diff options
Diffstat (limited to 'kernel/Documentation/filesystems/vfs.txt')
| -rw-r--r-- | kernel/Documentation/filesystems/vfs.txt | 1171 |
1 files changed, 1171 insertions, 0 deletions
diff --git a/kernel/Documentation/filesystems/vfs.txt b/kernel/Documentation/filesystems/vfs.txt new file mode 100644 index 000000000..5d833b32b --- /dev/null +++ b/kernel/Documentation/filesystems/vfs.txt @@ -0,0 +1,1171 @@ + + Overview of the Linux Virtual File System + + Original author: Richard Gooch <rgooch@atnf.csiro.au> + + Last updated on June 24, 2007. + + Copyright (C) 1999 Richard Gooch + Copyright (C) 2005 Pekka Enberg + + This file is released under the GPLv2. + + +Introduction +============ + +The Virtual File System (also known as the Virtual Filesystem Switch) +is the software layer in the kernel that provides the filesystem +interface to userspace programs. It also provides an abstraction +within the kernel which allows different filesystem implementations to +coexist. + +VFS system calls open(2), stat(2), read(2), write(2), chmod(2) and so +on are called from a process context. Filesystem locking is described +in the document Documentation/filesystems/Locking. + + +Directory Entry Cache (dcache) +------------------------------ + +The VFS implements the open(2), stat(2), chmod(2), and similar system +calls. The pathname argument that is passed to them is used by the VFS +to search through the directory entry cache (also known as the dentry +cache or dcache). This provides a very fast look-up mechanism to +translate a pathname (filename) into a specific dentry. Dentries live +in RAM and are never saved to disc: they exist only for performance. + +The dentry cache is meant to be a view into your entire filespace. As +most computers cannot fit all dentries in the RAM at the same time, +some bits of the cache are missing. In order to resolve your pathname +into a dentry, the VFS may have to resort to creating dentries along +the way, and then loading the inode. This is done by looking up the +inode. + + +The Inode Object +---------------- + +An individual dentry usually has a pointer to an inode. Inodes are +filesystem objects such as regular files, directories, FIFOs and other +beasts. They live either on the disc (for block device filesystems) +or in the memory (for pseudo filesystems). Inodes that live on the +disc are copied into the memory when required and changes to the inode +are written back to disc. A single inode can be pointed to by multiple +dentries (hard links, for example, do this). + +To look up an inode requires that the VFS calls the lookup() method of +the parent directory inode. This method is installed by the specific +filesystem implementation that the inode lives in. Once the VFS has +the required dentry (and hence the inode), we can do all those boring +things like open(2) the file, or stat(2) it to peek at the inode +data. The stat(2) operation is fairly simple: once the VFS has the +dentry, it peeks at the inode data and passes some of it back to +userspace. + + +The File Object +--------------- + +Opening a file requires another operation: allocation of a file +structure (this is the kernel-side implementation of file +descriptors). The freshly allocated file structure is initialized with +a pointer to the dentry and a set of file operation member functions. +These are taken from the inode data. The open() file method is then +called so the specific filesystem implementation can do its work. You +can see that this is another switch performed by the VFS. The file +structure is placed into the file descriptor table for the process. + +Reading, writing and closing files (and other assorted VFS operations) +is done by using the userspace file descriptor to grab the appropriate +file structure, and then calling the required file structure method to +do whatever is required. For as long as the file is open, it keeps the +dentry in use, which in turn means that the VFS inode is still in use. + + +Registering and Mounting a Filesystem +===================================== + +To register and unregister a filesystem, use the following API +functions: + + #include <linux/fs.h> + + extern int register_filesystem(struct file_system_type *); + extern int unregister_filesystem(struct file_system_type *); + +The passed struct file_system_type describes your filesystem. When a +request is made to mount a filesystem onto a directory in your namespace, +the VFS will call the appropriate mount() method for the specific +filesystem. New vfsmount referring to the tree returned by ->mount() +will be attached to the mountpoint, so that when pathname resolution +reaches the mountpoint it will jump into the root of that vfsmount. + +You can see all filesystems that are registered to the kernel in the +file /proc/filesystems. + + +struct file_system_type +----------------------- + +This describes the filesystem. As of kernel 2.6.39, the following +members are defined: + +struct file_system_type { + const char *name; + int fs_flags; + struct dentry *(*mount) (struct file_system_type *, int, + const char *, void *); + void (*kill_sb) (struct super_block *); + struct module *owner; + struct file_system_type * next; + struct list_head fs_supers; + struct lock_class_key s_lock_key; + struct lock_class_key s_umount_key; +}; + + name: the name of the filesystem type, such as "ext2", "iso9660", + "msdos" and so on + + fs_flags: various flags (i.e. FS_REQUIRES_DEV, FS_NO_DCACHE, etc.) + + mount: the method to call when a new instance of this + filesystem should be mounted + + kill_sb: the method to call when an instance of this filesystem + should be shut down + + owner: for internal VFS use: you should initialize this to THIS_MODULE in + most cases. + + next: for internal VFS use: you should initialize this to NULL + + s_lock_key, s_umount_key: lockdep-specific + +The mount() method has the following arguments: + + struct file_system_type *fs_type: describes the filesystem, partly initialized + by the specific filesystem code + + int flags: mount flags + + const char *dev_name: the device name we are mounting. + + void *data: arbitrary mount options, usually comes as an ASCII + string (see "Mount Options" section) + +The mount() method must return the root dentry of the tree requested by +caller. An active reference to its superblock must be grabbed and the +superblock must be locked. On failure it should return ERR_PTR(error). + +The arguments match those