summaryrefslogtreecommitdiffstats
path: root/kernel/Documentation/fault-injection
diff options
context:
space:
mode:
Diffstat (limited to 'kernel/Documentation/fault-injection')
-rw-r--r--kernel/Documentation/fault-injection/fault-injection.txt269
-rw-r--r--kernel/Documentation/fault-injection/notifier-error-inject.txt99
-rw-r--r--kernel/Documentation/fault-injection/provoke-crashes.txt38
3 files changed, 406 insertions, 0 deletions
diff --git a/kernel/Documentation/fault-injection/fault-injection.txt b/kernel/Documentation/fault-injection/fault-injection.txt
new file mode 100644
index 000000000..4cf1a2a6b
--- /dev/null
+++ b/kernel/Documentation/fault-injection/fault-injection.txt
@@ -0,0 +1,269 @@
+Fault injection capabilities infrastructure
+===========================================
+
+See also drivers/md/faulty.c and "every_nth" module option for scsi_debug.
+
+
+Available fault injection capabilities
+--------------------------------------
+
+o failslab
+
+ injects slab allocation failures. (kmalloc(), kmem_cache_alloc(), ...)
+
+o fail_page_alloc
+
+ injects page allocation failures. (alloc_pages(), get_free_pages(), ...)
+
+o fail_make_request
+
+ injects disk IO errors on devices permitted by setting
+ /sys/block/<device>/make-it-fail or
+ /sys/block/<device>/<partition>/make-it-fail. (generic_make_request())
+
+o fail_mmc_request
+
+ injects MMC data errors on devices permitted by setting
+ debugfs entries under /sys/kernel/debug/mmc0/fail_mmc_request
+
+Configure fault-injection capabilities behavior
+-----------------------------------------------
+
+o debugfs entries
+
+fault-inject-debugfs kernel module provides some debugfs entries for runtime
+configuration of fault-injection capabilities.
+
+- /sys/kernel/debug/fail*/probability:
+
+ likelihood of failure injection, in percent.
+ Format: <percent>
+
+ Note that one-failure-per-hundred is a very high error rate
+ for some testcases. Consider setting probability=100 and configure
+ /sys/kernel/debug/fail*/interval for such testcases.
+
+- /sys/kernel/debug/fail*/interval:
+
+ specifies the interval between failures, for calls to
+ should_fail() that pass all the other tests.
+
+ Note that if you enable this, by setting interval>1, you will
+ probably want to set probability=100.
+
+- /sys/kernel/debug/fail*/times:
+
+ specifies how many times failures may happen at most.
+ A value of -1 means "no limit".
+
+- /sys/kernel/debug/fail*/space:
+
+ specifies an initial resource "budget", decremented by "size"
+ on each call to should_fail(,size). Failure injection is
+ suppressed until "space" reaches zero.
+
+- /sys/kernel/debug/fail*/verbose
+
+ Format: { 0 | 1 | 2 }
+ specifies the verbosity of the messages when failure is
+ injected. '0' means no messages; '1' will print only a single
+ log line per failure; '2' will print a call trace too -- useful
+ to debug the problems revealed by fault injection.
+
+- /sys/kernel/debug/fail*/task-filter:
+
+ Format: { 'Y' | 'N' }
+ A value of 'N' disables filtering by process (default).
+ Any positive value limits failures to only processes indicated by
+ /proc/<pid>/make-it-fail==1.
+
+- /sys/kernel/debug/fail*/require-start:
+- /sys/kernel/debug/fail*/require-end:
+- /sys/kernel/debug/fail*/reject-start:
+- /sys/kernel/debug/fail*/reject-end:
+
+ specifies the range of virtual addresses tested during
+ stacktrace walking. Failure is injected only if some caller
+ in the walked stacktrace lies within the required range, and
+ none lies within the rejected range.
+ Default required range is [0,ULONG_MAX) (whole of virtual address space).
+ Default rejected range is [0,0).
+
+- /sys/kernel/debug/fail*/stacktrace-depth:
+
+ specifies the maximum stacktrace depth walked during search
+ for a caller within [require-start,require-end) OR
+ [reject-start,reject-end).
