception vector as regular page
+ fault guest must reset the reason to 0 before it does
+ something that can generate normal page fault. If during page
+ fault APF reason is 0 it means that this is regular page
+ fault.
+
+ During delivery of type 1 APF cr2 contains a token that will
+ be used to notify a guest when missing page becomes
+ available. When page becomes available type 2 APF is sent with
+ cr2 set to the token associated with the page. There is special
+ kind of token 0xffffffff which tells vcpu that it should wake
+ up all processes waiting for APFs and no individual type 2 APFs
+ will be sent.
+
+ If APF is disabled while there are outstanding APFs, they will
+ not be delivered.
+
+ Currently type 2 APF will be always delivered on the same vcpu as
+ type 1 was, but guest should not rely on that.
+
+MSR_KVM_STEAL_TIME: 0x4b564d03
+
+ data: 64-byte alignment physical address of a memory area which must be
+ in guest RAM, plus an enable bit in bit 0. This memory is expected to
+ hold a copy of the following structure:
+
+ struct kvm_steal_time {
+ __u64 steal;
+ __u32 version;
+ __u32 flags;
+ __u32 pad[12];
+ }
+
+ whose data will be filled in by the hypervisor periodically. Only one
+ write, or registration, is needed for each VCPU. The interval between
+ updates of this structure is arbitrary and implementation-dependent.
+ The hypervisor may update this structure at any time it sees fit until
+ anything with bit0 == 0 is written to it. Guest is required to make sure
+ this structure is initialized to zero.
+
+ Fields have the following meanings:
+
+ version: a sequence counter. In other words, guest has to check
+ this field before and after grabbing time information and make
+ sure they are both equal and even. An odd version indicates an
+ in-progress update.
+
+ flags: At this point, always zero. May be used to indicate
+ changes in this structure in the future.
+
+ steal: the amount of time in which this vCPU did not run, in
+ nanoseconds. Time during which the vcpu is idle, will not be
+ reported as steal time.
+
+MSR_KVM_EOI_EN: 0x4b564d04
+ data: Bit 0 is 1 when PV end of interrupt is enabled on the vcpu; 0
+ when disabled. Bit 1 is reserved and must be zero. When PV end of
+ interrupt is enabled (bit 0 set), bits 63-2 hold a 4-byte aligned
+ physical address of a 4 byte memory area which must be in guest RAM and
+ must be zeroed.
+
+ The first, least significant bit of 4 byte memory location will be
+ written to by the hypervisor, typically at the time of interrupt
+ injection. Value of 1 means that guest can skip writing EOI to the apic
+ (using MSR or MMIO write); instead, it is sufficient to signal
+ EOI by clearing the bit in guest memory - this location will
+ later be polled by the hypervisor.
+ Value of 0 means that the EOI write is required.
+
+ It is always safe for the guest to ignore the optimization and perform
+ the APIC EOI write anyway.
+
+ Hypervisor is guaranteed to only modify this least
+ significant bit while in the current VCPU context, this means that
+ guest does not need to use either lock prefix or memory ordering
+ primitives to synchronise with the hypervisor.
+
+ However, hypervisor can set and clear this memory bit at any time:
+ therefore to make sure hypervisor does not interrupt the
+ guest and clear the least significant bit in the memory area
+ in the window between guest testing it to detect
+ whether it can skip EOI apic write and between guest
+ clearing it to signal EOI to the hypervisor,
+ guest must both read the least significant bit in the memory area and
+ clear it using a single CPU instruction, such as test and clear, or
+ compare and exchange.
diff --git a/kernel/Documentation/virtual/kvm/nested-vmx.txt b/kernel/Documentation/virtual/kvm/nested-vmx.txt
new file mode 100644
index 000000000..8ed937de1
--- /dev/null
+++ b/kernel/Documentation/virtual/kvm/nested-vmx.txt
@@ -0,0 +1,251 @@
+Nested VMX
+==========
+
+Overview
+---------
+
+On Intel processors, KVM uses Intel's VMX (Virtual-Machine eXtensions)
+to easily and efficiently run guest operating systems. Normally, these guests
+*cannot* themselves be hypervisors running their own guests, because in VMX,
+guests cannot use VMX instructions.
+
+The "Nested VMX" feature adds this missing capability - of running guest
+hypervisors (which use VMX) with their own nested guests. It does so by
+allowing a guest to use VMX instructions, and correctly and efficiently
+emulating them using the single level of VMX available in the hardware.
+
+We describe in much greater detail the theory behind the nested VMX feature,
+its implementation and its performance characteristics, in the OSDI 2010 paper
+"The Turtles Project: Design and Implementation of Nested Virtualization",
+available at:
+
+ http://www.usenix.org/events/osdi10/tech/full_papers/Ben-Yehuda.pdf
+
+
+Terminology
+-----------
+
+Single-level virtualization has two levels - the host (KVM) and the guests.
+In nested virtualization, we have three levels: The host (KVM), which we call
+L0, the guest hypervisor, which we call L1, and its nested guest, which we
+call L2.
+
+
+Known limitations
+-----------------
+
+The current code supports running Linux guests under KVM guests.
+Only 64-bit guest hypervisors are supported.
+
+Additional patches for running Windows under guest KVM, and Linux under
+guest VMware server, and support for nested EPT, are currently running in
+the lab, and will be sent as follow-on patchsets.
+
+
+Running nested VMX
+------------------
+
+The nested VMX feature is disabled by default. It can be enabled by giving
+the "nested=1" option to the kvm-intel module.
+
+No modifications are required to user space (qemu). However, qemu's default
+emulated CPU type (qemu64) does not list the "VMX" CPU feature, so it must be
+explicitly enabled, by giving qemu one of the following options:
+
+ -cpu host (emulated CPU has all features of the real CPU)
+
+ -cpu qemu64,+vmx (add just the vmx feature to a named CPU type)
+
+
+ABIs
+----
+
+Nested VMX aims to present a standard and (eventually) fully-functional VMX
+implementation for the a guest hypervisor to use. As such, the official
+specification of the ABI that it provides is Intel's VMX specification,
+namely volume 3B of their "Intel 64 and IA-32 Architectures Software
+Developer's Manual". Not all of VMX's features are currently fully supported,
+but the goal is to eventually support them all, starting with the VMX features
+which are used in practice by popular hypervisors (KVM and others).
+
+As a VMX implementation, nested VMX presents a VMCS structure to L1.
+As mandated by the spec, other than the two fields revision_id and abort,
+this structure is *opaque* to its user, who is not supposed to know or care
+about its internal structure. Rather, the structure is accessed through the
+VMREAD and VMWRITE instructions.
+Still, for debugging purposes, KVM developers might be interested to know the
+internals of this structure; This is struct vmcs12 from arch/x86/kvm/vmx.c.
