summaryrefslogtreecommitdiffstats
path: root/kernel/Documentation/devicetree/bindings/usb
diff options
context:
space:
mode:
Diffstat (limited to 'kernel/Documentation/devicetree/bindings/usb')
-rw-r--r--kernel/Documentation/devicetree/bindings/usb/am33xx-usb.txt197
-rw-r--r--kernel/Documentation/devicetree/bindings/usb/atmel-usb.txt142
-rw-r--r--kernel/Documentation/devicetree/bindings/usb/brcm,bcm3384-usb.txt11
-rw-r--r--kernel/Documentation/devicetree/bindings/usb/ci-hdrc-imx.txt35
-rw-r--r--kernel/Documentation/devicetree/bindings/usb/ci-hdrc-qcom.txt17
-rw-r--r--kernel/Documentation/devicetree/bindings/usb/ci-hdrc-usb2.txt24
-rw-r--r--kernel/Documentation/devicetree/bindings/usb/ci-hdrc-zevio.txt17
-rw-r--r--kernel/Documentation/devicetree/bindings/usb/dwc2.txt38
-rw-r--r--kernel/Documentation/devicetree/bindings/usb/dwc3-st.txt68
-rw-r--r--kernel/Documentation/devicetree/bindings/usb/dwc3.txt50
-rw-r--r--kernel/Documentation/devicetree/bindings/usb/ehci-omap.txt32
-rw-r--r--kernel/Documentation/devicetree/bindings/usb/ehci-orion.txt20
-rw-r--r--kernel/Documentation/devicetree/bindings/usb/ehci-st.txt39
-rw-r--r--kernel/Documentation/devicetree/bindings/usb/exynos-usb.txt117
-rw-r--r--kernel/Documentation/devicetree/bindings/usb/fsl-usb.txt83
-rw-r--r--kernel/Documentation/devicetree/bindings/usb/generic.txt24
-rw-r--r--kernel/Documentation/devicetree/bindings/usb/gr-udc.txt34
-rw-r--r--kernel/Documentation/devicetree/bindings/usb/isp1301.txt25
-rw-r--r--kernel/Documentation/devicetree/bindings/usb/keystone-phy.txt20
-rw-r--r--kernel/Documentation/devicetree/bindings/usb/keystone-usb.txt42
-rw-r--r--kernel/Documentation/devicetree/bindings/usb/lpc32xx-udc.txt28
-rw-r--r--kernel/Documentation/devicetree/bindings/usb/msm-hsusb.txt95
-rw-r--r--kernel/Documentation/devicetree/bindings/usb/mxs-phy.txt21
-rw-r--r--kernel/Documentation/devicetree/bindings/usb/nvidia,tegra20-ehci.txt23
-rw-r--r--kernel/Documentation/devicetree/bindings/usb/nvidia,tegra20-usb-phy.txt72
-rw-r--r--kernel/Documentation/devicetree/bindings/usb/ohci-nxp.txt24
-rw-r--r--kernel/Documentation/devicetree/bindings/usb/ohci-omap3.txt15
-rw-r--r--kernel/Documentation/devicetree/bindings/usb/ohci-st.txt37
-rw-r--r--kernel/Documentation/devicetree/bindings/usb/omap-usb.txt80
-rw-r--r--kernel/Documentation/devicetree/bindings/usb/pxa-usb.txt53
-rw-r--r--kernel/Documentation/devicetree/bindings/usb/qcom,dwc3.txt66
-rw-r--r--kernel/Documentation/devicetree/bindings/usb/renesas_usbhs.txt27
-rw-r--r--kernel/Documentation/devicetree/bindings/usb/samsung-hsotg.txt40
-rw-r--r--kernel/Documentation/devicetree/bindings/usb/samsung-usbphy.txt117
-rw-r--r--kernel/Documentation/devicetree/bindings/usb/spear-usb.txt39
-rw-r--r--kernel/Documentation/devicetree/bindings/usb/twlxxxx-usb.txt40
-rw-r--r--kernel/Documentation/devicetree/bindings/usb/udc-xilinx.txt18
-rw-r--r--kernel/Documentation/devicetree/bindings/usb/usb-ehci.txt38
-rw-r--r--kernel/Documentation/devicetree/bindings/usb/usb-nop-xceiv.txt41
-rw-r--r--kernel/Documentation/devicetree/bindings/usb/usb-ohci.txt28
-rw-r--r--kernel/Documentation/devicetree/bindings/usb/usb-uhci.txt15
-rw-r--r--kernel/Documentation/devicetree/bindings/usb/usb-xhci.txt21
-rw-r--r--kernel/Documentation/devicetree/bindings/usb/usb3503.txt36
-rw-r--r--kernel/Documentation/devicetree/bindings/usb/usbmisc-imx.txt16
-rw-r--r--kernel/Documentation/devicetree/bindings/usb/ux500-usb.txt50
45 files changed, 2075 insertions, 0 deletions
diff --git a/kernel/Documentation/devicetree/bindings/usb/am33xx-usb.txt b/kernel/Documentation/devicetree/bindings/usb/am33xx-usb.txt
new file mode 100644
index 000000000..20c2ff2ba
--- /dev/null
+++ b/kernel/Documentation/devicetree/bindings/usb/am33xx-usb.txt
@@ -0,0 +1,197 @@
+ AM33xx MUSB
+~~~~~~~~~~~~~~~
+- compatible: ti,am33xx-usb
+- reg: offset and length of the usbss register sets
+- ti,hwmods : must be "usb_otg_hs"
+
+The glue layer contains multiple child nodes. It is required the have
+at least a control module node, USB node and a PHY node. The second USB
+node and its PHY node is optional. The DMA node is also optional.
+
+Reset module
+~~~~~~~~~~~~
+- compatible: ti,am335x-usb-ctrl-module
+- reg: offset and length of the "USB control registers" in the "Control
+ Module" block. A second offset and length for the USB wake up control
+ in the same memory block.
+- reg-names: "phy_ctrl" for the "USB control registers" and "wakeup" for
+ the USB wake up control register.
+
+USB PHY
+~~~~~~~
+compatible: ti,am335x-usb-phy
+reg: offset and length of the "USB PHY" register space
+ti,ctrl_mod: reference to the "reset module" node
+reg-names: phy
+The PHY should have a "phy" alias numbered properly in the alias
+node.
+
+USB
+~~~
+- compatible: ti,musb-am33xx
+- reg: offset and length of "USB Controller Registers", and offset and
+ length of "USB Core" register space.
+- reg-names: control for the ""USB Controller Registers" and "mc" for
+ "USB Core" register space
+- interrupts: USB interrupt number
+- interrupt-names: mc
+- dr_mode: Should be one of "host", "peripheral" or "otg".
+- mentor,multipoint: Should be "1" indicating the musb controller supports
+ multipoint. This is a MUSB configuration-specific setting.
+- mentor,num-eps: Specifies the number of endpoints. This is also a
+ MUSB configuration-specific setting. Should be set to "16"
+- mentor,ram-bits: Specifies the ram address size. Should be set to "12"
+- mentor,power: Should be "500". This signifies the controller can supply up to
+ 500mA when operating in host mode.
+- phys: reference to the USB phy
+- dmas: specifies the dma channels
+- dma-names: specifies the names of the channels. Use "rxN" for receive
+ and "txN" for transmit endpoints. N specifies the endpoint number.
+
+The controller should have an "usb" alias numbered properly in the alias
+node.
+
+DMA
+~~~
+- compatible: ti,am3359-cppi41
+- reg: offset and length of the following register spaces: USBSS, USB
+ CPPI DMA Controller, USB CPPI DMA Scheduler, USB Queue Manager
+- reg-names: glue, controller, scheduler, queuemgr
+- #dma-cells: should be set to 2. The first number represents the
+ endpoint number (0 … 14 for endpoints 1 … 15 on instance 0 and 15 … 29
+ for endpoints 1 … 15 on instance 1). The second number is 0 for RX and
+ 1 for TX transfers.
+- #dma-channels: should be set to 30 representing the 15 endpoints for
+ each USB instance.
+
+Example:
+~~~~~~~~
+The following example contains all the nodes as used on am335x-evm:
+
+aliases {
+ usb0 = &usb0;
+ usb1 = &usb1;
+ phy0 = &usb0_phy;
+ phy1 = &usb1_phy;
+};
+
+usb: usb@47400000 {
+ compatible = "ti,am33xx-usb";
+ reg = <0x47400000 0x1000>;
+ ranges;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ti,hwmods = "usb_otg_hs";
+
+ ctrl_mod: control@44e10000 {
+ compatible = "ti,am335x-usb-ctrl-module";
+ reg = <0x44e10620 0x10
+ 0x44e10648 0x4>;
+ reg-names = "phy_ctrl", "wakeup";
+ };
+
+ usb0_phy: usb-phy@47401300 {
+ compatible = "ti,am335x-usb-phy";
+ reg = <0x47401300 0x100>;
+ reg-names = "phy";
+ ti,ctrl_mod = <&ctrl_mod>;
+ };
+
+ usb0: usb@47401000 {
+ compatible = "ti,musb-am33xx";
+ reg = <0x47401400 0x400
+ 0x47401000 0x200>;
+ reg-names = "mc", "control";
+
+ interrupts = <18>;
+ interrupt-names = "mc";
+ dr_mode = "otg"
+ mentor,multipoint = <1>;
+ mentor,num-eps = <16>;
+ mentor,ram-bits = <12>;
+ mentor,power = <500>;
+ phys = <&usb0_phy>;
+
+ dmas = <&cppi41dma 0 0 &cppi41dma 1 0
+ &cppi41dma 2 0 &cppi41dma 3 0
+ &cppi41dma 4 0 &cppi41dma 5 0
+ &cppi41dma 6 0 &cppi41dma 7 0
+ &cppi41dma 8 0 &cppi41dma 9 0
+ &cppi41dma 10 0 &cppi41dma 11 0
+ &cppi41dma 12 0 &cppi41dma 13 0
+ &cppi41dma 14 0 &cppi41dma 0 1
+ &cppi41dma 1 1 &cppi41dma 2 1
+ &cppi41dma 3 1 &cppi41dma 4 1
+ &cppi41dma 5 1 &cppi41dma 6 1
+ &cppi41dma 7 1 &cppi41dma 8 1
+ &cppi41dma 9 1 &cppi41dma 10 1
+ &cppi41dma 11 1 &cppi41dma 12 1
+ &cppi41dma 13 1 &cppi41dma 14 1>;
+ dma-names =
+ "rx1", "rx2", "rx3", "rx4", "rx5", "rx6", "rx7",
+ "rx8", "rx9", "rx10", "rx11", "rx12", "rx13",
+ "rx14", "rx15",
+ "tx1", "tx2", "tx3", "tx4", "tx5", "tx6", "tx7",
+ "tx8", "tx9", "tx10", "tx11", "tx12", "tx13",
+ "tx14", "tx15";
+ };
+
+ usb1_phy: usb-phy@47401b00 {
+ compatible = "ti,am335x-usb-phy";
+ reg = <0x47401b00 0x100>;
+ reg-names = "phy";
+ ti,ctrl_mod = <&ctrl_mod>;
+ };
+
+ usb1: usb@47401800 {
+ compatible = "ti,musb-am33xx";
+ reg = <0x47401c00 0x400
+ 0x47401800 0x200>;
+ reg-names = "mc", "control";
+ interrupts = <19>;
+ interrupt-names = "mc";
+ dr_mode = "host"
+ mentor,multipoint = <1>;
+ mentor,num-eps = <16>;
+ mentor,ram-bits = <12>;
+ mentor,power = <500>;
+ phys = <&usb1_phy>;
+
+ dmas = <&cppi41dma 15 0 &cppi41dma 16 0
+ &cppi41dma 17 0 &cppi41dma 18 0
+ &cppi41dma 19 0 &cppi41dma 20 0
+ &cppi41dma 21 0 &cppi41dma 22 0
+ &cppi41dma 23 0 &cppi41dma 24 0
+ &cppi41dma 25 0 &cppi41dma 26 0
+ &cppi41dma 27 0 &cppi41dma 28 0
+ &cppi41dma 29 0 &cppi41dma 15 1
+ &cppi41dma 16 1 &cppi41dma 17 1
+ &cppi41dma 18 1 &cppi41dma 19 1
+ &cppi41dma 20 1 &cppi41dma 21 1
+ &cppi41dma 22 1 &cppi41dma 23 1
+ &cppi41dma 24 1 &cppi41dma 25 1
+ &cppi41dma 26 1 &cppi41dma 27 1
+ &cppi41dma 28 1 &cppi41dma 29 1>;
+ dma-names =
+ "rx1", "rx2", "rx3", "rx4", "rx5", "rx6", "rx7",
+ "rx8", "rx9", "rx10", "rx11", "rx12", "rx13",
+ "rx14", "rx15",
+ "tx1", "tx2", "tx3", "tx4", "tx5", "tx6", "tx7",
+ "tx8", "tx9", "tx10", "tx11", "tx12", "tx13",
+ "tx14", "tx15";
+ };
+
+ cppi41dma: dma-controller@07402000 {
+ compatible = "ti,am3359-cppi41";
+ reg = <0x47400000 0x1000
+ 0x47402000 0x1000
+ 0x47403000 0x1000
+ 0x47404000 0x4000>;
+ reg-names = "glue", "controller", "scheduler", "queuemgr";
+ interrupts = <17>;
+ interrupt-names = "glue";
+ #dma-cells = <2>;
+ #dma-channels = <30>;
+ #dma-requests = <256>;
+ };
+};
diff --git a/kernel/Documentation/devicetree/bindings/usb/atmel-usb.txt b/kernel/Documentation/devicetree/bindings/usb/atmel-usb.txt
new file mode 100644
index 000000000..e180d56c7
--- /dev/null
+++ b/kernel/Documentation/devicetree/bindings/usb/atmel-usb.txt
@@ -0,0 +1,142 @@
+Atmel SOC USB controllers
+
+OHCI
+
+Required properties:
+ - compatible: Should be "atmel,at91rm9200-ohci" for USB controllers
+ used in host mode.
