diff options
Diffstat (limited to 'kernel/Documentation/trace/ftrace-design.txt')
| -rw-r--r-- | kernel/Documentation/trace/ftrace-design.txt | 382 |
1 files changed, 382 insertions, 0 deletions
diff --git a/kernel/Documentation/trace/ftrace-design.txt b/kernel/Documentation/trace/ftrace-design.txt new file mode 100644 index 000000000..dd5f916b3 --- /dev/null +++ b/kernel/Documentation/trace/ftrace-design.txt @@ -0,0 +1,382 @@ + function tracer guts + ==================== + By Mike Frysinger + +Introduction +------------ + +Here we will cover the architecture pieces that the common function tracing +code relies on for proper functioning. Things are broken down into increasing +complexity so that you can start simple and at least get basic functionality. + +Note that this focuses on architecture implementation details only. If you +want more explanation of a feature in terms of common code, review the common +ftrace.txt file. + +Ideally, everyone who wishes to retain performance while supporting tracing in +their kernel should make it all the way to dynamic ftrace support. + + +Prerequisites +------------- + +Ftrace relies on these features being implemented: + STACKTRACE_SUPPORT - implement save_stack_trace() + TRACE_IRQFLAGS_SUPPORT - implement include/asm/irqflags.h + + +HAVE_FUNCTION_TRACER +-------------------- + +You will need to implement the mcount and the ftrace_stub functions. + +The exact mcount symbol name will depend on your toolchain. Some call it +"mcount", "_mcount", or even "__mcount". You can probably figure it out by +running something like: + $ echo 'main(){}' | gcc -x c -S -o - - -pg | grep mcount + call mcount +We'll make the assumption below that the symbol is "mcount" just to keep things +nice and simple in the examples. + +Keep in mind that the ABI that is in effect inside of the mcount function is +*highly* architecture/toolchain specific. We cannot help you in this regard, +sorry. Dig up some old documentation and/or find someone more familiar than +you to bang ideas off of. Typically, register usage (argument/scratch/etc...) +is a major issue at this point, especially in relation to the location of the +mcount call (before/after function prologue). You might also want to look at +how glibc has implemented the mcount function for your architecture. It might +be (semi-)relevant. + +The mcount function should check the function pointer ftrace_trace_function +to see if it is set to ftrace_stub. If it is, there is nothing for you to do, +so return immediately. If it isn't, then call that function in the same way +the mcount function normally calls __mcount_internal -- the first argument is +the "frompc" while the second argument is the "selfpc" (adjusted to remove the +size of the mcount call that is embedded in the function). + +For example, if the function foo() calls bar(), when the bar() function calls +mcount(), the arguments mcount() will pass to the tracer are: + "frompc" - the address bar() will use to return to foo() + "selfpc" - the address bar() (with mcount() size adjustment) + +Also keep in mind that this mcount function will be called *a lot*, so +optimizing for the default case of no tracer will help the smooth running of +your system when tracing is disabled. So the start of the mcount function is +typically the bare minimum with checking things before returning. That also +means the code flow should usually be kept linear (i.e. no branching in the nop +case). This is of course an optimization and not a hard requirement. + +Here is some pseudo code that should help (these functions should actually be +implemented in assembly): + +void ftrace_stub(void) +{ + return; +} + +void mcount(void) +{ + /* save any bare state needed in order to do initial checking */ + + extern void (*ftrace_trace_function)(unsigned long, unsigned long); + if (ftrace_trace_function != ftrace_stub) + goto do_trace; + + /* restore any bare state */ + + return; + +do_trace: + + /* save all state needed by the ABI (see paragraph above) */ + + unsigned long frompc = ...; + unsigned long selfpc = <return address> - MCOUNT_INSN_SIZE; + ftrace_trace_function(frompc, selfpc); + + /* restore all state needed by the ABI */ +} + +Don't forget to export mcount for modules ! +extern void mcount(void); +EXPORT_SYMBOL(mcount); + + +HAVE_FUNCTION_GRAPH_TRACER +-------------------------- + +Deep breath ... time to do some real work. Here you will need to update the +mcount function to check ftrace graph function pointers, as well as implement +some functions to save (hijack) and restore the return address. + +The mcount function should check the function pointers ftrace_graph_return +(compare to ftrace_stub) and ftrace_graph_entry (compare to +ftrace_graph_entry_stub). If either of those is not set to the relevant stub +function, call the arch-specific function ftrace_graph_caller which in turn +calls the arch-specific function prepare_ftrace_return. Neither of these +function names is strictly required, but you should use them anyway to stay +consistent across the architecture ports -- easier to compare & contrast +things. + +The arguments to prepare_ftrace_return are slightly different than what are +passed to ftrace_trace_function. The second argument "selfpc" is the same, +but the first argument should be a pointer to the "frompc". Typically this is +located on the stack. This allows the function to hijack the return address +temporarily to have it point to the arch-specific function return_to_handler. +That function will simply call the common ftrace_return_to_handler function and +that will return the original return address with which you can return to the +original call site. + +Here is the updated mcount pseudo code: +void mcount(void) +{ +... + if (ftrace_trace_function != ftrace_stub) + goto do_trace; + ++#ifdef CONFIG_FUNCTION_GRAPH_TRACER ++ extern void (*ftrace_graph_return)(...); ++ extern void (*ftrace_graph_entry)(...); ++ if (ftrace_graph_return != ftrace_stub || ++ ftrace_graph_entry != ftrace_graph_entry_stub) ++ ftrace_graph_caller(); ++#endif + + /* restore any bare state */ +... + +Here is the pseudo code for the new ftrace_graph_caller assembly function: +#ifdef CONFIG_FUNCTION_GRAPH_TRACER +void ftrace_graph_caller(void) +{ + /* save all state needed by the ABI */ + + unsigned long *frompc = &...; + unsigned long selfpc = <return address> - MCOUNT_INSN_SIZE; + /* passing frame pointer up is optional -- see below */ + prepare_ftrace_return(frompc, selfpc, frame_pointer); + + /* restore all state needed by the ABI */ +} +#endif + +For information on how to implement prepare_ftrace_return(), simply look at the +x86 version (the frame pointer passing is optional; see the next section for +more information). The only architecture-specific piece in it is the setup of +the fault recovery table (the asm(...) code). The rest should be the same +across architectures. + +Here is the pseudo code for the new return_to_handler assembly function. Note +that the ABI that applies here is different from what applies to the mcount +code. Since you are returning from a function (after the epilogue), you might +be able to skimp on things saved/restored (usually just registers used to pass +return values). + +#ifdef CONFIG_FUNCTION_GRAPH_TRACER +void return_to_handler(void) +{ + /* save all state needed by the ABI (see paragraph above) */ + + void (*original_return_point)(void) = ftrace_return_to_handler(); + + /* restore all state needed by the ABI */ + + /* this is usually either a return or a jump */ + original_return_point(); +} +#endif + + +HAVE_FUNCTION_GRAPH_FP_TEST +--------------------------- + +An arch may pass in a unique value (frame pointer) to both the entering and +exiting of a function. On exit, the value is compared and if it does not +match, then it will panic the kernel. This is largely a sanity check for bad +code generation with gcc. If gcc for your port sanely updates the frame +pointer under different optimization levels, then ignore this option. + +However, adding support for it isn't terribly difficult. In your assembly code +that calls prepare_ftrace_return(), pass the frame pointer as the 3rd argument. +Then in the C version of that function, do what the x86 port does and pass it +along to ftrace_push_return_trace() instead of a stub value of 0. + +Similarly, when you call ftrace_return_to_handler(), pass it the frame pointer. + + +HAVE_FTRACE_NMI_ENTER +--------------------- + +If you can't trace NMI functions, then skip this option. + +<details to be filled> + + +HAVE_SYSCALL_TRACEPOINTS +------------------------ + +You need very few things to get the syscalls tracing in an arch. + +- Support HAVE_ARCH_TRACEHOOK (see arch/Kconfig). +- Have a NR_syscalls variable in <asm/unistd.h> that provides the number + of syscalls supported by the arch. +- Support the TIF_SYSCALL_TRACEPOINT thread flags. +- Put the trace_sys_enter() and trace_sys_exit() tracepoints calls from ptrace + in the ptrace syscalls tracing path. +- If the system call table on this arch is more complicated than a simple array + of addresses of the system calls, implement an arch_syscall_addr to return + the address of a given system call. +- If the symbol names of the system calls do not match the function names on + this arch, define ARCH_HAS_SYSCALL_MATCH_SYM_NAME in asm/ftrace.h and + implement arch_syscall_match_sym_name with the appropriate logic to return + true if the function name corresponds with the symbol name. +- Tag this arch as HAVE_SYSCALL_TRACEPOINTS. + + +HAVE_FTRACE_MCOUNT_RECORD +------------------------- + +See scripts/recordmcount.pl for more info. Just fill in the arch-specific +details for how to locate the addresses of mcount call sites via objdump. +This option doesn't make much sense without also implementing dynamic ftrace. + + +HAVE_DYNAMIC_FTRACE +------------------- + +You will first need HAVE_FTRACE_MCOUNT_RECORD and HAVE_FUNCTION_TRACER, so +scroll your reader back up if you got over eager. + +Once those are out of the way, you will need to implement: + - asm/ftrace.h: + - MCOUNT_ADDR + - ftrace_call_adjust() + - struct dyn_arch_ftrace{} + - asm code: + - mcount() (new stub) + - ftrace_caller() + - ftrace_call() + - ftrace_stub() + - C code: + - ftrace_dyn_arch_init() + - ftrace_make_nop() + - ftrace_make_call() + - ftrace_update_ftrace_func() + +First you will need to fill out some arch details in your asm/ftrace.h. + +Define MCOUNT_ADDR as the address of your mcount symbol similar to: + #define MCOUNT_ADDR ((unsigned long)mcount) +Since no one else will have a decl for that function, you will need to: + extern void mcount(void); + +You will also need the helper function ftrace_call_adjust(). Most people +will be able to stub it out like so: + static inline unsigned long ftrace_call_adjust(unsigned long addr) + { + return addr; + } +<details to be filled> + +Lastly you will need the custom dyn_arch_ftrace structure. If you need +some extra state when runtime patching arbitrary call sites, this is the +place. For now though, create an empty struct: + struct dyn_arch_ftrace { + /* No extra data needed */ + }; + +With the header out of the way, we can fill out the assembly code. While we +did already create a mcount() function earlier, dynamic ftrace only wants a +stub function. This is because the mcount() will only be used during boot +and then all references to it will be patched out never to return. Instead, +the guts of the old mcount() will be used to create a new ftrace_caller() +function. Because the two are hard to merge, it will most likely be a lot +easier to have two separate definitions split up by #ifdefs. Same goes for +the ftrace_stub() as that will now be inlined in ftrace_caller(). + +Before we get confused anymore, let's check out some pseudo code so you can +implement your own stuff in assembly: + +void mcount(void) +{ + return; +} + +void ftrace_caller(void) +{ + /* save all state needed by the ABI (see paragraph above) */ + + unsigned long frompc = ...; + unsigned long selfpc = <return address> - MCOUNT_INSN_SIZE; + +ftrace_call: + ftrace_stub(frompc, selfpc); + + /* restore all state needed by the ABI */ + +ftrace_stub: + return; +} + +This might look a little odd at first, but keep in mind that we will be runtime +patching multiple things. First, only functions that we actually want to trace +will be patched to call ftrace_caller(). Second, since we only have one tracer +active at a time, we will patch the ftrace_caller() function itself to call the +specific tracer in question. That is the point of the ftrace_call label. + +With that in mind, let's move on to the C code that will actually be doing the +runtime patching. You'll need a little knowledge of your arch's opcodes in +order to make it through the next section. + +Every arch has an init callback function. If you need to do something early on +to initialize some state, this is the time to do that. Otherwise, this simple +function below should be sufficient for most people: + +int __init ftrace_dyn_arch_init(void) +{ + return 0; +} + +There are two functions that are used to do runtime patching of arbitrary +functions. The first is used to turn the mcount call site into a nop (which +is what helps us retain runtime performance when not tracing). The second is +used to turn the mcount call site into a call to an arbitrary location (but +typically that is ftracer_caller()). See the general function definition in +linux/ftrace.h for the functions: + ftrace_make_nop() + ftrace_make_call() +The rec->ip value is the address of the mcount call site that was collected +by the scripts/recordmcount.pl during build time. + +The last function is used to do runtime patching of the active tracer. This +will be modifying the assembly code at the location of the ftrace_call symbol +inside of the ftrace_caller() function. So you should have sufficient padding +at that location to support the new function calls you'll be inserting. Some +people will be using a "call" type instruction while others will be using a +"branch" type instruction. Specifically, the function is: + ftrace_update_ftrace_func() + + +HAVE_DYNAMIC_FTRACE + HAVE_FUNCTION_GRAPH_TRACER +------------------------------------------------ + +The function grapher needs a few tweaks in order to work with dynamic ftrace. +Basically, you will need to: + - update: + - ftrace_caller() + - ftrace_graph_call() + - ftrace_graph_caller() + - implement: + - ftrace_enable_ftrace_graph_caller() + - ftrace_disable_ftrace_graph_caller() + +<details to be filled> +Quick notes: + - add a nop stub after the ftrace_call location named ftrace_graph_call; + stub needs to be large enough to support a call to ftrace_graph_caller() + - update ftrace_graph_caller() to work with being called by the new + ftrace_caller() since some semantics may have changed + - ftrace_enable_ftrace_graph_caller() will runtime patch the + ftrace_graph_call location with a call to ftrace_graph_caller() + - ftrace_disable_ftrace_graph_caller() will runtime patch the + ftrace_graph_call location with nops |