+
+The name "vmcs12" refers to the VMCS that L1 builds for L2. In the code we
+also have "vmcs01", the VMCS that L0 built for L1, and "vmcs02" is the VMCS
+which L0 builds to actually run L2 - how this is done is explained in the
+aforementioned paper.
+
+For convenience, we repeat the content of struct vmcs12 here. If the internals
+of this structure changes, this can break live migration across KVM versions.
+VMCS12_REVISION (from vmx.c) should be changed if struct vmcs12 or its inner
+struct shadow_vmcs is ever changed.
+
+ typedef u64 natural_width;
+ struct __packed vmcs12 {
+ /* According to the Intel spec, a VMCS region must start with
+ * these two user-visible fields */
+ u32 revision_id;
+ u32 abort;
+
+ u32 launch_state; /* set to 0 by VMCLEAR, to 1 by VMLAUNCH */
+ u32 padding[7]; /* room for future expansion */
+
+ u64 io_bitmap_a;
+ u64 io_bitmap_b;
+ u64 msr_bitmap;
+ u64 vm_exit_msr_store_addr;
+ u64 vm_exit_msr_load_addr;
+ u64 vm_entry_msr_load_addr;
+ u64 tsc_offset;
+ u64 virtual_apic_page_addr;
+ u64 apic_access_addr;
+ u64 ept_pointer;
+ u64 guest_physical_address;
+ u64 vmcs_link_pointer;
+ u64 guest_ia32_debugctl;
+ u64 guest_ia32_pat;
+ u64 guest_ia32_efer;
+ u64 guest_pdptr0;
+ u64 guest_pdptr1;
+ u64 guest_pdptr2;
+ u64 guest_pdptr3;
+ u64 host_ia32_pat;
+ u64 host_ia32_efer;
+ u64 padding64[8]; /* room for future expansion */
+ natural_width cr0_guest_host_mask;
+ natural_width cr4_guest_host_mask;
+ natural_width cr0_read_shadow;
+ natural_width cr4_read_shadow;
+ natural_width cr3_target_value0;
+ natural_width cr3_target_value1;
+ natural_width cr3_target_value2;
+ natural_width cr3_target_value3;
+ natural_width exit_qualification;
+ natural_width guest_linear_address;
+ natural_width guest_cr0;
+ natural_width guest_cr3;
+ natural_width guest_cr4;
+ natural_width guest_es_base;
+ natural_width guest_cs_base;
+ natural_width guest_ss_base;
+ natural_width guest_ds_base;
+ natural_width guest_fs_base;
+ natural_width guest_gs_base;
+ natural_width guest_ldtr_base;
+ natural_width guest_tr_base;
+ natural_width guest_gdtr_base;
+ natural_width guest_idtr_base;
+ natural_width guest_dr7;
+ natural_width guest_rsp;
+ natural_width guest_rip;
+ natural_width guest_rflags;
+ natural_width guest_pending_dbg_exceptions;
+ natural_width guest_sysenter_esp;
+ natural_width guest_sysenter_eip;
+ natural_width host_cr0;
+ natural_width host_cr3;
+ natural_width host_cr4;
+ natural_width host_fs_base;
+ natural_width host_gs_base;
+ natural_width host_tr_base;
+ natural_width host_gdtr_base;
+ natural_width host_idtr_base;
+ natural_width host_ia32_sysenter_esp;
+ natural_width host_ia32_sysenter_eip;
+ natural_width host_rsp;
+ natural_width host_rip;
+ natural_width paddingl[8]; /* room for future expansion */
+ u32 pin_based_vm_exec_control;
+ u32 cpu_based_vm_exec_control;
+ u32 exception_bitmap;
+ u32 page_fault_error_code_mask;
+ u32 page_fault_error_code_match;
+ u32 cr3_target_count;
+ u32 vm_exit_controls;
+ u32 vm_exit_msr_store_count;
+ u32 vm_exit_msr_load_count;
+ u32 vm_entry_controls;
+ u32 vm_entry_msr_load_count;
+ u32 vm_entry_intr_info_field;
+ u32 vm_entry_exception_error_code;
+ u32 vm_entry_instruction_len;
+ u32 tpr_threshold;
+ u32 secondary_vm_exec_control;
+ u32 vm_instruction_error;
+ u32 vm_exit_reason;
+ u32 vm_exit_intr_info;
+ u32 vm_exit_intr_error_code;
+ u32 idt_vectoring_info_field;
+ u32 idt_vectoring_error_code;
+ u32 vm_exit_instruction_len;
+ u32 vmx_instruction_info;
+ u32 guest_es_limit;
+ u32 guest_cs_limit;
+ u32 guest_ss_limit;
+ u32 guest_ds_limit;
+ u32 guest_fs_limit;
+ u32 guest_gs_limit;
+ u32 guest_ldtr_limit;
+ u32 guest_tr_limit;
+ u32 guest_gdtr_limit;
+ u32 guest_idtr_limit;
+ u32 guest_es_ar_bytes;
+ u32 guest_cs_ar_bytes;
+ u32 guest_ss_ar_bytes;
+ u32 guest_ds_ar_bytes;
+ u32 guest_fs_ar_bytes;
+ u32 guest_gs_ar_bytes;
+ u32 guest_ldtr_ar_bytes;
+ u32 guest_tr_ar_bytes;
+ u32 guest_interruptibility_info;
+ u32 guest_activity_state;
+ u32 guest_sysenter_cs;
+ u32 host_ia32_sysenter_cs;
+ u32 padding32[8]; /* room for future expansion */
+ u16 virtual_processor_id;
+ u16 guest_es_selector;
+ u16 guest_cs_selector;
+ u16 guest_ss_selector;
+ u16 guest_ds_selector;
+ u16 guest_fs_selector;
+ u16 guest_gs_selector;
+ u16 guest_ldtr_selector;
+ u16 guest_tr_selector;
+ u16 host_es_selector;
+ u16 host_cs_selector;
+ u16 host_ss_selector;
+ u16 host_ds_selector;
+ u16 host_fs_selector;
+ u16 host_gs_selector;
+ u16 host_tr_selector;
+ };
+
+
+Authors
+-------
+
+These patches were written by:
+ Abel Gordon, abelg <at> il.ibm.com
+ Nadav Har'El, nyh <at> il.ibm.com
+ Orit Wasserman, oritw <at> il.ibm.com
+ Ben-Ami Yassor, benami <at> il.ibm.com
+ Muli Ben-Yehuda, muli <at> il.ibm.com
+
+With contributions by:
+ Anthony Liguori, aliguori <at> us.ibm.com
+ Mike Day, mdday <at> us.ibm.com
+ Michael Factor, factor <at> il.ibm.com
+ Zvi Dubitzky, dubi <at> il.ibm.com
+
+And valuable reviews by:
+ Avi Kivity, avi <at> redhat.com
+ Gleb Natapov, gleb <at> redhat.com
+ Marcelo Tosatti, mtosatti <at> redhat.com
+ Kevin Tian, kevin.tian <at> intel.com
+ and others.
diff --git a/kernel/Documentation/virtual/kvm/ppc-pv.txt b/kernel/Documentation/virtual/kvm/ppc-pv.txt
new file mode 100644
index 000000000..319560646
--- /dev/null
+++ b/kernel/Documentation/virtual/kvm/ppc-pv.txt
@@ -0,0 +1,212 @@
+The PPC KVM paravirtual interface
+=================================
+
+The basic execution principle by which KVM on PowerPC works is to run all kernel
+space code in PR=1 which is user space. This way we trap all privileged
+instructions and can emulate them accordingly.