+ - num-ports: Number of ports.
+ - atmel,vbus-gpio: If present, specifies a gpio that needs to be
+ activated for the bus to be powered.
+ - atmel,oc-gpio: If present, specifies a gpio that needs to be
+ activated for the overcurrent detection.
+
+usb0: ohci@00500000 {
+ compatible = "atmel,at91rm9200-ohci", "usb-ohci";
+ reg = <0x00500000 0x100000>;
+ interrupts = <20 4>;
+ num-ports = <2>;
+};
+
+EHCI
+
+Required properties:
+ - compatible: Should be "atmel,at91sam9g45-ehci" for USB controllers
+ used in host mode.
+
+usb1: ehci@00800000 {
+ compatible = "atmel,at91sam9g45-ehci", "usb-ehci";
+ reg = <0x00800000 0x100000>;
+ interrupts = <22 4>;
+};
+
+AT91 USB device controller
+
+Required properties:
+ - compatible: Should be one of the following
+ "atmel,at91rm9200-udc"
+ "atmel,at91sam9260-udc"
+ "atmel,at91sam9261-udc"
+ "atmel,at91sam9263-udc"
+ - reg: Address and length of the register set for the device
+ - interrupts: Should contain macb interrupt
+ - clocks: Should reference the peripheral and the AHB clocks
+ - clock-names: Should contains two strings
+ "pclk" for the peripheral clock
+ "hclk" for the AHB clock
+
+Optional properties:
+ - atmel,vbus-gpio: If present, specifies a gpio that needs to be
+ activated for the bus to be powered.
+
+usb1: gadget@fffa4000 {
+ compatible = "atmel,at91rm9200-udc";
+ reg = <0xfffa4000 0x4000>;
+ interrupts = <10 4>;
+ atmel,vbus-gpio = <&pioC 5 0>;
+};
+
+Atmel High-Speed USB device controller
+
+Required properties:
+ - compatible: Should be one of the following
+ "at91sam9rl-udc"
+ "at91sam9g45-udc"
+ "sama5d3-udc"
+ - reg: Address and length of the register set for the device
+ - interrupts: Should contain usba interrupt
+ - ep childnode: To specify the number of endpoints and their properties.
+
+Optional properties:
+ - atmel,vbus-gpio: If present, specifies a gpio that allows to detect whether
+ vbus is present (USB is connected).
+
+Required child node properties:
+ - name: Name of the endpoint.
+ - reg: Num of the endpoint.
+ - atmel,fifo-size: Size of the fifo.
+ - atmel,nb-banks: Number of banks.
+ - atmel,can-dma: Boolean to specify if the endpoint support DMA.
+ - atmel,can-isoc: Boolean to specify if the endpoint support ISOC.
+
+usb2: gadget@fff78000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "atmel,at91sam9rl-udc";
+ reg = <0x00600000 0x80000
+ 0xfff78000 0x400>;
+ interrupts = <27 4 0>;
+ atmel,vbus-gpio = <&pioB 19 0>;
+
+ ep0 {
+ reg = <0>;
+ atmel,fifo-size = <64>;
+ atmel,nb-banks = <1>;
+ };
+
+ ep1 {
+ reg = <1>;
+ atmel,fifo-size = <1024>;
+ atmel,nb-banks = <2>;
+ atmel,can-dma;
+ atmel,can-isoc;
+ };
+
+ ep2 {
+ reg = <2>;
+ atmel,fifo-size = <1024>;
+ atmel,nb-banks = <2>;
+ atmel,can-dma;
+ atmel,can-isoc;
+ };
+
+ ep3 {
+ reg = <3>;
+ atmel,fifo-size = <1024>;
+ atmel,nb-banks = <3>;
+ atmel,can-dma;
+ };
+
+ ep4 {
+ reg = <4>;
+ atmel,fifo-size = <1024>;
+ atmel,nb-banks = <3>;
+ atmel,can-dma;
+ };
+
+ ep5 {
+ reg = <5>;
+ atmel,fifo-size = <1024>;
+ atmel,nb-banks = <3>;
+ atmel,can-dma;
+ atmel,can-isoc;
+ };
+
+ ep6 {
+ reg = <6>;
+ atmel,fifo-size = <1024>;
+ atmel,nb-banks = <3>;
+ atmel,can-dma;
+ atmel,can-isoc;
+ };
+};
diff --git a/kernel/Documentation/devicetree/bindings/usb/brcm,bcm3384-usb.txt b/kernel/Documentation/devicetree/bindings/usb/brcm,bcm3384-usb.txt
new file mode 100644
index 000000000..452c45c7b
--- /dev/null
+++ b/kernel/Documentation/devicetree/bindings/usb/brcm,bcm3384-usb.txt
@@ -0,0 +1,11 @@
+* Broadcom USB controllers
+
+Required properties:
+- compatible: "brcm,bcm3384-ohci", "brcm,bcm3384-ehci"
+
+ These currently use the generic-ohci and generic-ehci drivers. On some
+ systems, special handling may be needed in the following cases:
+
+ - Restoring state after systemwide power save modes
+ - Sharing PHYs with the USBD (UDC) hardware
+ - Figuring out which controllers are disabled on ASIC bondout variants
diff --git a/kernel/Documentation/devicetree/bindings/usb/ci-hdrc-imx.txt b/kernel/Documentation/devicetree/bindings/usb/ci-hdrc-imx.txt
new file mode 100644
index 000000000..38a548001
--- /dev/null
+++ b/kernel/Documentation/devicetree/bindings/usb/ci-hdrc-imx.txt
@@ -0,0 +1,35 @@
+* Freescale i.MX ci13xxx usb controllers
+
+Required properties:
+- compatible: Should be "fsl,imx27-usb"
+- reg: Should contain registers location and length
+- interrupts: Should contain controller interrupt
+- fsl,usbphy: phandle of usb phy that connects to the port
+
+Recommended properies:
+- phy_type: the type of the phy connected to the core. Should be one
+ of "utmi", "utmi_wide", "ulpi", "serial" or "hsic". Without this
+ property the PORTSC register won't be touched
+- dr_mode: One of "host", "peripheral" or "otg". Defaults to "otg"
+
+Optional properties:
+- fsl,usbmisc: phandler of non-core register device, with one argument
+ that indicate usb controller index
+- vbus-supply: regulator for vbus
+- disable-over-current: disable over current detect
+- external-vbus-divider: enables off-chip resistor divider for Vbus
+- maximum-speed: limit the maximum connection speed to "full-speed".
+- tpl-support: TPL (Targeted Peripheral List) feature for targeted hosts
+
+Examples:
+usb@02184000 { /* USB OTG */
+ compatible = "fsl,imx6q-usb", "fsl,imx27-usb";
+ reg = <0x02184000 0x200>;
+ interrupts = <0 43 0x04>;
+ fsl,usbphy = <&usbphy1>;
+ fsl,usbmisc = <&usbmisc 0>;
+ disable-over-current;
+ external-vbus-divider;
+ maximum-speed = "full-speed";
+ tpl-support;
+};
diff --git a/kernel/Documentation/devicetree/bindings/usb/ci-hdrc-qcom.txt b/kernel/Documentation/devicetree/bindings/usb/ci-hdrc-qcom.txt
new file mode 100644
index 000000000..f2899b550
--- /dev/null
+++ b/kernel/Documentation/devicetree/bindings/usb/ci-hdrc-qcom.txt
@@ -0,0 +1,17 @@
+Qualcomm CI13xxx (Chipidea) USB controllers
+
+Required properties:
+- compatible: should contain "qcom,ci-hdrc"
+- reg: offset and length of the register set in the memory map
+- interrupts: interrupt-specifier for the controller interrupt.
+- usb-phy: phandle for the PHY device
+- dr_mode: Should be "peripheral"
+
+Examples:
+ gadget@f9a55000 {
+ compatible = "qcom,ci-hdrc";
+ reg = <0xf9a55000 0x400>;
+ dr_mode = "peripheral";
+ interrupts = <0 134 0>;
+ usb-phy = <&usbphy0>;
+ };
diff --git a/kernel/Documentation/devicetree/bindings/usb/ci-hdrc-usb2.txt b/kernel/Documentation/devicetree/bindings/usb/ci-hdrc-usb2.txt
new file mode 100644
index 000000000..27f8b1e5e
--- /dev/null
+++ b/kernel/Documentation/devicetree/bindings/usb/ci-hdrc-usb2.txt
@@ -0,0 +1,24 @@
+* USB2 ChipIdea USB controller for ci13xxx
+
+Required properties:
+- compatible: should be "chipidea,usb2"
+- reg: base address and length of the registers
+- interrupts: interrupt for the USB controller
+
+Optional properties:
+- clocks: reference to the USB clock
+- phys: reference to the USB PHY
+- phy-names: should be "usb-phy"
+- vbus-supply: reference to the VBUS regulator
+
+Example:
+
+ usb@f7ed0000 {
+ compatible = "chipidea,usb2";
+ reg = <0xf7ed0000 0x10000>;
+ interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&chip CLKID_USB0>;
+ phys = <&usb_phy0>;
+ phy-names = "usb-phy";
+ vbus-supply = <&reg_usb0_vbus>;
+ };
diff --git a/kernel/Documentation/devicetree/bindings/usb/ci-hdrc-zevio.txt b/kernel/Documentation/devicetree/bindings/usb/ci-hdrc-zevio.txt
new file mode 100644
index 000000000..abbcb2aea
--- /dev/null
+++ b/kernel/Documentation/devicetree/bindings/usb/ci-hdrc-zevio.txt
@@ -0,0 +1,17 @@
+* LSI Zevio USB OTG Controller
+
+Required properties:
+- compatible: Should be "lsi,zevio-usb"
+- reg: Should contain registers location and length
+- interrupts: Should contain controller interrupt
+
+Optional properties:
+- vbus-supply: regulator for vbus
+
+Examples:
+ usb0: usb@b0000000 {
+ reg = <0xb0000000 0x1000>;
+ compatible = "lsi,zevio-usb";
+ interrupts = <8>;
+ vbus-supply = <&vbus_reg>;
+ };
diff --git a/kernel/Documentation/devicetree/bindings/usb/dwc2.txt b/kernel/Documentation/devicetree/bindings/usb/dwc2.txt
new file mode 100644
index 000000000..fd132cbee
--- /dev/null
+++ b/kernel/Documentation/devicetree/bindings/usb/dwc2.txt
@@ -0,0 +1,38 @@
+Platform DesignWare HS OTG USB 2.0 controller
+-----------------------------------------------------
+
+Required properties:
+- compatible : One of:
+ - brcm,bcm2835-usb: The DWC2 USB controller instance in the BCM2835 SoC.
+ - rockchip,rk3066-usb: The DWC2 USB controller instance in the rk3066 Soc;
+ - "rockchip,rk3188-usb", "rockchip,rk3066-usb", "snps,dwc2": for rk3188 Soc;
+ - "rockchip,rk3288-usb", "rockchip,rk3066-usb", "snps,dwc2": for rk3288 Soc;
+ - snps,dwc2: A generic DWC2 USB controller with default parameters.
+- reg : Should contain 1 register range (address and length)
+- interrupts : Should contain 1 interrupt
+- clocks: clock provider specifier
+- clock-names: shall be "otg"
+Refer to clk/clock-bindings.txt for generic clock consumer properties
+
+Optional properties:
+- phys: phy provider specifier
+- phy-names: shall be "usb2-phy"
+Refer to phy/phy-bindings.txt for generic phy consumer properties
+- dr_mode: shall be one of "host", "peripheral" and "otg"
+ Refer to usb/generic.txt
+- g-use-dma: enable dma usage in gadget driver.