+
+- /sys/kernel/debug/fail_page_alloc/ignore-gfp-highmem:
+
+ Format: { 'Y' | 'N' }
+ default is 'N', setting it to 'Y' won't inject failures into
+ highmem/user allocations.
+
+- /sys/kernel/debug/failslab/ignore-gfp-wait:
+- /sys/kernel/debug/fail_page_alloc/ignore-gfp-wait:
+
+ Format: { 'Y' | 'N' }
+ default is 'N', setting it to 'Y' will inject failures
+ only into non-sleep allocations (GFP_ATOMIC allocations).
+
+- /sys/kernel/debug/fail_page_alloc/min-order:
+
+ specifies the minimum page allocation order to be injected
+ failures.
+
+o Boot option
+
+In order to inject faults while debugfs is not available (early boot time),
+use the boot option:
+
+ failslab=
+ fail_page_alloc=
+ fail_make_request=
+ mmc_core.fail_request=<interval>,<probability>,<space>,<times>
+
+How to add new fault injection capability
+-----------------------------------------
+
+o #include <linux/fault-inject.h>
+
+o define the fault attributes
+
+ DECLARE_FAULT_INJECTION(name);
+
+ Please see the definition of struct fault_attr in fault-inject.h
+ for details.
+
+o provide a way to configure fault attributes
+
+- boot option
+
+ If you need to enable the fault injection capability from boot time, you can
+ provide boot option to configure it. There is a helper function for it:
+
+ setup_fault_attr(attr, str);
+
+- debugfs entries
+
+ failslab, fail_page_alloc, and fail_make_request use this way.
+ Helper functions:
+
+ fault_create_debugfs_attr(name, parent, attr);
+
+- module parameters
+
+ If the scope of the fault injection capability is limited to a
+ single kernel module, it is better to provide module parameters to
+ configure the fault attributes.
+
+o add a hook to insert failures
+
+ Upon should_fail() returning true, client code should inject a failure.
+
+ should_fail(attr, size);
+
+Application Examples
+--------------------
+
+o Inject slab allocation failures into module init/exit code
+
+#!/bin/bash
+
+FAILTYPE=failslab
+echo Y > /sys/kernel/debug/$FAILTYPE/task-filter
+echo 10 > /sys/kernel/debug/$FAILTYPE/probability
+echo 100 > /sys/kernel/debug/$FAILTYPE/interval
+echo -1 > /sys/kernel/debug/$FAILTYPE/times
+echo 0 > /sys/kernel/debug/$FAILTYPE/space
+echo 2 > /sys/kernel/debug/$FAILTYPE/verbose
+echo 1 > /sys/kernel/debug/$FAILTYPE/ignore-gfp-wait
+
+faulty_system()
+{
+ bash -c "echo 1 > /proc/self/make-it-fail && exec $*"
+}
+
+if [ $# -eq 0 ]
+then
+ echo "Usage: $0 modulename [ modulename ... ]"
+ exit 1
+fi
+
+for m in $*
+do
+ echo inserting $m...
+ faulty_system modprobe $m
+
+ echo removing $m...
+ faulty_system modprobe -r $m
+done
+
+------------------------------------------------------------------------------
+
+o Inject page allocation failures only for a specific module
+
+#!/bin/bash
+
+FAILTYPE=fail_page_alloc
+module=$1
+
+if [ -z $module ]
+then
+ echo "Usage: $0 <modulename>"
+ exit 1
+fi
+
+modprobe $module
+
+if [ ! -d /sys/module/$module/sections ]
+then
+ echo Module $module is not loaded
+ exit 1
+fi
+
+cat /sys/module/$module/sections/.text > /sys/kernel/debug/$FAILTYPE/require-start
+cat /sys/module/$module/sections/.data > /sys/kernel/debug/$FAILTYPE/require-end
+
+echo N > /sys/kernel/debug/$FAILTYPE/task-filter
+echo 10 > /sys/kernel/debug/$FAILTYPE/probability
+echo 100 > /sys/kernel/debug/$FAILTYPE/interval
+echo -1 > /sys/kernel/debug/$FAILTYPE/times
+echo 0 > /sys/kernel/debug/$FAILTYPE/space
+echo 2 > /sys/kernel/debug/$FAILTYPE/verbose
+echo 1 > /sys/kernel/debug/$FAILTYPE/ignore-gfp-wait
+echo 1 > /sys/kernel/debug/$FAILTYPE/ignore-gfp-highmem
+echo 10 > /sys/kernel/debug/$FAILTYPE/stacktrace-depth
+
+trap "echo 0 > /sys/kernel/debug/$FAILTYPE/probability" SIGINT SIGTERM EXIT
+
+echo "Injecting errors into the module $module... (interrupt to stop)"
+sleep 1000000
+
+Tool to run command with failslab or fail_page_alloc
+----------------------------------------------------
+In order to make it easier to accomplish the tasks mentioned above, we can use
+tools/testing/fault-injection/failcmd.sh. Please run a command
+"./tools/testing/fault-injection/failcmd.sh --help" for more information and
+see the following examples.