+
+Unfortunately that is also the downfall. There are quite some privileged
+instructions that needlessly return us to the hypervisor even though they
+could be handled differently.
+
+This is what the PPC PV interface helps with. It takes privileged instructions
+and transforms them into unprivileged ones with some help from the hypervisor.
+This cuts down virtualization costs by about 50% on some of my benchmarks.
+
+The code for that interface can be found in arch/powerpc/kernel/kvm*
+
+Querying for existence
+======================
+
+To find out if we're running on KVM or not, we leverage the device tree. When
+Linux is running on KVM, a node /hypervisor exists. That node contains a
+compatible property with the value "linux,kvm".
+
+Once you determined you're running under a PV capable KVM, you can now use
+hypercalls as described below.
+
+KVM hypercalls
+==============
+
+Inside the device tree's /hypervisor node there's a property called
+'hypercall-instructions'. This property contains at most 4 opcodes that make
+up the hypercall. To call a hypercall, just call these instructions.
+
+The parameters are as follows:
+
+ Register IN OUT
+
+ r0 - volatile
+ r3 1st parameter Return code
+ r4 2nd parameter 1st output value
+ r5 3rd parameter 2nd output value
+ r6 4th parameter 3rd output value
+ r7 5th parameter 4th output value
+ r8 6th parameter 5th output value
+ r9 7th parameter 6th output value
+ r10 8th parameter 7th output value
+ r11 hypercall number 8th output value
+ r12 - volatile
+
+Hypercall definitions are shared in generic code, so the same hypercall numbers
+apply for x86 and powerpc alike with the exception that each KVM hypercall
+also needs to be ORed with the KVM vendor code which is (42 << 16).
+
+Return codes can be as follows:
+
+ Code Meaning
+
+ 0 Success
+ 12 Hypercall not implemented
+ <0 Error
+
+The magic page
+==============
+
+To enable communication between the hypervisor and guest there is a new shared
+page that contains parts of supervisor visible register state. The guest can
+map this shared page using the KVM hypercall KVM_HC_PPC_MAP_MAGIC_PAGE.
+
+With this hypercall issued the guest always gets the magic page mapped at the
+desired location. The first parameter indicates the effective address when the
+MMU is enabled. The second parameter indicates the address in real mode, if
+applicable to the target. For now, we always map the page to -4096. This way we
+can access it using absolute load and store functions. The following
+instruction reads the first field of the magic page:
+
+ ld rX, -4096(0)
+
+The interface is designed to be extensible should there be need later to add
+additional registers to the magic page. If you add fields to the magic page,
+also define a new hypercall feature to indicate that the host can give you more
+registers. Only if the host supports the additional features, make use of them.
+
+The magic page layout is described by struct kvm_vcpu_arch_shared
+in arch/powerpc/include/asm/kvm_para.h.
+
+Magic page features
+===================
+
+When mapping the magic page using the KVM hypercall KVM_HC_PPC_MAP_MAGIC_PAGE,
+a second return value is passed to the guest. This second return value contains
+a bitmap of available features inside the magic page.
+
+The following enhancements to the magic page are currently available:
+
+ KVM_MAGIC_FEAT_SR Maps SR registers r/w in the magic page
+ KVM_MAGIC_FEAT_MAS0_TO_SPRG7 Maps MASn, ESR, PIR and high SPRGs
+
+For enhanced features in the magic page, please check for the existence of the
+feature before using them!
+
+Magic page flags
+================
+
+In addition to features that indicate whether a host is capable of a particular
+feature we also have a channel for a guest to tell the guest whether it's capable
+of something. This is what we call "flags".
+
+Flags are passed to the host in the low 12 bits of the Effective Address.
+
+The following flags are currently available for a guest to expose:
+
+ MAGIC_PAGE_FLAG_NOT_MAPPED_NX Guest handles NX bits correclty wrt magic page
+
+MSR bits
+========
+
+The MSR contains bits that require hypervisor intervention and bits that do
+not require direct hypervisor intervention because they only get interpreted
+when entering the guest or don't have any impact on the hypervisor's behavior.
+
+The following bits are safe to be set inside the guest:
+
+ MSR_EE
+ MSR_RI
+
+If any other bit changes in the MSR, please still use mtmsr(d).
+
+Patched instructions
+====================
+
+The "ld" and "std" instructions are transformed to "lwz" and "stw" instructions
+respectively on 32 bit systems with an added offset of 4 to accommodate for big
+endianness.
+
+The following is a list of mapping the Linux kernel performs when running as
+guest. Implementing any of those mappings is optional, as the instruction traps
+also act on the shared page. So calling privileged instructions still works as
+before.
+
+From To
+==== ==
+
+mfmsr rX ld rX, magic_page->msr
+mfsprg rX, 0 ld rX, magic_page->sprg0
+mfsprg rX, 1 ld rX, magic_page->sprg1
+mfsprg rX, 2 ld rX, magic_page->sprg2
+mfsprg rX, 3 ld rX, magic_page->sprg3
+mfsrr0 rX ld rX, magic_page->srr0
+mfsrr1 rX ld rX, magic_page->srr1
+mfdar rX ld rX, magic_page->dar
+mfdsisr rX lwz rX, magic_page->dsisr
+
+mtmsr rX std rX, magic_page->msr
+mtsprg 0, rX std rX, magic_page->sprg0
+mtsprg 1, rX std rX, magic_page->sprg1
+mtsprg 2, rX std rX, magic_page->sprg2
+mtsprg 3, rX std rX, magic_page->sprg3
+mtsrr0 rX std rX, magic_page->srr0
+mtsrr1 rX std rX, magic_page->srr1
+mtdar rX std rX, magic_page->dar
+mtdsisr rX stw rX, magic_page->dsisr
+
+tlbsync nop
+
+mtmsrd rX, 0 b <special mtmsr section>
+mtmsr rX b <special mtmsr section>
+
+mtmsrd rX, 1 b <special mtmsrd section>
+
+[Book3S only]
+mtsrin rX, rY b <special mtsrin section>
+
+[BookE only]
+wrteei [0|1] b <special wrteei section>
+
+
+Some instructions require more logic to determine what's going on than a load
+or store instruction can deliver. To enable patching of those, we keep some
+RAM around where we can live translate instructions to. What happens is the
+following:
+
+ 1) copy emulation code to memory
+ 2) patch that code to fit the emulated instruction
+ 3) patch that code to return to the original pc + 4
+ 4) patch the original instruction to branch to the new code
+
+That way we can inject an arbitrary amount of code as replacement for a single
+instruction. This allows us to check for pending interrupts when setting EE=1
+for example.
