summaryrefslogtreecommitdiffstats
path: root/kernel/Documentation/usb/dma.txt
diff options
context:
space:
mode:
Diffstat (limited to 'kernel/Documentation/usb/dma.txt')
-rw-r--r--kernel/Documentation/usb/dma.txt133
1 files changed, 133 insertions, 0 deletions
diff --git a/kernel/Documentation/usb/dma.txt b/kernel/Documentation/usb/dma.txt
new file mode 100644
index 000000000..444651e70
--- /dev/null
+++ b/kernel/Documentation/usb/dma.txt
@@ -0,0 +1,133 @@
+In Linux 2.5 kernels (and later), USB device drivers have additional control
+over how DMA may be used to perform I/O operations. The APIs are detailed
+in the kernel usb programming guide (kerneldoc, from the source code).
+
+
+API OVERVIEW
+
+The big picture is that USB drivers can continue to ignore most DMA issues,
+though they still must provide DMA-ready buffers (see
+Documentation/DMA-API-HOWTO.txt). That's how they've worked through
+the 2.4 (and earlier) kernels.
+
+OR: they can now be DMA-aware.
+
+- New calls enable DMA-aware drivers, letting them allocate dma buffers and
+ manage dma mappings for existing dma-ready buffers (see below).
+
+- URBs have an additional "transfer_dma" field, as well as a transfer_flags
+ bit saying if it's valid. (Control requests also have "setup_dma", but
+ drivers must not use it.)
+
+- "usbcore" will map this DMA address, if a DMA-aware driver didn't do
+ it first and set URB_NO_TRANSFER_DMA_MAP. HCDs
+ don't manage dma mappings for URBs.
+
+- There's a new "generic DMA API", parts of which are usable by USB device
+ drivers. Never use dma_set_mask() on any USB interface or device; that
+ would potentially break all devices sharing that bus.
+
+
+ELIMINATING COPIES
+
+It's good to avoid making CPUs copy data needlessly. The costs can add up,
+and effects like cache-trashing can impose subtle penalties.
+
+- If you're doing lots of small data transfers from the same buffer all
+ the time, that can really burn up resources on systems which use an
+ IOMMU to manage the DMA mappings. It can cost MUCH more to set up and
+ tear down the IOMMU mappings with each request than perform the I/O!
+
+ For those specific cases, USB has primitives to allocate less expensive
+ memory. They work like kmalloc and kfree versions that give you the right
+ kind of addresses to store in urb->transfer_buffer and urb->transfer_dma.
+ You'd also set URB_NO_TRANSFER_DMA_MAP in urb->transfer_flags:
+
+ void *usb_alloc_coherent (struct usb_device *dev, size_t size,
+ int mem_flags, dma_addr_t *dma);
+
+ void usb_free_coherent (struct usb_device *dev, size_t size,
+ void *addr, dma_addr_t dma);
+
+ Most drivers should *NOT* be using these primitives; they don't need
+ to use this type of memory ("dma-coherent"), and memory returned from
+ kmalloc() will work just fine.
+
+ The memory buffer returned is "dma-coherent"; sometimes you might need to
+ force a consistent memory access ordering by using memory barriers. It's
+ not using a streaming DMA mapping, so it's good for small transfers on
+ systems where the I/O would otherwise thrash an IOMMU mapping. (See
+ Documentation/DMA-API-HOWTO.txt for definitions of "coherent" and
+ "streaming" DMA mappings.)
+
+ Asking for 1/Nth of a page (as well as asking for N pages) is reasonably
+ space-efficient.
+
+ On most systems the memory returned will be uncached, because the
+ semantics of dma-coherent memory require either bypassing CPU caches
+ or using cache hardware with bus-snooping support. While x86 hardware
+ has such bus-snooping, many other systems use software to flush cache
+ lines to prevent DMA conflicts.
+
+- Devices on some EHCI controllers could handle DMA to/from high memory.
+
+ Unfortunately, the current Linux DMA infrastructure doesn't have a sane
+ way to expose these capabilities ... and in any case, HIGHMEM is mostly a
+ design wart specific to x86_32. So your best bet is to ensure you never
+ pass a highmem buffer into a USB driver. That's easy; it's the default
+ behavior. Just don't override it; e.g. with NETIF_F_HIGHDMA.
+
+ This may force your callers to do some bounce buffering, copying from
+ high memory to "normal" DMA memory. If you can come up with a good way
+ to fix this issue (for x86_32 machines with over 1 GByte of memory),
+ feel free to submit patches.
+
+
+WORKING WITH EXISTING BUFFERS
+
+Existing buffers aren't usable for DMA without first being mapped into the
+DMA address space of the device. However, most buffers passed to your
+driver can safely be used with such DMA mapping. (See the first section
+of Documentation/DMA-API-HOWTO.txt, titled "What memory is DMA-able?")
+
+- When you're using scatterlists, you can map everything at once. On some
+ systems, this kicks in an IOMMU and turns the scatterlists into single
+ DMA transactions:
+
+ int usb_buffer_map_sg (struct usb_device *dev, unsigned pipe,
+ struct scatterlist *sg, int nents);
+
+ void usb_buffer_dmasync_sg (struct usb_device *dev, unsigned pipe,
+ struct scatterlist *sg, int n_hw_ents);
+
+ void usb_buffer_unmap_sg (struct usb_device *dev, unsigned pipe,
+ struct scatterlist *sg, int n_hw_ents);
+
+ It's probably easier to use the new usb_sg_*() calls, which do the DMA
+ mapping and apply other tweaks to make scatterlist i/o be fast.
+
+- Some drivers may prefer to work with the model that they're mapping large
+ buffers, synchronizing their safe re-use. (If there's no re-use, then let
+ usbcore do the map/unmap.) Large periodic transfers make good examples
+ here, since it's cheaper to just synchronize the buffer than to unmap it
+ each time an urb completes and then re-map it on during resubmission.
+
+ These calls all work with initialized urbs: urb->dev, urb->pipe,
+ urb->transfer_buffer, and urb->transfer_buffer_length must all be
+ valid when these calls are used (urb->setup_packet must be valid too
+ if urb is a control request):
+
+ struct urb *usb_buffer_map (struct urb *urb);
+
+ void usb_buffer_dmasync (struct urb *urb);
+
+ void usb_buffer_unmap (struct urb *urb);
+
+ The calls manage urb->transfer_dma for you, and set URB_NO_TRANSFER_DMA_MAP
+ so that usbcore won't map or unmap the buffer. They cannot be used for
+ setup_packet buffers in control requests.
+
+Note that several of those interfaces are currently commented out, since
+they don't have current users. See the source code. Other than the dmasync
+calls (where the underlying DMA primitives have changed), most of them can
+easily be commented back in if you want to use them.