of mount(2) and their interpretation +depends on filesystem type. E.g. for block filesystems, dev_name is +interpreted as block device name, that device is opened and if it +contains a suitable filesystem image the method creates and initializes +struct super_block accordingly, returning its root dentry to caller. + +->mount() may choose to return a subtree of existing filesystem - it +doesn't have to create a new one. The main result from the caller's +point of view is a reference to dentry at the root of (sub)tree to +be attached; creation of new superblock is a common side effect. + +The most interesting member of the superblock structure that the +mount() method fills in is the "s_op" field. This is a pointer to +a "struct super_operations" which describes the next level of the +filesystem implementation. + +Usually, a filesystem uses one of the generic mount() implementations +and provides a fill_super() callback instead. The generic variants are: + + mount_bdev: mount a filesystem residing on a block device + + mount_nodev: mount a filesystem that is not backed by a device + + mount_single: mount a filesystem which shares the instance between + all mounts + +A fill_super() callback implementation has the following arguments: + + struct super_block *sb: the superblock structure. The callback + must initialize this properly. + + void *data: arbitrary mount options, usually comes as an ASCII + string (see "Mount Options" section) + + int silent: whether or not to be silent on error + + +The Superblock Object +===================== + +A superblock object represents a mounted filesystem. + + +struct super_operations +----------------------- + +This describes how the VFS can manipulate the superblock of your +filesystem. As of kernel 2.6.22, the following members are defined: + +struct super_operations { + struct inode *(*alloc_inode)(struct super_block *sb); + void (*destroy_inode)(struct inode *); + + void (*dirty_inode) (struct inode *, int flags); + int (*write_inode) (struct inode *, int); + void (*drop_inode) (struct inode *); + void (*delete_inode) (struct inode *); + void (*put_super) (struct super_block *); + int (*sync_fs)(struct super_block *sb, int wait); + int (*freeze_fs) (struct super_block *); + int (*unfreeze_fs) (struct super_block *); + int (*statfs) (struct dentry *, struct kstatfs *); + int (*remount_fs) (struct super_block *, int *, char *); + void (*clear_inode) (struct inode *); + void (*umount_begin) (struct super_block *); + + int (*show_options)(struct seq_file *, struct dentry *); + + ssize_t (*quota_read)(struct super_block *, int, char *, size_t, loff_t); + ssize_t (*quota_write)(struct super_block *, int, const char *, size_t, loff_t); + int (*nr_cached_objects)(struct super_block *); + void (*free_cached_objects)(struct super_block *, int); +}; + +All methods are called without any locks being held, unless otherwise +noted. This means that most methods can block safely. All methods are +only called from a process context (i.e. not from an interrupt handler +or bottom half). + + alloc_inode: this method is called by alloc_inode() to allocate memory + for struct inode and initialize it. If this function is not + defined, a simple 'struct inode' is allocated. Normally + alloc_inode will be used to allocate a larger structure which + contains a 'struct inode' embedded within it. + + destroy_inode: this method is called by destroy_inode() to release + resources allocated for struct inode. It is only required if + ->alloc_inode was defined and simply undoes anything done by + ->alloc_inode. + + dirty_inode: this method is called by the VFS to mark an inode dirty. + + write_inode: this method is called when the VFS needs to write an + inode to disc. The second parameter indicates whether the write + should be synchronous or not, not all filesystems check this flag. + + drop_inode: called when the last access to the inode is dropped, + with the inode->i_lock spinlock held. + + This method should be either NULL (normal UNIX filesystem + semantics) or "generic_delete_inode" (for filesystems that do not + want to cache inodes - causing "delete_inode" to always be + called regardless of the value of i_nlink) + + The "generic_delete_inode()" behavior is equivalent to the + old practice of using "force_delete" in the put_inode() case, + but does not have the races that the "force_delete()" approach + had. + + delete_inode: called when the VFS wants to delete an inode + + put_super: called when the VFS wishes to free the superblock + (i.e. unmount). This is called with the superblock lock held + + sync_fs: called when VFS is writing out all dirty data associated with + a superblock. The second parameter indicates whether the method + should wait until the write out has been completed. Optional. + + freeze_fs: called when VFS is locking a filesystem and + forcing it into a consistent state. This method is currently + used by the Logical Volume Manager (LVM). + + unfreeze_fs: called when VFS is unlocking a filesystem and making it writable + again. + + statfs: called when the VFS needs to get filesystem statistics. + + remount_fs: called when the filesystem is remounted. This is called + with the kernel lock held + + clear_inode: called then the VFS clears the inode. Optional + + umount_begin: called when the VFS is unmounting a filesystem. + + show_options: called by the VFS to show mount options for + /proc/<pid>/mounts. (see "Mount Options" section) + + quota_read: called by the VFS to read from filesystem quota file. + + quota_write: called by the VFS to write to filesystem quota file. + + nr_cached_objects: called by the sb cache shrinking function for the + filesystem to return the number of freeable cached objects it contains. + Optional. + + free_cache_objects: called by the sb cache shrinking function for the + filesystem to scan the number of objects indicated to try to free them. + Optional, but any filesystem implementing this method needs to also + implement ->nr_cached_objects for it to be called correctly. + + We can't do anything with any errors that the filesystem might + encountered, hence the void return type. This will never be called if + the VM is trying to reclaim under GFP_NOFS conditions, hence this + method does not need to handle that situation itself. + + Implementations must include conditional reschedule calls inside any + scanning loop that is done. This allows the VFS to determine + appropriate scan