+- g-rx-fifo-size: size of rx fifo size in gadget mode.
+- g-np-tx-fifo-size: size of non-periodic tx fifo size in gadget mode.
+- g-tx-fifo-size: size of periodic tx fifo per endpoint (except ep0) in gadget mode.
+
+Example:
+
+ usb@101c0000 {
+ compatible = "ralink,rt3050-usb, snps,dwc2";
+ reg = <0x101c0000 40000>;
+ interrupts = <18>;
+ clocks = <&usb_otg_ahb_clk>;
+ clock-names = "otg";
+ phys = <&usbphy>;
+ phy-names = "usb2-phy";
+ };
diff --git a/kernel/Documentation/devicetree/bindings/usb/dwc3-st.txt b/kernel/Documentation/devicetree/bindings/usb/dwc3-st.txt
new file mode 100644
index 000000000..f9d70252b
--- /dev/null
+++ b/kernel/Documentation/devicetree/bindings/usb/dwc3-st.txt
@@ -0,0 +1,68 @@
+ST DWC3 glue logic
+
+This file documents the parameters for the dwc3-st driver.
+This driver controls the glue logic used to configure the dwc3 core on
+STiH407 based platforms.
+
+Required properties:
+ - compatible : must be "st,stih407-dwc3"
+ - reg : glue logic base address and USB syscfg ctrl register offset
+ - reg-names : should be "reg-glue" and "syscfg-reg"
+ - st,syscon : should be phandle to system configuration node which
+ encompasses the glue registers
+ - resets : list of phandle and reset specifier pairs. There should be two entries, one
+ for the powerdown and softreset lines of the usb3 IP
+ - reset-names : list of reset signal names. Names should be "powerdown" and "softreset"
+See: Documentation/devicetree/bindings/reset/st,sti-powerdown.txt
+See: Documentation/devicetree/bindings/reset/reset.txt
+
+ - #address-cells, #size-cells : should be '1' if the device has sub-nodes
+ with 'reg' property
+
+ - pinctl-names : A pinctrl state named "default" must be defined
+See: Documentation/devicetree/bindings/pinctrl/pinctrl-binding.txt
+
+ - pinctrl-0 : Pin control group
+See: Documentation/devicetree/bindings/pinctrl/pinctrl-binding.txt
+
+ - ranges : allows valid 1:1 translation between child's address space and
+ parent's address space
+
+Sub-nodes:
+The dwc3 core should be added as subnode to ST DWC3 glue as shown in the
+example below. The DT binding details of dwc3 can be found in:
+Documentation/devicetree/bindings/usb/dwc3.txt
+
+NB: The dr_mode property described in [1] is NOT optional for this driver, as the default value
+is "otg", which isn't supported by this SoC. Valid dr_mode values for dwc3-st are either "host"
+or "device".
+
+[1] Documentation/devicetree/bindings/usb/generic.txt
+
+Example:
+
+st_dwc3: dwc3@8f94000 {
+ status = "disabled";
+ compatible = "st,stih407-dwc3";
+ reg = <0x08f94000 0x1000>, <0x110 0x4>;
+ reg-names = "reg-glue", "syscfg-reg";
+ st,syscfg = <&syscfg_core>;
+ resets = <&powerdown STIH407_USB3_POWERDOWN>,
+ <&softreset STIH407_MIPHY2_SOFTRESET>;
+ reset-names = "powerdown",
+ "softreset";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usb3>;
+ ranges;
+
+ dwc3: dwc3@9900000 {
+ compatible = "snps,dwc3";
+ reg = <0x09900000 0x100000>;
+ interrupts = <GIC_SPI 155 IRQ_TYPE_NONE>;
+ dr_mode = "host";
+ phys-names = "usb2-phy", "usb3-phy";
+ phys = <&usb2_picophy2>, <&phy_port2 MIPHY_TYPE_USB>;
+ };
+};
diff --git a/kernel/Documentation/devicetree/bindings/usb/dwc3.txt b/kernel/Documentation/devicetree/bindings/usb/dwc3.txt
new file mode 100644
index 000000000..5cc364309
--- /dev/null
+++ b/kernel/Documentation/devicetree/bindings/usb/dwc3.txt
@@ -0,0 +1,50 @@
+synopsys DWC3 CORE
+
+DWC3- USB3 CONTROLLER
+
+Required properties:
+ - compatible: must be "snps,dwc3"
+ - reg : Address and length of the register set for the device
+ - interrupts: Interrupts used by the dwc3 controller.
+
+Optional properties:
+ - usb-phy : array of phandle for the PHY device. The first element
+ in the array is expected to be a handle to the USB2/HS PHY and
+ the second element is expected to be a handle to the USB3/SS PHY
+ - phys: from the *Generic PHY* bindings
+ - phy-names: from the *Generic PHY* bindings
+ - tx-fifo-resize: determines if the FIFO *has* to be reallocated.
+ - snps,usb3_lpm_capable: determines if platform is USB3 LPM capable
+ - snps,disable_scramble_quirk: true when SW should disable data scrambling.
+ Only really useful for FPGA builds.
+ - snps,has-lpm-erratum: true when DWC3 was configured with LPM Erratum enabled
+ - snps,lpm-nyet-threshold: LPM NYET threshold
+ - snps,u2exit_lfps_quirk: set if we want to enable u2exit lfps quirk
+ - snps,u2ss_inp3_quirk: set if we enable P3 OK for U2/SS Inactive quirk
+ - snps,req_p1p2p3_quirk: when set, the core will always request for
+ P1/P2/P3 transition sequence.
+ - snps,del_p1p2p3_quirk: when set core will delay P1/P2/P3 until a certain
+ amount of 8B10B errors occur.
+ - snps,del_phy_power_chg_quirk: when set core will delay PHY power change
+ from P0 to P1/P2/P3.
+ - snps,lfps_filter_quirk: when set core will filter LFPS reception.
+ - snps,rx_detect_poll_quirk: when set core will disable a 400us delay to start
+ Polling LFPS after RX.Detect.
+ - snps,tx_de_emphasis_quirk: when set core will set Tx de-emphasis value.
+ - snps,tx_de_emphasis: the value driven to the PHY is controlled by the
+ LTSSM during USB3 Compliance mode.
+ - snps,dis_u3_susphy_quirk: when set core will disable USB3 suspend phy.
+ - snps,dis_u2_susphy_quirk: when set core will disable USB2 suspend phy.
+ - snps,is-utmi-l1-suspend: true when DWC3 asserts output signal
+ utmi_l1_suspend_n, false when asserts utmi_sleep_n
+ - snps,hird-threshold: HIRD threshold
+
+This is usually a subnode to DWC3 glue to which it is connected.
+
+dwc3@4a030000 {
+ compatible = "snps,dwc3";
+ reg = <0x4a030000 0xcfff>;
+ interrupts = <0 92 4>
+ usb-phy = <&usb2_phy>, <&usb3,phy>;
+ tx-fifo-resize;
+};
diff --git a/kernel/Documentation/devicetree/bindings/usb/ehci-omap.txt b/kernel/Documentation/devicetree/bindings/usb/ehci-omap.txt
new file mode 100644
index 000000000..3dc231c83
--- /dev/null
+++ b/kernel/Documentation/devicetree/bindings/usb/ehci-omap.txt
@@ -0,0 +1,32 @@
+OMAP HS USB EHCI controller
+
+This device is usually the child of the omap-usb-host
+Documentation/devicetree/bindings/mfd/omap-usb-host.txt
+
+Required properties:
+
+- compatible: should be "ti,ehci-omap"
+- reg: should contain one register range i.e. start and length
+- interrupts: description of the interrupt line
+
+Optional properties:
+
+- phys: list of phandles to PHY nodes.
+ This property is required if at least one of the ports are in
+ PHY mode i.e. OMAP_EHCI_PORT_MODE_PHY
+
+To specify the port mode, see
+Documentation/devicetree/bindings/mfd/omap-usb-host.txt
+
+Example for OMAP4:
+
+usbhsehci: ehci@4a064c00 {
+ compatible = "ti,ehci-omap";
+ reg = <0x4a064c00 0x400>;
+ interrupts = <0 77 0x4>;
+};
+
+&usbhsehci {
+ phys = <&hsusb1_phy 0 &hsusb3_phy>;
+};
+
diff --git a/kernel/Documentation/devicetree/bindings/usb/ehci-orion.txt b/kernel/Documentation/devicetree/bindings/usb/ehci-orion.txt
new file mode 100644
index 000000000..17c3bc858
--- /dev/null
+++ b/kernel/Documentation/devicetree/bindings/usb/ehci-orion.txt
@@ -0,0 +1,20 @@
+* EHCI controller, Orion Marvell variants
+
+Required properties:
+- compatible: must be "marvell,orion-ehci"
+- reg: physical base address of the controller and length of memory mapped
+ region.
+- interrupts: The EHCI interrupt
+
+Optional properties:
+- clocks: reference to the clock
+- phys: reference to the USB PHY
+- phy-names: name of the USB PHY, should be "usb"
+
+Example:
+
+ ehci@50000 {
+ compatible = "marvell,orion-ehci";
+ reg = <0x50000 0x1000>;
+ interrupts = <19>;
+ };
diff --git a/kernel/Documentation/devicetree/bindings/usb/ehci-st.txt b/kernel/Documentation/devicetree/bindings/usb/ehci-st.txt
new file mode 100644
index 000000000..fb45fa577
--- /dev/null
+++ b/kernel/Documentation/devicetree/bindings/usb/ehci-st.txt
@@ -0,0 +1,39 @@
+ST USB EHCI controller
+
+Required properties:
+ - compatible : must be "st,st-ehci-300x"
+ - reg : physical base addresses of the controller and length of memory mapped
+ region
+ - interrupts : one EHCI interrupt should be described here
+ - pinctrl-names : a pinctrl state named "default" must be defined
+ - pinctrl-0 : phandle referencing pin configuration of the USB controller
+See: Documentation/devicetree/bindings/pinctrl/pinctrl-binding.txt
+ - clocks : phandle list of usb clocks
+ - clock-names : should be "ic" for interconnect clock and "clk48"
+See: Documentation/devicetree/bindings/clock/clock-bindings.txt
+
+ - phys : phandle for the PHY device
+ - phy-names : should be "usb"
+ - resets : phandle + reset specifier pairs to the powerdown and softreset lines
+ of the USB IP
+ - reset-names : should be "power" and "softreset"
+See: Documentation/devicetree/bindings/reset/st,sti-powerdown.txt
+See: Documentation/devicetree/bindings/reset/reset.txt
+
+Example:
+
+ ehci1: usb@0xfe203e00 {
+ compatible = "st,st-ehci-300x";
+ reg = <0xfe203e00 0x100>;
+ interrupts = <GIC_SPI 148 IRQ_TYPE_NONE>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usb1>;
+ clocks = <&clk_s_a1_ls 0>;
+ phys = <&usb2_phy>;
+ phy-names = "usb";
+ status = "okay";
+
+ resets = <&powerdown STIH416_USB1_POWERDOWN>,
+ <&softreset STIH416_USB1_SOFTRESET>;
+ reset-names = "power", "softreset";
+ };
diff --git a/kernel/Documentation/devicetree/bindings/usb/exynos-usb.txt b/kernel/Documentation/devicetree/bindings/usb/exynos-usb.txt
new file mode 100644
index 000000000..9b4dbe3b2
--- /dev/null
+++ b/kernel/Documentation/devicetree/bindings/usb/exynos-usb.txt
@@ -0,0 +1,117 @@
+Samsung Exynos SoC USB controller
+
+The USB devices interface with USB controllers on Exynos SOCs.
+The device node has following properties.
+
+EHCI
+Required properties:
+ - compatible: should be "samsung,exynos4210-ehci" for USB 2.0
+ EHCI controller in host mode.
+ - reg: physical base address of the controller and length of memory mapped
+ region.
+ - interrupts: interrupt number to the cpu.
+ - clocks: from common clock binding: handle to usb clock.
+ - clock-names: from common clock binding: Shall be "usbhost".
+ - port: if in the SoC there are EHCI phys, they should be listed here.
+ One phy per port. Each port should have following entries:
+ - reg: port number on EHCI controller, e.g
+ On Exynos5250, port 0 is USB2.0 otg phy
+ port 1 is HSIC phy0
+ port 2 is HSIC phy1
+ - phys: from the *Generic PHY* bindings; specifying phy used by port.
+
+Optional properties:
+ - samsung,vbus-gpio: if present, specifies the GPIO that
+ needs to be pulled up for the bus to be powered.