+
+Examples:
+
+Run a command "make -C tools/testing/selftests/ run_tests" with injecting slab
+allocation failure.
+
+ # ./tools/testing/fault-injection/failcmd.sh \
+ -- make -C tools/testing/selftests/ run_tests
+
+Same as above except to specify 100 times failures at most instead of one time
+at most by default.
+
+ # ./tools/testing/fault-injection/failcmd.sh --times=100 \
+ -- make -C tools/testing/selftests/ run_tests
+
+Same as above except to inject page allocation failure instead of slab
+allocation failure.
+
+ # env FAILCMD_TYPE=fail_page_alloc \
+ ./tools/testing/fault-injection/failcmd.sh --times=100 \
+ -- make -C tools/testing/selftests/ run_tests
diff --git a/kernel/Documentation/fault-injection/notifier-error-inject.txt b/kernel/Documentation/fault-injection/notifier-error-inject.txt
new file mode 100644
index 000000000..09adabef5
--- /dev/null
+++ b/kernel/Documentation/fault-injection/notifier-error-inject.txt
@@ -0,0 +1,99 @@
+Notifier error injection
+========================
+
+Notifier error injection provides the ability to inject artificial errors to
+specified notifier chain callbacks. It is useful to test the error handling of
+notifier call chain failures which is rarely executed. There are kernel
+modules that can be used to test the following notifiers.
+
+ * CPU notifier
+ * PM notifier
+ * Memory hotplug notifier
+ * powerpc pSeries reconfig notifier
+
+CPU notifier error injection module
+-----------------------------------
+This feature can be used to test the error handling of the CPU notifiers by
+injecting artificial errors to CPU notifier chain callbacks.
+
+If the notifier call chain should be failed with some events notified, write
+the error code to debugfs interface
+/sys/kernel/debug/notifier-error-inject/cpu/actions/<notifier event>/error
+
+Possible CPU notifier events to be failed are:
+
+ * CPU_UP_PREPARE
+ * CPU_UP_PREPARE_FROZEN
+ * CPU_DOWN_PREPARE
+ * CPU_DOWN_PREPARE_FROZEN
+
+Example1: Inject CPU offline error (-1 == -EPERM)
+
+ # cd /sys/kernel/debug/notifier-error-inject/cpu
+ # echo -1 > actions/CPU_DOWN_PREPARE/error
+ # echo 0 > /sys/devices/system/cpu/cpu1/online
+ bash: echo: write error: Operation not permitted
+
+Example2: inject CPU online error (-2 == -ENOENT)
+
+ # echo -2 > actions/CPU_UP_PREPARE/error
+ # echo 1 > /sys/devices/system/cpu/cpu1/online
+ bash: echo: write error: No such file or directory
+
+PM notifier error injection module
+----------------------------------
+This feature is controlled through debugfs interface
+/sys/kernel/debug/notifier-error-inject/pm/actions/<notifier event>/error
+
+Possible PM notifier events to be failed are:
+
+ * PM_HIBERNATION_PREPARE
+ * PM_SUSPEND_PREPARE
+ * PM_RESTORE_PREPARE
+
+Example: Inject PM suspend error (-12 = -ENOMEM)
+
+ # cd /sys/kernel/debug/notifier-error-inject/pm/
+ # echo -12 > actions/PM_SUSPEND_PREPARE/error
+ # echo mem > /sys/power/state
+ bash: echo: write error: Cannot allocate memory
+
+Memory hotplug notifier error injection module
+----------------------------------------------
+This feature is controlled through debugfs interface