batch sizes without having to worry about whether + implementations will cause holdoff problems due to large scan batch + sizes. + +Whoever sets up the inode is responsible for filling in the "i_op" field. This +is a pointer to a "struct inode_operations" which describes the methods that +can be performed on individual inodes. + + +The Inode Object +================ + +An inode object represents an object within the filesystem. + + +struct inode_operations +----------------------- + +This describes how the VFS can manipulate an inode in your +filesystem. As of kernel 2.6.22, the following members are defined: + +struct inode_operations { + int (*create) (struct inode *,struct dentry *, umode_t, bool); + struct dentry * (*lookup) (struct inode *,struct dentry *, unsigned int); + int (*link) (struct dentry *,struct inode *,struct dentry *); + int (*unlink) (struct inode *,struct dentry *); + int (*symlink) (struct inode *,struct dentry *,const char *); + int (*mkdir) (struct inode *,struct dentry *,umode_t); + int (*rmdir) (struct inode *,struct dentry *); + int (*mknod) (struct inode *,struct dentry *,umode_t,dev_t); + int (*rename) (struct inode *, struct dentry *, + struct inode *, struct dentry *); + int (*rename2) (struct inode *, struct dentry *, + struct inode *, struct dentry *, unsigned int); + int (*readlink) (struct dentry *, char __user *,int); + void * (*follow_link) (struct dentry *, struct nameidata *); + void (*put_link) (struct dentry *, struct nameidata *, void *); + int (*permission) (struct inode *, int); + int (*get_acl)(struct inode *, int); + int (*setattr) (struct dentry *, struct iattr *); + int (*getattr) (struct vfsmount *mnt, struct dentry *, struct kstat *); + int (*setxattr) (struct dentry *, const char *,const void *,size_t,int); + ssize_t (*getxattr) (struct dentry *, const char *, void *, size_t); + ssize_t (*listxattr) (struct dentry *, char *, size_t); + int (*removexattr) (struct dentry *, const char *); + void (*update_time)(struct inode *, struct timespec *, int); + int (*atomic_open)(struct inode *, struct dentry *, struct file *, + unsigned open_flag, umode_t create_mode, int *opened); + int (*tmpfile) (struct inode *, struct dentry *, umode_t); + int (*dentry_open)(struct dentry *, struct file *, const struct cred *); +}; + +Again, all methods are called without any locks being held, unless +otherwise noted. + + create: called by the open(2) and creat(2) system calls. Only + required if you want to support regular files. The dentry you + get should not have an inode (i.e. it should be a negative + dentry). Here you will probably call d_instantiate() with the + dentry and the newly created inode + + lookup: called when the VFS needs to look up an inode in a parent + directory. The name to look for is found in the dentry. This + method must call d_add() to insert the found inode into the + dentry. The "i_count" field in the inode structure should be + incremented. If the named inode does not exist a NULL inode + should be inserted into the dentry (this is called a negative + dentry). Returning an error code from this routine must only + be done on a real error, otherwise creating inodes with system + calls like create(2), mknod(2), mkdir(2) and so on will fail. + If you wish to overload the dentry methods then you should + initialise the "d_dop" field in the dentry; this is a pointer + to a struct "dentry_operations". + This method is called with the directory inode semaphore held + + link: called by the link(2) system call. Only required if you want + to support hard links. You will probably need to call + d_instantiate() just as you would in the create() method + + unlink: called by the unlink(2) system call. Only required if you + want to support deleting inodes + + symlink: called by the symlink(2) system call. Only required if you + want to support symlinks. You will probably need to call + d_instantiate() just as you would in the create() method + + mkdir: called by the mkdir(2) system call. Only required if you want + to support creating subdirectories. You will probably need to + call d_instantiate() just as you would in the create() method + + rmdir: called by the rmdir(2) system call. Only required if you want + to support deleting subdirectories + + mknod: called by the mknod(2) system call to create a device (char, + block) inode or a named pipe (FIFO) or socket. Only required + if you want to support creating these types of inodes. You + will probably need to call d_instantiate() just as you would + in the create() method + + rename: called by the rename(2) system call to rename the object to + have the parent and name given by the second inode and dentry. + + rename2: this has an additional flags argument compared to rename. + If no flags are supported by the filesystem then this method + need not be implemented. If some flags are supported then the + filesystem must return -EINVAL for any unsupported or unknown + flags. Currently the following flags are implemented: + (1) RENAME_NOREPLACE: this flag indicates that if the target + of the rename exists the rename should fail with -EEXIST + instead of replacing the target. The VFS already checks for + existence, so for local filesystems the RENAME_NOREPLACE + implementation is equivalent to plain rename. + (2) RENAME_EXCHANGE: exchange source and target. Both must + exist; this is checked by the VFS. Unlike plain rename, + source and target may be of different type. + + readlink: called by the readlink(2) system call. Only required if + you want to support reading symbolic links + + follow_link: called by the VFS to follow a symbolic link to the + inode it points to. Only required if you want to support + symbolic links. This method returns a void pointer cookie + that is passed to put_link(). + + put_link: called by the VFS to release resources allocated by + follow_link(). The cookie returned by follow_link() is passed + to this method as the last parameter. It is used by + filesystems such as NFS where page cache is not stable + (i.e. page that was installed when the symbolic link walk + started might not be in the page cache at the end of the + walk). + + permission: called by the VFS to check for access rights on a POSIX-like + filesystem. + + May be called in rcu-walk mode (mask & MAY_NOT_BLOCK). If in rcu-walk + mode, the filesystem must check the permission without blocking or + storing to the inode. + + If a situation is encountered that rcu-walk