+
+Example:
+
+ usb@12110000 {
+ compatible = "samsung,exynos4210-ehci";
+ reg = <0x12110000 0x100>;
+ interrupts = <0 71 0>;
+ samsung,vbus-gpio = <&gpx2 6 1 3 3>;
+
+ clocks = <&clock 285>;
+ clock-names = "usbhost";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+ port@0 {
+ reg = <0>;
+ phys = <&usb2phy 1>;
+ status = "disabled";
+ };
+ };
+
+OHCI
+Required properties:
+ - compatible: should be "samsung,exynos4210-ohci" for USB 2.0
+ OHCI companion controller in host mode.
+ - reg: physical base address of the controller and length of memory mapped
+ region.
+ - interrupts: interrupt number to the cpu.
+ - clocks: from common clock binding: handle to usb clock.
+ - clock-names: from common clock binding: Shall be "usbhost".
+ - port: if in the SoC there are OHCI phys, they should be listed here.
+ One phy per port. Each port should have following entries:
+ - reg: port number on OHCI controller, e.g
+ On Exynos5250, port 0 is USB2.0 otg phy
+ port 1 is HSIC phy0
+ port 2 is HSIC phy1
+ - phys: from the *Generic PHY* bindings, specifying phy used by port.
+
+Example:
+ usb@12120000 {
+ compatible = "samsung,exynos4210-ohci";
+ reg = <0x12120000 0x100>;
+ interrupts = <0 71 0>;
+
+ clocks = <&clock 285>;
+ clock-names = "usbhost";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+ port@0 {
+ reg = <0>;
+ phys = <&usb2phy 1>;
+ status = "disabled";
+ };
+
+ };
+
+DWC3
+Required properties:
+ - compatible: should be one of the following -
+ "samsung,exynos5250-dwusb3": for USB 3.0 DWC3 controller on
+ Exynos5250/5420.
+ "samsung,exynos7-dwusb3": for USB 3.0 DWC3 controller on Exynos7.
+ - #address-cells, #size-cells : should be '1' if the device has sub-nodes
+ with 'reg' property.
+ - ranges: allows valid 1:1 translation between child's address space and
+ parent's address space
+ - clocks: Clock IDs array as required by the controller.
+ - clock-names: names of clocks correseponding to IDs in the clock property
+
+Sub-nodes:
+The dwc3 core should be added as subnode to Exynos dwc3 glue.
+- dwc3 :
+ The binding details of dwc3 can be found in:
+ Documentation/devicetree/bindings/usb/dwc3.txt
+
+Example:
+ usb@12000000 {
+ compatible = "samsung,exynos5250-dwusb3";
+ clocks = <&clock 286>;
+ clock-names = "usbdrd30";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ dwc3 {
+ compatible = "synopsys,dwc3";
+ reg = <0x12000000 0x10000>;
+ interrupts = <0 72 0>;
+ usb-phy = <&usb2_phy &usb3_phy>;
+ };
+ };
diff --git a/kernel/Documentation/devicetree/bindings/usb/fsl-usb.txt b/kernel/Documentation/devicetree/bindings/usb/fsl-usb.txt
new file mode 100644
index 000000000..4779c029b
--- /dev/null
+++ b/kernel/Documentation/devicetree/bindings/usb/fsl-usb.txt
@@ -0,0 +1,83 @@
+Freescale SOC USB controllers
+
+The device node for a USB controller that is part of a Freescale
+SOC is as described in the document "Open Firmware Recommended
+Practice : Universal Serial Bus" with the following modifications
+and additions :
+
+Required properties :
+ - compatible : Should be "fsl-usb2-mph" for multi port host USB
+ controllers, or "fsl-usb2-dr" for dual role USB controllers
+ or "fsl,mpc5121-usb2-dr" for dual role USB controllers of MPC5121.
+ Wherever applicable, the IP version of the USB controller should
+ also be mentioned (for eg. fsl-usb2-dr-v2.2 for bsc9132).
+ - phy_type : For multi port host USB controllers, should be one of
+ "ulpi", or "serial". For dual role USB controllers, should be
+ one of "ulpi", "utmi", "utmi_wide", or "serial".
+ - reg : Offset and length of the register set for the device
+ - port0 : boolean; if defined, indicates port0 is connected for
+ fsl-usb2-mph compatible controllers. Either this property or
+ "port1" (or both) must be defined for "fsl-usb2-mph" compatible
+ controllers.
+ - port1 : boolean; if defined, indicates port1 is connected for
+ fsl-usb2-mph compatible controllers. Either this property or
+ "port0" (or both) must be defined for "fsl-usb2-mph" compatible
+ controllers.
+ - dr_mode : indicates the working mode for "fsl-usb2-dr" compatible
+ controllers. Can be "host", "peripheral", or "otg". Default to
+ "host" if not defined for backward compatibility.
+
+Recommended properties :
+ - interrupts : <a b> where a is the interrupt number and b is a
+ field that represents an encoding of the sense and level
+ information for the interrupt. This should be encoded based on
+ the information in section 2) depending on the type of interrupt
+ controller you have.
+ - interrupt-parent : the phandle for the interrupt controller that
+ services interrupts for this device.
+
+Optional properties :
+ - fsl,invert-drvvbus : boolean; for MPC5121 USB0 only. Indicates the
+ port power polarity of internal PHY signal DRVVBUS is inverted.
+ - fsl,invert-pwr-fault : boolean; for MPC5121 USB0 only. Indicates
+ the PWR_FAULT signal polarity is inverted.
+
+Example multi port host USB controller device node :
+ usb@22000 {
+ compatible = "fsl-usb2-mph";
+ reg = <22000 1000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ interrupt-parent = <700>;
+ interrupts = <27 1>;
+ phy_type = "ulpi";
+ port0;
+ port1;
+ };
+
+Example dual role USB controller device node :
+ usb@23000 {
+ compatible = "fsl-usb2-dr";
+ reg = <23000 1000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ interrupt-parent = <700>;
+ interrupts = <26 1>;
+ dr_mode = "otg";
+ phy = "ulpi";
+ };
+
+Example dual role USB controller device node for MPC5121ADS:
+
+ usb@4000 {
+ compatible = "fsl,mpc5121-usb2-dr";
+ reg = <0x4000 0x1000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ interrupt-parent = < &ipic >;
+ interrupts = <44 0x8>;
+ dr_mode = "otg";
+ phy_type = "utmi_wide";
+ fsl,invert-drvvbus;
+ fsl,invert-pwr-fault;
+ };
diff --git a/kernel/Documentation/devicetree/bindings/usb/generic.txt b/kernel/Documentation/devicetree/bindings/usb/generic.txt
new file mode 100644
index 000000000..477d5bb5e
--- /dev/null
+++ b/kernel/Documentation/devicetree/bindings/usb/generic.txt
@@ -0,0 +1,24 @@
+Generic USB Properties
+
+Optional properties:
+ - maximum-speed: tells USB controllers we want to work up to a certain
+ speed. Valid arguments are "super-speed", "high-speed",
+ "full-speed" and "low-speed". In case this isn't passed
+ via DT, USB controllers should default to their maximum
+ HW capability.
+ - dr_mode: tells Dual-Role USB controllers that we want to work on a
+ particular mode. Valid arguments are "host",
+ "peripheral" and "otg". In case this attribute isn't
+ passed via DT, USB DRD controllers should default to
+ OTG.
+
+This is an attribute to a USB controller such as:
+
+dwc3@4a030000 {
+ compatible = "synopsys,dwc3";
+ reg = <0x4a030000 0xcfff>;
+ interrupts = <0 92 4>
+ usb-phy = <&usb2_phy>, <&usb3,phy>;
+ maximum-speed = "super-speed";
+ dr_mode = "otg";
+};
diff --git a/kernel/Documentation/devicetree/bindings/usb/gr-udc.txt b/kernel/Documentation/devicetree/bindings/usb/gr-udc.txt
new file mode 100644
index 000000000..e9445224f
--- /dev/null
+++ b/kernel/Documentation/devicetree/bindings/usb/gr-udc.txt
@@ -0,0 +1,34 @@
+USB Peripheral Controller driver for Aeroflex Gaisler GRUSBDC.
+
+The GRUSBDC USB Device Controller core is available in the GRLIB VHDL
+IP core library.
+
+Note: In the ordinary environment for the core, a Leon SPARC system,
+these properties are built from information in the AMBA plug&play.
+
+Required properties:
+
+- name : Should be "GAISLER_USBDC" or "01_021"
+
+- reg : Address and length of the register set for the device
+
+- interrupts : Interrupt numbers for this device. Either one interrupt number
+ for all interrupts, or one for status related interrupts, one for IN
+ endpoint related interrupts and one for OUT endpoint related interrupts.
+
+Optional properties:
+
+- epobufsizes : Array of buffer sizes for OUT endpoints when they differ
+ from the default size of 1024. The array is indexed by the OUT endpoint
+ number. If the property is present it typically contains one entry for
+ each OUT endpoint of the core. Fewer entries overrides the default sizes
+ only for as many endpoints as the array contains.
+
+- epibufsizes : Array of buffer sizes for IN endpoints when they differ
+ from the default size of 1024. The array is indexed by the IN endpoint
+ number. If the property is present it typically contains one entry for
+ each IN endpoint of the core. Fewer entries overrides the default sizes
+ only for as many endpoints as the array contains.
+
+For further information look in the documentation for the GLIB IP core library:
+http://www.gaisler.com/products/grlib/grip.pdf
diff --git a/kernel/Documentation/devicetree/bindings/usb/isp1301.txt b/kernel/Documentation/devicetree/bindings/usb/isp1301.txt
new file mode 100644
index 000000000..5405d99d9
--- /dev/null
+++ b/kernel/Documentation/devicetree/bindings/usb/isp1301.txt
@@ -0,0 +1,25 @@
+* NXP ISP1301 USB transceiver
+
+Required properties:
+- compatible: must be "nxp,isp1301"
+- reg: I2C address of the ISP1301 device
+
+Optional properties of devices using ISP1301:
+- transceiver: phandle of isp1301 - this helps the ISP1301 driver to find the
+ ISP1301 instance associated with the respective USB driver
+
+Example:
+
+ isp1301: usb-transceiver@2c {
+ compatible = "nxp,isp1301";
+ reg = <0x2c>;
+ };
+
+ usbd@31020000 {
+ compatible = "nxp,lpc3220-udc";
+ reg = <0x31020000 0x300>;
+ interrupt-parent = <&mic>;
+ interrupts = <0x3d 0>, <0x3e 0>, <0x3c 0>, <0x3a 0>;
+ transceiver = <&isp1301>;
+ status = "okay";
+ };
diff --git a/kernel/Documentation/devicetree/bindings/usb/keystone-phy.txt b/kernel/Documentation/devicetree/bindings/usb/keystone-phy.txt
new file mode 100644
index 000000000..f37b3a863
--- /dev/null
+++ b/kernel/Documentation/devicetree/bindings/usb/keystone-phy.txt
@@ -0,0 +1,20 @@
+TI Keystone USB PHY
+
+Required properties:
+ - compatible: should be "ti,keystone-usbphy".
+ - #address-cells, #size-cells : should be '1' if the device has sub-nodes
+ with 'reg' property.
+ - reg : Address and length of the usb phy control register set.
+
+The main purpose of this PHY driver is to enable the USB PHY reference clock
+gate on the Keystone SOC for both the USB2 and USB3 PHY. Otherwise it is just
+an NOP PHY driver. Hence this node is referenced as both the usb2 and usb3
+phy node in the USB Glue layer driver node.
+
+usb_phy: usb_phy@2620738 {
+ compatible = "ti,keystone-usbphy";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ reg = <0x2620738 32>;
+ status = "disabled";
+};
diff --git a/kernel/Documentation/devicetree/bindings/usb/keystone-usb.txt b/kernel/Documentation/devicetree/bindings/usb/keystone-usb.txt
new file mode 100644
index 000000000..60527d335
--- /dev/null
+++ b/kernel/Documentation/devicetree/bindings/usb/keystone-usb.txt
@@ -0,0 +1,42 @@
+TI Keystone Soc USB Controller
+
+DWC3 GLUE
+
+Required properties:
+ - compatible: should be "ti,keystone-dwc3".
+ - #address-cells, #size-cells : should be '1' if the device has sub-nodes
+ with 'reg' property.
+ - reg : Address and length of the register set for the USB subsystem on
+ the SOC.
+ - interrupts : The irq number of this device that is used to interrupt the
+ MPU.
+ - ranges: allows valid 1:1 translation between child's address space and
+ parent's address space.
+ - clocks: Clock IDs array as required by the controller.
+ - clock-names: names of clocks correseponding to IDs in the clock property.
+
+Sub-nodes:
+The dwc3 core should be added as subnode to Keystone DWC3 glue.