+
+Hypercall ABIs in KVM on PowerPC
+=================================
+1) KVM hypercalls (ePAPR)
+
+These are ePAPR compliant hypercall implementation (mentioned above). Even
+generic hypercalls are implemented here, like the ePAPR idle hcall. These are
+available on all targets.
+
+2) PAPR hypercalls
+
+PAPR hypercalls are needed to run server PowerPC PAPR guests (-M pseries in QEMU).
+These are the same hypercalls that pHyp, the POWER hypervisor implements. Some of
+them are handled in the kernel, some are handled in user space. This is only
+available on book3s_64.
+
+3) OSI hypercalls
+
+Mac-on-Linux is another user of KVM on PowerPC, which has its own hypercall (long
+before KVM). This is supported to maintain compatibility. All these hypercalls get
+forwarded to user space. This is only useful on book3s_32, but can be used with
+book3s_64 as well.
diff --git a/kernel/Documentation/virtual/kvm/review-checklist.txt b/kernel/Documentation/virtual/kvm/review-checklist.txt
new file mode 100644
index 000000000..a850986ed
--- /dev/null
+++ b/kernel/Documentation/virtual/kvm/review-checklist.txt
@@ -0,0 +1,38 @@
+Review checklist for kvm patches
+================================
+
+1. The patch must follow Documentation/CodingStyle and
+ Documentation/SubmittingPatches.
+
+2. Patches should be against kvm.git master branch.
+
+3. If the patch introduces or modifies a new userspace API:
+ - the API must be documented in Documentation/virtual/kvm/api.txt
+ - the API must be discoverable using KVM_CHECK_EXTENSION
+
+4. New state must include support for save/restore.
+
+5. New features must default to off (userspace should explicitly request them).
+ Performance improvements can and should default to on.
+
+6. New cpu features should be exposed via KVM_GET_SUPPORTED_CPUID2
+
+7. Emulator changes should be accompanied by unit tests for qemu-kvm.git
+ kvm/test directory.
+
+8. Changes should be vendor neutral when possible. Changes to common code
+ are better than duplicating changes to vendor code.
+
+9. Similarly, prefer changes to arch independent code than to arch dependent
+ code.
+
+10. User/kernel interfaces and guest/host interfaces must be 64-bit clean
+ (all variables and sizes naturally aligned on 64-bit; use specific types
+ only - u64 rather than ulong).
+
+11. New guest visible features must either be documented in a hardware manual
+ or be accompanied by documentation.
+
+12. Features must be robust against reset and kexec - for example, shared
+ host/guest memory must be unshared to prevent the host from writing to
+ guest memory that the guest has not reserved for this purpose.
diff --git a/kernel/Documentation/virtual/kvm/s390-diag.txt b/kernel/Documentation/virtual/kvm/s390-diag.txt
new file mode 100644
index 000000000..48c492179
--- /dev/null
+++ b/kernel/Documentation/virtual/kvm/s390-diag.txt
@@ -0,0 +1,82 @@
+The s390 DIAGNOSE call on KVM
+=============================
+
+KVM on s390 supports the DIAGNOSE call for making hypercalls, both for
+native hypercalls and for selected hypercalls found on other s390
+hypervisors.
+
+Note that bits are numbered as by the usual s390 convention (most significant
+bit on the left).
+
+
+General remarks
+---------------
+
+DIAGNOSE calls by the guest cause a mandatory intercept. This implies
+all supported DIAGNOSE calls need to be handled by either KVM or its
+userspace.
+
+All DIAGNOSE calls supported by KVM use the RS-a format:
+
+--------------------------------------
+| '83' | R1 | R3 | B2 | D2 |
+--------------------------------------
+0 8 12 16 20 31
+
+The second-operand address (obtained by the base/displacement calculation)
+is not used to address data. Instead, bits 48-63 of this address specify
+the function code, and bits 0-47 are ignored.
+
+The supported DIAGNOSE function codes vary by the userspace used. For
+DIAGNOSE function codes not specific to KVM, please refer to the
+documentation for the s390 hypervisors defining them.
+
+
+DIAGNOSE function code 'X'500' - KVM virtio functions
+-----------------------------------------------------
+
+If the function code specifies 0x500, various virtio-related functions
+are performed.
+
+General register 1 contains the virtio subfunction code. Supported
+virtio subfunctions depend on KVM's userspace. Generally, userspace
+provides either s390-virtio (subcodes 0-2) or virtio-ccw (subcode 3).
+
+Upon completion of the DIAGNOSE instruction, general register 2 contains
+the function's return code, which is either a return code or a subcode
+specific value.
+
+Subcode 0 - s390-virtio notification and early console printk
+ Handled by userspace.
+
+Subcode 1 - s390-virtio reset
+ Handled by userspace.
+
+Subcode 2 - s390-virtio set status
+ Handled by userspace.
+
+Subcode 3 - virtio-ccw notification
+ Handled by either userspace or KVM (ioeventfd case).
+
+ General register 2 contains a subchannel-identification word denoting
+ the subchannel of the virtio-ccw proxy device to be notified.
+
+ General register 3 contains the number of the virtqueue to be notified.
+
+ General register 4 contains a 64bit identifier for KVM usage (the
+ kvm_io_bus cookie). If general register 4 does not contain a valid
+ identifier, it is ignored.
+
+ After completion of the DIAGNOSE call, general register 2 may contain
+ a 64bit identifier (in the kvm_io_bus cookie case).
+
+ See also the virtio standard for a discussion of this hypercall.
+
+
+DIAGNOSE function code 'X'501 - KVM breakpoint
+----------------------------------------------
+
+If the function code specifies 0x501, breakpoint functions may be performed.
+This function code is handled by userspace.
+
+This diagnose function code has no subfunctions and uses no parameters.
diff --git a/kernel/Documentation/virtual/kvm/timekeeping.txt b/kernel/Documentation/virtual/kvm/timekeeping.txt
new file mode 100644
index 000000000..76808a17a
--- /dev/null
+++ b/kernel/Documentation/virtual/kvm/timekeeping.txt
@@ -0,0 +1,612 @@
+
+ Timekeeping Virtualization for X86-Based Architectures
+
+ Zachary Amsden <zamsden@redhat.com>
+ Copyright (c) 2010, Red Hat. All rights reserved.