cannot handle, return + -ECHILD and it will be called again in ref-walk mode. + + setattr: called by the VFS to set attributes for a file. This method + is called by chmod(2) and related system calls. + + getattr: called by the VFS to get attributes of a file. This method + is called by stat(2) and related system calls. + + setxattr: called by the VFS to set an extended attribute for a file. + Extended attribute is a name:value pair associated with an + inode. This method is called by setxattr(2) system call. + + getxattr: called by the VFS to retrieve the value of an extended + attribute name. This method is called by getxattr(2) function + call. + + listxattr: called by the VFS to list all extended attributes for a + given file. This method is called by listxattr(2) system call. + + removexattr: called by the VFS to remove an extended attribute from + a file. This method is called by removexattr(2) system call. + + update_time: called by the VFS to update a specific time or the i_version of + an inode. If this is not defined the VFS will update the inode itself + and call mark_inode_dirty_sync. + + atomic_open: called on the last component of an open. Using this optional + method the filesystem can look up, possibly create and open the file in + one atomic operation. If it cannot perform this (e.g. the file type + turned out to be wrong) it may signal this by returning 1 instead of + usual 0 or -ve . This method is only called if the last component is + negative or needs lookup. Cached positive dentries are still handled by + f_op->open(). If the file was created, the FILE_CREATED flag should be + set in "opened". In case of O_EXCL the method must only succeed if the + file didn't exist and hence FILE_CREATED shall always be set on success. + + tmpfile: called in the end of O_TMPFILE open(). Optional, equivalent to + atomically creating, opening and unlinking a file in given directory. + +The Address Space Object +======================== + +The address space object is used to group and manage pages in the page +cache. It can be used to keep track of the pages in a file (or +anything else) and also track the mapping of sections of the file into +process address spaces. + +There are a number of distinct yet related services that an +address-space can provide. These include communicating memory +pressure, page lookup by address, and keeping track of pages tagged as +Dirty or Writeback. + +The first can be used independently to the others. The VM can try to +either write dirty pages in order to clean them, or release clean +pages in order to reuse them. To do this it can call the ->writepage +method on dirty pages, and ->releasepage on clean pages with +PagePrivate set. Clean pages without PagePrivate and with no external +references will be released without notice being given to the +address_space. + +To achieve this functionality, pages need to be placed on an LRU with +lru_cache_add and mark_page_active needs to be called whenever the +page is used. + +Pages are normally kept in a radix tree index by ->index. This tree +maintains information about the PG_Dirty and PG_Writeback status of +each page, so that pages with either of these flags can be found +quickly. + +The Dirty tag is primarily used by mpage_writepages - the default +->writepages method. It uses the tag to find dirty pages to call +->writepage on. If mpage_writepages is not used (i.e. the address +provides its own ->writepages) , the PAGECACHE_TAG_DIRTY tag is +almost unused. write_inode_now and sync_inode do use it (through +__sync_single_inode) to check if ->writepages has been successful in +writing out the whole address_space. + +The Writeback tag is used by filemap*wait* and sync_page* functions, +via filemap_fdatawait_range, to wait for all writeback to +complete. While waiting ->sync_page (if defined) will be called on +each page that is found to require writeback. + +An address_space handler may attach extra information to a page, +typically using the 'private' field in the 'struct page'. If such +information is attached, the PG_Private flag should be set. This will +cause various VM routines to make extra calls into the address_space +handler to deal with that data. + +An address space acts as an intermediate between storage and +application. Data is read into the address space a whole page at a +time, and provided to the application either by copying of the page, +or by memory-mapping the page. +Data is written into the address space by the application, and then +written-back to storage typically in whole pages, however the +address_space has finer control of write sizes. + +The read process essentially only requires 'readpage'. The write +process is more complicated and uses write_begin/write_end or +set_page_dirty to write data into the address_space, and writepage, +sync_page, and writepages to writeback data to storage. + +Adding and removing pages to/from an address_space is protected by the +inode's i_mutex. + +When data is written to a page, the PG_Dirty flag should be set. It +typically remains set until writepage asks for it to be written. This +should clear PG_Dirty and set PG_Writeback. It can be actually +written at any point after PG_Dirty is clear. Once it is known to be +safe, PG_Writeback is cleared. + +Writeback makes use of a writeback_control structure... + +struct address_space_operations +------------------------------- + +This describes how the VFS can manipulate mapping of a file to page cache in +your filesystem. The following members are defined: + +struct address_space_operations { + int (*writepage)(struct page *page, struct writeback_control *wbc); + int (*readpage)(struct file *, struct page *); + int (*writepages)(struct address_space *, struct writeback_control *); + int (*set_page_dirty)(struct page *page); + int (*readpages)(struct file *filp, struct address_space *mapping, + struct list_head *pages, unsigned nr_pages); + int (*write_begin)(struct file *, struct address_space *mapping, + loff_t pos, unsigned len, unsigned flags, + struct page **pagep, void **fsdata); + int (*write_end)(struct file *, struct address_space *mapping, + loff_t pos, unsigned len, unsigned copied, + struct page *page, void *fsdata); + sector_t (*bmap)(struct address_space *, sector_t); + void (*invalidatepage) (struct page *, unsigned int, unsigned int); + int (*releasepage) (struct page *, int); + void (*freepage)(struct page *); + ssize_t (*direct_IO)(struct kiocb *, struct iov_iter *iter, loff_t offset); + /* migrate the contents of a page to the specified target */ + int (*migratepage) (struct page *, struct page *); + int (*launder_page) (struct page *); + int (*is_partially_uptodate) (struct page *, unsigned long, + unsigned long); + void (*is_dirty_writeback) (struct page *, bool *, bool *); + int (*error_remove_page) (struct mapping *mapping, struct page *page); + int (*swap_activate)(struct file *); + int (*swap_deactivate)(struct file *); +}; + + writepage: called by the VM to write a dirty page to backing store. + This may happen for data integrity reasons (i.e. 