+- dwc3 :
+ The binding details of dwc3 can be found in:
+ Documentation/devicetree/bindings/usb/dwc3.txt
+
+Example:
+ usb: usb@2680000 {
+ compatible = "ti,keystone-dwc3";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ reg = <0x2680000 0x10000>;
+ clocks = <&clkusb>;
+ clock-names = "usb";
+ interrupts = <GIC_SPI 393 IRQ_TYPE_EDGE_RISING>;
+ ranges;
+ status = "disabled";
+
+ dwc3@2690000 {
+ compatible = "synopsys,dwc3";
+ reg = <0x2690000 0x70000>;
+ interrupts = <GIC_SPI 393 IRQ_TYPE_EDGE_RISING>;
+ usb-phy = <&usb_phy>, <&usb_phy>;
+ };
+ };
diff --git a/kernel/Documentation/devicetree/bindings/usb/lpc32xx-udc.txt b/kernel/Documentation/devicetree/bindings/usb/lpc32xx-udc.txt
new file mode 100644
index 000000000..29f12a533
--- /dev/null
+++ b/kernel/Documentation/devicetree/bindings/usb/lpc32xx-udc.txt
@@ -0,0 +1,28 @@
+* NXP LPC32xx SoC USB Device Controller (UDC)
+
+Required properties:
+- compatible: Must be "nxp,lpc3220-udc"
+- reg: Physical base address of the controller and length of memory mapped
+ region.
+- interrupts: The USB interrupts:
+ * USB Device Low Priority Interrupt
+ * USB Device High Priority Interrupt
+ * USB Device DMA Interrupt
+ * External USB Transceiver Interrupt (OTG ATX)
+- transceiver: phandle of the associated ISP1301 device - this is necessary for
+ the UDC controller for connecting to the USB physical layer
+
+Example:
+
+ isp1301: usb-transceiver@2c {
+ compatible = "nxp,isp1301";
+ reg = <0x2c>;
+ };
+
+ usbd@31020000 {
+ compatible = "nxp,lpc3220-udc";
+ reg = <0x31020000 0x300>;
+ interrupt-parent = <&mic>;
+ interrupts = <0x3d 0>, <0x3e 0>, <0x3c 0>, <0x3a 0>;
+ transceiver = <&isp1301>;
+ };
diff --git a/kernel/Documentation/devicetree/bindings/usb/msm-hsusb.txt b/kernel/Documentation/devicetree/bindings/usb/msm-hsusb.txt
new file mode 100644
index 000000000..2826f2af5
--- /dev/null
+++ b/kernel/Documentation/devicetree/bindings/usb/msm-hsusb.txt
@@ -0,0 +1,95 @@
+MSM SoC HSUSB controllers
+
+EHCI
+
+Required properties:
+- compatible: Should contain "qcom,ehci-host"
+- regs: offset and length of the register set in the memory map
+- usb-phy: phandle for the PHY device
+
+Example EHCI controller device node:
+
+ ehci: ehci@f9a55000 {
+ compatible = "qcom,ehci-host";
+ reg = <0xf9a55000 0x400>;
+ usb-phy = <&usb_otg>;
+ };
+
+USB PHY with optional OTG:
+
+Required properties:
+- compatible: Should contain:
+ "qcom,usb-otg-ci" for chipsets with ChipIdea 45nm PHY
+ "qcom,usb-otg-snps" for chipsets with Synopsys 28nm PHY
+
+- regs: Offset and length of the register set in the memory map
+- interrupts: interrupt-specifier for the OTG interrupt.
+
+- clocks: A list of phandle + clock-specifier pairs for the
+ clocks listed in clock-names
+- clock-names: Should contain the following:
+ "phy" USB PHY reference clock
+ "core" Protocol engine clock
+ "iface" Interface bus clock
+ "alt_core" Protocol engine clock for targets with asynchronous
+ reset methodology. (optional)
+
+- vdccx-supply: phandle to the regulator for the vdd supply for
+ digital circuit operation.
+- v1p8-supply: phandle to the regulator for the 1.8V supply
+- v3p3-supply: phandle to the regulator for the 3.3V supply
+
+- resets: A list of phandle + reset-specifier pairs for the
+ resets listed in reset-names
+- reset-names: Should contain the following:
+ "phy" USB PHY controller reset
+ "link" USB LINK controller reset
+
+- qcom,otg-control: OTG control (VBUS and ID notifications) can be one of
+ 1 - PHY control
+ 2 - PMIC control
+
+Optional properties:
+- dr_mode: One of "host", "peripheral" or "otg". Defaults to "otg"
+
+- qcom,phy-init-sequence: PHY configuration sequence values. This is related to Device
+ Mode Eye Diagram test. Start address at which these values will be
+ written is ULPI_EXT_VENDOR_SPECIFIC. Value of -1 is reserved as
+ "do not overwrite default value at this address".
+ For example: qcom,phy-init-sequence = < -1 0x63 >;
+ Will update only value at address ULPI_EXT_VENDOR_SPECIFIC + 1.
+
+- qcom,phy-num: Select number of pyco-phy to use, can be one of
+ 0 - PHY one, default
+ 1 - Second PHY
+ Some platforms may have configuration to allow USB
+ controller work with any of the two HSPHYs present.
+
+- qcom,vdd-levels: This property must be a list of three integer values
+ (no, min, max) where each value represents either a voltage
+ in microvolts or a value corresponding to voltage corner.
+
+Example HSUSB OTG controller device node:
+
+ usb@f9a55000 {
+ compatible = "qcom,usb-otg-snps";
+ reg = <0xf9a55000 0x400>;
+ interrupts = <0 134 0>;
+ dr_mode = "peripheral";
+
+ clocks = <&gcc GCC_XO_CLK>, <&gcc GCC_USB_HS_SYSTEM_CLK>,
+ <&gcc GCC_USB_HS_AHB_CLK>;
+
+ clock-names = "phy", "core", "iface";
+
+ vddcx-supply = <&pm8841_s2_corner>;
+ v1p8-supply = <&pm8941_l6>;
+ v3p3-supply = <&pm8941_l24>;
+
+ resets = <&gcc GCC_USB2A_PHY_BCR>, <&gcc GCC_USB_HS_BCR>;
+ reset-names = "phy", "link";
+
+ qcom,otg-control = <1>;
+ qcom,phy-init-sequence = < -1 0x63 >;
+ qcom,vdd-levels = <1 5 7>;
+ };
diff --git a/kernel/Documentation/devicetree/bindings/usb/mxs-phy.txt b/kernel/Documentation/devicetree/bindings/usb/mxs-phy.txt
new file mode 100644
index 000000000..379b84a56
--- /dev/null
+++ b/kernel/Documentation/devicetree/bindings/usb/mxs-phy.txt
@@ -0,0 +1,21 @@
+* Freescale MXS USB Phy Device
+
+Required properties:
+- compatible: should contain:
+ * "fsl,imx23-usbphy" for imx23 and imx28
+ * "fsl,imx6q-usbphy" for imx6dq and imx6dl
+ * "fsl,imx6sl-usbphy" for imx6sl
+ * "fsl,vf610-usbphy" for Vybrid vf610
+ * "fsl,imx6sx-usbphy" for imx6sx
+ "fsl,imx23-usbphy" is still a fallback for other strings
+- reg: Should contain registers location and length
+- interrupts: Should contain phy interrupt
+- fsl,anatop: phandle for anatop register, it is only for imx6 SoC series
+
+Example:
+usbphy1: usbphy@020c9000 {
+ compatible = "fsl,imx6q-usbphy", "fsl,imx23-usbphy";
+ reg = <0x020c9000 0x1000>;
+ interrupts = <0 44 0x04>;
+ fsl,anatop = <&anatop>;
+};
diff --git a/kernel/Documentation/devicetree/bindings/usb/nvidia,tegra20-ehci.txt b/kernel/Documentation/devicetree/bindings/usb/nvidia,tegra20-ehci.txt
new file mode 100644
index 000000000..f60785f73
--- /dev/null
+++ b/kernel/Documentation/devicetree/bindings/usb/nvidia,tegra20-ehci.txt
@@ -0,0 +1,23 @@
+Tegra SOC USB controllers
+
+The device node for a USB controller that is part of a Tegra
+SOC is as described in the document "Open Firmware Recommended
+Practice : Universal Serial Bus" with the following modifications
+and additions :
+
+Required properties :
+ - compatible : For Tegra20, must contain "nvidia,tegra20-ehci".
+ For Tegra30, must contain "nvidia,tegra30-ehci". Otherwise, must contain
+ "nvidia,<chip>-ehci" plus at least one of the above, where <chip> is
+ tegra114, tegra124, tegra132, or tegra210.
+ - nvidia,phy : phandle of the PHY that the controller is connected to.
+ - clocks : Must contain one entry, for the module clock.
+ See ../clocks/clock-bindings.txt for details.
+ - resets : Must contain an entry for each entry in reset-names.
+ See ../reset/reset.txt for details.
+ - reset-names : Must include the following entries:
+ - usb
+
+Optional properties:
+ - nvidia,needs-double-reset : boolean is to be set for some of the Tegra20
+ USB ports, which need reset twice due to hardware issues.
diff --git a/kernel/Documentation/devicetree/bindings/usb/nvidia,tegra20-usb-phy.txt b/kernel/Documentation/devicetree/bindings/usb/nvidia,tegra20-usb-phy.txt
new file mode 100644
index 000000000..a9aa79fb9
--- /dev/null
+++ b/kernel/Documentation/devicetree/bindings/usb/nvidia,tegra20-usb-phy.txt
@@ -0,0 +1,72 @@
+Tegra SOC USB PHY
+
+The device node for Tegra SOC USB PHY:
+
+Required properties :
+ - compatible : For Tegra20, must contain "nvidia,tegra20-usb-phy".
+ For Tegra30, must contain "nvidia,tegra30-usb-phy". Otherwise, must contain
+ "nvidia,<chip>-usb-phy" plus at least one of the above, where <chip> is
+ tegra114, tegra124, tegra132, or tegra210.
+ - reg : Defines the following set of registers, in the order listed:
+ - The PHY's own register set.
+ Always present.
+ - The register set of the PHY containing the UTMI pad control registers.
+ Present if-and-only-if phy_type == utmi.
+ - phy_type : Should be one of "utmi", "ulpi" or "hsic".
+ - clocks : Defines the clocks listed in the clock-names property.
+ - clock-names : The following clock names must be present:
+ - reg: The clock needed to access the PHY's own registers. This is the
+ associated EHCI controller's clock. Always present.
+ - pll_u: PLL_U. Always present.
+ - timer: The timeout clock (clk_m). Present if phy_type == utmi.
+ - utmi-pads: The clock needed to access the UTMI pad control registers.
+ Present if phy_type == utmi.
+ - ulpi-link: The clock Tegra provides to the ULPI PHY (cdev2).
+ Present if phy_type == ulpi, and ULPI link mode is in use.
+ - resets : Must contain an entry for each entry in reset-names.
+ See ../reset/reset.txt for details.
+ - reset-names : Must include the following entries:
+ - usb: The PHY's own reset signal.
+ - utmi-pads: The reset of the PHY containing the chip-wide UTMI pad control
+ registers. Required even if phy_type == ulpi.
+
+Required properties for phy_type == ulpi:
+ - nvidia,phy-reset-gpio : The GPIO used to reset the PHY.
+
+Required PHY timing params for utmi phy, for all chips:
+ - nvidia,hssync-start-delay : Number of 480 Mhz clock cycles to wait before
+ start of sync launches RxActive
+ - nvidia,elastic-limit : Variable FIFO Depth of elastic input store
+ - nvidia,idle-wait-delay : Number of 480 Mhz clock cycles of idle to wait
+ before declare IDLE.
+ - nvidia,term-range-adj : Range adjusment on terminations
+ - Either one of the following for HS driver output control:
+ - nvidia,xcvr-setup : integer, uses the provided value.
+ - nvidia,xcvr-setup-use-fuses : boolean, indicates that the value is read
+ from the on-chip fuses
+ If both are provided, nvidia,xcvr-setup-use-fuses takes precedence.
+ - nvidia,xcvr-lsfslew : LS falling slew rate control.
+ - nvidia,xcvr-lsrslew : LS rising slew rate control.
+
+Required PHY timing params for utmi phy, only on Tegra30 and above:
+ - nvidia,xcvr-hsslew : HS slew rate control.
+ - nvidia,hssquelch-level : HS squelch detector level.
+ - nvidia,hsdiscon-level : HS disconnect detector level.
+
+Optional properties:
+ - nvidia,has-legacy-mode : boolean indicates whether this controller can
+ operate in legacy mode (as APX 2500 / 2600). In legacy mode some
+ registers are accessed through the APB_MISC base address instead of
+ the USB controller.
