summaryrefslogtreecommitdiffstats
path: root/kernel/Documentation/scsi/hptiop.txt
diff options
context:
space:
mode:
Diffstat (limited to 'kernel/Documentation/scsi/hptiop.txt')
-rw-r--r--kernel/Documentation/scsi/hptiop.txt184
1 files changed, 184 insertions, 0 deletions
diff --git a/kernel/Documentation/scsi/hptiop.txt b/kernel/Documentation/scsi/hptiop.txt
new file mode 100644
index 000000000..12ecfd308
--- /dev/null
+++ b/kernel/Documentation/scsi/hptiop.txt
@@ -0,0 +1,184 @@
+HIGHPOINT ROCKETRAID 3xxx/4xxx ADAPTER DRIVER (hptiop)
+
+Controller Register Map
+-------------------------
+
+For RR44xx Intel IOP based adapters, the controller IOP is accessed via PCI BAR0 and BAR2:
+
+ BAR0 offset Register
+ 0x11C5C Link Interface IRQ Set
+ 0x11C60 Link Interface IRQ Clear
+
+ BAR2 offset Register
+ 0x10 Inbound Message Register 0
+ 0x14 Inbound Message Register 1
+ 0x18 Outbound Message Register 0
+ 0x1C Outbound Message Register 1
+ 0x20 Inbound Doorbell Register
+ 0x24 Inbound Interrupt Status Register
+ 0x28 Inbound Interrupt Mask Register
+ 0x30 Outbound Interrupt Status Register
+ 0x34 Outbound Interrupt Mask Register
+ 0x40 Inbound Queue Port
+ 0x44 Outbound Queue Port
+
+For Intel IOP based adapters, the controller IOP is accessed via PCI BAR0:
+
+ BAR0 offset Register
+ 0x10 Inbound Message Register 0
+ 0x14 Inbound Message Register 1
+ 0x18 Outbound Message Register 0
+ 0x1C Outbound Message Register 1
+ 0x20 Inbound Doorbell Register
+ 0x24 Inbound Interrupt Status Register
+ 0x28 Inbound Interrupt Mask Register
+ 0x30 Outbound Interrupt Status Register
+ 0x34 Outbound Interrupt Mask Register
+ 0x40 Inbound Queue Port
+ 0x44 Outbound Queue Port
+
+For Marvell not Frey IOP based adapters, the IOP is accessed via PCI BAR0 and BAR1:
+
+ BAR0 offset Register
+ 0x20400 Inbound Doorbell Register
+ 0x20404 Inbound Interrupt Mask Register
+ 0x20408 Outbound Doorbell Register
+ 0x2040C Outbound Interrupt Mask Register
+
+ BAR1 offset Register
+ 0x0 Inbound Queue Head Pointer
+ 0x4 Inbound Queue Tail Pointer
+ 0x8 Outbound Queue Head Pointer
+ 0xC Outbound Queue Tail Pointer
+ 0x10 Inbound Message Register
+ 0x14 Outbound Message Register
+ 0x40-0x1040 Inbound Queue
+ 0x1040-0x2040 Outbound Queue
+
+For Marvell Frey IOP based adapters, the IOP is accessed via PCI BAR0 and BAR1:
+
+ BAR0 offset Register
+ 0x0 IOP configuration information.
+
+ BAR1 offset Register
+ 0x4000 Inbound List Base Address Low
+ 0x4004 Inbound List Base Address High
+ 0x4018 Inbound List Write Pointer
+ 0x402C Inbound List Configuration and Control
+ 0x4050 Outbound List Base Address Low
+ 0x4054 Outbound List Base Address High
+ 0x4058 Outbound List Copy Pointer Shadow Base Address Low
+ 0x405C Outbound List Copy Pointer Shadow Base Address High
+ 0x4088 Outbound List Interrupt Cause
+ 0x408C Outbound List Interrupt Enable
+ 0x1020C PCIe Function 0 Interrupt Enable
+ 0x10400 PCIe Function 0 to CPU Message A
+ 0x10420 CPU to PCIe Function 0 Message A
+ 0x10480 CPU to PCIe Function 0 Doorbell
+ 0x10484 CPU to PCIe Function 0 Doorbell Enable
+
+
+I/O Request Workflow of Not Marvell Frey
+------------------------------------------
+
+All queued requests are handled via inbound/outbound queue port.
+A request packet can be allocated in either IOP or host memory.
+
+To send a request to the controller:
+
+ - Get a free request packet by reading the inbound queue port or
+ allocate a free request in host DMA coherent memory.
+
+ The value returned from the inbound queue port is an offset
+ relative to the IOP BAR0.
+
+ Requests allocated in host memory must be aligned on 32-bytes boundary.
+
+ - Fill the packet.
+
+ - Post the packet to IOP by writing it to inbound queue. For requests
+ allocated in IOP memory, write the offset to inbound queue port. For
+ requests allocated in host memory, write (0x80000000|(bus_addr>>5))
+ to the inbound queue port.
+
+ - The IOP process the request. When the request is completed, it
+ will be put into outbound queue. An outbound interrupt will be
+ generated.
+
+ For requests allocated in IOP memory, the request offset is posted to
+ outbound queue.
+
+ For requests allocated in host memory, (0x80000000|(bus_addr>>5))
+ is posted to the outbound queue. If IOP_REQUEST_FLAG_OUTPUT_CONTEXT
+ flag is set in the request, the low 32-bit context value will be
+ posted instead.
+
+ - The host read the outbound queue and complete the request.
+
+ For requests allocated in IOP memory, the host driver free the request
+ by writing it to the outbound queue.
+
+Non-queued requests (reset/flush etc) can be sent via inbound message
+register 0. An outbound message with the same value indicates the completion
+of an inbound message.
+
+
+I/O Request Workflow of Marvell Frey
+--------------------------------------
+
+All queued requests are handled via inbound/outbound list.
+
+To send a request to the controller:
+
+ - Allocate a free request in host DMA coherent memory.
+
+ Requests allocated in host memory must be aligned on 32-bytes boundary.
+
+ - Fill the request with index of the request in the flag.
+
+ Fill a free inbound list unit with the physical address and the size of
+ the request.
+
+ Set up the inbound list write pointer with the index of previous unit,
+ round to 0 if the index reaches the supported count of requests.
+
+ - Post the inbound list writer pointer to IOP.
+
+ - The IOP process the request. When the request is completed, the flag of
+ the request with or-ed IOPMU_QUEUE_MASK_HOST_BITS will be put into a
+ free outbound list unit and the index of the outbound list unit will be
+ put into the copy pointer shadow register. An outbound interrupt will be
+ generated.
+
+ - The host read the outbound list copy pointer shadow register and compare
+ with previous saved read pointer N. If they are different, the host will
+ read the (N+1)th outbound list unit.
+
+ The host get the index of the request from the (N+1)th outbound list
+ unit and complete the request.
+
+Non-queued requests (reset communication/reset/flush etc) can be sent via PCIe
+Function 0 to CPU Message A register. The CPU to PCIe Function 0 Message register
+with the same value indicates the completion of message.
+
+
+User-level Interface
+---------------------
+
+The driver exposes following sysfs attributes:
+
+ NAME R/W Description
+ driver-version R driver version string
+ firmware-version R firmware version string
+
+
+-----------------------------------------------------------------------------
+Copyright (C) 2006-2012 HighPoint Technologies, Inc. All Rights Reserved.
+
+ This file is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ linux@highpoint-tech.com
+ http://www.highpoint-tech.com