'sync'), or + to free up memory (flush). The difference can be seen in + wbc->sync_mode. + The PG_Dirty flag has been cleared and PageLocked is true. + writepage should start writeout, should set PG_Writeback, + and should make sure the page is unlocked, either synchronously + or asynchronously when the write operation completes. + + If wbc->sync_mode is WB_SYNC_NONE, ->writepage doesn't have to + try too hard if there are problems, and may choose to write out + other pages from the mapping if that is easier (e.g. due to + internal dependencies). If it chooses not to start writeout, it + should return AOP_WRITEPAGE_ACTIVATE so that the VM will not keep + calling ->writepage on that page. + + See the file "Locking" for more details. + + readpage: called by the VM to read a page from backing store. + The page will be Locked when readpage is called, and should be + unlocked and marked uptodate once the read completes. + If ->readpage discovers that it needs to unlock the page for + some reason, it can do so, and then return AOP_TRUNCATED_PAGE. + In this case, the page will be relocated, relocked and if + that all succeeds, ->readpage will be called again. + + writepages: called by the VM to write out pages associated with the + address_space object. If wbc->sync_mode is WBC_SYNC_ALL, then + the writeback_control will specify a range of pages that must be + written out. If it is WBC_SYNC_NONE, then a nr_to_write is given + and that many pages should be written if possible. + If no ->writepages is given, then mpage_writepages is used + instead. This will choose pages from the address space that are + tagged as DIRTY and will pass them to ->writepage. + + set_page_dirty: called by the VM to set a page dirty. + This is particularly needed if an address space attaches + private data to a page, and that data needs to be updated when + a page is dirtied. This is called, for example, when a memory + mapped page gets modified. + If defined, it should set the PageDirty flag, and the + PAGECACHE_TAG_DIRTY tag in the radix tree. + + readpages: called by the VM to read pages associated with the address_space + object. This is essentially just a vector version of + readpage. Instead of just one page, several pages are + requested. + readpages is only used for read-ahead, so read errors are + ignored. If anything goes wrong, feel free to give up. + + write_begin: + Called by the generic buffered write code to ask the filesystem to + prepare to write len bytes at the given offset in the file. The + address_space should check that the write will be able to complete, + by allocating space if necessary and doing any other internal + housekeeping. If the write will update parts of any basic-blocks on + storage, then those blocks should be pre-read (if they haven't been + read already) so that the updated blocks can be written out properly. + + The filesystem must return the locked pagecache page for the specified + offset, in *pagep, for the caller to write into. + + It must be able to cope with short writes (where the length passed to + write_begin is greater than the number of bytes copied into the page). + + flags is a field for AOP_FLAG_xxx flags, described in + include/linux/fs.h. + + A void * may be returned in fsdata, which then gets passed into + write_end. + + Returns 0 on success; < 0 on failure (which is the error code), in + which case write_end is not called. + + write_end: After a successful write_begin, and data copy, write_end must + be called. len is the original len passed to write_begin, and copied + is the amount that was able to be copied (copied == len is always true + if write_begin was called with the AOP_FLAG_UNINTERRUPTIBLE flag). + + The filesystem must take care of unlocking the page and releasing it + refcount, and updating i_size. + + Returns < 0 on failure, otherwise the number of bytes (<= 'copied') + that were able to be copied into pagecache. + + bmap: called by the VFS to map a logical block offset within object to + physical block number. This method is used by the FIBMAP + ioctl and for working with swap-files. To be able to swap to + a file, the file must have a stable mapping to a block + device. The swap system does not go through the filesystem + but instead uses bmap to find out where the blocks in the file + are and uses those addresses directly. + + dentry_open: *WARNING: probably going away soon, do not use!* This is an + alternative to f_op->open(), the difference is that this method may open + a file not necessarily originating from the same filesystem as the one + i_op->open() was called on. It may be useful for stacking filesystems + which want to allow native I/O directly on underlying files. + + + invalidatepage: If a page has PagePrivate set, then invalidatepage + will be called when part or all of the page is to be removed + from the address space. This generally corresponds to either a + truncation, punch hole or a complete invalidation of the address + space (in the latter case 'offset' will always be 0 and 'length' + will be PAGE_CACHE_SIZE). Any private data associated with the page + should be updated to reflect this truncation. If offset is 0 and + length is PAGE_CACHE_SIZE, then the private data should be released, + because the page must be able to be completely discarded. This may + be done by calling the ->releasepage function, but in this case the + release MUST succeed. + + releasepage: releasepage is called on PagePrivate pages to indicate + that the page should be freed if possible. ->releasepage + should remove any private data from the page and clear the + PagePrivate flag. If releasepage() fails for some reason, it must + indicate failure with a 0 return value. + releasepage() is used in two distinct though related cases. The + first is when the VM finds a clean page with no active users and + wants to make it a free page. If ->releasepage succeeds, the + page will be removed from the address_space and become free. + + The second case is when a request has been made to invalidate + some or all pages in an address_space. This can happen + through the fadvice(POSIX_FADV_DONTNEED) system call or by the + filesystem explicitly requesting it as nfs and 9fs do (when + they believe the cache may be out of date with storage) by + calling invalidate_inode_pages2(). + If the filesystem makes such a call, and needs to be certain + that all pages are invalidated, then its releasepage will + need to ensure this. Possibly it can clear the PageUptodate + bit if it cannot free private data yet. + + freepage: freepage is called once the page is no longer visible in + the page cache in order to allow the cleanup of any private + data. Since it may be called by the memory reclaimer, it + should not assume that the original address_space mapping still + exists, and it should not block. + + direct_IO: called by the generic read/write routines to perform + direct_IO - that is IO requests which bypass the page cache + and transfer data directly between the storage and the + application's address space. + + migrate_page: This is used to compact the physical memory usage. + If the VM wants to relocate a page (maybe off a memory card + that is signalling imminent failure) it will pass a new page + and an old page to this function. migrate_page should + transfer any private data across and update any references + that it has to the page. + + launder_page: Called before freeing a page - it writes back the dirty page. To + prevent redirtying the page, it is kept locked during the whole + operation. + + is_partially_uptodate: Called by the VM when reading a file through the + pagecache when the underlying blocksize != pagesize. If the required + block is up to date then the read can complete without needing the IO + to bring the whole page up to date. + + is_dirty_writeback: Called by the VM when attempting to reclaim a page. + The VM uses dirty and writeback information to determine if it needs + to stall to allow flushers a chance to complete some IO. Ordinarily + it can use PageDirty and PageWriteback but some filesystems have + more complex state (unstable pages in NFS prevent reclaim) or + do not set those flags due to locking problems (jbd). This callback + allows a filesystem to indicate to the VM if a page should be + treated as dirty or writeback for the purposes of stalling. + + error_remove_page: normally set to generic_error_remove_page if truncation + is ok for this address space. Used for memory failure handling. + Setting this implies you deal with pages going away under you, + unless you have them locked or reference counts increased. + + swap_activate: Called when swapon is used on a file to allocate + space if necessary and pin the block lookup information in + memory. A return value of zero indicates success, + in which case this file can be used to back swapspace. The + swapspace operations will be proxied to this address space's + ->swap_{out,in} methods. + + swap_deactivate: Called during swapoff on files where swap_activate + was successful. + + +The File Object +=============== + +A file object represents a file opened by a process. + + +struct file_operations +---------------------- + +This describes how the VFS can manipulate an open file. As of kernel +3.12, the following members are defined: + +struct file_operations { + struct module *owner; + loff_t (*llseek) (struct file *, loff_t, int); + ssize_t (*read) (struct file *, char __user *, size_t, loff_t *); + ssize_t (*write) (struct file *, const char __user *, size_t, loff_t *); + ssize_t (*read_iter) (struct kiocb *, struct iov_iter *); + ssize_t (*write_iter) (struct kiocb *, struct iov_iter *); + int (*iterate) (struct file *, struct dir_context *); + unsigned int (*poll) (struct file *, struct poll_table_struct *); + long (*unlocked_ioctl) (struct file *, unsigned int, unsigned long); + long (*compat_ioctl) (struct file *, unsigned int, unsigned long); + int (*mmap) (struct file *, struct vm_area_struct *); + int (*open) (struct inode *, struct file *); + int (*flush) (struct file *); + int (*release) (struct inode *, struct file *); + int (*fsync) (struct file *, loff_t, loff_t, int datasync); + int (*aio_fsync) (struct kiocb *, int datasync); + int (*fasync) (int, struct file *, int); + int (*lock) (struct file *, int, struct file_lock *); + ssize_t (*sendpage) (struct file *, struct page *, int, size_t, loff_t *, int); + unsigned long (*get_unmapped_area)(struct file *, unsigned long, unsigned long, unsigned long, unsigned long); + int (*check_flags)(int); + int (*flock) (struct file *, int, struct file_lock *); + ssize_t (*splice_write)(struct pipe_inode_info *, struct file *, size_t, unsigned int); + ssize_t (*splice_read)(struct file *, struct pipe_inode_info *, size_t, unsigned int); + int (*setlease)(struct file *, long arg, struct file_lock **, void **); + long (*fallocate)(struct file *, int mode, loff_t offset, loff_t len); + void (*show_fdinfo)(struct seq_file *m, struct file *f); +}; + +Again, all methods are called without any locks being held, unless +otherwise noted. + + llseek: called when the VFS needs to move the file position index + + read: called by read(2) and related system calls + + read_iter: possibly asynchronous read with iov_iter as destination + + write: called by write(2) and related system calls + + write_iter: possibly asynchronous write with iov_iter as source + + iterate: called when the VFS needs to read the directory contents + + poll: called by the VFS when a process wants to check if there is + activity on this file and (optionally) go to sleep until there + is activity. Called by the select(2) and poll(2) system calls + + unlocked_ioctl: called by the ioctl(2) system call. + + compat_ioctl: called by the ioctl(2) system call when 32 bit system calls + are used on 64 bit kernels. + + mmap: called by the mmap(2) system call + + open: called by the VFS when an inode should be opened. When the VFS + opens a file, it creates a new "struct file". It then calls the + open method for the newly allocated file structure. You might + think that the open method really belongs in + "struct inode_operations", and you may be right. I think it's + done the way it is because it makes filesystems simpler to + implement. The open() method is a good place to