+ - nvidia,is-wired : boolean. Indicates whether we can do certain kind of power
+ optimizations for the devices that are always connected. e.g. modem.
+ - dr_mode : dual role mode. Indicates the working mode for the PHY. Can be
+ "host", "peripheral", or "otg". Defaults to "host" if not defined.
+ host means this is a host controller
+ peripheral means it is device controller
+ otg means it can operate as either ("on the go")
+ - nvidia,has-utmi-pad-registers : boolean indicates whether this controller
+ contains the UTMI pad control registers common to all USB controllers.
+
+VBUS control (required for dr_mode == otg, optional for dr_mode == host):
+ - vbus-supply: regulator for VBUS
diff --git a/kernel/Documentation/devicetree/bindings/usb/ohci-nxp.txt b/kernel/Documentation/devicetree/bindings/usb/ohci-nxp.txt
new file mode 100644
index 000000000..71e28c101
--- /dev/null
+++ b/kernel/Documentation/devicetree/bindings/usb/ohci-nxp.txt
@@ -0,0 +1,24 @@
+* OHCI controller, NXP ohci-nxp variant
+
+Required properties:
+- compatible: must be "nxp,ohci-nxp"
+- reg: physical base address of the controller and length of memory mapped
+ region.
+- interrupts: The OHCI interrupt
+- transceiver: phandle of the associated ISP1301 device - this is necessary for
+ the UDC controller for connecting to the USB physical layer
+
+Example (LPC32xx):
+
+ isp1301: usb-transceiver@2c {
+ compatible = "nxp,isp1301";
+ reg = <0x2c>;
+ };
+
+ ohci@31020000 {
+ compatible = "nxp,ohci-nxp";
+ reg = <0x31020000 0x300>;
+ interrupt-parent = <&mic>;
+ interrupts = <0x3b 0>;
+ transceiver = <&isp1301>;
+ };
diff --git a/kernel/Documentation/devicetree/bindings/usb/ohci-omap3.txt b/kernel/Documentation/devicetree/bindings/usb/ohci-omap3.txt
new file mode 100644
index 000000000..ce8c47cff
--- /dev/null
+++ b/kernel/Documentation/devicetree/bindings/usb/ohci-omap3.txt
@@ -0,0 +1,15 @@
+OMAP HS USB OHCI controller (OMAP3 and later)
+
+Required properties:
+
+- compatible: should be "ti,ohci-omap3"
+- reg: should contain one register range i.e. start and length
+- interrupts: description of the interrupt line
+
+Example for OMAP4:
+
+usbhsohci: ohci@4a064800 {
+ compatible = "ti,ohci-omap3";
+ reg = <0x4a064800 0x400>;
+ interrupts = <0 76 0x4>;
+};
diff --git a/kernel/Documentation/devicetree/bindings/usb/ohci-st.txt b/kernel/Documentation/devicetree/bindings/usb/ohci-st.txt
new file mode 100644
index 000000000..6d8393748
--- /dev/null
+++ b/kernel/Documentation/devicetree/bindings/usb/ohci-st.txt
@@ -0,0 +1,37 @@
+ST USB OHCI controller
+
+Required properties:
+
+ - compatible : must be "st,st-ohci-300x"
+ - reg : physical base addresses of the controller and length of memory mapped
+ region
+ - interrupts : one OHCI controller interrupt should be described here
+ - clocks : phandle list of usb clocks
+ - clock-names : should be "ic" for interconnect clock and "clk48"
+See: Documentation/devicetree/bindings/clock/clock-bindings.txt
+
+ - phys : phandle for the PHY device
+ - phy-names : should be "usb"
+
+ - resets : phandle to the powerdown and reset controller for the USB IP
+ - reset-names : should be "power" and "softreset".
+See: Documentation/devicetree/bindings/reset/st,sti-powerdown.txt
+See: Documentation/devicetree/bindings/reset/reset.txt
+
+Example:
+
+ ohci0: usb@0xfe1ffc00 {
+ compatible = "st,st-ohci-300x";
+ reg = <0xfe1ffc00 0x100>;
+ interrupts = <GIC_SPI 149 IRQ_TYPE_NONE>;
+ clocks = <&clk_s_a1_ls 0>,
+ <&clockgen_b0 0>;
+ clock-names = "ic", "clk48";
+ phys = <&usb2_phy>;
+ phy-names = "usb";
+ status = "okay";
+
+ resets = <&powerdown STIH416_USB0_POWERDOWN>,
+ <&softreset STIH416_USB0_SOFTRESET>;
+ reset-names = "power", "softreset";
+ };
diff --git a/kernel/Documentation/devicetree/bindings/usb/omap-usb.txt b/kernel/Documentation/devicetree/bindings/usb/omap-usb.txt
new file mode 100644
index 000000000..38d9bb850
--- /dev/null
+++ b/kernel/Documentation/devicetree/bindings/usb/omap-usb.txt
@@ -0,0 +1,80 @@
+OMAP GLUE AND OTHER OMAP SPECIFIC COMPONENTS
+
+OMAP MUSB GLUE
+ - compatible : Should be "ti,omap4-musb" or "ti,omap3-musb"
+ - ti,hwmods : must be "usb_otg_hs"
+ - multipoint : Should be "1" indicating the musb controller supports
+ multipoint. This is a MUSB configuration-specific setting.
+ - num-eps : Specifies the number of endpoints. This is also a
+ MUSB configuration-specific setting. Should be set to "16"
+ - ram-bits : Specifies the ram address size. Should be set to "12"
+ - interface-type : This is a board specific setting to describe the type of
+ interface between the controller and the phy. It should be "0" or "1"
+ specifying ULPI and UTMI respectively.
+ - mode : Should be "3" to represent OTG. "1" signifies HOST and "2"
+ represents PERIPHERAL.
+ - power : Should be "50". This signifies the controller can supply up to
+ 100mA when operating in host mode.
+ - usb-phy : the phandle for the PHY device
+ - phys : the phandle for the PHY device (used by generic PHY framework)
+ - phy-names : the names of the PHY corresponding to the PHYs present in the
+ *phy* phandle.
+
+Optional properties:
+ - ctrl-module : phandle of the control module this glue uses to write to
+ mailbox
+
+SOC specific device node entry
+usb_otg_hs: usb_otg_hs@4a0ab000 {
+ compatible = "ti,omap4-musb";
+ ti,hwmods = "usb_otg_hs";
+ multipoint = <1>;
+ num-eps = <16>;
+ ram-bits = <12>;
+ ctrl-module = <&omap_control_usb>;
+ phys = <&usb2_phy>;
+ phy-names = "usb2-phy";
+};
+
+Board specific device node entry
+&usb_otg_hs {
+ interface-type = <1>;
+ mode = <3>;
+ power = <50>;
+};
+
+OMAP DWC3 GLUE
+ - compatible : Should be
+ * "ti,dwc3" for OMAP5 and DRA7
+ * "ti,am437x-dwc3" for AM437x
+ - ti,hwmods : Should be "usb_otg_ss"
+ - reg : Address and length of the register set for the device.
+ - interrupts : The irq number of this device that is used to interrupt the
+ MPU
+ - #address-cells, #size-cells : Must be present if the device has sub-nodes
+ - utmi-mode : controls the source of UTMI/PIPE status for VBUS and OTG ID.
+ It should be set to "1" for HW mode and "2" for SW mode.
+ - ranges: the child address space are mapped 1:1 onto the parent address space
+
+Optional Properties:
+ - extcon : phandle for the extcon device omap dwc3 uses to detect
+ connect/disconnect events.
+ - vbus-supply : phandle to the regulator device tree node if needed.
+
+Sub-nodes:
+The dwc3 core should be added as subnode to omap dwc3 glue.
+- dwc3 :
+ The binding details of dwc3 can be found in:
+ Documentation/devicetree/bindings/usb/dwc3.txt
+
+omap_dwc3 {
+ compatible = "ti,dwc3";
+ ti,hwmods = "usb_otg_ss";
+ reg = <0x4a020000 0x1ff>;
+ interrupts = <0 93 4>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ utmi-mode = <2>;
+ ranges;
+};
+
diff --git a/kernel/Documentation/devicetree/bindings/usb/pxa-usb.txt b/kernel/Documentation/devicetree/bindings/usb/pxa-usb.txt
new file mode 100644
index 000000000..9c331799b
--- /dev/null
+++ b/kernel/Documentation/devicetree/bindings/usb/pxa-usb.txt
@@ -0,0 +1,53 @@
+PXA USB controllers
+
+OHCI
+
+Required properties:
+ - compatible: Should be "marvell,pxa-ohci" for USB controllers
+ used in host mode.
+
+Optional properties:
+ - "marvell,enable-port1", "marvell,enable-port2", "marvell,enable-port3"
+ If present, enables the appropriate USB port of the controller.
+ - "marvell,port-mode" selects the mode of the ports:
+ 1 = PMM_NPS_MODE
+ 2 = PMM_GLOBAL_MODE
+ 3 = PMM_PERPORT_MODE
+ - "marvell,power-sense-low" - power sense pin is low-active.
+ - "marvell,power-control-low" - power control pin is low-active.
+ - "marvell,no-oc-protection" - disable over-current protection.
+ - "marvell,oc-mode-perport" - enable per-port over-current protection.
+ - "marvell,power_on_delay" Power On to Power Good time - in ms.
+
+Example:
+
+ usb0: ohci@4c000000 {
+ compatible = "marvell,pxa-ohci", "usb-ohci";
+ reg = <0x4c000000 0x100000>;
+ interrupts = <18>;
+ marvell,enable-port1;
+ marvell,port-mode = <2>; /* PMM_GLOBAL_MODE */
+ };
+
+UDC
+
+Required properties:
+ - compatible: Should be "marvell,pxa270-udc" for USB controllers
+ used in device mode.
+ - reg: usb device MMIO address space
+ - interrupts: single interrupt generated by the UDC IP
+ - clocks: input clock of the UDC IP (see clock-bindings.txt)
+
+Optional properties:
+ - gpios:
+ - gpio activated to control the USB D+ pullup (see gpio.txt)
+
+Example:
+
+ pxa27x_udc: udc@40600000 {
+ compatible = "marvell,pxa270-udc";
+ reg = <0x40600000 0x10000>;
+ interrupts = <11>;
+ clocks = <&pxa2xx_clks 11>;
+ gpios = <&gpio 22 GPIO_ACTIVE_LOW>;
+ };
diff --git a/kernel/Documentation/devicetree/bindings/usb/qcom,dwc3.txt b/kernel/Documentation/devicetree/bindings/usb/qcom,dwc3.txt
new file mode 100644
index 000000000..ca164e71d
--- /dev/null
+++ b/kernel/Documentation/devicetree/bindings/usb/qcom,dwc3.txt
@@ -0,0 +1,66 @@
+Qualcomm SuperSpeed DWC3 USB SoC controller
+
+Required properties:
+- compatible: should contain "qcom,dwc3"
+- clocks: A list of phandle + clock-specifier pairs for the
+ clocks listed in clock-names
+- clock-names: Should contain the following:
+ "core" Master/Core clock, have to be >= 125 MHz for SS
+ operation and >= 60MHz for HS operation
+
+Optional clocks:
+ "iface" System bus AXI clock. Not present on all platforms
+ "sleep" Sleep clock, used when USB3 core goes into low
+ power mode (U3).
+
+Required child node:
+A child node must exist to represent the core DWC3 IP block. The name of
+the node is not important. The content of the node is defined in dwc3.txt.
+
+Phy documentation is provided in the following places:
+Documentation/devicetree/bindings/phy/qcom,dwc3-usb-phy.txt
+
+Example device nodes:
+
+ hs_phy: phy@100f8800 {
+ compatible = "qcom,dwc3-hs-usb-phy";
+ reg = <0x100f8800 0x30>;
+ clocks = <&gcc USB30_0_UTMI_CLK>;
+ clock-names = "ref";
+ #phy-cells = <0>;
+
+ status = "ok";
+ };
+
+ ss_phy: phy@100f8830 {
+ compatible = "qcom,dwc3-ss-usb-phy";
+ reg = <0x100f8830 0x30>;
+ clocks = <&gcc USB30_0_MASTER_CLK>;
+ clock-names = "ref";
+ #phy-cells = <0>;
+
+ status = "ok";
+ };
+
+ usb3_0: usb30@0 {
+ compatible = "qcom,dwc3";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ clocks = <&gcc USB30_0_MASTER_CLK>;
+ clock-names = "core";
+
+ ranges;
+
+ status = "ok";
+
+ dwc3@10000000 {
+ compatible = "snps,dwc3";
+ reg = <0x10000000 0xcd00>;
+ interrupts = <0 205 0x4>;
+ phys = <&hs_phy>, <&ss_phy>;
+ phy-names = "usb2-phy", "usb3-phy";
+ tx-fifo-resize;
+ dr_mode = "host";
+ };
+ };
+
diff --git a/kernel/Documentation/devicetree/bindings/usb/renesas_usbhs.txt b/kernel/Documentation/devicetree/bindings/usb/renesas_usbhs.txt
new file mode 100644
index 000000000..ddbe304be
--- /dev/null
+++ b/kernel/Documentation/devicetree/bindings/usb/renesas_usbhs.txt
@@ -0,0 +1,27 @@
+Renesas Electronics USBHS driver
+
+Required properties:
+ - compatible: Must contain one of the following:
+ - "renesas,usbhs-r8a7790"
+ - "renesas,usbhs-r8a7791"
+ - reg: Base address and length of the register for the USBHS
+ - interrupts: Interrupt specifier for the USBHS
+ - clocks: A list of phandle + clock specifier pairs
+
+Optional properties:
+ - renesas,buswait: Integer to use BUSWAIT register
+ - renesas,enable-gpio: A gpio specifier to check GPIO determining if USB
+ function should be enabled
+ - phys: phandle + phy specifier pair
+ - phy-names: must be "usb"
+ - dmas: Must contain a list of references to DMA specifiers.