+
+1) Overview
+2) Timing Devices
+3) TSC Hardware
+4) Virtualization Problems
+
+=========================================================================
+
+1) Overview
+
+One of the most complicated parts of the X86 platform, and specifically,
+the virtualization of this platform is the plethora of timing devices available
+and the complexity of emulating those devices. In addition, virtualization of
+time introduces a new set of challenges because it introduces a multiplexed
+division of time beyond the control of the guest CPU.
+
+First, we will describe the various timekeeping hardware available, then
+present some of the problems which arise and solutions available, giving
+specific recommendations for certain classes of KVM guests.
+
+The purpose of this document is to collect data and information relevant to
+timekeeping which may be difficult to find elsewhere, specifically,
+information relevant to KVM and hardware-based virtualization.
+
+=========================================================================
+
+2) Timing Devices
+
+First we discuss the basic hardware devices available. TSC and the related
+KVM clock are special enough to warrant a full exposition and are described in
+the following section.
+
+2.1) i8254 - PIT
+
+One of the first timer devices available is the programmable interrupt timer,
+or PIT. The PIT has a fixed frequency 1.193182 MHz base clock and three
+channels which can be programmed to deliver periodic or one-shot interrupts.
+These three channels can be configured in different modes and have individual
+counters. Channel 1 and 2 were not available for general use in the original
+IBM PC, and historically were connected to control RAM refresh and the PC
+speaker. Now the PIT is typically integrated as part of an emulated chipset
+and a separate physical PIT is not used.
+
+The PIT uses I/O ports 0x40 - 0x43. Access to the 16-bit counters is done
+using single or multiple byte access to the I/O ports. There are 6 modes
+available, but not all modes are available to all timers, as only timer 2
+has a connected gate input, required for modes 1 and 5. The gate line is
+controlled by port 61h, bit 0, as illustrated in the following diagram.
+
+ -------------- ----------------
+| | | |
+| 1.1932 MHz |---------->| CLOCK OUT | ---------> IRQ 0
+| Clock | | | |
+ -------------- | +->| GATE TIMER 0 |
+ | ----------------
+ |
+ | ----------------
+ | | |
+ |------>| CLOCK OUT | ---------> 66.3 KHZ DRAM
+ | | | (aka /dev/null)
+ | +->| GATE TIMER 1 |
+ | ----------------
+ |
+ | ----------------
+ | | |
+ |------>| CLOCK OUT | ---------> Port 61h, bit 5
+ | | |
+Port 61h, bit 0 ---------->| GATE TIMER 2 | \_.---- ____
+ ---------------- _| )--|LPF|---Speaker
+ / *---- \___/
+Port 61h, bit 1 -----------------------------------/
+
+The timer modes are now described.
+
+Mode 0: Single Timeout. This is a one-shot software timeout that counts down
+ when the gate is high (always true for timers 0 and 1). When the count
+ reaches zero, the output goes high.
+
+Mode 1: Triggered One-shot. The output is initially set high. When the gate
+ line is set high, a countdown is initiated (which does not stop if the gate is
+ lowered), during which the output is set low. When the count reaches zero,
+ the output goes high.
+
+Mode 2: Rate Generator. The output is initially set high. When the countdown
+ reaches 1, the output goes low for one count and then returns high. The value
+ is reloaded and the countdown automatically resumes. If the gate line goes
+ low, the count is halted. If the output is low when the gate is lowered, the
+ output automatically goes high (this only affects timer 2).
+
+Mode 3: Square Wave. This generates a high / low square wave. The count
+ determines the length of the pulse, which alternates between high and low
+ when zero is reached. The count only proceeds when gate is high and is
+ automatically reloaded on reaching zero. The count is decremented twice at
+ each clock to generate a full high / low cycle at the full periodic rate.
+ If the count is even, the clock remains high for N/2 counts and low for N/2
+ counts; if the clock is odd, the clock is high for (N+1)/2 counts and low
+ for (N-1)/2 counts. Only even values are latched by the counter, so odd
+ values are not observed when reading. This is the intended mode for timer 2,
+ which generates sine-like tones by low-pass filtering the square wave output.
+
+Mode 4: Software Strobe. After programming this mode and loading the counter,
+ the output remains high until the counter reaches zero. Then the output
+ goes low for 1 clock cycle and returns high. The counter is not reloaded.
+ Counting only occurs when gate is high.
+
+Mode 5: Hardware Strobe. After programming and loading the counter, the
+ output remains high. When the gate is raised, a countdown is initiated
+ (which does not stop if the gate is lowered). When the counter reaches zero,
+ the output goes low for 1 clock cycle and then returns high. The counter is
+ not reloaded.
+
+In addition to normal binary counting, the PIT supports BCD counting. The
+command port, 0x43 is used to set the counter and mode for each of the three
+timers.
+
+PIT commands, issued to port 0x43, using the following bit encoding:
+
+Bit 7-4: Command (See table below)
+Bit 3-1: Mode (000 = Mode 0, 101 = Mode 5, 11X = undefined)
+Bit 0 : Binary (0) / BCD (1)
+
+Command table:
+
+0000 - Latch Timer 0 count for port 0x40
+ sample and hold the count to be read in port 0x40;
+ additional commands ignored until counter is read;
+ mode bits ignored.
+
+0001 - Set Timer 0 LSB mode for port 0x40
+ set timer to read LSB only and force MSB to zero;
+ mode bits set timer mode
+
+0010 - Set Timer 0 MSB mode for port 0x40
+ set timer to read MSB only and force LSB to zero;
+ mode bits set timer mode
+
+0011 - Set Timer 0 16-bit mode for port 0x40
+ set timer to read / write LSB first, then MSB;
+ mode bits set timer mode
+
+0100 - Latch Timer 1 count for port 0x41 - as described above
+0101 - Set Timer 1 LSB mode for port 0x41 - as described above
+0110 - Set Timer 1 MSB mode for port 0x41 - as described above
+0111 - Set Timer 1 16-bit mode for port 0x41 - as described above
+
+1000 - Latch Timer 2 count for port 0x42 - as described above
+1001 - Set Timer 2 LSB mode for port 0x42 - as described above
+1010 - Set Timer 2 MSB mode for port 0x42 - as described above
+1011 - Set Timer 2 16-bit mode for port 0x42 as described above
+
+1101 - General counter latch
+ Latch combination of counters into corresponding ports
+ Bit 3 = Counter 2
+ Bit 2 = Counter 1
+ Bit 1 = Counter 0
+ Bit 0 = Unused
+
+1110 - Latch timer status
+ Latch combination of counter mode into corresponding ports
+ Bit 3 = Counter 2
+ Bit 2 = Counter 1
+ Bit 1 = Counter 0
+
+ The output of ports 0x40-0x42 following this command will be:
+
+ Bit 7 = Output pin
+ Bit 6 = Count loaded (0 if timer has expired)
+ Bit 5-4 = Read / Write mode
+ 01 = MSB only
+ 10 = LSB only
+ 11 = LSB / MSB (16-bit)
+ Bit 3-1 = Mode
+ Bit 0 = Binary (0) / BCD mode (1)
+
+2.2) RTC
+
+The second device which was available in the original PC was the MC146818 real
+time clock. The original device is now obsolete, and usually emulated by the
+system chipset, sometimes by an HPET and some frankenstein IRQ routing.