initialize the + "private_data" member in the file structure if you want to point + to a device structure + + flush: called by the close(2) system call to flush a file + + release: called when the last reference to an open file is closed + + fsync: called by the fsync(2) system call + + fasync: called by the fcntl(2) system call when asynchronous + (non-blocking) mode is enabled for a file + + lock: called by the fcntl(2) system call for F_GETLK, F_SETLK, and F_SETLKW + commands + + get_unmapped_area: called by the mmap(2) system call + + check_flags: called by the fcntl(2) system call for F_SETFL command + + flock: called by the flock(2) system call + + splice_write: called by the VFS to splice data from a pipe to a file. This + method is used by the splice(2) system call + + splice_read: called by the VFS to splice data from file to a pipe. This + method is used by the splice(2) system call + + setlease: called by the VFS to set or release a file lock lease. setlease + implementations should call generic_setlease to record or remove + the lease in the inode after setting it. + + fallocate: called by the VFS to preallocate blocks or punch a hole. + +Note that the file operations are implemented by the specific +filesystem in which the inode resides. When opening a device node +(character or block special) most filesystems will call special +support routines in the VFS which will locate the required device +driver information. These support routines replace the filesystem file +operations with those for the device driver, and then proceed to call +the new open() method for the file. This is how opening a device file +in the filesystem eventually ends up calling the device driver open() +method. + + +Directory Entry Cache (dcache) +============================== + + +struct dentry_operations +------------------------ + +This describes how a filesystem can overload the standard dentry +operations. Dentries and the dcache are the domain of the VFS and the +individual filesystem implementations. Device drivers have no business +here. These methods may be set to NULL, as they are either optional or +the VFS uses a default. As of kernel 2.6.22, the following members are +defined: + +struct dentry_operations { + int (*d_revalidate)(struct dentry *, unsigned int); + int (*d_weak_revalidate)(struct dentry *, unsigned int); + int (*d_hash)(const struct dentry *, struct qstr *); + int (*d_compare)(const struct dentry *, const struct dentry *, + unsigned int, const char *, const struct qstr *); + int (*d_delete)(const struct dentry *); + void (*d_release)(struct dentry *); + void (*d_iput)(struct dentry *, struct inode *); + char *(*d_dname)(struct dentry *, char *, int); + struct vfsmount *(*d_automount)(struct path *); + int (*d_manage)(struct dentry *, bool); +}; + + d_revalidate: called when the VFS needs to revalidate a dentry. This + is called whenever a name look-up finds a dentry in the + dcache. Most local filesystems leave this as NULL, because all their + dentries in the dcache are valid. Network filesystems are different + since things can change on the server without the client necessarily + being aware of it. + + This function should return a positive value if the dentry is still + valid, and zero or a negative error code if it isn't. + + d_revalidate may be called in rcu-walk mode (flags & LOOKUP_RCU). + If in rcu-walk mode, the filesystem must revalidate the dentry without + blocking or storing to the dentry, d_parent and d_inode should not be + used without care (because they can change and, in d_inode case, even + become NULL under us). + + If a situation is encountered that rcu-walk cannot handle, return + -ECHILD and it will be called again in ref-walk mode. + + d_weak_revalidate: called when the VFS needs to revalidate a "jumped" dentry. + This is called when a path-walk ends at dentry that was not acquired by + doing a lookup in the parent directory. This includes "/", "." and "..", + as well as procfs-style symlinks and mountpoint traversal. + + In this case, we are less concerned with whether the dentry is still + fully correct, but rather that the inode is still valid. As with + d_revalidate, most local filesystems will set this to NULL since their + dcache entries are always valid. + + This function has the same return code semantics as d_revalidate. + + d_weak_revalidate is only called after leaving rcu-walk mode. + + d_hash: called when the VFS adds a dentry to the hash table. The first + dentry passed to d_hash is the parent directory that the name is + to be hashed into. + + Same locking and synchronisation rules as d_compare regarding + what is safe to dereference etc. + + d_compare: called to compare a dentry name with a given name. The first + dentry is the parent of the dentry to be compared, the second is + the child dentry. len and name string are properties of the dentry + to be compared. qstr is the name to compare it with. + + Must be constant and idempotent, and should not take locks if + possible, and should not or store into the dentry. + Should not dereference pointers outside the dentry without + lots of care (eg. d_parent, d_inode, d_name should not be used). + + However, our vfsmount is pinned, and RCU held, so the dentries and + inodes won't disappear, neither will our sb or filesystem module. + ->d_sb may be used. + + It is a tricky calling convention because it needs to be called under + "rcu-walk", ie. without any locks or references on things. + + d_delete: called when the last reference to a dentry is dropped and the + dcache is deciding whether or not to cache it. Return 1 to delete + immediately, or 0 to cache the dentry. Default is NULL which means to + always cache a reachable dentry. d_delete must be constant and + idempotent. + + d_release: called when a dentry is really deallocated + + d_iput: called when a dentry loses its inode (just prior to its + being deallocated). The default when this is NULL is that the + VFS calls iput(). If you define this method, you must call + iput() yourself + + d_dname: called when the pathname of a dentry should be generated. + Useful for some pseudo filesystems (sockfs, pipefs, ...) to delay + pathname generation. (Instead of doing it when dentry is created, + it's done only when the path is needed.). Real filesystems probably + dont want to use it, because their dentries are present in global + dcache hash, so their hash should be an invariant. As no lock is + held, d_dname() should