+ - dma-names : named "ch%d", where %d is the channel number ranging from zero
+ to the number of channels (DnFIFOs) minus one.
+
+Example:
+ usbhs: usb@e6590000 {
+ compatible = "renesas,usbhs-r8a7790";
+ reg = <0 0xe6590000 0 0x100>;
+ interrupts = <0 107 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&mstp7_clks R8A7790_CLK_HSUSB>;
+ };
diff --git a/kernel/Documentation/devicetree/bindings/usb/samsung-hsotg.txt b/kernel/Documentation/devicetree/bindings/usb/samsung-hsotg.txt
new file mode 100644
index 000000000..b83d428a2
--- /dev/null
+++ b/kernel/Documentation/devicetree/bindings/usb/samsung-hsotg.txt
@@ -0,0 +1,40 @@
+Samsung High Speed USB OTG controller
+-----------------------------
+
+The Samsung HSOTG IP can be found on Samsung SoCs, from S3C6400 onwards.
+It gives functionality of OTG-compliant USB 2.0 host and device with
+support for USB 2.0 high-speed (480Mbps) and full-speed (12 Mbps)
+operation.
+
+Currently only device mode is supported.
+
+Binding details
+-----
+
+Required properties:
+- compatible: "samsung,s3c6400-hsotg" should be used for all currently
+ supported SoC,
+- interrupt-parent: phandle for the interrupt controller to which the
+ interrupt signal of the HSOTG block is routed,
+- interrupts: specifier of interrupt signal of interrupt controller,
+ according to bindings of interrupt controller,
+- clocks: contains an array of clock specifiers:
+ - first entry: OTG clock
+- clock-names: contains array of clock names:
+ - first entry: must be "otg"
+- vusb_d-supply: phandle to voltage regulator of digital section,
+- vusb_a-supply: phandle to voltage regulator of analog section.
+
+Example
+-----
+
+ hsotg@12480000 {
+ compatible = "samsung,s3c6400-hsotg";
+ reg = <0x12480000 0x20000>;
+ interrupts = <0 71 0>;
+ clocks = <&clock 305>;
+ clock-names = "otg";
+ vusb_d-supply = <&vusb_reg>;
+ vusb_a-supply = <&vusbdac_reg>;
+ };
+
diff --git a/kernel/Documentation/devicetree/bindings/usb/samsung-usbphy.txt b/kernel/Documentation/devicetree/bindings/usb/samsung-usbphy.txt
new file mode 100644
index 000000000..33fd3543f
--- /dev/null
+++ b/kernel/Documentation/devicetree/bindings/usb/samsung-usbphy.txt
@@ -0,0 +1,117 @@
+SAMSUNG USB-PHY controllers
+
+** Samsung's usb 2.0 phy transceiver
+
+The Samsung's usb 2.0 phy transceiver is used for controlling
+usb 2.0 phy for s3c-hsotg as well as ehci-s5p and ohci-exynos
+usb controllers across Samsung SOCs.
+TODO: Adding the PHY binding with controller(s) according to the under
+development generic PHY driver.
+
+Required properties:
+
+Exynos4210:
+- compatible : should be "samsung,exynos4210-usb2phy"
+- reg : base physical address of the phy registers and length of memory mapped
+ region.
+- clocks: Clock IDs array as required by the controller.
+- clock-names: names of clock correseponding IDs clock property as requested
+ by the controller driver.
+
+Exynos5250:
+- compatible : should be "samsung,exynos5250-usb2phy"
+- reg : base physical address of the phy registers and length of memory mapped
+ region.
+
+Optional properties:
+- #address-cells: should be '1' when usbphy node has a child node with 'reg'
+ property.
+- #size-cells: should be '1' when usbphy node has a child node with 'reg'
+ property.
+- ranges: allows valid translation between child's address space and parent's
+ address space.
+
+- The child node 'usbphy-sys' to the node 'usbphy' is for the system controller
+ interface for usb-phy. It should provide the following information required by
+ usb-phy controller to control phy.
+ - reg : base physical address of PHY_CONTROL registers.
+ The size of this register is the total sum of size of all PHY_CONTROL
+ registers that the SoC has. For example, the size will be
+ '0x4' in case we have only one PHY_CONTROL register (e.g.
+ OTHERS register in S3C64XX or USB_PHY_CONTROL register in S5PV210)
+ and, '0x8' in case we have two PHY_CONTROL registers (e.g.
+ USBDEVICE_PHY_CONTROL and USBHOST_PHY_CONTROL registers in exynos4x).
+ and so on.
+
+Example:
+ - Exynos4210
+
+ usbphy@125B0000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "samsung,exynos4210-usb2phy";
+ reg = <0x125B0000 0x100>;
+ ranges;
+
+ clocks = <&clock 2>, <&clock 305>;
+ clock-names = "xusbxti", "otg";
+
+ usbphy-sys {
+ /* USB device and host PHY_CONTROL registers */
+ reg = <0x10020704 0x8>;
+ };
+ };
+
+
+** Samsung's usb 3.0 phy transceiver
+
+Starting exynso5250, Samsung's SoC have usb 3.0 phy transceiver
+which is used for controlling usb 3.0 phy for dwc3-exynos usb 3.0
+controllers across Samsung SOCs.
+
+Required properties:
+
+Exynos5250:
+- compatible : should be "samsung,exynos5250-usb3phy"
+- reg : base physical address of the phy registers and length of memory mapped
+ region.
+- clocks: Clock IDs array as required by the controller.
+- clock-names: names of clocks correseponding to IDs in the clock property
+ as requested by the controller driver.
+
+Optional properties:
+- #address-cells: should be '1' when usbphy node has a child node with 'reg'
+ property.
+- #size-cells: should be '1' when usbphy node has a child node with 'reg'
+ property.
+- ranges: allows valid translation between child's address space and parent's
+ address space.
+
+- The child node 'usbphy-sys' to the node 'usbphy' is for the system controller
+ interface for usb-phy. It should provide the following information required by
+ usb-phy controller to control phy.
+ - reg : base physical address of PHY_CONTROL registers.
+ The size of this register is the total sum of size of all PHY_CONTROL
+ registers that the SoC has. For example, the size will be
+ '0x4' in case we have only one PHY_CONTROL register (e.g.
+ OTHERS register in S3C64XX or USB_PHY_CONTROL register in S5PV210)
+ and, '0x8' in case we have two PHY_CONTROL registers (e.g.
+ USBDEVICE_PHY_CONTROL and USBHOST_PHY_CONTROL registers in exynos4x).
+ and so on.
+
+Example:
+ usbphy@12100000 {
+ compatible = "samsung,exynos5250-usb3phy";
+ reg = <0x12100000 0x100>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ clocks = <&clock 1>, <&clock 286>;
+ clock-names = "ext_xtal", "usbdrd30";
+
+ usbphy-sys {
+ /* USB device and host PHY_CONTROL registers */
+ reg = <0x10040704 0x8>;
+ };
+ };
diff --git a/kernel/Documentation/devicetree/bindings/usb/spear-usb.txt b/kernel/Documentation/devicetree/bindings/usb/spear-usb.txt
new file mode 100644
index 000000000..f8a464a25
--- /dev/null
+++ b/kernel/Documentation/devicetree/bindings/usb/spear-usb.txt
@@ -0,0 +1,39 @@
+ST SPEAr SoC USB controllers:
+-----------------------------
+
+EHCI:
+-----
+
+Required properties:
+- compatible: "st,spear600-ehci"
+- interrupt-parent: Should be the phandle for the interrupt controller
+ that services interrupts for this device
+- interrupts: Should contain the EHCI interrupt
+
+Example:
+
+ ehci@e1800000 {
+ compatible = "st,spear600-ehci", "usb-ehci";
+ reg = <0xe1800000 0x1000>;
+ interrupt-parent = <&vic1>;
+ interrupts = <27>;
+ };
+
+
+OHCI:
+-----
+
+Required properties:
+- compatible: "st,spear600-ohci"
+- interrupt-parent: Should be the phandle for the interrupt controller
+ that services interrupts for this device
+- interrupts: Should contain the OHCI interrupt
+
+Example:
+
+ ohci@e1900000 {
+ compatible = "st,spear600-ohci", "usb-ohci";
+ reg = <0xe1800000 0x1000>;
+ interrupt-parent = <&vic1>;
+ interrupts = <26>;
+ };
diff --git a/kernel/Documentation/devicetree/bindings/usb/twlxxxx-usb.txt b/kernel/Documentation/devicetree/bindings/usb/twlxxxx-usb.txt
new file mode 100644
index 000000000..0aee0ad3f
--- /dev/null
+++ b/kernel/Documentation/devicetree/bindings/usb/twlxxxx-usb.txt
@@ -0,0 +1,40 @@
+USB COMPARATOR OF TWL CHIPS
+
+TWL6030 USB COMPARATOR
+ - compatible : Should be "ti,twl6030-usb"
+ - interrupts : Two interrupt numbers to the cpu should be specified. First
+ interrupt number is the otg interrupt number that raises ID interrupts when
+ the controller has to act as host and the second interrupt number is the
+ usb interrupt number that raises VBUS interrupts when the controller has to
+ act as device
+ - usb-supply : phandle to the regulator device tree node. It should be vusb
+ if it is twl6030 or ldousb if it is twl6032 subclass.
+
+twl6030-usb {
+ compatible = "ti,twl6030-usb";
+ interrupts = < 4 10 >;
+};
+
+Board specific device node entry
+&twl6030-usb {
+ usb-supply = <&vusb>;
+};
+
+TWL4030 USB PHY AND COMPARATOR
+ - compatible : Should be "ti,twl4030-usb"
+ - interrupts : The interrupt numbers to the cpu should be specified. First
+ interrupt number is the otg interrupt number that raises ID interrupts
+ and VBUS interrupts. The second interrupt number is optional.
+ - <supply-name>-supply : phandle to the regulator device tree node.
+ <supply-name> should be vusb1v5, vusb1v8 and vusb3v1
+ - usb_mode : The mode used by the phy to connect to the controller. "1"
+ specifies "ULPI" mode and "2" specifies "CEA2011_3PIN" mode.
+
+twl4030-usb {
+ compatible = "ti,twl4030-usb";
+ interrupts = < 10 4 >;
+ usb1v5-supply = <&vusb1v5>;
+ usb1v8-supply = <&vusb1v8>;
+ usb3v1-supply = <&vusb3v1>;
+ usb_mode = <1>;
+};
diff --git a/kernel/Documentation/devicetree/bindings/usb/udc-xilinx.txt b/kernel/Documentation/devicetree/bindings/usb/udc-xilinx.txt
new file mode 100644
index 000000000..47b4e397a
--- /dev/null
+++ b/kernel/Documentation/devicetree/bindings/usb/udc-xilinx.txt
@@ -0,0 +1,18 @@
+Xilinx USB2 device controller
+
+Required properties:
+- compatible : Should be "xlnx,usb2-device-4.00.a"
+- reg : Physical base address and size of the USB2
+ device registers map.
+- interrupts : Should contain single irq line of USB2 device
+ controller
+- xlnx,has-builtin-dma : if DMA is included
+
+Example:
+ axi-usb2-device@42e00000 {
+ compatible = "xlnx,usb2-device-4.00.a";
+ interrupts = <0x0 0x39 0x1>;
+ reg = <0x42e00000 0x10000>;
+ xlnx,has-builtin-dma;
+ };
+
diff --git a/kernel/Documentation/devicetree/bindings/usb/usb-ehci.txt b/kernel/Documentation/devicetree/bindings/usb/usb-ehci.txt
new file mode 100644
index 000000000..0b04fdff9
--- /dev/null
+++ b/kernel/Documentation/devicetree/bindings/usb/usb-ehci.txt
@@ -0,0 +1,38 @@
+USB EHCI controllers
+
+Required properties:
+ - compatible : should be "generic-ehci".