+
+The RTC is accessed through CMOS variables, which uses an index register to
+control which bytes are read. Since there is only one index register, read
+of the CMOS and read of the RTC require lock protection (in addition, it is
+dangerous to allow userspace utilities such as hwclock to have direct RTC
+access, as they could corrupt kernel reads and writes of CMOS memory).
+
+The RTC generates an interrupt which is usually routed to IRQ 8. The interrupt
+can function as a periodic timer, an additional once a day alarm, and can issue
+interrupts after an update of the CMOS registers by the MC146818 is complete.
+The type of interrupt is signalled in the RTC status registers.
+
+The RTC will update the current time fields by battery power even while the
+system is off. The current time fields should not be read while an update is
+in progress, as indicated in the status register.
+
+The clock uses a 32.768kHz crystal, so bits 6-4 of register A should be
+programmed to a 32kHz divider if the RTC is to count seconds.
+
+This is the RAM map originally used for the RTC/CMOS:
+
+Location Size Description
+------------------------------------------
+00h byte Current second (BCD)
+01h byte Seconds alarm (BCD)
+02h byte Current minute (BCD)
+03h byte Minutes alarm (BCD)
+04h byte Current hour (BCD)
+05h byte Hours alarm (BCD)
+06h byte Current day of week (BCD)
+07h byte Current day of month (BCD)
+08h byte Current month (BCD)
+09h byte Current year (BCD)
+0Ah byte Register A
+ bit 7 = Update in progress
+ bit 6-4 = Divider for clock
+ 000 = 4.194 MHz
+ 001 = 1.049 MHz
+ 010 = 32 kHz
+ 10X = test modes
+ 110 = reset / disable
+ 111 = reset / disable
+ bit 3-0 = Rate selection for periodic interrupt
+ 000 = periodic timer disabled
+ 001 = 3.90625 uS
+ 010 = 7.8125 uS
+ 011 = .122070 mS
+ 100 = .244141 mS
+ ...
+ 1101 = 125 mS
+ 1110 = 250 mS
+ 1111 = 500 mS
+0Bh byte Register B
+ bit 7 = Run (0) / Halt (1)
+ bit 6 = Periodic interrupt enable
+ bit 5 = Alarm interrupt enable
+ bit 4 = Update-ended interrupt enable
+ bit 3 = Square wave interrupt enable
+ bit 2 = BCD calendar (0) / Binary (1)
+ bit 1 = 12-hour mode (0) / 24-hour mode (1)
+ bit 0 = 0 (DST off) / 1 (DST enabled)
+OCh byte Register C (read only)
+ bit 7 = interrupt request flag (IRQF)
+ bit 6 = periodic interrupt flag (PF)
+ bit 5 = alarm interrupt flag (AF)
+ bit 4 = update interrupt flag (UF)
+ bit 3-0 = reserved
+ODh byte Register D (read only)
+ bit 7 = RTC has power
+ bit 6-0 = reserved
+32h byte Current century BCD (*)
+ (*) location vendor specific and now determined from ACPI global tables
+
+2.3) APIC
+
+On Pentium and later processors, an on-board timer is available to each CPU
+as part of the Advanced Programmable Interrupt Controller. The APIC is
+accessed through memory-mapped registers and provides interrupt service to each
+CPU, used for IPIs and local timer interrupts.
+
+Although in theory the APIC is a safe and stable source for local interrupts,
+in practice, many bugs and glitches have occurred due to the special nature of
+the APIC CPU-local memory-mapped hardware. Beware that CPU errata may affect
+the use of the APIC and that workarounds may be required. In addition, some of
+these workarounds pose unique constraints for virtualization - requiring either
+extra overhead incurred from extra reads of memory-mapped I/O or additional
+functionality that may be more computationally expensive to implement.
+
+Since the APIC is documented quite well in the Intel and AMD manuals, we will
+avoid repetition of the detail here. It should be pointed out that the APIC
+timer is programmed through the LVT (local vector timer) register, is capable
+of one-shot or periodic operation, and is based on the bus clock divided down
+by the programmable divider register.
+
+2.4) HPET
+
+HPET is quite complex, and was originally intended to replace the PIT / RTC
+support of the X86 PC. It remains to be seen whether that will be the case, as
+the de facto standard of PC hardware is to emulate these older devices. Some
+systems designated as legacy free may support only the HPET as a hardware timer
+device.
+
+The HPET spec is rather loose and vague, requiring at least 3 hardware timers,
+but allowing implementation freedom to support many more. It also imposes no
+fixed rate on the timer frequency, but does impose some extremal values on
+frequency, error and slew.
+
+In general, the HPET is recommended as a high precision (compared to PIT /RTC)
+time source which is independent of local variation (as there is only one HPET
+in any given system). The HPET is also memory-mapped, and its presence is
+indicated through ACPI tables by the BIOS.
+
+Detailed specification of the HPET is beyond the current scope of this
+document, as it is also very well documented elsewhere.
+
+2.5) Offboard Timers
+
+Several cards, both proprietary (watchdog boards) and commonplace (e1000) have
+timing chips built into the cards which may have registers which are accessible
+to kernel or user drivers. To the author's knowledge, using these to generate
+a clocksource for a Linux or other kernel has not yet been attempted and is in
+general frowned upon as not playing by the agreed rules of the game. Such a
+timer device would require additional support to be virtualized properly and is
+not considered important at this time as no known operating system does this.
+
+=========================================================================
+
+3) TSC Hardware
+
+The TSC or time stamp counter is relatively simple in theory; it counts
+instruction cycles issued by the processor, which can be used as a measure of
+time. In practice, due to a number of problems, it is the most complicated
+timekeeping device to use.