+/sys/kernel/debug/notifier-error-inject/memory/actions/<notifier event>/error
+
+Possible memory notifier events to be failed are:
+
+ * MEM_GOING_ONLINE
+ * MEM_GOING_OFFLINE
+
+Example: Inject memory hotplug offline error (-12 == -ENOMEM)
+
+ # cd /sys/kernel/debug/notifier-error-inject/memory
+ # echo -12 > actions/MEM_GOING_OFFLINE/error
+ # echo offline > /sys/devices/system/memory/memoryXXX/state
+ bash: echo: write error: Cannot allocate memory
+
+powerpc pSeries reconfig notifier error injection module
+--------------------------------------------------------
+This feature is controlled through debugfs interface
+/sys/kernel/debug/notifier-error-inject/pSeries-reconfig/actions/<notifier event>/error
+
+Possible pSeries reconfig notifier events to be failed are:
+
+ * PSERIES_RECONFIG_ADD
+ * PSERIES_RECONFIG_REMOVE
+ * PSERIES_DRCONF_MEM_ADD
+ * PSERIES_DRCONF_MEM_REMOVE
+
+For more usage examples
+-----------------------
+There are tools/testing/selftests using the notifier error injection features
+for CPU and memory notifiers.
+
+ * tools/testing/selftests/cpu-hotplug/on-off-test.sh
+ * tools/testing/selftests/memory-hotplug/on-off-test.sh
+
+These scripts first do simple online and offline tests and then do fault
+injection tests if notifier error injection module is available.
diff --git a/kernel/Documentation/fault-injection/provoke-crashes.txt b/kernel/Documentation/fault-injection/provoke-crashes.txt
new file mode 100644
index 000000000..7a9d3d815
--- /dev/null
+++ b/kernel/Documentation/fault-injection/provoke-crashes.txt
@@ -0,0 +1,38 @@
+The lkdtm module provides an interface to crash or injure the kernel at
+predefined crashpoints to evaluate the reliability of crash dumps obtained
+using different dumping solutions. The module uses KPROBEs to instrument
+crashing points, but can also crash the kernel directly without KRPOBE
+support.
+
+
+You can provide the way either through module arguments when inserting
+the module, or through a debugfs interface.
+
+Usage: insmod lkdtm.ko [recur_count={>0}] cpoint_name=<> cpoint_type=<>
+ [cpoint_count={>0}]
+
+ recur_count : Recursion level for the stack overflow test. Default is 10.
+
+ cpoint_name : Crash point where the kernel is to be crashed. It can be
+ one of INT_HARDWARE_ENTRY, INT_HW_IRQ_EN, INT_TASKLET_ENTRY,
+ FS_DEVRW, MEM_SWAPOUT, TIMERADD, SCSI_DISPATCH_CMD,
+ IDE_CORE_CP, DIRECT
+
+ cpoint_type : Indicates the action to be taken on hitting the crash point.
+ It can be one of PANIC, BUG, EXCEPTION, LOOP, OVERFLOW,
+ CORRUPT_STACK, UNALIGNED_LOAD_STORE_WRITE, OVERWRITE_ALLOCATION,
+ WRITE_AFTER_FREE,
+
+ cpoint_count : Indicates the number of times the crash point is to be hit
+ to trigger an action. The default is 10.
+
+You can also induce failures by mounting debugfs and writing the type to
+<mountpoint>/provoke-crash/<crashpoint>. E.g.,
+
+ mount -t debugfs debugfs /mnt
+ echo EXCEPTION > /mnt/provoke-crash/INT_HARDWARE_ENTRY
+
+
+A special file is `DIRECT' which will induce the crash directly without
+KPROBE instrumentation. This mode is the only one available when the module
+is built on a kernel without KPROBEs support.