+ - reg : should contain at least address and length of the standard EHCI
+ register set for the device. Optional platform-dependent registers
+ (debug-port or other) can be also specified here, but only after
+ definition of standard EHCI registers.
+ - interrupts : one EHCI interrupt should be described here.
+
+Optional properties:
+ - big-endian-regs : boolean, set this for hcds with big-endian registers
+ - big-endian-desc : boolean, set this for hcds with big-endian descriptors
+ - big-endian : boolean, for hcds with big-endian-regs + big-endian-desc
+ - needs-reset-on-resume : boolean, set this to force EHCI reset after resume
+ - clocks : a list of phandle + clock specifier pairs
+ - phys : phandle + phy specifier pair
+ - phy-names : "usb"
+ - resets : phandle + reset specifier pair
+
+Example (Sequoia 440EPx):
+ ehci@e0000300 {
+ compatible = "ibm,usb-ehci-440epx", "usb-ehci";
+ interrupt-parent = <&UIC0>;
+ interrupts = <1a 4>;
+ reg = <0 e0000300 90 0 e0000390 70>;
+ big-endian;
+ };
+
+Example (Allwinner sun4i A10 SoC):
+ ehci0: usb@01c14000 {
+ compatible = "allwinner,sun4i-a10-ehci", "generic-ehci";
+ reg = <0x01c14000 0x100>;
+ interrupts = <39>;
+ clocks = <&ahb_gates 1>;
+ phys = <&usbphy 1>;
+ phy-names = "usb";
+ };
diff --git a/kernel/Documentation/devicetree/bindings/usb/usb-nop-xceiv.txt b/kernel/Documentation/devicetree/bindings/usb/usb-nop-xceiv.txt
new file mode 100644
index 000000000..5be01c859
--- /dev/null
+++ b/kernel/Documentation/devicetree/bindings/usb/usb-nop-xceiv.txt
@@ -0,0 +1,41 @@
+USB NOP PHY
+
+Required properties:
+- compatible: should be usb-nop-xceiv
+
+Optional properties:
+- clocks: phandle to the PHY clock. Use as per Documentation/devicetree
+ /bindings/clock/clock-bindings.txt
+ This property is required if clock-frequency is specified.
+
+- clock-names: Should be "main_clk"
+
+- clock-frequency: the clock frequency (in Hz) that the PHY clock must
+ be configured to.
+
+- vcc-supply: phandle to the regulator that provides power to the PHY.
+
+- reset-gpios: Should specify the GPIO for reset.
+
+- vbus-detect-gpio: should specify the GPIO detecting a VBus insertion
+ (see Documentation/devicetree/bindings/gpio/gpio.txt)
+- vbus-regulator : should specifiy the regulator supplying current drawn from
+ the VBus line (see Documentation/devicetree/bindings/regulator/regulator.txt).
+
+Example:
+
+ hsusb1_phy {
+ compatible = "usb-nop-xceiv";
+ clock-frequency = <19200000>;
+ clocks = <&osc 0>;
+ clock-names = "main_clk";
+ vcc-supply = <&hsusb1_vcc_regulator>;
+ reset-gpios = <&gpio1 7 GPIO_ACTIVE_LOW>;
+ vbus-detect-gpio = <&gpio2 13 GPIO_ACTIVE_HIGH>;
+ vbus-regulator = <&vbus_regulator>;
+ };
+
+hsusb1_phy is a NOP USB PHY device that gets its clock from an oscillator
+and expects that clock to be configured to 19.2MHz by the NOP PHY driver.
+hsusb1_vcc_regulator provides power to the PHY and GPIO 7 controls RESET.
+GPIO 13 detects VBus insertion, and accordingly notifies the vbus-regulator.
diff --git a/kernel/Documentation/devicetree/bindings/usb/usb-ohci.txt b/kernel/Documentation/devicetree/bindings/usb/usb-ohci.txt
new file mode 100644
index 000000000..19233b736
--- /dev/null
+++ b/kernel/Documentation/devicetree/bindings/usb/usb-ohci.txt
@@ -0,0 +1,28 @@
+USB OHCI controllers
+
+Required properties:
+- compatible : "generic-ohci"
+- reg : ohci controller register range (address and length)
+- interrupts : ohci controller interrupt
+
+Optional properties:
+- big-endian-regs : boolean, set this for hcds with big-endian registers
+- big-endian-desc : boolean, set this for hcds with big-endian descriptors
+- big-endian : boolean, for hcds with big-endian-regs + big-endian-desc
+- no-big-frame-no : boolean, set if frame_no lives in bits [15:0] of HCCA
+- num-ports : u32, to override the detected port count
+- clocks : a list of phandle + clock specifier pairs
+- phys : phandle + phy specifier pair
+- phy-names : "usb"
+- resets : phandle + reset specifier pair
+
+Example:
+
+ ohci0: usb@01c14400 {
+ compatible = "allwinner,sun4i-a10-ohci", "generic-ohci";
+ reg = <0x01c14400 0x100>;
+ interrupts = <64>;
+ clocks = <&usb_clk 6>, <&ahb_gates 2>;
+ phys = <&usbphy 1>;
+ phy-names = "usb";
+ };
diff --git a/kernel/Documentation/devicetree/bindings/usb/usb-uhci.txt b/kernel/Documentation/devicetree/bindings/usb/usb-uhci.txt
new file mode 100644
index 000000000..298133416
--- /dev/null
+++ b/kernel/Documentation/devicetree/bindings/usb/usb-uhci.txt
@@ -0,0 +1,15 @@
+Generic Platform UHCI Controller
+-----------------------------------------------------
+
+Required properties:
+- compatible : "generic-uhci" (deprecated: "platform-uhci")
+- reg : Should contain 1 register ranges(address and length)
+- interrupts : UHCI controller interrupt
+
+Example:
+
+ uhci@d8007b00 {
+ compatible = "generic-uhci";
+ reg = <0xd8007b00 0x200>;
+ interrupts = <43>;
+ };
diff --git a/kernel/Documentation/devicetree/bindings/usb/usb-xhci.txt b/kernel/Documentation/devicetree/bindings/usb/usb-xhci.txt
new file mode 100644
index 000000000..86f67f088
--- /dev/null
+++ b/kernel/Documentation/devicetree/bindings/usb/usb-xhci.txt
@@ -0,0 +1,21 @@
+USB xHCI controllers
+
+Required properties:
+ - compatible: should be one of "generic-xhci",
+ "marvell,armada-375-xhci", "marvell,armada-380-xhci",
+ "renesas,xhci-r8a7790", "renesas,xhci-r8a7791" (deprecated:
+ "xhci-platform").
+ - reg: should contain address and length of the standard XHCI
+ register set for the device.
+ - interrupts: one XHCI interrupt should be described here.
+
+Optional properties:
+ - clocks: reference to a clock
+ - usb3-lpm-capable: determines if platform is USB3 LPM capable
+
+Example:
+ usb@f0931000 {
+ compatible = "generic-xhci";
+ reg = <0xf0931000 0x8c8>;
+ interrupts = <0x0 0x4e 0x0>;
+ };
diff --git a/kernel/Documentation/devicetree/bindings/usb/usb3503.txt b/kernel/Documentation/devicetree/bindings/usb/usb3503.txt
new file mode 100644
index 000000000..52493b148
--- /dev/null
+++ b/kernel/Documentation/devicetree/bindings/usb/usb3503.txt
@@ -0,0 +1,36 @@
+SMSC USB3503 High-Speed Hub Controller
+
+Required properties:
+- compatible: Should be "smsc,usb3503" or "smsc,usb3503a".
+
+Optional properties:
+- reg: Specifies the i2c slave address, it is required and should be 0x08
+ if I2C is used.
+- connect-gpios: Should specify GPIO for connect.
+- disabled-ports: Should specify the ports unused.
+ '1' or '2' or '3' are available for this property to describe the port
+ number. 1~3 property values are possible to be described.
+ Do not describe this property if all ports have to be enabled.
+- intn-gpios: Should specify GPIO for interrupt.
+- reset-gpios: Should specify GPIO for reset.
+- initial-mode: Should specify initial mode.
+ (1 for HUB mode, 2 for STANDBY mode)
+- refclk: Clock used for driving REFCLK signal (optional, if not provided
+ the driver assumes that clock signal is always available, its
+ rate is specified by REF_SEL pins and a value from the primary
+ reference clock frequencies table is used)
+- refclk-frequency: Frequency of the REFCLK signal as defined by REF_SEL
+ pins (optional, if not provided, driver will not set rate of the
+ REFCLK signal and assume that a value from the primary reference
+ clock frequencies table is used)
+
+Examples:
+ usb3503@08 {
+ compatible = "smsc,usb3503";
+ reg = <0x08>;
+ connect-gpios = <&gpx3 0 1>;
+ disabled-ports = <2 3>;
+ intn-gpios = <&gpx3 4 1>;
+ reset-gpios = <&gpx3 5 1>;
+ initial-mode = <1>;
+ };
diff --git a/kernel/Documentation/devicetree/bindings/usb/usbmisc-imx.txt b/kernel/Documentation/devicetree/bindings/usb/usbmisc-imx.txt
new file mode 100644
index 000000000..3539d4e7d
--- /dev/null
+++ b/kernel/Documentation/devicetree/bindings/usb/usbmisc-imx.txt
@@ -0,0 +1,16 @@
+* Freescale i.MX non-core registers
+
+Required properties:
+- #index-cells: Cells used to descibe usb controller index. Should be <1>
+- compatible: Should be one of below:
+ "fsl,imx6q-usbmisc" for imx6q
+ "fsl,vf610-usbmisc" for Vybrid vf610
+ "fsl,imx6sx-usbmisc" for imx6sx
+- reg: Should contain registers location and length
+
+Examples:
+usbmisc@02184800 {
+ #index-cells = <1>;
+ compatible = "fsl,imx6q-usbmisc";
+ reg = <0x02184800 0x200>;
+};
diff --git a/kernel/Documentation/devicetree/bindings/usb/ux500-usb.txt b/kernel/Documentation/devicetree/bindings/usb/ux500-usb.txt
new file mode 100644
index 000000000..439a41c79
--- /dev/null
+++ b/kernel/Documentation/devicetree/bindings/usb/ux500-usb.txt
@@ -0,0 +1,50 @@
+Ux500 MUSB
+
+Required properties:
+ - compatible : Should be "stericsson,db8500-musb"
+ - reg : Offset and length of registers
+ - interrupts : Interrupt; mode, number and trigger
+ - dr_mode : Dual-role; either host mode "host", peripheral mode "peripheral"
+ or both "otg"
+
+Optional properties:
+ - dmas : A list of dma channels;
+ dma-controller, event-line, fixed-channel, flags
+ - dma-names : An ordered list of channel names affiliated to the above
+
+Example:
+
+usb_per5@a03e0000 {
+ compatible = "stericsson,db8500-musb";
+ reg = <0xa03e0000 0x10000>;
+ interrupts = <0 23 0x4>;
+ interrupt-names = "mc";
+
+ dr_mode = "otg";
+
+ dmas = <&dma 38 0 0x2>, /* Logical - DevToMem */
+ <&dma 38 0 0x0>, /* Logical - MemToDev */
+ <&dma 37 0 0x2>, /* Logical - DevToMem */
+ <&dma 37 0 0x0>, /* Logical - MemToDev */
+ <&dma 36 0 0x2>, /* Logical - DevToMem */
+ <&dma 36 0 0x0>, /* Logical - MemToDev */
+ <&dma 19 0 0x2>, /* Logical - DevToMem */
+ <&dma 19 0 0x0>, /* Logical - MemToDev */
+ <&dma 18 0 0x2>, /* Logical - DevToMem */
+ <&dma 18 0 0x0>, /* Logical - MemToDev */
+ <&dma 17 0 0x2>, /* Logical - DevToMem */
+ <&dma 17 0 0x0>, /* Logical - MemToDev */
+ <&dma 16 0 0x2>, /* Logical - DevToMem */
+ <&dma 16 0 0x0>, /* Logical - MemToDev */
+ <&dma 39 0 0x2>, /* Logical - DevToMem */
+ <&dma 39 0 0x0>; /* Logical - MemToDev */
+
+ dma-names = "iep_1_9", "oep_1_9",
+ "iep_2_10", "oep_2_10",
+ "iep_3_11", "oep_3_11",
+ "iep_4_12", "oep_4_12",
+ "iep_5_13", "oep_5_13",
+ "iep_6_14", "oep_6_14",
+ "iep_7_15", "oep_7_15",
+ "iep_8", "oep_8";
+};