not try to modify the dentry itself, unless + appropriate SMP safety is used. CAUTION : d_path() logic is quite + tricky. The correct way to return for example "Hello" is to put it + at the end of the buffer, and returns a pointer to the first char. + dynamic_dname() helper function is provided to take care of this. + + d_automount: called when an automount dentry is to be traversed (optional). + This should create a new VFS mount record and return the record to the + caller. The caller is supplied with a path parameter giving the + automount directory to describe the automount target and the parent + VFS mount record to provide inheritable mount parameters. NULL should + be returned if someone else managed to make the automount first. If + the vfsmount creation failed, then an error code should be returned. + If -EISDIR is returned, then the directory will be treated as an + ordinary directory and returned to pathwalk to continue walking. + + If a vfsmount is returned, the caller will attempt to mount it on the + mountpoint and will remove the vfsmount from its expiration list in + the case of failure. The vfsmount should be returned with 2 refs on + it to prevent automatic expiration - the caller will clean up the + additional ref. + + This function is only used if DCACHE_NEED_AUTOMOUNT is set on the + dentry. This is set by __d_instantiate() if S_AUTOMOUNT is set on the + inode being added. + + d_manage: called to allow the filesystem to manage the transition from a + dentry (optional). This allows autofs, for example, to hold up clients + waiting to explore behind a 'mountpoint' whilst letting the daemon go + past and construct the subtree there. 0 should be returned to let the + calling process continue. -EISDIR can be returned to tell pathwalk to + use this directory as an ordinary directory and to ignore anything + mounted on it and not to check the automount flag. Any other error + code will abort pathwalk completely. + + If the 'rcu_walk' parameter is true, then the caller is doing a + pathwalk in RCU-walk mode. Sleeping is not permitted in this mode, + and the caller can be asked to leave it and call again by returning + -ECHILD. -EISDIR may also be returned to tell pathwalk to + ignore d_automount or any mounts. + + This function is only used if DCACHE_MANAGE_TRANSIT is set on the + dentry being transited from. + +Example : + +static char *pipefs_dname(struct dentry *dent, char *buffer, int buflen) +{ + return dynamic_dname(dentry, buffer, buflen, "pipe:[%lu]", + dentry->d_inode->i_ino); +} + +Each dentry has a pointer to its parent dentry, as well as a hash list +of child dentries. Child dentries are basically like files in a +directory. + + +Directory Entry Cache API +-------------------------- + +There are a number of functions defined which permit a filesystem to +manipulate dentries: + + dget: open a new handle for an existing dentry (this just increments + the usage count) + + dput: close a handle for a dentry (decrements the usage count). If + the usage count drops to 0, and the dentry is still in its + parent's hash, the "d_delete" method is called to check whether + it should be cached. If it should not be cached, or if the dentry + is not hashed, it is deleted. Otherwise cached dentries are put + into an LRU list to be reclaimed on memory shortage. + + d_drop: this unhashes a dentry from its parents hash list. A + subsequent call to dput() will deallocate the dentry if its + usage count drops to 0 + + d_delete: delete a dentry. If there are no other open references to + the dentry then the dentry is turned into a negative dentry + (the d_iput() method is called). If there are other + references, then d_drop() is called instead + + d_add: add a dentry to its parents hash list and then calls + d_instantiate() + + d_instantiate: add a dentry to the alias hash list for the inode and + updates the "d_inode" member. The "i_count" member in the + inode structure should be set/incremented. If the inode + pointer is NULL, the dentry is called a "negative + dentry". This function is commonly called when an inode is + created for an existing negative dentry + + d_lookup: look up a dentry given its parent and path name component + It looks up the child of that given name from the dcache + hash table. If it is found, the reference count is incremented + and the dentry is returned. The caller must use dput() + to free the dentry when it finishes using it. + +Mount Options +============= + +Parsing options +--------------- + +On mount and remount the filesystem is passed a string containing a +comma separated list of mount options. The options can have either of +these forms: + + option + option=value + +The <linux/parser.h> header defines an API that helps parse these +options. There are plenty of examples on how to use it in existing +filesystems. + +Showing options +--------------- + +If a filesystem accepts mount options, it must define show_options() +to show all the currently active options. The rules are: + + - options MUST be shown which are not default or their values differ + from the default + + - options MAY be shown which are enabled by default or have their + default value + +Options used only internally between a mount helper and the kernel +(such as file descriptors), or which only have an effect during the +mounting (such as ones controlling the creation of a journal) are exempt +from the above rules. + +The underlying reason for the above rules is to make sure, that a +mount can be accurately replicated (e.g. umounting and mounting again) +based on the information found in /proc/mounts. + +A simple method of saving options at mount/remount time and showing +them is provided with the save_mount_options() and +generic_show_options() helper functions. Please note, that using +these may have drawbacks. For more info see header comments for these +functions in fs/namespace.c. + +Resources +========= + +(Note some of these resources are not up-to-date with the latest kernel + version.) + +Creating Linux virtual filesystems. 2002 + <http://lwn.net/Articles/13325/> + +The Linux Virtual File-system Layer by Neil Brown. 1999 + <http://www.cse.unsw.edu.au/~neilb/oss/linux-commentary/vfs.html> + +A tour of the Linux VFS by Michael K. Johnson. 1996 + <http://www.tldp.org/LDP/khg/HyperNews/get/fs/vfstour.html> + +A small trail through the Linux kernel by Andries Brouwer. 2001 + <http://www.win.tue.nl/~aeb/linux/vfs/trail.html> |