+
+The TSC is represented internally as a 64-bit MSR which can be read with the
+RDMSR, RDTSC, or RDTSCP (when available) instructions. In the past, hardware
+limitations made it possible to write the TSC, but generally on old hardware it
+was only possible to write the low 32-bits of the 64-bit counter, and the upper
+32-bits of the counter were cleared. Now, however, on Intel processors family
+0Fh, for models 3, 4 and 6, and family 06h, models e and f, this restriction
+has been lifted and all 64-bits are writable. On AMD systems, the ability to
+write the TSC MSR is not an architectural guarantee.
+
+The TSC is accessible from CPL-0 and conditionally, for CPL > 0 software by
+means of the CR4.TSD bit, which when enabled, disables CPL > 0 TSC access.
+
+Some vendors have implemented an additional instruction, RDTSCP, which returns
+atomically not just the TSC, but an indicator which corresponds to the
+processor number. This can be used to index into an array of TSC variables to
+determine offset information in SMP systems where TSCs are not synchronized.
+The presence of this instruction must be determined by consulting CPUID feature
+bits.
+
+Both VMX and SVM provide extension fields in the virtualization hardware which
+allows the guest visible TSC to be offset by a constant. Newer implementations
+promise to allow the TSC to additionally be scaled, but this hardware is not
+yet widely available.
+
+3.1) TSC synchronization
+
+The TSC is a CPU-local clock in most implementations. This means, on SMP
+platforms, the TSCs of different CPUs may start at different times depending
+on when the CPUs are powered on. Generally, CPUs on the same die will share
+the same clock, however, this is not always the case.
+
+The BIOS may attempt to resynchronize the TSCs during the poweron process and
+the operating system or other system software may attempt to do this as well.
+Several hardware limitations make the problem worse - if it is not possible to
+write the full 64-bits of the TSC, it may be impossible to match the TSC in
+newly arriving CPUs to that of the rest of the system, resulting in
+unsynchronized TSCs. This may be done by BIOS or system software, but in
+practice, getting a perfectly synchronized TSC will not be possible unless all
+values are read from the same clock, which generally only is possible on single
+socket systems or those with special hardware support.
+
+3.2) TSC and CPU hotplug
+
+As touched on already, CPUs which arrive later than the boot time of the system
+may not have a TSC value that is synchronized with the rest of the system.
+Either system software, BIOS, or SMM code may actually try to establish the TSC
+to a value matching the rest of the system, but a perfect match is usually not
+a guarantee. This can have the effect of bringing a system from a state where
+TSC is synchronized back to a state where TSC synchronization flaws, however
+small, may be exposed to the OS and any virtualization environment.
+
+3.3) TSC and multi-socket / NUMA
+
+Multi-socket systems, especially large multi-socket systems are likely to have
+individual clocksources rather than a single, universally distributed clock.
+Since these clocks are driven by different crystals, they will not have
+perfectly matched frequency, and temperature and electrical variations will
+cause the CPU clocks, and thus the TSCs to drift over time. Depending on the
+exact clock and bus design, the drift may or may not be fixed in absolute
+error, and may accumulate over time.
+
+In addition, very large systems may deliberately slew the clocks of individual
+cores. This technique, known as spread-spectrum clocking, reduces EMI at the
+clock frequency and harmonics of it, which may be required to pass FCC
+standards for telecommunications and computer equipment.
+
+It is recommended not to trust the TSCs to remain synchronized on NUMA or
+multiple socket systems for these reasons.
+
+3.4) TSC and C-states
+
+C-states, or idling states of the processor, especially C1E and deeper sleep
+states may be problematic for TSC as well. The TSC may stop advancing in such
+a state, resulting in a TSC which is behind that of other CPUs when execution
+is resumed. Such CPUs must be detected and flagged by the operating system
+based on CPU and chipset identifications.
+
+The TSC in such a case may be corrected by catching it up to a known external
+clocksource.
+
+3.5) TSC frequency change / P-states
+
+To make things slightly more interesting, some CPUs may change frequency. They
+may or may not run the TSC at the same rate, and because the frequency change
+may be staggered or slewed, at some points in time, the TSC rate may not be
+known other than falling within a range of values. In this case, the TSC will
+not be a stable time source, and must be calibrated against a known, stable,
+external clock to be a usable source of time.
+
+Whether the TSC runs at a constant rate or scales with the P-state is model
+dependent and must be determined by inspecting CPUID, chipset or vendor
+specific MSR fields.
+
+In addition, some vendors have known bugs where the P-state is actually
+compensated for properly during normal operation, but when the processor is
+inactive, the P-state may be raised temporarily to service cache misses from
+other processors. In such cases, the TSC on halted CPUs could advance faster
+than that of non-halted processors. AMD Turion processors are known to have
+this problem.
+
+3.6) TSC and STPCLK / T-states
+
+External signals given to the processor may also have the effect of stopping
+the TSC. This is typically done for thermal emergency power control to prevent
+an overheating condition, and typically, there is no way to detect that this
+condition has happened.
+
+3.7) TSC virtualization - VMX
+
+VMX provides conditional trapping of RDTSC, RDMSR, WRMSR and RDTSCP
+instructions, which is enough for full virtualization of TSC in any manner. In
+addition, VMX allows passing through the host TSC plus an additional TSC_OFFSET
+field specified in the VMCS. Special instructions must be used to read and
+write the VMCS field.
+
+3.8) TSC virtualization - SVM
+
+SVM provides conditional trapping of RDTSC, RDMSR, WRMSR and RDTSCP
+instructions, which is enough for full virtualization of TSC in any manner. In
+addition, SVM allows passing through the host TSC plus an additional offset
+field specified in the SVM control block.
+
+3.9) TSC feature bits in Linux
+
+In summary, there is no way to guarantee the TSC remains in perfect
+synchronization unless it is explicitly guaranteed by the architecture. Even
+if so, the TSCs in multi-sockets or NUMA systems may still run independently
+despite being locally consistent.
+
+The following feature bits are used by Linux to signal various TSC attributes,
+but they can only be taken to be meaningful for UP or single node systems.
+
+X86_FEATURE_TSC : The TSC is available in hardware
+X86_FEATURE_RDTSCP : The RDTSCP instruction is available
+X86_FEATURE_CONSTANT_TSC : The TSC rate is unchanged with P-states
+X86_FEATURE_NONSTOP_TSC : The TSC does not stop in C-states
+X86_FEATURE_TSC_RELIABLE : TSC sync checks are skipped (VMware)
+
+4) Virtualization Problems
+
+Timekeeping is especially problematic for virtualization because a number of
+challenges arise. The most obvious problem is that time is now shared between
+the host and, potentially, a number of virtual machines. Thus the virtual
+operating system does not run with 100% usage of the CPU, despite the fact that
+it may very well make that assumption. It may expect it to remain true to very
+exacting bounds when interrupt sources are disabled, but in reality only its
+virtual interrupt sources are disabled, and the machine may still be preempted
+at any time. This causes problems as the passage of real time, the injection
+of machine interrupts and the associated clock sources are no longer completely
+synchronized with real time.
+
+This same problem can occur on native hardware to a degree, as SMM mode may
+steal cycles from the naturally on X86 systems when SMM mode is used by the
+BIOS, but not in such an extreme fashion. However, the fact that SMM mode may
+cause similar problems to virtualization makes it a good justification for
+solving many of these problems on bare metal.
+
+4.1) Interrupt clocking
+
+One of the most immediate problems that occurs with legacy operating systems
+is that the system timekeeping routines are often designed to keep track of
+time by counting periodic interrupts. These interrupts may come from the PIT
+or the RTC, but the problem is the same: the host virtualization engine may not
+be able to deliver the proper number of interrupts per second, and so guest
+time may fall behind. This is especially problematic if a high interrupt rate
+is selected, such as 1000 HZ, which is unfortunately the default for many Linux
+guests.
+
+There are three approaches to solving this problem; first, it may be possible
+to simply ignore it. Guests which have a separate time source for tracking
+'wall clock' or 'real time' may not need any adjustment of their interrupts to
+maintain proper time. If this is not sufficient, it may be necessary to inject
+additional interrupts into the guest in order to increase the effective
+interrupt rate. This approach leads to complications in extreme conditions,
+where host load or guest lag is too much to compensate for, and thus another
+solution to the problem has risen: the guest may need to become aware of lost
+ticks and compensate for them internally. Although promising in theory, the
+implementation of this policy in Linux has been extremely error prone, and a
+number of buggy variants of lost tick compensation are distributed across
+commonly used Linux systems.
+
+Windows uses periodic RTC clocking as a means of keeping time internally, and
+thus requires interrupt slewing to keep proper time. It does use a low enough
+rate (ed: is it 18.2 Hz?) however that it has not yet been a problem in
+practice.
+
+4.2) TSC sampling and serialization
+
+As the highest precision time source available, the cycle counter of the CPU
+has aroused much interest from developers. As explained above, this timer has
+many problems unique to its nature as a local, potentially unstable and
+potentially unsynchronized source. One issue which is not unique to the TSC,
+but is highlighted because of its very precise nature is sampling delay. By
+definition, the counter, once read is already old. However, it is also
+possible for the counter to be read ahead of the actual use of the result.
+This is a consequence of the superscalar execution of the instruction stream,
+which may execute instructions out of order. Such execution is called
+non-serialized. Forcing serialized execution is necessary for precise
+measurement with the TSC, and requires a serializing instruction, such as CPUID
+or an MSR read.
+
+Since CPUID may actually be virtualized by a trap and emulate mechanism, this
+serialization can pose a performance issue for hardware virtualization. An
+accurate time stamp counter reading may therefore not always be available, and
+it may be necessary for an implementation to guard against "backwards" reads of
+the TSC as seen from other CPUs, even in an otherwise perfectly synchronized
+system.
+
+4.3) Timespec aliasing
+
+Additionally, this lack of serialization from the TSC poses another challenge
+when using results of the TSC when measured against another time source. As
+the TSC is much higher precision, many possible values of the TSC may be read
+while another clock is still expressing the same value.
+
+That is, you may read (T,T+10) while external clock C maintains the same value.
+Due to non-serialized reads, you may actually end up with a range which
+fluctuates - from (T-1.. T+10). Thus, any time calculated from a TSC, but
+calibrated against an external value may have a range of valid values.
+Re-calibrating this computation may actually cause time, as computed after the
+calibration, to go backwards, compared with time computed before the
+calibration.
+
+This problem is particularly pronounced with an internal time source in Linux,
+the kernel time, which is expressed in the theoretically high resolution
+timespec - but which advances in much larger granularity intervals, sometimes
+at the rate of jiffies, and possibly in catchup modes, at a much larger step.
+
+This aliasing requires care in the computation and recalibration of kvmclock
+and any other values derived from TSC computation (such as TSC virtualization
+itself).
+
+4.4) Migration
+
+Migration of a virtual machine raises problems for timekeeping in two ways.
+First, the migration itself may take time, during which interrupts cannot be
+delivered, and after which, the guest time may need to be caught up. NTP may
+be able to help to some degree here, as the clock correction required is
+typically small enough to fall in the NTP-correctable window.
+
+An additional concern is that timers based off the TSC (or HPET, if the raw bus
+clock is exposed) may now be running at different rates, requiring compensation
+in some way in the hypervisor by virtualizing these timers. In addition,
+migrating to a faster machine may preclude the use of a passthrough TSC, as a
+faster clock cannot be made visible to a guest without the potential of time
+advancing faster than usual. A slower clock is less of a problem, as it can
+always be caught up to the original rate. KVM clock avoids these problems by
+simply storing multipliers and offsets against the TSC for the guest to convert
+back into nanosecond resolution values.
+
+4.5) Scheduling
+
+Since scheduling may be based on precise timing and firing of interrupts, the
+scheduling algorithms of an operating system may be adversely affected by
+virtualization. In theory, the effect is random and should be universally
+distributed, but in contrived as well as real scenarios (guest device access,
+causes of virtualization exits, possible context switch), this may not always
+be the case. The effect of this has not been well studied.
+
+In an attempt to work around this, several implementations have provided a
+paravirtualized scheduler clock, which reveals the true amount of CPU time for
+which a virtual machine has been running.
+
+4.6) Watchdogs
+
+Watchdog timers, such as the lock detector in Linux may fire accidentally when
+running under hardware virtualization due to timer interrupts being delayed or
+misinterpretation of the passage of real time. Usually, these warnings are
+spurious and can be ignored, but in some circumstances it may be necessary to
+disable such detection.
+
+4.7) Delays and precision timing
+
+Precise timing and delays may not be possible in a virtualized system. This
+can happen if the system is controlling physical hardware, or issues delays to
+compensate for slower I/O to and from devices. The first issue is not solvable
+in general for a virtualized system; hardware control software can't be
+adequately virtualized without a full real-time operating system, which would
+require an RT aware virtualization platform.
+
+The second issue may cause performance problems, but this is unlikely to be a
+significant issue. In many cases these delays may be eliminated through
+configuration or paravirtualization.
+
+4.8) Covert channels and leaks
+
+In addition to the above problems, time information will inevitably leak to the
+guest about the host in anything but a perfect implementation of virtualized
+time. This may allow the guest to infer the presence of a hypervisor (as in a
+red-pill type detection), and it may allow information to leak between guests
+by using CPU utilization itself as a signalling channel. Preventing such
+problems would require completely isolated virtual time which may not track
+real time any longer. This may be useful in certain security or QA contexts,
+but in general isn't recommended for real-world deployment scenarios.